09/2013
Mod: PCF-A2
Production code: MQOF0A200000
CONTENT
CONTENT......................................................................................................................................................... 2
GENERAL............................................................................................................................................................ 4
Introduction...............................................................................................................................................................4
Warnings.....................................................................................................................................................................4
Precautions.................................................................................................................................................................4
Intended use...............................................................................................................................................................4
Facts & weight............................................................................................................................................................5
General function description.................................................................................................................................5
OVERVIEW OF COMPONENTS......................................................................................................... 6
Front view...................................................................................................................................................................6
A-2................................................................................................................................................................................6
DA-4.............................................................................................................................................................................7
Thermos A..................................................................................................................................................................8
Mega Gold A..............................................................................................................................................................9
Function................................................................................................................................................................... 10
A-2, DA-4................................................................................................................................................................. 10
Mega Gold A, Thermos A...................................................................................................................................... 11
INSTALLATION AND START-UP...................................................................................................... 12
Positioning............................................................................................................................................................... 12
Water connection.................................................................................................................................................. 12
Electrical connection............................................................................................................................................. 13
Hot plate function.................................................................................................................................................. 13
First time start-up.................................................................................................................................................. 14
OPERATION.................................................................................................................................................. 15
Brewing with coffee............................................................................................................................................... 15
To keep temperature and aroma........................................................................................................................ 17
CLEANING AND CARE......................................................................................................................... 18
Rinse thermos, decanter and serving station................................................................................................... 18
Dayly cleaning......................................................................................................................................................... 19
Weekly cleaning...................................................................................................................................................... 19
Cleaning serving station....................................................................................................................................... 20
Exterior cleaning.................................................................................................................................................... 20
PROGRAMMING........................................................................................................................................ 21
Adjust water amount............................................................................................................................................ 21
Adjust brew time................................................................................................................................................... 21
2
CONTENT
POSSIBLE SOLUTION............................................................................................................................. 22
Fault and solution................................................................................................................................................... 22
DIMENSION................................................................................................................................................... 23
A-2............................................................................................................................................................................. 23
DA-4.......................................................................................................................................................................... 24
Thermos A............................................................................................................................................................... 25
Mega Gold A........................................................................................................................................................... 26
Serving Station........................................................................................................................................................ 27
Some important information may appear in textboxes seen below
IMPORTANT!
INFO.
CAUTION!
INFO.
More INFO.
Note
INFO.
3
GENERAL
Introduction
Thank you for choosing a ORIGINAL LINE coffee brewer.
We hope you enjoy it !
Read the user guide before using the machine.
This guide contains important instructions for
proper and safe use of the vending machine.
Always
keep this guide close at hand for future
reference.
Warnings
Never
immerse the machine, plug or mains
cable in water because there is a danger of
electric shock.
The appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning the use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure they
do not play with the appliance.
not use the machine if the mains cable, plug
Do
is damaged or the machine has fallen down.
If the mains cable is damaged it must be
replaced by the manufacturer, service agent or
similarly qualified persons in order to avoid a
hazard.
Only plug the machine into a properly installed
earthed safety socket whose line voltage
matches the technical data for the machine.
Precautions
not use the machine outdoors so it can be
Do
exposed to weather (rain, snow, frost). It will
cause material damage to the machine.
Do not try to open the machine or repair it in
any way. To avoid danger only have the machine
repaired in a technical workshop, Service
Centre or by a qualified person.
Remove the mains cable from the socket when
the machine is not in use for longer periods. To
do this, pull the plug not the cable.
This appliance must be placed in a horizontal
position which is resistant to any water that
may leak.
Place the machine out of the reach of children.
Position the mains cable so that people cannot
trip over it. Keep it away from sharp edges and
heat sources.
The new hose-sets supplied with this appliance
are to be used, old hose-sets must not be reused.
This appliance is not suitable for installation in
an area where a water jet could be used.
This appliance must not be cleaned by a water
jet.
Intended use
This
appliance is intended to be used in
household and similar applications such as:
- Staff kitchen areas in shops.
- Offices and other commercial working
environments.
- On agricultural estates.
- By clients in hotels, motels and other
residential type environments.
- Bed and breakfast type environments.
4
the optimal performance of the machine
For
these parameters shall not be exceeded:
- Maximum permissible inlet water pressure :
800KPa (8Bar)
- Minimum permissible inlet water pressure:
200KPa (2Bar)
- Maximum working temperature: 40°ºC
- Minimum working temperature: 10°ºC
GENERAL
Facts & weight
FACTS
A-2
DA-4
Thermos A
Mega Gold A
428, 205, 410
mm
428, 410, 410
mm
557, 205, 410
mm
655, 205, 445
mm
1.8 L
2x1.8 L
2.2 L
2.5 L
Power supply
220-230V 1N
~ 2390W
50/60Hz
400V 2N
~ 4780 W
220-230V 1N
~ 2200W
50/60Hz
220-230V 1N
~ 2200W
50/60Hz
Brew Options
4-12 Cups
4-12 Cups
4-15 Cups
4-17 Cups
Capacity
15 L/h
30 L/h
15 L/h
19 L/h
Brew time
6min
6min
7min
8.5min
Hot plates
2
4
None
None
Height, Width, Depth
Thermos/decanter volume
Water connection
MODEL/NAME
Weight
Cold water 1/2 R*
A-2
DA-4
Thermos A
Mega Gold A
9 kg
15.5 kg
10 kg
11.5 kg
General function description
The Coffee brewer is equipped with a key pad for automatic water filling.
The key pad allows you to adjust the number of cups for each brewing.
The water tank is fitted with a float switch that will activate heating unit when water is filled, this
starts the brew process. During the brewing process a lamp will be lit on the machine’s right side.
When the tank is empty of water the heater unit will be switched off and the lamp will be turned off.
A brew process takes around 6~8.5min to complete.
5
OVERVIEW OF COMPONENTS
Front view
PCF-A2
Glass decanter
Upper hot plate
Tank Lid
Filiter Holder
Power Switch
Display
Glass decanter
Lower hot plate
6
OVERVIEW OF COMPONENTS
Function
A-2, DA-4
ON-OFF button for display
and lower hot plate.
Shows the number of cups.
Display is blinking when brewing.
Increase the number of cups.
Decrease the number of cups.
Starts brewing.
During a brewing you may press
this button to stop the brew
process.
10
ON-OFF button
For upper hot plate.
OVERVIEW OF COMPONENTS
Function
Mega Gold A, Thermos A
ON - OFF button.
Shows the number of cups.
Display is blinking when brewing.
Increase the number of cups.
Decrease the number of cups.
Starts brewing.
During a brewing you may press
this button to stop the brew
process.
11
INSTALLATION AND START-UP
Positioning
Min. 10cm
Min. 10cm
Place the machine on a flat horizontal surface that will support the weight of
the machine.
Note
Make sure air is able to circulate behind the machine
(minimum 10cm).
Water connection
A
Connect
the supplied water hose to the cold water connection using a ½’’
R-connection(A). When pushing the machine into position make sure there is
no interference to the hose to ensure proper water flow.
Water supply to the machine is the customer’s responsibility according to
instruction and advice from the supplier.
In areas with high level lime problem, a descaling filter should be mounted.
Note
12
The new hose set supplied with the appliance shall be used and
that old hose sets shall not be reused. Connection to a closable
valve is recommended. Min. water pressure; 2bar (200kPa). Max.
waterpressure; 8bar (800kPa).
INSTALLATION AND START-UP
Electrical connection
A-2, THERMOS A, MEGA GOLD A
IMPORTANT!
Connect the plug to a separate earthed wall socket.
220-230V 50-60Hz, 10 Amp.
DA-4
The
brewer is not reconnectable and may only be installed to the electric
supply network with a voltage that is stated on the brewer and shall be carried
out by an authorized electrician.
Recommended:
install a line circuit breaker and a earth fault breaker to the
machine.
AUTION!
C
Connection to a separate 2 phase only
- Brewer should be connected to 400V with zero and earth.
- Use 10 Amp fuses.
IMPORTANT!
Electrical
installations must be done of an certificated electrician: 400V 2N/
4780 W
Hot plate function
II Upper hot plate
Turn on left power switch: I for lower hot plate,
and right power switch: II for upper hot plate.
Ensure that the lamps turn on and that the hot plates get
warm.
I
II
Turn off power switches I and II when not in use.
I Lower hot plate
13
INSTALLATION AND START-UP
First time start-up
A
I
A
IMPORTANT!
First time you use the machine do the first brewing with water only.
Slide the filter holder into position without filter and coffee.
Turn on the power switch(A).
Select 12,15 or 17 cups by adjusting
CAUTION!
A thermos or
decanter must
always be in the
machine when
brewing is in
progress.
14
or
button.
Place the thermos or decanter under the filter holder.
Press the button
to start the brew process.
After
20-30 seconds water shall start to pour into the filterholder and down
in the thermos or decanter.
When brewing is completed, empty the thermos or decanter.
A whole brew process takes around 6~8 minutes.
OPERATION
Brewing with coffee
Recommended
powder amount is
60g/L
Place a 90mm filter in the filter holder.
01
Add coffee (restaurant / catering
ground coffee). Make sure that the
coffee is evenly spread.
02
Slide
the filter
holder into
position.
03
I
A
Turn on power switch( I / A) to activate the
dispaly and key pad.
04
15
OPERATION
Place
the thermos or decanter
under the filterholder.
05
Choose number of cups for your brewing by using the buttons described
below.
- Press the
button to increase number of cups
- Press the
button to decrease number of cups
When you have selected your desired number of cups press the
button to start brewing. During the brew process the number in
the dispaly will blink.
When the brewing is completed the display will stop blinking and a
3 second beep will be heard from the machine.
It is now safe to remove the thermos or decanter.
CAUTION!
Under no circumstances
fill brewed coffee or coffee
powder into the water
tank . It may cause machine
damage.
16
CAUTION!
Do not remove
decanter or thermos
before display have
stoped blinking and
ready beep has
been heard, it can
cause serious spill
and burns.
Tips
Do not mix freshly brewed
coffee with old coffee kept
warm. It will result in poor
coffee quality.
06
OPERATION
To keep temperature and aroma
A
Tips for keeping
coffee hot
Pre-heat the serving
station, start a brewing
with only water into
the serving station.
When brewing is
complete let it stand
for about 1 hour. Pour
out the water. Then
start a brew with
coffee.
To keep temperature and aroma, put the lid (A) back on the serving station
immediately after the brewing.
IMPORTANT!
The temperature in the serving station will decrease with ~1.5°C/h. There is
~30ml of coffee standing in the tubes from the inner container to the coffee
faucet. This part is not insulated and will drop in temperature much faster.
If the serving station haven’t been used in 1h the first cup can be lower in
temperature. Cups after the first will not be affected of this.
Tips for
achieving the
best quality
Do not change the recommended portion of coffee.
Do not mix freshly brewed coffee with old coffee.
Always rinse the serving station before next brew.
Empty the filter holder from filter and coffee grounds
directly after a brew.
Dispense 50ml of coffee every hour to always have fresh and hot coffee to the faucet.
17
CLEANING AND CARE
Rinse thermos, decanter and serving station
Before each brewing, rinse the thermos, decanter or serving station with fresh tap water.
When cleaning the outside, use a soft rag with liquid cleaning agent to prevent scratches.
CAUTION!
The machine should not be submerged in water
or washed in a dishwasher. it will result in machine
damage.
18
CLEANING AND CARE
Dayly cleaning
Wash
the thermos, decanter(B) and the filter holder with liquid solution for coffee machines. Always
remove the filter immediately and clean the filter holder daily, coffee will get moldy.
Clean the spray nozzle(A) and the surrounding area.
Use a soft rag and liquid solution that does not scratch.
A
B
B
Pitcher
Pt. no.110351
Weekly cleaning
Descaling and cleaning.
Pour 50 ml descaling / cleaning solution in a decanter and fill it up with cold water.
Pour the mixture in the machine and proceed with a brewing without a filterpaper or coffee.
Rinse the machine thoroughly by brewing at least 3 times with clean water so that the particles from
descaling solution disappear.
Regular descaling will ensure optimum brewing performance and a longer life of the machine.
When cleaning the decanter in a dishwasher. Dismantle lid and place decanter upside down in the
dishwasher.(A)
A
Descaling agent
Pt. no. 110412
19
CLEANING AND CARE
Cleaning serving station
A
Disassemble the level tube and clean it
every week with the enclosed brush.
Take off the main lid and clean the mixer
tube(A).
Cleaning of serving station 2.5 L
IMPORTANT!
Rinse the inside of
the serving station
several times with
fresh tap water.
Fill the serving station with hot water. ( Full
brewing without coffee and filter ).
Put 1 tablespoon with cleaning powder in the
serving station and wait at least 15 minutes.
Tap out 2/3 of the cleaning solution.
Clean the serving station with the cleaning brush.
Rinse the serving station with fresh tap water
several times before reuse.
OPTIONS
Part No.
110102-02
CLEANING PARTS
Cleaning powder
1104231
Cleaning brush
1103360
Cleaning brush for level tube,
mixer tube
Exterior cleaning
When
cleaning exterior of the
machine, use a soft rag with liquid
cleaning agent to prevent scratches.
20
PROGRAMMING
Adjust water amount
Adjust amount of brew water
Press the buttons
and
at same time in 5 seconds.
The buzzer beeps twice. Display shows 0.
- Press the
button to increase amount of water.
- Press the
button to decrease amount of water.
- 1 step = 5%
- Press the
button to confirm the change.
ADJUSTMENTS
5 = 25%
4 = 20%
3 = 15%
2 = 10%
1 = 5%
0
- 1 = - 5%
- 2 = -10%
- 3 = - 15%
- 4 = - 20%
- 5 = - 25%
Adjust brew time
Adjust the brew time
Press the buttons
and
at same time in 5 seconds.
The buzzer beeps four times. Display shows 0.
- Press the
button to increase brewing time.
- Press the
button to decrease brewing time.
- 1 step = 5%
- Press the
Display shows
button to confirm the change.
and machine is ready to use.
21
POSSIBLE SOLUTION
Fault and solution
FAULT
IMPORTANT!
All maintenance
and installations
must be done
of an authorized
technician.
22
POSSIBLE SOLUTION
Power switch does not lit
Check plug connection to wall socket.
Check fuse in plug.
Check if hot plate becomes warm, if so
replace power switch.
Hot plate does not become
warm although switch is lit.
Check connection to hot plate.
If hot plate is defective, replace.
Brewer excess steam.
Machine may require descaling.
Spray nozzel may need unblocking.
Hose may be bent.
Inlet to boiler may be blocked. Descale
machine - if boiler still defective - replace.
Machine will not brew.
Check overheating protection.
Check microswicth.
Check connection to boiler.
Boiler unit may need replacing.
The machine does not take
in water
Make sure water tap is open.
Make sure the water hose is not bent.
Check inlet valve.
Check that the display is blinking.
The machines does not
stop taking in water.
Dirt in the inlet valve.
inlet valve is defective - replace
PCB is defective - replace
The machine is giving
wrong amount of water.
Check water tap.
Water hose is bent.
Dirt in inlet valve.
Water amount adjustment set in display is
adjusted faulty. Adjust according to page 21.
Defect floatregulator in inlet valve - replace
DIMENSION
PCF-A2
A
D
E
F
B
C
Model
A
B
C
D
E
F
PCF-A2
595mm
205mm
410mm
428mm
578mm
360mm
23