ELECTRONICS 2016 / 2017 Amber Products Guide

ELECTRONICS
2016 / 2017
Amber Products Guide
www.dandrelectronics.com
SYNERGY LIGHTBAR
*
W
E
*N
SAFETY PRODUCTS CATALOG
L
E
D
■ SYNERGY LED Lightbar
■ Available with 6, 12, or 18 High Power LED plug-in modules
■ Deep parabolic reflector optix
■ Built-in Traffic Director
■ Standard Dimmer and Pattern feature
■ Built-in and programmable flash patterns
■ Options available for configuring with IQ Software
■ Flash pattern programs uploadable via USB
■ Amperage draw:
6 LED module - 0.65A / 12 LED module - 1.15A /
18 LED module - 1.75A
■ Operating Temperature: -40°C to +65°C (-40F to +149F)
■ 15 conductor 16 feet harness or DATA Cable when
controlled with D&R controller
■ UV treated polycarbonate lens
■ Screw down lens to base
■ Available colors: Amber, Blue, Clear
■ Single/Dual/Tricolor modules available
■ Full Front Clear Take Downs available
■ Meets all applicable SAE Class1, NFPA and Title XIII
when properly configured
■ Available sizes:
Width - 13”, Height - 2”, Length - 24” / 36” / 48” / 60” / 72”
L
I
G
H
T
B
A
R
S
P a g e 2 • w w w. d a n d r e l e c t r o n i c s . c o m
SAFETY PRODUCTS CATALOG
PROWLER LIGHTBAR
■ Linear 6 or 12 High Power LED
plug-in modules
■ Amperage draw:
WDRF6-X-PL: 0.55 - 0.6 amp
per module
WDRF12-X-PL: 1.1 - 1.2 amp
per module
■ Prowler lightbar combines the best features of LED technology
■ Mounting kits available for most makes and models of vehicles
■ Meets all applicable SAE Class 1 and California Title XIII when
properly configured
■ Can be controlled through any of the standard D&R and other
manufacturer’s switch packs or electronic light control systems
■ 13 conductor 18 feet harness
■ Operating Temperature: -40ºC to +65ºC (-40F to 149F)
■ Flash pattern programs uploadable via USB
■ Exceptionally bright and powerful signal generated by D&R
light modules
■ Optional internal or external auto dim mode for night use
■ Deep parabolic reflector
■ 100% solid state flasher
■ 100% solid state modules
■ Available colors: Amber, Blue, Clear
■ Single or Dual color available
■ Full Front Clear Take Downs available
■ Available sizes: 22” / 35” / 46” / 56” / 66” / 76”
PROWLER MOUNTING OPTIONS
1
2
3
5
4
1. PL22PMT - Permanent Mount, two(2) x 4” tall brackets to
mount mini Lightbars
2. PL22PMM - Permanent Mount, two(2) x 1.75” tall brackets
to mount mini Lightbars
3. PL22MM1 - Magnetic Low Mount kit with four(4) x 3” round
90lb pull magnets and a coil cord with fused power
plug
6
4. PL22PMM2 - Magnetic Medium Mount kit with two(2) x 1.75”
tall brackets, four(4) round 90lb pull magnets and
coil cord with fused power plug
5. PL22PMM3 - Magnetic High mount kit with two(2) x 4” tall
brackets, four(4) round 90lb pull magnets and
coil cord with fused power plug
6. 300-0075 - Prowler Leg Kit, plastic (2 per lightbar), to mount
full size lightbar
P a g e 3 • w w w. d a n d r e l e c t r o n i c s . c o m
L
E
D
L
I
G
H
T
B
A
R
S
SAFETY PRODUCTS CATALOG
MiniTech LIGHTBAR
M
I
N
I
L
E
D
L
I
G
H
T
B
A
R
S
MT-6GT6-CA
MT-4GT6-CA
■ MiniTech Mini LED Lightbars MT-4GT6-CA / MT-6GT6-CA
■ Dimensions: L-17”, W-8.0”, H-2.25” w/o mounting feet
■ Weight: 5lbs w/o mounting feet
■ HD Extruded Aluminum Base
■ Linear LED Light Modules with 6 or 12 Leds
■ 12V / 24V
MiniTech MOUNTING OPTIONS
1
2
1. 400-0200 - Bumper Rubber Lightbar feet
2. Magnetic Mount kit with four round pull magnets
3. Magnetic Mount, medium height mount kit, two(2) x 1.75” tall
brackets (936-0543A) and four(4) round pull magnets
■ Class 1, SAE J845 Certified
■ Operating Temperature: -50ºC to +50ºC
■ Maximum Draw: GT6 Modules - 3.6 Amp
GT12 Modules - 7.2 Amp
■ Available LED Module colors: Amber, Blue, Clear, Blue/Clear
■ Available Lens colors: Amber, Blue, Clear
3
4
4. Magnetic Mount, tall mount kit, two(2) x 4” tall brackets
(936-0544A) and four(4) round pull magnets
PL-22 Mini LIGHTBAR
■ HD Extruded Aluminum Base
■ Clear Polycarbonate Lens
■ LED Light Modules with 6 or 12 LEDs
■ 12V / 24V
■ Max Draw - 6 Amp
■ Class 1 SAEJ845
■ 10 Built in Flash Patterns
■ 100% Solid State Components
■ Operating Temperature: -50ºC to +50ºC
■ Dimensions: L-22”, W-13”, H-2.75”
(w/mounting kit)
P a g e 4 • w w w. d a n d r e l e c t r o n i c s . c o m
SAFETY PRODUCTS CATALOG
BCN24-CA-PL
■ Dual 24 LEDs 12V Beacons with Clear Outer Prowler Lens
■ Amperage Draw: Average: 3.6 Amp / Peak: 7.2 Amp
■ Available colors of beacons: Amber, Blue, Clear
■ 18 Flash Patterns with 2 Simulated Rotating Patterns
BCN24
D&R Electronics LED Beacons feature built-in flashers with
selectable flash patterns.
Specifications:
■ Polycarbonate base and lens
■ Amperage Draw: Average: 1.8 Amp / Peak: 3.6 Amp
■ Operating Voltage: 9.5V - 16V
■ Dimmer Function through wire connection
■ Standard 12V and optional 24V
■ Comes with 3ft straight cable for permanent mount
■ Optional Lighter Plug with dual switch (ON/OFF and Momentary)
and with 15ft straight cable - Part# 215-0183
■ Mounting Options: magnet, mirror mount, truck rack, pipe mount
suction cup mount
■ For Magnet mount order magnet mounting kit#: 499-0003
■ 18 Flash Patterns with 2 Simulated Rotating Patterns
■ Available Models:
BCN24-X (X-Amber, Blue, Clear) with the same Color Lens
BCN24-XC (X-Amber, Blue, Clear with Clear Lens
■ Weight is less then 3lbs
1. DREBLD12A35
■ LED Warning Light
■ Overall Height: 7.0” w/foam
■ Voltage: 10-30VDC
■ LED Color: Amber
■ Dome Color: Amber
■ Comes with 35” long cable
2. DREBLD12A (Not Shown)
■ Overall Height: 7.0” w/foam
■ Voltage: 10-30VDC
■ LED Color: Amber
■ Dome Color: Amber
■ Comes with 4 cond. cable
DREBLD12 BEACONS
1
2
2. DREBLD12PA
■ Overall Height: 7.0” w/foam
■ Voltage: 10-30VDC
■ LED Color: Amber
■ Dome Color: Amber
■ Comes with cigarette light plug
P a g e 5 • w w w. d a n d r e l e c t r o n i c s . c o m
L
E
D
B
E
A
C
O
N
S
SAFETY PRODUCTS CATALOG
T
R
A
F
F
I
C
D
I
R
E
C
T
O
R
S
■ Our Traffic Directors provide clear direction to passing motorists
in an accident zone or construction work zone
■ Some models have the LED lights arranged in the shape of an
arrow on both sides
■ Mounting on various locations including the back of a light bar
or the rear panel of a truck
■ The large number of light emitting diodes used make the LED
Traffic Director easily visible from a very long distance
8 MODULES
TRAFFIC DIRECTORS
■ Traffic Director Kit includes and AS5500 controller (Built-in or
External) and standard 20ft cable
■ Optional cable lengths: 30ft - 100ft
■ Traffic Directors are also available with optional Photo Dimmer
Sensor
■ Available with External Ground Independent Control (AEK models)
■ Available with External Positive Independent Control (PIC models)
■ Custom configurations available upon request
1
2
1. LED-848TD-AEK
2. LED-848TDT-AEK (w/printed arrow tips)
Available colors: Amber, Clear
10 MODULES
■ Left, Right, Center Out and Flash warning patterns
■ Light Intensity Dimmer
■ For Weather Tight option add suffix -WT to a part number
■ Dimensions: W-48”, H-2.0”, D-2.2”
1
2
1. LED-10TD-AEK
2. LED-10TDT-AEK (w/printed arrow tips)
Available colors: Amber, Clear
LINEAR MODULES
■ Left, Right, Center Out and Flash warning patterns
■ Light Intensity Dimmer
■ For Weather Tight option add suffix -WT to a part number
■ Dimensions: W-42.5”, H-2.0”, D-2.2”
MR6F-8TD
■ Max current less than 8A when all modules ON
■ Number of modules - 8
■ Weather Tight, surface mount
■ Available with Ground Independent Control
and Positive Independent Control
■ External Control
■ Standard cable length - 20ft
■ Parabolic Linear Reflector
■ 6 LEDs per module
■ Dimensions: W-33”, H-2.4”, D-3.13”
Available colors: Amber, Clear
P a g e 6 • w w w. d a n d r e l e c t r o n i c s . c o m
SAFETY PRODUCTS CATALOG
TRAFFIC DIRECTORS
1. LED-8/8TD-AEK-WT (split arrowstick)
2. LED-10/10TD-AEK-WT (split arrowstick)
3. LED-20TD-AEK-WT
1
Available colors: Amber, Clear
T
R
A
F
F
I
C
2
3
DIMENSIONS LED-8/8TD-AEK-WT LED-10/10TD-AEK-WT LED-20TD-AEK-WT
WIDTH
19.5”
27.5”
53.4”
HEIGHT
18.5”
18.5”
18.5”
DEPTH
2.5”
2.5”
2.5”
1. 801-0006A/ 936-0014B
Universal Mounting Brackets
2. AGIIIMNTKT
Optional roof mounting kit for D&R Lite Brite
LED Traffic Director.
This kit will also work with all similar style
traffic control devices.
1. AS5500
■ Features include: Left Arrow, Center Out Arrow, Right Arrow
■ Flash: Inside-4/Outboard-2
■ Light Intensity Dimmer
■ Dimension: W-4 3/16”, H-2.5”, D-1.0”
MOUNTING BRACKETS
1
2
CONTROL HEADS
1
2
2. AS55X2
■ Control panel for the operation of two Traffic Directors
mounted on the vehicle (Front/Rear)
■ Operates Dual Traffic Director parallel or independently
■ Dimension: W-4 3/16”, H-2.5”, D-1.0”
P a g e 7 • w w w. d a n d r e l e c t r o n i c s . c o m
D
I
R
E
C
T
O
R
S
SAFETY PRODUCTS CATALOG
ROAD ALERT MESSAGE SIGN
L
E
D
M
E
S
S
A
G
E
S
I
G
N
Road Alert LED text message sign system, displays text and symbolic information.
Solid state LED design ensures durability against road
shock and vibration
providing low maintenance and extended lifespan.
Specifications:
■ CPL (Characters/Line) - 8
■ LED rating - 100,000hrs
■ External mount - Yes
■ Programmable messages - 80
■ Symbols - Yes
■ Fixed message - Yes
■ Scrolling message - Yes
■ Arrow messaging - Yes
■ Controller - RA-USB
■ USB Interface
■ Available colors: Amber, Red
LEDRAT-X-20/LEDRAT-X-40
Available as Kit (including Message Board, Controller and Cables):
RAT-X-20U (20” LED sign, RA-USB ctrl. w/USB touchpad programmable)
RAT-X-40U (40” LED sign, RA-USB ctrl. w/USB touchpad programmable)
DIMENSIONS
WIDTH
HEIGHT
DEPTH
LEDRAT-X-20
20”
4.0”
2.5”
LEDRA-X-40
40”
4.0”
2.5”
RA-USB
The RA-USB controller support maintenance of user messages
using the Road Alert Message Manager (RAMM), a Windows
compatible software interface and loading the message via USB
thumb drive (memory stick), or by directly connecting a USB
keyboard.
Dimensions:
W-3.75”, H-2.25”, D-1.0”
P a g e 8 • w w w. d a n d r e l e c t r o n i c s . c o m
SAFETY PRODUCTS CATALOG
ODYSSEY LIGHTBARS
■ The Odyssey LED sign is a compact lightbar and arrowboard combination
■ The retractable motorized arrowboard / traffic director provides superior visibility in a low profile configuration
■ This patent design gives you the full advantage of a 360-degree lightbar when in lower position
FEATURES:
■ GEN III LED technology
■ Low-profile (3” high) and ‘Easy Swap’ plug and play modules
■ Motorized actuator for easy deployment
■ Compatible with D&R Light Controllers / Light & Siren controllers
■ Mounting kit included
■ Meets SAE Class1 and Title XIII when properly configured
TECHNICAL SPECS:
■ Finish: Enamel
■ Color: White or Black
■ Material: Base-12ga aluminum/ Sign-8ga aluminum
■ Optional Road Alert designed in
1
2
■ Lightbar Modules:
WDR6-X / WDR12-X (X-available colors: Amber, Clear)
Amperage Draw:
WDR6-X: 0.55 - 0.60 Amp per module
WDR12-X: 1.1 - 1.2 Amp per module
Specs for Road Alert built-in Arrow Board:
■ CPL (Character/Line) - 8
■ Programmable messages - 80
■ Text Messaging - Yes
■ Symbols - Yes
■ Fixed/Scrolling Message - Yes
■ Arrow messaging - Yes
MINI ODYSSEY LIGHTBAR
3
1. ODM3-1A Board with One Arrow (12 LED modules in Board)
2. ODM3-2A Board with Two Arrows (16 LED modules in Board)
3. ODM3-1ARA Board with One Arrow and Road Alert (12 LED modules in Board)
Mini Odyssey Dimensions:
Sign Down: W-47 3/4”, D-21 1/4”, H-3.0”
Sign Up Raised Height: 19 7/8”
ODYSSEY
2
1
3
1. OD3-1A Board with One Arrow (16 LED modules in Board)
2. OD3-2A Board with Two Arrows (24 LED modules in Board)
3. OD3-1ARA Board with One Arrow and Road Alert (16 LED modules in Board)
Mini Odyssey Dimensions:
Sign Down: W-47 3/4”, D-28 1/4”, H-3.0”
Sign Up Raised Height: 26 7/8”
ODYSSEY OTHER MODELS
OLBW-RA40-A
Odyssey Lightbar with Road Alert Sign
ODM3B55-25C
Odyssey Lightbar w/Full Chevron Board
Size of the Board 30”x60”
ODM3-RA Mini Odyssey Lightbar
(Board with build-in Road Alert Sign)
P a g e 9 • w w w. d a n d r e l e c t r o n i c s . c o m
L
I
G
H
T
B
A
R
/
F
L
I
P
U
P
B
O
A
R
D
SAFETY PRODUCTS CATALOG
MANUAL FLAPS - 46069
A
R
R
O
W
B
O
A
R
D
S
W
/
F
L
A
P
S
■ The Arrow Board is a rugged, aerodynamically advanced
Traffic Control System suited for multipurpose applications
■ The model is moisture-proofed in the manufacturing process
■ One On/Off Toggle Switch with Protective Rubber Boot
■ One 30ft SJO Power/Ground Cable with Power Plug
■ 3M Type III TC12 Reflective background
■ Eight D&R PAR36-40A Sealed Light Modules with 40
High-Intensity Amber LED’s
■ Dimensions: W-30”, H-24”, D-1.5”
■ Max Amperage Draw: <1.5 Amp
MANUAL FLAPS - AB253513KHT-MF
■ HD formed/welded aluminum arrowboard module with
semi-gloss black powder coated finish on all sides
■ Orange Hi-Intensity retro-reflective material on the face and
flaps
■ Thirteen (13) D&R HD rubber grommet mounted sealed light
modules
■ Three (3) 3/8” mounting points in each end of the
arrowboard module allowing for installation on a variety of
vehicles as well as various locations on vehicles
■ Enclosed solid state circuit board
■ Arrowboard functions by use of the mechanical flaps:
Left Arrow/Right Arrow/Center Out/Bar
■ Dimensions: W-35.25”, H-30.50”
TC-12 NON-FREE WAY USE
ELECTRONIC FLAPS
1
2
1. ERT306014KHT-FL Motorized Rack
2. ER306014KHT-FL Motorized Roof Rack
Specifications:
■ Enclosed aluminum module
■ 175lb Heavy duty actuator with quick release
■ 3M Type III TC12 Reflective background
■ 14 D&R PAR36-40A Sealed Light Modules with 40 High-Intensity Amber LED’s
■ Standard 20ft cable (optional lengths are available)
■ Input Voltage: 12V
■ Amperage Draw:
Less than 2Amp
During the opening and closing process, the draw is less than 8 Amp
■ Electronic Patterns:
Left Arrow/Right Arrow/Center-Out Arrow/Bar Mode
■ Arrowboard Dimensions:
W-60”, H-32 7/16”
■ Arrowboard w/Motorized Rack Dimensions (ERT306014KHT-FL):
W-70 1/8”, H-53 15/16”
■ Arrowboard w/Motorized Box Mount Dimensions(ER306014KHT-FL):
W-70 18”, H-53 15/16”, D-28”
P a g e 1 0 • w w w. d a n d r e l e c t r o n i c s . c o m
SAFETY PRODUCTS CATALOG
■ ER306015 is a motorized roof rack for AB306015 arrowboard
■ This unit has the Auto-Up & Auto-Stop functions
■ Arrowboard Dimensions:
W-60”, H-30”
■ Arrowboard with Rack Dimensions:
W-62 1/2”, D-38 1/4”
H(when open)-31 5/16”
H(when closed)-9 1/2”
■ Amperage Draw: Max <2.5 Amp
■ ER305015/ER305022 is a motorized roof rack for AB2000 and
Ab2220 arrowboard
■ This unit has the Auto-Up & Auto-Stop functions
■ Arrowboard Dimensions:
W-50”, H-30”
■ Arrowboard with Rack Dimensions:
W-52 1/2”, D-38 1/4”
H(when open)-31 5/16”
H(when closed)-9 1/2”
■ Amperage Draw:
DRPAR36LED - Max < 2.5 Amp
ROOF MOUNT - ER306015KH
ROOF MOUNT - ER305022K
ROOF MOUNT - ERL306015KHT
■ Enclosed aluminum arrowboard module with 175lb heavy duty
actuator and quick release
■ Auto-Up & Auto-Stop functions
■ Special feature-rack built with lightbar mounting base
Note: Lightbar sold separately
■ Arrowboard Dimension:
W-60”, H-30”
■ Arrowboard with Rack Dimension:
W-64”, H(when open)-40 3/16”, H(when closed)-17”
■ Max Amperage Draw: < 2.5 Amp
ROOF MOUNT - ERL306022K
■ Enclosed aluminum arrowboard module - Chevron Style
with 175lb heavy duty actuator and quick release
■ Auto-Up & Auto-Stop functions
■ Special feature-rack built with lightbar mounting base
Note: Lightbar sold separately
■ Arrowboard Dimension:
W-60”, H-30”
■ Arrowboard with Rack Dimension:
W-64”, H(when open)-40 3/16”, H(when closed)-17”
■ Max Amperage Draw: < 3.5 Amp
P a g e 1 1 • w w w. d a n d r e l e c t r o n i c s . c o m
A
R
R
O
W
B
O
A
R
D
S
SAFETY PRODUCTS CATALOG
A
R
R
O
W
B
O
A
R
D
S
ARROWBOARDS
■ Use of rubber grommet makes our LED light modules weather
resistant
while allowing it to withstand all weather use and endure
punishment created by high speeds or rough terrain
■ Arrowboards include AS5500 or AS55X2 controller (shown on
page 7)
■ Made of durable light weight aluminum and powder coated on
all sides
■ Available with Auto-Dimmer option
■ Custom configurations available upon request
1
2
3
4
1. AB2100
Dimensions: W-49 7/16”, H-23 15/16”
Max Amperage Draw: < 2.5 Amp
2. AB2102
Dimensions (each side): W-24 13/16”, H-23 13/16”
Max Amperage Draw: < 1.2 Amp
3. AB2110
Dimensions: W-54”, H-16”
Max Amperage Draw: < 1.5 Amp
4. AB253513
Dimensions: W-35”, H-25 1/2”
Max Amperage Draw: < 2.0 Amp
5. AB305022 Chevron Style
Dimensions: W-50”, H-25 1/2”
Max Amperage Draw: < 3.5 Amp
5
ARROWBOARD LIGHT MODULE
PAR36-40A
■ Clear lens and Amber LED’s
■ 40 LED’s
■ Amp draw: 0.48 Amp
184-0016
■ Grommet Light Mount
P a g e 1 2 • w w w. d a n d r e l e c t r o n i c s . c o m
SAFETY PRODUCTS CATALOG
GENESIS LIGHTS
1. GTS12-X (Surface Mount)
Dimensions: W-4.75”, H-1.21”, D-1.18”
2. GTD12-X (Deck Mount)
Dimensions: W-4.00”, H-1.30”, D-1.15”
3. GTF12-X (Flush Mount)
Dimensions: W-4.75”, H-1.10”, D-1.35
1
■ These compact modules provide great versatility for a wide range of mounting
■ Surface, Flush or Deck mount LED flashing modules
■ All modules are gasket sealed, waterproof for external mounting applications
■ Multiple flash patterns built-in
■ Synchronous or alternate operation
■ Each module has 12 led
■ Input Voltage: 12-24 VDC Nominal
■ Available colors:
Single colors:
2
L
E
D
3
Dual colors:
L
I
G
H
T
S
AVAILABLE BRACKETS
(Must use the GTD Lights for the following brackets)
1. 936-0521A - Surface Mount L Bracket, 2” Tall
2. 936-0522A - Surface Mount L Bracket, 4” Tall
3. 936-0523A - Surface Mount L Bracket, 2” Tall Double
4. 936-0524A - Surface Mount L Bracket, 4” Tall Double
5. 936-0525A - Surface Mount L Bracket, 2 Units Stacked
6. 936-0518A - Double Stacked DRCS110 Mount (not shown)
1
2
3
4
P a g e 1 3 • w w w. d a n d r e l e c t r o n i c s . c o m
5
SAFETY PRODUCTS CATALOG
GENESIS LIGHTS
L
E
D
L
I
G
H
T
S
936-0570A w/2xGTF12
■ Dual Flush Mount Housing
■ Available in two colors:
936-0570A - White
936-0570B - Black
■ All light modules are gasket sealed, waterproof for
external mounting applications
■ Multiple flash patterns built-in
■ Synchronous or alternate operation
■ Each module has 12 led
■ Input Voltage: 12-24 VDC Nominal
■ Available colors:Amber, Blue, Clear
■ 936-0570 Dimensions: W-5.0”, H-1.0”, D-3.25”
MR6FB LIGHTS
1. MR6FB-X Surface Mount 6 LED’s Module
Dimensions: W-3.25”, H-1.25”, D-1.1”
2. MR6FBF-X Flush Mount 6 LED’s Module
Dimensions: W-3.25, H-1.5”, D-1.0”
1
2
■ MR6FB LED modules utilize the latest in 1W LED technology
■ Ideally suited for use in directional warning solutions
■ These compact modules provide great versatility for a wide range of
mounting options
■ All modules are sealed, waterproof for external mounting applications
■ Multiple flash patterns built-in
■ Available models:
MR6FB-X SINGLE COLOR
MR6FB-X/X DUAL COLOR
X-LED Color: A-Amber, B-Blue, C-Clear
■ Current Draw: 0.4A Solid ON
0.160A Average Pattern ON
■ Input Voltage: 12-24 VDC Nominal
■ Synchronous or alternate operation
1
4
2
5
P a g e 1 4 • w w w. d a n d r e l e c t r o n i c s . c o m
3
6
SAFETY PRODUCTS CATALOG
WINDSHIELD LIGHT
MR6-WL
■ Designed to fit as a center mount above the rear view mirror
■ Dual or split module
■ Multiple flash patterns
■ Low profile, lightweight
■ Extremely discrete and non-intrusive
■ Dimensions: W-3.8”, H-1.3”, D-1.6”
■ Available colors: Amber, Blue, Clear
1. SL6IL-X
Dimensions: Base Diameter-1.50”, H-1.25”
LED Elements-6, Ultra Small
LED INSERT LIGHTS
1
2
2. SL6IL-2KIT-X
3. SL12IL-X
Dimensions: Base Diameter-1.50”, H-0.8”
LED Elements-12, Ultra Small
■ Virtually No RFI/EMI noise emitted
■ Meets SAE J1113-41 Class 5
■ Compact In-Line Controller and synchronization units
■ Includes synchronize feature for alternating and synchronous
flashing of multiple lamps
■ Die-Cast aluminum base
■ Available colors: Amber, Blue, Clear
■ Encapsulated for moisture and synchronization units
■ Safe Low Voltage Wiring
■ Includes Pre-Wired 10’ cable
■ Over 30 Flashing Patterns
1. DRLED-27W
LED Power: 27 Watt Epistar LED
9x3W High Intensity LEDs
Current Draw: 2.25A@12V, 1.13A@24V
Dimensions: 4.33”x2.44”x5.31”
Operating Temperature: -40°C to +85°C
Light Output about 2150 lumen
2. DRLED-48W
LED Power: 48 Watt Epistar led
16x3W High Intensity LEDs
Current Draw: 3.92A@12V, 1.95A@24V
Dimensions: 4.33”x2.83”x4.33”
Operating Temperature: -40°C to +60°C
Light Output about 3500 lumen
Specs for both models:
■ Operating Volt: 10-30 Volt DC
■ Waterproof rate: IP67
■ Lens: PMMA LENS
■ Material: diecast aluminum housing
■ Housing color: Black
■ Mounting Bracket: stainless steel bracket
■ About 30,000 hours life time
■ Available colors: Amber, Blue, Clear
3
WORK LIGHTS
1
2
P a g e 1 5 • w w w. d a n d r e l e c t r o n i c s . c o m
L
E
D
L
I
G
H
T
S
SAFETY PRODUCTS CATALOG
SCENE LIGHTS
1
1. 5M6183L
■ Operating Voltage: 10-30 VDC
■ Operating Temperature: -40˚C to +60˚C
■ Waterproof
■ Spot Beam, Flood Beam
■ Diecast aluminum housing, stainless steel bracket
■ Housing color: Black
■ Dimensions: W-5.9”, H-2.2”, D-2.46”
2
L
E
D
L
I
G
H
T
S
DOME LIGHTS
1
2. 5M6081-40B
■ Operating Voltage: 10-40 VDC
■ Operating Temperature: -40˚C to +80˚C
■ Waterproof
■ Beam:
60” Flood Beam, 30” Spot Beam optional
■ Diecast aluminum housing, stainless steel bracket
■ Housing color: Black
■ Dimensions: W-5.5”, H-3.1”, D-4.4”
1. 183-0003PB
■ Surface mount
■ Plastic translucent lens snaps onto aluminum base of
corrosion free service
■ Durable 12 Volt interior dome light with switch for bright,
general illumination
■ Single lead wire for electrical connection, ground through
mounting screw
2
2. 183-0013
■ Surface mount
■ Dome light, dual mode with Clear Bulb and Red LED’s
LED MAPLIGHT
CA-0128 / CA-0129 / CA-0130
■ Available in: 6”, 12” and 18” lengths
■ 3 Phase light intensity 1 Watt LED (Low, Medium, High)
■ Available in 12 /24V
■ 280 degree Turning Radius
■ 1 Watt Red and White LED
■ USB plug option available:
CA-0128-USB, CA-0129-USB, CA-0130-USB
P a g e 1 6 • w w w. d a n d r e l e c t r o n i c s . c o m
*
W
E
*N
SAFETY PRODUCTS CATALOG
■ 6 Available switches with backlight, microprocessor controlled
■ 6 Available outputs
■ Individual interchangeable labels for switch
■ SW1 Programmable as MASTER switch
(ON/OFF switch only if not used as MASTER)
■ SW2 TO SW6 Programmable as ON/OFF(factory default),
Momentary or Timer (9sec)
Specifications:
■ Input Voltage: 11 to 16VDC
■ Operating Temperature Range: -30°C to +65°C
■ Maximum Current per Output Terminal: 15Amp
SP6200
■ Maximum Combined Current per System: 40Amp
■ Supplied with a standard U-bracket
■ Dimensions: W-5 3/4”, H-1.5”, D(Top)-3 5/8”
PROTEC 1350
■ Microprocessor based Protec Light control unit is designed for light to
medium duty use
■ Eight illuminated push buttons, programmable to selected outputs
■ Fully Backlit / Light alert
■ Rubberized membrane switch cover
■ Operates one or two 100-watt speakers
■ All functions are programmed via simple built-in program mode
■ No fuses to replace, all outputs are via self protecting solid state relays
■ Dimensions:
Remote Control Head: W-2.375”, H-4.43”, D-1.0”
Main Unit: W-6.66”, H-2.45”, D-6.44”
ENFORCER 6100
■ Basic electronic air horn / P.A. radio broadcast with hard-wired
microphone.
■ InputVoltage: 11 to 16 Volts DC
■ Input Fuse: 20 Amps (external)
■ Operating Temperature Range: -30°C to +65°C
■ Current Standby/Operating: 50mA +10%/10 Amps
■ Dimensions: W-6.25”, H-2.5”, D-7.5”
100 W SPEAKERS
1. DRCS100
■ One of D&R’s most innovative cast 100 W speakers
■ Includes bail bracket
■ Exceeds Class A SAE J1849 requirements
■ Dimensions: W-6.5”, H-5.375”, D-3.0”
2
2. DRCS110
■ All weather nylon composite black housing with front
loaded 100W speaker driver
■ Exceeds Class A, SAE J1849 requirements
■ Dimensions: W-6.85”, H-6.35”, D-2.78”
P a g e 1 7 • w w w. d a n d r e l e c t r o n i c s . c o m
1
C
O
N
T
R
O
L
S
Y
S
T
E
M
S
/
S
P
E
A
K
E
R
S
SAFETY PRODUCTS CATALOG
1
P
O
W
E
R
M
A
N
A
G
E
M
E
N
T
WATCHDOG
1. Watchdog-B60
2. Watchdog-B120
These units are designed to protect the car battery from excessive discharge, when the ignition is off.
Between 13V to 18V the output of the Watchdog will be ON unconditionally.
If the battery voltage drops below 13V and the ignition is OFF, the watchdog will commence
a predetermined countdown delay at the end of which the unit will shut-off and go into “STANDBY”
mode. This delay is set by the 4 DIP switches on the watchdog. If the battery voltage recovers and is
raised above 13V, the countdown process will cease and the Watchdog will go into “ON” mode. The
delay time is set by the DIP switch and depending on the DIP switch settings, the car loads connected
to this unit’s output will run for the set time even after the ignition is turned off.
SPECIFICATIONS
■ Operating Voltage: 9V - 18V
■ Low Voltage Disconnect: 11.5V *
■ High Voltage Disconnect: 18V
■ Stand-by Current: 8 mA
■ Operating Current: 350 mA+LOAD
■ Max. Load Current (with correct gauge wire)
Watchdog-B60: 60A
Watchdog-B120: 120A
2
■ Min.Time Delay: 2 min.
■ Override Time Delay: 2 min..
■ Selectable Time Delay: 2 min.-13hrs.
*Note: Voltage disconnect (threshold voltage)
is where the watchdog takes action.
The operating voltage is the range where
watchdog monitoring circuit operates
regardless of the action taken by the
watchdog.
POWER DISTRIBUTION UNITS
The Power Distribution Units allow for elimination of long wasteful wire runs in public safety vehicle builds.
Each fused output has a red LED to indicate a blown circuit fuse or equipment problem. The timed outputs provide the ability for
automatic shutdown of devices by a user selectable timing circuit of 2-minutes to 13-hours (after ignition key removed).
This will allow for vehicle left with mobile radios, modems, computers to shut down power before causing the battery to be run
dangerously low.
■ Organizes vehicle wiring runs
■ Visual condition of circuits
■ All power connections at one central location
■ Makes a safer electrical connection to vehicles
■ Provides direct power, ignition power and timed power
■ Built-in battery Watchdog (battery discharge protector)
■ Easy installation, easy connection of accessory equipment
■ Fast and reliable vehicle installations
PDU42WB
PDU14-K
PDU-8S
GENERAL INFORMATION ABOVE, FOR DETAILS
ON EACH MODEL, VISIT OUR WEBSITE
P a g e 1 8 • w w w. d a n d r e l e c t r o n i c s . c o m
PDU42YRP
SAFETY PRODUCTS CATALOG
SRC9
■ 9” console with a 40 degree down slope
■ Allows for mounting up to 3 pieces of equipment
■ Designed to fit close to the dash of a car or SUV
■ Includes 3 faceplates
SRC11S
■ Mid-sized console
■ Allows for mounting up to 3 pieces of equipment
■ Designed to fit between the bucket and bench seat
configuration
■ Includes 3 faceplates
■ Available for Vans - model SRC11RV (height
increased by 4”, no slope)
SRC11RV
■ SRC11RV console designed to fit Vans and Large
Trucks
■ Capable of holding 3 pieces of equipment
■ Includes 3 faceplates
SRC14RS
■ 14” console
■ Allows for mounting up to 4 pieces of equipment
■ Front to rear sloped profile
■ Includes 4 faceplates
SRC14RV
■ SRC14RV Console designed to fit Vans and large
trucks
■ Allows for mounting up to 4 pieces of equipment
■ Includes 4 faceplates
P a g e 1 9 • w w w. d a n d r e l e c t r o n i c s . c o m
C
O
N
S
O
L
E
S
SAFETY PRODUCTS CATALOG
C
O
N
S
O
L
E
S
SRCSUV
■ SRCSUV is an 18-inch console with a to rear sloped profile and side compartment on passenger side
■ Allows for mounting 5 or 6 pieces of equipment
■ This console is specifically designed to accommodate the larger sport utility vehicles such as the Tahoe,
Suburban and Expedition
■ 801-0028B is an optional side compartment to be mounted on driver side
901-0135A
901-0124A
■ 901-0135A Contoured Console designed for F150
■ Allows for mounting up to 5 pieces of equipment
■ Armrests and LT7600 are sold separately
■ 901-0124A Contoured Console designed for Dodge Ram
■ Allows for mounting up to 5 pieces of equipment
P a g e 2 0 • w w w. d a n d r e l e c t r o n i c s . c o m
SAFETY PRODUCTS CATALOG
901-0063A
■ Square console with pedestal & sliding tray
■ Dimensions: L-19”, H-12”
■ Computer mount (sold separately)
901-0063B
■ Square console with pedestal & sliding tray
■ Computer mount (sold separately)
*** Inverter & Modem not included ***
901-0064A
■ Square console with pedestal & sliding tray
for Frightliners & Sterlings
■ Dimensions: L-18 1/2”, W-14 1/2”, H-16 1/8”
P a g e 2 1 • w w w. d a n d r e l e c t r o n i c s . c o m
C
O
N
S
O
L
E
S
SAFETY PRODUCTS CATALOG
C
O
N
S
O
L
E
S
/
F
L
O
O
R
P
L
A
T
E
S
■ Console designed for Ford F150 4 Door Cab
■ Dimensions: L-26.15”, H-13.61
901-0109A
901-0051A
■ Console with latching door and cup holder
■ Dimensions: W-17”, H-10”, D-10”
FLMNT-29/29W/36/38
The floor plate kit uses D&R leg kit system which anchors to the
factory seat bolts, eliminating the need for drilling holes in the floor.
This format provides versatility in mounting any combination of
console and laptop mounts in different vehicles types.
The leg kits are vehicles specific.
P a g e 2 2 • w w w. d a n d r e l e c t r o n i c s . c o m
SAFETY PRODUCTS CATALOG
STORAGE BOXES
1
1. 934-0056A
■ Manufactured out of 14ga steel
■ Black epoxy finish
■ Heavy duty latch
■ Dimensions: W-19.5”, H-14”, D-13.5”
2
2. 934-0028A
■ Hold regular size file folders
■ Dimensions: W-20”, H-14”, D-13.25”
POWER OUTLETS
1. CA-0101
■ Dual outlet 12V power accessory
■ Individually switched,fused and backlit
■ 15 Amp max per output
2
1
2. 14.0553
■ Triple outlet 12V power accessory w/lighter plug
■ 15 Amp max per output
3. CA-0103
■ Triple outlet 12V power accessory
■ Dimensions: L-8.0”, W-3.5”
■ CA-0103S Dim: L-8.0”, W-1.5”
4
3
TSCR101
4. TSCR101
■ Dual USB Charger
5. CA-0107LS
■ Dual cupholder (one regular size cup and one large cup)
■ Dimensions: L-4.25”, W-8.0”
6
5
6. CA-0107
■ Dual cupholder (regular cup size)
■ Dimensions: L-3.5”, W-8.0”
7. 904-0148A (Mounts to Floor plate)
■ Single Large cupholder
■ Dimensions:L-4.31”, H-3.31”
8. CA-0117L (Mounts to Floor plate)
■ Dual cupholder w/two large cups
■ Dimensions: L-5.69”, W-8.56”
9. CA-0117 (Mounts to Floor plate)
■ Dual cupholder with two regular cup size
■ Dimensions: L-4.88”, W-8.0”
7
8
9
P a g e 2 3 • w w w. d a n d r e l e c t r o n i c s . c o m
C
O
N
S
O
L
E
A
C
C
E
S
S
O
R
I
E
S
SAFETY PRODUCTS CATALOG
C
O
N
S
O
L
E
A
C
C
E
S
S
O
R
I
E
S
1
STORAGE POCKETS
2
1. CA-0104
■ Storage Pocket
■ Design to mount in console
■ Dimensions: L-3.5”, W-8.0”, H-6.25”
4
3
1
ARMRESTS
2. CA-0104M1
■ Storage Pocket
■ Design to mount in console
■ Dimensions: L-7”, W-8.0”, H-6.25”
3. CA-0105
■ Storage Pocket
■ Design to mount in console
■ Dimensions: L-3.5”, W-8.0”, H-3.0”
4.CA-0105M1
■ Storage Pocket
■ Design to mount in console
■ Dimensions: L-3.5”, W-8.0”, H-6.0
2
3
1. 904-0123A
■ Console mount Armrest w/D&R logo pad
2. 904-0128A
■ Floormount Armrest w/D&R logo pad
3. 904-0135A/B
■ Soft molded rubber Side mounting console
armrest. Driver side
■ 904-0136A/B Passenger Side
4
5
6
4. CA-0115
■ Adjustable armrest
■ Mounts to rear of console
5. CA-0116
■ Adjustable armrest w/slide-out note pad
■ Mounts to rear of console
6. CA-0118
■ Adjustable armrest w/slide-out note pad
■ Secures to equipment floor mounting plate
7. CA-0119
■ Adjustable armrest w/slide-out note pad
■ Secures to equipment floor mounting plate
7
8
9
8. CA-0124
■ Adjustable armrest w/rear mounted clip
board holder
9. CA-0211
■ Printer Armrest designed to enclose and
protect the PocketJet printer & paper spool
■ Compact and ideally suited to mount in the
confined space between the driver and
passenger seats of all mid and full sized
vehicles
■ CA-0210 is same as CA-0211 but mounts to
the back of the D&R console
Printer not included.
P a g e 2 4 • w w w. d a n d r e l e c t r o n i c s . c o m
SAFETY PRODUCTS CATALOG
LT5201
■ Laptop mount with bearing detent allowing it to
swivel 80 degrees to passenger and driver
■ Designed to fit larger SUV’s or Pickup’s
LT5300
■ Laptop mount designed to fit most vans and trucks
■ Height adjustment from 11.25” to 17.50”
■ LT6600 Passenger Side Mount connects to the passenger seat bolts
■ Full featured computer mount with height, tilt, dual 360 swivel and extension adjustments
■ Utilizes laser cut swivel components to provide a compact unit ideal for small to full size cars
and SUV’s
■ The LT6600 accepts all D&R laptop or MDT specific trays and universal trays
■ Height Adjustment
LT6600-A from 13.5”-21.5”
LT6600-B from 17.5”-30.0”
LT6600-E from 9.5”-13.5”
LT6600-F,G,K from 21.5”-37.0”
■ Extension Adjustment allows the user to tilit move the computer towards or away from their
reach to a comfortable working position (12”-16”)
■ Various kits are available depending on the make, model year
■ All mounts include braces for mount support
LT66MK FOR
DODGE RAM 1500
LT66MK FOR
DODGE DURANGO SSV
LT66MK FOR
FORD F150
LT6600 SERIES
L
A
P
T
O
P
M
O
U
N
T
S
LT66MK FOR FORD
TRANSIT CONNECT
* CONTACT YOUR SALES REPRESENTATIVE TO DETERMINE WHICH MOUNTING KIT WILL
FIT YOUR NEED
P a g e 2 5 • w w w. d a n d r e l e c t r o n i c s . c o m
T
R
A
Y
S
/
P
O
R
T
R
E
P
L
I
C
A
T
O
R
S
SAFETY PRODUCTS CATALOG
UNIVERSAL LAPTOP TRAY
907-0103B
■ Universal locking tray with thin finger
■ Ability to lock the laptop in place using a key lock
■ Uses side mount fingers to secure the laptop in place
■ The tray is adjusted to fit the laptop and tightened when properly adjusted
■ Available for 14+ sized laptops (Part#: 907-0151C)
■ Available for small sized laptops 10”-12” (Part#: 907-0236A)
* D&R OFFERS LOCKING TRAYS FOR SPECIFIC LAPTOP COMPUTERS.
CONTACT YOUR SALES REPRESENTATIVE FOR DETAILS *
PORT REPLICATORS
1
2
1. Panasonic CF-19
■ Rugged steel with black powder coat finish
■ Lockable keyed alike
■ Fan cooling for laptop bottom
■ Pre-drilled holes aligned for use on all D&R mounts
2. Panasonic CF30/CF31
■ Rugged steel with black powder coat finish
■ Lockable keyed alike or optional master keyed
■ Pre-drilled holes aligned for use on all D&R mounts
3. Panasonic G1 DOCK
■ Slim Design
■ Lockable
■ Spring loaded user friendly operation
■ Provision for smart card reader attachment
■ With external power supply
3
*FOR LIST OF AVAILABLE DOCKING STATIONS, PLEASE CONTACT YOUR SALES REPRESENTATIVE *
COMPUTER POWER SUPPLY
DS100-15.6V Power Supply
■ Compact Size: L-6.0”, D-2.25”, H-1.0”
■ Output is -15.6V DC
■ Input is -6V to +24V DC
■ Optional Universal DC I/P Power Supply Internal:
Direct wired to PCB External (as shown)
■ Maximum power consumption <90W
■ Output short circuit protection with current and voltage fold-back
■ Red Power ON LED indicator
P a g e 2 6 • w w w. d a n d r e l e c t r o n i c s . c o m
SAFETY PRODUCTS CATALOG
DODGE SPRINTER STORAGE SYSTEM
934-0376A
TS-01
Maximize and organize space while protecting our valuables with the TRUCK-STOR
storage system. Locking slide-out drawer give you quick, easy access to your valuable
equipment, tools and supplies. Designed and developed in partnership with agencies
across Canada & USA.
Truck-Stor provides a flexible, affordable storage solution for Emergency,
Enforcement and Utility vehicles.
Standard Features:
■ Lightweight aluminum welded construction to reduce vehicle load
■ Reinforced base and top supports heavy loads
■ Finished in a hard black epoxy paint
■ Heavy duty paddle lock and large handle makes it easy to open and close
(Combination lock optional)
■ Heavy duty ball bearing slides for smooth operation
■ Tie-down points around top of cabinet for securing extra load
■ Dividers and partitions allow easy re-configuration of compartments
■ Available in different sizes to fit all popular SUV’s, Vans and Trucks
4 DRAWER STORAGE SYSTEM
934-0233A
CONTACT YOUR SALES REPRESENTATIVE FOR YOU CUSTOM IN-VEHICLE STORAGE SYSTEM
P a g e 2 7 • w w w. d a n d r e l e c t r o n i c s . c o m
S
T
O
R
A
G
E
S
Y
S
T
E
M
S
SAFETY PRODUCTS CATALOG
S
T
O
R
A
G
E
S
Y
S
T
E
M
S
934-0283A
934-0584A
934-0598A
CONTACT YOUR SALES REPRESENTATIVE FOR YOU CUSTOM IN-VEHICLE STORAGE SYSTEM
P a g e 2 8 • w w w. d a n d r e l e c t r o n i c s . c o m
SAFETY PRODUCTS CATALOG
TRUCKBED STORAGE WITH SLIDE OUT DECK ON TOP
SLIDE-OUT CARGO UNIT ILLUSTRATED WITH OPTIONAL “E”TRACKS
AND CARGO STRAPS
934-0328A
4 DRAWER SLIDE OUT STORAGE SYSTEM
934-0749A
934-0315A
934-0295A
SINGLE DRAWER WITH DUAL SLIDE OUT TRAY
CONTACT YOUR SALES REPRESENTATIVE FOR YOU CUSTOM IN-VEHICLE STORAGE SYSTEM
P a g e 2 9 • w w w. d a n d r e l e c t r o n i c s . c o m
S
T
O
R
A
G
E
S
Y
S
T
E
M
S
P
A
R
T
I
T
I
O
N
S
/
W
O
R
K
C
E
N
T
E
R
S
SAFETY PRODUCTS CATALOG
CARGO PARTITIONS
Cargo partitions to fit most North American Commercial/Cargo Style Vans and SUV’s.
The Van cargo partitions are available in three different configuration:
■ #1- solid one piece. Completely blocking the cargo area from the front seat
■ #2- two piece. Guarding the back of the passenger and drivers seats
■ #3- one piece. Center sliding door allowing access to the rear of the van from the
front seat area.
The partitions use a square steel lower section and expanded steel wire mesh upper
section. All of the partitions have a durable powder coat finish.
WORK CENTER SOLUTION FOR VAN
934-0600A
EXTENDED STORAGE AND WORK CENTER FOR CHEVY EXPRESS
934-0506A
EXTENDED STORAGE AND WORK CENTER FOR E-250 VAN
P a g e 3 0 • w w w. d a n d r e l e c t r o n i c s . c o m
SAFETY PRODUCTS CATALOG
1
1. 178-0010
Mini Rocker switch
ACCESSORIES
2
3
2. 178-0019
Toggle Switch
3. 178-0025
Protective boot for 178-0019
4. 183-0002
Fuse Panel
5
4
6
5. 183-0008
Resettable Circuit Breaker, 50Amp.
Available in 80amp & 100Amp
6. 300-0016
Waterproof Cable Grommet, Mini 5/16” I.D.
7. 184-0001
Waterproof Cable Grommet, Small 1/2” I.D.
7
8
10
11
12
14
15
9
8. 184-0002
Waterproof Cable Grommet, Medium 3/4” I.D.
9. 184-0003
Waterproof Cable Grommet, Large 1” I.D.
10. 184-0034
Waterproof Cable Grommet, 90 Deg.
11. 300S
Road Flare Tube, holds up to 4 flares
12. 208-9912
Lightbar Cable, 13 Wire w/Black Jacket
8/18 - 2/16 - 2/14 - 1/8
13. 147TX
2 1/2lb Fire Extinguisher w/bracket (available in chrome)
13
14. B500T
5lb Fire Extinguisher shown with 807 Heavy Duty Mnt.Bkt
(available in chrome)
15. 807
Heavy duty Mounting Bracket
16. 183-0004
Coil Cord with cigarette lighter plug
17. 215-0183
Lighter Plug dual switch (ON/OFF & Momentary)
& 15’ straight cable
16
17
18. BA42102A
Back-up Alarm, Self-adjusting volume 77-102db, 12-24V,
Universal Mounting W-4”, H-2 5/8”, D-1 5/8”
P a g e 3 1 • w w w. d a n d r e l e c t r o n i c s . c o m
18
A
C
C
E
S
S
O
R
I
E
S
D&R ELECTRONICS CO.LTD
8820 GEORGE BOLTON PKWY.
BOLTON, ONTARIO L7E 2Y4 CANADA
TEL: 905-951-9997 / FAX: 905-951-0019
TOLL FREE: 1-800-538-7338
www.dandrelectronics.com