joar rsaha ara dh haka-b bangl lades h

JOAR
RSAHA
ARA DH
HAKA-B
BANGLLADESH
Dated: 28/07//2017
INDIA
A - 1st & 2nd Flo
oor, Doon Building, Plot No.230
0, Block A - 2, S
Sector - 17, Dwa
arka, New Delhi - 110078, Ph no
o: + 91 - 011 - 43
3505228/29
U.A.E
E - Dubai Airporrt Free Trade Zo
one, 3rd East Wing
W
Building, 4tth Floor, P.O Bo
ox- 54620, Duba
ai 54620, U.A.E, Ph no: + 971 - 563738349
5
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
PREAMBLE
The tenders being invited are for JW MARRIOT-JOARSAHARA DHAKA-BANGLADESH, The following
tender specifications are included:
•
•
Modular Kitchen Equipment.
Custom Built Kitchen Equipment.
The bidders are required to follow the instruction given and “return the said document duly filled in with
rates”.
The Following is to be mentioned in the envelope “Quotation of C.B. & M.K.E for JW MARRIOTJOARSAHARA DHAKA-BANGLADESH,
Quotations should be in the name of:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------The owners reserve the right to reject any tender or a part of tender without giving any reason and do not bind
themselves to accept lowest or any tender.
The owners will not be responsible for, nor pay for any expenses or losses, which may be incurred by the bidders
in preparation and submission of the tender.
Before the acceptance of any offer, visits may be made by the owners or consultants to the bidders work to inspect
the facilities and satisfy themselves on technical and operational matters. The bidders shall afford whatever
assistance is required in this process.
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 2 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
GENERAL SPECIFICATIONS FOR CUSTOM BUILD EQUIPMENTS
STAINLESS STEEL:
Where stainless steel is specified it shall be what is known to the trade as Austenitic 18-B type 304, 2B finish, with
content from 17% to 19% chrome, 7 % to 9% nickle and a maximum carbon content of 0.11.
Stainless steel shall be free from scale and surfaces should be polished to a no. 4 commercial finish.
STAINLESS STEEL PIPE AND TUBING:
Seamless tubing shall be thoroughly and properly ground smooth and finished to match adjacent work. All tubing
where exposed to view shall be given a final grand of not less then 180 grit emery.
STRUCTURAL STEEL SHAPES:
All angles, band, channels or other structural shapes used for framing shall be of domestic manufacture uniform
and ductile in quality, free of hard spots, runs, checks or cracks or other surface defects. Where such sections are
specified as S.S. or tinned by the hot dip process, with all fluxes removed.
HANDLES, BRACKETS, LOCKING DEVICES AND HARD WARE:
Wherever equipments are provided with handles, knobs, hinges, brackets or other misc. hardware all shall be
either of heavy stain finish chrome plated brass or stainless steel.
All drawers, enclosed cabinets, refrigerators storage bins, shall be furnished with extra heavy duty security type
locking devices of cylinder type, chrome plated.
FASTENINGS:
Welds, bolts screws, nuts and washers shall be of steel, except where brass or stainless steel is fastened, in which
case they shall be of brass or stainless steel respectively. Where dissimilar metals are fastened, bolts, screws and
nuts shall be of the highest grade metal. The spacing and extent of welds, bolts and screws shall be such as to
ensure suitable fastenings and prevent bulging of the material fastened and should not be exposed.
WELDING:
All welding shall be done by the electrical fusion, metal –arc method. Carbon-arc or gas welding will not be
permitted. All welding shall be done in a thorough manner, with welding rod of some composition as sheets or
parts welded. Welds shall be complete welds, strong and ductile, with excess metal ground off joints finished
smooth to match adjoining sheet surfaces. All joints in top of fixtures, tables, drain boards; exposed shelving, sinks
etc. shall be welded. All equipment here in specified which is constructed in more then one piece of sheet of metal,
shall be continuously Welded together with welds ground smooth and polished. But welds made by spot welding
straps under beams and filling in the voids with solder and finished by grinding, will not be accepted.
It is the intention of this specification that all welded joints shall be homogenous with the sheet metal itself. Where
sheet sizes necessitate a joint, such a joint shall be welded. Tops of fixtures shall be fabricated in the factory with
welded joints to reduce field joints to a minimum. Where fixtures joins the tops of such fixtures Shall be
continuous with welded joints except in the case of field joints. Al joints made in the field shall be closely butted,
pulled together in the field, field welded and polished smooth in accordance with section. Grinding, polishing
finishing if these requirements. Tops of fixtures shall be of maximum length and with welded factory joints to an
absolute minimum. Wherever welds occur on the surfaces not finished by grinding & polishing, such welds sand
the accompanying discoloration shall be suitably coated in the factory by means of metallic base paint. To prevent
the possibility of progressive corrosion of such joints.
GRINDING, POLISHING, AND FINISHING:
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 3 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
All welded exposed joints shall be suitably ground flush with adjoining material and neatly finish harmonizing
herewith. Wherever material has been sunken or depressed by the welding operation, such depression will be
suitably hammered and pressed flush to adjoining surfaces and if necessary again ground to eliminate low spots.
All ground surfaces shall then be polished or buffed to match adjoining surfaces, consistent with good
workmanship. Care shall be exercised in all grinding operations to avoid excessive heating of metal & metal
discoloration. In all cases, grain of rough grinding shall be removed by successive polishing operations. Texture of
final polishing operation shall be uniform and smooth consistent with reasonable care and good workmanship.
General finish of all equipment shall be of high grade.
But joints and contact joints, wherever they occur, shall be close fitting and shall not require solder as filler. In no
case in any soldering for strength and stability of joint and fixture itself. Wherever breaks bend occur, it shall be
free from undue extrude and shall not be flaky scaly or cracked in appearance and where such break work does
mar the uniform surface appearance of the material. All such marks shall be removed by suitably grinding,
polishing and finishing. Wherever shared edges occur they shall be free from burrs, fins or irregular projections
and shall be finished over such sheared edges. Where mitres are bull nosed corners occur they shall be neatly
finished with under edge of material neatly ground to a uniform condition and, in no case any over lapping
materials to be accepted.
It is the intention of these specifications to cover equipment of quality finish consistent with high grade
manufacturing practices. All exposed surfaces shall be of no 4 finish expect trim, which is to be more highly
polished satin finish. Where specified all doors cabinets, shelves, whether inside /outside of cabinets and wherever
exposed are to be no. four 4 finish. This applies to inside finish of any cabinet having door s or otherwise an
exposed surface shall be interpreted as meaning an inside surface exposed to view when a sliding or swinging door
is opened. Underside of shelf need not to be 4 finishes but such finish shall be at least equal to 80-ground finish.
Final no. 4 finishes being factory finish, not as furnished by mill. Indication of die markings not blending with
final finish will not be accepted.
BOLT CONSTRUCTION:
It is the intention of this specification that all equipment on exposed surfaces and wherever bolts are used to fasten
trim to paneling and body of warmers, cabinets, counters etc. and more particularly to fasten tops of counter, dish
tables etc. to top of framing such bolts and screws occur on the inside of the fixtures and are either visible or might
come in the contact of the hands or the wiping cloth, such bolts, screws shall be capped with a suitable lock washer
and chrome plated, brass or bronze acorn nut . Where screw nuts are not visible or readily accessible, they may be
capped with a standard lock washer & steel nut treated to prevent rusting & corroding. Wherever bolts and screws
are welded to underside of trim or tops, the revere side of weld shall be f\neatly finished uniform with the
adjoining surface of trim or top, depressions at these points will not be acceptable.
SOUND DEADENING:
Underside of all stainless steel top for tables, counters, sink dishes and pot table with angle framework shall be
treated with a coating of Carbonize aluminum finish or approved equal.
MATERIAL AND WORKMANSHIP:
All material equipment etc. shall be new and of kind specified and shall be in undamaged condition when turned
over to owner. All workmanship shall be of best quality of crafts men skilled in their respective trades. Appliances
shall be of rigid construction free from objectionable vibrations and quiet in operation. Manufacture’s nameplate
shall not appear on any of the fabricated equipment.
RESERVATIONS:
Various items are specified here in with the model no., brand or trade names or name of manufacturer, and it is the
intent of this specification that the exact fixture so specified shall be furnished. This is not intended to restrict
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 4 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
competition and consideration will be given to other brands that are equal or superior on every respect. However
no substitutes or alternatives will be accepted if not mentioned in the base bid.
Owner reserve right to waive any information or reject any or all bids or any part or parts thereof, or to accept that
bid as a whole or part, which in his judgment is for the interest of the owner.
The decision as to acceptance or rejection of any alternate proposed shall be that of owner and / or architect or his
consultant and their decision shall be final.
WORKING TOP/COUNTER TOP
Where work top and counter top is specified shall be constructed of 16/14 GA S.S., profile as per standard shop
drg.
CEILING HUNG SHLEF.
Where ceiling hung shelf specified shall be constructed of 18 GA S.S., With front turned down 40mm & in 12mm
, Rear and both sides turned up 50mm & hemmed.
LEGS:
All legs to be constructed of not less then 40mm diameter stainless steel tubing cold drawn, annealed and pickled
spaced no more than 1800mm C.C. all legs shall be uniform in finish. All legs, until and unless specified, to be of
304 SS.
LEGS CROSS BRACING:
All legs bracing where required, to be constructed of not less then 25 mm diameter 18GA SS and as specified
above for expect as noted below. All cross bracing to run horizontal between all legs, approximately 250 mm
above floor unless otherwise specified. All joints to be completely welded around entire perimeter forming
complete seal with all welds ground and painted. Where one side of box unit is eliminated to provide space for
cans, carts, plumbing or otherwise single cross brace to extent to given legs, such cross brace to be reinforced by
diagonal section of tubing and set not less then 150mm out at each side, all welded as specified herein before.
UNDER BRACING:
All stainless steel counters, tables boards and dish tables tops to be braced below with inverted type channels made
of 16 GA SS as specified, measuring 25 mm X 100mm X 25mm spaced not more than 750 mm on centers and
installed in similar fashion.
FEET:
All legs shall be provided with stainless steel bullet feet, having an integrally formed shaft, with a minimum
adjustment of approx. 40mm without using of threading or adjusting bolts. Feet shall be completely sealed at
bottom and shall be close fitting between tubular legs support and foot.
CASTORS:
All the castors shall be corrosion resistant, non-marking rubberized with precision ball bearing. All the castors
shall be able to hold 250 Kg each. Shall be swivel/ fixed type or with break or with out break mentioned in the
tender. The make shall be equivalent to TENTE.
UNDERSHELVES:
Where flat under shelving is specified under shelves shall be constructed of 18 GA SS All shelving shall be turned
down on all sides approx. 40mm and in 12mm in channel shape with resulting corners cut out to fit contour of leg.
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 5 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
Shelving shall be welded to legs and shall be ground polished & smooth under shelving shall m be reinforced with
25 mm X 100 mm X 25 mm of 16GA SS welded channels.
Removable type shelving to be of same material, rolled down on all sides with corners notched to counter of leg
with resultant notches ground and polished smooth. Under shelving to be constructed in sections of not more than
900 mm and where butted against adjoining shelf section shelving to be turned down 40 mm and in 12 mm in
channel shape. Supporting channel to be furnished on underside of each self-section of same size and material as
specified above.
DRAWERS:
Drawers inserts shall be constructed of 18 GA SS and shall have all corners curved to 20 mm radius.
Drawers front are to be not less then16 GA double pan type with resulting corners welded ground and polished
smooth. All drawers to be sounddeadened. Drawers to set into an enclosed 20 GA SS vermin proof housing closed
on all sides and bottom with 12 GA SS channel shaped slides four ball bearing rollers two front & two rear auto
stops and release catches. Drawer’s faces to be provided with recessed stainless steel pull handle welded face to
face.
All drawers unless otherwise specified shall be 500 mm X 500mm X125mm deep, inside measurements.
SINKS AND DRAIN BOARDS:
All sinks and drain boards to be constructed of 16 GA SS unless otherwise specified with all joints neatly welded
ground and polished smooth. No soldering at any point will be accepted in sink and drain board construction. All
front and free standing edges to be turned up 40mm and to be turned out 50mm and down 40mm in 12mm raised
fronts and ends of drain board are to be level with sink and continuous therewith and is not to follow pitch of drain
boards. Drain boards to be pitched 3mm X 25 mm towards sink compartment. Sinks and drain boards to have
250mm high splash back level and continuous not following pitch of drain boards adjacent to walls or adjoining
equipment. Where drain boards exceed 600 mm in length legs shall be provided as here in before specified. All
vertical and horizontal corners to be rounded to radius of approx. 25 mm with all intersections meeting in spherical
section. All sinks having two or more compartments to have double dividing partitions, with fully rounded corners,
both vertical & horizontal. All corners of drain boards to be rounded on insides to a radius of 25 mm front corners
of rolled rim to be fully rounded on outside rolls and be concentric with inside of roll. Bottom of each sink
compartment to be creased to sufficient pitch towards waste outlet with 100 mm 14 GA SS perforated removable
strainer plate set not less then 3/8” below sink bottom. Opening for hot & cold-water faucets to be cut in to splash
back as required. All sinks shall be 14 GA deep unless otherwise specified to a no. 4 satin finish.
Where sinks are to be built as a part of counters, overflow scrap compartments for sinks as indicated on plans, to
be constructed sane as above, welded into place, with resulting weld s ground and polished smooth, eliminating
traces of welding.
Bottom of each sink compartment to be furnished with 50 mm IPS heavy-duty lever drain. Unless otherwise noted,
connected overflow to be furnished with SS perforated plates secured to body of sinks and constructed so that
constant water level is 25 mm below dividing partition.
DISH TABLE:
Dish table to be constructed to be same as previously specified for sink drain boards except as noted below. Where
table enter dish washing machine or pot washing they shall be turned down 25 mm into machine and a flange
provided at both front and splash back, arranged so as to permit a neoprene gasket, approx. 3mm thick, being
bolted between flanges and turned down of table forming a watertight joint across bottom and if up both side to
top edge of dish table. Under side of all dish table shall be provided with sound deadening material either sprayed
or brushed on into smooth coating. Sound deadening to be Carbozite or equal and finished sprayed with aluminum.
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 6 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
STAINLESS STEEL TABLE TOPS:
Where SS tops are called for they shall be of not less then 16 GA SS finished in satin finish with all resulting
edges rounded with no burrs or other excess material left. Where tables are placed against building walls they are
to be turned up in back approx. 150 mm and returned 25 mm 90 at wall with all exposed ends closed.
Vertical and horizontal joints to be coved on 20mm radius terminating in fully coved intersections thoroughly
welded, ground and polished smooth to match top surfaces.
Top shall be constructed of single pieces of S.S and to be reinforced underneath with inverted type channels of not
less then 16 GA G.I or S.S as noted above, space not more than 750 mm C.C. tables 1800 mm and longer to have
40 X 40 X 3mm steel angle frame work reinforced outside edges with cross channels over 750 mm or less.
SLIDING DOORS:
Sliding doors where called for, to be made of18 GA SS exterior and 20 GA S.S. interior unless otherwise
specified. Doors to be equipped with recessed stainless steel pull handles. Door to be made removable. Door to be
double pan construction, filled with suitable sound deadener, 12 mm thick with all corners welded ground and
polished smooth to uniform finish. Doors to be designed to permit removal for cleaning and adjustment without
use of tools. Bolts and screws are to be kept to minimum and to be of corrosion resisting metal. Spacers where not
exposed to view may be of 14 GA, 20 mm diameter upper suspension nylon rollers to be heavy duty and ground to
minimize wear and noise. Precaution to be taken in all cases to avoid friction and rubbing between doors, door
suspension and upper sliding framework including hardware.
NOTE:
Double doors to be provided with double overhead tracks and carriers for maximum clear door opening. Units to
be provided with trackless bottom with concealed guide for overhead roller doors. Guides to be equipped with
limit stops and to prevent telescoping of doors.
HINGED DOORS:
Hinged doors for cabinets, counter etc. to be constructed of 18 GA SS with ground and polished smooth. Hinges
catches and locking devices to be chrome plated brass. Hinges to be of construction as to eliminate exposed bolts
and screw heads. Doors handles to be provided and to be SS as here in after specified.
COUNTER, CABINET AND OVERHEAD SHELVES:
Counter shelves and cabinet shelves to be constructed of 18 GA SS. Overhead cabinets shelve to be constructed of
18 GA SS. All shelving is to be removable type, finished in satin finish and constructed in sections of not more
than 750 mm. where shelves are more than 1500mm above floor, underside of shelf to be finished same as top. All
shelves to be removable for easy cleaning. Plate warmer shelves to be perforated and removable.
UNTENSIL RACK:
Units to be measured approx. 600mm wide X length as shown on plan, constructed of 50mm X 6mm SS bond
with ends fully rounded, one piece welded construction, ground and polished smooth to uniform finish. Center
rails to be located approx. 250 mm below outer rails and secured b means of welded V shape braces constructed of
same material. Pothooks to be sliding type, positioned 150 mm CC for both upper and lower rails.
Units to be hung from ceiling slab by means of 50 mm X 6mm SS band hangers with cross bracing to prevent
swaying. Supports to be secured to racks by means of SS round heads, bolts and acorn nuts with lock washers. Top
of ceiling hangers when not exposed to be secured to a 12 S.S. channel, which shall be anchored to ceiling slab in
an approved manner. If supporting channels are exposed they are to be constructed of 12 GA SS secured to finish
ceiling in approved manner.
Revolving utensil racks to be a here in after specified and in accordance with details shown on drawings.
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 7 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
WALL CABINETS:
To be of length as shown on plans or which are specified, 325mm deep and 750mm high except where shown
otherwise on drawing. All cabinets to have sloped dust proof tops. Exterior bottom to be a flush type construction.
Cabinets to be constructed of 18 GA SS of all welded construction. Cabinet interiors to be provided with fixed
bottom shelf and two removable, adjustable, intermediate shelves. Shelves to rest on clips, which shall be secured
to keyhole strips fastened to interior of cabinet. Doors to be of double wall construction fully sound proof,
constructed in accordance with details here in before set forth.
SINKS SET INTO WORK COUNTERS OR WORK TOPS:
Sinks to be constructed if same gauge and material as specified for counter top.
Tops perimeter of each sink to be continuously electrically welded to the edge of opening in table or counter top
with resulting welds ground and polished smooth so that sink and top are integral units. Table or counter tops to be
punched to receive 20 mm faucets.
All sinks to have vertical and horizontal corners rounded on 25 mm radius with bottom punched to 40mm or
50mm waste outlet depending on which is indicated in drawings.
Sinks to be finished and appearance to be same as table or counter tops.
BAIN MARIES (ELECTRIC)
To be of some construction as here in before specified as above except that the bottom of the units will not be
provided with the steam coils. Bottom of units for electric operation will be furnished with emersion heating
elements of size as shown on drawings. Complete with control knob, thermostatic sleeve and dial setting for
temperature desired. Immersion heating element to be as manufactured by Escorts Ltd. Or approved equal. False
bottom to be constructed to clear immersion heating element.
Cold pans are to be 150 mm deep and to be of size and shape as shown on the drawings with each cold pan section
constructed as integral part of the counter.
Cold pans to be constructed of 16 GA SS with all vertical horizontal corners coved with serpentine cooling coils
sweated to exteriors. Unit to be insulated on all four sides and bottom with 50 mm of cork set in glycol emulsion.
Exterior lining to be of 18 GA S.S. iron with resulting joints fully welded. Top of counter to be flanged down 12
mm and out 12mm into cold pan and counter top. Bottom of pan to be pitched to 25mm chrome plated brass waste
outlet.
COUNTER/TABLES SPLASH
All Counter/Tables & Refrigerator Splash same material of top with turned up
150mm(Specified) returned 25mm & down 12mm & Rear Gap of splash closed with no.
20 G.A S.S Sheet.
COUNTER/TABLES TOP
Single top Counter/Tables required, wherever specified. KEC to check the feasibility in
terms of entry of the equipment into the site. If KEC feels that getting required
equipment at site in one piece, they need to inform the consultant and divide accordingly
with provision of welding at site.
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 8 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
GENERAL CONDITION
The bidder shall study the specifications before preparing their bids and shall clearly indicate any changes or
deviations from those given in the documents in their jobs. Deviations should be shown in a tabular form clearly
indicating item wise deviation alongside original specifications so these may be considered during evaluation of
the bid.
The bidders are required to quote on the following basis:
•
•
•
•
•
•
Ex- factory / work basis.
Packing & forwarding.
Loading/ unloading at ports and at Project Site.
Transportation from works to site.
All applicable taxes and duties.
Installation cost with details.
01. Kitchen Equipment contractor (K.E.C.) shall ask the owner in writing within one week of receiving tender
documents-for any clarifications and shall promptly bring to the owner’s attention any discrepancy,
duplication or omission that may come to his notice
02.
A. K.E.C. shall furnish total price installed, with break-up of prices giving F.O.B. (U.S.$)
rates and onwards, including cost of sea-worthy packing/containerization, sea-freight,
insurance, import duty, octroi (if applicable), customs clearance charges, work contract tax,
C.S.T., service charge and any other costs etc.
B. K.E.C. should confirm that all equipment quoted would carry manufacturer’s warranty of
12 months from the date of complete handing over.
C. It shall be the responsibility of the K.E.C. for complete work including supply, assembly,
and installation, commissioning, testing & handing over to clients.
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 9 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
SPECIAL CONDTIONS FOR KITCHEN EQUIPMENT
KITCHEN EQUIPMENT CONTRACTOR (K.E.C.).
•
Shall ask the owner in writing with in two weeks of receiving tender documents for any clarifications and
shall promptly bring to the owner’s attention any discrepancy, duplication or omission that may come to
his notice.
•
K.E.C. shall furnish separate prices- ex- factory for each & every piece of equipment and indicate the cost
of local freight separately or shall indicate F.O.B prices for each item.
•
K.E.C. shall indicate separately the cost of sea worthy packing / containerization and the estimated cost of
inland transportation, Sea freight and import duties as applicable.
•
K.E.C. shall indicate separately for each item or a lump sum cost, for installation, testing &
commissioning. Connection of all utilities will be done by other agencies as per the utilities plan to be
submitted by K.E.C. with in 3 weeks of placing orders.
•
K.E.C. should confirm that all equipment quoted will carry manufacturers’ warranty of 12 months from
the date of commissioning & handing over.
•
K.E.C. should base the quotation keeping in view the following terms of payment and should indicate any
other terms of payment at the same time indicating the percentage impact on the basic prices quoted as
per the stipulated terms of payment.
•
The K.E.C. shall study all the drawings and specifications and shall clearly indicate any change or
deviation in his bid from those given in the drawings and specifications, so that they can be taken into
consideration at the time of making comparison of prices.
•
For any deviations in the Make & Model Nos., the K.E.C. shall indicate the compatibility of the
production capacity, thermal rating of insulation, consumption of utilities i.e. electricity water, steam etc.
and the power rating of the motor, pumps, heaters, burners etc.
•
K.E.C. shall submit two (2) sets of catalogue cut in original of all equipment quoted. The item no. and
quantities shall be clearly indicated on top right side of the catalogue. Accessories and optional
equipment included in the prices shall be clearly indicated in red.
•
K.E.C. shall submit a list of factory recommended spare parts for one (1) year satisfactory operation
along with prices with the quotation.
•
K.E.C. shall be required to submit two copies of catalogue cuts & installation drawings of all equipment
in order to obtain owner’s approval prior to shipment of goods.
•
K.E.C. is required to fill up the time frame schedule as indicated below:
DESCRIPTION
1.
2.
3.
4.
5.
6.
7.
APPROVAL OF CATALOGUES & BY CLIENT
MANUFACTURE AND DELIVERY TO PART OF SHIPMENT
TRANSPORTATION
CUSTOM CLEARANCE
INSTALLATION OF EQUIPMENT INCLUDING HOOK-UP
TESTING & COMMISSIONING
HANDING OVER
KIT. EQPT. SPECS
INDIA
UAE
TIME IN WEEKS
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 10 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
Successful K.E.C. will be required to submit fabrication drawings with detail to scale not less than 1:25
for any custom built equipment ordered for owner’s review and approval prior to manufacture. Drawings
should show details of construction and materials to be used and indicate the requirements of plinths
depressions, drains etc. required to be provided by others.
•
K.E.C. will be required to submit samples of materials and components in order to satisfy the owner in
advance of the standards and quality of work man ship, i.e. handles, section of panels, interlocking
arrangements of panels, hinges and other such hardware shall be submitted for approval along with the
drawings.
•
K.E.C. is required to verify all dimensions from site of all equipment ordered with him and of other
equipment that may have impact on his equipment being procured from elsewhere.
•
All items shall suit space conditions all dimensions given are approximately only and in all cases, where
equipment is intended to occupy fixed locations and spaces, the physical condition of the building are to
control and absolute sizes.
•
K.E.C. shall furnish all necessary information and measurement of the job site. This information shall be
secure by others at the site of installation.
•
K.E.C. shall be required to liaise with project manager regarding accessibility of his equipment and to the
site of location and make necessary arrangement for their access.
•
The K.E.C. shall provide all necessary holes and / or opening in the equivalent, which may be required
for the proper installation of the plumbing, electrical, ventilating and refrigeration connections.
•
K.E.C. shall submit a program of manufacturing, delivery and installation and the likely date for
inspection within (2) weeks of placing orders.
•
K.E.C. will be required to show the equipment to the owner’s representative during fabrication i.e. prior
to assembly and before dispatch.
•
K.E.C. or his agents shall be responsible for the installation of his equipment and to get the utility
connections under their supervision by the worker’s deputed by the project manger and to ensure the
satisfactory operation / functioning of all their equipment.
•
Final inspection of all equipment shall be carried out at the site by the owner’s representative after
installation has been completed and the equipment has been hooked up to systems and draw backs /
deficiencies if any, during that time shall be attended to by the K.E.C.
•
All equipments and parts will be covered by a warranty for a period of one year from the date the
equipment is commissioned, K.E.C. shall be required to promptly to attend to all requests for repairs and
replacement of equipment supplied by him during the warranty period.
•
•
•
The K.E.C. shall hand over after satisfactory testing and commissioning four copies of the following:
Detailed equipment data in the Performa approved by consultant / owner.
Drawing indicating the equipment layout and utilities as installed.
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 11 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
FORMAT FOR RECOMMENDED SPARE PART DETAILS
The K.E.C. should submit with his tender quotation an itemized list of recommended high mortality or consumable
spare parts in below format:Part No.
Name of Recommended Part
Recommended
Quantity
Unit Cost
Total Amount
NOTE:- The cost of above mentioned spare part should not be included in tender quotation.
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 12 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
AFTER SALES SERVICE
The K.E.C. should fill in & sign an undertaking for after sales service as follows:The K.E.C. will hereby undertake to provide free & efficient bread-down & repair services including replacement
of all defective parts free of cost for a period of one year after the date of commissioning & handing over of
equipment to the client’s representative or project manager at site.
Name------------------------------------------
Sign------------------------------
Designation------------------------------
Seal / Stamp---------------------
Remarks, if any---------------------------------------------------------------------------------
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 13 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
GENERAL PROCEDURES FOR SUPPLY AND INSTALLATION
Testing of Equipment:
After completing the entire installation, the K.E.C. will jointly arrange for a demonstration and operate the
equipment in accordance with the requirements of the Owner’s Representative and / or Project Manager.
Suitable tests shall be performed to check that all instruments and gauges etc are functioning properly.
Demonstration and tests should be conducted over a prolonged period of time to ensure that all equipment
operate to maximum outputs and in the case of heated or refrigerated equipment, specified temperatures
are duly and satisfactorily attained, with a view to confirm reliable operation.
Cleaning of Equipment & Premises:
Upon completion of the installation, commissioning and demonstration the K.E.C. shall remove all
unwanted materials including his own tools and tackles, as well as all protective coverings and materials
from the equipment.
All equipment shall be cleaned thoroughly and shall be handed over free of stains, blemishes and marks,
ready for brand-new operation. In case any surface is permanently damaged, the K.E.C. shall arrange to
replace the same and make good as directed by the Project Manager.
Training and Handing Over:
The K.E.C. shall be responsible to provide suitable and adequate training to the Owner’s Representatives
and nominated operators as well as maintenance engineers. Such training will include operating and
handling procedures, cleaning and holding procedures as well as preventive maintenance and repairs.
Training and handing over may not be required or completed immediately after installation and
commissioning of the equipment and the K.E.C. should allow for this function to be carried out at a later
date not exceeding 60 days from the date of installation and commissioning of the equipment.
The number of persons attending the equipment training courses and the training dates will be advised at
least 72 hours in advance. The K.E.C. will ensure that the demonstrations and training are imparted by a
representative who is thoroughly conversant with the operations of the equipment in accordance with the
manufacturer’s standard instructions and procedures.
Operating and Installation Manuals:
Four sets of manufacturers’ operating and installation manuals will be handed over to the Project Manager
at the time of demonstration and training.
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 14 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
Protection of Equipment:
All equipment shall be well protected at all times from damage caused at site either by the K.E.C. staff or
those of other contractors.
Record of Drawings:
The K.E.C. shall submit 4 sets of “as-built” drawings on 1:50 scale in addition to an Auto-Cad 2004
version on CD showing the final layouts and dimensions of the equipment as well as separate drawings for
electrical, plumbing, drainage and LPG connections provided on site by him.
In addition, the K.E.C. shall also submit 4 sets of Schedules of Equipment in addition to a spreadsheet
version in Excel format on CD.
Manufacturers’ Warranties:
The K.E.C. shall extend and confirm warranty for defective parts, labour and workmanship in favour of
the Owner extended for a period of 12 months from the date of installation and commissioning.
Warranties offered for extended periods covering 24 or 36 months will be considered in favour of the
K.E.C.
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 15 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
KEC shall submit the following documents along with Quotation
o Soft and hard copy of the catalogues of the equipments quoted.
o Soft copy of the technical Data sheet.
o Any Deviation in specification from the tender needs to be brought to our notice at
the time of submission of quotation.
Quotation will not be considered if any of the above is not submitted along with
quotations
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 16 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
GROUND FLOOR PLAN
RECEIVING AREA
R-01
1
HAND WASH SINK UNIT
R-02
1
FLUSHING HOSE REEL
R-03
1
DRAIN TROUGH GRATING
R-04
5
AIR CURTAIN
UNIT RATE
Local Market
bought out
equipment- ByClient/Operator
R-05
1
DRAIN CHANNEL
R-06
R-07
R-08
6
2
5
R-09
2
MOBILE BUSSING CART
MOBILE VEG CRATE RACK
MOBILE PLATFORM
TROLLEY
INSECT-O-CUTOR
R-10
R-11
1
1
WEIGHING TABLE
BENCH WEIGHING SCALE
R-12
1
PLATFORM WEIGHING
SCALE
Local Market
bought out
equipment- ByClient/Operator
R-13
2
AIR CURTAIN
Local Market
bought out
equipment- ByClient/Operator
R-13A
1
AIR CURTAIN
Local Market
bought out
equipment- ByClient/Operator
VEG WASH
R-19
1
R-20
2
KIT. EQPT. SPECS
INDIA
UAE
AMOUNT
By-Plumbing
Contractor
Local Market
bought out
equipment- ByClient/Operator
Local Market
bought out
equipment- ByClient/Operator
VEG WASH DOUBLE SINK
UNIT
WALL SHELVES
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 17 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
R-21
1
R-22
R-23
1
1
DESCRIPTION
GARBAGE CAN
G-05
1
DRAIN CHANNEL
G-06
G-07
G-08
1
1
1
FLUSHING HOSE REEL
DRAIN TROUGH GRATING
INSECT-O-CUTOR
G-09
G-10
G-11
G-12
1
1
8
12
CAN WASHER
TRASH COMPACTOR
MOBILE CAN DRYING RACK
GARBAGE SKIP FOR FOOD
WASTE
G-14
G-16
1
1
MOBILE CAN DRYING RACK
AIR CURTAIN
INDIA
UAE
AMOUNT
Local Market
bought out
equipment- ByClient/Operator
DRAIN TROUGH GRATING
VEGETABLE WASHER (TILT
TYPE)
R-24
1
DRAIN TROUGH GRATING
R-25
1
MOBILE VEG CRATE RACK
R-26
1
PRE- RINSE SPRAY UNIT
WITH FAUCET
R-27
1
FLUSHING HOSE REEL
R-28
1
DRAIN TROUGH GRATING
R-29
7
THREE TIER - SERVICE
TROLLEY
GARBAGE HANDLING AREA
G-01
1
HAND WASH SINK UNIT
G-02
1
GARBAGE SORTING TABLE
G-03
1
PRE- RINSE SPRAY UNIT
WITH FAUCET
G-04
1
AIR CURTAIN
KIT. EQPT. SPECS
UNIT RATE
Local Market
bought out
equipment- ByClient/Operator
By-Plumbing
Contractor
Local Market
bought out
equipment- ByClient/Operator
Local Market
bought out
equipment- ByClient/Operator
Local Market
bought out
equipment- ByClient/Operator
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 18 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
G-17
1
BQ-02A
1
BQ-03
BQ-04
1
1
BQ-06
BQ-07
1
1
BQ-08
BQ-11
BQ-17
1
3
1
MICROWAVE OVEN
MOBILE PICK-UP TABLE
WORK TABLE WITH SINK &
UNDER SPACE FOR UNDER
COUNTER REFRIGERATOR
BQ-18
1
BQ-21
BQ-22
BQ-23
2
1
1
BQ-25
BQ-26
1
3
BQ-27
BQ-28
BQ-29
BQ-30
1
1
1
5
BQ-31
BQ-32
BQ-33
3
1
1
CEILING HUNG 2 TIER
SHELVES
MOBILE INGREDIENTS BIN
SALAMANDER
UNDER COUNTER
REFRIGERATOR
SERVICE CONSOLE
SINGLE BURNER STOCK
POT RANGE
SPREADER TABLE
CHINESE WOK RANGE
DRAIN TROUGH GRATING
S.S CLADDED MOBILE
TANDOOR
SPREADER TABLE
SPREADER TABLE
GRIDDLE PLATE
UNIT RATE
AMOUNT
THREE TIER - SERVICE
TROLLEY
G-18
6
CHARCOAL TROLLEY
G-22
1
SLOT CHANNEL / DRAIN
RAIL
G-23
5
GARBAGE SKIP
BANQUET KITCHEN
BQ-01
3
HAND WASH SINK UNIT
BQ-02
1
PICK-UP COUNTER W/
UNDER SPACE FORUNDER
COUNTER REFRIGERATOR
& NON-HEATED DISH
STORAGE CABINET
KIT. EQPT. SPECS
INDIA
UAE
UNDER COUNTER
REFRIGERATORW/DRAWER
INFRA RED FOOD WARMER
CEILING HUNG 2 TIER
FOOD PICK UP SHELVES
INFRA RED FOOD WARMER
PICKUP COUNTER W/SINK,
HEATED & NON HEATED
DISH STORAGE CABINET
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 19 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
BQ-34
1
EXHAUST HOOD WITH UV
GREASE REMOVAL
COMPLETE WITH DEMAND
CONTROL VENTILATION &
FIRE SUPRESSION SYSTEM
BQ-36
1
BQ-37
3
CEILING HUNG 2 TIER
SHELVES
GARBAGE CAN
BQ-38
1
BQ-39
1
BQ-40
1
BQ-43
1
WORK TABLE WITH SINK &
UNDER SPACE FOR UNDER
COUNTER REFRIGERATOR
BQ-45
BQ-46
BQ-47
BQ-48
BQ-49
BQ-51
BQ-51A
BQ-52
BQ-54
1
1
1
1
1
1
1
1
1
BQ-55
BQ-56
2
1
SERVICE CONSOLE
SPREADER TABLE
SPREADER TABLE
FOUR BURNER RANGE
SPREADER TABLE
DEEP FAT FRYER
SPREADER TABLE
GRIDDLE PLATE
SIX BURNER RANGE WITH
OVEN
SPREADER TABLE
EXHAUST HOOD WITH UV
GREASE REMOVAL
COMPLETE WITH DEMAND
CONTROL VENTILATION &
FIRE SUPRESSION SYSTEM
BQ-57
5
INSECT-O-CUTOR
BQ-60
1
WORK TABLE WITH SINK &
UNDER SPACE FOR UNDER
COUNTER REFRIGERATOR
KIT. EQPT. SPECS
INDIA
UAE
UNIT RATE
AMOUNT
Local Market
bought out
equipment- ByClient/Operator
UNDER COUNTER
REFRIGERATOR
UNDER COUNTER
REFRIGERATOR
WORK TABLE WITH SINK &
UNDER SPACE FOR UNDER
COUNTER REFRIGERATOR
Local Market
bought out
equipment- ByClient/Operator
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 20 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
BQ-61
BQ-62
2
1
BQ-64
8
BQ-66
BQ-67
6
1
POT WASH
BQ-68
1
BQ-69
1
BQ-69A
1
BQ-70
1
BQ-71
1
BQ-72
1
BQ-73
1
BQ-74
7
DISH WASH
BQ-75
1
DESCRIPTION
HAND WASH SINK UNIT
POT WASH SINK UNIT
GARBAGE CAN
L-SHAPED SOILED DISH
DROP OFF TABLE WITH
SINK, TABLE MOUNTED
RACK SHELF & CHUTE
GARBAGE CAN
BQ-77
1
BQ-78
1
PRE- RINSE SPRAY UNIT
WITH FAUCET
CONVEYOR TYPE DISH
WASHING MACHINE WITH
DRYER AND CLEAN DISH
ROLLER
BQ-79
BQ-80
BQ-82
1
1
1
INDIA
UAE
Local Market
bought out
equipment- ByClient/Operator
WALL MOUNTED PIPE
SHELF
DRAIN TROUGH GRATING
FLUSHING HOSE UNIT
DRAIN TROUGH GRATING
MOBILE POT RACK
1
KIT. EQPT. SPECS
AMOUNT
WALL SHELVES
UNDER COUNTER
REFRIGERATOR
STORE ROOM SHELVINGDAY STORE
FREFEZER SHELVING
SLOT CHANNEL / DRAIN
RAIL
BQ-76
BQ-83
10
BQ-84
1
BQ-85
1
BULK COOKING
UNIT RATE
Local Market
bought out
equipment- ByClient/Operator
VAPOUR HOOD
DRAIN TROUGH GRATING
WALL MOUNTED RACK
SHELF
MOBILE CLEAN DISH RACK
FLUSHING HOSE UNIT
DRAIN TROUGH GRATING
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 21 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
BQ-91
1
BQ-92
BQ-92A
1
MODULAR BLAST CHILLER
(REMOTE COMPRESSOR)
ROLL IN COMBI OVEN
WATER FILTER FOR COMBI
OVEN
COMBI OVEN W/STAND
WATER FILTER FOR COMBI
OVEN
S.S SERVICE CONSOLE
MOBILE WORK TABLE
EXHAUST HOOD WITH UV
GREASE REMOVAL
COMPLETE WITH DEMAND
CONTROL VENTILATION &
FIRE SUPRESSION SYSTEM
BQ-94
BQ-94A
1
2
BQ-96
BQ-97
BQ-98
2
1
3
1
BQ-99
BQ-100
BQ-101
BQ-102
BQ-103
2
2
2
2
1
TILTING BRAT PAN
DRAIN TROUGH GRATING
GAS FIRED TILTING KETTLE
DRAIN TROUGH GRATING
EXHAUST HOOD WITH UV
GREASE REMOVAL
COMPLETE WITH DEMAND
CONTROL VENTILATION &
FIRE SUPRESSION SYSTEM
BQ-110
1
BQ-111
BQ-112
BQ-116
1
9
8
BQ-117
3
SLOT CHANNEL / DRAIN
RAIL
MOBILE G.N PAN TROLLEY
REFER SHELVING
MOBILE HOT FOOD
HOLDING CART
MOBILE COLD FOOD
HOLDING CART
DISH WASH
BQ-121
1
BQ-122
1
BQ-123
1
BQ-124
1
BQ-125
1
KIT. EQPT. SPECS
INDIA
UAE
UNIT RATE
AMOUNT
HAND WASH SINK UNIT
FLUSHING HOSE UNIT
DRAIN TROUGH GRATING
L-SHAPED SOILED DISH
DROP OFF TABLE WITH
SINK TABLE MOUNTED
RACK SHELF & CHUTE
MOBILE CUTLERY SINK
UNIT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 22 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
BQ-126
1
GARBAGE CAN
BQ-127
1
BQ-128
BQ-129
1
1
PRE- RINSE SPRAY UNIT
WITH FAUCET
DRAIN TROUGH GRATING
CONVEYOR TYPE DISH
WASHING MACHINE WITH
DRYER, 90 deg. OFF
LOADER AND CLEAN DISH
ROLLER
BQ-130
BQ-133
1
1
1
2
2
BQ-146
1
COLD FOOD
KIT. EQPT. SPECS
INDIA
UAE
AMOUNT
Local Market
bought out
equipment- ByClient/Operator
VAPOUR HOOD
WALL MOUNTED RACK
SHELF
BQ-134
6
MOBILE CLEAN DISH RACK
BEVERAGE STATION
BQ-139
1
BEVERAGE TABLE W/SINK
& TROUGH
BQ-140
1
COFFEE MACHINE WITH
GRINDER
BQ1
CLARIS HEAD &
140A
CARTRIDGE M FOR
COFFEE MACHINE WITH
GRINDER
BQ-141
1
MILK WARMER
BQ1
WATER FILTER FOR MILK
141A
WARMER
BQ-142
1
WATER BOILER
BQ1
WATER FILTER FOR WATER
142A
BOILER
BQ-143
1
DRAIN TROUGH GRATING
BQ-144
1
WATER COOLER
BQ144A
BQ-145
BQ145A
UNIT RATE
Local Market
bought out
equipment- ByClient/Operator
WATER FILTER FOR WATER
COOLER
ICE CUBE MACHINE W/BIN
WATER FILTER FOR ICE
CUBE MACHINE WITH
i20002 REPLACEMENT
CARTRIDGE
DRAIN TROUGH GRATING
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 23 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
BQ-151
BQ-152
BQ-153
BQ-154
BQ-156
1
2
1
1
1
BQ-157
BQ-158
1
1
BQ-159
1
BQ-160
BQ-163
BQ-164
BQ-166
BQ-167
BQ-168
1
1
1
1
2
1
BQ-173
1
BQ-174
BQ-176
BQ-177
9
1
1
BQ177A
BQ-178
BQ178A
1
1
1
BQ-179
1
BQ-180
1
SERVICE BAR
BQ-183
1
BQ-184
1
BQ-185
2
KIT. EQPT. SPECS
INDIA
UAE
DESCRIPTION
WORK TABLE
WALL SHELVES
SANDWICH GRILLER
WORK TABLE
MULTIPURPOSE JUICER (3
IN 1)
SLICER
WORK TOP WITH UNDER
COUNTER REFRIGERATOR
WALL MOUNTED STORAGE
CABINET
SALADETTE UNIT
SLOT TOASTOR
ICE CREAM CABINET
WORK TABLE WITH SINK
WALL SHELVES
GARBAGE CAN
SLOT CHANNEL / DRAIN
RAIL
REFER SHELVING
WORK TABLE WITH SINK
WATER COOLER
UNIT RATE
AMOUNT
Local Market
bought out
equipment- ByClient/Operator
Local Market
bought out
equipment- ByClient/Operator
WATER FILTER FOR WATER
COOLER
ICE CUBE MACHINE W/BIN
WATER FILTER FOR ICE
CUBE MACHINE WITH
i20002 REPLACEMENT
CARTRIDGE
DRAIN TROUGH GRATING
MOBILE ICE BIN
HAND WASH SINK UNIT
WORK TABLE
WALL SHELVES
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 24 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
BQ-186
1
GARBAGE CAN
BQ-187
BQ-190
BQ-191
1
1
1
VERTICAL BOTTLE COOLER
BLENDER
WORK TABLE WITH SINK &
COCKTAIL STATION &
GLASS RACK SLIDE
BQ-193
1
SLOT CHANNEL / DRAIN
RAIL
RS-12
1
UPRIGHT REFRIGERATOR
RS-14
14
RS-15
RS-16
18
3
MOBILE ROOM SERVICE
TROLLEY
HOT CASES
RACK FOR HOT CASES
INDIA
UAE
AMOUNT
Local Market
bought out
equipment- ByClient/Operator
BQ-194
7
REFER SHELVING
WET SERVICE STATION
BQ-198
1
WORK TABLE
BQ-199
1
WORK TABLE WITH SINK
ROOM SERVICE
RS-01
1
ROOM SERVICE INCHARGE
FURNITURE
RS-02
1
WORK TABLE
RS-03
1
BEVERAGE TABLE W/SINK
& TROUGH
RS-04
1
WALL SHELF
RS-05
1
MILK WARMER
RS-05A
1
WATER FILTER FOR MILK
WARMER
RS-06
1
WATER BOILER
RS-06A
1
WATER FILTER FOR WATER
BOILER
RS-09
1
COFFEE MACHINE WITH
GRINDER
RS-09A
1
CLARIS HEAD &
CARTRIDGE M FOR
COFFEE MACHINE WITH
GRINDER
RS-10
1
MICROWAVE OVEN
RS-11
1
UPRIGHT FREEZER
KIT. EQPT. SPECS
UNIT RATE
By-Wood work
Contractor
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 25 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
RS-17
3
MOBILE ROOM SERVICE
TRAY SET UP RACK
TROLLEY
RS-18
6
RS-19
1
STORE ROOM SHELVINGROOM SERVICE
UPRIGHT BOTTLE COOLER
UNIT RATE
AMOUNT
RS-20
1
TRAY SET-UP TABLE
RS-21
2
WALL SHELVES
RS-22
1
TRAY SET-UP TABLE
GROUND FLOOR PLAN
TANDOOR STATION
AD-01
1
DROP IN HAND WASH SINK
AD-02
1
AD-03
AD-04
1
2
AD-06
2
AD-07
1
AD-07A
1
DROP IN FOUR ZONE
INDUCTION RANGE
CABINET WITH STORAGE
AD-08
AD-09
1
1
BUILT-IN G.N PAN
CABINET WITH STORAGE
By-Operator
AD-10
2
STONE TOP COUNTER
By-Interior
Contractor
AD-11
AD-12
3
3
AD-14
2
AD-15
4
AD-16
AD-16A
AD-17
1
1
2
DROP IN HOT PLATE
LIGHT BRIDGE WITH STRIP
HEATER
DROP IN HEATED STONE
TOP
RETRACTABLE HEATED
LAMP
DROP IN GRIDDLE PLATE
CABINET WITH STORAGE
EXHAUST HOOD WITH UV
GREASE REMOVAL
COMPLETE WITH DEMAND
CONTROL VENTILATION &
FIRE SUPRESSION SYSTEM
KIT. EQPT. SPECS
INDIA
UAE
CABINET WITH DROP IN
SINK
CABINET WITH WASTE BIN
DROP IN DRIP PAN WITH
SKWER HANGER
UNDER COUNTER
REFRIGERATOR
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 26 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
AD-18
2
DESCRIPTION
DROP IN REFRIGERATED
ICE WELL
AD-22
1
GRIDDLE PLATE
AD-23
1
SPREADER TABLE
AD-24
1
FOUR BURNER RANGE
AD-25
2
TANDOOR
AD-27
1
EXHAUST HOOD WITH UV
GREASE REMOVAL
COMPLETE WITH DEMAND
CONTROL VENTILATION &
FIRE SUPRESSION SYSTEM
DESSERT STATION & LIVE STATION
AD-32
1
DROP IN ICE CREAM
CABINET
AD-33
1
STONE TOP COUNTER
AD-34
DROP IN DEEPERWELL
WITH FAUCET
INCOGNEETO INDUCTION
PLATE
CHEFFING DISHES
WAFFLE BAKING MACHINE
CREP MAKING MACHINE
DROP IN GRANITE FROST
TOP WITH SNEEZE GUARD
AD-35
1
2
AD-35A
AD-36
AD-37
AD-38
2
1
1
1
AD-39
1
CABINET WITH STORAGE
AD-40
1
AD-41
AD-42
1
1
DROP IN REFRIGERATED
ICE WELL WITH SNEEZE
GUARD
CABINET WITH STORAGE
UNDER COUNTER
REFRIGATOR
AD-43
AD-44
1
1
AD-45
AD-46
1
1
CABINET WITH WASTE BIN
CABINET WITH DROP IN
SINK
DROP IN HAND WASH SINK
STONE TOP COUNTER
UNIT RATE
AMOUNT
By-Interior
Contractor
By-Operator
By-Interior
Contractor
AD-47
1
SANDWICH GRILLER
COLD STATION
AD-49
1
CABINET WITH WASTE BIN
AD-50
1
UPRIGHT OPEN DISPLAY
SHOWCASE
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 27 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
AD-51
1
AD-52
AD-53
1
1
AD-54
1
AD-55
AD-57
1
1
AD-58
AD-59
1
1
AD-60
1
AD-61
2
DESCRIPTION
CABINET WITH DROP IN
SINK
DROP IN HAND WASH SINK
UNDER COUNTER
REFRIGERATOR
STONE TOP COUNTER
STONE TOP COUNTER
AD-67
1
COMBI OVEN
AD-67A
1
WATER FILTER FOR COMBI
OVEN
AD-68
1
AD-69
AD-70
1
1
UNDER COUNTER
REFRIGERATOR
SALADETTE UNIT
PIZZA OVEN
AD-71
AD-72
5
1
AD-73
2
AD-73A
1
AD-74
1
CABINET WITH WASTE BIN
CABINET WITH DROP IN
SINK
UNDER COUNTER
REFRIGERATOR
UNDER COUNTER
REFRIGERATOR
STONE TOP COUNTER
AD-74A
AD-75
1
5
CABINET WITH STORAGE
DROP IN HOT PLATE
INDIA
UAE
AMOUNT
By-Interior
Contractor
CABINET WITH STORAGE
UNDER COUNTER
REFRIGERATOR
SUSHI DISPLAY CABINET
UNDER COUNTER
REFRIGERATOR
DROP IN REFRIGERATED
COLD PAN
AD-62
1
GRAVITY SLICER
ADD SHOW KITCHEN
PIZZA & LIVE COOKING
AD-66
1
CABINET WITH DROP IN
SINK
AD-66A
1
DROP IN HAND WASH SINK
AD-66B
1
DECORATIVE WALL SHELF
KIT. EQPT. SPECS
UNIT RATE
By-Interior
Contractor
By-Interior
Contractor
By-Interior
Contractor
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 28 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
AD-75A
AD-76
QTY
DESCRIPTION
15
5
CHEFFING DISHES
LIGHT BRIDGE WITH STRIP
HEATER
CARVING STATION WITH
SNEEZE GUARD
AD-77
AD-78
1
1
AD-79
1
CABINET WITH DROP IN
SINK
STONE TOP COUNTER
AD-80
1
DECORATIVE SHELF
AD-81
1
AD-82
1
UNDER COUNTER
FREEZER
DROP IN TWO ZONE
INDUCTION RANGE
AD-83
1
EXHAUST HOOD WITH UV
GREASE REMOVAL
COMPLETE WITH DEMAND
CONTROL VENTILATION &
FIRE SUPRESSION SYSTEM
AD-84
3
AD-85
1
DROP IN REFRIGERATED
ICE WELL
DROP IN CHAR GRILL
AD-86
1
CABINET WITH STORAGE
AD-87
1
AD-89
AD-90
AD-91
AD-92
2
1
1
1
AD-93
1
AD-94
1
DROP IN BAMBOO
STEAMER FOR WARMING
MOBILE INGREDIENTS BIN
DIMSUM STEAMER
NOODLE BOILER
EXHAUST HOOD WITH UV
GREASE REMOVAL
COMPLETE WITH DEMAND
CONTROL VENTILATION &
FIRE SUPRESSION SYSTEM
DROP IN REFRIGERATED
ICE WELL
NOODLE HANGING RACK
AD-95
2
RETRACTABLE HEATED
LAMP
AD-96
1
SINGLE TOP COOKING
BATTERY
KIT. EQPT. SPECS
INDIA
UAE
UNIT RATE
AMOUNT
By-Operator
By-Interior
Contractor
By-Interior
Contractor
By-Interior
Contractor
By-Interior
Contractor
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 29 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
AD-96A
AD-96B
1
1
GRIDDLE PLATE
FOUR BURNER RANGE
AD-96C
AD-96D
AD-96E
AD-96F
AD-96G
AD-96H
1
1
1
1
1
1
SALAMANDER
GRID SHELF
FRY TOP
DEEP FAT FRYER
SOLID TOP RANGE
FOUR BURNER RANGE
AD-97
1
EXHAUST HOOD WITH UV
GREASE REMOVAL
COMPLETE WITH DEMAND
CONTROL VENTILATION &
FIRE SUPRESSION SYSTEM
AD-98
2
AD-98A
AD-99
AD-99A
AD-100
2
1
2
2
INCOGNEETO INDUCTION
PLATE
CHEFFING DISHES
CABINET WITH STORAGE
CABINET WITH STORAGE
PLATE STORAGE
AD-101
AD-103
1
1
1
AD113A
1
AD-114
1
AD-116
1
AD-117
1
KIT. EQPT. SPECS
INDIA
UAE
AMOUNT
By-Operator
By-Interior
Contractor
CHINESE WOK RANGE
EXHAUST HOOD WITH UV
GREASE REMOVAL
COMPLETE WITH DEMAND
CONTROL VENTILATION &
FIRE SUPRESSION SYSTEM
AD-104
1
CABINET WITH STORAGE
BREAD/JUICE COUNTER/COFFEE STATION
AD-112
1
STONE TOP COUNTER
AD-113
UNIT RATE
By-Interior
Contractor
COFFEE MACHINE WITH
GRINDER
CLARIS HEAD &
CARTRIDGE M FOR
COFFEE MACHINE WITH
GRINDER
DROP IN REFRIGERATED
ICE WELL WITH WOODEN
COVER
CABINET WITH DROP IN
SINK
STONE TOP COUNTER
By-Interior
Contractor
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 30 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
AD-118
AD-119
AD-120
1
1
1
AD-121
1
AD-122
1
AD-123
AD-124
1
1
AD-125
1
AD-126
1
UNDER COUNTER
REFRIGERATOR
VISUAL BARRIER BY ID.
AD-127
AD-128
1
1
CABINET WITH STORAGE
CABINET WITH STORAGE
F&B BAR
FB-01
FB-02
FB-03
FB-03A
1
1
1
1
FB-04
FB-06
1
1
FB-07
FB-09
FB-10
1
1
1
CABINET WITH STORAGE
CABINET WITH WASTE BIN
GLASS WASHER
WATER FILTER FOR GLASS
WASHER
GLASS RACK CABINET
COCKTAIL/BLENDER
STATION W/DOUBLE SPEED
RAIL
BLENDER
GLASS FROSTER
BEER CHILLER WITH KEG
/DISPENCER AND
ACEESSORIES
FB-10A
1
FB-11
FB-12
FB-14
FB-15
FB-16
2
4
2
2
2
KIT. EQPT. SPECS
INDIA
UAE
UNIT RATE
AMOUNT
CABINET WITH WASTE BIN
ORANGE JUICE MACHINE
MULTIPURPOSE JUICER (3
IN 1)
DROP IN REFRIGERATED
ICE WELL WITH WOODEN
COVER
UNDER COUNTER
REFRIGERATOR
HIGH SPEED OVEN
RECESSED PREP AREA
By-Interior
Contractor
By-Interior
Contractor
By-Operator
CABINET WITH
STORAGE FOR BEER
CHILLER UNIT
BOTTLE COOLER – 3 DOOR
BOTTLE COOLER – 2 DOOR
CABINET WITH STORAGE
WINE CHILLER – RED WINE
WINE CHILLER – WHITE
WINE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 31 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
FB-21
1
FB-21A
FB-22
FB-23
FB-24
1
1
2
1
SEMI AUTOMATIC COFFEE
MACHINE
CLARIS HEAD &
CARTRIDGE M FOR
COFFEE MACHINE WITH
GRINDER
COFFEE GRINDER
POS STATION
COUNTER WITH STORAGE
FB-26
FB-27
1
1
GLASS RACK CABINET
VERTICAL REFRIGERATOR
FB-28
1
BLENDER
FB-29
1
FB-30
FB-32
1
1
COCKTAIL/BLENDER
STATION W/DOUBLE SPEED
RAIL
CABINET WITH WASTE BIN
UNDER COUNTER
REFRIGATOR
BAKERY
BK-01
1
STONE TOP COUNTER
BK-02
1
BK-02A
2
BK-03
1
BK-03A
BK-03B
BK-04
1
1
1
DROP IN HEATED STONE
TOP
RECTRACTABLE HEAT
LAMP
SEMI AUTOMATIC COFFEE
MACHINE
CLARIS HEAD &
CARTRIDGE M FOR
COFFEE MACHINE WITH
GRINDER
COFFEE GRINDER
TEA SAMOVAR
BK-05
1
BK-06
BK-07
1
1
BK-08
1
KIT. EQPT. SPECS
INDIA
UAE
DESCRIPTION
UNIT RATE
AMOUNT
By-Operator
By-Interior
Contractor
REFRIGERATED SAVORY
SHOW CASE
CABINET WITH STORAGE
CABINET WITH DROP IN
SINK
EXHAUST HOOD WITH UV
GREASE REMOVAL
COMPLETE WITH DEMAND
CONTROL VENTILATION &
FIRE SUPRESSION SYSTEM
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 32 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
BK-09
1
DEEP FAT FRYER
BK-09A
BK-09B
BK-09C
BK-10
2
1
1
1
BK-11
BK-12
BK-14
1
1
1
SPREADER TABLE
TWO BURNER RANGE
GRIDDLE PLATE
REFRIGERATED SWEET
SHOW CASE
CABINET WITH WASTE BIN
CABINET WITH WASTE BIN
TWO DECK BAKING
OVEN/CONVECTION OVEN,
PROOFING CABINET &
INTEGRATED HOOD
SCALE INHIBITOR FEEDER
FOR BAKING OVEN
BK-14A
BK-15
1
1
BK-16
1
BK-17
1
BK-18
1
BK-19
1
DISH WASH
BK-28
1
BK-29
2
BK-30
1
BK-31
BK-32
BK-33
BK-34
1
1
1
1
BK-35
1
BK-36
BK-37
BK-38
BK-39
BK-40
5
1
1
1
1
KIT. EQPT. SPECS
INDIA
UAE
DESCRIPTION
UNIT RATE
AMOUNT
CABINET WITH DROP IN
SINK
DROP IN GRANITE FROST
TOP WITH SNEEZE GUARD
UNDER COUNTER
REFRIGERATOR
CABINET WITH STORAGE
CABINET WITH STORAGE
SOILED DISH DROP OFF
TABLE W/SINK , & CHUTE
GARBAGE CAN
PRE- RINSE SPRAY UNIT
WITH FAUCET
DISH WASH MACHINE
VAPOUR HOOD
DRAIN TROUGH GRATING
CLEAN DISH LANDING
TABLE
WALL MOUNTED RACK
SHELF
MOBILE CLEAN DISH RACK
FLUSHING HOSE UNIT
DRAIN TROUGH GRATING
HAND WASH SINK UNIT
INSECT-O-CUTOR
Local Market
bought out
equipment- ByClient/Operator
Local Market
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 33 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
UNIT RATE
AMOUNT
bought out
equipment- ByClient/Operator
BK-41
1
WORK TOP WITH UNDER
COUNTER REFRIGERATOR
BK-42
2
WALL SHELF
BK-43
1
WORK TABLE WITH SINK
BK-44
2
WALL SHELVES
BK-45
1
MOBILE BAKING TRAY
TROLLEY
FIRST FLOOR PLAN
KITCHEN
SK-01
1
PICK-UP COUNTER W/
UNDER SPACE FORUNDER
COUNTER REFRIGERATOR
& HEATED DISH STORAGE
CABINET
SK-02
2
SK-03
1
SK-04
1
SK-05
1
SK-08
1
SK-09
SK-13
SK-19
SK-20
SK-21
SK-21A
SK-22
SK-23
SK-24
SK-25
1
1
1
1
4
1
1
1
1
1
SK-26
SK-26A
1
1
KIT. EQPT. SPECS
INDIA
UAE
INFRA RED FOOD
WANRMER
UNDER COUNTER
REFRIGERATOR
GARBAGE CAN
Local Market
bought out
equipment- ByClient/Operator
CEILING HUNG 2 TIER
FOOD PICK UP SHELVES
PICK UP COUNTER WITH
SINK & NON HEATED DISH
STORAGE CABINET
MICROWAVE OVEN
SALAMANDER
SPREADER TABLE
FOUR BURNER RANGE
SPREADER TABLE
SPREADER TABLE
PASTA COOKER
DEEP FAT FRYER
GRIDDLE PLATE
SIX BURNER RANGE WITH
OVEN
COMBI OVEN WITH STAND
WATER FILTER FOR COMBI
OVEN
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 34 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
SK-27
1
EXHAUST HOOD WITH UV
GREASE REMOVAL
COMPLETE WITH DEMAND
CONTROL VENTILATION &
FIRE SUPRESSION SYSTEM
SK-35
1
SLOT CHANNEL / DRAIN
RAIL
SK-36
SK-38
SK-41
6
6
1
REFER SHELVING
FREEZER SHELVING
PICK UP COUNTER W/NON
HEATED DISH STORAGE
CABINET
SK-42
1
SK-44
SK-45
1
1
CEILING HUNG 2 TIER
FOOD PICK UP SHELVES
SALAMANDER
PICK-UP COUNTER REFER
W/HEATED DISH STORAGE
CABINET& UNDER SPACE
FORUNDER COUNTER
REFRIGERATOR
SK-46
2
SK-47
1
SK-48
2
SK-51
SK-52
SK-53
1
2
2
SK-54
1
SK-55
SK-55A
SK-56
SK-57
SK-58
1
2
1
2
1
UNDER COUNTER
REFRIGERATOR
WORK TABLE WITH SINK
WALL SHELVES
CHINESE STEAMER
SPREADER TABLE
CHINESE WOK RANGE
SK-59
1
FOUR BURNER RANGE
SK-60
SK-61
1
1
GRIDDLE PLATE
DEEP FAT FRYER
KIT. EQPT. SPECS
INDIA
UAE
INFRA RED FOOD
WANRMER
CEILING HUNG 2 TIER
FOOD PICK UP SHELVES
UNDER COUNTER
REFRIGERATOR
WORK TABLE WITH SINK
WALL SHELVES
GARBAGE CAN
UNIT RATE
AMOUNT
Local Market
bought out
equipment- ByClient/Operator
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 35 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
SK-62
SK-62A
1
1
COMBI OVEN WITH STAND
WATER FILTER FOR COMBI
OVEN
SK-63
SK-64
2
1
SK-65
SK-66
SK-73
SK-74
SK-75
SK-76
1
1
2
4
14
14
SPREADER TABLE
EXHAUST HOOD WITH UV
GREASE REMOVAL
COMPLETE WITH DEMAND
CONTROL VENTILATION
AND FIRE SUPRESSION
SYSTEM
DRAIN TROUGH GRATING
SERVICE CONSOLE
MOBILE GN PAN TROLLEY
STORAGE SHELVING
DRAIN TROUGH GRATING
INSECT-O-CUTOR
ICE MACHINE
SK-80
1
SK-81
1
SK-81A
1
SK-82
1
SK-82A
1
MOBILE ICE BIN
WATER COOLER
UNIT RATE
AMOUNT
Local Market
bought out
equipment- ByClient/Operator
Local Market
bought out
equipment- ByClient/Operator
WATER FILTER FOR WATER
COOLER
ICE CUBE MACHINE W/BIN
WATER FILTER FOR ICE
CUBE MACHINE WITH
i20002 REPLACEMENT
CARTRIDGE
SK-83
1
DRAIN TROUGH GRATING
WET SERVICE STATION
SK-84
1
WORK TABLE WITH SINK
SK-85
2
WALL SHELVES
SK-88
1
WORK TABLE
SK-89
2
WALL SHELVES
DAY STORE
SK-96
11
STORE ROOM SHELVINGDAY STORE
SK-97
6
STORE ROOM SHELVING
SK-98
24
STORE ROOM SHELVINGSTEWARDING STORE
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 36 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DISH WASH
SK-101
1
DESCRIPTION
1
2
SOAKING TROLLY
GARBAGE CAN
SK-104
1
SK-105
1
PRE- RINSE SPRAY UNIT
WITH FAUCET
CONVEYOR TYPE DISH
WASHING MACHINE WITH
DRYER
SK-106
SK-107
SK-109
1
1
1
SK-116
SK-117
SK-118
SK-119
SK-120
1
1
6
2
2
SK-130
SK-133
2
1
AMOUNT
U-SHAPED SOILED DISH
DROP OFF TABLE W/SINK ,
RACK SHELF & CHUTE
SK-102
SK-103
SK-110
1
SK-111
1
SK-112
1
POT WASH
SK-115
1
UNIT RATE
Local Market
bought out
equipment- ByClient/Operator
VAPOUR HOOD
DRAIN TROUGH GRATING
WALL MOUNTED RACK
SHELF
FLUSHING HOSE UNIT
DRAIN TROUGH GRATING
POCKER CHIP DOLLEY
POT WASH SINK UNIT
WALL MOUNTED POT RACK
DRAIN TROUGH GRATING
MOBILE CLEAN DISH RACK
MOBILE POT RACK
PRE- RINSE SPRAY UNIT
WITH FAUCET
WET SERVICE STATION
SK-123
1
WORK TABLE WITH SINK
SK-124
2
WALL SHELVES
SK-125
1
WORK TABLE
SK-126
2
WALL SHELVES
SK-127
1
HAND WASH SINK UNIT
COLD FOOD
SK-129
1
WORK TABLE WITH SINK &
UNDER SPACE FOR UNDER
COUNTER REFRIGERATOR
KIT. EQPT. SPECS
INDIA
UAE
WALL SHELVES
UNDER COUNTER
REFRIGERATOR
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 37 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
SK-135
1
SK-136
1
SK-137
1
MULTIPURPOSE JUICER (3
IN 1)
UPRIGHT TWO DOOR
REFER
WORK TABLE WITH SINK &
UNDER SPACE FOR UNDER
COUNTER REFRIGERATOR
SK-138
SK-139
2
2
WALL SHELVES
GARBAGE CAN
SK-142
1
SLOT TOASTER
SK-143
1
SK-144
SK-145
1
1
UNDER COUNTER
REFRIGERATOR
SALADETTE UNIT
SANDWICH GRILLER
UNIT RATE
AMOUNT
Local Market
bought out
equipment- ByClient/Operator
STAFF KITCHEN
SC-01
1
PICK UP COUNTER W/SINK
& UNDER SPACE
FORUNDER COUNTER
REFRIGERATOR
SC-02
1
SC-03
2
SC-04
1
SC-05
SC-06
1
2
SC-07
SC-08
SC-09
SC-13
SC-14
SC-15
SC-16
1
1
1
1
1
1
1
CEILING HUNG 2 TIER
SHELVES
SPREADER TABLE
S.S CLADDED MOBILE
TANDOOR
SPREADER TABLE
SPREADER TABLE
GRIDDLE PLATE
DEEP FAT FRYER
SPREADER TABLE
FOUR BURNER RANGE
TWO BURNER RANGE
SC-17
SC-18
1
1
GAS FIRED TILTING KETTLE
DRAIN TROUGH GRATING
KIT. EQPT. SPECS
INDIA
UAE
UNDER COUNTER
REFRIGERATOR
GARBAGE CAN
Local Market
bought out
equipment- ByClient/Operator
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 38 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
SC-19
1
EXHAUST HOOD WITH UV
GREASE REMOVAL
COMPLETE WITH DEMAND
CONTROL VENTILATION &
FIRE SUPRESSION SYSTEM
SC-20
1
SC-21
SC-22
SC-23
1
1
4
SC-31
1
UPRIGHT FOUR DOOR
REFER
SERVICE CONSOLE
WORK TABLE W/SINK
STORE ROOM SHELVINGDAY STORE
SLOT CHANNEL / DRAIN
RAIL
SC-32
6
POT WASH
SC-36
1
SC-37
SC-38
SC-39
SC-40
AMOUNT
REFER SHELVING
POT WASH SINK UNIT
WALL MOUNTED POT RACK
DRAIN TROUGH GRATING
MOBILE POT RACKS
PRE- RINSE SPRAY UNIT
WITH FAUCET
STAFF CAFETERIA
SC-43
4
CUTLERY & PLATE HOLDER
SC-44
1
STONE TOP COUNTER
W/STORAGE BY ID
SC-45
1
CONVEYOR TOASTER
SC-46
1
JUICE DISPENSER
SC-48
2
TEA & COOFFEE
DISPENSER
SC-50
2
TRAY REST RAIL
SC-50A
1
COUNTER
2
1
2
2
SC-51
2
DROP IN REFRIGERATED
COLD BAIN-MARIE
W/SNEEZE GUARD
SC-52
2
SC-53
4
DROP IN HOT BAIN-MARIE
W/SNEEZE GUARD
HAND WASH SINK
SC-54
1
COUNTER
SC-56
2
TEA / COFFEE DISPENSER
KIT. EQPT. SPECS
INDIA
UAE
UNIT RATE
By-Interior
Contractor
By-Interior
Contractor
By-Interior
Contractor
By-Interior
Contractor
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 39 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
SC-60
1
WATER COOLER
SC-60A
1
SC-61
SC-62
SC-63
1
1
5
WATER FILTER FOR WATER
COOLER
MOBILE GLASS RACK
DRAIN TROUGH GRATING
HAND WASH SINK
DISH WASH
SC-68
1
SC-69
1
DESCRIPTION
UNIT RATE
AMOUNT
Local Market
bought out
equipment- ByClient/Operator
By-Interior
Contractor
HAND WASH SINK UNIT
U-SHAPED SOILED DISH
DROP OFF TABLE WITH
SINK, TABLE MOUNTED
RACK SHELF& CHUTE
SC-70
SC-71
2
2
SOAKING TROLLY
GARBAGE CAN
SC-72
1
SC-73
1
PRE- RINSE SPRAY UNIT
WITH FAUCET
RACK TYPE DISH WASHING
MACHINE WITH DRYER
AND CLEAN DISH ROLLER
SC-74
SC-75
SC-76
1
1
1
Local Market
bought out
equipment- ByClient/Operator
VAPOUR HOOD
DRAIN TROUGH GRATING
CLEAN DISH LANDING
TABLE
SC-77
1
WALL MOUNTED RACK
SHELF
SC-82
1
POCKER CHIP DOLLEY
SC-83
9
MOBILE CLEAN DISH RACK
SC-84
1
FLUSHING HOSE UNIT
SC-85
1
DRAIN TROUGH GRATING
SC-86
4
THREE TIER - SERVICE
TROLLEY
BANQUET PANTRY
BP-01
1
PICK UP TABLE WITH SINK
& UNDER SPACE
FORUNDER COUNTER
REFRIGERATOR
BP-01A
1
CEILING HUNG 2 TIER
FOOD PICK UP SHELVES
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 40 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
BP-02
1
BP-03
2
BP-04
2
BP-05
BP-06
2
1
BP-07
BP-08
BP-09
BP-10
1
1
2
1
GRIDDLE PLATE
DEEP FAT FRYER
SPREADER TABLE
EXHAUST HOOD WITH UV
GREASE REMOVAL
COMPLETE WITH DEMAND
CONTROL VENTILATION &
FIRE SUPRESSION SYSTEM
BP-15
BP-16
2
1
HAND WASH SINK UNIT
POT WASH SINK UNIT
BP-16A
2
PRE- RINSE SPRAY UNIT
WITH FAUCET
UNDER COUNTER
REFRIGERATOR
GARBAGE CAN
UNIT RATE
AMOUNT
Local Market
bought out
equipment- ByClient/Operator
S.S CLADDED MOBILE
TANDOOR
SPREADER TABLE
TWO BURNER RANGE
POT WASH
BP-17
1
WALL MOUNTED POT RACK
BP-18
1
DRAIN TROUGH GRATING
BP-19
4
MOBILE POT RACKS
BP-20
1
FLUSHING HOSE UNIT
BP-21
1
DRAIN TROUGH GRATING
BEVERAGE STATION
BP-26
5
MOBILE WORK TABLE
BP-27
2
MOBILE HOT FOOD
HOLDING CART
BP-28
2
MOBILE COLD FOOD
HOLDING CART
BP-29
1
UPRIGHT TWO DOOR
FREEZER
BP-30
1
UPRIGHT BOTTLE COOLER
BP-36
1
MILK WARMER
BP-36A
1
WATER FILTER FOR MILK
WARMER
BP-37
1
WATER BOILER
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 41 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
BP-37A
1
BP-38
1
WATER FILTER FOR WATER
BOILER
GARBAGE CAN
BP-39
1
BP-40
BP-41
1
1
BP-41A
1
BP-42
BP-43
1
1
BP-43A
1
BP-44
1
BP-44A
1
BEVERAGE TABLE W/SINK
& TROUGH
WALL SHELF
COFFEE MACHINE WITH
GRINDER
CLARIS HEAD &
CARTRIDGE M FOR
COFFEE MACHINE WITH
GRINDER
MOBILE ICE BIN
WATER COOLER
SM-03
1
SM-03A
1
SM-04
1
GLASS WASHER
WATER FILTER FOR GLASS
WASHER
GLASS RACK CABINET
SM-05
1
CABINET WITH STORAGE
SM-05A
1
POS STATION
1
CABINET WITH WASTE BIN
KIT. EQPT. SPECS
INDIA
UAE
AMOUNT
Local Market
bought out
equipment- ByClient/Operator
Local Market
bought out
equipment- ByClient/Operator
WATER FILTER FOR WATER
COOLER
ICE CUBE MACHINE W/BIN
WATER FILTER FOR ICE
CUBE MACHINE WITH
i20002 REPLACEMENT
CARTRIDGE
BP-45
1
DRAIN TROUGH GRATING
BP-46
9
STORE ROOM SHELVINGBANQUET STORE
BP-47
5
STORE ROOM SHELVINGVIDEO EQUIPMENT STORE
SMOKI MOTO BAR
SM-01
1
DRAFT BEER SYSTEM WITH
ACCESSORIES
SM-02
1
CABINET FOR BEER
CHILLER/KEGS
SM-06
UNIT RATE
By-Beer Vendor
By-Operator
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 42 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
SM-07
SM-08
1
1
SM-30
1
REFRIGERATED UPRIGHT
CABINET FOR KIMCHI
CELERY
SM-31
1
REFRIGERATED UPRIGHT
CABINET FOR VEGETABLES
SM-31A
1
SM-32
1
STONE TOP STORAGE
CABINET
BUILT IN SINK
SM-32A
1
SM-33
2
SM-35
1
SM-36
1
SM-37
1
SM-38
SM-39
1
1
TG-01A
1LOT
UNIT RATE
AMOUNT
BLENDER
COCKTAIL STATION WITH
SPEED RAIL
SM-11
1
GLASS RACK CABINET
SM-12
1
CABINET WITH STORAGE
SM-14
3
BOTTLE COOLER- 3 DOOR
SM-15
1
WINE CHILLER – RED WINE
SM-16
1
WINE CHILLER – WHITE
WINE
SMOKI MOTO DISPLAY KITCHEN
SM-29
1
SOJU LIQUOR DISPLAY
STONE TOP STORAGE
CABINET
REFRIGERATED UPRIGHT
DISPLAY CABINET
STONE TOP STORAGE
CABINET
CABINET WITH WASTE BIN
By-Interior
Contractor
By-Interior
Contractor
By-Interior
Contractor
By-Interior
Contractor
By-Interior
Contractor
EXHAUST HOOD WITH FIRE
SUPRESSION SYSTEM
GRAVITY SLICER
CHAR COAL PREPARATION
DISPLAY
SM-40
22
DROP IN BAR –BE QUE
GRILL WITH VENTILATION
CANOPY ABOVE DINING
TABLE
TUCNASY GRILL RESTAURANT
TG-01
1
PIZZA OVEN
KIT. EQPT. SPECS
INDIA
UAE
STONE TOP COUNTER
By-Interior
Contractor
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 43 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
TG-02
1
UNDER COUNTER
REFRIGATOR
TG-02A
1
SALADETTE UNIT
TG-03
3
TG-04
1
TG-05
1
UNDER COUNTER
REFRIGERATOR
DROP IN REFRIGERATED
ICE WELL
DROP IN HAND WASH SINK
TG-06
2
CABINET WITH WASTE BIN
TG-07
1
CABINET WITH STORAGE
TG-07A
1
CABINET WITH STORAGE
TG-08
1
CABINET WITH STORAGE
TG-09
1
CABINET WITH STORAGE
TG-10
3
TG-11
1
TG-11A
TG-11B
1
1
TG-11C
1
RETRACTABLE HEATED
LAMP
SINGLE TOP COOKING
BATTERY
GRIDDLE PLATE
TWIN TANK DEEP FAT
FRYER
LAVA STONE GRILL
TG-11D
TG-11E
1
1
TG-11F
1
TG-11G
1
TG-12
1
EXHAUST HOOD WITH UV
GREASE REMOVAL
COMPLETE WITH DEMAND
CONTROL VENTILATION &
FIRE SUPRESSION SYSTEM
TG-13
TG-14
1
1
CABINET WITH WASTE BIN
UNDER COUNTERE
REFGERIGERATOR
KIT. EQPT. SPECS
INDIA
UAE
DESCRIPTION
UNIT RATE
AMOUNT
SINK UNIT
UNDER COUNTER
REFRIGERATOR
FOUR BURNER RANGE
WITH OVEN
OVERHEAD SHELF
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 44 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
TG-15
TG-16
1
3
TG-16A
1
TG-17
2
TG-18
TG-18A
TG-19
1
1LOT
1
TG-19A
1
TG-19B
1
TG-20
3
TG-21
TG-22
1
1
TG-22A
1
TG-23
1
TG-26
TG-27
TG-28
TG-29
TG-29A
1
1
1
1
TG-30
TG-31
TG-31A
1
1
1
1
TG-32
2
TG-33
1
KIT. EQPT. SPECS
INDIA
UAE
DESCRIPTION
UNIT RATE
AMOUNT
CABINET WITH STORAGE
RETRACTABLE HEATED
LAMP
DROP IN HEATED STONE
TOP
VERTICAL REFRIGERATOR
CABINET WITH STORAGE
STONE TOP COUNTER
COFFEE MACHINE WITH
GRINDER
CLARIS HEAD &
CARTRIDGE M FOR
COFFEE MACHINE WITH
GRINDER
CLARIS HEAD &
CARTRIDGE M FOR
COFFEE MACHINE WITH
GRINDER
STORE ROOM SHELVINGBAR STORE
CABINET WITH STORAGE
DRAFT BEER SYSTEM WITH
ACCESSORIES
CABINET FOR BEER
CHILLER/KEGS
By-Interior
Contractor
By-Beer Vendor
COCKTAIL STATION WITH
SPEED RAIL
BLENDER
CABINET WITH WASTE BIN
GLASS RACK CABINET
GLASS WASHER
WATER FILTER FOR GLASS
WASHER
CABINET WITH STORAGE
WINE CHILLER – RED WINE
WINE CHILLER – WHITE
WINE
BOTTLE COOLER- 3 DOOR
AMBIENT DISPLAY SHOW
CASE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 45 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
TG-34
1
TG-35
1
TG-35A
1
CK-02
1
CK-03
1
CK-04
1
CK-05
1
CK-07
2
GARBAGE CAN
CK-08
1
CK-09
CK-10
CK-13
CK-14
2
1
1
1
CK-15
CK-16
CK-17
1
1
1
CK-18
1
UNDER COUNTER
REFRIGERATOR
WALL SHELVES
MICROWAVE OVEN
TABLE TOP DOUGH MIXER
ATTACHEMENT HOLDING
RACK
BREAD SLICER
DOUGH SHEETER
ATTACHEMENT HOLDING
RACK
INSECT-O-CUTOR
CK-19
1
SPIRAL DOUGH KNEADER
CK-19A
CK-19B
1
1
WATER CHILLER
WATER MIX MEASURE
DEVICE
STORAGE CABINET LOW
HEIGHT
ICE CUBE MACHINE
UNIT RATE
AMOUNT
By-Interior
Contractor
WATER FILTER FOR ICE
CUBER
UPPER BASEMENT FLOOR
BAKERY & CONFECTIONARY
CK-01
1
WORK TABLE WITH UNDER
SPACE FORUNDER
COUNTER REFRIGERATOR
KIT. EQPT. SPECS
INDIA
UAE
CEILING HUNG 2 TIER
SHELVES
UNDER COUNTER
REFRIGERATOR
WALL MOUNTED LOCKABLE
STORAGE CABINET
WORK TABLE WITH SINK &
UNDER SPACE FOR UNDER
COUNTER REFRIGERATOR
Local Market
bought out
equipment- ByClient/Operator
Local Market
bought out
equipment- ByClient/Operator
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 46 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
CK-19C
1
CK-20
1
CK-21
CK-22
1
1
CK-23
1
CK-24
2
CK-25
1
CK-26
CK-27
4
2
WATER FILTER FOR WATER
CHILLER
ATTACHEMENT HOLDING
RACK
PLANTRY DOUGH MIXER
ATTACHEMENT HOLDING
RACK
DOUGH DIVIDER CUM
ROUNDER
UNDER COUNTER
REFRIGERATOR
CEILING HUNG 2 TIER
SHELVES
MOBILE INGREDIENTS BIN
GRANITE TOP TABLE
W/UNDER SPACE FOR
UNDER COUNTER
REFRIGERATOR
CK-32
1
BENCH WEIGHING SCALE
CK-33
1
CK-34
1
CK-38
15
GRANITE TOP TABLE
W/SINK
CEILING HUNG 2 TIER
SHELVES
INSECT-O-CUTOR
CK-39
CK-41
18
1
DRAIN TROUGH GRATING
SLOT CHANNEL / DRAIN
RAIL
CK-42
1
CK-43
10
CK-45
9
OVEN ROOM
CK-50
1
MOBILE G.N PAN TROLLY
REFER SHELVING
FREEZER SHELVING
CK-51
CK-52
2
1
CK-53
1
KIT. EQPT. SPECS
INDIA
UAE
UNIT RATE
AMOUNT
Local Market
bought out
equipment- ByClient/Operator
Local Market
bought out
equipment- ByClient/Operator
BAKER'S TABLE W/SINK
&SPICE BIN SHELF
MOBILE INGREDIENTS BIN
TWO ZONE INDUCTION
COOKER
MOBILE TRAY COOLING
RACK
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 47 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
CK-54
CK-54A
1
CK-55
1
CK-55A
1
CK-56
CK-57
1
1
CK-57A
1
CK-59
1
ROLL IN ROTARY OVEN
SCALE INHIBITOR FEEDER
FOR BAKING OVEN
3-DECK BAKING OVEN
WITH STEAM INJECTOR
SCALE INHIBITOR FEEDER
FOR BAKING OVEN
WORK TABLE
ROLL IN PROOFING
CABINET
WATER FILTER FOR
PROOFING CABINET
EXHAUST HOOD WITH UV
GREASE REMOVAL
COMPLETE WITH DEMAND
CONTROL VENTILATION &
FIRE SUPRESSION SYSTEM
CK-60
8
CK-69
1
CK-71
1
CK-72
2
CK-73
CK-74
CK-75
CK-76
1
1
2
1
CK-76A
1
UNIT RATE
AMOUNT
MOBILE BAKING TRAY
TROLLEY
CHOCOLATE & ICE CREAM ROOM
CK-65
1
WORK TABLE WITH SINK &
UNDER SPACE FOR UNDER
COUNTER REFRIGERATOR
TRAY WASH
CK-81
1
CK-82
1
KIT. EQPT. SPECS
INDIA
UAE
UNDER COUNTER
REFRIGERATOR
BENCH WEIGHING SCALE
Local Market
bought out
equipment- ByClient/Operator
CHOCOLATE TEMPERING
UNITS
STORAGE SHELVING
GRAINTE TOP WORK TABLE
WALL SHELVES
ICE CREAM MAKING
MACHINE WITH
PASTEURIZER AND BATCH
FREEZER
WATER FILTER FOR ICE
CREAM MAKING MACHINE
WITH PASTEURIZER AND
BATCH FREEZER
PAN WASH SINK UNIT
WALL MOUNTED POT RACK
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 48 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
CK-83
CK-84
1
1
DRAIN TROUGH GRATING
GARBAGE CAN
CK-85
CK-86
CK-87
CK-88
1
1
2
8
FLUSHING HOSE UNIT
DRAIN TROUGH GRATING
MOBILE POT RACK
STORE ROOM SHELVINGBAKER STORE
HYGIENE LAB
CK-89
1
CK-90
2
CK-91
1
CK-92
1
DESCRIPTION
UNIT RATE
AMOUNT
Local Market
bought out
equipment- ByClient/Operator
WORK TABLE
WALL SHELVES
WORK TABLE WITH SINK
CEILING HUNG 2 TIER
SHELVES
DIMSUM PREP.
CK-95
1
WORK TABLE WITH SINK &
UNDER SPACE FOR UNDER
COUNTER REFRIGERATOR
CK-96
1
CEILING HUNG 2 TIER
SHELVES
CK-97
1
UNDER COUNTER
REFRIGERATOR
CK-99
3
STORAGE ROOM SHELVING
ICE CARVING RM
CK-100
1
WORK TABLE WITH SINK
CK-101
1
DRAIN TROUGH GRATING
CK-102
1
WORK TABLE
JANITOR'S ROOM
CK-103
1
MOP SINK CABINET WITH
MOP HOLDER
CK-104
2
STORAGE SHELVINGJANITOR'S ROOM
MEAT PREP.
CK-108
1
WORK TABLE WITH SINK
CK-109
1
WALL SHELF
CK-110
1
CHOPPING BLOCK TABLE
TOP
CK-111
1
VACUUM PACKING
MACHINE
CK-114
1
BUFFALO CHOPPER
CK-115
1
CHOPPING BOARD
CK-116
1
BONE SAW MACHINE
KIT. EQPT. SPECS
INDIA
UAE
By-Operator
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 49 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
CK-118
1
BENCH WEIGHING SCALE
CK-119
3
GARBAGE CAN
CK-120
CK-121
1
1
WORK TABLE
CEILING HUNG 2 TIER
SHELVES
CK-125
1
DOUBLE SINK TABLE
CK-126
2
WALL SHELVES
CK-127
1
DRAIN TROUGH GRATING
CK-129
1
MEAT MINCER
CK-130
1
KNIFE SHARPENER
CK-131
1
KNIFE STERLIZER CABINET
CK-132
2
MOBILE CHOPPING BOARD
SANITIZER TROLLEY
SEA PREP. & SUSHI PREP.
CK-137
1
HAND WASH SINK UNIT
CK-138
1
WORK TABLE
CK-139
2
WALL SHELVES
CK-140
1
CHOPPING BLOCK TABLE
TOP
CK-141
1
FISH FILE REFRIGERATOR
CK-144
1
FISH PREP TABLE WITH
SINK UNIT
CK-145
1
KNIFE SHARPENER
CK-146
1
KNIFE STERLIZER CABINET
CK-149
1
WORK TABLE WITH SINK
CK-150
2
WALL SHELVES
REFER
CK-156
1
SLOT CHANNEL / DRAIN
RAIL
CK-157
UNIT RATE
AMOUNT
Local Market
bought out
equipment- ByClient/Operator
Local Market
bought out
equipment- ByClient/Operator
By-Operator
1
SKEWER HANGING
TROLLEY
CK-158
6
REFER SHELVING
CK-160
10
FREEZER SHELVING
CK-162
7
FREEZER SHELVING
GARDE MANGER & COLD PREP.
CK-164
1
HAND WASH SINK UNIT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 50 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
CK-165
1
L- SHAPE WORK TABLE
WITH SINK AND UNDER
SPACE FOR UNDER
COUNTER REFRIGERATOR
CK-166
1
CK-167
CK-168
CK-169
CK-170
2
1
1
1
UNDER COUNTER
REFRIGERATOR
WALL SHELVES
SLOT TOASTER
SANDWICH GRILLER
WORK TABLE WITH SINK &
UNDER SPACE FOR UNDER
COUNTER REFRIGERATOR
CK-171
CK-172
1
1
CK-174
1
CK174A
CK-175
CK-176
1
WALL SHELF
CEILING HUNG 2 TIER
SHELVES
CENTERIFUGAL JUICER
EXTRACTOR
CITRUS JUICER
1
1
BLENDER
BENCH WEIGHING SCALE
CK-177
1
CK-179
1
CK-180
CK-181
CK-182
1
1
1
CK-183
1
CK-185
3
UNDER COUNTER
REFRIGERATOR
VACUUM PACKAGING
MACHINE
SLICER
WORK TABLE
CEILING HUNG 2 TIER
SHELVES
CHOPING BOARD TABLE
TOP
GARBAGE CAN
REFER
CK-187
1
CK-188
1
CK-189
10
VEG PREP.
KIT. EQPT. SPECS
INDIA
UAE
UNIT RATE
AMOUNT
Local Market
bought out
equipment- ByClient/Operator
By-Operator
Local Market
bought out
equipment- ByClient/Operator
SLOT CHANNEL / DRAIN
RAIL
MOBILE G.N PAN TROLLEY
REFER SHELVING
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 51 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
CK-193
CK-194
CK-195
CK-196
CK-197
CK-198
1
1
2
1
1
1
CK-199
1
CK-200
1
CK-202
CK-203
CK-204
CK-205
CK-206
CK-207
1
1
1
1
1
1
CK-208
CK-211
CK-214
1
1
1
VEG PROCESSOR
VEG CUTTER CUM MIXER
MOBILE CHOPPING BOARD
SANITIZER TROLLEY
REFER
CK-220
1
SLOT CHANNEL / DRAIN
RAIL
UNIT RATE
AMOUNT
HAND WASH SINK UNIT
DOUBLE SINK UNIT
WALL SHELVES
DRAIN TROUGH GRATING
POTATO PEELAR
POTATO ONION STORAGE
BINS
WORK TABLE
CEILING HUNG 2 TIER
SHELVES
SLICER
WORK TABLE WITH SINK
WALL SHELF
KNIFE SHARPENER
KNIFE STERLIZER CABINET
BENCH WEIGHING SCALE
CK-221
1
MOBILE G.N PAN TROLLEY
CK-222
10
REFER SHELVING
MASALA GRINDING
CK-225
1
HAND WASH SINK UNIT
CK-226
1
WORK TABLE WITH SINK
CK-228
4
MASALA GRINDER
(TILTING)
CK-229
CK-230
2
10
DRAIN TROUGH GRATING
STORAGE SHELVING FRUIT RIPENING & ROOT
VEG. STORE
CK-231
1
PULVERIZER
Local Market
bought out
equipment- ByClient/Operator
Local Market
bought out
equipment- ByClient/Operator
Local Market
bought out
equipment- ByClient/Operator
POT WASH
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 52 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
CK-233
CK-234
1
1
HAND WASH SINK UNIT
POT WASH SINK UNIT
CK-236
CK-237
CK-238
CK-239
CK-240
1
1
1
2
1
DRAIN TROUGH GRATING
FLUSHING HOSE UNIT
DRAIN TROUGH GRATING
MOBILE POT RACKS
INSECT-O-CUTOR
CK-241
1
GARBAGE CAN
ICE BAY
CK-244
1
ICE CUBE MACHINE WITH
BIN
WATER FILTER FOR ICE
CUBE MACHINE WITH
i20002 REPLACEMENT
CARTRIDGE
WATER COOLER
CK244A
1
CK-245
1
CK245A
CK-246
CK-247
CK-248
1
WATER FILTER FOR WATER
COOLER
2
DRAIN TROUGH GRATING
4
MOBILE ICE BIN
1
ICE FLAKE MACHINE WITH
BIN
CK1
WATER FILTER FOR ICE
248A
CUBE MACHINE WITH
i20002 REPLACEMENT
CARTRIDGE
DRY FOOD STORE
FS-01
1
STORE INCHARGE
FURNITURE
FS-02
1
WEIGHING TABLE
FS-03
1
BENCH WEIGHING SCALE
FS-04
1
KIT. EQPT. SPECS
INDIA
UAE
PLATFORM WEIGHING
SCALE
UNIT RATE
AMOUNT
Local Market
bought out
equipment- ByClient/Operator
Local Market
bought out
equipment- ByClient/Operator
Local Market
bought out
equipment- ByClient/Operator
By-Wood work
Contractor
Local Market
bought out
equipment- ByClient/Operator
Local Market
bought out
equipment- By-
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 53 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
UNIT RATE
AMOUNT
Client/Operator
FS-05
29
FS-06
14
FS-06A
60
FS-08
1
FS-09
FS-11
10
1
STORE ROOM SHELVING GENERAL FOOD
STORE ROOM SHELVING JUICE & MINRAL WATER
STORE ROOM SHELVING DRY FOOD
SLOT CHANNEL / DRAIN
RAIL
REFER SHELVING
SLOT CHANNEL / DRAIN
RAIL
FS-12
8
FREEZER SHELVING
OIL, MAIDA & FLOUR STORE
FS-16
9
DUNNAGE RACK
UNIFORM & LINEN ROOM
FS-17
1
UNIFORM STORE
INCHARGE FURNITURE
FS-18
20
STORE ROOM SHELVINGUNIFORM
FS-19
88
STORE ROOM SHELVINGLINEN
LIQOUR STORE
FS-20
5
DUNNAGE RACK
FS-21
3
HONEY COMB SHELVING
FS-22
5
STORE ROOM SHELVING –
LIQUOR STORE
BEVERAGE STORE
FS-23
16
STORE ROOM SHELVING –
BEVERAGE STORE
FS-25
1
SLOT CHANNEL / DRAIN
RAIL
FS-26
FS-31
REFER SHELVING
STORE ROOM SHELVINGHK BULK LINEN
GENERAL STORES
FS-32
1
STORE INCHARGE
FURNITURE
FS-33
1
WEIGHING TABLE
FS-34
1
BENCH WEIGHING SCALE
8
19
KIT. EQPT. SPECS
INDIA
UAE
By-Wood work
Contractor
By-Wood work
Contractor
Local Market
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 54 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
FS-35
1
FS-36
90
FS-54
3
DESCRIPTION
PLATFORM WEIGHING
SCALE
UNIT RATE
AMOUNT
bought out
equipment- ByClient/Operator
Local Market
bought out
equipment- ByClient/Operator
STORE ROOM SHELVING GENERAL STORE
FS-40
17
STORE ROOM SHELVINGSTATIONARY
FS-42
66
STORE ROOM SHELVINGOS & E
FS-43
62
STORE ROOM SHELVING CHINA GLASS SILVER
CLEANING EQUIPMENT
FS-46
1
HAND WASH SINK UNIT
FS-47
1
MOP SINK CABINET MOP
HOLDER
FS-49
1
WORK TABLE
FS-50
10
STORAGE SHELVINGCLEANING EQUIPMENT
FS-51
10
STORE ROOM SHELVINGGLASS WASHING
FS-52
10
STORE ROOM SHELVINGCLEANING CHEMICAL
FS-53
33
STORE ROOM SHELVINGBULK STORAGE GUST
SUPPLY
STORE ROOM SHELVING –
LOST & FOUND STORE
FLOWER ARRANGEMENT ROOM
FS-56
1
HAND WASH SINK UNIT
FS-57
1
WORK TABLE
FS-58
FS-59
1
1
WALL SHELF
GARBAGE CAN
FS-62
1
GRANITE TOP TABLE WITH
SINK
FS-64
1
GRANITE TOP TABLE WITH
SINK
KIT. EQPT. SPECS
INDIA
UAE
Local Market
bought out
equipment- ByClient/Operator
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 55 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
FS-65
FS-73
1
1
DESCRIPTION
UNIT RATE
AMOUNT
WALL SHELF
SLOT CHANNEL / DRAIN
RAIL
FS-74
5
REFER SHELVING
TYPICAL FLOOR
MAIDS PANTRY-1
HK-01
8
MOP SINK CABINET MOP
HOLDER
HK-02
8
WORK TABLE WITH SINK &
UNDER SPACE FOR
EQUIPMENTS
HK-03
HK-04
8
8
WALL SHELF
GARBAGE CAN
HK-07
8
DISH CUM GLASS WASHER
HK-07A
8
HK-08
HK-09
8
8
WATER FILTER FOR DISH
CUM GLASS WASHER
DRAIN TROUGH GRATING
ICE CUBE MACHINE
HK-09A
8
HK-10
HK-11
24
24
Local Market
bought out
equipment- ByClient/Operator
WATER FILTER FOR UNDER
COUNTER ICE CUBE
MACHINE
HOUSE KEEPING TROLLEY
LOCKABLE STORAGE
CUPBOARD
HK-12
8
LOCKABLE STORAGE
CUPBOARD
HK-13
32
STORAGE SHELVING
MAIDS ROOM PANTRY-3
MR-01
8
HAND WASH SINK UNIT
MR-02
8
HANGER BAR FOR BATH
ROB
MR-03
8
WORK TABLE WITH SINK
MR-04
8
WALL SHELF
MR-05
8
WATER BOILER
MR-05A
8
MR-07
8
KIT. EQPT. SPECS
INDIA
UAE
WATER FILTER FOR WATER
BOILER
HKP MOBILE CART
By-Operator
By-Operator
By-Operator
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 56 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
MR-08
16
MR-09
8
MR-12
16
MR-13
MR-14
MR-15
8
8
32
DESCRIPTION
LOCKABLE STORAGE
CUPBOARD
MOP SINK CABINET MOP
HOLDER
LOCKABLE STORAGE
CUPBOARD
STORAGE RACK 3 TIER
HKP MOBILE CART
STORE ROOM SHELVING –
HK PANTRY
UNIT RATE
AMOUNT
By-Operator
THIRD FLOOR PLAN
HOT FOOD PREP
PB-01
1
SPREADER TABLE
PB-02
1
DEEP FAT FRYER
PB-03
1
SPREADER TABLE
PB-04
1
FOUR BURNER RANGE
PB-05
1
SPREADER TABLE
PB-06
1
GRIDDLE PLATE
PB-07
1
WORK TABLE
PB-08
1
COMBI OVEN WITH STAND
PB-08A
1
WATER FILTER FOR COMBI
OVEN
PB-09
1
EXHAUST HOOD WITH UV
GREASE REMOVAL
COMPLETE WITH DEMAND
CONTROL VENTILATION &
FIRE SUPRESSION SYSTEM
PB-10
1
PB-11
1
PB-12
1
PB-13
1
PB-14
1
PICKUP COUNTER WITH
SINK & UNDER SPACE FOR
UNDER COUNTER
REFRIGERATOR
INFRA RED FOOD
WANRMER
UNDER COUNTER
REFRIGERATOR
CEILING HUNG 2 TIER
FOOD PICK UP SHELVES
GARBAGE CAN
Local Market
bought out
equipment- ByClient/Operator
REFER
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 57 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
PB-16
1
SLOT CHANNEL / DRAIN
RAIL
PB-17
PB-18
PB-19
5
4
1
REFER SHELVING
STORAGE SHELVING
CABINET FOR CO2
CYLIDER
STORAGE
PB-24
1
PB-25
2
COLD KITCHEN
PB-30
1
PB-31
1
DESCRIPTION
UNIT RATE
AMOUNT
By-Beer Vendor
HAND WASH SINK UNIT
STORAGE SHELVING
SANDWICH GRILLER
MULTIPURPOSE JUICER (3
IN 1)
WORK TOP UNDER
COUNTER REFGER W/G.N
PANS
PB-32
1
PB-33
PB-34
1
1
WALL SHELF
WORK TABLE WITH SINK &
UNDER SPACE FOR UNDER
COUNTER REFRIGERATOR
PB-35
PB-36
2
1
WALL SHELF
SLOT TOASTOR
PB-37
PB-38
1
1
SALAMANDER
UNDER COUNTER
REFRIGERATOR
SERVICE STATION
PB-40
1
BEVERAGE TABLE WITH
TROUGH
PB-41
PB-41A
1
1
WATER BOILER
WATER FILTER FOR WATER
BOILER
PB-42
1
WATER COOLER
PB-42A
1
WATER FILTER FOR WATER
COOLER
PB-43
1
ICE CUBE MACHINE W/BIN
PB-43A
1
WATER FILTER FOR ICE
CUBE MACHINE WITH
i20002 REPLACEMENT
CARTRIDGE
PB-44
1
DRAIN TROUGH GRATING
DISH & POT WASH
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 58 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
PB-50
1
L-SHAPED SOILED DISH
DROP OFF TABLE W/SINK ,
TROUGH, RACK SHELF &
CHUTE
PB-51
1
GARBAGE CAN
PB-52
PB-53
PB-54
1
1
3
PB-55
PB-56
1
1
SOAKING TROLLY
DRAIN TROUGH GRATING
PRE- RINSE SPRAY UNIT
WITH FAUCET
VAPOUR HOOD
DISH WASH MACHINE
PB-57
1
PB-58
1
PB-59
PB-60
PB-61
PB-62
1
1
1
1
CLEAN DISH LANDING
TABLE
WALL MOUNTED RACK
SHELF
MOBILE CLEAN DISH RACK
WALL MOUNTED POT RACK
DRAIN TROUGH GRATING
POT WASH SINK UNIT
PB-63
PB-64
PB-65
PB-66
PB-67
POOL BAR
PB-70
1
1
1
3
1
DRAIN TROUGH GRATING
FLUSHING HOSE UNIT
HAND WASH SINK UNIT
MOBILE POT RACK
MOBILE CLEAN DISH RACK
1
PB-71
1
PB-72
PB-72A
1
CABINET FOR BEER
CHILLER/KEGS
DRAFT BEER SYSTEM WITH
ACCESSORIES
GLASS WASHER
WATER FILTER FOR GLASS
WASHER
GLASS RACK CABINET
POS STATION
PB-73
PB-74
PB-74A
1
1
1
PB-75
PB-76
1
1
1
PB-79
1
KIT. EQPT. SPECS
INDIA
UAE
DESCRIPTION
UNIT RATE
AMOUNT
Local Market
bought out
equipment- ByClient/Operator
By-Beer Vendor
By-Operator
CABINET WITH STORAGE
CABINET WITH WASTE BIN
COCKTAIL STATION WITH
SPEED RAIL
GLASS RACK CABINET
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 59 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
PB-80
PB-81
PB-83
PB-84
PB-85
2
3
1
1
1
DESCRIPTION
CABINET WITH STORAGE
BOTTLE COOLER – 3 DOOR
BLENDER
WINE CHILLER – RED WINE
WINE CHILLER – WHITE
WINE
LOWER BASEMENT PLAN-NIGHT CLUB
VIP BAR
VI-01
1
GLASS RACK CABINET
VI-02
1
CABINET WITH STORAGE
VI-04
1
GLASS WASHER
VI-04A
WATER FILTER FOR GLASS
1
WASHER
VI-05
1
CABINET WITH WASTE BIN
VI-06
1
GLASS RACK CABINET
VI-07
1
COCKTAIL/BLENDER
STATION W/DOUBLE SPEED
RAIL
VI-08
1
DRAFT BEER SYSTEM WITH
ACCESSORIES
VI-09
1
CABINET FOR BEER
CHILLER/KEGS
VI-10
1
COCKTAIL/BLENDER
STATION W/DOUBLE SPEED
RAIL
VI-11
2
BLENDER
VI-12
1STONE TOP COUNTER
LOT
VI-13
1
CABINET WITH WASTE BIN
VI-14
1
CABINET WITH STORAGE
VI-18
2
POS STATION
VI-19
2
BOTTLE COOLER – 3 DOOR
VI-20
VI-21
1
1
VI-22
1
WINE CHILLER – RED WINE
WINE CHILLER – WHITE
WINE
BACK COUNTER
VI-23
2
CABINET WITH STORAGE
NIGHT CLUB BAR
NC-01
1
DRAFT BEER SYSTEM WITH
ACCESSORIES
NC-02
1
CABINET FOR BEER
CHILLER/KEGS
NC-03
1
GLASS RACK SLIDE
KIT. EQPT. SPECS
INDIA
UAE
UNIT RATE
AMOUNT
By-Beer Vendor
By-Interior
Contractor
By-Operator
By-Interior
Contractor
By-Beer Vendor
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 60 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
NC-05
1
DESCRIPTION
COCKTAIL/BLENDER
STATION W/DOUBLE SPEED
RAIL
NC-06
1
BLENDER
NC-07
2
CABINET WITH WASTE BIN
NC-08
1
GLASS FROSTER
NC-09
1
GLASS WASHER
NC-09A
WATER FILTER FOR GLASS
1
WASHER
NC-12
1
CABINET WITH STORAGE
NC-15
2
PASS THRU BOTTLE
COOLER – 6 DOOR
NC-20
2
GLASS RACK CABINET
NC-21
2
COCKTAIL/BLENDER
STATION W/DOUBLE SPEED
RAIL
NC-23
2
BLENDER
NC-25
2
CABINET WITH WASTE BIN
NC-26
1
CABINET WITH STORAGE
NC-27
1
DRAFT BEER SYSTEM WITH
ACCESSORIES
NC-27A
CABINET FOR BEER
CHILLER/KEGS
NC-28
1
GLASS FROSTER
NIGHT CLUB KITCHEN
HOT FOOD PREP
NC-42
1
PICKUP COUNTER WITH
SINK & UNDER SPACE FOR
UNDER COUNTER
REFRIGERATOR
NC-42A
1
NC-43
NC-44
1
1
NC-46
NC-47
NC-47A
2
1
1
NC-48
1
NC-49
NC-50
NC-51
NC-53
1
1
1
1
KIT. EQPT. SPECS
INDIA
UAE
UNIT RATE
AMOUNT
By-Beer Vendor
CEILING HUNG 2 TIER
FOOD PICK UP SHELVES
INFRA RED FOOD WARMER
UNDER COUNTER
REFRIGERATOR
SPREADER TABLE
COMBI OVEN WITH STAND
WATER FILTER FOR COMBI
OVEN
FOUR ZONE INDUCTION
RANGE
SPREADER TABLE
GRIDDLE PLATE
CHAR GRILL
DEEP FAT FRYER
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 61 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
NC-54
1
EXHAUST HOOD WITH UV
GREASE REMOVAL
COMPLETE WITH DEMAND
CONTROL VENTILATION &
FIRE SUPRESSION SYSTEM
NC-55
1
GARBAGE CAN
REFER
NC-61
1
NC-62
NC-64
3
1
NC-65
NC-70
NC-71
NC-72
NC-73
1
1
2
1
1
SLOT CHANNEL / DRAIN
RAIL
REFER SHELVING
SLOT CHANNEL / DRAIN
RAIL
REFER SHELVING
SANDWICH GRILLER
WALL SHELFVES
SLOT TOASTER
GARBAGE CAN
NC-74
NC-75
1
1
NC-76
1
NC-77
1
NC-78
1
NC-80
1
NC-81
1
NC-82
NC-82A
1
1
NC-83
1
KIT. EQPT. SPECS
INDIA
UAE
UNIT RATE
AMOUNT
Local Market
bought out
equipment- ByClient/Operator
WORK TABLE WITH SINK
TABLE TOP CHOPING
BLOCK
UNDER COUNTER
REFRIGERATOR
PICKUP WORK COUNTER
WITH UNDER SPACE FOR
UNDER COUNTER
REFRIGERATOR
CEILING HUNG 2 TIER
FOOD PICK UP SHELVES
BEVERAGE TABLE W/SINK
& TROUGH
GARBAGE CAN
Local Market
bought out
equipment- ByClient/Operator
By-Operator
Local Market
bought out
equipment- ByClient/Operator
WATER BOILER
WATER FILTER FOR WATER
BOILER
ICE CUBE MACHINE W/BIN
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 62 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
NC-83A
1
WATER FILTER FOR ICE
CUBE MACHINE WITH
i20002 REPLACEMENT
CARTRIDGE
WATER COOLER
NC-84
1
NC-84A
1
NC-85
NC-86
NC-90
1
1
1
WATER FILTER FOR WATER
COOLER
DRAIN TROUGH GRATING
STORAGE SHELVING
L-SHAPED SOILED DISH
DROP OFF TABLE WITH
SINK, TABLE MOUNTED
RACK SHELF & CHUTE
NC-91
NC-92
1
1
SOAKING TROLLEY
GARBAGE CAN
NC-93
2
NC-94
NC-95
NC-96
NC-97
1
1
1
1
NC-98
1
PRE- RINSE SPRAY UNIT
WITH FAUCET
DRAIN TROUGH GRATING
DISH WASHING MACHINE
VAPOUR HOOD
CLEAN DISH LANDING
TABLE
WALL MOUNTED RACK
SHELF
MOBILE CLEAN DISH RACK
HAND WASH SINK UNIT
POT WASH SINK UNIT
WALL MOUNTED POT RACK
DRAIN TROUGH GRATING
MOBILE POT RACK
FLUSHING HOSE UNIT
DRAIN TROUGH GRATING
1
KIT. EQPT. SPECS
INDIA
UAE
AMOUNT
Local Market
bought out
equipment- ByClient/Operator
Local Market
bought out
equipment- ByClient/Operator
NC-99
2
NC-100
2
NC-101
1
NC-102
1
NC-103
1
NC-104
1
NC-105
1
NC-106
1
10TH FLOOR
EXECUTIVE LOUNGE
EL-01
1
STONE TOP COUNTER
EL-02
UNIT RATE
By-Interior
Contractor
COFFEE MACHINE WITH
GRINDER
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 63 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
EL-02A
1
EL-05
EL-06
EL-08
1
1
1
EL-09
1
EL-10
1
EL-11
1
EL-15
EL-16
2
2
EL-17
1
EL-18
EL-19
EL-19A
EL-20
1
2
1LOT
2
EL-21
1
EL-24
DESCRIPTION
CLARIS HEAD &
CARTRIDGE M FOR
COFFEE MACHINE WITH
GRINDER
MILK DISPENSER(5LTR.)
CEREAL DISPENSER
DROP IN REFRIGERATED
ICE WELL WITH SNEEZE
GUARD
UNDER COUNTER
REFRIGERATOR
VERTICAL REFRIGERATOR
DROP IN GRANITE FROST
TOP WITH SNEEZE GUARD
STONE TOP COUNTER
CONVEYOR TOASTER
DROP IN HOT PLATE
CHEFFING DISHES
LIGHT BRIDGE WITH STRIP
HEATER
STONE TOP COUNTER
EL-25
1
EL-27
2
WALL SHELVES
EL-28
1
1
SANDWICH GRILLER
EL-30
EL-30A
1
EL-31
AMOUNT
By-Operator
By-Operator
DROP IN TWO ZONE
INDUCTION RANGE
JET EXTRACTION SYSTEM
WITH FIRE SUPRESSION
SYSTEM
MOBILE HOT FOOD
HOLDING CART
WORK TABLE WITH SINK
1
UNIT RATE
By-Interior
Contractor
By-Operator
By-Interior
Contractor
ICE CUBE MACHINE
WATER FILTER FOR UNDER
COUNTER ICE CUBE
MACHINE
1
UPRIGHT REFRIGERATOR
1
UPRIGHT FREEZER
DISH WASH AREA
EL-32
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 64 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JW Marriott Dhaka
BILL OF QUANTITY OF KITCHEN EQUIPMENT
ITEM
NO
QTY
DESCRIPTION
EL-36
1
L-SHAPED SOILED DISH
DROP OFF TABLE WITH
SINK, TABLE MOUNTED
RACK SHELF & CHUTE
EL-37
1
GARBAGE CAN
EL-38
1
EL-39
1
EL-40
EL-41
1
1
EL-42
1
EL-43
EL-44
EL-47
EL-48
EL-49
EL-50
1
1
1
1
1
2
PRE- RINSE SPRAY UNIT
WITH FAUCET
DISH WASH MACHINE HOOD TYPE
VAPOUR HOOD
CLEAN DISH LANDING
TABLE
WALL MOUNTED RACK
SHELF
MOBILE CLEAN DISH RACK
DRAIN TROUGH GRATING
HAND WASH SINK UNIT
MOBILE WORK TABLE
WORK TABLE WITH SINK
GARBAGE CAN
EL-51
1
EL-52
EL-53
EL-54
EL-55
1
1
1
1
KIT. EQPT. SPECS
INDIA
UAE
UNIT RATE
AMOUNT
Local Market
bought out
equipment- ByClient/Operator
Local Market
bought out
equipment- ByClient/Operator
UNDER COUNTER
REFRIGERATOR
TWO ZONE INDUCTION
RANGE
HIGH SPEED OVEN
GRIDDLE PLATE
EXHAUST HOOD WITH FIRE
SUPRESSION SYSTEM
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 65 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
JOARSAHARA DHAKA-BANGLADESH,
SPECIFICATION OF KITCHEN
EQUIPMENT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 66 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: R-01
HAND WASH SINK UNIT
QUANTITY: 01
SIZE
Width:
Depth:
384 mm
353 mm
CAPACITY
6 l/ min
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Wast
e
∅
1½”
ELECTRIC :
Power
NA
Voltage
NA
Height:
512 mm
SPECIFICATIONS
• Wall mounted knee-activated hand wash sink.
• S.S. construction.
• 240mm High Splash.
• Knee operated water faucet.
• Round pressed bowl.
• Depth of Wash Bowl: 150mm.
• With hot and cold water mixer.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
∅
ACCESSORIES:
•
Soap dispenser, Paper dispenser, S.S. Garbage
Bin
SPECIAL NOTE:
SOFINOR
LMASBD
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 67 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : R-02
QUANTITY: 01
SIZE
FLUSHING HOSE UNIT
Width
Depth
Height
230 mm
538 mm
498 mm
CAPACITY
15 m hose reel.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
¾”
Hot
∅
¾”
Waste
∅
NA
ELECTRIC :
Power
Voltage
SPECIFICATIONS
• Heavy duty, cast bronze mixer body, suitable for mixing hot &
cold water.
• Furnished with steel enclosed braided Dunlop hose of 15 M
long with brass end nozzle at working end.
• Able to handle 300 PSI and high temperature
• Heavy duty S.S. Rod hose reel rack for winding hose when not
in use.
• Reel rack with stud bolts for anchoring to rear wall, unit
installed 25 mm away from wall, by inserting 25mm deep SS
bush sleeve on the stud bolts.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
T&S
FISHER
5HR-242-01
29602
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 68 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : R-03
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
550mm
550mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 69 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : R-04
AIR CURTAIN
QUANTITY: 05
SIZE
Width:
Depth:
Height:
1525 mm
208 mm
235 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.75 H.P
Voltage
220v.50c.1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
• Unit suitable for mounting on door opening & height As per plan
& site.
• S.S cover made for high-strength aluminimum & engineering
plastics
• Air guide bar
• Operated either by remote control or at the touch of a button.
• Three speed switch functions low, medium & high speed.
• Adopting optimized electrical machinery
• Unit to be furnished with Two (2) motor, rated at 120W, 4
Blowers
• Maximum velocity at the nozzle to be appox 18 m/s
NA
ACCESSORIES:
•
Power cord, Complete with mounting arrangement.
SPECIAL NOTE:
MITZVAH ENGG.INC
MID LINK
1525mm Long
EQUIVLANT
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 70 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : R-06
MOBILE BUSSING CART
QUANTITY: 06
SIZE
Width:
Depth:
Height:
900 mm
600 mm
1065mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
SPECIFICATIONS
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
EXHAUST
•
NA
150mm deep, 1.6mm Thick S.S. top channel shape.
Four (4) no. 38mm x 38mm x 1.6mm thick S.S.
square pipe legs on castor.
Bottom one (01) 1.2mm thick S.S pan with All sides
turned up 100mm & hemmed outside welded to S.S
legs.
Four (04) no. heavy duty 125mm dia Non marking
rubberized castors all with brakes.
Under sides of top shall be reinforced W/ 25 X 100 X
25 #16 G.A S.S inverted channel.
25mm dia S.S. pipe handle.
GAS:
BTU
NA
Con.
∅
NA
Mm
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 71 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : R-07
MOBILE VEGETABLE CRATE RACK
QUANTITY: 02
SIZE
Width:
Depth:
Height:
950 mm
600 mm
1950mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
Four (4) 1.2 mm thick S.S. Shelves.
Front marine edges with Rear and both sides turned up 50mm &
Hemmed.
S.S. hat type reinforcement
38mm x 38mm x 1.6mm thick S. S. square pipe uprights with
S.S. Adjustable bullet feet.
S.S. shelves welded to S.S. square pipe uprights.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 72 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : R-08
MOBILE PLATEFORM TROLLEY
QUANTITY: 05
SIZE
Width:
Depth:
Height:
900 mm
600 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
1.2mm thick S.S. top channel shape.
Top and body secured to 12/25mm x 75mm x 25/12mm # 1.6 mm
Thick S.S. hat type welded channel frame work.
38mm dia S.S. pipe handle with pipe reinforcement.
150mm high 12mm Dia S.S. pipe railing rear & both sides.
Four (04) no. heavy duty 125mm dia Non marking rubberized
castors all with brakes.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
mm
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 73 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : R-09
INSECT- O- CUTOR
QUANTITY: 02
SIZE
Width:
Depth:
Height:
625 mm
250 mm
175mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• Twin tubes
• Unit suitable for ceiling suspension or mounting on wall,
• A proven approach to killing flies, conveniently and hygienically
• Unit with plastic coated M.S. guards provided
• No fumes, no chemicals, no odours –
• enviro-friendly
ELECTRIC :
Power
0.25 K.W
Voltage
220v.50c.1p
Gas:
BTU
NA
Con.
∅
NA
•
ACCESSORIES:
Power cord, Complete with mounting arrangement.
SPECIAL NOTE:
PCIL
L-L (LOW LINE) PESTOFLASH
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 74 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : R-10
WEIGHING TABLE
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
1800mm
700 mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
1.6mm thick S.S. Top.
150mm High Rear Splash.
Top secured to 12/25mm x 75mm x 25/12mm x1.6 mm Thick S.S.
hat type welded channel frame work.
Full width 1.2mm thick S.S. Bottom shelf .
Six (06) no. 38mm x 38mm x 1.2 mm thick S.S. square pipe legs.
With adjustable bullet feet.
Unit provided One (1) no. Utensil Drawer at Left side,
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 75 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : R-11
BENCH WEIGHING SCALE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
600 mm
350 mm
300 mm
CAPACITY
20 kg.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.02 K.W
Voltage
220v.50c.1p
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIFICATIONS
• Counter top electronic digital scale.
• S.S pan size 240 mm x 300 mm.
• Unit suitable to weigh up to 20 KGs increments of 2 Gms.
• Rechargeable battery back up.
• Display Size : 20mm Red & 20mm Green
• Display Type : 6 digit LED, 7 Segment Number digits
• Operating Temprature : 10oC to 40oC
• Humidity : 95% RH (Non Condensing)
• Tare Range : To Capacity by Subtraction
• Stabilization Time : 2.5 Sec
• With In built Battery Charger.
• With 4 Number of key
• Auto power of function
• Stainless Steel platter of Mart Finishing
• With Advanced Microprocessor based design
• Fast Weighing response
•
• Power cord
• RS 232 Interface
• Counting Function
SPECIAL NOTE:
SATWIK
IQ 100
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 76 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : R-12
PLATFORM WEIGHING SCALE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
700 mm
700 mm
1050 mm
CAPACITY
150 kg.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.03K.W
Voltage
220v.50c.1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
• Freestanding electronic digital scale.
• S.S Weighing platform of size appox. 600 mm w X 600 mm d.
• Unit suitable to weigh up to 300 KGs with 50 Gms increments.
• digital pillar mounted display
• Rechargeable battery back up.
• Bottom stucture is metal powder coated rust free
• Stainless steel platter.
• With Advanced microprocessor based design.
• Fast weighing response time
• Battery backup for 25 hrs.
• Auto power off
• Simple & easy operation with feather touch keys
• High brightness LED display.
NA
ACCESSORIES:
•
•
Power cord.
RS-232 Serial interface.
SPECIAL NOTE:
SATWIK
VIK300L
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 77 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : R-13
AIR CURTAIN
QUANTITY: 02
SIZE
Width:
Depth:
Height:
1220 mm
208 mm
235 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.5 H.P
Voltage
220v.50c.1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
•
• Unit suitable for mounting on door opening & height As per plan
& site.
• S.S cover made for high-strength aluminimum & engineering
plastics
• Air guide bar
• Operated either by remote control or at the touch of a button.
• Three speed switch functions low, medium & high speed.
• Adopting optimized electrical machinery
• Unit to be furnished with Two (2) motor, rated at 120W, 4
Blowers
• Maximum velocity at the nozzle to be appox 18 m/s
NA
ACCESSORIES:
•
Power cord, Complete with mounting arrangement.
SPECIAL NOTE:
MITZVAH ENGG.INC
MID LINK
MEI 120 (A)
EQUIVLANT
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 78 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : R-13A
AIR CURTAIN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1800 mm
208 mm
235 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.75 H.P.
Voltage
220v.50c.1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
• Unit suitable for mounting on door opening & height As per plan
& site.
• S.S cover made for high-strength aluminimum & engineering
plastics
• Air guide bar
• Operated either by remote control or at the touch of a button.
• Three speed switch functions low, medium & high speed.
• Adopting optimized electrical machinery
• Unit to be furnished with Three (3) motor, rated at 120W, 6
Blowers
• Maximum velocity at the nozzle to be appox 18 m/s
NA
ACCESSORIES:
•
Power cord, Complete with mounting arrangement.
SPECIAL NOTE:
MITZVAH ENGG.INC
MID LINK
MEI 180 (A)
EQUIVLANT
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 79 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : R-19
VEG. WASH DOUBLE SINK UNIT
QUANTITY: 01
SIZE
Width:
2950 mm
Depth:
Height:
750 mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
•
•
Cold
∅
½”
Hot
∅
½”
Waste
∅
(2)2”
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
SPECIFICATIONS
2.0 mm Thick S.S. Top.
150mm High Rear and both sides Splash. Front turned up 25mm,
returned 40mm, down 75mm & in 12mm.
• Top secured to 12/25mm x 75mm x 25/12mm x 2.0 mm Thick S.S.
hat type welded channel frame work.
• Right side of unit provided Two (2) nos. 900 mm x 550mm x
300mm deep, 2.0mm thick. S.S. sinks, Sink Complete with 50mm
dia lever handle operated waste outlet & rear connected overflow.
• Eight (08) no. 38mm x 38mm x 1.2 mm thick S.S. square pipe
legs. With adjustable bullet feet.
• 25mm x 25mm S.S. pipe cross bracing welded to legs at Rear &
both sides. Left side front open for mobile equipment garbage can.
• 0.9mm thick S.S Apron front of Sink.
• Two (2) No. 1.2 mm thick S.S. 50mm high Removable perforated
Strainer basket with handles. \
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 80 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : R-20
WALL SHELVES
QUANTITY: 02
SIZE
Width:
Depth:
Height:
1200 mm
300 mm
200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
1.2 mm thick S.S. Wall shelves.
Rear & both sides turned up 50mm & Hemmed outside, Front
turned down 38mm & in 12mm.
Shelves secured to bracket with acorn S.S. nuts & bolts.
Three (03) no. 2.0 mm thick S.S. wall Brackets. Secured to top
with acorn Nuts & Bolts & Bracket secured to wall with anchor
fasteners.
Mounting Height- 1700mm A.F.F.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 81 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : R-21
GARBAGE CAN
QUANTITY: 01
SIZE
Width:
502 mm
Dia:
410 mm
CAPACITY
70 liters
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Height:
673 mm
SPECIFICATIONS
• Polyethylene Construction.
• With rust, dent, chip or peel free.
• Heavy duty Pedal Mechanism.
• Tight fitting overlapping lid.
• With Round Corner.
• 70 Liter Container Equipped with 2 full plastic Rear Wheels for
better maneuverability.
• Unit should be suitable for work in Food service area.
• Color and qty As Per operator.
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Color and qty As Per operator.
PROBBAX
S0-1271
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 82 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : R-22
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1550mm
350mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 83 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : R-23
VEGETABLE WASHER (TILT TYPE)
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1090mm
1115 mm
1025 mm
CAPACITY
Drum capacity 300 ltr.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
1”
Hot
∅
NA
Waste
∅
2”
ELECTRIC :
Power
1.45 KW
Voltage
440v-50c-3p
SPECIFICATIONS
• Free Standing equipment with adjustable legs.
• Tilting type machine.
• AISI 304 SS drum with capacity of 300 ltr.
• With motor driven washing pump.
• Hydraulic valves for drain.
• SS Water nozzle.
• Hydraulic tilting mechanism.
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
Trolleys for vegetable.
SPECIAL NOTE:
NILMA
ATIR-II (TILTING TYPE)
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 84 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : R-24
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1050mm
350mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 85 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : R-25
MOBILE VEGETABLE CRATE RACK
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1050 mm
500 mm
1950mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
Four (4) 1.2 mm thick S.S. Shelves.
Front marine edges with Rear and both sides turned up 50mm &
Hemmed.
S.S. hat type reinforcement
38mm x 38mm x 1.6mm thick S. S. square pipe uprights with
S.S. Adjustable bullet feet.
S.S. shelves welded to S.S. square pipe uprights.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 86 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : R-26
PRE- RINSE SPRAY UNIT WITH FAUCET
QUANTITY: 01
SIZE
Width:
315mm
Depth:
358mm
Height:
850mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
Hot
ᴓ
Waste ᴓ
ELECTRIC :
Power
Voltage
EXHAUST
NA
GAS:
BTU
Con.
½”
½”
NA
NA
NA
SPECIFICATIONS
•
•
•
•
•
NA
ᴓ NA
ACCESSORIES:
•
•
•
•
•
Easy Install Pre-Rinse, Spring Action, 8" Wall Mount Base,
Wall Bracket, & Swivel
8" wall mount mixing faucet with polished chrome plated
brass body,
18" riser,
44" flexible stainless steel hose with heat resistant handle
and swivel,
1.42 GPM spray valve, compression cartridges with spring
checks,
lever handles,
1/2" NPT female inlets,
6" adjustable wall bracket,
spray valve holder and overhead spring.
Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9
and NSF 372. EP Act 2005 compliant
Wall mounting bracket and finger hook
SPECIAL NOTE:
T&S
B-0133-B-SWV
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 87 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : R-27
QUANTITY: 01
SIZE
FLUSHING HOSE UNIT
Width
Depth
Height
230 mm
538 mm
498 mm
CAPACITY
15 m hose reel.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
¾”
Hot
∅
¾”
Waste
∅
NA
ELECTRIC :
Power
Voltage
SPECIFICATIONS
• Heavy duty, cast bronze mixer body, suitable for mixing hot &
cold water.
• Furnished with steel enclosed braided Dunlop hose of 15 M
long with brass end nozzle at working end.
• Able to handle 300 PSI and high temperature
• Heavy duty S.S. Rod hose reel rack for winding hose when not
in use.
• Reel rack with stud bolts for anchoring to rear wall, unit
installed 25 mm away from wall, by inserting 25mm deep SS
bush sleeve on the stud bolts.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
T&S
FISHER
5HR-242-01
29602
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 88 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : R-28
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
2650mm
1500mm
150 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 150 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 89 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : R-29
THREE TIER - SERVICE TROLLEY
QUANTITY: 07
SIZE
Width:
Depth:
Height:
900 mm
600 mm
950mm
CAPACITY
3 SHELVES EACH CAPACITY TO
HOLD 80KG
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
SPECIFICATIONS
• Design The serving trolley consists CNS 18/10 (AISI 304),
• Two welded-in, deep-drawn shelves located between a stable round
tube with a diameter of = 25 mm. The shelf surface is micro-polished.
The round tubes on the short sides are used as push handles. A
circumferential 35 mm beveled profile edge on the shelves, the rollerburnished shelf edge and one-piece welded seams between the tube
frame and the shelves increase the stability of the serving trolley.
• The shelves are lined underneath with a noise-insulating antidumping
mat.
• The serving trolley on s/s castors (4 steering castors, 2 of them with
locks, castor diameter 125 mm). The castors inserted in the tube frame.
Solid synthetic (polyamide) wall guards at all four corners protect
against damage.
• Load-bearing capacity per shelf: 80 kg
• Number of shelves: 3
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
BLANCO GERMANY
SW 8 X 5 -3
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 90 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: G-01
HAND WASH SINK UNIT
QUANTITY: 01
SIZE
Width:
Depth:
384 mm
353 mm
CAPACITY
6 l/ min
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Wast
e
∅
1½”
ELECTRIC :
Power
NA
Voltage
NA
Height:
512 mm
SPECIFICATIONS
• Wall mounted knee-activated hand wash sink.
• S.S. construction.
• 240mm High Splash.
• Knee operated water faucet.
• Round pressed bowl.
• Depth of Wash Bowl: 150mm.
• With hot and cold water mixer.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
∅
ACCESSORIES:
•
Soap dispenser, Paper dispenser, S.S. Garbage
Bin
SPECIAL NOTE:
SOFINOR
LMASBD
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 91 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: G-02
GARBAGE SORTING TABLE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
2400 mm
750 mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Waste
∅
1½”
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
•
EXHAUST
•
NA
•
GAS:
BTU
NA
Con.
∅
2.0 mm Thick Top.
Front and both sides turned up 25mm, returned 40mm, turned
down 75mm & in 12mm.
150mm High Rear splash.
Top secured to 12/25mm x 75mm x 25/12mm x 1.6 mm Thick
S.S. hat type welded channel frame work.
One (01) 150mm dia x 100mm high Garbage chute right side of
table.
Six (06) no. 38mm x 38mm x 1.2 mm thick S.S. square pipe legs.
With adjustable bullet feet.
25mmx25mm S.S. square pipe cross bracing welded to legs at
Rear & both sides.
550mm x 100mm x 40mm high 1.6mm thick S.S. trough with S.S.
anti splash grating at right side.
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 92 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
TEM NO : G-03
PRE- RINSE SPRAY UNIT WITH FAUCET
QUANTITY: 01
SIZE
Width:
315mm
Depth:
358mm
Height:
850mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
Hot
ᴓ
Waste ᴓ
ELECTRIC :
Power
Voltage
EXHAUST
NA
GAS:
BTU
Con.
½”
½”
NA
NA
NA
SPECIFICATIONS
•
•
•
•
•
NA
ᴓ NA
ACCESSORIES:
•
•
•
•
•
Easy Install Pre-Rinse, Spring Action, 8" Wall Mount Base,
Wall Bracket, & Swivel
8" wall mount mixing faucet with polished chrome plated
brass body,
18" riser,
44" flexible stainless steel hose with heat resistant handle
and swivel,
1.42 GPM spray valve, compression cartridges with spring
checks,
lever handles,
1/2" NPT female inlets,
6" adjustable wall bracket,
spray valve holder and overhead spring.
Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9
and NSF 372. EP Act 2005 compliant
Wall mounting bracket and finger hook
SPECIAL NOTE:
T&S
B-0133-B-SWV
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 93 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : G-04
AIR CURTAIN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1800 mm
208 mm
235 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.75 H.P.
Voltage
220v.50c.1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
• Unit suitable for mounting on door opening & height As per plan
& site.
• S.S cover made for high-strength aluminimum & engineering
plastics
• Air guide bar
• Operated either by remote control or at the touch of a button.
• Three speed switch functions low, medium & high speed.
• Adopting optimized electrical machinery
• Unit to be furnished with Three (3) motor, rated at 120W, 6
Blowers
• Maximum velocity at the nozzle to be appox 18 m/s
NA
ACCESSORIES:
•
Power cord, Complete with mounting arrangement.
SPECIAL NOTE:
MITZVAH ENGG.INC
MID LINK
MEI 180 (A)
EQUIVLANT
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 94 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : G-06
QUANTITY: 01
SIZE
FLUSHING HOSE UNIT
Width
Depth
Height
230 mm
538 mm
498 mm
CAPACITY
15 m hose reel.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
¾”
Hot
∅
¾”
Waste
∅
NA
ELECTRIC :
Power
Voltage
SPECIFICATIONS
• Heavy duty, cast bronze mixer body, suitable for mixing hot &
cold water.
• Furnished with steel enclosed braided Dunlop hose of 15 M
long with brass end nozzle at working end.
• Able to handle 300 PSI and high temperature
• Heavy duty S.S. Rod hose reel rack for winding hose when not
in use.
• Reel rack with stud bolts for anchoring to rear wall, unit
installed 25 mm away from wall, by inserting 25mm deep SS
bush sleeve on the stud bolts.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
T&S
FISHER
5HR-242-01
29602
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 95 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : G-07
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
2650mm
1500mm
150 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 150 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 96 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : G-08
INSECT- O- CUTOR
QUANTITY: 01
SIZE
Width:
Depth:
Height:
625 mm
250 mm
175mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• Twin tubes
• Unit suitable for ceiling suspension or mounting on wall,
• A proven approach to killing flies, conveniently and hygienically
• Unit with plastic coated M.S. guards provided
• No fumes, no chemicals, no odours –
• enviro-friendly
ELECTRIC :
Power
0.25 K.W
Voltage
220v.50c.1p
Gas:
BTU
NA
Con.
∅
NA
•
ACCESSORIES:
Power cord, Complete with mounting arrangement.
SPECIAL NOTE:
PCIL
L-L (LOW LINE) PESTOFLASH
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 97 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : G-09
CAN WASHER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
895 mm
762 mm
2184 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Hot
∅
¾”
Over
flow
∅
1 ¼”
Waste
∅
1 ¼”
ELECTRIC :
Power
10 .0 HP
Voltage
440v-50c-3p
SPECIFICATIONS
• Unit suitable to wash 24” dia. X 36” high container
• Full SS construction.
• Cabinet with double skinned hinged door.
• With adjustable wash and rinse cycle.
• Separate wash and rinse unit.
• Should filter and recalculate wash water.
• External rinse hose and spray gun.
• Should have moister resistant gauge to measure wash
temperature, wash pressure and rinse temperature.
• Legs – SS and adjustable.
• With steam exhaust vent.
EXHAUST
6 ¾” Collared 1000 CFM
GAS:
BTU
NA
Con.
∅
NA
mm
ACCESSORIES:
SPECIAL NOTE:
DOUGLAS
GCW-1
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 98 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : G-10
TRASH COMPACTOR
QUANTITY: 01
SIZE
Width:
Depth:
Height:
678 mm
675 mm
1740 mm
CAPACITY
25 – 30 Kg. /Cycle.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.75 KW
Voltage
220v-50c-1p
SPECIFICATIONS
• Unit with single stroke operation
• With constant pressure setting (night mode)
• With interlock on waste in chute
• With interlock on trolley bin
• With wheeled trolley bin
• With 100 bags, wire ties and tying tool
• Stainless steel trolley liners
• Unit with compaction force of 4500 Kg and compaction ratio of
5:1
• Cycle time of 23 seconD.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
•
Additional trolleys, Additional 100 bags with ties, Power cord
with plug
SPECIAL NOTE:
IMC
ORWAK
IP-500
5030
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 99 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: G-11
MOBILE CAN DRYING RACK
QUANTITY: 08
SIZE :
Width:
Depth:
Height:
2100mm
750 mm
2100mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
NA
Hot
ᴓ
NA
Wast
e
ᴓ
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
Three (3) no. S.S. pipe shelves.
First shelf 200 A.F.F., Second 1075 A.F.F. & Third shelf
at 1825mm A.F.F.
Shelf outer tube 32mm dia S.S. pipe with 25mm dia
S.S pipe welded to outer tube at 75 c/c.
(4) no. 38mm dia S.S. pipe upright on castor.
(4) no. 150mm dia Non marking rubberized castors
two with brakes.
EXHAUST
NA
GAS:
BTU
NA
Con.
ᴓ
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 100 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: G-12
GARBAGE SKIP FOR FOOD WASTE
QUANTITY: 12
SIZE
Width:
Depth:
Height:
725mm
580mm
1075mm
CAPACITY
240 LTRS
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
SPECIFICATIONS
•
•
•
•
240Ltrs. capacity.
Complete with Lid and handles
Heavy duty castors with brakes.,
Color as per operator.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
∅
ACCESSORIES:
SPECIAL NOTE:
Size to be verify as per Entry and exit doors
PROBBAX
As per Cap.
LOCAL MARKET EQUIPMENT
CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
BY-
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 101 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: G-14
MOBILE CAN DRYING RACK
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
1650mm
750 mm
2100mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
NA
Hot
ᴓ
NA
Wast
e
ᴓ
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
Three (3) no. S.S. pipe shelves.
First shelf 200 A.F.F., Second 1075 A.F.F. & Third shelf
at 1825mm A.F.F.
Shelf outer tube 32mm dia S.S. pipe with 25mm dia
S.S pipe welded to outer tube at 75 c/c.
(4) no. 38mm dia S.S. pipe upright on castor.
(4) no. 150mm dia Non marking rubberized castors
two with brakes.
EXHAUST
NA
GAS:
BTU
NA
Con.
ᴓ
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 102 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : G-16
AIR CURTAIN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1500 mm
208 mm
235 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.75 H.P.
Voltage
220v.50c.1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
• Unit suitable for mounting on door opening & height As per plan
& site.
• S.S cover made for high-strength aluminimum & engineering
plastics
• Air guide bar
• Operated either by remote control or at the touch of a button.
• Three speed switch functions low, medium & high speed.
• Adopting optimized electrical machinery
• Unit to be furnished with Two (2) motor, rated at 120W & One
(1) motor, rated at 80W, 5 Blowers
• Maximum velocity at the nozzle to be appox 18 m/s
NA
ACCESSORIES:
•
Power cord, Complete with mounting arrangement.
SPECIAL NOTE:
MITZVAH ENGG.INC
MID LINK
MEI 150 (A)
EQUIVLANT
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 103 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : G-17
THREE TIER - SERVICE TROLLEY
QUANTITY: 01
SIZE
WIDTH:
DEPTH:
HEIGHT:
895MM
595MM
1023MM
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
cold
hot
waste
ELECTRIC :
Power
NA
Voltage
NA
GAS:
BTU
NA
CON.
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Stainless steel heavy duty general purpose trolley
Welded construction
3 deep drawn shelves
Made from high quality stainless steel
800x500mm shelves
Rugged construction made from 2 tubular steel bar
push handles, ∅ 25mm
Reinforces Chassis with 2 transversely welded in
stainless steel profile as cross bar
278mm working height between shelves
Height of top shelf is 919mm
60Kg load per each shelf
180Kg load capacity
4 swivel castors, 2 of them with total brake, ∅125mm
Housing made from zinc-chrome plated steel
4 disc bumpers in corners made from elastic and
shock resistant plastic material
Net Weight: 20.7Kg
ACCESSORIES:
SPECIAL NOTE:
HUPFER
SSW 8 X 5/3 (0112202)
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 104 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : G-18
CHARCOAL TROLLEY
QUANTITY: 06
SIZE
Width:
Depth:
Height:
900 mm
600 mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
EXHAUST
200mm deep, 2.0mm Thick S.S. top channel shape.
Four (4) no. 38mm x 38mm x 1.6mm thick S.S. square pipe legs
on castor.
One (01) no 1.2mm thick S.S pan with All sides turned up 100mm
& hemmed outside welded to S.S legs.
Four (04) no. heavy duty 125mm dia Non marking rubberized
castors all with brakes.
Under sides of top shall be reinforced W/ 25 X 100 X 25 #16 G.A
S.S inverted channel.
25mm dia S.S. pipe handle.
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 105 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : G-22
SLOT CHANNEL / DRAIN RAIL
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1450mm
250mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
Channels:
Material: 2mm. thick Stainless Steel Grade: 304 Pickle
Passivated. Levelling bolts to adjust height. Inclusive of foul air trap, silt
basket, drainage ring (O-ring)
Gully: Corrosion protected deep-drawn gully body stainless steel grade
304. Pickle Passivated. Gully body outer diameter is 178mm, with vertical
outlet size 110 mm diameters.
NA
Grating for Gully top: Anti-slip electro-polished stainless steel
grating,with load bar size 30mm X 2mm.Load Class L,
according to EN1253.
Gratings are made by arc-welding (not spot welding)
Side bottom Inlets :50mm Socketed Side inlet made of Pickle Passivated
Stainless Steel & EPDM seal for taking indirect waste from surrounding
kitchen equipment if any
Function
To drain heavy waste water via in-direct drainage from food service
equipment and kitchen floor.
Modular structure for gratings with smaller individual grating to fit the
size of the channel to avoid work injury from being too heavy to bulky to
handle
Slab Penetration: Requires 110mm dia waste drain connection. Requires floor cut-out and recess. Refer to
WPR drawings. Location/number of drain pipes from food service equipments to be
coordinated with MEP Consultant.
SAFETY NORMS:
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 106 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : G-23
GARBAGE SKIP
QUANTITY: 05
SIZE
Width:
Depth:
Height:
1260mm
750mm
1180mm
CAPACITY
660 LTRS
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
660 Ltrs. capacity.
Complete with Lid and handles
Heavy duty castors with brakes.,
Color as per operator.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
∅
ACCESSORIES:
SPECIAL NOTE:
KEY
129P055N
LOCAL
MARKET
CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
EQUIPMENT
BY-
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 107 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-01
HAND WASH SINK UNIT
QUANTITY: 03
SIZE
Width:
Depth:
384 mm
353 mm
CAPACITY
6 l/ min
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Wast
e
∅
1½”
ELECTRIC :
Power
NA
Voltage
NA
Height:
512 mm
SPECIFICATIONS
• Wall mounted knee-activated hand wash sink.
• S.S. construction.
• 240mm High Splash.
• Knee operated water faucet.
• Round pressed bowl.
• Depth of Wash Bowl: 150mm.
• With hot and cold water mixer.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
∅
ACCESSORIES:
•
Soap dispenser, Paper dispenser, S.S. Garbage
Bin
SPECIAL NOTE:
SOFINOR
LMASBD
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 108 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-02
PICK-UP COUNTER W/ UNDER SPACE FOR
UNDER COUNTER REFRIGERATOR & NONHEATED DISH STORAGE CABINET
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1550mm
1150mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
•
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
2.0 mm thick S.S. Top.
Without splash.
All sides 0.9mm thick cladding
Top and body secured to 12/25mm x 75mm x 25/12mm x 1.6
thick S.S. hat type welded channel frame work. .
Six (06) no. 150mm high 38mm dia S.S. legs with S.S. adjustable
bullet feet.
Provide Front side open space for parking modular equipment
under counter refrigerator w/drawer.
1.2mm thick centre partition
Back side as shown provide non heated dish storage cabinet
(Approx Clear 400mm internal), complete with Full width
bottom & intermediate shelves, 12mm thick Insulated sliding
door with Integral handle.
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 109 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-02A
UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
1420 mm
660mm
800 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
NA
Hot
ᴓ
NA
Waste
ᴓ
NA
ELECTRIC :
Power
0.35 K.W.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
ᴓ
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Equipment suitable to be mounted below S.S top.
304 S/S interior and exterior
0.9mm thick S.S. at back and base
Four drawers comply for GN 1/1
Ambient temperature 43 deg C.
Internal Temp +1 Deg C to +4 Deg C.
Air-cooled.
REFRIGERANT GAS: R-134 A
Compressor unit on right side to be provided. Removable
Cassette type condensing unit
Rounded edge for internal chamber
Automatic defrost
Anti condensation heaters fitted to door mullions
Digital temperature controller with compressor running
indicator, defrost indicator, condensing cleaning light, fan
running indicator, high low temperature alarm.
Four (04) nos. legs with bullet feet.
ACCESSORIES:
SPECIAL NOTE:
FOASTER
WILLIAMS
IGLU
PRO1/2 H (DRAWER)
HO2U-NNX (DRAWER)
equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 110 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-03
INFRA RED FOOD WARMER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1219 mm
152 mm
64 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
1.1 K.W
Voltage
220v-50c-1p
•
•
Sturdy continuous stainless steel housings.
Pre-focused heat.
Coated shatter-resistant incandescent lights
Include as standard equipment four stainless steel shelf
mounting tabs
an on-off switch to be installed to either the front or rear of the
unit.
The infrared heating element shall be tubular metal sheathed.
Suitable to mounted below of ceiling hung food pick up shelf.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
Breath protector, cord and plug set, indicator light, and infinite control
built-in.
SPECIAL NOTE:
HATCO
GRH-48
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 111 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-04
CEILING HUNG 2 TIER FOOD PICK UP
SHELVES
QUANTITY: 01
SIZE
Width:
Depth:
Height:
5150mm
300 mm
300mm
+1000mm
rod
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
EXHAUST
1.2mm thick S.S. shelves.
Lower shelf all sides turned down 40mm & in 12mm, bottom of
shelves to be closed.
Upper shelf front & both sides turned down 40mm & in 12mm,
Rear turned up 50mm & hemmed, bottom of shelves to be closed.
S.S. hanger rod size as per ceiling height.
25mm x 25mm S.S. pipe hanging support.
Mounting Height-1200mm A.F.F.
Upper shelf of unit suitable mounting arrangement for infra red
food warmer.
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 112 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-06
INFRA RED FOOD WARMER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1524 mm
152 mm
64 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
1.4 K.W
Voltage
220v-50c-1p
•
•
Sturdy continuous stainless steel housings.
Pre-focused heat.
Coated shatter-resistant incandescent lights
Include as standard equipment four stainless steel shelf
mounting tabs
an on-off switch to be installed to either the front or rear of the
unit.
The infrared heating element shall be tubular metal sheathed.
Suitable to mounted below of ceiling hung food pick up shelf.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
Breath protector, cord and plug set, indicator light, and infinite control
built-in.
SPECIAL NOTE:
HATCO
GRH-60
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 113 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-07
PICKUP COUNTER WITH SINK, HEATED &
NON HEATED DISH STORAGE CABINET
QUANTITY: 01
SIZE
Width:
Depth:
Height:
3600mm
1150mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
1/2"
Hot
∅
1/2"
Waste
∅
2"
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
3.0 K.W.
Voltage
220v-50c-1p
•
EXHAUST
•
•
NA
GAS:
BTU
NA
Con.
∅
NA
•
•
•
2.0 mm thick S.S. Top.
Without splash.
All sides 0.9mm thick cladding
Top and body secured to 12/25mm x 75mm x 25/12mm x 1.6
thick S.S. hat type welded channel frame work. .
Twelve (12) no. 150mm high 38mm square pipe S.S. legs with
S.S. adjustable bullet feet.
Right side of unit provided one (01) no. 450 mm x 450 mm x
200mm deep, 1.6 mm thick. S.S. sinks, Sink Complete with
50mm dia lever handle operated waste outlet & rear connected
overflow.
0.9mm thick S.S Apron front of Sink.
Left side of sink balance space provide 1.2mm thick part Bottom
and part middle shelf.
0.9mm thick dbl pan centre partition with 12mm thick insulation
Back side as shown provide heated dish storage cabinet
(Approx Clear 400mm internal), complete with Full width
bottom & intermediate shelves, 12mm thick Insulation top rear
and sides. Insulated sliding door with Integral handle. 3.0 K.W.
Heating element clamped under side of perforated shelf. Control
panel at left side complete with Thermostat, on off switch,
indicator & controls.
Back side as shown provide non heated dish storage cabinet
(Approx Clear 400mm internal), complete with Full width
bottom & intermediate shelves, 12mm thick Insulated sliding
door with Integral handle.
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 114 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-08
MICROWAVE OVEN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
550 mm
514 mm
362 mm
CAPACITY
34 LTRS
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
1.8 K.W
Voltage
220v-50c-1p
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
Counter Top.
Inter & Exterior S.S Construction.
Digital display.
Countdown timer.
With Two Magnetron(s).
Programable.
Removable airs filter with clean filter reminder.
See through door,
Pull handle door opening.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
Standard Accessories.
SPECIAL NOTE:
MENU-MASTER
MERRY-CHEF
DFS 18E
HD 1925
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 115 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-11
MOBILE WORK TABLE
QUANTITY: 03
SIZE
Width:
Depth:
Height:
1300mm
700 mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
2.0 mm Thick S.S. Top.
Top secured to 12/25mm x 75mm x 25/12mm # 1.6 mm Thick S.S.
hat type welded channel frame work.
38mm x 38mm x 1.6mm thick S.S. square pipe legs. On castor.
Full width 1.2 mm thick S.S. Bottom & intermediate shelves.
Four (4) no. 125mm Dia Non marking rubberized castors two (2)
with brakes.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 116 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-17
WORK TABLE WITH SINK & UNDER SPACE
FOR UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
4400 mm
750 mm
865mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Waste
∅
2”
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
EXHAUST
•
•
NA
GAS:
BTU
NA
Con.
∅
2.0mm thick S.S. Top.
150mm High Rear and Right splash.
Top secured to 12/25mm x 75mm x 25/12mm x 2.0 mm Thick S.S.
hat type welded channel frame work.
Eight (08) no. 38mm x 38mm x 1.2 mm thick S.S. square pipe legs,
with adjustable bullet feet.
Left side of unit provide One (1) no. 450mm x 450mm x 200mm
deep x 2.0mm thick S.S. sink, Sink Complete with 50mm dia lever
handle operated waste outlet & rear connected overflow.
25mm x 25mm x 1.6mm thick S.S. square pipe cross bracing
welded to legs at as shown.
0.9mm thick S.S Apron front & left of Sink.
Right side of sink provided space for mobile ingredient bins &
UNDER COUNTER REFRIGERATOR refrigerator.
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 117 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-18
CEILING HUNG 2 TIER SHELVES
QUANTITY: 01
SIZE
Width:
Depth:
Height:
4400 mm
300 mm
300mm
+1000mm
rod
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
1.2mm thick S.S. shelves.
Front turned down 40mm & in 12mm, Rear & both sides turned
up 50mm, bottom of shelves to be closed.
S.S. hanger rod size as per ceiling height.
25mm x 25mm S.S. pipe hanging support.
Mounting Height-1400mm A.F.F.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 118 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-21
MOBILE INGREDIENT BINS
QUANTITY: 02
SIZE
Width:
Depth:
Height:
419 mm
749 mm
711 mm
CAPACITY
Sugar-226 lbs/Flour-150 Lbs.
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
NA
Hot
ᴓ
NA
Waste
ᴓ
NA
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
• Design of lid encourages spilled liquids to drain off back lid while
protecting contents. Two-piece lid comes apart for easy cleaning.
• The break-resistant, polycarbonate lids are clear to easily identify
contents.
• A convenient S-hook is provided on the front edge for hanging
Scoop.
• Heavy-duty 3" (76 cm) non-marking casters, 2 front swivel, 2 rear
fixed for easy maneuvering.
EXHAUST
NA
GAS:
BTU
NA
Con.
ᴓ
ACCESSORIES:
Unit Complete with Scoop and Scoop Holder.
SPECIAL NOTE:
.
CAMBRO
HUPFER
IBS27
MTW/K 0124292
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 119 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-22
SALAMANDER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
680 mm
430 mm
410 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
3.3 K.W
Voltage
220v-50c-1p
SPECIFICATIONS
•
•
•
•
•
•
•
•
Wall mounted
Electrically heated
Vertically movable top.
Two independent heating zones with separate controls.
With pull out drip tray.
Variable height level 160mm.
Power regulator radiating heating element.
Unit complete with 1 wall console with integrated panel.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
Accessories for wall mounting.
All Accessories for installation and operation.
SPECIAL NOTE:
ELECTROLUX
MKN
EQUIVLANT
0521704 Vario
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 120 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-23
UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
1865mm
660 mm
800 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.45 K.W.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Equipment suitable to be mounted below S.S top.
304 S/S interior and exterior
0.9mm thick S.S. at back and base
Three (03) no. door with handle
Door opening as per GN. 1/1 pan.
Door activated lights
Six (06) no. PE coated shelves
Ambient temperature 43 deg C.
Internal Temp +1 Deg C to +4 Deg C.
Air-cooled.
REFRIGERANT GAS: R-134 A
Compressor unit on Right side to be provided.
Removable Cassette type condensing unit
Rounded edge for internal chamber
Automatic defrost
Anti condensation heaters fitted to door mullions
Digital temperature controller with compressor running
indicator, defrost indicator, condensing cleaning light, fan
running indicator, high low temperature alarm.
Six (06) nos. legs with bullet feet.
ACCESSORIES:
SPECIAL NOTE:
FOSTER
WILLIAMS
IGLU
PRO1/3 H
HO3U-DDDX
equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 121 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BK-25
SERVICE CONSOLE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
4800mm
200 mm.
1250mm+Up
false ceiling
to
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
SPECIFICATIONS
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
Power
NA
•
•
Voltage
NA
ELECTRIC :
S.S 304 1.2 mm thick Construction.
Removable Panel.
Suitable to be mounted above floor.
Pre-piped for Water, Drainage, Electrical Services required as per
cooking battery.
Three section for water, Electrical and gas services
Removable panels
Gas:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with plan,
elevation and section to be submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 122 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-26
SINGLE BURNER STOCK POT RANGE
QUANTITY: 03
SIZE :
Width:
Depth:
Height:
900mm
900mm
610mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
70,000 ea.
Con.
∅
SPECIFICATIONS
• 2.0 mm thick S.S. Top.
• 600 mm Rear splash height and profile to be match adjoining
modular Cooking battery
• Top and body secured to S.S. frame work.
• Exterior 1.2mm thick S.S. cladding.
• 25mm x 25mm S.S. square pipe cross bracing.
• One (1) no. 500mm x 500mm Cast iron grates (Removable).
• One (1) no. H.P. burner with pilot lamp.
• One (1) no. 1.2mm thick S.S. drip tray with Integral handle.
• Built in pressure Controller regulator.
• 38mm x 38mm S.S. square pipe legs. With adjustable bullet feet.
• Mounting height 1125mm A.F.F. at S.S. service console.
• Front profile/ rear splash height and profile to be match
adjoining modular cooking battery.
¾”
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 123 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-27
SPREADER TABLE
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
600mm
900mm
810mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
•
•
•
EXHAUST
2.0mm thick S.S. Top.
150 mm high rear splash
Top and body secured to 12/25mm x 75mm x 25/12mm x 1.6 mm
Thick S.S. hat type welded channel frame work.
Four (4) no., 38mm x 38mm x 1.6mm thick S.S. square pipe legs
with S.S. adjustable bullet feet.
One (01) no. Sliding Drawer with Six (6) no 1/6 G.N pan .
1.2mm thick S.S. bottom shelf.
0.9mm thick S.S. cladding.
Front profile/ rear splash thickness and profile to be match
adjoining cooking battery.
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 124 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-28
CHINESE WOK RANGE
QUANTITY: 01
SIZE:
Width:
Depth:
Height:
1500 mm
900mm
810mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½“
Hot
∅
NA
Waste
∅
2“
ELECTRIC :
Power
0.2 k.w.
Voltage
220v-50c-1p
SPECIFICATIONS
• Free Standing Chinese Wok range,
• Full S.S. Construction,
• Two (02) no 400mm dia pans support with high pressure Burner
rated at 110000 buts./hr.
• One no 225mm dia rear pan
• 440mm High Rear splash
• S.S. base with rear cladding ,
• S.S. legs with bullet feet.
• Two (02) no Splash mounted Water faucets to be provided,
• Piezo ignition.
EXHAUST
NA
GAS:
BTU
220,000
Con.
∅
¾”
ACCESSORIES:
Accessories for installation & operation.
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
YPT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 125 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-29
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1050mm
350mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 126 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-30
S.S CLADDED MOBILE TANDOOR
QUANTITY: 05
SIZE
Width:
Depth:
Height:
900 mm
900 mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
1.6mm thick S.S. Top.
150mm high rear Splash.
Commercial grade heavy duty tandoor approx 700mm dia x 700mm
height with 300mm dia mouth.
• Top and body secured to 12/25mm x 75mm x 25/12mm # 1.6 mm
Thick S.S. hat type welded channel frame work..
• Exterior # 18 Ga. S.S. cladding.
• Interior # 18 Ga. M.S. cladding.
• 40mm thick Mineral wool insulation.
• Front S.S. Ash removable opening with shutter.
• (4) no. heavy duty 125mm Dia Non marking rubberized castors all
with brakes.
• Front profile/ rear splash height and profile to be match
adjoining cooking battery.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
mm
ACCESSORIES:
Steel cover, Skewers, Jodi, Cushion.
SPECIAL NOTE:
All Sheet /Pipe S.S. 304 Grade Pre-polished Plastic Coated.
MUNNILAL
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 127 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-31
SPREADER TABLE
QUANTITY: 03
SIZE :
Width:
Depth:
Height:
400mm
900mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
•
•
•
EXHAUST
2.0mm thick S.S. Top.
150 mm high rear splash
Top and body secured to 12/25mm x 75mm x 25/12mm x 1.6 mm
Thick S.S. hat type welded channel frame work.
Four (4) no., 38mm x 38mm x 1.6mm thick S.S. square pipe legs
with S.S. adjustable bullet feet.
One (01) no. Sliding Drawer with Six (6) no 1/6 G.N pan .
1.2mm thick S.S. bottom shelf.
0.9mm thick S.S. cladding.
Front profile/ rear splash height and profile to be match
adjoining cooking battery.
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 128 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-32
SPREADER TABLE
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
450mm
900mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
•
•
•
EXHAUST
2.0mm thick S.S. Top.
150 mm high rear splash
Top and body secured to 12/25mm x 75mm x 25/12mm x 1.6 mm
Thick S.S. hat type welded channel frame work.
Four (4) no., 38mm x 38mm x 1.6mm thick S.S. square pipe legs
with S.S. adjustable bullet feet.
One (01) no. Sliding Drawer with Six (6) no 1/6 G.N pan.
1.2mm thick S.S. bottom shelf.
0.9mm thick S.S. cladding.
Front profile/ rear splash height and profile to be match
adjoining cooking battery.
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 129 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-33
GRIDDLE PLATE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
900 mm
900 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
80000
Con.
∅
¾”
SPECIFICATIONS
• smooth plate
• Equipment to Operate on LPG Gas.
• Freestanding Fry top.
• 150 mm high Rear splash.
• Cooking Surface of 764 W X640 D
• Splash Back in Stainless steel grids on three sides.
• Inner and outer Body AISI 306 Stainless steel
• 1.2mm thick S.S. bottom shelf.
• 0.9mm thick S.S. cladding.
• S.S. Legs with S.S. adjustable feet.
• Lateral drain channel for cleaning.
• Piezo ignition.
• Flame failure device.
• Fat collecting container.
ACCESSORIES:
Scrapper with brush; Splash guard
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing
with plan, elevation and section to be submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 130 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-34
EXHAUST HOOD WITH UV GREASE
REMOVAL COMPLETE WITH DEMAND
CONTROL VENTILATION & FIRE
SUPRESSION SYSTEM
QUANTITY: 01
SIZE
Width
Depth
Height:
5100mm
2800mm
555mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅ NA
Wast
e
∅ NA
SPECIFICATIONS
•
•
ELECTRIC :
Power
0.5 K.W (for
light)
Voltage
220v-50c-1p
EXHAUST
•
10,100 CFM
GAS:
BTU
NA
Con.
∅
KIT. EQPT. SPECS
INDIA
UAE
•
•
•
•
The kitchen canopy shall be constructed from 1.0 mm
AISI 304 stainless steel and shall be supplied complete
with grease filters (UL listed), pressure measurement
taps, exhaust adjustment systems. The canopy shall
be HACCP certified.
The system to include lightweight stainless steel UV
lamps cassettes, directly integrated in the exhaust
plenum, behind the double stage mechanical filtration.
Cassettes should be easily removable by disconnecting
the electrical connectors.
Outer casing panels to be constructed from AISI 304
stainless steel in a brushed satin finish, in a modular
Construction. The joints of the lower edge shall be
fully welded to be liquid-tight, avoiding harmful
dripping of condensation. All exposed welds should be
ground and polished to the metal’s original finish.
The bottom edge of the exhaust plenum should be
aerodynamically designed (no flat surface).
Canopy ends shall be of double-sidewall construction.
Exhaust
The exhaust air flow will be based on the convective
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 131 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
•
•
•
•
•
KIT. EQPT. SPECS
INDIA
UAE
heat generated by the appliances under each canopy.
Submittal shall include convective heat calculations
based on the input power of the appliances served.
Grease filters
The canopy shall be equipped with a stainless steel
grease filter. The grease removal efficiency should be
95% for particles a diameter of 10 microns or larger.
The filter shall be NSF and UL classified. Baffle or slot
type grease filters shall not be used.
Exhaust Balancing dampers
Every spigot connections for extracted air shall be
supplied with an automated motorized balancing
damper. The damper shall automatically adjust
exhaust airflow based on direct pressure readings
from integral T.A.B test and balance port in the hood.
The Model ABD will have night time setback feature
which will automatically close the damper when the
exhaust system is shut down to prevent outside air
from migrating into the space. The Model ABD should
fail safe open on power interruption.
The damper outer casing shall be constructed of
continuously welded 1.2mm thick S.S.including the
balancing blades. Adjustment of the parallel dampers
(in open position) will be achieved by manually turning
the locking adjustment bracket until the desired
pressure reading is achieved.
Light Fixtures
Each canopy shall be provided with a LED light fixture
to provide approx. 500 lux at the cooking appliances
work surface. The light is protected with a stainless
steel hatch with plain milled finish, surrounded by a
tempered-glass light diffuser (the heat tolerance of the
glass shall be -40 to 300 °C).
Demand Control Ventilation
The system to come equipped with hood mounted
infrared cooking activity sensors capable of measuring
appliance surface temperatures. Infrared sensor will
read appliance surface temperature which will be
translated by the specific calculation algorithm for that
appliance and will respond proactively to any change
in cooking status. Infrared sensor and exhaust collar
mounted temperature sensor work in concert on
differential temperature reading back to the controller.
The system shall automatically control the speed of
the exhaust fan (and supply fan if applicable) based
on appliances status, cooking activities and exhaust air
temperatures. The system can be controlled with
either manual On/Off switch, a 24hrs automated
schedule with a manual override function, or the
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 132 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
hoods can be automatically regulated based on the
appliance status. The integrated PLC will analyze
signals from the cooking activity sensors, temperature
sensors and pressure transducers mounted in the
hood and then send a signal to the VFD(to be
provided by HVAC contractor) to adjust the exhaust
fan (and supply fan if applicable) speed to satisfy
current cooking load conditions, as well adjust the
automated balancing dampers accordingly. The
system can be monitored and controlled with an
internet connected PC from either a local or remote
location.
Fire Suppression system
Provide an automatic, water-assisted, wet chemical,
fire suppression System with provision of manual pull
station to be located in a path of egress at a maximum
height of 60 inches above the floor.Unit to be provided
with nozzles for equipment protection, plenum
protection and duct protection.Should provide 100%
protection as required by codes, standards, national,
state, and local requirements.Provide fusible links in
each exhaust duct cut-out and at a maximum gap of 2
feet (610mm) between them.Unit to be provided with
water inlet which would be connected to the fire pipe
line.Stainless steel pipe drops to be provided to the
discharge nozzles and plenum both. Discharge nozzles
should not exceed 610mm from each other.The
system, including all of its components, shall be UL
Standard 300/ ULC Standard ORD-C1254.6 Listed.
Automatic actuation shall be initiated by separation of
fusible links. Fusible link break temperature should be
as per the equipment below the same.
Distance of cylinder assembly & pull down points as
per lay out plan.
Unit should be complete of Gas shut off valve,
Disconnect system for Electrical equipment, Hood light
(incase of same is in a non fire rated enclosure,
Disconnect hvac system.
ACCESSORIES:
Standard accessories for installation, operations and
maintenance to be provided.
SAFETY NORMS:
UV access door closing and filters presence shall be
permanently controlled with maintenance free magnetic
proximity switches (automatic and immediate UV lamps
switch off).
• Each UV canopy section is equipped with a plug and play UV
module, integrated behind the light casing, ease of access
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 133 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
using the light hatch. Each UV module shall communicate with
a UV control panel, integrated in one of the canopy section.
The control panel displays warnings or
potential working defaults and shall be able to identify on
which canopy section where they occur and, if needed, which
ballast or lamps are concerned.
SPECIAL NOTE:
•
•
•
Fire suppression system should be installed by a certified vendor
and all testing and commissioning certificated needs to be
provided.
Minimum of five (05) years maintenance contract should be there
between the client and the fire suppression system vendor for
periodic maintenance inclusive cylinder and accessories as per fire
norms.
Detail provided in this specification in terms of number of Nozzles,
ducts cut outs , distance of unit etc. needs to be coordinated and
verified by Vendor. Any Deviation from above mention and
specification to be brought to the notice else it is expected that the
vendor in following complete specification as mentioned above.
HVAC Cutouts and fresh air cutouts to be coordinated with HVAC consultant. Shop drawing
with plan, elevation and section to be submitted for approval.
HALTON+ANSUL
UVI+
MARVEL+(P10+P10+P13)
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 134 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-36
CEILING HUNG 2 TIER SHELVES
QUANTITY: 01
SIZE
Width:
Depth:
Height:
4800mm
600mm
300mm
+1000mm
rod
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
1.2mm thick S.S. shelves.
All sides turned down 40mm & in 12mm , bottom of shelves to be
closed.
S.S. hanger rod size as per ceiling height.
25mm x 25mm S.S. pipe hanging support.
Mounting Height-1400mm A.F.F.
75mm high S.S. pipe rail at centre and both sides.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 135 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-37
GARBAGE CAN
QUANTITY: 03
SIZE
Width:
502 mm
Dia:
410 mm
CAPACITY
70 liters
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Height:
673 mm
SPECIFICATIONS
• Polyethylene Construction.
• With rust, dent, chip or peel free.
• Heavy duty Pedal Mechanism.
• Tight fitting overlapping lid.
• With Round Corner.
• 70 Liter Container Equipped with 2 full plastic Rear Wheels for
better maneuverability.
• Unit should be suitable for work in Food service area.
• Color and qty As Per operator.
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Color and qty As Per operator.
PROBBAX
S0-1271
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 136 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-38
UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
1865mm
660 mm
800 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.45 K.W.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Equipment mounted below S.S. top.
304 S/S interior and exterior
0.9mm thick S.S. at back and base
Three (03) no. door with handle
Door opening as per GN. 1/1 pan.
Door activated lights
Six (06) no. PE coated shelves
Ambient temperature 43 deg C.
Internal Temp +1 Deg C to +4 Deg C.
Air-cooled.
REFRIGERANT GAS: R-134 A
Compressor unit location as per lay out plan..
Removable Cassette type condensing unit
Rounded edge for internal chamber
Automatic defrost
Anti condensation heaters fitted to door mullions
Digital temperature controller with compressor running
indicator, defrost indicator, condensing cleaning light, fan
running indicator, high low temperature alarm.
Six (06) nos. legs with bullet feet.
ACCESSORIES:
SPECIAL NOTE:
FOSTER
WILLIAMS
IGLU
PRO1/3 H
HO3U-DDDX
equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 137 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-39
UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
1865mm
660 mm
800 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.45 K.W.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Equipment mounted below S.S. top.
304 S/S interior and exterior
0.9mm thick S.S. at back and base
Three (03) no. door with handle
Door opening as per GN. 1/1 pan.
Door activated lights
Six (06) no. PE coated shelves
Ambient temperature 43 deg C.
Internal Temp +1 Deg C to +4 Deg C.
Air-cooled.
REFRIGERANT GAS: R-134 A
Compressor unit location as per lay out plan..
Removable Cassette type condensing unit
Rounded edge for internal chamber
Automatic defrost
Anti condensation heaters fitted to door mullions
Digital temperature controller with compressor running
indicator, defrost indicator, condensing cleaning light, fan
running indicator, high low temperature alarm.
Six (06) nos. legs with bullet feet.
ACCESSORIES:
SPECIAL NOTE:
FOASTER
WILLIAMS
IGLU
PRO1/3 H
HO3U-XDDD
equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 138 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-40
WORK TABLE WITH SINK & UNDER SPACE
FOR UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
4800 mm
700 mm
865mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Waste
∅
2”
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
EXHAUST
NA
•
•
GAS:
BTU
NA
Con.
∅
NA
•
•
2.0mm thick S.S. Top.
150mm High Left splash.
Top secured to 12/25mm x 75mm x 25/12mm x 2.0 mm Thick S.S.
hat type welded channel frame work.
Ten (10) no. 38mm x 38mm x 1.2 mm thick S.S. square pipe. legs.
With adjustable bullet feet.
Left side of unit provided space for modular under counter
refrigerator.
As shown in plan top of unit provide One (1) no. 450mm x 450mm
x 200mm deep x 2.0mm thick S.S. sink, Sink Complete with
50mm dia lever handle operated waste outlet & rear connected
overflow.
0.9mm thick S.S Apron front of Sink.
25mm x 25mm x 1.6mm thick S.S. square pipe cross bracing
welded to legs at as shown.
Right side of sink provide parking space for mobile garbage can.
Provide balance right side balance space provide 1.2mm thick part
bottom shelf.
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 139 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-43
WORK TABLE WITH SINK & UNDER SPACE
FOR UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
4800 mm
700 mm
865mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Waste
∅
2”
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
EXHAUST
NA
•
•
GAS:
BTU
NA
Con.
∅
NA
•
•
2.0mm thick S.S. Top.
150mm High Right splash.
Top secured to 12/25mm x 75mm x 25/12mm x 2.0 mm Thick S.S.
hat type welded channel frame work.
Ten (10) no. 38mm x 38mm x 1.2 mm thick S.S. square pipe. legs.
With adjustable bullet feet.
Right side of unit provided space for modular under counter
refrigerator.
Left side As shown in plan top of unit provide One (1) no. 450mm
x 450mm x 200mm deep x 2.0mm thick S.S. sink, Sink Complete
with 50mm dia lever handle operated waste outlet & rear connected
overflow.
0.9mm thick S.S Apron front of Sink.
25mm x 25mm x 1.6mm thick S.S. square pipe cross bracing
welded to legs at as shown.
Right side of sink provide parking space for mobile garbage can.
Provide balance area as shown 1.2mm thick part bottom shelf..
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 140 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-45
SERVICE CONSOLE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
4800mm
200mm.
1250mm+Up
false ceiling
to
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
SPECIFICATIONS
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
Power
NA
•
•
Voltage
NA
ELECTRIC :
S.S 304 1.2 mm thick Construction.
Removable Panel.
Suitable to be mounted above floor.
Pre-piped for Water, Drainage, Electrical Services required as per
cooking battery.
Three section for water, Electrical and gas services
Removable panels
Gas:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with plan,
elevation and section to be submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 141 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-46
SPREADER TABLE
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
450mm
900mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
•
2.0mm thick S.S. Top.
150 mm high rear splash
Top and body secured to 12/25mm x 75mm x 25/12mm x 1.6 mm
Thick S.S. hat type welded channel frame work.
Four (4) no., 38mm x 38mm x 1.6mm thick S.S. square pipe legs
with S.S. adjustable bullet feet.
1.2mm thick S.S. bottom shelf.
Front profile/ rear splash height and profile to be match
adjoining cooking battery.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 142 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-47
SPREADER TABLE
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
450mm
900mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
•
•
•
EXHAUST
2.0mm thick S.S. Top.
150 mm high rear splash
Top and body secured to 12/25mm x 75mm x 25/12mm x 1.6 mm
Thick S.S. hat type welded channel frame work.
Four (4) no., 38mm x 38mm x 1.6mm thick S.S. square pipe legs
with S.S. adjustable bullet feet.
One (01) no. Sliding Drawer with Six (6) no 1/6 G.N pan .
1.2mm thick S.S. bottom shelf.
0.9mm thick S.S. cladding.
Front profile/ rear splash height and profile to be match
adjoining cooking battery.
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 143 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-48
FOUR BURNER RANGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
900 mm
900 mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
SPECIFICATIONS
• Equipment to Operate on gas.
• Four (4) Burners open top range.
• Rear splash guard.
• Piezo ignition.
• Flame failure device.
• Front Two (2) nos. H.P. Btu’s burner with separately pilot lamp In
build pressure Control regulator.
• Rear Two (2) nos. L.P. Btu’s burner with separately pilot lamp In
build pressure Control regulator.
• 2 CNS Sliding grids.
• 1.2mm thick S.S. bottom shelf.
• S.S. Legs with S.S. adjustable feet
GAS:
BTU
2,20,000
Con.
∅
¾”
ACCESSORIES:
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 144 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-49
SPREADER TABLE
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
750 mm
900mm
610mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
•
2.0mm thick S.S. Top.
150 mm Rear & left splash
Top and body secured to 12/25mm x 75mm x 25/12mm, 1.6 mm
Thick S.S. hat type welded channel frame work.
Four (4) no. , 38mm x 38mm x 1.6mm thick S.S. square pipe legs
with S.S. adjustable bullet feet.
1.2mm thick S.S. bottom shelf.
Front profile/ rear splash height and profile to be match
adjoining modular cooking battery.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 145 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-51
DEEP FAT FRYER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
800 mm
850 mm
900mm
CAPACITY
2 X 12.5 Liter
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.2 K.W.
Voltage
220v-50c-1p
EXHAUST
NA
SPECIFICATIONS
• Gas operated equipment.
• AISI 306 Constructions.
• Rear splash.
• Unit with 2 number of frying well tanks with capacity of 25.0
liters for well.
• Two No (2) Baskets.
• 2 Lids.
• 2 oil clarifying trays.
• Unit provided with deep cold zone to collect food debris.
• Under Storage cupboard with Front hinged doors.
• S.S. Legs with S.S. adjustable feet
• Piezo ignition.
• Flame failure device.
GAS:
BTU
146845
Con.
∅
3/4
"
ACCESSORIES:
Oil Filter for fryer; Oil receptacle
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 146 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-51A
SPREADER TABLE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
800mm
850 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• Free Standing.
• S.S. Construction AISI 306.
• Under storage cupboard.
• Rear splash.
• S.S. Legs with S.S. adjustable feet.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 147 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-52
GRIDDLE PLATE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
800+400mm
mm
850 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• 800mm smooth plate, 400mm rived plate
• Equipment to Operate on LPG Gas.
• Freestanding Fry top.
• Rear splash.
• Cooking Surface of 1164 W X640 D
• Splash Back in Stainless steel grids on three sides.
• Inner and outer Body AISI 306 Stainless steel
• S.S. Legs with S.S. adjustable feet.
• Under Storage cupboard with Front hinged doors.
• Lateral drain channel for cleaning.
• Piezo ignition.
• Flame failure device.
• Fat collecting container.
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
85033
Con.
∅
¾”
ACCESSORIES:
Scrapper with brush; Splash guard
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing
with plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 148 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-54
SIX BURNER RANGE WITH OVEN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1200 mm
850 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• Equipment to Operate on gas.
• Six (6) Burners open top range.
• Rear splash guard.
• Piezo ignition.
• Flame failure device.
• In build pressure Control regulator.
• 2 CNS Sliding grid.
• Below Gas operated oven
• Left storage cupboard.
• S.S. legs with S.S. feet.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
172116
Con.
∅
¾”
mm
ACCESSORIES:
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 149 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-55
SPREADER TABLE
QUANTITY: 02
SIZE
Width:
Depth:
Height:
400mm
850 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• Free Standing.
• S.S. Construction AISI 306.
• Under storage cupboard.
• Rear & wall side splash.
• S.S. Legs with S.S. adjustable feet.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 150 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-56
EXHAUST HOOD WITH UV GREASE
REMOVAL COMPLETE WITH DEMAND
CONTROL VENTILATION & FIRE
SUPRESSION SYSTEM
QUANTITY: 01
SIZE
Width
Depth
Height:
5100mm
2800mm
555mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅ NA
Wast
e
∅ NA
SPECIFICATIONS
•
•
ELECTRIC :
Power
0.5 K.W (for
light)
Voltage
220v-50c-1p
EXHAUST
•
8,515 CFM
GAS:
BTU
NA
Con.
∅
KIT. EQPT. SPECS
INDIA
UAE
•
•
•
•
The kitchen canopy shall be constructed from 1.0 mm
AISI 304 stainless steel and shall be supplied complete
with grease filters (UL listed), pressure measurement
taps, exhaust adjustment systems. The canopy shall
be HACCP certified.
The system to include lightweight stainless steel UV
lamps cassettes, directly integrated in the exhaust
plenum, behind the double stage mechanical filtration.
Cassettes should be easily removable by disconnecting
the electrical connectors.
Outer casing panels to be constructed from AISI 304
stainless steel in a brushed satin finish, in a modular
Construction. The joints of the lower edge shall be
fully welded to be liquid-tight, avoiding harmful
dripping of condensation. All exposed welds should be
ground and polished to the metal’s original finish.
The bottom edge of the exhaust plenum should be
aerodynamically designed (no flat surface).
Canopy ends shall be of double-sidewall construction.
Exhaust
The exhaust air flow will be based on the convective
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 151 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
•
•
•
•
•
KIT. EQPT. SPECS
INDIA
UAE
heat generated by the appliances under each canopy.
Submittal shall include convective heat calculations
based on the input power of the appliances served.
Grease filters
The canopy shall be equipped with a stainless steel
grease filter. The grease removal efficiency should be
95% for particles a diameter of 10 microns or larger.
The filter shall be NSF and UL classified. Baffle or slot
type grease filters shall not be used.
Exhaust Balancing dampers
Every spigot connections for extracted air shall be
supplied with an automated motorized balancing
damper. The damper shall automatically adjust
exhaust airflow based on direct pressure readings
from integral T.A.B test and balance port in the hood.
The Model ABD will have night time setback feature
which will automatically close the damper when the
exhaust system is shut down to prevent outside air
from migrating into the space. The Model ABD should
fail safe open on power interruption.
The damper outer casing shall be constructed of
continuously welded 1.2mm thick S.S.including the
balancing blades. Adjustment of the parallel dampers
(in open position) will be achieved by manually turning
the locking adjustment bracket until the desired
pressure reading is achieved.
Light Fixtures
Each canopy shall be provided with a LED light fixture
to provide approx. 500 lux at the cooking appliances
work surface. The light is protected with a stainless
steel hatch with plain milled finish, surrounded by a
tempered-glass light diffuser (the heat tolerance of the
glass shall be -40 to 300 °C).
Demand Control Ventilation
The system to come equipped with hood mounted
infrared cooking activity sensors capable of measuring
appliance surface temperatures. Infrared sensor will
read appliance surface temperature which will be
translated by the specific calculation algorithm for that
appliance and will respond proactively to any change
in cooking status. Infrared sensor and exhaust collar
mounted temperature sensor work in concert on
differential temperature reading back to the controller.
The system shall automatically control the speed of
the exhaust fan (and supply fan if applicable) based
on appliances status, cooking activities and exhaust air
temperatures. The system can be controlled with
either manual On/Off switch, a 24hrs automated
schedule with a manual override function, or the
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 152 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
hoods can be automatically regulated based on the
appliance status. The integrated PLC will analyze
signals from the cooking activity sensors, temperature
sensors and pressure transducers mounted in the
hood and then send a signal to the VFD(to be
provided by HVAC contractor) to adjust the exhaust
fan (and supply fan if applicable) speed to satisfy
current cooking load conditions, as well adjust the
automated balancing dampers accordingly. The
system can be monitored and controlled with an
internet connected PC from either a local or remote
location.
Fire Suppression system
Provide an automatic, water-assisted, wet chemical,
fire suppression System with provision of manual pull
station to be located in a path of egress at a maximum
height of 60 inches above the floor.Unit to be provided
with nozzles for equipment protection, plenum
protection and duct protection.Should provide 100%
protection as required by codes, standards, national,
state, and local requirements.Provide fusible links in
each exhaust duct cut-out and at a maximum gap of 2
feet (610mm) between them.Unit to be provided with
water inlet which would be connected to the fire pipe
line.Stainless steel pipe drops to be provided to the
discharge nozzles and plenum both. Discharge nozzles
should not exceed 610mm from each other.The
system, including all of its components, shall be UL
Standard 300/ ULC Standard ORD-C1254.6 Listed.
Automatic actuation shall be initiated by separation of
fusible links. Fusible link break temperature should be
as per the equipment below the same.
Distance of cylinder assembly & pull down points as
per lay out plan.
Unit should be complete of Gas shut off valve,
Disconnect system for Electrical equipment, Hood light
(incase of same is in a non fire rated enclosure,
Disconnect hvac system.
ACCESSORIES:
Standard accessories for installation, operations and
maintenance to be provided.
SAFETY NORMS:
UV access door closing and filters presence shall be
permanently controlled with maintenance free magnetic
proximity switches (automatic and immediate UV lamps
switch off).
• Each UV canopy section is equipped with a plug and play UV
module, integrated behind the light casing, ease of access
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 153 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
using the light hatch. Each UV module shall communicate with
a UV control panel, integrated in one of the canopy section.
The control panel displays warnings or
potential working defaults and shall be able to identify on
which canopy section where they occur and, if needed, which
ballast or lamps are concerned.
SPECIAL NOTE:
•
•
•
Fire suppression system should be installed by a certified vendor
and all testing and commissioning certificated needs to be
provided.
Minimum of five (05) years maintenance contract should be there
between the client and the fire suppression system vendor for
periodic maintenance inclusive cylinder and accessories as per fire
norms.
Detail provided in this specification in terms of number of Nozzles,
ducts cut outs , distance of unit etc. needs to be coordinated and
verified by Vendor. Any Deviation from above mention and
specification to be brought to the notice else it is expected that the
vendor in following complete specification as mentioned above.
HVAC Cutouts and fresh air cutouts to be coordinated with HVAC consultant. Shop drawing
with plan, elevation and section to be submitted for approval.
HALTON+ANSUL
UVI+
MARVEL+(P10+P10+P13)
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 154 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-57
INSECT- O- CUTOR
QUANTITY: 05
SIZE
Width:
Depth:
Height:
625 mm
250 mm
175mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• Twin tubes
• Unit suitable for ceiling suspension or mounting on wall,
• A proven approach to killing flies, conveniently and hygienically
• Unit with plastic coated M.S. guards provided
• No fumes, no chemicals, no odours –
• enviro-friendly
ELECTRIC :
Power
0.25 K.W
Voltage
220v.50c.1p
Gas:
BTU
NA
Con.
∅
NA
•
ACCESSORIES:
Power cord, Complete with mounting arrangement.
SPECIAL NOTE:
PCIL
L-L (LOW LINE) PESTOFLASH
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 155 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-60
WORK TABLE W/SINK & UNDER SPACE
FOR UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
4450 mm
750 mm
865mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Waste
∅
2”
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
EXHAUST
•
NA
GAS:
BTU
NA
Con.
∅
•
NA
•
•
2.0mm thick S.S. Top.
150mm High rear and Left splash. (Left side of table top as
per site condition)
Top secured to 12/25mm x 75mm x 25/12mm x 2.0 mm
Thick S.S. hat type welded channel frame work.
Ten (10) no. 38mm x 38mm x 1.2 mm thick S.S. square pipe.
legs. With adjustable bullet feet.
Left side of unit provided space for modular under counter
refrigerator & as shown provide balance area 1.2mm thick
S.S. bottom and middle shelves.
Left side of sink provided space for mobile equipment
garbage can.
Right side of unit provide One (1) no. 450mm x 450mm x
200mm deep x 2.0mm thick S.S. sink, Sink Complete with
50mm dia lever handle operated waste outlet & rear
connected overflow.
0.9mm thick S.S Apron front & right of Sink.
25mm x 25mm x 1.6mm thick
S.S. square pipe cross
bracing welded to legs at as shown.
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 156 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-61
WALL SHELVES
QUANTITY: 02
SIZE
Width:
Depth:
Height:
4150mm
300 mm
200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
1.2 mm thick S.S. Wall shelves.
Rear & both sides turned up 50mm & Hemmed out side, Front
turned down 38mm & in 12mm.
Shelves secured to bracket with acorn S.S. nuts & bolts.
Five (05) no. 2.0 mm thick S.S. wall Brackets. Secured to top
with acorn Nuts & Bolts & Bracket secured to wall with anchor
fasteners.
Mounting Height- 1400mm A.F.F. and 1700 A.F.F.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 157 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-62
UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
1865mm
700 mm
800 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.45 K.W.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Equipment mounted below S.S. top.
304 S/S interior and exterior
0.9mm thick S.S. at back and base
Three (03) no. door with handle
Door opening as per GN. 1/1 pan.
Door activated lights
Six (06) no. PE coated shelves
Ambient temperature 43 deg C.
Internal Temp +1 Deg C to +4 Deg C.
Air-cooled.
REFRIGERANT GAS: R-134 A
Compressor unit on Right side to be provided.
Removable Cassette type condensing unit
Rounded edge for internal chamber
Automatic defrost
Anti condensation heaters fitted to door mullions
Digital temperature controller with compressor running
indicator, defrost indicator, condensing cleaning light, fan
running indicator, high low temperature alarm.
Six (06) nos. legs with bullet feet.
ACCESSORIES:
SPECIAL NOTE:
FOASTER
WILLIAMS
IGLU
PRO1/3 H
HO3U-DDDX
equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 158 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-64
STORE ROOM SHELVING- DAY STORE
QUANTITY: 08
SIZE
WIDTH:
DEPTH:
HEIGHT:
914MM-02
535 MM
2000 MM
1060MM-06
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
cold
∅
NA
hot
∅
NA
waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
GAS:
BTU
NA
CON.
∅
SPECIFICATIONS
• Corrosion Proof Polymer Mats With Natural Finish
• Total five (05) no. shelves..
• Polymer Mat With Exclusive Built In Antimicrobial Product
Protection
• S.S Uprights.
• Edge Reinforced Nylon.
• With Corner Hooks
• Hanging Rails
• Shelf Support.
• Maximum Load 600 Kg Per Field.
• Adjustable Shelves
• With Adjustable S.S Feet.
• Shelving To Be Installed As Continuous Length With Common
Uprights With Maximum Distance Of 1050 Mm.
ACCESSORIES:
SPECIAL NOTE:
Space saving common use of uprights between 2 shelving units
possible, depending upon site / space conditions. The sizes and
number can verify as per the final plan of the store.
CAMBRO
HUPFER
METRO
CAMSHELVING
NORM 12
METROMAXQ
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 159 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-66
FREEZER SHELVING
QUANTITY: 06
SIZE
WIDTH:
DEPTH:
HEIGHT:
1060MM
535 MM
1830 MM
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
cold
∅
NA
hot
∅
NA
waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
GAS:
BTU
NA
CON.
∅
SPECIFICATIONS
• Corrosion Proof Polymer Mats With Natural Finish
• Total five (05) no. shelves..
• Polymer Mat With Exclusive Built In Antimicrobial Product
Protection
• S.S Uprights.
• Edge Reinforced Nylon.
• With Corner Hooks
• Hanging Rails
• Shelf Support.
• Maximum Load 600 Kg Per Field.
• Adjustable Shelves
• With Adjustable S.S Feet.
• Shelving To Be Installed As Continuous Length With Common
Uprights With Maximum Distance Of 1050 Mm.
ACCESSORIES:
SPECIAL NOTE:
Space saving common use of uprights between 2 shelving units
possible, depending upon site / space conditions. The sizes and
number can verify as per the final plan of the store.
CAMBRO
HUPFER
METRO
CAMSHELVING
NORM 12
METROMAXQ
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 160 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-67
SLOT CHANNEL / DRAIN RAIL
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1100mm
250mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
Channels:
Material: 2mm. thick Stainless Steel Grade: 304 Pickle
Passivated. Levelling bolts to adjust height. Inclusive of foul air trap, silt
basket, drainage ring (O-ring)
Gully: Corrosion protected deep-drawn gully body stainless steel grade
304. Pickle Passivated. Gully body outer diameter is 178mm, with vertical
outlet size 110 mm diameters.
NA
Grating for Gully top: Anti-slip electro-polished stainless steel
grating,with load bar size 30mm X 2mm.Load Class L,
according to EN1253.
Gratings are made by arc-welding (not spot welding)
Side bottom Inlets :50mm Socketed Side inlet made of Pickle Passivated
Stainless Steel & EPDM seal for taking indirect waste from surrounding
kitchen equipment if any
Function
To drain heavy waste water via in-direct drainage from food service
equipment and kitchen floor.
Modular structure for gratings with smaller individual grating to fit the
size of the channel to avoid work injury from being too heavy to bulky to
handle
Slab Penetration: Requires 110mm dia waste drain connection. Requires floor cut-out and recess. Refer to
WPR drawings. Location/number of drain pipes from food service equipments to be
coordinated with MEP Consultant.
SAFETY NORMS:
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 161 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-68
HAND WASH SINK UNIT
QUANTITY: 01
SIZE
Width:
Depth:
384 mm
353 mm
CAPACITY
6 l/ min
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Wast
e
∅
1½”
ELECTRIC :
Power
NA
Voltage
NA
Height:
512 mm
SPECIFICATIONS
• Wall mounted knee-activated hand wash sink.
• S.S. construction.
• 240mm High Splash.
• Knee operated water faucet.
• Round pressed bowl.
• Depth of Wash Bowl: 150mm.
• With hot and cold water mixer.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
∅
ACCESSORIES:
•
Soap dispenser, Paper dispenser, S.S. Garbage
Bin
SPECIAL NOTE:
SOFINOR
LMASBD
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 162 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-69
POT WASH SINK UNIT
QUANTITY: 01
SIZE
Width:
Depth:
Height:
3250mm
800 mm
750mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
(2)½”
Hot
∅
(2)½”
Waste
∅
(3)2”
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
•
•
•
EXHAUST
•
NA
GAS:
BTU
NA
Con.
∅
•
NA
•
2.0 mm Thick S.S. Top.
250mm High Rear & right sides Splash. Front & left turned
up 25mm, returned 40mm, down 75mm & in 12mm.
Top secured to 12/25mm x 75mm x 25/12mm x 1.6 mm
Thick S.S. hat type welded channel frame work.
Right side of top provided One (1) no. 800mm x 600mm x
350mm deep, & Two (02) nos. 600 mm x 600 mm x 350
mm deep, 2.0mm thick. S.S. sinks, Sink Complete with
50mm dia lever handle operated waste outlet & rear
connected overflow.
Eight (08) no. 38mmx 38mm x 1.6mm thick. S.S. square
pipe legs. With adjustable bullet feet.
25mm x 25mm x 1.6mm thick S.S. pipe cross bracing
welded to legs at Rear & both sides.
0.9mm thick S.S Apron front of Sink.
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 163 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-69A
GARBAGE CAN
QUANTITY: 01
SIZE
Width:
502 mm
Dia:
410 mm
CAPACITY
70 liters
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Height:
673 mm
SPECIFICATIONS
• Polyethylene Construction.
• With rust, dent, chip or peel free.
• Heavy duty Pedal Mechanism.
• Tight fitting overlapping lid.
• With Round Corner.
• 70 Liter Container Equipped with 2 full plastic Rear Wheels for
better maneuverability.
• Unit should be suitable for work in Food service area.
• Color and qty As Per operator.
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Color and qty As Per operator.
PROBBAX
S0-1271
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 164 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-70
WALL MOUNTED PIPE SHELF
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1500mm
375 mm
245 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
Four (4) no. 25mm x 25mm X 16 ga. S. S. square pipe welded
construction.
75mm high splash/railing at rear & both sides.
S.S. pipe shelf welded to S.S. brackets.
Three (3) no. 2.0 mm thick S.S. wall Brackets. Secured to top
with acorn Nuts & Bolts & Bracket secured to wall with anchor
fasteners.
Mounting Height- 1500mm A.F.F.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 165 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-71
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1050mm
350mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 166 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-72
FLUSHING HOSE UNIT
QUANTITY: 01
SIZE
Width
Depth
Height
230 mm
538 mm
498 mm
CAPACITY
15 m hose reel.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
¾”
Hot
∅
¾”
Waste
∅
NA
ELECTRIC :
Power
Voltage
SPECIFICATIONS
• Heavy duty, cast bronze mixer body, suitable for mixing hot &
cold water.
• Furnished with steel enclosed braided Dunlop hose of 15 M
long with brass end nozzle at working end.
• Able to handle 300 PSI and high temperature
• Heavy duty S.S. Rod hose reel rack for winding hose when not
in use.
• Reel rack with stud bolts for anchoring to rear wall, unit
installed 25 mm away from wall, by inserting 25mm deep SS
bush sleeve on the stud bolts.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
FISHER
T&S
29602
5HR-242-01
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 167 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-73
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1500mm
1300mm
150 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 150mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 168 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-74
MOBILE POT RACK
QUANTITY: 07
SIZE
Width:
Depth:
Height:
1050mm
600 mm
1900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
Four (4) no. S.S. pipe shelves.
First shelf 300 A.F.F., Second 900 A.F.F. Third shelf 1375mm
A.F.F. & Fourth shelf at 1850mm A.F.F.
Shelf outer tube 32mm dia S.S. pipe with 25mm dia S.S pipe
welded to outer tube at 75 c/c.
Four (4) no. 38mm dia S.S. pipe upright on castor.
Four (4) no. 150mm dia Non marking rubberized castors two
with brakes.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 169 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-75
L-SHAPED SOILED DISH DROP OFF TABLE
WITH SINK, TABLE MOUNTED
RACK
SHELF & CHUTE
QUANTITY: 01
SIZE
Depth:
Height:
1050mm+750mm
865mm
Width:
30000mm+1200m
m
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
2”
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
•
NA
EXHAUST
NA
•
GAS:
BTU
NA
Con.
∅
•
NA
•
•
•
•
2.0 mm Thick S.S.
L- shaped top, profile as per lay out plan.
Front and rear sides turned up 75mm, returned 40mm, turned down
50mm & in 12mm.
250mm High splash Rear & sides against wall. Location as per plan.
Top secured 25mmx 100mm x 25mm x 1.6mm mm thick. S.S.
Channel frame work.
One (01) no. 550mm x 550mm x 300mm, 2.0mm thick. S.S. pre
wash sink, Sink Complete with 50mm dia lever handle operated
waste outlet & rear connected overflow.
One (1) no. 1.6 mm thick S.S. 50mm high Removable perforated
Strainer basket with handles. Size as per suit in sink
Ten (10) no. 38mmx 38mm x 1.2mm thick S.S. square pipe legs.
With adjustable bullet feet. (Rear side of drop off table legs as per
site low height masonry wall/drop-off opening.
25mm x 25mm x 1.2mm thick. S.S. pipe cross bracing welded to legs
at Front & both sides.
0.9mm thick S.S Apron front of Sink & S.S. trough.
One (01) no. 150mm dia x 100mm high garbage chute location as per
plan.
One (01) approx 3000mm long x 1.2mm thick table mounted rack
shelf
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 170 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-76
GARBAGE CAN
QUANTITY: 01
SIZE
Width:
502 mm
Dia:
410 mm
CAPACITY
70 liters
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Height:
673 mm
SPECIFICATIONS
• Polyethylene Construction.
• With rust, dent, chip or peel free.
• Heavy duty Pedal Mechanism.
• Tight fitting overlapping lid.
• With Round Corner.
• 70 Liter Container Equipped with 2 full plastic Rear Wheels for
better maneuverability.
• Unit should be suitable for work in Food service area.
• Color and qty As Per operator.
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Color and qty As Per operator.
PROBBAX
S0-1271
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 171 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-77
PRE- RINSE SPRAY UNIT WITH FAUCET
QUANTITY: 01
SIZE
Width:
315mm
Depth:
358mm
Height:
850mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
Hot
ᴓ
Waste ᴓ
ELECTRIC :
Power
Voltage
EXHAUST
NA
GAS:
BTU
Con.
½”
½”
NA
NA
NA
SPECIFICATIONS
•
•
•
•
•
NA
ᴓ NA
ACCESSORIES:
•
•
•
•
•
Easy Install Pre-Rinse, Spring Action, 8" Wall Mount Base,
Wall Bracket, & Swivel
8" wall mount mixing faucet with polished chrome plated
brass body,
18" riser,
44" flexible stainless steel hose with heat resistant handle
and swivel,
1.42 GPM spray valve, compression cartridges with spring
checks,
lever handles,
1/2" NPT female inlets,
6" adjustable wall bracket,
spray valve holder and overhead spring.
Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9
and NSF 372. EP Act 2005 compliant
Wall mounting bracket and finger hook
SPECIAL NOTE:
T&S
B-0133-B-SWV
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 172 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-78
CONVEYOR
TYPE
DISH
WASHING
MACHINE WITH DRYER AND CLEAN DISH
ROLLER
QUANTITY: 0!
SIZE
Width:
3395mm
with
Dryer+2100
Roller
CAPACITY
Depth:
860 mm
(DIN) 105 Racks/h
(max.) 142 Racks/h
M.E.P REQUIRMENT
PLUMBING :
Cold
NA
Hot
¾”
Waste
2”
ELECTRIC :
Power
55.5 KW
Voltage
400V-50Hz-3N
EXHAUST
Exhaust air volume approx.
110 m³/h
GAS:
BTU
NA
Con.
NA
KIT. EQPT. SPECS
INDIA
UAE
Height:
2415
mm
SPECIFICATIONS
• Rack type dishwashing machine
• Working direction: Right to Left operation
• Dryer above off loader.
• 1800mm long clean roller table
• Heating: Electric
• Fresh water final rinse: Soft - cold water
• Performance- (DIN SPEC 10534) Contact time 2 minutes
Transport speed - (DIN) 0,88 m/min
• Transport speed (max.) 1,18 m/min
• Motors Total 5,0kW
• Heating energies Total 50.5 Kw
• Total connected load : 55.50KW
• Consumption** Average consumption during typical
operation: 30,0 kW
• Electrical feeding cable Power supply 3N PE 400V 50Hz Max.
rated current 86,9 A
• Max. Elect. cable cross-section 35 mm²
• Fresh water Fresh water final rinse: soft cold 175 L/H water
Tank filling Soft - warm water 141L
• Regeneration water quantity 117 L/H
• Air outlet*** Waste air volume approx. 110 m³/h
• Waste air temperature approx. 38 °C
• Relative humidity approx. 90 %
• All electrical connections are executed as coded plugs
• Intelligent water level control
• M-iQ Filter for individual tank
• M-iQ Air Concept – No need for a direct exhaust
• M-iQ Energy concept - 3- stage heating energy
• M-iQ Blue Vision control software with CC- Touch glass
display
• Intelligent Self-cleaning programme
• Modular M-iQ Technology
• Three speed washing
• Suitable for rack size to be 500 mm X 500 mm.
• Door safety switch
• Emergency stop switch on clean dish side
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 173 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ACCESSORIES:
SPECIAL NOTE:
• Heater with thermostat Control.
• G-iO Tech ( Integrated reverse osmosis technology)
• Exhaust air heat recovery
Two (2) sets of strip curtains throughout machine, Molded standard
500mm X 500 mm size, plastic dish racks comprising of 20 Peg type
plate racks, Open pocket cutlery racks, 6 no, Power Cord with Plug.
Unit Should be as per Thermo-label and washing cycle as per DIN
Standard.
MEIKO
M-iQ K-S54 N02 P6
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 174 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-79
VAPOUR HOOD
QUANTITY: 01
SIZE
Width:
Depth:
Height:
3600mm
1200mm
600mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
1.2 mm thick S.S. welded body construction.
Height/exhaust Collar as per HVAC consultant.
M.S. hanger rod with turn buckles for hanging.
S.S. grease drawer with handle.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
1000 C.F.M
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 175 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-80
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1050mm
350mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 176 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-82
WALL MOUNTED RACK SHELF
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1600mm
550 mm
200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
1.2mm thick S.S. Wall Mounted shelf.
Front & both side turned up 75mm, returned 40mm & in 12mm,
Rear sides turned up 75mm & hemmed.
Shelves secured to bracket with acorn S.S. nuts & bolts.
(2) No. 2.0mm thick S.S. wall Brackets angular shape. Secured to
top with acorn Nuts & Bolts & Bracket secured to wall with
anchor fasteners.
12mm dia Bleeder tube at Left side.
Mounting Height- 1400mm A.F.F.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 177 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-83
MOBILE CLEAN DISH RACK
QUANTITY: 10
SIZE
Width:
Depth:
Height:
1050 mm
600 mm
1900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
Five 1.2 mm thick S.S. Shelves.
Front turned up 12mm @45 deg., Rear & both sides turned up
50mm & hemmed.
S.S. hat type reinforcement
38mm x 38mm x 1.6mm thick S. S. square pipe uprights on Non
marking rubberized castors.
S.S. shelves welded to S.S. square pipe uprights.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 178 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-84
FLUSHING HOSE UNIT
QUANTITY: 01
SIZE
Width
Depth
Height
230 mm
538 mm
498 mm
CAPACITY
15 m hose reel.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
¾”
Hot
∅
¾”
Waste
∅
NA
ELECTRIC :
Power
Voltage
SPECIFICATIONS
• Heavy duty, cast bronze mixer body, suitable for mixing hot &
cold water.
• Furnished with steel enclosed braided Dunlop hose of 15 M
long with brass end nozzle at working end.
• Able to handle 300 PSI and high temperature
• Heavy duty S.S. Rod hose reel rack for winding hose when not
in use.
• Reel rack with stud bolts for anchoring to rear wall, unit
installed 25 mm away from wall, by inserting 25mm deep SS
bush sleeve on the stud bolts.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
T&S
FISHER
5HR-242-01
29602
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 179 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-85
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
550mm
550mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 180 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-91
MODULAR BLAST CHILLER (REMOTE
COMPRESSOR)
QUANTITY: 01
SIZE:
Width:
Depth:
Height:
980mm
862 mm
2187 mm
CAPACITY
60kgs/90
(chilling)
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
Hot
∅
Waste
∅
ELECTRIC :
Power
3.8 K.W.
Voltage
440v-50c-3p
EXHAUST
Ilt and olt condenser water
GAS:
BTU
Con.
∅
ACCESSORIES:
minute
cycle
SPECIFICATIONS
• Finish: Stainless steel 304 interior/exterior
• Refrigerant: R404a
• Remote condensing unit.
• white laminate interior/exterior;
• WATER COOLED.
• Circular fan assisted cooling, ensuring uniform chilling whilst
protecting the food surface.
• Automatic defrost system.
• Touch electronic controller.
• Four simple pre-set programmes (soft chill, hard chill, hard chill
max and shock freeze). Pre-chill programme for start up.
• Timed and food temperature chilling options using the intelligent
probe system.
• Automatic hold function
• End of cycle alarm, over temperature alarm
• Door operated fan cut out switch.
• Self-closing door with durable steel hinges and 90° dwell
• Fully HACCP compliant with data downloading.
• Coved interior for ease of cleaning
• Internal bumper bars.
• Capacity: 1 x GN 1/1 trollies.
3 Probes, 2 GN pan trollies
SPECIAL NOTE:
ALTOSHAAM
FOSTER
IRINOX
QC-50 (Water cooled)
RBC 20-60 (water cooled)
MF-70.1(REMOTE)
cooled)
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
(water
Page- 181 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-92
ROLL IN COMBI OVEN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1075 mm
813 mm
1960 mm
CAPACITY
20 1/1 GN Pans.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ ½”,
¾”(purifie
d)
Hot
∅
NA
Waste
∅
1”
ELECTRIC :
Power
3 K.W
Voltage
440v-50c-3p
Gas:
BTU
1,36000
Con.
∅
¾”
ACCESSORIES:
mm
SPECIFICATIONS
• Gas operated.
• Stainless steel 304 throughout, with seamless joints in the cooking cell.
• manual controls.
• Height adjustable legs. 230 – 250 mm.
• Double thermo-glazed door equipped with drip pans to catch condensate.
• Should be able to provide variable steam from 10% to 95%
• Should be able to provide convection cooking, steam cooking and
combination of convection and steam heating
• Oven light with shock resistant glass cover.
• With motor brake system.
• With fan auto reverse.
• Oven light with shock-resistant glass cover
• Automatically Steam generator.
• Should be programmable.
• Access to main components from the front panel.
• Unit to have full, half speed and HOLD (pulse ventilation for baking and
low temperature cooking).
• Exhaust valve electronically controlled to extract the excess humidity.
• Able to set a time to delay the start of cooking programs or to program a
break between two cooking cycles
Automatic cleaning program, Core temperature sensor, Retractable hand shower, (2)
no. trolley (Suitable to interchange with Blast chiller & Mobile hot Food cart).
SPECIAL NOTE:
RATIONAL
SCC201G
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 182 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-92A
WATER FILTER FOR COMBI OVEN
QUANTITY: 01
SIZE
Width:
Depth:
15"
7"
Height:
18.75”
CAPACITY
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
TEMPERATURE:
80°F(27°C)
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
SPECIFICATIONS
• Sophisticated Hydro blend compound prevents lime scale
formation in high temperature steam applications.
• Fine filters incoming water to improve the performance,
maximize energy efficiency and increase the life of steam
equipment.
• Reduces chlorine-induced corrosion.
• Longer lasting SS-10 cartridge, AR-X HOUSING.
• Dip Tube for scalekleen delimer.
• (2) ScaleKleen 7oz Packets (CT System)
• NSF certified scale stick.
• Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
• KLEENSTEAM plate mounted system include 4CB5 Filter
Cartridge (ct system)
• Operating Weight is 15 lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
• WATER FROM KLEENSTEAM SYSTEM SHOULD ONLY
BE CONNECTED TO THE BOILER FEED AND NOT TO
THE CONDENSATE CONNECTION OF THE STEAMER.
10-125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE KLEENSTEAM CT
EV-979750
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 183 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-94
COMBI OVEN W/STAND
QUANTITY: 02
SIZE:
Width:
Depth:
Height:
932 mm
805 mm
1120 mm
CAPACITY
10 1/1 GN Pans
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”,
¾”
(Purified)
Hot
∅
NA
Waste
∅
2”
ELECTRIC :
Power
1.0 KW
Voltage
440v-50c-3p
EXHAUST
NA
GAS:
BTU
68500
Con.
∅
¾”
ACCESSORIES:
SPECIFICATIONS
• Gas operated.
• Stainless steel 304 throughout, with seamless joints in the cooking
cell.
• Height adjustable legs. 120 – 160 mm.
• Double thermo-glazed door equipped with drip pans to catch
condensate.
• In-Built Boiler.
• With fan auto reverse.
• Oven light with shock-resistant glass cover
• Automatically Steam generator.
• Should be programmable.
• Access to main components from the front panel.
• Unit to have full, half speed and HOLD (pulse ventilation for
baking and low temperature cooking).
• Exhaust valve electronically controlled to extract the excess
humidity.
• Able to set a time to delay the start of cooking programs or to
program a break between two cooking cycles
Automatic cleaning program, Core temperature sensor, Retractable hand
shower, S.S Stand with Castors and under tray storage.
SPECIAL NOTE:
RATIONAL
SCC101G
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 184 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-94A
WATER FILTER FOR COMBI OVEN
QUANTITY: 02
SIZE
Width:
Depth:
15"
7"
Height:
18.75”
CAPACITY
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
TEMPERATURE:
80°F(27°C)
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
SPECIFICATIONS
• Sophisticated Hydro blend compound prevents lime scale
formation in high temperature steam applications.
• Fine filters incoming water to improve the performance,
maximize energy efficiency and increase the life of steam
equipment.
• Reduces chlorine-induced corrosion.
• Longer lasting SS-10 cartridge, AR-X HOUSING.
• Dip Tube for scale kleen delimer.
• (2) Scale Kleen 7 oz Packets (CT System)
• NSF certified scale stick.
• Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
• KLEENSTEAM plate mounted system include 4CB5 Filter
Cartridge (ct system)
• Operating Weight is 15 lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
• WATER FROM KLEENSTEAM SYSTEM SHOULD ONLY
BE CONNECTED TO THE BOILER FEED AND NOT TO
THE CONDENSATE CONNECTION OF THE STEAMER.
10-125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE KLEENSTEAM CT
EV-979750
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 185 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-96
SERVICE CONSOLE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
4450mm
200 mm.
1250mm+Up
false ceiling
to
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
SPECIFICATIONS
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
Power
NA
•
•
Voltage
NA
ELECTRIC :
S.S 304 1.2 mm thick Construction.
Removable Panel.
Suitable to be mounted above floor.
Pre-piped for Water, Drainage, Electrical Services required as per
cooking battery.
Three section for water, Electrical and gas services
Removable panels
Gas:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with plan,
elevation and section to be submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 186 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-97
MOBILE WORK TABLE
QUANTITY: 03
SIZE
Width:
Depth:
Height:
1300mm
700 mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
2.0 mm Thick S.S. Top.
Top secured to 12/25mm x 75mm x 25/12mm # 1.6 mm Thick S.S.
hat type welded channel frame work.
38mm x 38mm x 1.6mm thick S.S. square pipe legs. On castor.
Full width 1.2 mm thick S.S. Bottom & intermediate shelves.
Four (4) no. 125mm Dia Non marking rubberized castors two (2)
with brakes.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 187 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-98
EXHAUST HOOD WITH UV GREASE
REMOVAL COMPLETE WITH DEMAND
CONTROL VENTILATION & FIRE
SUPRESSION SYSTEM
QUANTITY: 01
SIZE
Width
Depth
Height:
5500mm
1550mm
555mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅ NA
Wast
e
∅ NA
SPECIFICATIONS
•
•
ELECTRIC :
Power
0.5 K.W (for
light)
Voltage
220v-50c-1p
EXHAUST
•
3845 CFM
GAS:
BTU
NA
Con.
∅
KIT. EQPT. SPECS
INDIA
UAE
•
•
•
•
The kitchen canopy shall be constructed from 1.0 mm
AISI 304 stainless steel and shall be supplied complete
with grease filters (UL listed), pressure measurement
taps, exhaust adjustment systems. The canopy shall
be HACCP certified.
The system to include lightweight stainless steel UV
lamps cassettes, directly integrated in the exhaust
plenum, behind the double stage mechanical filtration.
Cassettes should be easily removable by disconnecting
the electrical connectors.
Outer casing panels to be constructed from AISI 304
stainless steel in a brushed satin finish, in a modular
Construction. The joints of the lower edge shall be
fully welded to be liquid-tight, avoiding harmful
dripping of condensation. All exposed welds should be
ground and polished to the metal’s original finish.
The bottom edge of the exhaust plenum should be
aerodynamically designed (no flat surface).
Canopy ends shall be of double-sidewall construction.
Exhaust
The exhaust air flow will be based on the convective
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 188 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
•
•
•
•
•
KIT. EQPT. SPECS
INDIA
UAE
heat generated by the appliances under each canopy.
Submittal shall include convective heat calculations
based on the input power of the appliances served.
Grease filters
The canopy shall be equipped with a stainless steel
grease filter. The grease removal efficiency should be
95% for particles a diameter of 10 microns or larger.
The filter shall be NSF and UL classified. Baffle or slot
type grease filters shall not be used.
Exhaust Balancing dampers
Every spigot connections for extracted air shall be
supplied with an automated motorized balancing
damper. The damper shall automatically adjust
exhaust airflow based on direct pressure readings
from integral T.A.B test and balance port in the hood.
The Model ABD will have night time setback feature
which will automatically close the damper when the
exhaust system is shut down to prevent outside air
from migrating into the space. The Model ABD should
fail safe open on power interruption.
The damper outer casing shall be constructed of
continuously welded 1.2mm thick S.S.including the
balancing blades. Adjustment of the parallel dampers
(in open position) will be achieved by manually turning
the locking adjustment bracket until the desired
pressure reading is achieved.
Light Fixtures
Each canopy shall be provided with a LED light fixture
to provide approx. 500 lux at the cooking appliances
work surface. The light is protected with a stainless
steel hatch with plain milled finish, surrounded by a
tempered-glass light diffuser (the heat tolerance of the
glass shall be -40 to 300 °C).
Demand Control Ventilation
The system to come equipped with hood mounted
infrared cooking activity sensors capable of measuring
appliance surface temperatures. Infrared sensor will
read appliance surface temperature which will be
translated by the specific calculation algorithm for that
appliance and will respond proactively to any change
in cooking status. Infrared sensor and exhaust collar
mounted temperature sensor work in concert on
differential temperature reading back to the controller.
The system shall automatically control the speed of
the exhaust fan (and supply fan if applicable) based
on appliances status, cooking activities and exhaust air
temperatures. The system can be controlled with
either manual On/Off switch, a 24hrs automated
schedule with a manual override function, or the
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 189 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
hoods can be automatically regulated based on the
appliance status. The integrated PLC will analyze
signals from the cooking activity sensors, temperature
sensors and pressure transducers mounted in the
hood and then send a signal to the VFD(to be
provided by HVAC contractor) to adjust the exhaust
fan (and supply fan if applicable) speed to satisfy
current cooking load conditions, as well adjust the
automated balancing dampers accordingly. The
system can be monitored and controlled with an
internet connected PC from either a local or remote
location.
Fire Suppression system
Provide an automatic, water-assisted, wet chemical,
fire suppression System with provision of manual pull
station to be located in a path of egress at a maximum
height of 60 inches above the floor.Unit to be provided
with nozzles for equipment protection, plenum
protection and duct protection.Should provide 100%
protection as required by codes, standards, national,
state, and local requirements.Provide fusible links in
each exhaust duct cut-out and at a maximum gap of 2
feet (610mm) between them.Unit to be provided with
water inlet which would be connected to the fire pipe
line.Stainless steel pipe drops to be provided to the
discharge nozzles and plenum both. Discharge nozzles
should not exceed 610mm from each other.The
system, including all of its components, shall be UL
Standard 300/ ULC Standard ORD-C1254.6 Listed.
Automatic actuation shall be initiated by separation of
fusible links. Fusible link break temperature should be
as per the equipment below the same.
Distance of cylinder assembly & pull down points as
per lay out plan.
Unit should be complete of Gas shut off valve,
Disconnect system for Electrical equipment, Hood light
(incase of same is in a non fire rated enclosure,
Disconnect hvac system.
ACCESSORIES:
Standard accessories for installation, operations and
maintenance to be provided.
SAFETY NORMS:
UV access door closing and filters presence shall be
permanently controlled with maintenance free magnetic
proximity switches (automatic and immediate UV lamps
switch off).
• Each UV canopy section is equipped with a plug and play UV
module, integrated behind the light casing, ease of access
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 190 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
using the light hatch. Each UV module shall communicate with
a UV control panel, integrated in one of the canopy section.
The control panel displays warnings or
potential working defaults and shall be able to identify on
which canopy section where they occur and, if needed, which
ballast or lamps are concerned.
SPECIAL NOTE:
•
•
•
Fire suppression system should be installed by a certified vendor
and all testing and commissioning certificated needs to be
provided.
Minimum of five (05) years maintenance contract should be there
between the client and the fire suppression system vendor for
periodic maintenance inclusive cylinder and accessories as per fire
norms.
Detail provided in this specification in terms of number of Nozzles,
ducts cut outs , distance of unit etc. needs to be coordinated and
verified by Vendor. Any Deviation from above mention and
specification to be brought to the notice else it is expected that the
vendor in following complete specification as mentioned above.
HVAC Cutouts and fresh air cutouts to be coordinated with HVAC consultant. Shop drawing
with plan, elevation and section to be submitted for approval.
HALTON+ANSUL
UVI+ MARVEL+(P10+P10)
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 191 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-99
TILTING BRAT PAN
QUANTITY: 02
SIZE
Width:
1168 mm
Depth:
1038 mm
CAPACITY
152 Liter (40 Gallons)
M.E.P REQUIRMENT
PLUMBING :
∅
Cold
∅
Hot
Waste ∅
ELECTRIC :
Power
Voltage
EXHAUST
NA
GAS:
BTU
Con.
½”
NA
NA
0.2 KW
220v-50c-1p
126000
∅ 1”
ACCESSORIES:
Height:
997 mm
SPECIFICATIONS
• Gas operated.
• Auto motorized tilting mechanism.
• Spring assisted cover
• With condensate vent
• Top, front and side panels in AISI 304 stainless steel
• Pan with all edges rounded.
• Thermal insulation of the pan.
• With spark pilot ignition.
• Pilot on/off indicator.
• With temperature scale.
• With Power Tilting.
• Tilting interlocking to switch off burner when pan is tilted.
• With timer.
• With flame failure safety device.
Pan Support; Double pantry faucet; Pouring lip Strainer.
SPECIAL NOTE:
CLEVELAND
MARCKET FORGE
SGL-40-T1
40P-STGL
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 192 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-100
DRAIN TROUGH GRATING
QUANTITY: 02
SIZE
Width:
Depth:
Height:
1000mm
500mm
150 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 150 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 193 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-101
GAS FIRED TILTING KETTLE
QUANTITY: 02
SIZE
Width:
Depth:
Height:
1165 mm
925 mm
1000 mm
CAPACITY
150 Ltrs.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.25 KW
Voltage
220v-50c-1p
EXHAUST
NA
GAS:
BTU
140,000
Con.
∅
SPECIFICATIONS
• Gas operated.
• Auto motorized tilting mechanism.
• Internal frame and external panels are in AISI 304 stainless steel.
• AISI 316L stainless steel cooking vessel and double jacket.
• Safety thermostat.
• Thermal insulation around the kettle
• Low water cut off with indicator light.
• Water Sight Glass.
• Pressure relief valve.
• 100 % Safety gas shut off valve.
• On/OF indicator.
• With electronic ignition and monitoring.
• With temperature limiter.
• With Power Tilting.
• Tilting self locking for positive stop.
• With Temperature sensor.
1”
ACCESSORIES:
Spring assist cover HSC; Double pantry faucet; Graduated measuring strip;
Perforated strainer.
SPECIAL NOTE:
CLEVELAND
MARCKET FORGE
KGL-40-T
Equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 194 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-102
DRAIN TROUGH GRATING
QUANTITY: 02
SIZE
Width:
Depth:
Height:
1000mm
500mm
150 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 150 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 195 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-103
EXHAUST HOOD WITH UV GREASE
REMOVAL COMPLETE WITH DEMAND
CONTROL VENTILATION & FIRE
SUPRESSION SYSTEM
QUANTITY: 01
SIZE
Width
Depth
Height:
5100mm
1550mm
555mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅ NA
Wast
e
∅ NA
SPECIFICATIONS
•
•
ELECTRIC :
Power
0.5 K.W (for
light)
Voltage
220v-50c-1p
EXHAUST
•
3761 CFM
GAS:
BTU
NA
Con.
∅
KIT. EQPT. SPECS
INDIA
UAE
•
•
•
•
The kitchen canopy shall be constructed from 1.0 mm
AISI 304 stainless steel and shall be supplied complete
with grease filters (UL listed), pressure measurement
taps, exhaust adjustment systems. The canopy shall
be HACCP certified.
The system to include lightweight stainless steel UV
lamps cassettes, directly integrated in the exhaust
plenum, behind the double stage mechanical filtration.
Cassettes should be easily removable by disconnecting
the electrical connectors.
Outer casing panels to be constructed from AISI 304
stainless steel in a brushed satin finish, in a modular
Construction. The joints of the lower edge shall be
fully welded to be liquid-tight, avoiding harmful
dripping of condensation. All exposed welds should be
ground and polished to the metal’s original finish.
The bottom edge of the exhaust plenum should be
aerodynamically designed (no flat surface).
Canopy ends shall be of double-sidewall construction.
Exhaust
The exhaust air flow will be based on the convective
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 196 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
•
•
•
•
•
KIT. EQPT. SPECS
INDIA
UAE
heat generated by the appliances under each canopy.
Submittal shall include convective heat calculations
based on the input power of the appliances served.
Grease filters
The canopy shall be equipped with a stainless steel
grease filter. The grease removal efficiency should be
95% for particles a diameter of 10 microns or larger.
The filter shall be NSF and UL classified. Baffle or slot
type grease filters shall not be used.
Exhaust Balancing dampers
Every spigot connections for extracted air shall be
supplied with an automated motorized balancing
damper. The damper shall automatically adjust
exhaust airflow based on direct pressure readings
from integral T.A.B test and balance port in the hood.
The Model ABD will have night time setback feature
which will automatically close the damper when the
exhaust system is shut down to prevent outside air
from migrating into the space. The Model ABD should
fail safe open on power interruption.
The damper outer casing shall be constructed of
continuously welded 1.2mm thick S.S.including the
balancing blades. Adjustment of the parallel dampers
(in open position) will be achieved by manually turning
the locking adjustment bracket until the desired
pressure reading is achieved.
Light Fixtures
Each canopy shall be provided with a LED light fixture
to provide approx. 500 lux at the cooking appliances
work surface. The light is protected with a stainless
steel hatch with plain milled finish, surrounded by a
tempered-glass light diffuser (the heat tolerance of the
glass shall be -40 to 300 °C).
Demand Control Ventilation
The system to come equipped with hood mounted
infrared cooking activity sensors capable of measuring
appliance surface temperatures. Infrared sensor will
read appliance surface temperature which will be
translated by the specific calculation algorithm for that
appliance and will respond proactively to any change
in cooking status. Infrared sensor and exhaust collar
mounted temperature sensor work in concert on
differential temperature reading back to the controller.
The system shall automatically control the speed of
the exhaust fan (and supply fan if applicable) based
on appliances status, cooking activities and exhaust air
temperatures. The system can be controlled with
either manual On/Off switch, a 24hrs automated
schedule with a manual override function, or the
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 197 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
hoods can be automatically regulated based on the
appliance status. The integrated PLC will analyze
signals from the cooking activity sensors, temperature
sensors and pressure transducers mounted in the
hood and then send a signal to the VFD(to be
provided by HVAC contractor) to adjust the exhaust
fan (and supply fan if applicable) speed to satisfy
current cooking load conditions, as well adjust the
automated balancing dampers accordingly. The
system can be monitored and controlled with an
internet connected PC from either a local or remote
location.
Fire Suppression system
Provide an automatic, water-assisted, wet chemical,
fire suppression System with provision of manual pull
station to be located in a path of egress at a maximum
height of 60 inches above the floor.Unit to be provided
with nozzles for equipment protection, plenum
protection and duct protection.Should provide 100%
protection as required by codes, standards, national,
state, and local requirements.Provide fusible links in
each exhaust duct cut-out and at a maximum gap of 2
feet (610mm) between them.Unit to be provided with
water inlet which would be connected to the fire pipe
line.Stainless steel pipe drops to be provided to the
discharge nozzles and plenum both. Discharge nozzles
should not exceed 610mm from each other.The
system, including all of its components, shall be UL
Standard 300/ ULC Standard ORD-C1254.6 Listed.
Automatic actuation shall be initiated by separation of
fusible links. Fusible link break temperature should be
as per the equipment below the same.
Distance of cylinder assembly & pull down points as
per lay out plan.
Unit should be complete of Gas shut off valve,
Disconnect system for Electrical equipment, Hood light
(incase of same is in a non fire rated enclosure,
Disconnect hvac system.
ACCESSORIES:
Standard accessories for installation, operations and
maintenance to be provided.
SAFETY NORMS:
UV access door closing and filters presence shall be
permanently controlled with maintenance free magnetic
proximity switches (automatic and immediate UV lamps
switch off).
• Each UV canopy section is equipped with a plug and play UV
module, integrated behind the light casing, ease of access
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 198 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
using the light hatch. Each UV module shall communicate with
a UV control panel, integrated in one of the canopy section.
The control panel displays warnings or
potential working defaults and shall be able to identify on
which canopy section where they occur and, if needed, which
ballast or lamps are concerned.
SPECIAL NOTE:
•
•
•
Fire suppression system should be installed by a certified vendor
and all testing and commissioning certificated needs to be
provided.
Minimum of five (05) years maintenance contract should be there
between the client and the fire suppression system vendor for
periodic maintenance inclusive cylinder and accessories as per fire
norms.
Detail provided in this specification in terms of number of Nozzles,
ducts cut outs , distance of unit etc. needs to be coordinated and
verified by Vendor. Any Deviation from above mention and
specification to be brought to the notice else it is expected that the
vendor in following complete specification as mentioned above.
HVAC Cutouts and fresh air cutouts to be coordinated with HVAC consultant. Shop drawing
with plan, elevation and section to be submitted for approval.
HALTON+ANSUL
UVI+ MARVEL+(P7+P10)
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 199 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-110
SLOT CHANNEL / DRAIN RAIL
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1450mm
250mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
Channels:
Material: 2mm. thick Stainless Steel Grade: 304 Pickle
Passivated. Levelling bolts to adjust height. Inclusive of foul air trap, silt
basket, drainage ring (O-ring)
Gully: Corrosion protected deep-drawn gully body stainless steel grade
304. Pickle Passivated. Gully body outer diameter is 178mm, with vertical
outlet size 110 mm diameters.
NA
Grating for Gully top: Anti-slip electro-polished stainless steel
grating,with load bar size 30mm X 2mm.Load Class L,
according to EN1253.
Gratings are made by arc-welding (not spot welding)
Side bottom Inlets :50mm Socketed Side inlet made of Pickle Passivated
Stainless Steel & EPDM seal for taking indirect waste from surrounding
kitchen equipment if any
Function
To drain heavy waste water via in-direct drainage from food service
equipment and kitchen floor.
Modular structure for gratings with smaller individual grating to fit the
size of the channel to avoid work injury from being too heavy to bulky to
handle
Slab Penetration: Requires 110mm dia waste drain connection. Requires floor cut-out and recess. Refer to
WPR drawings. Location/number of drain pipes from food service equipments to be
coordinated with MEP Consultant.
SAFETY NORMS:
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 200 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-111
MOBILE G.N PAN TROLLEY
QUANTITY: 01
SIZE
Width:
Depth:
Height:
662 mm
734 mm
1645
CAPACITY
18 GN 2/1 or 36 GN 1/1
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
SPECIFICATIONS
• The shelf trolley consists of S/S 18/10 (AISI 304), U-profile guide
rails welded between the stable 25 x 25 mm square tubes (curved
W/out a recess). with a tip safety as well as push-through protection on
both sides for GN 2/1, 1/1 and 2/4.
• A 20 x 10 mm square tube welded in elevated at mid-height on both
front and back of the shelf trolley for additional stability.
• corrosion- resistant synthetic castors (4 steering castors, 2 of locking
brakes, castor diameter 125 mm
• Material:
S/s 18/10 (AISI 304),Polyamide (PA)
• Material thickness of the
• square tube:
1.5 mm
• Material thickness of the support rails:1.2 mm
• Load-bearing capacity - 200 kg
• Number of support - pairs: 18
• Capacity:
18 x GN 2/1 or36 x GN 1/1
• U-profile guide rails with tip safety and push-through protection on
both sides
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 201 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-112
REFER SHELVING
QUANTITY: 09
SIZE
WIDTH:
DEPTH:
HEIGHT:
914MM-05
535 MM
1830 MM
1060MM-04
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
cold
∅
NA
hot
∅
NA
waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
GAS:
BTU
NA
CON.
∅
SPECIFICATIONS
• Corrosion Proof Polymer Mats With Natural Finish
• Total five (05) no. shelves..
• Polymer Mat With Exclusive Built In Antimicrobial Product
Protection
• S.S Uprights.
• Edge Reinforced Nylon.
• With Corner Hooks
• Hanging Rails
• Shelf Support.
• Maximum Load 600 Kg Per Field.
• Adjustable Shelves
• With Adjustable S.S Feet.
• Shelving To Be Installed As Continuous Length With Common
Uprights With Maximum Distance Of 1050 Mm.
ACCESSORIES:
SPECIAL NOTE:
Space saving common use of uprights between 2 shelving units
possible, depending upon site / space conditions. The sizes and
number can verify as per the final plan of the store.
CAMBRO
HUPFER
METRO
CAMSHELVING
NORM 12
METROMAXQ
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 202 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-116
MOBILE HOT FOOD HOLDING CART
QUANTITY: 08
SIZE
WIDTH:
DEPTH:
HEIGHT:
659 MM
773 MM
1922 MM
CAPACITY
AS PER GN 2/1 PAN
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
3.0 K.W
Voltage
220v-50c-1p
EXHAUST
NA
SPECIFICATIONS
• Fully Insulated Hot Cabinet Keeps Prepared Foods At Serving
Temperatures.
• High Temperature Ceramic Magnetic Latches
• For "Easy Open"; Twist-Lock Catch Secures Door
• During Transport. Latches And Hinges Mounted Inboard.
• External And Internal Made In Aisi 304 Stainless Steel.
• Internal Parts To Be Removable And Rounded Corners.
• Full Size Glass Door With Gasket, 3 Fixed Positions And Heat
Reflecting Thermo Glass
• Interior Lightning In Cabinet
• Fan For Heat Distribution In Cabinet
• To Be Provided With A Tray For
• Combistat To Control Operation Of Cabinet
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
•
ALL ACCESSORIES
OPERATION,
KIT
REF.ELECTRONIC.
FOR INSTALLATION AND
HACCP
ADV.CONNECTION-
SPECIAL NOTE:
ALTO-SHAAM
HUPFER
REIBER
1200-UP
EQUIVLANT
EQUIVLANT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 203 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-117
MOBILE COLD FOOD HOLDING CART
QUANTITY: 03
SIZE
Width:
Depth:
Height:
673 mm
927 mm
1727 mm
CAPACITY
21 1/1 GN(65mM DEEP)
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.5 h.p.
Voltage
220v-50c-1p
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIFICATIONS
• Fully insulated mobile ChillTemp® refrigerated
• Cabinet
• Overload reset. R134a refrigerant for
• Environmental compatibility.
• Self-closing insulated door prevents temperature
• Loss. Magnetic door gaskets for proper seal. Field
• Reversible for flexibility.
• The whole interior cell is constructed of AISI 304 stainless steel
with round corners
• Bottom door gasket adjustable
• Designed to operate at ambient temperatures of up to 43ºC.
• Automatic defrost.
• When temperature exceeds critical limits it provided with an
acoustic and visual alarm.
• Controlled humidity
• Ventilated cooling
• Refrigerant R 134 A.
KIT HACCP ADV.CONNECTION-REF.ELECTRONIC
SPECIAL NOTE:
ALTO-SHAAM
HUPFER
REIBER
1000-MR
EQUIVLANT
EQUIVLANT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 204 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-121
HAND WASH SINK UNIT
QUANTITY: 01
SIZE
Width:
Depth:
384 mm
353 mm
CAPACITY
6 l/ min
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Wast
e
∅
1½”
ELECTRIC :
Power
NA
Voltage
NA
Height:
512 mm
SPECIFICATIONS
• Wall mounted knee-activated hand wash sink.
• S.S. construction.
• 240mm High Splash.
• Knee operated water faucet.
• Round pressed bowl.
• Depth of Wash Bowl: 150mm.
• With hot and cold water mixer.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
∅
ACCESSORIES:
•
Soap dispenser, Paper dispenser, S.S. Garbage
Bin
SPECIAL NOTE:
SOFINOR
LMASBD
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 205 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-122
QUANTITY: 01
SIZE
FLUSHING HOSE UNIT
Width
Depth
Height
230 mm
538 mm
498 mm
CAPACITY
15 m hose reel.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
¾”
Hot
∅
¾”
Waste
∅
NA
ELECTRIC :
Power
Voltage
SPECIFICATIONS
• Heavy duty, cast bronze mixer body, suitable for mixing hot &
cold water.
• Furnished with steel enclosed braided Dunlop hose of 15 M
long with brass end nozzle at working end.
• Able to handle 300 PSI and high temperature
• Heavy duty S.S. Rod hose reel rack for winding hose when not
in use.
• Reel rack with stud bolts for anchoring to rear wall, unit
installed 25 mm away from wall, by inserting 25mm deep SS
bush sleeve on the stud bolts.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
T&S
FISHER
5HR-242-01
29602
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 206 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-123
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
550mm
550mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 207 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-124
L-SHAPED SOILED DISH DROP OFF TABLE
WITH SINK TABLE MOUNTED RACK SHELF
& CHUTE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
2200mm+1850mm
1200mm+750m
m
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
2”
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
•
NA
EXHAUST
NA
•
GAS:
BTU
NA
Con.
∅
•
NA
•
•
•
•
2.0 mm Thick S.S.
L- shaped top, profile as per lay out plan.
Front and rear sides turned up 75mm, returned 40mm, turned down
50mm & in 12mm.
250mm High splash Rear & sides against wall. Location as per plan.
Top secured 25mmx 100mm x 25mm x 1.6mm mm thick. S.S.
Channel frame work.
One (01) no. 550mm x 550mm x 300mm, 2.0mm thick. S.S. pre
wash sink, Sink Complete with 50mm dia lever handle operated
waste outlet & rear connected overflow.
One (1) no. 1.6 mm thick S.S. 50mm high Removable perforated
Strainer basket with handles. Size as per suit in sink
Twelve (12) no. 38mmx 38mm x 1.2mm thick S.S. square pipe legs.
With adjustable bullet feet. (Rear side of drop off table legs as per
site low height masonry wall/drop-off opening.
25mm x 25mm x 1.2mm thick. S.S. pipe cross bracing welded to legs
at Front & both sides.
0.9mm thick S.S Apron front of Sink & S.S. trough.
One (01) no. 150mm dia x 100mm high garbage chute location as per
plan.
One (01) approx 2200mm long x 1.2mm thick table mounted rack
shelf
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 208 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-125
MOBILE CUTLERY SINK UNIT
QUANTITY: 01
SIZE
Width:
Depth:
Height:
610 mm
610 mm
610mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
EXHAUST
•
NA
2.0mm thick S.S. w/all sides channel shape.
535mm X 535mm X 305mm deep 1.6mm thick S.S. with all
corners coved 20mm radius , Complete with 38mm dia lever
handle operated waste outlet with Tail pipe extended at 50mm
A.F.F.
38mm x 38mm x 1.6mm thick S.S. pipe legs on castor.
(4) no. 102 mm dia Non marking rubberized castors two with
brakes.
25mm x 25mm x 1.6mm thick S.S. pipe cross bracing at rear &
both sides.
One (1) no. 1.6 mm thick S.S. 50mm high Removable perforated
Strainer basket with handles. Size as per suit in sink
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 209 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-126
GARBAGE CAN
QUANTITY: 01
SIZE
Width:
502 mm
Dia:
410 mm
CAPACITY
70 liters
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Height:
673 mm
SPECIFICATIONS
• Polyethylene Construction.
• With rust, dent, chip or peel free.
• Heavy duty Pedal Mechanism.
• Tight fitting overlapping lid.
• With Round Corner.
• 70 Liter Container Equipped with 2 full plastic Rear Wheels for
better maneuverability.
• Unit should be suitable for work in Food service area.
• Color and qty As Per operator.
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Color and qty As Per operator.
PROBBAX
S0-1271
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 210 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-127
PRE- RINSE SPRAY UNIT WITH FAUCET
QUANTITY: 01
SIZE
Width:
315mm
Depth:
358mm
Height:
850mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
Hot
ᴓ
Waste ᴓ
ELECTRIC :
Power
Voltage
EXHAUST
NA
GAS:
BTU
Con.
½”
½”
NA
NA
NA
SPECIFICATIONS
•
•
•
•
•
NA
ᴓ NA
ACCESSORIES:
•
•
•
•
•
Easy Install Pre-Rinse, Spring Action, 8" Wall Mount Base,
Wall Bracket, & Swivel
8" wall mount mixing faucet with polished chrome plated
brass body,
18" riser,
44" flexible stainless steel hose with heat resistant handle
and swivel,
1.42 GPM spray valve, compression cartridges with spring
checks,
lever handles,
1/2" NPT female inlets,
6" adjustable wall bracket,
spray valve holder and overhead spring.
Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9
and NSF 372. EP Act 2005 compliant
Wall mounting bracket and finger hook
SPECIAL NOTE:
T&S
B-0133-B-SWV
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 211 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-128
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1050mm
350mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 212 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-129
CONVEYOR
TYPE
DISH
WASHING
MACHINE
WITH DRYER, 90 deg. OFF
LOADER AND CLEAN DISH ROLLER
QUANTITY: 0!
SIZE
Width:
3395mm
with
Dryer+2100
Roller
CAPACITY
Depth:
860 mm
(DIN) 105 Racks/h
(max.) 142 Racks/h
M.E.P REQUIRMENT
PLUMBING :
Cold
NA
Hot
¾”
Waste
2”
ELECTRIC :
Power
55.5 KW
Voltage
400V-50Hz-3N
EXHAUST
Exhaust air volume approx.
110 m³/h
GAS:
BTU
NA
Con.
NA
KIT. EQPT. SPECS
INDIA
UAE
Height:
2415
mm
SPECIFICATIONS
• Rack type dishwashing machine
• Working direction: Left to Right
• 90 degree off loader
• Dryer above off loader.
• 2100mm long clean roller table
• Heating: Electric
• Fresh water final rinse: Soft - cold water
• Performance- (DIN SPEC 10534) Contact time 2 minutes
Transport speed - (DIN) 0,88 m/min
• Transport speed (max.) 1,18 m/min
• Motors Total 5,0kW
• Heating energies Total 50.5 Kw
• Total connected load : 55.50KW
• Consumption** Average consumption during typical
operation: 30,0 kW
• Electrical feeding cable Power supply 3N PE 400V 50Hz Max.
rated current 86,9 A
• Max. Elect. cable cross-section 35 mm²
• Fresh water Fresh water final rinse: soft cold 175 L/H water
Tank filling Soft - warm water 141L
• Regeneration water quantity 117 L/H
• Air outlet*** Waste air volume approx. 110 m³/h
• Waste air temperature approx. 38 °C
• Relative humidity approx. 90 %
• All electrical connections are executed as coded plugs
• Intelligent water level control
• M-iQ Filter for individual tank
• M-iQ Air Concept – No need for a direct exhaust
• M-iQ Energy concept - 3- stage heating energy
• M-iQ Blue Vision control software with CC- Touch glass
display
• Intelligent Self-cleaning programme
• Modular M-iQ Technology
• Three speed washing
• Suitable for rack size to be 500 mm X 500 mm.
• Door safety switch
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 213 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ACCESSORIES:
SPECIAL NOTE:
• Emergency stop switch on clean dish side
• Heater with thermostat Control.
• G-iO Tech ( Integrated reverse osmosis technology)
• Exhaust air heat recovery
Two (2) sets of strip curtains throughout machine, Molded standard
500mm X 500 mm size, plastic dish racks comprising of 20 Peg type
plate racks, Open pocket cutlery racks, 6 no, Power Cord with Plug.
Unit Should be as per Thermo-label and washing cycle as per DIN
Standard.
MEIKO
M-iQ K-S54 N02 P6
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 214 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-130
VAPOUR HOOD
QUANTITY: 01
SIZE
Width:
Depth:
Height:
3600mm
1200 mm
600mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
1.2 mm thick S.S. welded body construction.
Height/exhaust Collar as per HVAC consultant.
M.S. hanger rod with turn buckles for hanging.
S.S. grease drawer with handle.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
1000 C.F.M
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 215 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-133
WALL MOUNTED RACK SHELF
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1600mm
550 mm
200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
1.2mm thick S.S. Wall Mounted shelf.
Front & both side turned up 75mm, returned 40mm & in 12mm,
Rear sides turned up 75mm & hemmed.
Shelves secured to bracket with acorn S.S. nuts & bolts.
(2) No. 2.0mm thick S.S. wall Brackets angular shape. Secured to
top with acorn Nuts & Bolts & Bracket secured to wall with
anchor fasteners.
12mm dia Bleeder tube at Left side.
Mounting Height- 1400mm A.F.F.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 216 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-134
MOBILE CLEAN DISH RACK
QUANTITY: 06
SIZE
Width:
Depth:
Height:
1050 mm
600 mm
1900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
Five 1.2 mm thick S.S. Shelves.
Front turned up 12mm @45 deg., Rear & both sides turned up
50mm & hemmed.
S.S. hat type reinforcement
38mm x 38mm x 1.6mm thick S. S. square pipe uprights on Non
marking rubberized castors.
S.S. shelves welded to S.S. square pipe uprights.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 217 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-139
BEVERAGE TABLE W/SINK & TROUGH
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
2500mm
750 mm
865mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Waste
∅
2”
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
EXHAUST
NA
•
•
GAS:
BTU
NA
Con.
∅
•
NA
2.0 mm thick S.S. Top.
150mm High Rear Splash.
Top secured to 12/25mm x 75mm x 25/12mm x1.6 mm Thick S.S.
hat type welded channel frame work.
Left of unit One (1) no. 450mm x 450mm x 200mm deep x 1.6mm
thick S.S. sink, Sink Complete with 50mm dia lever handle
operated waste outlet & rear connected overflow.
Six (06) no. 38mm x 38mm x 1.6mm thick S.S. square pipe. legs.
With adjustable bullet feet.
25mm x 25mm x 1.6mm thick S.S. square pipe cross bracing
welded to legs at part rear & left sides. (Below sink Front open.
0.9mm thick S.S Apron front & left of Sink.
Right side of sink provide balance space for 1.2mm thick part
bottom and middle shelf to be provided.
Top of unit approx 1350mm x 100mm x 25mm S.S. trough with
perforated cover to be provided. Trough drain to be connected
waste outlet of sink.
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 218 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-140
COFFEE MACHINE W/GRINDER
QUANTITY: 01
SIZE
Width:
450
mm
+
225
Depth:
Height:
680 mm
600 mm
300 cups per hour
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
3/8”
(Purified)
Hot
∅
NA
Waste
∅
1”
ELECTRIC :
Power
5.2 KW
Voltage
440v-50c-3p
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
SPECIFICATIONS
• Fully automatic machine
• With single grinder.
• Machine with hourly production of.
• Coffee: 240 Cups,
• Espresso: 300 cups,
• Café crème: 220 cups ,
• Cappuccino: 220 cups,
• Hot water: 20 liters.
• Machine with auto cleaning mechanism.
• Separate hot water and steam outlets.
• Integrated milk frother.
• Metal brewing unit with constant piston heater.
• Stainless steel tanks for coffee, hot water & steam.
• Low-noise precision grinder with direct grinding.
• See through Coffee bean container of 1.5 kg capacity.
• Manual filling funnel for ground coffee.
• Adjustable coffee dispenser from 80 to 150 mm.
NA
ACCESSORIES:
Refrigeration Milk unit, Cup warmer
SPECIAL NOTE:
Outer Finish to be co-ordinate with Operator
FRANKIE
SWISS AGRO
WMF
SINFONIA (M 1 M HD CF2).
7025P-SHELF
2000 S
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 219 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-140A
CLARIS HEAD & CARTRIDGE M
COFFEE MACHINE WITH GRINDER
FOR
QUANTITY: 01
SIZE
Width:
Depth:
Height:
3.31”
4.68”
5.78”
CAPACITY
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
TEMPERATURE:
39 - 86°F(4-30°C)
SERVICE FLOW RATE:
MAX. 0.5 GPM
PRESSURE
REQUIREMENTS:
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Built in Flush Port.
Auto shut-off.
Adjustable by-pass.
Flow restrictor.
Backflow restrictor.
CLARIS CARTRIDGE MEDIUM SIZE TO BE INSTALLED.
H: 15.43” AND W: 3.74”
MICRON RATING:- 5.00
Features include:Chlorine reduction
Ion exchange
Particulate reduction
Prefiltration
Scale control
Taste & odor
Water softening/Conditioning.
DO NOT USE TREAT CONDENSATE COOLING WATER.
29-116 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE CLARIS HEAD
EV-4339-21 & EV-4339-11
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 220 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-141
MILK WARMER
QUANTITY: 01
SIZE
Dia:
Depth:
Height:
210 mm
--
423 mm
CAPACITY
Holding capacity 5 Liter.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
1.8 KW
Voltage
220v-50c-1p
SPECIFICATIONS
• Electrically operated
• Double jacketed urn with bain-marie heating method
• With no drip faucets.
• Complete with thermostat,
• S.S construction.
• Visible water level in Bain-Marie.
• Temperature Display.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
ANIMO
BRAVILOR BONAMAT
MWR 5N
HM-505
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 221 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-141A
WATER FILTER FOR MILK WARMER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
8.04”
5.25”
7.59”
CAPACITY
9000 GALLONS
(34069 liters)
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
SPECIFICATIONS
• NSF certified scale stick.
• Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
• Include built in water shut-off valve system.
• Built in water pressure gauge.
• Shipping Weight is 6lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
TEMPERATURE:
80°F(27°C)
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
10-125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE
QC71 SINGLE-MH2
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 222 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-142
WATER BOILER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
218 mm
459 mm
532 mm
CAPACITY
Holding capacity 4 liters.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
2.5 KW
Voltage
220v-50c-1p
SPECIFICATIONS
• Electrically operated.
• Automatic water filling.
• With no drip faucets.
• Complete with thermostat.
• S.S construction.
• Temperature indicator.
• Over temperature shut-off.
• Equipped with a de-scale indicator.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
ANIMO
BRAVILOR BONAMAT
WKT-D 5N VA
HWA 40
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 223 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-142A
WATER FILTER FOR WATER BOILER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
8.04”
5.25”
7.59”
CAPACITY
9000 GALLONS
(34069 liters)
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
SPECIFICATIONS
• NSF certified scale stick.
• Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
• Include built in water shut-off valve system.
• Built in water pressure gauge.
• Shipping Weight is 6lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
TEMPERATURE:
80°F(27°C)
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
10-125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE
QC71 SINGLE-MH2
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 224 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-143
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1050mm
350mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 225 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-144
WATER COOLER
QUANTITY: 01
SIZE
Width:
600 mm
Depth:
600mm
CAPACITY
120 lt
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ ¾”
(Purified)
Hot
∅ NA
Waste
∅
1”
ELECTRIC :
Power
0.5 H.P
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
Height:
As per cap.
SPECIFICATIONS
•
•
•
•
•
•
•
•
Full S.S Construction
AISI 304 SS exterior and interior
Freestanding
SS legs.
All S.S construction and finish.
Provided with Two (2) no. of faucet.
Refrigerant gas R-22 to be used.
S S drip pan.
NA
ACCESSORIES:
SPECIAL NOTE:
Power Cord with plug
BLUE STAR
EQUIVLANT
CAP-120 LTRS.
LOCAL MARKET EQUIPMENT BYCLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 226 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-144A
WATER FILTER FOR WATER COOLER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
8.04”
5.25”
7.59”
CAPACITY
9000 GALLONS
(34069 liters)
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
SPECIFICATIONS
• NSF certified scale stick.
• Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
• Include built in water shut-off valve system.
• Built in water pressure gauge.
• Shipping Weight is 6lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
TEMPERATURE:
80°F(27°C)
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
10-125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE
QC71 SINGLE-MH2
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 227 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-145
ICE CUBE MACHINE W/BIN
QUANTITY: 02
SIZE
Width:
Depth:
Height:
762 mm
863 mm
2019 mm
CAPACITY
467 kg per day
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
3/8”
(Purified)
Hot
∅
NA
Waste
∅
½”
¾”
and
ELECTRIC :
Power
2.25 HP
Voltage
220v-50c-1p
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
Air cooled.
Unit should be able to work in ambient temperature 43.3o C
Unit with automatic cleaning system.
Removable water distribution tube with no tools.
With cove corners.
Liquid refrigerant shut off valve.
Suction refrigerant shut off valve
Cleaning and with antimicrobial.
Programmable ice production.
Dice production size is 22.2 X 22.2 X 22.2.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
With Scoop , scoop holder and Ice Storage Bin
SPECIAL NOTE:
MANITOWOC
SCOTSMAN
SD-1202A
C1030MW-32A
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 228 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-145A
WATER FILTER FOR ICE CUBE MACHINE
WITH i20002 REPLACEMENT CARTRIDGE
QUANTITY: 02
SIZE
Width:
Depth:
Height:
8.04”
5.25”
7.59”
CAPACITY
9000 GALLONS
(34069ltrs)
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
TEMPERATURE:
35 - 100°F(2 - 38°C)
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
SPECIFICATIONS
• Sophisticated Hydro blend compound prevents lime scale
formation in high temperature steam applications.
• Fine filters incoming water to improve the performance,
maximize energy efficiency and increase the life of steam
equipment.
• New and improved Micro-pure ΙΙ media with AgION
antimicrobial protection.
• Self-contained scale inhibitor.
• Pre coat submicron technology
• NSF certified under NSF/ANSI Standards 42 and 53.
• Features include: Bacteriostatic, Cyst reduction, Particulate
reduction, Scale control.
• Micron rating is up to 0.50.
• Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
• Cartridge dimensions are 20.75”H & 3.25”Diameter.
• Shipping Weight is 6lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
10-125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE QC71 SINGLE HEAD
EV-927241 & EV-961222
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 229 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-146
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
2400mm
350mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 230 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-151
WORK TABLE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1100mm
700 mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
1.6 mm thick S.S. Top.
150mm High Rear and right Splash.
Top secured to 12/25mm x 75mm x 25/12mm x 1.6 mm Thick
S.S. hat type welded channel frame work.
Full width 1.2 mm thick S.S. Bottom & intermediate shelves.
Four (04) no. 38mm x 38mm x 1.6mm thick S.S. square pipe
legs. With adjustable bullet feet.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 231 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-152
WALL SHELVES
QUANTITY: 02
SIZE
Width:
Depth:
Height:
1100 mm
300 mm
200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
1.2 mm thick S.S. Wall shelves.
Rear & both sides turned up 50mm & Hemmed out side, Front
turned down 38mm & in 12mm.
Shelves secured to bracket with acorn S.S. nuts & bolts.
Four (04) no. 2.0 mm thick S.S. wall Brackets. Secured to top
with acorn Nuts & Bolts & Bracket secured to wall with anchor
fasteners.
Mounting Height- 1400mm A.F.F. and 1700 A.F.F.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 232 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-153
SANDWICH GRILLER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
335 mm
385 mm
220 mm
CAPACITY
Cooking area – 260 X 240
mm
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
2.0 KW
Voltage
220v-50c-1p
SPECIFICATIONS
• Electrical operated.
• Cast Iron Plate.
• With thermostat 0-300°C
• With juice tray
• With Heat resistant handles.
• On/off indicator.
• With a scraper.
• With automatic regulation of the heat of cooking.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
Electronic timer 3 minute.
SPECIAL NOTE:
ROLLER GRILL (FRANCE)
LINCAT
TOASTMASTER
SAVOYE
GG1R + SS1
A710PA
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 233 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-154
WORK TABLE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1800mm
700 mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
2.0 mm thick S.S. Top.
150mm High Rear and both Splash.
Top secured to 12/25mm x 75mm x 25/12mm x 1.6 mm Thick
S.S. hat type welded channel frame work.
Full width 1.2 mm thick S.S. Bottom & intermediate shelves.
Six (06) no. 38mm x 38mm x 1.6mm thick S.S. square pipe legs.
With adjustable bullet feet.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 234 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-156
MULTIPURPOSE JUICER (3 IN 1)
QUANTITY: 01
SIZE
Width:
Depth:
Height:
317 mm
490 mm
510 mm
CAPACITY
20 liter / hour
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
1.0 KW
Voltage
220v.50c.1p
•
With asynchronous Single phase, heavy duty and quiet
motor
Aluminum casting and stainless steel construction
Stainless steel bowl and filter grid rubber bowl
sustainer
Multipurpose combi machine: drink mixer Sirio, juicer
Apollo, blender Dragone.
Separate motors for each function.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
With power cord and plug, Accessories for Installation and operation.
SPECIAL NOTE:
SIRMAN
MULTIPLO 3S/L
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 235 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-157
SLICER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
675 mm
600 mm
609 mm
CAPACITY
Slice Thickness: Up to 25mm
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
½ HP
Voltage
220v-50c-1p
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
SPECIFICATIONS
• Removable Knife Capable.
• Automatic interlock.
• Carriage system interlocks.
• Sharpen Knife Indicator Light.
• Tilting, Removable Carriage System.
• Knife Sharpen Button.
• Home Start Position
• Top Mounted Borazon Stone Sharpener
• Close To Stop
• MICROBAN® Antimicrobial Product Protection
• Auto Shutoff
• Gauge Plate Interlock
• Anodized Aluminum Base
• Poly V-Belt Drive System
NA
ACCESSORIES:
Knife Removal Tool, Food Chute, Product Deflector, Heavy meat grip, 4"
Legs
SPECIAL NOTE:
HOBART
SIRMAN
2911
PALLADIO 350 AUTOMEC.
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 236 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-158
WORK TOP WITH UNDER COUNTER
REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
1865 mm
700 mm
865 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.45 KW
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1.6mm thick S.S. top.
150 mm high rear & right side splash
SS 304 interior and exterior.
Six (06) no. drawer with handle.
Ambient temperature 43 deg C.
Internal Temp 0 Deg C to 4 Deg C.
Air-cooled.
REFRIGERANT GAS: R-134 A.
Housing on Left side. Complete with Open able
Drawer type sliding Access.
Digital read out thermometer, cord with time delay
auto start.
Forced draft cooling.
50mm thick P.U. foam on all sides.
Drip tray with heating.(for condensate water
evaporation)
Six (06) nos. high adjustable legs.
ACCESSORIES:
SPECIAL NOTE:
FOSTER
WILLIAMS
IGLU
PRO 1/3 H DRAWER
HO3U-XNNN
equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 237 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-159
WALL MOUNTED STORAGE CABINET
QUANTITY: 01
SIZE
Width:
Depth:
Height:
2100mm
375 mm
700mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
1.2 mm thick S.S. welded body construction.
Full width 1.2 mm thick S.S. bottom & intermediate shelves
Four (04) no. 1.2 mm thick S.S. double pan Hinged door with
integral Handle & locking arrangement.
Mounting Height 1400mm A.F.F.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 238 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-160
SALADETTE UNIT
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
980 mm
375 mm
241 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.25 H.P.
Voltage
220v.50c.1p.
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
• Table top
• 304 S/S interior and exterior
• 304 S/S at back
• S.S. 304 steel at base
• With hinged lid
• Accommodates Eight (08) 1/61 GN Pans
• Fitted with thermometer
• Adjustable thermostat
• Designed for 43°C Ambient Temperature
• Internal Temp +1 Deg C to +4 Deg C
• Copper tube cooling
• REFRIGERANT GAS: R-134 A
• Condensing unit aside
• Rounded edge for internal chamber
• Manual defrost
• Fitted with thermometer
ACCESSORIES:
SPECIAL NOTE:
WILLIAMS
IGLU
TW 9
equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 239 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-163
SLOT TOASTER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
455 mm
220 mm
210 mm
CAPACITY
6 slots
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
2.6 KW
Voltage
220v-50c-1p
SPECIFICATIONS
• Electrical operated.
• Neon indicator lamp.
• Mix and match selector switch.
• Round edges corner.
• Timer with audible alarm.
• Option for Single sided toasting.
• With crump tray.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
LINCAT
ROWLETT RUTLAND.
LT6X
6-AT-171E
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 240 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-164
ICE CREAM CABINET
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1200mm
700 mm
865 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
SPECIFICATIONS
•
•
•
Cold
∅
NA
Hot
∅
NA
Waste
∅
1” IndirectWaste
ELECTRIC :
Power
0.5 H.P
Voltage
220v-50c-1p
EXHAUST
•
•
•
•
•
•
•
•
NA
GAS:
BTU
NA
Con.
∅
1.6 mm Thick S.S. Top.
150mm high rear splash.
Top and body secured to 12/25mm x 75mm x 25/12mm 1.6 mm
Thick S.S. hat type welded channel frame work. .
Exterior/interior 0.9 mm thick S.S. sheet.
50mm thick Puff Insulation.
Top mounted insulated Glass Sliding door with integral handle.
Front S.S. insulated door with handle.
One no. S.S. wire shelf
0.5 HP. Low tem. Kirloskar compressor. With front louvered
panel at right side.
Internal temp is -22 to -24 Deg Celsius.
Four (4) no. 38mm x 38mmx 1.6mm thick S.S. legs. With
adjustable bullet feet.
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 241 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-166
WORK TABLE W/SINK
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
1550mm
700 mm
865mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Waste
∅
2”
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
EXHAUST
•
NA
2.0 mm thick S.S. Top.
150mm High Rear and left Splash.
Top secured to 12/25mm x 75mm x 25/12mm x 1.6 mm Thick S.S.
hat type welded channel frame work.
Right side of unit One (1) no. 450mm x 450mm x200mm deep,
2.0mm thick S.S. sink, Sink Complete with 50mm dia lever handle
operated waste outlet & rear connected overflow.
Six (06) no. 38mm x 38mm x 1.2 mm thick S.S. square pipe Legs.
With adjustable bullet feet.
25mm x 25mm x 1.6mm thick S.S. square pipe cross bracing
welded to legs at Rear & both sides. Front open.
0.9mm thick S.S Apron front of Sink.
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 242 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-167
WALL SHELVES
QUANTITY: 02
SIZE
Width:
Depth:
Height:
2500 mm
300 mm
200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
1.2 mm thick S.S. Wall shelves.
Rear & both sides turned up 50mm & Hemmed out side, Front
turned down 38mm & in 12mm.
Shelves secured to bracket with acorn S.S. nuts & bolts.
2.0 mm thick S.S. wall Brackets. Secured to top with acorn Nuts
& Bolts & Bracket secured to wall with anchor fasteners.
Mounting Height- 1400mm a.f.f. and 1700 a.f.f.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 243 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-168
GARBAGE CAN
QUANTITY: 01
SIZE
Width:
502 mm
Dia:
410 mm
CAPACITY
70 liters
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Height:
673 mm
SPECIFICATIONS
• Polyethylene Construction.
• With rust, dent, chip or peel free.
• Heavy duty Pedal Mechanism.
• Tight fitting overlapping lid.
• With Round Corner.
• 70 Liter Container Equipped with 2 full plastic Rear Wheels for
better maneuverability.
• Unit should be suitable for work in Food service area.
• Color and qty As Per operator.
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Color and qty As Per operator.
PROBBAX
S0-1271
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 244 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-173
SLOT CHANNEL / DRAIN RAIL
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1450mm
250mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
Channels:
Material: 2mm. thick Stainless Steel Grade: 304 Pickle
Passivated. Levelling bolts to adjust height. Inclusive of foul air trap, silt
basket, drainage ring (O-ring)
Gully: Corrosion protected deep-drawn gully body stainless steel grade
304. Pickle Passivated. Gully body outer diameter is 178mm, with vertical
outlet size 110 mm diameters.
NA
Grating for Gully top: Anti-slip electro-polished stainless steel
grating,with load bar size 30mm X 2mm.Load Class L,
according to EN1253.
Gratings are made by arc-welding (not spot welding)
Side bottom Inlets :50mm Socketed Side inlet made of Pickle Passivated
Stainless Steel & EPDM seal for taking indirect waste from surrounding
kitchen equipment if any
Function
To drain heavy waste water via in-direct drainage from food service
equipment and kitchen floor.
Modular structure for gratings with smaller individual grating to fit the
size of the channel to avoid work injury from being too heavy to bulky to
handle
Slab Penetration: Requires 110mm dia waste drain connection. Requires floor cut-out and recess. Refer to
WPR drawings. Location/number of drain pipes from food service equipments to be
coordinated with MEP Consultant.
SAFETY NORMS:
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 245 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-174
REFER SHELVING
QUANTITY: 09
SIZE
WIDTH:
DEPTH:
HEIGHT:
914MM-07
535 MM
1830 MM
1060MM-02
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
cold
∅
NA
hot
∅
NA
waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
GAS:
BTU
NA
CON.
∅
SPECIFICATIONS
• Corrosion Proof Polymer Mats With Natural Finish
• Total five (05) no. shelves..
• Polymer Mat With Exclusive Built In Antimicrobial Product
Protection
• S.S Uprights.
• Edge Reinforced Nylon.
• With Corner Hooks
• Hanging Rails
• Shelf Support.
• Maximum Load 600 Kg Per Field.
• Adjustable Shelves
• With Adjustable S.S Feet.
• Shelving To Be Installed As Continuous Length With Common
Uprights With Maximum Distance Of 1050 Mm.
ACCESSORIES:
SPECIAL NOTE:
Space saving common use of uprights between 2 shelving units
possible, depending upon site / space conditions. The sizes and
number can verify as per the final plan of the store.
CAMBRO
HUPFER
METRO
CAMSHELVING
NORM 12
METROMAXQ
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 246 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-176
WORK TABLE W/SINK
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
3650mm
600 mm
865mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
ᴓ
½”
Hot
ᴓ
½”
Waste
ᴓ
2”
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
EXHAUST
NA
GAS:
BTU
NA
Con.
ᴓ
NA
•
•
•
•
2.0mm thick S.S. Top.
150mm High Rear & left Splash.
Top secured to 12/25mm x 75mm x 25/12mm x 1.6 mm
Thick S.S. hat type welded channel frame work.
Left of unit One (1) no. 400mm x 400mm x 200mm
deep, 2.0mm thick S.S. sink, Sink Complete with 50mm
dia lever handle operated waste outlet & rear connected
overflow.
Ten (10) no. 38mm x 38mm x 1.2 mm thick S.S. square
pipe. Legs with adjustable bullet feet.
Left side provide parking space mobile garbage can
0.9mm thick S.S Apron front & left of Sink.
As shown balance space provided 1.2mm thick bottom
and part middle shelf.
Right side of unit provide two (02) no. Utensil drawer
with handle.
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 247 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-177
WATER COOLER
QUANTITY: 01
SIZE
Width:
600 mm
Depth:
600mm
CAPACITY
120 lt
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ ¾”
(Purified)
Hot
∅ NA
Waste
∅
1”
ELECTRIC :
Power
0.5 H.P
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
Height:
As per cap.
SPECIFICATIONS
•
•
•
•
•
•
•
•
Full S.S Construction
AISI 304 SS exterior and interior
Freestanding
SS legs.
All S.S construction and finish.
Provided with Two (2) no. of faucet.
Refrigerant gas R-22 to be used.
S S drip pan.
NA
ACCESSORIES:
SPECIAL NOTE:
Power Cord with plug
BLUE STAR
EQUIVLANT
CAP-120 LTRS.
LOCAL MARKET EQUIPMENT BYCLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 248 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-177A
WATER FILTER FOR WATER COOLER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
8.04”
5.25”
7.59”
CAPACITY
9000 GALLONS
(34069 liters)
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
SPECIFICATIONS
• NSF certified scale stick.
• Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
• Include built in water shut-off valve system.
• Built in water pressure gauge.
• Shipping Weight is 6lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
TEMPERATURE:
80°F(27°C)
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
10-125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE
QC71 SINGLE-MH2
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 249 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-178
ICE CUBE MACHINE W/BIN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
762 mm
863 mm
2019 mm
CAPACITY
467 kg per day
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
3/8”
(Purified)
Hot
∅
NA
Waste
∅
½”
¾”
and
ELECTRIC :
Power
2.25 HP
Voltage
220v-50c-1p
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
Air cooled.
Unit should be able to work in ambient temperature 43.3o C
Unit with automatic cleaning system.
Removable water distribution tube with no tools.
With cove corners.
Liquid refrigerant shut off valve.
Suction refrigerant shut off valve
Cleaning and with antimicrobial.
Programmable ice production.
Dice production size is 22.2 X 22.2 X 22.2.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
With Scoop , scoop holder and Ice Storage Bin
SPECIAL NOTE:
MANITOWOC
SCOTSMAN
SD-1202A
C1030MW-32A
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 250 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-178A
WATER FILTER FOR ICE CUBE MACHINE
WITH i20002 REPLACEMENT CARTRIDGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
8.04”
5.25”
7.59”
CAPACITY
9000 GALLONS
(34069ltrs)
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
TEMPERATURE:
35 - 100°F(2 - 38°C)
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
SPECIFICATIONS
• Sophisticated Hydro blend compound prevents lime scale
formation in high temperature steam applications.
• Fine filters incoming water to improve the performance,
maximize energy efficiency and increase the life of steam
equipment.
• New and improved Micro-pure ΙΙ media with AgION
antimicrobial protection.
• Self-contained scale inhibitor.
• Pre coat submicron technology
• NSF certified under NSF/ANSI Standards 42 and 53.
• Features include: Bacteriostatic, Cyst reduction, Particulate
reduction, Scale control.
• Micron rating is up to 0.50.
• Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
• Cartridge dimensions are 20.75”H & 3.25”Diameter.
• Shipping Weight is 6lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
10-125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE QC71 SINGLE HEAD
EV-927241 & EV-961222
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 251 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-179
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1500mm
330mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 252 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-180
MOBILE ICE BIN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
590 mm
765 mm
740 mm
CAPACITY
45.5 KGS
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
Capacity 45.5 kg.
Polyethylene body
Double wall and deep insulation will hold ice for extended
periods.
Rust and corrosion-proof polymer construction.
Large rear wheels and front swivel casters.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Unit Exterior Color & finishing to be confirmed by Operator
CAMBRO
METRO
ICS100L
IC 125
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 253 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-183
HAND WASH SINK UNIT
QUANTITY: 01
SIZE
Width:
Depth:
384 mm
353 mm
CAPACITY
6 l/ min
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Wast
e
∅
1½”
ELECTRIC :
Power
NA
Voltage
NA
Height:
512 mm
SPECIFICATIONS
• Wall mounted knee-activated hand wash sink.
• S.S. construction.
• 240mm High Splash.
• Knee operated water faucet.
• Round pressed bowl.
• Depth of Wash Bowl: 150mm.
• With hot and cold water mixer.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
∅
ACCESSORIES:
•
Soap dispenser, Paper dispenser, S.S. Garbage
Bin
SPECIAL NOTE:
SOFINOR
LMASBD
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 254 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-184
WORK TABLE
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
1250mm
700 mm
865mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
ᴓ
NA
Hot
ᴓ
NA
Waste
ᴓ
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
2.0mm thick S.S. Top.
100mm High Rear & left Splash.
Top secured to 12/25mm x 75mm x 25/12mm x 1.6 mm
Thick S.S. hat type welded channel frame work.
Four (04) no. 38mm x 38mm x 1.2 mm thick S.S. square
pipe. Legs with adjustable bullet feet.
Full width 1.2mm thick bottom and middle shelf.
EXHAUST
NA
GAS:
BTU
NA
Con.
ᴓ
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 255 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-185
WALL SHELVES
QUANTITY: 02
SIZE
Width:
Depth:
Height:
1250 mm
300 mm
200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
NA
Hot
ᴓ
NA
Waste
ᴓ
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
1.2 mm thick S.S. Wall shelves.
Rear & both sides turned up 50mm & Hemmed outside, Front
turned down 38mm & in 12mm.
Shelves secured to bracket with acorn S.S. nuts & bolts.
2.0 mm thick S.S. wall Brackets. Secured to top with acorn Nuts
& Bolts & Bracket secured to wall with anchor fasteners.
Mounting Height- 1400mm a.f.f. and 1700 a.f.f.
EXHAUST
NA
GAS:
BTU
NA
Con.
ᴓ
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 256 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-186
GARBAGE CAN
QUANTITY: 01
SIZE
Width:
502 mm
Dia:
410 mm
CAPACITY
70 liters
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Height:
673 mm
SPECIFICATIONS
• Polyethylene Construction.
• With rust, dent, chip or peel free.
• Heavy duty Pedal Mechanism.
• Tight fitting overlapping lid.
• With Round Corner.
• 70 Liter Container Equipped with 2 full plastic Rear Wheels for
better maneuverability.
• Unit should be suitable for work in Food service area.
• Color and qty As Per operator.
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Color and qty As Per operator.
PROBBAX
S0-1271
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 257 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-187
UPRIGHT BOTTLE COOLER
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
645 mm
633 mm
1770
mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.35 k.w.
Voltage
220v.50c.1p.
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
• 304 S/S exterior and 304 BA MIRROR S/S interior
• S.S. at back and base
• Six S/S Perforated removable & adjustable shelves
• One double glazed Argon gas door (Left hinged)
• Bright low energy lighting, with on/off switch
• Ambient temperature 32 deg C.
• Internal Temp +4 Deg C to +10 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A
• Condensing unit at the bottom and back side
• Rounded edge for internal chamber
• waste heat recovery vaporizer
• Automatic defrost
• Anti condensation heaters fitted to door mullions
• Digital temperature controller with compressor
running indicator, defrost indicator, condensing
cleaning light, fan running indicator, high low
temperature alarm
ACCESSORIES:
SPECIAL NOTE:
WILLIAMS
IGLU
BC95SS
EQUIVLANT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 258 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-190
BLENDER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
205mm
230 mm
510 mm
CAPACITY
2.0 liters Jar
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
•
•
ELECTRIC :
Power
0.95 KW
Voltage
220V-50C-1P
To blend, crush, grind, etc.
2 litres durable polycarbonate decanter.
Variable speed appliance with pulse.
Maximum speed: 28.000 rpm.
Heavy duty wear-resistant base.
With acoustic cover.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
mm
1.5 Liter bowl, Unit Complete with All Standard Accessories, 2 Jars
SPECIAL NOTE:
SAMMIC
Equivalent
TB-2000
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 259 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-191
WORK
TABLE
W/SINK,
STATION & RACK SLIDES
COCKTAIL
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
3500 mm
700 mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Waste
∅
(2)2”
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
SPECIFICATIONS
• 1.6mm Thick S.S. Top.
• 100mm High Rear and Both sides Splash.
• Top secured to 12/25mm x 75mm x 25/12mm x1.6 mm Thick S.S.
hat type welded channel frame work.
• As shown in plan top of unit provide One (1) no. 450mm x
450mm x 200mm deep 1.6mm thick S.S. sink, Sink Complete
with 50mm dia lever handle operated waste outlet & rear
connected overflow.
• Eight (08) no. 38mmx 38mmx1.6mm S.S. square legs. with
adjustable bullet feet.
• Right side 25mm x 25mm x 1.6mm thick S.S. pipe cross bracing
at part rear &sides.
• Both sides of cocktail station provide two no. single compartment
vertical rows of 40 mm x 40 mm x 2.0 mm thick S.S. angle slides
Three (3) pairs with 520 mm clear gap between angle slides to
hold glass rack (rack by others
• As shown in plan provide cocktail station complete with Two no.
bottle holding plates, one (1) No. removable 1.2mm thick S.S. Ice
holding bin (non-insulated) with extended flanges on all sides of
size approx 400mm Wide x 350mm Deep x 300mm High,
supported at top, with coved corners, base perforated with 3mm
dia holes. Six (06) Nos. GN-1/9 size S.S coved die pressed food
pan inserts of 4” Deep with flush S.S lids w/ handles.
• Front of unit Approx 100mm long single speed rail.
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 260 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-193
SLOT CHANNEL / DRAIN RAIL
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1450mm
250mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
Channels:
Material: 2mm. thick Stainless Steel Grade: 304 Pickle
Passivated. Levelling bolts to adjust height. Inclusive of foul air trap, silt
basket, drainage ring (O-ring)
Gully: Corrosion protected deep-drawn gully body stainless steel grade
304. Pickle Passivated. Gully body outer diameter is 178mm, with vertical
outlet size 110 mm diameters.
NA
Grating for Gully top: Anti-slip electro-polished stainless steel
grating,with load bar size 30mm X 2mm.Load Class L,
according to EN1253.
Gratings are made by arc-welding (not spot welding)
Side bottom Inlets :50mm Socketed Side inlet made of Pickle Passivated
Stainless Steel & EPDM seal for taking indirect waste from surrounding
kitchen equipment if any
Function
To drain heavy waste water via in-direct drainage from food service
equipment and kitchen floor.
Modular structure for gratings with smaller individual grating to fit the
size of the channel to avoid work injury from being too heavy to bulky to
handle
Slab Penetration: Requires 110mm dia waste drain connection. Requires floor cut-out and recess. Refer to
WPR drawings. Location/number of drain pipes from food service equipments to be
coordinated with MEP Consultant.
SAFETY NORMS:
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 261 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BQ-194
REFER SHELVING
QUANTITY: 07
SIZE
WIDTH:
DEPTH:
HEIGHT:
914MM-05
535 MM
1830 MM
1060MM-02
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
cold
∅
NA
hot
∅
NA
waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
GAS:
BTU
NA
CON.
∅
SPECIFICATIONS
• Corrosion Proof Polymer Mats With Natural Finish
• Total five (05) no. shelves..
• Polymer Mat With Exclusive Built In Antimicrobial Product
Protection
• S.S Uprights.
• Edge Reinforced Nylon.
• With Corner Hooks
• Hanging Rails
• Shelf Support.
• Maximum Load 600 Kg Per Field.
• Adjustable Shelves
• With Adjustable S.S Feet.
• Shelving To Be Installed As Continuous Length With Common
Uprights With Maximum Distance Of 1050 Mm.
ACCESSORIES:
SPECIAL NOTE:
Space saving common use of uprights between 2 shelving units
possible, depending upon site / space conditions. The sizes and
number can verify as per the final plan of the store.
CAMBRO
HUPFER
METRO
CAMSHELVING
NORM 12
METROMAXQ
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 262 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-198
WORK TABLE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
2200mm
600 mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
NA
Hot
ᴓ
NA
Waste
ᴓ
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
2.0 mm thick S.S. Top.
150mm High Rear & both side Splash.
Top secured to 12/25mm x 75mm x 25/12mm x 1.6 mm Thick
S.S. hat type welded channel frame work.
Full width 1.2 mm thick S.S. Bottom & intermediate shelves.
Six (06) no. 38mm x 38mm x 1.6mm thick S.S. square pipe legs.
With adjustable bullet feet.
EXHAUST
NA
GAS:
BTU
NA
Con.
ᴓ
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 263 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BQ-199
WORK TABLE W/SINK
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
2200mm
700 mm
865mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
ᴓ
½”
Hot
ᴓ
½”
Waste
ᴓ
2”
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
•
•
EXHAUST
NA
GAS:
•
BTU
NA
Con.
ᴓ
2.0mm thick S.S. Top.
150mm High Rear and both Splash.
Top and body secured 38mm x 38mm x 3mm Thick S.S. welded
angle frame work.
Right side of unit provide One (1) no. 400mm x 400mm x 200mm
deep x 1.6mm thick S.S. sink, Sink Complete with 50mm dia lever
handle operated waste outlet & rear connected overflow.
Eight (08) no. 38mm x 38mm x 1.2 mm thick S.S. square pipe.
legs. With adjustable bullet feet.
0.9mm thick S.S Apron front of Sink.
Left side of sink provided parking space for mobile garbage can.
Left side of unit provide two (02) no. Utensil drawer with nadle &
locking arrangement.
Below drawer provide 1.2mm thick bottom shelf.
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 264 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: RS-02
WORK TABLE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1800mm
700 mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
2.0 mm thick S.S. Top.
150mm High Rear Splash.
Top secured to 12/25mm x 75mm x 25/12mm x 1.6 mm Thick
S.S. hat type welded channel frame work.
Full width 1.2 mm thick S.S. Bottom & intermediate shelves.
Six (06) no. 38mm x 38mm x 1.6mm thick S.S. square pipe legs.
With adjustable bullet feet.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 265 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: RS-03
BEVERAGE TABLE W/SINK & TROUGH
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
3000mm
700 mm
865mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Waste
∅
2”
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
EXHAUST
NA
•
•
GAS:
BTU
NA
Con.
∅
NA
•
2.0 mm thick S.S. Top.
150mm High Rear & both side Splash.
Top secured to 12/25mm x 75mm x 25/12mm x1.6 mm Thick S.S.
hat type welded channel frame work.
As shown in plan unit One (1) no. 500mm x 500mm x 200mm deep
x 1.6mm thick S.S. sink, Sink Complete with 50mm dia lever
handle operated waste outlet & rear connected overflow.
Eight (08) no. 38mm x 38mm x 1.6mm thick S.S. square pipe. legs.
With adjustable bullet feet.
Right side 25mm x 25mm x 1.6mm thick S.S. square pipe cross
bracing welded to legs at part rear & left sides. (Below sink front
open.
0.9mm thick S.S Apron front of Sink & trough.
Left side of sink provided balance space for 1.2mm thick part
bottom and middle shelf to be provided.
Left side top of unit approx 1450mm x 100mm x 25mm S.S. trough
with perforated cover to be provided. Trough drain to be connected
waste outlet of sink.
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 266 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : RS-04
WALL SHELF
QUANTITY: 01
SIZE
Width:
Depth:
Height:
3000 mm
300 mm
200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
1.2 mm thick S.S. Wall shelves.
Rear & both sides turned up 50mm & Hemmed outside, Front
turned down 38mm & in 12mm.
Shelves secured to bracket with acorn S.S. nuts & bolts.
Three (03) no. 2.0 mm thick S.S. wall Brackets. Secured to top
with acorn Nuts & Bolts & Bracket secured to wall with anchor
fasteners.
Mounting Height- 1700mm A.F.F.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 267 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : RS-05
MILK WARMER
QUANTITY: 01
SIZE
Dia:
Depth:
Height:
210 mm
--
423 mm
CAPACITY
Holding capacity 5 Liter.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
1.8 KW
Voltage
220v-50c-1p
SPECIFICATIONS
• Electrically operated
• Double jacketed urn with bain-marie heating method
• With no drip faucets.
• Complete with thermostat,
• S.S construction.
• Visible water level in Bain-Marie.
• Temperature Display.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
ANIMO
BRAVILOR BONAMAT
MWR 5N
HM-505
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 268 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : RS-05A
WATER FILTER FOR MILK WARMER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
8.04”
5.25”
7.59”
CAPACITY
9000 GALLONS
(34069 liters)
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
SPECIFICATIONS
• NSF certified scale stick.
• Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
• Include built in water shut-off valve system.
• Built in water pressure gauge.
• Shipping Weight is 6lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
TEMPERATURE:
80°F(27°C)
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
10-125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE
QC71 SINGLE-MH2
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 269 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: RS-06
WATER BOILER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
218 mm
459 mm
532 mm
CAPACITY
Holding capacity 4 liters.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
2.5 KW
Voltage
220v-50c-1p
SPECIFICATIONS
• Electrically operated.
• Automatic water filling.
• With no drip faucets.
• Complete with thermostat.
• S.S construction.
• Temperature indicator.
• Over temperature shut-off.
• Equipped with a de-scale indicator.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
ANIMO
BRAVILOR BONAMAT
WKT-D 5N VA
HWA 40
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 270 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : RS-06A
WATER FILTER FOR WATER BOILER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
8.04”
5.25”
7.59”
CAPACITY
9000 GALLONS
(34069 liters)
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
SPECIFICATIONS
• NSF certified scale stick.
• Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
• Include built in water shut-off valve system.
• Built in water pressure gauge.
• Shipping Weight is 6lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
TEMPERATURE:
80°F(27°C)
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
10-125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE
QC71 SINGLE-MH2
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 271 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: RS-09
COFFEE MACHINE WITH GRINDER
QUANTITY: 01
SIZE
Width:
325
mm
+
225
Depth:
Height:
680 mm
600 mm
120 cups per hour.
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
3/8”
(Purified)
Hot
∅
NA
Waste
∅
1”
ELECTRIC :
Power
3.5 KW
Voltage
440v-50c-3p
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
SPECIFICATIONS
• Fully automatic machine.
• With single grinder.
• Machine with hourly production of.
• Coffee: 120 Cups,
• Espresso: 180 cups,
• Café crème: 120 cups ,
• Cappuccino: 120 cups,
• Hot water: 20 liters.
• Machine with auto cleaning mechanism.
• Separate hot water and steam outlets.
• Integrated milk frother.
• Metal brewing unit with constant piston heater.
• Stainless steel tanks for coffee, hot water & steam.
• Low-noise precision grinder with direct grinding.
• See through Coffee bean container of 1.5 kg capacity.
• Manual filling funnel for ground coffee.
• Adjustable coffee dispenser from 80 to 150 mm.
ACCESSORIES:
Refrigeration Milk unit, Cup warmer
SPECIAL NOTE:
Outer Finish to be co-ordinate with Operator
FRANKIE
SWISS AGRO
WMF
EVOLUTION (E 1M HD CF).
ONE TOUCH TOP-MILK
BISTRO 03.8301.1001
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 272 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: RS-09A
CLARIS HEAD & CARTRIDGE M
COFFEE MACHINE WITH GRINDER
FOR
QUANTITY: 01
SIZE
Width:
Depth:
Height:
3.31”
4.68”
5.78”
CAPACITY
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
TEMPERATURE:
39 - 86°F(4-30°C)
SERVICE FLOW RATE:
MAX. 0.5 GPM
PRESSURE
REQUIREMENTS:
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Built in Flush Port.
Auto shut-off.
Adjustable by-pass.
Flow restrictor.
Backflow restrictor.
CLARIS CARTRIDGE MEDIUM SIZE TO BE INSTALLED.
H: 15.43” AND W: 3.74”
MICRON RATING:- 5.00
Features include:Chlorine reduction
Ion exchange
Particulate reduction
Prefiltration
Scale control
Taste & odor
Water softening/Conditioning.
DO NOT USE TREAT CONDENSATE COOLING WATER.
29-116 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE CLARIS HEAD
EV-4339-21 & EV-4339-11
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 273 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : RS-10
MICROWAVE OVEN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
550 mm
514 mm
362 mm
CAPACITY
34 LTRS
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
NA
Hot
ᴓ
NA
Waste
ᴓ
NA
ELECTRIC :
Power
1.8 K.W
Voltage
220v-50c-1p
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
Counter Top.
Inter & Exterior S.S Construction.
Digital display.
Countdown timer.
With Two Magnetron(s).
Programmable.
Removable airs filter with clean filter reminder.
See through door,
Pull handle door opening.
EXHAUST
NA
GAS:
BTU
NA
Con.
ᴓ
NA
ACCESSORIES:
Standard Accessories.
SPECIAL NOTE:
MENU-MASTER
MERRY-CHEF
DFS 18E
HD 1925
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 274 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : RS-11
UPRIGHT FREEZER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
700 mm
800 mm
1975 mm
CAPACITY
600 Liter
M.E.P REQUIRMENT
PLUMBING :
Cold
NA
Hot
NA
Waste
NA
ELECTRIC :
Power
0.6 KW
Voltage
220v-50c-1p
EXHAUST
NA
GAS:
BTU
NA
Con.
NA
ACCESSORIES:
SPECIFICATIONS
• AISI 304 SS exterior and interior
• Full AISI 304 SS back
• With hydrocarbon refrigerant
• Heavy duty castors with breaks
• Two half door (Left hinged)
• Internal temp is - 180 C to - 210 C).
• Ambient temperature of operation – 43 deg C.
• Hot gases defrost.
• Fuzzy logic controllers.
• Double dipped coils
• 60 mm high density insulation
• Heavy duty magnetic gasket
• Solid state fan cut out switch
• Rifled copper tubing
• Corrugated evaporator fins
• removable plug box and lid for easy service access
• LED temperature display
• Safety Alarm
• Removable shelves
• Three shelves of size 530 X 650
• Drip tray with heating
additional nylon coated shelf
SPECIAL NOTE:
FOSTER
WILLIAMS
IGLU
EPRO G600L
LG1T
equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 275 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : RS-12
UPRIGHT REFRIGERATOR
QUANTITY: 01
SIZE
Width:
Depth:
Height:
700 mm
800 mm
1975 mm
CAPACITY
600 Liter
M.E.P REQUIRMENT
PLUMBING :
Cold
NA
Hot
NA
Waste
NA
ELECTRIC :
Power
0.6 KW
Voltage
220v-50c-1p
EXHAUST
NA
GAS:
BTU
NA
Con.
NA
ACCESSORIES:
SPECIFICATIONS
• AISI 304 SS exterior and interior
• Full AISI 304 SS back
• With hydrocarbon refrigerant
• Heavy duty castors with breaks
• Two half door (Right hinged)
• Internal tem 0 to + 4 Deg Celsius.
• Ambient temperature of operation – 43 deg C.
• Hot gases defrost.
• Fuzzy logic controllers.
• Double dipped coils
• 60 mm high density insulation
• Heavy duty magnetic gasket
• Solid state fan cut out switch
• Rifled copper tubing
• Corrugated evaporator fins
• removable plug box and lid for easy service access
• LED temperature display
• Safety Alarm
• Removable shelves
• Three shelves of size 530 X 650
• Drip tray with heating
additional nylon coated shelf
SPECIAL NOTE:
FOSTER
WILLIAMS
IGLU
EPRO G600H
HG1T
equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 276 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : RS-14
MOBILE ROOM SERVICE TROLLEY
QUANTITY: 09
SIZE
Width:
Depth:
Height:
915 mm
965 mm
760 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
NA
Hot
ᴓ
NA
Waste
ᴓ
NA
•
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
•
S.S. frame
Folding table
A unique 25mm laminate table top for extra strength & stability
Table top color as per Operator
Secure food warmer cradles
Automatic locking wings eliminate the need for time
consuming & un-hygienic pull out rods
Foot release locking point
125mm dia precision non-marking rubber casters with break
EXHAUST
NA
GAS:
BTU
NA
Con.
ᴓ
ACCESSORIES:
NA
Unit Complete with All Standard Accessories.
SPECIAL NOTE:
I.H.S.
SICO
FRS3642
Equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 277 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : RS-15
HOT CASES
QUANTITY:18
SIZE
Width:
Depth:
Height:
410 mm
410 mm
530 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
NA
Hot
ᴓ
NA
Waste
ᴓ
NA
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
0.3 k.w.
Voltage
220v-50c-1p
Full S.S Construction
Just plug in and turn on the switch
Unit has its own built-in thermostat to keep the temperature at
the optimum level.
Adjustable shelves
AISI 304 SS exterior and interior.
EXHAUST
NA
GAS:
BTU
NA
Con.
ᴓ
ACCESSORIES:
NA
Unit Complete with All Standard Accessories, Power Cord with Plug.
SPECIAL NOTE:
SICO
4918-800
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 278 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: RS-16
RACK FOR HOT CASES
QUANTITY: 03
SIZE
Width:
Depth:
Height:
1020 mm
520 mm
2010 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
NA
Hot
ᴓ
NA
Waste
ᴓ
NA
SPECIFICATIONS
• AISI 304 SS exterior and interior
• Unit to hold Six(6) of Hot Case
• Steam caster cart.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
ᴓ
ACCESSORIES:
NA
Unit Complete with All Standard Accessories.
SPECIAL NOTE:
SICO
3909-200
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 279 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: RS-17
MOBILE ROOM SERVICE TRAY SET UP
RACK TROLLEY
QUANTITY: 03
SIZE
Width:
Depth:
Height:
525mm
700 mm
1700mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
EXHAUST
•
•
NA
Unit shall be Constructed As per Room service Tray
(AMERICAN /CONTINENTAL BREAK FAST TRAY)
Final tray to be confirmed with Operator.
40mm x 40mm x 16 Ga. S.S. square pipe welded
construction.
1.2 mm thick S.S. base channel shape.
32mm x 32mm S.S. angle for Tray supporting welded
to Outer square pipe frame, Approx 16 pairs, 75mm
c/c.
(4) no. 150mm Dia Non marking rubberized castors
two with brakes.
Rubber corner Bumper On all four sides.
25mm dia S.S. for Tray stopper at Rear.
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval
CUSTOM
BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 280 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : RS-18
STORE ROOM SHELVING- ROOM SERVICE
QUANTITY: 06
SIZE
WIDTH:
DEPTH:
HEIGHT:
914MM
535 MM
2000 MM
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
cold
∅
NA
hot
∅
NA
waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
GAS:
BTU
NA
CON.
∅
SPECIFICATIONS
• Corrosion Proof Polymer Mats With Natural Finish
• Total five (05) no. shelves..
• Polymer Mat With Exclusive Built In Antimicrobial Product
Protection
• S.S Uprights.
• Edge Reinforced Nylon.
• With Corner Hooks
• Hanging Rails
• Shelf Support.
• Maximum Load 600 Kg Per Field.
• Adjustable Shelves
• With Adjustable S.S Feet.
• Shelving To Be Installed As Continuous Length With Common
Uprights With Maximum Distance Of 1050 Mm.
ACCESSORIES:
SPECIAL NOTE:
Space saving common use of uprights between 2 shelving units
possible, depending upon site / space conditions. The sizes and
number can verify as per the final plan of the store.
CAMBRO
HUPFER
METRO
CAMSHELVING
NORM 12
METROMAXQ
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 281 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : RS-19
UPRIGHT BOTTLE COOLER
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
645 mm
633 mm
1770
mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.35 k.w.
Voltage
220v.50c.1p.
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
• 304 S/S exterior and 304 BA MIRROR S/S interior
• S.S. at back and base
• Six S/S Perforated removable & adjustable shelves
• One double glazed Argon gas door (Left hinged)
• Bright low energy lighting, with on/off switch
• Ambient temperature 32 deg C.
• Internal Temp +4 Deg C to +10 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A
• Condensing unit at the bottom and back side
• Rounded edge for internal chamber
• waste heat recovery vaporizer
• Automatic defrost
• Anti condensation heaters fitted to door mullions
• Digital temperature controller with compressor
running indicator, defrost indicator, condensing
cleaning light, fan running indicator, high low
temperature alarm
ACCESSORIES:
SPECIAL NOTE:
WILLIAMS
IGLU
BC95SS
EQUIVLANT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 282 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : RS-20
TRAY SET-UP TABLE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
3000mm
700 mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
2.0 mm thick S.S. Top.
150mm High Rear and Both sides Splash.
Top secured to 12/25mm x 75mm x 25/12mm x 2.0
mm Thick S.S. hat type welded channel frame work.
25mm x 25mm x 1.2mm thick. S.S. pipe cross bracing
welded to legs at center & both sides.
Six (06) no. 38mm x 38mm x 1.6mm thick S.S.
square pipe legs. With adjustable bullet feet.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 283 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : RS-21
WALL SHELVES
QUANTITY: 02
SIZE
Width:
Depth:
Height:
3000 mm
300 mm
200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
1.2 mm thick S.S. Wall shelves.
Rear & both sides turned up 50mm & Hemmed out side, Front
turned down 38mm & in 12mm.
Shelves secured to bracket with acorn S.S. nuts & bolts.
Four (04) no. 2.0 mm thick S.S. wall Brackets. Secured to top
with acorn Nuts & Bolts & Bracket secured to wall with anchor
fasteners.
Mounting Height- 1400mm a.f.f. and 1700 a.f.f.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 284 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : RS-22
TRAY SET-UP TABLE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
3600mm
900 mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
2.0 mm thick S.S. Top.
Without Splash.
Top secured to 12/25mm x 75mm x 25/12mm x 2.0
mm Thick S.S. hat type welded channel frame work.
25mm x 25mm x 1.2mm thick. S.S. pipe cross bracing
welded to legs at center & both sides.
Eight (08) no. 38mm x 38mm x 1.6mm thick S.S.
square pipe legs. With adjustable bullet feet.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 285 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-01
DROP IN HAND WASH SINK
QUANTITY: 01
Tentative Image
SIZE
Width
Depth:
Height:
385mm
385mm
180mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Wast
e
∅
1½”
ELECTRIC :
SPECIFICATIONS
•
•
•
•
Power
NA
•
Voltage
NA
•
Gas:
BTU
NA
Con.
∅
Equipment drop in I.D. Stone top Counter.
1.2 mm thick S.S. sink.
One (1) TEKA make Sink Size is 385 mm dia X 180
mm deep model is BE39.18 with Drain Fitting to be
provided.
Deck Mounted Sensor Operated Faucet: - Make is
TOTO and Model no is TS-191.
(1) Soap Dispenser Make is PONGCHAI and model is
402073.
Top visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
AS PER ABOVE SPECS
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 286 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-02
CABINET WITH DROP IN SINK
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1450 mm
700mm
700mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Wast
e
∅
2”
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
•
•
•
•
•
•
0.9mm thick top SS
304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. full bottom shelf.
One (1) no. 1.6mm thick S.S. Sink of 400mm x
400mm x 200mm high with Drain Fitting. (Drop in
type)
Three (03) no. hinged door with integral Handle.
S.S. channel frame work.
Left side of top provide cut out as per modular
equipment drop in hand wash sink.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 287 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-03
CABINET WITH WASTE BIN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
500mm
700mm
800mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
SPECIFICATIONS
•
•
•
Power
NA
•
•
•
Voltage
NA
•
ELECTRIC :
EXHAUST
NA
1.2mm thick S.S. cabinet
1.2 mm front panel with handle with approx 400mm x
150mm high flap for garbage entry.
Approx 450mm x 500mm x 500mm high, 1.2mm thick
S.S. garbage can, all corners coved.
Four (4) no. 102mm dia castor two with brakes.
Unit installed below stone top counter
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 288 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-04
DROP IN DRIP PAN WITH SKWER
HANGER
QUANTITY: 02
Tentative Image
SIZE
Width
Depth:
Height:
----
----
----
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
•
•
•
Approx 750mm x 225mm x 50mm high , 1.2mm thick drip
pan with flanges all sides.
1.2mm thick S.S. removable perforated cover size as per
drip tray
Approx 1200mm high S.S. pipe hanger rail suitably to be
welded to be S.S. drip tray & secured to I.D. stone top
counter.
All front/ visible Exterior S.S color Mirror finish to
be provided (Final finish to be confirm by I.D
before production)
Gas:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
This item is located front of house & will be
highly visible , the finishing required must
be first class & will be required coordination
with the Interior designer/Interior
contractor
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 289 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-06
UNDER COUNTER REFRIGERATOR
QUANTITY: 02
SIZE:
Width:
Depth:
Height:
1550mm
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.45 k.w.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Unit installed below stone top counter by I.D
on plinth.
• All visible Exterior S.S Mirror finish to be
provided (to be confirm by I.D before
production)
• 0.9mm thick S.S. top.
• SS 304 interior and exterior.
• Six (6)no S.S Drawer with removable 1/1 G.N pans
insulation.
• With Levelers.
• Ambient temperature 43 deg C.
• Internal Temp 0 Deg C to 4 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A.
• Remote Compressor Housing.
• Digital read out thermometer, cord with time delay
auto start.
• Forced draft cooling.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating.(for condensate water
evaporation),
• Unit construction to be as per V cut Bending.
Power cord.
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
IGLU
WILLIAMS
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
CUSTOM BUILT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 290 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-07
DROP IN FOUR ZONE INDUCTION RANGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
780 mm
770 mm
Approx
265mm
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
9.2 KW
Voltage
440-50-3P
SPECIFICATIONS
•
•
•
•
•
•
•
Electrically operated equipment.
Drop in Equipment.
Induction cooking top.
Four (04) Hob Induction,
Thermostat cut-off.
304 S.S Constructions.
With Control to be remote.
EXHAUST
GAS:
BTU
NA
Con.
∅ NA
ACCESSORIES:
SPECIAL NOTE:
• Power Cord & Plug.
Accessories for installation and operation.
Installations and Cut-outs to be coordinate with I.D. ID to
make provision for installing controls
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
MKN
1523405-00ZPOB
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 291 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-07A
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
Approx
1400mm
1050mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
SPECIFICATIONS
•
•
•
•
•
Power
NA
•
Voltage
NA
•
Gas:
BTU
NA
Con.
∅
•
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom shelf
Top unit provide cut out as per Drop in modular
equipment Drop in four zone induction range.
Three (03) no. 1.2 mm thick door with handle &
locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 292 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-09
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
Approx
1200mm
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
SPECIFICATIONS
•
•
•
•
•
Power
NA
•
Voltage
NA
•
Gas:
BTU
NA
Con.
∅
•
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom & middle shelves.
As shown in plan top unit provide cut out as per
Four no. Gn. 1/2 pan.
Three (03) no. 1.2 mm thick door with handle &
locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 293 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-11
DROP IN HOT PLATE
QUANTITY: 03
SIZE :
Width:
Depth:
Height:
1205 mm
500 mm
64 mm
CAPACITY
M.E.P REQUIREMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
1.2 KW
Voltage
220v-50c-1p
SPECIFICATIONS
• Drop in Unit
• With Black ceran pyroceramic top.
• Frame to be 304 S.S Construction.
• With mat type heating element.
• Thermostatically-controlled heating element.
• With insulation.
• Temperature to be adjustable up to maximum 122 Deg
Celsius.
• Flush Mount Electronic Control Box with Lighted On/Off
Rocker Switch.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
Accessories for installation & operation.
SPECIAL NOTE:
To be coordinated with ID for cut outs,
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDER.
PIPER BERKELEY SERIES
B26050
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 294 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-12
LIGHT BRIDGE WITH STRIP HEATER
QUANTITY: 03
SIZE
Width:
Depth:
Height:
APPROX
1350 mm
350 mm
350MM
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
•
SPECIFICATIONS
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
•
•
6mm thick Tempered glass.
S.S. cover (Mirror finish)
38m dia S.S. support (Mirror finish)
Sturdy continuous stainless steel housings.
Pre-focused heat.
Coated shatter-resistant incandescent lights
Include as standard equipment four stainless steel
shelf mounting tabs
an on-off switch to be installed to either the front or
rear of the unit.
The infrared heating element shall be tubular metal
sheathed.
ELECTRIC :
Power
0.6 K.W
Voltage
220V-50C-1P
EXHAUST
•
•
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Breath protector, cord and plug set, indicator light, and infinite
control built-in.
•
This item is located front of house & will be
highly visible , the finishing required must be
first class & will be required coordination with
the Interior designer.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
CUSTOM BUILT + HATCO
CUSTOM BUILT + GRN4-42
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 295 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-14
DROP IN HEATED STONE TOP
QUANTITY: 02
SIZE
Width:
Depth:
Height:
914 mm
457 mm
64 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.93 KW
Voltage
220v-50c-1p
SPECIFICATIONS
• Drop in Unit.
• Bermuda sand color of stone.
• Stone top to be approved food safe material.
• Thermostatically-controlled heated base.
• Temperatures Range from 100°C to 200°C to be
maintained at 29˚C ambient room temperature.
• Flush Mount Electronic Control Box with Lighted
On/Off Rocker Switch.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
To be coordinated with ID for cut outs.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER.
HATCO
GRSSB-3618
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 296 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-15
RECTRACTABLE HEAT LAMP
QUANTITY: 04
SIZE
Dia:
Depth:
267 mm
--
CAPACITY
Height:
990 to
1765 mm
250 Watt
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
SPECIFICATIONS
• lamp bulb heating rated of 250 watt each
• Remote Operated Switch.
• Cord length Adjustable from 39” to 69 -½”
• Bulb Color to be confirmed by I.D.
• Outer finish to be confirmed by I.D.
ELECTRIC :
Power
0.25 KW.
Voltage
220v-50c-1p
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
Accessories for installation and operation.
SPECIAL NOTE:
Outer shade to be Confirmed by I.D.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER.
HATCO
DLH-775-RL
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 297 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-16
DROP IN GRIDDLE PLATE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
780mm
620 mm
270 mm
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
10.8 k.w.
Voltage
440-50-3P
SPECIFICATIONS
• Equipment to Operate on Electrical.
• Drop in unit.
• Splash Back in Stainless steel grids on three sides.
• Inner and outer Body 304 Stainless steel.
• Thermostat Overheat shut off.
• The control to be remote of unit.
• With Control to be remote.
EXHAUST
GAS:
BTU
NA
Con.
∅ NA
ACCESSORIES:
SPECIAL NOTE:
Chrome-plated griddle surface; Grooved griddle surface, 3/4-inch
thick ribbed steel plate
Installations and Cut-outs to be coordinate with I.D. ID to
make provision for installing controls
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
MKN
1521130-01ZPO1
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 298 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-16A
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
Approx
1400mm
1050mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
SPECIFICATIONS
•
•
•
•
•
Power
NA
•
Voltage
NA
•
Gas:
BTU
NA
Con.
∅
•
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom shelf
Top unit provide cut out as per Drop in modular
equipment Drop in Griddle plate.
Three (03) no. 1.2 mm thick door with handle &
locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 299 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-17
EXHAUST HOOD WITH UV GREASE
REMOVAL COMPLETE WITH DEMAND
CONTROL VENTILATION & FIRE
SUPRESSION SYSTEM
QUANTITY: 02
SIZE
Width
Depth
Height:
1400mm
1350mm
555mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅ NA
Wast
e
∅ NA
SPECIFICATIONS
•
•
ELECTRIC :
Power
0.5 K.W (for
light)
Voltage
220v-50c-1p
EXHAUST
•
1340 CFM
GAS:
BTU
NA
Con.
∅
KIT. EQPT. SPECS
INDIA
UAE
•
•
•
•
The kitchen canopy shall be constructed from 1.0 mm
AISI 304 stainless steel and shall be supplied complete
with grease filters (UL listed), pressure measurement
taps, exhaust adjustment systems. The canopy shall
be HACCP certified.
The system to include lightweight stainless steel UV
lamps cassettes, directly integrated in the exhaust
plenum, behind the double stage mechanical filtration.
Cassettes should be easily removable by disconnecting
the electrical connectors.
Outer casing panels to be constructed from AISI 304
stainless steel in a brushed satin finish, in a modular
Construction. The joints of the lower edge shall be
fully welded to be liquid-tight, avoiding harmful
dripping of condensation. All exposed welds should be
ground and polished to the metal’s original finish.
The bottom edge of the exhaust plenum should be
aerodynamically designed (no flat surface).
Canopy ends shall be of double-sidewall construction.
Exhaust
The exhaust air flow will be based on the convective
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 300 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
•
•
•
•
•
KIT. EQPT. SPECS
INDIA
UAE
heat generated by the appliances under each canopy.
Submittal shall include convective heat calculations
based on the input power of the appliances served.
Grease filters
The canopy shall be equipped with a stainless steel
grease filter. The grease removal efficiency should be
95% for particles a diameter of 10 microns or larger.
The filter shall be NSF and UL classified. Baffle or slot
type grease filters shall not be used.
Exhaust Balancing dampers
Every spigot connections for extracted air shall be
supplied with an automated motorized balancing
damper. The damper shall automatically adjust
exhaust airflow based on direct pressure readings
from integral T.A.B test and balance port in the hood.
The Model ABD will have night time setback feature
which will automatically close the damper when the
exhaust system is shut down to prevent outside air
from migrating into the space. The Model ABD should
fail safe open on power interruption.
The damper outer casing shall be constructed of
continuously welded 1.2mm thick S.S.including the
balancing blades. Adjustment of the parallel dampers
(in open position) will be achieved by manually turning
the locking adjustment bracket until the desired
pressure reading is achieved.
Light Fixtures
Each canopy shall be provided with a LED light fixture
to provide approx. 500 lux at the cooking appliances
work surface. The light is protected with a stainless
steel hatch with plain milled finish, surrounded by a
tempered-glass light diffuser (the heat tolerance of the
glass shall be -40 to 300 °C).
Demand Control Ventilation
The system to come equipped with hood mounted
infrared cooking activity sensors capable of measuring
appliance surface temperatures. Infrared sensor will
read appliance surface temperature which will be
translated by the specific calculation algorithm for that
appliance and will respond proactively to any change
in cooking status. Infrared sensor and exhaust collar
mounted temperature sensor work in concert on
differential temperature reading back to the controller.
The system shall automatically control the speed of
the exhaust fan (and supply fan if applicable) based
on appliances status, cooking activities and exhaust air
temperatures. The system can be controlled with
either manual On/Off switch, a 24hrs automated
schedule with a manual override function, or the
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 301 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
hoods can be automatically regulated based on the
appliance status. The integrated PLC will analyze
signals from the cooking activity sensors, temperature
sensors and pressure transducers mounted in the
hood and then send a signal to the VFD(to be
provided by HVAC contractor) to adjust the exhaust
fan (and supply fan if applicable) speed to satisfy
current cooking load conditions, as well adjust the
automated balancing dampers accordingly. The
system can be monitored and controlled with an
internet connected PC from either a local or remote
location.
Fire Suppression system
Provide an automatic, water-assisted, wet chemical,
fire suppression System with provision of manual pull
station to be located in a path of egress at a maximum
height of 60 inches above the floor.Unit to be provided
with nozzles for equipment protection, plenum
protection and duct protection.Should provide 100%
protection as required by codes, standards, national,
state, and local requirements.Provide fusible links in
each exhaust duct cut-out and at a maximum gap of 2
feet (610mm) between them.Unit to be provided with
water inlet which would be connected to the fire pipe
line.Stainless steel pipe drops to be provided to the
discharge nozzles and plenum both. Discharge nozzles
should not exceed 610mm from each other.The
system, including all of its components, shall be UL
Standard 300/ ULC Standard ORD-C1254.6 Listed.
Automatic actuation shall be initiated by separation of
fusible links. Fusible link break temperature should be
as per the equipment below the same.
Distance of cylinder assembly & pull down points as
per lay out plan.
Unit should be complete of Gas shut off valve,
Disconnect system for Electrical equipment, Hood light
(incase of same is in a non fire rated enclosure,
Disconnect hvac system.
ACCESSORIES:
Standard accessories for installation, operations and
maintenance to be provided.
SAFETY NORMS:
UV access door closing and filters presence shall be
permanently controlled with maintenance free magnetic
proximity switches (automatic and immediate UV lamps
switch off).
• Each UV canopy section is equipped with a plug and play UV
module, integrated behind the light casing, ease of access
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 302 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
using the light hatch. Each UV module shall communicate with
a UV control panel, integrated in one of the canopy section.
The control panel displays warnings or
potential working defaults and shall be able to identify on
which canopy section where they occur and, if needed, which
ballast or lamps are concerned.
SPECIAL NOTE:
•
•
•
Fire suppression system should be installed by a certified vendor
and all testing and commissioning certificated needs to be
provided.
Minimum of five (05) years maintenance contract should be there
between the client and the fire suppression system vendor for
periodic maintenance inclusive cylinder and accessories as per fire
norms.
Detail provided in this specification in terms of number of Nozzles,
ducts cut outs , distance of unit etc. needs to be coordinated and
verified by Vendor. Any Deviation from above mention and
specification to be brought to the notice else it is expected that the
vendor in following complete specification as mentioned above.
HVAC Cutouts and fresh air cutouts to be coordinated with HVAC consultant. Shop drawing
with plan, elevation and section to be submitted for approval.
HALTON+ANSUL
UVI-S + MARVEL+(P07)
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 303 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-18
DROP IN REFRIGERATED ICE WELL
QUANTITY: 01
SIZE
Width:
Depth:
Height:
310mm(Inte
rnal)
510mm(Inter
nal)
125mm
(Internal)
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
SPECIFICATIONS
Cold
∅
NA
Hot
∅
NA
•
•
•
Waste
∅
1”
•
ELECTRIC :
•
Power
0.25 H.P.
Voltage
220v-50c-1ph.
EXHAUST
•
•
•
Unit drop in I.D. stone top counter .
Lights as per I.D or Lighting Consultant.
Internal size Approx 310 mm x 510mm D x 125 High
(suitable tor six (06) no. GN. 1/6 pan.
1.2 mm thick cold pan with insulation and at all sides &
Drain outlet. .
Provide light arrangement , Led light all four sides in side
body. (Light as per I.D.)
Remote compressor
1.2mm thick S.S. perforated false bottom.
Provide removable S.S. for GN. pan rest/Holding
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
Power cord
SPECIAL NOTE:
To be coordinated with ID for cut outs Shop drawing with
plan, elevation and section to be submitted for approval.
Finish to be co-ordinate with I.D
IGLU
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 304 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-22
GRIDDLE PLATE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
800 mm
850 mm
700mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• Equipment without legs suitably to be mounted on Masonry
plinth
• smooth plate
• Equipment to Operate on LPG Gas.
• Freestanding Fry top.
• Cooking Surface of 764 W X640 D
• Splash Back in Stainless steel grids on three sides.
• Inner and outer Body AISI 306 Stainless steel
• Under Storage cupboard with Front hinged doors.
• Lateral drain channel for cleaning.
• Piezo ignition.
• Flame failure device.
• Fat collecting container.
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
56689
Con.
∅
¾”
ACCESSORIES:
Scrapper with brush;
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing
with plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 305 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-23
SPREADER TABLE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
800mm
850 mm
700mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
Equipment without legs suitably to be mounted on Masonry
plinth
S.S. Construction AISI 306.
Under storage cupboard.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 306 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-24
FOUR BURNER RANGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
800 mm
850 mm
700mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
NA
Voltage
NA
Equipment without legs suitably to be mounted on Masonry
plinth
Equipment to Operate on gas.
Four (4) Burners open top range.
Piezo ignition.
Flame failure device.
In build pressure Control regulator.
2 CNS Sliding grid.
Below under storage cupboard with handle
S.S. Legs with S.S. adjustable feet.
•
•
•
•
•
•
•
•
ELECTRIC :
Power
SPECIFICATIONS
EXHAUST
NA
GAS:
BTU
98000
Con.
∅
¾”
ACCESSORIES:
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 307 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-25
MOBILE CHARCOAL FIRED TANDOOR
QUANTITY: 02
SIZE
DIA:
Depth:
Height:
--
900 mm
820 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
• Charcoal operated.
• Fully insulated
• with analogue thermometer,
• Provided on four castors with breaks
• Thermal shock resistant pot.
• With ash removable window.
• Removable lid with handle.
• Free standing.
• Outer finish to be confirm by I.D.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
All accessories for installation and operation.
Shop drawing with plan, elevation and section to be
submitted for approval. Finish to be co-ordinate with I.D
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
CLAY OVEN
TAJ TANDOOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 308 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-27
EXHAUST HOOD WITH UV GREASE
REMOVAL COMPLETE WITH DEMAND
CONTROL VENTILATION & FIRE
SUPRESSION SYSTEM
QUANTITY: 01
SIZE
Width
Depth
Height:
4400mm
1350mm
555mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅ NA
Wast
e
∅ NA
SPECIFICATIONS
•
•
ELECTRIC :
Power
0.5 K.W (for
light)
Voltage
220v-50c-1p
EXHAUST
•
4200 CFM
GAS:
BTU
NA
Con.
∅
KIT. EQPT. SPECS
INDIA
UAE
•
•
•
•
The kitchen canopy shall be constructed from 1.0 mm
AISI 304 stainless steel and shall be supplied complete
with grease filters (UL listed), pressure measurement
taps, exhaust adjustment systems. The canopy shall
be HACCP certified.
The system to include lightweight stainless steel UV
lamps cassettes, directly integrated in the exhaust
plenum, behind the double stage mechanical filtration.
Cassettes should be easily removable by disconnecting
the electrical connectors.
Outer casing panels to be constructed from AISI 304
stainless steel in a brushed satin finish, in a modular
Construction. The joints of the lower edge shall be
fully welded to be liquid-tight, avoiding harmful
dripping of condensation. All exposed welds should be
ground and polished to the metal’s original finish.
The bottom edge of the exhaust plenum should be
aerodynamically designed (no flat surface).
Canopy ends shall be of double-sidewall construction.
Exhaust
The exhaust air flow will be based on the convective
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 309 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
•
•
•
•
•
KIT. EQPT. SPECS
INDIA
UAE
heat generated by the appliances under each canopy.
Submittal shall include convective heat calculations
based on the input power of the appliances served.
Grease filters
The canopy shall be equipped with a stainless steel
grease filter. The grease removal efficiency should be
95% for particles a diameter of 10 microns or larger.
The filter shall be NSF and UL classified. Baffle or slot
type grease filters shall not be used.
Exhaust Balancing dampers
Every spigot connections for extracted air shall be
supplied with an automated motorized balancing
damper. The damper shall automatically adjust
exhaust airflow based on direct pressure readings
from integral T.A.B test and balance port in the hood.
The Model ABD will have night time setback feature
which will automatically close the damper when the
exhaust system is shut down to prevent outside air
from migrating into the space. The Model ABD should
fail safe open on power interruption.
The damper outer casing shall be constructed of
continuously welded 1.2mm thick S.S.including the
balancing blades. Adjustment of the parallel dampers
(in open position) will be achieved by manually turning
the locking adjustment bracket until the desired
pressure reading is achieved.
Light Fixtures
Each canopy shall be provided with a LED light fixture
to provide approx. 500 lux at the cooking appliances
work surface. The light is protected with a stainless
steel hatch with plain milled finish, surrounded by a
tempered-glass light diffuser (the heat tolerance of the
glass shall be -40 to 300 °C).
Demand Control Ventilation
The system to come equipped with hood mounted
infrared cooking activity sensors capable of measuring
appliance surface temperatures. Infrared sensor will
read appliance surface temperature which will be
translated by the specific calculation algorithm for that
appliance and will respond proactively to any change
in cooking status. Infrared sensor and exhaust collar
mounted temperature sensor work in concert on
differential temperature reading back to the controller.
The system shall automatically control the speed of
the exhaust fan (and supply fan if applicable) based
on appliances status, cooking activities and exhaust air
temperatures. The system can be controlled with
either manual On/Off switch, a 24hrs automated
schedule with a manual override function, or the
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 310 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
hoods can be automatically regulated based on the
appliance status. The integrated PLC will analyze
signals from the cooking activity sensors, temperature
sensors and pressure transducers mounted in the
hood and then send a signal to the VFD(to be
provided by HVAC contractor) to adjust the exhaust
fan (and supply fan if applicable) speed to satisfy
current cooking load conditions, as well adjust the
automated balancing dampers accordingly. The
system can be monitored and controlled with an
internet connected PC from either a local or remote
location.
Fire Suppression system
Provide an automatic, water-assisted, wet chemical,
fire suppression System with provision of manual pull
station to be located in a path of egress at a maximum
height of 60 inches above the floor. Unit to be
provided with nozzles for equipment protection,
plenum protection and duct protection. Should provide
100% protection as required by codes, standards,
national, state, and local requirements. Provide fusible
links in each exhaust duct cut-out and at a maximum
gap of 2 feet (610mm) between them.Unit to be
provided with water inlet which would be connected to
the fire pipe line. Stainless steel pipe drops to be
provided to the discharge nozzles and plenum both.
Discharge nozzles should not exceed 610mm from
each other. The system, including all of its
components, shall be UL Standard 300/ ULC Standard
ORD-C1254.6 Listed. Automatic actuation shall be
initiated by separation of fusible links. Fusible link
break temperature should be as per the equipment
below the same.
Distance of cylinder assembly & pull down points as
per lay out plan.
Unit should be complete of Gas shut off valve,
Disconnect system for Electrical equipment, Hood light
(incase of same is in a non fire rated enclosure,
Disconnect hvac system.
ACCESSORIES:
Standard accessories for installation, operations and
maintenance to be provided.
SAFETY NORMS:
UV access door closing and filters presence shall be
permanently controlled with maintenance free magnetic
proximity switches (automatic and immediate UV lamps
switch off).
• Each UV canopy section is equipped with a plug and play UV
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 311 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
module, integrated behind the light casing, ease of access
using the light hatch. Each UV module shall communicate with
a UV control panel, integrated in one of the canopy section.
The control panel displays warnings or
potential working defaults and shall be able to identify on
which canopy section where they occur and, if needed, which
ballast or lamps are concerned.
SPECIAL NOTE:
•
•
•
Fire suppression system should be installed by a certified vendor
and all testing and commissioning certificated needs to be
provided.
Minimum of five (05) years maintenance contract should be there
between the client and the fire suppression system vendor for
periodic maintenance inclusive cylinder and accessories as per fire
norms.
Detail provided in this specification in terms of number of Nozzles,
ducts cut outs , distance of unit etc. needs to be coordinated and
verified by Vendor. Any Deviation from above mention and
specification to be brought to the notice else it is expected that the
vendor in following complete specification as mentioned above.
HVAC Cutouts and fresh air cutouts to be coordinated with HVAC consultant. Shop drawing
with plan, elevation and section to be submitted for approval.
HALTON+ANSUL
UVI+ MARVEL+(P13)
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 312 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-32
DROP IN ICE CREAM CABINET
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
1200 mm
625 mm
Approx
350mm
CAPACITY
Approx 12 gallons
M.E.P REQUIREMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
ELECTRIC :
Power
0.35 K.W.
Voltage
220v-50c-1ph.
EXHAUST
NA
Drop in Unit.
1.2mm thick S.S. construction
Approx 12 gallons capacity.
Glass sliding lid
Suitable for ice cream storage to maintain -18°C to -21°C.
to be maintained
Die stamped top opening with raised edge.
REFRIGERANT GAS: R-404 A.
Remote compressor
polyurethane foam throughout unit
Top visible Exterior S.S Mirror finish to be provided
(Final finish to be confirm with I.D before
production)
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
•
•
To be coordinated with ID for cut outs,
IGLU
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
Power cord with plug.
Accessories for installation & operation and Maintenance.
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 313 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-34
DROP IN DEEPERWELL WITH FAUCET
QUANTITY: 01
SIZE :
Width:
Depth:
175mm Dia
(int.)
Height:
127mm
CAPACITY
M.E.P REQUIREMENT
PLUMBING :
Cold
∅
3/8"
Hot
∅
NA
Wast
e
∅
1-1/2"
SPECIFICATIONS
•
•
•
Drop in Unit.
S.S. 304 construction
S.S. faucet.
•
•
Power cord with plug.
Accessories for installation & operation and Maintenance.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
To be coordinated with ID for cut outs,
T&S
00667845+Faucet
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 314 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-35
INCOGNEETO INDUCTION PLATE
QUANTITY: 02
SIZE:
Width:
Depth:
502 mm
Height:
444 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
105 mm
SPECIFICATIONS
•
Cold
∅
NA
Hot
∅
NA
•
Wast
e
∅
NA
•
ELECTRIC :
Power
0.65 K.W
Voltage
220v-50c-1p
EXHAUST
•
•
NA
GAS:
•
BTU
NA
Con.
∅
mm
•
•
•
•
Under counter-top design, aluminum housing, heavy
duty energy efficient electronics, and polycarbonate
top.
Mounts to underside of counter-top on fixed position
Track system - 18.4” (468mm) supplied.
Units require CookTek Magneeto™ 2 trivet (patent pending)
- included and standard induction compatible chafing
dishes. Magneeto™ 2 acts as a temperature sensor,
communicator, and locator device which allows heating of
induction compatible dishes through standard counter-top
Temperature selected via control panel, or Magneeto™ 2
can be programmed via keypad to preset a temperature for
automatic control
Automatic pan detection allows for instant energy
transmission to pan, and almost no energy consumption
when pan is not present
Maximum temperature limit prevents damage to chafing
dishes, keeps food in the “safe zone,” and keeps operations
within ventilation code.
Auto shut-off to prevent overheating, self-diagnostics, and
pan.
LCD Display for Precise feedback of temperature.
Unit shall have LCD display panel and capacitive touch
For precise user feedback.
Dish shall be constructed of a stainless steel exterior with a
glass window in the lid for easy viewing. Dish shall come
equipped with remote temperature sensor, side vents for
optimum ventilation, an adjustable rate slow-closing lid,
stainless steel spoon holder, and one single-chamber
stainless steel insert.
Dish intended for use on induction buffet units.
ACCESSORIES:
SPECIAL NOTE:
To be coordinated with ID for Under Neath mounting.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER.
COOK-TEK
B652-U
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 315 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-36
WAFFLE BAKING MACHINE
QUANTITY: 01
SIZE
Width:
Depth:
305 mm
440 mm
CAPACITY
Single baker
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
1.6 KW
Voltage
220v-50c-1p
Height:
230 mm
SPECIFICATIONS
•
•
•
•
•
•
•
With S.S 304 AISI Construction.
With On/Off switch.
With Thermostat cut-off.
With Pilot Lights.
Adjustable Legs.
With Special Fork for Waffle.
With Round Mould diameter of 190 mm.
•
•
Replacement drip tray
Power cord with plug
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
ROLLER GRILL
GES 70
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 316 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-37
CREP MAKING MACHINE
QUANTITY: 01
SIZE
Width:
Depth:
450 mm
500 mm
CAPACITY
Single
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
3.0 KW
Voltage
220v-50c-1p
Height:
240 mm
SPECIFICATIONS
•
•
•
•
•
•
•
•
Electric operated.
400 mm plate dia.
Enameled cast iron plates.
With wooden spreader.
With Drawer to keep warm dishes.
Spiral Heating element 0 to 300 Deg Celsius.
With Thermostat cut-off.
With Pilot Light.
•
•
blinis cast iron plate 6 x 110 mm
Power cord with plug
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
ROLLER GRILL
CSE400E
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 317 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-38
DROP IN GRANITE FROST TOP WITH
SNEEZE GUARD
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
1400 mm
650mm
Approx
100mm
CAPACITY
M.E.P REQUIREMENT
PLUMBING :
SPECIFICATIONS
•
•
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
•
•
Power
0.5 H.P
Voltage
220v-50c-1ph.
•
•
•
ELECTRIC :
EXHAUST
•
NA
GAS:
BTU
NA
Con.
∅
•
NA
ACCESSORIES:
SPECIAL NOTE:
•
•
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
INDIA
UAE
Power cord with plug.
Accessories for installation & operation and Maintenance.
This item is located front of house & will be
highly visible , the finishing required must be first
class & will be required coordination with the
Interior designer/Interior contractor
IGLU
KIT. EQPT. SPECS
Stone top frost top (Final color as per I.D.)
Top has a drain trough and overhang around
perimeter
Exterior housing is 22-gauge S.S..
Frost top is sealed with refrigeration lines and
insulated with high-density, closed-cell polyurethane.
REFRIGERANT GAS : R-404 A
Remote Compressor housing.
Sides and bottom to be wrapped with refrigeration
lines and insulated with high-density closed-cell poly
urethane.
Equipment suitable to be drop in I.D. stone top
counter.
Unit top to be installed with seamless finish
with stone top counter.
Approx 1650mm long x 450mm (Double sided)
x 550mm high sneeze guard mounted on 50mm
dia round pipe and suitable to secured I.D.
stone top counter.
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 318 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-39
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
Approx
850mm
650mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
SPECIFICATIONS
•
•
•
•
•
Power
NA
•
Voltage
NA
•
Gas:
BTU
NA
Con.
∅
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom & middle shelves.
Two (02) no. 1.2 mm thick door with handle &
locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 319 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-40
DROP IN REFRIGERATED ICE WELL WITH
SNEEZE GUARD
QUANTITY: 01
SIZE
Width:
Depth:
Height:
900mm
(Internal)
600mm
(Internal)
125mm
(Internal)
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
1”
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
0.25 H.P.
Voltage
220v-50c-1ph.
EXHAUST
NA
•
•
•
•
GAS:
BTU
NA
Con.
∅
Unit drop in I.D. stone top counter .
Lights as per I.D or Lighting Consultant.
Internal size 900 mm x 600mm D x 125 High
1.2 mm thick cold pan with insulation and at all sides &
Drain outlet. .
Provide light arrangement , Led light all four sides in side
body. (Light as per I.D.)
Remote compressor
1.2mm thick S.S. perforated false bottom.
Approx 1200mm long x 450mm x 550mm high
sneeze guard mounted on 50mm dia round pipe
and suitable to secured I.D. stone top counter.
Top visible Exterior S.S Mirror finish to be provided
(Final finish to be confirm with I.D before
production)
ACCESSORIES:
Power cord
SPECIAL NOTE:
To be coordinated with ID for cut outs Shop drawing with
plan, elevation and section to be submitted for approval.
Finish to be co-ordinate with I.D
IGLU
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 320 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-41
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
Approx
1100mm
700mm
Approx
mm
600
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
SPECIFICATIONS
•
•
•
•
•
Power
NA
•
Voltage
NA
•
Gas:
BTU
NA
Con.
∅
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom & middle shelves.
Two (02) no. 1.2 mm thick door with handle &
locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 321 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-42
UNDER COUNTER REFRIGATOR
QUANTITY: 01
SIZE:
Width:
Depth:
Height:
1035mm
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Unit installed below stone top counter by
I.D on plinth.
• All visible Exterior S.S Mirror finish to be
provided (to be confirm by I.D before
production).
• 0.9mm thick S.S. top.
• SS 304 interior and exterior.
• Four (04) no S.S Drawer with removable 1/1
G.N pans insulation.
• With Levelers.
• Ambient temperature 43 deg C.
• Internal Temp 0 Deg C to 4 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A.
• Remote Compressor Housing.
• Digital read out thermometer, cord with time
delay auto start.
• Forced draft cooling.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating.(for condensate water
evaporation),
• Unit construction to be as per V cut Bending.
Power cord.
Cold
∅
NA
Hot
∅
NA
Wast ∅
e
NA
ELECTRIC :
Power
0.35 k.w.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
•
Shop drawing with plan, elevation and section
to be submitted for approval.
IGLU
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 322 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-43
CABINET WITH WASTE BIN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
500mm
700mm
800mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
SPECIFICATIONS
•
•
•
Power
NA
•
•
•
Voltage
NA
•
ELECTRIC :
EXHAUST
NA
1.2mm thick S.S. cabinet
1.2 mm front panel with handle with approx 400mm x
150mm high flap for garbage entry.
Approx 450mm x 500mm x 500mm high, 1.2mm thick
S.S. garbage can, all corners coved.
Four (4) no. 102mm dia castor two with brakes.
Unit installed below stone top counter
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 323 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-44
CABINET WITH DROP IN SINK
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1050 mm
700mm
700mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Wast
e
∅
2”
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
•
•
•
•
•
•
0.9mm thick top SS
304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. full bottom shelf.
One (1) no. 1.6mm thick S.S. Sink of 350mm x
400mm x 200mm high with Drain Fitting. (Drop in
type)
Two (02) no. hinged door with integral Handle.
S.S. channel frame work.
Left side of top provide cut out as per modular
equipment drop in hand wash sink.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 324 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-45
DROP IN HAND WASH SINK
QUANTITY: 01
Tentative Image
SIZE
Width
Depth:
Height:
385mm
385mm
180mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Wast
e
∅
1½”
ELECTRIC :
SPECIFICATIONS
•
•
•
•
Power
NA
•
Voltage
NA
•
Gas:
BTU
NA
Con.
∅
Equipment drop in I.D. Stone top Counter.
1.2 mm thick S.S. sink.
One (1) TEKA make Sink Size is 385 mm dia X 180
mm deep model is BE39.18 with Drain Fitting to be
provided.
Deck Mounted Sensor Operated Faucet: - Make is
TOTO and Model no is TS-191.
(1) Soap Dispenser Make is PONGCHAI and model is
402073.
Top visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
AS PER ABOVE SPECS
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 325 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-47
SANDWICH GRILLER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
335 mm
385 mm
220 mm
CAPACITY
Cooking area – 260 X 240
mm
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
2.0 KW
Voltage
220v-50c-1p
SPECIFICATIONS
• Electrical operated.
• Cast Iron Plate.
• With thermostat 0-300°C
• With juice tray
• With Heat resistant handles.
• On/off indicator.
• With a scraper.
• With automatic regulation of the heat of cooking.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
Electronic timer 3 minute.
SPECIAL NOTE:
ROLLER GRILL (FRANCE)
LINCAT
TOASTMASTER
SAVOYE
GG1R + SS1
A710PA
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 326 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-49
CABINET WITH WASTE BIN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
500mm
700mm
800mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
SPECIFICATIONS
•
•
•
Power
NA
•
•
•
Voltage
NA
•
ELECTRIC :
EXHAUST
NA
1.2mm thick S.S. cabinet
1.2 mm front panel with handle with approx 400mm x
150mm high flap for garbage entry.
Approx 450mm x 500mm x 500mm high, 1.2mm thick
S.S. garbage can, all corners coved.
Four (4) no. 102mm dia castor two with brakes.
Unit installed below stone top counter
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 327 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-50
UPRIGHT OPEN DISPLAY SHOWCASE
QUANTITY: 01
SIZE
Width:
Depth:
1200mm
750mm
Height:
1950 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
ELECTRIC :
Power
1.0 H.P
Voltage
220v-50c-1p
EXHAUST
NA
•
•
•
GAS:
BTU
NA
Con.
∅
•
•
•
•
•
•
•
mm
•
All exterior , rear & interior 0.9mm thick S.S. 304 Body.
(Final finish as per I.D.)
Unit both sides ultra clear glass covering & rear S.S.
cladding.
Internal temp +2 Deg C to + 06 Deg C.
Three (3) no. Glass shelves
Forced draft cooling.
Light as per ID.
With temperature display.
Remote compressor
Digital read out thermometer, cord with time delay auto
start.
With Humidity control.
Drip tray with heating. (For condensate water evaporation).
50mm high S.S. legs with S.S. feet with front of legs
covered with S.s. sheet.
All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm by I.D before
production)
ACCESSORIES:
SPECIAL NOTE:
This item is located front of house & will be highly
visible , the finishing required must be first class & will
be
required
coordination
with
the
Interior
designer/Interior contractor
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
IGLU
WILLIAMS
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
CUSTOM BUILT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 328 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-51
CABINET WITH DROP IN SINK
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1800mm
700mm
700mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Wast
e
∅
2”
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
•
•
•
•
•
•
0.9mm thick top SS
304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. full bottom shelf.
One (1) no. 1.6mm thick S.S. Sink of 400mm x
400mm x 200mm high with Drain Fitting. (Drop in
type)
Four (04) no. hinged door with integral Handle.
S.S. channel frame work.
Right side of top provide cut out as per modular
equipment drop in hand wash sink.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 329 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-52
DROP IN HAND WASH SINK
QUANTITY: 01
Tentative Image
SIZE
Width
Depth:
Height:
385mm
385mm
180mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Wast
e
∅
1½”
ELECTRIC :
SPECIFICATIONS
•
•
•
•
Power
NA
•
Voltage
NA
•
Gas:
BTU
NA
Con.
∅
Equipment drop in I.D. Stone top Counter.
1.2 mm thick S.S. sink.
One (1) TEKA make Sink Size is 385 mm dia X 180
mm deep model is BE39.18 with Drain Fitting to be
provided.
Deck Mounted Sensor Operated Faucet: - Make is
TOTO and Model no is TS-191.
(1) Soap Dispenser Make is PONGCHAI and model is
402073.
Top visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
AS PER ABOVE SPECS
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 330 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-53
UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE:
Width:
Depth:
Height:
1550mm
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.45 k.w.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Unit installed below stone top counter by I.D
on plinth.
• All visible Exterior S.S Mirror finish to be
provided (to be confirm by I.D before
production)
• 0.9mm thick S.S. top.
• SS 304 interior and exterior.
• Six (6)no S.S Drawer with removable 1/1 G.N pans
insulation.
• With Levelers.
• Ambient temperature 43 deg C.
• Internal Temp 0 Deg C to 4 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A.
• Remote Compressor Housing.
• Digital read out thermometer, cord with time delay
auto start.
• Forced draft cooling.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating.(for condensate water
evaporation),
• Unit construction to be as per V cut Bending.
Power cord.
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
IGLU
WILLIAMS
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
CUSTOM BUILT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 331 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-55
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
Approx
750mm
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
SPECIFICATIONS
•
•
•
•
•
Power
NA
•
Voltage
NA
•
Gas:
BTU
NA
Con.
∅
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom & middle shelves.
Two (02) no. 1.2 mm thick door with handle &
locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 332 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-57
UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE:
Width:
Depth:
Height:
1550mm
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.45 k.w.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Unit installed below stone top counter by I.D
on plinth.
• All visible Exterior S.S Mirror finish to be
provided (to be confirm by I.D before
production)
• 0.9mm thick S.S. top.
• SS 304 interior and exterior.
• Six (6)no S.S Drawer with removable 1/1 G.N pans
insulation.
• With Levelers.
• Ambient temperature 43 deg C.
• Internal Temp 0 Deg C to 4 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A.
• Remote Compressor Housing.
• Digital read out thermometer, cord with time delay
auto start.
• Forced draft cooling.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating.(for condensate water
evaporation),
• Unit construction to be as per V cut Bending.
Power cord.
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
IGLU
WILLIAMS
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
CUSTOM BUILT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 333 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-58
SUSHI DISPLAY CABINET
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
1500mm
400mm
575mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
mm
Hot
∅
NA
mm
Waste
∅
NA
mm
ELECTRIC :
Power
0.5 H.P.
Voltage
220-50-1
SPECIFICATIONS
• Counter top model
• Remote Compressor.
• REFRIGERANT GAS: R-134 A.
• Rear and both sides glass.
• Glass sliding door
• Body color finish as per I.D.
• Interior floor has a radius in all four sides
• All visible Exterior S.S Mirror finish to be
provided (to be confirm by I.D before
production)
Gas:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
IGLU
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 334 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-59
UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE:
Width:
Depth:
Height:
1550mm
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.45 k.w.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Unit installed below stone top counter by I.D
on plinth.
• All visible Exterior S.S Mirror finish to be
provided (to be confirm by I.D before
production)
• 0.9mm thick S.S. top.
• SS 304 interior and exterior.
• Six (6)no S.S Drawer with removable 1/1 G.N pans
insulation.
• With Levelers.
• Ambient temperature 43 deg C.
• Internal Temp 0 Deg C to 4 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A.
• Remote Compressor Housing.
• Digital read out thermometer, cord with time delay
auto start.
• Forced draft cooling.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating.(for condensate water
evaporation),
• Unit construction to be as per V cut Bending.
Power cord.
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
IGLU
WILLIAMS
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
CUSTOM BUILT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 335 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-61
DROP IN REFRIGERATED ICE WELL WITH
SNEEZE GUARD
QUANTITY: 02
SIZE
Width:
Depth:
Height:
800mm
(Internal)
550mm
(Internal)
125mm
(Internal)
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
1”
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
0.25 H.P.
Voltage
220v-50c-1ph.
EXHAUST
NA
•
•
•
•
GAS:
BTU
NA
Con.
∅
Unit drop in I.D. stone top counter .
Lights as per I.D or Lighting Consultant.
Internal size 800 mm x550mm D x 125 High
1.2 mm thick cold pan with insulation and at all sides &
Drain outlet. .
Provide light arrangement , Led light all four sides in side
body. (Light as per I.D.)
Remote compressor
1.2mm thick S.S. perforated false bottom.
Approx 1000mm long x 450mm x 550mm high
sneeze guard mounted on 50mm dia round pipe
and suitable to secured I.D. stone top counter.
Top visible Exterior S.S Mirror finish to be provided
(Final finish to be confirm with I.D before
production)
ACCESSORIES:
Power cord
SPECIAL NOTE:
To be coordinated with ID for cut outs Shop drawing with
plan, elevation and section to be submitted for approval.
Finish to be co-ordinate with I.D
IGLU
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 336 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-62
GRAVITY SLICER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
710mm
762mm
660mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
ELECTRIC :
Power
0.35 K.W.
Voltage
220v-50c-1p
EXHAUST
•
•
NA
GAS:
BTU
NA
Con.
∅ NA
•
•
•
•
ACCESSORIES:
Motor: Knife motor is 1-speed, 1⁄2 HP totally enclosed and
permanently lubricated ball bearings, thermally protected. Table
motor is brushless DC providing three fixed speeds, 20, 40 or 60
slices per minute. Three stroke lengths in the automatic mode,
provide more slices/minute at the same speed.
Base, product table, pusher, support arm and upper housing are
constructed polymers reducing the number of seams. Gauge plate
and center plate are anodized aluminum. All controls are sealed
and located out of the drip zone.
13" (330 mm) diameter, hollow ground, hardened and polished
stainless steel.
Knife Sharpener: Removable and submersible table mounted, two
stone, dual action design to ensure correct pressure and contact
angle are always applied, thus reducing knife wear and delivering
a perfect edge. Borazon stones last longer, sharpen faster and
clean easier.
Thickness Control: Index knob controls a precision, variable pitch
barrel cam with ultra-fine adjustment in the first revolution and
opens to a thickness of 15⁄16" (34 mm) for accurate and
consistent slicing. This control is located out of the drip zone on
the upper left to provide quick and easy access for operation and
cleaning.
Product Table: Full gravity feed 45° angle with articulating rear
mounted pusher that runs the entire length of the table to secure
product for increased yield and consistency in every slice. A fence
provides stability for the product in automatic mode.
Kick Stand: An easy to use kick stand supports the slicer for easy
access to clean under the slicer.
Controls: Sealed push-button switches located on the index knob
housing out of the drip zone.
Low Fence, Product Tray
SPECIAL NOTE:
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
BERKEL
X13A-PLUS
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 337 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-66
CABINET WITH DROP IN SINK
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1800 mm
700mm
700mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Wast
e
∅
2”
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
•
•
•
•
•
•
0.9mm thick top SS
304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. full bottom shelf.
One (1) no. 1.6mm thick S.S. Sink of 400mm x
400mm x 200mm high with Drain Fitting. (Drop in
type)
Four (04) no. hinged door with integral Handle.
S.S. channel frame work.
Left side of top provide cut out as per modular
equipment drop in hand wash sink.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 338 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-66A
DROP IN HAND WASH SINK
QUANTITY: 01
Tentative Image
SIZE
Width
Depth:
Height:
385mm
385mm
180mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Wast
e
∅
1½”
ELECTRIC :
SPECIFICATIONS
•
•
•
•
Power
NA
•
Voltage
NA
•
Gas:
BTU
NA
Con.
∅
Equipment drop in I.D. Stone top Counter.
1.2 mm thick S.S. sink.
One (1) TEKA make Sink Size is 385 mm dia X 180
mm deep model is BE39.18 with Drain Fitting to be
provided.
Deck Mounted Sensor Operated Faucet: - Make is
TOTO and Model no is TS-191.
(1) Soap Dispenser Make is PONGCHAI and model is
402073.
Top visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
AS PER ABOVE SPECS
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 339 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-67
COMBI OVEN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
655 mm
555mm
567 mm
CAPACITY
6 x 2/3 GN PAN
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
Hot
∅
Waste
∅
¾”
(Purified)
2”
ELECTRIC :
Power
5.7 KW
Voltage
440v-50c-3p
EXHAUST
SPECIFICATIONS
• Electrically operated.
• Suitable for Steaming, Convection, Combi-steaming, VarioSteaming, Re-heating, Low temperature cooking, Core
temperature cooking.
• Stainless steel 304 throughout,
• Height adjustable legs.
• Double thermo-glazed door.
• Hand shower with continuously variable flow control
• Fan with auto-reverse.
• Shall be able to connected up to: PC-HACCP/PC-Control
• Control system with plain text display.
• Large, bright graphic display (optimum legibility).
• Pre-set start time in real-time mode.
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
Automatic cleaning program, Core temperature sensor, Retractable
hand shower.
SPECIAL NOTE:
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
RATIONAL
SCC XS
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 340 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-67A
WATER FILTER FOR COMBI OVEN
QUANTITY: 01
SIZE
Width:
Depth:
15"
7"
Height:
18.75”
CAPACITY
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
TEMPERATURE:
80°F(27°C)
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
SPECIFICATIONS
• Sophisticated Hydro blend compound prevents lime scale
formation in high temperature steam applications.
• Fine filters incoming water to improve the performance,
maximize energy efficiency and increase the life of steam
equipment.
• Reduces chlorine-induced corrosion.
• Longer lasting SS-10 cartridge, AR-X HOUSING.
• Dip Tube for scalekleen delimer.
• (2) ScaleKleen 7oz Packets (CT System)
• NSF certified scale stick.
• Inbuilt Preesure pump for adjustable water flow
• Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
• KLEENSTEAM plate mounted system include 4CB5 Filter
Cartridge (ct system)
• Operating Weight is 15 lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
• WATER FROM KLEENSTEAM SYSTEM SHOULD ONLY
BE CONNECTED TO THE BOILER FEED AND NOT TO
THE CONDENSATE CONNECTION OF THE STEAMER.
10-125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE KLEENSTEAM CT
EV-979750
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 341 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-68
UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE:
Width:
Depth:
Height:
1550mm
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.45 k.w.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Unit installed below stone top counter by I.D
on plinth.
• All visible Exterior S.S Mirror finish to be
provided (to be confirm by I.D before
production)
• 0.9mm thick S.S. top.
• SS 304 interior and exterior.
• Six (6)no S.S Drawer with removable 1/1 G.N pans
insulation.
• With Levelers.
• Ambient temperature 43 deg C.
• Internal Temp 0 Deg C to 4 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A.
• Remote Compressor Housing.
• Digital read out thermometer, cord with time delay
auto start.
• Forced draft cooling.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating.(for condensate water
evaporation),
• Unit construction to be as per V cut Bending.
Power cord.
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
IGLU
WILLIAMS
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
CUSTOM BUILT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 342 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-69
SALADETTE UNIT
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
980 mm
375 mm
241 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.25 H.P.
Voltage
220v.50c.1p.
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
• Table top
• 304 S/S interior and exterior
• 304 S/S at back
• S.S. 304 steel at base
• With hinged lid
• Accommodates Eight (08) 1/61 GN Pans
• Fitted with thermometer
• Adjustable thermostat
• Designed for 43°C Ambient Temperature
• Internal Temp +1 Deg C to +4 Deg C
• Copper tube cooling
• REFRIGERANT GAS: R-134 A
• Condensing unit aside
• Rounded edge for internal chamber
• Manual defrost
• Fitted with thermometer
•
All visible Exterior S.S Mirror finish to be
provided (to be confirm by I.D before
production)
ACCESSORIES:
SPECIAL NOTE:
WILLIAMS
IGLU
TW 9
equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 343 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-70
PIZZA OVEN
QUANTITY:01
SIZE
Width:
Depth:
Height:
1100 mm
1140 mm
1690mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
NA
Waste
∅
1½”
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ELECTRIC :
Power
22.0 K.W.
Voltage
440v-50c-3p
Gas:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
NA
•
Electrical operated Pizza Oven with Wood display
The Internal cooking surface to be of 850 mm x 850
mm
Unit furnished with 200mm high FLUE Collar.
Electrical control panel
Thermostat and indicators.
Capacity per hour of
70 no. of 200mm,
35 no. of 250mm,
25no. of 300mm,
10 no. of 400mm
Stainless Oven Mouth Lintel.
With internal spotlight.
Analogue Thermometer.
Cast iron log display.
Thermal Interlock Sensor.
Stainless Steel Oven Tool Set (with stainless steel hangers),
Stack-Mounted Exhaust Fan, Spray filter. Complete withSpark
arrestor
This item is located front of house & will be
highly visible , the finishing required must be
first class & will be required coordination with
the Interior designer/Interior contractor
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER.
BEECHOVENS
REC 0850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 344 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-71
CABINET WITH WASTE BIN
QUANTITY: 05
SIZE
Width:
Depth:
Height:
500mm
700mm
800mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
SPECIFICATIONS
•
•
•
Power
NA
•
•
•
Voltage
NA
•
ELECTRIC :
EXHAUST
NA
1.2mm thick S.S. cabinet
1.2 mm front panel with handle with approx 400mm x
150mm high flap for garbage entry.
Approx 450mm x 500mm x 500mm high, 1.2mm thick
S.S. garbage can, all corners coved.
Four (4) no. 102mm dia castor two with brakes.
Unit installed below stone top counter
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 345 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-72
CABINET WITH DROP IN SINK
QUANTITY: 01
SIZE
Width:
Depth:
Height:
600 mm
675mm
700mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Wast
e
∅
2”
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
•
•
•
•
•
0.9mm thick top SS
304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. full bottom shelf.
One (1) no. 1.6mm thick S.S. Sink of 400mm x
400mm x 200mm high with Drain Fitting. (Drop in
type)
One (01) no. hinged door with integral Handle.
S.S. channel frame work.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 346 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-73
UNDER COUNTER REFRIGERATOR
QUANTITY: 02
SIZE:
Width:
Depth:
Height:
1550mm
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.45 k.w.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Unit installed below stone top counter by I.D
on plinth.
• All visible Exterior S.S Mirror finish to be
provided (to be confirm by I.D before
production)
• 0.9mm thick S.S. top.
• SS 304 interior and exterior.
• Six (6)no S.S Drawer with removable 1/1 G.N pans
insulation.
• With Levelers.
• Ambient temperature 43 deg C.
• Internal Temp 0 Deg C to 4 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A.
• Remote Compressor Housing.
• Digital read out thermometer, cord with time delay
auto start.
• Forced draft cooling.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating.(for condensate water
evaporation),
• Unit construction to be as per V cut Bending.
Power cord.
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
IGLU
WILLIAMS
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
CUSTOM BUILT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 347 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-73A
UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE:
Width:
Depth:
Height:
1550mm
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.45 k.w.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Unit installed below stone top counter by I.D
on plinth.
• All visible Exterior S.S Mirror finish to be
provided (to be confirm by I.D before
production)
• 0.9mm thick S.S. top.
• SS 304 interior and exterior.
• Six (6)no S.S Drawer with removable 1/1 G.N pans
insulation.
• With Levelers.
• Ambient temperature 43 deg C.
• Internal Temp 0 Deg C to 4 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A.
• Remote Compressor Housing.
• Digital read out thermometer, cord with time delay
auto start.
• Forced draft cooling.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating.(for condensate water
evaporation),
• Unit construction to be as per V cut Bending.
Power cord.
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
IGLU
WILLIAMS
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
CUSTOM BUILT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 348 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-74A
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
Approx
1700mm
600mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
SPECIFICATIONS
•
•
•
•
•
Power
NA
•
Voltage
NA
•
Gas:
BTU
NA
Con.
∅
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom and middle shelves.
Three (03) no. 1.2 mm thick door with handle &
locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 349 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-75
DROP IN HOT PLATE
QUANTITY: 05
SIZE :
Width:
Depth:
Height:
1205 mm
500 mm
64 mm
CAPACITY
M.E.P REQUIREMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
1.2 KW
Voltage
220v-50c-1p
SPECIFICATIONS
• Drop in Unit
• With Black ceran pyroceramic top.
• Frame to be 304 S.S Construction.
• With mat type heating element.
• Thermostatically-controlled heating element.
• With insulation.
• Temperature to be adjustable up to maximum 122 Deg
Celsius.
• Flush Mount Electronic Control Box with Lighted On/Off
Rocker Switch.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
Accessories for installation & operation.
SPECIAL NOTE:
To be coordinated with ID for cut outs,
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDER.
PIPER BERKELEY SERIES
B26050
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 350 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-76
LIGHT BRIDGE WITH STRIP HEATER
QUANTITY: 05
SIZE
Width:
Depth:
Height:
APPROX
1350 mm
350 mm
350MM
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
•
SPECIFICATIONS
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
•
•
6mm thick Tempered glass.
S.S. cover (Mirror finish)
38m dia S.S. support (Mirror finish)
Sturdy continuous stainless steel housings.
Pre-focused heat.
Coated shatter-resistant incandescent lights
Include as standard equipment four stainless steel
shelf mounting tabs
an on-off switch to be installed to either the front or
rear of the unit.
The infrared heating element shall be tubular metal
sheathed.
ELECTRIC :
Power
0.6 K.W
Voltage
220V-50C-1P
EXHAUST
•
•
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Breath protector, cord and plug set, indicator light, and infinite
control built-in.
•
This item is located front of house & will be
highly visible , the finishing required must be
first class & will be required coordination with
the Interior designer.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
CUSTOM BUILT + HATCO
CUSTOM BUILT + GRN4-42
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 351 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-77
CARVING STATION WITH SNEEZE
GUARD
QUANTITY: 01
SIZE
Width:
Depth:
Height:
466 mm
658 mm
792mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
Ø
NA
Hot
Ø
NA
Waste
Ø
NA
•
•
•
•
•
•
•
ELECTRIC :
Power
0.5 KW
Voltage
220v-50c-1p
Table top equipment
Electrical operated
S.S. construction.
250 watt. heat lamp.
Clear glass breath sneeze guard.
Complete with control switch and indicator
Fixed lamp assembly
EXHAUST
NA
GAS:
BTU
NA
Con.
Ø
ACCESSORIES:
One (01) no. Cutting board size- 349mm x 406mm x
13mm.
SPECIAL NOTE:
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER.
ALTO-SHAAM
HATCO
CS-100S
EQUIVLANT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 352 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-78
CABINET WITH DROP IN SINK
QUANTITY: 01
SIZE
Width:
Depth:
Height:
500 mm
700mm
700mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Wast
e
∅
2”
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
•
•
•
•
•
0.9mm thick top SS
304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. full bottom shelf.
One (1) no. 1.6mm thick S.S. Sink of 350mm x
400mm x 200mm high with Drain Fitting. (Drop in
type)
One (01) no. hinged door with integral Handle.
S.S. channel frame work.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 353 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-81
UNDER COUNTER FREEZER
QUANTITY: 01
SIZE:
Width:
Depth:
Height:
1550mm
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.45 k.w.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Unit installed below stone top counter by I.D
on plinth.
• All visible Exterior S.S Mirror finish to be
provided (to be confirm by I.D before
production)
• 0.9mm thick S.S. top.
• SS 304 interior and exterior.
• Six (6)no S.S Drawer with removable 1/1 G.N pans
insulation.
• With Levelers.
• Ambient temperature 43 deg C.
• Internal temp is - 180 C to - 210 C).
• Air-cooled.
• REFRIGERANT GAS: R-134 A.
• Remote Compressor Housing.
• Digital read out thermometer, cord with time delay
auto start.
• Forced draft cooling.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating.(for condensate water
evaporation),
• Unit construction to be as per V cut Bending.
Power cord.
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
IGLU
WILLIAMS
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
CUSTOM BUILT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 354 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-82
DROP IN TWO ZONE INDUCTION RANGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
420 mm
770 mm
Approx
265mm
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
4.6 KW
Voltage
440-50-3P
SPECIFICATIONS
•
•
•
•
•
•
•
Electrically operated equipment.
Drop in Equipment.
Induction cooking top.
Two (02) Hob Induction,
Thermostat cut-off.
304 S.S Constructions.
With Control to be remote.
EXHAUST
GAS:
BTU
NA
Con.
∅ NA
ACCESSORIES:
SPECIAL NOTE:
• Power Cord & Plug.
Accessories for installation and operation.
Installations and Cut-outs to be coordinate with I.D. ID to
make provision for installing controls
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
MKN
1523108-00ZPO1
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 355 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-83
EXHAUST HOOD WITH UV GREASE
REMOVAL COMPLETE WITH DEMAND
CONTROL VENTILATION & FIRE
SUPRESSION SYSTEM
QUANTITY: 01
SIZE
Width
Depth
Height:
1550mm
1350mm
555mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅ NA
Wast
e
∅ NA
SPECIFICATIONS
•
•
ELECTRIC :
Power
0.5 K.W (for
light)
Voltage
220v-50c-1p
EXHAUST
•
1850 CFM
GAS:
BTU
NA
Con.
∅
KIT. EQPT. SPECS
INDIA
UAE
•
•
•
•
The kitchen canopy shall be constructed from 1.0 mm
AISI 304 stainless steel and shall be supplied complete
with grease filters (UL listed), pressure measurement
taps, exhaust adjustment systems. The canopy shall
be HACCP certified.
The system to include lightweight stainless steel UV
lamps cassettes, directly integrated in the exhaust
plenum, behind the double stage mechanical filtration.
Cassettes should be easily removable by disconnecting
the electrical connectors.
Outer casing panels to be constructed from AISI 304
stainless steel in a brushed satin finish, in a modular
Construction. The joints of the lower edge shall be
fully welded to be liquid-tight, avoiding harmful
dripping of condensation. All exposed welds should be
ground and polished to the metal’s original finish.
The bottom edge of the exhaust plenum should be
aerodynamically designed (no flat surface).
Canopy ends shall be of double-sidewall construction.
Exhaust
The exhaust air flow will be based on the convective
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 356 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
•
•
•
•
•
KIT. EQPT. SPECS
INDIA
UAE
heat generated by the appliances under each canopy.
Submittal shall include convective heat calculations
based on the input power of the appliances served.
Grease filters
The canopy shall be equipped with a stainless steel
grease filter. The grease removal efficiency should be
95% for particles a diameter of 10 microns or larger.
The filter shall be NSF and UL classified. Baffle or slot
type grease filters shall not be used.
Exhaust Balancing dampers
Every spigot connections for extracted air shall be
supplied with an automated motorized balancing
damper. The damper shall automatically adjust
exhaust airflow based on direct pressure readings
from integral T.A.B test and balance port in the hood.
The Model ABD will have night time setback feature
which will automatically close the damper when the
exhaust system is shut down to prevent outside air
from migrating into the space. The Model ABD should
fail safe open on power interruption.
The damper outer casing shall be constructed of
continuously welded 1.2mm thick S.S.including the
balancing blades. Adjustment of the parallel dampers
(in open position) will be achieved by manually turning
the locking adjustment bracket until the desired
pressure reading is achieved.
Light Fixtures
Each canopy shall be provided with a LED light fixture
to provide approx. 500 lux at the cooking appliances
work surface. The light is protected with a stainless
steel hatch with plain milled finish, surrounded by a
tempered-glass light diffuser (the heat tolerance of the
glass shall be -40 to 300 °C).
Demand Control Ventilation
The system to come equipped with hood mounted
infrared cooking activity sensors capable of measuring
appliance surface temperatures. Infrared sensor will
read appliance surface temperature which will be
translated by the specific calculation algorithm for that
appliance and will respond proactively to any change
in cooking status. Infrared sensor and exhaust collar
mounted temperature sensor work in concert on
differential temperature reading back to the controller.
The system shall automatically control the speed of
the exhaust fan (and supply fan if applicable) based
on appliances status, cooking activities and exhaust air
temperatures. The system can be controlled with
either manual On/Off switch, a 24hrs automated
schedule with a manual override function, or the
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 357 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
hoods can be automatically regulated based on the
appliance status. The integrated PLC will analyze
signals from the cooking activity sensors, temperature
sensors and pressure transducers mounted in the
hood and then send a signal to the VFD(to be
provided by HVAC contractor) to adjust the exhaust
fan (and supply fan if applicable) speed to satisfy
current cooking load conditions, as well adjust the
automated balancing dampers accordingly. The
system can be monitored and controlled with an
internet connected PC from either a local or remote
location.
Fire Suppression system
Provide an automatic, water-assisted, wet chemical,
fire suppression System with provision of manual pull
station to be located in a path of egress at a maximum
height of 60 inches above the floor.Unit to be provided
with nozzles for equipment protection, plenum
protection and duct protection.Should provide 100%
protection as required by codes, standards, national,
state, and local requirements.Provide fusible links in
each exhaust duct cut-out and at a maximum gap of 2
feet (610mm) between them.Unit to be provided with
water inlet which would be connected to the fire pipe
line.Stainless steel pipe drops to be provided to the
discharge nozzles and plenum both. Discharge nozzles
should not exceed 610mm from each other.The
system, including all of its components, shall be UL
Standard 300/ ULC Standard ORD-C1254.6 Listed.
Automatic actuation shall be initiated by separation of
fusible links. Fusible link break temperature should be
as per the equipment below the same.
Distance of cylinder assembly & pull down points as
per lay out plan.
Unit should be complete of Gas shut off valve,
Disconnect system for Electrical equipment, Hood light
(incase of same is in a non fire rated enclosure,
Disconnect hvac system.
ACCESSORIES:
Standard accessories for installation, operations and
maintenance to be provided.
SAFETY NORMS:
UV access door closing and filters presence shall be
permanently controlled with maintenance free magnetic
proximity switches (automatic and immediate UV lamps
switch off).
• Each UV canopy section is equipped with a plug and play UV
module, integrated behind the light casing, ease of access
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 358 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
using the light hatch. Each UV module shall communicate with
a UV control panel, integrated in one of the canopy section.
The control panel displays warnings or
potential working defaults and shall be able to identify on
which canopy section where they occur and, if needed, which
ballast or lamps are concerned.
SPECIAL NOTE:
•
•
•
Fire suppression system should be installed by a certified vendor
and all testing and commissioning certificated needs to be
provided.
Minimum of five (05) years maintenance contract should be there
between the client and the fire suppression system vendor for
periodic maintenance inclusive cylinder and accessories as per fire
norms.
Detail provided in this specification in terms of number of Nozzles,
ducts cut outs , distance of unit etc. needs to be coordinated and
verified by Vendor. Any Deviation from above mention and
specification to be brought to the notice else it is expected that the
vendor in following complete specification as mentioned above.
HVAC Cutouts and fresh air cutouts to be coordinated with HVAC consultant. Shop drawing
with plan, elevation and section to be submitted for approval.
HALTON+ANSUL
UVI-S + MARVEL+(P07)
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 359 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-84
DROP IN REFRIGERATED ICE WELL
QUANTITY: 03
SIZE
Width:
Depth:
Height:
310mm(Inte
rnal)
510mm(Inter
nal)
125mm
(Internal)
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
SPECIFICATIONS
Cold
∅
NA
Hot
∅
NA
•
•
•
Waste
∅
1”
•
ELECTRIC :
•
Power
0.25 H.P.
Voltage
220v-50c-1ph.
EXHAUST
•
•
•
Unit drop in I.D. stone top counter .
Lights as per I.D or Lighting Consultant.
Internal size Approx 310 mm x 510mm D x 125 High
(suitable tor six (06) no. GN. 1/6 pan.
1.2 mm thick cold pan with insulation and at all sides &
Drain outlet. .
Provide light arrangement , Led light all four sides in side
body. (Light as per I.D.)
Remote compressor
1.2mm thick S.S. perforated false bottom.
Provide removable S.S. for GN. pan rest/Holding
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
Power cord
SPECIAL NOTE:
To be coordinated with ID for cut outs Shop drawing with
plan, elevation and section to be submitted for approval.
Finish to be co-ordinate with I.D
IGLU
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 360 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-85
DROP IN CHAR GRILL
QUANTITY: 01
SIZE
Width:
Depth:
Height:
480 mm
620mm
392mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
7.0 KW
Voltage
440v-50c-3p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
• Electrically operated equipment.
• Drop in Equipment.
• Removable C.I Grill on top.
• heating zone
• Grill Surface
• Very quick heat-up time to maximum temperature.
• Thermostat Cut-off.
• Overheat Shut off.
NA
ACCESSORIES:
Two cast iron grill, Splash guard
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing
with plan, elevation and section to be submitted for approval.
MKN
----
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 361 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-87
DROP
IN
WARMING
BAMBOO
STEAMER
FOR
QUANTITY: 01
SIZE
Width:
Depth:
Height:
700mm
(internal)
500mm
(Internal)
300mm
CAPACITY
M.E.P REQUIREMENT
PLUMBING :
SPECIFICATIONS
Cold
∅
½”
•
Hot
∅
NA
•
Wast
e
∅
2”
ELECTRIC :
Power
2.0 K.W
Voltage
220v-50c-1p
•
•
•
•
•
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
•
•
•
•
•
•
Equipment suitable to drop in I.D. stone top
counter.
All top visible S.S Mirror finish to be provided
(Final finish to be confirm with I.D before
production)
1.6mm thick approx 200mm deep S.S. pan with 25mm
thick insulation at all sides
S.S. Collar all four sides
1.6mm thick top cover with Holes as per operator
requirements.
Electrical operated
Top of unit Cut-Outs to be confirmed by operator on
S.S Sheet for Bamboo Steamer Warming.
Automatic Water refill.
Heating Element
Thermostat Cut-Off.
Low Water Cut-Off.
25mm thick insulation.
Six (06) No. of dim sum baskets as extra optional
accessories.
ACCESSORIES:
Accessories for installation & operation.
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDER
YPT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 362 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-89
MOBILE INGREDIENT BINS
QUANTITY: 02
SIZE
Width:
Depth:
Height:
419 mm
749 mm
711 mm
CAPACITY
Sugar-226 lbs/Flour-150 Lbs.
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
NA
Hot
ᴓ
NA
Waste
ᴓ
NA
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
• Design of lid encourages spilled liquids to drain off back lid while
protecting contents. Two-piece lid comes apart for easy cleaning.
• The break-resistant, polycarbonate lids are clear to easily identify
contents.
• A convenient S-hook is provided on the front edge for hanging
Scoop.
• Heavy-duty 3" (76 cm) non-marking casters, 2 front swivel, 2 rear
fixed for easy maneuvering.
EXHAUST
NA
GAS:
BTU
NA
Con.
ᴓ
ACCESSORIES:
Unit Complete with Scoop and Scoop Holder.
SPECIAL NOTE:
.
CAMBRO
HUPFER
IBS27
MTW/K 0124292
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 363 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-90
DIMSUM STEAMER
QUANTITY: 01
Tentative Image
SIZE
Width:
Depth:
Height:
750mm
600mm
750mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
NA
Waste
∅
2”
SPECIFICATIONS
ELECTRIC :
Power
0.5 K.W
Voltage
220v-50c-1p
•
•
•
•
•
•
•
•
•
EXHAUST
•
NA
Equipment suitable to be mounted masonry plinth
Gas operated
Full 304 AISI S.S. Construction,
One (1) no approx 400mm dia cooking base
high pressure Burners.
Piezo ignition.
Flame failure device.
In build pressure regulator.
Four (04) nos. steamer pan containers with perforated
base, of stackable design with S.S. rod handles and
Stainless Steel removable dim sum insert pans.
One (1) no. welded Stainless Steel lid,
GAS:
BTU
1,10,000
Con.
∅
¾”
mm
ACCESSORIES:
Accessories for installation & operation.
SPECIAL NOTE:
Equipment Exterior finish and Colors as per I.D. , Shop
drawing with plan, elevation and section to be submitted
for approval and I.D. coordination.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
YPT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 364 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-91
NOODLE BOILER
QUANTITY: 01
Tentative Image
SIZE
Width:
Depth:
Height:
750mm
600mm
750mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
Ø
1/2"
Hot
Ø
NA
Waste
Ø
2"
•
•
•
•
ELECTRIC :
Power
0.5 KW
Voltage
220v-50c-1p
EXHAUST
•
•
•
•
•
Equipment suitable to be mounted masonry
plinth
Gas Operated
Full S.S. 304 Construction,
Approx 500mm Dia Noodle boiling pan with cross
Partition as shown in Picture.
All sides Insulation
Complete with S.S. baskets.
Piezo ignition.
Flame failure device.
In build pressure regulator.
NA
GAS:
BTU
40,000
Con.
Ø
3/4"
ACCESSORIES:
Accessories for installation & operation.
SPECIAL NOTE:
Equipment Exterior finish and Colors as per I.D. , Shop
drawing with plan, elevation and section to be
submitted for approval and I.D. coordination.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER.
YPT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 365 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-92
EXHAUST HOOD WITH UV GREASE
REMOVAL COMPLETE WITH DEMAND
CONTROL VENTILATION & FIRE
SUPRESSION SYSTEM
QUANTITY: 01
SIZE
Width
Depth
Height:
2100mm
1350mm
555mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅ NA
Wast
e
∅ NA
SPECIFICATIONS
•
•
ELECTRIC :
Power
0.5 K.W (for
light)
Voltage
220v-50c-1p
EXHAUST
•
1,250 CFM
GAS:
BTU
NA
Con.
∅
KIT. EQPT. SPECS
INDIA
UAE
•
•
•
•
The kitchen canopy shall be constructed from 1.0 mm
AISI 304 stainless steel and shall be supplied complete
with grease filters (UL listed), pressure measurement
taps, exhaust adjustment systems. The canopy shall
be HACCP certified.
The system to include lightweight stainless steel UV
lamps cassettes, directly integrated in the exhaust
plenum, behind the double stage mechanical filtration.
Cassettes should be easily removable by disconnecting
the electrical connectors.
Outer casing panels to be constructed from AISI 304
stainless steel in a brushed satin finish, in a modular
Construction. The joints of the lower edge shall be
fully welded to be liquid-tight, avoiding harmful
dripping of condensation. All exposed welds should be
ground and polished to the metal’s original finish.
The bottom edge of the exhaust plenum should be
aerodynamically designed (no flat surface).
Canopy ends shall be of double-sidewall construction.
Exhaust
The exhaust air flow will be based on the convective
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 366 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
•
•
•
•
•
KIT. EQPT. SPECS
INDIA
UAE
heat generated by the appliances under each canopy.
Submittal shall include convective heat calculations
based on the input power of the appliances served.
Grease filters
The canopy shall be equipped with a stainless steel
grease filter. The grease removal efficiency should be
95% for particles a diameter of 10 microns or larger.
The filter shall be NSF and UL classified. Baffle or slot
type grease filters shall not be used.
Exhaust Balancing dampers
Every spigot connections for extracted air shall be
supplied with an automated motorized balancing
damper. The damper shall automatically adjust
exhaust airflow based on direct pressure readings
from integral T.A.B test and balance port in the hood.
The Model ABD will have night time setback feature
which will automatically close the damper when the
exhaust system is shut down to prevent outside air
from migrating into the space. The Model ABD should
fail safe open on power interruption.
The damper outer casing shall be constructed of
continuously welded 1.2mm thick S.S.including the
balancing blades. Adjustment of the parallel dampers
(in open position) will be achieved by manually turning
the locking adjustment bracket until the desired
pressure reading is achieved.
Light Fixtures
Each canopy shall be provided with a LED light fixture
to provide approx. 500 lux at the cooking appliances
work surface. The light is protected with a stainless
steel hatch with plain milled finish, surrounded by a
tempered-glass light diffuser (the heat tolerance of the
glass shall be -40 to 300 °C).
Demand Control Ventilation
The system to come equipped with hood mounted
infrared cooking activity sensors capable of measuring
appliance surface temperatures. Infrared sensor will
read appliance surface temperature which will be
translated by the specific calculation algorithm for that
appliance and will respond proactively to any change
in cooking status. Infrared sensor and exhaust collar
mounted temperature sensor work in concert on
differential temperature reading back to the controller.
The system shall automatically control the speed of
the exhaust fan (and supply fan if applicable) based
on appliances status, cooking activities and exhaust air
temperatures. The system can be controlled with
either manual On/Off switch, a 24hrs automated
schedule with a manual override function, or the
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 367 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
hoods can be automatically regulated based on the
appliance status. The integrated PLC will analyze
signals from the cooking activity sensors, temperature
sensors and pressure transducers mounted in the
hood and then send a signal to the VFD(to be
provided by HVAC contractor) to adjust the exhaust
fan (and supply fan if applicable) speed to satisfy
current cooking load conditions, as well adjust the
automated balancing dampers accordingly. The
system can be monitored and controlled with an
internet connected PC from either a local or remote
location.
Fire Suppression system
Provide an automatic, water-assisted, wet chemical,
fire suppression System with provision of manual pull
station to be located in a path of egress at a maximum
height of 60 inches above the floor.Unit to be provided
with nozzles for equipment protection, plenum
protection and duct protection.Should provide 100%
protection as required by codes, standards, national,
state, and local requirements.Provide fusible links in
each exhaust duct cut-out and at a maximum gap of 2
feet (610mm) between them.Unit to be provided with
water inlet which would be connected to the fire pipe
line.Stainless steel pipe drops to be provided to the
discharge nozzles and plenum both. Discharge nozzles
should not exceed 610mm from each other.The
system, including all of its components, shall be UL
Standard 300/ ULC Standard ORD-C1254.6 Listed.
Automatic actuation shall be initiated by separation of
fusible links. Fusible link break temperature should be
as per the equipment below the same.
Distance of cylinder assembly & pull down points as
per lay out plan.
Unit should be complete of Gas shut off valve,
Disconnect system for Electrical equipment, Hood light
(incase of same is in a non fire rated enclosure,
Disconnect hvac system.
ACCESSORIES:
Standard accessories for installation, operations and
maintenance to be provided.
SAFETY NORMS:
UV access door closing and filters presence shall be
permanently controlled with maintenance free magnetic
proximity switches (automatic and immediate UV lamps
switch off).
• Each UV canopy section is equipped with a plug and play UV
module, integrated behind the light casing, ease of access
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 368 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
using the light hatch. Each UV module shall communicate with
a UV control panel, integrated in one of the canopy section.
The control panel displays warnings or
potential working defaults and shall be able to identify on
which canopy section where they occur and, if needed, which
ballast or lamps are concerned.
SPECIAL NOTE:
•
•
•
Fire suppression system should be installed by a certified vendor
and all testing and commissioning certificated needs to be
provided.
Minimum of five (05) years maintenance contract should be there
between the client and the fire suppression system vendor for
periodic maintenance inclusive cylinder and accessories as per fire
norms.
Detail provided in this specification in terms of number of Nozzles,
ducts cut outs , distance of unit etc. needs to be coordinated and
verified by Vendor. Any Deviation from above mention and
specification to be brought to the notice else it is expected that the
vendor in following complete specification as mentioned above.
HVAC Cutouts and fresh air cutouts to be coordinated with HVAC consultant. Shop drawing
with plan, elevation and section to be submitted for approval.
HALTON+ANSUL
UVI+ MARVEL+(P7)
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 369 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-93
DROP IN REFRIGERATED ICE WELL
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1150mm(Int
ernal)
225mm(Inter
nal)
125mm
(Internal)
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
1”
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
0.25 H.P.
Voltage
220v-50c-1ph.
EXHAUST
•
•
•
Unit drop in I.D. stone top counter .
Lights as per I.D or Lighting Consultant.
Internal size Approx 1150 mm x 225mm D x 125 High
1.2 mm thick cold pan with insulation and at all sides &
Drain outlet. .
Provide light arrangement , Led light all four sides in side
body. (Light as per I.D.)
Remote compressor
1.2mm thick S.S. perforated false bottom.
Provide removable S.S. for GN. pan rest/Holding
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
Power cord
SPECIAL NOTE:
To be coordinated with ID for cut outs Shop drawing with
plan, elevation and section to be submitted for approval.
Finish to be co-ordinate with I.D
IGLU
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 370 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-95
RECTRACTABLE HEAT LAMP
QUANTITY: 02
SIZE
Dia:
Depth:
267 mm
--
CAPACITY
Height:
990 to
1765 mm
250 Watt
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
SPECIFICATIONS
• lamp bulb heating rated of 250 watt each
• Remote Operated Switch.
• Cord length Adjustable from 39” to 69 -½”
• Bulb Color to be confirmed by I.D.
• Outer finish to be confirmed by I.D.
ELECTRIC :
Power
0.25 KW.
Voltage
220v-50c-1p
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
Accessories for installation and operation.
SPECIAL NOTE:
Outer shade to be Confirmed by I.D.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER.
HATCO
DLH-775-RL
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 371 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-96
SINGLE TOP COOKING BATTERY
QUANTITY: 01
SIZE
Width:
Depth:
Height:
3700mm
1800mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
1/2"
Hot
∅
NA
Waste
∅
2"
SPECIFICATIONS
Custom built , Single top installation constructed of S.S. finish
heavy duty 3.0mm thick work top , Complete with S.s. heavy
duty S.S. fame work & base plinth with all sides S.S. heavy
duty kick plate.
ITEM # AD-96A GRIDDLE PLATE (GAS OPERATED)
ELECTRIC :
Power
15.3 K.W.
Voltage
440v-50c-3p
EXHAUST
NA
GAS:
BTU
Con.
∅
KIT. EQPT. SPECS
INDIA
UAE
¾”
350,
000
1xGas Griddle top, Approx 730mm wide x 610mm cooking
surface, 1/2 smooth 1/2 ribbed and open hygienic base steel
cooking surface with 18mm thick bottom plate. The plate with
a flat cooking surface slightly sloped towards the removable
drip tray. Thermostatically controlled stainless steel burners.
burner to be protected by a flame failure device. Unit to be
equipped with piezo ignition and an indicator lamp which
shows when it is ready for use. Base compartment with large
round edges.. One no. plate scraper with brush, Bottom of
unit provide Hinged shutter with handle. Gas BTU: 57000.
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 372 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM # AD-96B FOUR OPEN BURNER RANGE (GAS
OPERATED)
Four (04) no. Cast iron pan support, with long center fins.
Removable pan supports, burner rings and flame ignition
components. Manual gas valves with fixed high and low
positions. Gas main valve to be built in. With Flame failure
device, Piezo Ignition, Inbuilt pressure control regulator,
Bottom of unit provide Hinged shutter with handle. Total Gas
BTU: 98000.
ITEM#
AD-96C
OPERATED)
SALAMANDER
(ELECTRICAL
Provide suitable mounting arrangement, Mounted approx
525mm above working top. Elec. heated , Vertically movable
top. Two independent heating zones with separate controls.
With pull out drip tray. Variable height level 160mm. Power
regulator radiating heating element. Unit complete with 1 wall
console with integrated panel. Total electrical power: 3.3 KW,
220v-50c-1p.
ITEM# AD-96D S.S. GRID SHELF
•
One (01) no. approx 2800m long x 400mm S.S. over
shelves As shown, Mounted on 525mm above working
top.
ITEM # AD-96E FRY TOP (GAS OPERATED)
1x Gas fry top, Approx 730mm wide x 610mm cooking
surface, smooth plate and open hygienic base steel cooking
surface with 18mm thick bottom plate. The plate with a flat
cooking surface slightly sloped towards the removable drip
tray. Thermostatically controlled stainless steel burners.
burner to be protected by a flame failure device. Unit to be
equipped with piezo ignition and an indicator lamp which
shows when it is ready for use. Base compartment with large
round edges.. One no. plate scraper with brush, Bottom of
unit provide Hinged shutter with handle. Gas BTU: 57000.
ITEM # AD-96F DEEP FAT FRYER
OPERATED)
(ELECTRICAL
2 X 12.5 Ltrs. Electric Fryer, independently controlled Vshaped, pressed wells with rounded corners and expansion
zone at the top. Thermostatic regulation of the oil
temperature up to max. 185°C. Oil cleaning device located in
the compartment below the wells. With water resistant, With
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 373 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
Tilting type heating elements, Supplied with 2 no frying
baskets with insulated handles, 2 no lids, Oil clarifying tray,
Oil receptacle and 2 no basket rest grids., Bottom of unit
provide Hinged shutter with handle Total electrical power:
12.0 k.w.
ITEM # AD-96G SOLID TOP RANGE (GAS OPERATED)
Approx 800mm x 610mm , M.S. solid top, Four no. cooking
surface , Each surface independent control, each zone temp.
100deg. C to 450 deg. C., Joint free large cooking zone to be
provide, Piezo Ignition. Built in pressure control regulator,
Burner rated Approx 40,000 btu’s/hr., One no. plate scraper
with brush, Bottom of unit provide Hinged shutter with handle
ITEM # AD-96H FOUR OPEN BURNER RANGE (GAS
OPERATED)
Four (04) no. Cast iron pan support, with long center fins.
Removable pan supports, burner rings and flame ignition
components. Manual gas valves with fixed high and low
positions. Gas main valve to be built in. With Flame failure
device, Piezo Ignition, Inbuilt pressure control regulator,
Bottom of unit provide Hinged shutter with handle. Total Gas
BTU: 98000.
AMBIENT TOPS
Balance work area as shown in lay out plan between two
equipments provide below S.S. hinged door with handle.
ACCESSORIES:
Stainless steel end panels, 1xTechnical compartment for electrical,
1xMechanical compartment for elect. & plumbing, All Control Knob
to be S.S and All Doors S.S handle.
SPECIAL NOTE:
Colors as per I.D. , Shop drawing with plan, elevation and
section to be submitted for approval and I.D. coordination.
MKN
KUTCHEN MEISTER
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 374 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-97
EXHAUST HOOD WITH UV GREASE
REMOVAL COMPLETE WITH DEMAND
CONTROL VENTILATION & FIRE
SUPRESSION SYSTEM
QUANTITY: 01
SIZE
Width
Depth
Height:
4100mm
2500mm
555mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅ NA
Wast
e
∅ NA
SPECIFICATIONS
•
•
ELECTRIC :
Power
0.5 K.W (for
light)
Voltage
220v-50c-1p
EXHAUST
•
7,850 CFM
GAS:
BTU
NA
Con.
∅
KIT. EQPT. SPECS
INDIA
UAE
•
•
•
•
The kitchen canopy shall be constructed from 1.0 mm
AISI 304 stainless steel and shall be supplied complete
with grease filters (UL listed), pressure measurement
taps, exhaust adjustment systems. The canopy shall
be HACCP certified.
The system to include lightweight stainless steel UV
lamps cassettes, directly integrated in the exhaust
plenum, behind the double stage mechanical filtration.
Cassettes should be easily removable by disconnecting
the electrical connectors.
Outer casing panels to be constructed from AISI 304
stainless steel in a brushed satin finish, in a modular
Construction. The joints of the lower edge shall be
fully welded to be liquid-tight, avoiding harmful
dripping of condensation. All exposed welds should be
ground and polished to the metal’s original finish.
The bottom edge of the exhaust plenum should be
aerodynamically designed (no flat surface).
Canopy ends shall be of double-sidewall construction.
Exhaust
The exhaust air flow will be based on the convective
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 375 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
•
•
•
•
•
KIT. EQPT. SPECS
INDIA
UAE
heat generated by the appliances under each canopy.
Submittal shall include convective heat calculations
based on the input power of the appliances served.
Grease filters
The canopy shall be equipped with a stainless steel
grease filter. The grease removal efficiency should be
95% for particles a diameter of 10 microns or larger.
The filter shall be NSF and UL classified. Baffle or slot
type grease filters shall not be used.
Exhaust Balancing dampers
Every spigot connections for extracted air shall be
supplied with an automated motorized balancing
damper. The damper shall automatically adjust
exhaust airflow based on direct pressure readings
from integral T.A.B test and balance port in the hood.
The Model ABD will have night time setback feature
which will automatically close the damper when the
exhaust system is shut down to prevent outside air
from migrating into the space. The Model ABD should
fail safe open on power interruption.
The damper outer casing shall be constructed of
continuously welded 1.2mm thick S.S. including the
balancing blades. Adjustment of the parallel dampers
(in open position) will be achieved by manually turning
the locking adjustment bracket until the desired
pressure reading is achieved.
Light Fixtures
Each canopy shall be provided with a LED light fixture
to provide approx. 500 lux at the cooking appliances
work surface. The light is protected with a stainless
steel hatch with plain milled finish, surrounded by a
tempered-glass light diffuser (the heat tolerance of the
glass shall be -40 to 300 °C).
Demand Control Ventilation
The system to come equipped with hood mounted
infrared cooking activity sensors capable of measuring
appliance surface temperatures. Infrared sensor will
read appliance surface temperature which will be
translated by the specific calculation algorithm for that
appliance and will respond proactively to any change
in cooking status. Infrared sensor and exhaust collar
mounted temperature sensor work in concert on
differential temperature reading back to the controller.
The system shall automatically control the speed of
the exhaust fan (and supply fan if applicable) based
on appliances status, cooking activities and exhaust air
temperatures. The system can be controlled with
either manual On/Off switch, a 24hrs automated
schedule with a manual override function, or the
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 376 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
hoods can be automatically regulated based on the
appliance status. The integrated PLC will analyze
signals from the cooking activity sensors, temperature
sensors and pressure transducers mounted in the
hood and then send a signal to the VFD(to be
provided by HVAC contractor) to adjust the exhaust
fan (and supply fan if applicable) speed to satisfy
current cooking load conditions, as well adjust the
automated balancing dampers accordingly. The
system can be monitored and controlled with an
internet connected PC from either a local or remote
location.
Fire Suppression system
Provide an automatic, water-assisted, wet chemical,
fire suppression System with provision of manual pull
station to be located in a path of egress at a maximum
height of 60 inches above the floor.Unit to be provided
with nozzles for equipment protection, plenum
protection and duct protection.Should provide 100%
protection as required by codes, standards, national,
state, and local requirements.Provide fusible links in
each exhaust duct cut-out and at a maximum gap of 2
feet (610mm) between them.Unit to be provided with
water inlet which would be connected to the fire pipe
line.Stainless steel pipe drops to be provided to the
discharge nozzles and plenum both. Discharge nozzles
should not exceed 610mm from each other.The
system, including all of its components, shall be UL
Standard 300/ ULC Standard ORD-C1254.6 Listed.
Automatic actuation shall be initiated by separation of
fusible links. Fusible link break temperature should be
as per the equipment below the same.
Distance of cylinder assembly & pull down points as
per lay out plan.
Unit should be complete of Gas shut off valve,
Disconnect system for Electrical equipment, Hood light
(incase of same is in a non fire rated enclosure,
Disconnect hvac system.
ACCESSORIES:
Standard accessories for installation, operations and
maintenance to be provided.
SAFETY NORMS:
UV access door closing and filters presence shall be
permanently controlled with maintenance free magnetic
proximity switches (automatic and immediate UV lamps
switch off).
• Each UV canopy section is equipped with a plug and play UV
module, integrated behind the light casing, ease of access
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 377 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
using the light hatch. Each UV module shall communicate with
a UV control panel, integrated in one of the canopy section.
The control panel displays warnings or
potential working defaults and shall be able to identify on
which canopy section where they occur and, if needed, which
ballast or lamps are concerned.
SPECIAL NOTE:
•
•
•
Fire suppression system should be installed by a certified vendor
and all testing and commissioning certificated needs to be
provided.
Minimum of five (05) years maintenance contract should be there
between the client and the fire suppression system vendor for
periodic maintenance inclusive cylinder and accessories as per fire
norms.
Detail provided in this specification in terms of number of Nozzles,
ducts cut outs , distance of unit etc. needs to be coordinated and
verified by Vendor. Any Deviation from above mention and
specification to be brought to the notice else it is expected that the
vendor in following complete specification as mentioned above.
HVAC Cutouts and fresh air cutouts to be coordinated with HVAC consultant. Shop drawing
with plan, elevation and section to be submitted for approval.
HALTON+ANSUL
UVI+
MARVEL+(P07+P07+P10)
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 378 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-98
INCOGNEETO INDUCTION PLATE
QUANTITY: 02
SIZE:
Width:
Depth:
502 mm
Height:
444 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
105 mm
SPECIFICATIONS
•
Cold
∅
NA
Hot
∅
NA
•
Wast
e
∅
NA
•
ELECTRIC :
Power
0.65 K.W
Voltage
220v-50c-1p
EXHAUST
•
•
NA
GAS:
•
BTU
NA
Con.
∅
mm
•
•
•
•
Under counter-top design, aluminum housing, heavy
duty energy efficient electronics, and polycarbonate
top.
Mounts to underside of counter-top on fixed position
Track system - 18.4” (468mm) supplied.
Units require CookTek Magneeto™ 2 trivet (patent pending)
- included and standard induction compatible chafing
dishes. Magneeto™ 2 acts as a temperature sensor,
communicator, and locator device which allows heating of
induction compatible dishes through standard counter-top
Temperature selected via control panel, or Magneeto™ 2
can be programmed via keypad to preset a temperature for
automatic control
Automatic pan detection allows for instant energy
transmission to pan, and almost no energy consumption
when pan is not present
Maximum temperature limit prevents damage to chafing
dishes, keeps food in the “safe zone,” and keeps operations
within ventilation code.
Auto shut-off to prevent overheating, self-diagnostics, and
pan.
LCD Display for Precise feedback of temperature.
Unit shall have LCD display panel and capacitive touch
For precise user feedback.
Dish shall be constructed of a stainless steel exterior with a
glass window in the lid for easy viewing. Dish shall come
equipped with remote temperature sensor, side vents for
optimum ventilation, an adjustable rate slow-closing lid,
stainless steel spoon holder, and one single-chamber
stainless steel insert.
Dish intended for use on induction buffet units.
ACCESSORIES:
SPECIAL NOTE:
To be coordinated with ID for Under Neath mounting.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER.
COOK-TEK
B652-U
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 379 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-99
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
Approx
1050mm
700mm
Approx
mm
600
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
SPECIFICATIONS
•
•
•
•
•
Power
NA
•
Voltage
NA
•
Gas:
BTU
NA
Con.
∅
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom & middle shelves.
Two (02) no. 1.2 mm thick door with handle &
locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 380 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-99A
CABINET WITH STORAGE
QUANTITY: 02
SIZE
Width:
Depth:
Height:
Approx
950mm
700mm
Approx
mm
700
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
SPECIFICATIONS
•
•
•
•
•
Power
NA
•
Voltage
NA
•
Gas:
BTU
NA
Con.
∅
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom & middle shelves.
Two (02) no. 1.2 mm thick door with handle &
locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 381 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-101
CHINESE WOK RANGE
QUANTITY: 01
SIZE:
Width:
Depth:
Height:
2100mm
900mm
810mm+9
0mm
Splash.
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
(2)½”
Hot
∅
NA
Waste
∅
1”
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ELECTRIC :
Power
0.2
Voltage
220.50.21
EXHAUST
NA
GAS:
BTU
220000
Con.
∅ ¾”
Free Standing Chinese Wok.
90mm High Rear splash.
Full 304 AISI S.S. Construction,
Two (2) no 400mm dia pan support with high pressure
burner & one (1) no. water pan
Blower
Piezo ignition.
Flame failure device.
Flat base for Plinth Installation
Front full covered with louvers.
Rear and both sides # 20 G.A S.S Cladding.
(2) Gooseneck Deck Mounted mixer Water Faucet.
Rear side of unit to be flushed with wall.
Water control at front
Bottom balance S.S. cladding/Door with louvers
S.S. plinth base
mm
ACCESSORIES:
Accessories for installation & operation.
SPECIAL NO22TE:
Part of Cooking Battery. Finish should be match with
adjoining equipment. Shop drawing with plan, elevation
and section to be submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
YPT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 382 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-103
EXHAUST HOOD WITH UV GREASE
REMOVAL COMPLETE WITH DEMAND
CONTROL VENTILATION & FIRE
SUPRESSION SYSTEM
QUANTITY: 01
SIZE
Width
Depth
Height:
2350mm
1550mm
555mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅ NA
Wast
e
∅ NA
SPECIFICATIONS
•
•
ELECTRIC :
Power
0.5 K.W (for
light)
Voltage
220v-50c-1p
EXHAUST
•
4,000 CFM
GAS:
BTU
NA
Con.
∅
KIT. EQPT. SPECS
INDIA
UAE
•
•
•
•
The kitchen canopy shall be constructed from 1.0 mm
AISI 304 stainless steel and shall be supplied complete
with grease filters (UL listed), pressure measurement
taps, exhaust adjustment systems. The canopy shall
be HACCP certified.
The system to include lightweight stainless steel UV
lamps cassettes, directly integrated in the exhaust
plenum, behind the double stage mechanical filtration.
Cassettes should be easily removable by disconnecting
the electrical connectors.
Outer casing panels to be constructed from AISI 304
stainless steel in a brushed satin finish, in a modular
Construction. The joints of the lower edge shall be
fully welded to be liquid-tight, avoiding harmful
dripping of condensation. All exposed welds should be
ground and polished to the metal’s original finish.
The bottom edge of the exhaust plenum should be
aerodynamically designed (no flat surface).
Canopy ends shall be of double-sidewall construction.
Exhaust
The exhaust air flow will be based on the convective
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 383 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
•
•
•
•
•
KIT. EQPT. SPECS
INDIA
UAE
heat generated by the appliances under each canopy.
Submittal shall include convective heat calculations
based on the input power of the appliances served.
Grease filters
The canopy shall be equipped with a stainless steel
grease filter. The grease removal efficiency should be
95% for particles a diameter of 10 microns or larger.
The filter shall be NSF and UL classified. Baffle or slot
type grease filters shall not be used.
Exhaust Balancing dampers
Every spigot connections for extracted air shall be
supplied with an automated motorized balancing
damper. The damper shall automatically adjust
exhaust airflow based on direct pressure readings
from integral T.A.B test and balance port in the hood.
The Model ABD will have night time setback feature
which will automatically close the damper when the
exhaust system is shut down to prevent outside air
from migrating into the space. The Model ABD should
fail safe open on power interruption.
The damper outer casing shall be constructed of
continuously welded 1.2mm thick S.S.including the
balancing blades. Adjustment of the parallel dampers
(in open position) will be achieved by manually turning
the locking adjustment bracket until the desired
pressure reading is achieved.
Light Fixtures
Each canopy shall be provided with a LED light fixture
to provide approx. 500 lux at the cooking appliances
work surface. The light is protected with a stainless
steel hatch with plain milled finish, surrounded by a
tempered-glass light diffuser (the heat tolerance of the
glass shall be -40 to 300 °C).
Demand Control Ventilation
The system to come equipped with hood mounted
infrared cooking activity sensors capable of measuring
appliance surface temperatures. Infrared sensor will
read appliance surface temperature which will be
translated by the specific calculation algorithm for that
appliance and will respond proactively to any change
in cooking status. Infrared sensor and exhaust collar
mounted temperature sensor work in concert on
differential temperature reading back to the controller.
The system shall automatically control the speed of
the exhaust fan (and supply fan if applicable) based
on appliances status, cooking activities and exhaust air
temperatures. The system can be controlled with
either manual On/Off switch, a 24hrs automated
schedule with a manual override function, or the
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 384 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
hoods can be automatically regulated based on the
appliance status. The integrated PLC will analyze
signals from the cooking activity sensors, temperature
sensors and pressure transducers mounted in the
hood and then send a signal to the VFD(to be
provided by HVAC contractor) to adjust the exhaust
fan (and supply fan if applicable) speed to satisfy
current cooking load conditions, as well adjust the
automated balancing dampers accordingly. The
system can be monitored and controlled with an
internet connected PC from either a local or remote
location.
Fire Suppression system
Provide an automatic, water-assisted, wet chemical,
fire suppression System with provision of manual pull
station to be located in a path of egress at a maximum
height of 60 inches above the floor.Unit to be provided
with nozzles for equipment protection, plenum
protection and duct protection.Should provide 100%
protection as required by codes, standards, national,
state, and local requirements.Provide fusible links in
each exhaust duct cut-out and at a maximum gap of 2
feet (610mm) between them.Unit to be provided with
water inlet which would be connected to the fire pipe
line.Stainless steel pipe drops to be provided to the
discharge nozzles and plenum both. Discharge nozzles
should not exceed 610mm from each other.The
system, including all of its components, shall be UL
Standard 300/ ULC Standard ORD-C1254.6 Listed.
Automatic actuation shall be initiated by separation of
fusible links. Fusible link break temperature should be
as per the equipment below the same.
Distance of cylinder assembly & pull down points as
per lay out plan.
Unit should be complete of Gas shut off valve,
Disconnect system for Electrical equipment, Hood light
(incase of same is in a non fire rated enclosure,
Disconnect hvac system.
ACCESSORIES:
Standard accessories for installation, operations and
maintenance to be provided.
SAFETY NORMS:
UV access door closing and filters presence shall be
permanently controlled with maintenance free magnetic
proximity switches (automatic and immediate UV lamps
switch off).
• Each UV canopy section is equipped with a plug and play UV
module, integrated behind the light casing, ease of access
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 385 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
using the light hatch. Each UV module shall communicate with
a UV control panel, integrated in one of the canopy section.
The control panel displays warnings or
potential working defaults and shall be able to identify on
which canopy section where they occur and, if needed, which
ballast or lamps are concerned.
SPECIAL NOTE:
•
•
•
Fire suppression system should be installed by a certified vendor
and all testing and commissioning certificated needs to be
provided.
Minimum of five (05) years maintenance contract should be there
between the client and the fire suppression system vendor for
periodic maintenance inclusive cylinder and accessories as per fire
norms.
Detail provided in this specification in terms of number of Nozzles,
ducts cut outs , distance of unit etc. needs to be coordinated and
verified by Vendor. Any Deviation from above mention and
specification to be brought to the notice else it is expected that the
vendor in following complete specification as mentioned above.
HVAC Cutouts and fresh air cutouts to be coordinated with HVAC consultant. Shop drawing
with plan, elevation and section to be submitted for approval.
HALTON+ANSUL
UVI+ MARVEL+(P07)
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 386 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-104
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
Approx
1250mm
1000mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
•
•
•
•
•
•
Gas:
BTU
NA
Con.
∅
•
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom shelf
Top unit provide cut out as per Drop in modular
equipment Drop in Ice well & drop in bamboo
steamer..
Four (04) no. 1.2 mm thick door with louvers
handle & locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 387 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-113
COFFEE MACHINE WITH GRINDER
QUANTITY: 01
SIZE
Width:
325
mm
+
225
Depth:
Height:
680 mm
600 mm
120 cups per hour.
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
3/8”
(Purified)
Hot
∅
NA
Waste
∅
1”
ELECTRIC :
Power
3.5 KW
Voltage
440v-50c-3p
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
SPECIFICATIONS
• Fully automatic machine.
• With single grinder.
• Machine with hourly production of.
• Coffee: 120 Cups,
• Espresso: 180 cups,
• Café crème: 120 cups ,
• Cappuccino: 120 cups,
• Hot water: 20 liters.
• Machine with auto cleaning mechanism.
• Separate hot water and steam outlets.
• Integrated milk frother.
• Metal brewing unit with constant piston heater.
• Stainless steel tanks for coffee, hot water & steam.
• Low-noise precision grinder with direct grinding.
• See through Coffee bean container of 1.5 kg capacity.
• Manual filling funnel for ground coffee.
• Adjustable coffee dispenser from 80 to 150 mm.
ACCESSORIES:
Refrigeration Milk unit, Cup warmer
SPECIAL NOTE:
Outer Finish to be co-ordinate with Operator
FRANKIE
SWISS AGRO
WMF
EVOLUTION (E 1M HD CF).
ONE TOUCH TOP-MILK
BISTRO 03.8301.1001
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 388 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-113A
CLARIS HEAD & CARTRIDGE M
COFFEE MACHINE WITH GRINDER
FOR
QUANTITY: 01
SIZE
Width:
Depth:
Height:
3.31”
4.68”
5.78”
CAPACITY
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
TEMPERATURE:
39 - 86°F(4-30°C)
SERVICE FLOW RATE:
MAX. 0.5 GPM
PRESSURE
REQUIREMENTS:
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Built in Flush Port.
Auto shut-off.
Adjustable by-pass.
Flow restrictor.
Backflow restrictor.
CLARIS CARTRIDGE MEDIUM SIZE TO BE INSTALLED.
H: 15.43” AND W: 3.74”
MICRON RATING:- 5.00
Features include:Chlorine reduction
Ion exchange
Particulate reduction
Prefiltration
Scale control
Taste & odor
Water softening/Conditioning.
DO NOT USE TREAT CONDENSATE COOLING WATER.
29-116 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE CLARIS HEAD
EV-4339-21 & EV-4339-11
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 389 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-114
DROP IN REFRIGERATED ICE WELL WITH
WOODEN COVER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1200mm(Int
ernal)
500mm(Inter
nal)
125mm
(Internal)
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
1”
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
0.25 H.P.
Voltage
220v-50c-1ph.
EXHAUST
•
•
•
Unit drop in I.D. stone top counter .
Lights as per I.D or Lighting Consultant.
Internal size Approx 1200 mm x 500mm D x 125 High
1.2 mm thick cold pan with insulation and at all sides &
Drain outlet. .
Provide light arrangement , Led light all four sides in side
body. (Light as per I.D.)
Remote compressor
1.2mm thick S.S. perforated false bottom.
Wooden sliding lid with recessed handle (Wooden color to
be match I.D. stone top counter)
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
Power cord
SPECIAL NOTE:
To be coordinated with ID for cut outs Shop drawing with
plan, elevation and section to be submitted for approval.
Finish to be co-ordinate with I.D
IGLU
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 390 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-116
CABINET WITH DROP IN SINK
QUANTITY: 01
SIZE
Width:
Depth:
Height:
650 mm
700mm
700mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Wast
e
∅
2”
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
Gas:
BTU
NA
Con.
∅
•
0.9mm thick top SS
304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. full bottom shelf.
One (1) no. 1.6mm thick S.S. Sink of 400mm dai x
x 200mm high with Drain Fitting. (Drop in type)
Two (02) no. hinged door with integral Handle.
S.S. channel frame work.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 391 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-118
CABINET WITH WASTE BIN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
500mm
700mm
800mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
SPECIFICATIONS
•
•
•
Power
NA
•
•
•
Voltage
NA
•
ELECTRIC :
EXHAUST
NA
1.2mm thick S.S. cabinet
1.2 mm front panel with handle with approx 400mm x
150mm high flap for garbage entry.
Approx 450mm x 500mm x 500mm high, 1.2mm thick
S.S. garbage can, all corners coved.
Four (4) no. 102mm dia castor two with brakes.
Unit installed below stone top counter
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 392 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-119
ORANGE JUICE MACHINE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
390mm
555mm
795 mm
CAPACITY
30 PCS/MINUTE
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• Table top equipment
• Automatic start with feeding of fruit
• stainless steel construction
• Digital display with fruit counter
• Drip tray and grille adjustable
• Intelligent stop for improved peel management
ELECTRIC :
Power
0.2 K.W.
Voltage
220v-50c-1p
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
mm
ACCESSORIES:
Power cord with Plug
SPECIAL NOTE:
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
CITROCASA
FANTASTIC M/AS ADVANCE
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 393 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-120
MULTIPURPOSE JUICER (3 IN 1)
QUANTITY: 01
SIZE
Width:
Depth:
Height:
317 mm
490 mm
510 mm
CAPACITY
20 liter / hour
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
1.0 KW
Voltage
220v.50c.1p
•
With asynchronous Single phase, heavy duty and quiet
motor
Aluminum casting and stainless steel construction
Stainless steel bowl and filter grid rubber bowl
sustainer
Multipurpose combi machine: drink mixer Sirio, juicer
Apollo, blender Dragone.
Separate motors for each function.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
With power cord and plug, Accessories for Installation and operation.
SPECIAL NOTE:
SIRMAN
MULTIPLO 3S/L
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 394 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-121
DROP IN REFRIGERATED ICE WELL WITH
WOODEN COVER IN ROUND SHAPE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
Approx
800mm dia
(Internal)
----------
125mm
(Internal)
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
1”
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
0.25 H.P.
Voltage
220v-50c-1ph.
EXHAUST
•
•
•
Unit drop in I.D. stone top counter .
Lights as per I.D or Lighting Consultant.
Internal size Approx 800 mm dia (Internal)x 125 High
1.2 mm thick cold pan with insulation and at all sides &
Drain outlet. .
Provide light arrangement , Led light all four sides in side
body. (Light as per I.D.)
Remote compressor
1.2mm thick S.S. perforated false bottom.
Wooden lid with recessed handle (Wooden color to be
match I.D. stone top counter)
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
Power cord
SPECIAL NOTE:
To be coordinated with ID for cut outs Shop drawing with
plan, elevation and section to be submitted for approval.
Finish to be co-ordinate with I.D
IGLU
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 395 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-122
UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE:
Width:
Depth:
Height:
1550mm
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.45 k.w.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Unit installed below stone top counter by I.D
on plinth.
• All visible Exterior S.S Mirror finish to be
provided (to be confirm by I.D before
production)
• 0.9mm thick S.S. top.
• SS 304 interior and exterior.
• Six (6)no S.S Drawer with removable 1/1 G.N pans
insulation.
• With Levelers.
• Ambient temperature 43 deg C.
• Internal Temp 0 Deg C to 4 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A.
• Remote Compressor Housing.
• Digital read out thermometer, cord with time delay
auto start.
• Forced draft cooling.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating.(for condensate water
evaporation),
• Unit construction to be as per V cut Bending.
Power cord.
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
IGLU
WILLIAMS
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
CUSTOM BUILT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 396 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-123
HIGH SPEED OVEN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
538mm
761mm
483mm+feet
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
4.5 KW
Voltage
415v-50c-3p
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
NA
EXTERIOR CONSTRUCTION
•
Two-tone stainless steel front, top and sides
•
304 stainless steel removable grease collection pan
•
Cool to touch exterior , all surfaces below 131deg. F
•
Ergonomic door handle
•
7-inch capacitive touch screen with tempered glass cover
INTERIOR CONSTRUCTION
•
201 stainless steel
•
Fully insulated cook chamber
•
Removable rack with dual setting option
STANDARD FEATURES
•
Simple and intuitive touch controls, easy to clean
•
Integral recirculating catalytic converter for UL (KNLZ) listed
ventless operation
•
Variable high speed recirulating impingement air flow
•
Independently temp. offset.
•
Smart menu system
•
Vent catalyst to further limit emissions
•
USB campatible
•
Stackable (requires stacking stand)
All standard accessories
SPECIAL NOTE:
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
TURBO CHEF
BULLET
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 397 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-125
UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE:
Width:
Depth:
Height:
1550mm
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.45 k.w.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Unit installed below stone top counter by I.D
on plinth.
• All visible Exterior S.S Mirror finish to be
provided (to be confirm by I.D before
production)
• 0.9mm thick S.S. top.
• SS 304 interior and exterior.
• Six (6)no S.S Drawer with removable 1/1 G.N pans
insulation.
• With Levelers.
• Ambient temperature 43 deg C.
• Internal Temp 0 Deg C to 4 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A.
• Remote Compressor Housing.
• Digital read out thermometer, cord with time delay
auto start.
• Forced draft cooling.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating.(for condensate water
evaporation),
• Unit construction to be as per V cut Bending.
Power cord.
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
IGLU
WILLIAMS
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
CUSTOM BUILT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 398 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-127
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
Approx
650mm
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
SPECIFICATIONS
•
•
•
•
•
Power
NA
•
Voltage
NA
•
Gas:
BTU
NA
Con.
∅
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom & middle shelves
Two (02) no. 1.2 mm thick door with louvers handle
& locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 399 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: AD-128
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
Approx
2000mm
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
SPECIFICATIONS
•
•
•
•
•
Power
NA
•
Voltage
NA
•
Gas:
BTU
NA
Con.
∅
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom & middle shelves
Four (04) no. 1.2 mm thick door with louvers
handle & locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 400 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: FB-01
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
500mm
675mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
SPECIFICATIONS
•
•
•
•
•
Power
NA
•
Voltage
NA
•
Gas:
BTU
NA
Con.
∅
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom & middle shelves
One (01) no. 1.2 mm thick door with handle &
locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 401 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: FB-02
CABINET WITH WASTE BIN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
450mm
675mm
800mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
SPECIFICATIONS
•
•
•
Power
NA
•
•
•
Voltage
NA
•
ELECTRIC :
EXHAUST
NA
1.2mm thick S.S. cabinet
1.2 mm front panel with handle with approx 350mm x
150mm high flap for garbage entry.
Approx 400mm x 500mm x 500mm high, 1.2mm thick
S.S. garbage can, all corners coved.
Four (4) no. 102mm dia castor two with brakes.
Unit installed below stone top counter
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 402 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: FB-03
GLASS WASHER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
460 mm.
575 mm.
700 mm.
CAPACITY
40 rack/hr
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
¾”(purif
ied)
Hot
∅
¾”
Wast
e
∅
2”
ELECTRIC :
Power
3.5 K.W
Voltage
415v-50c-3p
SPECIFICATIONS
• Double wall insulated front door.
• S.S 304 Interior & Exterior.
• Washing capacity of 40 racks per hr.
• Rack size to be 400 mm X 400 mm.
• hot water indicator light, suitable for operation of
incoming hot water supply.
• Built in rinse aid dispenser, door safety switch and also
with flat racks and cutlery containers.
• Heater with thermostat Control.
• Unit to be fully automatic wash and rinse cycle with
correct temperature indicators for consistent cleaning.
• Unit installed below stone top counter by I.D.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
Complete with built in drain pump and built in softener
electric booster rinse heater & electric tank heater, Six (06)
no. Glass rack, Power Cord with Plug.
SPECIAL NOTE:
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
MEIKO
ECOSTAR 430 F
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 403 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: FB-03A
WATER FILTER FOR GLASS WASHER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
8.04”
5.25”
7.59”
CAPACITY
9000 GALLONS
(34069 liters)
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
SPECIFICATIONS
• NSF certified scale stick.
• Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
• Include built in water shut-off valve system.
• Built in water pressure gauge.
• Shipping Weight is 6lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
TEMPERATURE:
80°F(27°C)
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
10-125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE
QC71 SINGLE-MH2
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 404 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: FB-04
GLASS RACK CABINET
QUANTITY: 01
SIZE
Width:
Depth:
Height:
500mm
675 mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
½”
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
• 1.2mm thick S.S. body welded construction
• 1.2mm thick base
• Three pairs sliding tray with integral handle as per
standard glass rack
• Smooth interior walls.
• Angle rack slide as per glass washer racks.
• Unit installed below stone top counter &
mounted on Masonry plinth.
• All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 405 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: FB-06
COCKTAIL/BLENDER STATION W/DOUBLE
SPEED RAIL
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1200mm
700mm+sp
eed rail
750mm
approx
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
1/2"
Hot
∅
1/2"
Wast
e
∅
(2)2”
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
SPECIFICATIONS
• 1.6mm thick S.S. top.
• 50 mm high splash.
• Rear condiment fitting with (4) no. S.S. garnish pan,
• Front of unit full length speed rail,
• One no. S. S. towel ring,
• S.S. bottle opener with bottle cap catcher.
• Insulted ice chest net.
• Cast aluminum plate concealed under ice chest liner.
• Bottle Holder.
• Under S.S. drawer with handle for ice storage.
• Sliding stainless steel cover.
• CFC free foamed-in-place insulation.
• 0.9mm Thick Rear & Both sides cladding.
• Right
side
of
top
1.6mm
thick
S.S.
250mmx350x200mm deep Sink , Complete with drain
fitting.
• 1.2mm thick low height Blender shelf with hole for
cord.
• Without legs, Equipment mounted on Masonry plinth
• One (1) Inbuilt IP-66 Clipsal make or equivalent with
switch socket to be provided for blender.
• Unit mounted on Masonry plinth.
• All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 406 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: FB-07
BLENDER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
205mm
230 mm
510 mm
CAPACITY
2.0 liters Jar
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
•
•
ELECTRIC :
Power
0.95 KW
Voltage
220v-50c-1p
To blend, crush, grind, etc.
2 litres durable polycarbonate decanter.
Variable speed appliance with pulse.
Maximum speed: 28.000 rpm.
Heavy duty wear-resistant base.
With acoustic cover.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
mm
1.5 Liter bowl, Unit Complete with All Standard Accessories, 2 Jars
SPECIAL NOTE:
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
SAMMIC
Equivalent
TB-2000
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 407 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: FB-09
GLASS FROSTER
QUANTITY: 01
SIZE:
Width:
Depth:
Height:
750 mm
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.45 KW
Voltage
220v-50c-1p
EXHAUST
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
NA
GAS:
BTU
NA
Con.
∅
•
•
•
•
All type 304 stainless steel interior constructions.
Foamed-in-place insulation.
All 1.2mm Thick S.S. construction
Six foot grounded cord provided (exits at rear).
Stainless steel dies cast handle.
Two Defrost Cycles: automatic - occurs every six hours
without affecting normal operation, manual - user
selected for complete six-hour defrost with automatic
restart
Stainless steel evaporator housing with separate
removable evaporator drain pan.
Automatic condensate evaporator.
Two (02) no. drawer
Internal temperature to be maintained between 0ºF to
35ºF
REFRIGERANT GAS: R-404 A.
Remote compressor
Unit installed below stone top counter &
mounted on Masonry plinth.
All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
IGLU
WILLIAMS
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
CUSTOM BUILT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 408 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: FB-10A
COUNTER FOR CHILLER/KEGS
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1500mm
675 mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
•
•
•
•
•
•
Gas:
BTU
NA
Con.
∅
•
0.9 mm thick top
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom shelf
Three (03) no. 1.2 mm thick door with handle &
locking arrangement.
Door location size, cabinet size please verify /
Coordinated with Beer vendor before equipment
production
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 409 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: FB-11
BOTTLE COOLER – 3 DOOR
QUANTITY: 02
SIZE :
Width:
Depth:
Height:
1352 mm
530mm
800 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.35 k.w.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
• Unit install below Stone top Counter on plinth.
• Front black color bond with
internal S.S
Mirror Finish to be provided (Final finish to be
confirm with I.D before production)
• Switch activated Led lights as per I.D.
• Switch activated Led lights
• 304 S/S exterior and 304 BA MIRROR S/S interior
• S.S. at back and base
• Six S/S Perforated removable & adjustable shelves
• Three double glazed Argon gas door
• Bright low energy lighting, with on/off switch
• Ambient temperature 32 deg C.
• Internal Temp +4 Deg C to +10 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A
• Remote Compressor
• Rounded edge for internal chamber
• No drainage required as equipped with waste heat
recovery vaporizer
• Automatic defrost
• Anti condensation heaters fitted to door mullions
• Digital temperature controller with compressor
running indicator, defrost indicator, condensing
cleaning light, fan running indicator, high low
temperature alarm
ACCESSORIES:
SPECIAL NOTE:
IGLU
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 410 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: FB-12
BOTTLE COOLER – 2 DOOR
QUANTITY: 04
SIZE :
Width:
Depth:
Height:
900 mm
530 mm
800 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.35 k.w.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Unit install below Stone top Counter on plinth.
Front black color bond with
internal S.S
Mirror Finish to be provided (Final finish to be
confirm with I.D before production)
Switch activated Led lights as per I.D.
304 S/S exterior and 304 BA MIRROR S/S interior
S.s. at back and base
Six S/S Perforated removable & adjustable shelves
Two (02) double glazed Argon gas door
Bright low energy lighting, with on/off switch
Ambient temperature 32 deg C.
Internal Temp +4 Deg C to +10 Deg C.
Air-cooled.
REFRIGERANT GAS: R-134 A
Remote compressor
Rounded edge for internal chamber
No drainage required as equipped with waste heat
recovery vaporizer
Automatic defrost
Anti condensation heaters fitted to door mullions
Digital temperature controller with compressor
running indicator, defrost indicator, condensing
cleaning light, fan running indicator, high low
temperature alarm
ACCESSORIES:
SPECIAL NOTE:
IGLU
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 411 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: FB-14
CABINET WITH STORAGE
QUANTITY: 02
SIZE
Width:
Depth:
Height:
750 mm
530 mm
800 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
SPECIFICATIONS
•
•
•
•
•
Power
NA
•
Voltage
NA
•
Gas:
BTU
NA
Con.
∅
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom & middle shelves
One (01) no. 1.2 mm thick door with handle &
locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior to be match
adjoining modular equipments bottle coolers
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 412 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: FB-15
WINE CHILLER – RED WINE
QUANTITY: 02
SIZE
Width:
Depth:
Height:
600mm
530mm
800mm
CAPACITY
CAP-35 BOTTLES
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.5 KW
Voltage
220-50-1
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
SPECIFICATIONS
• Unit install below Stone top Counter on plinth.
• Front black color bond with internal S.S Mirror
Finish to be provided (Final finish to be confirm
with I.D before production)
• Switch activated Led lights as per I.D.
• Refrigerated storage sections with hinged glass doors
units
• Remote compressor
• Dimpnd type wooden rack
• Ambient temperature 43 Dec C
• Suitable Internal for Red wine
• Air-cooled.
• Digital temperature display.
• Locking arrangement.
• Glass Doors.
• Forced draft cooling.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating. (For condensate water
evaporation).
• REFRIGERANT: R-134 A.
ACCESSORIES:
Power cord.
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
IGLU
WILLIAMS
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
CUSTOM BUILT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 413 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: FB-16
WINE CHILLER – WHITE WINE
QUANTITY: 02
SIZE
Width:
Depth:
Height:
600mm
530mm
800mm
CAPACITY
CAP-35 BOTTLES
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.5 KW
Voltage
220-50-1
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
SPECIFICATIONS
• Unit install below Stone top Counter on plinth.
• Front black color bond with internal S.S Mirror
Finish to be provided (Final finish to be confirm
with I.D before production)
• Switch activated Led lights as per I.D.
• Refrigerated storage sections with hinged glass doors
units
• Remote compressor
• Dimpnd type wooden rack
• Ambient temperature 43 Dec C
• Suitable Internal for White wine
• Air-cooled.
• Digital temperature display.
• Locking arrangement.
• Glass Doors.
• Forced draft cooling.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating. (For condensate water
evaporation).
• REFRIGERANT: R-134 A.
ACCESSORIES:
Power cord.
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
IGLU
WILLIAMS
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
CUSTOM BUILT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 414 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: FB-21
SEMI AUTOMATIC COFFEE MACHINE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1000mm
530mm
520 mm
CAPACITY
THREE (03) GROUP
M.E.P REQUIREMENT
PLUMBING :
Cold
∅
3/8"
Hot
∅
NA
Wast
e
∅
1"
ELECTRIC :
Power
6.5 KW
Voltage
415v-50c-3p
EXHAUST
SPECIFICATIONS
• Semi-automatic.
• S.S 304 Exterior.
• With Water softener
• Semi- automatic cleaning system & pump.
• Boiler capacity 15 Litres.
• Steam wands Three (03).
• Hot water wands One (1).
• Auto steam
• Electrical cup warmer
• Knock out Drawer
• Tamper
• Tamping machine
NA
GAS:
BTU
NA
Con.
∅
mm
ACCESSORIES:
Power cord with plug.
SPECIAL NOTE:
Color To be coordinated with ID
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDER.
FRANKE
LA-CIMBALI
T400-3 GROUPS
KIT. EQPT. SPECS
INDIA
UAE
EQUIVLANT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 415 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: FB-21A
CLARIS HEAD & CARTRIDGE M
COFFEE MACHINE WITH GRINDER
FOR
QUANTITY: 01
SIZE
Width:
Depth:
Height:
3.31”
4.68”
5.78”
CAPACITY
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
TEMPERATURE:
39 - 86°F(4-30°C)
SERVICE FLOW RATE:
MAX. 0.5 GPM
PRESSURE
REQUIREMENTS:
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Built in Flush Port.
Auto shut-off.
Adjustable by-pass.
Flow restrictor.
Backflow restrictor.
CLARIS CARTRIDGE MEDIUM SIZE TO BE INSTALLED.
H: 15.43” AND W: 3.74”
MICRON RATING:- 5.00
Features include:Chlorine reduction
Ion exchange
Particulate reduction
Prefiltration
Scale control
Taste & odor
Water softening/Conditioning.
DO NOT USE TREAT CONDENSATE COOLING WATER.
29-116 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE CLARIS HEAD
EV-4339-21 & EV-4339-11
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 416 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: FB-22
COFFEE GRINDER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
160 mm
200 mm
462 mm
CAPACITY
10-15 LBS/HR.
M.E.P REQUIREMENT
PLUMBING :
SPECIFICATIONS
•
Grinder blade speed: 1600 RPM
Cold
∅
3/8"
•
Bean Hopper Capacity: 1.3 LBS
Hot
∅
NA
•
Grinder Burrs Dia: 50 mm
Wast
e
∅
1"
•
Feature cast metal bodies built with durable, high
capacity bean.
•
Hoppers for heavy use
•
Allow quick, precise finitely adjustable grind
adjustments
•
Include large capacity dozers with customizable
dosing capability
•
Have an unparalleled track record for performance in
U.S. espresso operations
ELECTRIC :
Power
0.25 HP
Voltage
220v-50c-1p
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
mm
ACCESSORIES:
Power cord with plug.
SPECIAL NOTE:
Color To be coordinated with ID
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDER.
FRANKE
LA-CIMBALI
MINI
KIT. EQPT. SPECS
INDIA
UAE
EQUIVLANT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 417 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: FB-24
COUNTER WITH STORAGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1200mm
700 mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
SPECIFICATIONS
•
•
•
•
•
Power
NA
•
Voltage
NA
•
Gas:
BTU
NA
Con.
∅
0.9 mm thick top
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom and middle shelves.
Three (03) no. 1.2 mm thick door with handle &
locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 418 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: FB-26
GLASS RACK CABINET
QUANTITY: 01
SIZE
Width:
Depth:
Height:
500mm
675 mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
½”
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
• 1.2mm thick S.S. body welded construction
• 1.2mm thick base
• Three pairs sliding tray with integral handle as per
standard glass rack
• Smooth interior walls.
• Angle rack slide as per glass washer racks.
• Unit installed below stone top counter &
mounted on Masonry plinth.
• All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 419 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: FB-27
VERTICAL REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
1200 mm
800mm
1200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.65 KW
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
304 S/S exterior/Interior
(Final finish as per I.D. pls. confirmed before production.
S.S. at back and both side with glass door.
Two (02) no. Glass shelves removable & adjustable
Remote compressor.
Lights as per I.D. (Pls. confirmed before production)
On/off switch and temperature display at bottom.
Two (02) no. glass door with handle.
Ambient temperature 32 deg C.
Internal Temp +4 Deg C to +10 Deg C.
Air-cooled.
REFRIGERANT GAS: R-134 A
Rounded edge for internal chamber
waste heat recovery vaporizer
Automatic defrost
Anti condensation heaters fitted to door mullions
Digital temperature controller with compressor running indicator,
defrost indicator, condensing cleaning light, fan running
indicator, high low temperature alarm
Four (04) no. 100mm high S.S. legs with adjustable bullet feet.
Front of legs 100mm high skirting all sides as shown
All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm by I.D before
production)
ACCESSORIES:
SPECIAL NOTE:
This item is located front of house & will be
highly visible , the finishing required must be
first class & will be required coordination with
the Interior designer/Interior contractor
IGLU
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 420 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: FB-28
BLENDER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
205mm
230 mm
510 mm
CAPACITY
2.0 liters Jar
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
•
•
ELECTRIC :
Power
0.95 KW
Voltage
220V-50C-1P
To blend, crush, grind, etc.
2 litres durable polycarbonate decanter.
Variable speed appliance with pulse.
Maximum speed: 28.000 rpm.
Heavy duty wear-resistant base.
With acoustic cover.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
mm
1.5 Liter bowl, Unit Complete with All Standard Accessories, 2 Jars
SPECIAL NOTE:
SAMMIC
Equivalent
TB-2000
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 421 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: FB-29
COCKTAIL/BLENDER STATION W/DOUBLE
SPEED RAIL
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1100mm
750mm+sp
eed rail
750mm
approx
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
1/2"
Hot
∅
1/2"
Wast
e
∅
(2)2”
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
SPECIFICATIONS
• 1.6mm thick S.S. top.
• 50 mm high splash.
• Rear condiment fitting with (4) no. S.S. garnish pan,
• Front of unit full length speed rail,
• One no. S. S. towel ring,
• S.S. bottle opener with bottle cap catcher.
• Insulted ice chest net.
• Cast aluminum plate concealed under ice chest liner.
• Bottle Holder.
• Under S.S. drawer with handle for ice storage.
• Sliding stainless steel cover.
• CFC free foamed-in-place insulation.
• 0.9mm Thick Rear & Both sides cladding.
• Right
side
of
top
1.6mm
thick
S.S.
250mmx350x200mm deep Sink , Complete with drain
fitting.
• 1.2mm thick low height Blender shelf with hole for
cord.
• Without legs, Equipment mounted on Masonry plinth
• One (1) Inbuilt IP-66 Clipsal make or equivalent with
switch socket to be provided for blender.
• Unit mounted on Masonry plinth.
• All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 422 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: FB-30
CABINET WITH WASTE BIN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
500mm
675mm
800mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
SPECIFICATIONS
•
•
•
Power
NA
•
•
•
Voltage
NA
•
ELECTRIC :
EXHAUST
NA
1.2mm thick S.S. cabinet
1.2 mm front panel with handle with approx 450mm x
150mm high flap for garbage entry.
Approx 450mm x 500mm x 500mm high, 1.2mm thick
S.S. garbage can, all corners coved.
Four (4) no. 102mm dia castor two with brakes.
Unit installed below stone top counter
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 423 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: FB-32
UNDER COUNTER REFRIGATOR
QUANTITY: 01
SIZE:
Width:
Depth:
Height:
1035mm
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Unit installed below stone top counter by
I.D on plinth.
• All visible Exterior S.S Mirror finish to be
provided (to be confirm by I.D before
production).
• 0.9mm thick S.S. top.
• SS 304 interior and exterior.
• Four (04) no S.S Drawer with removable 1/1
G.N pans insulation.
• With Levelers.
• Ambient temperature 43 deg C.
• Internal Temp 0 Deg C to 4 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A.
• Remote Compressor Housing.
• Digital read out thermometer, cord with time
delay auto start.
• Forced draft cooling.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating.(for condensate water
evaporation),
• Unit construction to be as per V cut Bending.
Power cord.
Cold
∅
NA
Hot
∅
NA
Wast ∅
e
NA
ELECTRIC :
Power
0.35 k.w.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
•
Shop drawing with plan, elevation and section
to be submitted for approval.
IGLU
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 424 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-02
DROP IN HEATED STONE TOP
QUANTITY: 01
SIZE
Width:
Depth:
Height:
914 mm
457 mm
64 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.93 KW
Voltage
220v-50c-1p
SPECIFICATIONS
• Drop in Unit.
• Bermuda sand color of stone.
• Stone top to be approved food safe material.
• Thermostatically-controlled heated base.
• Temperatures Range from 100°C to 200°C to be
maintained at 29˚C ambient room temperature.
• Flush Mount Electronic Control Box with Lighted
On/Off Rocker Switch.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
To be coordinated with ID for cut outs.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER.
HATCO
GRSSB-3618
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 425 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-02A
RECTRACTABLE HEAT LAMP
QUANTITY: 02
SIZE
Dia:
Depth:
267 mm
--
CAPACITY
Height:
990 to
1765 mm
250 Watt
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
SPECIFICATIONS
• lamp bulb heating rated of 250 watt each
• Remote Operated Switch.
• Cord length Adjustable from 39” to 69 -½”
• Bulb Color to be confirmed by I.D.
• Outer finish to be confirmed by I.D.
ELECTRIC :
Power
0.25 KW.
Voltage
220v-50c-1p
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
Accessories for installation and operation.
SPECIAL NOTE:
Outer shade to be Confirmed by I.D.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER.
HATCO
DLH-775-RL
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 426 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-03
SEMI AUTOMATIC COFFEE MACHINE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1000mm
530mm
520 mm
CAPACITY
THREE (03) GROUP
M.E.P REQUIREMENT
PLUMBING :
Cold
∅
3/8"
Hot
∅
NA
Wast
e
∅
1"
ELECTRIC :
Power
6.5 KW
Voltage
415v-50c-3p
EXHAUST
SPECIFICATIONS
• Semi-automatic.
• S.S 304 Exterior.
• With Water softener
• Semi- automatic cleaning system & pump.
• Boiler capacity 15 Litres.
• Steam wands Three (03).
• Hot water wands One (1).
• Auto steam
• Electrical cup warmer
• Knock out Drawer
• Tamper
• Tamping machine
NA
GAS:
BTU
NA
Con.
∅
mm
ACCESSORIES:
Power cord with plug.
SPECIAL NOTE:
Color To be coordinated with ID
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDER.
FRANKE
LA-CIMBALI
T400-3 GROUPS
KIT. EQPT. SPECS
INDIA
UAE
EQUIVLANT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 427 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-03A
CLARIS HEAD & CARTRIDGE M
COFFEE MACHINE WITH GRINDER
FOR
QUANTITY: 01
SIZE
Width:
Depth:
Height:
3.31”
4.68”
5.78”
CAPACITY
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
TEMPERATURE:
39 - 86°F(4-30°C)
SERVICE FLOW RATE:
MAX. 0.5 GPM
PRESSURE
REQUIREMENTS:
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Built in Flush Port.
Auto shut-off.
Adjustable by-pass.
Flow restrictor.
Backflow restrictor.
CLARIS CARTRIDGE MEDIUM SIZE TO BE INSTALLED.
H: 15.43” AND W: 3.74”
MICRON RATING:- 5.00
Features include:Chlorine reduction
Ion exchange
Particulate reduction
Prefiltration
Scale control
Taste & odor
Water softening/Conditioning.
DO NOT USE TREAT CONDENSATE COOLING WATER.
29-116 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE CLARIS HEAD
EV-4339-21 & EV-4339-11
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 428 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-03B
COFFEE GRINDER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
160 mm
200 mm
462 mm
CAPACITY
10-15 LBS/HR.
M.E.P REQUIREMENT
PLUMBING :
SPECIFICATIONS
•
Grinder blade speed: 1600 RPM
Cold
∅
3/8"
•
Bean Hopper Capacity: 1.3 LBS
Hot
∅
NA
•
Grinder Burrs Dia: 50 mm
Wast
e
∅
1"
•
Feature cast metal bodies built with durable, high
capacity bean.
•
Hoppers for heavy use
•
Allow quick, precise finitely adjustable grind
adjustments
•
Include large capacity dozers with customizable
dosing capability
•
Have an unparalleled track record for performance in
U.S. espresso operations
ELECTRIC :
Power
0.25 HP
Voltage
220v-50c-1p
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
mm
ACCESSORIES:
Power cord with plug.
SPECIAL NOTE:
Color To be coordinated with ID
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDER.
FRANKE
LA-CIMBALI
MINI
KIT. EQPT. SPECS
INDIA
UAE
EQUIVLANT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 429 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-04
TEA SAMOWAR
QUANTITY: 01
SIZE
Width:
Depth:
Height:
480 mm
400 mm
720 mm
CAPACIT
Y
15LITERS / 2 LITERS JUG
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
1.0 KW
Voltage
220v-50c-1p
SPECIFICATIONS
• Stainless steel, real gold plated.
• Water container – 15 liters.
• Tea pot container – 2 liters.
• Included tea strainer.
• Thermostatically regulated with over heating protection.
• Two heating coils.
• 700W for keeping warm.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅ NA
ACCESSORIES:
SPECIAL NOTE:
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
NEUMARKER
SAMOWAR ROYAL 00-10129N
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 430 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-05
REFRIGERATED SAVORY SHOW CASE
QUANTITY: 01
SIZE
Width:
Depth:
1800 mm
825 mm
Height:
1200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
SPECIFICATIONS
Cold
∅
NA
mm
Hot
∅
NA
mm
Waste
∅
NA
mm
•
•
•
•
•
•
•
•
•
•
ELECTRIC :
Power
0.45 K.W.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
0.9mm thick SS 304 Body.
Clear 530mm high glass display
Double layer ultra clear toughened heated film glass
sliding shutter.
Internal temp +3 Deg C to +08 Deg C.
Frosted ultra clear bottom base.
One (01) Frosted ultra clear glass shelf.
All interiors to be of S.S.
Forced draft cooling.
Remote compressor
Light arrangement as per ID or Lighting Consultant.
With Humidity control.
With Temperature Display LED Light.
Drip tray with heating. (For condensate water
evaporation).
As shown front stone cladding ( Stone color as per
I.D,)
All visible Exterior S.S Mirror finish to be provided
(to be confirm by I.D before production).
•
•
•
•
•
ACCESSORIES:
SPECIAL NOTE:
•
This item is located front of house & will be highly visible ,
the finishing required must be first class & will be required
coordination with the Interior designer. Equipment finishes,
lights as per I.D.
WILLIAMS
IGLU
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 431 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-06
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
950mm
675 mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
SPECIFICATIONS
•
•
•
•
•
Power
NA
•
Voltage
NA
•
Gas:
BTU
NA
Con.
∅
0.9 mm thick
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom and middle shelves.
Two (02) no. 1.2 mm thick door with handle &
locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 432 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-07
CABINET WITH DROP IN SINK
QUANTITY: 01
SIZE
Width:
Depth:
Height:
600 mm
675 mm
700mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Wast
e
∅
2”
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
•
•
•
•
•
•
0.9mm thick top SS
304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. full bottom shelf.
One (1) no. 1.6mm thick S.S. Sink of 400mm x
400mm x 200mm high with Drain Fitting. (Drop in
type)
One (01) no. hinged door with integral Handle.
S.S. channel frame work.
Left side of top provide cut out as per modular
equipment drop in hand wash sink.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 433 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-08
EXHAUST HOOD WITH UV GREASE
REMOVAL COMPLETE WITH DEMAND
CONTROL VENTILATION & FIRE
SUPRESSION SYSTEM
QUANTITY: 01
SIZE
Width
Depth
Height:
2900mm
1550 mm
555mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅ NA
Wast
e
∅ NA
SPECIFICATIONS
•
•
ELECTRIC :
Power
0.5 K.W (for
light)
Voltage
220v-50c-1p
EXHAUST
•
3,850 CFM
GAS:
BTU
NA
Con.
∅
KIT. EQPT. SPECS
INDIA
UAE
•
•
•
The kitchen canopy shall be constructed from 1.0 mm
AISI 304 stainless steel and shall be supplied complete
with grease filters (UL listed), pressure measurement
taps, exhaust adjustment systems. The canopy shall
be HACCP certified.
The system to include lightweight stainless steel UV
lamps cassettes, directly integrated in the exhaust
plenum, behind the double stage mechanical filtration.
Cassettes should be easily removable by disconnecting
the electrical connectors.
Outer casing panels to be constructed from AISI 304
stainless steel in a brushed satin finish, in a modular
Construction. The joints of the lower edge shall be
fully welded to be liquid-tight, avoiding harmful
dripping of condensation. All exposed welds should be
ground and polished to the metal’s original finish.
The bottom edge of the exhaust plenum should be
aerodynamically designed (no flat surface).
Canopy ends shall be of double-sidewall construction.
Exhaust
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 434 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
•
•
•
•
•
•
KIT. EQPT. SPECS
INDIA
UAE
The exhaust air flow will be based on the convective
heat generated by the appliances under each canopy.
Submittal shall include convective heat calculations
based on the input power of the appliances served.
Grease filters
The canopy shall be equipped with a stainless steel
grease filter. The grease removal efficiency should be
95% for particles a diameter of 10 microns or larger.
The filter shall be NSF and UL classified. Baffle or slot
type grease filters shall not be used.
Exhaust Balancing dampers
Every spigot connections for extracted air shall be
supplied with an automated motorized balancing
damper. The damper shall automatically adjust
exhaust airflow based on direct pressure readings
from integral T.A.B test and balance port in the hood.
The Model ABD will have night time setback feature
which will automatically close the damper when the
exhaust system is shut down to prevent outside air
from migrating into the space. The Model ABD should
fail safe open on power interruption.
The damper outer casing shall be constructed of
continuously welded 1.2mm thick S.S.including the
balancing blades. Adjustment of the parallel dampers
(in open position) will be achieved by manually turning
the locking adjustment bracket until the desired
pressure reading is achieved.
Light Fixtures
Each canopy shall be provided with a LED light fixture
to provide approx. 500 lux at the cooking appliances
work surface. The light is protected with a stainless
steel hatch with plain milled finish, surrounded by a
tempered-glass light diffuser (the heat tolerance of the
glass shall be -40 to 300 °C).
Demand Control Ventilation
The system to come equipped with hood mounted
infrared cooking activity sensors capable of measuring
appliance surface temperatures. Infrared sensor will
read appliance surface temperature which will be
translated by the specific calculation algorithm for that
appliance and will respond proactively to any change
in cooking status. Infrared sensor and exhaust collar
mounted temperature sensor work in concert on
differential temperature reading back to the controller.
The system shall automatically control the speed of
the exhaust fan (and supply fan if applicable) based
on appliances status, cooking activities and exhaust air
temperatures. The system can be controlled with
either manual On/Off switch, a 24hrs automated
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 435 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
schedule with a manual override function, or the
hoods can be automatically regulated based on the
appliance status. The integrated PLC will analyze
signals from the cooking activity sensors, temperature
sensors and pressure transducers mounted in the
hood and then send a signal to the VFD(to be
provided by HVAC contractor) to adjust the exhaust
fan (and supply fan if applicable) speed to satisfy
current cooking load conditions, as well adjust the
automated balancing dampers accordingly. The
system can be monitored and controlled with an
internet connected PC from either a local or remote
location.
Fire Suppression system
Provide an automatic, water-assisted, wet chemical,
fire suppression System with provision of manual pull
station to be located in a path of egress at a maximum
height of 60 inches above the floor.Unit to be provided
with nozzles for equipment protection, plenum
protection and duct protection.Should provide 100%
protection as required by codes, standards, national,
state, and local requirements.Provide fusible links in
each exhaust duct cut-out and at a maximum gap of 2
feet (610mm) between them.Unit to be provided with
water inlet which would be connected to the fire pipe
line.Stainless steel pipe drops to be provided to the
discharge nozzles and plenum both. Discharge nozzles
should not exceed 610mm from each other.The
system, including all of its components, shall be UL
Standard 300/ ULC Standard ORD-C1254.6 Listed.
Automatic actuation shall be initiated by separation of
fusible links. Fusible link break temperature should be
as per the equipment below the same.
Distance of cylinder assembly & pull down points as
per lay out plan.
Unit should be complete of Gas shut off valve,
Disconnect system for Electrical equipment, Hood light
(incase of same is in a non fire rated enclosure,
Disconnect hvac system.
ACCESSORIES:
Standard accessories for installation, operations and
maintenance to be provided.
SAFETY NORMS:
UV access door closing and filters presence shall be
permanently controlled with maintenance free magnetic
proximity switches (automatic and immediate UV lamps
switch off).
• Each UV canopy section is equipped with a plug and play UV
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 436 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
module, integrated behind the light casing, ease of access
using the light hatch. Each UV module shall communicate with
a UV control panel, integrated in one of the canopy section.
The control panel displays warnings or
potential working defaults and shall be able to identify on
which canopy section where they occur and, if needed, which
ballast or lamps are concerned.
SPECIAL NOTE:
•
•
•
Fire suppression system should be installed by a certified vendor
and all testing and commissioning certificated needs to be
provided.
Minimum of five (05) years maintenance contract should be there
between the client and the fire suppression system vendor for
periodic maintenance inclusive cylinder and accessories as per fire
norms.
Detail provided in this specification in terms of number of Nozzles,
ducts cut outs , distance of unit etc. needs to be coordinated and
verified by Vendor. Any Deviation from above mention and
specification to be brought to the notice else it is expected that the
vendor in following complete specification as mentioned above.
HVAC Cutouts and fresh air cutouts to be coordinated with HVAC consultant. Shop drawing
with plan, elevation and section to be submitted for approval.
HALTON+ANSUL
UVI+ MARVEL+(P10)
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 437 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-09
DEEP FAT FRYER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
400 mm
850 mm
900mm
CAPACITY
12.5 Liter
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.2 K.W.
Voltage
220v-50c-1p
EXHAUST
SPECIFICATIONS
• Gas operated equipment.
• AISI 306 Constructions.
• Frying well tanks with capacity of 12.5 liters for well.
• Baskets.
• 2Lids.
•
oil clarifying trays.
• Unit provided with deep cold zone to collect food debris.
• Under Storage cupboard with Front hinged doors.
• S.S. Legs with S.S. adjustable feet
• Piezo ignition.
• Flame failure device.
NA
GAS:
BTU
72345
Con.
∅
3/4
"
ACCESSORIES:
Oil Filter for fryer; Oil receptacle
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 438 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-09A
SPREADER TABLE
QUANTITY: 02
SIZE
Width:
Depth:
Height:
400mm
850 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• Free Standing.
• S.S. Construction AISI 306.
• Under storage cupboard.
• Rear splash.
• S.S. Legs with S.S. adjustable feet.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 439 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-09B
TWO BURNER RANGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
400 mm
850 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
Equipment to Operate on gas.
Two (02) Burners open top range.
Piezo ignition.
Flame failure device.
In build pressure Control regulator.
CNS Sliding grid.
Below under storage cupboard with handle
S.S. Legs with S.S. adjustable feet.
EXHAUST
NA
GAS:
BTU
49000
Con.
∅
¾”
ACCESSORIES:
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 440 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-09C
GRIDDLE PLATE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
600 mm
850 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• smooth plate
• Equipment to Operate on LPG Gas.
• Freestanding Fry top.
• Rear splash.
• Cooking Surface of 564 W X640 D
• Splash Back in Stainless steel grids on three sides.
• Inner and outer Body AISI 306 Stainless steel
• S.S. Legs with S.S. adjustable feet.
• Under Storage cupboard with Front hinged doors.
• Lateral drain channel for cleaning.
• Piezo ignition.
• Flame failure device.
• Fat collecting container.
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
47812
Con.
∅
¾”
ACCESSORIES:
Scrapper with brush; Splash guard
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing
with plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 441 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-10
REFRIGERATED SWEET SHOW CASE
QUANTITY: 01
SIZE
Width:
Depth:
1800 mm
825 mm
Height:
1200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
SPECIFICATIONS
Cold
∅
NA
mm
Hot
∅
NA
mm
Waste
∅
NA
mm
•
•
•
•
•
•
•
•
•
•
ELECTRIC :
Power
0.45 K.W.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
0.9mm thick SS 304 Body.
Clear 530mm high glass display
Double layer ultra clear toughened heated film glass
sliding shutter.
Internal temp +3 Deg C to +08 Deg C.
Frosted ultra clear bottom base.
One (01) Frosted ultra clear glass shelf.
All interiors to be of S.S.
Forced draft cooling.
Remote compressor
Light arrangement as per ID or Lighting Consultant.
With Humidity control.
With Temperature Display LED Light.
Drip tray with heating. (For condensate water
evaporation).
As shown front stone cladding ( Stone color as per
I.D,)
All visible Exterior S.S Mirror finish to be provided
(to be confirm by I.D before production).
•
•
•
•
•
ACCESSORIES:
SPECIAL NOTE:
•
This item is located front of house & will be highly visible ,
the finishing required must be first class & will be required
coordination with the Interior designer. Equipment finishes,
lights as per I.D.
WILLIAMS
IGLU
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 442 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-11
CABINET WITH WASTE BIN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
500mm
675mm
800mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
SPECIFICATIONS
•
•
•
Power
NA
•
•
•
Voltage
NA
•
ELECTRIC :
EXHAUST
NA
1.2mm thick S.S. cabinet
1.2 mm front panel with handle with approx 400mm x
150mm high flap for garbage entry.
Approx 450mm x 500mm x 500mm high, 1.2mm thick
S.S. garbage can, all corners coved.
Four (4) no. 102mm dia castor two with brakes.
Unit installed below stone top counter
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 443 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-12
CABINET WITH WASTE BIN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
500mm
700mm
800mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
SPECIFICATIONS
•
•
•
Power
NA
•
•
•
Voltage
NA
•
ELECTRIC :
EXHAUST
NA
1.2mm thick S.S. cabinet
1.2 mm front panel with handle with approx 400mm x
150mm high flap for garbage entry.
Approx 450mm x 500mm x 500mm high, 1.2mm thick
S.S. garbage can, all corners coved.
Four (4) no. 102mm dia castor two with brakes.
Unit installed below stone top counter
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 444 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-14
TWO DECK BAKING OVEN/CONVECTION
OVEN, PROOFING CABINET & INTEGRATED
HOOD
QUANTITY: 01
SIZE
Width:
Depth:
Height:
962 mm
890
mm/1380mm
2112+160
mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
¾”
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
18.6 K.W
Voltage
400V-50C-3P
EXHAUST
NA
GAS:
BTU
NA
Con.
∅ NA
ACCESSORIES:
SPECIFICATIONS
• Free standing unit
• One (01) no. convection oven
• Two (02) stone hearth deck oven
• One (01) Proofing Cabinet base
• One (01) Integrated hood
• S.S. exterior
• Build-in-electric-heated steam generator for oven for each
chamber
• One tray per deck of size 400 X 600mm.
• Each Oven to be operated through standard programme
control system
• Illumination lights for each deck
• Heatproof observation glass windows in S.S. frame
• Each chamber to be provided with timers
• Proofer with hinged shutter of body height
• Proofer to accommodate 3 baking trays of size 400 x 600
• With castors and break on all four.
Standard Accessories.
SPECIAL NOTE:
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
KOLB
ATOLL800 with
600x 400-2
KIT. EQPT. SPECS
INDIA
UAE
deck
oven
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 445 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-14A
SCALE INHIBITOR FEEDER FOR BAKING
OVEN
QUANTITY: 01
SIZE
Width:
Depth:
5.16”
5.5”
Height:
12.44”
CAPACITY
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/4”
Hot
∅
NA
Waste
∅
3/4”
SPECIFICATIONS
• SS-10 CARTRIDGE INSTALLED.
• SYSTEM INCLUDES SR-X HOUSING, SS-IMF CARTRIDGE AND
SPACER.
• The SS-IMF is NSF certified under NSF/ANSI standard 42
• Operating Weight is 6lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
ELECTRIC:
Power
NA
Voltage
NA
TEMPERATURE:
35 - 100°F(2 - 38°C)
SERVICE FLOW RATE:
MAX. 6.0 GPM
PRESSURE
REQUIREMENTS:
10-125 PSI, NON SHOCK
ACCESSORIES:
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE SR-X
EV-9798-45
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 446 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-15
CABINET WITH DROP IN SINK
QUANTITY: 01
SIZE
Width:
Depth:
Height:
900 mm
700mm
700mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Wast
e
∅
2”
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
•
•
•
•
•
0.9mm thick top SS
304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. full bottom shelf.
One (1) no. 1.6mm thick S.S. Sink of 400mm x
400mm x 200mm high with Drain Fitting. (Drop in
type)
Two (02) no. hinged door with integral Handle.
S.S. channel frame work.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 447 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-16
DROP IN GRANITE FROST TOP WITH
SNEEZE GUARD
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
800 mm
600mm
Approx
100mm
CAPACITY
M.E.P REQUIREMENT
PLUMBING :
SPECIFICATIONS
•
•
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
•
•
Power
0.5 H.P
Voltage
220v-50c-1ph.
•
•
•
ELECTRIC :
EXHAUST
•
NA
GAS:
BTU
NA
Con.
∅
•
NA
ACCESSORIES:
SPECIAL NOTE:
•
•
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
INDIA
UAE
Power cord with plug.
Accessories for installation & operation and Maintenance.
This item is located front of house & will be
highly visible , the finishing required must be first
class & will be required coordination with the
Interior designer/Interior contractor
IGLU
KIT. EQPT. SPECS
Stone top frost top (Final color as per I.D.)
Top has a drain trough and overhang around
perimeter
Exterior housing is 22-gauge S.S..
Frost top is sealed with refrigeration lines and
insulated with high-density, closed-cell polyurethane.
REFRIGERANT GAS : R-404 A
Remote Compressor housing.
Sides and bottom to be wrapped with refrigeration
lines and insulated with high-density closed-cell poly
urethane.
Equipment suitable to be drop in I.D. stone top
counter.
Unit top to be installed with seamless finish
with stone top counter.
Approx 1050mm long x 450mm (Double sided)
x 550mm high sneeze guard mounted on 50mm
dia round pipe and suitable to secured I.D.
stone top counter.
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 448 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-17
UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE:
Width:
Depth:
Height:
1550mm
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.45 k.w.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Unit installed below stone top counter by I.D
on plinth.
• All visible Exterior S.S Mirror finish to be
provided (to be confirm by I.D before
production)
• 0.9mm thick S.S. top.
• SS 304 interior and exterior.
• Six (6)no S.S Drawer with removable 1/1 G.N pans
insulation.
• With Levelers.
• Ambient temperature 43 deg C.
• Internal Temp 0 Deg C to 4 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A.
• Remote Compressor Housing.
• Digital read out thermometer, cord with time delay
auto start.
• Forced draft cooling.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating.(for condensate water
evaporation),
• Unit construction to be as per V cut Bending.
Power cord.
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
IGLU
WILLIAMS
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
CUSTOM BUILT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 449 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-18
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
Approx
650mm
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
SPECIFICATIONS
•
•
•
•
•
Power
NA
•
Voltage
NA
•
Gas:
BTU
NA
Con.
∅
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom & middle shelves.
Two (02) no. 1.2 mm thick door with handle &
locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 450 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-19
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
Approx
375mm
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
SPECIFICATIONS
•
•
•
•
•
Power
NA
•
Voltage
NA
•
Gas:
BTU
NA
Con.
∅
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom & middle shelves.
One (01) no. 1.2 mm thick door with handle &
locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 451 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-28
SOILED DISH DROP OFF TABLE W/SINK ,
& CHUTE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1950mm
750mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
2”
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
•
NA
•
EXHAUST
NA
•
GAS:
BTU
NA
Con.
∅
•
NA
•
•
•
2.0 mm Thick S.S. top,
Profile as per lay out plan.
Front turned up 75mm, returned 40mm, turned down 50mm & in
12mm.
250mm High Rear & left side splash & right as per dish washer..
Location as per plan.
Top secured 25mmx 100mm x 25mm x 1.6mm mm thick. S.S.
Channel frame work.
One (01) no. 500mm x 500mm x 300mm, 2.0mm thick. S.S. pre
wash sink, Sink Complete with 50mm dia lever handle operated
waste outlet & rear connected overflow.
One (1) no. 1.6 mm thick S.S. 50mm high Removable perforated
Strainer basket with handles. Size as per suit in sink
Six (06) no. 38mmx 38mm x 1.2mm thick S.S. square pipe legs.
With adjustable bullet feet.
25mm x 25mm x 1.2mm thick. S.S. pipe cross bracing welded to legs
at center & both sides.
0.9mm thick S.S Apron front of Sink & S.S. trough.
One (01) no. 150mm dia x 100mm high garbage chute location as per
plan.
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 452 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BK-29
GARBAGE CAN
QUANTITY: 02
SIZE
Width:
502 mm
Dia:
410 mm
CAPACITY
70 liters
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Height:
673 mm
SPECIFICATIONS
• Polyethylene Construction.
• With rust, dent, chip or peel free.
• Heavy duty Pedal Mechanism.
• Tight fitting overlapping lid.
• With Round Corner.
• 70 Liter Container Equipped with 2 full plastic Rear Wheels for
better maneuverability.
• Unit should be suitable for work in Food service area.
• Color and qty As Per operator.
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Color and qty As Per operator.
PROBBAX
S0-1271
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 453 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BK-30
PRE- RINSE SPRAY UNIT WITH FAUCET
QUANTITY: 01
SIZE
Width:
315mm
Depth:
358mm
Height:
850mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
Hot
ᴓ
Waste ᴓ
ELECTRIC :
Power
Voltage
EXHAUST
NA
GAS:
BTU
Con.
½”
½”
NA
NA
NA
SPECIFICATIONS
•
•
•
•
•
NA
ᴓ NA
ACCESSORIES:
•
•
•
•
•
Easy Install Pre-Rinse, Spring Action, 8" Wall Mount Base,
Wall Bracket, & Swivel
8" wall mount mixing faucet with polished chrome plated
brass body,
18" riser,
44" flexible stainless steel hose with heat resistant handle
and swivel,
1.42 GPM spray valve, compression cartridges with spring
checks,
lever handles,
1/2" NPT female inlets,
6" adjustable wall bracket,
spray valve holder and overhead spring.
Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9
and NSF 372. EP Act 2005 compliant
Wall mounting bracket and finger hook
SPECIAL NOTE:
T&S
B-0133-B-SWV
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 454 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BK-31
DISH WASHING MACHINE
QUANTITY: 01
SIZE
Width:
Depth:
687mm
850 mm
Height:
1470 mm
(2050 mm)
CAPACITY
30 Racks / hr As Per DIN
Standard
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
• Distinct advantages of the “Point two” generation:
Cold
ᴓ
NA
•
Hot
ᴓ
¾”
•
Waste
ᴓ
2”
•
•
•
•
ELECTRIC :
Power
10.76 KW
Voltage
400V-50Hz-3N
EXHAUST
•
NA
•
GAS:
•
•
•
BTU
NA
Con.
ᴓ
NA
•
•
•
•
ACCESSORIES:
SPECIAL NOTE:
Double-wall insulation of the hood for first class sound and
heat insulation
Upper and lower wash and rinse system in high grade stainless
steel
Deep drawn 22 litre wash tank
“Aktiv-plus” wash water filtering system.
ADT – Dishwashing with auto dosing
Excellent cleaning results, multiple filtration of the wash tank
water.
Hose and cable connection kit (water, waste, and electric’s)
Smooth interior walls easy to clean
Fully-electronic program sequence with touch sensitive control
panel and infrared interface
Self-cleaning program
Aqua-Stop-System with base drip tray
High level of operating security with the automatic water
leakage detection control
Booster pump
EWS-Technology for lowest water consumption and lowest
operating costs
MIKE Meiko control technology for maximum functionality
Soft start wash pumps with a delicate touch
G-iO Module ( Integrated reverse osmosis technology)
•
Peg type 500 mm X 500 mm molded plastic plate racks – 10 no, Open
pocket cutlery racks – 4 no, Combination 25 compartment cup/glass
rack – 8 no, Combination 36 compartment cup/glass racks - 8 no,
Hoses for detergent and rinse agent.
Unit suitable for Pass the Thermo-label. Washing cycle as per Din
Standard.
MEIKO(GERMANY)
DV80.2 with GiO Module
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 455 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-32
VAPOUR HOOD
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1200 mm
1200mm
600mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
1.2 mm thick S.S. welded body construction.
Height/exhaust Collar as per HVAC consultant.
M.S. hanger rod with turn buckles for hanging.
S.S. grease drawer with handle.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
700 C.F.M
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 456 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-33
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
550mm
350mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 457 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-34
CLEAN DISH LANDING TABLE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1350mm
750mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
•
EXHAUST
2.0 mm thick. S.S. Top.
Removable full length plastic rollers to be provided as shown
Front & right turned up 75mm, returned 40mm, turned down
50mm & in 12mm.
250mm High Rear splash, Left as per Dish washer.
Top secured 25mmx 100mm x 25mm, 2.0 mm thick . S.S.
Channel frame work.
Four (04) no. 38mm x 38mm x 1.2 mm thick S.S. square pipe
legs. With adjustable bullet feet
Full width 25 x 25 x 1.2mm thick square pipe S.S. Bottom &
Intermediate shelves.
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 458 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-35
WALL MOUNTED RACK SHELF
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1100mm
550 mm
200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
1.2mm thick S.S. Wall Mounted shelf.
Front & both side turned up 75mm, returned 40mm & in 12mm,
Rear sides turned up 75mm & hemmed.
Shelves secured to bracket with acorn S.S. nuts & bolts.
2.0mm thick S.S. wall Brackets angular shape. Secured to top with
acorn Nuts & Bolts & Bracket secured to wall with anchor
fasteners.
12mm dia Bleeder tube .
Mounting Height- 1400mm A.F.F.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 459 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BK-36
MOBILE CLEAN DISH RACK
QUANTITY: 05
SIZE
Width:
Depth:
Height:
900mm
600 mm
1900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
Five 1.2 mm thick S.S. Shelves.
Front turned up 12mm @45 deg., Rear & both sides turned up
50mm & hemmed.
S.S. hat type reinforcement
38mm x 38mm x 1.6mm thick S. S. square pipe uprights on Non
marking rubberized castors.
S.S. shelves welded to S.S. square pipe uprights.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 460 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BK-37
FLUSHING HOSE UNIT
QUANTITY: 01
SIZE
Width
Depth
Height
230 mm
538 mm
498 mm
CAPACITY
15 m hose reel.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
¾”
Hot
∅
¾”
Waste
∅
NA
ELECTRIC :
Power
Voltage
SPECIFICATIONS
• Heavy duty, cast bronze mixer body, suitable for mixing hot &
cold water.
• Furnished with steel enclosed braided Dunlop hose of 15 M
long with brass end nozzle at working end.
• Able to handle 300 PSI and high temperature
• Heavy duty S.S. Rod hose reel rack for winding hose when not
in use.
• Reel rack with stud bolts for anchoring to rear wall, unit
installed 25 mm away from wall, by inserting 25mm deep SS
bush sleeve on the stud bolts.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
T&S
FISHER
5HR-242-01
29602
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 461 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BK-38
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
550mm
550mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 462 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BK-39
HAND WASH SINK UNIT
QUANTITY: 01
SIZE
Width:
Depth:
384 mm
353 mm
CAPACITY
6 l/ min
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Wast
e
∅
1½”
ELECTRIC :
Power
NA
Voltage
NA
Height:
512 mm
SPECIFICATIONS
• Wall mounted knee-activated hand wash sink.
• S.S. construction.
• 240mm High Splash.
• Knee operated water faucet.
• Round pressed bowl.
• Depth of Wash Bowl: 150mm.
• With hot and cold water mixer.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
∅
ACCESSORIES:
•
Soap dispenser, Paper dispenser, S.S. Garbage
Bin
SPECIAL NOTE:
SOFINOR
LMASBD
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 463 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BK-40
INSECT- O- CUTOR
QUANTITY: 01
SIZE
Width:
Depth:
Height:
625 mm
250 mm
175mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• Twin tubes
• Unit suitable for ceiling suspension or mounting on wall,
• A proven approach to killing flies, conveniently and hygienically
• Unit with plastic coated M.S. guards provided
• No fumes, no chemicals, no odours –
• enviro-friendly
ELECTRIC :
Power
0.25 K.W
Voltage
220v.50c.1p
Gas:
BTU
NA
Con.
∅
NA
•
ACCESSORIES:
Power cord, Complete with mounting arrangement.
SPECIAL NOTE:
PCIL
L-L (LOW LINE) PESTOFLASH
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 464 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BK-41
WORK TOP WITH UNDER COUNTER
REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
1865 mm
700 mm
865 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.45 KW
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1.6mm thick S.S. top.
150 mm high rear & both side splash
SS 304 interior and exterior.
Six (06) no. drawer with handle.
Ambient temperature 43 deg C.
Internal Temp 0 Deg C to 4 Deg C.
Air-cooled.
REFRIGERANT GAS: R-134 A.
Housing Complete with Open able Drawer type
sliding Access.
Digital read out thermometer, cord with time delay
auto start.
Forced draft cooling.
50mm thick P.U. foam on all sides.
Drip tray with heating.(for condensate water
evaporation)
Six (06) nos. high adjustable legs.
ACCESSORIES:
SPECIAL NOTE:
FOSTER
WILLIAMS
IGLU
PRO 1/3 H DRAWER
HO3U-XNNN
equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 465 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BK-42
WALL SHELVES
QUANTITY: 02
SIZE
Width:
Depth:
Height:
1865 mm
300 mm
200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
1.2 mm thick S.S. Wall shelves.
Rear & both sides turned up 50mm & Hemmed out side, Front
turned down 38mm & in 12mm.
Shelves secured to bracket with acorn S.S. nuts & bolts.
2.0 mm thick S.S. wall Brackets. Secured to top with acorn Nuts
& Bolts & Bracket secured to wall with anchor fasteners.
Mounting Height- 1400mm a.f.f. and 1700 a.f.f.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 466 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BK-43
WORK TABLE W/SINK
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
3000 mm
700 mm
865mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Waste
∅
2”
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
EXHAUST
NA
•
•
GAS:
BTU
NA
Con.
∅
2.0mm thick S.S. Top.
150mm High Rear and left side splash.
Top secured to 12/25mm x 75mm x 25/12mm x 2.0 mm Thick S.S.
hat type welded channel frame work.
Eight (08) no. 38mm x 38mm x 1.2 mm thick S.S. square pipe legs,
with adjustable bullet feet.
Left side of unit provide One (1) no. 500mm x 500mm x 200mm
deep x 2.0mm thick S.S. sink, Sink Complete with 50mm dia lever
handle operated waste outlet & rear connected overflow.
Right side of sink provide parking space for mobile equipment
garbage can as shown., Balance Right side space provide 1.2 mm
thick S.S. Bottom shelf.
0.9mm thick S.S Apron front of sink.
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 467 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BK-44
WALL SHELVES
QUANTITY: 02
SIZE
Width:
Depth:
Height:
3000 mm
300 mm
200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
1.2 mm thick S.S. Wall shelves.
Rear & both sides turned up 50mm & Hemmed out side, Front
turned down 38mm & in 12mm.
Shelves secured to bracket with acorn S.S. nuts & bolts.
2.0 mm thick S.S. wall Brackets. Secured to top with acorn Nuts
& Bolts & Bracket secured to wall with anchor fasteners.
Mounting Height- 1400mm a.f.f. and 1700 a.f.f.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 468 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BK-45
MOBILE BAKING TRAY TROLLEY
QUANTITY: 01
SIZE
Width:
Depth:
Height:
452 mm
650 mm
1650mm
CAPACITY
18 NO.S BAKING TRAY
(TRAY SIZE 400mmx
600mm)
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
NA
Hot
ᴓ
NA
Waste
ᴓ
NA
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
ᴓ
NA
SPECIFICATIONS
• The shelf trolley consists of S/S 18/10 (AISI 304), U-profile guide
rails welded between the stable 25 x 25 mm square tubes (curved
W/out a recess). with a tip safety as well as push-through protection on
both sides for Baking tray. (Final baking tray size to be
verify/coordinate with Operator)
• A 20 x 10 mm square tube welded in elevated at mid-height on both
front and back of the shelf trolley for additional stability.
• corrosion- resistant synthetic castors (4 steering castors, 2 of locking
brakes, castor diameter 125 mm
• Material:
S/s 18/10 (AISI 304),Polyamide (PA)
• Material thickness of the
• square tube:
1.5 mm
• Material thickness of the support rails:1.2 mm
• Load-bearing capacity - 200 kg
• Number of support - pairs: 18
• Capacity:
18 x 400mm x 600mm Baking tray.
• U-profile guide rails with tip safety and push-through protection on
both sides
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
BLANCO GERMANY
HUPFER
AS PER 400mm X 600mm BAKING
TRAY (Custom built)
AS PER 400mm X 600mm
BAKING TRAY (Custom built)
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 469 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-01
PICK-UP COUNTER W/ UNDER SPACE FOR
UNDER COUNTER REFRIGERATOR &
HEATED DISH STORAGE CABINET
QUANTITY: 01
SIZE
Width:
Depth:
Height:
3400mm
1150mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
2.0 K.W.
Voltage
220v-50c-1p
EXHAUST
•
•
•
NA
GAS:
BTU
NA
Con.
∅
NA
2.0 mm thick S.S. Top.
Without splash.
All sides 0.9mm thick cladding
Top and body secured to 12/25mm x 75mm x 25/12mm x 1.6
thick S.S. hat type welded channel frame work. .
Eleven (11) no. 150mm high 38mm dia S.S. legs with S.S.
adjustable bullet feet.
Left side of unit provide mounting space for modular equipment
under counter refrigerator & balance right side provide 1.2mm
thick S.S. bottom and middle shelves.
1.2mm thick centre partition
Back side as shown provide heated dish storage cabinet
(Approx Clear 400mm internal), complete with Full width
bottom & intermediate shelves, 12mm thick Insulation top rear
and sides. Insulated sliding door with Integral handle. 2.0 K.W.
Heating element ,Control panel at left side complete with
Thermostat, on off switch, indicator & controls.
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 470 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-02
INFRA RED FOOD WARMER
QUANTITY: 02
SIZE
Width:
Depth:
Height:
1524 mm
152 mm
64 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
1.4 K.W
Voltage
220v-50c-1p
•
•
Sturdy continuous stainless steel housings.
Pre-focused heat.
Coated shatter-resistant incandescent lights
Include as standard equipment four stainless steel shelf
mounting tabs
an on-off switch to be installed to either the front or rear of the
unit.
The infrared heating element shall be tubular metal sheathed.
Suitable to mounted below of ceiling hung food pick up shelf.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
Breath protector, cord and plug set, indicator light, and infinite control
built-in.
SPECIAL NOTE:
HATCO
GRH-60
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 471 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-03
UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
1865mm
660 mm
800 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.45 K.W.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Equipment suitable to be mounted below S.S top.
304 S/S interior and exterior
0.9mm thick S.S. at back and base
Three (03) no. door with handle
Door opening as per GN. 1/1 pan.
Door activated lights
Six (06) no. shelves
Ambient temperature 43 deg C.
Internal Temp +1 Deg C to +4 Deg C.
Air-cooled.
REFRIGERANT GAS: R-134 A
Compressor , Removable Cassette type condensing unit
Rounded edge for internal chamber
Automatic defrost
Anti condensation heaters fitted to door mullions
Digital temperature controller with compressor running
indicator, defrost indicator, condensing cleaning light, fan
running indicator, high low temperature alarm.
Six (06) nos. legs with bullet feet.
ACCESSORIES:
SPECIAL NOTE:
FOASTER
WILLIAMS
IGLU
PRO1/3 H
HO3U-XDDD
equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 472 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-04
GARBAGE CAN
QUANTITY: 01
SIZE
Width:
502 mm
Dia:
410 mm
CAPACITY
70 liters
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Height:
673 mm
SPECIFICATIONS
• Polyethylene Construction.
• With rust, dent, chip or peel free.
• Heavy duty Pedal Mechanism.
• Tight fitting overlapping lid.
• With Round Corner.
• 70 Liter Container Equipped with 2 full plastic Rear Wheels for
better maneuverability.
• Unit should be suitable for work in Food service area.
• Color and qty As Per operator.
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Color and qty As Per operator.
PROBBAX
S0-1271
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 473 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-05
CEILING HUNG 2 TIER FOOD PICK UP
SHELVES
QUANTITY: 01
SIZE
Width:
Depth:
Height:
6625mm
300 mm
300mm
+1000mm
rod
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
EXHAUST
•
NA
•
•
GAS:
BTU
NA
Con.
∅
NA
•
1.2mm thick S.S. shelves.
Lower shelf all sides turned down 40mm & in 12mm, bottom of
shelves to be closed.
Upper shelf front & both sides turned down 40mm & in 12mm,
Rear turned up 50mm & hemmed, bottom of shelves to be closed.
S.S. hanger rod size as per ceiling height.
25mm x 25mm S.S. pipe hanging support.
Mounting Height-1200mm A.F.F.
Upper shelf of unit suitable mounting arrangement for infra red
food warmer.
Provide mounting arrangement for Modular equipment
Salamander and microwave oven
Four no. IP66 rated switch with socket to be provide.
Provide arrangement Electrical conduit routing ceiling to
equipment thru S.S. pipe for food warmer, microwave oven,
Salamander & under equipment Under counter refrigerator &
heated dish storage cabinet.
Two no. IP66 rated switch with socket to be provide for
Salamander & microwave oven
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 474 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-08
PICKUP COUNTER W/SINK &
HEATED DISH STORAGE CABINET
NON-
QUANTITY: 01
SIZE
Width:
Depth:
Height:
3230mm
1150mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
1/2"
Hot
∅
1/2"
Waste
∅
2"
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
EXHAUST
•
•
•
NA
GAS:
BTU
NA
Con.
∅
NA
•
2.0 mm thick S.S. Top.
Without splash.
All sides 0.9mm thick cladding
Top and body secured to 12/25mm x 75mm x 25/12mm x 1.6
thick S.S. hat type welded channel frame work. .
Twelve (12) no. 150mm high 38mm square pipe S.S. legs with
S.S. adjustable bullet feet.
As shown in plan top of unit provided one (01) no. 450 mm x
450 mm x 200mm deep, 1.6 mm thick. S.S. sinks, Sink Complete
with 50mm dia lever handle operated waste outlet & rear
connected overflow.
0.9mm thick S.S Apron front of Sink.
All side 0.9 mm thick S.S. cladding
Left side of sink provide parking space for Mobile garbage can
and balance right provide 1.2mm thick part Bottom and part
middle shelf.
0.9mm thick dbl pan centre partition Back side as shown provide
non heated dish storage cabinet (Approx Clear 400mm
internal), complete with Full width bottom & intermediate
shelves, 12mm thick Insulated sliding door with Integral handle.
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 475 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-09
MICROWAVE OVEN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
550 mm
514 mm
362 mm
CAPACITY
34 LTRS
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
1.8 K.W
Voltage
220v-50c-1p
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
Suitable to be mounted Ceiling hung Food pick up shelf
Inter & Exterior S.S Construction.
Digital display.
Countdown timer.
With Two Magnetron(s).
Programable.
Removable airs filter with clean filter reminder.
See through door,
Pull handle door opening.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
Standard Accessories.
SPECIAL NOTE:
MENU-MASTER
MERRY-CHEF
DFS 18E
HD 1925
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 476 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-13
SALAMANDER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
680 mm
430 mm
410 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
3.3 K.W
Voltage
220v-50c-1p
SPECIFICATIONS
•
•
•
•
•
•
•
•
Suitable to be mounted Ceiling hung Food pick up shelf
Electrically heated
Vertically movable top.
Two independent heating zones with separate controls.
With pull out drip tray.
Variable height level 160mm.
Power regulator radiating heating element.
Unit complete with 1 wall console with integrated panel.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
Accessories for wall mounting.
All Accessories for installation and operation.
SPECIAL NOTE:
ELECTROLUX
MKN
EQUIVLANT
0521704 Vario
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 477 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-19
SPREADER TABLE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
800 mm
850 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• Free Standing.
• S.S. Construction AISI 306.
• Under storage cupboard.
• Rear splash.
• S.S. Legs with S.S. adjustable feet.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 478 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-20
FOUR BURNER RANGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
800 mm
850 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
Equipment to Operate on gas.
Four (4) Burners open top range.
Rear splash.
Piezo ignition.
Flame failure device.
In build pressure Control regulator.
2 CNS Sliding grid.
Below under storage cupboard with handle
S.S. Legs with S.S. adjustable feet.
EXHAUST
NA
GAS:
BTU
98000
Con.
∅
¾”
ACCESSORIES:
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 479 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-21
SPREADER TABLE
QUANTITY: 04
SIZE
Width:
Depth:
Height:
400 mm
850 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• Free Standing.
• S.S. Construction AISI 306.
• Under storage cupboard.
• Rear splash.
• S.S. Legs with S.S. adjustable feet.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 480 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-21A
SPREADER TABLE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
600 mm
850 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• Free Standing.
• S.S. Construction AISI 306.
• Under storage cupboard.
• Rear splash.
• S.S. Legs with S.S. adjustable feet.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 481 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-22
PASTA COOKER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
400 mm
850 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
NA
Waste
∅
1”
ELECTRIC :
Power
7.2 K.W
Voltage
440v-50c-3p
SPECIFICATIONS
• Rear 150mm high splash.
• Inner and outer Body 304 Stainless steel
• Well capacity of Min/Max ltrs 32 / 40
• Well SIZE- 305MM w X 510MM D X 210MM H,
• Well in AISI 316 Stainless steel.
• Thermostatic Control.
• Rapid Water Filling.
• 150 mm high SS Adjustable Legs.
• Under Storage cupboard with Front hinged doors
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
mm
Water column with swivel Arm, 1 Perforated shelf, 1 standpipe with starch
collection plate and perforated cover, 4 s/s basket
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 482 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-23
DEEP FAT FRYER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
800 mm
850 mm
900mm
CAPACITY
2 X 12.5 Liter
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.2 K.W.
Voltage
220v-50c-1p
EXHAUST
NA
SPECIFICATIONS
• Gas operated equipment.
• AISI 306 Constructions.
• Rear splash.
• Unit with 2 number of frying well tanks with capacity of 25.0
liters for well.
• Two No (2) Baskets.
• 2 Lids.
• 2 oil clarifying trays.
• Unit provided with deep cold zone to collect food debris.
• Under Storage cupboard with Front hinged doors.
• S.S. Legs with S.S. adjustable feet
• Piezo ignition.
• Flame failure device.
GAS:
BTU
146845
Con.
∅
3/4
"
ACCESSORIES:
Oil Filter for fryer; Oil receptacle
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 483 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-24
GRIDDLE PLATE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1000 mm
900 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• smooth plate
• Equipment to Operate on LPG Gas.
• Freestanding Fry top.
• Rear splash.
• Cooking Surface of 964 W X640 D
• Splash Back in Stainless steel grids on three sides.
• Inner and outer Body AISI 306 Stainless steel
• S.S. Legs with S.S. adjustable feet.
• Under Storage cupboard with Front hinged doors.
• Lateral drain channel for cleaning.
• Piezo ignition.
• Flame failure device.
• Fat collecting container.
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
56689
Con.
∅
¾”
ACCESSORIES:
Scrapper with brush; Splash guard
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing
with plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 484 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-25
SIX BURNER RANGE WITH OVEN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1200 mm
850 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• Equipment to Operate on gas.
• Six (6) Burners open top range.
• Rear splash guard.
• Piezo ignition.
• Flame failure device.
• In build pressure Control regulator.
• 2 CNS Sliding grid.
• Below Gas operated oven
• Left storage cupboard.
• S.S. legs with S.S. feet.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
172116
Con.
∅
¾”
mm
ACCESSORIES:
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 485 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-26
COMBI OVEN W/STAND
QUANTITY: 01
SIZE:
Width:
Depth:
Height:
932 mm
805 mm
1120 mm
CAPACITY
10 1/1 GN Pans
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”,
¾”
(Purified)
Hot
∅
NA
Waste
∅
2”
ELECTRIC :
Power
1.0 KW
Voltage
440v-50c-3p
EXHAUST
NA
GAS:
BTU
68500
Con.
∅
¾”
ACCESSORIES:
SPECIFICATIONS
• Gas operated.
• Stainless steel 304 throughout, with seamless joints in the cooking
cell.
• Height adjustable legs. 120 – 160 mm.
• Double thermo-glazed door equipped with drip pans to catch
condensate.
• In-Built Boiler.
• With fan auto reverse.
• Oven light with shock-resistant glass cover
• Automatically Steam generator.
• Should be programmable.
• Access to main components from the front panel.
• Unit to have full, half speed and HOLD (pulse ventilation for
baking and low temperature cooking).
• Exhaust valve electronically controlled to extract the excess
humidity.
• Able to set a time to delay the start of cooking programs or to
program a break between two cooking cycles
Automatic cleaning program, Core temperature sensor, Retractable hand
shower, S.S Stand with Castors and under tray storage.
SPECIAL NOTE:
RATIONAL
SCC101G
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 486 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-26A
WATER FILTER FOR COMBI OVEN
QUANTITY: 01
SIZE
Width:
Depth:
15"
7"
Height:
18.75”
CAPACITY
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
TEMPERATURE:
80°F(27°C)
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
SPECIFICATIONS
• Sophisticated Hydro blend compound prevents lime scale
formation in high temperature steam applications.
• Fine filters incoming water to improve the performance,
maximize energy efficiency and increase the life of steam
equipment.
• Reduces chlorine-induced corrosion.
• Longer lasting SS-10 cartridge, AR-X HOUSING.
• Dip Tube for scalekleen delimer.
• (2) ScaleKleen 7oz Packets (CT System)
• NSF certified scale stick.
• Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
• KLEENSTEAM plate mounted system include 4CB5 Filter
Cartridge (ct system)
• Operating Weight is 15 lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
• WATER FROM KLEENSTEAM SYSTEM SHOULD ONLY
BE CONNECTED TO THE BOILER FEED AND NOT TO
THE CONDENSATE CONNECTION OF THE STEAMER.
10-125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE KLEENSTEAM CT
EV-979750
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 487 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-27
EXHAUST HOOD WITH UV GREASE
REMOVAL COMPLETE WITH DEMAND
CONTROL VENTILATION & FIRE
SUPRESSION SYSTEM
QUANTITY: 01
SIZE
Width
Depth
Height:
7850mm
1700 mm
555mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅ NA
Wast
e
∅ NA
SPECIFICATIONS
•
•
ELECTRIC :
Power
0.5 K.W (for
light)
Voltage
220v-50c-1p
EXHAUST
•
5225 CFM
GAS:
BTU
NA
Con.
∅
KIT. EQPT. SPECS
INDIA
UAE
•
•
•
•
The kitchen canopy shall be constructed from 1.0 mm
AISI 304 stainless steel and shall be supplied complete
with grease filters (UL listed), pressure measurement
taps, exhaust adjustment systems. The canopy shall
be HACCP certified.
The system to include lightweight stainless steel UV
lamps cassettes, directly integrated in the exhaust
plenum, behind the double stage mechanical filtration.
Cassettes should be easily removable by disconnecting
the electrical connectors.
Outer casing panels to be constructed from AISI 304
stainless steel in a brushed satin finish, in a modular
Construction. The joints of the lower edge shall be
fully welded to be liquid-tight, avoiding harmful
dripping of condensation. All exposed welds should be
ground and polished to the metal’s original finish.
The bottom edge of the exhaust plenum should be
aerodynamically designed (no flat surface).
Canopy ends shall be of double-sidewall construction.
Exhaust
The exhaust air flow will be based on the convective
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 488 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
•
•
•
•
•
KIT. EQPT. SPECS
INDIA
UAE
heat generated by the appliances under each canopy.
Submittal shall include convective heat calculations
based on the input power of the appliances served.
Grease filters
The canopy shall be equipped with a stainless steel
grease filter. The grease removal efficiency should be
95% for particles a diameter of 10 microns or larger.
The filter shall be NSF and UL classified. Baffle or slot
type grease filters shall not be used.
Exhaust Balancing dampers
Every spigot connections for extracted air shall be
supplied with an automated motorized balancing
damper. The damper shall automatically adjust
exhaust airflow based on direct pressure readings
from integral T.A.B test and balance port in the hood.
The Model ABD will have night time setback feature
which will automatically close the damper when the
exhaust system is shut down to prevent outside air
from migrating into the space. The Model ABD should
fail safe open on power interruption.
The damper outer casing shall be constructed of
continuously welded 1.2mm thick S.S.including the
balancing blades. Adjustment of the parallel dampers
(in open position) will be achieved by manually turning
the locking adjustment bracket until the desired
pressure reading is achieved.
Light Fixtures
Each canopy shall be provided with a LED light fixture
to provide approx. 500 lux at the cooking appliances
work surface. The light is protected with a stainless
steel hatch with plain milled finish, surrounded by a
tempered-glass light diffuser (the heat tolerance of the
glass shall be -40 to 300 °C).
Demand Control Ventilation
The system to come equipped with hood mounted
infrared cooking activity sensors capable of measuring
appliance surface temperatures. Infrared sensor will
read appliance surface temperature which will be
translated by the specific calculation algorithm for that
appliance and will respond proactively to any change
in cooking status. Infrared sensor and exhaust collar
mounted temperature sensor work in concert on
differential temperature reading back to the controller.
The system shall automatically control the speed of
the exhaust fan (and supply fan if applicable) based
on appliances status, cooking activities and exhaust air
temperatures. The system can be controlled with
either manual On/Off switch, a 24hrs automated
schedule with a manual override function, or the
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 489 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
hoods can be automatically regulated based on the
appliance status. The integrated PLC will analyze
signals from the cooking activity sensors, temperature
sensors and pressure transducers mounted in the
hood and then send a signal to the VFD(to be
provided by HVAC contractor) to adjust the exhaust
fan (and supply fan if applicable) speed to satisfy
current cooking load conditions, as well adjust the
automated balancing dampers accordingly. The
system can be monitored and controlled with an
internet connected PC from either a local or remote
location.
Fire Suppression system
Provide an automatic, water-assisted, wet chemical,
fire suppression System with provision of manual pull
station to be located in a path of egress at a maximum
height of 60 inches above the floor.Unit to be provided
with nozzles for equipment protection, plenum
protection and duct protection.Should provide 100%
protection as required by codes, standards, national,
state, and local requirements.Provide fusible links in
each exhaust duct cut-out and at a maximum gap of 2
feet (610mm) between them.Unit to be provided with
water inlet which would be connected to the fire pipe
line.Stainless steel pipe drops to be provided to the
discharge nozzles and plenum both. Discharge nozzles
should not exceed 610mm from each other.The
system, including all of its components, shall be UL
Standard 300/ ULC Standard ORD-C1254.6 Listed.
Automatic actuation shall be initiated by separation of
fusible links. Fusible link break temperature should be
as per the equipment below the same.
Distance of cylinder assembly & pull down points as
per lay out plan.
Unit should be complete of Gas shut off valve,
Disconnect system for Electrical equipment, Hood light
(incase of same is in a non fire rated enclosure,
Disconnect hvac system.
ACCESSORIES:
Standard accessories for installation, operations and
maintenance to be provided.
SAFETY NORMS:
UV access door closing and filters presence shall be
permanently controlled with maintenance free magnetic
proximity switches (automatic and immediate UV lamps
switch off).
• Each UV canopy section is equipped with a plug and play UV
module, integrated behind the light casing, ease of access
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 490 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
using the light hatch. Each UV module shall communicate with
a UV control panel, integrated in one of the canopy section.
The control panel displays warnings or
potential working defaults and shall be able to identify on
which canopy section where they occur and, if needed, which
ballast or lamps are concerned.
SPECIAL NOTE:
•
•
•
Fire suppression system should be installed by a certified vendor
and all testing and commissioning certificated needs to be
provided.
Minimum of five (05) years maintenance contract should be there
between the client and the fire suppression system vendor for
periodic maintenance inclusive cylinder and accessories as per fire
norms.
Detail provided in this specification in terms of number of Nozzles,
ducts cut outs , distance of unit etc. needs to be coordinated and
verified by Vendor. Any Deviation from above mention and
specification to be brought to the notice else it is expected that the
vendor in following complete specification as mentioned above.
HVAC Cutouts and fresh air cutouts to be coordinated with HVAC consultant. Shop drawing
with plan, elevation and section to be submitted for approval.
HALTON+ANSUL
UVI+ MARVEL+(P7+P13)
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 491 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-35
SLOT CHANNEL / DRAIN RAIL
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1450mm
250mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
Channels:
Material: 2mm. thick Stainless Steel Grade: 304 Pickle
Passivated. Levelling bolts to adjust height. Inclusive of foul air trap, silt
basket, drainage ring (O-ring)
Gully: Corrosion protected deep-drawn gully body stainless steel grade
304. Pickle Passivated. Gully body outer diameter is 178mm, with vertical
outlet size 110 mm diameters.
NA
Grating for Gully top: Anti-slip electro-polished stainless steel
grating,with load bar size 30mm X 2mm.Load Class L,
according to EN1253.
Gratings are made by arc-welding (not spot welding)
Side bottom Inlets :50mm Socketed Side inlet made of Pickle Passivated
Stainless Steel & EPDM seal for taking indirect waste from surrounding
kitchen equipment if any
Function
To drain heavy waste water via in-direct drainage from food service
equipment and kitchen floor.
Modular structure for gratings with smaller individual grating to fit the
size of the channel to avoid work injury from being too heavy to bulky to
handle
Slab Penetration: Requires 110mm dia waste drain connection. Requires floor cut-out and recess. Refer to
WPR drawings. Location/number of drain pipes from food service equipments to be
coordinated with MEP Consultant.
SAFETY NORMS:
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 492 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SK-36
REFER SHELVING
QUANTITY: 06
SIZE
WIDTH:
DEPTH:
HEIGHT:
914MM-03
535 MM
1830 MM
1060MM-03
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
cold
∅
NA
hot
∅
NA
waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
GAS:
BTU
NA
CON.
∅
SPECIFICATIONS
• Corrosion Proof Polymer Mats With Natural Finish
• Total five (05) no. shelves..
• Polymer Mat With Exclusive Built In Antimicrobial Product
Protection
• S.S Uprights.
• Edge Reinforced Nylon.
• With Corner Hooks
• Hanging Rails
• Shelf Support.
• Maximum Load 600 Kg Per Field.
• Adjustable Shelves
• With Adjustable S.S Feet.
• Shelving To Be Installed As Continuous Length With Common
Uprights With Maximum Distance Of 1050 Mm.
ACCESSORIES:
SPECIAL NOTE:
Space saving common use of uprights between 2 shelving units
possible, depending upon site / space conditions. The sizes and
number can verify as per the final plan of the store.
CAMBRO
HUPFER
METRO
CAMSHELVING
NORM 12
METROMAXQ
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 493 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SK-38
FREEZER SHELVING
QUANTITY: 06
SIZE
WIDTH:
DEPTH:
HEIGHT:
914MM-04
535 MM
1830 MM
1060MM-02
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
cold
∅
NA
hot
∅
NA
waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
GAS:
BTU
NA
CON.
∅
SPECIFICATIONS
• Corrosion Proof Polymer Mats With Natural Finish
• Total five (05) no. shelves..
• Polymer Mat With Exclusive Built In Antimicrobial Product
Protection
• S.S Uprights.
• Edge Reinforced Nylon.
• With Corner Hooks
• Hanging Rails
• Shelf Support.
• Maximum Load 600 Kg Per Field.
• Adjustable Shelves
• With Adjustable S.S Feet.
• Shelving To Be Installed As Continuous Length With Common
Uprights With Maximum Distance Of 1050 Mm.
ACCESSORIES:
SPECIAL NOTE:
Space saving common use of uprights between 2 shelving units
possible, depending upon site / space conditions. The sizes and
number can verify as per the final plan of the store.
CAMBRO
HUPFER
METRO
CAMSHELVING
NORM 12
METROMAXQ
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 494 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-41
PICK-UP COUNTER W/NON-HEATED DISH
STORAGE CABINET
QUANTITY: 01
SIZE
Width:
Depth:
Height:
2175mm/125
0mm
1150mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
•
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
2.0 mm thick S.S. Top.
Profile as per lay out plan/site condition
Rear & both side 0.9mm thick cladding
Top and body secured to 12/25mm x 75mm x 25/12mm x 1.6
thick S.S. hat type welded channel frame work. .
Eight (08) no. 150mm high 38mm dia S.S. legs with S.S.
adjustable bullet feet.
1.2mm thick partition
Full width 1.2 mm thick S.S. Bottom & intermediate shelves.
Left back side as shown provide non heated dish storage
cabinet (Clear 400mm internal), complete with Full width
bottom & intermediate shelves, 12mm thick Insulated sliding
door with Integral handle.
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 495 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-42
CEILING HUNG 2 TIER FOOD PICK UP
SHELVES
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1375mm
300 mm
300mm
+1000mm
rod
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
1.2mm thick S.S. shelves.
Lower shelf all sides turned down 40mm & in 12mm, bottom of
shelves to be closed.
Upper shelf front & both sides turned down 40mm & in 12mm,
Rear turned up 50mm & hemmed, bottom of shelves to be closed.
S.S. hanger rod size as per ceiling height.
25mm x 25mm S.S. pipe hanging support.
Mounting Height-1200mm A.F.F.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 496 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-44
SALAMANDER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
680 mm
430 mm
410 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
3.3 K.W
Voltage
220v-50c-1p
SPECIFICATIONS
•
•
•
•
•
•
•
•
Wall mounted
Electrically heated
Vertically movable top.
Two independent heating zones with separate controls.
With pull out drip tray.
Variable height level 160mm.
Power regulator radiating heating element.
Unit complete with 1 wall console with integrated panel.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
Accessories for wall mounting.
All Accessories for installation and operation.
SPECIAL NOTE:
ELECTROLUX
MKN
EQUIVLANT
0521704 Vario
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 497 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-45
PICK-UP COUNTER W/ UNDER SPACE FOR
UNDER COUNTER REFRIGERATOR &
HEATED DISH STORAGE CABINET
QUANTITY: 01
SIZE
Width:
Depth:
Height:
3750mm
1150mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
3.0 K.W.
Voltage
220v-50c-1p
EXHAUST
•
•
•
NA
GAS:
BTU
NA
Con.
∅
NA
2.0 mm thick S.S. Top.
150 mm right side splash.
Rear & both sides 0.9mm thick cladding
Top and body secured to 12/25mm x 75mm x 25/12mm x 1.6
thick S.S. hat type welded channel frame work. .
Fourteen (14) no. 150mm high 38mm dia S.S. legs with S.S.
adjustable bullet feet.
Right side of unit provide mounting space for modular
equipment under counter refrigerator and Balance left side
provide 1.2mm thick S.S. bottom and intermediate shelves
1.2mm thick partition
Back side as shown provide heated dish storage cabinet
(Approx Clear 400mm internal), complete with Full width
bottom & intermediate shelves, 12mm thick Insulation top rear
and sides. Insulated sliding door with Integral handle. 3.0 K.W.
Heating element . Control panel at left side complete with
Thermostat, on off switch, indicator & controls.
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 498 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-46
INFRA RED FOOD WARMER
QUANTITY: 02
SIZE
Width:
Depth:
Height:
1524 mm
152 mm
64 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
1.4 K.W
Voltage
220v-50c-1p
•
•
Sturdy continuous stainless steel housings.
Pre-focused heat.
Coated shatter-resistant incandescent lights
Include as standard equipment four stainless steel shelf
mounting tabs
an on-off switch to be installed to either the front or rear of the
unit.
The infrared heating element shall be tubular metal sheathed.
Suitable to mounted below of ceiling hung food pick up shelf.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
Breath protector, cord and plug set, indicator light, and infinite control
built-in.
SPECIAL NOTE:
HATCO
GRH-60
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 499 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-47
CEILING HUNG 2 TIER FOOD PICK UP
SHELVES
QUANTITY: 01
SIZE
Width:
Depth:
Height:
3750mm
300 mm
300mm
+1000mm
rod
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
EXHAUST
1.2mm thick S.S. shelves.
Lower shelf all sides turned down 40mm & in 12mm, bottom of
shelves to be closed.
Upper shelf front & both sides turned down 40mm & in 12mm,
Rear turned up 50mm & hemmed, bottom of shelves to be closed.
S.S. hanger rod size as per ceiling height.
25mm x 25mm S.S. pipe hanging support.
Mounting Height-1200mm A.F.F.
Upper shelf of unit suitable mounting arrangement for infra red
food warmer.
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 500 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-48
UNDER COUNTER REFRIGERATOR
QUANTITY: 02
SIZE :
Width:
Depth:
Height:
1865mm
660 mm
800 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.45 K.W.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Equipment suitable to be mounted below S.S top.
304 S/S interior and exterior
0.9mm thick S.S. at back and base
Three (03) no. door with handle
Door opening as per GN. 1/1 pan.
Door activated lights
Six (06) no. PE coated shelves
Ambient temperature 43 deg C.
Internal Temp +1 Deg C to +4 Deg C.
Air-cooled.
REFRIGERANT GAS: R-134 A
Compressor unit on right side to be provided.
Removable Cassette type condensing unit
Rounded edge for internal chamber
Automatic defrost
Anti condensation heaters fitted to door mullions
Digital temperature controller with compressor running
indicator, defrost indicator, condensing cleaning light, fan
running indicator, high low temperature alarm.
Six (06) nos. legs with bullet feet.
ACCESSORIES:
SPECIAL NOTE:
FOASTER
WILLIAMS
IGLU
PRO1/3 H
HO3U-DDDX
equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 501 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-51
WORK TABLE W/SINK
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
4400 mm
700 mm
865mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Waste
∅
2”
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
EXHAUST
•
NA
GAS:
•
BTU
NA
Con.
∅
NA
•
•
2.0mm thick S.S. Top.
150mm High Rear and right splash.
Top secured to 12/25mm x 75mm x 25/12mm x 2.0 mm Thick S.S.
hat type welded channel frame work.
Ten (10) no. 38mm x 38mm x 1.2 mm thick S.S. square pipe legs,
with adjustable bullet feet.
Left side of unit provide One (1) no. 500mm x 500mm x 200mm
deep x 2.0mm thick S.S. sink, Sink Complete with 50mm dia lever
handle operated waste outlet & rear connected overflow.
Right side of sink provide parking space for mobile equipment
garbage can as shown.,
Right side of unit provide mounting space for modular equipment
Under counter refrigerator
As shown provide one (01) no. S.S. utensil drawer complete with
handle and locking arrangement.
As shown provide 1.2mm thick S.S. bottom shelf below drawer..
0.9mm thick S.S Apron front & left of sink.
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 502 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-52
WALL SHELVES
QUANTITY: 02
SIZE
Width:
Depth:
Height:
4400 mm
300 mm
200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
1.2 mm thick S.S. Wall shelves.
Rear & both sides turned up 50mm & Hemmed out side, Front
turned down 38mm & in 12mm.
Shelves secured to bracket with acorn S.S. nuts & bolts.
2.0 mm thick S.S. wall Brackets. Secured to top with acorn Nuts
& Bolts & Bracket secured to wall with anchor fasteners.
Mounting Height- 1400mm a.f.f. and 1700 a.f.f.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 503 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-53
GARBAGE CAN
QUANTITY: 02
SIZE
Width:
502 mm
Dia:
410 mm
CAPACITY
70 liters
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Height:
673 mm
SPECIFICATIONS
• Polyethylene Construction.
• With rust, dent, chip or peel free.
• Heavy duty Pedal Mechanism.
• Tight fitting overlapping lid.
• With Round Corner.
• 70 Liter Container Equipped with 2 full plastic Rear Wheels for
better maneuverability.
• Unit should be suitable for work in Food service area.
• Color and qty As Per operator.
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Color and qty As Per operator.
PROBBAX
S0-1271
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 504 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-54
UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
2476 mm
760mm
800 mm
CAPACITY
AS PER GN. 2/1 PAN
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.65 KW
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
• Equipment mounted below S.S. top counter.
• 0.9mm thick S.S. top.
• Without splash.
• SS 304 interior and exterior.
• With 100mm high adjustable legs.
• Six (06) SS removable & Adjustable shelves.
• Three (03) no 304 S.S Doors with insulation.
• Ambient temperature 43 deg C.
• Internal Temp 0 Deg C to 4 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A.
• Housing on Right side. Complete with Open able Drawer
type sliding Access.
• Digital read out thermometer, cord with time delay auto start.
• Forced draft cooling.
• Door activated light on – off.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating.(for condensate water evaporation)
ACCESSORIES:
SPECIAL NOTE:
WILLIAMS
IGLU
ME3U-XDDD
equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 505 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-55
WORK TABLE W/SINK & UNDER SPACE
FOR UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
3750 mm
800 mm
865mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Waste
∅
2”
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
•
EXHAUST
NA
•
GAS:
BTU
NA
Con.
∅
2.0mm thick S.S. Top.
150mm High Rear and left splash.
Top secured to 12/25mm x 75mm x 25/12mm x 2.0 mm Thick S.S.
hat type welded channel frame work.
Eight (08) no. 38mm x 38mm x 1.2 mm thick S.S. square pipe
legs, with adjustable bullet feet.
Right side of unit provide One (1) no. 450mm x 450mm x 200mm
deep x 2.0mm thick S.S. sink, Sink Complete with 50mm dia lever
handle operated waste outlet & rear connected overflow.
0.9mm thick S.S Apron front & right of Sink.
Left side of sink front open for mobile equipment garbage can as
shown.
Left side provided mounting space for modular equipment Under
counter refrigerator.
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 506 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-55A
WALL SHELVES
QUANTITY: 02
SIZE
Width:
Depth:
Height:
3750 mm
300 mm
200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
1.2 mm thick S.S. Wall shelves.
Rear & both sides turned up 50mm & Hemmed out side, Front
turned down 38mm & in 12mm.
Shelves secured to bracket with acorn S.S. nuts & bolts.
2.0 mm thick S.S. wall Brackets. Secured to top with acorn Nuts
& Bolts & Bracket secured to wall with anchor fasteners.
Mounting Height- 1400mm a.f.f. and 1700 a.f.f.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 507 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-56
CHINESE STEAMER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
900 mm
1050 mm
810 mm +
440mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
NA
Waste
∅
2”
ELECTRIC :
Power
0.5 K.W
Voltage
220-50-1
EXHAUST
NA
GAS:
BTU
1,43430
Con.
∅
¾”
ACCESSORIES:
SPECIAL NOTE:
mm
SPECIFICATIONS
• Free Standing,
•
Rear 440mm high splash.
• Full 304 AISI S.S. Construction,
• In build pressure regulator.
• Covered back.
• Five (05) nos. steamer pan containers with perforated base, of
stackable design with S.S. rod handles and Stainless Steel
removable dim sum insert pans.
• One (1) no. welded Stainless Steel lid,
•
(1) Gooseneck Deck Mounted mixer Water Faucet with control
on Range.
• Unit finishes to be match with adjoining equipment.
• Ignition system protected by S/S splasher
• Drainage valve for water drainage
• Water level observation window
• 3 levels of power setting
• Electronic ignition
• Water level detection, overheat protection and flame failure
devices
• Removable water drainage
• S.S. Legs. with adjustable bullet feet.
S/S dim sum plate (7-Holes); S/S dim sum tray stand 21-3/4”;
S/S full set steam trays 540mm
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
YPT
ECS-1A
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 508 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-57
SPREADER TABLE
QUANTITY: 02
SIZE :
Width:
Depth:
Height:
550mm
1050mm
810mm+440
mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
EXHAUST
2.0mm thick S.S. Top.
440mm High rear splash ( Rear splash height and thickness to
be match adjoining equipment Chinese range)
Top and body secured to 12/25mm x 75mm x 25/12mm # 1.6 mm
Thick S.S. hat type welded channel frame work.
S.S. Legs. with adjustable bullet feet.
Rear & Both sides 1.2mm thick S.S. cladding with front hinged
door with handle.
Front profile and rear splash profile to be match adjoining
equipment Chinese range.
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
YPT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 509 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-58
CHINESE WOK RANGE
QUANTITY: 01
SIZE:
Width:
Depth:
Height:
2250 mm
1050mm
810mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½“
Hot
∅
NA
Waste
∅
2“
ELECTRIC :
Power
0.5 k.w.
Voltage
220v-50c-1ph.
EXHAUST
NA
GAS:
BTU
303925
Con.
∅
¾”
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Free Standing Chinese Wok range,
• Full S.S. Construction,
• Three no. pan support. with high pressure Burner.
•
440mm High Rear splash
• S.S. base with rear cladding
• S.S. Legs. with adjustable bullet feet.
• Two (1) no Splash mounted Water faucets to be provided,
• Piezo ignition.
• Pre-mix burner design
• One piece mold fire brick
• Extruded seamless table top
• One press design for flame failure device, blower and ignition
• Slanted table top & chamber ring
• Individual air blower
• Electromagnetic valve flame failure device (i.e. gas cutoff<3s)
• Operation noise level below 70db(A)
mm
•
Accessories: Wok Stand; Basket Holder; Cold Water Pan
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
YPT
ECR-2- RF (E)
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 510 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-59
FOUR BURNER RANGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
800 mm
850 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
Equipment to Operate on gas.
Four (4) Burners open top range.
Rear splash.
Piezo ignition.
Flame failure device.
In build pressure Control regulator.
2 CNS Sliding grid.
Below under storage cupboard with handle
S.S. Legs with S.S. adjustable feet.
EXHAUST
NA
GAS:
BTU
98000
Con.
∅
¾”
ACCESSORIES:
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 511 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-60
GRIDDLE PLATE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
800 mm
850 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• smooth plate
• Equipment to Operate on LPG Gas.
• Freestanding Fry top.
• Rear splash.
• Cooking Surface of 764 W X640 D
• Splash Back in Stainless steel grids on three sides.
• Inner and outer Body AISI 306 Stainless steel
• S.S. Legs with S.S. adjustable feet.
• Under Storage cupboard with Front hinged doors.
• Lateral drain channel for cleaning.
• Piezo ignition.
• Flame failure device.
• Fat collecting container.
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
56689
Con.
∅
¾”
ACCESSORIES:
Scrapper with brush; Splash guard
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing
with plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 512 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-61
DEEP FAT FRYER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
800 mm
850 mm
900mm
CAPACITY
2 X 12.5 Liter
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.2 K.W.
Voltage
220v-50c-1p
EXHAUST
NA
SPECIFICATIONS
• Gas operated equipment.
• AISI 306 Constructions.
• Rear splash.
• Unit with 2 number of frying well tanks with capacity of 25.0
liters for well.
• Two No (2) Baskets.
• 2 Lids.
• 2 oil clarifying trays.
• Unit provided with deep cold zone to collect food debris.
• Under Storage cupboard with Front hinged doors.
• S.S. Legs with S.S. adjustable feet
• Piezo ignition.
• Flame failure device.
GAS:
BTU
146845
Con.
∅
3/4
"
ACCESSORIES:
Oil Filter for fryer; Oil receptacle
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 513 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-62
COMBI OVEN WITHSTAND
QUANTITY: 01
SIZE:
Width:
Depth:
Height:
932 mm
805 mm
1120 mm
CAPACITY
10 1/1 GN Pans
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”,
¾”
(Purified)
Hot
∅
NA
Waste
∅
2”
ELECTRIC :
Power
1.0 KW
Voltage
440v-50c-3p
EXHAUST
NA
GAS:
BTU
68500
Con.
∅
¾”
ACCESSORIES:
SPECIFICATIONS
• Gas operated.
• Stainless steel 304 throughout, with seamless joints in the cooking
cell.
• Height adjustable legs. 120 – 160 mm.
• Double thermo-glazed door equipped with drip pans to catch
condensate.
• In-Built Boiler.
• With fan auto reverse.
• Oven light with shock-resistant glass cover
• Automatically Steam generator.
• Should be programmable.
• Access to main components from the front panel.
• Unit to have full, half speed and HOLD (pulse ventilation for
baking and low temperature cooking).
• Exhaust valve electronically controlled to extract the excess
humidity.
• Able to set a time to delay the start of cooking programs or to
program a break between two cooking cycles
Automatic cleaning program, Core temperature sensor, Retractable hand
shower, S.S Stand with Castors and under tray storage.
SPECIAL NOTE:
RATIONAL
SCC101G
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 514 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-62A
WATER FILTER FOR COMBI OVEN
QUANTITY: 01
SIZE
Width:
Depth:
15"
7"
Height:
18.75”
CAPACITY
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
TEMPERATURE:
80°F(27°C)
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
SPECIFICATIONS
• Sophisticated Hydro blend compound prevents lime scale
formation in high temperature steam applications.
• Fine filters incoming water to improve the performance,
maximize energy efficiency and increase the life of steam
equipment.
• Reduces chlorine-induced corrosion.
• Longer lasting SS-10 cartridge, AR-X HOUSING.
• Dip Tube for scalekleen delimer.
• (2) ScaleKleen 7oz Packets (CT System)
• NSF certified scale stick.
• Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
• KLEENSTEAM plate mounted system include 4CB5 Filter
Cartridge (ct system)
• Operating Weight is 15 lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
• WATER FROM KLEENSTEAM SYSTEM SHOULD ONLY
BE CONNECTED TO THE BOILER FEED AND NOT TO
THE CONDENSATE CONNECTION OF THE STEAMER.
10-125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE KLEENSTEAM CT
EV-979750
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 515 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-63
SPREADER TABLE
QUANTITY: 02
SIZE
Width:
Depth:
Height:
400 mm
900 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• Free Standing.
• S.S. Construction AISI 306.
• Under storage cupboard.
• Rear splash.
• S.S. Legs with S.S. adjustable feet.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 516 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-64
EXHAUST HOOD WITH UV GREASE
REMOVAL COMPLETE WITH DEMAND
CONTROL VENTILATION & FIRE
SUPRESSION SYSTEM
QUANTITY: 01
SIZE
Width
Depth
Height:
4300mm
3300mm
555mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅ NA
Wast
e
∅ NA
SPECIFICATIONS
•
•
ELECTRIC :
Power
0.5 K.W (for
light)
Voltage
220v-50c-1p
EXHAUST
•
9100 CFM
GAS:
BTU
NA
Con.
∅
KIT. EQPT. SPECS
INDIA
UAE
•
•
•
•
The kitchen canopy shall be constructed from 1.0 mm
AISI 304 stainless steel and shall be supplied complete
with grease filters (UL listed), pressure measurement
taps, exhaust adjustment systems. The canopy shall
be HACCP certified.
The system to include lightweight stainless steel UV
lamps cassettes, directly integrated in the exhaust
plenum, behind the double stage mechanical filtration.
Cassettes should be easily removable by disconnecting
the electrical connectors.
Outer casing panels to be constructed from AISI 304
stainless steel in a brushed satin finish, in a modular
Construction. The joints of the lower edge shall be
fully welded to be liquid-tight, avoiding harmful
dripping of condensation. All exposed welds should be
ground and polished to the metal’s original finish.
The bottom edge of the exhaust plenum should be
aerodynamically designed (no flat surface).
Canopy ends shall be of double-sidewall construction.
Exhaust
The exhaust air flow will be based on the convective
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 517 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
•
•
•
•
•
KIT. EQPT. SPECS
INDIA
UAE
heat generated by the appliances under each canopy.
Submittal shall include convective heat calculations
based on the input power of the appliances served.
Grease filters
The canopy shall be equipped with a stainless steel
grease filter. The grease removal efficiency should be
95% for particles a diameter of 10 microns or larger.
The filter shall be NSF and UL classified. Baffle or slot
type grease filters shall not be used.
Exhaust Balancing dampers
Every spigot connections for extracted air shall be
supplied with an automated motorized balancing
damper. The damper shall automatically adjust
exhaust airflow based on direct pressure readings
from integral T.A.B test and balance port in the hood.
The Model ABD will have night time setback feature
which will automatically close the damper when the
exhaust system is shut down to prevent outside air
from migrating into the space. The Model ABD should
fail safe open on power interruption.
The damper outer casing shall be constructed of
continuously welded 1.2mm thick S.S.including the
balancing blades. Adjustment of the parallel dampers
(in open position) will be achieved by manually turning
the locking adjustment bracket until the desired
pressure reading is achieved.
Light Fixtures
Each canopy shall be provided with a LED light fixture
to provide approx. 500 lux at the cooking appliances
work surface. The light is protected with a stainless
steel hatch with plain milled finish, surrounded by a
tempered-glass light diffuser (the heat tolerance of the
glass shall be -40 to 300 °C).
Demand Control Ventilation
The system to come equipped with hood mounted
infrared cooking activity sensors capable of measuring
appliance surface temperatures. Infrared sensor will
read appliance surface temperature which will be
translated by the specific calculation algorithm for that
appliance and will respond proactively to any change
in cooking status. Infrared sensor and exhaust collar
mounted temperature sensor work in concert on
differential temperature reading back to the controller.
The system shall automatically control the speed of
the exhaust fan (and supply fan if applicable) based
on appliances status, cooking activities and exhaust air
temperatures. The system can be controlled with
either manual On/Off switch, a 24hrs automated
schedule with a manual override function, or the
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 518 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
hoods can be automatically regulated based on the
appliance status. The integrated PLC will analyze
signals from the cooking activity sensors, temperature
sensors and pressure transducers mounted in the
hood and then send a signal to the VFD(to be
provided by HVAC contractor) to adjust the exhaust
fan (and supply fan if applicable) speed to satisfy
current cooking load conditions, as well adjust the
automated balancing dampers accordingly. The
system can be monitored and controlled with an
internet connected PC from either a local or remote
location.
Fire Suppression system
Provide an automatic, water-assisted, wet chemical,
fire suppression System with provision of manual pull
station to be located in a path of egress at a maximum
height of 60 inches above the floor.Unit to be provided
with nozzles for equipment protection, plenum
protection and duct protection.Should provide 100%
protection as required by codes, standards, national,
state, and local requirements.Provide fusible links in
each exhaust duct cut-out and at a maximum gap of 2
feet (610mm) between them.Unit to be provided with
water inlet which would be connected to the fire pipe
line.Stainless steel pipe drops to be provided to the
discharge nozzles and plenum both. Discharge nozzles
should not exceed 610mm from each other.The
system, including all of its components, shall be UL
Standard 300/ ULC Standard ORD-C1254.6 Listed.
Automatic actuation shall be initiated by separation of
fusible links. Fusible link break temperature should be
as per the equipment below the same.
Distance of cylinder assembly & pull down points as
per lay out plan.
Unit should be complete of Gas shut off valve,
Disconnect system for Electrical equipment, Hood light
(incase of same is in a non fire rated enclosure,
Disconnect hvac system.
ACCESSORIES:
Standard accessories for installation, operations and
maintenance to be provided.
SAFETY NORMS:
UV access door closing and filters presence shall be
permanently controlled with maintenance free magnetic
proximity switches (automatic and immediate UV lamps
switch off).
• Each UV canopy section is equipped with a plug and play UV
module, integrated behind the light casing, ease of access
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 519 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
using the light hatch. Each UV module shall communicate with
a UV control panel, integrated in one of the canopy section.
The control panel displays warnings or
potential working defaults and shall be able to identify on
which canopy section where they occur and, if needed, which
ballast or lamps are concerned.
SPECIAL NOTE:
•
•
•
Fire suppression system should be installed by a certified vendor
and all testing and commissioning certificated needs to be
provided.
Minimum of five (05) years maintenance contract should be there
between the client and the fire suppression system vendor for
periodic maintenance inclusive cylinder and accessories as per fire
norms.
Detail provided in this specification in terms of number of Nozzles,
ducts cut outs , distance of unit etc. needs to be coordinated and
verified by Vendor. Any Deviation from above mention and
specification to be brought to the notice else it is expected that the
vendor in following complete specification as mentioned above.
HVAC Cutouts and fresh air cutouts to be coordinated with HVAC consultant. Shop drawing
with plan, elevation and section to be submitted for approval.
HALTON+ANSUL
UVI+
MARVEL+(P7+P7+P13)
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 520 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-65
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1500mm
350mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 521 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-66
SERVICE CONSOLE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
4250mm
200mm.
1250mm+Up
false ceiling
to
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
SPECIFICATIONS
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
Power
NA
•
•
Voltage
NA
ELECTRIC :
S.S 304 1.2 mm thick Construction.
Removable Panel.
Suitable to be mounted above floor.
Pre-piped for Water, Drainage, Electrical Services required as per
cooking battery.
Three section for water, Electrical and gas services
Removable panels
Gas:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with plan,
elevation and section to be submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 522 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-73
MOBILE GN PAN TROLLEY
QUANTITY: 02
SIZE
Width:
Depth:
Height:
662 mm
734 mm
1645mm
CAPACITY
18 GN 2/1 or 36 GN 1/1
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
SPECIFICATIONS
• The shelf trolley consists of S/S 18/10 (AISI 304), U-profile guide
rails welded between the stable 25 x 25 mm square tubes (curved
W/out a recess). with a tip safety as well as push-through protection on
both sides for GN 2/1, 1/1 and 2/4.
• A 20 x 10 mm square tube welded in elevated at mid-height on both
front and back of the shelf trolley for additional stability.
• corrosion- resistant synthetic castors (4 steering castors, 2 of locking
brakes, castor diameter 125 mm
• Material:
S/s 18/10 (AISI 304),Polyamide (PA)
• Material thickness of the
• square tube:
1.5 mm
• Material thickness of the support rails:1.2 mm
• Load-bearing capacity - 200 kg
• Number of support - pairs: 18
• Capacity:
18 x GN 2/1 or36 x GN 1/1
• U-profile guide rails with tip safety and push-through protection on
both sides
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 523 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-74
STORAGE SHELVING
QUANTITY: 04
SIZE
WIDTH:
DEPTH:
HEIGHT:
1060MM
610 MM
2000 MM
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
cold
∅
NA
hot
∅
NA
waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
GAS:
BTU
NA
CON.
∅
SPECIFICATIONS
• Corrosion Proof Polymer Mats With Natural Finish
• Total five (05) no. shelves..
• Polymer Mat With Exclusive Built In Antimicrobial Product
Protection
• S.S Uprights.
• Edge Reinforced Nylon.
• With Corner Hooks
• Hanging Rails
• Shelf Support.
• Maximum Load 600 Kg Per Field.
• Adjustable Shelves
• With Adjustable S.S Feet.
• Shelving To Be Installed As Continuous Length With Common
Uprights With Maximum Distance Of 1050 Mm.
ACCESSORIES:
SPECIAL NOTE:
Space saving common use of uprights between 2 shelving units
possible, depending upon site / space conditions. The sizes and
number can verify as per the final plan of the store.
CAMBRO
HUPFER
METRO
CAMSHELVING
NORM 12
METROMAXQ
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 524 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-75
DRAIN TROUGH GRATING
QUANTITY: 14
SIZE
Width:
Depth:
Height:
350mm
350mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 525 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-76
INSECT- O- CUTOR
QUANTITY: 14
SIZE
Width:
Depth:
Height:
625 mm
250 mm
175mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• Twin tubes
• Unit suitable for ceiling suspension or mounting on wall,
• A proven approach to killing flies, conveniently and hygienically
• Unit with plastic coated M.S. guards provided
• No fumes, no chemicals, no odours –
• enviro-friendly
ELECTRIC :
Power
0.25 K.W
Voltage
220v.50c.1p
Gas:
BTU
NA
Con.
∅
NA
•
ACCESSORIES:
Power cord, Complete with mounting arrangement.
SPECIAL NOTE:
PCIL
L-L (LOW LINE) PESTOFLASH
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 526 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-80
MOBILE ICE BIN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
590 mm
765 mm
740 mm
CAPACITY
45.5 KGS
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• Capacity 45.5 kg.
• Polyethylene body
• Double wall and deep insulation will hold ice for extended
periods.
• Rust and corrosion-proof polymer construction.
•
Large rear wheels and front swivel casters.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Unit Exterior Color & finishing to be confirmed by Operator
CAMBRO
METRO
ICS100L
IC 125
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 527 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-81
WATER COOLER
QUANTITY: 01
SIZE
Width:
750 mm
Depth:
600mm
CAPACITY
180 lt
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ ¾”
(Purified)
Hot
∅ NA
Waste
∅
1”
ELECTRIC :
Power
0.5 H.P
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
Height:
As per cap.
SPECIFICATIONS
•
•
•
•
•
•
•
•
Full S.S Construction
AISI 304 SS exterior and interior
Freestanding
SS legs.
All S.S construction and finish.
Provided with Two (2) no. of faucet.
Refrigerant gas R-22 to be used.
S S drip pan.
NA
ACCESSORIES:
SPECIAL NOTE:
Power Cord with plug
BLUE STAR OR EQUIVLANT
CAP-180 LTRS.
LOCAL MARKET EQUIPMENT BYCLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 528 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-81A
WATER FILTER FOR WATER COOLER
QUANTITY: 02
SIZE
Width:
Depth:
Height:
8.04”
5.25”
7.59”
CAPACITY
9000 GALLONS
(34069 liters)
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
SPECIFICATIONS
• NSF certified scale stick.
• Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
• Include built in water shut-off valve system.
• Built in water pressure gauge.
• Shipping Weight is 6lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
TEMPERATURE:
80°F(27°C)
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
10-125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE
QC71 SINGLE-MH2
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 529 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-82
ICE CUBE MACHINE W/BIN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1220mm
863 mm
1950 mm
CAPACITY
830 kg per day
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
3/8”
(Purified)
Hot
∅
NA
Waste
∅
½”
¾”
and
ELECTRIC :
Power
3.0 HP
Voltage
220v-50c-1p
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
Air cooled.
Unit should be able to work in ambient temperature 43.3o C
Unit with automatic cleaning system.
Removable water distribution tube with no tools.
With cove corners.
Liquid refrigerant shut off valve.
Suction refrigerant shut off valve
Cleaning and with antimicrobial.
Programmable ice production.
Dice production size is 22.2 X 22.2 X 22.2.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
With Scoop , scoop holder and Ice Storage Bin
SPECIAL NOTE:
MANITOWOC
SCOTSMAN
SD-1802 A
Equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 530 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-82A
WATER FILTER FOR ICE CUBE MACHINE
WITH i20002 REPLACEMENT CARTRIDGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
8.04”
5.25”
7.59”
CAPACITY
9000 GALLONS
(34069ltrs)
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
TEMPERATURE:
35 - 100°F(2 - 38°C)
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
SPECIFICATIONS
• Sophisticated Hydro blend compound prevents lime scale
formation in high temperature steam applications.
• Fine filters incoming water to improve the performance,
maximize energy efficiency and increase the life of steam
equipment.
• New and improved Micro-pure ΙΙ media with AgION
antimicrobial protection.
• Self-contained scale inhibitor.
• Pre coat submicron technology
• NSF certified under NSF/ANSI Standards 42 and 53.
• Features include: Bacteriostatic, Cyst reduction, Particulate
reduction, Scale control.
• Micron rating is up to 0.50.
• Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
• Cartridge dimensions are 20.75”H & 3.25”Diameter.
• Shipping Weight is 6lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
10-125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE QC71 SINGLE HEAD
EV-927241 & EV-961222
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 531 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-83
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
2100mm
350mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 532 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-84
WORK TABLE W/SINK
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
3800mm
700 mm
865mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
ᴓ
½”
Hot
ᴓ
½”
Waste
ᴓ
2”
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
EXHAUST
•
NA
GAS:
BTU
NA
Con.
ᴓ
•
•
NA
2.0mm thick S.S. Top.
150mm High Rear & both side Splash.
Top secured to 12/25mm x 75mm x 25/12mm x 1.6 mm Thick S.S.
hat type welded channel frame work.
Left of unit One (1) no. 500mm x 500mm x 300mm deep, 2.0mm
thick S.S. sink, Sink Complete with 50mm dia lever handle
operated waste outlet & rear connected overflow.
Ten (10) no. 38mm x 38mm x 1.2 mm thick S.S. square pipe. Legs
with adjustable bullet feet.
Right side of sink provide parking space for Modular equipment
mobile garbage can.
As show provide two (02) no. S.S. utensil drawer, complete with
handle and locking arrangement.
0.9mm thick S.S Apron front of Sink.
As shown Right side balance space provided 1.2mm thick bottom
and middle shelf.
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 533 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-85
WALL SHELVES
QUANTITY: 02
SIZE
Width:
Depth:
Height:
3800 mm
300 mm
200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
1.2 mm thick S.S. Wall shelves.
Rear & both sides turned up 50mm & Hemmed out side, Front
turned down 38mm & in 12mm.
Shelves secured to bracket with acorn S.S. nuts & bolts.
Three (03) no. 2.0 mm thick S.S. wall Brackets. Secured to top
with acorn Nuts & Bolts & Bracket secured to wall with anchor
fasteners.
Mounting Height- 1400mm a.f.f. and 1700 a.f.f.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 534 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SK-88
WORK TABLE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
3200mm
700 mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
2.0 mm thick S.S. Top.
150mm High Rear and both sides Splash.
Top secured to 12/25mm x 75mm x 25/12mm x 1.6 mm Thick
S.S. hat type welded channel frame work.
Full width 1.2 mm thick S.S. Bottom & intermediate shelves.
Six (06) no. 38mm x 38mm x 1.6mm thick S.S. square pipe legs.
With adjustable bullet feet.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 535 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-89
WALL SHELVES
QUANTITY: 02
SIZE
Width:
Depth:
Height:
3200 mm
300 mm
200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
1.2 mm thick S.S. Wall shelves.
Rear & both sides turned up 50mm & Hemmed out side, Front
turned down 38mm & in 12mm.
Shelves secured to bracket with acorn S.S. nuts & bolts.
Three (03) no. 2.0 mm thick S.S. wall Brackets. Secured to top
with acorn Nuts & Bolts & Bracket secured to wall with anchor
fasteners.
Mounting Height- 1400mm a.f.f. and 1700 a.f.f.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 536 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-96
STORE ROOM SHELVING- DAY STORE
QUANTITY: 11
SIZE
WIDTH:
DEPTH:
HEIGHT:
914MM-04
535 MM
2000 MM
1060MM-07
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
cold
∅
NA
hot
∅
NA
waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
GAS:
BTU
NA
CON.
∅
SPECIFICATIONS
• Corrosion Proof Polymer Mats With Natural Finish
• Total five (05) no. shelves..
• Polymer Mat With Exclusive Built In Antimicrobial Product
Protection
• S.S Uprights.
• Edge Reinforced Nylon.
• With Corner Hooks
• Hanging Rails
• Shelf Support.
• Maximum Load 600 Kg Per Field.
• Adjustable Shelves
• With Adjustable S.S Feet.
• Shelving To Be Installed As Continuous Length With Common
Uprights With Maximum Distance Of 1050 Mm.
ACCESSORIES:
SPECIAL NOTE:
Space saving common use of uprights between 2 shelving units
possible, depending upon site / space conditions. The sizes and
number can verify as per the final plan of the store.
CAMBRO
HUPFER
METRO
CAMSHELVING
NORM 12
METROMAXQ
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 537 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-97
STORE ROOM SHELVING
QUANTITY: 06
SIZE
WIDTH:
DEPTH:
HEIGHT:
914MM-01
535 MM
2000 MM
1060MM-05
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
cold
∅
NA
hot
∅
NA
waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
GAS:
BTU
NA
CON.
∅
SPECIFICATIONS
• Corrosion Proof Polymer Mats With Natural Finish
• Total five (05) no. shelves..
• Polymer Mat With Exclusive Built In Antimicrobial Product
Protection
• S.S Uprights.
• Edge Reinforced Nylon.
• With Corner Hooks
• Hanging Rails
• Shelf Support.
• Maximum Load 600 Kg Per Field.
• Adjustable Shelves
• With Adjustable S.S Feet.
• Shelving To Be Installed As Continuous Length With Common
Uprights With Maximum Distance Of 1050 Mm.
ACCESSORIES:
SPECIAL NOTE:
Space saving common use of uprights between 2 shelving units
possible, depending upon site / space conditions. The sizes and
number can verify as per the final plan of the store.
CAMBRO
HUPFER
METRO
CAMSHELVING
NORM 12
METROMAXQ
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 538 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-98
STORE
STORE
ROOM
SHELVING-
STEWARDING
QUANTITY: 24
SIZE
WIDTH:
DEPTH:
HEIGHT:
914MM-04
535 MM
2000 MM
1060MM-20
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
cold
∅
NA
hot
∅
NA
waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
GAS:
BTU
NA
CON.
∅
SPECIFICATIONS
• Corrosion Proof Polymer Mats With Natural Finish
• Total five (05) no. shelves..
• Polymer Mat With Exclusive Built In Antimicrobial Product
Protection
• S.S Uprights.
• Edge Reinforced Nylon.
• With Corner Hooks
• Hanging Rails
• Shelf Support.
• Maximum Load 600 Kg Per Field.
• Adjustable Shelves
• With Adjustable S.S Feet.
• Shelving To Be Installed As Continuous Length With Common
Uprights With Maximum Distance Of 1050 Mm.
ACCESSORIES:
SPECIAL NOTE:
Space saving common use of uprights between 2 shelving units
possible, depending upon site / space conditions. The sizes and
number can verify as per the final plan of the store.
CAMBRO
HUPFER
METRO
CAMSHELVING
NORM 12
METROMAXQ
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 539 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SK-101
U-SHAPED SOILED DISH DROP OFF TABLE
W/SINK , RACK SHELF & CHUTE
QUANTITY: 01
SIZE
Width:
3400mm+1650mm+1
375mm
Depth:
Height:
1050mm+750m
m
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
2”
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
•
NA
EXHAUST
NA
•
GAS:
BTU
NA
Con.
∅
•
NA
•
•
•
•
2.0 mm Thick S.S.
U- Shaped top, profile as per lay out plan.
Front and rear sides (drop off) turned up 75mm, returned 40mm,
turned down 50mm & in 12mm.
250mm High splash Rear & sides against wall. Location as per plan.
Top secured 25mmx 100mm x 25mm x 1.6mm mm thick. S.S.
Channel frame work.
One (01) no. 500mm x 500mm x 300mm, 2.0mm thick. S.S. pre
wash sink, Sink Complete with 50mm dia lever handle operated
waste outlet & rear connected overflow.
One (1) no. 1.6 mm thick S.S. 50mm high Removable perforated
Strainer basket with handles. Size as per suit in sink
Sixteen (16) no. 38mmx 38mm x 1.2mm thick S.S. square pipe legs.
With adjustable bullet feet. (Rear side of drop off table legs as per
site low height masonry wall/drop-off opening.
25mm x 25mm x 1.2mm thick. S.S. pipe cross bracing welded to legs
at Front & both sides.
0.9mm thick S.S Apron front of Sink & S.S. trough.
Two (02) no. 150mm dia x 100mm high garbage chute location as
per plan.
One (01) approx no 3400mm long & one no. 1650mm long x 1.2mm
thick table mounted rack shelf
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 540 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-102
SOAKING TROLLEY
QUANTITY: 01
SIZE
Width:
Depth:
Height:
650 mm
650 mm
610mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
EXHAUST
•
NA
2.0mm thick S.S. w/all sides channel shape.
535mm X 535mm X 305mm deep 1.6mm thick S.S. with all
corners coved 20mm radius , Complete with 38mm dia lever
handle operated waste outlet with Tail pipe extended at 50mm
A.F.F.
38mm x 38mm x 1.6mm thick S.S. pipe legs on castor.
(4) no. 102 mm dia Non marking rubberized castors two with
brakes.
25mm x 25mm x 1.6mm thick S.S. pipe cross bracing at rear &
both sides.
One (1) no. 1.6 mm thick S.S. 50mm high Removable perforated
Strainer basket with handles. Size as per suit in sink
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 541 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-103
GARBAGE CAN
QUANTITY: 02
SIZE
Width:
502 mm
Dia:
410 mm
CAPACITY
70 liters
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Height:
673 mm
SPECIFICATIONS
• Polyethylene Construction.
• With rust, dent, chip or peel free.
• Heavy duty Pedal Mechanism.
• Tight fitting overlapping lid.
• With Round Corner.
• 70 Liter Container Equipped with 2 full plastic Rear Wheels for
better maneuverability.
• Unit should be suitable for work in Food service area.
• Color and qty As Per operator.
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Color and qty As Per operator.
PROBBAX
S0-1271
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 542 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-104
PRE- RINSE SPRAY UNIT WITH FAUCET
QUANTITY: 01
SIZE
Width:
315mm
Depth:
358mm
Height:
850mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
Hot
ᴓ
Waste ᴓ
ELECTRIC :
Power
Voltage
EXHAUST
NA
GAS:
BTU
Con.
½”
½”
NA
NA
NA
SPECIFICATIONS
•
•
•
•
•
NA
ᴓ NA
ACCESSORIES:
•
•
•
•
•
Easy Install Pre-Rinse, Spring Action, 8" Wall Mount Base,
Wall Bracket, & Swivel
8" wall mount mixing faucet with polished chrome plated
brass body,
18" riser,
44" flexible stainless steel hose with heat resistant handle
and swivel,
1.42 GPM spray valve, compression cartridges with spring
checks,
lever handles,
1/2" NPT female inlets,
6" adjustable wall bracket,
spray valve holder and overhead spring.
Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9
and NSF 372. EP Act 2005 compliant
Wall mounting bracket and finger hook
SPECIAL NOTE:
T&S
B-0133-B-SWV
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 543 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-105
RACK TYPE DISH WASHING MACHINE
WITH DRYER AND CLEAN DISH ROLLER
QUANTITY: 01
SIZE
Width:
Depth:
1900mm
with
Dryer+1800mm
ROLLER
835 mm
CAPACITY
(DIN) 80 Racks/h
(max.) 160 Racks/h
M.E.P REQUIRMENT
PLUMBING :
Cold
¾”
Hot
Waste
2”
ELECTRIC :
Power
37,40 KW
Voltage
400V-50Hz-3N
EXHAUST
Exhaust air volume approx.
150 m³/h
GAS:
BTU
NA
Con.
NA
KIT. EQPT. SPECS
INDIA
UAE
Height:
1900
mm
SPECIFICATIONS
• Rack type dishwashing machine
• Working direction: Right to left operation
• Dryer TR with heat recovery system
• 1800mm Clean dish Roller
• Heating: Electric
• Fresh water final rinse: Soft - cold water
• Performance- (DIN SPEC 10534) Contact time 2 minutes
Transport speed - (DIN) 0,65 m/min
• Transport speed (max.) 1,30 m/min
• Motors Total 3,4kW
• Heating energies Total 34,00Kw
• Total connected load : 37,40KW
• Consumption**Average consumption during typical
operation: 25,80 kW
• Electrical feeding cable Power supply 3N PE 400V 50Hz Max.
rated current 57,9 A
• Max. Elect. cable cross-section 35 mm²
• Fresh water Fresh water final rinse: soft cold 260L/H water
Tank filling Soft - warm water 80L
• Air outlet*** Waste air volume approx. 150 m³/h
• Waste air temperature approx. 30 °C
• All electrical connections are executed as coded plugs
• Intelligent water level control
• Machine design doesn’t require extraction system – the
machine makes the best use of waste energy resources
• Glass display panel at eye level made from safety glass
• which is easy to keep hygienically clean
• Hinged doors in the wash zone provide easy access to the
• wash arms
• Autotimer Maximum efficiency: saves water, energy and
chemicals
• Stainless steel manifold wash systems with 9 wash arms
• and non-blocking wash nozzles
• Three speed washing
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 544 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
Suitable for rack size to be 500 mm X 500 mm
Emergency stop switch on clean dish side
ACCESSORIES:
Two (2) sets of strip curtains throughout machine, Molded
standard 500mm X 500 mm size, plastic dish racks
comprising of 20 Peg type plate racks, Open pocket cutlery
racks, 6 no, Power Cord with Plug.
SPECIAL NOTE:
Unit Should be as per Thermo-label and washing cycle as
per DIN Standard.
MEIKO
UPster K-S 160 with
Dryer+roller
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 545 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SK-106
VAPOUR HOOD
QUANTITY: 01
SIZE
Width:
Depth:
Height:
2250mm
1200 mm
600mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
1.2 mm thick S.S. welded body construction.
Height/exhaust Collar as per HVAC consultant.
M.S. hanger rod with turn buckles for hanging.
S.S. grease drawer with handle.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
1000 C.F.M
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUIL
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 546 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SK-107
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1200mm
350mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 547 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SK-109
WALL MOUNTED RACK SHELF
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1600mm
550 mm
200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
1.2mm thick S.S. Wall Mounted shelf.
Front & both side turned up 75mm, returned 40mm & in 12mm,
Rear sides turned up 75mm & hemmed.
Shelves secured to bracket with acorn S.S. nuts & bolts.
(2) No. 2.0mm thick S.S. wall Brackets angular shape. Secured to
top with acorn Nuts & Bolts & Bracket secured to wall with
anchor fasteners.
12mm dia Bleeder tube at Left side.
Mounting Height- 1400mm A.F.F.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 548 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-110
FLUSHING HOSE UNIT
QUANTITY: 01
SIZE
Width
Depth
Height
230 mm
538 mm
498 mm
CAPACITY
15 m hose reel.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
¾”
Hot
∅
¾”
Waste
∅
NA
ELECTRIC :
Power
Voltage
SPECIFICATIONS
• Heavy duty, cast bronze mixer body, suitable for mixing hot &
cold water.
• Furnished with steel enclosed braided Dunlop hose of 15 M
long with brass end nozzle at working end.
• Able to handle 300 PSI and high temperature
• Heavy duty S.S. Rod hose reel rack for winding hose when not
in use.
• Reel rack with stud bolts for anchoring to rear wall, unit
installed 25 mm away from wall, by inserting 25mm deep SS
bush sleeve on the stud bolts.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
T&S
FISHER
5HR-242-01
29602
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 549 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-111
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
550mm
550mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 550 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-112
POCKER CHIP DOLLEY
QUANTITY: 01
SIZE
Width:
Depth:
Height:
677 mm
677 mm
812 mm
CAPACITY
Approximately
Columns.
45-60
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
Per
SPECIFICATIONS
• Should be adjustable to hold plates from 117 to 330 mm in diameter.
• Each caddy to include six adjustable towers.
• With polyethylene exterior that should not crack or chip.
• Vinyl covers to be included.
• 127 mm front swivel casters with brake and non-marking rear wheels.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
COLOUR TO BE CO ORDINATED WITH OPERATER
CO-ORDINATION REQUIRMENT
CAMBRO
METRO.
DCS950
KIT. EQPT. SPECS
INDIA
UAE
PCD11A
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 551 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-115
POT WASH THREE SINK UNIT
QUANTITY: 01
SIZE
Width:
Depth:
Height:
2200mm
800 mm
750mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
(2)½”
Hot
∅
(2)½”
Waste
∅
(3)2”
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
EXHAUST
•
NA
•
GAS:
BTU
NA
Con.
∅
2.0 mm Thick S.S. Top.
250mm High Rear & both sides Splash. Front turned up 25mm,
returned 40mm, down 75mm & in 12mm.
Top secured to 12/25mm x 75mm x 25/12mm x 1.6 mm Thick
S.S. hat type welded channel frame work.
Center of top provided three (03) no. 600mm x 600mm x 350mm
deep, 2.0mm thick. S.S. sinks, Sink Complete with 50mm dia
lever handle operated waste outlet & rear connected overflow.
Six (06) no. 38mmx 38mm x 1.6mm thick. S.S. square pipe legs.
With adjustable bullet feet.
25mm x 25mm x 1.6mm thick S.S. pipe cross bracing welded to
legs at Rear & both sides.
0.9mm thick S.S Apron front of Sink.
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 552 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-116
WALL MOUNTED POT RACK
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1200mm
375 mm
245 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
Four (4) no. 25mm x 25mm X 16 ga. S. S. square pipe welded
construction.
75mm high splash/railing at rear & both sides.
S.S. pipe shelf welded to S.S. brackets.
Three (3) no. 2.0 mm thick S.S. wall Brackets. Secured to top
with acorn Nuts & Bolts & Bracket secured to wall with anchor
fasteners.
Mounting Height- 1500mm A.F.F.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 553 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-117
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1200mm
600mm
150 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 150mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 554 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SK-118
MOBILE CLEAN DISH RACK
QUANTITY: 06
SIZE
Width:
Depth:
Height:
900 mm
600 mm
1900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
Five 1.2 mm thick S.S. Shelves.
Front turned up 12mm @45 deg., Rear & both sides turned up
50mm & hemmed.
S.S. hat type reinforcement
38mm x 38mm x 1.6mm thick S. S. square pipe uprights on Non
marking rubberized castors.
S.S. shelves welded to S.S. square pipe uprights.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 555 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-119
MOBILE POT RACK
QUANTITY: 02
SIZE
Width:
Depth:
Height:
900mm
600 mm
1900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
Four (4) no. S.S. pipe shelves.
First shelf 300 A.F.F., Second 900 A.F.F. Third shelf 1375mm
A.F.F. & Fourth shelf at 1850mm A.F.F.
Shelf outer tube 32mm dia S.S. pipe with 25mm dia S.S pipe
welded to outer tube at 75 c/c.
Four (4) no. 38mm dia S.S. pipe upright on castor.
Four (4) no. 150mm dia Non marking rubberized castors two
with brakes.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 556 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-120
PRE- RINSE SPRAY UNIT WITH FAUCET
QUANTITY: 02
SIZE
Width:
315mm
Depth:
358mm
Height:
850mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
Hot
ᴓ
Waste ᴓ
ELECTRIC :
Power
Voltage
EXHAUST
NA
GAS:
BTU
Con.
½”
½”
NA
NA
NA
SPECIFICATIONS
•
•
•
•
•
NA
ᴓ NA
ACCESSORIES:
•
•
•
•
•
Easy Install Pre-Rinse, Spring Action, 8" Wall Mount Base,
Wall Bracket, & Swivel
8" wall mount mixing faucet with polished chrome plated
brass body,
18" riser,
44" flexible stainless steel hose with heat resistant handle
and swivel,
1.42 GPM spray valve, compression cartridges with spring
checks,
lever handles,
1/2" NPT female inlets,
6" adjustable wall bracket,
spray valve holder and overhead spring.
Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9
and NSF 372. EP Act 2005 compliant
Wall mounting bracket and finger hook
SPECIAL NOTE:
T&S
B-0133-B-SWV
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 557 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-123
WORK TABLE W/SINK
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
2400mm
700 mm
865mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
ᴓ
½”
Hot
ᴓ
½”
Waste
ᴓ
2”
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
EXHAUST
NA
•
GAS:
•
•
BTU
NA
Con.
ᴓ
NA
2.0mm thick S.S. Top.
150mm High Rear & both side Splash.
Top secured to 12/25mm x 75mm x 25/12mm x 1.6 mm Thick S.S.
hat type welded channel frame work.
Left of unit One (1) no. 500mm x 500mm x 300mm deep, 2.0mm
thick S.S. sink, Sink Complete with 50mm dia lever handle
operated waste outlet & rear connected overflow.
Eight (08) no. 38mm x 38mm x 1.2 mm thick S.S. square pipe.
Legs with adjustable bullet feet.
Right side of sink provide parking space for Modular equipment
mobile garbage can.
As shown provide two (02) no. S.S. utensil drawer, complete with
handle and locking arrangement.
0.9mm thick S.S Apron front of Sink.
As shown Right side balance space below drawer provided 1.2mm
thick bottom shelf.
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 558 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-124
WALL SHELVES
QUANTITY: 02
SIZE
Width:
Depth:
Height:
2400 mm
300 mm
200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
1.2 mm thick S.S. Wall shelves.
Rear & both sides turned up 50mm & Hemmed out side, Front
turned down 38mm & in 12mm.
Shelves secured to bracket with acorn S.S. nuts & bolts.
Three (03) no. 2.0 mm thick S.S. wall Brackets. Secured to top
with acorn Nuts & Bolts & Bracket secured to wall with anchor
fasteners.
Mounting Height- 1400mm a.f.f. and 1700 a.f.f.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 559 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SK-125
WORK TABLE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
2550mm
700 mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
2.06 mm thick S.S. Top.
150mm High Rear and both sides Splash.
Top secured to 12/25mm x 75mm x 25/12mm x 1.6 mm Thick
S.S. hat type welded channel frame work.
Full width 1.2 mm thick S.S. Bottom & intermediate shelves.
Six (06) no. 38mm x 38mm x 1.6mm thick S.S. square pipe legs.
With adjustable bullet feet.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 560 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-126
WALL SHELVES
QUANTITY: 02
SIZE
Width:
Depth:
Height:
2550 mm
300 mm
200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
1.2 mm thick S.S. Wall shelves.
Rear & both sides turned up 50mm & Hemmed out side, Front
turned down 38mm & in 12mm.
Shelves secured to bracket with acorn S.S. nuts & bolts.
Three (03) no. 2.0 mm thick S.S. wall Brackets. Secured to top
with acorn Nuts & Bolts & Bracket secured to wall with anchor
fasteners.
Mounting Height- 1400mm a.f.f. and 1700 a.f.f.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 561 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SK-127
HAND WASH SINK UNIT
QUANTITY: 01
SIZE
Width:
Depth:
384 mm
353 mm
CAPACITY
6 l/ min
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Wast
e
∅
1½”
ELECTRIC :
Power
NA
Voltage
NA
Height:
512 mm
SPECIFICATIONS
• Wall mounted knee-activated hand wash sink.
• S.S. construction.
• 240mm High Splash.
• Knee operated water faucet.
• Round pressed bowl.
• Depth of Wash Bowl: 150mm.
• With hot and cold water mixer.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
∅
ACCESSORIES:
•
Soap dispenser, Paper dispenser, S.S. Garbage
Bin
SPECIAL NOTE:
SOFINOR
LMASBD
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 562 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-129
WORK TABLE WITH SINK & UNDER SPACE
FOR UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
4800 mm
700 mm
865mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Waste
∅
2”
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
•
•
EXHAUST
NA
GAS:
•
BTU
NA
Con.
∅
NA
•
2.0mm thick S.S. Top.
150mm High rear & both side splash.
Top secured to 12/25mm x 75mm x 25/12mm x 2.0 mm Thick S.S.
hat type welded channel frame work.
Twelve (12) no. 38mm x 38mm x 1.2 mm thick S.S. square pipe.
legs. With adjustable bullet feet.
Left side of unit provide One (1) no. 450mm x 450mm x 200mm
deep x 2.0mm thick S.S. sink, Sink Complete with 50mm dia lever
handle operated waste outlet & rear connected overflow.
0.9mm thick S.S Apron front of Sink.
Right side of sink provide space for mobile equipment garbage can
As shown balance right side 1.2mm thick part bottom and middle
shelf.
Right side of unit provided space for modular under counter
refrigerator.
As shown provide One (01) no. S.S. utensil drawer, complete with
handle and locking arrangement.
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 563 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-130
WALL SHELVES
QUANTITY: 02
SIZE
Width:
Depth:
Height:
4800 mm
300 mm
200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
1.2 mm thick S.S. Wall shelves.
Rear & both sides turned up 50mm & Hemmed out side, Front
turned down 38mm & in 12mm.
Shelves secured to bracket with acorn S.S. nuts & bolts.
Three (03) no. 2.0 mm thick S.S. wall Brackets. Secured to top
with acorn Nuts & Bolts & Bracket secured to wall with anchor
fasteners.
Mounting Height- 1400mm a.f.f. and 1700 a.f.f.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 564 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-133
UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
1415 mm
660 mm
800 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.35 KW
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
• Equipment mounted below S.S. top counter.
• 0.9mm thick S.S. top.
• Without splash.
• SS 304 interior and exterior.
• With 100mm high adjustable legs.
• Four (4) SS removable & Adjustable shelves.
• Two (02) no 304 S.S Doors with insulation.
• Ambient temperature 43 deg C.
• Internal Temp 0 Deg C to 4 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A.
• Housing on left side. Complete with Open able Drawer type
sliding Access.
• Digital read out thermometer, cord with time delay auto start.
• Forced draft cooling.
• Door activated light on – off.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating.(for condensate water evaporation)
ACCESSORIES:
SPECIAL NOTE:
FOSTER
WILLIAMS
IGLU
PRO 1/2 H
HO2U-XDD
equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 565 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-135
MULTIPURPOSE JUICER (3 IN 1)
QUANTITY: 01
SIZE
Width:
Depth:
Height:
317 mm
490 mm
510 mm
CAPACITY
20 liter / hour
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
1.0 KW
Voltage
220v.50c.1p
•
With asynchronous Single phase, heavy duty and quiet
motor
Aluminum casting and stainless steel construction
Stainless steel bowl and filter grid rubber bowl
sustainer
Multipurpose combi machine: drink mixer Sirio, juicer
Apollo, blender Dragone.
Separate motors for each function.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
With power cord and plug, Accessories for Installation and operation.
SPECIAL NOTE:
SIRMAN
MULTIPLO 3S/L
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 566 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-136
UPRIGHT TWO DOOR REFR
QUANTITY: 01
SIZE
Width:
Depth:
Height:
700 mm
850 mm
2075 mm
CAPACITY
600 Liter (Temp. +10 C to +40
C)
M.E.P REQUIRMENT
PLUMBING :
Cold
NA
Hot
NA
Waste
NA
ELECTRIC :
Power
0.38 K.W
Voltage
220v-50c-1p
EXHAUST
NA
GAS:
BTU
NA
Con.
NA
ACCESSORIES:
SPECIFICATIONS
• AISI 304 SS exterior and interior
• Full AISI 304 SS back
• Two half door
• With R-134A refrigerant
• Heavy duty castors with breaks
• Right hinged door
• Ambient temperature of operation – 45 deg C
• Hot gas defrost
• Fuzzy logic controllers
• Double dipped coils
• 60 mm high density insulation.
• Heavy duty magnetic gasket.
• Solid state fan cut out switch
• Rifled copper tubing
• Corrugated evaporator fins
• removable plug box and lid for easy service access
• LED temperature display
• Safety Alarm
• Removable shelves
• Three shelves of size 530 X 650
• Door opening suitable to GN. 2/1 pan entry.
• Drip tray with heating
additional nylon coated shelf
SPECIAL NOTE:
FOSTER
WILLIAMS
IGLU
F 600 H
equivalent
equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 567 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-137
WORK TABLE WITH SINK & UNDER SPACE
FOR UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
5550 mm
750 mm
865mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Waste
∅
2”
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
•
EXHAUST
NA
•
GAS:
BTU
NA
Con.
∅
•
NA
2.0mm thick S.S. Top.
150mm High rear & both splash.
Top secured to 12/25mm x 75mm x 25/12mm x 2.0 mm Thick S.S.
hat type welded channel frame work.
Twelve (12) no. 38mm x 38mm x 1.2 mm thick S.S. square pipe.
legs. With adjustable bullet feet.
Left side of unit provide One (1) no. 450mm x 450mm x 200mm
deep x 2.0mm thick S.S. sink, Sink Complete with 50mm dia lever
handle operated waste outlet & rear connected overflow.
0.9mm thick S.S Apron front of Sink.
25mm x 25mm x 1.6mm thick S.S. square pipe cross bracing
welded to legs at as shown.
Right side of sink provide parking space for mobile garbage can
and balance section provide 1.2mm thick bottom and middle shelf.
Right side of unit provided space for modular under counter
refrigerator.
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 568 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-138
WALL SHELVES
QUANTITY: 02
SIZE
Width:
Depth:
Height:
5550 mm
300 mm
200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
1.2 mm thick S.S. Wall shelves.
Rear & both sides turned up 50mm & Hemmed out side, Front
turned down 38mm & in 12mm.
Shelves secured to bracket with acorn S.S. nuts & bolts.
Three (03) no. 2.0 mm thick S.S. wall Brackets. Secured to top
with acorn Nuts & Bolts & Bracket secured to wall with anchor
fasteners.
Mounting Height- 1400mm a.f.f. and 1700 a.f.f.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 569 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-139
GARBAGE CAN
QUANTITY: 02
SIZE
Width:
502 mm
Dia:
410 mm
CAPACITY
70 liters
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Height:
673 mm
SPECIFICATIONS
• Polyethylene Construction.
• With rust, dent, chip or peel free.
• Heavy duty Pedal Mechanism.
• Tight fitting overlapping lid.
• With Round Corner.
• 70 Liter Container Equipped with 2 full plastic Rear Wheels for
better maneuverability.
• Unit should be suitable for work in Food service area.
• Color and qty As Per operator.
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Color and qty As Per operator.
PROBBAX
S0-1271
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 570 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-142
SLOT TOASTER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
455 mm
220 mm
210 mm
CAPACITY
6 slots
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
2.6 KW
Voltage
220v-50c-1p
SPECIFICATIONS
• Electrical operated.
• Neon indicator lamp.
• Mix and match selector switch.
• Round edges corner.
• Timer with audible alarm.
• Option for Single sided toasting.
• With crump tray.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
LINCAT
ROWLETT RUTLAND.
LT6X
6-AT-171E
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 571 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-143
UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
1865 mm
700 mm
800 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.45 KW
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
• Equipment mounted below S.S. top counter.
• 1.6mm thick S.S. top.
• Without splash
• SS 304 interior and exterior.
• Six (06) no. drawer with handle.
• Ambient temperature 43 deg C.
• Internal Temp 0 Deg C to 4 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A.
• Housing on Left side. Complete with Open able Drawer type
sliding Access.
• Digital read out thermometer, cord with time delay auto start.
• Forced draft cooling.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating.(for condensate water evaporation)
• With four (04) nos. high adjustable legs.
ACCESSORIES:
SPECIAL NOTE:
FOSTER
WILLIAMS
IGLU
PRO 1/3 H DRAWER
HO3U-XNNN
equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 572 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-144
SALADETTE UNIT
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
980 mm
375 mm
241 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.25 H.P.
Voltage
220v.50c.1p.
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
• Table top
• 304 S/S interior and exterior
• 304 S/S at back
• S.S. 304 steel at base
• With hinged lid
• Accommodates Eight (08) 1/61 GN Pans
• Fitted with thermometer
• Adjustable thermostat
• Designed for 43°C Ambient Temperature
• Internal Temp +1 Deg C to +4 Deg C
• Copper tube cooling
• REFRIGERANT GAS: R-134 A
• Condensing unit aside
• Rounded edge for internal chamber
• Manual defrost
• Fitted with thermometer
ACCESSORIES:
SPECIAL NOTE:
WILLIAMS
IGLU
TW 9
equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 573 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SK-145
SANDWICH GRILLER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
335 mm
385 mm
220 mm
CAPACITY
Cooking area – 260 X 240 mm
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
2.0 KW
Voltage
220v-50c-1p
SPECIFICATIONS
• Electrical operated.
• Cast Iron Plate.
• With thermostat 0-300°C
• With juice tray
• With Heat resistant handles.
• On/off indicator.
• With a scraper.
• With automatic regulation of the heat of cooking.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
Electronic timer 3 minute.
SPECIAL NOTE:
ROLLER GRILL (FRANCE)
LINCAT
TOASTMASTER
SAVOYE
GG1R + SS1
A710PA
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 574 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-01
PICKUP COUNTER W/SINK
SPACE
FOR
UNDER
REFRIGERATOR
& UNDER
COUNTER
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
4600 mm
800 mm
865mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Waste
∅
2”
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
•
•
EXHAUST
NA
GAS:
•
BTU
NA
Con.
∅
2.0mm thick S.S. Top.
150mm High left side splash.
Top secured to 12/25mm x 75mm x 25/12mm x 2.0 mm Thick S.S.
hat type welded channel frame work.
Ten (10) no. 38mm x 38mm x 1.2 mm thick S.S. square pipe legs,
with adjustable bullet feet.
Left side of unit provide One (1) no. 500mm x 500mm x 200mm
deep x 2.0mm thick S.S. sink, Sink Complete with 50mm dia lever
handle operated waste outlet & rear connected overflow.
0.9mm thick S.S Apron all sides of Sink.
Right side of sink provide parking space for garbage can .
As shown provide mounting space for Modular equipment
UNDER COUNTER REFRIGERATOR as shown.
Balance right space for provide 1.2 mm thick S.S. Bottom &
intermediate shelves.
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 575 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-02
UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
1815 mm
760mm
800 mm
CAPACITY
AS PER GN. 2/1 PAN
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.45 KW
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
• Equipment mounted below S.S. top counter.
• 0.9mm thick S.S. top.
• Without splash.
• SS 304 interior and exterior.
• With 100mm high adjustable legs.
• Four (04) SS removable & Adjustable shelves.
• Two (02) no 304 S.S Doors with insulation.
• Ambient temperature 43 deg C.
• Internal Temp 0 Deg C to 4 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A.
• Housing on Left side. Complete with Open able Drawer type
sliding Access.
• Digital read out thermometer, cord with time delay auto start.
• Forced draft cooling.
• Door activated light on – off.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating.(for condensate water evaporation)
ACCESSORIES:
SPECIAL NOTE:
WILLIAMS
IGLU
ME2U-XDD
equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 576 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-03
GARBAGE CAN
QUANTITY: 02
SIZE
Width:
502 mm
Dia:
410 mm
CAPACITY
70 liters
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Height:
673 mm
SPECIFICATIONS
• Polyethylene Construction.
• With rust, dent, chip or peel free.
• Heavy duty Pedal Mechanism.
• Tight fitting overlapping lid.
• With Round Corner.
• 70 Liter Container Equipped with 2 full plastic Rear Wheels for
better maneuverability.
• Unit should be suitable for work in Food service area.
• Color and qty As Per operator.
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Color and qty As Per operator.
PROBBAX
S0-1271
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 577 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-04
CEILING HUNG 2 TIER SHELVES
QUANTITY: 01
SIZE
Width:
Depth:
Height:
4600mm
300 mm
300mm
+1000mm
rod
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
1.2mm thick S.S. shelves.
Lower shelf all sides turned down 40mm & in 12mm, bottom of
shelves to be closed.
Upper shelf front & both sides turned down 40mm & in 12mm,
Rear turned up 50mm & hemmed, bottom of shelves to be closed.
S.S. hanger rod size as per ceiling height.
25mm x 25mm S.S. pipe hanging support.
Mounting Height-1400mm A.F.F.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 578 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-05
SPREADER TABLE
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
600mm
900mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
•
•
•
EXHAUST
2.0mm thick S.S. Top.
150 mm high rear & right splash
Top and body secured to 12/25mm x 75mm x 25/12mm x 1.6 mm
Thick S.S. hat type welded channel frame work.
Four (4) no., 38mm x 38mm x 1.6mm thick S.S. square pipe legs
with S.S. adjustable bullet feet.
One (01) no. Sliding Drawer with Six (6) no 1/6 G.N pan.
1.2mm thick S.S. bottom shelf.
0.9mm thick S.S. cladding.
Front profile/ rear splash height and profile to be match
adjoining cooking battery.
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 579 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-06
S.S CLADDED MOBILE TANDOOR
QUANTITY: 02
SIZE
Width:
Depth:
Height:
900 mm
900 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
2.0mm thick S.S. Top.
150mm high rear Splash.
Commercial grade heavy duty tandoor approx 700mm dia x 700mm
height with 300mm dia mouth.
• Top and body secured to 12/25mm x 75mm x 25/12mm # 1.6 mm
Thick S.S. hat type welded channel frame work..
• Exterior # 18 Ga. S.S. cladding.
• Interior # 18 Ga. M.S. cladding.
• 40mm thick Mineral wool insulation.
• Front S.S. Ash removable opening with shutter.
• Four(4) no. heavy duty 125mm Dia Non marking rubberized
castors all with brakes.
• Front profile/ rear splash height and profile to be match
adjoining cooking battery.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
mm
ACCESSORIES:
Steel cover, Skewers, Jodi, Cushion.
SPECIAL NOTE:
All Sheet /Pipe S.S. 304 Grade Pre-polished Plastic Coated.
MUNNILAL
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 580 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-07
SPREADER TABLE
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
600mm
900mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
•
•
•
EXHAUST
2.0mm thick S.S. Top.
150 mm high rear splash
Top and body secured to 12/25mm x 75mm x 25/12mm x 1.6 mm
Thick S.S. hat type welded channel frame work.
Four (4) no., 38mm x 38mm x 1.6mm thick S.S. square pipe legs
with S.S. adjustable bullet feet.
One (01) no. Sliding Drawer with Six (6) no 1/6 G.N pan.
1.2mm thick S.S. bottom shelf.
0.9mm thick S.S. cladding.
Front profile/ rear splash height and profile to be match
adjoining cooking battery.
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 581 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-08
SPREADER TABLE
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
400mm
900mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
•
•
•
EXHAUST
2.0mm thick S.S. Top.
150 mm high rear splash
Top and body secured to 12/25mm x 75mm x 25/12mm x 1.6 mm
Thick S.S. hat type welded channel frame work.
Four (4) no., 38mm x 38mm x 1.6mm thick S.S. square pipe legs
with S.S. adjustable bullet feet.
One (01) no. Sliding Drawer with Six (6) no 1/6 G.N pan.
1.2mm thick S.S. bottom shelf.
0.9mm thick S.S. cladding.
Front profile/ rear splash height and profile to be match
adjoining cooking battery.
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 582 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-09
GRIDDLE PLATE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1200 mm
900 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
80000
Con.
∅
¾”
SPECIFICATIONS
• Equipment to Operate on LPG Gas.
• Freestanding griddle plate (3/4 smooth and 1/3 ribbed)
• 150 mm high Rear splash.
• Cooking Surface of 1100 W X 700 D x 20mm thick M.S. plate.
• Splash Back in Stainless steel grids on three sides.
• Inner and outer Body AISI 306 Stainless steel
• 1.2mm thick S.S. bottom shelf.
• 0.9mm thick S.S. cladding.
• S.S. Legs with S.S. adjustable feet.
• Lateral drain channel for cleaning.
• Piezo ignition.
• Flame failure device.
• Fat collecting container.
ACCESSORIES:
Scrapper with brush; Splash guard
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing
with plan, elevation and section to be submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 583 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-13
DEEP FAT FRYER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
800 mm
850 mm
900mm
CAPACITY
2 X 12.5 Liter
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.2 K.W.
Voltage
220v-50c-1p
EXHAUST
NA
SPECIFICATIONS
• Gas operated equipment.
• AISI 306 Constructions.
• Rear splash.
• Unit with 2 number of frying well tanks with capacity of 25.0
liters for well.
• Two No (2) Baskets.
• 2 Lids.
• 2 oil clarifying trays.
• Unit provided with deep cold zone to collect food debris.
• Under Storage cupboard with Front hinged doors.
• S.S. Legs with S.S. adjustable feet
• Piezo ignition.
• Flame failure device.
GAS:
BTU
146845
Con.
∅
3/4
"
ACCESSORIES:
Oil Filter for fryer; Oil receptacle
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 584 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-14
SPREADER TABLE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
400 mm
850 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• Free Standing.
• S.S. Construction AISI 306.
• Under storage cupboard.
• Rear splash.
• S.S. Legs with S.S. adjustable feet.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 585 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-15
FOUR BURNER RANGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
800 mm
850 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
Equipment to Operate on gas.
Four (4) Burners open top range.
Rear splash.
Piezo ignition.
Flame failure device.
In build pressure Control regulator.
2 CNS Sliding grid.
Below under storage cupboard with handle
S.S. Legs with S.S. adjustable feet.
EXHAUST
NA
GAS:
BTU
98000
Con.
∅
¾”
ACCESSORIES:
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 586 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-16
TWO BURNER RANGE
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
1200mm
850mm
610mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
SPECIFICATIONS
• 2.0 mm thick S.S. Top.
• 290m High Rear Splash.
• Top and body secured to 12/25mm x 75mm x 25/12mm # 1.6 mm
Thick S.S. hat type welded channel frame work. .
• Exterior # 1.2 mm thick S.S. cladding.
• 25 mm Full under shelf.
• Two (2) no. 400mm x 400mm Cast iron grates (Removable).
• Two (2) no. H.P. burner with pilot lamp.
• Two (2) no. 1.2 mm thick S.S. drip tray with Integral handle.
• Built in pressure Controller regulator.
• 38mm x 38mm S.S. square pipe legs. With adjustable bullet feet.
NA
GAS:
BTU
14,0000
Con.
∅
¾”
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 587 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-17
GAS FIRED TILTING KETTLE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1165 mm
925 mm
1000 mm
CAPACITY
150 Ltrs.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.25 KW
Voltage
220v-50c-1p
EXHAUST
NA
GAS:
BTU
140,000
Con.
∅
SPECIFICATIONS
• Gas operated.
• Auto motorized tilting mechanism.
• Internal frame and external panels are in AISI 304 stainless steel.
• AISI 316L stainless steel cooking vessel and double jacket.
• Safety thermostat.
• Thermal insulation around the kettle
• Low water cut off with indicator light.
• Water Sight Glass.
• Pressure relief valve.
• 100 % Safety gas shut off valve.
• On/OF indicator.
• With electronic ignition and monitoring.
• With temperature limiter.
• With Power Tilting.
• Tilting self locking for positive stop.
• With Temperature sensor.
1”
ACCESSORIES:
Spring assist cover HSC; Double pantry faucet; Graduated measuring strip;
Perforated strainer.
SPECIAL NOTE:
CLEVELAND
MARCKET FORGE
KGL-40-T
Equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 588 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-18
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1200mm
700mm
150 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 150 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 589 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-19
EXHAUST HOOD WITH UV GREASE
REMOVAL COMPLETE WITH DEMAND
CONTROL VENTILATION & FIRE
SUPRESSION SYSTEM
QUANTITY: 01
SIZE
Width
Depth
Height:
4900mm
3000mm
555mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅ NA
Wast
e
∅ NA
SPECIFICATIONS
•
•
ELECTRIC :
Power
0.5 K.W (for
light)
Voltage
220v-50c-1p
EXHAUST
•
8,250 CFM
GAS:
BTU
NA
Con.
∅
KIT. EQPT. SPECS
INDIA
UAE
•
•
•
The kitchen canopy shall be constructed from 1.0 mm
AISI 304 stainless steel and shall be supplied complete
with grease filters (UL listed), pressure measurement
taps, exhaust adjustment systems. The canopy shall
be HACCP certified.
The system to include lightweight stainless steel UV
lamps cassettes, directly integrated in the exhaust
plenum, behind the double stage mechanical filtration.
Cassettes should be easily removable by disconnecting
the electrical connectors.
Outer casing panels to be constructed from AISI 304
stainless steel in a brushed satin finish, in a modular
Construction. The joints of the lower edge shall be
fully welded to be liquid-tight, avoiding harmful
dripping of condensation. All exposed welds should be
ground and polished to the metal’s original finish.
The bottom edge of the exhaust plenum should be
aerodynamically designed (no flat surface).
Canopy ends shall be of double-sidewall construction.
Exhaust
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 590 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
•
•
•
•
•
•
KIT. EQPT. SPECS
INDIA
UAE
The exhaust air flow will be based on the convective
heat generated by the appliances under each canopy.
Submittal shall include convective heat calculations
based on the input power of the appliances served.
Grease filters
The canopy shall be equipped with a stainless steel
grease filter. The grease removal efficiency should be
95% for particles a diameter of 10 microns or larger.
The filter shall be NSF and UL classified. Baffle or slot
type grease filters shall not be used.
Exhaust Balancing dampers
Every spigot connections for extracted air shall be
supplied with an automated motorized balancing
damper. The damper shall automatically adjust
exhaust airflow based on direct pressure readings
from integral T.A.B test and balance port in the hood.
The Model ABD will have night time setback feature
which will automatically close the damper when the
exhaust system is shut down to prevent outside air
from migrating into the space. The Model ABD should
fail safe open on power interruption.
The damper outer casing shall be constructed of
continuously welded 1.2mm thick S.S.including the
balancing blades. Adjustment of the parallel dampers
(in open position) will be achieved by manually turning
the locking adjustment bracket until the desired
pressure reading is achieved.
Light Fixtures
Each canopy shall be provided with a LED light fixture
to provide approx. 500 lux at the cooking appliances
work surface. The light is protected with a stainless
steel hatch with plain milled finish, surrounded by a
tempered-glass light diffuser (the heat tolerance of the
glass shall be -40 to 300 °C).
Demand Control Ventilation
The system to come equipped with hood mounted
infrared cooking activity sensors capable of measuring
appliance surface temperatures. Infrared sensor will
read appliance surface temperature which will be
translated by the specific calculation algorithm for that
appliance and will respond proactively to any change
in cooking status. Infrared sensor and exhaust collar
mounted temperature sensor work in concert on
differential temperature reading back to the controller.
The system shall automatically control the speed of
the exhaust fan (and supply fan if applicable) based
on appliances status, cooking activities and exhaust air
temperatures. The system can be controlled with
either manual On/Off switch, a 24hrs automated
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 591 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
schedule with a manual override function, or the
hoods can be automatically regulated based on the
appliance status. The integrated PLC will analyze
signals from the cooking activity sensors, temperature
sensors and pressure transducers mounted in the
hood and then send a signal to the VFD(to be
provided by HVAC contractor) to adjust the exhaust
fan (and supply fan if applicable) speed to satisfy
current cooking load conditions, as well adjust the
automated balancing dampers accordingly. The
system can be monitored and controlled with an
internet connected PC from either a local or remote
location.
Fire Suppression system
Provide an automatic, water-assisted, wet chemical,
fire suppression System with provision of manual pull
station to be located in a path of egress at a maximum
height of 60 inches above the floor.Unit to be provided
with nozzles for equipment protection, plenum
protection and duct protection.Should provide 100%
protection as required by codes, standards, national,
state, and local requirements.Provide fusible links in
each exhaust duct cut-out and at a maximum gap of 2
feet (610mm) between them.Unit to be provided with
water inlet which would be connected to the fire pipe
line.Stainless steel pipe drops to be provided to the
discharge nozzles and plenum both. Discharge nozzles
should not exceed 610mm from each other.The
system, including all of its components, shall be UL
Standard 300/ ULC Standard ORD-C1254.6 Listed.
Automatic actuation shall be initiated by separation of
fusible links. Fusible link break temperature should be
as per the equipment below the same.
Distance of cylinder assembly & pull down points as
per lay out plan.
Unit should be complete of Gas shut off valve,
Disconnect system for Electrical equipment, Hood light
(incase of same is in a non fire rated enclosure,
Disconnect hvac system.
ACCESSORIES:
Standard accessories for installation, operations and
maintenance to be provided.
SAFETY NORMS:
UV access door closing and filters presence shall be
permanently controlled with maintenance free magnetic
proximity switches (automatic and immediate UV lamps
switch off).
• Each UV canopy section is equipped with a plug and play UV
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 592 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
module, integrated behind the light casing, ease of access
using the light hatch. Each UV module shall communicate with
a UV control panel, integrated in one of the canopy section.
The control panel displays warnings or
potential working defaults and shall be able to identify on
which canopy section where they occur and, if needed, which
ballast or lamps are concerned.
SPECIAL NOTE:
•
•
•
Fire suppression system should be installed by a certified vendor
and all testing and commissioning certificated needs to be
provided.
Minimum of five (05) years maintenance contract should be there
between the client and the fire suppression system vendor for
periodic maintenance inclusive cylinder and accessories as per fire
norms.
Detail provided in this specification in terms of number of Nozzles,
ducts cut outs , distance of unit etc. needs to be coordinated and
verified by Vendor. Any Deviation from above mention and
specification to be brought to the notice else it is expected that the
vendor in following complete specification as mentioned above.
HVAC Cutouts and fresh air cutouts to be coordinated with HVAC consultant. Shop drawing
with plan, elevation and section to be submitted for approval.
HALTON+ANSUL
UVI+
MARVEL+(P10+P10+P13)
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 593 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-20
UPRIGHT FOUR DOOR REFER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1440 mm
700 mm
1900 mm
CAPACITY
1350 Liter
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.45 K.W
Voltage
220v.50c.1p
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIFICATIONS
• AISI 304 SS exterior and interior.
• Full AISI 304 SS back.
• Full S.S door.
• With hydrocarbon refrigerant.
• Heavy duty castors with breaks.
• Internal tem 0 to + 4 Deg Celsius.
• One piece door.
• Ambient temperature of operation 43 deg C
• Hot gases defrost.
• Fuzzy logic controllers.
• Double dipped coils.
• 60 mm high density insulation.
• Heavy duty magnetic gasket.
• Solid state fan cut out switch.
• Rifled copper tubing.
• Corrugated evaporator fins.
• Removable plug box and lid for easy service access.
• LED temperature display and Safety Alarm.
• Removable shelves.
• Six shelves of size 530 X 650.
• Drip tray with heating.
Additional nylon coated shelf.
SPECIAL NOTE:
FOSTER
WILLIAMS
IGLU
EPRO 1350H
HG2T
equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 594 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-21
SERVICE CONSOLE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
4600mm
200 mm.
1050mm+Up
false ceiling
to
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
SPECIFICATIONS
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
Power
NA
•
•
Voltage
NA
ELECTRIC :
S.S 304 1.2 mm thick Construction.
Removable Panel.
Suitable to be mounted above floor.
Pre-piped for Water, Drainage, Electrical Services required as per
cooking battery.
Three section for water, Electrical and gas services
Removable panels
Gas:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with plan,
elevation and section to be submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 595 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-22
WORK TABLE W/SINK
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
3200mm
700 mm
865mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Waste
∅
2”
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
EXHAUST
•
•
NA
GAS:
BTU
NA
Con.
∅
2.0 mm thick S.S. Top.
150mm High Rear& right Splash.
Top secured to 12/25mm x 75mm x 25/12mm x 1.6 mm Thick S.S.
hat type welded channel frame work.
Left side of unit One (1) no. 450mm x 450mm x200mm deep,
2.0mm thick S.S. sink, Sink Complete with 50mm dia lever handle
operated waste outlet & rear connected overflow.
Eight (08) no. 38mm x 38mm x 1.2 mm thick S.S. square pipe
Legs. With adjustable bullet feet.
25mm x 25mm x 1.6mm thick S.S. square pipe cross bracing
welded to legs at Rear & both sides. Front open.
0.9mm thick S.S Apron front of Sink.
Right side of sink provide parking space for modular equipment
garbage can & balance right side provide part 1.2mm thick S.S.
bottom and middle shelves.
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 596 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-23
STORE ROOM SHELVING- DAY STORE
QUANTITY: 04
SIZE
WIDTH:
DEPTH:
HEIGHT:
914MM-02
535 MM
2000 MM
1060MM-02
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
cold
∅
NA
hot
∅
NA
waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
GAS:
BTU
NA
CON.
∅
SPECIFICATIONS
• Corrosion Proof Polymer Mats With Natural Finish
• Total five (05) no. shelves..
• Polymer Mat With Exclusive Built In Antimicrobial Product
Protection
• S.S Uprights.
• Edge Reinforced Nylon.
• With Corner Hooks
• Hanging Rails
• Shelf Support.
• Maximum Load 600 Kg Per Field.
• Adjustable Shelves
• With Adjustable S.S Feet.
• Shelving To Be Installed As Continuous Length With Common
Uprights With Maximum Distance Of 1050 Mm.
ACCESSORIES:
SPECIAL NOTE:
Space saving common use of uprights between 2 shelving units
possible, depending upon site / space conditions. The sizes and
number can verify as per the final plan of the store.
CAMBRO
HUPFER
METRO
CAMSHELVING
NORM 12
METROMAXQ
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 597 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-31
SLOT CHANNEL / DRAIN RAIL
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1450mm
250mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
Channels:
Material: 2mm. thick Stainless Steel Grade: 304 Pickle
Passivated. Levelling bolts to adjust height. Inclusive of foul air trap, silt
basket, drainage ring (O-ring)
Gully: Corrosion protected deep-drawn gully body stainless steel grade
304. Pickle Passivated. Gully body outer diameter is 178mm, with vertical
outlet size 110 mm diameters.
NA
Grating for Gully top: Anti-slip electro-polished stainless steel
grating,with load bar size 30mm X 2mm.Load Class L,
according to EN1253.
Gratings are made by arc-welding (not spot welding)
Side bottom Inlets :50mm Socketed Side inlet made of Pickle Passivated
Stainless Steel & EPDM seal for taking indirect waste from surrounding
kitchen equipment if any
Function
To drain heavy waste water via in-direct drainage from food service
equipment and kitchen floor.
Modular structure for gratings with smaller individual grating to fit the
size of the channel to avoid work injury from being too heavy to bulky to
handle
Slab Penetration: Requires 110mm dia waste drain connection. Requires floor cut-out and recess. Refer to
WPR drawings. Location/number of drain pipes from food service equipments to be
coordinated with MEP Consultant.
SAFETY NORMS:
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 598 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SC-32
REFER SHELVING
QUANTITY: 06
SIZE
WIDTH:
DEPTH:
HEIGHT:
914MM-01
535 MM
1830 MM
1060MM-05
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
cold
∅
NA
hot
∅
NA
waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
GAS:
BTU
NA
CON.
∅
SPECIFICATIONS
• Corrosion Proof Polymer Mats With Natural Finish
• Total five (05) no. shelves..
• Polymer Mat With Exclusive Built In Antimicrobial Product
Protection
• S.S Uprights.
• Edge Reinforced Nylon.
• With Corner Hooks
• Hanging Rails
• Shelf Support.
• Maximum Load 600 Kg Per Field.
• Adjustable Shelves
• With Adjustable S.S Feet.
• Shelving To Be Installed As Continuous Length With Common
Uprights With Maximum Distance Of 1050 Mm.
ACCESSORIES:
SPECIAL NOTE:
Space saving common use of uprights between 2 shelving units
possible, depending upon site / space conditions. The sizes and
number can verify as per the final plan of the store.
CAMBRO
HUPFER
METRO
CAMSHELVING
NORM 12
METROMAXQ
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 599 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-36
POT WASH THREE SINK UNIT
QUANTITY: 01
SIZE
Width:
Depth:
Height:
2700mm
750 mm
750mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
(2)½”
Hot
∅
(2)½”
Waste
∅
(3)2”
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
EXHAUST
•
NA
GAS:
•
BTU
NA
Con.
∅
2.0 mm Thick S.S. Top.
250mm High Rear & both sides Splash. Front turned up 25mm,
returned 40mm, down 75mm & in 12mm.
Top secured to 12/25mm x 75mm x 25/12mm x 1.6 mm Thick
S.S. hat type welded channel frame work.
Center of top provided three (03) nos. 600mm x 600mm x
350mm deep, 2.0mm thick. S.S. sinks, Sink Complete with
50mm dia lever handle operated waste outlet & rear connected
overflow.
Six (06) no. 38mmx 38mm x 1.6mm thick. S.S. square pipe legs.
With adjustable bullet feet.
25mm x 25mm x 1.6mm thick S.S. pipe cross bracing welded to
legs at Rear & both sides.
0.9mm thick S.S Apron front of Sink.
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 600 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-37
WALL MOUNTED POT RACK
QUANTITY: 02
SIZE
Width:
Depth:
Height:
1100mm
375 mm
245 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
Four (4) no. 25mm x 25mm X 16 ga. S. S. square pipe welded
construction.
75mm high splash/railing at rear & both sides.
S.S. pipe shelf welded to S.S. brackets.
Three (3) no. 2.0 mm thick S.S. wall Brackets. Secured to top
with acorn Nuts & Bolts & Bracket secured to wall with anchor
fasteners.
Mounting Height- 1500mm A.F.F.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 601 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-38
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1200mm
600mm
150 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 602 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-39
MOBILE POT RACK
QUANTITY: 02
SIZE
Width:
Depth:
Height:
1250mm
600 mm
1900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
Four (4) no. S.S. pipe shelves.
First shelf 300 A.F.F., Second 900 A.F.F. Third shelf 1375mm
A.F.F. & Fourth shelf at 1850mm A.F.F.
Shelf outer tube 32mm dia S.S. pipe with 25mm dia S.S pipe
welded to outer tube at 75 c/c.
Four (4) no. 38mm dia S.S. pipe upright on castor.
Four (4) no. 150mm dia Non marking rubberized castors two
with brakes.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 603 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-40
PRE- RINSE SPRAY UNIT WITH FAUCET
QUANTITY: 02
SIZE
Width:
315mm
Depth:
358mm
Height:
850mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
Hot
ᴓ
Waste ᴓ
ELECTRIC :
Power
Voltage
EXHAUST
NA
GAS:
BTU
Con.
½”
½”
NA
NA
NA
SPECIFICATIONS
•
•
•
•
•
NA
ᴓ NA
ACCESSORIES:
•
•
•
•
•
Easy Install Pre-Rinse, Spring Action, 8" Wall Mount Base,
Wall Bracket, & Swivel
8" wall mount mixing faucet with polished chrome plated
brass body,
18" riser,
44" flexible stainless steel hose with heat resistant handle
and swivel,
1.42 GPM spray valve, compression cartridges with spring
checks,
lever handles,
1/2" NPT female inlets,
6" adjustable wall bracket,
spray valve holder and overhead spring.
Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9
and NSF 372. EP Act 2005 compliant
Wall mounting bracket and finger hook
SPECIAL NOTE:
T&S
B-0133-B-SWV
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 604 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-43
CUTLERY & PLATE HOLDER
QUANTITY: 04
SIZE
Width:
Depth:
Height:
910mm
638mm
990mm
CAPACITY
For 200 plates
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
Ø 25mm curved 18.10 stainless steel frame
4 Ø 125mm swivel wheels, polyamide coated, 2 with brakes,
with rubber bumpers
2 removable stainless steel wire separators used a grid to stop
items dropping off the trolley
ELECTRIC :
Power
Voltage
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
mm
ACCESSORIES:
SPECIAL NOTE:
HUPFER
SOFINOR
Equivalent
CPA200H + CPASBAC
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 605 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-45
CONVEYOR TOASTER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
410 mm
668 mm
398 mm
CAPACITY
340 Slices Per Hrs
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
2.8 K.W
Voltage
220v-50c-1p
•
•
Full SS construction.
Controlled top and bottom heating.
Capacity 14 slices per min.
Include slide out crumb tray.
Unit suitable to uniformly toast breads, buns, bagels and muffins
continuously.
Discharge in front.
Insulation and internal fan0 for cool surface.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
mm
ACCESSORIES:
Power cord with plug, One set of extra heating elements, As accessories
provide SS exit tray and horizontal loading rack
SPECIAL NOTE:
Outer finish to be coordinated with ID
.
HATCO
LINCAT
TQ-800H
CT1
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 606 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-46
JUICE DISPENSER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
410 mm
430 mm
680mm.
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.5 H.P.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
•
•
•
•
•
•
•
S.S base
Non toxic poly carbonates cover with containers with capacity
of 10 liters.
Hermetically sealed compressor.
Air cooled condenser.
Automatic thermostat.
Drink agitation system easy to remove & clean.
Low voltage back light.
NA
ACCESSORIES:
SPECIAL NOTE:
Outer finish to be confirm by operator.
JETSPRAY
CRATCHO
UGOLINI
JT-30
EQUIVLANT
EQUIVLANT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 607 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-48
TEA/COFFEE DISPENSER
QUANTITY: 02
SIZE
Width:
Depth:
237mm Dia
Height:
406 mm
5 liter
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.5 K.w.
Voltage
220v-50c-1p
EXHAUST
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
Table top equipment
Electrical opertaed
Cap- 51 cups.
Holding temp. 80 t0 85 deg.C
S.S. tap
S.S. construction
Double walled stainless steel
Integrated gauge glass
S.S. lid
Finger hook
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
ANIMO
CM5e
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 608 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-50
TRAY REST RAIL
QUANTITY: 02
SIZE
Width:
Depth:
Height:
7250 mm
300
--
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
7250 width x 300mm deep, 25mm dia x1.6 mm thick S.S. pipe
tray rest rail with S.S. bracket at front of stone top counter.
S.S. pipe shelf welded to 2.0 mm thick S.S. brackets.
Tray rest rail suitable to be mounted I.D. stone counter
ELECTRIC :
Power
Voltage
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
mm
ACCESSORIES:
SPECIAL NOTE:
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 609 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-51
DROP IN REFRIGERATED
W/SNEEZE GUARD
COLD
PAN
QUANTITY: 02
SIZE
Width:
Depth:
Height:
Approx
1600mm
(Internal)
505mm
200mm
(Internal)+c
ompressor
(Internal)
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
2”
ELECTRIC :
Power
1.0 H.P.
Voltage
220v-50c-1p.
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
Unit drop in I.D. Stone top counter.
Internal size of Pan Approx 1600mm x 505mm x 200mm,
Suitable to five (05) no. GN 1/1 Pan
25 mm extended flanges on top,
Five (05) no. GN. 1/1 Pan, 150mm deep with lid.
1.2 mm. S.S. pan, 304 S.S. construction
All four sides 1.2 mm. S.S fully welded one- Piece ,installed
Base of unit pitched to Side sloping type and provided w/38mm
dia for C.P drain.
50mm thick Puff Insulation
1.2 mm G.A S.S perforated false bottom to be provided.
1.0 H.P. compressor, at bottom
One no. 1800mm x 450 mm deep Sneeze Guard shelf towards
pick-up side. Complete clear 3/8" thick transparent acrylic sheets
cladding, sloping type, S.S. supports s secured to ID stone top
counter mounted at approx 400 above counter top.
ACCESSORIES:
Power cord
SPECIAL NOTE:
To be coordinated with ID for cut outs Shop drawing with plan,
elevation and section to be submitted for approval. Finish to be coordinate with I.D
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 610 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-52
DROP IN HOT BAIN-MARIE W/SNEEZE GUARD
QUANTITY: 02
SIZE :
Width:
Depth:
Height:
Approx
1300mm
(Internal)
530mm
(Internal)
225mm
(Internal)
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
SPECIFICATIONS
•
Cold
∅
NA
Hot
∅
½”
Waste
∅
2”
•
•
Power
3.5 K.W
•
Voltage
220v-50c-1p
ELECTRIC :
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
•
•
•
•
•
Approx. internally 1300mm x 530 mm x 225mm high (internal), 1.6 mm hot bain
marie tank & suitable to accommodate four (04) nos. full size GN. 1/1 GN,
150mm deep food pans. (GN Pan by – Kit Eqpt. Supplier).
Bottom sloped to 38 mm dia, w/ angle valve.
Provide 3.5 KW electric heating elements clamped 25mm off the bottom.
Complete w/ Thermostat, on-off switch, red light and S.S recessed controls
panel.
50 mm thick tightly packed glass wool. Sheathed w/ 0.9 mm. SS sheets on
exterior.
1.6 mm. S.S, secured to fully welded box S.S. angle framework.
Drop in unit
304 stainless steel construction
50mm thick glass wool insulation all sides.
One no. 1500mm x 450 mm deep Sneeze Guard shelf towards pick-up side.
Complete clear 3/8" thick transparent acrylic sheets cladding, sloping type, S.S.
supports s secured to ID stone top counter mounted at approx 400 above counter
top.
ACCESSORIES:
SPECIAL NOTE:
All Sheet /Pipe S.S. 304 Grade Pre-polished Plastic Coated. Shop drawing with plan,
elevation and section to be submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 611 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-56
TEA/COFFEE DISPENSER
QUANTITY: 02
SIZE
Width:
Depth:
237mm Dia
Height:
406 mm
5 liter
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.5 K.w.
Voltage
220v-50c-1p
EXHAUST
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
Table top equipment
Electrical opertaed
Cap- 51 cups.
Holding temp. 80 t0 85 deg.C
S.S. tap
S.S. construction
Double walled stainless steel
Integrated gauge glass
S.S. lid
Finger hook
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
ANIMO
CM5e
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 612 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-60
WATER COOLER
QUANTITY: 01
SIZE
Width:
650 mm
Depth:
600mm
CAPACITY
120 lt
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ ¾”
(Purified)
Hot
∅ NA
Waste
∅
1”
ELECTRIC :
Power
0.5 H.P
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
Height:
As per cap.
SPECIFICATIONS
•
•
•
•
•
•
•
•
Full S.S Construction
AISI 304 SS exterior and interior
Freestanding
SS legs.
All S.S construction and finish.
Provided with Two (2) no. of faucet.
Refrigerant gas R-22 to be used.
S S drip pan.
NA
ACCESSORIES:
SPECIAL NOTE:
Power Cord with plug
BLUE STAR
EQUIVLANT
CAP-120 LTRS.
LOCAL MARKET EQUIPMENT BYCLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 613 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-60A
WATER FILTER FOR WATER COOLER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
8.04”
5.25”
7.59”
CAPACITY
9000 GALLONS
(34069 liters)
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
SPECIFICATIONS
• NSF certified scale stick.
• Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
• Include built in water shut-off valve system.
• Built in water pressure gauge.
• Shipping Weight is 6lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
TEMPERATURE:
80°F(27°C)
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
10-125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE
QC71 SINGLE-MH2
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 614 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-61
MOBILE GLASS RACK
QUANTITY: 01
SIZE
Width:
Depth:
Height:
625 mm
600 mm
1500mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
Four 1.2 mm thick S.S. Shelves.
Front turned up 12mm @45 degree, turned down 40mm & in
12mm., Rear & both sides turned up 50mm & hemmed.
38mm x 38mm x 1.6mm thick S. S. square pipe uprights on castor.
S.S. shelves welded to S.S. square pipe uprights.
Four (4) no. Heavy duty 102 mm dia Non marking rubberized
castors two with brakes.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 615 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-62
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
550mm
350mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 616 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SC-68
HAND WASH SINK UNIT
QUANTITY: 01
SIZE
Width:
Depth:
384 mm
353 mm
CAPACITY
6 l/ min
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Wast
e
∅
1½”
ELECTRIC :
Power
NA
Voltage
NA
Height:
512 mm
SPECIFICATIONS
• Wall mounted knee-activated hand wash sink.
• S.S. construction.
• 240mm High Splash.
• Knee operated water faucet.
• Round pressed bowl.
• Depth of Wash Bowl: 150mm.
• With hot and cold water mixer.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
∅
ACCESSORIES:
•
Soap dispenser, Paper dispenser, S.S. Garbage
Bin
SPECIAL NOTE:
SOFINOR
LMASBD
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 617 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SC-69
U-SHAPED SOILED DISH DROP OFF TABLE
WITH SINK, TABLE MOUNTED RACK
SHELF& CHUTE
QUANTITY: 01
SIZE
Width:
2800mm+2475mm+1
830mm
Depth:
Height:
1050mm+750m
m
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
2”
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
•
NA
EXHAUST
NA
•
GAS:
BTU
NA
Con.
∅
•
NA
•
•
•
•
2.0 mm Thick S.S.
U- Shaped top, profile as per lay out plan.
Front and rear sides turned up 75mm, returned 40mm, turned down
50mm & in 12mm.
250mm High splash Rear & sides against wall. Location as per plan.
Top secured 25mmx 100mm x 25mm x 1.6mm mm thick. S.S.
Channel frame work.
One (01) no. 500mm x 500mm x 300mm, 2.0mm thick. S.S. pre
wash sink, Sink Complete with 50mm dia lever handle operated
waste outlet & rear connected overflow.
One (1) no. 1.6 mm thick S.S. 50mm high Removable perforated
Strainer basket with handles. Size as per suit in sink
Eighteen (18) no. 38mmx 38mm x 1.2mm thick S.S. square pipe
legs. With adjustable bullet feet. (Rear side of drop off table legs as
per site low height masonry wall/drop-off opening.
25mm x 25mm x 1.2mm thick. S.S. pipe cross bracing welded to legs
at Front & both sides.
0.9mm thick S.S Apron front of Sink & S.S. trough.
Two (02) no. 150mm dia x 100mm high garbage chute location as
per plan.
One (01) 3550mm long x 1.2mm thick table mounted rack shelf
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 618 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-70
SOAKING TROLLEY
QUANTITY: 02
SIZE
Width:
Depth:
Height:
500mm
650 mm
610mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
EXHAUST
•
NA
2.0mm thick S.S. w/all sides channel shape.
535mm X 535mm X 305mm deep 1.6mm thick S.S. with all
corners coved 20mm radius , Complete with 38mm dia lever
handle operated waste outlet with Tail pipe extended at 50mm
A.F.F.
38mm x 38mm x 1.6mm thick S.S. pipe legs on castor.
(4) no. 102 mm dia Non marking rubberized castors two with
brakes.
25mm x 25mm x 1.6mm thick S.S. pipe cross bracing at rear &
both sides.
One (1) no. 1.6 mm thick S.S. 50mm high Removable perforated
Strainer basket with handles. Size as per suit in sink
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 619 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-71
GARBAGE CAN
QUANTITY: 02
SIZE
Width:
502 mm
Dia:
410 mm
CAPACITY
70 liters
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Height:
673 mm
SPECIFICATIONS
• Polyethylene Construction.
• With rust, dent, chip or peel free.
• Heavy duty Pedal Mechanism.
• Tight fitting overlapping lid.
• With Round Corner.
• 70 Liter Container Equipped with 2 full plastic Rear Wheels for
better maneuverability.
• Unit should be suitable for work in Food service area.
• Color and qty As Per operator.
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Color and qty As Per operator.
PROBBAX
S0-1271
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 620 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-72
PRE- RINSE SPRAY UNIT WITH FAUCET
QUANTITY: 01
SIZE
Width:
315mm
Depth:
358mm
Height:
850mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
Hot
ᴓ
Waste ᴓ
ELECTRIC :
Power
Voltage
EXHAUST
NA
GAS:
BTU
Con.
½”
½”
NA
NA
NA
SPECIFICATIONS
•
•
•
•
•
NA
ᴓ NA
ACCESSORIES:
•
•
•
•
•
Easy Install Pre-Rinse, Spring Action, 8" Wall Mount Base,
Wall Bracket, & Swivel
8" wall mount mixing faucet with polished chrome plated
brass body,
18" riser,
44" flexible stainless steel hose with heat resistant handle
and swivel,
1.42 GPM spray valve, compression cartridges with spring
checks,
lever handles,
1/2" NPT female inlets,
6" adjustable wall bracket,
spray valve holder and overhead spring.
Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9
and NSF 372. EP Act 2005 compliant
Wall mounting bracket and finger hook
SPECIAL NOTE:
T&S
B-0133-B-SWV
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 621 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-73
RACK TYPE DISH WASHING MACHINE
WITH DRYER AND CLEAN DISH ROLLER
QUANTITY: 01
SIZE
Width:
Depth:
1900mm
with
Dryer+1800mm
ROLLER
835 mm
CAPACITY
(DIN) 80 Racks/h
(max.) 160 Racks/h
M.E.P REQUIRMENT
PLUMBING :
Cold
¾”
Hot
Waste
2”
ELECTRIC :
Power
37,40 KW
Voltage
400V-50Hz-3N
EXHAUST
Exhaust air volume approx.
150 m³/h
GAS:
BTU
NA
Con.
NA
KIT. EQPT. SPECS
INDIA
UAE
Height:
1900
mm
SPECIFICATIONS
• Rack type dishwashing machine
• Working direction: Right to left operation
• Dryer TR with heat recovery system
• 1800mm Clean dish Roller
• Heating: Electric
• Fresh water final rinse: Soft - cold water
• Performance- (DIN SPEC 10534) Contact time 2 minutes
Transport speed - (DIN) 0,65 m/min
• Transport speed (max.) 1,30 m/min
• Motors Total 3,4kW
• Heating energies Total 34,00Kw
• Total connected load : 37,40KW
• Consumption**Average consumption during typical
operation: 25,80 kW
• Electrical feeding cable Power supply 3N PE 400V 50Hz Max.
rated current 57,9 A
• Max. Elect. cable cross-section 35 mm²
• Fresh water Fresh water final rinse: soft cold 260L/H water
Tankfilling Soft - warm water 80L
• Air outlet*** Waste air volume approx. 150 m³/h
• Waste air temperature approx. 30 °C
• All electrical connections are executed as coded plugs
• Intelligent water level control
• Machine design doesn’t require extraction system – the
machine makes the best use of waste energy resources
• Glass display panel at eye level made from safety glass
• which is easy to keep hygienically clean
• Hinged doors in the wash zone provide easy access to the
• wash arms
• Autotimer Maximum efficiency: saves water, energy and
chemicals
• Stainless steel manifold wash systems with 9 wash arms
• and non-blocking wash nozzles
• Three speed washing
• Suitable for rack size to be 500 mm X 500 mm
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 622 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
Emergency stop switch on clean dish side
ACCESSORIES:
Two (2) sets of strip curtains throughout machine, Molded
standard 500mm X 500 mm size, plastic dish racks
comprising of 20 Peg type plate racks, Open pocket cutlery
racks, 6 no, Power Cord with Plug.
SPECIAL NOTE:
Unit Should be as per Thermo-label and washing cycle as
per DIN Standard.
MEIKO
UPster K-S 160 with
Dryer+roller
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 623 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SC-74
VAPOUR HOOD
QUANTITY: 01
SIZE
Width:
Depth:
Height:
2250mm
1200 mm
600mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
1.2 mm thick S.S. welded body construction.
Height/exhaust Collar as per HVAC consultant.
M.S. hanger rod with turn buckles for hanging.
S.S. grease drawer with handle.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
1000 C.F.M
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUIL
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 624 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SC-75
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1200mm
350mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 625 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SC-76
CLEAN DISH LANDING TABLE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1800mm
750mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
•
EXHAUST
2.0 mm thick. S.S. Top.
Removable full length plastic rollers to be provided as shown
Front & left turned up 75mm, returned 40mm, turned down 50mm
& in 12mm.
250mm High Rear splash, Right as per Dish washer.
Top secured 25mmx 100mm x 25mm, 2.0 mm thick . S.S.
Channel frame work.
Four (04) no. 38mm x 38mm x 1.2 mm thick S.S. square pipe
legs. With adjustable bullet feet
Full width 25 x 25 x 1.2mm thick square pipe S.S. Bottom &
Intermediate shelves.
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 626 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SC-77
WALL MOUNTED RACK SHELF
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1600mm
550 mm
200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
1.2mm thick S.S. Wall Mounted shelf.
Front & both side turned up 75mm, returned 40mm & in 12mm,
Rear sides turned up 75mm & hemmed.
Shelves secured to bracket with acorn S.S. nuts & bolts.
(2) No. 2.0mm thick S.S. wall Brackets angular shape. Secured to
top with acorn Nuts & Bolts & Bracket secured to wall with
anchor fasteners.
12mm dia Bleeder tube at Left side.
Mounting Height- 1400mm A.F.F.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 627 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-82
POCKER CHIP DOLLEY
QUANTITY: 01
SIZE
Width:
Depth:
Height:
677 mm
677 mm
812 mm
CAPACITY
Approximately
Columns.
45-60
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
Per
SPECIFICATIONS
• Should be adjustable to hold plates from 117 to 330 mm in diameter.
• Each caddy to include six adjustable towers.
• With polyethylene exterior that should not crack or chip.
• Vinyl covers to be included.
• 127 mm front swivel casters with brake and non-marking rear wheels.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
COLOUR TO BE CO ORDINATED WITH OPERATER
CO-ORDINATION REQUIRMENT
CAMBRO
METRO.
DCS950
KIT. EQPT. SPECS
INDIA
UAE
PCD11A
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 628 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SC-83
MOBILE CLEAN DISH RACK
QUANTITY: 09
SIZE
Width:
Depth:
Height:
900 mm
600 mm
1900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
Five 1.2 mm thick S.S. Shelves.
Front turned up 12mm @45 deg., Rear & both sides turned up
50mm & hemmed.
S.S. hat type reinforcement
38mm x 38mm x 1.6mm thick S. S. square pipe uprights on Non
marking rubberized castors.
S.S. shelves welded to S.S. square pipe uprights.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 629 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-84
FLUSHING HOSE UNIT
QUANTITY: 01
SIZE
Width
Depth
Height
230 mm
538 mm
498 mm
CAPACITY
15 m hose reel.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
¾”
Hot
∅
¾”
Waste
∅
NA
ELECTRIC :
Power
Voltage
SPECIFICATIONS
• Heavy duty, cast bronze mixer body, suitable for mixing hot &
cold water.
• Furnished with steel enclosed braided Dunlop hose of 15 M
long with brass end nozzle at working end.
• Able to handle 300 PSI and high temperature
• Heavy duty S.S. Rod hose reel rack for winding hose when not
in use.
• Reel rack with stud bolts for anchoring to rear wall, unit
installed 25 mm away from wall, by inserting 25mm deep SS
bush sleeve on the stud bolts.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
T&S
FISHER
5HR-242-01
29602
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 630 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-85
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
550mm
550mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 631 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SC-86
THREE TIER - SERVICE TROLLEY
QUANTITY: 04
SIZE
Width:
Depth:
Height:
900 mm
600 mm
950mm
CAPACITY
3 SHELVES EACH CAPACITY TO
HOLD 80KG
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
SPECIFICATIONS
• Design The serving trolley consists CNS 18/10 (AISI 304),
• Two welded-in, deep-drawn shelves located between a stable round
tube with a diameter of = 25 mm. The shelf surface is micro-polished.
The round tubes on the short sides are used as push handles. A
circumferential 35 mm beveled profile edge on the shelves, the rollerburnished shelf edge and one-piece welded seams between the tube
frame and the shelves increase the stability of the serving trolley.
• The shelves are lined underneath with a noise-insulating antidumping
mat.
• The serving trolley on s/s castors (4 steering castors, 2 of them with
locks, castor diameter 125 mm). The castors inserted in the tube frame.
Solid synthetic (polyamide) wall guards at all four corners protect
against damage.
• Load-bearing capacity per shelf: 80 kg
• Number of shelves: 3
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
BLANCO GERMANY
HUPFER
SW 8 X 5 -3
Equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 632 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-01
PICK UP TABLE WITH SINK & UNDER
SPACE
FOR
UNDER
COUNTER
REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
3600 mm
800 mm
865mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Waste
∅
2”
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
•
EXHAUST
NA
•
•
GAS:
BTU
NA
Con.
∅
NA
•
2.0mm thick S.S. Top.
150mm High right splash.
Top secured to 12/25mm x 75mm x 25/12mm x 2.0 mm Thick S.S.
hat type welded channel frame work.
Ten (10) no. 150mm high, 38mm x 38mm x 1.2 mm thick S.S.
square pipe. legs. With adjustable bullet feet.
Rear & both sides 0.9mm thick cladding
Left side of unit provided space for modular under counter
refrigerator.
Right side of unit provide One (1) no. 450mm x 450mm x 200mm
deep x 2.0mm thick S.S. sink, Sink Complete with 50mm dia lever
handle operated waste outlet & rear connected overflow.
0.9mm thick S.S Apron front of Sink.
25mm x 25mm x 1.6mm thick S.S. square pipe cross bracing
welded to legs at as shown.
Left side of sink provided space for mobile equipment garbage can.
& balance space as shown provide 1.2mm thick S.S. bottom and
middle shelves
•
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 633 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-01A
CEILING HUNG 2 TIER FOOD PICK UP
SHELVES
QUANTITY: 01
SIZE
Width:
Depth:
Height:
3600mm
400 mm
300mm
+1000mm
rod
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
EXHAUST
1.2mm thick S.S. shelves.
Lower shelf all sides turned down 40mm & in 12mm, bottom of
shelves to be closed.
Upper shelf front & both sides turned down 40mm & in 12mm,
Rear turned up 50mm & hemmed, bottom of shelves to be closed.
S.S. hanger rod size as per ceiling height.
25mm x 25mm S.S. pipe hanging support.
Mounting Height-1400mm A.F.F.
Upper shelf of unit suitable mounting arrangement for infra red
food warmer.
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 634 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-02
UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
1865mm
700 mm
800 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.45 K.W.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Equipment mounted below S.S. top.
304 S/S interior and exterior
0.9mm thick S.S. at back and base
Three (03) no. door with handle
Door opening as per GN. 1/1 pan.
Door activated lights
Six (06) no. PE coated shelves
Ambient temperature 43 deg C.
Internal Temp +1 Deg C to +4 Deg C.
Air-cooled.
REFRIGERANT GAS: R-134 A
Compressor unit on Right side to be provided.
Removable Cassette type condensing unit
Rounded edge for internal chamber
Automatic defrost
Anti condensation heaters fitted to door mullions
Digital temperature controller with compressor running
indicator, defrost indicator, condensing cleaning light, fan
running indicator, high low temperature alarm.
Six (06) nos. legs with bullet feet.
ACCESSORIES:
SPECIAL NOTE:
FOASTER
WILLIAMS
IGLU
PRO1/3 H
HO3U-DDDX
equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 635 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-03
GARBAGE CAN
QUANTITY: 02
SIZE
Width:
502 mm
Dia:
410 mm
CAPACITY
70 liters
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Height:
673 mm
SPECIFICATIONS
• Polyethylene Construction.
• With rust, dent, chip or peel free.
• Heavy duty Pedal Mechanism.
• Tight fitting overlapping lid.
• With Round Corner.
• 70 Liter Container Equipped with 2 full plastic Rear Wheels for
better maneuverability.
• Unit should be suitable for work in Food service area.
• Color and qty As Per operator.
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Color and qty As Per operator.
PROBBAX
S0-1271
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 636 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-04
S.S CLADDED MOBILE TANDOOR
QUANTITY: 02
SIZE
Width:
Depth:
Height:
850 mm
850 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
2.0 mm thick S.S. Top.
150mm high rear & wall side Splash. (Rea splash profile to be
match adjoining modular Cooking equipment)
• Commercial grade heavy duty tandoor approx 700mm dia x 700mm
height with 300mm dia mouth.
• Top and body secured to 12/25mm x 75mm x 25/12mm # 1.6 mm
Thick S.S. hat type welded channel frame work..
• Exterior # 18 Ga. S.S. cladding.
• Interior # 18 Ga. M.S. cladding.
• 40mm thick Mineral wool insulation.
• Front S.S. Ash removable opening with shutter.
• (4) no. heavy duty 125mm Dia Non marking rubberized castors all
with brakes.
• Front profile/ rear splash height and profile to be match
adjoining cooking battery.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
mm
ACCESSORIES:
Steel cover, Skewers, Jodi, Cushion.
SPECIAL NOTE:
All Sheet /Pipe S.S. 304 Grade Pre-polished Plastic Coated.
MUNNILAL
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 637 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-05
SPREADER TABLE
QUANTITY: 02
SIZE :
Width:
Depth:
Height:
425mm
850mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
•
•
•
•
EXHAUST
2.0mm thick S.S. Top.
150 mm high rear splash
Top and body secured to 12/25mm x 75mm x 25/12mm x 1.6 mm
Thick S.S. hat type welded channel frame work.
Four (4) no., 38mm x 38mm x 1.6mm thick S.S. square pipe legs
with S.S. adjustable bullet feet.
One (01) no. Sliding Drawer with Six (6) no 1/6 G.N pan .
1.2mm thick S.S. bottom shelf.
0.9mm thick S.S. cladding.
Front profile/ rear splash height and profile to be match
adjoining cooking battery.
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 638 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-06
TWO BURNER RANGE
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
1200mm
850mm
750mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
SPECIFICATIONS
• 2.0 mm thick S.S. Top.
• 300mm High Rear Splash. (match with adjoining equipment
splash height)
• Top and body secured to 12/25mm x 75mm x 25/12mm # 1.6 mm
Thick S.S. hat type welded channel frame work. .
• Exterior # 1.2 mm thick S.S. cladding.
• 25 mm Full under shelf.
• Two (2) no. 400mm x 400mm Cast iron grates (Removable).
• Two (2) no. H.P. burner with pilot lamp.
• Two (2) no. 1.2 mm thick S.S. drip tray with Integral handle.
• Built in pressure Controller regulator.
• 38mm x 38mm S.S. square pipe legs. With adjustable bullet feet.
GAS:
BTU
14,0000
Con.
∅
¾”
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 639 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-07
GRIDDLE PLATE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1000mm
900 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• smooth plate
• Equipment to Operate on LPG Gas.
• Freestanding Fry top.
• Rear splash.
• Cooking Surface of 964 W X640 D
• Splash Back in Stainless steel grids on three sides.
• Inner and outer Body AISI 306 Stainless steel
• S.S. Legs with S.S. adjustable feet.
• Under Storage cupboard with Front hinged doors.
• Lateral drain channel for cleaning.
• Piezo ignition.
• Flame failure device.
• Fat collecting container.
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
56689
Con.
∅
¾”
ACCESSORIES:
Scrapper with brush; Splash guard
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing
with plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 640 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-08
DEEP FAT FRYER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
800 mm
850 mm
900mm
CAPACITY
2 X 12.5 Liter
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.2 K.W.
Voltage
220v-50c-1p
EXHAUST
NA
SPECIFICATIONS
• Gas operated equipment.
• AISI 306 Constructions.
• Rear splash.
• Unit with 2 number of frying well tanks with capacity of 25.0
liters for well.
• Two No (2) Baskets.
• 2 Lids.
• 2 oil clarifying trays.
• Unit provided with deep cold zone to collect food debris.
• Under Storage cupboard with Front hinged doors.
• S.S. Legs with S.S. adjustable feet
• Piezo ignition.
• Flame failure device.
GAS:
BTU
146845
Con.
∅
3/4
"
ACCESSORIES:
Oil Filter for fryer; Oil receptacle
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 641 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-09
SPREADER TABLE
QUANTITY: 02
SIZE
Width:
Depth:
Height:
400 mm
900 mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• Free Standing.
• S.S. Construction AISI 306.
• Under storage cupboard.
• Rear splash.
• S.S. Legs with S.S. adjustable feet.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Part of Cooking Battery. Provide Hair-line Finish. Shop drawing with
plan, elevation and section to be submitted for approval.
ELECTROLUX
MKN
THERMALINE
OPTIMA 850
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 642 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-10
EXHAUST HOOD WITH UV GREASE
REMOVAL COMPLETE WITH DEMAND
CONTROL VENTILATION & FIRE
SUPRESSION SYSTEM
QUANTITY: 01
SIZE
Width
Depth
Height:
6300mm
1300mm
555mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅ NA
Wast
e
∅ NA
SPECIFICATIONS
•
•
ELECTRIC :
Power
0.5 K.W (for
light)
Voltage
220v-50c-1p
EXHAUST
•
4,900 CFM
GAS:
BTU
NA
Con.
∅
KIT. EQPT. SPECS
INDIA
UAE
•
•
•
The kitchen canopy shall be constructed from 1.0 mm
AISI 304 stainless steel and shall be supplied complete
with grease filters (UL listed), pressure measurement
taps, exhaust adjustment systems. The canopy shall
be HACCP certified.
The system to include lightweight stainless steel UV
lamps cassettes, directly integrated in the exhaust
plenum, behind the double stage mechanical filtration.
Cassettes should be easily removable by disconnecting
the electrical connectors.
Outer casing panels to be constructed from AISI 304
stainless steel in a brushed satin finish, in a modular
Construction. The joints of the lower edge shall be
fully welded to be liquid-tight, avoiding harmful
dripping of condensation. All exposed welds should be
ground and polished to the metal’s original finish.
The bottom edge of the exhaust plenum should be
aerodynamically designed (no flat surface).
Canopy ends shall be of double-sidewall construction.
Exhaust
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 643 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
•
•
•
•
•
•
KIT. EQPT. SPECS
INDIA
UAE
The exhaust air flow will be based on the convective
heat generated by the appliances under each canopy.
Submittal shall include convective heat calculations
based on the input power of the appliances served.
Grease filters
The canopy shall be equipped with a stainless steel
grease filter. The grease removal efficiency should be
95% for particles a diameter of 10 microns or larger.
The filter shall be NSF and UL classified. Baffle or slot
type grease filters shall not be used.
Exhaust Balancing dampers
Every spigot connections for extracted air shall be
supplied with an automated motorized balancing
damper. The damper shall automatically adjust
exhaust airflow based on direct pressure readings
from integral T.A.B test and balance port in the hood.
The Model ABD will have night time setback feature
which will automatically close the damper when the
exhaust system is shut down to prevent outside air
from migrating into the space. The Model ABD should
fail safe open on power interruption.
The damper outer casing shall be constructed of
continuously welded 1.2mm thick S.S.including the
balancing blades. Adjustment of the parallel dampers
(in open position) will be achieved by manually turning
the locking adjustment bracket until the desired
pressure reading is achieved.
Light Fixtures
Each canopy shall be provided with a LED light fixture
to provide approx. 500 lux at the cooking appliances
work surface. The light is protected with a stainless
steel hatch with plain milled finish, surrounded by a
tempered-glass light diffuser (the heat tolerance of the
glass shall be -40 to 300 °C).
Demand Control Ventilation
The system to come equipped with hood mounted
infrared cooking activity sensors capable of measuring
appliance surface temperatures. Infrared sensor will
read appliance surface temperature which will be
translated by the specific calculation algorithm for that
appliance and will respond proactively to any change
in cooking status. Infrared sensor and exhaust collar
mounted temperature sensor work in concert on
differential temperature reading back to the controller.
The system shall automatically control the speed of
the exhaust fan (and supply fan if applicable) based
on appliances status, cooking activities and exhaust air
temperatures. The system can be controlled with
either manual On/Off switch, a 24hrs automated
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 644 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
schedule with a manual override function, or the
hoods can be automatically regulated based on the
appliance status. The integrated PLC will analyze
signals from the cooking activity sensors, temperature
sensors and pressure transducers mounted in the
hood and then send a signal to the VFD(to be
provided by HVAC contractor) to adjust the exhaust
fan (and supply fan if applicable) speed to satisfy
current cooking load conditions, as well adjust the
automated balancing dampers accordingly. The
system can be monitored and controlled with an
internet connected PC from either a local or remote
location.
Fire Suppression system
Provide an automatic, water-assisted, wet chemical,
fire suppression System with provision of manual pull
station to be located in a path of egress at a maximum
height of 60 inches above the floor.Unit to be provided
with nozzles for equipment protection, plenum
protection and duct protection.Should provide 100%
protection as required by codes, standards, national,
state, and local requirements.Provide fusible links in
each exhaust duct cut-out and at a maximum gap of 2
feet (610mm) between them.Unit to be provided with
water inlet which would be connected to the fire pipe
line.Stainless steel pipe drops to be provided to the
discharge nozzles and plenum both. Discharge nozzles
should not exceed 610mm from each other.The
system, including all of its components, shall be UL
Standard 300/ ULC Standard ORD-C1254.6 Listed.
Automatic actuation shall be initiated by separation of
fusible links. Fusible link break temperature should be
as per the equipment below the same.
Distance of cylinder assembly & pull down points as
per lay out plan.
Unit should be complete of Gas shut off valve,
Disconnect system for Electrical equipment, Hood light
(incase of same is in a non fire rated enclosure,
Disconnect hvac system.
ACCESSORIES:
Standard accessories for installation, operations and
maintenance to be provided.
SAFETY NORMS:
UV access door closing and filters presence shall be
permanently controlled with maintenance free magnetic
proximity switches (automatic and immediate UV lamps
switch off).
• Each UV canopy section is equipped with a plug and play UV
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 645 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
module, integrated behind the light casing, ease of access
using the light hatch. Each UV module shall communicate with
a UV control panel, integrated in one of the canopy section.
The control panel displays warnings or
potential working defaults and shall be able to identify on
which canopy section where they occur and, if needed, which
ballast or lamps are concerned.
SPECIAL NOTE:
•
•
•
Fire suppression system should be installed by a certified vendor
and all testing and commissioning certificated needs to be
provided.
Minimum of five (05) years maintenance contract should be there
between the client and the fire suppression system vendor for
periodic maintenance inclusive cylinder and accessories as per fire
norms.
Detail provided in this specification in terms of number of Nozzles,
ducts cut outs , distance of unit etc. needs to be coordinated and
verified by Vendor. Any Deviation from above mention and
specification to be brought to the notice else it is expected that the
vendor in following complete specification as mentioned above.
HVAC Cutouts and fresh air cutouts to be coordinated with HVAC consultant. Shop drawing
with plan, elevation and section to be submitted for approval.
HALTON+ANSUL
UVI+ MARVEL+(P07+P10)
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 646 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BP-15
HAND WASH SINK UNIT
QUANTITY: 02
SIZE
Width:
Depth:
384 mm
353 mm
CAPACITY
6 l/ min
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Wast
e
∅
1½”
ELECTRIC :
Power
NA
Voltage
NA
Height:
512 mm
SPECIFICATIONS
• Wall mounted knee-activated hand wash sink.
• S.S. construction.
• 240mm High Splash.
• Knee operated water faucet.
• Round pressed bowl.
• Depth of Wash Bowl: 150mm.
• With hot and cold water mixer.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
∅
ACCESSORIES:
•
Soap dispenser, Paper dispenser, S.S. Garbage
Bin
SPECIAL NOTE:
SOFINOR
LMASBD
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 647 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-16
POT WASH SINK UNIT
QUANTITY: 01
SIZE
Width:
Depth:
Height:
2850mm
800 mm
750mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
(2)½”
Hot
∅
(2)½”
Waste
∅
(3)2”
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
EXHAUST
•
NA
GAS:
•
BTU
NA
Con.
∅
2.0 mm Thick S.S. Top.
250mm High Rear & both sides Splash. Front turned up 25mm,
returned 40mm, down 75mm & in 12mm.
Top secured to 12/25mm x 75mm x 25/12mm x 1.6 mm Thick
S.S. hat type welded channel frame work.
Right side of top provided One (1) no. 800mm x 600mm x
350mm deep, & Two (02) nos. 600 mm x 600 mm x 350 mm
deep, 2.0mm thick. S.S. sinks, Sink Complete with 50mm dia
lever handle operated waste outlet & rear connected overflow.
Eight (08) no. 38mmx 38mm x 1.6mm thick. S.S. square pipe
legs. With adjustable bullet feet.
25mm x 25mm x 1.6mm thick S.S. pipe cross bracing welded to
legs at Rear & both sides.
0.9mm thick S.S Apron front & right of Sink.
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 648 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-16A
PRE- RINSE SPRAY UNIT WITH FAUCET
QUANTITY: 02
SIZE
Width:
315mm
Depth:
358mm
Height:
850mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
Hot
ᴓ
Waste ᴓ
ELECTRIC :
Power
Voltage
EXHAUST
NA
GAS:
BTU
Con.
½”
½”
NA
NA
NA
SPECIFICATIONS
•
•
•
•
•
NA
ᴓ NA
ACCESSORIES:
•
•
•
•
•
Easy Install Pre-Rinse, Spring Action, 8" Wall Mount Base,
Wall Bracket, & Swivel
8" wall mount mixing faucet with polished chrome plated
brass body,
18" riser,
44" flexible stainless steel hose with heat resistant handle
and swivel,
1.42 GPM spray valve, compression cartridges with spring
checks,
lever handles,
1/2" NPT female inlets,
6" adjustable wall bracket,
spray valve holder and overhead spring.
Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9
and NSF 372. EP Act 2005 compliant
Wall mounting bracket and finger hook
SPECIAL NOTE:
T&S
B-0133-B-SWV
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 649 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-17
WALL MOUNTED POT RACK
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1200 mm
375 mm
245 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
Four (4) no. 25mm x 25mm X 16 ga. S. S. square pipe welded
construction.
75mm high splash/railing at rear & both sides.
S.S. pipe shelf welded to S.S. brackets.
Three (3) no. 2.0 mm thick S.S. wall Brackets. Secured to top
with acorn Nuts & Bolts & Bracket secured to wall with anchor
fasteners.
Mounting Height- 1500mm A.F.F.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 650 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-18
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1500mm
600mm
150 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 150 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 651 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-19
MOBILE POT RACK
QUANTITY: 04
SIZE
Width:
Depth:
Height:
900 mm
600 mm
1900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
Four (4) no. S.S. pipe shelves.
First shelf 300 A.F.F., Second 900 A.F.F. Third shelf 1375mm
A.F.F. & Fourth shelf at 1850mm A.F.F.
Shelf outer tube 32mm dia S.S. pipe with 25mm dia S.S pipe
welded to outer tube at 75 c/c.
Four (4) no. 38mm dia S.S. pipe upright on castor.
Four (4) no. 150mm dia Non marking rubberized castors two
with brakes.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 652 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BP-20
QUANTITY: 01
SIZE
FLUSHING HOSE UNIT
Width
Depth
Height
230 mm
538 mm
498 mm
CAPACITY
15 m hose reel.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
¾”
Hot
∅
¾”
Waste
∅
NA
ELECTRIC :
Power
Voltage
SPECIFICATIONS
• Heavy duty, cast bronze mixer body, suitable for mixing hot &
cold water.
• Furnished with steel enclosed braided Dunlop hose of 15 M
long with brass end nozzle at working end.
• Able to handle 300 PSI and high temperature
• Heavy duty S.S. Rod hose reel rack for winding hose when not
in use.
• Reel rack with stud bolts for anchoring to rear wall, unit
installed 25 mm away from wall, by inserting 25mm deep SS
bush sleeve on the stud bolts.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
FISHER
T&S
29602
5HR-242-01
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 653 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BP-21
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
550mm
550mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 654 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-26
MOBILE WORK TABLE
QUANTITY: 05
SIZE
Width:
Depth:
Height:
1400mm
650 mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
2.0 mm Thick S.S. Top.
Top secured to 12/25mm x 75mm x 25/12mm # 1.6 mm Thick S.S.
hat type welded channel frame work.
38mm x 38mm x 1.6mm thick S.S. square pipe legs. On castor.
Full width 1.2 mm thick S.S. Bottom & intermediate shelves.
Four (4) no. 125mm Dia Non marking rubberized castors two (2)
with brakes.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 655 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BP-27
MOBILE HOT FOOD HOLDING CART
QUANTITY: 02
SIZE
WIDTH:
DEPTH:
HEIGHT:
659 MM
773 MM
1922 MM
CAPACITY
AS PER GN 2/1 PAN
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
2.0 K.W
Voltage
220v-50c-1p
EXHAUST
NA
SPECIFICATIONS
• Fully Insulated Hot Cabinet Keeps Prepared Foods At Serving
Temperatures.
• High Temperature Ceramic Magnetic Latches
• For "Easy Open"; Twist-Lock Catch Secures Door
• During Transport. Latches And Hinges Mounted Inboard.
• External And Internal Made In Aisi 304 Stainless Steel.
• Internal Parts To Be Removable And Rounded Corners.
• Full Size Glass Door With Gasket, 3 Fixed Positions And Heat
Reflecting Thermo Glass
• Interior Lightning In Cabinet
• Fan For Heat Distribution In Cabinet
• To Be Provided With A Tray For
• Combistat To Control Operation Of Cabinet
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
•
ALL ACCESSORIES
OPERATION,
KIT
REF.ELECTRONIC.
FOR INSTALLATION AND
HACCP
ADV.CONNECTION-
SPECIAL NOTE:
ALTO-SHAAM
HUPFER
REIBER
1200-UP
EQUIVLANT
EQUIVLANT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 656 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BP-28
MOBILE COLD FOOD HOLDING CART
QUANTITY: 02
SIZE
Width:
Depth:
Height:
673 mm
927 mm
1727 mm
CAPACITY
21 1/1 GN(65MM DEEP)
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.5 h.p.
Voltage
220v-50c-1p
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIFICATIONS
• Fully insulated mobile ChillTemp® refrigerated
• Cabinet
• Overload reset. R134a refrigerant for
• Environmental compatibility.
• Self-closing insulated door prevents temperature
• Loss. Magnetic door gaskets for proper seal. Field
• Reversible for flexibility.
• The whole interior cell is constructed of AISI 304 stainless steel
with round corners
• Bottom door gasket adjustable
• Designed to operate at ambient temperatures of up to 43ºC.
• Automatic defrost.
• When temperature exceeds critical limits it provided with an
acoustic and visual alarm.
• Controlled humidity
• Ventilated cooling
• Refrigerant R 134 A.
KIT HACCP ADV.CONNECTION-REF.ELECTRONIC
SPECIAL NOTE:
ALTO-SHAAM
HUPFER
REIBER
1000-MR
EQUIVLANT
EQUIVLANT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 657 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-29
QUANTITY: 01
SIZE
UPRIGHT TWO DOOR FREEZER
Width:
Depth:
Height:
700 mm
800 mm
1975 mm
CAPACITY
600 Liter
M.E.P REQUIRMENT
PLUMBING :
Cold
NA
Hot
NA
Waste
NA
ELECTRIC :
Power
0.6 KW
Voltage
220v-50c-1p
EXHAUST
NA
GAS:
BTU
NA
Con.
NA
ACCESSORIES:
SPECIFICATIONS
• AISI 304 SS exterior and interior
• Full AISI 304 SS back
• With hydrocarbon refrigerant
• Heavy duty castors with breaks
• Two half door (right hinged)
• Internal temp is - 180 C to - 210 C).
• Ambient temperature of operation – 43 deg C.
• Hot gases defrost.
• Fuzzy logic controllers.
• Double dipped coils
• 60 mm high density insulation
• Heavy duty magnetic gasket
• Solid state fan cut out switch
• Rifled copper tubing
• Corrugated evaporator fins
• removable plug box and lid for easy service access
• LED temperature display
• Safety Alarm
• Removable shelves
• Three shelves of size 530 X 650
• Drip tray with heating
additional nylon coated shelf
SPECIAL NOTE:
FOSTER
WILLIAMS
IGLU
EPRO G600L
LG1T
equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 658 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-30
UPRIGHT BOTTLE COOLER
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
645 mm
633 mm
1770
mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.35 k.w.
Voltage
220v.50c.1p.
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
• 304 S/S exterior and 304 BA MIRROR S/S interior
• S.S. at back and base
• Six S/S Perforated removable & adjustable shelves
• One double glazed Argon gas door (Left hinged)
• Bright low energy lighting, with on/off switch
• Ambient temperature 32 deg C.
• Internal Temp +4 Deg C to +10 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A
• Condensing unit at the bottom and back side
• Rounded edge for internal chamber
• waste heat recovery vaporizer
• Automatic defrost
• Anti condensation heaters fitted to door mullions
• Digital temperature controller with compressor
running indicator, defrost indicator, condensing
cleaning light, fan running indicator, high low
temperature alarm
ACCESSORIES:
SPECIAL NOTE:
WILLIAMS
IGLU
BC95SS
EQUIVLANT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 659 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-36
MILK WARMER
QUANTITY: 01
SIZE
Dia:
Depth:
Height:
210 mm
--
423 mm
CAPACITY
Holding capacity 5 Liter.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
1.8 KW
Voltage
220v-50c-1p
SPECIFICATIONS
• Electrically operated
• Double jacketed urn with bain-marie heating method
• With no drip faucets.
• Complete with thermostat,
• S.S construction.
• Visible water level in Bain-Marie.
• Temperature Display.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
ANIMO
BRAVILOR BONAMAT
MWR 5N
HM-505
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 660 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-36A
WATER FILTER FOR MILK WARMER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
8.04”
5.25”
7.59”
CAPACITY
9000 GALLONS
(34069 liters)
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
SPECIFICATIONS
• NSF certified scale stick.
• Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
• Include built in water shut-off valve system.
• Built in water pressure gauge.
• Shipping Weight is 6lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
TEMPERATURE:
80°F(27°C)
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
10-125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE
QC71 SINGLE-MH2
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 661 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BP-37
WATER BOILER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
218 mm
459 mm
532 mm
CAPACITY
Holding capacity 4 liters.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
2.5 KW
Voltage
220v-50c-1p
SPECIFICATIONS
• Electrically operated.
• Automatic water filling.
• With no drip faucets.
• Complete with thermostat.
• S.S construction.
• Temperature indicator.
• Over temperature shut-off.
• Equipped with a de-scale indicator.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
ANIMO
BRAVILOR BONAMAT
WKT-D 5N VA
HWA 40
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 662 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-37A
WATER FILTER FOR WATER BOILER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
8.04”
5.25”
7.59”
CAPACITY
9000 GALLONS
(34069 liters)
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
SPECIFICATIONS
• NSF certified scale stick.
• Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
• Include built in water shut-off valve system.
• Built in water pressure gauge.
• Shipping Weight is 6lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
TEMPERATURE:
80°F(27°C)
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
10-125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE
QC71 SINGLE-MH2
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 663 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-38
GARBAGE CAN
QUANTITY: 01
SIZE
Width:
502 mm
Dia:
410 mm
CAPACITY
70 liters
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Height:
673 mm
SPECIFICATIONS
• Polyethylene Construction.
• With rust, dent, chip or peel free.
• Heavy duty Pedal Mechanism.
• Tight fitting overlapping lid.
• With Round Corner.
• 70 Liter Container Equipped with 2 full plastic Rear Wheels for
better maneuverability.
• Unit should be suitable for work in Food service area.
• Color and qty As Per operator.
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Color and qty As Per operator.
PROBBAX
S0-1271
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 664 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BP-39
BEVERAGE TABLE W/SINK & TROUGH
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
2700mm
750 mm
865mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
•
•
•
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Waste
∅
2”
•
Power
NA
•
Voltage
NA
•
ELECTRIC :
EXHAUST
•
•
NA
GAS:
BTU
NA
Con.
∅
•
NA
2.0 mm thick S.S. Top.
150mm High Rear Splash.
Top secured to 12/25mm x 75mm x 25/12mm x1.6 mm Thick S.S.
hat type welded channel frame work.
Right of unit One (1) no. 450mm x 450mm x 200mm deep x
1.6mm thick S.S. sink, Sink Complete with 50mm dia lever handle
operated waste outlet & rear connected overflow.
Eight (08) no. 38mm x 38mm x 1.6mm thick S.S. square pipe. legs.
With adjustable bullet feet.
25mm x 25mm x 1.6mm thick S.S. square pipe cross bracing
welded to legs at part rear & left sides. (Below sink Front open.
0.9mm thick S.S Apron front & right of Sink.
Left side of sink provided space for parking mobile garbage can,
& balance left space for 1.2mm thick part bottom and middle shelf
to be provided.
Top of unit approx 1500mm x 100mm x 25mm S.S. trough with
perforated cover to be provided. Trough drain to be connected
waste outlet of sink.
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 665 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BP-40
WALL SHELF
QUANTITY: 01
SIZE
Width:
Depth:
Height:
2700 mm
300 mm
200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
1.2 mm thick S.S. Wall shelf.
Rear & both sides turned up 50mm & Hemmed out side, Front
turned down 38mm & in 12mm.
Shelves secured to bracket with acorn S.S. nuts & bolts.
Four (04) no. 2.0 mm thick S.S. wall Brackets. Secured to top
with acorn Nuts & Bolts & Bracket secured to wall with anchor
fasteners.
Mounting Height- 1700 A.F.F.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 666 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BP-41
COFFEE MACHINE WITH GRINDER
QUANTITY: 01
SIZE
Width:
325
mm
+
225
Depth:
Height:
680 mm
600 mm
120 cups per hour.
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
3/8”
(Purified)
Hot
∅
NA
Waste
∅
1”
ELECTRIC :
Power
3.5 KW
Voltage
440v-50c-3p
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
SPECIFICATIONS
• Fully automatic machine.
• With single grinder.
• Machine with hourly production of.
• Coffee: 120 Cups,
• Espresso: 180 cups,
• Café crème: 120 cups ,
• Cappuccino: 120 cups,
• Hot water: 20 liters.
• Machine with auto cleaning mechanism.
• Separate hot water and steam outlets.
• Integrated milk frother.
• Metal brewing unit with constant piston heater.
• Stainless steel tanks for coffee, hot water & steam.
• Low-noise precision grinder with direct grinding.
• See through Coffee bean container of 1.5 kg capacity.
• Manual filling funnel for ground coffee.
• Adjustable coffee dispenser from 80 to 150 mm.
ACCESSORIES:
Refrigeration Milk unit, Cup warmer
SPECIAL NOTE:
Outer Finish to be co-ordinate with Operator
FRANKIE
SWISS AGRO
WMF
EVOLUTION (E 1M HD CF).
ONE TOUCH TOP-MILK
BISTRO 03.8301.1001
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 667 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: BP-41A
CLARIS HEAD & CARTRIDGE M
COFFEE MACHINE WITH GRINDER
FOR
QUANTITY: 01
SIZE
Width:
Depth:
Height:
3.31”
4.68”
5.78”
CAPACITY
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
TEMPERATURE:
39 - 86°F(4-30°C)
SERVICE FLOW RATE:
MAX. 0.5 GPM
PRESSURE
REQUIREMENTS:
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Built in Flush Port.
Auto shut-off.
Adjustable by-pass.
Flow restrictor.
Backflow restrictor.
CLARIS CARTRIDGE MEDIUM SIZE TO BE INSTALLED.
H: 15.43” AND W: 3.74”
MICRON RATING:- 5.00
Features include:Chlorine reduction
Ion exchange
Particulate reduction
Prefiltration
Scale control
Taste & odor
Water softening/Conditioning.
DO NOT USE TREAT CONDENSATE COOLING WATER.
29-116 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE CLARIS HEAD
EV-4339-21 & EV-4339-11
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 668 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-42
MOBILE ICE BIN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
590 mm
765 mm
740 mm
CAPACITY
45.5 KGS
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
Capacity 45.5 kg.
Polyethylene body
Double wall and deep insulation will hold ice for extended
periods.
Rust and corrosion-proof polymer construction.
Large rear wheels and front swivel casters.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Unit Exterior Color & finishing to be confirmed by Operator
CAMBRO
METRO
ICS100L
IC 125
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 669 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-43
WATER COOLER
QUANTITY: 01
SIZE
Width:
600 mm
Depth:
600mm
CAPACITY
120 lt
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ ¾”
(Purified)
Hot
∅ NA
Waste
∅
1”
ELECTRIC :
Power
0.5 H.P
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
Height:
As per cap.
SPECIFICATIONS
•
•
•
•
•
•
•
•
Full S.S Construction
AISI 304 SS exterior and interior
Freestanding
SS legs.
All S.S construction and finish.
Provided with Two (2) no. of faucet.
Refrigerant gas R-22 to be used.
S S drip pan.
NA
ACCESSORIES:
SPECIAL NOTE:
Power Cord with plug
BLUE STAR
EQUIVLANT
CAP-120 LTRS.
LOCAL MARKET EQUIPMENT BYCLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 670 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-43A
WATER FILTER FOR WATER COOLER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
8.04”
5.25”
7.59”
CAPACITY
9000 GALLONS
(34069 liters)
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
SPECIFICATIONS
• NSF certified scale stick.
• Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
• Include built in water shut-off valve system.
• Built in water pressure gauge.
• Shipping Weight is 6lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
TEMPERATURE:
80°F(27°C)
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
10-125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE
QC71 SINGLE-MH2
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 671 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-44
ICE CUBE MACHINE W/BIN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
762 mm
863 mm
2019 mm
CAPACITY
467 kg per day
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
3/8”
(Purified)
Hot
∅
NA
Waste
∅
½”
¾”
and
ELECTRIC :
Power
2.25 HP
Voltage
220v-50c-1p
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
Air cooled.
Unit should be able to work in ambient temperature 43.3o C
Unit with automatic cleaning system.
Removable water distribution tube with no tools.
With cove corners.
Liquid refrigerant shut off valve.
Suction refrigerant shut off valve
Cleaning and with antimicrobial.
Programmable ice production.
Dice production size is 22.2 X 22.2 X 22.2.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
With Scoop , scoop holder and Ice Storage Bin
SPECIAL NOTE:
MANITOWOC
SCOTSMAN
SD-1202A
C1030MW-32A
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 672 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-44A
WATER FILTER FOR ICE CUBE MACHINE
WITH i20002 REPLACEMENT CARTRIDGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
8.04”
5.25”
7.59”
CAPACITY
9000 GALLONS
(34069ltrs)
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
TEMPERATURE:
35 - 100°F(2 - 38°C)
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
SPECIFICATIONS
• Sophisticated Hydro blend compound prevents lime scale
formation in high temperature steam applications.
• Fine filters incoming water to improve the performance,
maximize energy efficiency and increase the life of steam
equipment.
• New and improved Micro-pure ΙΙ media with AgION
antimicrobial protection.
• Self-contained scale inhibitor.
• Pre coat submicron technology
• NSF certified under NSF/ANSI Standards 42 and 53.
• Features include: Bacteriostatic, Cyst reduction, Particulate
reduction, Scale control.
• Micron rating is up to 0.50.
• Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
• Cartridge dimensions are 20.75”H & 3.25”Diameter.
• Shipping Weight is 6lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
10-125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE QC71 SINGLE HEAD
EV-927241 & EV-961222
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 673 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-45
DRAIN TROUGH GRATING
QUANTITY: 01
SIZE
Width:
Depth:
Height:
900mm
350mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 674 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-46
STORE ROOM SHELVING- BANQUET STORE
QUANTITY: 09
SIZE
WIDTH:
DEPTH:
HEIGHT:
1060MM
610MM
2000 MM
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
cold
∅
NA
hot
∅
NA
waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
GAS:
BTU
NA
CON.
∅
SPECIFICATIONS
• Corrosion Proof Polymer Mats With Natural Finish
• Total five (05) no. shelves..
• Polymer Mat With Exclusive Built In Antimicrobial Product
Protection
• S.S Uprights.
• Edge Reinforced Nylon.
• With Corner Hooks
• Hanging Rails
• Shelf Support.
• Maximum Load 600 Kg Per Field.
• Adjustable Shelves
• With Adjustable S.S Feet.
• Shelving To Be Installed As Continuous Length With Common
Uprights With Maximum Distance Of 1050 Mm.
ACCESSORIES:
SPECIAL NOTE:
Space saving common use of uprights between 2 shelving units
possible, depending upon site / space conditions. The sizes and
number can verify as per the final plan of the store.
CAMBRO
HUPFER
METRO
CAMSHELVING
NORM 12
METROMAXQ
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 675 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : BP-47
STORE ROOM SHELVING- VIDEO EQUIPMENT
STORE
QUANTITY: 05
SIZE
WIDTH:
DEPTH:
HEIGHT:
1060MM
610 MM
2000 MM
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
cold
∅
NA
hot
∅
NA
waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
GAS:
BTU
NA
CON.
∅
SPECIFICATIONS
• Corrosion Proof Polymer Mats With Natural Finish
• Total five (05) no. shelves..
• Polymer Mat With Exclusive Built In Antimicrobial Product
Protection
• S.S Uprights.
• Edge Reinforced Nylon.
• With Corner Hooks
• Hanging Rails
• Shelf Support.
• Maximum Load 600 Kg Per Field.
• Adjustable Shelves
• With Adjustable S.S Feet.
• Shelving To Be Installed As Continuous Length With Common
Uprights With Maximum Distance Of 1050 Mm.
ACCESSORIES:
SPECIAL NOTE:
Space saving common use of uprights between 2 shelving units
possible, depending upon site / space conditions. The sizes and
number can verify as per the final plan of the store.
CAMBRO
HUPFER
METRO
CAMSHELVING
NORM 12
METROMAXQ
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 676 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SM-02
CABINET FOR BEER CHILLER/KEGS
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1500mm
610 mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Gas:
SPECIFICATIONS
•
•
•
•
•
•
•
BTU
NA
Con.
∅
•
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom shelf
Three (03) no. 1.2 mm thick door with handle &
locking arrangement.
Door location size, cabinet size please verify /
Coordinated with Beer vendor before equipment
production
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 677 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SM-03
GLASS WASHER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
460 mm.
575 mm.
700 mm.
CAPACITY
40 rack/hr
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
¾”(purif
ied)
Hot
∅
¾”
Wast
e
∅
2”
ELECTRIC :
Power
3.5 K.W
Voltage
415v-50c-3p
SPECIFICATIONS
• Double wall insulated front door.
• S.S 304 Interior & Exterior.
• Washing capacity of 40 racks per hr.
• Rack size to be 400 mm X 400 mm.
• hot water indicator light, suitable for operation of
incoming hot water supply.
• Built in rinse aid dispenser, door safety switch and also
with flat racks and cutlery containers.
• Heater with thermostat Control.
• Unit to be fully automatic wash and rinse cycle with
correct temperature indicators for consistent cleaning.
• Unit installed below stone top counter by I.D.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
Complete with built in drain pump and built in softener
electric booster rinse heater & electric tank heater, Six (06)
no. Glass rack, Power Cord with Plug.
SPECIAL NOTE:
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
MEIKO
ECOSTAR 430 F
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 678 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
WATER FILTER FOR GLASS WASHER
ITEM NO : SM-03A
QUANTITY: 01
SIZE
Width:
Depth:
Height:
8.04”
5.25”
7.59”
CAPACITY
9000 GALLONS
(34069 liters)
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
SPECIFICATIONS
• NSF certified scale stick.
• Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
• Include built in water shut-off valve system.
• Built in water pressure gauge.
• Shipping Weight is 6lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
TEMPERATURE:
80°F(27°C)
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
10-125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE
QC71 SINGLE-MH2
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 679 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
GLASS RACK CABINET
ITEM NO: SM-04
QUANTITY: 01
SIZE
Width:
Depth:
Height:
500mm
610 mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
½”
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
• 1.2mm thick S.S. body welded construction
• 1.2mm thick base
• Three pairs sliding tray with integral handle as per
standard glass rack
• Smooth interior walls.
• Angle rack slide as per glass washer racks.
• Unit installed below stone top counter &
mounted on Masonry plinth.
• All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 680 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SM-05
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width
Depth:
Height:
300mm
610mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
• 0.9 mm thick)
• SS 304 AISI interior and exterior.
• Rear and both side 0.9 mm thick Cladding.
• 1.2 mm thick S.S. bottom & middle shelf
• One (01) no. 1.2 mm thick door with handle &
locking arrangement.
• One (01) no. drawer with handle and locking
arrangement.
• Unit installed below stone top counter &
mounted on Masonry plinth.
• Door Handle profile to be match adjoining
equipment under counter refrigerator.
• All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 681 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SM-06
CABINET WITH WASTE BIN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
450mm
700mm
800mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
SPECIFICATIONS
•
•
•
•
•
•
•
1.2mm thick S.S. cabinet
1.2 mm front panel with handle with approx 375mm x
150mm high flap for garbage entry.
Approx 400mm x 500mm x 500mm high, 1.2mm thick
S.S. garbage can, all corners coved.
Four (4) no. 102mm dia castor two with brakes.
Unit installed below stone top counter
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 682 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
BLENDER
ITEM NO : SM-07
QUANTITY: 01
SIZE
Width:
Depth:
Height:
205mm
230 mm
510 mm
CAPACITY
2.0 liters Jar
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
•
•
ELECTRIC :
Power
0.95 KW
Voltage
220v-50c-1p
To blend, crush, grind, etc.
2 litres durable polycarbonate decanter.
Variable speed appliance with pulse.
Maximum speed: 28.000 rpm.
Heavy duty wear-resistant base.
With acoustic cover.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
mm
1.5 Liter bowl, Unit Complete with All Standard Accessories, 2 Jars
SPECIAL NOTE:
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
SAMMIC
Equivalent
TB-2000
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 683 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SM-08
COCKTAIL/BLENDER STATION W/DOUBLE
SPEED RAIL
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1200mm
625mm+sp
eed rail
750mm
approx
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
1/2"
Hot
∅
1/2"
Wast
e
∅
(2)2”
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
SPECIFICATIONS
• 1.6mm thick S.S. top.
• 50 mm high splash.
• Rear condiment fitting with S.S. garnish pan,
• Front of unit full length speed rail,
• One no. S. S. towel ring,
• S.S. bottle opener with bottle cap catcher.
• Insulted ice chest net.
• Cast aluminum plate concealed under ice chest liner.
• Bottle Holder.
• Under S.S. drawer with handle for ice storage.
• Sliding stainless steel cover.
• CFC free foamed-in-place insulation.
• 0.9mm Thick Rear & Both sides cladding.
side
of
top
1.6mm
thick
S.S.
• Right
250mmx250x200mm deep Sink , Complete with drain
fitting.
• 1.2mm thick low height Blender shelf with hole for
cord.
• One (1) Inbuilt IP-66 Clipsal make or equivalent with
switch socket to be provided for blender.
• Unit mounted on Masonry plinth.
• All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 684 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SM-11
GLASS RACK CABINET
QUANTITY: 01
SIZE
Width:
Depth:
Height:
500mm
610 mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
½”
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
• 1.2mm thick S.S. body welded construction
• 1.2mm thick base
• Three pairs sliding tray with integral handle as per
standard glass rack
• Smooth interior walls.
• Angle rack slide as per glass washer racks.
• Unit installed below stone top counter &
mounted on Masonry plinth.
• All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 685 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SM-12
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
700mm
530 mm
800 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
SPECIFICATIONS
•
•
•
•
•
Power
NA
•
Voltage
NA
•
Gas:
BTU
NA
Con.
∅
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom & middle shelves
One (01) no. 1.2 mm thick door with handle &
locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior to be match
adjoining modular equipments bottle coolers
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 686 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SM-14
BOTTLE COOLER – 3 DOOR
QUANTITY: 03
SIZE :
Width:
Depth:
Height:
1352 mm
530mm
800 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.35 k.w.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
• Unit install below Stone top Counter on plinth.
• Front black color bond with
internal S.S
Mirror Finish to be provided (Final finish to be
confirm with I.D before production)
• Switch activated Led lights as per I.D.
• Switch activated Led lights
• 304 S/S exterior and 304 BA MIRROR S/S interior
• S.S. at back and base
• Six S/S Perforated removable & adjustable shelves
• Three double glazed Argon gas door
• Bright low energy lighting, with on/off switch
• Ambient temperature 32 deg C.
• Internal Temp +4 Deg C to +10 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A
• Remote Compressor
• Rounded edge for internal chamber
• No drainage required as equipped with waste heat
recovery vaporizer
• Automatic defrost
• Anti condensation heaters fitted to door mullions
• Digital temperature controller with compressor
running indicator, defrost indicator, condensing
cleaning light, fan running indicator, high low
temperature alarm
ACCESSORIES:
SPECIAL NOTE:
IGLU
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 687 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SM-15
WINE CHILLER – RED WINE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
600mm
530mm
800mm
CAPACITY
CAP-35 BOTTLES
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.5 KW
Voltage
220-50-1
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
SPECIFICATIONS
• Unit install below Stone top Counter on plinth.
• Front black color bond with internal S.S Mirror
Finish to be provided (Final finish to be confirm
with I.D before production)
• Switch activated Led lights as per I.D.
• Refrigerated storage sections with hinged glass doors
units
• Remote compressor
• Dimpnd type wooden rack
• Ambient temperature 43 Dec C
• Suitable Internal for Red wine
• Air-cooled.
• Digital temperature display.
• Locking arrangement.
• Glass Doors.
• Forced draft cooling.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating. (For condensate water
evaporation).
• REFRIGERANT: R-134 A.
ACCESSORIES:
Power cord.
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
IGLU
WILLIAMS
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
CUSTOM BUILT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 688 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SM-16
WINE CHILLER – WHITE WINE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
600mm
530mm
800 mm
CAPACITY
CAP-35 BOTTLES
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.5 KW
Voltage
220-50-1
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
SPECIFICATIONS
• Unit install below Stone top Counter on plinth.
• Front black color bond with internal S.S Mirror
Finish to be provided (Final finish to be confirm
with I.D before production)
• Switch activated Led lights as per I.D.
• Refrigerated storage sections with hinged glass doors
units
• Remote compressor
• Dimpnd type wooden rack
• Ambient temperature 43 Dec C
• Suitable Internal for White wine
• Air-cooled.
• Digital temperature display.
• Locking arrangement.
• Glass Doors.
• Forced draft cooling.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating. (For condensate water
evaporation).
• REFRIGERANT: R-134 A.
ACCESSORIES:
Power cord.
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
IGLU
WILLIAMS
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
CUSTOM BUILT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 689 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SM-29
SOJU LIQUOR DISPLAY
QUANTITY:01
SIZE
Width:
Depth:
Height:
2200 mm
700mm
2100 mm
CAPACITY
Tentative Image
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
1.0 K.W
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
Free standing soju liquor display
LED light as per ID or Lighting Consultant.
Ultra-clear glass on the Front and rear sides.
Suitable temp. for Soju Liquor.
Anti-condensation system.
Humidity controlled.
Locking system.
Remote compressor.
Temperature Display.
Double Vacuum Glass Sliding door with frame
Glass shelving as per ID
All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D before
production)
ACCESSORIES:
Power cord
SPECIAL NOTE:
External Finish to be coordinated with ID, Shop drawing
with plan, elevation and section to be submitted for
approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER.
IGLU
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 690 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SM-30
REFRIGERATED UPRIGHT CABINET FOR KIMCHI
CELERY
Tentative Image
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
1800 mm
700 mm
2100 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.66 KW
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
304 S/S exterior/Interior
(Final finish as per I.D. pls. confirmed before production.
Ultra-clear glass on the Front and rear sides, with glass
door.
Eight (08) no. Glass shelves removable & adjustable
Remote compressor.
Lights as per I.D. (Pls. confirmed before production)
On/off switch and temperature display at bottom.
Two (02) no. glass door with handle.
Ambient temperature 32 deg C.
Suitable temp. for KIMCHI
Air-cooled.
REFRIGERANT GAS: R-134 A
Rounded edge for internal chamber
waste heat recovery vaporizer
Automatic defrost
Anti condensation heaters fitted to door mullions
Digital temperature controller with compressor running indicator,
defrost indicator, condensing cleaning light, fan running
indicator, high low temperature alarm
Four (04) no. 100mm high S.S. legs with adjustable bullet feet.
Front of legs 100mm high skirting all sides as shown
All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm by I.D before
production)
ACCESSORIES:
SPECIAL NOTE:
This item is located front of house & will be
highly visible , the finishing required must be
first class & will be required coordination with
the Interior designer/Interior contractor
IGLU
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 691 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SM-31
REFRIGERATED UPRIGHT CABINET FOR
VEGETABLES
Tentative Image
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
2400 mm
600 mm
2100 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.66 KW
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
304 S/S exterior/Interior
(Final finish as per I.D. pls. confirmed before production.
Ultra-clear glass on the Front and rear sides, with glass
door.
Eight (08) no. Glass shelves removable & adjustable
Remote compressor.
Lights as per I.D. (Pls. confirmed before production)
On/off switch and temperature display at bottom.
Four (04) no. glass door with handle.
Ambient temperature 32 deg C.
Suitable temp. for KIMCHI
Air-cooled.
REFRIGERANT GAS: R-134 A
Rounded edge for internal chamber
waste heat recovery vaporizer
Automatic defrost
Anti condensation heaters fitted to door mullions
Digital temperature controller with compressor running indicator,
defrost indicator, condensing cleaning light, fan running
indicator, high low temperature alarm
Four (04) no. 100mm high S.S. legs with adjustable bullet feet.
Front of legs 100mm high skirting all sides as shown
All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm by I.D before
production)
ACCESSORIES:
SPECIAL NOTE:
This item is located front of house & will be
highly visible , the finishing required must be
first class & will be required coordination with
the Interior designer/Interior contractor
IGLU
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 692 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SM-33
REFRIGERATED UPRIGHT DISPLAY CABINET
QUANTITY: 02
Tentative Image
SIZE :
Width:
Depth:
Height:
1500 mm
750mm
2100mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.66 KW
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
304 S/S exterior/Interior
(Final finish as per I.D. pls. confirmed before production.
S.S. at back and base with both side glasses with glass door.
Eight (08) no. Glass shelves removable & adjustable
Remote compressor.
Lights as per I.D. (Pls. confirmed before production)
On/off switch and temperature display at bottom.
Two (02) no. glass door with handle.
Ambient temperature 32 deg C.
Internal Temp +4 Deg C to +10 Deg C.
Air-cooled.
REFRIGERANT GAS: R-134 A
Rounded edge for internal chamber
waste heat recovery vaporizer
Automatic defrost
Anti condensation heaters fitted to door mullions
Digital temperature controller with compressor running indicator,
defrost indicator, condensing cleaning light, fan running
indicator, high low temperature alarm
Four (04) no. 100mm high S.S. legs with adjustable bullet feet.
Front of legs 100mm high skirting all sides as shown
All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm by I.D before
production)
ACCESSORIES:
SPECIAL NOTE:
This item is located front of house & will be
highly visible , the finishing required must be
first class & will be required coordination with
the Interior designer/Interior contractor
IGLU
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 693 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : SM-37
EXHAUST HOOD WITH FIRE SUPRESSION
SYSTEM
QUANTITY: 01
SIZE
Width
Depth
Height:
2000mm Dia
----
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.5 K.W (for
light)
Voltage
220v-50c-1p
EXHAUST
1250 CFM
GAS:
BTU
NA
Con.
∅
KIT. EQPT. SPECS
INDIA
UAE
SPECIFICATIONS
• Exhaust Hood
• External and internal parts to be manufactured in SS 304
• Fully welded joints.
• Should have removable, dishwasher washable SS grease
filters.
• Grease drain channel with grease tray.
• Appropriate of numbers of Flashed incandescent, with heat
toughened glass, LED light with IP 55 rating, diffusing glass,
to provide 500 lux of light through-out the hood
• Should have IP65 Electrical fittings
• Wiring should be in heat resistant conduits
• To be provided with adjustment Dampers
• To be suspended on ceiling with hanger rods.
• Capture Ray Ultraviolet cassette with integrated controls
and safety.
• Equipment mounted above single line cooking
battery.
•
•
Fire Suppression system
Provide an automatic, water-assisted, wet chemical, fire
suppression System with provision of manual pull station to
be located in a path of egress at a maximum height of 60
inches above the floor.Unit to be provided with nozzles for
equipment protection, plenum protection and duct
protection.Should provide 100% protection as required by
codes,
standards,
national,
state,
and
local
requirements.Provide fusible links in each exhaust duct cutout and at a maximum gap of 2 feet (610mm) between
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 694 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
ACCESSORIES:
SPECIAL NOTE:
them.Unit to be provided with water inlet which would be
connected to the fire pipe line.Stainless steel pipe drops to
be provided to the discharge nozzles and plenum both.
Discharge nozzles should not exceed 610mm from each
other.The system, including all of its components, shall be
UL Standard 300/ ULC Standard ORD-C1254.6 Listed.
Automatic actuation shall be initiated by separation of
fusible links. Fusible link break temperature should be as
per the equipment below the same.
Distance of cylinder assembly & pull down points as per lay
out plan.
Unit should be complete of Gas shut off valve, Disconnect
system for Electrical equipment, Hood light (incase of same
is in a non fire rated enclosure, Disconnect hvac system.
Accessories for installation & operation.
•
•
•
HVAC Cutouts to be coordinated with HVAC consultant.
Shop drawing with plan, elevation and section to be
submitted for approval. Fire suppression system should be
installed by a certified vendor and all testing and
commissioning certificated needs to be provided.
Minimum of five (05) years maintenance contract should be
there between the client and the fire suppression system
vendor for periodic maintenance inclusive cylinder and
accessories as per fire norms.
Detail provided in this specification in terms of number of
Nozzles, ducts cut outs , distance of unit etc. needs to be
coordinated and verified by Vendor. Any Deviation from
above mention and specification to be brought to the notice
else it is expected that the vendor in following complete
specification as mentioned above.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
HALTON+ ANSUL
KVI-R+ (P10)
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 695 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SM-38
GRAVITY SLICER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
710mm
762mm
660mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
ELECTRIC :
Power
0.35 K.W.
Voltage
220v-50c-1p
EXHAUST
•
•
NA
GAS:
BTU
NA
Con.
∅ NA
•
•
•
•
ACCESSORIES:
Motor: Knife motor is 1-speed, 1⁄2 HP totally enclosed and
permanently lubricated ball bearings, thermally protected. Table
motor is brushless DC providing three fixed speeds, 20, 40 or 60
slices per minute. Three stroke lengths in the automatic mode,
provide more slices/minute at the same speed.
Base, product table, pusher, support arm and upper housing are
constructed polymers reducing the number of seams. Gauge plate
and center plate are anodized aluminum. All controls are sealed
and located out of the drip zone.
13" (330 mm) diameter, hollow ground, hardened and polished
stainless steel.
Knife Sharpener: Removable and submersible table mounted, two
stone, dual action design to ensure correct pressure and contact
angle are always applied, thus reducing knife wear and delivering
a perfect edge. Borazon stones last longer, sharpen faster and
clean easier.
Thickness Control: Index knob controls a precision, variable pitch
barrel cam with ultra-fine adjustment in the first revolution and
opens to a thickness of 15⁄16" (34 mm) for accurate and
consistent slicing. This control is located out of the drip zone on
the upper left to provide quick and easy access for operation and
cleaning.
Product Table: Full gravity feed 45° angle with articulating rear
mounted pusher that runs the entire length of the table to secure
product for increased yield and consistency in every slice. A fence
provides stability for the product in automatic mode.
Kick Stand: An easy to use kick stand supports the slicer for easy
access to clean under the slicer.
Controls: Sealed push-button switches located on the index knob
housing out of the drip zone.
Low Fence, Product Tray
SPECIAL NOTE:
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
BERKEL
X13A-PLUS
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 696 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: SM-39
CHAR COAL PREPARATION DISPLAY
QUANTITY: 01
Tentative Image
SIZE
Width:
Depth:
Height:
Approx
1265mm Dia
------
Approx
600mm
highs
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
Unit suitably rest & drop in I.D. stone top counter
Heavy duty M.S. base
Heavy duty insulation at all sides.
Heat tank style fire box cast from durable high temperature
ceramic
Complete with ash removable pan.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
To be coordinated with ID for cut outs Shop drawing with
plan, elevation and section to be submitted for approval.
Finish to be co-ordinate with I.D
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER.
CLAY OVEN
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 697 of 1187
New Delhi
Dubai
Integrated Solution for Ho
ospitality Projec
cts
An ISO 90011:2008 Certified Com
mpany
ITEM NO:
N SM-40
0
D
DROP IN BAR –BE
E QUE GR
RILL WIT
TH
V
VENTILATIION CANO
OPY ABOV
VE DININ
NG
T
TABLE
QUANT
TITY: 22
Tentativ
ve Image
SIZE
Width:
h:
Depth
He
eight:
Approx
450mm Dia
------
Ass
ce
eiling
per
CAPACITY
M.E.P REQUIRMEN
R
NT
PLUMB
BING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTR
RIC :
Power
NA
Voltage
NA
SP
PECIFICATIIONS
•
•
•
•
nish as per I.D.) charcoal
Approxx 400mm dia M.S. (Final fin
box, su
uitable to be drop
d
in I.D. d
dining table co
omplete with
heavy duty insulatio
on & removab
ble grill,
Canopyy S.S. Constrruction.
Mounte
ed approx 450mm Above d
dining table to
op.
Exterio
or finish as pe
er I.D. (Please
e coordinate befor
b
producction)
EXHAU
UST
300 C.F.M.
GAS:
BTU
NA
Con.
∅
ACCES
SSORIES:
SPECIA
AL NOTE:
PREFER
RRRED MAK
KE AND MOD
DEL IN ALPH
HABETICAL ORDER.
O
SHINPO
O
SVSS
KIT. EQPT
T. SPECS
INDIA
UAE
JO
OARSAHARA
A DHAKA-BAN
NGLADESH
Sectoor -17, Dwarka
Dubai Airport Free Zonee
Page-- 698 of 11877
New D
Delhi
Duubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : TG-01
PIZZA OVEN
QUANTITY: 01
SIZE
Dia:
Depth:
Height:
1250mm
--mm
1730mm
CAPACITY
M.E.P REQUIREMENT
PLUMBING :
Cold
∅
1/2'”
Hot
∅
NA
Wast
e
∅
ELECTRIC :
Power
15 Amp
Voltage
220v-50c-1
EXHAUST
650 C.F.M.
GAS:
BTU
57000
Con.
∅
¾”
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Wood fired Pizza Oven with Gas Heating Back up.
The Internal cooking surface to be of dia 900mm
Unit furnished with 200mm high FLUE Collar.
Gas Control panel
Thermostat and indicators.
Capacity per hour of
70 no. of 200mm,
35 no. of 250mm,
25 no. of 300mm,
10 no. of 400mm
Stainless Oven Mouth Lintel.
With internal spotlight.
Analogue Thermometer.
Cast iron log display.
Thermal Interlock Sensor.
inch
ACCESSORIES:
Display Burner, Stainless Steel Oven Tool Set (with stainless
steel hangers), Stack-Mounted Exhaust Fan, Spray filter.
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval. Cladding details to be done by
I.D.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDER
BEECH OVEN
REC0900
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 699 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-02
UNDER COUNTER REFRIGATOR
QUANTITY: 02
SIZE:
Width:
Depth:
Height:
1035mm
675mm
700 mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Unit installed below stone top counter by
I.D on plinth.
• All visible Exterior S.S Mirror finish to be
provided (to be confirm by I.D before
production).
• 0.9mm thick S.S. top.
• SS 304 interior and exterior.
• Four (04) no S.S Drawer with removable 1/1
G.N pans insulation.
• With Levelers.
• Ambient temperature 43 deg C.
• Internal Temp 0 Deg C to 4 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A.
• Remote Compressor Housing.
• Digital read out thermometer, cord with time
delay auto start.
• Forced draft cooling.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating.(for condensate water
evaporation),
• Unit construction to be as per V cut Bending.
Power cord.
Cold
∅
NA
Hot
∅
NA
Wast ∅
e
NA
ELECTRIC :
Power
0.35 k.w.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
•
Shop drawing with plan, elevation and section
to be submitted for approval.
IGLU
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 700 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-02A
SALADETTE UNIT
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
980 mm
375 mm
241 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.25 H.P.
Voltage
220v.50c.1p.
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
• Table top
• 304 S/S interior and exterior
• 304 S/S at back
• S.S. 304 steel at base
• With hinged lid
• Accommodates Eight (08) 1/61 GN Pans
• Fitted with thermometer
• Adjustable thermostat
• Designed for 43°C Ambient Temperature
• Internal Temp +1 Deg C to +4 Deg C
• Copper tube cooling
• REFRIGERANT GAS: R-134 A
• Condensing unit aside
• Rounded edge for internal chamber
• Manual defrost
• Fitted with thermometer
•
All visible Exterior S.S Mirror finish to be
provided (to be confirm by I.D before
production)
ACCESSORIES:
SPECIAL NOTE:
WILLIAMS
IGLU
TW 9
equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 701 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-03
UNDER COUNTER REFRIGERATOR
QUANTITY: 03
SIZE:
Width:
Depth:
Height:
1550mm
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.45 k.w.
Voltage
220v-50c-1p.
Gas:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Unit installed below stone top counter by I.D
on plinth.
• All visible Exterior S.S Mirror finish to be
provided (to be confirm by I.D before
production)
• 0.9mm thick S.S. top.
• SS 304 interior and exterior.
• Six (6)no S.S Drawer with removable 1/1 G.N pans
insulation.
• With Levelers.
• Ambient temperature 43 deg C.
• Internal Temp 0 Deg C to 4 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A.
• Remote Compressor Housing.
• Digital read out thermometer, cord with time delay
auto start.
• Forced draft cooling.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating.(for condensate water
evaporation),
• Unit construction to be as per V cut Bending.
Power cord.
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
IGLU
WILLIAMS
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
CUSTOM BUILT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 702 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : TG-04
DROP IN REFRIGERATED ICE WELL
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1100mm(Int
ernal)
450mm(Inter
nal)
125mm
(Internal)
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
1”
SPECIFICATIONS
•
•
•
•
•
ELECTRIC :
Power
0.25 H.P.
Voltage
220v-50c-1ph.
•
•
Unit drop in I.D. stone top counter .
Lights as per I.D or Lighting Consultant.
Internal size Approx 1100mm x 450mm D x 125 High
1.2 mm thick cold pan with insulation and at all sides &
Drain outlet. .
Provide light arrangement , Led light all four sides in side
body. (Light as per I.D.)
Remote compressor
1.2mm thick S.S. perforated false bottom.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
Power cord
SPECIAL NOTE:
To be coordinated with ID for cut outs Shop drawing with
plan, elevation and section to be submitted for approval.
Finish to be co-ordinate with I.D
IGLU
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 703 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-05
DROP IN HAND WASH SINK
QUANTITY: 01
Tentative Image
SIZE
Width
Depth:
Height:
385mm
385mm
180mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Wast
e
∅
1½”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
•
•
•
•
•
•
Equipment drop in I.D. Stone top Counter.
1.2 mm thick S.S. sink.
One (1) TEKA make Sink Size is 385 mm dia X 180
mm deep model is BE39.18 with Drain Fitting to be
provided.
Deck Mounted Sensor Operated Faucet: - Make is
TOTO and Model no is TS-191.
(1) Soap Dispenser Make is PONGCHAI and model is
402073.
Top visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
AS PER ABOVE SPECS
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 704 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-06
CABINET WITH WASTE BIN
QUANTITY: 02
SIZE
Width:
Depth:
Height:
500mm
700mm
800mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
SPECIFICATIONS
•
•
•
•
•
•
•
1.2mm thick S.S. cabinet
1.2 mm front panel with handle with approx 400mm x
150mm high flap for garbage entry.
Approx 450mm x 500mm x 500mm high, 1.2mm thick
S.S. garbage can, all corners coved.
Four (4) no. 102mm dia castor two with brakes.
Unit installed below stone top counter
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 705 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-07
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1850mm
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Gas:
SPECIFICATIONS
•
•
•
•
•
•
•
•
BTU
NA
Con.
∅
•
Shape as per layout plan
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom shelf
Top of unit provide cut out as per modular
equipment drop in ice well.
Four (04) no. 1.2 mm thick door with handle &
locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 706 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-07A
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1700 mm
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
•
•
•
•
•
•
•
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom shelf & middle shelf
Three (03) no. 1.2 mm thick door with handle &
locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 707 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-08
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
850 mm
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
•
•
•
•
•
•
•
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom shelf & middle shelf
Two (02) no. 1.2 mm thick door with handle &
locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 708 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-09
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width:
1300 mm
Depth:
Height:
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
•
•
•
•
•
•
•
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom shelf & middle shelf
Three (03) no. 1.2 mm thick door with handle &
locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 709 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-10
RETRACTABLE HEATED LAMP
QUANTITY: 03
SIZE
Dia:
Depth:
267 mm
--
CAPACITY
Height:
990 to
1765 mm
250 Watt
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast ∅
e
NA
SPECIFICATIONS
•
•
•
•
•
•
Lamp bulb heating rated of 250 watt each.
Adjustable Cord.
Remote Operated Switch.
Cord length Adjustable from 39” to 69 -½”.
Bulb Colour to be confirmed by I.D.
Outer finish to be confirmed by I.D.
ELECTRIC :
Power
0.25 KW.
Voltage
220v-50c1p.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅ NA
ACCESSORIES:
Accessories for installation and operation.
SPECIAL NOTE:
Outer shade to be Confirmed by I.D.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER.
HATCO
DLH-775-RL
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 710 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : TG-11
SINGLE TOP COOKING BATTERY
QUANTITY: 01
SIZE
Width:
Depth:
Height:
2550mm
1500mm
900mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
SPECIFICATIONS
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
Custom built, Single top installation constructed of S.S. finish
heavy duty 3.0mm thick work top, Complete with S.s. heavy
duty S.S. fame work & base plinth with all sides S.S. heavy
duty kick plate.
ITEM #TG-11A GRIDDLE PLATE (GAS OPERATED)
ELECTRIC :
Power
12.35 K.W.
Voltage
440v.50c.3ph.
EXHAUST
NA
GAS:
BTU
176,000
Con.
∅
¾”
1xGas fry top, Approx 440mm wide x 560mm cooking surface,
smooth and open hygienic base steel cooking surface with
18mm thick bottom plate. The smooth plate with a flat
cooking surface slightly sloped towards the removable drip
tray. Thermostatically controlled stainless steel burners.
Burner to be protected by a flame failure device. Unit to be
equipped with piezo ignition and an indicator lamp which
shows when it is ready for use. Base compartment with large
round edges.. One no. plate scraper with brush, Bottom of
unit provide Hinged shutter with handle. Gas BTU: 23900.
ITEM #TG-11B TWIN TANK DEEP FAT FRYER ,
(ELECTRICAL OPERATED)
2 X 12.5 Ltrs. Electric Fryer, independently controlled Vshaped, pressed wells with rounded corners and expansion
zone at the top. Thermostatic regulation of the oil
temperature up to max. 185°C. Oil cleaning device located in
the compartment below the wells. With water resistant, With
Tilting type heating elements, Supplied with 2 no frying
baskets with insulated handles, 2 no lids, Oil clarifying tray,
Oil receptacle and 2 no basket rest grids, Bottom of unit
provide Hinged shutter with handle Total electrical power:
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 711 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
12.0 k.w.
ITEM #TG-11C LAVA STONE GRILL,(GAS OPERATED)
Approx 320mm x 510mm Cooking lava stone grill surface, one
(01) zones, Grid grill halved and adjustable in heights,
Complete with atmospheric burner, Ignition burner ,
Thermoelectric safeguard, piezoelectric ignition for each zone
and gas top. Complete with Grill grid, Bottom of unit provide
Hinged shutter with handle. Gas BTU: 27320.
ITEM #TG-11D SINK UNIT
1.6 mm thick S.S. Sing approx 375mm dia x 200mm high ,
Complete with drain fitting & water faucet.
ITEM #TG-11E UNDER COUNTER REFRIGATOR,
SS 304 interior and exterior. Four (04) no S.S Drawer with
removable 1/1 G.N pans insulation. With Levelers. Ambient
temperature 43 deg C. Internal Temp 0 Deg C to 4 Deg C.
Air-cooled. REFRIGERANT GAS: R-134 A. Remote Compressor
Housing. Digital read out thermometer, cord with time delay
auto start. Forced draft cooling. 50mm thick P.U. foam on all
sides. Drip tray with heating.(for condensate water
evaporation), Unit construction to be as per V cut Bending.
Electric power-0.35 k.w. & voltage-220.50C
ITEM #TG-11F FOUR BURNER RANGE W/OVEN (GAS
OPERATED)
1x4-Burner, Cast iron pan support, with long center fins.
Removable pan supports, burner rings and flame ignition
components. Manual gas valves with fixed high and low
positions. Gas main valve to be built in. With Flame failure
device, Piezo Ignition, Inbuilt pressure control regulator,
Bottom of unit provide Hinged shutter with handle. Gas BTU:
125,000.
ITEM #TG-11G OVERHEAD SHELF
Approx 2400mm x 375mm S.S. pipe shelf, Mounted at 535m
m Above working top.
AMBIENT TOPS
Balance work area as shown in lay out plan between two
equipments provide below S.S. hinged door with handle.
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 712 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ACCESSORIES:
Stainless steel end panels, 1xTechnical compartment for
electrical, 1xMechanical compartment for elect. & plumbing,
All Control Knob to be S.S and All Doors S.S handle.
SPECIAL NOTE:
Colors as per I.D. , Shop drawing with plan, elevation
and section to be submitted for approval and I.D.
coordination.
MKN
KUTCHEN MEISTER
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 713 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-12
EXHAUST HOOD WITH UV GREASE
REMOVAL COMPLETE WITH DEMAND
CONTROL VENTILATION & FIRE
SUPRESSION SYSTEM
QUANTITY: 01
SIZE
Width
Depth
Height:
2850mm
2400mm
555mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅ NA
Wast
e
∅ NA
SPECIFICATIONS
•
•
ELECTRIC :
Power
1.0.W (for
light)
Voltage
220v-50c-1p
EXHAUST
•
4218 CFM
GAS:
BTU
NA
•
Con.
∅
•
•
KIT. EQPT. SPECS
INDIA
UAE
The kitchen canopy shall be constructed from 1.0 mm
AISI 304 stainless steel and shall be supplied complete
with grease filters (UL listed), pressure measurement
taps, exhaust adjustment systems. The canopy shall
be HACCP certified.
The system to include lightweight stainless steel UV
lamps cassettes, directly integrated in the exhaust
plenum, behind the double stage mechanical filtration.
Cassettes should be easily removable by disconnecting
the electrical connectors.
Outer casing panels to be constructed from AISI 304
stainless steel in a brushed satin finish, in a modular
Construction. The joints of the lower edge shall be
fully welded to be liquid-tight, avoiding harmful
dripping of condensation. All exposed welds should be
ground and polished to the metal’s original finish.
The bottom edge of the exhaust plenum should be
aerodynamically designed (no flat surface).
Canopy ends shall be of double-sidewall construction.
Exhaust
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 714 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
•
•
•
•
•
•
KIT. EQPT. SPECS
INDIA
UAE
The exhaust air flow will be based on the convective
heat generated by the appliances under each canopy.
Submittal shall include convective heat calculations
based on the input power of the appliances served.
Grease filters
The canopy shall be equipped with a stainless steel
grease filter. The grease removal efficiency should be
95% for particles a diameter of 10 microns or larger.
The filter shall be NSF and UL classified. Baffle or slot
type grease filters shall not be used.
Exhaust Balancing dampers
Every spigot connections for extracted air shall be
supplied with an automated motorized balancing
damper. The damper shall automatically adjust
exhaust airflow based on direct pressure readings
from integral T.A.B test and balance port in the hood.
The Model ABD will have night time setback feature
which will automatically close the damper when the
exhaust system is shut down to prevent outside air
from migrating into the space. The Model ABD should
fail safe open on power interruption.
The damper outer casing shall be constructed of
continuously welded 1.2mm thick S.S.including the
balancing blades. Adjustment of the parallel dampers
(in open position) will be achieved by manually turning
the locking adjustment bracket until the desired
pressure reading is achieved.
Light Fixtures
Each canopy shall be provided with a LED light fixture
to provide approx. 500 lux at the cooking appliances
work surface. The light is protected with a stainless
steel hatch with plain milled finish, surrounded by a
tempered-glass light diffuser (the heat tolerance of the
glass shall be -40 to 300 °C).
Demand Control Ventilation
The system to come equipped with hood mounted
infrared cooking activity sensors capable of measuring
appliance surface temperatures. Infrared sensor will
read appliance surface temperature which will be
translated by the specific calculation algorithm for that
appliance and will respond proactively to any change
in cooking status. Infrared sensor and exhaust collar
mounted temperature sensor work in concert on
differential temperature reading back to the controller.
The system shall automatically control the speed of
the exhaust fan (and supply fan if applicable) based
on appliances status, cooking activities and exhaust air
temperatures. The system can be controlled with
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 715 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
•
•
•
•
either manual On/Off switch, a 24hrs automated
schedule with a manual override function, or the
hoods can be automatically regulated based on the
appliance status. The integrated PLC will analyze
signals from the cooking activity sensors, temperature
sensors and pressure transducers mounted in the
hood and then send a signal to the VFD(to be
provided by HVAC contractor) to adjust the exhaust
fan (and supply fan if applicable) speed to satisfy
current cooking load conditions, as well adjust the
automated balancing dampers accordingly. The
system can be monitored and controlled with an
internet connected PC from either a local or remote
location.
Fire Suppression system
Provide an automatic, water-assisted, wet chemical,
fire suppression System with provision of manual pull
station to be located in a path of egress at a maximum
height of 60 inches above the floor. Unit to be
provided with nozzles for equipment protection,
plenum protection and duct protection. Should provide
100% protection as required by codes, standards,
national, state, and local requirements. Provide fusible
links in each exhaust duct cut-out and at a maximum
gap of 2 feet (610mm) between them.Unit to be
provided with water inlet which would be connected to
the fire pipe line. Stainless steel pipe drops to be
provided to the discharge nozzles and plenum both.
Discharge nozzles should not exceed 610mm from
each other. The system, including all of its
components, shall be UL Standard 300/ ULC Standard
ORD-C1254.6 Listed. Automatic actuation shall be
initiated by separation of fusible links. Fusible link
break temperature should be as per the equipment
below the same.
Distance of cylinder assembly & pull down points as
per lay out plan.
Unit should be complete of Gas shut off valve,
Disconnect system for Electrical equipment, Hood light
(incase of same is in a non fire rated enclosure,
Disconnect hvac system.
ACCESSORIES:
Standard accessories for installation, operations and
maintenance to be provided.
SAFETY NORMS:
UV access door closing and filters presence shall be
permanently controlled with maintenance free magnetic
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 716 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
proximity switches (automatic and immediate UV lamps
switch off).
• Each UV canopy section is equipped with a plug and play UV
module, integrated behind the light casing, ease of access
using the light hatch. Each UV module shall communicate with
a UV control panel, integrated in one of the canopy section.
The control panel displays warnings or
potential working defaults and shall be able to identify on
which canopy section where they occur and, if needed, which
ballast or lamps are concerned.
SPECIAL NOTE:
•
•
•
Fire suppression system should be installed by a certified vendor
and all testing and commissioning certificated needs to be
provided.
Minimum of five (05) years maintenance contract should be there
between the client and the fire suppression system vendor for
periodic maintenance inclusive cylinder and accessories as per fire
norms.
Detail provided in this specification in terms of number of Nozzles,
ducts cut outs , distance of unit etc. needs to be coordinated and
verified by Vendor. Any Deviation from above mention and
specification to be brought to the notice else it is expected that the
vendor in following complete specification as mentioned above.
HVAC Cutouts and fresh air cutouts to be coordinated with HVAC consultant. Shop drawing
with plan, elevation and section to be submitted for approval.
HALTON+ANSUL
UVI+ MARVEL+(P10+P10)
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 717 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-13
CABINET WITH WASTE BIN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
500mm
600mm
800mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
SPECIFICATIONS
•
•
•
•
•
•
•
1.2mm thick S.S. cabinet
1.2 mm front panel with handle with approx 400mm x
150mm high flap for garbage entry.
Approx 450mm x 500mm x 500mm high, 1.2mm thick
S.S. garbage can, all corners coved.
Four (4) no. 102mm dia castor two with brakes.
Unit installed below stone top counter
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 718 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-14
UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE:
Width:
Depth:
Height:
1550mm
600mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.45 k.w.
Voltage
220v-50c-1p.
Gas:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Unit installed below stone top counter by I.D
on plinth.
• All visible Exterior S.S Mirror finish to be
provided (to be confirm by I.D before
production)
• 0.9mm thick S.S. top.
• SS 304 interior and exterior.
• Six (6)no S.S Drawer with insulation.
• With Levelers.
• Ambient temperature 43 deg C.
• Internal Temp 0 Deg C to 4 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A.
• Remote Compressor Housing.
• Digital read out thermometer, cord with time delay
auto start.
• Forced draft cooling.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating.(for condensate water
evaporation),
• Unit construction to be as per V cut Bending.
Power cord.
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
IGLU
WILLIAMS
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
CUSTOM BUILT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 719 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-15
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
Approx 2500
450mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
Gas:
•
•
BTU
NA
•
Con.
∅
•
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. full width bottom & part middle
shelves.
Top unit provide cut out as per Drop in modular
equipment, drop in heated stone top & drop in hand
wash sink.
Six (06) no. 1.2 mm thick door with handle &
locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 720 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-16
RETRACTABLE HEATED LAMP
QUANTITY: 03
SIZE
Dia:
Depth:
267 mm
--
CAPACITY
Height:
990 to
1765 mm
250 Watt
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast ∅
e
NA
SPECIFICATIONS
•
•
•
•
•
•
Lamp bulb heating rated of 250 watt each.
Adjustable Cord.
Remote Operated Switch.
Cord length Adjustable from 39” to 69 -½”.
Bulb Colour to be confirmed by I.D.
Outer finish to be confirmed by I.D.
ELECTRIC :
Power
0.25 KW.
Voltage
220v-50c1p.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅ NA
ACCESSORIES:
Accessories for installation and operation.
SPECIAL NOTE:
Outer shade to be Confirmed by I.D.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER.
HATCO
DLH-775-RL
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 721 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-16A
DROP IN HEATED STONE TOP
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1219 mm
498 mm
57 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
1.27 KW
Voltage
220v.50c.1p.
SPECIFICATIONS
• Drop in Unit.
• Bermuda sand color of stone.
• Stone top to be approved food safe material.
• Thermostatically-controlled heated base.
• Temperatures Range from 100°C to 200°C to be
maintained at 29˚C ambient room temperature.
• Flush Mount Electronic Control Box with Lighted
On/Off Rocker Switch.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
To be coordinated with ID for cut outs.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER.
HATCO
GRSSB-4818
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 722 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : TG-17
VERTICAL REFRIGERATOR
QUANTITY: 02
SIZE :
Width:
Depth:
Height:
750 mm
700mm
1950 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.65 KW
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
304 S/S exterior/Interior
(Final finish as per I.D. pls. confirmed before production.
S.S. at back and base with both side glass with glass door.
Four (04) no. Glass shelves removable & adjustable
Remote compressor.
Lights as per I.D. (Pls. confirmed before production)
On/off switch and temperature display at bottom.
One (01) no. glass door with handle. (One no. left hinged and
one no. right hinged.
Ambient temperature 32 deg C.
Internal Temp +4 Deg C to +10 Deg C.
Air-cooled.
REFRIGERANT GAS: R-134 A
Rounded edge for internal chamber
waste heat recovery vaporizer
Automatic defrost
Anti condensation heaters fitted to door mullions
Digital temperature controller with compressor running indicator,
defrost indicator, condensing cleaning light, fan running
indicator, high low temperature alarm
Four (04) no. 100mm high S.S. legs with adjustable bullet feet.
Front of legs 100mm high skirting all sides as shown
All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm by I.D before
production)
ACCESSORIES:
SPECIAL NOTE:
This item is located front of house & will be
highly visible , the finishing required must be
first class & will be required coordination with
the Interior designer/Interior contractor
IGLU
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 723 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-18
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
Approx 400
700mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
•
•
•
•
•
•
•
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom shelf & middle shelf
One (01) no. 1.2 mm thick door with handle &
locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 724 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-19
SEMI AUTOMATIC COFFEE MACHINE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1000mm
530mm
520 mm
CAPACITY
THREE (03) GROUP
M.E.P REQUIREMENT
PLUMBING :
Cold
∅
3/8"
Hot
∅
NA
Wast
e
∅
1"
ELECTRIC :
Power
6.5 KW
Voltage
415v-50c-3p
EXHAUST
SPECIFICATIONS
• Semi-automatic.
• S.S 304 Exterior.
• With Water softener
• Semi- automatic cleaning system & pump.
• Boiler capacity 15 Litres.
• Steam wands Three (03).
• Hot water wands One (1).
• Auto steam
• Electrical cup warmer
• Knock out Drawer
• Tamper
• Tamping machine
NA
GAS:
BTU
NA
Con.
∅
mm
ACCESSORIES:
Power cord with plug.
SPECIAL NOTE:
Color To be coordinated with ID
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDER.
FRANKE
LA-CIMBALI
T400-3 GROUPS
KIT. EQPT. SPECS
INDIA
UAE
EQUIVLANT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 725 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-19A
COFFEE GRINDER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
160 mm
200 mm
462 mm
CAPACITY
10-15 LBS/HR.
M.E.P REQUIREMENT
PLUMBING :
SPECIFICATIONS
•
Grinder blade speed: 1600 RPM
Cold
∅
3/8"
•
Bean Hopper Capacity: 1.3 LBS
Hot
∅
NA
•
Grinder Burrs Dia: 50 mm
Wast
e
∅
1"
•
Feature cast metal bodies built with durable, high
capacity bean.
•
Hoppers for heavy use
•
Allow quick, precise finitely adjustable grind
adjustments
•
Include large capacity dozers with customizable
dosing capability
•
Have an unparalleled track record for performance in
U.S. espresso operations
ELECTRIC :
Power
0.25 HP
Voltage
220v-50c-1p
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
mm
ACCESSORIES:
Power cord with plug.
SPECIAL NOTE:
Color To be coordinated with ID
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDER.
FRANKE
LA-CIMBALI
MINI
KIT. EQPT. SPECS
INDIA
UAE
EQUIVLANT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 726 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-19B
CLARIS HEAD & CARTRIDGE M
COFFEE MACHINE WITH GRINDER
FOR
QUANTITY: 01
SIZE
Width:
Depth:
Height:
3.31”
4.68”
5.78”
CAPACITY
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
TEMPERATURE:
39 - 86°F(4-30°C)
SERVICE FLOW RATE:
MAX. 0.5 GPM
PRESSURE
REQUIREMENTS:
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Built in Flush Port.
Auto shut-off.
Adjustable by-pass.
Flow restrictor.
Backflow restrictor.
CLARIS CARTRIDGE MEDIUM SIZE TO BE INSTALLED.
H: 15.43” AND W: 3.74”
MICRON RATING:- 5.00
Features include:Chlorine reduction
Ion exchange
Particulate reduction
Prefiltration
Scale control
Taste & odor
Water softening/Conditioning.
DO NOT USE TREAT CONDENSATE COOLING WATER.
29-116 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE CLARIS HEAD
EV-4339-21 & EV-4339-11
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 727 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-20
STORE ROOM SHELVING- BAR STORE
QUANTITY: 03
SIZE
WIDTH:
DEPTH:
HEIGHT:
1060MM
600 MM
2000 MM
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
cold
∅
NA
hot
∅
NA
waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
GAS:
BTU
NA
CON.
∅
SPECIFICATIONS
• Corrosion Proof Polymer Mats With Natural Finish
• Total five (05) no. shelves..
• Polymer Mat With Exclusive Built In Antimicrobial Product
Protection
• S.S Uprights.
• Edge Reinforced Nylon.
• With Corner Hooks
• Hanging Rails
• Shelf Support.
• Maximum Load 600 Kg Per Field.
• Adjustable Shelves
• With Adjustable S.S Feet.
• Shelving To Be Installed As Continuous Length With Common
Uprights With Maximum Distance Of 1050 Mm.
ACCESSORIES:
SPECIAL NOTE:
Space saving common use of uprights between 2 shelving units
possible, depending upon site / space conditions. The sizes and
number can verify as per the final plan of the store.
CAMBRO
HUPFER
METRO
CAMSHELVING
NORM 12
METROMAXQ
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 728 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-21
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
500mm
600mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
•
•
•
•
•
•
•
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom shelf & middle shelf
Two (02) no. 1.2 mm thick door with handle &
locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 729 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : TG-22A
COUNTER CABINET FOR BEER
CHILLER/KEGS
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1200mm
600 mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Gas:
SPECIFICATIONS
•
•
•
•
•
•
•
BTU
NA
Con.
∅
•
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom shelf
Two (02) no. 1.2 mm thick door with handle &
locking arrangement.
Door location size, cabinet size please verify /
Coordinated with Beer vendor before equipment
production
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to
be provided (Final finish to be confirm with
I.D before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 730 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-23
COCKTAIL/BLENDER STATION W/DOUBLE
SPEED RAIL
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1200mm
610mm+sp
eed rail
750mm
approx
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
1/2"
Hot
∅
1/2"
Wast
e
∅
(2)2”
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
SPECIFICATIONS
• 1.6mm thick S.S. top.
• 50 mm high splash.
• Rear condiment fitting with S.S. garnish pan,
• Front of unit full length speed rail,
• One no. S. S. towel ring,
• S.S. bottle opener with bottle cap catcher.
• Insulted ice chest net.
• Cast aluminum plate concealed under ice chest liner.
• Bottle Holder.
• Under S.S. drawer with handle for ice storage.
• Sliding stainless steel cover.
• CFC free foamed-in-place insulation.
• 0.9mm Thick Rear & Both sides cladding.
side
of
top
1.6mm
thick
S.S.
• Right
250mmx250x200mm deep Sink , Complete with drain
fitting.
• 1.2mm thick low height Blender shelf with hole for
cord.
• One (1) Inbuilt IP-66 Clipsal make or equivalent with
switch socket to be provided for blender.
• Unit mounted on Masonry plinth.
• All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 731 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : TG-26
BLENDER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
205mm
230 mm
510 mm
CAPACITY
2.0 liters Jar
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
•
•
ELECTRIC :
Power
0.95 KW
Voltage
220V-50C-1P
To blend, crush, grind, etc.
2 litres durable polycarbonate decanter.
Variable speed appliance with pulse.
Maximum speed: 28.000 rpm.
Heavy duty wear-resistant base.
With acoustic cover.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
mm
1.5 Liter bowl, Unit Complete with All Standard Accessories, 2 Jars
SPECIAL NOTE:
SAMMIC
Equivalent
TB-2000
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 732 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-27
CABINET WITH WASTE BIN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
500mm
600mm
800mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
SPECIFICATIONS
•
•
•
•
•
•
•
1.2mm thick S.S. cabinet
1.2 mm front panel with handle with approx 400mm x
150mm high flap for garbage entry.
Approx 450mm x 500mm x 500mm high, 1.2mm thick
S.S. garbage can, all corners coved.
Four (4) no. 102mm dia castor two with brakes.
Unit installed below stone top counter
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 733 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-28
GLASS RACK CABINET
QUANTITY: 01
SIZE
Width:
Depth:
Height:
500mm
600 mm
700 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
½”
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
• 1.2mm thick S.S. body welded construction
• 1.2mm thick base
• Three pairs sliding tray with integral handle as per
standard glass rack
• Smooth interior walls.
• Unit installed below stone top counter &
mounted on Masonry plinth.
• All front/ visible Exterior S.S Mirror finish to be
provided (Final finish to be confirm with I.D
before production)
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 734 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-29
GLASS WASHER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
460 mm.
575 mm.
700 mm.
CAPACITY
40 rack/hr
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
¾”(purif
ied)
Hot
∅
¾”
Wast
e
∅
2”
ELECTRIC :
Power
3.5 K.W
Voltage
415v-50c-3p
SPECIFICATIONS
• Double wall insulated front door.
• S.S 304 Interior & Exterior.
• Washing capacity of 40 racks per hr.
• Rack size to be 400 mm X 400 mm.
• hot water indicator light, suitable for operation of
incoming hot water supply.
• Built in rinse aid dispenser, door safety switch and also
with flat racks and cutlery containers.
• Heater with thermostat Control.
• Unit to be fully automatic wash and rinse cycle with
correct temperature indicators for consistent cleaning.
• Unit installed below stone top counter by I.D.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
Complete with built in drain pump and built in softener
electric booster rinse heater & electric tank heater, Six (06)
no. Glass rack, Power Cord with Plug.
SPECIAL NOTE:
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
MEIKO
ECOSTAR 430 F
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 735 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : TG-29A
WATER FILTER FOR GLASS WASHER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
8.04”
5.25”
7.59”
CAPACITY
9000 GALLONS
(34069 liters)
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
SPECIFICATIONS
• NSF certified scale stick.
• Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
• Include built in water shut-off valve system.
• Built in water pressure gauge.
• Shipping Weight is 6lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
TEMPERATURE:
80°F(27°C)
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
10-125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE
QC71 SINGLE-MH2
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 736 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-30
CABINET WITH STORAGE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1400mm
700mm
800 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
SPECIFICATIONS
•
•
•
•
•
Power
NA
•
Voltage
NA
•
Gas:
BTU
NA
Con.
∅
0.9mm thick top SS 304 AISI interior and exterior.
Rear and both side 0.9 mm thick Cladding.
1.2 mm thick S.S. bottom & middle shelves
Three (03) no. 1.2 mm thick door with handle &
locking arrangement.
Unit installed below stone top counter &
mounted on Masonry plinth.
Door Handle profile to be match adjoining
equipment
All front/ visible Exterior to be match
adjoining modular equipments bottle coolers
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 737 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-31
WINE CHILLER – RED WINE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
600mm
530mm
800mm
CAPACITY
CAP-35 BOTTLES
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.5 KW
Voltage
220-50-1
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
SPECIFICATIONS
• Unit install below Stone top Counter on plinth.
• Front black color bond with internal S.S Mirror
Finish to be provided (Final finish to be confirm
with I.D before production)
• Switch activated Led lights as per I.D.
• Refrigerated storage sections with hinged glass doors
units
• Compressor housing below as shown.
• Dimpnd type wooden rack
• Ambient temperature 43 Dec C
• Suitable Internal for Red wine
• Air-cooled.
• Digital temperature display.
• Locking arrangement.
• Glass Doors.
• Forced draft cooling.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating. (For condensate water
evaporation).
• REFRIGERANT: R-134 A.
ACCESSORIES:
Power cord.
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
IGLU
WILLIAMS
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
CUSTOM BUILT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 738 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-31A
WINE CHILLER – WHITE WINE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
600mm
530mm
800mm
CAPACITY
CAP-35 BOTTLES
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.5 KW
Voltage
220-50-1
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
SPECIFICATIONS
• Unit install below Stone top Counter on plinth.
• Front black color bond with internal S.S Mirror
Finish to be provided (Final finish to be confirm
with I.D before production)
• Switch activated Led lights as per I.D.
• Refrigerated storage sections with hinged glass doors
units
• Compressor housing below as shown.
• Dimpnd type wooden rack
• Ambient temperature 43 Dec C
• Suitable Internal for White wine
• Air-cooled.
• Digital temperature display.
• Locking arrangement.
• Glass Doors.
• Forced draft cooling.
• 50mm thick P.U. foam on all sides.
• Drip tray with heating. (For condensate water
evaporation).
• REFRIGERANT: R-134 A.
ACCESSORIES:
Power cord.
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
IGLU
WILLIAMS
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
CUSTOM BUILT
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 739 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-32
BOTTLE COOLER – 3 DOOR
QUANTITY: 02
SIZE :
Width:
Depth:
Height:
1352 mm
530mm
800 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.35 k.w.
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
• Unit install below Stone top Counter on plinth.
• Front black color bond with
internal S.S
Mirror Finish to be provided (Final finish to be
confirm with I.D before production)
• Switch activated Led lights as per I.D.
• Switch activated Led lights
• 304 S/S exterior and 304 BA MIRROR S/S interior
• S.S. at back and base
• Six S/S Perforated removable & adjustable shelves
• Three double glazed Argon gas door
• Bright low energy lighting, with on/off switch
• Ambient temperature 32 deg C.
• Internal Temp +4 Deg C to +10 Deg C.
• Air-cooled.
• REFRIGERANT GAS: R-134 A
• Remote Compressor
• Rounded edge for internal chamber
• No drainage required as equipped with waste heat
recovery vaporizer
• Automatic defrost
• Anti condensation heaters fitted to door mullions
• Digital temperature controller with compressor
running indicator, defrost indicator, condensing
cleaning light, fan running indicator, high low
temperature alarm
ACCESSORIES:
SPECIAL NOTE:
IGLU
WILLIAMS
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 740 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-33
AMBIENT DISPLAY SHOW CASE
QUANTITY: 01
SIZE
Width:
Depth:
1125 mm
1100 mm
Height:
1200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
SPECIFICATIONS
Cold
∅
NA
mm
Hot
∅
NA
mm
Waste
∅
NA
mm
•
•
•
•
•
ELECTRIC :
Power
0.25 K.W.
Voltage
220v-50c-1p
0.9mm thick SS 304 Body.
Clear 530mm high glass display
Double layer ultra clear toughened heated film glass
sliding shutter.
Frosted ultra clear bottom base.
One (01) Frosted ultra clear glass shelf.
All interiors to be of S.S.
Light arrangement as per ID or Lighting Consultant.
As shown front & right side stone cladding ( Stone
color as per I.D,)
All visible Exterior S.S Mirror finish to be provided
(to be confirm by I.D before production).
•
•
•
Gas:
•
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
•
This item is located front of house & will be highly visible ,
the finishing required must be first class & will be required
coordination with the Interior designer. Equipment finishes,
lights as per I.D.
WILLIAMS
IGLU
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 741 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ICE CUBE MACHINE
ITEM NO: TG-35
QUANTITY: 01
SIZE
Width:
Depth:
Height:
550 mm
550 mm
CAPACITY
50 kg per day
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
3/8”
(Purified
)
Hot
∅
NA
Wast
e
∅
¾”
ELECTRIC :
Power
0.5 K.W
Voltage
220-50-1
800 mm.
SPECIFICATIONS
• Up to 50 K.G. daily ice productions.
• Air cooled.
• Unit should be able to work in ambient temperature of
4o C to 43o C.
• Unit with automatic cleaning system.
• Removable water distribution tube with no tools.
• 20 K.G bin Capacity.
• With cove corners.
• Patented cleaning and.
• With Levelers.
• With antimicrobial.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
mm
Bin with internal scoop holder, Scoop.
SPECIAL NOTE:
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
MANITOWOC
SCOTSMAN BAR LINE
EC S050A
KIT. EQPT. SPECS
INDIA
UAE
BL 55
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 742 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: TG-35A
WATER FILTER FOR ICE CUBER
QUANTITY: 01
SIZE
Width:
Depth:
205mm
134mm
Height:
193mm
CAPACITY
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
SPECIFICATIONS
•
•
•
•
•
•
NSF certified scale stick.
Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
Include built in water shut-off valve system.
Built in water pressure gauge.
Shipping Weight is 6lbs.
DO NOT USE TREAT CONDENSATE COOLING WATER.
TEMPERATURE:
100°F
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDER
EVERPURE
QC71 SINGLE-MH2
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 743 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-01
WORK TABLE WITH UNDER SPACE FOR
UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
3050 mm
800 mm
865mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
EXHAUST
2.0mm thick S.S. Top.
150mm High Rear & Left splash.
Top secured to 12/25mm x 75mm x 25/12mm x 2.0 mm Thick S.S.
hat type welded channel frame work.
Six (06) no. 38mm x 38mm x 1.2 mm thick S.S. square pipe. legs.
With adjustable bullet feet.
Right side of unit provided space for modular under counter
refrigerator.
Provide left side balance space provide 1.2mm thick part bottom
and middle shelf.
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 744 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-02
CEILING HUNG 2 TIER SHELVES
QUANTITY: 01
SIZE
Width:
Depth:
Height:
3050 mm
300 mm
300mm
+1000mm
rod
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
1.2mm thick S.S. shelves.
Front turned down 40mm & in 12mm, Rear & both sides turned
up 50mm, bottom of shelves to be closed.
S.S. hanger rod size as per ceiling height.
25mm x 25mm S.S. pipe hanging support.
Mounting Height-1400mm A.F.F.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 745 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-03
UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
2080 mm
750 mm
800 mm
CAPACITY
As per 400mm x
600mm Baking tray
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
NA
Hot
ᴓ
NA
Waste
ᴓ
NA
ELECTRIC :
Power
0.45 KW
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
ᴓ
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Equipment mounted below S.S. top
0.9mm thick S.S. top.
Without splash.
SS 304 interior and exterior.
100mm high adjustable legs.
Nine (09) SS removable & Adjustable shelves.
Three (03) no 304 S.S Doors with insulation.
Door Opening As per 400mm x 600mm Baking tray.
Ambient temperature 43 deg C.
Internal Temp 0 Deg C to 4 Deg C.
Air-cooled.
REFRIGERANT GAS: R-134 A.
Housing on Right side. Complete with Open able Drawer
type sliding Access.
Digital read out thermometer, cord with time delay auto start.
Forced draft cooling.
Door activated light on – off.
50mm thick P.U. foam on all sides.
Drip tray with heating.(for condensate water evaporation)
ACCESSORIES:
SPECIAL NOTE:
WILLIAMS
IGLU
HB3U-XDDD (CUSTOM BUILT)
EQUALANT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 746 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-04
WALL MOUNTED LOCKABLE STORAGE
CABINET
QUANTITY: 01
SIZE
Width:
Depth:
Height:
2000mm
375 mm
700mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
NA
Hot
ᴓ
NA
Waste
ᴓ
NA
SPECIFICATIONS
•
•
•
•
1.2 mm thick S.S. welded body construction.
Full width 1.2 mm thick S.S. bottom & intermediate shelves
Four (04) no. 1.2 mm thick S.S. double pan Hinged door with
integral Handle & locking arrangement.
Mounting Height 1400mm A.F.F.
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
ᴓ
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 747 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-05
WORK TABLE WITH SINK & UNDER SPACE
FOR UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
5900mm
800 mm
865mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Waste
∅
2”
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
•
EXHAUST
NA
•
GAS:
BTU
NA
Con.
∅
•
NA
2.0mm thick S.S. Top.
150mm High rear & left side splash.
Top secured to 12/25mm x 75mm x 25/12mm x 2.0 mm Thick S.S.
hat type welded channel frame work.
Twelve (12)) no. 38mm x 38mm x 1.2 mm thick S.S. square pipe.
legs. With adjustable bullet feet.
Left side of unit provide One (1) no. 500mm x 500mm x 200mm
deep x 2.0mm thick S.S. sink, Sink Complete with 50mm dia lever
handle operated waste outlet & rear connected overflow.
0.9mm thick S.S Apron front of Sink.
Right side of sink provided parking space for space for mobile
equipment garbage can
AS shown in plan provide mounting space for Under counter
refrigerator.
Balance right side of unit provide balance space 1.2mm thick part
bottom and middle shelf.
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 748 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-07
GARBAGE CAN
QUANTITY: 02
SIZE
Width:
502 mm
Dia:
410 mm
CAPACITY
70 liters
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
Height:
673 mm
SPECIFICATIONS
• Polyethylene Construction.
• With rust, dent, chip or peel free.
• Heavy duty Pedal Mechanism.
• Tight fitting overlapping lid.
• With Round Corner.
• 70 Liter Container Equipped with 2 full plastic Rear Wheels for
better maneuverability.
• Unit should be suitable for work in Food service area.
• Color and qty As Per operator.
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Color and qty As Per operator.
PROBBAX
S0-1271
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 749 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-08
UNDER COUNTER REFRIGERATOR
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
2080 mm
750 mm
800 mm
CAPACITY
As per 400mm x
600mm Baking tray
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
NA
Hot
ᴓ
NA
Waste
ᴓ
NA
ELECTRIC :
Power
0.45 KW
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
ᴓ
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Equipment mounted below S.S. top
0.9mm thick S.S. top.
Without splash.
SS 304 interior and exterior.
100mm high adjustable legs.
Nine (09) SS removable & Adjustable shelves.
Three (03) no 304 S.S Doors with insulation.
Door Opening As per 400mm x 600mm Baking tray.
Ambient temperature 43 deg C.
Internal Temp 0 Deg C to 4 Deg C.
Air-cooled.
REFRIGERANT GAS: R-134 A.
Housing on Left side. Complete with Open able Drawer type
sliding Access.
Digital read out thermometer, cord with time delay auto start.
Forced draft cooling.
Door activated light on – off.
50mm thick P.U. foam on all sides.
Drip tray with heating.(for condensate water evaporation)
ACCESSORIES:
SPECIAL NOTE:
WILLIAMS
IGLU
HB3U-XDDD (CUSTOM BUILT)
EQUALANT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 750 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-09
WALL SHELVES
QUANTITY: 02
SIZE
Width:
Depth:
Height:
2200 mm
300 mm
200 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
1.2 mm thick S.S. Wall shelves.
Rear & both sides turned up 50mm & Hemmed out side, Front
turned down 38mm & in 12mm.
Shelves secured to bracket with acorn S.S. nuts & bolts.
Three (03) no. 2.0 mm thick S.S. wall Brackets. Secured to top
with acorn Nuts & Bolts & Bracket secured to wall with anchor
fasteners.
Mounting Height- 1400mm a.f.f. and 1700 a.f.f.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 751 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-10
MICROWAVE OVEN
QUANTITY: 01
SIZE
Width:
Depth:
Height:
550 mm
514 mm
362 mm
CAPACITY
34 LTRS
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
1.8 K.W
Voltage
220v-50c-1p
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
Counter Top.
Inter & Exterior S.S Construction.
Digital display.
Countdown timer.
With Two Magnetron(s).
Programable.
Removable airs filter with clean filter reminder.
See through door,
Pull handle door opening.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
Standard Accessories.
SPECIAL NOTE:
MENU-MASTER
MERRY-CHEF
DFS 18E
HD 1925
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 752 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-13
TABLE TOP PALENTRY MIXER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
221 mm
358 mm
353 mm
CAPACITY
4.8 Liter.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• Table top unit.
• Full stainless steel body.
• With variable speed.
• Suitable for beating, mixing and kneading.
ELECTRIC :
Power
0.3 KW
Voltage
220v-50c-1p
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
4.8 Liter bowl, Standard functional cover, Stainless steel beater, Plastic
laminated kneading hook, Plastic laminated beater, Power cord with plug.
SPECIAL NOTE:
HOBART
KOLB
SALVA
N 50
KP26M1XWH
BM-5-E
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 753 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-14
ATTACHMENT HOLDING RACK
QUANTITY: 01
SIZE
Width:
Depth:
Height:
750 mm
225 mm
100mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
SPECIFICATIONS
100mm x 6mm thick S.S. Plate welded to S.S. bar & secured to
wall with anchor fasteners.
50mm x 6mm thick S.S. bar with both ends 25mm radius welded
to S.S. 100mm high x 6mm thick S.S. plate
Six (06) No. S.S. Hooks to be provided.
Mounting Height- 1900mm A.F.F
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 754 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: CK-15
BREAD SLICER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
680 mm
640 mm
760 mm
CAPACITY
Cutting length 400 mm
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
NA
Hot
ᴓ
NA
Wast
e
ᴓ
NA
SPECIFICATIONS
• Counter top unit.
• Semi automatic cutting on support.
• S.S. knives.
• S.S. crumb box
• Slice thickness 8-16 mm.
• Cutting width 400 mm.
ELECTRIC :
Power
0.5 KW
Voltage
220v-50c-1p
EXHAUST
NA
GAS:
BTU
NA
Con.
ᴓ
ACCESSORIES:
SPECIAL NOTE:
.
KOLB
SALVA
GC-1034
T-45
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 755 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-16
DOUGH SHEETER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
2750 mm
1020mm
1300 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.75 KW.
Voltage
440v-50c-3p
EXHAUST
NA
SPECIFICATIONS
• Free Standing
• Stainless steel body.
• Rolling reverse by lever
• With Single grills.
• 4 castors with breaks
• Stainless steel lower and upper removable scrapers.
• Stainless steel grids.
• Flour box.
• Recovery Chute.
• Working width: 600.
• Lowering of cylinders from 1 to 40 mm.
• Stainless steel cylinders: Ø 72 mm.
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
Foot control, Automatic croissant cutter, 2-speed.
SPECIAL NOTE:
.
KOLB
RONDO DOGE
SALVA
HL32003
SSO6405
EQUIVLANT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 756 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-17
ATTACHMENT HOLDING RACK
QUANTITY: 01
SIZE
Width:
Depth:
Height:
900 mm
225 mm
100mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
SPECIFICATIONS
100mm x 6mm thick S.S. Plate welded to S.S. bar & secured to
wall with anchor fasteners.
50mm x 6mm thick S.S. bar with both ends 25mm radius welded
to S.S. 100mm high x 6mm thick S.S. plate
Six (06) No. S.S. Hooks to be provided.
Mounting Height- 1900mm A.F.F
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 757 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-18
INSECT- O- CUTOR
QUANTITY: 01
SIZE
Width:
Depth:
Height:
625 mm
250 mm
175mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• Twin tubes
• Unit suitable for ceiling suspension or mounting on wall,
• A proven approach to killing flies, conveniently and hygienically
• Unit with plastic coated M.S. guards provided
• No fumes, no chemicals, no odours –
• enviro-friendly
ELECTRIC :
Power
0.25 K.W
Voltage
220v.50c.1p
Gas:
BTU
NA
Con.
∅
NA
•
ACCESSORIES:
Power cord, Complete with mounting arrangement.
SPECIAL NOTE:
PCIL
L-L (LOW LINE) PESTOFLASH
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 758 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-19
SPIRAL DOUGH KNEADER
QUANTITY: 01
SIZE
WIDTH:
DEPTH:
HEIGHT:
730 MM
1250 MM
1300 MM
CAPACITY
119 LITER (55 KG DOUGH)
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
½”
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
POWER
4.10 KW
VOLTAGE
440v-50c-3p
SPECIFICATIONS
• Free standing unit
• Unit to be provided with aisi 304 ss bowl, cutter and spiral
kneading hook
• With safety grid
• Starting push button
• Emergency push stop button
• Clock for low speed kneading
• Clock for high speed kneading
• Should be equipped with security system
• Unit with two speed mixing.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
mm
ADDITIONAL BOWL
SPECIAL NOTE:
.
KOLB
SALVA
GC-2092
AE-50
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 759 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-19A
WATER CHILLER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
727 mm
653 mm
1093mm
CAPACITY
100 ltrs.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
1/2"
Purified
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.5 H.P.
Voltage
220v-50c-1p
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
Equipment suitable to be mounted above false
ceiling and hanging in main ceiling.
Water chilling down to +3°C
100 ltrs. storage of chilled water.
External finishing in plastified galvanized steel.
Internal tank S.S. construction.
Water tank: 100 liters
Yield: Forced driven by pump for 80 liters per
hour, from +18°C to +3°C
Electronic control panel. Automatic refilling. .
Outlet pump with possibility of remote control by a
water doser/mixer
Integrated condensing unit.
Easy access to the internal tank for cleaning
All internal tank and coil in stainless steel
100m dia castor with brakes
Preset for connection to water doser/mixer
SPECIAL NOTE:
.
TECNOMAC
Ecomac 100 with pump
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 760 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-19B
WATER MIX MEASURE DEVICE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
460 mm
100 mm
400mm
CAPACITY
100 litres
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Wast
e
∅
NA
ELECTRIC :
Power
0.5 H.P.
Voltage
220v-50c-1p
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
Dosing and mixing water coming from the water
chiller and tap water.
PVC box 4 mm thick. IP 55
Touch type keyboard with temperature display
Temperature regulation knob in stainless steel
Connection pipe ½”
Temperature regulation range: 2 - 55°C
Temperature precision: ± 1°C
Dosing precision: ± 1%
Maximun dosing: 999,9 liters
Water delivery: 15 liters at 1 bar and 20°C
35 liters at 5 bar and 20°C
All pipes in stainless steel or brass
Cleanable water filter
Wall mounting fixing arrangement
SPECIAL NOTE:
.
TECNOMAC
Eco Water Doser / Mixer
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 761 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-19C
WATER FILTER FOR WATER CHILLER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
8.04”
5.25”
7.59”
CAPACITY
9000 GALLONS
(34069 liters)
MEP REQUIREMENT
PLUMBING:
Cold
∅
3/8”
Hot
∅
NA
Waste
∅
3/8”
ELECTRIC:
Power
NA
Voltage
NA
SPECIFICATIONS
• NSF certified scale stick.
• Allow 2-1/2” clearance below the cartridge for easy
cartridge replacement.
• Include built in water shut-off valve system.
• Built in water pressure gauge.
• Shipping Weight is 6lbs.
• DO NOT USE TREAT CONDENSATE COOLING WATER.
TEMPERATURE:
80°F(27°C)
SERVICE FLOW RATE:
MAX. 1.67 GPM
PRESSURE
REQUIREMENTS:
10-125 PSI, NON SHOCK
ACCESSORIES:
PROVIDE 2 SPARE CARTRIDGES.
SPECIAL NOTE:
KEC to connect with piping to equipment and to water source. All
externally exposed piping shall be stainless steel.
EVERPURE
QC71 SINGLE-MH2
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 762 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-20
ATTACHMENT HOLDING RACK
QUANTITY: 01
SIZE
Width:
Depth:
Height:
900 mm
225 mm
100mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
SPECIFICATIONS
100mm x 6mm thick S.S. Plate welded to S.S. bar & secured to
wall with anchor fasteners.
50mm x 6mm thick S.S. bar with both ends 25mm radius welded
to S.S. 100mm high x 6mm thick S.S. plate
Six (06) No. S.S. Hooks to be provided.
Mounting Height- 1900mm A.F.F
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 763 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-21
PLANETRY DOUGH MIXER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
750 mm
950 mm
1400 mm
CAPACITY
60 liter
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
½”
Hot
ᴓ
NA
Waste
ᴓ
NA
ELECTRIC :
Power
1.5 KW
Voltage
415v-50c-3p
SPECIFICATIONS
• Free Standing unit
• Full stainless steel body
• Equipment suitable to knead dough for bakery.
• Three Fixed speeds
• With safety protector made of Horizontal rotating opening system.
• With liquid channel to enable addition during operation
• With speed selector
• Pilot light
• On/Off switch.
EXHAUST
NA
GAS:
BTU
NA
Con.
ᴓ
ACCESSORIES:
Additional Bowl of 40 liter, Stainless steel wire Wisk, Stainless steel
paddle, Stainless steel kneading tool.
SPECIAL NOTE:
.
KOLB
SALVA
HOBART
GC-1040
BM-60
Equivalent
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 764 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-22
ATTACHMENT HOLDING RACK
QUANTITY: 01
SIZE
Width:
Depth:
Height:
900 mm
225 mm
100mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
ELECTRIC :
Power
NA
Voltage
SPECIFICATIONS
100mm x 6mm thick S.S. Plate welded to S.S. bar & secured to
wall with anchor fasteners.
50mm x 6mm thick S.S. bar with both ends 25mm radius welded
to S.S. 100mm high x 6mm thick S.S. plate
Six (06) No. S.S. Hooks to be provided.
Mounting Height- 1900mm A.F.F
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 765 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-23
DOUGH DIVIDER CUM ROUNDER
QUANTITY: 01
SIZE
Width:
Depth:
Height:
620 mm
610 mm
2100 mm
CAPACITY
30 pieces per operation
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.55 KW
Voltage
440v-50c-3p
SPECIFICATIONS
• Free standing unit
• Should be able to divide 30 pieces in one operation
• Weight per portion to vary from 30 gm to 100 gm
• With Aluminum steel rounding disc
• AISI 304 SS blade
• With security device to protect from over heating
• With castors with breaks
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
ACCESSORIES:
SPECIAL NOTE:
.
KOLB
SALVA
GC-1036
DB-30
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 766 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-24
UNDER COUNTER REFRIGERATOR
QUANTITY: 02
SIZE :
Width:
Depth:
Height:
2080 mm
750 mm
800 mm
CAPACITY
As per 400mm x
600mm Baking tray
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
NA
Hot
ᴓ
NA
Waste
ᴓ
NA
ELECTRIC :
Power
0.45 KW
Voltage
220v-50c-1p
Gas:
BTU
NA
Con.
ᴓ
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Equipment mounted below S.S. top
0.9mm thick S.S. top.
Without splash.
SS 304 interior and exterior.
100mm high adjustable legs.
Nine (09) SS removable & Adjustable shelves.
Three (03) no 304 S.S Doors with insulation.
Door Opening As per 400mm x 600mm Baking tray.
Ambient temperature 43 deg C.
Internal Temp 0 Deg C to 4 Deg C.
Air-cooled.
REFRIGERANT GAS: R-134 A.
Housing on Right side. Complete with Open able Drawer
type sliding Access.
Digital read out thermometer, cord with time delay auto start.
Forced draft cooling.
Door activated light on – off.
50mm thick P.U. foam on all sides.
Drip tray with heating.(for condensate water evaporation)
ACCESSORIES:
SPECIAL NOTE:
WILLIAMS
IGLU
HB3U-XDDD (CUSTOM BUILT)
EQUALANT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 767 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-25
CEILING HUNG 2 TIER SHELVES
QUANTITY: 01
SIZE
Width:
Depth:
Height:
5200 mm
600 mm
300mm
+1000mm
rod
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
1.2mm thick S.S. shelves.
All sides turned down 40mm & in 12mm, bottom of shelves to be
closed.
S.S. hanger rod size as per ceiling height.
25mm x 25mm S.S. pipe hanging support.
Mounting Height-1500mm A.F.F.
75mm high 6mm dia S.S. pipe railing ar center & both sides.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 768 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-26
MOBILE INGREDIENT BINS
QUANTITY: 04
SIZE
Width:
Depth:
Height:
419 mm
749 mm
711 mm
CAPACITY
Sugar-226 lbs/Flour-150 Lbs.
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
NA
Hot
ᴓ
NA
Waste
ᴓ
NA
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
• Design of lid encourages spilled liquids to drain off back lid while
protecting contents. Two-piece lid comes apart for easy cleaning.
• The break-resistant, polycarbonate lids are clear to easily identify
contents.
• A convenient S-hook is provided on the front edge for hanging
Scoop.
• Heavy-duty 3" (76 cm) non-marking casters, 2 front swivel, 2 rear
fixed for easy maneuvering.
EXHAUST
NA
GAS:
BTU
NA
Con.
ᴓ
ACCESSORIES:
Unit Complete with Scoop and Scoop Holder.
SPECIAL NOTE:
.
CAMBRO
HUPFER
IBS27
MTW/K 0124292
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 769 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: CK-27
GRANITE TOP TABLE W/UNDER SPACE
FOR UNDER COUNTER REFRIGERATOR
QUANTITY: 02
SIZE :
Width:
Depth:
Height:
2600mm
1650mm
865mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
NA
Hot
ᴓ
NA
Wast
e
ᴓ
NA
SPECIFICATIONS
•
•
•
ELECTRIC :
Power
NA
•
Voltage
NA
•
38 mm thick black Granite top,
Stone top rest in to 50mm x 50mm x 6mm thick S.S.
angle frame work & reinforced with 12/25mm x 75mm
x 25/12mm x 2.0 mm Thick S.S. hat type welded
channel.
Ten (10) no. 38mm x 38mm x 1.6 mm thick S.S.
square pipe legs. With adjustable bullet feet.
Under side of table provide mounting space for
Modular under counter refrigerator.
Granite top color as per operator.
EXHAUST
NA
GAS:
BTU
NA
Con.
ᴓ
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be
submitted for approval
CUSTOM
BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 770 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-32
BENCH WEIGHING SCALE
QUANTITY: 01
SIZE
Width:
Depth:
Height:
600 mm
350 mm
300 mm
CAPACITY
20 kg.
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
0.02 K.W
Voltage
220v.50c.1p
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIFICATIONS
• Counter top electronic digital scale.
• S.S pan size 240 mm x 300 mm.
• Unit suitable to weigh up to 20 KGs increments of 2 Gms.
• Rechargeable battery back up.
• Display Size : 20mm Red & 20mm Green
• Display Type : 6 digit LED, 7 Segment Number digits
• Operating Temprature : 10oC to 40oC
• Humidity : 95% RH (Non Condensing)
• Tare Range : To Capacity by Subtraction
• Stabilization Time : 2.5 Sec
• With In built Battery Charger.
• With 4 Number of key
• Auto power of function
• Stainless Steel platter of Mart Finishing
• With Advanced Microprocessor based design
• Fast Weighing response
•
• Power cord
• RS 232 Interface
• Counting Function
SPECIAL NOTE:
SATWIK
IQ 100
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 771 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-33
GRANITE TOP TABLE W/SINK
QUANTITY: 01
SIZE :
Width:
Depth:
Height:
5200 mm
900 mm
865mm
CAPACITY
M.E.P REQUIRMENT
SPECIFICATIONS
PLUMBING :
Cold
∅
½”
Hot
∅
½”
Waste
∅
2”
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
•
•
EXHAUST
•
•
NA
GAS:
BTU
NA
Con.
∅
38 mm Black Granite top, (Final color as per operator)
Stone top rest in to 50mm x 50mm x 6mm thick S.S. angle frame
work & reinforced with 12/25mm x 75mm x 25/12mm x 2.0 mm
Thick S.S. hat type welded channel .
25mm x 25mm square pipe cross bracing welded to leg at rear and
sides as shown) below sink
Ten (10) no. 38mm x 38mm x 1.6mm thick S.S. square pipe legs.
With adjustable bullet feet.
Right side of unit provide One (1) no. 450mm x 450mm x 200mm
deep x 2.0mm thick S.S. sink, Sink Complete with 50mm dia lever
handle operated waste outlet & rear connected overflow.
0.9mm thick S.S Apron front, rear & right of Sink.
As shown left side provide balance space 1.2mm thick bottom
shelf.
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 772 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-34
CEILING HUNG 2 TIER SHELVES
QUANTITY: 01
SIZE
Width:
Depth:
Height:
5200 mm
300 mm
300mm
+1000mm
rod
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
•
•
•
•
•
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
1.2mm thick S.S. shelves.
Front turned down 40mm & in 12mm, Rear & both sides turned
up 50mm, bottom of shelves to be closed.
S.S. hanger rod size as per ceiling height.
25mm x 25mm S.S. pipe hanging support.
Mounting Height-1500mm A.F.F.
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 773 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-38
INSECT- O- CUTOR
QUANTITY: 15
SIZE
Width:
Depth:
Height:
625 mm
250 mm
175mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
SPECIFICATIONS
• Twin tubes
• Unit suitable for ceiling suspension or mounting on wall,
• A proven approach to killing flies, conveniently and hygienically
• Unit with plastic coated M.S. guards provided
• No fumes, no chemicals, no odours –
• enviro-friendly
ELECTRIC :
Power
0.25 K.W
Voltage
220v.50c.1p
Gas:
BTU
NA
Con.
∅
NA
•
ACCESSORIES:
Power cord, Complete with mounting arrangement.
SPECIAL NOTE:
PCIL
L-L (LOW LINE) PESTOFLASH
LOCAL MARKET EQUIPMENT
BY- CLIENT/OPERATOR
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 774 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-39
DRAIN TROUGH GRATING
QUANTITY: 18
SIZE
Width:
Depth:
Height:
350mm
350mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
NA
ACCESSORIES:
SPECIAL NOTE:
SPECIFICATIONS
• Removable S.S Grating of 304 0f suitable size with 25 mm
height.
• Grating with hairline finishing.
• Grating with 5mm thick for outside ring, 3mmthick for interior
section,
• Grating has to be slip-resistant for one side, Plain on the other.
• Minimum Point Load: 150 kg per square meter.
• Spot welding not to be used.
• To be made in one piece/ parts to make it suitable for lifting
• 70 mm Trough to be made with 16 Gauge AISI 304 SS.
• Trough to be provided with drain outlet at center or as per site
with all sides sloping towards drain outlet.
• Drain out let of the trough to have 16 gauge extension flanges
of 40 mm depth and 100 mm dia. for entry in the floor drain.
• Trough has to be fully welded with no gaps.
• Suitable to be for fitting with type of flooring coming at site.
Silt Basket, With NBR infill (Polymer fill for bend), O ring for fitting
into drain system
Trough to be provided as per the flooring type coming at site.
Coordination required at site.
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 775 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-41
SLOT CHANNEL / DRAIN RAIL
QUANTITY: 01
SIZE
Width:
Depth:
Height:
1450mm
250mm
70 mm
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
Cold
∅ NA
Hot
∅
NA
Waste
∅
4”
ELECTRIC :
Power
NA
Voltage
NA
Gas:
BTU
NA
Con.
∅
SPECIFICATIONS
Channels:
Material: 2mm. thick Stainless Steel Grade: 304 Pickle
Passivated. Levelling bolts to adjust height. Inclusive of foul air trap, silt
basket, drainage ring (O-ring)
Gully: Corrosion protected deep-drawn gully body stainless steel grade
304. Pickle Passivated. Gully body outer diameter is 178mm, with vertical
outlet size 110 mm diameters.
NA
Grating for Gully top: Anti-slip electro-polished stainless steel
grating,with load bar size 30mm X 2mm.Load Class L,
according to EN1253.
Gratings are made by arc-welding (not spot welding)
Side bottom Inlets :50mm Socketed Side inlet made of Pickle Passivated
Stainless Steel & EPDM seal for taking indirect waste from surrounding
kitchen equipment if any
Function
To drain heavy waste water via in-direct drainage from food service
equipment and kitchen floor.
Modular structure for gratings with smaller individual grating to fit the
size of the channel to avoid work injury from being too heavy to bulky to
handle
Slab Penetration: Requires 110mm dia waste drain connection. Requires floor cut-out and recess. Refer to
WPR drawings. Location/number of drain pipes from food service equipments to be
coordinated with MEP Consultant.
SAFETY NORMS:
ACO
BLUCHER
CUSTOM BUILT
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 776 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-42
MOBILE G.N PAN TROLLEY
QUANTITY: 01
SIZE
Width:
Depth:
Height:
662 mm
734 mm
1645
CAPACITY
18 GN 2/1 or 36 GN 1/1
M.E.P REQUIRMENT
PLUMBING :
Cold
∅
NA
Hot
∅
NA
Waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
EXHAUST
NA
GAS:
BTU
NA
Con.
∅
NA
SPECIFICATIONS
• The shelf trolley consists of S/S 18/10 (AISI 304), U-profile guide
rails welded between the stable 25 x 25 mm square tubes (curved
W/out a recess). with a tip safety as well as push-through protection on
both sides for GN 2/1, 1/1 and 2/4.
• A 20 x 10 mm square tube welded in elevated at mid-height on both
front and back of the shelf trolley for additional stability.
• corrosion- resistant synthetic castors (4 steering castors, 2 of locking
brakes, castor diameter 125 mm
• Material:
S/s 18/10 (AISI 304),Polyamide (PA)
• Material thickness of the
• square tube:
1.5 mm
• Material thickness of the support rails:1.2 mm
• Load-bearing capacity - 200 kg
• Number of support - pairs: 18
• Capacity:
18 x GN 2/1 or36 x GN 1/1
• U-profile guide rails with tip safety and push-through protection on
both sides
ACCESSORIES:
SPECIAL NOTE:
Shop drawing with plan, elevation and section to be submitted for
approval
CUSTOM BUILT
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 777 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: CK-43
REFER SHELVING
QUANTITY: 10
SIZE
WIDTH:
DEPTH:
HEIGHT:
914MM-05
535 MM
1830 MM
1060MM-05
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
cold
∅
NA
hot
∅
NA
waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
GAS:
BTU
NA
CON.
∅
SPECIFICATIONS
• Corrosion Proof Polymer Mats With Natural Finish
• Total five (05) no. shelves..
• Polymer Mat With Exclusive Built In Antimicrobial Product
Protection
• S.S Uprights.
• Edge Reinforced Nylon.
• With Corner Hooks
• Hanging Rails
• Shelf Support.
• Maximum Load 600 Kg Per Field.
• Adjustable Shelves
• With Adjustable S.S Feet.
• Shelving To Be Installed As Continuous Length With Common
Uprights With Maximum Distance Of 1050 Mm.
ACCESSORIES:
SPECIAL NOTE:
Space saving common use of uprights between 2 shelving units
possible, depending upon site / space conditions. The sizes and
number can verify as per the final plan of the store.
CAMBRO
HUPFER
METRO
CAMSHELVING
NORM 12
METROMAXQ
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 778 of 1187
New Delhi
Dubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO: CK-45
FREEZER SHELVING
QUANTITY: 09
SIZE
WIDTH:
DEPTH:
HEIGHT:
914MM-04
535 MM
1830 MM
1060MM-04
1220 MM-01
CAPACITY
M.E.P REQUIRMENT
PLUMBING :
cold
∅
NA
hot
∅
NA
waste
∅
NA
ELECTRIC :
Power
NA
Voltage
NA
GAS:
BTU
NA
CON.
∅
SPECIFICATIONS
• Corrosion Proof Polymer Mats With Natural Finish
• Total five (05) no. shelves..
• Polymer Mat With Exclusive Built In Antimicrobial Product
Protection
• S.S Uprights.
• Edge Reinforced Nylon.
• With Corner Hooks
• Hanging Rails
• Shelf Support.
• Maximum Load 600 Kg Per Field.
• Adjustable Shelves
• With Adjustable S.S Feet.
• Shelving To Be Installed As Continuous Length With Common
Uprights With Maximum Distance Of 1050 Mm.
ACCESSORIES:
SPECIAL NOTE:
Space saving common use of uprights between 2 shelving units
possible, depending upon site / space conditions. The sizes and
number can verify as per the final plan of the store.
CAMBRO
HUPFER
METRO
CAMSHELVING
NORM 12
METROMAXQ
KIT. EQPT. SPECS
INDIA
UAE
JOARSAHARA DHAKA-BANGLADESH
Sector -17, Dwarka
Dubai Airport Free Zone
www.hpgconsulting.com
Page- 779 of 1187
New Delhi
Dubai
Integrated Solution for Ho
ospitality Projec
cts
An ISO 90011:2008 Certified Com
mpany
ITEM NO
O : CK-50
BA
AKER’S TAB
BLE W/SIN
NK & SPICE
E BIN SHEL
LF
QUANTIITY: 01
SIZE :
Width:
pth:
Dep
H
Height:
1800 mm
m
750 mm
8665 mm
CAPACIT
TY
M.E.P RE
EQUIRMENT
PLUMBIN
NG :
Cold
∅
½”
Hot
∅
½”
Waste
∅
2” Waste
SPE
ECIFICATION
NS
• 1.6 mm thhick S.S. Top.
• 150mm H
High Rear side Splash.
• Top and bbody secured to
t 12/25mmx775mmx25/12 mm
m # 1.6 mm T
Thick s.s. Hat
type weldded channel fraame work.
• Right sidee One (1) no. 450mm
4
x 450m
mm x 200mm deep
d
1.6 mm thhick S.S. sink,
Sink Com
mplete with 50mm
5
dia lever handle opeerated waste ooutlet & rear
connectedd overflow. Proovide end poinnt joint connecttion from sink to
t L angle.
• 25X25mm
m square S.S. pipe
p
cross bracing welded too legs at Rear & both sides.
Front opeen for mobile inngredient bins.
• 0.9 mm thhick S.S. front & right side appron of sink.
• Full widthh x 225mm deep 1.2 mm thhick S.S. Splaash mounted sppice bin shelf
angular shape.
s
Compleete with sevenn (7) no. 200m
mm x 200mm Polyethylene
Clear whiite bin with Lidd.
• Six (06) nno. 38X38mm square pipe S.S
S. legs. With s.s. adjustable bullet
b
feet.
ELECTRIIC :
Power
NA
Voltage
NA
EXHAUST
T
NA
GAS:
BTU
NA
Con.
∅
NA
mm
ACCESSO
ORIES:
Seveen (7)Polyethyylene Clear whiite bin with Lidd
SPECIAL
L NOTE:
All Sheet
S
/Pipe S.S
S. 304 Grade Pre-polished P
Plastic Coated
d. Rear gap off splashes
closeed with 0.9 mm
m thick s.s sheeet. All Sheet /Pipe S.S. 3044 Grade Pre-polished
Plasstic Coated. Sh
hop drawing with
w plan, elevvation and secction to be sub
bmitted for
apprroval.
CUSTOM
M BUILT
KIT. EQPT
T. SPECS
INDIA
UAE
JO
OARSAHARA
A DHAKA-BAN
NGLADESH
Sectoor -17, Dwarka
Dubai Airport Free Zonee
Page-- 780 of 11877
New D
Delhi
Duubai
Integrated Solution for Hospitality Projects
An ISO 9001:2008 Certified Company
ITEM NO : CK-51
MOBILE INGREDIENT BINS
QUANTITY: 02
SIZE
Width:
Depth:
Height:
419 mm
749 mm
711 mm
CAPACITY
Sugar-226 lbs/Flour-150 Lbs.
M.E.P REQUIRMENT
PLUMBING :
Cold
ᴓ
NA
Hot
ᴓ
NA
Waste
ᴓ
NA
ELECTRIC :
Power
NA
Voltage
NA
SPECIFICATIONS
• Design of lid encourages spilled liquids to drain off back lid while
protecting contents. Two-piece lid comes apart for easy cleaning.
• The break-resistant, polycarbonate lids are clear to easily identify
contents.
• A convenient S-hook is provided on the front edge for hanging
Scoop.
• Heavy-duty 3" (76 cm) non-marking casters, 2 front swivel, 2 rear
fixed for easy maneuvering.
EXHAUST
NA