INTERNATIONAL
Item#
Project
French Press Grinder
Date
Features
Portion Control Grinder
• Accommodates up to 8” (20.3 cm) tall French press or funnel for drip-style brewer.
• Multi-batch setting allows users to specify a French press brew size or grind enough
coffee into a funnel to brew larger amounts of drip-style coffee.
• Professional grind provided by large 33/16” (8.1 cm) diameter burrs powered by quiet,
low speed, high torque motor.
• Equipped with commercial grinding burrs to provide maximum grinding precision for
small amounts of coffee.
• Four-year warranty on grinding burrs.
• Can use Gourmet C Funnel for heavier throw weights of coffee.
• Tested to CE Standards.
FPGA-2 DBC Additional Features
• Two hoppers can hold 3 lbs. (1.36 kg) each of regular and decaf or specialty beans.
• Digital touchpad for front of machine programming and LCD read-out.
FPGA-2 DBC
(French press not available)
Dimensions: 22.4”H x 8.3”W x 10”D
(56.8cm H x 21.1cm W x 25.4cm D)
FPGA
(Funnel sold separately)
Dimensions: 20”H x 8.6”W x 10”D
(50.8cm H x 21.8cm W x 25.4cm D)
For current specification sheets and other information, go to www.bunn.com.
International models may vary in appearance.
Related Products
Precision Burrs
All BUNN grinders use precision burrs to
cut (not crush) the coffee beans and deliver
consistent grind distribution. BUNN burrs
are rated at a Rockwell hardness of 66C,
resulting in an exceptionally long burr life. Short French Press Funnel
Product Number: 38124.0000
Kit, Fine Grind
Product Number: 43724.0000
Gourmet C Funnel
Product No.: 34559.0000 (7.12” wide)
34559.0001 (7.62” wide)
Gourmet C Funnel Paper Filter Pack
Product No.: 20157.0000
6/12
C1.6
Dimensions & Specifications
Model
FPGA-2 DBC (50 Hz)
Product #
Volts
Amps
36400.0003
230
1.5
Capacity Shipping
per hopper Weight
1.4 kg
13.4 kg
Plug
Attached
no plug
(3 lbs.)
(29.6 lbs.)
FPGA (50 Hz)
36800.0132
230
1.5
2.72 kg
11.2 kg
A
FPGA (50Hz)
36800.0137
230
1.5
2.72 kg
11.2 kg
B
FPGA (50/60 Hz)
36800.0123 220-230 1.5
2.72 kg
(6 lbs.)
11.2 kg
(23 lbs.)
E
Agency
Electrical: 220-240 volt models require 2-wires plus ground service rated 220-240V, single phase, 50/60 Hz., 3⁄4 HP motor.
Plug Type
Model FPGA-2 DBC
(A)
EURO CE
(B)
UK CE
(E)
KETI
Model FPGA
Bunn-O-Matic® Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • USA • +1-217-529-6601 • Fax +1-217-529-2827 • www.bunn.com
BUNN® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in centimeters.
6/12 © Bunn-O-Matic Corporation