Discharging station for chemicals »WK-FLEXLINE

Discharging station for chemicals »WK-FLEXLINE«
The flexible solution for the safe loading of chemical storage tanks
}Space-saving and installation with minimal effort
}No complex structural measures required
}Designed for indoor and outdoor application
}TÜV-tested system
}Can be operated by only one person
protection
k
r
a
m
e
d
e
Tra
ted with th
submit
Office
Trade Mark
d
n
a
t
n
te
German Pa
w w w. we b e r - k u n s t s t o f f t e c h n i k . d e
w w w. we b e r - k u n s t s to f f te c h n i k . d e
Discharging station for chemicals »WK-FLEXLINE«
With this system, we offer the plant operators a compact solution
for the filling according to the General Provisions Relating to
Waters of tanks for road tanks.
An essential part of the »WK-FLEXLINE« is a safety collecting
tray made of chemical resistant PE 100-RC, which is adjusted to
the correct position for the discharging process using the folding
mechanism. If the collecting tray is folded up, the space requirement is reduced by 2/3. The lowering and lifting of the collecting
tray is effected using an electrical cable winch. Due to this fact, it is
possible that the »WK-FLEXLINE« is operated by only one person. In
order to additionally secure particularly critical areas (e.g. connection road tanks – hose), two pluggable splash guard elements are
included in the standard equipment.
Consisting of:
Freestanding supporting frame
} Material: steel, galvanised
Inclusive:
} Anchoring plates for the ground fixation
} Cable winch, electrical
} Weather protection cap (PE) for cable winch
} Spring bolt for the locking of the collection tray in stationary
position
} Apron made of plastics for the discharging of leaked products
from the filling cabinet into the collecting tray
} Supporting frame with tipping device for the support of the
collecting tray and attachment point for cable winch/steel cable
Safety collecting tray
The assembly effort is solely limited to the ground anchoring of the
steel frame and the electrical connection of the cable winch.
Depending on the version, it is possible to integrate up to five filling
cabinets.
The discharging station is protected against unauthorised access
via a lockable power switch.
In order to ensure a safe access to the discharging station, a GRP
grate serves as anti skid layer.
} Material: PE 100-RC
} Manufactured according to the building inspection approval
Z-40.22-254 of the DIBt.
} Welded construction made of extruded plate material
Inclusive:
} Splash guard elements (pluggable)
} Straps for the locking in stationary position
} GRP grate (removable) as anti skid layer
Sizes/Dimensions
Technical data:
Discharging station for chemicals »WK-FLEXLINE-2«
Version for up to 2 filling stations
} Installation sizes (approx.):
} 1,800 x 4,000 x 3,500 mm (in discharging position)
} 1,800 x 1,500 x 3,500 mm (in stationary position)
} Suitable for non-flammable, water polluting liquids
} Trade mark protected and TÜV-tested system
} Designed for indoor and outdoor installation
} Safety collection tray:
} Outer dimension (approx.): 3,000 x 1,500 x 300 mm
} Collecting volume (approx.): 700 Litres
Discharging station for chemicals »WK-FLEXLINE-3«
Version for 3 filling stations
} Installation sizes (approx.):
} 2,300 x 4,000 x 3,500 mm (in discharging position)
} 2,300 x 1,500 x 3,500 mm (in stationary position)
} Safety collecting tray:
} Outer dimension (approx.): 3,000 x 2,000 x 300 mm
} Collecting volume (approx.): 1,000 Litres
Discharging station for chemicals »WK-FLEXLINE-4«
Version for 4 filling stations
} Installation sizes (approx.):
} 2,800 x 4,000 x 3,500 mm (in discharging position)
} 2,800 x 1,500 x 3,500 mm (in stationary position)
} Safety collecting tray:
} Outer dimension (approx.): 3,000 x 2,500 x 300 mm
} Collecting volume (approx.): 1,200 Litres
Discharging station for chemicals »WK-FLEXLINE-5«
Version for 5 filling stations
} Installation sizes (approx.):
} 3,300 x 4,000 x 3,500 mm (in discharging position)
} 3,300 x 1,500 x 3,500 mm (in stationary position)
} Safety collecting tray:
} Outer dimension (approx.): 3,000 x 3,000 x 300 mm
} Collecting volume (approx.): 1,500 Litres
Optional equipment
Filling cabinet, a Weber product
} Tubing behind the filling valve: guided upwards
(junction with bushing)
} Material: PE-HD
} Material tubing/braces/fittings: PVC
} Valve: Manual diaphragm valve, alternative automatic
diaphragm valve
} Nominal width of connection: DN 50 to DN 80
} Material seals: EPDM/Viton/Teflon
} Version and equipment per fold:
} Bottom tray designed as drip tray, equipped with a discharge
nozzle DN15 with ball valve
} Plug door, lockable (padlock on-site)
} Filling port with connection thread R 2“
} Permanently mounted filling valve with seal
} Return valve
} Filling vehicle connector with chain and cover, material:
VA-ECTFE
Sample configuration: The design and the equipment of the
filling cabinets are selected according to customer’s request
and requirements according to the stored medium.
Legal basis
In order to avoid a pollution of the water or another permanent
change of its characteristics, according to the Law Relating to Waters (WHG) everyone must take care according to the conditions
during actions which may be connected with influences to a water...
(Extract from WHG § 1a, paragraph 2)
The regulations on units for the handling of substances hazardous
to water (VAwS) declare:
Units must be designed and operated in such a way that
Point 1.
substances hazardous to water may not escape. Units must be
tight, stable and sufficiently resistant against mechanical, thermal
and chemical influences…
Point 3.
escaping substances hazardous to water will be reliably detected
and restrained…
(Extract from VAwS § 3, requirements, paragraph 2)
Gerhard Weber Kunststoff-Verarbeitung GmbH
Production: Mühlendamm 28 | D - 32429 Minden
Harkortdamm 32 und 53 | D - 32429 Minden
Administration: Mitteldamm 65a | D - 32429 Minden
Warehouse: Harkortdamm 31 | D - 32429 Minden
Phone +49 (0) 5 71 / 9 56 05-0 | Fax +49 (0) 5 71 / 9 56 05-1 99
info@weber-kunststofftechnik.de | www.weber-kunststofftechnik.de