Distributor technology interior (Trains)

Distributor technology
interior (Trains)
Product Overview,
Planning and Project
remarks
Distribution technology cabinets and frames
Cable cabinet FGS-C and cable end racks FG-C
Cable cabinets FGS-C and cable end racks FG-C are keeping cable bushes, sealing end, isolating
transformer and other components in inlet frames.
With the cable cabinets or the cable end racks we ensure an electrically completely insulated set
up (double bar to the housing and housing to the wall and ground). The set up of the devices is
done with clip blots or clamping nut.
The width of the inlets is by default 152 mm for the mounting dimension 146 mm and can be
changed. In order to do that we also send you an inlet gauge.
For each vertical double bar you need 4 guidance rings for vertical jumping wire routing system
and jumper support for horizontal lead of modules, which are also being delivered, they are also
available to be added retrospectively.
Cable cabinets FGS-C and Cable end racks FG-C have space for bushes with 2 horizontal double
bars to secure the bushed or bolt clamps for cable support (aperture width 11-12 mm, branch width
of the U profile 20 mm). The bolt clamps are not part of the delivery unit and need to be ordered
separately.
There is a vertically aligned earthing busbar supplement 360 with 8 earthing series terminal
ERK-25 and 2 earthing series terminal ERK-95.
Cable cabinet FGS-C
n
n
n
n
n
n
Housing with parted roof and ground sheet, Cable feed with
foam rubber seal
Door, opens to the left, hinge can be changed
Swiveling lever handle optional with square closing or for profile
half cylinder, see page 7
Set up in line array, profile of lines 32 cm²
Usable length per inlet 1330 mm
Usable height in bush cabinet 500 mm
Type
FGS-C2
FGS-C3
1)
No of
inlets
2
3
Measurements [mm]
Height1) Width Depth Wall clearance
2100
600
400
30
2100
800
400
30
Height of top of cabinet without height of the separated roof sheet of
33 mm
Cable end racks FG-C
n
n
n
n
n
Rack with cable rack
Set up in line array and mountable back to back
Doors to be able to close at the sides or back of bush cabinet.
They have to be ordered separately if needed
Usable length per inlet 1330 mm
Usable height of bush cabinet 500 mm
Type
FG-C1
FG-C2
FG-C3
FG-C4
FG-C5
2)
3)
2
No of
inlets
1
2
3
4
5
Measurements [mm]
Height2) Width Depth3) Wall clearance
2100
400
300
52
2100
600
300
52
2100
800
300
52
2100
1000
300
52
2100
1200
300
52
Height of the rack without height of cable rack of 145 mm
Depth of rack without length of guide rings/jumper wire routing
system 105 mm
Distributor technology cabinets and racks
Earthing accessories
Earthing busbar supplement 360
n
Earthing busbar
supplement 360
a1
n
n
a2
For insulated set up in cable cabinets FGS-C and
cable end racks FG-C in bush cabinet
Set up vertically, L = 360 mm
With 8x ERK-25 and 2x ERK-95
Earthing busbar supplement ESS
n For insulated set up in cable cabinets FGS-C and cable end
racks FG-C in bush cabinet
n Set up horizontally, ERK can be added retrospectively
freely accessible
FG-C
FGS-C
Length [mm]
ERK-25 ERK-95
Type
Type
a1
a2
[piece]
ESS-1
1
160
3
1
ESS-2
2
2
360
5
1
ESS-3
3
3
240
240
10
1
ESS-4
4
340
340
15
1
ESS-5
5
440
440
20
1
Earthing series line array clamp ERK
n
For a lead connection without wire end ferrule
Type
ERK-25
Width
[mm]
12
ERK-95
22
2,5
2,5
25
25
Profile
[mm²]
bis 25 stranded wire
bis 16 fine wire
bis 95 stranded wire
bis 70 fine wire
Earthing series line array clamp ERK-30x5
n
To connect earthing busbar supplement ESS with flat conductors
of up to 30x5 mm or to connect flat earthing strip
Type
ERK-30x5
Width
[mm]
41
Earthing switch
n
n
Single pole switch 20 A incl. 2 earthing cables 4 mm2 and fixation kit
To divide earthing connections in cable cabinet FGS-C
3
Distributor technology cabinets and racks
Sealing end / Modules
Photon Meissener Technologies GmbH has a large range of sealing ends and modules with
fixation measures of 146 and 252 mm in order to seal and distribute communication and
signalling cables in inlet racks of our product range:
n
n
n
n
n
n
Cable cabinet, weatherproof KSWv
Cable cabinet, FGS-C
Cable sealing end rack FG-C
Distributor Stand up housing V-SD
Distributor Wall housing V-WD
Distributor Wall racks V-WG
Sealing end EVB 92 and EVT/T 92
n
n
n
n
n
n
To connect plastic insulated cables and equipment wire in
communication centers
EVB 92 with LSA-PLUS-Connection bar 2/10
EVT/T 92 with LSA-PLUS Separation bar 2/10
For 10, 20, 30, 50 or 100 DA
With fixation measure 146 mm
With clamping nuts to set up in inlet rack with inlet measure 152 mm
Sealing end for signaling cable SEV 92
n
n
n
n
To connect wires of signal cables with and without anti-inductive
protection, as well as cables for switches and jumper wire in signal
cable systems
with 10, 20, 40, 60 or 200 measurement separation clamps MTK
With fixation measure 146 mm
With clamping nuts to set up in inlet rack with inlet measure 152 mm
Transformer bracket
n
n
n
To fixate conductor brackets in inlet rays with the fixation
measure 146 mm and 252 mm
For conductor transformers with fixation measure [mm]
¨ 97x50 4x Ø4,5; ¨ 80x28 4x Ø4,5; center 89 2x M4
With fixation kit
Type
for conductor transformer [piece]
Transformer bracket 146
2
Transformer bracket 252
3
Labeling plate
n
n
4
Additional part for transformer bracket 146
For labeling and leading wires
Distributor technology cabinets and racks
Modules
LSA Profile Distributor racks 146
n
n
n
n
For adding LSA PROFILE Module 2/10
With fixation measurement 146 mm
With clamping nuts to install in inlet racks with inlet measure 152 mm
With fixation kit
Type
usable length [mm]
1200
1200
7501)
750
6001)
600
1) As short module also applicable
to use for
FGS-C, FG-C
KSWv-Bu3
KSWv-Bu2
for FGS-C and FG-C
Cable support 146
n
n
n
n
Additional part for LSA PROFILE distribution position 146 for
additional cable support
With fixation measurement 146 mm
With a cable support that can be regulated depth wise, can be
retrofitted with 2 cable support angles
With fixation kit
Mounting bracket 146
n
n
n
To be installed with LSA-PLUS-mounting brackets in inlet racks
With fixation measurement 146 mm
Without fixation kit
Hook Bolt M6x44
44
24
n
For fixation in modules in inlet racks
Delivery unit:
Threaded hook M6
Grommet
Hexagon nut
Modular mounting assembly bracket
n
n
n
n
n
Consists of 45 assembly brackets M
For inserting one LSA PLUS Module 2/8 or 2/10 each
Separable according to need
Set up with hole picture 1 and hole picture 2
Available with depth T 12, 22, 30 and 50 mm and the grids
measurements R 22.5, 25 and 27.5
It consists the important data:
Assembly bracket M2/8-T-R or assembly bracket M2/10-T-R
Eg. Assembly bracket M2/10-50-25 (preferred type for inlet racks)
5
Distributor technology cabinets and racks
Accessories for distributor technology cabinets and racks
Doors at side and center
n
n
To close on the sides and back of the bush cabinet of
cable end racks FG-C
With fixation kit
Middle door
Side door
Labeling of inlets
n
n
n
To label inlets in cable end racks FG-C
To be mounted to the C-bar of the cable rack
With fixation kit
Delivery unit:
Holding sheet
Labeling plate, without print
Protection foil, clear
Fixation kit
Double bar
n
n
Vertical double bar to be added retrospectively in cable cabinets
FGS-C and cable end racks FG-C
With 4 guide rings, fixation kit and material for insulation
Holding unit for jumper wire FGS-C
n
n
n
To be added retrospectively to cable cabinets FGS-C
For jumper wire leads on top, horizontal
With material for insulation and fixation kit
Holding unit for jumper wire FG-C
n
n
n
6
To be added retrospectively to cable cabinets FG-C
For jumper wire leads on top, horizontal
With material for insulation and fixation kit
Distributor technology cabinets and racks
Accessories for distributor technology cabinets and racks
Guide ring
n
n
n
To be added retrospectively in inlet racks
For installation on vertical double bars
To lead jumper wire
Delivery unit:
4 guide rings with fixation material M6
Isolator
n
n
n
Spare part for cable cabinet FGS-C and cable end racks FG-C
For insulated set up, on both side of M8
Without fixation material
Measuring clamp
n
n
For installation in cable cabinets KSWv-Bu, cable cabinets FGS-C
and cable end racks FG-C
For 4 mm test plug
Profile half cylinder closure DB
For installation in swiveling lever handle for profile half cylinder,
length 40 mm
Type/Closure
DB-brown
DB-red
DB-blue
DB-grey
DB-square
DB-21
n
Swiveling lever handle
n
Spare part for installation in cable cabinet FGS-C of the new set up
(without separate walls on the sides), see page 2
Type
V-ZB-VS-SG
for 1 profile half cylinder (L = 40 mm)
Delivery unit:
Swiveling lever handle and screws to fixate profile half cylinder
7
Specifications
Cable cabinet FGS-C
Operating range:
Protection class:
inside, climate class T1 according to DIN EN 50 125-3
IP 32 according to EN 60 529
Measurements and weight:
Type
FGS-C2
FGS-C3
1)
No of
Measurements [mm]
weight
inlets
Height1) Width
Depth wall clearance
[kg]
2
2100
600
400
30
80
3
2100
800
400
30
105
Height of top of cabinet without height of the separated roof sheet
of 33 mm
Material:
Housing
steel, powder-coated
Basic frame
steel, powder-coated
Fixation elements
steel, electrogalvanized
Earthing busbar supplement
copper nickel plated
Color:
RAL 7032 (gravel grey)
Insulation resistance Riso
Between insulated conductive
Parts at 20°C and 75 %
Relative humidity:
> 1 MOhm
Cable end racks FG-C
Operating range:
inside, climate class T1 according to DIN EN 50 125-3
Measurements and weight:
Type
FG-C1
FG-C2
FG-C3
FG-C4
FG-C5
2)
3)
No of
Measurements [mm]
weight
inlets
Height2) Width Depth3) wall clearance
[kg]
1
2100
400
300
52
34
2
2100
600
300
52
40
3
2100
800
300
52
46
4
2100
1000
300
52
52
5
2100
1200
300
52
58
Height of the rack without height of cable rack of 145 mm
Depth of rack without length of guide rings/jumper wire routing system
of 105 mm
Material:
Housing
steel, powder-coated
Fixation elements
steel, electrogalvanized
Earthing busbar supplement
copper nickel plated
8
Color:
RAL 7032 (gravel grey)
Insulation resistance Riso
Between insulated conductive
Parts at 20°C and 75 %
Relative humidity:
> 1 MOhm
Specifications
Earthing busbar supplement 360
Measurements LxWxD [mm]:
360x67x60
Material:
Clamping bar
copper, nickel plated
Earthing line array clamps
steel, electrogalvanized
Rail trestle
polystyrene
Electric effective profile:
100 mm² Cu
Earthing busbar supplement ESS
Packaging unit (PU):
1 piece
Type
Dimensions/PU LxWxH [mm]
ESS-1
250x110x135
ESS-2
450x110x135
ESS-3
585x110x135
ESS-4
830x110x135
ESS-5
1330x110x135
Material:
Clamping bar
copper, nickel plated
Earthing line array clamps
steel, electrogalvanized
Angle bracket
steel, powder coated
Rail trestle
polystyrene
Electric effective profile
100 mm² Cu
Weight [kg]
0,8
1,0
1,2
1,5
2,2
Earthing line array clamp ERK-25
Width:
Material:
Profile of connections:
12 mm
steel, electrogalvanized
2,5 - 25 mm² single or stranded conductor
2,5 - 16 mm² finely stranded conductor
Earthing line array clamp ERK-95
Width:
Material:
Profile of connections:
22 mm
steel, electrogalvanized
8 - 10 mm Ø compact round cable
25 - 95 mm² single or stranded conductor
25 - 70 mm² finely stranded conductor
Earthing line array clamp ERK-30x5
Width:
Material:
Profile of connections:
41 mm
steel, electrogalvanized
up to 30x5 flat conductor
Earthing switch
Measurements/PU LxWxH [mm]: 225x175x90
Housing material:
plastic
Color:
grey
Packaging unit (PU):
1 piece
Weight/PU
0.6 kg
Electrical values:
singe pole switch 20 A
Application Note:
Depending on the area of application there are different earthing standards for cable cabinets FGS-C.
In order to be able to use the earthing cable (rail earthing cable) one needs to use the insulated
earthing busbar supplement 360 in the bush cabinet. Additionally the entire steel housing can be
earthed. When using the earthing switch the connection to earth can be deactivated for indirect
touching for security reasons.
9
Specifications
Sealing end EVB 92 and EVT/T 92
Range of application:
Operation temperature range:
Measurements:
Type
10DA
20DA
30DA
50DA
100DA
Material:
Mounting bracket
Dust protection
Fixation elements
in housings and buildings, climate class T1
according to DIN EN 50 125-3
-25°C up to +70°C
length [mm]
width [mm]
depth [mm]
weight [kg]
80
167
116/116-1761) 0,5
102
167
116/116-1761) 0,6
125
167
116/116-1761) 0,8
170
167
100/100-1601) 1,0
282
167
100/100-1601) 1,6
1) entire depth with depth adjustable cable support angle
stainless steel
plastic, transparent
steel, electrogalvanized
LSA-PLUS Connection / separation bar 2/10:
Number of wires that can be connected per contact
Diameter of conductor with wiring of 1 wire
Diameter of conductor with wiring of 2 wires
Diameter of wires
Tools for acquisition
AC voltage
Surge voltage
max 2
0.4 to 0.9 mm, solid
0.5 to 0.65 mm, solid
0.7 to 1.6 mm
LSA-PLUS-insertion tool
2 kV
3.6 kV
Sealing end SEV 92
Range of application:
Operation temperature range:
Measurements:
Type
10
20
40
60
200
Material:
Mounting bracket
Dust protection
Fixation elements
in housings and buildings, climate class T1
according to DIN EN 50 125-3
-25°C up to +70°C
length [mm]
width [mm]
depth [mm]
75
170
78/1051)
155
170
78/1051)
205
170
78/1051)
255
170
78/1051)
1120
170
78/1051)
1) entire depth with cable support angle
Aluminum
plastic, transparent
stainless steel or steel, electrogalvanized
Measurement separation clamps MTK:
Profile of connectors
Maximal electrical load / Profile
Maximal operating voltage
10
weight [kg]
0,4
0,8
1,2
1,5
5,2
Type MTK-O/P2.5 Phoenix Contact
0.2 - 4 mm² solid
0.2 - 2.5 mm² flexible
16 A with 4 mm²
400 V
Specifications
Transformer bracket
Measurements:
Type
146
252
height [mm]
110
110
Material:
steel, powder coated
Color:
RAL 7032 (gravel grey)
width [mm]
167
273
depth [mm]
75
75
weight [kg]
0,6
0,8
Labeling plate 146
Measurements HxWxD [mm]:
80x160x35
Material:
Fixation angle
Wire guide
Labeling line
Protection foil
steel, electrogalvanized
plastic, grey
paper, white, blank
plastic, clear
LSA PROFIL distributor racks 146
Measurements:
Type
1200
750
600
Material:
Rack
Fixation element
length [mm]
width [mm]
depth [mm]
weight [kg]
3,5
1213
170
98/98-1581)
761
170
98/98-1581
2,0
611
170
98/98-1581
1,8
1) entire depth with depth adjustable cable support angle
stainless steel
stainless steel or steel, electrogalvanized
Cable support 146
Measurements HxWxD [mm]:
40x170x30/30-851
1) entire depth with depth adjustable cable support angle
Material:
stainless steel or steel, electrogalvanized
Mounting bracket 146
Measurements HxWxD [mm]:
20x167x16
Material:
steel, nickel plated
Fixation measurements for parts [mm]:
2x M5 with distance of 60mm
2x Ø6,2 with distance of 31mm
1x Ø6,2 center
Hook screw M6x44
Material:
steel, electrogalvanized
11
Specifications
Modular mounting assembly bracket
Measurements:
Type
2/8
2/10
width [mm]
84,5
104,5
Material:
stainless steel
depth [mm] max length [mm] max weight [kg]
12-50
1312,5
2,1
12-50
1312,5
2,5
Doors for FG-C
Measurements:
Type
Side door
Middle door
Middle door
Middle door
Middle door
Middle door
FG-C1
FG-C2
FG-C3
FG-C4
FG-C5
width [mm]
300
300
500
700
900
1100
height [mm]
498
498
498
498
498
498
Material:
steel, powder coated
Color:
RAL 7032 (gravel grey)
Labeling of inlets
Measurement HxWxD [mm]:
45x80x8
Material:
Fixation sheet
Labeling sign
Protection foil
steel, powder coated
paper, white, blank
plastic, clear
Color:
RAL7032 (gravel grey)
Double bar
12
Measurement LxWxD [mm]:
1426x48x20
Material:
steel, powder coated
Color:
RAL7032 (gravel grey)
Weight:
6.7 kg
weight [kg]
1,4
1,4
2,4
3,3
4,1
5,0
Specifications
Guide ring
Measurement LxWxD [mm]:
105x40x8 (24 cm² profile of wire feed through)
Material:
plastic
Color:
RAL7032 (gravel grey)
Holding unit for jumper wire bracket
Measurement HxWxD [mm]:
FGS-C
FG-C
55x15x90 (32 cm² profile of wire feed through)
80x15x90 (40 cm² profile of wire feed through)
Material:
steel powder coated
Color:
RAL7032 (gravel grey)
Isolator
Measurement HxD [mm]:
30xØ23, both sides, inside tapping M8x11
Material:
fiber glass reinforced polyamide, steel, galvanized
Color:
RAL7032 (gravel grey)
The stated specifications are standard values and cannot be taken as granted values.
13
Ordering Information
Description
14
MT-Order-No.
DB-Material-No.
Details
Seite
FGS-C2 cable cabinet with
swiveling lever handle for
profile half cylinder
6737 1 111-22
00728523
HxWxD [mm] 2100x600x400,
with 2 inlets, possible for line array
2
FGS-C2 cable cabinet with
swiveling lever handle for
DB Square closure
6737 1 111-12
00728519
HxWxD [mm] 2100x600x400,
with 2 inlets, possible for line array
2
FGS-C3 cable cabinet with
wiveling lever handle for
profile half cylinder
6737 1 111-21
00728522
HxWxD [mm] 2100x800x400, with
3 inlets, possible for line array
2
FGS-C3 cable cabinet with
swiveling lever handle for
DB Square closure
6737 1 111-11
00728518
HxWxD [mm] 2100x800x400, with
3 inlets, possible for line array
2
Cable end racks
FG-C1
6737 1 011-04
00998919
HxWxD [mm] 2245x600x300, with 1 inlets,
possible side to side or back to back installation
2
Cable end racks
FG-C2
6737 1 011-02
00552818
HxWxD [mm] 2245x600x300, with 2 inlets,
possible side to side or back to back installation
2
Cable end racks
FG-C3
6737 1 011-01
00552817
HxWxD [mm] 2245x800x300, with 3 inlets,
possible side to side or back to back installation
2
Cable end racks
FG-C4
6737 1 011-00
00552816
HxWxD [mm] 2245x1000x300, with 4 inlets,
possible side to side or back to back installation
2
Cable end racks
FG-C5
6737 1 011-03
00722066
HxWxD [mm] 2245x1200x300, with 5 inlets,
possible side to side or back to back installation
2
ESS-360
Earthing busbar supplement
6737 2 310-00
00937318
For insulated installation in bush cabinet,
horizontal with earthing line array clamps
8x ERK-25 and 2x ERK-95
(can be added retrospectively)
3
ESS-1 for FG-C1
Earthing busbar supplement
6737 2 310-10
For insulated installation in bush cabinet,
horizontal with earthing line array clamps
3x ERK-25 and 1x ERK-95
(can be added retrospectively)
3
ESS-2 for FG-C2, FGS-C2
Earthing busbar supplement
6737 2 310-20
00820861
For insulated installation in bush cabinet,
horizontal with earthing line array clamps
5x ERK-25 and 1x ERK-95
(can be added retrospectively)
3
ESS-3 for FG-C3, FGS-C3
Earthing busbar supplement
6737 2 310-30
00820863
For insulated installation in bush cabinet,
horizontal with earthing line array clamps
10x ERK-25 and 1x ERK-95
(can be added retrospectively)
3
ESS-4 for FG-C4, FGS-C4
Earthing busbar supplement
6737 2 310-40
00820864
For insulated installation in bush cabinet,
horizontal with earthing line array clamps
15x ERK-25 and 1x ERK-95
(can be added retrospectively)
3
ESS-5 for FG-C5, FGS-C5
Earthing busbar supplement
6737 2 310-50
00820865
For insulated installation in bush cabinet,
horizontal with earthing line array clamps
20x ERK-25 and 1x ERK-95
(can be added retrospectively)
3
ERK-25 (1 set = 5 pcs)
Earth terminals
6737 2 312-00
00820866
for retrofitting of earthingbusbars ESS, 12 mm width
3
ERK-95 (1 set = 5 pcs)
Earth terminals
6737 2 312-01
00820867
for retrofitting of earthingbusbars ESS, 22 mm width
3
ERK-30x5 (1 set = 2 pcs)
Earth terminals
6737 2 312-05
00821315
to connect earthing busbars ESS or a flat
conductor earthing device 41 mm width
3
Earthing switch for FGS-C
6737 2 550-00
00766476
Set for retrofitting for cable cabinets FGS-C
3
Ordering Information
Description
MT-Order-No.
DB-Material-No.
Details
Seite
EVB92-10DA
Termination bolt
6757 1 010-00
00503250
For installation in inlet racks with
fixation measure 146 mm,
with 1 LSA-PLUS connection bar 2/10
4
EVB92-T-10DA
Termination bolt
6757 1 010-01
00552803
For installation in inlet racks with
fixation measure 146 mm,
with 1 LSA-PLUS connection bar 2/10
4
EVB92-20DA
Termination bolt
6757 1 020-00
00503249
For installation in inlet racks with
fixation measure 146 mm,
with 2 LSA-PLUS connection bar 2/10
4
EVB92-T-20DA
Termination bolt
6757 1 020-01
00552802
For installation in inlet racks with
fixation measure 146 mm,
with 2 LSA-PLUS connection bar 2/10
4
EVB92-30DA
Termination bolt
6757 1 030-00
00503248
For installation in inlet racks with
fixation measure 146 mm,
with 3 LSA-PLUS connection bar 2/10
4
EVB92-T-30DA
Termination bolt
6757 1 030-01
00552801
For installation in inlet racks with
fixation measure 146 mm,
with 3 LSA-PLUS connection bar 2/10
4
EVB92-50DA
Termination bolt
6757 1 050-00
00503247
For installation in inlet racks with
fixation measure 146 mm,
with 5 LSA-PLUS connection bar 2/10
4
EVB92-T-50DA
Termination bolt
6757 1 050-01
00552800
For installation in inlet racks with
fixation measure 146 mm,
with 5 LSA-PLUS connection bar 2/10
4
EVB92-100DA
Termination bolt
6757 1 100-00
00503246
For installation in inlet racks with
fixation measure 146 mm,
with 10 LSA-PLUS connection bar 2/10
4
EVB92-T-100DA
Termination bolt
6757 1 100-01
00552799
For installation in inlet racks with
fixation measure 146 mm,
with 10 LSA-PLUS connection bar 2/10
4
Cable sheath contacting
EVB92, EVB92/T
6092 2 011-00
00820969
Spare part for termination bolt EVB92
4
SEV92-MTK10
Signaling cable end sealing
6802 1 010-00
00503251
For installation in inlet rack with
fixation measure 146 mm,
with 10 knife disconnect terminal block MTK
4
SEV92-MTK20
Signaling cable end sealing
6802 1 020-00
00503252
For installation in inlet rack with
fixation measure 146 mm,
with 20 knife disconnect terminal block MTK
4
SEV92-MTK40
Signaling cable end sealing
6802 1 040-00
00503253
For installation in inlet rack with
fixation measure 146 mm,
with 40 knife disconnect terminal block MTK
4
SEV92-MTK60
Signaling cable end sealing
6802 1 060-00
00503254
For installation in inlet rack with
fixation measure 146 mm,
with 60 knife disconnect terminal block MTK
4
SEV92-MTK60-M
Signaling cable end sealing
6802 1 060-01
00937464
For installation in inlet rack with fixation
measure 146 mm, with 60 knife disconnect
terminal block MTK, set up in the center
4
SEV92-MTK200-M
Signaling cable end sealing
6802 1 200-00
00503255
For installation in inlet rack with fixation
measure 146 mm, with 200 knife disconnect
terminal block MTK, set up in the center
4
15
Ordering Information
Description
16
MT-Order-No.
DB-Material-No.
Details
Seite
MPS 2,3 mm
test plug for MTK
6738 3 035-00
00602111
for knife disconnect terminal blocks MTK,
set of plugs consisting of test plugs
connector connections and insulation coating
-
SZG 0,6x3,5
Screw driver
6738 3 036-00
00550017
Installation tools for line array
clamps MTK; ZFK; ZFKT and ZFKD
-
RPS
Reducer plug for MTK
6738 3 037-00
00602113
for knife disconnect terminal blocks MTK,
test adapter with test point
with normal test plug (Diameter 4mm)
at testing plug connection
-
Transformer bracket 146
6737 2 400-00
00552812
Fixation measure 146 mm, with fixation kit,
to connect 2 transmission line brackets
4
Transformer bracket 252
6737 2 400-01
00552811
Fixation measure 252 mm, with fixation kit,
to connect 3 transmission line brackets
4
Label 146 for
Transformer bracket
6737 2 405-00
00820958
Additional part for transformer bracket 146
for labeling and wire lead
4
LSA PROFIL distributor rack
146-1200
6737 2 420-00
00766475
Additional part for FG-C/FGS-C, as jump wire
distributor, with fixation measure 146 mm,
for connection of LSA-PROFIL modules 2/10,
freely available length 1200 mm
5
LSA PROFIL distributor rack
146-750
6737 2 421-00
00784404
Additional part for KSWv-Bu3, or for shorter set
up for FG-C/FGS-C, with fixation measure 146 mm,
for connection of LSA-PROFIL modules 2/10,
freely available length 750 mm
5
LSA PROFIL distributor rack
146-600
6737 2 422-00
00820830
Additional part for KSWv-Bu2, or for shorter set
up for FG-C/FGS-C, with fixation measure 146 mm,
for connection of LSA-PROFIL modules 2/10,
freely available length 600 mm
5
Cable support 146
6737 2 425-00
For installation of inlet racks with
fixation measure of 146 mm
5
Cable support angle 146
6737 2 425-10
For retrofitting of cable support 146
5
Mounting bracket 146
6092 3 011-10
00766477
Additional part for FG-C/FGS-C, as jump wire
distributor, with fixation measure 146 mm,
for fixation of LSA-PROFIL modules 2/10
5
Hook bolt M6x44
6737 2 500-01
00451067
For fixation of fixation bracket 146
in inlet racks
5
Mounting bracket 2/10-50-25
modular
6973 1 210-14
00937399
Consisting of 45 mounting bracket modules in order
to connect one LSA-PLUS-Module 2/10 each,
Depending on need can be separated accordingly,
Depth (T) 50 mm, contact spacing (R) 25 mm
5
Mounting bracket 2/10-12-25,
modular
6973 1 210-11
00937400
Consisting of 45 mounting bracket modules in order
to connect one LSA-PLUS-Module 2/10 each,
Depending on need can be separated accordingly,
Depth (T) 12 mm, contact spacing (R) 25 mm
5
Ordering Information
Description
MT-Order-No.
DB-Material-No.
Details
Seite
Side door, completely,
for FG-C
6737 2 602-00
00552807
Additional part for closing bush cabinet
on sides of cable end racks FG-C
6
Middle door, completely,
for FG-C4
6737 2 603-00
00728529
Additional part for closing bush cabinet on sides
of cable end racks FG-C4 on the back side
6
Middle door, completely,
for FG-C3
6737 2 603-01
00728532
Additional part for closing bush cabinet on sides
of cable end racks FG-C3 on the back side
6
Middle door, completely,
for FG-C2
6737 2 603-02
00728533
Additional part for closing bush cabinet on sides
of cable end racks FG-C2 on the back side
6
Middle door, completely,
for FG-C5
6737 2 603-03
00728535
Additional part for closing bush cabinet on sides
of cable end racks FG-C5 on the back side
6
Middle door, completely,
for FG-C1
6737 2 603-04
Additional part for closing bush cabinet on sides
of cable end racks FG-C1 on the back side
6
Inlet labeling for
cable end racks
6737 2 360-00
00766465
For fixation on C-bar of cable rack
6
Double bar for
FG-C and FGS-C
6737 2 331-00
00552814
Double bar, vertical complete with 4 guide rings,
insulation and fixation material
6
Holding unit for jumper wire
for FG-C
6737 2 601-00
00552808
Additional part for cable end racks Fg-C,
in order to guide jumper wire on top, horizontal
6
Guide rings (1 set = 4 pcs)
for FG-C and FGS-C
6737 2 351-03
00552813
Including fixation material for
installation of double bars
7
Insulator M8 for
FG-C and FGS-C
6737 3 002-01
00451050
Additional part for cable end racks FG-C and
cable cabinets FGS-C for insulated fixation
of modules, H = 30 mm
7
Measuring clamp for
FG-C, FGS-C, KSWv-Bu
6739 3 008-00
00766480
Additional part for cable end racks FG-C,
cable cabinets FGS-C and KSWv-Bu
7
profile half cylinder
closure DB-brown
6819 2 125-10
00792324
for installation in swivelling lever handle for
profile half cylinders, length 40 (30/10) mm
7
profile half cylinder
closure DB-red
6819 2 125-11
00762323
for installation in swivelling lever handle for
profile half cylinders, length 40 (30/10) mm
7
profile half cylinder
closure DB-blue
6819 2 125-16
for installation in swivelling lever handle for
profile half cylinders, length 40 (30/10) mm
7
profile half cylinder
closure DB-grey
6819 2 125-15
for installation in swivelling lever handle for
profile half cylinders, length 40 (30/10) mm
7
profile half cylinder
closure DB-square
6819 2 125-12
00937569
for installation in swivelling lever handle for
profile half cylinders, length 40 (30/10) mm
7
profile half cylinder
closure DB 21
6819 2 125-14
00937570
for installation in swivelling lever handle for
profile half cylinders, length 40 (30/10) mm
7
V-ZB-VS-SG
accessories swivelling handle
2518 1 430-00
for V-KA, V-WD, V-SD and FGS-C
for Profile half cylinder, length 40 (30/10) mm
7
swivelling lever handle for
1 profile half cylinder
6819 2 126-01
00937466
Spare part for distribution technology,
weatherproof and FGS-C with separate walls on
the side (old set up), for profile half cylinder,
length = 40 (30/10) mm
7
swivelling handle for
cross-beard closure
(reversing prevented)
6819 2 126-02
00937467
Spare part for installation in KSWv, SKVz and
FGS-C with separate side walls (old set up)
7
17
Notes
18
Notes
19
The Quality Assurance of
Photon Meissener Technologies GmbH
has been certified according to the
international standard ISO 9001:2008.
prospekt_vert-i-bahn . Edition 04-09/12 . Subject to change
Photon Meissener Technologies GmbH
Niederauer Straße 44
D-01662 Meißen
Telefon +49 3521 726-0
Telefax +49 3521 726-177
MT@PhotonAG.com
www.MT.PhotonAG.com