1500 Series Computer Table Assembly

ASSEMBLY INSTRUCTIONS /
1500 SERIES COMPUTER TABLE
Find Smith Carrel 1500 Series Computer Tables @demco.com
Search: 1369212
Call 800.962.4463 or email custserv@demco.com
1. Place the table top upside down on a clean. smooth. surface. Assemble the frame and legs together.
· Position the wire management tray at the rear next to the two grommet holes. Place the 90 degree flange of
the wire management tray under the leg bracket and next to the table top. Push leg brackets into rails until
all holes on legs and rails are aligned. Attach to the table top with (20) #10 x 3//' Phillips head screws into
the predrilled holes in the top. Do not tia=hten any screws until all screws have been partiallv started.
Be careful not to,�trip the wood by over tightening.
2. Install the glides into the bottom of the fixed height leg or assemble the adjustable leg stems to the main
leg by setting at the desired table height and securing in place with the machine screws provided.
3. Place the table into position in the room and level· the unit to the floor using the adjustable glides. Adjust
glides a� needed_ for all four legs to contact the floor fim1ly. Install the plastic grommets into the cutouts
in the work surface.
75099 Glide (4)
69828 Fixed Legs (4)
-OR----69827 Adjustable Legs (4)
0
Wire Management
Tray
I
***Two persons required for assembly***