User manual
GGS64
GGS64W
GGS75W
GB
Manual
Pictograms used
Important information
Tip
GB 3 - GB 22
CONTENTS
Your gas hob
Introduction
Description
4
5
What you should pay attention to
Safe use
Children
6
6
7
Igniting and adjusting
Flame failure device
8
8
Safety
Controls
Comfortable cooking
Optimal use of the hob
Wok burner
9
9
Maintenance
General
Cleaning
10
10
Faults table
12
General
Gas connection
Electrical connection
Building in
Technical data
14
14
14
15
21
Faults
Installation
Environmental aspects
Disposal of package and appliance
22
GB 3
YOUR GAS HOB
Introduction
This gas hob has been designed for the true cooking enthusiast. The
differences in burner capacity allow you to cook any type of dish. The
control buttons have an integrated spark iginition, which means that
you need only one hand to ignite and operate the burners. With the
GGS64..., GGS64W... and GGS75... models, at least 2 burners remain
available for cooking other dishes while cooking food in the wok, thanks
to the spacious layout of the wok burners.
The gas hob is fitted with a flame failure device, which ensures that the
gas supply is shut off if the flame goes out during the cooking process.
This manual explains optimum use of the gas hob. In addition to
information on operation, you will also find background information that
may be useful to you when using this product.
Read the manual thorougly before using the appliance, and store
these instructions in a safe place for future reference.
The manual also serves as reference material for service technicians.
Please, therefore, stick the appliance identification card in
the space provided, at the back of the manual. The appliance
identification card contains all the information that the service technician
will need in order to respond appropriately to your needs and questions.
Enjoy your cooking!
GB 4
YOUR GAS HOB
Description
GGS64...
1
2
3
1
GGS64W...
1
5 6
4
2
1
5 6
GGS75W...
4
1
2
1
4
1.
2.
3.
4.
5.
6.
5 6
Semi-rapid burner
Simmer burner
Rapid burner
Wok burner
Pan support
Drip tray
GB 5
SAFETY
What you should pay attention to
•
•
•
•
•
•
•
•
•
•
•
•
Ensure that there is adequate ventilation during use. Keep natural
ventilation openings open.
When using the hob for long periods, extra ventilation is necessary.
Open a window for instance or install a mechanical fan.
Use the hob only for preparing dishes. The appliance is not suitable
for space heating.
Never flambé under an extractor hood. The high flames can cause a
fire, even if the fan is switched off.
The burner parts are hot during and immediately after use. Do not
touch them, and avoid contact with non-heat-resistant materials.
Never immerse hot burner parts in cold water. The rapid cooling can
damage the enamel.
The distance from the pan to a knob or non-heat-resistant wall
should always be greater than two centimetres. In case of smaller
distances the high temperature may cause the knobs or wall to
discolour and/or distort.
Always use the pan supports and suitable cooking utensils.
Always place the pan on the pan support. Placing the pan directly
on the burner head can result in dangerous situations.
Aluminium trays or foil are not suitable as cooking utensils. They
can become burnt into the burners and pan supports.
The hob can only function effectively if the burner parts have been
assembled using the guide ridges.
Ensure that the pan supports lie properly against each other and flat
on the glaa panel. Only then can the pans be positioned stably.
Safe use
•
•
•
•
GB 6
The device will become hot during use and will remain so for some
time after it has been switched off. So please be sure not to touch
the device while it is hot.
Always wear oven gloves or use oven cloths when operating the
device. Keep oven gloves or oven cloths away from the flame.
Do not warm closed tins and such like on the hob. There will be a
buildup of pressure that will cause tins to explode. You might get
injured or scalded.
The device is not to be positioned nor used outdoors.
SAFETY
•
•
•
•
•
•
Do not use the device as a worktop. The device may be switched on
by accident or still be hot, which means objects could melt, become
hot or catch fire.
Never cover the device with a cloth or something similar. If the
device is still hot or is switched on, there is a risk of fire.
Be extra careful when using oils or fats. Overheated oil or fats may
catch fire. Risk of fire!
Under no circumstances should you use water to try and extinguish
the flames if the oil or fat were to catch fire! Extinguish the flames
with a suitable lid, a damp cloth or some such object.
If there is a drawer underneath the device, without an intermediate
bottom, this should not be used to store highly flammable objects/
materials.
Never use a pressure cleaner or a steam cleaner to clean the
device. This could cause a short circuit.
Children
•
•
•
•
•
•
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Never let children play with this device. Children are not to be
allowed near the device unsupervised.
The device will become hot during use and will remain hot for some
time after it has been switched off.
Do not keep objects in cupboards above or behind the device that
children might find interesting.
Children may sustain burns when they pull pots or pans off the
device. A special frame that stops children from getting close to the
device is available from the specialist dealer.
If the safety instructions and warnings are not heeded, the
manufacturer can not be held liable for any consequential damage.
GB 7
CONTROLS
Igniting and adjusting
1
A symbol near the control knob indicates which burner is being
controlled. The burners can be adjusted continuously between the high
and low positions.
2
3
4
1. 0-setting
2. Burner indication
3. High setting
4. Simmer setting
Flame failure device
Your gas hob has a flame failure device. This ensures that the gas
supply is shut off if the flame goes out during cooking.
Operating the thermal flame failure device
Press the control knob and turn it anti-clockwise. Hold the control knob
pressed for approximately 3 seconds after the burner has ignited.
The flame failure device switches on.
When the burner does not ignite, check whether:
• the burner cap is placed on top of the burner correctly;
• the burner/spark plug is clean and dry.
GB 8
COMFORTABLE COOKING
Optimal use of the hob
Always ensure that the flames remain below the pan. If flames
play around the pan, a lot of energy is lost. In addition, the
handles can get too hot. Do not use pans with a base diameter
less than 12 cm. Smaller pans will not be stable.
Wrong
Right
•
•
•
•
When frying, stir-frying, heating through large quantities and
deepfrying it is best to use the rapid or wok burner.
Preparing sauces, simmering and boiling can be done best on the
simmer burner. On its high setting this burner is large enough for
cooking food right through.
Cook with the lid on the pan. This way you save up to 50% energy.
Use pans with a flat, clean, dry base. Pans with a flat base stand
stably and pans with a clean base transfer the heat more effectively
to the food.
Wok burner (GGS64W..., GGS75W...)
With the wok burner you can prepare dishes at a very high temperature.
For this purpose it is important:
• to cut the ingredients into strips, slices or pieces before cooking;
• to use good-quality oil, such as olive, maize, sunflower or peanut oil
when stir-frying. A small quantity is enough. Butter and margarine on
the other hand will burn because of the high heat;
• to place the dishes with the longest cooking time in the pan first,
so that at the end of the cooking time all ingredients are cooked
al dente at the same time.
The auxiliary support supplied for the wok burner or available as an
accessory provides additional stability in case of a wok with a round
base. The auxiliary support for the wok has special recesses so it can
be positioned neatly on top of the standard wok pan support.
GB 9
MAINTENANCE
General
Wok burner
Your appliance has been manufactured from high-grade materials,
which are easy for you to clean.
• Regular cleaning immediately after use prevents over-cooked food
being able to become ingrained and cause stubborn stains that are
difficult to remove. Use a mild cleaning agent.
• Clean the control knobs, burners and pan supports first and then the
drip tray. This avoids the drip tray getting dirty again during cleaning.
• Clean the spark plugs preferably with a cloth. Do this carefully. the
spark plug can become defective. The sparkplug will only operate
correctly in a dry environment. If the plug is very dirty, you may
clean the point with a tiny brush.
• Set the pan supports down vertically, without sliding them over the
drip tray.
• Assemble the burner parts with the aid of the guide ridges, paying
attention to the cut-out sections in the burner head for the sparkplug and thermocouple. Make sure that the burner parts lie flat.
1. External burner head
2. Internal burner head
3. Gas base
4. Burner base
11
22
1
1
5. Spark plug
6. Thermo couple
33
Simmer, semi-rapid and
rapid burner
1. Burner head
2. Burner base
2
2
44
5
6
3
3
4
3. Spark plug
4. Thermo couple
Cleaning
Cleaning the pan support
Do not clean the pan supports in the dishwasher. The enamel on the
pan supports is suitable for cleaning by dishwasher. However, the
connection with the rubber feet is not. Moreover, the pan supports might
show some discoloration if they were washed in the dishwasher. If the
rubber feet are lost, the pan support is likely to damage the
drip tray.
GB 10
MAINTENANCE
Stubborn stains on enamel (pan supports, burner caps, drip trays)
Remove with a non-abrasive cream. Never use scouring powder,
scouring pads, sharp objects or aggressive cleansing agents.
Cleaning removable burner components
Burner parts should not be cleaned in the dishwasher. The parts may
be damaged by the dishwasher detergent! The removable burner
components (including wok) are best cleaned with a mild cleaning
product and a soft cloth. In the case of obstinate stains you can soak the
parts in hot suds. Never use scouring powder, scouring pads,
sharp objects or aggressive cleansing agents.
Brass wok burner parts
A few parts of the work burner are made from brass. It is normal for the
colour of the brass to change as a result of the high temperatures that
occur when cooking with a wok.
Stubborn stains on stainless steel (drip trays)
If spilled, acid fluids and sugary foodstuffs like red cabbage, beetroot,
soy sauce, applesauce and rhubarb may cause the surface to discolour.
Stubborn stains on stainless steel are best removed with a cleaning
agent for stainless steel. Always polish in the direction of the steel
structure to avoid shine spots (this kind of damage is not covered by the
warranty!).
If the above methods do not remove the stains, clean the plate with a
special cleaning agent for stainless steel. Remember to treat the entire
drip tray in order to avoid discolouring. Also, as a follow-up treat the drip
tray with a polish or maintenance agent for stainless steel. Please note
that over the years the surface will slightly discolour.
Keradur® burner bases
The burner bases have a unique Keradur® surface coating. The special
dirt-repelling lacquer has a ceramic filling which makes cleaning easier
and substantially improves the durability of the burners. The burner
bases are best cleaned with a mild cleaning product and a soft cloth.
GB 11
FAULTS
Faults table
If the appliance does not work properly, this does not always mean that
it is defective. Try to deal with the problem yourself first by checking the
points mentioned below in the table.
GB 12
Fault
Cause
Solution
There is a smell of gas in the
vicinity of the appliance.
The gas connection of the gas
hob is leaking.
Close the main gas tap.
Contact your gas fitter.
A burner does not ignite.
Plug not in socket.
Push the plug into the socket.
Fuse defective/fuse in meter
cabinet switched off.
Fit a new fuse or switch the
automatic fuse back on.
Sparkplug dirty/damp.
Clean and dry the sparkplug.
Burner parts not correctly
installed.
Assemble the burner parts
using the centring ridges.
Burner parts dirty/damp.
Clean and dry the burner
parts, making sure that the
outflow holes are open.
Main gas tap closed.
Open the main gas tap.
Fault in the gas network.
Check with your gas supplier.
Gas bottle or tank is empty.
Connect a new gas bottle or
have the tank filled.
Wrong type of gas used.
Check that the gas used is
suitable for the appliance. If
not, contact your gas fitter.
Control knob not kept pressed
in far enough
Keep the control knob
pressed in far enough
between full and low. At first
use this can take some more
time because of the gas
supply.
FAULTS
Fault
Cause
Solution
The burner does not burn
evenly.
Burner parts incorrectly
installed.
Assemble the burner parts
using the centring ridges.
Burner parts dirty or damp.
Clean and dry the burner
parts, making sure that the
outflow holes are open.
Wrong type of gas used.
Check that the gas used is
suitable for the appliance. If
not, contact your gas fitter.
Control knob not kept pressed
in long enough.
Keep the control knob
pressed in for at least
5 seconds.
The burner goes out after
igniting.
GB 13
INSTALLATION
General
This appliance should only be connected up by a registered installer!
The gas and electrical connection must comply with national and local
regulations.
Warning!
The type of gas and the country for which the appliance has been
designed are indicated on the application identification card.
This is a category 3 appliance.
Gas connection
•
•
We recommend that the hob be connected by means of a fixed pipe.
Connection using a specially designed safety hose is also permitted.
Behind an oven use must be made of a pipe made entirely out of
metal.
Warning!
• A safety hose may not be bent and must not come into contact with
moving parts of kitchen units.
• In all cases the connection tap for the appliance must be positioned
such that it is easily accessible.
Before using the appliance for the first time check the connections
using water and washing-up liquid to ensure that there are no gas
leaks.
Electrical connection
230V - 50Hz - 1.1 VA
•
•
•
•
GB 14
Wall socket and plug must be accessible at all times.
Electrical leads and cables should not be allowed to touch the hob.
If you want to make a fixed connection, ensure that a multi-pole
switch with a distance between contacts of 3 mm is installed in the
supply cable.
Do not use an adapter or an extension lead to connect the device to
the electrical mains. Safe use of the device cannot be guaranteed
with these accessories.
INSTALLATION
Warning!
This appliance must be earthed.
Installation, maintenance or repairs should only be carried out by
professionals who are authorized by the manufacturer, as failure to do
so will void the warranty.
The device should be disconnected from the mains prior to installation,
maintenance or repairs. The device is only disconnected from the
electric power if:
• the main switch of the electrical wiring/installation in the house is
switched off, or
• the fuse for the electrical wiring/installation in the house has been
completely removed, or
• the plug has been pulled out of the socket.
Faulty parts may only be replaced by original Gorenje+ parts. Only those
parts are guaranteed by Gorenje+ to meet the safety requirements.
If the connecting cable is damaged, it may only be replaced by the
manufacturer, the manufacturer’s service organisation or equivalently
qualified persons, in order to avoid dangerous situations.
Building in
Preparing the hob
Fit the elbow supplied on the appliance’s gas connection.
1. 1/2” ISO 228 (straight)
2. 1/2” ISO 10226-1
(conical) or 1/2” ISO 228
(straight)
3. Sealing ring
4. Pipe adapter for
liquid gas (Depending
on the country-specific
connection regulations.)
GB 15
INSTALLATION
Cut opening in worktop
• Saw the opening in the worktop. This should be done very
accurately (see building in dimensions on page 17).
• If the woodtop is made of treated wood, then coat the sawn surfaces
of the top with sealing varnish, to prevent moisture causing the top
to swell.
Attachment points for mounting brackets
See 1* in the illustrations of dimensions for building in from page 17
onwards for the attachment points for mounting brackets.
Screw hole
for mounting
bracket
Thin worktops
Thick worktops
Placing the sealing tape
Remove the protective foil from the sealing tape (A) and apply the tape
around the cut-out in the worktop.
A
GB 16
INSTALLATION
Building in dimensions
GGS64...
600
526
43
front
Minimum distance between rear of appliance and rear wall: 10 mm
600
490
560
60
front
1*
1*
G1/2’’
1*
20
1*
550
GB 17
INSTALLATION
GGS64W...
600
526
43
front
Minimum distance between rear of appliance and rear wall: 10 mm
600
490
560
60
front
1*
1*
G1/2’’
1*
20
1*
550
GB 18
INSTALLATION
GGS75W...
750
526
43
front
Minimum distance between rear of appliance and rear wall: 10 mm
600
490
560
60
1*
front
1*
1*
1*
G1/2’’
20
550
GB 19
INSTALLATION
Space to be left free around the appliance
A hob generates heat. Leave a sufficient distance between the
appliance and non heat-resistant materials. Take care also with
materials that may discolour (such as stainless steel).
min. 650 mm
min. 450 mm
min. 600 mm (GGS64...,GGS64W...)
min. 750 mm (GGS75W...)
min. 100 mm
min. 100 mm
The gas hob may only be built in next to one wall.
Caution!
The bottom of the hob becomes hot. Do not place combustible items in
a drawer if the drawer is fitted directly below the hob.
Install appliance and make connections
• Place the appliance in the worktop and secure it using the mounting
brackets and screws supplied.
• Connect to the gas supply.
• Check with soap suds that the connection is gastight.
• Connect the appliance to mains electricity.
GB 20
INSTALLATION
Technical data
On the label on the bottom of this equipment, you will find the total
wattage, the required voltage and the frequency.
Gas information
Simmer
(kW / g/h)
Semi-rapid
(kW / g/h)
Rapid
(kW / g/h)
Wok
(kW / g/h)
G20/20 mbar
1.00 / -
2.00 / -
3.00 / -
4.50 / -
G20/13 mbar
1.00 / -
1.90 / -
2.50 / -
4.10 / -
G30/28-30 mbar
0.90 / 65
1.60 / 115
2.30 / 166
3.50 / 252
G30/50 mbar
1.00 / 72
2.00 / 144
2.70 / 194
4.00 / 288
G31/67 mbar
1.00 / 72
2.00/ 144
2.70 / 194
4.00 / 288
G110/8 mbar
1.00 / -
1.90 / -
2.60 / -
3.55 / -
When adapting the appliance for use with another type of gas, see
conversion set manuals and use specified conversion set.
Burner power is indicated by observing the upper Hs caloric value.
Warning: these tasks may only be carried out by a qualifi ed
technician, authorized by the gas distributing company or
authorized service center!
GB 21
ENVIRONMENTAL ASPECTS
Disposal of packaging and appliance
In the manufacturing of this appliance durable materials were used.
Make sure to dispose of this equipment responsibly at the end of its
lifecycle. Ask the authorities for more information regarding this.
The appliance packaging is recyclable. The following may have been
used:
• cardboard;
• polythene film (PE);
• CFC-free polystyrene (PS hard foam).
Dispose of these materials in a responsible manner and in accordance
with government regulations.
As a reminder of the need to dispose of household appliances
separately, the product is marked with the symbol of a crossed-out
wheeled dustbin. This means that at the end of its working life, the
product must not be disposed of as urban waste. It must be taken to
a special local authority differentiated waste collection centre or to a
dealer providing this service.
Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriving from
inappropriate disposal and enables the constituent materials to be
recovered to obtain significant savings in energy and resources.
GB 22
700003572000
en (10-12)
Download PDF
Similar pages
Candy PV 750 SX
CDA HG6320
Smeg GP75ES
Candy PSP 750 ZEN
Gorenje K6N3AX hob
De Longhi Gas Hob DGH 705
Stoves S5-G600CW
`!2E20AE-bihidh!
Candy PG 644/1 SQBX
Candy PG 640