W10392 Rebound Skii Ball Instructions

W10392 Rebound Skii Ball
Assembly Instructions
10
2
1
4
3
11
12
13
16
18
8
14
15
7
6
9
5
17
Contents:
Item # Qty
1
1
2
1
3
1
4
1
5
1
6
1
7
3
8
2
9
2
Description
Large Fabric Target with Mesh
Joint Connector
Curved Left Pole w/ Pin
Curved Right Pole w/ Pin
XL Pole
Long Pole
Medium Pole
Short Pole
Long Legs
Item #
10
11
12
13
14
15
16
17
18
Qty
2
4
2
1
2
2
2
2
6
Description
T Connector with Hole
3 Way Connector
3 Way Connector w/ Pass Through
Bounce Target
Short Legs
Medium Legs
Bottom Adjustable Legs
Top Adjustable Legs
Balls
2
Large Target Assembly
Note: This target is assembled upside down and with the target
graphics facing down. Target will be flipped over for use.
1. Using the indicated parts layout the indicated items as shown.
2. Slide curved poles, items 3 and 4, into the pockets at the top of
the target (1). Connect them together with the joint (2).
3. Attach a T connector (10) to the bottom of the curved poles (3)
and (4), align such that the pin in the poles pops into the hole in the
connectors.
4. Slide the short poles (8) up through
the pockets in the target and into the T
connectors (10).
5. Attach a 3 Way Connector (11) to
pole (8) on the right side.
6. Attach the 3 Way Connector with
Step #7
Pass Through (12) to the pole (8) on the
left side.
7. Slide pole (5) through
Completed Target
pass through part of (12),
through the pocket on the
bottom of the target (1) and
into the 3 Way Connector
(11).
8. Install the short legs (14)
into the 3 way connectors
(11) and (12) at the bottom
of the target and the long
legs (9) into the T
connectors (10) in the
middle of the target.
3
4
10
10
8
8
1
12
11
5
7
Bounce Target Assembly
11
11
Note: This target is assembled upside down and with the target graphics facing
down. Target will be flipped over for use.
1. Using the indicated parts layout the indicated items as shown.
2. Slide a medium pole (7) through the pocket in the top of the bounce target
7
(13).
3. Attach a 3 Way Connector (11) to each end of the same medium pole (7).
4. Slide a medium pole (7) through each side pocket of the target (13) and into
the 3 Way Connectors (11).
5. Attach a 3 Way Connector (11) to the medium pole (7) on the left bottom side
of the target.
6. Attach a 3 Way Connector with slide through (12) to the medium pole (7) on
11
the bottom right side of the target.
7. Slide the long pole (6) through the
Step #7
pass through of the 3 Way connector
(12), through the pocket in the bottom
of target (13) and into the 3 Way
connector (11).
8. Insert a medium leg into the 3 Way
Connectors (11)
and (12) at the bottom of the target.
9. Slide the top of the adjustable legs (17) over the bottom of the adjustable legs (16). Align the pin
of the in the legs (16) such that it pops into the holes in (17) to create 2 adjustable leg assemblies.
10. Insert an adjustable leg assembly into each 3 Way Connector (11) at the top of the bounce
target.
7
13
12
6
Completed Target
Set-Up for Play
1. Flip both the large scoring target and the bounce target over so that the
graphics are facing the players and the targets are on their legs. Position the
bounce target a few inches in front of the scoring target approximately as
shown in the image to the right.
2. Using floor tape or some other means, create a foul line from which players
must toss their balls about 3 to 4 feet from the closest edge of the bounce
target.
Play and Scoring
1. A round of play is when all 6 balls have been thrown. In the first round the
youngest player goes first in the first round.
2. Players stand behind the foul line, toss or throw a ball at the bounce target
with the goal of having it rebound off the bounce target and into one of the
pockets on the scoring target. The first player throws their 3 balls, followed
by the 2nd player. Ball must hit the bounce target first and cannot be tossed
directly at the scoring target.
3. Players earn points for each ball that is in a pocket at the end of a round.
Players get 1 point for a ball in the pocket next to the number 1 on the target, 2
points for balls in the 2 pocket, 3 points for ball in the 3 pocket and 4 points for
balls in the 4 pocket.
4. After the first round, the player with the fewest points goes first.
5. The first player with a total 31 or more points at the end of a round wins the
game. If both players have more than 31 points, then the player with the most
points wins. If both players have more than 31 points and have the same
number of points, then a tie breaker ball is through by each player. The older
player tosses their ball first, followed by the younger player. The player with
the most points on that one ball wins the game. Tie breaker tosses continue
until one player wins.
Variations / Options – Use one or more of these variations or add your own.
Just make sure both players agree to and know the rules before the start of play
to avoid conflicts.
1. Play to a higher point total like 41 or 51.
2. Cancellation – balls in the same pocket from opposing players at the end of
a round cancel one another. One ball cancels one ball. If one player has 2
balls and another has 1, then the player with 2 would earn points for 1 of their
balls in that pocket.
3. Remove each player’s balls from the pockets after their half of a round is
over.
4. Change the height of the legs on the bounce target. Either change the
adjustable legs so that they are shorter or try switch the leg locations so that the
adjustable legs are in the front.
5. Move the bounce target further away from the scoring target or move the foul line further away from the bounce target to increase
the difficulty to score.
6. Play the game without the bounce target and just let players toss their balls directly at the scoring target to make the game easier to
play.
S&S Worldwide
www.ssww.com
W10392 Rebound Skii Ball
Revision - Original