200 WATT 3U PLUG-IN POWER SUPPLY
FEATURES
4 For VME or cPCI Applications
4 Conduction-Cooled Through the Card Edge
(No Airflow Needed)
4 Choice of Connectors
GENERAL SPECIFICATIONS
INPUT
Standard airborne single phase, 115Vac, 400Hz
(Power Factor Corrected)
OUTPUTS
4 Wedge-Lock Option Available
3.3Vdc @ 41A = 135W
5Vdc @ 8A = 40W
+12Vdc @ 1A = 12W
-12Vdc @ 1A = 12W
4 HALT & HASS Tested to Ensure Reliability
POWER LEVEL
4 MIL-STD-704 and RTCA/DO-160D Compliant
200W
EFFICIENCY
80%+ efficiency
DIMENSIONS
2.4” x 5.2” x 9.3” (including fold-down handle)
(61mm x 132mm x 236mm )
WEIGHT
3.5lbs (1.6kg)
PROTECTION CIRCUITRY
Over-voltage, Short circuit, Over current, No load, Input surge
STATUS SIGNAL
For primary input power and output regulation
HOLD-UP CIRCUITRY
50ms (military aircraft) or 200ms (commercial aircraft)
EMI COMPLIANCE
To DO-160D for conducted emissions and conducted susceptibility
OPERATING TEMP
-20ºC to +70ºC (card edge) / Non-operating Temp -55ºC to +85C
36 Newburgh Road | Hackettstown, NJ07840
t: 908 850 5088 | f: 908 850 0540
tdipower.com | 17559 MHA
MTBF
> 100,000 hours (per MIL-HDBK-217)
This data sheet is believed to be correct at time of publication and Transistor Devices, Inc. accepts no responsibility
for consequences from printing errors or inaccuracies. Specifications are subject to change without notice.
Note that the exact product shown on this data sheet may not be available for purchase due to prior contractual
obligations. Please contact TDI for current available products or to discuss a modification to an existing design.
DEMANDING APPLICATIONS DEMAND TDI POWER