40V BRUSHLESS BLOWER / VAC
24222
Some Greenworks Lithium-Ion products are
sold with or without battery and charger.
Owner’s Manual
TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757)
www.GreenWorksTools.com
Read all safety rules and instructions carefully before operating this tool.
CONTENTS
general safety rules
Contents............................................................................................................................... 2
Product specifications........................................................................................................... 2
General safety rules..........................................................................................................3-5
WA R N I N G
Read and understand all instructions before using this product. Failure to follow all
instructions listed below may result in electric shock, fire, and/or serious personal injury.
Symbols............................................................................................................................. 6-7 .
Know your blower................................................................................................................. 8
Assembly instruction........................................................................................................... 9 -11
Operation........................................................................................................................12-16
Maintenance...................................................................................................................17-18
Environmentally safe battery disposal....................................................................................19
Troubleshooting..................................................................................................................20
Warranty..................................................................................................................21
Exploded View........................................................... ...........................................................22
Parts List............................................................................................................................ 2 3
Notes.................................................................................................................................. 24
•Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
•Do not allow children or untrained individuals to use this unit.
•Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
•Store indoors.
•Do not handle plug or tool with wet hands.
•Never allow children to operate the equipment. Never allow adults to operate the equipment
without proper instruction.
•Always wear safety glasses with side shields that comply with ANSI Z87.1. Everyday glasses
have only impact resistant lenses. They are NOT safety glasses. Following this rule will
reduce the risk of eye injury. Use face mask if operation is dusty.
•Secure long hair above shoulder level to prevent entanglement in moving parts.
PRODUCT Specifications
•Use extra care when cleaning on stairs.
•Keep hair, loose clothing, fingers and all body parts away from openings and moving parts.
•Do not operate in poor lighting.
40V BRUSHLESS BLOWER
Type............................................................................................. Cordless, battery-operated
Motor............................................................................................................................... 40 V
Air volume....................................................................................................................340 CFM
•Wear heavy long pants, boots, and gloves. Avoid loose garments and jewelry that could get
caught in moving parts of the machine or its motor.
•Do not force tool. Use the correct tool for your application. The correct tool will do the job
better and safer at the rate for which it is designed.
Mulch ratio..................................................................................................................................10:1
•Do not operate the equipment while barefoot or when wearing sandals or similar lightweight
footwear. Wear protective footwear that will protect your feet and improve your footing on
slippery surfaces.
Collection bag capacity.............................................................................................1.2 Bushel
•Keep firm footing and balance. Do not overreach. Overreaching can result in loss of balance.
Weight ............................................................................................................................9.92 lbs
•Do not allow to be used as a toy. Close attention is necessary when used by or near children.
Air speed (Max)............................................................................................................185 MPH
•Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the
switch is dangerous and must be repaired.
* For use with 40V 4Ah (146 Wh) battery only.
•Keep all bystanders, children, and pets at least 50 ft. away.
•Do not operate this unit when you are tired, ill, or under the influence of alcohol, drugs, or
medication.
•Do not operate in poor lighting.
2
3
general safety rules
general safety rules
•Keep all parts of your body away from any moving parts and all hot surfaces of the unit.
•Do not point the blower nozzle in the direction of people or pets.
•Do not put any object into openings. Do not use with any opening blocked; keep openings free
of dust, lint, hair, and anything that may reduce air flow.
•Never run the unit without the proper equipment attached. Always ensure the sweeper tubes
are installed.
•Check the work area before each use. Remove all objects such as rocks, broken glass, nails,
wire, or string which can be thrown or become entangled in the machine.
•When not in use, blower should be stored indoors in a dry, locked up place—out of the reach
of children.
•Use only identical manufacturer’s replacement parts and accessories. Use of any other parts
may create a hazard or cause product damage.
•Maintain tool with care. Keep fan area clean for best and safest performance. Follow
instructions for proper maintenance. Do not attempt to clear clogs from tool without first
removing the battery.
•Do not charge battery tool in rain, or damp or wet location. Following this rule will reduce the
risk of electric shock.
•For household use only.
•Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards when not using your battery tool or when
changing accessories. Following this rule will reduce the risk of electric shock, fire, or serious
personal injury.
•Remove or disconnect battery before servicing, cleaning or removing material from the
gardening appliance.
•Use only Greenworks batteries (Model #29662.)
•Store idle appliances - When not in use, blower should be stored indoors in a dry, locked
place out of the reach of children.
•Do not dispose of the batteries in a fire. The cell may explode. Check with local codes for
possible special disposal instructions.
•Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause
damage to the eyes or skin. It may be toxic if swallowed.
•Do not place battery tools or their batteries near fire or heat. This will reduce the risk of
explosion and possibly injury.
•Batteries can explode in the presence of a source of ignition, such as a pilot light. To reduce
the risk of serious personal injury, never use any cordless product in the presence of open
flame. An exploded battery can propel debris and chemicals. If exposed, flush with water
immediately.
•Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has
been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly
dispose of a dropped or damaged battery immediately.
•Exercise care in handling batteries in order not to short the battery with conducting materials
such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns.
Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause
damage to the eyes or skin. It may be toxic if swallowed.
•To reduce the risk of electrical shock, do not expose to rain, do not use on wet surfaces. Store
indoors.
•Save these instructions. Refer to them frequently and use them to instruct others who may
use this power tool. If you loan someone this power tool, loan them these instructions also.
CHILD SAFETY
Tragic accidents can occur if the operator is not aware of the presence of children.
•Keep children out of the working area and under the watchful care of a responsible adult.
•Do not allow children under the age of 14 to operate this blower. Children who are 14
years of age and older must read and understand the operating instructions and safety
rules in this manual and must be trained and supervised by a parent.
•Stay alert, and turn the blower off if a child or any other person enters the working area.
•Use extreme care when approaching blind corners, doorways, shrubs, trees, or other
objects that may obscure your view of a child who may run into the path of the blower.
WA R N I N G
(PROPOSITION 65)
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
•Lead from lead-based paints
•Crystalline silica from bricks and cement and other masonry products, and
•Arsenic and chromium from chemically treated lumber.
Your risk of exposure to these chemicals varies depending on how often you do this type of
work. To reduce your exposure to these chemicals, work in a well-ventilated area, and work with
approved safety equipment, such as dust masks that are specially designed to filter out microscopic
particles.
•For best results, your battery tool should be charged in a location where the temperature is
more than 50°F but less than 100°F. To reduce the risk of serious personal injury, do not store
outside or in vehicles.
•Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in
contact with your skin, wash immediately with soap and water, then neutralize with lemon juice
or vinegar. If liquid gets into your eyes, flush them with clean water for at least 10 minutes,
then seek immediate medical attention. Following this rule will reduce the risk of serious
personal injury.
4
5
SymbolS
SymbolS
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
The following signal words and meanings are intended to explain the levels of risk associated
with this product.
SYMBOL NAME
DESIGNATION/EXPLANATION
V Volts
Voltage
A Amperes
Current
Hz
HertzFrequency (cycles per second)
W Watts
Power
min Minutes
Time
Alternating Current
Type of current
Direct Current
Type or a characteristic of current
No Load Speed
Rational speed, at no load
/min
Per Minute
Revolutions, strokes, surface speed, orbits etc.,
per minute
Do not expose to rain or use in damp locations
Wet Conditions Alert
Read The Operator’s Manual
To reduce the risk of injury user must read and
understand operator’s manual before using this
product.
Eye and Hearing Protection
Wear eye and hearing protection that is marked to
comply withANSI Z87.1 when operating this equipment.
Precautions that involve your safety.
Safety Alert
SYMBOL
SIGNAL
MEANING
DANGER
Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury.
CAUTION
(Without Safety Alert Symbol) Indicates a situation that may
result in property damage.
SERVICE
Servicing requires extreme care and knowledge and should be performed only by a qualified
service technician. For service we suggest you return the product to your nearest AUTHORIZED
SERVICE CENTER for repair. When servicing, use only identical replacement parts.
WA R N I N G
To avoid serious personal injury, do not attempt to use this product until you have read this Owner's
Manual thoroughly and understand it completely. If you do not understand the warnings and
instructions in this Owner's Manual, do not use this product. Call the Toll-free Helpline (1-888-9096757) for assistance. The operation of any power tool can result in foreign objects being thrown
into your eyes, which can result in severe eye damage. Before operating a power tool, always wear
safety goggles, safety glasses with side shields, or a full face shield when needed. We recommend
a Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields.
Always use eye protection that is marked to comply with ANSI Z87.1.
Long HairFailure to keep long hair away from the air inlet
could result in personal injury.
Loose Clothing
Failure to keep loose clothing from being drawn
into air intake could result in personal injury.
Keep Bystanders Away
Keep all bystanders at least 50 ft. away.
Blower Tubes
Do not operate without tubes in place.
SAVE THESE INSTRUCTIONS
6
7
know your BLOWER
Assembly instruction
The safe use of this product requires an understanding of the information on the tool and in this
operator’s manual as well as a knowledge of the project you are attempting. Before use of this
product, familiarize yourself with all operating features and safety rules. (See Fig. 1)
UNPACKING
•This product requires assembly.
HIGH VELOCITY CONCENTRATOR NOZZLE
The high velocity nozzle is great for wet sticky leaves. It allows you to scrape wet leaves or
debris while operating the blower.
TOOLLESS ATTACHMENTS
The blower tube with high velocity nozzle, vacuum bag, and vacuum tubes can be easily installed on the product without any additional tools.
TWO-SPEED
The two-speed switch is designed for Low speed which provides longer battery life as well as
providing Turbo Speed which is used for high power clean-up as well as mulch/vac function.
NOTE: When mulching leaves the Blower/Vac must be in TURBO-MULCH mode.
VARIABLE
SWITCH
LOW/HIGH
BUTTON
40V LITHIUM-ION
BATTERY
•Inspect the product carefully to make sure no breakage or damage occurred during shipping.
•Do not discard the packing material until you have carefully inspected and satisfactorily
operated the product.
PACKING LIST
AUXILIARY
HANDLE
BLOWER
TUBE
•Carefully remove the product and any accessories from the box. Make sure that all items
listed in the packing list are included.
•If any parts are damaged or missing, please call 1-888- 909-6757 for assistance.
ON/OFF BUTTON
LOCK BUTTON
WA R N I N G
Do not use this product if any parts on the Packing List are already assembled to your product
when you unpack it. Parts on this list are not assembled to the product by the manufacturer and
require customer installation. Use of a product that may have been improperly assembled could
result in serious personal injury.
MULCH/VACUUM
GATE
•Blower/Vac
(31108810)
•Blower Tube
(34105810)
•Concentrator Nozzle
(34103810)
•Mulcher Tubes
•
- Upper Tube (34106142A)
•
- Lower Tube
(34107142)
•Bag (31101810)
CONCENTRATOR
NOZZLE
•40V Battery
(29662)
•40V Charger
(29292)
•Operator’s Manual
WA R N I N G
If any parts are damaged or missing do not operate this product until the parts are replaced.
Failure to heed this warning could result in serious personal injury
40V LITHIUM-ION
CHARGER
WA R N I N G
Do not attempt to modify this product or create accessories not recommended for use with this
product. Any such alteration or modification is misuse and could result in a hazardous condition
leading to possible serious personal injury.
MULCHER TUBES
BAG
Fig. 1
8
9
Assembly instruction
Assembly instruction
Assemble as a mulcher (See Fig. 2)
Assemble as a blower ((See Fig. 3))
1. Slide the front and rear mulcher tubes together until the lock button engages. (See fig 2)
1. Slide blower tube forward until the notched areas on the blower housing click into the slots on
the tube.
2. Insert the concentrator nozzle into the regular nozzle to lock. (Concentrator nozzle is used toincrease air flow in tight areas: flower beds. under decks, etc.).
2. Pull the lock button forward to disengage the gate. Hold the gate open. (See fig 2.1)
3. Insert the “wedged” end clip of the mulcher tube into the rear clip. (See fig 2.2). Push the
“hooked” end clip of the mulcher tube into the front clip. (See fig 2.3). Press the lock button back
to engage the mulcher tube. (See fig 2.4)
4. To remove mulcher tubes, follow the steps (3) (2) (1).
5. Insert the bag adaptor into the blower outlet. Lock the bag adaptor with the lock button. To remove the bag, simply press lock button and remove bag. (see Fig.4).
NOTCHED
AREA
NOTE: It may be necessary to remove the blower tube or mulcher tubes to clear a blocked tube or impeller.
SLOT
WA R N I N G
BLOWER
TUBE
To prevent serious personal injury, make sure the switch is in the OFF position, it is unplugged, and
the impellers have stopped before attaching or removing tubes.
CONCENTRATOR
NOZZLE
Fig.2
AIR
OUTLET
PUSH
INSERT
Fig.2.2
Fig.2.1
PUSH
OUT
Fig.2.3
Fig. 3
INSTALLING BAG WITH SHOULDER HARNESS (See Fig.4)
While standing in the operating position adjust the length to fit the operator’s size. Pull the tab to
lengthen, pull the strap to shorten.
②
③
① Lock button
TAB
Fig.2.5
Fig.2.4
STRAP
⑤
④
Fig. 4
10
11
operation
operation
BATTERY
STARTING/STOPPING THE
BLOWER/MULCHER (See Fig.6)
IMPORTANT! The battery pack is not charged when it is purchased. Before using the blower
for the first time, place the battery pack in the battery charger and charge. Make sure to read all
safety precautions, and follow the instructions in the Battery Charger section.
To install (See Figure 5.)
1.Align the tongue (3) of the battery pack with the cavity (4) in the blower housing.
2.Grasp the blower (2) firmly.
3.Push the battery pack into the handle until the latch locks into place.
4.Do not use force when inserting the battery pack. It should slide into position and “click”.
To remove (See Figure 5.)
1. Press the latch button (1) on the battery pack down and hold.
2. Grasp the blower (2) firmly, and pull the battery pack out of the handle.
NOTE: The battery pack fits into the handle snugly in order to prevent accidental dislodging. It
may require a strong pull to remove it.
1. Press the On/Off (
) Switch and
you will hear beeping sounds, and the
blower will turn on in low speed.
2. Roll the variable speed dial forward
to increase speed from 70MPH to
130MPH
3. Press the low/high switch(
)
to increase the speed options from
75MPH to 185MPH.
4. To Turn off, press the on/off switch
(
)
ON/OFF
SWITCH
LOW/HIGH
SWITCH
VARIABLE
SWITCH
IMPORTANT: TURBO-MULCH by
pressing the “LOW/HIGH button, with
the variable speed dial set to high
speed (5).
Fig. 6
HOLDING THE BLOWER/
MULCHER(See Fig.7)
2
4
Before operating the unit, stand in
the operating position. Check for the
following:
• Operator is wearing proper clothing, such as boots, safety glasses
or goggles, ear/hearing protection,
gloves, long pants and a long sleeve
shirt.
3
WA R N I N G
1
Fig. 5
To avoid serious personal injury, wear
goggles or safety glasses at all times
when operating this unit. Wear a face
mask or dust mask in dusty locations.
WA R N I N G
Follow these instructions in order to avoid injury and to reduce the risk of electric shock or fire:
• Replace the battery pack or the charger immediately if the battery case or charger cord is damaged.
• Verify that the switch is in the OFF position before inserting or removing the battery pack.
• Verify that the battery pack is removed and the switch is in the OFF position before inspecting,
adjusting, or performing maintenance on any part of the blower.
• Read, understand, and follow the instructions contained in the section entitled Charging Procedure.
WA R N I N G
To prevent serious personal injury or
damage to the unit, make sure the
blower tube or the mulcher tubes and
the bag are in place before operating
the unit.
Fig. 7
12
13
operation
OPERATIon
STATUS
LED
SOLVE METHOD
hall fault protection
Green light off
red light on; flash 7 times;
each time keep 1hz
interval: 3s; keep 60s
buzzer alarm
Off the trigger and restart it
low-voltage protection
Green light off
red light on; flash 5 times;
each time keep 1hz
interval: 3s; keep 60s
buzzer alarm
Off the trigger and restart it
or Charging the battery
Over load protection
Green light off
red light on; flash 4 times;
each time keep 1hz
interval: 3s; keep 60s
buzzer alarm
Off the trigger and restart it
Battery jam protection
Green/Red light off
Unit stop running
Resetting the blower vac by
removing the battery for 5
seconds
Abnormal battery temp.
Led off
When the temp. of the battery low down, the blower
can run well
OPERATING TIPS (See Fig.8)
•The bag is installed and zipped closed (when used as a mulcher).
•Be sure the bag is zipped closed before operating the unit.
•Assure the unit is not directed at anybody or any loose debris before starting the unit.
•Verify that the unit is in good working condition. Make sure the tubes and guards are in
place and secure.
•Always hold the unit with both hands when operating.
•Keep a firm grip on both the front and rear handle or grips.
•To reduce the risk of hearing loss associated with sound level(s), hearing protection is
required.
•Use the shoulder strap when using unit as a mulcher.
•To reduce noise levels, limit the number of pieces of equipment used at any one time.
•To reduce noise levels, operate power blowers at the lowest possible speed to do the job.
•Use rakes and brooms to loosen debris before blowing.
•In dusty conditions, slightly dampen surfaces.
•Conserve water by using power blowers instead of hoses for many lawn and garden
applications, including areas such as gutters, screens, patios, grills, porches, and
gardens.
•Watch out for children, pets, open windows or freshly washed cars, and blow debris safely
away.
•Clean up after using blowers and other equipment. Dispose of debris appropriately.
Fig. 8
NOTE: Please ensure that the Mulch/Vacuum Gate is completely closed and locked.
14
15
operation
MAINTENANCE
CLEANING THE UNIT
AIR VENTS
Never cover air vents. Keep them free from obstructions and debris. They must always remain
clear for proper motor cooling.
WA R N I N G
To avoid serious personal injury, do not wear loose fitting clothing or articles such as scarves,
strings, chains, ties, etc., that could get drawn into the air vents. To make sure long hair does not
get drawn into the air vents, tie back long hair.
OPERATING AS A BLOWER
Hold the blower firmly. Sweep from side to side with the nozzle several inches above the ground
or floor. Slowly advance the unit, keeping the accumulated pile of debris in front of you. Most dry
blowing operations are better suited to low speeds, rather than high. High speed blowing is a
better way to move heavier items like large debris or gravel.
OPERATING AS A MULCHER
Hold the vac firmly, tilting the mulcher tubes (2-4 in. or 5-10 cm), and use a sweeping action to
collect light debris. The debris will flow into the bag. Items such as small leaves and twigs will be
mulched as they pass through the fan housing. For longer bag life and increased performance,
empty the bag often.
CLEARING A BLOCKED TUBE / IMPELLER
WA R N I N G
To avoid serious personal injury, always wear gloves to protect yourself from the impeller blades or
other sharp objects.
1.Press the on/off (
) button and wait for the unit to come to a complete stop.
2.Remove the battery pack.
WA R N I N G
In order to avoid personal injury and the risk of fire and electric shock, remove the battery pack
before adjusting, inspecting, or cleaning the blower.
Cleaning
Remove the battery pack.
1. Brush or blow dust and debris out of the air vents using compressed air or a vacuum. Keep
the air vents free of obstructions, sawdust, and wood chips. Do not spray, wash, or immerse the
air vents in water.
2. Wipe off the housing and the plastic components using a moist, soft cloth. Do not use strong
solvents or detergents on the plastic housing or plastic components. Certain household cleaners
may cause damage, and may cause a shock hazard.
Battery Pack
• Store the battery pack at half charge. 2 lights remaining on the battery is ideal for storage conditions.
• Once the charging light turns green, remove the battery from the charger and disconnect the
charger from the outlet.
• Do not store the battery pack on the tool.
• After charging, the battery pack may be stored in the charger, as long as the charger is not
plugged in.
Charger Maintenance
• Keep the charger clean and clear of debris. Do not allow foreign material to get into the recessed cavity or onto the contacts. Wipe the charger clean with a dry cloth. Do not use solvents
or water, and do not place the charger in wet conditions.
• Unplug the charger when there is no battery pack in it.
• Fully charge the batteries before placing them in storage.
• Store the charger at normal room temperature. Do not store it in excessive heat. Do not use
the charger in direct sunlight. Recharge at room temperature between 45˚F and 104˚F (7˚C and
40˚C). If the battery pack is hot, allow it to cool down before recharging.
3.Remove the blower tube or mulcher tubes and the bag.
4.Carefully remove material blocking the tube or impeller. Inspect the blades to ensure
no damage has occurred. Rotate the impeller blades by hand to ensure the blockage is
completely cleared.
5.Reinstall the blower tube or mulcher tubes and the bag.
6.Insert the battery pack into the unit.
16
17
MAINTENANCE
ENVIRONMENTALLY SAFE BATTERY DISPOSAL
CLEANING THE BAG
1.Empty the bag after each use to avoid deterioration and obstructing air flow, which will
reduce the performance of the mulcher.
2.Wearing eye protection and a dust mask, clean the bag as needed. Turn the bag inside
out after initial emptying and vigorously shake out dust and debris.
3.Wash the bag once a year, or more often if needed:
a.
Remove the bag.
b.
Turn bag inside out.
c.
Hang it up.
d.
Hose it down thoroughly.
e.
Leave it hanging to dry.
f.
Turn bag right-side out and reinstall.
The following toxic and corrosive materials are in the batteries used in this blower
battery pack: Lithium-Ion, a toxic material.
WA R N I N G
All toxic materials must be disposed of in a specified manner to prevent contamination of the
environment. Before disposing of damaged or worn out Lithium-Ion battery packs, contact your
local waste disposal agency, or the local Environmental Protection Agency for information and
specific instructions. Take the batteries to a local recycling and/or disposal centre, certified for
lithium-ion disposal.
WA R N I N G
STORAGE
•Store the unit locked up to prevent unauthorized use or damage.
•Store the unit in a dry, well-ventilated area.
•Store the unit out of the reach of children
18
If the battery pack cracks or breaks, with or without leaks, do not recharge it and do not use. Dispose of it and replace with a new battery pack. DO NOT ATTEMPT TO REPAIR IT!
To avoid injury and risk of fire, explosion, or electric shock, and to avoid damage to the environment:
•Cover the battery's terminals with heavy-duty adhesive tape.
•DO NOT attempt to remove or destroy any of the battery pack components.
•DO NOT attempt to open the battery pack.
•If a leak develops, the released electrolytes are corrosive and toxic. DO NOT get the
solution in the eyes or on skin, and do not swallow it.
•DO NOT place these batteries in your regular household trash.
•DO NOT incinerate.
•DO NOT place them where they will become part of any waste landfill or municipal solid
waste stream.
•Take them to a certified recycling or disposal centre.
19
troubleshooting
PROBLEM
Unit will not blow
or mulcher.
Unit will not start.
LIMITED four-YEAR WARRANTY
POSSIBLE CAUSE
SOLUTION
1. Bag full
1. Empty the bag.
2. Blocked tube
2. Clear the blockage.
3. Blocked impeller
3. Clear the blockage
4. Dirty bag
4. Clean the bag.
5. Torn bag
5. Replace the bag.
6. Bag unzipped
6. Zip up the bag.
7. Battery is not secure.
7. To secure the battery pack, make sure
the latches on the top of the battery pack
snap into place.
8. Battery is not charged.
8. Charge the battery pack according
to the instructions included with your
model.
1. Battery is not secure.
1. To secure the battery pack, make sure
the latches on the top of the battery pack
snap into place.
GREENWORKS™ hereby warranties this product, to the original purchaser with proof of
purchase, for a period of four (4) years against defects in materials, parts or workmanship.
GREENWORKS™, at its own discretion will repair or replace any and all parts found to be
defective, through normal use, free of charge to the customer. This warranty is valid only for
units which have been used for personal use that have not been hired or rented for industrial/
commercial use, and that have been maintained in accordance with the instructions in the
owners’ manual supplied with the product from new.
Battery and charger carries a two (2) year warranty against defects in workmanship and
materials. Batteries must be charged in accordance with the operator’s manuals directions and
regulations in order to be valid.
Items not covered by warranty:
1.Any part that has become inoperative due to misuse, commercial use, abuse, neglect,
accident, improper maintenance, or alteration; or
2. Battery is not charged.
2. Charge the battery pack according to
the instructions included with your model.
3. Power/speed switch is in
the OFF position.
3. Press the on/off switch.
4. Defective power switch.
4. Call toll free helpline: 1-888-909-6757.
5. Vac tubes are not correctly
installed.
5. Check vac tubes to ensure that they
are allowing the switch to be engaged
when correctly installed.
GREENWORKS Helpline (1 888 90WORKS):
6. Intake gate/cover is not
closed.
6. Ensure that gate/cover is fully closed
an locked.
Warranty service is available by calling our toll-free helpline, 9am to 5pm EST. at 1-888-909-6757
(1-888-90WORKS).
2.The unit, if it has not been operated and/or maintained in accordance with the owner's
manual; or
3.Normal wear, except as noted below;
4.Routine maintenance items such as lubricants, blade sharpening;
5.Normal deterioration of the exterior finish due to use or exposure.
Transportation Charges:
Transportation charges for the movement of any power equipment unit or attachment are the
responsibility of the purchaser. It is the purchaser’s responsibility to pay transportation charges
for any part submitted for replacement under this warranty unless such return is requested in
writing by GREENWORKS.
20
21
EXPLODED VIEW
parts list
Item No.
1
2
3
4
5
6
7
8
9
10
11
22
Part No.
31108810
33202810
34103204
33203142
34119144 34118144-1
34105810
34103810
31101810
34106142A
34107142
Description
Qty
blower/Vac1
shaft sleeve
1
Vac mulching impelle
1
Vac cutter blade
1
pad
1
turn cap
1
blower tube (brushless)
1
concentrator nozzle
1
bag assy.
1
upper Vac-tube
1
lower Vac-tube 1
23
NOTES
TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757)
24
Rev: 00 (07-12-13)
Printed in China on 100% Recycled Paper