Please register your Zodiac products to activate three year warranty coverage by filling out and mailing the product registration card below. Zodiac Pool Systems, Inc.
(“Zodiac”) warrants the following products to be free from manufacturing defects in materials and workmanship for a period of three (3) years from the date of retail
purchase: Pumps, Filters (except for cartridges and grids, which are covered for 1 year), Heaters, Heat Pumps, Controls, Salt Water Chlorine Generators, Valves, Lights
(excluding bulbs), Water Features, Polaris® Booster Pumps, Polaris TR35P, 380, 360, 360 Black Max™, 280, 280 Black Max, Polaris manufactured derivatives, and 3900
Sport automatic pool cleaners [except for scratches/scrapes on body bottom due to normal wear and tear from pool surface, tires, sweep hose assembly, and bag (all
of which are not warranted); and wheel bearings (warranted for 1 year)]. Polaris booster pump and automatic pressure pool cleaner models are warranted only when
they are installed together (except for the Polaris 360) and in addition to a qualifying Jandy® pump and filter set.
Replacement products, or parts, provided at no charge are warranted only until the original finished good’s warranty has expired. Purchased replacement parts are
warranted for ninety (90) days from the date of retail purchase, with the exception of electronic salt water chlorine generator cells and electrodes, and “Factory Rebuild
Kits” for Polaris pressure cleaners, which are warranted for one (1) year.
This warranty is valid only when the original equipment is installed by a registered ProEdge pool professional, or one of its employees, who is licensed and qualified in
pool equipment by the jurisdiction in which the product will be installed, where such state or local requirements exists. In the event no such state or local requirement
exists, the installer and maintainer must be registered with ProEdge and be a professional with sufficient experience in pool equipment installation and maintenance.
This warranty includes only the products referenced above. A minimum of a Jandy Pro Series filter pump and qualified Jandy Pro Series filter must be installed for
coverage to be in effect.
This warranty applies only to products purchased and utilized in the 50 United States and Canada, is limited to the first retail purchaser, is not transferable, and does
not apply to products that have been moved from their original installation sites. The liability of Zodiac shall not exceed the replacement of the defective product or its
parts, and does not include transportation costs, or any items or materials required to make the repair including, but not limited to, refrigerant and other expendables.
Zodiac is not responsible for charges or delays incurred when a servicer is unable to perform service due to lock outs, animals, intolerable pool or spa water
temperature when entry into pool or spa is required to perform service, service refusals, etc. No reimbursements will be made for loss and/ or usage of water, fuel or
other resources resulting from product defect. A third party service provider may charge the end-user customer for parts and/or labor required to resolve any issue not
covered under warranty, such as improper installation. Zodiac is not responsible for these charges. Product discoloration, or any other cosmetic or superficial damage
or deterioration, regardless of its cause, is not covered by this warranty. This warranty does not cover failures, defects, malfunctions or complaints resulting from any of
the following:
1. Failure to properly install, operate or maintain the product in accordance with Zodiac’s published installation, operation and/or maintenance manuals.
2. The workmanship of any installer of the product.
3. Use of non-factory authorized parts or accessories in conjunction with the product(s).
4. Product modifications or adjustments that are not in accordance with Zodiac’s published installation, operation and/or maintenance manuals.
5. Not maintaining proper pool and/or spa chemical balance [pH levels between 7.2 and 7.8, with ideal range being between 7.4 and 7.6; Total Alkalinity (TA) between 80
to 120 ppm; Total Dissolved Solids (TDS) less than 2000, not including salt ppm].
6. Corrosion, erosion, scaling, calcification or other conditions caused by water hardness, chemical imbalance, or lack of product maintenance.
7. Chemical contamination of combustion air; or improper use of pool/spa chemicals, such as introducing chemicals upstream of the heater or cleaner hose, or through
the skimmer; or use of copper-based algaecides in conjunction with Nature2® products.
8. Abuse, damage during transit or installation, mis-handling, tampering, vandalism, alterations, accidents, fires, floods, storms, earthquakes, power surges, lightning, pets
or other animals, insects and/or their hives or nests, negligence, or acts of God.
9. Not grounding and/or bonding as specified, mis-wiring, loose wiring, cut or kinked wires, loose cable connections, incorrect wire runs, incorrect breaker size, breaker(s)
in “off” position, improper wire gauge, moisture in electrical conduit, improper electrical supply, dead batteries, incorrect plumbing, inadequate size of pipe and/or
fittings, cross-threading, over-tightening, under-tightening, glue drips or residue, improperly secured covers, improper valve placement or usage, unsynchronized valve
actuators, valve actuators in “off” position, improper gas pipe sizing, lack of fuel, inadequate heater vent pipe sizing, programming errors, or removal of in-line filter
screens from pool cleaners.
10. Freezing, corrosion, cracking, overheating, warping, flooding, moisture intrusion or any other condition caused by or related to weather, climate, improper winterization,
improper equipment placement, inadequate ventilation, inadequate water circulation, roof run-off, sprinklers, irrigation systems, or lights or other products on or near the
pool/spa or pool/spa equipment pad.
11. Operating the product at water flow rates below minimum, or above maximum, specifications. Operating any product or piece of equipment including, but not limited to,
pumps, with insufficient quantities of water.
12. Improper equipment sizing, or product mis-applications including, but not limited to, unsuitable application of a pool cleaner, or use of residential products on
commercial applications.
13. Dirty, clogged, blocked, covered or obstructed plumbing, cleaner parts, chlorine generator cells or sensors, pump strainer baskets, pump impellers, heater orifices
(including blockage by spider webs), heater grills, doors, flue boxes, flue vents or flue collectors, filter elements, or filter breather tubes.
14. Collateral damage caused by failure of any component including O-rings, pump strainer baskets, DE grids, sand filter laterals, or cartridge elements.
This is the only warranty given by Zodiac. No one is authorized to make any other warranties on behalf of Zodiac. IMPLIED WARRANTIES, INCLUDING THE IMPLIED
WARRANTIES LISTED ABOVE. Some states and/or provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Zodiac expressly disclaims and excludes any liability for consequential, incidental, indirect, or punitive damages for breach of any expressed or implied warranty. In no event
shall Zodiac be liable for incidental or consequential damages of any nature, including damage to vinyl liners, plaster, aggregate-based pool surfaces, tile, stone, coping,
fixtures, skimmers or skimmer covers, plumbing, drains, equipment covers or shelters, landscaping, animals, plants, or dwellings. Some states and/or provinces do not allow
the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights that vary by state and/or province. For warranty consideration, contact the original dealer and
provide the following information: proof of purchase, model number, serial number, date of retail purchase, and date of installation. The dealer will contact the factory to obtain
instructions regarding the claim and to determine the location of the nearest independent service company. If the dealer is not available, you can locate an independent
service company in your area by visiting, or by emailing our Technical Support department at, or by calling our
Technical Support department at 800-822-7933. All returned parts must have a Returned Material Authorization number to be evaluated under the terms of this warranty.
Zodiac Pool Systems, Inc. | 2620 Commerce Way, Vista, CA 92081 | 1.800.822.7933 |
© 2014 Zodiac Pool Systems, Inc. ZODIAC ® is a registered trademark of Zodiac International, S.A.S.U., used under license. All other trademarks used herin are the property of their respective owners.
Perforate s
Register your product now to activate your three year warranty. Please complete the form below and mail.
First Name _______________________
_ Last Name __________________________ Date of Purchase _____________
Street Address _________________________________ City ___________________ State _______ Zip ____________
Telephone ________________________ Email Address ___________________________________________________
Pool Professional _______________________________ Contact Name _______________ Telephone ______________
Street Address _________________________________ City ___________________ State _______ Zip ____________
Product Information: Pump Model ________________________ Pump Serial Number ___________________________
Filter Model ______________________
Other Product ____________________
Other Product ____________________
Other Product ____________________
Other Product ____________________
Other Product ____________________
Filter Serial Number _______________________
Serial Number ____________________________
Serial Number ____________________________
Serial Number ____________________________
Serial Number ____________________________
Serial Number ____________________________
SL7064 Rev C 0714
Perforate s
Zodiac Pool Systems, Inc.
ProEdge® Registration
2620 Commerce Way
Vista, CA 92081