Optima Solis EAF-275 Rev0b.qxd

Solar Powered, Electronic
Hand Washing Faucet
Description
Solar Powered, Sensor Activated Electronic Hand Washing Faucet for pretempered or hot and cold water operation.
Models
EAF-275
EAF-275-ISM
Single Supply Faucet
(For pre-mixed water only)
With Integral Spout Temperature Mixer
(For Hot and Cold water supply connection)
Flow Rate
0.5 gpm/1.9 Lpm Aerator Spray Head
Specifications
Solar Powered, Sensor Activated, Electronic, Chrome Plated Constructed Metal,
Hand Washing Faucet with the following features:
• Modular One-piece Construction with all Concealed Components above
deck
• Double Infrared Sensors with Automatic Setting Feature
• Automatic Self-adapting Sensor Technology
• Solar Powered
• Magnetic Solenoid Valve
• Water Supply Connection with Flexible High-pressure Hose and Strainer
• Appropriate Mounting Hardware included
• Includes 6 VDC Lithium Battery Back-up Power Source
Variations
ISM
Integral Spout Mixer
Accessories
ETF-312-A Trim Plate for 4” (102 mm) Centerset Sink
ETF-510-A Trim Plate for 8” (203 mm) Centerset Sink
Trim Plates must be specified and ordered separately.
2.2 gpm/8.3 Lpm Aerator Spray Head
2.2 gpm/8.3 Lpm Laminar Flow Spray Head
EAF-10
EAF-13
Warranty
3 year (limited)
ADA Compliant
EAF-275-ISM
The new Optima solar powered faucet
— Bringing intelligence to water
The first solar powered electronic faucet's integrated
power plant transforms light into electrical energy.
Optimal performance any place, any time; in sunlight or
even artificial light. The unique "Solar Energy Module"
utilizes any light source efficiently.
Sloan’s new Optima EAF-275 Series electronic hand
washing faucets operate by means of a dual infrared
sensor and microprocessor based logic. The modular
design incorporates all of the operating components of
the faucet, including the sensor, solenoid, circuitry and
solar energy module above the sink within a die-cast
metal spout.
ISM models feature an integral temperature control lever
which allows the user to adjust the water temperature.
This adjustment can also be converted to a fixed setting.
EAF faucets ordered without the ISM variation must be
connected to a single, pre-tempered water supply.
This space for Architect/Engineer approval
Job Name
Date
Model Specified
Quantity
Variations Specified
Customer/Wholesaler
Contractor
Architect
Optima Solis EAF-275 S.S. — Rev. 0b (03/05)
The information contained in this document is subject to change without notice.
4-11/32”
(110 mm)
Description
Solar Powered, Sensor Activated Electronic Hand Washing Faucet for
pre-tempered or hot and cold water operation.
Flow Rate
5-11/32”
(136 mm)
24º
0.5 gpm/1.9 Lpm Aerator Spray Head
ELECTRICAL SPECIFICATIONS
Control Circuit
6 VDC — Includes Auto Set
and Range Adjustment LED
Sensor Range
Nominal:
4” - 5” (102 mm - 127 mm)
Faucet Adaptive Selfadjustment Range:
2” - 14” (51 mm - 356 mm)
nominal
Power Supply
2-1/16
(52 mm)
6 VDC Solar Energy Module
with 6 VDC Lithium Battery Back-up
Power Source
2-1/16
(52 mm)
2-9/16
(65 mm)
Time Out Setting
3 minutes — Maximum time faucet
will run upon continuous detection
OPERATION
2. As the user’s hands enter
the beam’s effective
range, the beam is
reflected back into the
Sensor Receiver and
activates the solenoid
valve allowing water to
flow from the faucet.
Water will flow until the
hands are no longer
sensed or until the faucet
reaches its automatic
time out limit setting.
1. A continuous, invisible
light beam is emitted
from the Sensor located
at the front of the hand
washing faucet.
3. When hands are moved
away from the Sensor, the
loss of reflected light
initiates an electrical
signal that deactivates the
Solenoid Valve shutting
off the water flow. The
Circuit then automatically
resets and is ready for the
next user.
ROUGH-IN
EAF-275
Faucet with Single Line Water Supply
EAF-275-ISM
Faucet with Hot and Cold Water Supply
MIXING LEVER
(Can Be Set and Removed)
SPOUT
SPOUT
1-3/16” (30 mm)
MIN. DIA. HOLE
REQUIRED
O-RING
O-RING
1-1/2” (38 mm)
MAX. DECK
THICKNESS
GASKET
RETAINER
13” (330 mm)
LONG FLEX HOSE
NUT
TEMPERED
SUPPLY
1-3/16” (30 mm)
MIN. DIA. HOLE
REQUIRED
If a connection to separate
hot and cold water supplies is
desired, then a Bak-Chek® tee
fitting (not supplied) must be
used prior to connecting to
the faucet.
1-1/2” (38 mm)
MAX. DECK
THICKNESS
GASKET
RETAINER
When the EAF faucet is
installed on a sink that has
three (3) hole punchings, a
Trim Plate should be used.
Trim Plates must be
specified and ordered
separately:
ETF-312-A
Trim Plate for 4” (102 mm)
Centerset Sink
ETF-510-A
Trim Plate for 8” (203 mm)
Centerset Sink
NUT
13” (330 mm)
LONG FLEX HOSES
HOT
SUPPLY
COLD
SUPPLY
SLOAN VALVE COMPANY • 10500 SEYMOUR AVENUE • FRANKLIN PARK, IL 60131
Phone: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380 • www.sloanvalve.com
Copyright © 2005 Sloan Valve Company
Printed in the U.S.A.
Optima Solis EAF-275 S.S. — Rev. 0b (03/05)
Download PDF
Similar pages
Douos SPECIFICATIONS
Beemlen SPECIFICATIONS
Amity SPECIFICATIONS
Eclipse SPECIFICATIONS
KitchenAid KKFV01LPSS User's Manual
Melik SPECIFICATIONS
Conifer SPECIFICATIONS