Quick Disconnect System - Cam and Groove.indd

Introducing Cam and Groove Quick
Disconnects
Easy to Use Hose Connectors for Homebrewing and Winemaking
Engineer your system to operate with ease by incorporating stainless steel cam and groove quick
disconnect fittings.
Cam and groove fittings preceded the current tri-clamp fittings common to commercial breweries and now available
to homebrewers.
Now that we have located a quality supplier for these fittings, anyone can inexpensively and easily connect or
disconnect their kettle, reroute their pump for use with a counterflow chiller or a hopback and disconnect your tubing
used for any purpose just by outfitting the ports and the hoses with these fittings. They are universally interchangeable at any time.
This diagram illustrates the universal adapability of the fittings. The choice is then yours to make - fit a Type F
to the kettle with a Type C on the tubing or use a Type B on the kettle and Type E on the tubing. These are some of the
many configurations possible adapting between 1/2” male and female pipe threaded fittings and 1/2 i.d. tubing.
Type F
Type A
Type C
Type C
Type C
Type F
Type E
Type C
Type B
Type D
Cam and Groove Fittings
PB60 Type A, Female 1/2” NPT to
Male Adapter. ........................$5.49
PB61 Type B, Male 1/2” NPT to
Female Adapter .......................$8.49
Type C, 1/2” Hose Barb to Female Adapter .........................$8.49
PB63 Type D, Female 1/2” NPT to
Female Adapter ...................$8.49
PB62
PB64 Type E, 1/2” Hose Barb to
Male Adapter ..........................$4.49
PB65 Type F, Male 1/2” NPT to
Male Adapter ...........................$5.49
copyright ©2012 The Beverage People