J64003352-R02 DSDSR12 en Export - V

Operating instructions
Ceiling hood DSDSR12
Range hood
Thank you for choosing to buy one of our products. Your appliance is made to
high standards and is easy to use. Nevertheless, please take the time to read
these operating instructions in order to familiarise yourself with the appliance
and get the best use out of it.
Please follow the safety precautions.
Modifications
Text, diagrams and data correspond to the technical standard of the appliance
at the time these operating instructions went to press. The right to make technical modifications for the purpose of the further development of the appliance
is reserved.
Validity
The product family (model number) corresponds to the first alphanumerics on
the identification plate. These operating instructions apply to:
Type
Product family
Size system
64003
120
DSDSR12
Variations depending on the model are noted in the text.
© V-ZUG Ltd, CH-6301 Zug, 2016
2
Table of contents
1 Safety precautions
5
1.1
Symbols used ........................................................................................................ 5
1.2
General safety precautions ................................................................................. 6
1.3
Before using for the first time ............................................................................. 6
1.4
Correct use............................................................................................................. 7
1.5
Children in the home............................................................................................ 7
1.6
Note on use ........................................................................................................... 8
2 Disposal
10
3 Appliance description
11
3.1
Extraction model ................................................................................................. 11
3.2
Recirculation model with recirculation box .................................................... 11
3.3
Equipment ............................................................................................................ 11
3.4
Construction......................................................................................................... 12
3.5
Operating and display elements ...................................................................... 13
3.6
Remote control .................................................................................................... 14
4 Operation
15
4.1
Activating/deactivating the remote control .................................................... 15
4.2
Switching the appliance on/off......................................................................... 15
4.3
Switching the illumination on/off ...................................................................... 16
4.4
Changing the light intensity............................................................................... 16
4.5
Changing the power level ................................................................................. 16
4.6
Switching the intensive level on / off before time......................................... 17
4.7
Switching the after-running time on / off before time .................................. 17
4.8
Switching the CleanAir function on / off before time ................................... 18
4.9
Saturation indicator for metal grease filters................................................... 18
4.10
Operation using the operating and display elements.................................. 19
5 Care and maintenance
21
5.1
Cleaning the housing ......................................................................................... 21
5.2
Cleaning the metal grease filters ..................................................................... 22
6 Trouble-shooting
6.1
24
What to do if ... .................................................................................................... 24
7 Accessories and spare parts
25
8 Technical data
26
9 Index
27
10 Notes
29
3
11 Service & Support
4
31
1
Safety precautions
1.1
Symbols used
Denotes important safety precautions.
Failure to observe said precautions can result in injury or in damage
to the appliance or fittings!
Information and precautions that should be observed.
Information on disposal
Information about the operating instructions
▸ Indicates step-by-step instructions.
– Describes how the appliance reacts to the steps taken.
▪ Indicates a list.
5
1 Safety precautions
1.2
General safety precautions
▪ Read the operating instructions before using the appliance for
the first time!
▪ This appliance can be used by children aged 8 and above
and by persons with reduced physical, sensory or mental capabilities, or lack of experience and/or knowledge, provided
they are supervised or have been instructed on the safe use
of the appliance and have understood the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be undertaken by children without supervision.
▪ If an appliance is not equipped with a mains cable and a plug
or other means for disconnecting from the mains with a contact opening on each pole complying with the conditions of
overvoltage category III for full isolation, an isolating device
must be incorporated into the permanently installed electrical
installation in accordance with the installation regulations.
▪ If the mains cable of this appliance is damaged, it must be replaced by the manufacturer or its Customer Services or a similarly qualified person in order to avoid hazard.
1.3
Before using for the first time
▪ The appliance must be installed and connected to the electricity supply in
accordance with the separate installation instructions. Have a qualified fitter/
electrician carry out the necessary work.
▪ When extracting fumes, please observe the official regulations.
▪ Dispose of the packaging material in accordance with local regulations.
6
1 Safety precautions
1.4
Correct use
▪ The appliance is designed for use in the home for extracting cooking
odours from above a cooking area.
▪ Any repairs, modifications or manipulations to the appliance, especially any
electrically live parts, may only be carried out by the manufacturer, its Customer Services or a similarly qualified person. Repairs if carried out incorrectly could cause serious injury or damage to the appliance and fittings as
well as affect the functioning of the appliance. If the appliance is not working properly or in case of a repair order, follow the instructions given in the
'Service & Support' section. If necessary, please contact our Customer Services.
▪ Use original spare parts only.
▪ Retain these operating instructions for future reference. If you sell the appliance or pass it on to a third party, please ensure these operating instructions accompany the appliance, together with the instructions on installation.
In this way, the new owner can inform themselves about how to use the appliance correctly and read the pertinent safety precautions.
1.5
Children in the home
▪ Packaging material, e.g. plastic film and polystyrene, can be dangerous for
children. Danger of suffocation! Keep packaging material away from children.
▪ The appliance is designed for use by adults who are familiar with these operating instructions. Children are often unable to recognize the danger of
electrical appliances. Ensure proper supervision and do not allow children
to play with the appliance – there is a danger that children could hurt themselves.
7
1 Safety precautions
1.6
Note on use
▪ If the appliance is visibly damaged, do not use it. Contact our Customer
Services.
▪ If the appliance is not functioning properly, disconnect it from the power
supply immediately.
▪ If the mains cable of the appliance is damaged, it must be replaced by Customer Services in order to avoid hazard.
▪ Caution: Accessible parts may become hot when used with cooking appliances.
▪ Make sure the room is adequately ventilated when operating the range
hood at the same time as other appliances that burn gas or other fuels.
▪ Do not flambé food underneath the appliance. Metal grease filters if laden
with grease could catch fire.
▪ When frying on the cooking surface, do not leave the appliance unattended.
The cooking oil in the frying appliance could overheat and catch fire. Constantly monitor the temperature of the cooking oil, keeping it below the temperature at which it can catch fire. Change the cooking oil regularly – dirty
oil catches fire more easily than clean oil.
▪ Observe the cleaning intervals. Failure to do so can increase the fire hazard
due to the build-up of grease in the metal grease filters.
▪ Do not operate the individual cooking zones of the cooking surface without
a pan on them or with an empty pan on them so as to avoid damaging the
appliance or the kitchen fittings through a build-up of heat. Avoid open fires
with oil, gas, wood and coal fired cookers.
▪ Ensure there is adequate ventilation when the extractor fan is on so as to
avoid creating a disturbing underpressure in the kitchen and to achieve optimal air extraction.
▪ Avoid a cross-current of air, which could blow the cooking vapours over the
cooking area.
▪ If other appliances – fuelled by gas or other fuels – are being used at the
same time, ensure that there is a sufficient supply of fresh air. This does not
apply to air recirculation appliances.
▪ If other firing systems are being used at the same time (e.g. wood, gas, oil
or coal fired heating appliances), safe operation is only possible providing a
room negative pressure of 4 Pa (0.04 mbar) is not exceeded at the location
of the appliance. Risk of toxic fumes! An adequate flow of fresh air must be
guaranteed e.g. via non-closable openings in doors or windows and in combination with an air-intake/exhaust-air wall box or by other technical means.
8
1 Safety precautions
▪ When carrying out maintenance work on the appliance, including replacing
the light bulb, cut off the electricity supply to the appliance: remove the
screw fuse from the holder or switch the circuit breaker off, or disconnect
from the mains supply.
▪ When cleaning the appliance make sure no water gets inside the appliance.
Use a moderately damp cloth. Do not spray the inside or outside of the appliance with water. Do not use a steam cleaner. If water gets inside the appliance, it can cause damage.
9
2
Disposal
Packaging
▪ All packaging materials (cardboard, plastic film (PE) and polystyrene (EPS))
are marked and should, if possible, be collected for recycling and disposed
of in an environmentally friendly way.
Disconnection
▪ Disconnect the appliance from the mains. With a fixed appliance, this is to
be carried out by a qualified electrician!
Safety
▪ Disable the appliance to prevent accidents caused by improper use, especially through children playing.
▪ Pull the plug out of the mains socket or have the appliance disconnected
from the mains by an electrician. Then cut the mains cable off flush with the
appliance.
Disposal
▪ The old appliance should not be discarded as worthless rubbish. If disposed of correctly, the raw materials can be recovered for recycling.
▪ The
symbol on the identification plate warns that the appliance may not
be disposed of in normal household waste.
▪ The appliance must be disposed of in accordance with local regulations on
waste disposal. For more information on the handling, disposal and recycling of the product, please contact the local authorities, the local recycling
facilities for household waste or the retailer from whom you purchased the
appliance.
10
3
Appliance description
The appliance is designed for use in the home for extracting cooking fumes
and smells from above the cooking surface.
The appliance is used in extraction mode.
3.1
Extraction model
A fan draws cooking fumes and smells from above the cooking area. The
metal grease filters clean the extracted air, which is passed through a connecting pipe fitted with an integrated non-return valve and through the air duct to
the outside.
When in use, ensure there is a sufficient supply of fresh air to replace
the air that is being extracted.
3.2
Recirculation model with recirculation box
After being filtered through the metal grease filters, the cooking fumes and
smells above the cooking area are passed through a recirculation box with integrated activated charcoal filters. The filtered air is then circulated back into
the room.
3.3
▪
▪
▪
▪
Equipment
1 extractor fan
4 metal grease filters
Illumination
Remote control
The extractor fan has 4 power levels:
▪ 1 = low, 2 = medium, 3 = high, and intensive level.
▪ Power levels 1–3 are suitable for continuous operation.
▪ The intensive level is used for short bursts of intensive extraction of cooking
fumes and smells, e.g. when searing meat. The intensive level runs for six
minutes.
11
3 Appliance description
3.4
Construction
1
2
4
3
1
Operating and display elements
2
Metal grease filters
3
Folding panel
4
Illumination
12
3 Appliance description
3.5
Operating and display elements
2
3
I
Infrared port for remote control
Switches the illumination on/off and changes the light intensity
Switches power level 1 and remote control on/off
2
Switches power level 2 on/off
3
Switches power level 3 on/off
I
Switches intensive power level on and resets the saturation indicator
Saturation indicator for metal grease filters
Depending on the model and features, the specification of the appliance may differ from the standard specification described here.
13
3 Appliance description
3.6
Remote control
This appliance can be controlled by remote control, which requires standard
1.5 V LR03-AAA alkali zinc-carbon batteries (not supplied).
Do not place the remote control near heat sources. Please dispose
of the batteries according to the applicable regulations.
Operating and display elements
Switches the illumination on/off and changes the light intensity
Switches the appliance on/off
Reduces the power level step by step
Increases the power level step by step
i
Switches the intensive level on / off before time
Switches the after-running time and CleanAir function on / off before
time
14
4
Operation
4.1
Activating/deactivating the remote control
The appliance can be operated using the operating and display elements on
the appliance or using the remote control.
We recommend operating the appliance using the remote control.
▸ When the appliance is switched off, hold the
button depressed for five
seconds.
– The LED on the
button flashes twice.
– The appliance can now be operated using the remote control.
▸ When the appliance is switched off, hold the
button depressed for five
seconds again.
– The LED on the
button flashes once.
– The appliance can only be operated using the operating and display
elements again.
4.2
Switching the appliance on/off
▸ Press the
button.
– The appliance switches on at power level 1.
▸ Press the
button again.
– The appliance switches off.
15
4 Operation
4.3
Switching the illumination on/off
▸ Press the
button.
– The illumination switches on at maximum intensity.
▸ Press the
button again.
– The illumination switches off at maximum intensity.
4.4
Changing the light intensity
▸ When the illumination is switched on, hold the
button depressed for two
seconds.
– The light intensity lowers.
▸ When the light intensity is low, press the
button.
– The light intensity increases.
▪ The illumination switches off if, prior to this, the
button has been held depressed for two seconds when the light intensity is low or if it is pressed
when the light intensity is normal.
The illumination can be used independently of the extractor fan.
4.5
Changing the power level
▸ Press the
button.
– The next lowest power level is set.
▸ Press the
button.
– The next highest power level is set.
16
4 Operation
4.6
Switching the intensive level on / off before time
▸ Press the i button.
– The I
button illuminates.
– The intensive level switches on.
▪ If a power level had been running beforehand, then the appliance will automatically revert to this power level after six minutes have elapsed.
▪ If the appliance had not been switched on beforehand, then the appliance
will automatically switch off after six minutes have elapsed.
▸ Press the i button again.
– The I
button light goes out.
– The intensive level switches off before time.
4.7
Switching the after-running time on / off before time
During after-running time, the motor, fan blades and illumination run for a further 30 minutes and then switch off.
The after-running time can only be selected using the remote control.
▸ Press the
button.
▸ Press the
reached.
or
button repeatedly until the desired power level is
▸ Press the
button.
– The after-running time switches on.
– The LED for the corresponding power level flashes once per second
for 30 minutes.
▸ Press the
button again.
– The LED for the corresponding power level does not flash any more.
– The after-running time switches off before time.
17
4 Operation
4.8
Switching the CleanAir function on / off before time
The air extraction is switched on every hour for ten minutes at power level 1.
After 24 hours, the CleanAir function switches off.
The CleanAir function can only be selected using the remote control.
▸ Hold the
button depressed for two seconds.
– The CleanAir function switches on.
– The LED on the
button flashes twice per second.
▸ Hold the
button depressed for two seconds again.
– The LED on the
button goes out.
– The CleanAir function switches off before time.
4.9
Saturation indicator for metal grease filters
After 100 operating hours, the saturation indicator
flashes when the range
hood is switched on and off. The saturation level has been reached and the
metal grease filters must be cleaned.
Resetting the saturation indicator
▸ Switch the appliance and the illumination off.
▸ Hold the 3
button depressed for three seconds.
– The LED on the 3
button flashes three times.
– The saturation indicator
goes out.
18
4 Operation
4.10
Operation using the operating and display elements
Switching the appliance on/off
▸ Press the
/ 2
/ 3
or I
button.
– The LED on the corresponding button is illuminated.
– The corresponding power level switches on.
▸ Press the
button again.
– The appliance switches off.
Switching the illumination on/off
▸ Press the
button.
– The illumination switches on at maximum intensity.
▸ Press the
button.
– The illumination switches off at maximum intensity.
Changing the light intensity
▸ When the illumination is switched on, hold the
button depressed for
two seconds.
– The light intensity lowers.
▸ When the light intensity is low, press the
button.
– The light intensity increases.
The illumination can be used independently of the extractor fan.
Changing the power level
▸ Press the
/ 2
or 3
button.
– The LED on the corresponding button is illuminated.
– The corresponding power level switches on.
Switching the intensive level on / off before time
▸ Press the I
button.
– The LED on the I
button is illuminated.
▪ If a power level had been running beforehand, then the appliance will automatically revert to this power level after six minutes have elapsed.
19
4 Operation
▪ If the appliance had not been switched on beforehand, then the appliance
will automatically switch off after six minutes have elapsed.
▸ Press the
/ 2
or 3
button.
– The LED on the I
button goes out.
– The intensive level switches off before time.
– The corresponding power level switches on.
20
5
Care and maintenance
5.1
Cleaning the housing
Ensure that no water gets into the housing of the appliance! If water
gets into the housing, it can cause damage.
Do not use abrasive cleaners, scouring pads, steel wool, etc. for
cleaning as the surface could otherwise be damaged.
Remove the screw fuse or switch off the circuit breaker.
Cleaning the outside
▸ When the appliance is switched off, swing the panel downwards.
▸ Clean the outside with a damp cloth and neutral cleaning agent.
Cleaning the inside
Grease and condensed water can build up on the inside next to the grease
filters.
▸ Clean the inside with a damp cloth and neutral cleaning agent.
21
5 Care and maintenance
5.2
Cleaning the metal grease filters
The grease filters can be cleaned.
Select an «intensive» – or «heavy» – dishwasher programme with a
warm pre-wash. Cleaning may cause the grease filter to become discoloured. This will not affect the functioning of the filter in any way.
Removing
▸ Swing the panels 1 downwards.
▸ Push the handle 2 backwards and
pull the grease filter 3 downwards.
2 3
1
Do not damage the metal grease filters.
22
5 Care and maintenance
Cleaning
The metal grease filters must be cleaned at least every two months with normal use or whenever the saturation indicator
is switched on. If properly
cared for, the service life of the metal grease filters is the same as the service
life of the hood.
▸ Clean the metal grease filters in the dishwasher.
▸ Select an «intensive» – or «heavy» – dishwasher programme with a warm
pre-wash.
Installation
▸ Insert each grease filter 3 into the
support 4.
▸ Push the handle 2 backwards and
let the grease filter 3 lock into the
support at the top.
▸ Swing the panels 1 upwards.
4
2 3
1
Recirculation mode with recirculation box
For care and maintenance as well as for replacing the activated charcoal filters, see the instructions for the recirculation box.
23
6
Trouble-shooting
6.1
What to do if ...
… the illumination is not working
Possible cause
Solution
▪ Fuse or automatic circuit
breaker for electrical installations in the home is
defective.
▸ Replace the fuse.
▸ Reset the automatic circuit breaker.
▪ An interruption in the
power supply.
▸ Check the power supply.
▪ LED is defective.
▸ Inform Customer Services.
… the appliance is not extracting enough air
Possible cause
Solution
▪ Grease filters are dirty.
▸ Clean the grease filters.
▪ The fresh air intake is insufficient.
▸ Ensure the fresh air intake is sufficient.
▪ Only for recirculation
model with recirculation
box: The activated charcoal filters are saturated.
▸ Replace the activated charcoal filters.
24
7
Accessories and spare parts
Please give product family of the appliance and exact designation of the accessory or spare part when ordering parts.
Metal grease filter
Activated charcoal filter for the recirculation box
25
8
Technical data
Electrical connection
▸ See identification plate.
▸ Remove the metal grease filters.
– The identification plate is located on the inside of the appliance.
26
9
Index
Cleaning .............................................. 22
Installing .............................................. 22
Removing............................................ 22
Saturation indicator ........................... 18
A
Accessories ................................................... 25
Activated charcoal filter ............................... 11
After-running time.......................................... 17
Appliance, switching on/off
Hood .................................................... 19
Remote control .................................. 15
Model number ................................................. 2
N
Notes ............................................................... 29
C
Children in the home...................................... 7
CleanAir function........................................... 18
Cleaning
Housing ............................................... 21
O
Operating elements
Hood .................................................... 13
Remote control .................................. 14
Construction................................................... 12
P
D
Packaging ...................................................... 10
Disconnection................................................ 10
Power level
Hood .................................................... 19
Remote control .................................. 16
Display elements
Hood .................................................... 13
Remote control .................................. 14
Product family.................................................. 2
Disposal.......................................................... 10
R
E
Electrical connection .................................... 26
Equipment ...................................................... 11
Extraction model ........................................... 11
Recirculation model with recirculation box
.................................................................. 11
Remote control.............................................. 14
Activating/deactivating ..................... 15
I
S
Identification plate......................................... 26
Safety .............................................................. 10
Illumination
Hood .................................................... 19
Remote control .................................. 16
Intensive level
Hood .................................................... 19
Remote control .................................. 17
Safety precautions
Before using for the first time ............ 6
Children in the home ........................... 7
Correct use............................................ 7
General................................................... 6
Note on use........................................... 8
L
Light intensity
Hood .................................................... 19
Remote control .................................. 16
M
Malfunction
Appliance is not extracting enough air
.............................................................. 24
Illumination not working ................... 24
Metal grease filter
Saturation indicator....................................... 18
Service & Support......................................... 31
Spare parts .................................................... 25
Symbols ............................................................ 5
T
Technical data ............................................... 26
Technical questions...................................... 31
Type................................................................... 2
V
Validity............................................................... 2
27
W
Warranty extensions ..................................... 31
What to do if
The illumination is not working ....... 24
What to do if …
The appliance is not extracting
enough air........................................... 24
28
10
Notes
29
30
11
Service & Support
The «Troubleshooting» chapter provides valuable information for dealing with
minor operating faults. This saves you the time, effort and potential cost of having
to call out a service technician.
Information on the V-ZUG warranty can be found at www.vzug.com →Service →Warranty information. Please read this information carefully.
Please register your V-ZUG appliance online immediately at www.vzug.com →Service
→Warranty registration. This will allow you to take advantage of the best possible support
in the event of an fault in the appliance during the warranty period. You will require the
serial number (FN) and appliance designation to complete the registration process. This
information can be found on the identification plate for your appliance.
My appliance information:
FN: ___________________
Appliance: _____________________
Always have this appliance information to hand when you contact V-ZUG. Thank you.
▸ Remove the metal grease filter.
– The identification plate is located on the inside of the appliance.
Your repair order
At www.vzug.com →Service→Service number you will find the telephone number of your
nearest V‑ZUG service centre.
Technical questions, accessories, warranty extensions
V-ZUG is happy to help you with any general administrative or technical queries, to take
your orders for accessories and spare parts and to inform you about our progressive service agreements.
31
Quick instructions
Please first read the safety precautions in the operating instructions!
Activate the remote control
▸ When the appliance is switched off, hold the
button depressed for five
seconds.
– The LED on the
button flashes twice.
– The appliance can now be operated using the remote control.
Operating and display elements of the remote control
Switches the illumination on/off and changes the light intensity
Switches the appliance on/off
Reduces the power level step by step
Increases the power level step by step
i
Switches the intensive level on / off before time
Switches the after-running time and CleanAir function on / off before time
J64003352-R03
V-ZUG Ltd, Industriestrasse 66, CH-6301 Zug
info@vzug.com, www.vzug.com