FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Raven Rate Controls
In-Cab SCS Consoles
SCS 330 automatically maintains a single programmed application rate regardless of speed changes and/or changes in the number of
boom sections being used; ground speed compensated automatic rate control.
• 3 boom section control.
• Distance traveled.
• Quick and easy programming.
• Speed.
• Manual increase/decrease switch.
• Total volume applied – gallons.
• Flow rate – GPA.
• Total area worked.
SCS 450 (6 boom) sprayer flow control system allows you to set your application rate and the unit automatically maintains that rate
throughout your entire spaying job regardless of changes in vehicle speed or terrain, or the number of booms sections being used.
• Easy to read 28 digit display.
• View more data than any other system.
• Ground speed compensated automatic rate control.
• Simple cabling and installation.
• One time easy programming.
• On the go programmable rate change.
• Digital pressure display (sensor required).
• 1 product - 6 boom control.
• DGPS compatible for recording and variable rate
• Holds application rate regardless of speed or terrain.
application.
SCS 660 sprayer and granular flow control system that allows for simple and accurate control of either liquid or granular application and is
GPS compatible.
• Easy to read LCD display.
• Automatic rate +/-.
• Ground speed compensated automatic rate control.
• PWM valve control option.
• Cumulative TOTAL VOLUME applied and TOTAL AREA
• Low limit setting.
worked.
• 7 Boom control (with separate boom switch box).
PART NUMBER
063-0171-115
063-0171-183
063-0171-220
063-0172-542
DESCRIPTION
CONSOLE-SCS 330 - 3 BOOM
CONSOLE-SCS 440 - 3 BOOM
CONSOLE-SCS 450 - 6 BOOM
CONSOLE-SCS 660
www.feiinc.com
219
Fertilizer - Liquid
SCS 440 (3 boom) sprayer flow control system allows you to set your application rate and the unit automatically maintains that rate
throughout your entire spaying job regardless of changes in vehicle speed or terrain, or the number of booms sections being used.
• Easy to read 28 digit display.
• View more data than any other system.
• Ground speed compensated automatic rate control.
• Simple cabling and installation.
• One time easy programming.
• On the go programmable rate change.
• Digital pressure display (sensor required).
• 1 product - 3 boom control.
• DGPS compatible for recording and variable rate
• Holds application rate regardless of speed or terrain.
application.
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Raven Rate Controls
Fertilizer - Liquid
Field Computers
CR7 is a small, yet powerful field computer. The CR7 is a 7" lightweight field computer with customizable in-job layouts. A simple widget
concept, easily accessible settings, and ISO Universal Terminal and Task Controller capabilities make this mighty unit and affordable, plugand-play system.
KEY BENEFITS
• Ability to access settings page from inside a job
• ISO Universal Terminal and Task Controller
functionality via unlock
• Map-based navigation
• Straight A-B, A plus heading, pivot, contour, and last
• Auto field boundaries keep you organized
pass guidance
automatically
• Compatible with autosteer products including
• Interactive field/job list and map view
SmarTrax and SmarTrax MD
• Slingshot-ready for file transfer, remote support, and
OTA software updates
• Compatible with Raven AccuBoom, serial SCS
consoles, and external lightbar support
Viper 4 integrates with Raven’s full line of products into one networked platform that offers a responsive touchscreen and an intuitive,
tablet style interface with swiping features and horizontal or vertical orientation. It works with equipment of every brand, has easy job
setup with fewer touches and greater efficiency to allow for extraordinary data management capabilities.
•
•
•
•
•
Customization by user and machine.
Horizontal or vertical orientation.
Sleek design with 12.1" responsive touchscreen and
intuitive, tablet like interface with state of the art
rugged magnesium alloy enclosure.
Dust proof for tough environments.
Four camera inputs for monitoring bin levels, blind
spots, roadway operation and more.
PART NUMBER
117-2295-001
117-2295-005
117-5010-010B
117-5010-010W
220
•
•
•
•
•
•
•
DESCRIPTION
KIT-CR7 W/500S
KIT-CR7 DISPLAY ONLY
KIT-VIPER 4+ NO GPS NO ANTENNA
KIT-VIPER 4+ W/GPS W/MBA-6 ANT
www.feiinc.com
Integrated fully scalable GPS receiver.
Customizable user interface.
Set up machine and product profiles.
ISOBUS compatible.
Wireless over the air software updates.
VT with task controller capabilities.
On screen implement location with section status.
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Raven Rate Controls
Sidekick Injection and ISO Product Control
Sidekick Pro™ direct injection system sets a new standard for chemical applications of every type, with
unprecedented precision, savings, and safety. No tank mixing required and with the industry’s first automatic
calibration feature, you are ready to go in minutes. Utilize Rinse Assist to automatically flush the pump quickly and
thoroughly. The whole system is amazingly simple and pays off with greater precision, higher yields and unrivaled
efficiency.
• Adjust chemical concentration on the fly
• Up to 4 units on one machine, allowing easy
rather than spraying more or less of the
switching between fields and applications.
entire mix.
• No premixing, tank mixing, cross
• Gain flexibility in the work day with direct
contamination or clean out.
injection, you do not need to worry about
• Powerful positive displacement pump which
weather.
injects on the pressure side, closer to the
boom, for faster response time.
• Flexibility with multiple chemical
applications.
• Eliminates waste for more environmentally
• Automatically flush Sidekick Pro pump with
friendly practices.
Rinse Assist for increased reliability and
• Reduced chemical exposure means
fewer service issues.
additional safety for operator.
DESCRIPTION
KIT-SIDEKICK PRO W/TANK 1-40 OZ/MIN
KIT-SIDEKICK ISO W/TANK 5-200 OZ/MIN
KIT-ISO PROD LIQ/GRAN 16 PIN
KIT-ISO PROD LIQ/GRAN 22 PIN
CABLE-12' ISO HITCH TO RAVEN ECU
CABLE-14' ISOBUS HITCH TO RAVEN ISO ECU
CABLE-22' ISO HITCH TO RAVEN ECU
CABLE-36' ISO HITCH TO RAVEN ECU
NODE-ISO PRODUCT CONTROLLER ECU
SWITCH-FOOT ASSY ISO PRODUCT CONTROL
CABLE-ADAPTER JOHN DEERE ISO TO RAVEN ISO
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
063-0173-212
063-0173-423
117-6100-001
117-6100-003
115-0171-974
115-0171-988
115-0171-989
115-0171-975
063-0173-006
063-0173-080
115-0171-958
221
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Raven Rate Controls
Valves and Flow Meters
Fertilizer - Liquid
Control and Boom Valves
Butterfly and Control Valves
• Compatible with popular flange fittings.
• Features internal female NPT pipe threads for nonflange fittings.
Boom Valves
• High flow boom valves.
• 40 gpm at 5 psi pressure drop per valve.
• 175 psi pressure rating.
• M200 Banjo flange inlet.
• ¾" female NPT outlets or M100 flanged.
PART NUMBER
063-0171-120
063-0172-125
063-0171-894
063-0171-896
063-0171-926
063-0171-928
063-0172-039
222
•
•
Excellent wear and chemical resistance.
Available in polyethylene and stainless steel.
•
•
•
0.7 seconds on time, off time.
Plunger style valve for complete shut off.
Optional user configuration: 1 section to 10 section
banks.
DESCRIPTION
VALVE-ASSY 3/4" CONTROL
VALVE-1"POLY CONTROL RAVEN 1"FPT & FLANGED ENDS
VALVE-ASSY CONTROL 1-1/2" POLY BUTTERFLY
VALVE- ASSY CONTROL 1-1/2" 90 DEG BUTTERFLY PACKARD
VALVE-BOOM SINGLE MFLD
VALVE-3-BOOM SECTION ASSY
VALVE- 5 BOOM SECTION ASSY
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Raven Rate Controls
Valves and Flow Meters
Flow Meters
The RFM15, M200 flanged flow meter is a durable, reliable meter that has a flow rate range extending from .3 to 15 GPM. This flow meter
is designed to effectively calculate the rate of flow of fluids in a system.
RFM60P features high density polyethylene construction with 1-60 gpm and is M200 Banjo flanged. It is for use with chemicals and liquid
fertilizer with 1-½" FPT fitting size.
RFM100 Polypropylene housing, 5-100 gpm and is M200 Banjo flanged with 2" FNPT inlet and outlet. It is for use with chemicals and
liquid fertilizer.
RFM200P features high density polyethylene construction with 15-200 gpm flow rate, 3" NPT female inlet and outlet with 90 psi rating. It
is for use with chemical, liquid fertilizer and fertilizer with high acid content.
External flow sensor 063-0171-669 sensor is for RFM60 flow meter.
PART NUMBER
063-0172-040
063-0171-666
063-0171-793
063-0171-066
063-0159-751
063-0171-669
DESCRIPTION
METER-FLOW RFM15 0.3-15 GPM M200 FLANGED
METER-FLOW RFM60S 1-60 GPM SS 1-1/2" FPT
METER-FLOW RFM60P 1-60 GPM POLY M200 FLANGED
METER-FLOW RFM100P 5-100 GPM POLY M220 FLANGED
METER-FLOW RFM200P 15-200 GPM M300 FLANGED
SENSOR ASSY-EXTERNAL RAVEN FLOWMETER
www.feiinc.com
223
Fertilizer - Liquid
RMF60S flow meter has 303 stainless steel housing and a capacity of 1-60 gpm with a pressure rating of 500 psi. The RFM60S has a 1½" FPT inlet and a 1-½" FPT outlet.
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Raven Rate Controls
Cables
DESCRIPTION
CABLE-ASSY 3' CONSOLE 450/460
CABLE-10' CONSOLE CONTROL SCS440 3-PIN WEATHER PACK
CABLE-3' CONSOLE SCS 4400
CABLE-CONSOLE 4400 20'
CABLE-6' FLOW CONTRL 3BOOM SCS440 3-PIN WEATHER PACK
CABLE-12' FLOW CONTRL 3BOOM SCS440 3-PIN WEATHER PACK
CABLE-12' FLOW 3BM SPADE TERMINALS
CABLE-12' FLOW CONTRL 6BOOM SCS450/460 3-PIN WEATHER PACK
CABLE-24' FLOW 450/660 3-PIN WEATHER PACK
CABLE-12' FLOW EXT 16 PIN
CABLE-24' FLOW EXT 16 PIN
CABLE-24' EXT SCS 460/660
CABLE-10' CONSOLE SCS440 OLD STYLE
CABLE-12' FLOW SCS440 OLD STYLE
CABLE-12' EXTENSION SCS440 OLD STYLE
CABLE-24' EXTENSION SCS440 OLD STYLE
Fertilizer - Liquid
PART NUMBER
115-0159-707
115-0171-085
115-0171-299
115-0171-300
115-0159-858
115-0171-055
115-0159-859
115-0171-129
115-0171-206
115-0159-856
115-0159-857
115-0159-717
115-0159-418
115-0159-405
115-0159-409
115-0159-414
224
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
GPS and Guidance
Raven Guidance
The Cruizer II can make your life easier and less stressful. You get sophisticated guidance technology that is simple and easy to use, with
your choice of four field patterns. Easy installation and operation gets you in and out of the field in a hurry. The Cruizer II brings greater
accuracy and efficiency to a variety of operations. You can also move the unit easily from tractor to tractor, which makes a great second
guidance unit for equipment and applications that do not require upper end capability.
•
•
•
•
Color 5.7" touch screen display.
Simple installation.
Greater accuracy and efficiency in a variety of
operations.
Cost efficient RTK.
Built-in 10 Hz DGPS receiver and external DGPS
antenna for accurate sub-meter guidance.
Integrated lightbar system for added confidence and
visual support.
Enhanced last pass guidance with automatic
correction simplifies contour and irregularly shaped
fields and prevents repeating errors.
PART NUMBER
117-0171-247
117-0171-249
117-0171-245
117-0171-250
•
•
•
•
•
Bird’s eye view and down field 3D perspective for
checking coverage and keeping you on line.
Straight A-B, last pass, fixed contour and pivot field
patterns for greater accuracy, speed and
convenience..
Record field boundaries, coverage, applied acres and
field markers.
Shapefile, KML and bitmap files for enhanced record
keeping.
Simple upgrades for assisted steering and automatic
planter and boom section controls for greater
precision, savings and performance.
DESCRIPTION
KIT-CRUIZER II PATCH ANTENNA
KIT-CRUIZER II W/HELIX ANTENNA
KIT-CRUIZER II WEATHER RESIST W/HELIX ANTENNA
KIT-CRUIZER II WEATHER RESIST W/PATCH ANTENNA
www.feiinc.com
225
Fertilizer - Liquid
•
•
•
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Flow Dividers and Blockage Monitors
Fertilizer - Liquid
John Blue Flow Dividers
The CDS-John Blue “Exacto-Flow” flow divider when used in conjunction with the liquid metering pump is guaranteed to deliver. The FD1200 and FD-2000 series accurately divides liquid products across a wide range of application rates. Field tests have proven this is the
most accurate distribution automatic flow divider system on the market. These flow dividers provide unsurpassed accuracy with
application rates as low as 2.4 GPA and as high as 80 GPA on 30 inch row spacing at 5 mph.
The VisaGage II flow monitor enables growers to easily monitor flow rates of liquid fertilizers and herbicides, which helps to improve
efficiency and profitability. These flow monitors for spraying or fertilizer applications come in single columns or in sets of four flow monitor
assemblies. Plus most CDS-John Blue flow monitor parts are interchangeable with other brands already on the market. The VisaGage II is
manufactured with chemical resistant polypropylene adapters and clear PVC body with an additive for UV protection. Viton O-rings are
standard. There are no electronic parts that could potentially fail. Available in spray or flow types.
Proper Application = Increased Yields
• With the CDS-John Blue VisaGage II you will know immediately if an outlet is plugged, thus causing possible variations in your
application rates.
• So easy – see the balls in line and know your rate is uniform.
• When one ball is lower you know there is a restriction at the outlet, hose or opener supplied by that flow monitor.
• A ball higher than the others is an indication that hoses or fittings supplied by that specific flow monitor is broken or has a leak.
PART NUMBER
FD-1210
FD-1210-ADJ
FD-2010
SMFD1
SMFD4
SMSS1
SMSS4
226
DESCRIPTION
DIVIDER-FLOW 12 PORT EXACTO-FLOW SS
DIVIDER-FLOW 12 PORT ADJ
DIVIDER-FLOW 20 PORT EXACTO-FLOW SS
MONITOR-FLOW DIVIDER 3/8" FPT SINGLE MONITOR
MONITOR-FLOW DIVIDER 3/8" FPT 4 MONITOR ASSY
MONITOR-SPRAY 3/8" FPT SINGLE MONITOR
MONITOR-SPRAY 1/2" FPT INLET 3/8" FPT OUTLET 4 MONITOR ASSY
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Repair Kits and Accessories
Fertilizer - Liquid
www.feiinc.com
227
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Flow Dividers and Blockage Monitors
John Blue Flow Dividers
Fertilizer - Liquid
Repair Kits and Accessories
PART NUMBER
115406
115433
115407-A
115434-A
116064
S-350
SMPT-0001
SMPT-0003
SMPT-0004
SMPT-0006
SMPT-0007
SMPT-0008
SMPT-0014
SMPT-0016
SMPT-0019
SMPT-0030
SMPT-0034
SMPT-0050
SMPT-0051
SMPT-0052
SMPT-0053
228
DESCRIPTION
KIT-NEEDLE & SEAL FD1200
KIT-NEEDLE & SEAL FD2000
KIT-SEAL FD1210
KIT-SEAL FOR FD-2010
KIT-ADJ SPRING CONVERSION
PLUG-1/4" VENT PLATED
BODY-FLOW MONITOR SPRAY TYPE
ADAPTER-3/8" NPT PORT
ADAPTER-PORT 1/2"NPT
CLIP-RETAINER
O-RING-VITON #212
CAP-END
MANIFOLD-TEE ASSY
BALL-GREEN POLYP
BALL-BLUE GLASS
ADAPTER-ELBOW 3/8" NPT TO 1/2" BARB PP
O-RING-VITON #112 ORIFICE DISC
BALL-PLASTIC YELLOW
ADAPTER-ELBOW 1/4" PUSH CON NO O-RING
ADAPTER-ELBOW 5/16" PUSH CON NO O-RING
ADAPTER-ELBOW 3/8" PUSH CON NO O-RING
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Flow Dividers and Blockage Monitors
MicroTrak SafeGuard
SafeGuard Blockage Monitor electronically detects blockages and alerts you with an audible
alarm and a visual display of the blocked row’s number. Reduce over and under application,
save money, and apply liquid fertilizer with confidence without having to watch flow monitors or outlets. Take back control of your
application and put more dollars in your pocket.
Instantly detects and alerts the operator of blockages without seeing the sensor.
Audible alarm immediately alerts the operator of blockage.
Monitors all runs continuously.
Alerts the operator regardless of lighting conditions.
Same performance, day or night, rain or shine.
System is not affected by cloudy or dark liquids.
Achieve full benefits of liquid fertilizer application knowing all rows are applying.
Blockage notification for a wide variety of product applications.
Fertilizer - Liquid
•
•
•
•
•
•
•
•
SafeGuard Console – Compact in-cab display that monitors, identifies and reacts to immediately alert you to a blockage. Easy to use,
on/off and volume adjustments are the only user controls. No calibration is required. Turn on the console, and it will detect how many rows
are being monitored and their location.
SafeGuard Blockage Sensors – Blocked rows are identified by numbers on the display and with an audible alarm. Sensors monitor
each row for immediate notification. Sensors can be ganged together, mounted individually over the row, or a combination of both. Daisy
chain connectivity between blockage sensors for easy and clean installations. Blockage sensors are easily ganged and assembled with Orings and U-clips, and are interchangeable with most other visual flow monitor fittings. Over the row installations clean up plumbing and
eliminate excessive hose lengths.
PART NUMBER
MT01999
MT02000
MT01994
MT01995
MT01838
MT01839
DESCRIPTION
KIT-CONSOLE SAFEGUARD WITH BLACK AMP CONNECTORS
KIT-ISO SAFEGUARD WITH BLACK AMP CONNECTOR
KIT-BLOCKAGE SENSOR WITH SHORT LEAD BLACK AMP CONNECTOR
KIT-BLOCKAGE SENSOR WITH LONG LEAD BLACK AMP CONNECTOR
KIT-BLOCKAGE SENSOR WITH SHORT LEAD PRE-2017
KIT-BLOCKAGE SENSOR WITH LONG LEAD PRE-2017
www.feiinc.com
229
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Fertilizer - Liquid
Hose Reels
ATVHR-H 30' hose, spray wand and mounting bracket.
HR030-HL 100' 3/4" hose reel with hose and lance on stand. Features complete reel locking device to prevent hose unwinding in transit.
The lightweight, durable reel is constructed of rust free UV stabilized poly with rotating handle for easy winding.
HR050 bare hose reel with stand for 160' of 3/8" hose. Features complete reel locking device to prevent hose unwinding in transit. The
lightweight, durable reel is constructed of rust free UV stabilized poly with rotating handle for easy winding.
HR100 bare hose reel with stand for 100' of 3/4" hose. Features complete reel locking device to prevent hose unwinding in transit. The
lightweight, durable reel is constructed of rust free UV stabilized poly with rotating handle for easy winding.
HR100-HL 100' 3/4" hose reel with hose and lance on stand. Features complete reel locking device to prevent hose unwinding in transit.
The lightweight, durable reel is constructed of rust free UV stabilized poly with rotating handle for easy winding.
HR200 Super Hose Reel is a manual crank hose reel for 85' of 2" hose. The hose reels out between two rolling guides for easy retrieval.
The HR200 features a heavy duty frame and spool with a large hose capacity and easy mount base, dimensions: 29" W x 29" D x 27" H.
HRE200SS Super Hose Reel is 12 Volt electric for 85' of 2" hose. The hose reels out between two rolling guides for easy retrieval. The
HRE200SS features a stainless steel swivel, heavy duty frame and spool with a large hose capacity and easy mount base, dimensions: 29"
W x 29" D x 27" H.
EP8238-26-27-043 is designed for 1-1/2" or 2" ID bulk hose for bulk transfer, fueling applications, chemical transfer, general dispensing,
suction or discharge. The heavy duty reel is designed for longer lengths and larger diameters of hose with power rewind.
HRE300SS Super Hose Reel is 12 Volt electric for 85' of 3" hose. The hose reels out between two rolling guides for easy retrieval. The
HRE300SS features a stainless steel swivel, heavy duty frame and spool with a large hose capacity and easy mount base, dimensions: 30"
W x 41" D x 39" H.
230
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Hose Reels
PART NUMBER
ATVHR-H
HR030-HL
HR050
HR100
HRE100SS
HR100-HL
HR200
HRE200SS
EP8238-26-27-043
HRE300SS
DESCRIPTION
REEL-HOSE W/30' HOSE, SPARY WAND & MOUNTING BRACKET
REEL-HOSE 100' W/HOSE AND LANCE ON STAND
REEL-HOSE 160' BARE FOR 3/8" HOSE
REEL-HOSE 100' BARE FOR 3/4" HOSE
REEL-HOSE 1" ELEC W/SS SWIVEL
REEL-HOSE 100' FOR 3/4" HOSE W/HOSE AND LANCE
REEL-HOSE MANUAL 2" X 85'
REEL-HOSE 2" ELEC W/SS SWIVEL 12V 85'
REEL-HOSE 2" ELEC 12V 043 MOTOR
REEL-HOSE 3" ELEC W/SS SWIVEL 12V 85'
Fertilizer - Liquid
www.feiinc.com
231
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
GreenLeaf Fittings
GatorLock Couplings
GatorLock "B" Series Couplings
ENHANCED SAFETY Exclusive cam lever locking mechanism helps to reduce the possibility of unintentionally opening the cam levers,
which could result in personal injury and costly spills.
Fertilizer - Liquid
SMOOTH SEALING SURFACE Parting lines have been removed from the sealing area of the male couplings,
which reduces the possibility of leaks and wear to the rubber seal.
GatorLock™ Coupling Features:
• Patent locking arms to reduce possibility of unintentional opening of cam levers during use.
• Glass filled polypropylene.
• 1/2" through 2" maximum operating pressure 125 psi at 70º F.
• 3" maximum operating pressure 75 psi at 70º F.
• EPDM gaskets.
• 1/2" series couplings interchange with 3/4", coupling ends are 3/4".
• 1-1/4" series couplings interchange with 1", coupling ends are 1".
PART NUMBER
GLP050B
GLP075B
GLP100B
GLP125B
GLP150B
GLP200B
GLP300B
DESCRIPTION
COUPLER-3/4" FML X 1/2" MNPT GATORLOCK
COUPLER-3/4" FML X 3/4" MNPT GATORLOCK
COUPLER-1" FML X 1" MNPT GATORLOCK
COUPLER-1" FML X 1-1/4" MNPT GATORLOCK
COUPLER-1-1/2" FML X 1-1/2" MNPT GATORLOCK
COUPLER-2" FML X 2" MNPT GATORLOCK
COUPLER-3" FML X 3" MNPT GATORLOCK
GatorLock "C" Series Couplings
PART NUMBER
GLP050C
GLP075C
GLP100C
GLP125C
GLP150C
GLP200C
GLP300C
232
DESCRIPTION
COUPLER-3/4" FML X 1/2" HB GATORLOCK
COUPLER-3/4" FML X 3/4" HB GATORLOCK
COUPLER-1" FML X 1" HB GATORLOCK
COUPLER-1" FML X 1-1/4" HB GATORLOCK
COUPLER-1-1/2" FML X 1-1/2" HB GATORLOCK
COUPLER-2" FML X 2" HB GATORLOCK
COUPLER-3" FML X 3" HB GATORLOCK
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
GreenLeaf Fittings
GatorLock Couplings
GatorLock "D" Series Couplings
PART NUMBER
GLP050D
GLP075D
GLP100D
GLP125D
GLP150D
GLP200D
GLP300D
DESCRIPTION
COUPLER-3/4" FML X 1/2" FNPT GATORLOCK
COUPLER-3/4" FML X 3/4" FMPT GATORLOCK
COUPLER-1" FML X 1" FNPT GATORLOCK
COUPLER-1" FML X 1-1/4" FNPT GATORLOCK
COUPLER-1-1/2" FML X 1-1/2" FNPT GATORLOCK
COUPLER-2" FML X 2" FNTP GATORLOCK
COUPLER-3" FML X 3" FNPT GATORLOCK
GatorLock "Cap" Series Couplings
PART NUMBER
GLP050CAP
GLP075CAP
GLP100CAP
GLP150CAP
GLP200CAP
GLP300CAP
DESCRIPTION
CAP-COUPLER 1/2" FML GATORLOCK
CAP-COUPLER 3/4" FML GATORLOCK
CAP-COUPLER 1" FML GATORLOCK
CAP-COUPLER 1-1/2" FML GATORLOCK
CAP-COUPLER 2" FML GATORLOCK
CAP-COUPLER 3" FML GATORLOCK
PART NUMBER
GLV200FP
GLV300FP
Fertilizer - Liquid
Six Bolt Ball Valves
DESCRIPTION
VALVE-BALL 2" FP 6 BOLT
VALVE-BALL 3" FP 6 BOLT
Hose Barbs
PART NUMBER
CN050P
CN075050P
CN075P
CN075100P
CN100075P
CN100P
CN100125P
CN125100P
CN125P
CN150125P
CN150P
CN150200P
CN200150P
CN200P
CN300P
DESCRIPTION
BARB-1/2" MNPT X 1/2" POLY HB
BARB-3/4" MNPT X 1/2" POLY HB
BARB-3/4" MNPT X 3/4" POLY HB
BARB-3/4" MNPT X 1" POLY HB
BARB-1" MNPT X 3/4" POLY HB
BARB-1" MNPT X 1" POLY HB
BARB-1" MNPT X 1-1/4" POLY HB
BARB-1-1/4" MNPT X 1" POLY HB
BARB-1-1/4" MNPT X 1-1/4" POLY HB
BARB-1-1/2" MNPT X 1-1/4" POLY HB
BARB-1-1/2" MNPT X 1-1/2" POLY HB
BARB-1-1/2" MNPT X 2" POLY HB
BARB-2" MNPT X 1-1/2" POLY HB
BARB-2" MNPT X 2" POLY HB
BARB-3" MNPT X 3" POLY HB
www.feiinc.com
233
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
GreenLeaf Fittings
Cam Lever Couplings
"A" Series Adapter
PART NUMBER
GLP050A
GLP075A
GLP100A
GLP125A
GLP150A
GLP150125A
GLP200A
GLP200300A
GLP300A
GLP400A
DESCRIPTION
ADAPTER-3/4" ML X 1/2" FNPT
ADAPTER-3/4" ML X 3/4" FNPT
ADAPTER-1" ML X 1" FNPT
ADAPTER-1" ML X 1-1/4" FNPT
ADAPTER-1-1/2" ML X 1-1/2" FNPT
ADAPTER-1-1/2" ML X 1-1/4" FNPT
ADAPTER-2" ML X 2" FNPT
ADAPTER-2" ML X 3" FNPT
ADAPTER-3" ML X 3" FNPT
ADAPTER-4" ML X 4" FNPT
Fertilizer - Liquid
"B" Series Non-Locking Coupling
Non-Locking Cam Lever Coupling Features:
• Glass filled polypropylene.
• 1/2" through 2" maximum operating pressure 125 psi at 70º F.
• 3" maximum operating pressure 75 psi at 70º F.
• EPDM gaskets.
• 1/2" series couplings interchange with 3/4", coupling ends are 3/4".
• 1-1/4" series couplings interchange with 1", coupling ends are 1".
PART NUMBER
GLP050BNL
GLP075BNL
GLP100BNL
GLP125BNL
GLP150BNL
GLP150125BNL
GLP200BNL
GLP300BNL
GLP300B200A
GLP400BNL
234
DESCRIPTION
COUPLER-3/4" FML X 1/2" MNPT NON LOCKING
COUPLER-3/4" FML X 3/4" MNPT NON LOCKING
COUPLER-1" FML X 1" MNPT NON LOCKING
COUPLER-1" FML X 1-1/4" MNPT NON LOCKING
COUPLER-1-1/2" FML X 1-1/2" MNPT NON LOCKING
COUPLER-1-1/2" FML X 1-1/4" MNPT NON LOCKING
COUPLER-2" FML X 2" MNPT NON LOCKING
COUPLER-3" FML X 3" MNPT NON LOCKING
COUPLER-2" FML X 3" MNPT NON LOCKING
COUPLER-4" FML X 4" MNPT NON LOCKING
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
GreenLeaf Fittings
Cam Lever Couplings
"C" Series Non-Locking Coupling
PART NUMBER
GLP050CNL
GLP075CNL
GLP100CNL
GLP125CNL
GLP150CNL
GLP150125CNL
GLP200CNL
GLP300CNL
GLP400CNL
DESCRIPTION
COUPLING-3/4" FML X 1/2" HB NON LOCKING
COUPLING 3/4" FML X 3/4" HB NON LOCKING
COUPLING-1" FML X 1" HB NON LOCKING
COUPLING 1" FML X 1-1/4" HB NON LOCKING
COUPLING-1-1/2" FML X 1-1/2" HB NON LOCKING
COUPLING-1-1/2" FML X 1-1/4" HB NON LOCKING
COUPLING-2" FML X 2" HB NON LOCKING
COUPLING-3" FML X 3" HB NON LOCKING
COUPLING-4" FML X 4" HB NON LOCKING
"D" Series Non-Locking Coupling
DESCRIPTION
COUPLER-3/4" FML X 1/2" FNPT NON LOCKING
COUPLER-3/4" FML X 3/4" FNPT NON LOCKING
COUPLING-1" FML X 1" FNPT NON LOCKING
COUPLING-1" FML X 1-1/4" FNPT NON LOCKING
COUPLING-1-1/2" FML X 1-1/2" FNPT NON LOCKING
COUPLING-1-1/2" FML X 1-1/4" FNPT NON LOCKING
COUPLER-2" FML X 2" FNPT NON LOCKING
COUPLER-3" FML X 3" FNPT NON LOCKING
COUPLER-4" FML X 4" FNPT NON LOCKING
Fertilizer - Liquid
PART NUMBER
GLP050DNL
GLP075DNL
GLP100DNL
GLP125DNL
GLP150DNL
GLP150125DNL
GLP200DNL
GLP300DNL
GLP400DNL
"E" Series Adapter
PART NUMBER
GLP050E
GLP075E
GLP100E
GLP125E
GLP150E
GLP150125E
GLP200E
GLP300E
GLP400E
DESCRIPTION
ADAPTER-3/4" ML X 1/2" HB
ADAPTER-3/4" ML X 3/4" HB
ADAPTER-1" ML X 1" HB
ADAPTER-1" ML X 1-1/4" HB
ADAPTER-1-1/2" ML X 1-1/2" HB
ADAPTER-1-1/2" ML X 1-1/4" HB
ADAPTER-2" ML X 2" HB
ADAPTER-3" ML X 3" HB
ADAPTER-4" ML X 4" HB
"F" Series Adapter
PART NUMBER
GLP050F
GLP075F
GLP100F
GLP125F
GLP150F
GLP150125F
GLP200F
GLP200300F
GLP300F
GLP400F
DESCRIPTION
ADAPTER-3/4" ML X 1/2" MNPT
ADAPTER-3/4" ML X 3/4" MNPT
ADAPTER-1" ML X 1" MNPT
ADAPTER-1" ML X 1-1/4" MNPT
ADAPTER-1-1/2" ML X 1-1/2" MNPT
ADAPTER-1-1/2" ML X 1-1/4" MNPT
ADAPTER-2" ML X 2" MNPT CAM LOCK
ADAPTER-2" ML X 3" MNPT
ADAPTER-3" ML X 3" MNPT CAM LOCK
ADAPTER-4" ML X 4" MNPT
www.feiinc.com
235
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
GreenLeaf Fittings
Cam Lever Couplings
"CAP" Series Non-Locking Coupling
PART NUMBER
GLP050CAPNL
GLP075CAPNL
GLP100CAPNL
GLP150CAPNL
GLP200CAPNL
GLP300CAPNL
GLP400CAPNL
DESCRIPTION
CAP-1/2" NON LOCKING
CAP-3/4" NON LOCKING
CAP-1" NON LOCKING
CAP-1-1/2" NON LOCKING
CAP-2" NON LOCKING
CAP-3" NON LOCKING
CAP-4" NON LOCKING
"PL" Series Plug
Fertilizer - Liquid
PART NUMBER
GLP050PL
GLP075PL
GLP100PL
GLP150PL
GLP200PL
GLP300PL
GLP400PL
DESCRIPTION
PLUG-ADAPTER 1/2" ML
PLUG-ADAPTER 3/4" ML
PLUG-ADAPTER 1" ML
PLUG-ADAPTER 1-1/2" ML
PLUG-ADAPTER 2" ML
PLUG-ADAPTER 3" ML
PLUG-ADAPTER 4" ML
Hose and Tubing
Hose - Suction and Discharge
Style K PVC Hose
Application: A high quality flexible and long-lasting suction and discharge hose for general purpose uses including
water and fertilizer solutions. Construction: Smooth bore hose made of flexible abrasion resistant extruded clear PVC
with a rigid gray PVC helix in 100' rolls, priced per foot.
PART NUMBER
12018000
12018005
12018010
12018015
12018020
12018025
12018030
12018035
236
DESCRIPTION
HOSE-3/4" PVC- CLEAR SUCTION 90 PSI
HOSE-1" PVC- CLEAR SUCTION 90 PSI
HOSE-1-1/4" PVC- CLEAR SUCTION 80 PSI
HOSE-1-1/2"PVC- CLEAR SUCTION 70 PSI
HOSE-2" PVC-CLEAR SUCTION 70 PSI
HOSE-2-1/2"PVC-CLEAR SUCTION 70 PSI
HOSE-3" PVC-CLEAR SUCTION 60 PSI
HOSE-4" PVC-CLEAR SUCTION 55 PSI
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Hose and Tubing
Hose - Suction and Discharge
Bumble Bee Hose
Application: Chemical and fertilizer solution suction and discharge transfer hose, lightweight with good flexibility,
medium grade. Construction: Green EPDM with black polyethylene helix reinforcement in 100' rolls, priced per foot.
Note: Green hose is stocked, yellow available by special order.
PART NUMBER
12012795
12012797
12012800
12012805
12012807
12012810
12012815
DESCRIPTION
HOSE-1" 300-EPDM SUCTION BUMBLEBEE 50 PSI
HOSE-1-1/4" 300-EPDM SUCTION BUMBLEBEE 50 PSI
HOSE-1-1/2" 300-EPDM SUCTION BUMBLEBEE 50 PSI
HOSE-2" 300-EPDM SUCTION BUMBLEBEE 50 PSI
HOSE-2-1/2" 300-EPDM SUCTION BUMBLEBEE 50 PSI
HOSE-3" 300-EPDM SUCTION BUMBLEBEE 43 PSI
HOSE-4" 300-EPDM SUCTION BUMBLEBEE 38 PSI
Black Enforcer Hose
Application: Chemical and fertilizer solution suction and discharge transfer hose, used when higher pressures than
Style K PVC is required. Construction: Smooth bore EPDM rubber hose with a polyethylene helix and black fabric
reinforcement cover in 100' rolls, priced per foot.
Fertilizer - Liquid
PART NUMBER
12013000
12013005
12013010
12013020
DESCRIPTION
HOSE-1-1/4" ENFORCER 390-SD EPDM SUCTION 100 PSI
HOSE-1-1/2" ENFORCER 390-SD EPDM SUCTION 100 PSI
HOSE-2" ENFORCER 390-SD EPDM SUCTION 100 PSI
HOSE-3" ENFORCER 390-SD EPDM SUCTION 90 PSI
Wire Braid EPDM Rubber Hose
Application: Suction and discharge hose for most diluted chemicals. Construction: EPDM tube reinforced with
synthetic cord and spiral steel wire for added flexibility and crush resistance with black EPDM cover in 100' rolls, priced
per foot.
PART NUMBER
12003490
12003501
12004001
12004106
12004508
12005008
DESCRIPTION
HOSE-EPDM RUBBER SUCTION 1-1/4" REINFORCED 150 PSI
HOSE-EPDM RUBBER SUCTION 1-1/2" REINFORCED 150 PSI
HOSE-EPDM RUBBER SUCTION 2" REINFORCED 150 PSI
HOSE-EPDM RUBBER SUCTION 2-1/2" REINFORCED 150 PSI
HOSE-EPDM RUBBER SUCTION 3" REINFORCED 150 PSI
HOSE-EPDM RUBBER SUCTION 4" REINFORCED 150 PSI
www.feiinc.com
237
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Hose and Tubing
Hose - Suction and Discharge
Chem-Flex Hose
Application: A versatile chemical transfer hose that will handle up to 90% of all known chemicals. Construction:
Special cross-linked polyethylene tube is reinforced with plies of textile and a dual spring wire helix. The cover is green
EPDM to identify chemical use in 100' rolls, priced per foot.
PART NUMBER
12094600
12094602
12094604
12094608
12094612
DESCRIPTION
HOSE-1" CHEMFLEX X-LINK 200 PSI
HOSE-1-1/4" CHEMFLEX X-LINK 200 PSI
HOSE-1-1/2" CHEMFLEX X-LINK 200 PSI
HOSE-2" CHEMFLEX X-LINK 200 PSI
HOSE-3" CHEMFLEX X-LINK 200 PSI
EPDM Rubber Spray Hose
Application: Used for spraying applications. Construction: EPDM tube reinforced with 2 and 4 spiral polyester yarn
with black EPDM cover, priced per foot.
Fertilizer - Liquid
PART NUMBER
10028507
10029503
10030005
10030501
10031001
10031508
10040507
10041007
10041008
238
DESCRIPTION
HOSE-1/4" BLACK EPDM SPRAY 200 PSI
HOSE-3/8" BLACK EPDM SPRAY 200 PSI
HOSE-1/2" BLACK EPDM SPRAY 200 PSI
HOSE-5/8" BLACK EPDM SPRAY 200 PSI
HOSE-3/4" BLACK EPDM SPRAY 200 PSI
HOSE-1" BLACK EPDM SPRAY 200 PSI
HOSE-1-1/4" BLACK EPDM SPRAY 200 PSI
HOSE-1-1/2" BLACK EPDM SPRAY 200 PSI
HOSE-2" BLACK EPDM SPRAY 200 PSI
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Hose and Tubing
Hose - Suction and Discharge
Clear Vinyl and Reinforced Vinyl Hose
Clear Vinyl Tubing Application: Site gauge and safety water can usage. Construction: Clear extruded
vinyl tubing in 100' rolls, priced per foot.
Reinforced Clear Vinyl Tubing Application: For use when a clear hose is required that needs a higher
working pressure than non-reinforced vinyl tubing such as air, water and pneumatic lines. Construction:
Crystal clear polyvinyl chloride reinforced with a synthetic cord in 100' rolls, priced per foot.
DESCRIPTION
HOSE-1/4" CLEAR VINYL 1/16" WALL 55 PSI
HOSE-1/4" CLEAR VINYL 1/8" WALL 60 PSI
HOSE-3/8" CLEAR VINYL 1/8" WALL 55 PSI
HOSE-1/2" CLEAR VINYL 1/8" WALL 45 PSI
HOSE-5/8" CLEAR VINYL 1/8" WALL 30 PSI
HOSE-3/4" CLEAR VINYL 1/8" WALL 35 PSI
HOSE-7/8" CLEAR VINYL 1/8" WALL 40 PSI
HOSE-1"CLEAR VINYL 1/8"WALL 25 PSI
HOSE-1-1/4"CLEAR VINYL 1/8" WALL 20 PSI
HOSE-3/8" BRAIDED VINYL 225 PSI
HOSE-1/2" BRAIDED VINYL 200 PSI
HOSE-5/8" BRAIDED VINYL 175 PSI
HOSE-3/4" BRAIDED VINYL 150 PSI
HOSE-1" BRAIDED VINYL 125 PSI
Fertilizer - Liquid
PART NUMBER
15005009-16
15005009
15005505
15006005
15006501
15007001
15007501
15008008
15008055
K3150-38
K3150-50
K3150-58
K3150-75
K3150-100
Blue Lay Flat Hose
Application: Economical water discharge hose. Construction: Tube and cover are blue PVC and reinforcement is a
spiral of high grade cord fabric in 300' rolls, priced per foot.
PART NUMBER
13026505
13027005
13028001
13028508
13030815
DESCRIPTION
HOSE-PVC LAY FLAT 1-1/2" BLUE DISCHARGE
HOSE-PVC LAY FLAT 2" BLUE DISCHARGE
HOSE-PVC LAY FLAT 3" BLUE DISCHARGE
HOSE-PVC LAY FLAT 4" BLUE DISCHARGE
HOSE-PVC LAY FLAT 10" BLUE DISCHARGE
www.feiinc.com
239
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Hose and Tubing
Hose - Suction and Discharge
Black Air Seeder Hose
112BK series air seeder hose is an economical, solid black PVC hose commonly used for the transfer of seed on
agricultural air seeders. Its cover is resistant to UV and weathering and stands up better than other white/translucent
alternatives on the market. Available in 100' rolls, priced per foot.
PART NUMBER
112BK-1
112BK-11/4
112BK-11/2
112BK-21/2
112BK-3
DESCRIPTION
HOSE-BLACK AIR SEEDER 1"
HOSE-BLACK AIR SEEDER 1-1/4"
HOSE-BLACK AIR SEEDER 1-1/2"
HOSE-BLACK AIR SEEDER 2-1/2"
HOSE-BLACK AIR SEEDER 3"
Hose Clamps
Stainless Steel Worm Gear Clamps
1/4" hex head screw seals with only 10 inch pounds of screw torque. One piece house with no spot welds, easy to
install in confined areas, 5/16" band width, marine grade band housing and screw.
Fertilizer - Liquid
PART NUMBER
403-06
403-08
403-12
403-16
403-24
403-32
403-48
403-64
403-H116
240
DESCRIPTION
CLAMP-HOSE 3/8" SS
CLAMP-HOSE 1/2" SS
CLAMP-HOSE 3/4" SS
CLAMP-HOSE 1" SS
CLAMP-HOSE 1-1/2" SS
CLAMP-2" HOSE SS
CLAMP-3" HOSE SS
CLAMP-4" HOSE SS
CLAMP-6" HOSE SS M6799-1 5-7/8" TO 7-3/4"
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Hose and Tubing
Hose Clamps
Stainless Steel T-Bolt Clamps
Stainless Steel T Bolt Clamps
• All stainless steel construction
• Stainless steel nut with silver plating to
prevent seizing.
• 360º sealing surface.
• Ideal for high torque applications.
•
•
•
•
Strong, positive connections where ordinary
hose clamps fail.
Nylon lock feature.
T bolt design.
3 spot welds for extra strength.
Burst pressures to 10,000 psi.
DESCRIPTION
CLAMP-HOSE 1" T-BOLT SS 1.20" X 1.34"
CLAMP-1-1/4"T-BOLT SS 1.62/1.8 TC162
CLAMP-1-1/4"T-BOLT SS 1.81/2.0 TC181
CLAMP-1-1/2"T-BOLT SS 1.93/2.1 TC193
CLAMP-2"T-BOLT SS 2.18/2.50" TC218
CLAMP-2"T-BOLT SS 2.31/2.62" TC231
CLAMP-2"T-BOLT SS 2.50/2.81" TC250
CLAMP-2-1/2" T-BOLT SS 2.87"/3.18"
CLAMP-2-1/2" T-BOLT SS
CLAMP-3"T-BOLT SS 3.12 X 3.49 TC312
CLAMP-3"T-BOLT SS 3.31/3.62" TC331
CLAMP-3"T-BOLT SS 3.43/3.75" TC343
CLAMP-T-BOLT 4.25" TO 4.56" SS
CLAMP-4" T-BOLT SS 4.38/4.76" TC438
CLAMP-4" T-BOLT SS 4.56/4.94" TC456
Fertilizer - Liquid
PART NUMBER
TC120
STBC175
STBC188
STBC200
STBC225
STBC256
STBC275
TC287
STBC312
STBC325
STBC350
STBC375
STBC450
STBC475
STBC500
•
Tubing and Hose Cutters
PTC is a plastic hand held tube cutter for use with polyethylene, polypropylene, nylon and other plastic tubing up to ½" OD.
The economy hose cutter LP-TC400 cuts up to 1-1/2" rubber or textile reinforced hose, not for wire reinforced.
PART NUMBER
PTC
BLADES
LP-TC400
LP-TC0142
DESCRIPTION
CUTTER-TUBING UP TO 1/2" OD
BLADE-REPLACEMENT FOR PTC CUTTER PACK OF FIVE
CUTTER-TUBING/HOSE UP TO 1-1/2" ID RUBBER
BLADE-TC400 TUBE CUTTER
www.feiinc.com
241
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Hose and Tubing
Suction Baskets
T Strainer 304371 is 4" x 7" with a 2" gas thread. The foot valve 504019 is 2" male x 2" female.
PART NUMBER
150SBS
200SBS
300SBS
304371
DESCRIPTION
STRAINER-SUCTION BASKET 1-1/2" FPT
STRAINER-SUCTION BASKET 2" FPT
STRAINER-SUCTION BASKET 3" FPT
STRAINER-2" T GAS THREAD
Banjo Fittings and Line Strainers
Pipe Fittings
Fertilizer - Liquid
Bushings - Reducing
PART NUMBER
BRB038025
BRB050025
BRB050038
BRB075018
BRB075025
BRB075038
BRB075050
BRB100018
BRB100025
BRB100050
BRB100075
BRB125075
BRB125100
BRB112340
BRB112100
BRB112114
BRB200340
BRB200100
BRB200114
BRB200112
BRB300112
BRB300200
BRB400300
242
DESCRIPTION
BUSHING-REDUCER 3/8" MPT X 1/4" FPT POLY
BUSHING-REDUCER 1/2" MPT X 1/4" FPT POLY
BUSHING-REDUCER 1/2" MPT X 3/8" FPT POLY
BUSHING-REDUCER 3/4" MPT X 1/8" FPT POLY
BUSHING-REDUCER 3/4" MPT X 1/4" FPT POLY
BUSHING-REDUCER 3/4" MPT X 3/8" FPT POLY
BUSHING-REDUCER 3/4" MPT X 1/2" FPT POLY
BUSHING-REDUCER 1" MPT X 1/8" FPT POLY
BUSHING-REDUCER 1" MPT X 1/4" FPT POLY
BUSHING-REDUCER 1" MPT X 1/2" FPT POLY
BUSHING-REDUCER 1" MPT X 3/4" FPT POLY
BUSHING-REDUCER 1-1/4" MPT X 3/4" FPT POLY
BUSHING-REDUCER 1-1/4" MPT X 1" FPT POLY
BUSHING-REDUCER 1-1/2" MPT X 3/4" FPT POLY
BUSHING-REDUCER 1-1/2" MPT X 1" FPT POLY
BUSHING-REDUCER 1-1/2" MPT X 1-1/4" FPT POLY
BUSHING-REDUCER 2" MPT X 3/4" FPT POLY
BUSHING-REDUCER 2" MPT X 1" FPT POLY
BUSHING-REDUCER 2" MPT X 1-1/4" FPT POLY
BUSHING-REDUCER 2" MPT X 1-1/2" FPT POLY
BUSHING-REDUCER 3" MPT X 1-1/2" FPT POLY
BUSHING-REDUCER 3" MPT X 2" FPT POLY
BUSHING-REDUCER 4" MPT X 3" FPT POLY
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Pipe Fittings
Caps
PART NUMBER
BCAP025
BCAP038
BCAP050
BCAP075
BCAP100
BCAP125
BCAP112
BCAP200
BCAP300
DESCRIPTION
CAP-PIPE 1/4" POLY
CAP-PIPE 3/8" POLY
CAP-PIPE 1/2" POLY
CAP-PIPE 3/4" POLY
CAP-PIPE 1" POLY
CAP-PIPE 1-1/4" POLY
CAP-PIPE 1-1/2" POLY
CAP-PIPE 2" POLY
CAP-PIPE 3" POLY
PART NUMBER
BCPLG025
BCPLG038
BCPLG050
BCPLG075
BCPLG100
BCPLG125
BCPLG112
BCPLG200
BCPLG300
DESCRIPTION
COUPLING-1/4" POLY PIPE
COUPLING-3/8" POLY PIPE
COUPLING-1/2" POLY PIPE
COUPLING-PIPE 3/4" POLY
COUPLING-1" POLY PIPE
COUPLING-1-1/4" POLY PIPE
COUPLING-1-1/2"POLY PIPE
COUPLING-2" POLY PIPE
COUPLING-3" POLY PIPE
Couplings
Fertilizer - Liquid
Couplings - Reducing
PART NUMBER
BRC100075
BRC112100
BRC112114
BRC200100
BRC200114
BRC200112
BRC300200
DESCRIPTION
COUPLING-REDUCING 1" X 3/4"
COUPLING-REDUCING 1-1/2" X 1"
COUPLING-REDUCING 1-1/2" X 1-1/4"
COUPLING-REDUCING 2" X 1"
COUPLING-REDUCING 2" X 1-1/4"
COUPLING-REDUCING 2" X 1-1/2"
COUPLING-REDUCING 3" X 2"
www.feiinc.com
243
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Pipe Fittings
Crosses
PART NUMBER
CR025
CR038
CR050
CR075
CR100
CR125
CR150
CR200
DESCRIPTION
CROSS-1/4" POLY
CROSS-3/8" POLY
CROSS-1/2" POLY
CROSS-3/4" POLY
CROSS-1" POLY
CROSS-1-1/4" POLY
CROSS-1-1/2" POLY
CROSS-2" POLY
Fertilizer - Liquid
Elbows - 45 Degree Street
PART NUMBER
SL075-45
SL100-45
SL125-45
SL150-45
SL200-45
SL300-45
DESCRIPTION
ELBOW-45 DEG STREET 3/4"
ELBOW-45 DEG STREET 1"
ELBOW-45 DEG STREET 1-1/4"
ELBOW-45 DEG STREET 1-1/2"
ELBOW-45 DEG STREET 2"
ELBOW-45 DEG STREET 3"
Elbows - 90 Degree
PART NUMBER
BTE025
BTE038
BTE050
BTE075
BTE100
BTE125
BTE112
BTE200
BTE300
244
DESCRIPTION
ELBOW-90 DEG 1/4" PIPE
ELBOW-90 DEG 3/8" PIPE
ELBOW-90 DEG 1/2" PIPE
ELBOW-90 DEG 3/4" PIPE
ELBOW-90 DEG 1" PIPE
ELBOW-90 DEG 1-1/4" PIPE
ELBOW-90 DEG 1-1/2" PIPE
ELBOW-90 DEG 2" PIPE
ELBOW-90 DEG 3" PIPE
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Pipe Fittings
Elbows - 90 Degree Street
PART NUMBER
BSE025
BSE038
BSE050
BSE075
BSE100
BSE125
BSE112
BSE200
BSE300
DESCRIPTION
ELBOW-90 DEG STREET 1/4"
ELBOW-90 DEG STREET 3/8"
ELBOW-90 DEG STREET 1/2"
ELBOW-90 DEG STREET 3/4"
ELBOW-90 DEG STREET 1"
ELBOW-90 DEG STREET 1-1/4"
ELBOW-90 DEG STREET 1-1/2"
ELBOW-90 DEG STREET 2"
ELBOW-90 DEG STREET 3"
PART NUMBER
BCN025
BCN038
BCN050
BN050-3
BCN075
BN075-4
BN075-6
BCN100
BN100-4
BN100-6
BCN125
BN125-4
BN125-6
BCN112
BN112-3
BN112-4
BN112-6
BCN200
BN200-4
BN200-6
BCN300
BN300-4
BN300-6
BCN400
DESCRIPTION
NIPPLE-1/4" SHORT
NIPPLE-3/8" SHORT
NIPPLE-1/2" SHORT
NIPPLE-1/2" X 3" POLY
NIPPLE-3/4" SHORT
NIPPLE-3/4" X 4" POLY
NIPPLE-3/4" X 6" POLY
NIPPLE-1" SHORT
NIPPLE-1" X 4" POLY
NIPPLE-1" X 6" POLY
NIPPLE-1-1/4" SHORT
NIPPLE-1-1/4" X 4" POLY
NIPPLE-1-1/4" X 6" POLY
NIPPLE-1-1/2" SHORT
NIPPLE-1-1/2" X 3" POLY
NIPPLE-1-1/2" X 4" POLY
NIPPLE-1-1/2" X 6" POLY
NIPPLE-2" SHORT
NIPPLE-2" X 4" POLY
NIPPLE-2" X 6" POLY
NIPPLE-3" SHORT
NIPPLE-3" X 4" POLY
NIPPLE-3" X 6" POLY
NIPPLE-4" SHORT
Nipples
Fertilizer - Liquid
www.feiinc.com
245
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Pipe Fittings
Nipples - Reducing
PART NUMBER
RN050-038
RN075-050
RN100-050
RN100-075
RN125-075
RN125-100
RN150-100
RN150-125
RN200-125
RN200-150
RN300-200
DESCRIPTION
NIPPLE-1/2" X 3/8" RDCNG
NIPPLE-3/4" X 1/2" RDCNG
NIPPLE-1" X 1/2" RDCNG
NIPPLE-1" X 3/4" RDCNG
NIPPLE-1-1/4" X 3/4" RDCNG
NIPPLE-1-1/4" X 1" RDCNG
NIPPLE-1-1/2" X 1" RDCNG
NIPPLE-1-1/2" X 1-1/4" RDCNG
NIPPLE-2" X 1-1/4" RDCNG
NIPPLE-2" X 1-1/2" RDCNG
NIPPLE-3" X 2" RDCNG
PART NUMBER
BPL025
BPL038
BPL050
BPL075
BPL100
BPL125
BPL112
BPL200
BPL300
DESCRIPTION
PLUG-1/4" PIPE
PLUG-3/8" PIPE
PLUG-1/2" PIPE
PLUG-3/4" PIPE
PLUG-1" PIPE
PLUG-1-1/4" PIPE
PLUG-1-1/2" PIPE
PLUG-2" PIPE
PLUG-3" PIPE
PART NUMBER
BTT025
BTT038
BTT050
BTT075
BTT100
BTT125
BTT112
BTT200
BTT300
DESCRIPTION
TEE-1/4" PIPE
TEE-3/8" PIPE
TEE-1/2" PIPE
TEE-3/4" PIPE
TEE-1" PIPE
TEE-1-1/4" PIPE
TEE-1-1/2" PIPE
TEE-2" PIPE
TEE-3" PIPE
Fertilizer - Liquid
Plugs
Tees
246
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Banjo Poly Barbed Fittings
Straight Barbs
DESCRIPTION
BARB-1/4" MPT X 1/4" HB
BARB-1/4" MPT X 3/8" HB
BARB-1/4" MPT X 1/2" HB
BARB-3/8" MPT X 3/8" HB
BARB-3/8" MPT X 1/4" HB
BARB-3/8" MPT X 1/2" HB
BARB-1/2" MPT X 3/8" HB
BARB-1/2" MPT X 1/2" HB
BARB-1/2" MPT X 3/4" HB
BARB-3/4" MPT X 3/4" HB
BARB-3/4" MPT X 3/8" HB
BARB-3/4" MPT X 1/2" HB
BARB-3/4" MPT X 5/8" HB
BARB-3/4" MPT X 1" HB
BARB-1" MPT X 1" HB
BARB-1" MPT X 3/4" HB
BARB-1" MPT X 1-1/4" HB
BARB-1-1/4" MPT X 1-1/4" HB
BARB-1-1/4" MPT X 3/4" HB
BARB-1-1/4" MPT X 1" HB
BARB-1-1/4" MPT X 1-1/2" HB
BARB-1-1/2" MPT X 1" HB
BARB-1-1/2" MPT X 1-1/4" HB
BARB-1-1/2" MPT X 1-1/2" HB
BARB-1-1/2" MPT X 2" HB
BARB-2" MPT X 1-1/2" HB
BARB-2" MPT X 2" HB
BARB-3" MPT X 3" HB
BARB-4" MPT X 4" HB
BARB-1" FPT X 1" HB
BARB-3/4" FPT X 1" HB
BARB-3/4" FPT X 3/4" HB
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
HB025
HB025/038
HB025-050
HB038
HB038-025
HB038/050
HB050/038
HB050
HB050/075
HB075
HB075/038
HB075/050
HB075/058
HB075/100
HB100
HB100/075
HB100/125
HB125
HB125/075
HB125/100
HB125/150
HB150/100
HB150/125
HB150
HB150/200
HB200/150
HB200
HB300
HB400
HBF100
HBF075-100
HBF075
247
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Banjo Poly Barbed Fittings
Fertilizer - Liquid
Elbows
PART NUMBER
HB025/038-90
HB025/050-90
HB025-90
HB038-90
HB050/038-90
HB050-90
HB050/075-90
HB075/050-90
HB075-90
HB075/100-90
HB100/075-90
HB100-90
HB100/125-90
HB125/100-90
HB125/150-90
HB125-90
HB150/125-90
HB150-90
HB200-90
HB200/150-90
HB300-90
DESCRIPTION
BARB-1/4" MPT X 3/8" HB 90DEG
BARB-1/4" MPT X 1/2" HB 90DEG
BARB-1/4" MPT X 1/4" HB 90DEG
BARB-3/8" MPT X 3/8" HB 90DEG
BARB-1/2" MPT X 3/8" HB 90DEG
BARB-1/2" MPT X 1/2" HB 90DEG
BARB-1/2" MPT X 3/4" HB 90DEG
BARB-3/4" MPT X 1/2" HB 90DEG
BARB-3/4" MPT X 3/4" HB 90DEG
BARB-3/4" MPT X 1" HB 90DEG
BARB-1" MPT X 3/4" HB 90DEG
BARB-1" MPT X 1" HB 90DEG
BARB-1"MPT X 1-1/4" HB 90DEG
BARB-1-1/4" MPT X 1" HB 90DEG
BARB-1-1/4" MPT X 1-1/2" HB 90DEG
BARB-1-1/4" MPT X 1-1/4" HB 90DEG
BARB-1-1/2" MPT X 1-1/4" HB 90DEG
BARB-1-1/2" MPT X 1-1/2" HB 90DEG
BARB-2" MPT X 2" HB 90DEG
BARB-2" MPT X 1-1/2" HB 90DEG
BARB-3" MPT X 3" HB 90DEG
PART NUMBER
HM025
HM038
HM050
HM075
HM100
HM125
HM150
HM200
HM300
HBEL100-90
HBB20012590
DESCRIPTION
MENDER-1/4" X 1/4" HOSE
MENDER-3/8" X 3/8" HOSE
MENDER-1/2" X 1/2" HOSE
MENDER-3/4" X 3/4" HOSE
MENDER-1" X 1" HOSE
MENDER-1-1/4" X 1-1/4" HOSE
MENDER-1-1/2" X 1-1/2" HOSE
MENDER-2" X 2" HOSE
MENDER-3" X 3" HOSE
ELBOW-90DEG 1" HB
BARB-HOSE 2" X 1-1/4" 90 DEG
Menders
248
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Banjo Poly Barbed Fittings
Tees
PART NUMBER
HBT025
HBT038
HBT050
HBT050-038
HBT050-075
HBT075
HBT075-050
HBT075-100
HBT100
HBT100-075
HBT100-100
HBT150-100
HBT150-150
HBT200
HBT300
DESCRIPTION
TEE-HB 1/4" POLY
TEE-HB 3/8" POLY
TEE-HB 1/2" POLY
TEE-HB 1/2" X 1/2" X 3/8" POLY
TEE-HB 1/2" X 1/2" X 3/4" POLY
TEE-HB 3/4" POLY
TEE-HB 3/4" X 3/4" X 1/2" POLY
TEE-HB 3/4" X 3/4" X 1" POLY
TEE-HB 1" POLY
TEE-HB 1" X 1" X 3/4" POLY
TEE-HB 1" X 1" X 1" MPT POLY
TEE-HB 1-1/2" X 1-1/2" X 1" POLY
TEE-HB 1-1/2" X 1-1/2" X 1-1/2" MPT POLY
TEE-HB 2" POLY
TEE-HB 3" POLY
Stainless Steel Barbed Fittings
Fertilizer - Liquid
PART NUMBER
HB025SS
HB025/038SS
HB025/050SS
HB-038SS
HB038-050SS
HB-050SS
HB050/038SS
HB050/075SS
HB075SS
HB075-050SS
HB075/100SS
HB100SS
HB125SS
HB150SS
HB200SS
HB300SS
HB400SS
DESCRIPTION
BARB-1/4" MPT X 1/4" HB SS
BARB-1/4" MPT X 3/8" HB SS
BARB-1/4" MPT X 1/2" HB SS
BARB-3/8" MPT X 3/8" HB SS
BARB-3/8" MPT X 1/2" HB SS
BARB-1/2" MPT X 1/2" HB SS
BARB-1/2" MPT X 3/8" HB SS
BARB-1/2" MPT X 3/4" HB SS
BARB-3/4" MPT X 3/4" HB SS
BARB-3/4" MPT X 1/2" HB SS
BARB-3/4" MPT X 1" HB SS
BARB-1" MPT X 1" HB SS
BARB-1-1/4" X 1-1/4" HB SS
BARB-1-1/2" X 1-1/2" HB SS
BARB-2" X 2" HB SS
BARB-3" X 3" HB SS
BARB-4" MPT X 4" HB SS
www.feiinc.com
249
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Banjo Manifold Flange Fittings
Fertilizer - Liquid
Clamps and Gaskets
PART NUMBER
FC-100
FC-200
FC220
FC220B
FC220TB
FC-300
FC300B
FC300TB
M100G
M100GV
M101G
150G
150GV
M201G
200G
200GV
M221G
300G
300GV
M301G
250
DESCRIPTION
CLAMP-SS MFLD 1" 100 SERIES
CLAMP-SS MFLD 2" 200 SERIES
CLAMP-SS MFLD 2" FP 220 SERIES
CLAMP-2" FP FLG BOLTED
CLAMP-SS MFLD 2" 220 SERIES
CLAMP-SS MFLD 3" 300 SERIES
CLAMP-3" FLG BOLTED
CLAMP-3" FC T-BOLT
GASKET-1" FLG EPDM
GASKET-1"FLG VITON
GASKET-1" EPDM MFLD FLG W/RIB
GASKET-1-1/2" EPDM
GASKET-1-1/2" FKM VITON
GASKET-2" EPDM MFLD FLG W/RIB
GASKET-2" EPDM
GASKET-2" FKM VITON
GASKET-2" EPDM MFLD FLG FP W/RIB
GASKET-3" EPDM
GASKET-3" FKM VITON
GASKET-3" EPDM MFLD FLG W/RIB
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Banjo Manifold Flange Fittings
Adapters
PART NUMBER
M100A
M200A
M220A
M300A
M220D
M303D
DESCRIPTION
ADAPTER-1" ML X 1" FLG
ADAPTER-2" ML X 2" FLG
ADAPTER-2" ML X 2" FP FLG
ADAPTER-3" ML X 3" FP FLG
ADAPTER-2" FML X 2" FP FLG
ADAPTER-3" FML X 3" FPG
Fertilizer - Liquid
Barbs
Straight Barbs
PART NUMBER
M100075BRB
M100BRB
M100125BRB
M200100BRB
M200125BRB
M200150BRB
M200BRB
M220100BRB
M220125BRB
M220150BRB
M220BRB
M220250BRB
M300220BRB
M300BRB
DESCRIPTION
BARB-1" FLG X 3/4" HB
BARB-1" FLG X 1" HB
BARB-1" FLG X 1-1/4" HB
BARB-2" FLG X 1" HB
BARB-2" FLG X 1-1/4" HB
BARB-2" FLG X 1-1/2" HB
BARB-2" FLG X 2" HB
BARB-2" FP FLG X 1" HB
BARB-2" FP FLG X 1-1/4" HB
BARB-2" FP FLG X 1-1/2" HB
BARB-2" FP FLG X 2" HB
BARB-2" FP MFLD X 2-1/2" HB
BARB-3" FLG X 2" HB
BARB-3" FLG X 3" HB
45 Degree Barbs
PART NUMBER
M100BRB45
M200BRB45
M220BRB45
M300BRB45
DESCRIPTION
BARB-45DEG 1" FLG X 1" HB MFLD
BARB-45DEG 2" FLG X 2" HB MFLD
BARB-45DEG 2" FP FLG X 2" HB MFLD
BARB-45DEG 3" FLG X 3" HB MFLD
www.feiinc.com
251
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Banjo Manifold Flange Fittings
Barbs
90 Degree Barbs
PART NUMBER
M100075BRB90
M100BRB90
M100125BRB90
M200100BRB90
M200125BRB90
M200150BRB90
M200BRB90
M220150BRB90
M220BRB90
M300220BRB90
M300BRB90
DESCRIPTION
BARB-90DEG 1" FLG X 3/4" HB
BARB-90DEG 1" FLG X 1" HB
BARB-90DEG 1" FLG X 1-1/4" HB
BARB-90DEG 2" FLG X 1" HB
BARB-90DEG 2" FLG X 1-1/4" HB
BARB-2" FLG X 1-1/2" HB 90DEG
BARB-90DEG 2" FLG X 2" HB
BARB-90DEG 2" FP FLG X 1-1/2" HB
BARB-90DEG 2" FP FLG X 2" HB
BARB-90DEG 3" FLG X 2" HB
BARB-90DEG 3" FLG X 3" HB
PART NUMBER
M220200HBT
M300300HBT
DESCRIPTION
TEE-2" HB X 2" HB X M220
TEE-3" HB X 3" HB X M300
Fertilizer - Liquid
Barbed Tees
Couplings
Straight Couplings
PART NUMBER
M100CPG
M200CPG
M220CPG
M220CPG6
M300CPG
M300CPG7
DESCRIPTION
COUPLING-1" X 1" FLG 2-1/4" LNG
COUPLING-2" X 2" FLG 4-1/2" LNG
COUPLING-2" X 2" FP FLG 2-31/32" LNG
COUPLING-2" X 2"FP FLG 6"LNG
COUPLING-3" X 3" FP FLG 4" LNG
COUPLING-3" X 3"FP FLG 7"LNG
45 Degree Couplings
PART NUMBER
M100CPG45
M200CPG45
M220CPG45
M300CPG45
252
DESCRIPTION
COUPLING-45 DEG 1" X 1" FLG
COUPLING-45 DEG 2" X 2" FLG
COUPLING-45 DEG 2" X 2" FP FLG
COUPLING-45 DEG 3" X 3" FP FLG
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Banjo Manifold Flange Fittings
Couplings
90 Degree Couplings
PART NUMBER
M100CPG90
M200CPG90
M200CPG90SH
M220CPG90
M300CPG90
DESCRIPTION
COUPLING-1" X 1" FLG 90 DEG
COUPLING-2" X 2" FLG 90 DEG
COUPLING-2" X 2" FP FLG 90 DEG
COUPLING-2" X 2" FP FLG 90 DEG
COUPLING-3" X 3" FP FLG 90 DEG
Reducer Couplings
PART NUMBER
M200100CPG
M220100CPG
M220200CPG
M300200CPG
M300220CPG
DESCRIPTION
COUPLING-1" RD FLG X 2" PORT
COUPLING-2" FP FLG X 1" RD FLG
COUPLING-2" FP X 2" RD FLG
COUPLNG-3" X 2" PORT RD FLG
COUPLING-3" X 2" FP RD FLG
Fertilizer - Liquid
45 Degree Y Couplings
NOTE: Gauge not included.
PART NUMBER
M220Y45
M220YG45
M300Y45
M300YG45
DESCRIPTION
COUPLING-2" FP FLG 45 DEG Y
COUPLING-2" FP FLG 45 DEG Y 3/4" GAUGE PORT
COUPLING-3" FP FLG 45 DEG Y
COUPLING-3" FP FLG 45 DEG Y W/ 3/4" GAUGE PORT
PART NUMBER
M100CR
M200CR
M220CR
M300CR
DESCRIPTION
CROSS-1" FLG
CROSS-2" FLG
CROSS-2" FP FLG
CROSS-3" FLG
Crosses
www.feiinc.com
253
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Banjo Manifold Flange Fittings
Threaded Flange Fittings
Male Threaded
PART NUMBER
M100075MPT
M100MPT
M100125MPT
M200125MPT
M200150MPT
M200MPT
M220MPT
M300MPT
DESCRIPTION
FITTING-1" FLG X 3/4" MPT
FITTING-1" MPT X 1" FLG
FITTING-1" FLG X 1-1/4" MPT
FITTING-1-1/4" MPT X 2" FLG
FITTING-1-1/2" MPT X 2" FLG
FITTING-2" MPT X 2" FLG
FITTING-2" FP FLG X 2" MPT
FITTING-3" FLG X 3" MPT
Fertilizer - Liquid
Female Threaded
PART NUMBER
M100050FPT
M100075FPT
M100FPT
M200FPT
M220FPT
M300FPT
DESCRIPTION
FITTING-1" FLG X 1/2" FPT
FITTING-1" FLG X 3/4" FPT
FITTING-1" FPT X 1" FLG
FITTING-2" FPT X 2" FLG
FITTING-2"FP FLG X 2"FPT
FITTING-3"FLG X 3"FPT
PART NUMBER
M200150MPTSS
M220150MPTSS
M200MPTSS
M220MPTSS
M300MPT/SS
DESCRIPTION
FITTING-1-1/2" MPT X 2" FLG SS
FITTING-2" FP MFLD X 1-1/2" MPT SS
FITTING-2" MPT X 2" FLG SS
FITTING-2" FP FLG X 2" MPT SS
FITTING-3"FLG X 3"MPT SS
Stainless Steel
254
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Banjo Manifold Flange Fittings
Miscellaneous Fittings
PART NUMBER
MSW220
M221GSA
M301GSA
UB100
UB202
UB220
DESCRIPTION
SWIVEL-MFLD 2" FP FLG
FITTING-2" MFLD FP FLG X 2" PVC GLUE SOCKET
FITTING-MFLD 3" FP FLG X 3" PVC GLUE SOCKET
U-BOLT-100 SERIES MNTG SS
U-BOLT-200 SERIES MNTG SS
U-BOLT-220 SERIES MNTG SS
Fertilizer - Liquid
Plugs
PART NUMBER
M100PLG
M100PLG025
M100PLG050
M200PLG
M200PLG025
M200PLG050
M200PLG075
M200PLG100
M220PLG
M220PLG038
M220PLG075
M300PLG
M300PLG075
M300PLG100
DESCRIPTION
PLUG-1" FLG SOLID
PLUG-1" FLG X 1/4" FPT SOLID & GAUGE PORT
PLUG-1" FLG X 1/2" FPT SOLID & GAUGE PORT
PLUG-2" FLG SOLID
PLUG-2" FLG X 1/4" FPT
PLUG-2" FLG X 1/2" FPT
PLUG-2" FLG X 3/4" FPT
PLUG-2" FLG X 1" FPT
PLUG-2" FP FLG SOLID
PLUG-2"FP FLG X 3/8"FPT
PLUG-2"FP FLG X 3/4"FPT
PLUG-3" FLG SOLID
PLUG-3"FLG X 3/4"FPT
PLUG-3"FLG X 1"FPT
www.feiinc.com
255
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Banjo Manifold Flange Fittings
Tees
PART NUMBER
M100TEE
M101TEE
M200100TEE
M200TEE
M220200TEE
M220TEE
M300TEE
DESCRIPTION
TEE-1" FLG
TEE-1" FLG LONG
TEE-1"FLG X 2" PORT
TEE-2" PORT FLG
TEE-2" FP FLG X 2" FLG
TEE-2" FP FLG POLY
TEE-3" FLG
Fertilizer - Liquid
Sweeps
PART NUMBER
M100BRBSWP90
M100SWP90
M200SWP90
M220ASWP90
M220BRBSWP90
M220MPTSWP90
M220SWP90
M220200SWP90
M300ASWP90
M300ASWPG90
M300BRBSWP90
M300MPTSWP90
M300MPTSWPG90
M300SWP90
M300SWPG90
256
DESCRIPTION
SWEEP-1" FLG X HOSE SHANK
SWEEP-1" FLG X FLG
SWEEP-2" FLG X FLG
SWEEP-2" FP FLG X ML ADAPTER
SWEEP-2" FP FLG X HOSE SHANK
SWEEP-2" FP FLG X ML NPT
SWEEP-2" FP FLG X FLG
SWEEP-2" FP FLG X 2" FLG
SWEEP-3" FLG X ML ADAPTER
SWEEP-3" FLG X ML ADAPTER W/GAUGE PORT 1/2"
BARB-90DEG SWEEP 3" FLG X 3" HB
SWEEP-3" FLG X ML NPT
SWEEP-3" FLG X ML NPT W/GAUGE PORT 1/2"
SWEEP-3" FLG X FLG
SWEEP-3" FLG X FLG W/GAUGE PORT 1/2"
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Banjo Poly Cam Lever Couplings
Male Adapter x Female Thread
COUPLINGS SHOULD NOT BE DISCONNECTED UNDER PRESSURE OR WITH LIQUID IN THE LINE.
Features:
• Stainless steel rings, arms and pins.
• Interchangeable with all types of cam lever
couplers.
• Precision molding insures a uniform and
accurate fit.
•
•
•
Polypropylene is glass reinforced for strength
and durability.
Finger rings are designed for easy opening of
cam levers.
Standard with EPDM gaskets.
Operating Conditions:
• 3/8" to 2" – 100 psi at 0º F., 125 psi at 70º F., 70 psi at 150º F.
• 2-1/2", 3" and 4" Cap – 50 psi; Couplings 75 psi max.
DESCRIPTION
ADAPTER-3/4" ML X FPT
ADAPTER-1" ML X FPT
ADAPTER-1-1/4" ML X FPT
ADAPTER-1-1/2" ML X FPT
ADAPTER-1-1/2" X 1-1/4" ML
ADAPTER-2" ML X FPT
ADAPTER-3" ML X 3" FPT
ADAPTER-4" ML X FPT
Fertilizer - Liquid
PART NUMBER
075A
100A
125A
150A
150-125A
200A
300A
400A
Female Coupler x Male Thread
PART NUMBER
075B
100B
125B
150-125B
150B
201B
300B
303B
400B
DESCRIPTION
COUPLER-3/4" FML X 3/4" MPT
COUPLER-1" FML X MPT
COUPLER-1-1/4" FML X MPT
COUPLER-1-1/2" FML X 1-1/4" MPT
COUPLER-1-1/2" FML X 1-1/2" MPT
COUPLER-2" FML X 2" MPT LONG SHANKED
COUPLER-3" FML X 3" MPT
COUPLER-3" FML X 3" MPT 3 ARMS
COUPLER-4" FML X MPT
www.feiinc.com
257
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Banjo Poly Cam Lever Couplings
Female Coupler x Hose Barb
PART NUMBER
050C
075C
100C
125C
150-125C
150C
200150C
200C
300C
303C
400C
DESCRIPTION
COUPLER-1/2" FML X BARB
COUPLER-3/4" FML X 3/4" BARB
COUPLER-1" FML X BARB
COUPLER-1-1/4" FML X BARB
COUPLER-1-1/2" FML X 1-1/4" BARB
COUPLER-1-1/2" FML X BARB
COUPLER-2" FML X 1-1/2" BARB
COUPLER-2" FML X BARB
COUPLER-3" FML X BARB
COUPLER-3" FML X 3" BARB 3 ARMS
COUPLER-4" FML X BARB
Female Coupler x Female Thread
Fertilizer - Liquid
PART NUMBER
050D
075D
100D
125D
150-125D
150D
200D
300D
400D
DESCRIPTION
COUPLER-1/2" FML X FPT
COUPLER-3/4" FML X 3/4" FPT
COUPLER-1" FML X FPT
COUPLER-1-1/4" FML X FPT
COUPLER-1-1/2" X 1-1/4" FML
COUPLER-1-1/2" FML X FPT
COUPLER-2" FML X FPT
COUPLER-3" FML X FPT
COUPLER-4" FML X FPT 3 ARMS
Male Adapter x Hose Barb
PART NUMBER
050E
075E
100E
125E
150-125E
150E
200E
300E
400E
258
DESCRIPTION
ADAPTER-1/2" ML X 1/2" HB
ADAPTER-3/4" ML X 3/4" HB
ADAPTER-1" ML X 1" HB
ADAPTER-1" ML X 1-1/4" HB
ADAPTER-1-1/2" ML X 1-1/4" BARB
ADAPTER-1-1/2" ML X BARB
ADAPTER-2" ML X 2" HB
ADAPTER-3" ML X SHANK
ADAPTER-4" ML X BARB
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Banjo Poly Cam Lever Couplings
Male Adapter x Male Thread
PART NUMBER
050F
075F
100F
125F
150-125F
150F
200F
200F-45
300F
400F
DESCRIPTION
ADAPTER-1/2" ML X MPT
ADAPTER-3/4" ML X MPT
ADAPTER-1" ML X MPT
ADAPTER-1-1/4" ML X MPT
ADAPTER-1-1/2" ML X 1-1/4" MPT
ADAPTER-1-1/2" ML X MPT
ADAPTER-2" ML X MPT
ADAPTER-2" ML X MPT 45 DEG
ADAPTER-3" ML X MPT
ADAPTER-4" ML X MPT
PART NUMBER
075PL
100PL
150PL
200PL
300PL
400PL
DESCRIPTION
PLUG-1/2" & 3/4" FML COUPLER
PLUG-1" & 1-1/4" FML COUPLER
PLUG-1-1/2" FML COUPLER
PLUG-2" FML COUPLER
PLUG-3" FML COUPLER
PLUG-4" FML COUPLER
PART NUMBER
075CAP
100CAP
150CAP
200CAP
300CAP
400CAP
DESCRIPTION
CAP-FITS 1/2" & 3/4" ML ADAPTER
CAP-1" & 1-1/4" ML ADAPTER
CAP-1-1/2" ADAPTER ML
CAP-2" ML ADAPTER
CAP-3" ML ADAPTER
CAP-4" ML ADAPTER 3 ARMS
Male Plug
Fertilizer - Liquid
Female Cap
www.feiinc.com
259
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Banjo Poly Cam Lever Couplings
Miscellaneous Adapters
Fertilizer - Liquid
COUPLINGS SHOULD NOT BE DISCONNECTED UNDER PRESSURE OR WITH LIQUID IN THE LINE.
Features:
• Stainless steel rings, arms and pins.
• Interchangeable with all types of cam lever couplers.
• Precision molding insures a uniform and accurate fit.
• Polypropylene is glass reinforced for strength and
durability.
•
•
Operating Conditions:
• 3/8" to 2" – 100 psi at 0º F., 125 psi at 70º F., 70 psi at 150º F.
• 2-1/2", 3" and 4" Cap – 50 psi; Couplings 75 psi max.
PART NUMBER
200FF
300F200F
300FF
303B200A
260
DESCRIPTION
ADAPTER-2" ML X 2" ML
ADAPTER-3" ML X 2" ML
ADAPTER-3" ML X 3" ML
ADAPTER-3" FML X 2" ML 3 ARMS
www.feiinc.com
Finger rings are designed for easy opening of cam
levers.
Standard with EPDM gaskets.
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Banjo Poly Cam Lever Couplings
90 Degree Couplers
COUPLINGS SHOULD NOT BE DISCONNECTED UNDER PRESSURE OR WITH LIQUID IN THE LINE.
PART NUMBER
150A-90
200A-90
200B-90
150C-90
200C-90
150D-90
200D-90
150F-90
200F-90
220FSWP90
DESCRIPTION
COUPLER-1-1/2" ML X FPT 90 DEG
COUPLER-2" ML X FTP 90 DEG
COUPLER-2" FML X MPT 90 DEG
COUPLER-1-1/2" FML X BARB 90 DEG
COUPLER-2" FML X BARB 90 DEG
COUPLER-1-1/2" FML X FPT 90 DEG
COUPLER-2" FML X FPT 90 DEG
COUPLER-1-1/2" ML X MPT 90 DEG
COUPLER-2" ML X MPT 90 DEG
COUPLER-2" ML ADAPTER X 2" ML THREAD 90 DEG SWEEP
www.feiinc.com
261
Fertilizer - Liquid
Features:
• Precision molded in polypropylene, reinforced with fiberglass for strength and durability.
• Stainless steel rings, cam levers and pins resist corrosion.
• Banjo 90º angle couplings and adapters will reduce the number of elbows and other pipe fittings used in plumbing applications.
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Banjo Poly Cam Lever Couplings
Garden Hose Adapters
Fertilizer - Liquid
Garden Hose Fitting Features:
• Quick and simple way to connect and
disconnect your garden hose.
• Easily connects hose to spigot,
sprinkler, nozzle or other hose end
accessories.
Garden Hose Spray Nozzle Features:
• Heavy duty machined aluminum
construction stands up to hard use.
• Comfort grip soft rubber provides a
comfortable gripping texture.
• Resists dents, mars and scratches and
also protects any surface that comes in
contact with nozzle.
•
•
•
Durable, rustproof polypropylene construction.
Never have to use pliers to tighten to prevent leaks.
Standard ¾" opening diameter.
•
Aluminum hose connection provides a tight fit and will
not rust.
Multiple spray pattern adjusts from a powerful jet
stream to a gentle fan spray.
Stainless steel spray cap for precise spray patterns.
•
•
SPRAY PATTERN
PART NUMBER
GHFT075A
GHMT075B
GHFT075D
GHMT075F
GHFT075MPT
GHMT075FPT
GHMT075MPT
GHN075
262
DESCRIPTION
ADAPTER-3/4" X 3/4" GH FT
ADAPTER-3/4" CPLR X 3/4" GH MT
ADAPTER-3/4" CPLR X 3/4" GH FT
ADAPTER-3/4" X 3/4" GH MT
ADAPTER-3/4" MPT X 3/4" GH FT
ADAPTER-3/4" FPT X 3/4" GH MT
ADAPTER-3/4" MPT X 3/4" GH MT
NOZZLE-3/4" SPRAY GARDEN HOSE
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Banjo Poly Cam Lever Couplings
Gaskets
DESCRIPTION
GASKET-1/2" & 3/4" EPDM
GASKET-1" & 1-1/4" EPDM
GASKET-1-1/2" EPDM
GASKET-2" EPDM
GASKET-3" EPDM
GASKET-4" EPDM
GASKET-1/2" & 3/4" EXTRA THICK EPDM
GASKET-1" & 1-1/4" EXTRA THICK EPDM
GASKET-1-1/2" EXTRA THICK EPDM
GASKET-2" EXTRA THICK EPDM
GASKET-3" EXTRA THICK EPDM
GASKET-4" EXTRA THICK EPDM
GASKET-1/2" & 3/4" FKM VITON
GASKET-1" & 1-1/4" FKM VITON
GASKET-1-1/2" FKM VITON
GASKET-2" FKM VITON
GASKET-3" FKM VITON
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
075G
100G
150G
200G
300G
400G
075GXT
100GXT
150GXT
200GXT
300GXT
400GXT
075GV
100GV
150GV
200GV
300GV
263
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Banjo Stainless Steel Cam Lever Couplings
Male Adapter x Female Thread
COUPLINGS SHOULD NOT BE DISCONNECTED UNDER PRESSURE OR WITH LIQUID IN THE LINE.
Features:
• Tough 316 stainless steel to insure
durability.
• Chemical resistant to protect against
corrosion.
• Precision made, investment casting high
quality process to assure uniformity and
proper fit.
• 150 psi maximum operating pressure.
Fertilizer - Liquid
PART NUMBER
075A/SS
100A/SS
200A/SS
300A/SS
400A/SS
•
•
•
Versatile to interchange with all types of cam
lever couplings.
Smooth operation makes connections quick
and easy.
Standard with Buna N gaskets.
DESCRIPTION
ADAPTER-3/4" ML X 3/4" FPT SS
ADAPTER-1" ML X 1" FPT SS
ADAPTER-2" ML X 2" FPT SS
ADAPTER-3" ML X 3" FPT SS
ADAPTER-4" ML X 4" FPT SS
Female Coupler x Male Thread
PART NUMBER
075B/SS
100B/SS
150B/SS
200B/SS
300B/SS
400B/SS
DESCRIPTION
COUPLING-CAM LEVER 3/4" FML COUPLER X 3/4" MPT SS
COUPLING-CAM LEVER 1" FML COUPLER X 1" MPT SS
COUPLING-CAM LEVER 1-1/2" FML COUPLER X 1-1/2" MPT SS
COUPLING-CAM LEVER 2" FML COUPLER X 2" MPT SS
COUPLING-CAM LEVER 3" FML COUPLER X 3" MPT SS
COUPLING-CAM LEVER 4" FML COUPLER X 4" MPT SS
Female Coupler x Hose Barb
PART NUMBER
075C/SS
100C/SS
150C/SS
200C/SS
300C/SS
400C/SS
264
DESCRIPTION
COUPLING-CAM LEVER 3/4" FML COUPLER X 3/4" HOSE SHANK SS
COUPLING-CAM LEVER 1" FML COUPLER X 1" HOSE SHANK SS
COUPLING-CAM LEVER 1-1/2" FML COUPLER X 1-1/2" HOSE SHANK SS
COUPLING-CAM LEVER 2" FML COUPLER X 2" HOSE SHANK SS
COUPLING-CAM LEVER 3" FML COUPLER X 3" HOSE SHANK SS
COUPLING-CAM LEVER 4" FML COUPLER X 4" HOSE SHANK BUNA
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Banjo Stainless Steel Cam Lever Couplings
Female Coupler x Female Thread
PART NUMBER
075D/SS
100D/SS
150D/SS
200D/SS
300D/SS
DESCRIPTION
COUPLING-CAM LEVER 3/4" FML X 3/4" FPT THREAD SS
COUPLING-CAM LEVER 1" FML X 1" FML THREAD SS
COUPLING-CAM LEVER 1-1/2" FML X 1-1/2" FML THREAD SS
COUPLING-CAM LEVER 2" FML COUPLER X 2" FML THREAD SS
COUPLING-CAM LEVER 3" FML COUPLER X 3" FML THREAD SS
Male Adapter x Hose Barb
PART NUMBER
075E/SS
100E/SS
150E/SS
200E/SS
300E/SS
DESCRIPTION
ADAPTER-3/4" ML X 3/4" HB SS
ADAPTER-1" ML X 1" HB SS
ADAPTER-1-1/2" ML X 1-1/2" HOSE SHANK SS
COUPLING-CAM LEVER 2" ML ADAPTER X 2" HOSE SHANK SS
COUPLING-CAM LEVER 3" ML ADAPTER X 3" HOSE SHANK SS
Male Adapter x Male Thread
DESCRIPTION
ADAPTER-3/4" ML X MPT SS
ADAPTER-1" ML X MPT SS
COUPLING-CAM LEVER 1-1/2" ML X 1-1/2" MPT SS
COUPLING-CAM LEVER 2" ML ADAPTER X 2" MPT SS
COUPLING-CAM LEVER 3" ML ADAPTER X 3" MPT SS
ADAPTER-4" ML X MPT SS
PART NUMBER
075PL/SS
200PL/SS
300PL/SS
DESCRIPTION
PLUG-3/4" FOR FML COUPLER SS
PLUG-2" FOR FML COUPLER SS
PLUG-3" FOR FML COUPLER SS
PART NUMBER
075CAP/SS
100CAP/SS
200CAP/SS
300CAP/SS
DESCRIPTION
CAP-FITS 1/2" & 3/4" SS
CAP-1" SS ADAPTER 1" ML
CAP-2" SS ML ADPATER
CAP-3" SS ML ADAPTER
Fertilizer - Liquid
PART NUMBER
075F/SS
100F/SS
150F-SS
200F/SS
300F/SS
400F/SS
Male Plug
Female Cap
www.feiinc.com
265
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Manifold Line Strainers
T Strainers
Manifold T Line Strainer Features:
• EPDM gaskets.
• 316 stainless steel screens.
DESCRIPTION
STRAINER-MFLD T 1" 16MSH
STRAINER-MFLD T 1" 50MSH
STRAINER-MFLD T 1" 80MSH
STRAINER-MFLD T 1" 100MSH
STRAINER-MFLD T 2" 16MSH
STRAINER-MFLD T 2" 30MSH
STRAINER-MFLD T 2" 50MSH
STRAINER-MFLD T 2" 80MSH
Fertilizer - Liquid
PART NUMBER
MLST100-16
MLST100-50
MLST100-80
MLST100-100
MLST150-16
MLST150-30
MLST150-50
MLST150-80
266
•
www.feiinc.com
150 psi maximum.
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Manifold Line Strainers
T Strainers
MLST100 Replacement Parts
Fertilizer - Liquid
PART NUMBER
LST100-B
T3-12777
UV-15163
LST100-G
LST100-GV
LST116
LST130
LST150
LST180
LST1100
T3-13778
DESCRIPTION
STRAINER-T 3/4" OR 1" BOWL POLY
PLUG-1-1/2",2" PRIME
O-RING-1-1-1/4" DRN PLG EPDM
GASKET-3/4" OR 1" POLY T STRAINER EPDM
GASKET-3/4" OR 1" POLY T STRAINER VITON
SCREEN-1" LST 16 MSH
SCREEN-3/4" - 1" 30MSH
SCREEN-3/4" - 1" 50MSH
SCREEN-3/4" - 1" 80MSH
SCREEN-3/4" - 1" 100MSH
O-RING-3" PRIME PLG
www.feiinc.com
267
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Manifold Line Strainers
T Strainers
Fertilizer - Liquid
MLST150 Replacement Parts
PART NUMBER
LST150-B
LSQ200PL
LSQ-200R
LST150-G
LST150-GV
LST1516
LST1530
LST1550
LST1580
LST15100
LST034G
268
DESCRIPTION
STRAINER-T 1-1/4" & 1-1/2"BOWL POLY
PLUG-2" FP MFLD STRAINER
O-RING-2" CLEAN OUT PLG EPDM
GASKET-1-1/4" OR 1-1/2" POLY T STRAINER EPDM
GASKET-1-1/4" OR 1-1/2" POLY T STRAINER VITON
SCREEN-1-1/4" - 1-1/2" 16MSH
SCREEN-1-1/4" - 1-1/2" 30MSH
SCREEN-1-1/4" - 1-1/2" 50MSH
SCREEN-1-1/4" - 1-1/2" 80MSH
SCREEN-1-1/2" 100MSH
O-RING-1-1/4" - 1-1/2" EPDM
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Manifold Line Strainers
Y Strainers
DESCRIPTION
STRAINER-MFLD Y 1" 20MSH
STRAINER-MFLD Y 1" 40MSH
STRAINER-MFLD Y 1" 50MSH
STRAINER-MFLD Y 1" 80MSH
STRAINER-MFLD Y 2" 20MSH
STRAINER-MFLD Y 2" 30MSH
STRAINER-MFLD Y 2" 50MSH
STRAINER-MFLD Y 2" 80MSH
STRAINER-MFLD Y 2" 120MSH
STRAINER-MFLD Y FP 2" 50MSH
STRAINER-MFLD Y FP 2" 80 MSH
STRAINER-MFLD Y FP 2" 100MSH
STRAINER-MFLD LINE 3" 4MSH
STRAINER-MFLD LINE 3" 8MSH
STRAINER-MFLD LINE 3" 20MSH
STRAINER-MFLD LINE 3" 50MSH
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
MLS100-20
MLS100-40
MLS100-50
MLS100-80
MLS200-20
MLS200-30
MLS200-50
MLS200-80
MLS200-120
MLS222-50
MLS222-80
MLS222-100
MLS300-04
MLS300-08
MLS300-20
MLS300-50
269
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Manifold Line Strainers
Y Strainers
Fertilizer - Liquid
MLS100 Replacement Parts
Manifold Y Line Strainer MLS100, MLS200 and MLS222 Features:
• EPDM gaskets.
• 316 stainless steel screens.
•
150 psi maximum.
Manifold Y Line Strainer MLS300 Features:
WARNING: 3" POLYPROPYLENE Y STRAINER TO BE USED ON SUCTION SIDE OR NON PRESSURIZED SIDE IN ALL APPLICATIONS.
• EPDM gaskets.
• 100 psi maximum.
• 304 stainless steel screens.
• Threaded end cap to remove screen.
PART NUMBER
LS-100C
T3-12777
UV-15163
LS-100/G
LS-120
LS-140
LS-150
LS-180
LS125G
270
DESCRIPTION
CAP-END FOR 1" & 1-1/4" Y STRAINER
PLUG-1-1/2",2" PRIME
O-RING-1-1-1/4" DRN PLG EPDM
O-RING-1" - 1-1/4" EPDM
SCREEN-1" - 1-1/4" 20MSH
SCREEN-1" - 1-1/4" 40MSH
SCREEN-1" 50 MSH
SCREEN-1" - 1-1/4" 80MSH
O-RING-1" - 1-1/4" EPDM FOR LS 100 SCREENS
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Manifold Line Strainers
Y Strainers
MLS200 Replacement Parts
Fertilizer - Liquid
PART NUMBER
MLS200B
LS150-C
LSQ200PL
LSQ-200R
LS-150G
LS-150GV
LS-206
LS-212
LS-220
LS-230
LS-250
LS-280
LS-2100
LS2120
LS141G
DESCRIPTION
BODY-2" Y STRAINER
CAP-END FOR 1-1/2" & 2" Y STRAINER
PLUG-2" FP MFLD STRAINER
O-RING-2" CLEAN OUT PLG EPDM
O-RING-1-1/2" - 2"
GASKET-1-1/2" - 2" VITON
SCREEN-1-1/2" & 2" 6MSH SS
SCREEN-1-1/2" & 2" 12MSH SS
SCREEN-1-1/2" & 2" 20MSH SS
SCREEN-1-1/2" & 2" 30MSH SS
SCREEN-1-1/2" & 2" 50MSH SS
SCREEN-1-1/2" & 2" 80MSH SS
SCREEN-2" 100MSH SS
SCREEN-1-1/2" & 2" 120MSH SS
O-RING-1-1/2" - 2" EPDM
www.feiinc.com
271
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Manifold Line Strainers
Y Strainers
Fertilizer - Liquid
MLS222 Replacement Parts
PART NUMBER
MLS222BC
MLS220G1
LSQ200PL
LSQ200-RV
LST208SS
LST230SS
LST250SS
MLS250SS
LST280SS
MLS280SS
LST2100SS
272
DESCRIPTION
STRAINER-MFLD Y FP 2" BODY & CAP
GASKET-2" BODY
PLUG-2" FP MFLD STRAINER
O-RING-FKM VITON FOR CLEAN OUT PLUG
SCREEN-2" 8 MSH T-STRAINER
SCREEN-2" 30MSH T-STRAINER
SCREEN-2" 50MSH T-STRAINER
SCREEN-2" 50MSH SS W/PERFORATED SCREEN
SCREEN-2" 80MSH T-STRAINER
SCREEN-2" 80MSH SS W/PERFORATED SCREEN
SCREEN-2" 100MSH T-STRAINER
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Manifold Line Strainers
Y Strainers
MLS300 Replacement Parts
Fertilizer - Liquid
PART NUMBER
MLS300CAP
LS300EC
MLS300ECG
MLS300ECGV
T3-13777
T3-13778
MLS300G
MLS300GV
LS304
LS-312
LS-320
LS-350
DESCRIPTION
CAP-3"FLG Y STRAINER
CAP-3" END
GASKET-3" END CAP EPDM
GASKET-END CAP 3" VITON
PLUG-3" PRIME
O-RING-3" PRIME PLG
GASKET-3" CAP EPDM
GASKET-CAP 3" VITON
SCREEN-3" 4MSH SS
SCREEN-3" 12MSH SS
SCREEN-3" 20MSH SS
SCREEN-3" 50MSH SS
www.feiinc.com
273
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Polypropylene Mini T Line Strainers
Polypropylene Mini T Line Strainer Features:
• Heavy duty glass reinforced polypropylene.
• Clear or black polypropylene bowl.
• Polypropylene ribbed 316 stainless steel
screens.
PART NUMBER
LSTM050-50
LSTM050-50C
LSTM050-80
LSTM050-100
LSTM050-100C
LSTM075-50
LSTM075-50C
LSTM075-80
LSTM075-100C
Fertilizer - Liquid
274
EPDM gaskets standard.
Clear bowl max 100 psi at 70º F.
Black bowl max 150 psi at 70º F.
DESCRIPTION
STRAINER-MINI T 1/2" 50MSH POLY W/BLACK BOWL
STRAINER-MINI T 1/2" 50MSH POLY W/CLEAR BOWL
STRAINER-MINI T 1/2" 80MSH POLY W/BLACK BOWL
STRAINER-MINI T 1/2" 100MSH POLY W/BLACK BOWL
STRAINER-MINI T 1/2" 100MSH POLY W/CLEAR BOWL
STRAINER-MINI T 3/4" 50MSH POLY W/BLACK BOWL
STRAINER-MINI T 3/4" 50MSH POLY W/CLEAR BOWL
STRAINER-MINI T 3/4" 80MSH POLY W/BLACK BOWL
STRAINER-MINI T 3/4" 100MSH POLY W/CLEAR BOWL
Mini T Replacement Parts
PART NUMBER
LSTM050-G
LST050B
LST050B/C
LST550
LST5100
•
•
•
DESCRIPTION
GASKET-1/2" - 3/4" EPDM MINI T
BOWL-MINI STRAINER 1/2"& 3/4"
BOWL-1/2" - 3/4" CLEAR
SCREEN-1/2" - 3/4" 50MSH T-STRAINER
SCREEN-1/2" - 3/4" 100MSH T-STRAINER
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Poly T Line Strainers
Polypropylene T Line Strainer Features:
• Heavy duty glass reinforced polypropylene.
• Clean-out plug.
• 316 stainless steel reinforced screens.
EPDM gaskets standard.
FKM (viton type) available.
150 psi at 70º F.
DESCRIPTION
STRAINER-T 3/4" 16MSH POLY W/SS SCREEN
STRAINER-T 3/4" 30MSH POLY W/SS SCREEN
STRAINER-T 3/4" 50MSH POLY W/SS SCREEN
STRAINER-T 3/4" 80MSH POLY W/SS SCREEN
STRAINER-T 3/4" 100MSH POLY W/SS SCREEN
STRAINER-T 1" 30MSH POLY W/SS SCREEN
STRAINER-T 1" 50MSH POLY W/SS SCREEN
STRAINER-T 1" 80MSH POLY W/SS SCREEN
STRAINER-T 1" 100MSH POLY W/SS SCREEN
STRAINER-T 1-1/4" 30MSH POLY W/SS SCREEN
STRAINER-T 1-1/4" 50MSH POLY W/SS SCREEN
STRAINER-T 1-1/4" 80MSH POLY W/SS SCREEN
STRAINER-T 1-1/4" 100MSH POLY W/SS SCREEN
STRAINER-T 1-1/2" 30MSH POLY W/SS SCREEN
STRAINER-T 1-1/2" 50MSH POLY W/SS SCREEN
STRAINER-T 1-1/2" 80MSH POLY W/SS SCREEN
STRAINER-T 1-1/2" 100MSH POLY W/SS SCREEN
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
LST075-16
LST075-30
LST075-50
LST075-80
LST075-100
LST100-30
LST100-50
LST100-80
LST100-100
LST125-30
LST125-50
LST125-80
LST125-100
LST150-30
LST150-50
LST150-80
LST150-100
•
•
•
275
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Poly T Line Strainers
Fertilizer - Liquid
LST075 and LST100 Replacement Parts
PART NUMBER
LST100-B
LST100-G
LST100-GV
T3-12777
UV-15163
LST116
LST130
LST150
LST180
LST1100
T3-13778
LST100-H
276
DESCRIPTION
STRAINER-T 3/4" OR 1" BOWL POLY
GASKET-3/4" OR 1" POLY T STRAINER EPDM
GASKET-3/4" OR 1" POLY T STRAINER VITON
PLUG-1-1/2",2" PRIME
O-RING-1-1-1/4" DRN PLG EPDM
SCREEN-1" LST 16 MSH
SCREEN-3/4" - 1" 30MSH
SCREEN-3/4" - 1" 50MSH
SCREEN-3/4" - 1" 80MSH
SCREEN-3/4" - 1" 100MSH
O-RING-3" PRIME PLG
STRAINER-T 1" HEAD POLY
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Poly T Line Strainers
LST125 and LST150 Replacement Parts
Fertilizer - Liquid
PART NUMBER
LST150-B
LST150-G
LST150-GV
LSQ200PL
LSQ200-RV
LST125-H
LST150-H
LST150-HB
LST1516
LST1530
LST1550
LST1580
LST15100
LST034G
DESCRIPTION
STRAINER-T 1-1/4" & 1-1/2"BOWL POLY
GASKET-1-1/4" OR 1-1/2" POLY T STRAINER EPDM
GASKET-1-1/4" OR 1-1/2" POLY T STRAINER VITON
PLUG-2" FP MFLD STRAINER
O-RING-FKM VITON FOR CLEAN OUT PLUG
HEAD-T STRAINER 1-1/4" POLY
HEAD-T STRAINER 1-1/2" POLY
STRAINER-T 1-1/2" POLY HEAD BOWL
SCREEN-1-1/4" - 1-1/2" 16MSH
SCREEN-1-1/4" - 1-1/2" 30MSH
SCREEN-1-1/4" - 1-1/2" 50MSH
SCREEN-1-1/4" - 1-1/2" 80MSH
SCREEN-1-1/2" 100MSH
O-RING-1-1/4" - 1-1/2" EPDM
www.feiinc.com
277
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Fertilizer - Liquid
Poly Y Line Strainers
1/2" – 1-1/4" Polypropylene Y Strainer Features:
• Precision molded construction.
• Corrosion resistant.
• Lightweight.
• Fiberglass reinforced.
• Easy grip end cap.
• Poly ribbed 304 stainless steel screen.
•
•
•
•
•
EPDM gaskets. FKM (viton type) gaskets available.
Heavy duty end cap threads.
150 psi maximum.
Clean-out plug.
Female NPT x female NPT.
1-1/2" - 2" Polypropylene Y Strainer Features:
• Precision molded construction.
• Corrosion resistant.
• Lightweight.
• Fiberglass reinforced.
• Easy grip end cap.
• Poly ribbed 316 stainless steel screen.
•
•
•
•
•
EPDM gaskets. FKM (viton type) gaskets available.
Heavy duty end cap threads.
150 psi maximum.
Clean-out plug.
Female NPT x Female NPT.
3" Polypropylene Y Strainer Features:
WARNING: 3" POLYPROPYLENE Y STRAINER TO BE USED ON SUCTION SIDE OR NON PRESSURIZED SIDE IN ALL APPLICATIONS.
• Lightweight.
• Reinforced 304 stainless steel screen.
• High volume.
• 3" female NPT threads.
• Constructed of glass reinforced polypropylene.
• 75 psi maximum.
• ½" drain plug in bottom of cap.
PART NUMBER
LS-050-20
LS-050-80
LS-075-20
LS-075-40
LS-075-80
LS-100-40
LS-100-80
LS-125-20
LS-125-40
LS-125-80
LS-150-06
LS-150-20
LS-150-30
LS-150-50
LS-150-80
LS-200-06
LS-200-12
278
DESCRIPTION
STRAINER-Y 1/2" 20MSH POLY W/SS SCREEN
STRAINER-Y 1/2" 80MSH POLY W/SS SCREEN
STRAINER-Y 3/4" 20MSH POLY W/SS SCREEN
STRAINER-Y 3/4" 40MSH POLY W/SS SCREEN
STRAINER-Y 3/4" 80MSH POLY W/SS SCREEN
STRAINER-Y 1" 40MSH POLY W/SS SCREEN
STRAINER-Y 1" 80MSH POLY W/SS SCREEN
STRAINER-Y 1-1/4" 20MSH POLY W/SS SCREEN
STRAINER-Y 1-1/4" 40MSH POLY W/SS SCREEN
STRAINER-Y 1-1/4" 80MSH POLY W/SS SCREEN
STRAINER-Y 1-1/2" 6MSH POLY W/POLY RIBBED SS SCREEN
STRAINER-Y 1-1/2" 20MSH POLY W/POLY RIBBED SS SCREEN
STRAINER-Y 1-1/2" 30MSH POLY W/POLY RIBBED SS SCREEN
STRAINER-Y 1-1/2" 50MSH POLY W/POLY RIBBED SS SCREEN
STRAINER-Y 1-1/2" 80MSH POLY W/POLY RIBBED SS SCREEN
STRAINER-Y 2" 6MSH POLY W/POLY RIBBED SS SCREEN
STRAINER-Y 2" 12MSH POLY W/POLY RIBBED SS SCREEN
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Poly Y Line Strainers
PART NUMBER
LS-200-20
LS-200-30
LS-200-50
LS-200-80
LS-200-100
LS-200-120
LSM300-04
LSM300-12
LS-300-20
LS-300-50
DESCRIPTION
STRAINER-Y 2" 20MSH POLY W/POLY RIBBED SS SCREEN
STRAINER-Y 2" 30MSH POLY W/POLY RIBBED SS SCREEN
STRAINER-Y 2" 50MSH POLY W/POLY RIBBED SS SCREEN
STRAINER-Y 2" 80MSH POLY W/POLY RIBBED SS SCREEN
STRAINER-Y 2" 100MSH POLY W/POLY RIBBED SS SCREEN
STRAINER-Y 2" 120MSH POLY W/POLY RIBBED SS SCREEN
STRAINER-Y 3" 4MSH POLY MLS THREADED
STRAINER-Y 3" 12MSH POLY MLS THREADED
STRAINER-Y 3" 20MSH POLY W/POLY RIBBED SS SCREEN
STRAINER-Y 3" 50MSH POLY W/POLY RIBBED SS SCREEN
LS050 and LS075 Replacement Parts
Fertilizer - Liquid
PART NUMBER
LS-075-G
LS-720
LS-740
LS-780
DESCRIPTION
GASKET-1/2" TO 3/4" STRAINERS
SCREEN-1/2" - 3/4" 20MSH
SCREEN-1/2" - 3/4" 40MSH
SCREEN-1/2" - 3/4" 80MSH
www.feiinc.com
279
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Poly Y Line Strainers
Fertilizer - Liquid
LS100 and LS125 Replacement Parts
PART NUMBER
LS-100C
LS-100/G
LS100-GV
T3-12777
UV-15163
LS-120
LS-140
LS-150
LS-180
LS125G
280
DESCRIPTION
CAP-END FOR 1" & 1-1/4" Y STRAINER
O-RING-1" - 1-1/4" EPDM
GASKET-STRAINER 1" LINE FKM
PLUG-1-1/2",2" PRIME
O-RING-1-1-1/4" DRN PLG EPDM
SCREEN-1" - 1-1/4" 20MSH
SCREEN-1" - 1-1/4" 40MSH
SCREEN-1" 50 MSH
SCREEN-1" - 1-1/4" 80MSH
O-RING-1" - 1-1/4" EPDM FOR LS 100 SCREENS
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Poly Y Line Strainers
LS150 and LS200 Replacement Parts
Fertilizer - Liquid
PART NUMBER
LS150-C
LS150B/C
LS-150G
LS-150GV
LSQ200PL
LSQ200-RV
LS-200-B
LS-200-B/C
LS-206
LS208304SS
LS-212
LS-220
LS-230
LS-250
LS-280
LS-2100
LS2120
LS2150
LS141G
DESCRIPTION
CAP-END FOR 1-1/2" & 2" Y STRAINER
YBODY-ASSY 1-1/2" CAP/GASKET
O-RING-1-1/2" - 2"
GASKET-1-1/2" - 2" VITON
PLUG-2" FP MFLD STRAINER
O-RING-FKM VITON FOR CLEAN OUT PLUG
BODY-STRAINER 2" Y
BODY-2" Y W/CAP
SCREEN-1-1/2" & 2" 6MSH SS
SCREEN-8 MESH LINE STRAINER SS
SCREEN-1-1/2" & 2" 12MSH SS
SCREEN-1-1/2" & 2" 20MSH SS
SCREEN-1-1/2" & 2" 30MSH SS
SCREEN-1-1/2" & 2" 50MSH SS
SCREEN-1-1/2" & 2" 80MSH SS
SCREEN-2" 100MSH SS
SCREEN-1-1/2" & 2" 120MSH SS
SCREEN-2" 150 MESH WHITE RIBS
O-RING-1-1/2" - 2" EPDM
www.feiinc.com
281
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Poly Y Line Strainers
Fertilizer - Liquid
LSM300 Replacement Parts
PART NUMBER
MLS300CAP
LS300EC
MLS300ECG
MLS300ECGV
MLS300G
MLS300GV
T3-13777
T3-13778
LS304
LS-308
LS-312
LS-320
LS-350
282
DESCRIPTION
CAP-3"FLG Y STRAINER
CAP-3" END
GASKET-3" END CAP EPDM
GASKET-END CAP 3" VITON
GASKET-3" CAP EPDM
GASKET-CAP 3" VITON
PLUG-3" PRIME
O-RING-3" PRIME PLG
SCREEN-3" 4MSH SS
SCREEN-3" 8MSH SS
SCREEN-3" 12MSH SS
SCREEN-3" 20MSH SS
SCREEN-3" 50MSH SS
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Fittings and Line Strainers
Poly Micro Clean Out Valves
•
•
Fertilizer - Liquid
Polypropylene Micro Valve Features:
• 90º rotating handle.
• Precision molded polypropylene is reinforced with
fiberglass for additional strength.
Standard FKM (viton type) seats and O-Rings.
300 psi maximum operating pressure.
The 226 two way ball valves feature black PVC and are for chemical resistance applications, NSF Standard 42 Certified.
PART NUMBER
LV025MTV
LV025V
LV038050MTV
LV038MTV
LV038V
LV050100MTV
LV050MTV
LV050V
LVHB025V
LVHB038050MTV
LVHB038V
LVHB050V
LVHB075100MTV
LVHB075MTV
DESCRIPTION
VALVE-MICRO 1/4" FPT X MNPT
VALVE-MICRO 1/4" FPT FKM
VALVE-MICRO 3/8" FNPT X 1/2" MNPT
VALVE-MICRO 3/8" FPT X MNPT
VALVE-MICRO 3/8" FPT FKM
VALVE-MICRO 1/2" FPT X 1" MPT
VALVE-MICRO 1/2" FPT X MNPT
VALVE-MICRO 1/2" FPT FKM
VALVE-MICRO 1/3" HB FKM
VALVE-MICRO 3/8" HB X 1/2" MPT
VALVE-MICRO 3/8" HB FKM
VALVE-MICRO 1/2" HB FKM
VALVE-MICRO 3/4" HB X 1" MPT
VALVE-MICRO 3/4" HB X 3/4" MPT
www.feiinc.com
283
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Polyethylene Tubing and Push-To-Connect Fittings
Polyethylene Push-In Tubing
Mur-lok linear low-density polyethylene (LLDPE) tubing is constructed of FDA approved materials and has a wide range of chemical
compatibility. This LLDPE tubing has outstanding stress crack resistance and has exceeded 1000 continuous hours of ASTM-D-1693
testing.
Fertilizer - Liquid
INSTALLATION - Reusable Tubing and Fittings:
1. When cutting the tubing make sure the ends are cut squarely. The outer surface of the tube should be clean, smooth and free of
scratches.
2. Make sure tubing is fully inserted (even though it may feel blocked) all the way to tube stop.
3. To insure the tube and fitting are fully connected, pull on the tubing to verify that the tubing and fitting are locked.
4. Stainless steel teeth on collet prevent tube from separating from the O-Ring and ensures a leak free seal.
Separating Reusable Tubing and Fittings:
1. To remove the tube from the fitting, push the collet in and hold it, then pull the tubing out.
PART NUMBER
L0405006
L0405007
L0502506
L0605006
L0605007
L0802506
L0802507
PTC
BLADES
DESCRIPTION
TUBING-1/4" OD POLY PER FT BLACK
TUBING-1/4" OD POLY PER FT NATURAL
TUBING-5/16" OD POLY PER FT BLACK
TUBING-3/8" OD POLY PER FT BLACK
TUBING-3/8" OD POLY PER FT NATURAL
TUBING-1/2" OD POLY PER FT BLACK
TUBING-1/2" OD POLY PER FT NATURAL
CUTTER-TUBING UP TO 1/2" OD
BLADE-REPLACEMENT FOR PTC CUTTER PACK OF FIVE
Push-To-Connect Fittings
Male MPT Connectors
PART NUMBER
O0420216
O0420416
O0420616
O0620216
O0620216B
O0620416
O0620616
O0820816
284
DESCRIPTION
PUSH IN-ML CONNECTOR 1/4" OD X 1/8" MPT
PUSH IN-ML CONNECTOR 1/4" OD X 1/4" MPT
PUSH IN-ML CONNECTOR 1/4" OD X 3/8" MPT
PUSH IN-ML CONNECTOR 3/8" OD X 1/8" MPT
PUSH IN-ML CONNECTOR 1/8" OD X 3/8" MPT BLACK
PUSH IN-ML CONNECTOR 3/8" OD X 1/4" MPT
PUSH IN-ML CONNECTOR 3/8" OD X 3/8" MPT
PUSH IN-ML CONNECTOR 1/2" OD X 1/2" MPT
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Polyethylene Tubing and Push-To-Connect Fittings
Push-To-Connect Fittings
Male MPT 90 Degree Elbows
PART NUMBER
P0420216
P0420416
P0620416
P0620616
44103233
DESCRIPTION
PUSH IN-ML ELBOW 1/4" OD X 1/8" MNPT
PUSH IN-ML ELBOW 1/4" OD X 1/4" MNPT
PUSH IN-ML ELBOW 3/8" OD X 1/4" MNPT
PUSH IN-ML ELBOW 3/8" OD X 3/8" MNPT
PUSH IN-ML ELBOW 1/2" OD X 1/2" MNPT
PART NUMBER
Q0420426
Q0620426
Q0620626
Q0820826
DESCRIPTION
PUSH IN-ELBOW UNION 1/4" OD X 1/4" OD
PUSH IN-ELBOW UNION 3/8" OD X 1/4" OD
PUSH IN-ELBOW UNION 3/8" OD X 3/8" OD
PUSH IN-ELBOW UNION 1/2" OD X 1/2" OD
Union Elbows
Union Connectors
DESCRIPTION
PUSH IN-UNION CONNECTOR 1/4" OD X 1/4" OD
PUSH IN-UNION CONNECTOR 5/16" OD X 5/16" OD
PUSH IN-UNION CONNECTOR 3/8" OD X 1/4" OD
PUSH IN-UNION CONNECTOR 3/8" OD X 3/8" OD
PUSH IN-UNION CONNECTOR 1/2" OD X 1/2" OD
PUSH IN-UNION CONNECTOR 5/16" OD X 3/8" OD
PUSH IN-UNION CONNECTOR 1/2" OD X 3/8" OD
PART NUMBER
S0420566
S0520666
S0460216
S0460416
S0460446
S0460448
S0660416
S0660616
S0660646
S0660846
S0860816
PI251208S
PI291208S
DESCRIPTION
PUSH IN-ADAPTER 1/4" OD X 5/16" STEM OD
PUSH IN-ADAPTER 5/16"OD X 3/8" STEM OD
PUSH IN-ADAPTER 1/4" STEM OD X 1/8" MPT
PUSH IN-ADAPTER 1/4" STEM OD X 1/4" MPT
PUSH IN-ADAPTER 1/4" STEM OD X 1/4" HB
PUSH IN-ADAPTER ELBOW 1/4" STEM OD X 1/4" HB
PUSH IN-ADAPTER 3/8" STEM OD X 1/4" MPT
PUSH IN-ADAPTER 3/8" STEM OD X 3/8" MPT
PUSH IN-ADAPTER 3/8" STEM OD X 3/8" HB
PUSH IN-ADAPTER 3/8" STEM OD X 1/2" HB
PUSH IN-ADAPTER 1/2" STEM OD X 1/2" MPT
PUSH IN-ADAPTER 3/8" STEM OD X 1/4" HB
PUSH IN-ADAPTER ELBOW 3/8" STEM X 1/4" HB
PART NUMBER
V0420426
V0620426
V0620626
V0820826
DESCRIPTION
PUSH IN-TEE UNION 1/4" RUN OD X 1/4" STEM OD
PUSH IN-TEE UNION 3/8" RUN OD X 1/4" STEM OD
PUSH IN-TEE UNION 3/8" RUN OD X 3/8" STEM OD
PUSH IN-TEE UNION 1/2" RUN OD X 1/2" STEM OD
Fertilizer - Liquid
PART NUMBER
R0420426
R0520526
R0620426
R0620626
R0820826
R0620526
PI201612S
Stem Adapters
Union Tees
www.feiinc.com
285
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Polyethylene Tubing and Push-To-Connect Fittings
Push-To-Connect Fittings
Two-Way Dividers
PART NUMBER
V0420006
V0620006
44103281
DESCRIPTION
PUSH IN-2WAY DIVIDER 1/4" TUBE IN X 1/4" TUBE OUT
PUSH IN-2WAY DIVIDER 3/8" TUBE IN X 3/8" TUBE OUT
PUSH IN-2WAY DIVIDER 1/2" TUBE IN X 1/2" TUBE OUT
Female FPT Connectors
PART NUMBER
U0420206
U0420406
U0620406
DESCRIPTION
PUSH IN-FML ADAPTER 1/4" OD X 1/8" FNPT
PUSH IN-FML ADAPTER 1/4" OD X 1/4" FPT
PUSH IN-FML ADAPTER 3/8" OD X 1/4" FNPT
PART NUMBER
W0420006
W0620006
W0820006
PI0808S
X0520006
DESCRIPTION
PUSH IN-TUBE END STOP 1/4" OD
PUSH IN-TUBE END STOP 3/8" OD
PUSH IN-TUBE END STOP 1/2" OD
PLUG-JOHN GUEST SUPER SPEEDFIT 1/4" GREY
PLUG-MURLOK 5/16" STEM
Fertilizer - Liquid
Tube End Stops
Valves
The push in plastic Control Valve features an in-line needle valve. It is highly durable and resistant to pressure, allows control of flow in
both directions. The collar on the adjustable valve stem locks the flow control. The Hand Valve union connector features an in-line shut off
valve that allows for partial flow control. The in-line Check Valve prevents reverse flow.
PART NUMBER
44103286
44103287
G0420425
G0620625
G0820825
J0422426
J0422426-03
J0622626
J0822826
286
DESCRIPTION
PUSH IN-CONTROL VALVE 1/4" OD X 1/4" OD
PUSH IN-CONTROL VALVE 3/8" OD X 3/8" OD
VALVE-HAND 1/4" UNION CONNECTOR PUSH-IN
VALVE-HAND 3/8" UNION CONNECTOR PUSH-IN
VALVE-HAND 1/2" UNION CONNECTOR PUSH-IN
VALVE-CHECK 1/4" IN-LINE PUSH-IN 0.3 PSI
VALVE-CHECK 1/4" 2 PSI
VALVE-CHECK 3/8" IN-LINE PUSH-IN 0.3 PSI
VALVE-CHECK 1/2" IN-LINE PUSH-IN 0.3 PSI
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Valves
Ball
Chrome
Chrome Ball Valves feature chromed brass body, ball and stem with a 200 psi rating.
DESCRIPTION
VALVE-BALL 1/8" FPT X 1/8" FPT CHROME BUTTERFLY HANDLE
VALVE-BALL 1/8" FPT X 1/8" FPT CHROME LEVER HANDLE
VALVE-BALL 1/4" FPT X 1/4" FPT CHROME BUTTERFLY HANDLE
VALVE-BALL 1/4" FPT X 1/4" FPT CHROME LEVER HANDLE
VALVE-BALL 1/4" FPT X 1/4" MPT CHROME BUTTERFLY HANDLE
VALVE-BALL 1/4" FPT X 1/4" MPT CHROME LEVER HANDLE
VALVE-BALL 3/8"FPT X 3/8"FPT CHROME BUTTERFLY HANDLE
VALVE-BALL 3/8"FPT X 3/8"FPT CHROME LEVER HANDLE
VALVE-BALL 3/8"FPT X 3/8"MPT CHROME BUTTERFLY HANDLE
VALVE-BALL 3/8"FPT X 3/8"MPT CHROME LEVER HANDLE
VALVE-BALL 1/2" FPT X 1/2" FPT CHROME BUTTERFLY HANDLE
VALVE-BALL 1/2" FPT X 1/2" FPT CHROME LEVER HANDLE
VALVE-BALL 1/2" FPT X 1/2" MPT CHROME BUTTERFLY HANDLE
VALVE-BALL 1/2" FPT X 1/2" MPT CHROME LEVER HANDLE
Fertilizer - Liquid
PART NUMBER
90FFB18
90FFL18
90FFB14
90FFL14
90FMB14
90FML14
90FFB38
90FFL38
90FMB38
90FML38
90FFB12
90FFL12
90FMB12
90FML12
Stainless Steel
Stainless Steel Ball Valves feature investment cast body and cap with Teflon seals and seats for smooth
operation and proper seating characteristics. Blow-out proof stem and ball are made of 316 stainless steel
and they have adjustable stem packing, locking device on handle and 1000 psi rating.
PART NUMBER
78-14
78-38
78-12
78-34
78-100
78-114
78-112
78-200
78-300
DESCRIPTION
VALVE-BALL SS 1/4" LOCKING FP 2 PIECE
VALVE-BALL SS 3/8" LOCKING FP 2 PIECE
VALVE-BALL SS 1/2" LOCKING FP 2 PIECE
VALVE-BALL SS 3/4" LOCKING FP 2 PIECE
VALVE-BALL SS 1" LOCKING FP 2 PIECE
VALVE-BALL SS 1-1/4" LOCKING FP 2 PIECE
VALVE-BALL SS 1-1/2" LOCKING FP 2 PIECE
VALVE-BALL SS 2" LOCKING FP 2 PIECE
VALVE-BALL SS 3" LOCKING FP 2 PIECE
www.feiinc.com
287
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Fertilizer - Liquid
Banjo Poly
Polypropylene Ball Valve Features:
• Standard with stainless steel bolts.
• Precision molded in polypropylene that is reinforced
with fiberglass for additional strength.
• Self-aligning ball moves freely against the Teflon seats
for smooth operation.
• Ball is diamond turned after molding to make it
spherically perfect, which provides the right contact
between ball and seats.
•
•
•
•
The valve opens and closes with very little pressure on
the handle.
Viton O-ring stem seal.
Teflon self-lubricating stem bushings and seats cannot
stick or bind.
Maximum operating pressure 100 psi.
2" Full Port Valves are polypropylene bolted ball valves with a maximum operating pressure of 150 psi at 70º F. and 75 psi at 150º F.
“Stubby” Ball Valve Features:
• Stainless steel bolts.
• Glass reinforced polypropylene.
• Multiple design options.
• Unique patented compact design.
288
•
•
•
www.feiinc.com
Lightweight.
Maximum operating pressure 100 psi at 70º F. and 75
psi at 150º F.
All PTFE seals.
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Valves
Ball
Banjo Poly
DESCRIPTION
VALVE-BALL 1/2" FP
VALVE-BALL 3/4" FP
VALVE-BALL 1" STD PORT
VALVE-BALL 1" FP
VALVE-BALL 1-1/4" STD PORT
VALVE-BALL 1-1/4" FP
VALVE-BALL 1-1/2" FP
VALVE-BALL 2" STD PORT
VALVE-BALL 2" FP
VALVE-BALL 3" STD PORT
VALVE-BALL 3" FP
VALVE-BALL 4" STD PORT
VALVE-BALL 2" FP 4 BOLT
VALVE-BALL 2" ML ADAPTER X 2" MNPT FP
VALVE-2" MPT X 2" ML ADAPTER POLY 4 BOLT
VALVE-BALL 2" ML ADAPTER X 2" FNPT STUBBY
VALVE-BALL 2" MNPT X 2" FNPT STUBBY STD PORT
VALVE-BALL 2" ML ADAPTER X 2" MNPT STD PORT
VALVE-BALL 2" ML ADAPTER X 2" HB STUBBY
VALVE-BALL FP 2" MNPT X 2" FNP STUBBY
VALVE-BALL FP 2" ML ADAPTER X 2" FNPT STUBBY
VALVE-BALL FP 2" FNPT X 2" FNP STUBBY
VALVE-BALL FP 2" ML ADAPTER X 2" MNPT STUBBY
VALVE-BALL 2" FP ML ADAPTER X 2" MPT W/SS BALL, STEM & HNDLE
VALVE-3" FNPT X 3" MNPT
VALVE-3" FNPT X 3" ML ADAPTER
VALVE-BALL 3" ML ADAPTER X 3" MPT STUBBY
VALVE-BALL 3" ML ADAPTER X 3" MPT FP STUBBY
VALVE-BALL 3" MPT X 3" ML W/SS BALL, STEM & HANDLE
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
V050
V075
V100
V100FP
V125
V125FP
V150
V200
V200FP
V300
V300FP
V400
V204FP
VFMT-200FP
VFMT204FP
VSF-200
VSMT-200
VSFMT-200
VSFHB-200
VSMT204FP
VSF204FP
VS204FP
VSFMT204FP
VSFMT204HSFP
VSMT-300
VSF300
VSFMT-300
VSFMT300FP
VSFMT300HSFP
289
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Valves
Ball
Banjo Poly
Fertilizer - Liquid
3-Way Valves
Polypropylene 3-Way Valve Features:
• Stainless steel bolts.
• Precision molded polypropylene.
• Reinforced with fiberglass for additional strength.
• Self-aligning ball moves freely against the PTFE seats
for smooth operation.
• Ball is diamond turned after molding to make it
spherically perfect, which provides precise contact
between ball and seats.
PART NUMBER
V-075-BL
V-075-SL
V-100-BL
V-100-SL
VT100SL
V-125-BL
V-125-SL
V-150-BL
V-150-SL
V-200-BL
V-200-SL
VT200SL
290
•
•
•
•
•
PTFE self-lubricating stem bushings and seats.
FKM (viton type) body seals.
Maximum operating pressure 100 psi.
Bottom load offers directional flow, right or left, valve
can be turned off to stop flow.
Side load offers directional flow, right or left, valve
cannot be turned off.
DESCRIPTION
VALVE-BALL 3/4" 3-WAY BOTTOM LOAD POLY
VALVE-BALL 3/4" 3-WAY SIDE LOAD POLY
VALVE-BALL 1" 3-WAY BOTTOM LOAD POLY
VALVE-BALL 1" 3-WAY SIDE LOAD POLY
VALVE-3 WAY 1" FPT 1" PORT T-HANDLE
VALVE-BALL 1-1/4" 3-WAY BOTTOM LOAD POLY
VALVE-BALL 1-1/4" 3-WAY SIDE LOAD POLY
VALVE-BALL 1-1/2" 3-WAY BOTTOM LOAD POLY
VALVE-BALL 1-1/2" 3-WAY SIDE LOAD POLY
VALVE-BALL 2" 3-WAY BOTTOM LOAD POLY
VALVE-BALL 2" 3-WAY SIDE LOAD POLY
VALVE-2" 3 WAY SIDE LOAD W/ "T" HANDLE
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Valves
Ball
Banjo Poly
Nozzle Valves
Polypropylene Nozzle Valve Features:
• Lightweight hose end valve for convenient transfer of liquids into drums, tanks, etc.
• Angled end flange with 8" long polypropylene fill spout.
• All stainless bolts.
DESCRIPTION
VALVE-FP BOLTED 1-1/2" 90DEG W/ANGLE HOSE END
VALVE-STD BOLTED 2" 90DEG W/ANGLE HOSE END
VALVE-FP BOLTED 2" 90DEG W/ANGLE HOSE END
VALVE-1" SINGLE UNION POLY W/ANGLE HOSE END
NOZZLE-1" REPLACEMENT PIPE
Fertilizer - Liquid
PART NUMBER
VA150
VA200
VA200FP
UVA-100FP
V-10161
Union Valves
Polypropylene Single Union Ball Valve Features:
• Precision molded in glass reinforced polypropylene for strength and chemical resistance.
• PTFE seats for smooth operation and proper sealing characteristics.
• Double O-rings in stem area for extra sealing protection.
• Interlocking body and end plate to allow easy thread connection when installing.
• Maximum operating pressure 100 psi at 70º F.
PART NUMBER
UV-050FP
UV-075FP
UV-100FP
UV-125FP
UV-150FP
UV-200FP
DESCRIPTION
VALVE-BALL 1/2" SINGLE UNION POLY
VALVE-BALL 3/4" SINGLE UNION POLY
VALVE-BALL 1" SINGLE UNION POLY
VALVE-BALL 1-1/4" SINGLE UNION POLY
VALVE-BALL 1-1/2" SINGLE UNION POLY
VALVE-BALL 2" SINGLE UNION POLY
www.feiinc.com
291
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Fertilizer - Liquid
Manifold Valves
292
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Valves
Ball
Banjo Poly
Manifold Valves
Manifold 6 and 8 Bolt Ball Valve Features:
• FKM (viton type) seals.
• PTFE self-lubricating stem bushings and seats cannot stick or bind.
• Precision molded polypropylene that is reinforced with fiberglass for additional strength.
• Self-aligning ball moves freely against the PTFE seats for smooth operation.
• The valve opens and closes with very little pressure on the handle.
• Ball is diamond turned after molding to make it spherically perfect, which provides precise contact between ball and seats.
Manifold “Stubby” Valve Features:
• Stainless steel bolts.
• Glass reinforced polypropylene.
• Multiple design options.
Unique patented compact design.
Lightweight.
Maximum operating pressure 100 psi at 70º F. 75 psi
at 150º F.
DESCRIPTION
VALVE-MFLD BALL 1" FLG X 1" STD PORT
VALVE-MFLD BALL 2" FLG X1-1/2" STD PORT
VALVE-MFLD BALL 2" FLG X 2" FP
VALVE-MFLD 3" STD PORT
VALVE-MFLD BALL 3" FLG X 3" FP
VALVE-MFLD 2" STD PORT FLG X 2" MPT
VALVE-MFLD 2" STD PORT FLG X 2" ML ADAPTER
VALVE-MFLD 2" FP FLG X 2" FPT STUBBY
VALVE-MFLD 2" FP FLG X 2" ML ADAPTER STUBBY
VALVE-2" FP FLG X 2" FP FLG STUBBY
VALVE-MFLD STUBBY 2" FP FLG X 2" MNPT STUBBY
VALVE-MFLD 2" FP FLG X 2" FP FLG W/SS BALL, STEM & HANDLE
VALVE-MFLD 2" FP FLG X 2" ML W/SS BALL, STEM & HANDLE
VALVE-MFLD 3" FLG X 3" ML ADAPTER
VALVE-MFLD 3" FP FLG X 3" ML ADAPTER
VALVE-MFLD STUBBY 3" FLG X 3" MNPT
VALVE-3" FLG X 3" FLG
VALVE-MFLD 3" FP FLG X 3" FP FLG
VALVE-MFLD 3" FP FLG X 3" ML ADAPTER W/SS BALL,STEM,HANDLE
VALVE-MFLD STUBBY 3" FP FLG X 3" MNPT W/SS BALL,STEM,HANDLE
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
MV100CF
MV200CF
MV220CF
MV300
MV300CF
VSMT-200CF
VSF200CF
MVS220FP
MVSF220FP
MVS220CF
MVSMT220FP
MVS220HSFP
MVSF220HSFP
MVSF300
MVSF300FP
MVSMT300
MVS300CF
MVS300CFFP
MVSF300HSFP
MVSMT300HSFP
•
•
•
293
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Valves
Ball
Banjo Poly
Fertilizer - Liquid
3-Way Manifold Valves
3 Way Manifold Ball Valve Features:
• Stainless steel bolts.
• Precision molded polypropylene reinforced with
fiberglass for additional strength.
• Self-aligning ball moves freely against the PTFE seats
for smooth operation.
• The valve opens and closes with very little pressure on
the handle.
•
•
•
•
Ball is diamond turned after molding to make it
spherically perfect, which provides precise contact
between ball and seats.
PTFE self-lubricating stem bushings and seats cannot
stick or bind.
Maximum operating pressure 100 psi.
FKM (viton type) seals.
Bottom Load: Directional flow right or left, valve can be turned off to stop flow.
Side Load: Directional flow right or left, valve cannot be turned off.
PART NUMBER
MV100BL
MV100SL
MV200BL
MV200SL
MV220BL
MV220SL
MV300BL
294
DESCRIPTION
VALVE-MFLD BALL 1" FLG 3-WAY BOTTOM LOAD
VALVE-MFLD BALL 1" FLG 3-WAY SIDE LOAD
VALVE-MFLD BALL 2" FLG 3-WAY BOTTOM LOAD
VALVE-MFLD BALL 2" FLG 3-WAY SIDE LOAD
VALVE-MFLD BALL 2" FLG FP 3-WAY BOTTOM LOAD
VALVE-MFLD BALL 2" FLG FP 3-WAY SIDE LOAD
VALVE-MFLD BALL 3" FLG FP 3-WAY BOTTOM LOAD
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Valves
Butterfly
Butterfly valves produce dependable bubble tight shutoff and are ideally suited for throttling control applications
because the flow is near linear over 70% of the flow range. They can be operated manually, mechanically or
automatically and they can be used in handling a variety of media, including liquids, solids, slurries, gases and vapor.
These butterfly valves feature a cast iron body, 316 stainless steel disc and stem and an EPDM seat. They are rated at
150 psi, flanges not included.
PART NUMBER
BV-2A
BV-3A
BV-4A
CDLE040000
CSLB04000
DESCRIPTION
VALVE-2" BUTTERFLY SS STEM/DISC EPDM SEAT
VALVE-3"BUTTERFLY SS STEM/DISC EPDM SEAT
VALVE-4"BUTTERFLY SS STEM/DISC EPDM SEAT
VALVE-4" BUTTERFLY 8-BOLT CS STEM/DISC EPDM SEAT
VALVE-4" BUTTERFLY 8-BOLT SS STEM/DISC BUNA SEAT
Check
PVC
PVC inline check valves are entirely constructed of plastic and stainless steel materials to ensure corrosions resistance.
They give positive back flow prevention with the use of a spring loaded PVC poppet and may be used in any position.
Features a ½ pound stainless steel spring and has a maximum service temperature of 140º F. and pressure rating of
200 psi at 73º F.
Fertilizer - Liquid
PART NUMBER
203-103
203-104
203-105
203-106
203-107
203-108
DESCRIPTION
VALVE-1/2"FPT PVC CHECK
VALVE-3/4" FPT PVC CHECK
VALVE-1"FPT PVC CHECK
VALVE-1-1/4"FPT PVC CHECK
VALVE-1-1/2"FPT PVC CHECK
VALVE-2" FPT PVC CHECK
Stainless Steel
Stainless Steel Check Valve Features:
• Solid 304 stainless steel body construction.
• Corrosion resistant materials.
• Stainless steel poppet, spring and lock nut.
• Abrasion resistant Viton O-ring fitted to
poppet for positive seal.
PART NUMBER
CVSE50
CVSE75
CVSE100
CVSE125
CVSE150
CVSE200
CVSE300
CVSE400
•
•
Deirin guide bearing assures smooth
operation of poppet stem.
One pound stainless steel spring with 200
psi rating.
DESCRIPTION
VALVE-CHECK 1/2" FPT SS 1/2" PSI
VALVE-CHECK 3/4" FPT SS 1/2" PSI
VALVE-CHECK 1" FPT SS 1/2" PSI
VALVE-CHECK 1-1/4" FPT SS 1/2" PSI
VALVE-CHECK 1-1/2" FPT SS 1/2" PSI
VALVE-CHECK 2" FPT SS 1/2" PSI
VALVE-CHECK 3" FPT SS 1/2" PSI
VALVE-CHECK 4" FPT SS 1/2" PSI
www.feiinc.com
295
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Valves
Check
Banjo Poly
Fertilizer - Liquid
Polypropylene Check Valve Features:
• One piece construction.
• Glass reinforced polypropylene.
• 150 psi maximum.
PART NUMBER
MCV100
MCV200
MCV220
MCV300
CV221
CV300
296
•
•
316 stainless steel springs.
EPDM gasket.
DESCRIPTION
VALVE-CHECK 1" FLANGED POLY 1-2 PSI
VALVE-CHECK 2" FLANGED POLY 1-2 PSI
VALVE-CHECK 2" FP FLANGED POLY 1-2 PSI
VALVE-CHECK 3" FLANGED POLY 1-2 PSI
VALVE-CHECK 2" TRUE FP FML
VALVE-CHECK 3" FPT FP POLY 1-2 PSI
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Valves
TeeJet Directo Valves
Electric Shut Off and Regulating Valves
PART NUMBER
344BE-2F-C
344BEC-23-C
344BEC-24-C
344BEC-24S-C
344BEC-33-C
344BEC-34-C
344BPR-23-03C
344BPR-24-03C
344BPR-33-03C
344BR-23-03C
344BR-2FS-03C
346BEC-25-C
346BEC-35-C
346BPR-35-03-C
356BEC-C
50515-22CP05
DESCRIPTION
VALVE-SHUTOFF 50 SERIES FLG 2WAY ELEC BALL
VALVE-SHUTOFF 3/4" 2WAY FPT ELEC BALL
VALVE-SHUTOFF 1" 2WAY FPT ELEC BALL
VALVE-SHUTOFF 1" 2WAY FPT ELEC BALL SS
VALVE-SHUTOFF 3/4" 3WAY FPT ELEC BALL
VALVE-SHUTOFF 1" 3WAY FPT ELEC BALL
VALVE-PRESSURE REGULATNG 3/4" 2WAY 3RPM MOTR 0.5 METER CABLE
VALVE-PRESSURE REGULATING 1" 2WAY 3RPM MOTR 0.5 METER CABLE
VALVE-PRESSURE REGULATING 3/4" 3WAY 3RPM MOTR 0.5 METER CABLE
VALVE-REGULATING 3/4" 2WAY 3RPM MOTOR 0.5 METER CABLE
VALVE-REGULATING NO CONNECTOR
VALVE-SHUTOFF 1-1/4" 2WAY
VALVE-SHUTOFF 1-1/4" 3WAY
VALVE-ELEC REGULATING 1-1/4" 3RPM 12SEC
VALVE-SHUTOFF
MOTOR-REPLACEMENT BEC POS ON/OFF ONLY
www.feiinc.com
297
Fertilizer - Liquid
Directo Electric Shutoff Valve Features:
• 344 series 22 RPM, 0.7 second shutoff fully open to close.
• 346 and 356 series 25 RPM, 0.6 second shutoff fully open to close.
• Available in 2 or 3 way versions. 2 way valves allow complete shutoff while the 3 way valves divert flow to a bypass line when
boom controls are shut off.
• Stainless steel stem with optional polypropylene or stainless steel ball.
• Maximum pressure rating 344 series: 300 psi (20 bar), 346 and 356 series: 150 psi (10 bar).
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Fertilizer - Liquid
Manifold Valves
The 430 series 3-way shutoff manifold features a 3-way, metered bypass ball valve design. The 3-way configuration, commonly used
with positive displacement pumps, allows a constant system pressure to be maintained regardless of the valve being in the on or off
position.
• Maximum pressure rating of 215 psi (15 bar).
• ¼ turn ball valve design for positive shutoff.
• The flow rate is 11.7 gpm (44 L/min.) at 5 psi (0.34
• User configurable bypass settings with markings on
bar) pressure drop, 16.5 gpm (63L/min.) at a 10 psi
dial for quick and easy adjustment.
(0.69 bar) drop.
• Motor assembly features built-in miniature DIN
electrical connector and is IP67 rated.
• Also available in 2-way and back flow versions.
• All metal gear train with stainless steel ball and stem
provides excellent wear life.
450BEC manifolds are available with E or EC series motors with cable or DIN electrical connections.
• Maximum pressure rating of 200 psi (14 bar).
• Available in 2-way and flow back versions. Pressure
regulating valves can be incorporated.
• The flow rate for the 450BEC 2-way valve is 32 gpm
(121 L/min.) with 5 psi (0.34 bar) pressure drop, 45
• Flexible inlet/outlet connections allow for quick, simple
gpm (170 L/min.) with 10 psi (0.69 bar) pressure drop.
plumbing for as many valves as needed for your
sprayer.
• Stainless steel stem with optional polypropylene or
stainless steel ball.
The 450FB flow back valves allow pressure from the boom lines to be relieved back to the tank when the valve is switched to the off
position. Available with E or EC series motors with cable or DIN electrical connections.
• The flow rate is 32 gpm (120 L/min.) with 5 psi (0.34
• With a choice of threaded, quick connect hose barbs
bar) pressure drop per valve, 45 gpm (170 L/min.) with
or 50 series flange fitting outlet connections, the
10 psi (0.69 bar) pressure drop.
450FB manifolds allow quick, simple plumbing for as
many valves as needed for your sprayer.
• Maximum pressure rating of 200 psi (14 bar).
• Choice of polypropylene or stainless steel ball with
• The 450 valve series is also available in a 2-way
stainless steel stem,
version.
298
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Valves
TeeJet Directo Valves
Manifold Valves
The 460BEC ball valve manifold utilizes a compact design that provides reliable
Available with E or EC series motors with cable or DIN electrical connections.
• With a choice of threaded, quick connect hose barbs
•
or 50 series flange fitting outlet connections, the
460BEC manifold allows quick, simple plumbing for as
many valves as needed for your sprayer.
•
• Stainless steel stem and ball.
•
PART NUMBER
431EC-3-D
451BEC-24-C
453BEC-24-C
453BEC-3FB4C
461BEC-2F-C
463BEC-2F-C
performance at a wide range of operating procedures.
The flow rate is 25 gpm (94 L/min.) at 5 psi (0.34 bar)
pressure drop, 35 gpm (132 L/min.) at 10 psi (0.69
bar) pressure drop.
Maximum pressure rating of 300 psi (20 bar).
The 460BEC valve series is also available in 3-way and
flow back versions.
DESCRIPTION
VALVE-MANIFOLD 3 WAY
VALVE-MANIFOLD 450 SERIES SINGLE VALVE
VALVE-MANIFOLD 450 SERIES THREE VALVE ASSY
VALVE-MANIFOLD 450 SERIES 3 VALVE W/FLOWBACK
VALVE-MANIFOLD 460 SERIES 2 WAY SINGLE VALVE
VALVE-MANIFOLD 460 SERIES TWO WAY THREE VALVE ASSY
Fertilizer - Liquid
www.feiinc.com
299
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Valves
TeeJet Directo Valves
Electric Solenoid Valves and Repair Parts
AA144P-, AA144A-, AA145H-, DirectoValve control valves operate on 12 VDC system with a maximum pressure of 100 psi (7 bar). They
feature a polypropylene body for chemical resistance, EPDM diaphragms and seat washers, with Viton optional. These control valves
provide continuous flow through bypass connection, with flow to spray line controlled by the valve on-off action.
Fertilizer - Liquid
AA144P DirectoValve control valves have a polypropylene body for chemical resistance and a flow rate of 10 gpm (38 L/min.) at 5 psi (0.34
bar) pressure drop, 14 gpm (53 L/min.) at 10 psi (0.69 bar) pressure drop.
AA144A valve is for pressures up to 100 psi (7 bar).
• Flow Rate: 10 gpm (38 L/min.) at 5 psi (0.34 bar) pressure drop, 14 gpm (53 L/min.) at 10 psi (0.69 bar) pressure drop.
• Can be ganged with other 144A DirectoValve control valves.
• Also available as 2 or 3 unit assembly (3 unit shown as part number AA144A-3).
AA144A-1-3 is a 3-way solenoid operated control valve that bypasses boom flow to maintain constant spraying pressure when one or
more boom sections are shut off. To maintain pressure with a 23520 throttling valve, outlet 2 must be throttled to match the total capacity
of the nozzles on that boom section.
• For pressures to 65 psi (4.5 bar).
• Flow Rate: 8 gpm (30 L/min.) at 5 psi (0.34 bar) pressure drop, 11 gpm (42 L/min.) at 10 psi (0.69 bar) pressure drop.
• Chemical resistant EPDM diaphragms and seat washers.
AA145H Control Valves
• Flow Rate: 15 gpm (57 L/min.) at 5 psi (0.34 bar) pressure drop, 21 gpm (79 L/min.) at 10 psi (0.69 bar) pressure drop.
• Can be ganged with other 145H DirectoValve control valves.
• Fiberglass reinforced Nylon body.
PART NUMBER
AA144P-1
AA144A-1
AA144A-3
AB144-1-KIT
AA144A-1-3
AA144A-3-3
AB144-1-3-KIT
AA144A-1-VI
AB144A-1-VI-KIT
AA145H-1
AB145-KIT
AA145H-1-VI
AB145H-VI-KIT
300
DESCRIPTION
VALVE-DIRECTO
VALVE-3/4" 2WAY ELEC 1 UNIT DIRECTO
VALVE-3/4" 2WAY ELEC 3 UNIT DIRECTO
KIT-REPAIR PK-AB144-1-KIT
VALVE-3/4" 3WAY ELEC 1 UNIT DIRECTO
VALVE-3/4" 3WAY ELEC 3 UNIT DIRECTO
KIT-REPAIR PK-AB144-1-3-KIT
VALVE-3/4" 2WAY ELEC 1 UNIT DIRECTO VITON SEALS
KIT-REPAIR VITON
VALVE-1" 2WAY ELEC 1 UNIT DIRECTO NYLON
KIT-REPAIR PK-AB145A-KIT
VALVE-1" 2WAY ELEC 1 UNIT DIRECTO VITON SEALS
KIT-REPAIR DIRECTOVLV
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
NOTES
Fertilizer - Liquid
www.feiinc.com
301
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Valves
TeeJet Directo Valves
Fertilizer - Liquid
Manual Relief - Regulating Control Valves
Piston type pressure relief and regulating valves are for bypass of excess liquid. Adjustable to maintain control of line pressure at any
pressure within the valve’s operating range. Selected pressure setting firmly held in place by locknut with extra-large valve passages to
handle large flows.
• Model 23120 has 302 stainless steel spring and EPDM
• ¼" port for pressure gauge pipe plug included.
O-ring.
• Model 23120A comes with 316 stainless steel spring
• Excellent chemical resistance.
and Viton O-ring.
6815 is brass with hardened stainless steel seat.
Type 110 has a removable bonnet for servicing unit without removing valve from line.
8460 diaphragm type pressure relief and regulating valves feature a positive locknut to hold adjustment screw firmly in place. Extra-large
valve passages to handle full flow from supply line. It is not affected by jarring and vibration.
• Flow rate to 65 gpm (212 L/min.) for ½" and 70 gpm (265 L/min.) for ¾".
• 8460-*-50 uses stainless steel spring while 8460-* uses steel springs, responsive to the pressure range of each valve.
Throttling valve 23520 is for regulating flow in systems equipped with centrifugal pumps where sensitive regulation is required or to
control flow in jet agitator return lines. Locknut holds pressure setting firmly in place. Type 23520 has polypropylene construction for
excellent chemical resistance.
• Pressures to 150 psi (10 bar).
• 10 psi (0.6 bar) pressure drop at 6 gpm (37.8 L/min.)
flow rate for ½"; 18 gpm (69 L/min.) for ¾" size.
• ½" and ¾" NPT or BSPT connections.
Manual control valve model 6B is molded of corrosion resistant materials; all wetted parts are polypropylene, stainless steel and
polyethylene and has a molded in mounting flange and 1/4" NPT gauge port.
• Valves can be ganged together using hex nipple for
• Maximum pressure of 150 psi (10 bar).
multiple boom control.
• Flow rate: 12 gpm (47 L/min.) at 5 psi (0.34 bar)
• Easily repaired without removing valve from spray line.
pressure drop, 17 gpm (64 L/min.) at 10 psi (0.69 bar)
pressure drop.
Type AA control valves are for selective control of three section boom sprayers at pressures up to 300 psi (20 bar). They feature aluminum
construction with stainless steel and plastic internal parts for maximum corrosion resistance.
• Use to open any of three boom section lines in any desired combination.
• Raise lever to open, lower lever to close the valve without changing the indexed position.
302
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Valves
TeeJet Directo Valves
Manual Relief - Regulating Control Valves
DESCRIPTION
VALVE-RELIEF 1/2" POLY
VALVE-RELIEF 3/4" POLY
VALVE-RELIEF 1/2" POLY W/SS SPRING
VALVE-RELIEF 3/4" POLY W/SS SPRING
VALVE-THROTTLING 1/2" POLY
VALVE-THROTTLING 3/4" POLY
VALVE-PRESSURE RELIEF 3/4" 50PSI BRASS
VALVE-PRESSURE RELIEF 3/4" 700PSI BRASS
VALVE-PRESSURE RELIEF 1/4" 300PSI BRASS
VALVE-PRESSURE RELIEF 1" 150PSI ALUMINUM
VALVE-PRESSURE RELIEF 1" 150PSI DUCTILE IRON
VALVE-PRESSURE RELIEF 1-1/4" 150PSI ALUMINUM
VALVE-PRESSURE RELIEF 1-1/2" 150PSI ALUMINUM
VALVE-PRESSURE RELIEF 1-1/2" 150 PSI DUCTILE IRON
VALVE-PRESSURE RELIEF 8460 1/2
VALVE-3/4 300-NYLON PRESS/RELI
VALVE-PRESSURE RELIEF 50 LBS
VALVE-MANUAL BOOM 3/4" INLET X 1/2" OUTLET
VALVE-CONTROL 3/4" NPT 300PSIA TEEVALVE
VALVE-ASSY 1
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
23120-1/2-PP
23120-3/4-PP
23120A-1/2-PP
23120A-3/4-PP
23520-1/2-PP
23520-3/4-PP
6815-3/4-50
6815-3/4-HSS-700
AA110-1/4-300
AA110-1-AL
AA110-1-DI
AA110-1-1/4-AL
AA110-1 1/2-AL
AA110-11/2-DI
8460-1/2
8460-3/4
8460-3/4-50
AA6B
AA17L
AA17Y
303
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Valves
MicroMatic Drum Valve System
Extractor Valves and Dip Tube
RSV 743 series container valves are for use with 3 key RSV couplers for closed liquid transfer.
RSV down tube 743-203 connects to RSV container valve to create the valve assembly. HDPE and stainless steel construction and is
straight cut with bellow foot base, 31.89" long x 1" diameter.
Fertilizer - Liquid
741-015 stainless steel installation tool attaches to a standard torque wrench with 1/2" drive to install the 3 key RSV valve assembly into a
container.
PART NUMBER
743-007
743-008
743-086
743-087
102-108
102-102
743-203
741-015
DESCRIPTION
VALVE-RSV CONTAINER 2" BSP THREAD EPDM 3KEY
VALVE-RSV CONTAINER 2" BSP THREAD VITON 3KEY
VALVE-RSV CONTAINER 2-1/2" X 5 BUTTRESS THREAD EPDM 3KEY
VALVE-RSV CONTAINER 2-/2" X 5 BUTTRESS THREAD VITON 3KEY
RING-SEALING 2" BSP VITON
RING-BUTTRESS SEALING 2-1/2" VITON
TUBE-ASSY FLEX MICRO MATIC EXTRACTOR
TOOL-INSTALL/REMOVAL 3 PIN
Drum Valve
RSV dispensing coupler 744-002 and 744-003 are for use with 3 key RSV container valves for
closed liquid dispensing, stainless steel construction with a 1" BSPT female liquid outlet.
PART NUMBER
744-002
744-003
744-113
102-056
102-062
102-067
102-068
102-073
102-074
304
DESCRIPTION
COUPLER-DRUM VALVE EPDM
COUPLER-DRUM VALVE VITON
HANDLE-REPLACEMENT DH2501
SEAL-UPPER NRV
O-RING-BODY VITON
GASKET-MAIN DRUM VALVE EPDM
GASKET-MAIN DRUM VALVE VITON
SEAL-COUPLER PROBE EPDM
SEAL-COUPLER PROBE VITON
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Valves
MicroMatic Drum Valve System
Macro Valves
724-065 and 724-067 dispensing couplers are for use with 3F key MAV container valves for closed liquid filling. They feature a casted
stainless steel body and 304 stainless steel probe with 1" NPT male liquid outlet x 1/4" NPT female air inlet.
PART NUMBER
DESCRIPTION
724-026
COUPLER-MAV FILL 3F KEY VITON SEALS
724-065
COUPLER-MACRO VALVE VITON W/RELIEF
724-067
COUPLER-MACRO VALVE EPDM W/RELIEF
100-615
SPRING-NRV MACRO VALVE
102-525
SEAL-PROBE EPDM
102-875
SEAL-PROBE VITON
102-553
GASKET-MAIN EPDM
102-874
GASKET-MAIN VITON
102-746
O-RING-EDPM
102-872
O-RING-VITON
724-102
PIN-HANDLE HINGE
724-106
ADAPTER-THREAD ASSY
724-110
HANDLE-ASSY ENGO
724-320
RETAINER-NRV SPRING
www.feiinc.com
305
Fertilizer - Liquid
724-026 fill coupler is for use with 3F key MAV container valves for closed liquid filling. This coupler features a casted stainless steel body
and 304 stainless steel probe with 1" NPT male liquid inlet x 1/4" NPT female inlet.
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Valves
MicroMatic Drum Valve System
Rinsing Sockets
MicroMatic rinsing sockets are a maintenance devise used to flush couplers and dispensing systems (hoses, pumps and meters) to
maximize service life, 304 stainless steel construction. The stainless steel mounting bracket CC2302 is used to mount the coupler when
not in use.
PART NUMBER
CC2301
CC2302
CC2311
CC2511
DESCRIPTION
SOCKET-COUPLER FKM RINSING
BRACKET-COUPLER MOUNTING
SOCKET-COUPLER EPDM RINSING
SOCKET-COUPLER RINSE EPDM
Fertilizer - Liquid
DEF Valves
RVS container valve 743-016 is a closed, sealed and secure container valve for keyed systems that helps maintain diesel exhaust fluid
purity from the manufacturer to the end user. Stainless steel construction and is compatible with 55 gallon drums. It has a Viton seal, dry
disconnect and 2" BSP buttress, for use with RSV 4 pin couplers. 743-096 has the same features as 743-016 with 2.5 x 5" buttress.
The heavy duty stainless steel RSV coupler 744-050 is used for dispensing product only. The 3/4" BSPP connects to the suction side of the
pump hose. The integrated low vacuum break umbrella check valve built in allows for make-up air. It has a Viton seal, dry disconnect and
is compatible with 55 gallon drums. Maximum flow rate is 24 gpm (water at ambient temperature).
7339 Pro-Blend closed IBC mixer and 7340 Pro-Blend closed drum mixer are versatile systems that deliver complete mixing and more
®
efficient operations while reducing worker and environmental exposure. The innovative Pro-Blend closed mixing system utilizes timed
pulses of pressurized air that quickly and completely mixes the contents of a container such as a drum or an IBC. It delivers a thoroughly
homogeneous mix more quickly, more safely and with less work than alternatives.
®
PART NUMBER
743-016
743-096
744-050
7339
7340
306
®
DESCRIPTION
VALVE-RSV CONTAINER 2" BSP THREAD VITON 4KEY
VALVE-RSV CONTAINER 2-1/2" X 5 BUTTRESS THREAD VITON 4KEY
VALVE-ONE WAY 4 PIN
MIXING SYSTEM-CLOSED IBC PRO-BLEND-CHEMICAL USE
MIXING SYSTEM-CLOSED DRUM PRO-BLEND-CHEMICAL USE
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Valves
Dry Disconnect
Poppet Couplings
Banjo DPC series dry poppet polypropylene precision molded couplings are easy to use, lightweight and economical. They reduce risk of
exposure with minimal fluid spillage and offer a wide range of chemical resistance.
• Maximum operating pressure 70 psi at 70º F.
• Maximum flow of 30 gpm.
• Maximum operating temperature 150º F.
• 1" female NPT threads.
PART NUMBER
PF-501-8FP
PF-502-8FP
PF-1001-16FP
PF-1002-16FP
PF-1002-32MB
PF-1002-32MP
DPCF100
DPCM100
DPCMT100
DESCRIPTION
COUPLER-1/2" FML FPT
COUPLER-1/2" NIPPLE ML FPT
COUPLER-1" FML X FPT POLY
COUPLER-1" ML X FPT POLY
COUPLER-2" BUT ML NIPPLE T ADAPTER
COUPLER-1" NIPPLE X 2" NPT
COUPLER-FEMALE 1" FPT
ADAPTER-MALE 1" FPT
ADAPTER-MALE 2" MPT X 1" FPT
www.feiinc.com
307
Fertilizer - Liquid
Parker PF series push to connect, dry disconnect couplings virtually eliminate fluid loss upon disconnection and are designed to help meet
the demand for closed system transfer and dispensing of chemicals and fluids with minimal environmental contamination. These
polypropylene couplers can be used with concentrated or diluted industrial chemicals, fertilizers, herbicides, insecticides, fungicides or
pesticides when transferring from bulk storage tanks, returnable containers, applicators, etc. Couplers have a 316 stainless steel spring
and fluorocarbon seal.
• PF-501-8FP and PF-502-8FP 100 psi at 68º F., flow rate of 12 gpm, 1/2" female NPT.
• PF1001-16FP and PF-1002-16FP 60 psi at 68º F., flow rate of 20 gpm, 1" female NPT.
• PF-1002-32MB 100 psi at 68º F., flow rate of 50 gpm, modified buttress.
• PF-1002-32MP 60 psi at 68º F., flow rate of 20 gpm, modified NPS.
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Valves
Dry Disconnect
Fertilizer - Liquid
Banjo Dry-Mate Valves
Polypropylene Features:
• Lightweight, easy to use and economical.
• Unrestricted flow.
• Minimal fluid spillage.
• Reduces risk of exposure.
•
•
•
•
Wide range of chemical resistance.
Cannot be uncoupled in open position.
Spillage Data: 1-1/2" = 2 ml and 2" = 2 ml.
Maximum operating pressure 100 psi at 70º F. or 70
psi at 150º F.
Full Port Stainless Steel Features:
When liquid is flowing, Dry-Mate halves cannot be uncoupled without turning handles to closed position. When Dry-Mate halves are apart,
handles cannot be turned to open position.
• 316 stainless steel construction.
• 100 psi maximum operating pressure.
• FKM (viton type), EPDM and Kalrez face seals.
• 300º F. maximum operating temperature.
• PTFE ball seats.
• Spillage Data: 1" = 1 ml, 1-1/2" and 2" = 2 ml.
PART NUMBER
DM100ASS
DM100DSS
DM200AD
DM150AE
DM150DE
DM200A
DM200D
DM200ACF
DM200DCF
DM200ASS
DM200DSS
DM300AFP
DM300DFP
308
DESCRIPTION
DRY MATE-1" MNPT SS
DRY MATE-1" FNPT SS
SET-DRY MATE 2" POLY
DRY MATE-1-1/2" ML
DRY MATE-1-1/2" FML
VALVE-2" MPT DRY MATE
VALVE-2" FPT DRY MATE
VALVE-MANIFOLD 2" SP ML FLG DRY-MATE
VALVE-MANIFOLD 2" SP FML FLG DRY-MATE
ADAPTER-2" ML X 2" FML SS
COUPLER-2" FML X 2" FML SS
VALVE-3" FP ML DRY MATE
VALVE-3" FP FML DRY MATE
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Valves
Banjo Electric
On/Off Valves
•
•
•
•
•
EPD seals.
Fiberglass reinforced polypropylene ball.
Integrated mounting slot.
Standard 3 wire configuration.
Max pressure 200 psi at 70º F.
3/4" - 2" Threaded and Threaded with Flanged Inlet Electric Valve Features:
• 316 stainless steel.
• 12 Volt DC operated, 24 Volt available in most models.
• Stainless steel hardware.
• Maximum pressure 150 psi at 70º F.
• Fiberglass reinforced polypropylene.
• Easily repairable.
• Glass reinforced PTFE seats.
• Open/closed indicator.
• FKM (viton type) or EPDM O-rings.
BOTTOM AND SIDE LOAD: Directional flow right or left, valve flow cannot be turned off.
PART NUMBER
LEV050
EV075
EV075BL
EV075SL
EV100FP
EV100SL
EV125
EV125-24
EV125SL
EV150
EV200
EV204FP
EV4100
DESCRIPTION
VALVE-LEV 1/2" ON/OFF 3 WIRE 12V DC EPDM
VALVE-ELEC ON/OFF 3/4" 3/4 SEC RESPONSE TIME
VALVE-ELEC ON/OFF BTM LOAD 3/4" 3/4 SEC RESPONSE TIME
VALVE-ELEC REGULATING SDE LOAD 3/4" 3/4 SEC RESPONSE TIME
VALVE-ELEC ON/OFF 1" FP 3/4 SEC RESPONSE TIME
VALVE-ELEC REGULATING SDE LOAD 1" 3/4 SEC RESPONSE TIME
VALVE-ELEC ON/OFF 1-1/4" 3/4 SEC RESPONSE TIME
VALVE-1-1/4" ELEC 24V 3/4 SEC 3 WIRE
VALVE-ELEC REGULATING SDE LOAD 1-1/4" 3/4 SEC RESPONSE TIME
VALVE-1-1/2" ELEC ON/OFF
VALVE-BALL 2" ELEC
VALVE-2" ELEC FP ON/OFF
MOTOR ONLY-BANJO ON/OFF 1-1/2" & 2"
www.feiinc.com
309
Fertilizer - Liquid
1/2" Threaded Electric Valve Features:
• 12 Volt DC.
• Stationary current draw less than 0.04 amps.
• Rotating current draw less than 0.40 amps.
• Stall current 0.75 amps.
• Response time 1/3 sec open to close.
• TFM seats.
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Valves
IBC Tank Valves and Accessories
Fertilizer - Liquid
IBC Valves
Spin Weld Ball Valve Features:
• PTFE valve seats.
• FKM (viton type) stem O-rings.
• Polypropylene construction.
PART NUMBER
WSF210
WSF223MR
WSFBC210
WSMT203MR
WSMT210
WSMT210FSA
VSMT202MR
VFB201
310
•
•
•
Zinc alloy collar.
Maximum operating pressure 20 psi at 70º F.
Handles close in either direction.
DESCRIPTION
VALVE-ALIGNMENT SCHUTZ
VALVE-2" POLY ML QD W/EPDM MAUSER
VALVE-ONE WAY CHECK FOR EPA TOTES 70MM
VALVE-2" MPT OUT X 83 INLT POLY
VALVE-SCHUTZ POLY SPINWELD 2" MPT
VALVE-2" MPT SCHUTZ ALIGNMENT W/SEAL
VALVE-2" MNPT OUTLET X 60MM COLLAR
VALVE-2" B-F HOOVER TUFF YTANK
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Valves
IBC Tank Valves and Accessories
IBC Accessories
DESCRIPTION
CAP-2" FML NPT W/GASKET
CAP-DUST NPT YELLOW W/GASKET
CAP-DIN 60MM BUTTRESS THREAD
ADAPTER-2" BTRS X 2" MPT GASKET
ADAPTER-BUTTRESS 2" X 2" ML W/GASKET
LANYARD-11" POLY
LID-TANK 5-1/2" NON-VENTED
LID-TANK 5-1/2" VENTED
LID-TANK 6" SOLID W/GASKET EPDM
LID-TANK 6" W/VENTED 2" PLUG W/GASKET EPDM
Fertilizer - Liquid
PART NUMBER
201FPT
211FPT
60FDIN
TA283
TA283QD
V20207
TL600
TL600C
TL650E
TL652E
Deadman Handle
•
•
•
•
•
•
•
•
2 piece standard port
Threaded connection
2000 WOG
Spring return handle
PART NUMBER
LP-100-932DH
LP-100-933DH
LP-100-934DH
Fail safe position
Solid ball construction
29 in-Hg vacuum rating
100% leak tested
DESCRIPTION
VALVE-BALL 3/8" DEADMAN HANDLE
VALVE-BALL 1/2" DEADMAN HANDLE SS
VALVE-BALL 3/4" DEADMAN HANDLE 2 PIECE SS
www.feiinc.com
311
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pressure Gauges
Dry Gauge 2" Brass Stem
To determine the correct gauge, environment along with normal operating system pressure must be
considered. The pressure range of the gauge should be twice the normal system pressure to
maximize gauge life and accuracy. Feature bottom mount design with brass stem.
PART NUMBER
SG302
SG602
SG602C
SG1002
SG1002C
SG1602
SG2002
SG2002C
SG3002
SG3002C
DESCRIPTION
GAUGE-1/4" MPT BRASS BTM MT 2" DRY 0-30 PSI
GAUGE-1/4" MPT BRASS BTM MT 2" DRY 0-60 PSI
GAUGE-1/4" MPT BRASS BCK MT 2" DRY 0-60 PSI
GAUGE-1/4" MPT BRASS BTM MT 2" DRY 0-100 PSI
GAUGE-1/4" MPT BRASS BCK MT 2" DRY 0-100 PSI
GAUGE-1/4" MPT BRASS BTM MT 2" DRY 0-160 PSI
GAUGE-1/4" MPT BRASS BTM MT 2" DRY 0-200 PSI
GAUGE-1/4" MPT BRASS BCK MT 2" DRY 0-200 PSI
GAUGE-1/4" MPT BRASS BTM MT 2" DRY 0-300 PSI
GAUGE-1/4" MPT BRASS BCK MT 2" DRY 0-300 PSI
Liquid Filled Gauge 2-1/2" Brass Stem
Fertilizer - Liquid
These gauges are designed for use with any medium not corrosive to brass or bronze. Liquid filled
gauges are recommended for reducing shock caused by pressure fluctuations or vibration.
Features bottom mount brass 1/4" MNPT stem and 304 stainless steel case.
PART NUMBER
GG30
GG60
GG100
GG160
GG200
GG300
GG400
WGG60C
WGG100C
WGG160C
WGG200C
WGG300C
WGG400C
312
DESCRIPTION
GAUGE-1/4" MPT BRASS BTM MT 2-1/2" LIQ 0-30 PSI
GAUGE-1/4" MPT BRASS BTM MT 2-1/2" LIQ 0-60 PSI
GAUGE-1/4" MPT BRASS BTM MT 2-1/2" LIQ 0-100 PSI
GAUGE-1/4" MPT BRASS BTM MT 2-1/2" LIQ 0-160 PSI
GAUGE-1/4" MPT BRASS BTM MT 2-1/2" LIQ 0-200 PSI
GAUGE-1/4" MPT BRASS BTM MT 2-1/2" LIQ 0-300 PSI
GAUGE-1/4" MPT BRASS BTM MT 2-1/2" LIQ 0-400 PSI
GAUGE-1/4" MPT BRASS BCK MT 2-1/2" LIQ 0-60 PSI
GAUGE-1/4" MPT BRASS BCK MT 2-1/2" LIQ 0-100 PSI
GAUGE-1/4" MPT BRASS BCK MT 2-1/2" LIQ 0-160 PSI
GAUGE-1/4" MPT BRASS BCK MT 2-1/2" LIQ 0-200 PSI
GAUGE-1/4" MPT BRASS BCK MT 2-1/2" LIQ 0-300 PSI
GAUGE-1/4" MPT BRASS BCK MT 2-1/2" LIQ 0-400 PSI
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pressure Gauges
Liquid Filled Gauge 2-1/2" Stainless Stem
These gauges are designed for use with any medium not corrosive to stainless steel. Liquid filled gauges are recommended for reducing
shock caused by pressure fluctuations or vibration. Features bottom mount stainless steel 1/4" MNPT stem and 304 stainless steel case.
Back mount available with WGGSS400C.
DESCRIPTION
GAUGE-1/4" MPT SS BTM MT 2-1/2" LIQ 0-60 PSI
GAUGE-1/4" MPT SS BTM MT 2-1/2" LIQ 0-100 PSI
GAUGE-1/4" MPT SS BTM MT 2-1/2" LIQ 0-160 PSI
GAUGE-1/4" MPT SS BTM MT 2-1/2" LIQ 0-400 PSI
GAUGE-1/4" MPT SS BCK MT 2-1/2" LIQ 0-400 PSI
GAUGE-1/4" MPT SS BTM MT 2-1/2" LIQ 0-3000 PSI
Fertilizer - Liquid
PART NUMBER
WGGSS60
WGGSS100
WGGSS160
WGGSS400
WGGSS400C
WGGSS3000
Dry Gauge 4" Brass Stem
4" gauge with 1/4" brass bottom mount stem, improved visibility for remote installations.
PART NUMBER
SG604
SG1004
DESCRIPTION
GAUGE-1/4" MPT BRASS BTM MT 4" DRY 0-60 PSI
GAUGE-1/4" MPT BRASS BTM MT 4" DRY 0-100 PSI
Liquid Filled Gauge 4" Brass Stem
4" liquid filled gauge with stainless steel case, 1/4" brass bottom mount stem, improved visibility
for remote installations.
PART NUMBER
GG60-4
GG1004
4141GXB300
4240GXB200
DESCRIPTION
GAUGE-1/4" MPT BRASS BTM MT 4" LIQ 0-60 PSI
GAUGE-1/4" MPT BRASS BTM MT 4" LIQ 0-100 PSI
GAUGE-4" DIAL 300 PSI LIQ FILLED SS CASE
GAUGE-4" LIQUID 0-200 PSI BACK MOUNT BRASS
www.feiinc.com
313
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pressure Gauges
Liquid Filled Gauge 4" Stainless Stem
4" liquid filled gauge with stainless steel case, 1/4" stainless steel bottom mount stem.
PART NUMBER
GG60-4A
4154GXX100
4154GXX160
4154GXX200
DESCRIPTION
GAUGE-1/4" MPT SS BTM MT LIQ 0-60 PSI
GAUGE-1/4" MPT SS BTM MT LIQ 0-100 PSI
GAUGE-1/4" MPT SS BTM MT LIQ 0-160 PSI
GAUGE-1/4" MPT SS BTM MT LIQ 0-200 PSI
Fertilizer - Liquid
Gauge Fittings
PART NUMBER
B301AB
LP-1449
LP-MF1814B
314
DESCRIPTION
DAMPENER-GAUGE 1/4" FPT X 1/4" MPT STEEL
ADAPTER-GAUGE 1/4" FPT X 1/4" MPT STEEL
COUPLER-REDUCING 1/4" FPT X 1/8" MPT BRASS
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Meters
Water and Chemical Flow Meters
Great Plains Industries
125340-1the 2" PVC water meter TM200-N is an economical meter for use with water applications and features high flow capacity of 20200 gpm or 76-757 L/min. It is durable and lightweight and easy to install. Operating temperature is 14º F. to 140º F., dimensions 3" W x
4" H x 5-1/2" L.
Economy water meter 113255-4 is mountable to the end of a hose or on a pipe. The compact design and large display makes this meter
handy and easy to read. With a flow range of 3 – 30 gpm (10-100 L/min.), the typical accuracy is ± 2.5%. It is powered by two AAA
batteries.
111200-7 model FM-100H is designed for use with chemicals and has a flow range of 4-20 gpm (15-75 L/min.) with maximum working
pressure of 50 psi (3.5 bar). The lightweight body is cast aluminum for corrosion resistance and has a burnished aluminum finish. The
factory calibration is ± 2% and field calibration is ± 1% accurate. It comes with 1" NPT inlet and outlet ports and has a large reset knob.
120000-1 electronic meter FM-300H-G8N is the most accurate and versatile agricultural chemical meter on the market. The nutating disc
meter with electronic display is factory calibrated for thin and medium to thick fluids, even oil. Factory calibration is ± 2% and field
calibration is ± 0.5%. It has a flow range of 2-20 gpm (7-75 L/min.) and is constructed of corrosion resistant, durable PBT polyester. It
features six digit resettable batch and non-resettable cumulative totalizers. This meter is easy to install and use at the discharge end of
the hose. It is easy to disassemble, clean and maintain. It is powered by a field replaceable 9 Volt battery.
PART NUMBER
120000-1
111507-1
111200-7
113255-4
113520-1
113060-300
125340-1
DESCRIPTION
METER-HERBICIDE/CHEMICAL FM-300H-G8N
KIT-OVERHAUL FM 100H
METER-HERBICIDE/CHEMICAL FM-100H-G8N
METER-WATER 1" ON1 SERIES NYLON
BATTERY-KIT 3N31GM METER
METER-ELECTRONIC/DIGITAL 03N SERIES NYLON 03N31GM
METER-WATER 2" NPT SCH 80 PVC TURBINE DIGITAL
www.feiinc.com
315
Fertilizer - Liquid
113060-300 is a nylon turbine meter for 3 to 50 gpm, LCD read-out with field replaceable batteries and auto on/off. Factory and field
calibrated with 1" NPT and 150 psig. All GPI turbine meters are designed to measure flow in one direction only. This can easily be
identified by a flow direction arrow that is molded into the turbine housing outlet fitting. GPI turbine meters may be installed either
horizontally or vertically, but should be calibrated or verified in the position in which it will be used. Meters are calibrated in the horizontal
position at the factory.
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Meters
Water and Chemical Flow Meters
Fertilizer - Liquid
Sotera
825 positive displacement nutating disc meter is ideal for end of hose use, in line or mounted to a pump. It is able to store and display the
current flow amount (totalizer) in any of six user specified units. The rugged corrosion resistant body for the most demanding applications
is easy to install with consistent accuracy up to ± 0.2%. It is battery powered with LCD display.
Features:
• 1" FNPT ports.
• 2-20 gpm with +/-0.2% accuracy.
• Fluorocarbon seals.
• Pressure to 125 psi max.
• Two alkaline AA batteries included.
• -10° F. - 130° F. temperature range.
• Compatible with pesticides, fertilizers, water, crop oil,
• 360° positioning display.
gear oil, motor oil, diesel fuel, mineral spirits, ethylene
• Quick, one step calibration.
glycol, mild acids, soaps, detergents, diesel exhaust
• Waterproof, corrosion-resistant.
fluid and more.
• Glass filled polypropylene housing.
The 850 positive displacement nutating disc meter is ideal for end of hose use, in line or mounted to a pump. It is able to store and display
the current flow amount (total) or the cumulative flow amount (totalizer) in any of six user-specified units. The 850 has a mass air sensor
that distinguishes between fluid and air. That means the 850 stops metering when you've finished emptying a container, adding an extra
degree of accuracy. The rugged corrosion-resistant body for the most demanding applications is easy to install with consistent accuracy
up to +/- 0.2%. Battery powered, LCD display.
Features:
• LCD display.
• 2-20 gpm with +/-0.2% accuracy.
• Waterproof, corrosion resistant.
• Pressure to 120 psi max.
• Fluorocarbon seals.
• Mass air sensor.
• Glass filled polypropylene housing.
• 1" FNPT ports.
• Compatible with pesticides, fertilizers, water, crop oil,
• -10° F.-130° F. temperature range.
gear oil, motor oil, diesel fuel, mineral spirits, ethylene
• 360° positioning display.
glycol, mild acids, soaps, detergents, diesel exhaust
• Two alkaline AA batteries included.
fluid and more.
• Quick, one step calibration.
PART NUMBER
825
850
316
DESCRIPTION
METER-HERBICIDE DIGITAL 1" FPT 2-20 GPM
METER-1" W/MASS AIR SENSOR 2-20 GPM
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Meters
Water and Chemical Flow Meters
Banjo
•
•
•
•
•
•
•
•
•
•
•
Easy to change six AA batteries.
No moving parts to fail during use.
Glass reinforced polypropylene.
Temperature range from 0º F. to 150º F.
Accuracy is 99% from 2-110 gpm for 1".
Accuracy is 99% from 6-300 gpm for 2".
Accuracy is 99% from 14-670 gpm for 3".
There are three photo eyes located on the face of the
flowmeter.
NOTE: It is recommended to have at least 10x the diameter of straight pipe before and after the flow meter.
PART NUMBER
MFM100
MFM220
MFM300
DESCRIPTION
METER-FLOW 1" FP MFLD 2-110 GPM
METER-FLOW 2" FP MFLD 6-300 GPM
METER-FLOW 3" FP MFLD 14-670 GPM
Dura Products
•
•
•
•
•
•
•
PART NUMBER
DP-3000V
Flow rate: 2-22 gpm
Accuracy: ± .5%
Operating temperature from -10º F.
to 130º F.
Maximum pressure: 40 psi
Impact resistant Lexan™ faceplate
100% moisture sealed circuitry
Menu driven backlit display
•
•
•
•
•
2 year maintenance program
Plumbed for in-line and 90º
applications
Viton seals
Supported by a Quick List
reference chart
Uses 4 AAA batteries
DESCRIPTION
FLOWMETER-ELECTRONIC MOISTURE SEALED VITON
www.feiinc.com
317
Fertilizer - Liquid
•
•
•
Displays overall total volume and batch total volume.
Flow rate allows for gallons or liters per minute.
The display reads six digits for rate, eight digits for
total and one decimal place.
Magnetic style meter with stainless steel electrodes.
Self-calibrating meter.
Measures water and most conductive liquids (will not
read petroleum based liquids).
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Meters
Liquid Fertilizer Flow Meters
Great Plains Industries
120000-1 electronic meter FM-300H-G8N is the most accurate and versatile agricultural chemical meter on the market. The nutating disc
meter with electronic display is factory calibrated for thin and medium to thick fluids, even oil. Factory calibration is ± 2% and field
calibration is ± 0.5%. It has a flow range of 2-20 gpm (7-75 L/min.) and is constructed of corrosion resistant, durable PBT polyester. It
features six digit resettable batch and non-resettable cumulative totalizers. This meter is easy to install and use at the discharge end of
the hose. It is easy to disassemble, clean and maintain. It is powered by a field replaceable 9 Volt battery.
Fertilizer - Liquid
PART NUMBER
120000-1
DESCRIPTION
METER-HERBICIDE/CHEMICAL FM-300H-G8N
Raven
063-0173-653 FlowMax 221 is designed exclusively for stationary fluid transfer. Raven’s FlowMax fluid transfer systems make it simple
and convenient to monitor product flow from the nurse truck to your sprayer. The digital display is easy to view and the controls are on the
meter itself, which is right where you need it.
Features:
• Flanged 2" plumbing (M220).
• Mounts in-line to monitor flow rate with maximum
precision.
• Weather resistant enclosure.
•
Self-contained
digital display shows flow rate and
• Simple setup and operation.
totals.
• Replaceable 3.6 volt long-life battery.
• 200 gpm maximum.
• Records three separate total volumes.
•
Self-contained, no other consoles, cables or flow
• Displays rate of flow in U.S. or metric.
meters needed.
PART NUMBER
063-0173-653
318
DESCRIPTION
MONITOR-FLOW MAX 221 ASSY 200 GPM
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Electric Motors
Single Phase
Sturdy steel frame with integral steel base for rigidity in NEMA 182T and larger. Cast aluminum
endplates assure longer bearing life. Generous size, conduit box – rotatable through 90º
increments. High pressure ventilation – high volume – internal baffle assures uniform air
distribution for cooler operating temperatures. Ball bearings – locked shaft end-mount in any
position. Lubrication fittings provided, with relief. High efficiency design, torques exceed NEMA
standards. Copper windings, CSA approved. 1.15 service factor.
PART NUMBER
2NLE6
L5020
L3608T
BEM51-182CZ
L3710T
L3709T
L1511T
DESCRIPTION
MOTOR-1.5 HP 1PH 1725 RPM 56C 5/8" XP 52LBS
MOTOR-5HP 1PH 1725 RPM 215T 1-1/8" XP 164LBS
MOTOR-5HP 1PH 3600 RPM 184T 1-1/8" TEFC 88LBS
MOTOR-ELEC 5HP 1PH 3450 RPM
MOTOR-7.5HP 1PH 1800 RPM 215T 1-3/8" TEFC 141LBS
MOTOR-7.5HP 1PH 3600 RPM 213T 1-3/8" TEFC 123LBS
MOTOR-10HP 1PH 3600 RPM 215T 1-3/8"
Three Phase
PART NUMBER
EM7042T
EM7026T
EM3615T
EM3710T
EM3616T
EM3711T
EM2394T
EM7054T
DESCRIPTION
MOTOR-3HP 3PH 1725 RPM 182T 1-1/8" XP 70LBS
MOTOR-3HP 3PH 3600 RPM 182T 1-1/8" XP 67LBS
MOTOR-5HP 3PH 1800 RPM 184T 1-1/8" TEFC 75LBS
MOTOR-7.5HP 3PH 1800 RPM 213T 1-3/8" TEFC 116LBS
MOTOR-7.5HP 3PH 3600 RPM 184T 1-1/8" TEFC 88LBS
MOTOR-10HP 3PH 3600 RPM 215T 1-3/8" TEFC 121LBS
MOTOR-15HP 3PH TEFC 3520 RPM
MOTOR-15HP 3PH 1760 RPM 254T 1-5/8" XP 319LBS
www.feiinc.com
319
Fertilizer - Liquid
Sturdy steel frame with integral steel base for rigidity in NEMA 182T and larger. Cast aluminum
endplates assure longer bearing life. Generous size, conduit box – rotatable through 90º
increments. High pressure ventilation – high volume – internal baffle assures uniform air
distribution for cooler operating temperatures. Ball bearings – locked shaft end-mount in any
position. Lubrication fittings provided, with relief. High efficiency design, torques exceed NEMA
standards. Copper windings, CSA approved. 1.15 service factor.
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
John Blue Piston Pumps
Fertilizer - Liquid
Pump Units
PART NUMBER
NGP-4055-F
NGP-5655-ARF
NGP-6055
NGP-6055-S
NGP-6055-U
NGP-7055
NGP-7055-S
NGP-7058
NGP-8055-AR
NG-8055-ARF
NGP-8055-DR
NGP-9055-US
320
DESCRIPTION
PUMP-PISTON SINGLE 10.2 GPM
PUMP-PISTON DUAL 10.2 OR 21 GPM FLANGED
PUMP-PISTON SINGLE 21 GPM WITHOUT CLUTCH
PUMP-PISTON SINGLE 21GPM SS W/O CLUTCH
PUMP-PISTON SINGLE 21GPM W/O CLUTCH FUMIGANT
PUMP-PISTON SINGLE 34.2 GPM WITHOUT CLUTCH
PUMP-PISTON SINGLE 34.2 GPM SS W/O CLUTCH
PUMP-SINGLE PISTON 34.2 GPM W/ ELEC CLUTCH
PUMP-PISTON DUAL 42 GPM ADJ
PUMP-DOUBLE PISTON/FLANGED
PUMP-PISTON DUAL 42 GPM WITHOUT CLUTCH
PUMP-PISTON DUAL 68.4 GPM SS VITON SEALED
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
John Blue Piston Pumps
Pump Units
Repair Kits - NGP Pumps
There's a CDS-John Blue Next Generation Piston
Pumps (NGP) to meet all your precision application
needs. When it comes to chemical and fertilizer
injection, our ground driven and variable rate
metering pumps have a reputation and history built
on superior performance, serviceability and overall
quality.
All CDS-John Blue Piston Pumps have been
engineered and extensively field tested to achieve
the perfect liquid metering pump. In addition, any
CDS-John Blue Piston Pump, regardless of age, can
be hydraulically driven with our Variable Rate
Hydraulic Kit or with our Ground Driven Universal
Drive Assembly. Plus we have just recently
introduced the new Direct Hydraulic Drive for Piston
Pumps, a lower cost, more compact solution for
variable rate piston pump drives.
Fertilizer - Liquid
PART NUMBER
116134
115788
115788-S
115688
115688-S
115789
DESCRIPTION
KIT-GASKET NGP4055 SERIES
KIT-GASKET NGP6050 SERIES
KIT-GASKET SS NGP6050 SERIES
KIT-GASKET NGP7050 SERIES
KIT-GASKET SS NGP7050 SERIES
KIT-GASKET NGP8050 SERIES
www.feiinc.com
321
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
John Blue Piston Pumps
Pump Drives
Fertilizer - Liquid
CDS-John Blue Company ground driven pumps have proven they are the most reliable and accurate method of applying liquid fertilizer
without exception. Now you can bolt it up quickly and easily!
Features:
• High and low application rates.
• Push or pull.
• Fits all current CDS-John Blue pumps.
• Fits 7" x 7", 6" x 6", 6" x 4" and 4" x 4" bars.
• Universal adjustable idlers, push or pull.
• Interchangeable jackshaft sprockets: RC-50-24 and 18
tooth for low and high ranges.
• Ground wheel sprocket: RC-50, 50 tooth.
•
•
•
•
•
Mounting nuts and washers are included.
Adjustable to fit your bar height.
Bottom of bar to ground using 13.5" loaded radius tire:
minimum 17", maximum 31".
Wide pivot angle.
Bottom of bar to axle centerline: Minimum 3.5",
Maximum 17.5".
VRH-JD-15 Multi-Section Variable Rate Hydraulic Drive Kit for John Deere CANbus Planters using GreenStar™ GS2 and GS3. Kit includes:
bar mounting bracket, chain, sprockets, hydraulic motor, PWM flow control manifold, custom adaptor harness to control up to 7 section
valves and setup instructions with parts listing for obtaining off-the-shelf components to complete installation. Other applications may
work, but CANbus wiring must be present.
VRH-PWM-10 Variable Rate Hydraulic Drive Kit for Raven, Ag Leader, Trimble and other systems that can control a PWM valve. Motor has
manifold with PWM valve and Raven-type plug. Kit includes: bar mounting bracket, chain, sprockets, hydraulic motor, PWM flow control
manifold and setup instructions.
PART NUMBER
115672
DRV-3000
DRV-3200
DRV-3300
VRH-JD-10
VRH-PWM-10
322
DESCRIPTION
KIT-NGP ELEC CLUTCH
DRIVE-GROUND PUMP MOUNT FIXED HEIGHT ADJUSTMENT W/MOUNT
MOUNT-UNIVERSAL FOR PLANTER HEX SHAFT DRIVE W/JACKSHAFT
DRIVE-GROUND SPRING LOADED ADJ MECHANISM W/MOUNT
KIT-HYDR DRIVE JOHN DEERE GS2/3
KIT-DRIVE VARIABLE RATE UNIVERSAL
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
John Blue 12V Pumps
The CDS-John Blue 12-Volt Pump is the only 12-Volt pump on the market today totally protected against weather, dust and overspray, it is
weatherproof tested. Three models are available with capacities of 2.2, 3.6 and 4.8 gpm.
PART NUMBER
AP0819W
AP1219W
AP1816W
AP1819W
•
•
•
•
•
•
Chemical resistant construction suitable for most
fertilizers and chemicals.
Santoprene diaphragms and valves.
Viton seals.
Glass filled polypropylene housing.
Strainer is made from polycarbonate, 316 stainless
steel 50 mesh screen.
1-year unconditional warranty.
DESCRIPTION
PUMP-12V 2.2GPM 45 PSI 1/2" NPT
PUMP-12V 3.6GPM 45 PSI 1/2" MPT
PUMP-12V 4.8GPM 45 PSI QUICK W/STRAINER
PUMP-12V 4.8GPM 45 PSI 1/2" MPT
12V Speed Controllers
The CDS-John Blue 12 Volt speed controller controls motor speed on any 12 volt pump to vary output. It
provides accuracy over a wide range of RPMs and is generally used for low volume starter fertilizer on drills
and planters.
PART NUMBER
AKSC10-05
AKSC35-00
AKSC35-01
AKSC35-05
AKSC35-206
AKSC-202
AKSCP-001
DESCRIPTION
CONTROLLER-12V 10 AMP W/O GAUGE
CONTROLLER-12V 35 AMP W/WIRING KIT W/O GAUGE
CONTROLLER-35 AMP W/WIRING, PLUMBING KIT & SS GAUGE
CONTROLLER-12V 35 AMP W/O GAUGE
CONTROLLER-35 AMP GAUGE ONLY
CONTROLLER-KIT 35 AMP WITH DIGITAL GAUGE
KIT-CONTROLLER WIRING
www.feiinc.com
323
Fertilizer - Liquid
Features:
• Weatherproof teste, the only 12 Volt pump to be totally
protected against weather, dust and overspray.
• Four piston diaphragm for a smoother flow.
• Quick connect ports system means it is faster to
install, requires fewer parts and connections while
reducing the number of potential leak points.
• Integral pressure switch is fully sealed.
• Low current draw results in a longer battery life.
• Maximum operating pressure of 45 psi.
• Automatic demand.
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
DEF Pumps and Accessories
Fertilizer - Liquid
DEF Pumps
Dura-Pump™ DEF Portable Tote
• Caddy pumping system with top suction.
• 135 gallon DEF tote.
• 12 volt or 110 volt DC motor.
• 6" dual bung vented lid.
• MicroMatic RPV valve.
•
•
•
•
3.25" x 20' DEF discharge hose.
Choice of manual or automatic nozzle.
ISO22241-3 compliant.
Dura-Meter™ DEF meter optional.
GPI NPT hand pump with dip tube 129001-1 is designed to fit tanks or 55 gallon barrels with 2" NPT threads. This design eliminates side
load, shaft binding, or seal leakage seen in other lever pumps. Rugged construction of Acetal and ABS. Polypropylene and Viton® wetted
parts for fluid compatibility. Adjustable suction pipe included. Use for water, petroleum products, agricultural chemicals, and diesel exhaust
fluid (DEF). DO NOT USE WITH kerosene, Roundup® concentrate, or flammable fluids. 90 day warranty.
PART NUMBER
DEFE-2512ME
DEFE-2515ME
129001-1
324
DESCRIPTION
KIT-DEF CADDY 12V TOP MOUNT
KIT-DEF CADDY 110V TOP WITHDRAWAL
PUMP-HAND SINGLE ACTION PISTON HERBICIDE W/PIPE LP-50H
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
NOTES
Fertilizer - Liquid
www.feiinc.com
325
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Shurflo Pumps
12V Pump Units
Fertilizer - Liquid
Model 2088 Pumps - The high performance SHURflo 2088 series diaphragm pumps deliver reliable performance in high flow, moderate
pressure applications. They are used in a variety of spot spraying, multi-tip spraying and fertilizer drip applications that require flows up to
3.6 gpm. They feature polyethylene housing, 45 psi with 1/2" ports.
Features:
• For high volume fluid transfer applications.
• Designed for heavy duty spraying applications.
• Self-priming to 12' vertical lift.
• Can be run dry without damage.
•
•
•
•
Viton valves.
Stanoprene diaphragm.
Prevents back flow into solution tank.
Available in a variety of chemical resistant materials.
Model 5059 Pumps - The field proven SHURflo 5.3 gpm pump is driven by a 12 Volt sealed motor and delivers 3.8 gpm at 40 psi with
current draw of 14 amps. This pump is designed with a Santoprene diaphragm for chemical resistance and maximum life, as well as Viton
valves for maximum chemical resistance. A built-in pressure switch on automatic demand versions set at 60 psi, bypass versions set at 90
psi, which protects the pump in the event of dead-heading. The pump is available in the same footprint as other SHURflo pumps, allowing
users to upgrade to a higher performance on existing installations.
Features:
• Field proven pump head design.
• Automatic demand.
•
•
Self-priming up to 8 feet.
1/2" NPTF ports.
Model 8000 Pumps – These diaphragm pumps are ideal for the toughest industrial applications requiring high pressure with flow rates up
to 1.8 GPM, 150 psi and low amp draw. Available with spherically shaped valves in a wide variety of elastomers, the 8000 Series can
accommodate a broad spectrum of chemical products. They have an automatic demand switch and deliver consistent, dependable
operation and priming. Count on the compact 8000 and the complete line of SHURflo pumps for long life, unmatched reliability and
trouble-free performance.
Features:
• Self-priming up to 8 vertical feet.
• Chemical resistant materials.
• Heavy duty spraying and fluid transfer applications.
326
•
•
www.feiinc.com
Can run dry without damage.
Built-in check valve.
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Shurflo Pumps
12V Pump Units
Models 4111-035 and 4211-035 take all the performance and features of the time tested 2088 series, double it, and the result is the high
flow Power Twin. It delivers an open flow of 6.25 gpm at a mere 9.8 amps. At 40 psi it delivers 3.5 gpm and draws only 17.2 amps. One of
the most efficient high flow self-priming pumps available today, it is excellent for transferring, spraying, and use as a 1:1 proportioning
pump.
Features:
• Long life pressure switch.
• Santoprene diaphragm with Viton valves.
• Thermally protected motor with heat sink.
1/2" MPT ports.
Quiet balanced operation.
Intake/discharge manifold optional.
DESCRIPTION
PUMP-12V 3.6 GPM 45 PSI 1/2" MPT FIN COOLED VITON
PUMP-12V 3.0 GPM 45 PSI 1/2" MPT PORTS VITON VALVES
PUMP-12V 3.3 GPM NO DEMAND SWITCH 1/2" MPT VITON VALVES
PUMP-12V 3.5 GPM 45 PSI 1/2" MPT PORTS SANTOPRENE VALVES
PUMP-12V 4.0 GPM 45 PSI 1/2" MPT PORTS
PUMP-12V 5.3 GPM 60 PSI DEMAND 1/2" FPT VITON
PUMP-12V 5.3 GPM 60 PSI DEMAND 1/2" MPT VITON
PUMP-12V 5.3 GPM 90 PSI BYPASS 1/2" FPT
PUMP-12V 1.2 GPM VITON 60 PSI DEMAND SWITCH 3/8" FPT
PUMP-12V 1.2 GPM 45 PSI BYPASS
PUMP-12V 1.8 GPM 60 PSI DEMAND 1/2" MPT VITON VALVES
PUMP-12V 1.4 GPM VITON VAL 60 PSI DEMAND SWITCH 3/8"FPT
PUMP-12V 1.4 GPM INTERNAL BYPASS 45 PSI VITON 3/8"FPT
PUMP-12V 1.8 GPM 1/4" EXTERNAL BYPASS 3/8" FPT VITON VALVES
PUMP-1.4 GPM BYPASS W/REVERSED PUMPHEAD VITON VALVES FM1400
PUMP-12V 1.8 GPM 60 PSI DEMAND ON/OFF SWITCH 3/8" FPT
PUMP-POWERTWIN 12V 6.25 GPM SEALED SW W/MANIFOLD
PUMP-POWERTWIN 12V 6.25 GPM W/O MANIFOLD S-SW
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
2088-313-145
2088-343-135
2088-343-500
2088-443-144
2088-514-144
5059-1310-D011
5059-1311-D011
5059-3610-D011
8000-343-236
8000-541-250
8000-543-136
8000-543-236
8000-543-250
8000-543-290
8006-543-250
8007-593-836
4111-035
4211-035
•
•
•
327
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Shurflo Pumps
115V AC Pump Units
Model 2088 115 VAC – Used in a variety of spot spraying, mini-bulk transfer and fertilizer applications that require flows of up to 3.2
gpm. Available in a variety of chemical resistant materials and a corded model is available. Self-priming up to 12 vertical feet with
automatic demand and can run dry without damage. Built-in check valve (may vary by model) prevents back flow of fluid into the solution
tank.
Fertilizer - Liquid
Model 8020 115 VAC – Ideal in agricultural applications that require high pressure with flow rates up to 1.6 gpm and low amp draw. Can
be mounted in any position, compact design for easy maintenance. The 8020 is self-priming up to 8 vertical feet and has a built-in check
valve. Constructed of chemical resistant material and able to run dry without causing damage.
PART NUMBER
2088-394-144
2088-394-154
2088-594-500
8020-503-250
8020-513-236
8020-833-238
DESCRIPTION
PUMP-115V 3 GPM 45 PSI DEMAND 1/2" MPT 6FT POWER CORD
PUMP-115V 3.2 GPM 50 PSI 1/2" MPT PORTS VITON VALVES
PUMP-115V 3.3 GPM 50 PSI 1/2" MPT PORTS SANTO VALVES NO CTRL
PUMP-115 VAC 1.4 GPM 3/8"FPT POWER CORD 45PSIBYPASS 3/8"FPT
PUMP-115 VAC 1.4 GPM 3/8"FPT 60 PSI SWITCH-POWER CORD 3/8"F
PUMP-115 VAC 1.4 GPM 3/8"FPT GPM-VITON VALVES 3/8"FPT PORTS
Shurflo Repair Kits and Accessories
Accessories
Swivel wing nut adapter fittings for SHURflo pumps are constructed of polypropylene. Twist-on strainers 170-060-09 and 170-061-09 will
protect the pump from filtering dirt and other foreign particles often found in tanks used in agricultural spraying. Twist-on mount, directly
on the pump head using integral molded-in threads. The transparent design makes it easy to see when it is time to clean out the strainer.
PART NUMBER
8-162-01
8-161-01
8-154-01
8-156-01
8-159-01
8-158-01
8-155-01
8-157-01
170-060-09
170-061-09
328
DESCRIPTION
FITTING-1/2" FPT X 3/8" BARB STRAIGHT W/WING NUT SWIVEL
FITTING-1/2" FPT X 1/2" BARB STRAIGHT W/WING NUT SWIVEL
FITTING-1/2" FPT X 5/8" BARB STRAIGHT W/WING NUT SWIVEL
FITTING-1/2" FPT X 3/4" BARB STRAIGHT W/WING NUT SWIVEL
FITTING-1/2" FPT X 3/8" BARB ELBOW W/WING NUT SWIVEL
FITTING-1/2" FPT X 1/2" BARB ELBOW W/WING NUT SWIVEL
FITTING-1/2" FPT X 5/8" BARB ELBOW W/WING NUT SWIVEL
FITTING-1/2" FPT X 3/4" BARB ELBOW W/WING NUT SWIVEL
STRAINER-1/2" HB TWIST ON CONNECTOR
STRAINER-1/2" MPT TWIST ON CONNECTOR
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Hypro Pumps
Centrifugal Pumps
Centrifugal - Cast Iron
PART NUMBER
9028C-O
9202C
9203C
9203C-R
9205C
9206C
9302C-HM1C
9303C-HM1C
9303C-HM1C-U
9303C-HM2C
9303C-HM3C
9303C-HM4C
9303C-HM5C
9306C-HM1C
9306C-HM1C-U
9306C-HM3C
9306C-HM5C
9306S-HM5C-U
DESCRIPTION
PUMP-CI 110 GPM GEARDRIVE 1000 PTO 20 SPLINE 1-1/2" X 1-1/4"
PUMP-CI 103 GPM PEDESTAL 1-1/4" IN X 1" OUT 5/8" SHAFT
PUMP-CI 140 GPM PEDESTL 1-1/2" IN X 1-1/4" OUT 5/8" SHAFT
PUMP-CI 140 GPM PEDESTAL CW ROTATION 1-1/2" X 1-1/4"
PUMP-CI 180 GPM PEDESTAL 2" IN X 1-1/2" OUT 7/8" SHAFT
PUMP-CI 225 GPM PEDESTAL 2" IN X 1-1/2" OUT 5/8" SHAFT
PUMP-CENTRI HYDR CI 72GPM 150 PSI 1-1/4" IN 1" OUT OPEN/CLOS
PUMP-CENTRI HYDR CI 114GPM 130 PSI 1-1/2" IN 1-1/4" OUT OP/CL
PUMP-CENTRI HYDR CI 114GPM 130 PSI 1-1/2" IN 1-1/4" OUT OP/CL
PUMP-CENTRI HYDR CI 97GPM 95 PSI 1-1/2" IN 1-1/4" OUT CLOSE
PUMP-CENTRI HYDR CI 125GPM 98 PSI 1-1/2" IN 1-1/4" OUT LG OP
PUMP-CENTRI HYDR CI 115GPM 93 PSI 1-1/2" IN 1-1/4" OUT OP/CL
PUMP-CENTRI HYDR CI 147GPM 145 PSI 1-1/2" IN 1-1/4" OUT OP/CL
PUMP-CENTRI HYDR CI 207GPM 130 PSI 2" IN 1-1/2" OUT OPEN/CLOS
PUMP-CENTRI HYDR CI 207GPM 130 PSI 2" IN 1-1/2" OUT OP/CL FLG
PUMP-CENTRI HYDR CI 214 GPM 130PSI 2"IN 1-1/2"OUT OPN/CLO
PUMP-CENTRI HYDR CI 212GPM 140 PSI 2" IN 1-1/2" OUT OPN/CLOSE
PUMP-CENTRI HYDR SS 312GPM 140 PSI 2" IN 1-1/2" OUT OP/CL FLG
www.feiinc.com
329
Fertilizer - Liquid
Non-Positive Displacement Pumps for Lower Pressure Spraying of Abrasive and Corrosive Materials. Hypro centrifugal pumps
deliver high volume reliability for today’s larger ag spraying systems requiring up to 136 GPM or 180 PSI. This broad, versatile line includes
models with rugged housing of cast iron and polypropylene. The pump features gear drive, belt and pulley drive or a powerful hydraulic
motor drive for closed center (load sensing or pressure compensating type) and open center systems. Whatever the spraying system
requirements, there is a Hypro Made in the USA, centrifugal pump with the capacity, efficiency and drive to do the job.
Features:
• Balanced, glass filled nylon or polypropylene impeller
• Corrosive, abrasive and general use chemical
for excellent corrosion resistance and continuously
compatibility.
smooth operation.
• Handles a broad spectrum of solutions from liquid
• Standard seals are Viton; Buna-N seals are available.
fertilizer to agricultural chemicals to wettable powders.
• Pump shaft rotation: Counter clockwise when looking
• Compact for easier out of the way mounting.
at the shaft end.
• Hydraulic motor equipped with special double lip
Teflon seals for superior sealing and longer life
expectancy.
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Hypro Pumps
Centrifugal Pumps
Centrifugal - Stainless Steel
9300 series stainless steel high performance centrifugal pumps are designed for high efficiency,
resulting in higher flow at working pressure. The Life Guard silicon carbide seal comes standard.
9300 series is available with universal flanged ports (300 x 220 or 220 x 220) for quicker
installation and serviceability. The most robust hydraulic motor in the crop spraying industry
significantly reduces downtime and increases spraying days.
PART NUMBER
9306S-HM1C
9303S-HM1C
9303S-HM2C
DESCRIPTION
PUMP-CENTRI HYDR SS 207GPM 130PSI 2" IN 1-1/2" OUT OPN/CL
PUMP ASSY-1-1/2" INLET X 1-1/4" OUTLET
PUMP-CENTRI HYDR SS 97GPM 95 PSI 1-1/2" IN 1-1/4" OUT CLOSE
Fertilizer - Liquid
Centrifugal - Poly
9303P series hydraulically driven, polypropylene centrifugal pumps achieves up to 80-113 gpm and 85-125 psi (5.9-8.6 bar). The
hydraulic motor drive (for open center, closed center and load-sensing systems) with port sizes of 1-1/2" NPT inlet, 1-1/4" NPT outlet. The
pump seals come Viton/ceramic standard (Life Guard silicon carbide and Buna-N ceramic available). It has an internal gear gerotor motor
with a capacity of 5-20 gpm and continuous duty 3000 psi. It utilizes a double lip PTFE hydraulic motor seal with 1/2" NPT inlet, 3/4" NPT
outlet ports.
The 9940-9700NRL series pumps are specifically designed for bulk transfer of fertilizer and agricultural chemicals. The pumps have
centrifugal force impellers for quiet, efficient pumping action. The 9940-9700NRL centrifugal pumps feature Noryl impeller and housing,
which provide a wide range of corrosion resistance. These pumps have chemical resistant, coated, cast iron bearing housing,
Viton/Ceramic with polypropylene case shaft seals and port sizes of 1-1/2" NPT inlet, 1-1/2" NPT outlet.
PART NUMBER
9303P-HM1C
9303P-HM4C
9940-9750NRL
9940-9751NRL
9940-9753NRL
330
DESCRIPTION
PUMP-POLY 110 GPM HYDR 1-1/2" IN X 1-1/4" OUT
PUMP-POLY 82 GPM HYDR 1-1/2" IN X 1-1/4" OUT
PUMP ONLY-1-1/2" X 1-1/2" PEDESTAL MOUNT 5/8" SHAFT
PUMP-NORYL AC MOTOR 115V 3/4 HP 1-1/2" X 1-1/2"
PUMP-NORYL AC MOTOR 115V 1.5 HP 1-1/2" X 1-1/2"
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Hypro Pumps
Transfer Pumps
Transfer - Poly
•
•
•
5 vane impeller can handle solid particles in
suspension up to 3/8" diameter.
Self-priming capabilities with maximum suction lift up
to 25 feet.
EPDM mechanical seal and inlet valve for longevity
and reliability in most applications.
With the 1543P series you can achieve the highest performance available in a 3" poly transfer pump (up to 484 GPM / 1832 LPM) with the
highest efficiency and horsepower on the market. Ideal for nurse tank transfer and other closed system applications. The polypropylene
housing and EPDM elastomers protect the pump from most chemicals and corrosive environments.
Features:
• Gas engine mount, pedestal mount or hydraulic drive
• Housing: 3" x 3" polypropylene.
options available.
• EPDM mechanical pump seals.
• Gas engine driven versions powered by field proven 13
• Suction lift of 25 feet.
HP Hypro PowerPro™ engine or Honda GX390 (EPA
• Polypropylene impeller with stainless steel insert.
and CARB certified).
PART NUMBER
1542P-65SP
1542P-65SPM
1543P-130ESP
1543P-130SP
1543P-390EHSP
DESCRIPTION
PUMP-2" POLY 6.5HP 5 VANE IMPELLOR-POWER PRO ENGINE
PUMP ASSY-5 VANE 65HP GE 2" W/CAGE
PUMP-3" POLY 13 HP ELEC START POWER PRO ENGINE
PUMP-3" POLY 13 HP ROPE PULL POWER PRO ENGINE
PUMP-3" POLY 13HP HONDA ENGINE ELEC START
www.feiinc.com
331
Fertilizer - Liquid
1542P-5SP Transfer Pump
• Polypropylene housing is suitable for corrosive
environments.
• 6.5 hp PowerPro™ engine with overhead valve.
• Low oil sensor prevents engine seizing when oil level
is too low.
• Easily handles high capacity liquid transfer jobs with
flow rates up to 200 gpm.
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Hypro Pumps
Transfer Pumps
Transfer - Cast Iron
Fertilizer - Liquid
Hypro 1537 gas engine driven centrifugal pump handles big, high capacity spraying jobs with ease. Use it for spraying liquid fertilizers and
other chemicals, including wettable powder slurries for weed control. Make short work of other jobs, filling nurse tanks, watering seed
beds, and transferring liquids. The broad, versatile line includes models with rugged housings of cast iron and stainless steel that stand up
to strong chemical herbicides. Stainless steel pumps are ideal for use with Roundup or other acid applications. It has a capacity of 110
gpm, 80 psi and 1-1/2" x 1-1/4" ports with a 5.5 HP Honda engine. Model 1538 is the pump, less engine.
Hypro 1550-SP centrifugal pump is 155 gpm, 135 psi with large 2" x 2" ports, 9 HP Honda engine and close coupled.
Hypro 1532C and 1533C series are high-powered, self-priming cast iron transfer pumps that are available in multiple configurations
including a 6.5 HP PowerPro™ gas engine drive. The 1532C has 2" x 2" ports, the 1533C has 3" x 3" ports. With flow rates up to 330
gpm and pressures up to 60 psi, these transfer pumps deliver solutions for your fluid and chemical transfer needs.
PART NUMBER
1537
1538
1550-SP
1532C-6SP
1533C-13ESP
DESCRIPTION
PUMP-CENTRIFUGAL 1-1/2-1-1/4 HONDA 5.5
PUMP-1-1/2"X 1-1/4"CENTRIF HYPRO LESS ENGINE
PUMP-CENTRIFUGAL 2" W/9 HP HONDA ENGINE
PUMP-CENTRIFUGAL POWERPRO 6.5 HP
PUMP-3" CI 13HP POWER PRO ELEC START
Aluminum Trash Pumps
FEATURES:
• PowerPro gas engine.
• Aluminum housing.
• EPDM mechanical seals.
• Suction lift - 23 ft./7.01M.
PART NUMBER
1543A-65TSP
332
DESCRIPTION
PUMP-TRASH 3" SAE W/6.5 HP POWERPRO - ALUM
www.feiinc.com
•
•
•
Trash pumps will handle 1-1/8" solids.
Self-priming.
Low oil sensor.
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Hypro Pumps
Roller Pumps
PART NUMBER
1502XL
1700C
1700C-R
1700XL
1700XL-R
6500C
6500C-R
6500N
6500XL-R
7560C
7560C-R
7560N
7560N-R
7560N-GM30
7560XL
7560XL-GM30
7560XL-R
7700C
7700C-R
7700N
DESCRIPTION
PUMP-6 ROLLER 1-1/2" PORT 62 GPM 200 PSI SILVERCAST
PUMP-5 ROLLER 1" PORT 45 GPM 200 PSI CI
PUMP-5 ROLLER 1" PORT 45 GPM CI REVERSE ROTATION
PUMP-5 ROLLER 1" PORT 45 GPM 200 PSI SILVERCAST
PUMP-5 ROLLER 1" PORT 45 GPM SILVERCAST REVERSE ROTATION
PUMP-6ROLLER 3/4" NPT PORT 21.8 GPM 300 PSI CI
PUMP-6ROLLER 3/4" NPT PORT 21.8 GPM 300 PSI CI REVERSE
PUMP-6ROLLER 3/4" NPT PORT 21.8 GPM 300 PSI NI-RESIST
PUMP-6ROLLER 3/4" NPT PORT 21.8 GPM 300 PSI SILVERCST REV
PUMP-8ROLLER 3/4" NPT PORT 22.5 GPM 300 PSI CI
PUMP-8ROLLER 3/4" NPT PORT 22.5 GPM 300 PSI CI REVERSE
PUMP-8ROLLER 3/4" NPT PORT 22.5 GPM 300 PSI NI-RESIST
PUMP-8ROLLER 3/4" NPT PORT 22.5 GPM 300 PSI NI-RES REVERS
PUMP-8 ROLLER 3/4" NPT PORT 20.1 GPM 300PSI NI-RESIST HYDR
PUMP-8ROLLER 3/4" NPT PORT 22.5 GPM 300 PSI SILVERCAST
PUMP-8ROLLER 3/4" NPT PORT 20.1 GPM 300 PSI SILVRCST HYDR
PUMP-8ROLLER 3/4" NPT PORT 22.5 GPM 300 PSI SILVERCST REV
PUMP-7ROLLER 3/4" NPT PORT 22.1 GPM 200 PSI CI
PUMP-7ROLLER 3/4" NPT PORT 22.1 GPM 200 PSI CI REVERSE
PUMP-7ROLLER 3/4" NPT PORT 22.1 GPM 200 PSI NI-RESIST
www.feiinc.com
333
Fertilizer - Liquid
Hypro roller pumps are known for their durability and long running capabilities, in fact, Hypro pumps last (on average) 2 1/2 times longer
than the competition. This is due, in part, to the pumps high ‘Brinel’ rating. Other pumps use a softer iron that cannot be finished as
smoothly and, consequently, these pumps wear out earlier. Models range from 4-8 rollers per pump and come standard with Hypro’s new
‘Super Roller’ material. The pumps operate efficiently at PTO speeds of 540 and 1000 rpm. Pressure ranges are up to 300 psi with flow
rates of 2-74 gpm. The pump should be run at maximum pressure for only short periods of time to prevent premature pump failure.
Features:
• Housing is available in cast iron, Ni-Resist or SilverCast. Ni-Resist is a high nickel content alloy for better corrosion resistance.
• SilverCast is a custom alloy that provides the best corrosion resistance when used with herbicides such as Roundup.
• Self-priming operation; DO NOT run dry.
• Easily adaptable to PTO or gas engine drives.
• Standard seals are Viton or Buna-N.
• Standard Super Rollers are made from a special combination of materials that provide the chemical resistance of nylon and the
life of polypropylene. Super Rollers are ideal for use with water soluble chemicals and emulsifiable concentrates. Super Rollers
should not be used with acidic fertilizer. Polypropylene and Teflon rollers are available.
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Hypro Pumps
Roller Pumps
Series 4001 and 4101
Fertilizer - Liquid
The 4001 series, 4-roller, pump achieves up to 9.1 gpm (34.4 lpm) and 150 psi (10.3 bar). The 4101 series, 4 roller, pump achieves up to
7 gpm (26.5 lpm) and 150 psi (10.3 bar).Super Rollers standard provide premium wear life with options available in poly and PTFE for
superior chemical resistance. Viton seals offer the best overall chemical resistance. Clockwise shaft rotation directly couples to gas
engines and electric motors. Counter-clockwise shaft rotation is available for PTO adaption. 5/8" solid stainless steel shaft resists
corrosion.
PART NUMBER
4001C
4001C-AR
4001N
4001XL-E2H
4001XL-EH
4101C
4101C-AR
4101C-H
4101N-EH
4101N-H
4101XL
4101XL-AH
4101XL-EH
334
DESCRIPTION
PUMP-4 ROLLER 3/4" PORT 9.1 GPM 150 PSI CI
PUMP-4 ROLLER 3/4" PORT 9.1 GPM CI REVERSE ROTATION
PUMP-4 ROLLER 3/4" PORT 9.1 GPM 150 PSI NI-RESIST
PUMP-4 ROLLER 3/4" PORT 9.9 GPM W/ELEC MOTOR SILVERCAST
PUMP-4 ROLLER 3/4" PORT 10.4 GPM W/ELEC MOTOR SILVERCAST
PUMP-4 ROLLER 3/4" PORT 7.2 GPM 150 PSI CI
PUMP-4 ROLLER 3/4" PORT 7.2 GPM CI REVERSE ROTATION
PUMP-4 ROLLER 3/4" PORT 7.2 GPM CI HOLLOW SHAFT 1/2"
PUMP-4 ROLLER 3/4" PORT 7.5 GPM W/ELEC MOTOR NI-RESIST
PUMP-4 ROLLER 3/4" PORT 7.2 GPM NI-RESIST HOLLOWSHAFT 1/2"
PUMP-4 ROLLER 3/4" PORT 7.2 GPM 150 PSI SILVERCAST
PUMP-4 ROLLER 3/4" PORT 7.2 GPM SILVERCST HOLLOWSHAFT 1/2"
PUMP-4 ROLLER 3/4" PORT 7.5 GPM W/ELEC MOTOR SILVERCAST
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Chemical Transfer Pumps
12 Volt Pumps
Great Planis Industries
The PH series plastic utility pump uses rotary gear design to produce delivery rates that make fluid transfer a quick
and efficient operation. The lightweight plastic housing and convenient carrying handle make this the most portable
pump family on the market. Durable plastic components ensure easy maintenance and a wide range of fluid
compatibility. Available with 2", 4", or cage mount connections. Recirculation is available on all models with 4" tank
connections. The P-200H incorporates additional gear reduction for medium and thick fluids while the P-120H is
ideal for thin fluids. Both guarantee maximum compatibility and versatility.
Fertilizer - Liquid
PART NUMBER
118000-1
118000-2
DESCRIPTION
PUMP-12V GEAR P120H 12 GPM
PUMP-12V GEAR P200H 8 GPM
www.feiinc.com
335
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Chemical Transfer Pumps
12 Volt Pumps
Sotera Systems
Fertilizer - Liquid
Unique dual diaphragm design easily handles viscous or high particulate fluids. There are few working parts for more working hours to
pump the toughest fluids and chemicals at up to 13 gpm with very low energy consumption. These 12 Volt UL listed pumps have ¼ HP
motors, heavy duty switch, thermal overload protection and junction box. Cast metal motor construction with spray coated pump
constructed of glass filled polypropylene.
PART NUMBER
415
435
336
DESCRIPTION
PUMP-12V DIAPHRAGM SS415B 13 GPM
PUMP-12V KIT W/FRAME, HOSE & METER SS435B 13 GPM
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
NOTES
Fertilizer - Liquid
www.feiinc.com
337
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Chemical Transfer Pumps
12 Volt Pumps
Flowserve
Fertilizer - Liquid
This DD6 diaphragm pump is designed to mount directly into the mini-bulk container. The DD6 will pump low to high viscosity liquids with
an internal recirculating feature for agitation capabilities. The discharge port configuration features a check valve to prevent chemical
container leakage as the motor discharge hose is designed to break away in the event of an accident. This pump includes a vent, rain
cover, mounting hardware and gasket. The flow rate is 7 to 9 gpm or 26 to 34 L/pm. Dip tubes must be ordered separately.
CADDY-PH6 with SEM-10 flow meter (as shown) - This PH6 configuration was designed for maximum flexibility, portability and ease in
handling for the user of multiple containers. Included in this portable system is the PH6 pump, the SEM-10 electronic flow meter, 1" (25
mm) x 12' (3.65 m) 2-braid, 4-ply EPDM discharge hose and a 1" (25mm) x 12' (3.65 m) 2-braid, 4-ply EPDM suction hose all mounted in
a tubular stand. The 1"
(25 mm) suction port is adaptable to most container fittings such as the Clean-Lock™, MicroMatic coupling system or a Cam Lock fitting.
CES-MTS-S this complete shuttle pumping system is ready to be mounted to a Monsanto shuttle tank. System includes: PH6 diaphragm
pump with 12 volt electric motor, 20' (6.10 m) power cable with alligator clips, SEM-10 electronic flow meter, coupling - 2" (50 mm) cam
lock with 90º street elbow and 1" (25 mm) NPT x 12' (3.65 m) EPDM discharge hose with ball valve.
CT6-3E5GA-000 is designed for compatibility with the entire range of crop chemical formulations and features a high flow rate of 13 gpm.
It is self-priming from a dry state, easy to service and is complete out of the box. Designed for vertical mount for use with drums or tank
lid.
The PH6-V Panther diaphragm transfer pump is engineered for use with low and high viscosity fluids. Designed to fit virtually any
container, the PH6 is the standard for many ag-chem mini-bulk systems. Capable of generating a maximum pressure of 1.7 bar (25 psi), it
is able to pump viscous chemicals even on the coldest mornings. Its 12-volt motor is engineered to produce a flow rate of 30 to 38 l/m (8
to 10 gpm) at 16°C (60°F) with a 30-minute duty cycle. For application flexibility, the PH6 may be vertically or horizontally mounted. It
offers flows to 10 gpm, pressures to 25 psi, temperatures to 130° F. and viscosities to 2500 cP (11 600 ssu).
PART NUMBER
DD-6
DD6
DD6-DRIVE
CADDY-PH6
CES-MTS-S
CT6-3E5GA-000
PH6-V
338
DESCRIPTION
MOTOR-ONLY-DD6 PUMP W/CABLE #DD6 MOTOR
PUMP ONLY-DD6 #DD6 PUMP/CKVLV 9 GPM
PUMP-PKG-DD6 PUMP/MOTOR/METER #DRIVE UNIT PKG-10
PUMP-12V KIT W/FRAME, HOSE & METER 10 GPM
PUMP-12V KIT W/METER & MONSANTO COUPLER 10 GPM
PUMP-12V KIT W/TOTE HANGER & METER 18 GPM
PUMP-12V PANTHER VITON 10 GPM
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Chemical Transfer Pumps
12 Volt Pumps
Flowserve
Fertilizer - Liquid
www.feiinc.com
339
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Chemical Transfer Pumps
12 Volt Pumps
Hypro
The stand-alone chemical transfer pump SF-1100 includes a 12 VDC motor, 20' cable with alligator
clips and an inline fuse. The pump does not include any tank couplings, ball valves or mounting
devices. The highly efficient design utilizes a 3" diameter permanent magnet motor, more
performance and less weight, without more cost. The pump delivers increased flow with viscous
micro-encapsulated or suspended chemicals. This high flow rate while pumping viscous chemicals,
in combination with free-flowing return loop, provides substantially increased turnover rate on
recirculation models. The proprietary designed co-molded diaphragm molecularly bonds the pump
piston to the diaphragm in the molding process. The result is an inherently leak-proof diaphragm
capable of years of trouble free service. While designed and tested to provide high performance and
years of durability, the SF-1100 is field serviceable with hand tools. It is also capable of priming up
to 12'.
Fertilizer - Liquid
PART NUMBER
SF-1100
SF-1100-H
DESCRIPTION
PUMP-CHEM DIAPHRAGM 12V
PUMP-CHEM DIAPHRAGM 12V W/HOSE & NOZZLE
Dura Products
Dura-ABS™ Auto-Batch System
•
•
•
Manual or automatic operation
High flow pump up to 15 gpm
Repeatable batching
•
•
•
Includes Dura-Meter™
12 volt, Viton
2 year warranty
NOTE: Tote tank shown is not included.
PART NUMBER
DPABS-4312V
DPEM-4312V
340
DESCRIPTION
PUMP-AUTO BATCH DURA 12 VOLT VITON
PUMP-EASY CADDY DURA 12 VOLT PUMP / METER VITON
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Chemical Transfer Pumps
115 Volt Pumps
Great Plains Industries
GPI 118003-1 model PA-120H-2UR and 1008003-2 model PA200H-2UR are 115 Volt AC plastic gear pumps
for thin fluids (0 to 10 centipoise viscosity) like herbicides, thin chemicals, agriculture chemicals and other
common herbicides. These pumps have a 30 minute duty cycle, automatic thermal protector, circuit breaker
and are CSA certified. There is a built-in handle with convenient spin collar for easy installation. Includes 2"
union ring.
118003-1 model PA-120H-2UR: 12 gpm flow rate with 2" inlet and outlet
118003-2 model PA-200H-2UR: 8 gpm flow rate with 1" inlet and outlet
PART NUMBER
118003-1
118003-2
DESCRIPTION
PUMP-115V GEAR PA-120H-2UR 12GPM
PUMP-115V GEAR PA-200H-2UR 8 GPM
Sotera Systems
Fertilizer - Liquid
Sotera 460 and 165 115 Volt AC electric diaphragm pump with reciprocating, spring driven configuration that maintains constant pressure
regardless of load. Pump automatically goes neutral when the end of hose valve is shut off. Glass-reinforced polypropylene pump housing
provides integrity and excellent material compatibility inside and out. These pumps feature 13 gpm at 15 psi Santoprene diaphragms,
EPDM elastomers, thermal overload protection, and a maximum temperature 130º F. The have suction lift of 10' and can handle solids up
to 0.1 diameter and include a shutoff ball valve.
460 – Model SS460B includes:
• 2" NPT bung adapter.
• 1" x 12' EPDM hose.
• Valve retainer.
• Telescoping polypropylene suction tube.
PART NUMBER
460
465
465 - Model SS465BX713 includes:
• Tubular frame assembly.
• Top and bottom of tote adapter kits.
• 1" x 9' EPDM hose.
• 1" x 12' EPDM hose.
DESCRIPTION
PUMP-115V W/HOSE & DIPTUBE 13 GPM
PUMP-115V KIT W/FRAME & HOSES 13 GPM
www.feiinc.com
341
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Chemical Transfer Pumps
115 Volt Pumps
Flowserve
CT6-4E5GA-000 and PH6110 Panther pump are 115 Volt diaphragm pumps for use with
water, crop oil, herbicides, insecticides, fungicides and fertilizer. They are not for use with
flammable liquids. These non-UL rated nylon transfer pumps are for low and high
viscosity liquids and feature a 30 minute duty cycle, flow rates of 8-10 gpm at 60º F. with
EPDM seals.
PART NUMBER
CT6-4E5GA-000
PH6110
DESCRIPTION
PUMP-METER 115V KIT W/TOTE HANGER & METER
18 GPM
PUMP-110V PANTHER 10 GPM
SHURflo
Fertilizer - Liquid
SHURflo SF-1100-110 is a stand-alone mini bulk chemical transfer pump that includes a 110 VAC motor with a
maximum of 2 AMPS and a 6' cable. Highly efficient design delivers increased flow with viscous micro-encapsulated or
suspended chemicals. High flow rate while pumping viscous chemicals in combination with free-flowing return loop
provides substantially increased turnover rate on recirculation models. More performance and less weight without
more cost.
PART NUMBER
DESCRIPTION
SF-1100-110V
PUMP-CHEMICAL TRANSFER 110V PUMP ONLY
Dura Products
Dura-ABS™ Auto-Batch System
•
•
•
Manual or automatic operation
High flow pump up to 15 gpm
Repeatable batching
•
•
•
Includes Dura-Meter™
110 volt, Viton
2 year warranty
NOTE: Tote tank shown is not included.
PART NUMBER
DPABS-4315V
342
DESCRIPTION
PUMP-AUTO BATCH DURA 110 VOLT VITON
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Chemical Transfer Pumps
Air and Hand Pumps
Flowserve
The HP-30 double pumping action ensures efficient product delivery on both the up and down stroke. The wetted parts are made of food
grade polypropylene and polyethylene. No friction design eliminates parts that wear or jam. An extender hose can be attached to the
outlet spout. The pump features an anti-pumping safety device and swiveling outlet spout
MP1Q-SS quart size metering hand pump’s standard system with Xtube, EPDM discharge hose, ball valve and spout with 2" male NPT
bottom suction 1" FPT side discharge port (Viton O-rings and gaskets) and telescopic suction pipe can extract the right amount of chemical
from the container by turning the handle clockwise to fill the measuring vessel to the exact measurement. Then turn in the opposite
direction to dispense the metered liquid. Visible volumetric pumping chamber accurately dispenses one quart per full stroke, adapts to
barrels, mini-bulk tanks, and drums, self-priming.
PART NUMBER
AP-30
HP-30
MP1Q-SS
DESCRIPTION
PUMP-AIR OPERATED TRANSFER 30 GPM
PUMP-HAND PLASTIC 30 GAL DRUM
PUMP-HAND METERING QUART STD SYSTEM
www.feiinc.com
343
Fertilizer - Liquid
The AP-30 is a multi-purpose pump for high capacity, low maintenance performance. It offers continuous duty pumping for many
agricultural chemicals, fuels and water. There is a minimum of moving parts for maximum durability. Now anondized for improved
corrosion protection. It has a capacity of up to 30 gpm. Versatile power sources: vehicle air compressor system, portable AC or DC air
compressor, or CO2 cylinder.
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Chemical Transfer Pumps
Air and Hand Pumps
Fertilizer - Liquid
Great Plains Industries
114000-2 Hand Pump HP-100C-2TC Features:
• Pumping rate to 30 gpm.
• Easy to change stroke setting. 2 quart setting for
faster pumping or 1 quart setting for greater ease in
pumping heavy fluids.
• Pumps a wide variety of products.
• Lightweight aluminum construction for corrosion
resistance.
• Fits any container with a 2" bung.
• Viton seals for handling most chemicals.
• Hardened steel handle designed to avoid pinching
hands while pumping.
•
•
•
•
•
Handle designed for a security lock to prevent theft.
Exclusive spin collar for easy pump installation.
Air valve in the pump body to prevent siphoning of
fluids.
Built-in nozzle holder to keep fluids clean and nozzle
convenient.
Supplied with 8' EPDM hose, thermoplastic nozzle,
40" adjustable suction pipe and bung adapter.
GPI LP-50H NPT hand pump with dip tube 129001-1 is designed to fit tanks or 55-gallon barrels with 2" NPT threads. This design
eliminates side load, shaft binding, or seal leakage seen in other lever pumps. Rugged construction of Acetal and ABS. Polypropylene and
Viton® wetted parts for fluid compatibility. Adjustable suction pipe included. Use for water, petroleum products, agricultural chemicals
and diesel exhaust fluid (DEF). DO NOT USE WITH kerosene, Roundup® Concentrate, or flammable fluids. 90 day warranty.
PART NUMBER
114000-2
129001-1
344
DESCRIPTION
PUMP-HAND HP100C
PUMP-HAND SINGLE ACTION PISTON HERBICIDE W/PIPE LP-50H
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Chemical Transfer Pumps
Accessories and Safety Equipment
Accessories
F0236 Anti-drip nozzle spout for Banjo nozzles.
F0237 Anti-drip nozzle spout for Norwesco nozzles.
UVA-100FP is a lightweight hose end valve for convenient transfer of liquids into drums, tanks, etc. It has an angled end flange with 8"
long polypropylene fill spout and all stainless steel bolts. Replacement nozzle available, order part number V-10161.
Dispensing nozzle VN-100 is glass reinforced polypropylene with 304 stainless steel handle, spring and pin for corrosion resistance. It has
FKM rubber parts only and a maximum psi rating of 75. Repair kit available, order part number VM-10200.
PART NUMBER
F6775
W169
CP24034-PP
116000-1
110094-8
110094-12
110094-1
F0236
F0237
110100-2
UVA-100FP
V-10161
VN-100
VN-10200
FITN-33
DESCRIPTION
VALVE-DRUM 3/4" PLASTIC FAUCET
WRENCH-BUNG
CONTAINER-CALIBRATION TEE-JET SPRAYER
CONTAINER-CALIBRATION 5 GAL
HOSE ASSY-1" X 8' EPDM CPLD MPT X MPT
HOSE ASSY-1" X 12' EPDM
HOSE ASSY-1" X 15' EPDM CPLD MPT X MPT
SPOUT-ANTI-DRIP NOZZLE
SPOUT-ANTI-DRIP NOZZLE
PIPE-15"-40" PLASTIC SUCTION ADJ
VALVE-1" SINGLE UNION POLY W/ANGLE HOSE END
NOZZLE-1" REPLACEMENT PIPE
VALVE-1" POLY NOZZLE
KIT-REPAIR 1" POLY NOZZLE
COUPLER-MONSANTO
www.feiinc.com
345
Fertilizer - Liquid
GPI calibration container 116000-1 is an accurate, durable, lightweight, low cost, molded container for use with any meter for calibration
purposes. Individually calibrated at the factory for maximum accuracy of ± 0.5%. Available in 5 gallon only, for noncommercial use only.
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Safety Equipment
Fertilizer - Liquid
Indirect vent safety goggles FE1000 have a clear frame and fit over prescription glasses and permits wide and ideal working vision. Has
indirect ventilation with splash proof, non-corrosive, plastic stack-trap vents in place of perforations for acid and splash conditions, OSHA
compliant.
Single dipped PVC coated gloves provide basic protection in light chemical applications. Glove lengths from knit wrist to 18" provide
different levels of protection. The FE1000-CHEM is an industry standard black single dipped, rough finish, interlock lined glove that is 12
inches in length.
FE2000 anhydrous ammonia gloves are black PVC plastic coated with a Jersey liner. They have an excellent wet or dry grip and come in a
14" length.
Yellow chemical gloves FE2100 are flock lined with a 12" length ideal for agricultural spraying requiring protection from chemicals, size
large.
730-11 chemical gloves are green nitrile compound. 13", 15 mil, flock lined, extra-large in size. These gloves are easily slipped on and off
so they can be used several times.
Medium duty rain suit 45250 is comprised of jacket with hood and overall. Both have extra full sizing and have electronically sealed
seams. The jacket is made of PVC on polyester. It has a corduroy collar, pockets, and vents, detachable hood included. The pants have an
adjustable set of suspenders.
Heavy duty rain suits 73242, 73243 and 73244 are made of strong PVC stretch fabric outer layer and provide an exceptional combination
of flexibility and worker comfort. The tough outer layer is bonded to a light weight liner that offers you warmth in cool weather and absorbs
perspiration during summer, without feeling clammy. These rain suits are resistant to oils, caustics, alcohols, oxidation and mildew and
can be laundered for extended wear. Superior cold flex material has greater cold flex, down to -30º F., than most other lined PVC
garments.
1428 disposable coverall is made of Dupont Tyvek material for durability, economy, and practicality. Full cut for comfort with full length
zipper and shirt collar, unique structure creates excellent barrier against acids and chemicals. Please specify size when ordering.
Protective Clothing Sizing Chart (Tyvek Coveralls)
346
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Chemical Transfer Pumps
Accessories and Safety Equipment
Safety Equipment
Fendall Porta Stream® Eyewash stations are portable, lightweight and deliver 6 minutes of uninterrupted, hands free flushing. Gravity
fed flow begins immediately when the nozzle pull strap is removed. Supplied with 70 oz. of Eyesaline® concentrate which, when mixed
with tap water provides 6 gallons of saline solution. Wall or mobile cart or stand mountable.
DESCRIPTION
GOGGLES-NH3 INDIRECT VENT #551
GLOVE-14"NATURAL RUBBER BES55 12 PKG
GLOVE-NH3 14" PVC COATED
GLOVE-CHEMICAL BESVM 12 PKG
GLOVE-13" GREEN LARGE CHEMICAL 12 PKG
GLOVE-13" GREEN XL CHEMICAL 12 PKG
GLOVE-13" GREEN XXL CHEMICAL 12 PKG
RAINSUIT-3 PIECE XL-MED DUTY S89-XL
RAINSUIT-3 PIECE L-HD 78017-L
RAINSUIT-3 PIECE XL-HD 78017-XL
RAINSUIT-3 PIECE XXL-HD 78017-2XL
COVERAL-WHITE TYVEK L
COVERAL-WHITE TYVEK XL
COVERAL-WHITE TYVEK XXL
COVERAL-WHITE TYVEK XXXL
STATION-EYEWASH 6 GAL
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
FE1000
FE1000-CHEM
FE2000
FE2100
730-09
730-10
730-11
45250
73242
73243
73244
1428L
1428XL
1428XXL
1428XXXL
32-000100-0000
347
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Banjo Transfer Pumps
Fertilizer - Liquid
2" Poly
2" Polypropylene Pump with Gas Engine Features:
• Precision molded construction.
• Lightweight.
• Corrosion resistant.
•
•
•
Superior design.
Low maintenance.
EPDM standard, FKM (viton type) available.
2" Polypropylene Transfer Pump Features:
• 160cc Honda GC engine.
• 4 stroke, OHC single cylinder.
• Horizontal shaft.
•
•
•
5 vane impeller.
190 gpm at 30 psi.
Precision molded poly pump with EPDM seals.
•
All internal fasteners are TFE coated stainless steel.
2" Polypropylene Wet Seal Pump – RUN DRY CAPABILITY!
2" Polypropylene Pump with Electric Motor Features:
• 1" drive unit spacer for additional protection.
• Available with elastomers are FKM (viton type).
2" Polypropylene Manifold Super Pump with Gas Engine – high performance impeller for a maximum flow of 255 gpm.
CAUTION-WARNING: Do not run pump dry, restrict or reduce port sizes, or deadhead pump. This could cause component failure to pump.
DO NOT USE WITH FLAMMMABLE LIQUIDS.
PART NUMBER
200-PB
200-PO
205-PO
200P-H5
205PH-5-GC-BAN
200PH-5E
200PBW
200PEO
200PH5W
200PH6
200P6PRO
348
DESCRIPTION
PUMP-2" POLY BEARING PDSTL 3/4" SHAFT & 3 VANE IMPELLER
PUMP-ONLY 2" POLY 3/4" SHAFT & 3 VANE IMPELLER
PUMP-2" POLY W/5-VANE IMPELLER
PUMP-2" POLY W/5.5 HONDA GAS ENGINE
PUMP-2" 4.5HP GC160 HONDA W/ 2" BANJO PUMP
PUMP-2" POLY 5HP HONDA ENGINE ELEC START
PUMP-2" POLY WET SEAL W/BEARING PED
PUMP-2" POLY W/C FACE ADAPTER
PUMP-2" POLY 5.5HP HONDA ENGINE WET SEAL
PUMP-2" POLY 6.5 HP HONDA MOTOR
PUMP-2" POLY 6.5HP BRIGGS 950 SERIES MOTOR
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Banjo Transfer Pumps
2" Poly
PART NUMBER
200P6PROE
200PHY
200PHYW
234PPE5
234PPE51
234PPE51-VA
234PPE51V
234PPE5V
M230P6PRO
M230P6PROW
M230PH6
M230PH6W
DESCRIPTION
PUMP-2" POLY 6.5HP BRIGGS ELEC START
PUMP-2" POLY 12HP HYDR DRIVEN 3600 RPM 6-10 HYDR FLOW
PUMP-2" POLY 12HP HYDR DRIVEN 3600 RPM WET SEAL
PUMP-2" POLY 5HP 3PH ELEC MOTOR EPDM SEALS
PUMP-2" POLY 5HP 1PH ELEC MOTOR
PUMP-2" POLY 5HP 1PH CHEM SERVICE
PUMP-2" POLY 5HP 1PH ELEC MOTOR FKM VITON SEALS
PUMP-2" POLY 5HP 3PH ELEC MOTOR FKM VITON SEALS
PUMP-MFLD 2" FP SUPER PUMP 6.5HP B&S PRO
PUMP-MFLD 2" FP SUPER PUMP 6.5HP B&S PRO WET SEAL
PUMP-MFLD 2" FP SUPER PUMP 6.5HP HONDA
PUMP-MFLD 2" FP SUPER PUMP 6.5HP HONDA WET SEAL
Fertilizer - Liquid
www.feiinc.com
349
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Fertilizer - Liquid
Repair Parts
PART NUMBER
T3-12000A
T3-12999
T3-12882A
T3-12703A
T3-12713
T3-12713V
350
DESCRIPTION
KIT-REPAIR 2" PUMP 5 VANE
KIT-O-RING 1-1/2" & 2" PUMP
PEDESTAL ASSY-BRNG 1-1/2",2"
BRACKET-REAR 1-1/2", 2"
SEAL ASSY-1-1/2",2",3" POLY PUMPS
SEAL ASSY-FKM VITON W/316 SS CUP & SPRING
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Banjo Transfer Pumps
2" Poly
Repair Parts
PART NUMBER
T3-12754
T3-12719A
T3-12771A
T3-12772
T3-12775A
T3-12702A
T3-12705
T3-12712A
T3-12777
UV-15163
T3-15035
DESCRIPTION
SEGMENT-O-RING 1-1/2",2",3"
O-RING-1-1/2",2",3" BODY
IMPELLER-1-1/2" 3-VANE
IMPELLER-2" 5-VANE
NUT-HEX IMPELLER 1/2",2",3"
VOLUTE-1-1/2",2" PUMP
VALVE-CHECK 1-1/2",2",3"
BODY ASSY-2"
PLUG-1-1/2",2" PRIME
O-RING-1-1-1/4" DRN PLG EPDM
SEAL ASSY-FKM VITON MECHANICAL 2" & 3" POLY WET SEAL PUMPS
Fertilizer - Liquid
www.feiinc.com
351
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Banjo Transfer Pumps
3" Poly
Fertilizer - Liquid
3" polypropylene pumps are corrosion resistant, lightweight and portable. The feature high performance impellers and EPDM standard.
Manifold wet seal pumps feature a run dry capability. They offer a compact design and double seal contained in ethylene glycol reservoir.
Carbon ceramic seal faces with stainless steel cup and spring with EPDM rubber. The pump end is separated from the engine and there
are large weep holes between pump end and engine. It is ‘V’ shaped for quicker priming.
Pumps with hydraulic motors have a hydraulic fluid capacity of 6 gallons minimum and 10 gallons maximum with 12 HP motor, 3600 rpm.
These pumps can be used for open or closed systems.
CAUTION-WARNING: Do not run pump dry, restrict or reduce port sizes, or deadhead pump. This could cause component failure to pump.
DO NOT USE WITH FLAMMMABLE LIQUIDS.
PART NUMBER
300PB
300PBW
300PO
300P-11PRO
300POW
300POW6
300PH-13W
300PH-6
300PH-6-200BAN
300PHY
300PHYW
M300PO
M300PH13W
352
DESCRIPTION
PUMP-3" POLY BEARING PED 3/4" SHAFT 4 VANE IMPELLER
PUMP-3" POLY WET SL BRG PED 3/4" SHAFT 4 VANE IMPELLER
PUMP-ONLY 3" POLY 3/4" SHAFT 4 VANE IMPELLER UNASSEMBLED
PUMP-3" POLY 11HP BRIGGS PRO SERIES
PUMP-ONLY 3" POLY WET SEAL FULL IMPELLER
PUMP-3" POLY W/S 3/4" SHAFT
PUMP-3" POLY W/13HP WET SEAL HONDA
PUMP-3" POLY 6.5HP HONDA GAS ENGINE
PUMP-3" POLY 6.5HP HONDA GAS ENGINE
PUMP-3" POLY 12HP HYDR MOTOR
PUMP-3" POLY 12HP HYDR MOTOR WET SEAL
PUMP-POLY ONLY 3" MANIFOLD
PUMP-POLY 3" MANIFOLD 13 HP HONDA W/WET SEAL
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
NOTES
Fertilizer - Liquid
www.feiinc.com
353
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Banjo Transfer Pumps
3" Poly
Fertilizer - Liquid
Repair Parts
354
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Banjo Transfer Pumps
3" Poly
Repair Parts
DESCRIPTION
KIT-3" IMPELLER REPAIR 4-VANE
KIT-O-RING 3" PUMP
KIT-O-RING FOR 3" PUMP FKM
SEAL ASSY-1-1/2",2",3" POLY PUMPS
SEAL ASSY-FKM VITON W/316 SS CUP & SPRING
BODY ASSY-3" POLY PUMP
PUMP-3" VOLUTE POLY
O-RING-1-1/2",2",3" BODY
IMPELLER-3" POLY PUMP 4 VANE 4.80 OD
IMPELLER-3" POLY PUMP 4 VANE 5.02 OD
SEGMENT-O-RING 1-1/2",2",3"
PLUG-3" PRIME
O-RING-3" PRIME PLG
PEDESTAL ASSY-BRNG 1-1/2",2"
RESERVOIR-WET SEAL FOR 11HP HONDA & BRIGGS ENGINES
O-RING-3"
SEAL ASSY-FKM VITON MECHANICAL 2" & 3" POLY WET SEAL PUMPS
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
T3-13000
T3-13999
T3-13999V
T3-12713
T3-12713V
T3-13712
T3-13702
T3-12719A
T3-13771
T3-13772
T3-12754
T3-13777
T3-13778
T3-12882A
T3-12201W
T3-13719
T3-15035
355
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Banjo Transfer Pumps
Fertilizer - Liquid
2" Cast Iron
The cast iron construction of these 2" pumps is intended for rugged dependable service. They have a stainless steel shaft, carbon ceramic
seal with stainless steel cup and spring with FKM (Viton type) rubber. They have replaceable inlet and outlet flanges and dynamically
balanced impeller.
Pumps with hydraulic motors have a hydraulic fluid capacity of 6 gallons minimum and 10 gallons maximum with 12 HP motor. These
pumps can be used for open or closed systems and have a minimum psi of 500 and maximum of 2000 psi.
Manifold wet seal pumps have a run dry capability. The pump end is separated from the engine. It has large weep holes between the
pump and the engine or motor. It is ‘V’ shaped for quicker priming.
CAUTION-WARNING: Do not run pump dry, restrict or reduce port sizes, or deadhead pump. This could cause component failure to pump.
DO NOT USE WITH FLAMMMABLE LIQUIDS.
PART NUMBER
200-POI
200-PBI
200PI6PRO
200PIH-5
200PIHA
200PIHY
234-PIE-5
234PIE51
222PIE5
234POI
222PIE51
222PIE51W
225POI
M222PIE5W
M222PIE51W
356
DESCRIPTION
PUMP-ONLY 2" CI 3/4" STRAIGHT KEYED SHAFT
PUMP-2" CI BEARING PEDESTAL 3/4" STRAIGHT SHAFT
PUMP-2" CI 6.5HP BRIGGS ENGINE PROSERIES
PUMP-2" CI W/5.5 HONDA
PUMP-2" CI HYDR DRIVE W/O MOTOR
PUMP-2" CI 12HP HYDR MOTOR
PUMP-2" CI 5HP 3PH ELEC MOTOR
PUMP-2" CI 5HP 1PH ELEC MOTOR
PUMP-2" CI W/5.0 HP 3PH ELEC MOTOR
PUMP-2" CI W/184TC FRAME ADAPTER
PUMP-2" CI W/5.0 HP 1PH ELEC MOTOR
PUMP-2" CI W5.0HP 1PH ELEC MOTOR WET SEAL
PUMP-222 SERIES CI TRIM IMP PUMP ONLY
PUMP-MFLD 2" CI WET SEAL 5HP 1PH ELEC MOTOR
PUMP-MFLD 2" CI WET SEAL 5HP 1PH ELEC MOTOR
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Banjo Transfer Pumps
3" Cast Iron
Pumps with hydraulic motors have a hydraulic fluid capacity of 9 gallons minimum and 13 gallons maximum with 21 HP motor. These
pumps can be used for open systems and have a minimum psi of 600 and maximum of 3000 psi.
Wet seal pumps have a run dry capability. They have replaceable inlet and outlet flanges. Graphite loaded silicon carbide seal with
stainless steel cup and spring with FKM (viton type) rubber. The pump end is separated from the engine and double seal contained in
ethylene glycol reservoir, 350 gallons per minute with a maximum pressure of 63 psi. The manifold wet seal pumps have large weep
holes between the pump and the engine or motor and are ‘V’ shaped for quicker priming.
CAUTION-WARNING: Do not run pump dry, restrict or reduce port sizes, or deadhead pump. This could cause component failure to pump.
DO NOT USE WITH FLAMMMABLE LIQUIDS.
PART NUMBER
300-PBI
300POI
300PIHY
301PIH13W
300-PIH-11
300-PIH-13
M332PIE101W
M332PIE10W
M332PIH13W
M332POIW
DESCRIPTION
PUMP-3" CI BEARNG PED 1" SHAFT
PUMP-3" CAST IRON CENT
PUMP-3" CI 21HP HYDR DRIVEN MOTOR
PUMP-3" CI 13HP WET SL HONDA ELEC START & PULL ROPE
PUMP-3" CI 11HP HONDA GAS ELEC START & PULL ROPE
PUMP-3" CI 13HP HONDA GAS ELEC START & PULL ROPE
PUMP-MFLD 3" CI WET SEAL 10HP 1PH ELEC MOTOR
PUMP-MFLD 3" CI WET SEAL 10HP 3PH ELEC MOTOR
PUMP-CENTRIFUGAL 3" CI 13HP HONDA W/SEAL
PUMP-MFLD 3" CI WET SEAL GAS ENGINE
www.feiinc.com
357
Fertilizer - Liquid
The cast iron construction of these 3" pumps is intended for rugged dependable service. They have a stainless steel shaft, carbon ceramic
seal with stainless steel cup and spring with FKM (viton type) rubber. They have replaceable inlet and outlet flanges and dynamically
balanced impeller.
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
John Blue Centrifugal Pumps
Fertilizer - Liquid
2" Centrifugal
CDS-John Blue centrifugal transfer pumps are designed to outlast your equipment. These pumps can be run dry without damaging the seal
and at a price you can afford. They come in many different models and can transfer fluids with high efficiency over a wide range of flows
and pressures. With more than a century of manufacturing experience CDS-John Blue Company offers several series of centrifugal pumps.
CDS-John Blue's two year unconditional warranty on all centrifugal pumps demonstrates our confidence in our reliability.
FEATURES:
• Patented Vac-U-Seal impeller design creates a vacuum between the impeller and mechanical seal. Lack of pressure on the seal
face minimizes seal wear and results in a longer seal life.
• Double wet seal design provides for continuous lubrication of the seal faces. This wet seal design allows the pump to be run dry
for extended periods with no damage to the mechanical seal faces.
• Closed impeller design minimizes thrust loading on the drive motor extending the life of the drive motor. Impeller wear actually
increases performance.
• Extra thick cast walls provide extra strength and extend the life of the unit due to abrasion and corrosion.
• Shipping plug added to help stop the pump boxes from getting wet during shipping; each pump is tested before it leaves the
factory.
358
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
John Blue Centrifugal Pumps
2" Centrifugal
PART NUMBER
S-3220
S-3220-G5H
S-3220-P
SP-3220
SP-3220-G5H
S-3220-PH
DESCRIPTION
PUMP ONLY-2" CENTRIFUGAL 197 GPM 3/4" SHAFT
PUMP-2" CENTRIFUGAL 197 GPM W/5HP HONDA
PUMP ONLY-2" CENTRIFUGAL 197 GPM W/PEDESTAL
PUMP ONLY-2" SELF PRIMING 152 GPM 3/4" SHAFT
PUMP-2" SELF PRIMING 152 GPM W/5HP HONDA
PUMP-CENTRIFUGAL 2" STRAIGHT W/HYDR MOTOR 197 GPM
Fertilizer - Liquid
www.feiinc.com
359
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Fertilizer - Liquid
3" Centrifugal
CDS-John Blue centrifugal transfer pumps are designed to outlast your equipment. These pumps can be run dry without damaging the seal
and at a price you can afford. They come in many different models and can transfer fluids with high efficiency over a wide range of flows
and pressures. With more than a century of manufacturing experience CDS-John Blue Company offers several series of centrifugal pumps.
CDS-John Blue's two year unconditional warranty on all centrifugal pumps demonstrates our confidence in our reliability.
FEATURES:
• Patented Vac-U-Seal impeller design creates a vacuum between the impeller and mechanical seal. Lack of pressure on the seal
face minimizes seal wear and results in a longer seal life.
• Double wet seal design provides for continuous lubrication of the seal faces. This wet seal design allows the pump to be run dry
for extended periods with no damage to the mechanical seal faces.
• Closed impeller design minimizes thrust loading on the drive motor extending the life of the drive motor. Impeller wear actually
increases performance.
• Extra thick cast walls provide extra strength and extend the life of the unit due to abrasion and corrosion.
• Shipping plug added to help stop the pump boxes from getting wet during shipping; each pump is tested before it leaves the
factory.
• Improved impeller design on 3" self-priming pumps offers 75 gpm more flow at 30 psi.
• 1" port hole for pressurized rinse option has been added to a 3" self-priming pump.
360
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
John Blue Centrifugal Pumps
3" Centrifugal
DESCRIPTION
PUMP ONLY-3" CENTRIFUGAL 365 GPM 1-1/8" SHAFT
PUMP ONLY-3" SELF PRIMING 308 GPM 1" SHAFT
PUMP ONLY-3" SELF PRIMING 308 GPM 1-1/8" SHAFT
PUMP-3" W/10HP ELEC 3PH 308 GPM
PUMP-3" SELF PRIMING 400 GPM W/13HP HONDA ELEC START
PUMP-3" TRUCK SELF PRIMING HYDR DRIVE
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
S-3320
SP-3320-BS
SP-3320-E
SP-3320-E10TB
SP-3320-G13H
SP-3345-PH
361
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pumps and Motors
Couplings and Baseplates
PRC200 roll cage for 2” poly pumps is made of steel and powder coat finished for durability.
Fertilizer - Liquid
Lovejoy Coupling Components
• Easy inspection of load carrying spider.
• Flexibility of angular or parallel misalignment of shafts by
Buna-N spider member permits smooth power
transmission.
• No lubrication.
PART NUMBER
PRC200
T3-18700
T3-18702
02769113
LJ-12
LJ-58
LJ-34
LJ-78
LJ-1
LJ100-1
LJ-118
LJ-138
LJ-S
LJ-S38
LJ-S58
•
•
•
Easy installation.
No metal to metal contact.
Resistant to oil, dirt, sand, moisture and grease.
DESCRIPTION
KIT-ROLL CAGE 2" POLY PUMP
BASE PLATE-ASSY UNIVERSAL
GUARD-COUPLING REPLACEMENT F/2 & 3" CI PUMPS
COUPLING-12MM HALF LOVEJOY
COUPLING-1/2" HALF LOVEJOY
COUPLING-5/8" HALF LOVEJOY
COUPLING-3/4" HALF LOVEJOY
COUPLING-7/8" HALF LOVEJOY
COUPLING-1" HALF LOVEJOY ML095
COUPLING-1" HALF LOVEJOY ML099
COUPLING-1-1/8" HALF LOVEJOY
COUPLING-1-3/8" HALF LOVEJOY
SPIDER-BUNA ML095 UP TO 1-1/8"
SPIDER-BUNA ML099 UP TO 1-3/8"
SPIDER-BUNA ML110 UP TO 1-5/8"
Pipe and Accessories
Schedule 40 Black Iron Pipe
Schedule 40 black iron pipe comes in 21' sections but can be cut to order. Pricing listed is per
foot.
PART NUMBER
110-001039
110-001044
110-001049
110-001059
110-001064
362
DESCRIPTION
PIPE-BLACK IRON SCH 40 1/2"
PIPE-BLACK IRON SCH 40 3/4"
PIPE-BLACK IRON SCH 40 1"
PIPE-BLACK IRON SCH 40 1-1/2"
PIPE-BLACK IRON SCH 40 2"
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pipe and Accessories
Fittings
Black Iron Schedule 40
Bushings
DESCRIPTION
BUSHING-HEX 1/4" X 1/8" SCH 40 BLACK IRON
BUSHING-HEX 3/8" X 1/4" SCH 40 BLACK IRON
BUSHING-HEX 1/2" X 3/8" SCH 40 BLACK IRON
BUSHING-HEX 1/2" X 1/4" SCH 40 BLACK IRON
BUSHING-HEX 1/2" X 1/8" SCH 40 BLACK IRON
BUSHING-HEX 3/4" X 1/2" SCH 40 BLACK IRON
BUSHING-HEX 3/4" X 3/8" SCH 40 BLACK IRON
BUSHING-HEX 3/4" X 1/4" SCH 40 BLACK IRON
BUSHING-HEX 1" X 3/4" SCH 40 BLACK IRON
BUSHING-HEX 1" X 1/2" SCH 40 BLACK IRON
BUSHING-HEX 1" X 1/4" SCH 40 BLACK IRON
BUSHING-HEX 1-1/4" X 3/4" SCH 40 BLACK IRON
BUSHING-HEX 1-1/4" X 1" SCH 40 BLACK IRON
BUSHING-HEX 1-1/2" X 1/2" SCH 40 BLACK IRON
BUSHING-HEX 1-1/2" X 1-1/4" SCH 40 BLACK IRON
BUSHING-HEX 2" X 1/2" SCH 40 BLACK IRON
BUSHING-HEX 2" X 1" SCH 40 BLACK IRON
BUSHING-HEX 2" X 1-1/2" SCH 40 BLACK IRON
BUSHING-HEX 2-1/2" X 2" SCH 40 BLACK IRON
BUSHING-HEX 3" X 1" SCH 40 BLACK IRON
BUSHING-HEX 3" X 2" SCH 40 BLACK IRON
BUSHING-HEX 3" X 2-1/2" SCH 40 BLACK IRON
BUSHING-HEX 4" X 2" SCH 40 BLACK IRON
PART NUMBER
245-006580
245-006582
245-006584
245-006586
245-006588
245-006590
245-006592
245-006594
245-006596
245-006600
DESCRIPTION
CAP-1/8" SCH 40 BLACK IRON
CAP-1/4" SCH 40 BLACK IRON
CAP-3/8" SCH 40 BLACK IRON
CAP-1/2" SCH 40 BLACK IRON
CAP-3/4" SCH 40 BLACK IRON
CAP-1" SCH 40 BLACK IRON
CAP-1-1/4" SCH 40 BLACK IRON
CAP-1-1/2" SCH 40 BLACK IRON
CAP-2" SCH 40 BLACK IRON
CAP-3" SCH 40 BLACK IRON
Fertilizer - Liquid
PART NUMBER
244-010536
244-010540
244-010548
244-010552
244-010556
244-010560
244-010564
244-010568
245-010664
245-010668
245-010676
245-010704
245-010700
245-010752
245-010740
245-010784
245-010776
245-010768
245-010796
245-010810
245-010828
245-010824
245-010888
Caps
www.feiinc.com
363
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pipe and Accessories
Fittings
Black Iron Schedule 40
Couplings
PART NUMBER
250-001000
250-001040
250-001080
250-001120
250-001160
250-001200
250-001240
250-001280
250-001320
250-002000
IBSCTTP
DESCRIPTION
COUPLING-1/8" FPT SCH 40 BLACK IRON
COUPLING-1/4" FPT SCH 40 BLACK IRON
COUPLING-3/8" FPT SCH 40 BLACK IRON
COUPLING-1/2" FPT SCH 40 BLACK IRON
COUPLING-3/4" FPT SCH 40 BLACK IRON
COUPLING-1" FPT SCH 40 BLACK IRON
COUPLING-1-1/4" FPT SCH 40 BLACK IRON
COUPLING-1-1/2" FPT SCH 40 BLACK IRON
COUPLING-2" FPT SCH 40 BLACK IRON
COUPLING-3" FPT SCH 40 BLACK IRON
COUPLING-4" SCH 40 BLACK IRON
PART NUMBER
245-006920
245-006940
245-006960
245-006980
245-007000
245-007020
245-007040
245-007060
245-007080
DESCRIPTION
CROSS-1/8" SCH 40 BLACK IRON
CROSS-1/4" SCH 40 BLACK IRON
CROSS-3/8" SCH 40 BLACK IRON
CROSS-1/2" SCH 40 BLACK IRON
CROSS-3/4" SCH 40 BLACK IRON
CROSS-1" SCH 40 BLACK IRON
CROSS-1-1/4" SCH 40 BLACK IRON
CROSS-1-1/2" SCH 40 BLACK IRON
CROSS-2" SCH 40 BLACK IRON
PART NUMBER
245-002280
245-002300
245-002320
245-002340
245-002360
245-002380
245-002400
245-002420
245-002440
245-002480
DESCRIPTION
ELBOW-45 DEG 1/8" SCH 40 BLACK IRON
ELBOW-45 DEG 1/4" SCH 40 BLACK IRON
ELBOW-45 DEG 3/8" SCH 40 BLACK IRON
ELBOW-45 DEG 1/2" SCH 40 BLACK IRON
ELBOW-45 DEG 3/4" SCH 40 BLACK IRON
ELBOW-45 DEG 1" SCH 40 BLACK IRON
ELBOW-45 DEG 1-1/4" SCH 40 BLACK IRON
ELBOW-45 DEG 1-1/2" SCH 40 BLACK IRON
ELBOW-45 DEG 2" SCH 40 BLACK IRON
ELBOW-45 DEG 3" SCH 40 BLACK IRON
Fertilizer - Liquid
Crosses
Elbows - 45 Degree
364
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pipe and Accessories
Fittings
Black Iron Schedule 40
Elbows - 90 Degree
PART NUMBER
245-000020
245-000040
245-000060
245-000080
245-000100
245-000120
245-000140
245-000160
245-000180
245-000200
245-000220
DESCRIPTION
ELBOW-90 DEG 1/8" SCH 40 BLACK IRON
ELBOW-90 DEG 1/4" SCH 40 BLACK IRON
ELBOW-90 DEG 3/8" SCH 40 BLACK IRON
ELBOW-90 DEG 1/2" SCH 40 BLACK IRON
ELBOW-90 DEG 3/4" SCH 40 BLACK IRON
ELBOW-90 DEG 1" SCH 40 BLACK IRON
ELBOW-90 DEG 1-1/4" SCH 40 BLACK IRON
ELBOW-90 DEG 1-1/2" SCH 40 BLACK IRON
ELBOW-90 DEG 2" SCH 40 BLACK IRON
ELBOW-90 DEG 2-1/2" SCH 40 BLACK IRON
ELBOW-90 DEG 3" SCH 40 BLACK IRON
Elbows - 90 Degree Street
DESCRIPTION
ELBOW-90 DEG STR 1/8" SCH 40 BLACK IRON
ELBOW-90 DEG STR 1/4" SCH 40 BLACK IRON
ELBOW-90 DEG STR 3/8" SCH 40 BLACK IRON
ELBOW-90 DEG STR 1/2" SCH 40 BLACK IRON
ELBOW-90 DEG STR 3/4" SCH 40 BLACK IRON
ELBOW-90 DEG STR 1" SCH 40 BLACK IRON
ELBOW-90 DEG STR 1-1/4" SCH 40 BLACK IRON
ELBOW-90 DEG STR 1-1/2" SCH 40 BLACK IRON
ELBOW-90 DEG STR 2" SCH 40 BLACK IRON
ELBOW-90 DEG STR 3" SCH 40 BLACK IRON
PART NUMBER
253-000020
253-000040
253-000060
253-000080
DESCRIPTION
NIPPLE TRAY-3/8" BLACK SCH 40 6 EACH CLOSE -6"
NIPPLE TRAY-1/2" BLACK SCH 40 6 EACH -6"
NIPPLE TRAY-3/4" BLACK SCH 40 6 EACH -6"
NIPPLE TRAY-1" BLACK SCH 40 6 EACH -6"
Fertilizer - Liquid
PART NUMBER
245-001560
245-001580
245-001600
245-001620
245-001640
245-001660
245-001680
245-001700
245-001720
245-001760
Nipple Trays
www.feiinc.com
365
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Nipples
Fertilizer - Liquid
PART NUMBER
252-000020
252-000060
252-000080
252-000120
252-000500
252-000540
252-000560
252-000580
252-000600
252-000620
252-000640
252-000680
252-000720
252-000800
252-000880
252-000980
252-001000
252-001020
252-001040
252-001060
252-001080
252-001100
252-001120
252-001140
252-001180
252-001260
252-001440
252-001460
252-001480
252-001500
252-001520
252-001540
252-001560
252-001580
252-001600
252-001620
252-001640
252-001680
252-001720
252-001760
252-001800
252-001840
252-001880
252-001900
252-001920
252-001960
252-001980
252-002000
252-002020
252-002040
366
DESCRIPTION
NIPPLE-1/8" X CLOSE SCH 40 BLACK IRON
NIPPLE-1/8" X 1-1/2" SCH 40 BLACK IRON
NIPPLE-1/8" X 2" SCH 40 BLACK IRON
NIPPLE-1/8" X 3" SCH 40 BLACK IRON
NIPPLE-1/4" X CLOSE SCH 40 BLACK IRON
NIPPLE-1/4" X 1-1/2" SCH 40 BLACK IRON
NIPPLE-1/4" X 2" SCH 40 BLACK IRON
NIPPLE-1/4" X 2-1/2" SCH 40 BLACK IRON
NIPPLE-1/4" X 3" SCH 40 BLACK IRON
NIPPLE-1/4" X 3-1/2" SCH 40 BLACK IRON
NIPPLE-1/4" X 4" SCH 40 BLACK IRON
NIPPLE-1/4" X 5" SCH 40 BLACK IRON
NIPPLE-1/4" X 6" SCH 40 BLACK IRON
NIPPLE-1/4" X 8" SCH 40 BLACK IRON
NIPPLE-1/4" X 12" SCH 40 BLACK IRON
NIPPLE-3/8" X CLOSE SCH 40 BLACK IRON
NIPPLE-3/8" X 1-1/2" SCH 40 BLACK IRON
NIPPLE-3/8" X 2" SCH 40 BLACK IRON
NIPPLE-3/8" X 2-1/2" SCH 40 BLACK IRON
NIPPLE-3/8" X 3" SCH 40 BLACK IRON
NIPPLE-3/8" X 3-1/2" SCH 40 BLACK IRON
NIPPLE-3/8" X 4" SCH 40 BLACK IRON
NIPPLE-3/8" X 4-1/2" SCH 40 BLACK IRON
NIPPLE-3/8" X 5" SCH 40 BLACK IRON
NIPPLE-3/8" X 6" SCH 40 BLACK IRON
NIPPLE-3/8" X 8" SCH 40 BLACK IRON
NIPPLE-1/2" X CLOSE SCH 40 BLACK IRON
NIPPLE-1/2" X 1-1/2" SCH 40 BLACK IRON
NIPPLE-1/2" X 2" SCH 40 BLACK IRON
NIPPLE-1/2" X 2-1/2" SCH 40 BLACK IRON
NIPPLE-1/2" X 3" SCH 40 BLACK IRON
NIPPLE-1/2" X 3-1/2" SCH 40 BLACK IRON
NIPPLE-1/2" X 4" SCH 40 BLACK IRON
NIPPLE-1/2" X 4-1/2" SCH 40 BLACK IRON
NIPPLE-1/2" X 5" SCH 40 BLACK IRON
NIPPLE-1/2" X 5-1/2" SCH 40 BLACK IRON
NIPPLE-1/2" X 6" SCH 40 BLACK IRON
NIPPLE-1/2" X 7" SCH 40 BLACK IRON
NIPPLE-1/2" X 8" SCH 40 BLACK IRON
NIPPLE-1/2" X 9" SCH 40 BLACK IRON
NIPPLE-1/2" X 10" SCH 40 BLACK IRON
NIPPLE-1/2" X 11" SCH 40 BLACK IRON
NIPPLE-1/2" X 12" SCH 40 BLACK IRON
NIPPLE-3/4" X CLOSE SCH 40 BLACK IRON
NIPPLE-3/4" X 1-1/2" SCH 40 BLACK IRON
NIPPLE-3/4" X 2" SCH 40 BLACK IRON
NIPPLE-3/4" X 2-1/2" SCH 40 BLACK IRON
NIPPLE-3/4" X 3" SCH 40 BLACK IRON
NIPPLE-3/4" X 3-1/2" SCH 40 BLACK IRON
NIPPLE-3/4" X 4" SCH 40 BLACK IRON
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
DESCRIPTION
NIPPLE-3/4" X 4-1/2" SCH 40 BLACK IRON
NIPPLE-3/4" X 5" SCH 40 BLACK IRON
NIPPLE-3/4" X 5-1/2" SCH 40 BLACK IRON
NIPPLE-3/4" X 6" SCH 40 BLACK IRON
NIPPLE-3/4" X 7" SCH 40 BLACK IRON
NIPPLE-3/4" X 8" SCH 40 BLACK IRON
NIPPLE-3/4" X 9" SCH 40 BLACK IRON
NIPPLE-3/4" X 10" SCH 40 BLACK IRON
NIPPLE-3/4" X 11" SCH 40 BLACK IRON
NIPPLE-3/4" X 12" SCH 40 BLACK IRON
NIPPLE-1" X CLOSE SCH 40 BLACK IRON
NIPPLE-1" X 2" SCH 40 BLACK IRON
NIPPLE-1" X 2-1/2" SCH 40 BLACK IRON
NIPPLE-1" X 3" SCH 40 BLACK IRON
NIPPLE-1" X 3-1/2" SCH 40 BLACK IRON
NIPPLE-1" X 4" SCH 40 BLACK IRON
NIPPLE-1" X 4-1/2" SCH 40 BLACK IRON
NIPPLE-1" X 5" SCH 40 BLACK IRON
NIPPLE-1" X 6" SCH 40 BLACK IRON
NIPPLE-1" X 7" SCH 40 BLACK IRON
NIPPLE-1" X 8" SCH 40 BLACK IRON
NIPPLE-1-1/4" X CLOSE SCH 40 BLACK IRON
NIPPLE-1-1/4" X 2" SCH 40 BLACK IRON
NIPPLE-1-1/4" X 2-1/2" SCH 40 BLACK IRON
NIPPLE-1-1/4" X 3" SCH 40 BLACK IRON
NIPPLE-1-1/4" X 3-1/2" SCH 40 BLACK IRON
NIPPLE-1-1/4" X 4" SCH 40 BLACK IRON
NIPPLE-1-1/4" X 5" SCH 40 BLACK IRON
NIPPLE-1-1/4" X 6" SCH 40 BLACK IRON
NIPPLE-1-1/4" X 7" SCH 40 BLACK IRON
NIPPLE-1-1/4" X 8" SCH 40 BLACK IRON
NIPPLE-1-1/2" X CLOSE SCH 40 BLACK IRON
NIPPLE-1-1/2" X 2" SCH 40 BLACK IRON
NIPPLE-1-1/2" X 2-1/2" SCH 40 BLACK IRON
NIPPLE-1-1/2" X 3" SCH 40 BLACK IRON
NIPPLE-1-1/2" X 3-1/2" SCH 40 BLACK IRON
NIPPLE-1-1/2" X 4" SCH 40 BLACK IRON
NIPPLE-1-1/2" X 5" SCH 40 BLACK IRON
NIPPLE-1-1/2" X 6" SCH 40 BLACK IRON
NIPPLE-1-1/2" X 7" SCH 40 BLACK IRON
NIPPLE-1-1/2" X 8" SCH 40 BLACK IRON
NIPPLE-1-1/2" X 12" SCH 40 BLACK IRON
NIPPLE-2" X CLOSE SCH 40 BLACK IRON
NIPPLE-2" X 2-1/2" SCH 40 BLACK IRON
NIPPLE-2" X 3" SCH 40 BLACK IRON
NIPPLE-2" X 3-1/2" SCH 40 BLACK IRON
NIPPLE-2" X 4" SCH 40 BLACK IRON
NIPPLE-2" X 4-1/2" SCH 40 BLACK IRON
NIPPLE-2" X 5" SCH 40 BLACK IRON
NIPPLE-2" X 6" SCH 40 BLACK IRON
NIPPLE-2" X 7" SCH 40 BLACK IRON
NIPPLE-2" X 8" SCH 40 BLACK IRON
NIPPLE-2" X 10" SCH 40 BLACK IRON
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
252-002060
252-002080
252-002100
252-002120
252-002160
252-002200
252-002240
252-002280
252-002300
252-002360
252-002380
252-002400
252-002420
252-002440
252-002460
252-002480
252-002500
252-002520
252-002560
252-002600
252-002640
252-002820
252-002840
252-002860
252-002880
252-002900
252-002920
252-002960
252-003000
252-003040
252-003080
252-003260
252-003280
252-003300
252-003320
252-003340
252-003360
252-003400
252-003440
252-003480
252-003520
252-003680
252-003700
252-003720
252-003740
252-003760
252-003780
252-003800
252-003820
252-003860
252-003900
252-003940
252-003960
367
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pipe and Accessories
Fittings
Black Iron Schedule 40
Nipples
PART NUMBER
252-003980
252-004520
252-004540
252-004580
252-004660
252-004740
278-010000
DESCRIPTION
NIPPLE-2" X 12" SCH 40 BLACK IRON
NIPPLE-3" X CLOSE SCH 40 BLACK IRON
NIPPLE-3" X 3" SCH 40 BLACK IRON
NIPPLE-3" X 4" SCH 40 BLACK IRON
NIPPLE-3" X 6" SCH 40 BLACK IRON
NIPPLE-3" X 8" SCH 40 BLACK IRON
NIPPLE-4" X CLOSE SCH 40 BLACK IRON
PART NUMBER
244-005000
244-005002
244-005004
244-005006
244-005008
245-010222
245-010224
245-010226
245-010228
245-010230
245-010232
DESCRIPTION
PLUG-SQ HEAD 1/8" SCH 40 BLACK IRON
PLUG-SQ HEAD 1/4" SCH 40 BLACK IRON
PLUG-SQ HEAD 3/8" SCH 40 BLACK IRON
PLUG-SQ HEAD 1/2" SCH 40 BLACK IRON
PLUG-SQ HEAD 3/4" SCH 40 BLACK IRON
PLUG-1" CORED SCH 40 BLACK IRON
PLUG-1-1/4" CORED SCH 40 BLACK IRON
PLUG-1-1/2" CORED SCH 40 BLACK IRON
PLUG-2" CORED SCH 40 BLACK IRON
PLUG-2-1/2" CORED SCH 40 BLACK IRON
PLUG-3" CORED SCH 40 BLACK IRON
Fertilizer - Liquid
Plugs
368
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pipe and Accessories
Fittings
Black Iron Schedule 40
Bell Reducers
DESCRIPTION
RED BELL 1/4" X 1/8" SCH 40 BLACK IRON
RED BELL 3/8" X 1/8" SCH 40 BLACK IRON
RED-BELL 3/8" X 1/4" SCH 40 BLACK IRON
RED BELL 1/2" X 1/4" SCH 40 BLACK IRON
RED BELL 1/2" X 3/8" SCH 40 BLACK IRON
RED-BELL 3/4" X 1/4" SCH 40 BLACK IRON
RED-BELL 3/4" X 3/8" SCH 40 BLACK IRON
RED-BELL 3/4" X 1/2" SCH 40 BLACK IRON
RED-BELL 1" X 1/2" SCH 40 BLACK IRON
RED-BELL 1" X 3/4" SCH 40 BLACK IRON
RED-BELL 1-1/4" X 3/4" SCH 40 BLACK IRON
RED-BELL 1-1/4" X 1" SCH 40 BLACK IRON
RED-BELL 1-1/2" X 3/4" SCH 40 BLACK IRON
RED-BELL 1-1/2" X 1" SCH 40 BLACK IRON
RED-BELL 1-1/2" X 1-1/4" SCH 40 BLACK IRON
RED-BELL 2" X 1/2" SCH 40 BLACK IRON
RED-BELL 2" X 1" SCH 40 BLACK IRON
RED-BELL 2" X 1-1/4" SCH 40 BLACK IRON
RED-BELL 2" X 1-1/2" SCH 40 BLACK IRON
RED-BELL 3" X 2" SCH 40 BLACK IRON
PART NUMBER
245-002920
245-002940
245-002960
245-002980
245-003000
245-003020
245-003040
245-003060
245-003080
245-003120
DESCRIPTION
TEE-1/8" SCH 40 BLACK IRON
TEE-1/4" SCH 40 BLACK IRON
TEE-3/8" SCH 40 BLACK IRON
TEE-1/2" SCH 40 BLACK IRON
TEE-3/4" SCH 40 BLACK IRON
TEE-1" SCH 40 BLACK IRON
TEE-1-1/4" SCH 40 BLACK IRON
TEE-1-1/2" SCH 40 BLACK IRON
TEE-2" SCH 40 BLACK IRON
TEE-3" SCH 40 BLACK IRON
Fertilizer - Liquid
PART NUMBER
245-008480
245-008520
245-008500
245-008560
245-008540
245-008640
245-008620
245-008600
245-008700
245-008680
245-008780
245-008760
245-008860
245-008840
245-008820
245-008980
245-008940
245-008920
245-008900
245-009100
Tees
www.feiinc.com
369
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pipe and Accessories
Fittings
Black Iron Schedule 40
Unions
PART NUMBER
245-013760
245-013780
245-013800
245-013820
245-013860
245-013880
245-013900
245-013920
DESCRIPTION
UNION-1/4" FPT BRASS SEAT SCH 40 BLACK IRON
UNION-3/8" FPT BRASS SEAT SCH 40 BLACK IRON
UNION-1/2" BRASS SEAT SCH 40 BLACK IRON
UNION-3/4" BRASS SEAT SCH 40 BLACK IRON
UNION-1" BRASS SEAT SCH 40 BLACK IRON
UNION-1-1/4" BRASS SEAT SCH 40 BLACK IRON
UNION-1-1/2" BRASS SEAT SCH 40 BLACK IRON
UNION-2" BRASS SEAT SCH 40 BLACK IRON
PART NUMBER
270-004500
270-004520
270-004525
270-004530
270-004535
270-004540
270-004545
270-004620
270-004630
270-004660
270-004700
270-004820
270-004830
270-004840
270-004900
270-004910
270-004920
270-004960
270-005160
270-005180
270-005140
DESCRIPTION
BUSHING-REDUCER HEX 1/4" X 1/8" SS
BUSHING-REDUCER HEX 3/8" X 1/4" SS
BUSHING-REDUCER HEX 1/2" X 1/4" SS
BUSHING-REDUCER HEX 1/2" X 3/8" SS
BUSHING-REDUCER HEX 3/4" X 1/4" SS
BUSHING-REDUCER HEX 3/4" X 1/2" SS
BUSHING-REDUCER HEX 1" X 1/4" SS
BUSHING-RECUCER HEX 1" X 3/4" SS
BUSHING-REDUCER HEX 1" X 1/2" SS
BUSHING-REDUCER HEX 1-1/4" X 1" SS
BUSHING-REDUCER HEX 1-1/4" X 3/4" SS
BUSHING-REDUCER HEX 1-1/2" X 1-1/4" SS
BUSHING-REDUCER HEX 1-1/2" X 3/4" SS
BUSHING-REDUCER HEX 1-1/2" X 1" SS
BUSHING-REDUCER HEX 2" X 1" SS
BUSHING-REDUCER HEX 2" X 3/4" SS
BUSHING-REDUCER HEX 2" X 1-1/2" SS
BUSHING-REDUCER HEX 2-1/2" X 2" SS
BUSHING-REDUCER HEX 4" X 2" SS
BUSHING-REDUCER HEX 4" X 3" SS
BUSHING-REDUCER HEX 3" X 2" SS
Stainless Steel
Fertilizer - Liquid
Bushings
370
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pipe and Accessories
Fittings
Stainless Steel
Caps
PART NUMBER
270-004120
270-004140
270-004160
270-004180
270-004200
270-004220
270-004240
270-004260
DESCRIPTION
CAP-1/4" SS
CAP-3/8" SS
CAP-1/2" SS
CAP-3/4" SS
CAP-1" SS
CAP-1-1/4" SS
CAP-1-1/2" SS
CAP-2" SS
PART NUMBER
270-002480
270-002500
270-002520
270-002540
270-002560
270-002580
270-002600
270-002620
270-002640
270-002680
304-FC400
DESCRIPTION
COUPLING-1/8" FPT SS
COUPLING-1/4" FPT SS
COUPLING-3/8" FPT SS
COUPLING-1/2" FPT SS
COUPLING-3/4" FPT SS
COUPLING-1" FPT SS
COUPLING-1-1/4" FPT SS
COUPLING-1-1/2" FPT SS
COUPLING-2" FPT SS
COUPLING-3" FPT SS
COUPLING-4" FPT SS
PART NUMBER
CR14SS
CR038SS
CR12SS
CR100SS
CR114SS
CR112SS
CR200SS
CR300SS
DESCRIPTION
CROSS-1/4" FPT SS
CROSS-3/8" FPT SS
CROSS-1/2" FPT SS
CROSS-1" FPT SS
CROSS-1-1/4" FPT SS
CROSS-1-1/2" FPT SS
CROSS-2" FPT SS
CROSS-3" FPT SS
PART NUMBER
270-000640
270-000660
270-000680
270-000720
270-000740
270-000760
270-000780
270-000800
DESCRIPTION
ELBOW-45 DEG 1/4" SS
ELBOW-45 DEG 3/8" SS
ELBOW-45 DEG 1/2" SS
ELBOW-45 DEG 1" SS
ELBOW-45 DEG 1-1/4" SS
ELBOW-45 DEG 1-1/2" SS
ELBOW-45 DEG 2" SS
ELBOW-45 DEG 3" SS
Couplings
Fertilizer - Liquid
Crosses
Elbows - 45 Degree
www.feiinc.com
371
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pipe and Accessories
Fittings
Stainless Steel
Elbows - 90 Degree
PART NUMBER
270-000020
270-000040
270-000060
270-000080
270-000100
270-000120
270-000140
270-000160
270-000180
270-000220
DESCRIPTION
ELBOW-90 DEG 1/8" SS
ELBOW-90 DEG 1/4" SS
ELBOW-90 DEG 3/8" SS
ELBOW-90 DEG 1/2" SS
ELBOW-90 DEG 3/4" SS
ELBOW-90 DEG 1" SS
ELBOW-90 DEG 1-1/4" SS
ELBOW-90 DEG 1-1/2" SS
ELBOW-90 DEG 2" SS
ELBOW-90 DEG 3" SS
Elbows - 90 Degree Street
Fertilizer - Liquid
PART NUMBER
270-000970
270-000980
270-000975
270-001000
270-001020
270-001040
270-001060
270-001080
270-001100
270-001140
372
DESCRIPTION
ELBOW-90 DEG STREET 1/8" SS
ELBOW-90 DEG STREET1/4" SS
ELBOW-90 DEG STREET 3/8" SS
ELBOW-90 DEG STREET 1/2" SS
ELBOW-90 DEG STREET 3/4" SS
ELBOW-90 DEG STREET 1" SS
ELBOW-90 DEG STREET 1-1/4" SS
ELBOW-90 DEG STREET 1-1/2" SS
ELBOW-90 DEG STREET 2" SS
ELBOW-90 DEG STREET 3" SS
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Nipples
DESCRIPTION
NIPPLE-1/8" X CLOSE SS
NIPPLE-1/8" X 1-1/2" SS
NIPPLE-1/8" X 2" SS
NIPPLE-1/8" X 3" SS
NIPPLE-1/8" X 6" SS
NIPPLE-1/4" X 7/8" CLOSE SS
NIPPLE-1/4" X 1-1/2"SS
NIPPLE-1/4" X 2" SS
NIPPLE-1/4" X 2-1/2" SS
NIPPLE-1/4" X 3" SS
NIPPLE-1/4" X 3-1/2" SS
NIPPLE-1/4" X 4" SS
NIPPLE-1/4" X 5" SS
NIPPLE-1/4" X 6" SS
NIPPLE-3/8" CLOSE SS
NIPPLE-3/8" X 1-1/2" SS
NIPPLE-3/8" X 2" SS
NIPPLE-3/8" X 21/2" SS
NIPPLE-3/8" X 3" SS
NIPPLE-3/8" X 3-1/2" SS
NIPPLE-3/8" X 4" SS
NIPPLE-3/8" X 5" SS
NIPPLE-3/8" X 6" SS
NIPPLE-1/2" X CLOSE SS
NIPPLE-1/2" X 1-1/2" SS
NIPPLE-1/2" X 2" SS
NIPPLE-1/2" X 2-1/2" SS
NIPPLE-1/2" X 3" SS
NIPPLE-1/2" X 3-1/2" SS
NIPPLE-1/2" X 4" SS
NIPPLE-1/2" X 5" SS
NIPPLE-1/2" X 6" SS 712600
NIPPLE-3/4" X CLOSE SS
NIPPLE-3/4" X 1-1/2" SS
NIPPLE-3/4" X 2" SS
NIPPLE-3/4" X 3" SS
NIPPLE-3/4" X 4" SS
NIPPLE-3/4" X 6" SS
NIPPLE-1" X CLOSE SS
NIPPLE-1" X 2" SS
NIPPLE-1" X 2-1/2" SS
NIPPLE-1" X 3" SS
NIPPLE-1" X 4" SS
NIPPLE-1" X 6" SS
NIPPLE-1-1/4" X CLOSE SS
NIPPLE-1-1/4" X 2" SS
NIPPLE-1-1/4" X 3" SS
NIPPLE-1-1/4" X 4" SS
NIPPLE-1-1/2" X CLOSE SS
NIPPLE-1-1/2" X 2" SS
NIPPLE-1-1/2" X 2-1/2" SS
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
278-007780
278-007782
278-007784
278-007788
278-007794
278-007844
278-007846
278-007848
278-007850
278-007852
278-007853
278-007854
278-007856
278-007858
278-007908
278-007910
278-007912
278-007914
278-007916
278-007917
278-007918
278-007920
278-007922
278-007972
278-007974
278-007976
278-007978
278-007980
278-007981
278-007982
278-007984
278-007986
278-008036
278-008037
278-008038
278-008042
278-008044
278-008048
278-008062
278-008064
278-008066
278-008068
278-008072
278-008080
278-008098
278-008100
278-008104
278-008106
278-008160
278-008162
278-008164
373
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pipe and Accessories
Fittings
Stainless Steel
Fertilizer - Liquid
Nipples
PART NUMBER
278-008166
278-008167
278-008172
278-008194
278-008222
278-008224
278-008226
278-008227
278-008228
278-008229
278-008230
278-008288
278-008291
278-008294
278-008298
278-008299
278-008300
278-008320
278-008340
278-008390
278-008392
278-008394
278-008396
278-008402
278-008536
278-009000
278-009010
DESCRIPTION
NIPPLE-1-1/2" X 3" SS
NIPPLE-1-1/2" X 3-1/2" SS
NIPPLE-1-1/2" X 6" SS
NIPPLE-1-1/2" X 24" SS
NIPPLE-2" X CLOSE SS
NIPPLE-2" X 2-1/2" SS
NIPPLE-2" X 3" SS
NIPPLE-2" X 3-1/2" SS
NIPPLE-2" X 4" SS
NIPPLE-2" X 5" SS
NIPPLE-2" X 6" SS
NIPPLE-2" X 15" SS
NIPPLE-2" X 22" SS
NIPPLE-2" X 36" SS
NIPPLE-2" X 48" SS .
NIPPLE-2" X 60" SS
NIPPLE-2" X 72" SS
NIPPLE-2" X 84" SS
NIPPLE-3" X CLOSE SS
NIPPLE-3" X 3" SS
NIPPLE-3" X 4" SS
NIPPLE-3" X 5" SS
NIPPLE-3" X 6" SS
NIPPLE-3 X 15 SS
NIPPLE-3" X 36" SS
NIPPLE-4" X CLOSE SS
NIPPLE-4" X 4" SS
PART NUMBER
270-005460
270-005480
270-005490
270-005500
270-005505
270-005510
270-005520
270-005540
270-005560
270-005580
270-005900
DESCRIPTION
PLUG-1/8" SS
PLUG-1/4" SS
PLUG-3/8" SS
PLUG-1/2" SS
PLUG-3/4" SS
PLUG-1" SS
PLUG-1-1/4" SS
PLUG-1-1/2" SS
PLUG-2" SS
PLUG-3" SS
PLUG-4" SS
Plugs
374
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pipe and Accessories
Fittings
Stainless Steel
Reducers
PART NUMBER
270-052200
270-052240
270-052260
270-052280
270-052320
270-052340
270-052360
270-052380
270-052400
270-053310
270-053340
DESCRIPTION
REDUCER-BELL 1/8" X 1/4" SS
REDUCER-BELL 3/8" X 1/4" SS
REDUCER-BELL 1/2" X 1/4" SS
REDUCER-BELL 1/2" X 3/8" SS
REDUCER-BELL 3/4" X 1/2" SS
REDUCER-BELL 1" X 1/2" SS
REDUCER-BELL 1"X 3/4" SS
REDUCER-BELL 1-1/4" X 3/4" SS
REDUCER-BELL 1-1/2" X 1" SS
REDUCER-BELL 2" X 1-1/2" SS
REDUCER-BELL 2" X 1" SS
PART NUMBER
270-001280
270-001300
270-001320
270-001350
270-001360
270-001480
270-001400
270-001420
270-001500
DESCRIPTION
TEE-1/4" FPT SS
TEE-3/8" FPT SS
TEE-1/2" FPT SS
TEE-3/4" FPT SS
TEE-1" FPT SS
TEE-1-1/4" FPT SS
TEE-1-1/2" FPT SS
TEE-2" FPT SS
TEE-3" FPT SS
PART NUMBER
270-006680
270-006700
270-006720
270-006740
270-006760
270-006780
270-006800
DESCRIPTION
UNION-1/2" FPT SS
UNION-3/4" FPT SS
UNION-1" FPT SS
UNION-1-1/4" FPT SS
UNION-1-1/2" FPT SS
UNION-2" FPT SS
UNION-3" FPT SS
Tees
Fertilizer - Liquid
Unions
www.feiinc.com
375
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Sealant
Fertilizer - Liquid
Rectorseal® Number 5 - Color yellow, slow dry, soft set pipe thread compound.
Features:
•
• Applicable for use on threaded PVC, steel, iron, copper
and fiberglass reinforced pipe up to 1-1/4".
•
• Non-seizing breaks out easily without stripping, galling
or damaging threads.
•
• Brushable to plus 20º F.
•
Pressure range gases to 2,600 psi, liquids to 12,000
psi.
Temperatures minus 50º F. to plus 400º F.
LP and NH3 vapor only max 125 PSI.
Brush top can.
Rectorseal® Number 21 is compounded scientifically from 13 carefully chosen ingredients, making it a dependable sealant for lines
carrying numerous types of liquids and gases, including anhydrous ammonia. It is especially applicable for threaded PVC, steel, iron,
copper, and fiberglass reinforced pipe.
Features:
• Soft setting
• Black in color
• Multi-purpose
• Brush top applicator
• LP and NH3 vapor only Max 125 PSI.
• Non-toxic
• Does not dry out in the can
• Versatile
• Lubricates threads
Rectorseal® Tru-Blu™ pipe thread sealant with PTFE is a fast dry, flexible set thread sealant designed for high vibration environments
such as refrigeration and industrial applications. PTFE has been added to enhance thread lubrication during assembly and break out.
Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass, reinforced
PVC and CPVC pipe up to 1-1/4". Great for use as a positive lock and seal on threaded fasteners. Conforms to Federal Spec TT-S-1732.
Available in 1/2 pint or pint size brush top cans.
Liquid Teflon Sealant - Easy application liquid Teflon® for fast thread sealing. Handy 2 ounce tube or larger cans with dauber
applicator. Note: Not recommended for polypropylene fittings.
PLS® Premium Thread and Gasket Sealant - Smooth, non-hardening, opaque gray paste adheres readily to iron, stainless steel,
aluminum, monel, plastics and synthetic rubber compounds. Sets immediately, dries to touch within 24 hours. Brush on to seal pipe
joints, plugs, screwed fittings and gasketed connections in steam systems, refineries, gas service, refrigeration systems and chemical
plants. Spreads evenly, adheres firmly, no dripping, no run off. Apply once to seal permanently, yet connection can be easily
disassembled. Won’t wash out or crack from vibration, expansion or contraction. Prevents seizing, galling, rust and corrosion, and is UL
approved. Excellent resistance to dilute acids, aliphatic solvents, ammonia, dilute caustic alkali, chlorine, diesel fuel, gasoline, kerosene,
jet fuel, LP gas, natural gas, petroleum solvents, heating oils, hydraulic oils, mineral oils, refrigerants and steam. Temperature range: -50º
F. to 400º F. Pressure range: to 3,000 psi for gases, 8,000 psi for liquids. Flash point: 110º F. to (44º C.). (Pensky-Martin CC).
Continental LED-Plate Number 250 is highly impregnated with pure lead in permanent suspension. It penetrates the minute interstices
of the thread surface forming an armored coating that actually plates the thread so that galling can never occur.
376
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Pipe and Accessories
Sealant
Blue Monster PTFE Thread Seal Tape is a higher quality PTFE sealing tape that is easier to apply. It has not been stretched during
manufacturing, so it is thicker and creates a more effective seal with less tape, and no need for pipe dope. Use on threads made from
galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more.
Blue Monster Industrial Grade Pipe Thread Compound is a slow drying, soft setting, non-hardening pipe thread compound.
Formulated with superb sticking characteristics, it applies evenly and quickly to threads. Recommended for onsite or assembly line work,
it is lead free, non-toxic and will not harden or separate in the can.
DESCRIPTION
SEALANT-#5 1-3/4 OZ TUBE RECTORSEAL
SEALANT-#5 1/4 PT RECTORSEAL
SEALANT-#5 1/2 PT RECTORSEAL
SEALANT-#5 PT RECTORSEAL
SEALANT-#21-1/2 PT RECTORSEAL
SEALANT-#21 PT RECTORSEAL
SEALANT-TRU BLUE 1/2 PT
SEALANT-TRU BLU PT
SEALANT-#250 1 LB LED-PLATE 100000 PSI LIQUID +2987 DEG F
SEALANT-2 OZ LIQUID TEFLON 8000 PSI LIQUID -50/+400 DEG F
SEALANT-4 OZ LIQUID TEFLON 8000 PSI LIQUID -50/+400 DEG F
SEALANT-8 OZ LIQUID TEFLON 8000 PSI LIQUID -50/+400 DEG F
SEALANT-THREAD PLS2 1/4 PT 10000 PSI LIQUID -200/+550 DEG
SEALANT-THREAD PLS2 1 PT 10000 PSI LIQUID -200/+550 DEG
TAPE-TEFLON 1/2" X 520"
TAPE-TEFLON 1/2" X 260" YELLOW
TAPE-THREAD SEAL 1/2" X 260" MINI-MONSTER
TAPE-THREAD SEAL 3/4" X 260" MINI-MONSTER
TAPE-THREAD SEAL 1" X 260" MINI-MONSTER
SEALANT-BLUE MONSTER 1/2 PINT
Fertilizer - Liquid
PART NUMBER
LP-RE25790
LP-RE25631
LP-RE25551
LP-RE25431
LP-RE28651
LP-RE28541
LP-RE31551
LP-RE31431
FE570
LT2
LT4
LT8
LP-PB04
LP-PB16
LP-LA44082
LP-LA44082-Y
70660
70662
70664
76011
Pipe Wrap and Primer
Wonder Wrap Tape is sticky, stretches just right, and won’t tear or unravel. It comes in 2" and 4"
rolls. There are plenty of pipe wrap tapes on the market but it is hard to beat Wonder Tape. It is UPC
Approved/ IAPMO Listed, provides excellent insulation with a durable polyethylene backing. It is
ideal for iron and steel and is corrosion resistant. It has a super tack adhesion for extra holding
power. It is used a lot by underground pipe contractors and plumbers to protect iron and steel pipe
from corrosion due to high acidic or “hot soils”. It is also used to protect PVC pipe from corrosion
due to ultraviolet rays in above ground installations.
Polyken Liquid Adhesive #1027 is ideal for hand brush applications to rough, reconditioned or
grit blasted pipe surfaces. It provides a uniformly smooth, instant tack surface.
PART NUMBER
846-001260
846-001280
846-001890
DESCRIPTION
WRAP-PIPE 2" X 100' ROLL
WRAP-PIPE 4" X 100' ROLL
PRIMER-PIPE QUART
www.feiinc.com
377
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Inductors and Inductor Systems
Chemical Inductors
Fertilizer - Liquid
Chemical inductor (Dry or Liquid) FEM100 and FEM300
Features:
• Handles dry flowable products and liquids.
• Self-contained, portable system.
• Specially designed inductor valve.
• Poly cone bottom tank; 20 or 30 gallon.
Chemical inductor — injection system FEM200
Features:
• 30 gallon poly cone bottom tank with stand and large
stable base.
• Hypro pump with 1-1/2" NPT inlet/outlet 1-1/2 HP
motor 3450 RPM single phase.
•
•
•
Heavy duty polypropylene manifold fittings.
Built-in rinse system.
2" NPT inlet, 2" NPT outlet.
•
1" bypass line with 1" union valve, so you can flush
out the tank.
Heavy duty poly Banjo fittings and valves.
•
Handler II 85-H22 and 85-H23 have a capacity of 42 US gallons (160 liters) and 2" or 3" connection sizes. The Handler II allows the user
to batch mix everything from liquids to dry products and powders, as well as directly induct chemical into the sprayer. The unit comes
standard with the ability to draw directly from bulk containers using the double venturi. The Handler II has a standard single nozzle
agitation system for mixing dry formulations and assisting in tank cleaning. It is available with or without the integrated pump and pump
platform.
The Handler III 85-H32 and 85-H33 are available with 2" or 3" connections. The 70 gallon (275 liter) capacity of this unit allows the user
to batch mix everything from liquids to dry flowable and powders, as well as directly induct chemical through a venturi while the sprayer is
being filled. The Handler III comes standard with the ability to draw directly from bulk containers using the Handler double venturi. The
Handler III is available with or without an integrated pump and comes with the RotaCraft tank rinse nozzle to prevent contamination of
products. It also has a standard single nozzle agitation system for mixing dry formulations.
PART NUMBER
FEM100
FEM200
FEM300
85-H22
85-H23
85-H32
85-H33
378
DESCRIPTION
INDUCTOR SYSTEM-DRY/LIQUID W/20 GAL POLY TANK
INDUCTOR SYSTEM-30 GAL TANK W/PUMP AND STAND
INDUCTOR SYSTEM-DRY/LIQUID W/30 GAL POLY TANK 2" IN/OUT
INDUCTOR SYSTEM-HANDLER II 2" CONNECTIONS 42 GAL
INDUCTOR SYSTEM-HANDLER II 3" CONNECTIONS 42 GAL
INDUCTOR SYSTEM-HANDLER III 2" CONNECTIONS 70 GAL
INDUCTOR SYSTEM-HANDLER III 3" CONNECTIONS 70 GAL
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Inductors and Inductor Systems
Inductor Tanks and Stands
Tru-Kleen Chemical Inductor Tanks
Features:
• 16" Vented Lid
• Stand is Drilled and Ready to be Bolted Down
2" Male Threaded Snout (No Bulk-Head Fittings)
Sizes available: 20, 30, 40, 65, 100 and 200 gallon.
DESCRIPTION
TANK-INDUCTOR 20 GAL POLY TRU-KLEEN 18" DIA
TANK-INDUCTOR 30 GAL POLY TRU-KLEEN 18" DIA
STAND-TANK 20/30 INDUCTOR
BASE PLATE-STEEL 31" X 31" CRIMPED FOR FEM200
TANK-INDUCTOR 40 GAL POLY TRU-KLEEN 28" DIA
STAND-TANK TRU KLEEN 40 OR 65 GALLON INDUCTOR MAGNUM SHORT
TANK-INDUCTOR 65 GAL POLY TRU-KLEEN MAGNUM 28" DIA
TANK-INDUCTOR 100 GAL POLY
STAND-TANK 100 GAL INDUCTOR
LID-INDUCTOR 12"
PLATE-VORTEX FOR TK20 OR TK30
PLATE-ANTI-VORTEX 40 GAL & 65 GAL TANK
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
CRM0020
CRM0030
CRM6020-0015
FEM200-BASE
TK40
TKS40
TK65M
TK100M
TKS100M
LID-12-IND
TKV20
TKV40
•
•
379
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Inductors and Inductor Systems
Banjo Inductor System
Fertilizer - Liquid
The Banjo manifold inductor system draws wettable powders from inductor tank for thorough chemical mixing. The manifold venture
system is installed after the pump and suction completely empties the inductor tank. The tank is kept free of chemicals. Assembly and
installation are made easy with manifold connection. Available in 2" and 3" full port flow.
Polypropylene inductors are glass reinforced and have threaded or manifold ends. NOTE: The inductor is designed for use with a volume
pump. Typical volumes and pressures used to operate the venture would be in the 80 to 240 gpm range at pressures from 26 to 52 psi.
Each inductor comes in two pieces.
PART NUMBER
HV150
HV200
MHV200
MHV220
MIS220AA
MIS220AAK
MIS220FTA
MIS220HBAK
MIS300AA
MIS300BRB
380
DESCRIPTION
INDUCTOR-POLY VENTURI 1-1/2" MPT
INDUCTOR-POLY VENTORI 2" MPT
INDUCTOR-POLY MFLD VENTURI 2" W/1-1/2" PORT
INDUCTOR-POLY MFLD VENTURI 2" FP
INDUCTOR ASSY-MFLD 2" FP ML AXA ASSEMBLED
INDUCTOR-ASSY MFLD 2" FP ML AXA ASSY REQUIRED
INDUCTOR-ASSY MFLD 2" FP FML AXA ASSEMBLED
INDUCTOR ASSY-MFLD 2" FP HB X A
INDUCTOR ASSY-MFLD 3" FP ML AXA
INDUCTOR-ASSY 3" FP BRB X BRB ASSEMBLED
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Air Induction Flat Spray - AI
Fertilizer - Liquid
www.feiinc.com
381
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Air Induction Flat Spray - AI
Fertilizer - Liquid
Typical Applications:
• Best for pre-emerge surface applied herbicides – minimum spray pressure of 40 PSI.
• Best for post-emerge contact herbicides typical pressure of 80 PSI and higher.
Features:
• Stainless steel insert procedures tapered edge flat spray pattern for uniform coverage in broadcast spraying.
• Polymer insert holder and pre-orifice with VisiFlo color-coding.
• Large droplets for less drift.
• Bigger drops burst on target area forming smaller drops to give better coverage and penetration.
• Depending on the chemical, the AI TeeJet produces large air-filled drops through the use of Venturi air aspirator.
PART NUMBER
AI110015VS
AI11002VS
AI110025VS
AI11003VS
AI11004VS
AI11005VS
AI11006VS
AI11008VS
AI8004VS
382
DESCRIPTION
TIP-SPRAY TEEJET AIR INDUCTION FLAT 110DEG SS GREEN
TIP-SPRAY TEEJET AIR INDUCTION FLAT 110DEG SS YELLOW
TIP-SPRAY TEEJET AIR INDUCTION FLAT 110DEG SS PURPLE
TIP-SPRAY TEEJET AIR INDUCTION FLAT 110DEG SS BLUE
TIP-SPRAY FEEJET AIR INDUCTION FLAT 110DEG SS RED
TIP-SPRAY TEEJET AIR INDUCTION FLAT 110DEG SS BROWN
TIP-SPRAY TEEJET AIR INDUCTION FLAT 110DEG SS GRAY
TIP-SPRAY TEEJET AIR INDUCTION FLAT 110DEG SS WHITE
TIP-SPRAY TEEJET AIR INDUCTION FLAT 80DEG SS RED
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Air Induction Flat Spray - AIC
Typical Applications:
• Best for pre-emerge surface applied herbicides – minimum spray pressure of 40 PSI.
• Best for post-emerge contact herbicides typical pressure of 80 PSI and higher.
Features:
• Produces a 110º tapered edge flat spray pattern for uniform coverage in broadcast spraying applications.
• Available with a polymer insert holder with stainless steel.
• Larger droplets for less drift.
• Depending on the chemical, produces large air filled drops through the use of a venture air aaspirator.
• AI TeeJet nozzle molded into Quick TeeJet cap provides automatic spray alignment.
• Includes tightly fitting washer that stays put and assures a good seal.
• Recommended pressure rating 30-115 psi (2-8 bar).
Fertilizer - Liquid
PART NUMBER
AIC110015-VS
AIC11002-VS
AIC110025-VK
AIC110025-VS
AIC11003-VS
AIC11003-VK
AIC11004-VK
AIC11004-VP
AIC11004-VS
AIC11005-VK
AIC11006-VS
AIC11010-VS
AIC11015-VS
DESCRIPTION
TIP-SPRAY TEEJET AIR INDUCTION FLAT 110DEG SS GREEN
TIP-SPRAY TEEJET AIR INDUCTION FLAT 110DEG SS YELLOW
TIP-SPRAY TEEJET AIR INDUCTION FLAT 110DEG CERAMIC VIOLET
TIP-SPRAY TEEJET AIR INDUCTION FLAT 110DEG SS VIOLET
TIP-SPRAY TEEJET AIR INDUCTION FLAT 110DEG SS BLUE
TIP-SPRAY TEEJET AIR INDUCTION FLAT 110DEG CERAMIC BLUE
TIP-SPRAY TEEJET AIR INDUCTION FLAT 110DEG CERAMIC RED
TIP-SPRAY TEEJET AIR INDUCTION FLAT 110DEG POLY RED
TIP-SPRAY TEEJET AIR INDUCTION FLAT 110DEG SS RED
TIP-SPRAY TEEJET AIR INDUCTION FLAT 110DEG CERAMIC BROWN
TIP-SPRAY TEEJET AIR INDUCTION FLAT 110DEG SS GRAY
TIP-SPRAY TEEJET AIR INDUCTION FLAT 110DEG SS LIGHT BLUE
TIP-SPRAY TEEJET AIR INDUCTION FLAT 110DEG SS LIGHT GREEN
www.feiinc.com
383
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Air Induction XR Flat Spray
Fertilizer - Liquid
Features:
• 110º wide, tapered flat spray angle with air induction technology offers better drift management.
• Made of a two piece UHMWPE polymer construction with VisiFlo color coding. UHMPE provides
excellent chemical resistance, including acids, as well as exceptional wear life.
• Compact size to prevent tip damage.
• Depending on the chemical, produces large air filled drops through a Venturi air aspirator.
• Removable pre-orifice.
• Available in seven tip capacities with a wide operating pressure range: 15-90 psi (1-6 bar).
• Automatic alignment when used with 25612-*-NYR Quick TeeJet cap and gasket.
PART NUMBER
AIXR110015VP
AIXR11002VP
AIXR110025VP
AIXR11003VP
AIXR11004VP
AIXR11005VP
AIXR11006VP
384
DESCRIPTION
TIP-SPRAY TEEJET AIR INDUCTION XR FLAT 110DEG POLY GREEN
TIP-SPRAY TEEJET AIR INDUCTION XR FLAT 110DEG POLY YELLOW
TIP-SPRAY TEEJET AIR INDUCTION XR FLAT 110DEG POLY PURPLE
TIP-SPRAY TEEJET AIR INDUCTION XR FLAT 110DEG POLY BLUE
TIP-SPRAY TEEJET AIR INDUCTION XR FLAT 110DEG POLY RED
TIP-SPRAY TEEJET AIR INDUCTION XR FLAT 110DEG POLY BROWN
TIP-SPRAY TEEJET AIR INDUCTION XR FLAT 110DEG POLY GRAY
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Air Induction Turbo Twinjet
Features:
• Air induction with dual 110º flat fan patterns.
• 60º between leading and trailing spray patterns.
• Good coverage with increased canopy penetration and best drift control.
• Best suited for post emergence applications.
• Excellent drift control with coarse to very coarse droplets.
• Available in six VisiFlo color coded capacities (02 through 06), color represents total flow.
• Pressure ranges from 20-90 psi (1.5-6 bar).
DESCRIPTION
TIP-SPRAY TEEJET AIR INDUCTION TWIN FLAT 110DEG POLY YELLOW
TIP-SPRAY TEEJET AIR INDUCTION TWIN FLAT 110DEG POLY PURPLE
TIP-SPRAY TEEJET AIR INDUCTION TWIN FLAT 110DEG POLY BLUE
TIP-SPRAY TEEJET AIR INDUCTION TWIN FLAT 110DEG POLY RED
TIP-SPRAY TEEJET AIR INDUCTION TWIN FLAT 110DEG POLY BROWN
TIP-SPRAY TEEJET AIR INDUCTION TWIN FLAT 110DEG POLY GREY
TIP-SPRAY TEEJET AIR INDUCTION TWIN FLAT 110DEG POLY WHITE
TIP-SPRAY TEEJET AIR INDUCTION TWIN FLAT 110DEG POLY LT BLUE
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
AITTJ60-11002VP
AITTJ60-110025VP
AITTJ60-11003VP
AITTJ60-11004VP
AITTJ60-11005VP
AITTJ60-11006VP
AITTJ60-11008VP
AITTJ60-11010VP
385
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Fertilizer - Liquid
Air Induction Dual Pattern Flat Spray
Features:
• Provides excellent penetration and seed head coverage for fungicide spraying on cereal
crops.
• AI3070 produces two wide angle, flat spray patterns for uniform coverage in broadcast
applications.
• 30º forward tilted spray penetrates dense crop canopies, while the backward tilted 70º
spray maximizes coverage of the crop seed head.
•
Drift resistant drops are produced through the use of a venture air aspirator.
• All acetal construction for excellent chemical and wear resistance.
• Removable pre-orifice for fast and easy cleaning.
• Suggested spray pressure range of 20-90 psi (1.5-6 bar).
PART NUMBER
AI3070-015VP
AI3070-015VP-C
AI3070-02VP
AI3070-02VP-C
AI3070-025VP
AI3070-03VP
AI3070-03VP-C
AI3070-04VP
AI3070-04VP-C
AI3070-05VP
AI3070-05VP-C
386
DESCRIPTION
TIP-SPRAY TEEJET AIR INDUCTION DUAL 30/70DEG GREEN
TIP-SPRAY TEEJET AIR INDUCTION DUAL 30/70DEG GREEN W/CAP
TIP-SPRAY TEEJET AIR INDUCTION DUAL 30/70DEG YELLOW
TIP-SPRAY TEEJET AIR INDUCTION DUAL 30/70DEG YELLOW W/CAP
TIP-SPRAY TEEJET AIR INDUCTION DUAL 30/70DEG VIOLET
TIP-SPRAY TEEJET AIR INDUCTION DUAL 30/70DEG BLUE
TIP-SPRAY TEEJET AIR INDUCTION DUAL 30/70DEG BLUE W/CAP
TIP-SPRAY TEEJET AIR INDUCTION DUAL 30/70DEG RED
TIP-SPRAY TEEJET AIR INDUCTION DUAL 30/70DEG RED W/CAP
TIP-SPRAY TEEJET AIR INDUCTION DUAL 30/70DEG BROWN
TIP-SPRAY TEEJET AIR INDUCTION DUAL 30/70DEG BROWN W/CAP
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Boomless Flat Spray - XP BoomJet
TYPICAL APPLICATIONS:
• Boomless field spray applications.
• Roadside and right of way applications.
• End row spraying.
PART NUMBER
1/4XP10L-VP
1/4XP10R-VP
1/4XP20L-VP
1/4XP20R-VP
1/4XP25L-VP
1/4XP25R-VP
1/2XP40L-VP
1/2XP40R-VP
1/2XP80L-VP
1/2XP80R-VP
Orchard spraying.
De-icing applications.
Forestry.
•
Acetal or stainless steel construction for excellent
chemical resistance.
Recommended spray pressure range: 20 - 60 psi (1.5
- 4 bar).
NPT or BSPT (male) threads for easy installation.
Color coding for easy capacity identification.
•
•
•
DESCRIPTION
NOZZLE-SPRAY BOOMJET BOOMLESS FLAT 10DEG POLY ORANGE LH
NOZZLE-SPRAY BOOMJET BOOMLESS FLAT 10DEG POLY ORANGE RH
NOZZLE-SPRAY BOOMJET BOOMLESS FLAT 20DEG POLY YELLOW LH
NOZZLE-SPRAY BOOMJET BOOMLESS FLAT 20DEG POLY YELLOW RH
NOZZLE-SPRAY BOOMJET BOOMLESS FLAT 25DEG POLY PURPLE LH
NOZZLE-SPRAY BOOMJET BOOMLESS FLAT 25DEG POLY PURPLE RH
NOZZLE-SPRAY BOOMJET BOOMLESS FLAT POLY RED LH
NOZZLE-SPRAY BOOMJET BOOMLESS FLAT POLY RED RH
NOZZLE-SPRAY BOOMJET BOOMLESS FLAT POLY WHITE LH
NOZZLE-SPRAY BOOMJET BOOMLESS FLAT POLY WHITE RH
www.feiinc.com
387
Fertilizer - Liquid
FEATURES:
• Unique orifice geometry produces wide spray pattern
while maintaining superior distribution across entire
width.
• Pre-orifice design minimizes drift.
• Extra wide spray pattern - up to 18.5 feet (5.5 meters)
- using a single nozzle.
• Removable polymer pre-orifice.
•
•
•
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Fertilizer - Liquid
Drift Guard Flat
Typical Applications:
• Best for pre-emerge surface applied herbicides.
• Best for post-emerge systemic herbicide.
Features:
• Pre-orifice design produces large droplets to reduce drift.
• Ideal for banding over the row or in row middles.
• Provides uniform distribution throughout the flat spray pattern.
• Easily mounted on spray boom or planter.
• Stainless steel with VisiFlo color coding.
NOTE: Due to the pre-orifice design, this tip is not compatible with the 4193A check valve.
PART NUMBER
DG80015VS
DG8002VS
DG8003VS
DG8004VS
DG110015VS
DG11002VS
DG11003VS
DG11004-VS
388
DESCRIPTION
TIP-SPRAY TEEJET DRIFT GUARD FLAT 80DEG SS GREEN
TIP-SPRAY TEEJET DRIFT GUARD FLAT 80DEG SS YELLOW
TIP-SPRAY TEEJET DRIFT GUARD FLAT 80DEG SS BLUE
TIP-SPRAY TEEJET DRIFT GUARD FLAT 80DEG SS RED
TIP-SPRAY TEEJET DRIFT GUARD FLAT 110DEG SS GREEN
TIP-SPRAY TEEJET DRIFT GUARD FLAT 110DEG SS YELLOW
TIP-SPRAY TEEJET DRIFT GUARD FLAT 110DEG SS BLUE
TIP-SPRAY TEEJET DRIFT GUARD FLAT 110DEG SS RED
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Extended Range Flat
Features:
• Excellent spray distribution over a wide range of pressures of 15-60 psi (1-4 bar).
• Ideal for use with sprayer controllers.
• Reduces drift at lower pressures, better coverage at higher pressures.
• Available in stainless steel, ceramic and polymer in 80º and 110º spray angles with VisiFlo color coding.
• Ceramic is available with corrosive resistant polypropylene VisiFlo color coded tip holder in 80º capacities 03-08 and 110º
capcities 02-08.
DESCRIPTION
TIP-SPRAY TEEJET EXT RANGE FLAT 80DEG SS ORANGE
TIP-SPRAY TEEJET EXT RANGE FLAT 80DEG SS GREEN
TIP-SPRAY TEEJET EXT RANGE FLAT 80DEG SS YELLOW
TIP-SPRAY TEEJET EXT RANGE FLAT 80DEG SS PURPLE
TIP-SPRAY TEEJET EXT RANGE FLAT 80DEG SS BLUE
TIP-SPRAY TEEJET EXT RANGE FLAT 80DEG SS RED
TIP-SPRAY TEEJET EXT RANGE FLAT 80DEG SS BROWN
TIP-SPRAY TEEJET EXT RANGE FLAT 80DEG SS GRAY
TIP-SPRAY TEEJET EXT RANGE FLAT 80DEG SS WHITE
TIP-SPRAY TEEJET EXT RANGE FLAT 80DEG SS
TIP-SPRAY TEEJET EXT RANGE FLAT 80DEG SS
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG SS ORANGE
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG SS GREEN
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG SS YELLOW
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG CERAMIC YELLOW
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG CERAMIC PURPLE
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG SS BLUE
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG CERAMIC BLUE
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG CERAMIC RED
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG SS RED
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG POLY RED
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG SS BROWN
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG POLY BROWN
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG CERAMIC BROWN
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG SS GRAY
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG POLY WHITE
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG SS WHITE
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG CERAMIC WHITE
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG SS
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG SS
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
XR8001VS
XR80015VS
XR8002VS
XR80025VS
XR8003VS
XR8004VS
XR8005VS
XR8006VS
XR8008VS
XR8010SS
XR8015SS
XR11001VS
XR110015VS
XR11002VS
XR11002-VK
XR110025VK
XR11003VS
XR11003-VK
XR11004VK
XR11004VS
XR11004VP
XR11005VS
XR11005VP
XR11005-VK
XR11006VS
XR11008VP
XR11008VS
XR11008-VK
XR11010SS
XR11015SS
389
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Extended Range Flat with Cap
Fertilizer - Liquid
Features:
• Excellent spray distribution over a wide range of pressures of 15-60 psi (1-4 bar).
• Ideal for use with sprayer controllers.
• Reduces drift at lower pressures, better coverage at higher pressures.
• 80º available in stainless steel (015, 02, 03-06 capacities) and ceramic (02, 03-08 capacities).
• 110º available in stainless steel (025-05 capacities), ceramic (02-08 capacities) and polymer (025-20 capacities).
• XR TeeJet tip molded into Quick TeeJet cap provides automatic alignment.
• Includes tightly fitting washer that stays put and assures a good seal.
PART NUMBER
XRC80015-VS
XRC8002-VS
XRC8003-VK
XRC8003-VS
XRC8004-VS
XRC8005-VS
XRC8006-VS
XRC8008-VK
XRC11002-VK
XRC110025-VK
XRC110025-VP
XRC11003-VK
XRC11003-VS
XRC11004-VS
XRC11004-VK
XRC11005-VS
XRC11005-VK
XRC11006-VK
XRC11008-VK
XRC11015-VP
390
DESCRIPTION
TIP-SPRAY TEEJET EXT RANGE FLAT 80DEG SS GREEN
TIP-SPRAY TEEJET EXT RANGE FLAT 80DEG SS YELLOW
TIP-SPRAY TEEJET EXT RANGE FLAT 80DEG CERAMIC BLUE
TIP-SPRAY TEEJET EXT RANGE FLAT 80DEG SS BLUE
TIP-SPRAY TEEJET EXT RANGE FLAT 80DEG SS RED
TIP-SPRAY TEEJET EXT RANGE FLAT 80DEG SS BROWN
TIP-SPRAY TEEJET EXT RANGE FLAT 80DEG SS GREY
TIP-SPRAY TEEJET EXT RANGE FLAT 80DEG CERAMIC WHITE
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG CERAMIC YELLOW
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG CERAMIC PURPLE
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG POLY PURPLE
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG CERAMIC BLUE
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG SS BLUE
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG SS RED
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG CERAMIC RED
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG SS BROWN
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG CREAMIC BROWN
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG CERAMIC GRAY
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG CERAMIC WHITE
TIP-SPRAY TEEJET EXT RANGE FLAT 110DEG POLY LIGHT GREEN
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Even Flat
Features:
• Ideal for banding over the row or in row middles.
• Provides uniform distribution throughout the flat spray pattern.
• Easily mounted on spray boom or planter.
• Available with VisiFlo color coding in stainless steel or all stainless steel, hardened stainless steel and brass.
DESCRIPTION
TIP-SPRAY TEEJET BRASS
TIP-SPRAY TEEJET EVEN FLAT 40DEG BRASS
TIP-SPRAY TEEJET EVEN FLAT 40DEG BRASS
TIP-SPRAY TEEJET EVEN FLAT 40DEG BRASS
TIP-BRASS
TIP-BRASS
TIP-SPRAY TEEJET EVEN FLAT 65DEG BRASS
TIP-SPRAY TEEJET EVEN FLAT 65DEG BRASS
TIP-SPRAY TEEJET EVEN FLAT 65DEG BRASS
TIP-SPRAY TEEJET EVEN FLAT 80DEG BRASS
TIP-SPRAY TEEJET EVEN FLAT 95DEG BRASS ORANGE
TIP-SPRAY TEEJET EVEN FLAT 40DEG SS
TIP-SPRAY TEEJET EVEN FLAT 40DEG SS
TIP-SPRAY TEEJET EVEN FLAT 40DEG SS
TIP-SPRAY TEEJET EVEN FLAT 40DEG SS
TIP-SPRAY TEEJET EVEN FLAT 40DEG SS
TIP-SPRAY TEEJET EVEN FLAT 80DEG SS ORANGE
TIP-SPRAY TEEJET EVEN FLAT 80DEG SS GREEN
TIP-SPRAY TEEJET EVEN FLAT 80DEG SS YELLOW
TIP-SPRAY TEEJET EVEN FLAT 80DEG SS BLUE
TIP-SPRAY TEEJET EVEN FLAT 80DEG SS RED
TIP-SPRAY TEEJET EVEN FLAT 80DEG SS BROWN
TIP-SPRAY TEEJET EVEN FLAT 80DEG SS GRAY
TIP-SPRAY TEEJET EVEN FLAT 80DEG SS WHITE
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
TP40002E
TP4001E
TP40015E
TP4004E
TP4006E
TP4010E
TP6501E
TP6502E
TP6503E
TP8002E
TP9501E
TP40015E-SS
TP4001E-SS
TP4002E-SS
TP4003E-SS
TP4004E-SS
TP8001EVS
TP80015EVS
TP8002EVS
TP8003EVS
TP8004EVS
TP8005EVS
TP8006EVS
TP8008EVS
391
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Off-Center Flat Spray
Fertilizer - Liquid
TeeJet Off-Center spray tips are commonly installed in double and single swivel nozzle bodies. Because these bodies are adjustable for
angular position, a wide spray swath is easily obtained.
PART NUMBER
OC-02
OC-03
OC-04
OC-06
OC-10
OC-20
OC-40
OC-SS01
OC-SS02
OC-SS03
OC-SS04
OC-SS06
OC-SS08
OC-SS12
OC-SS16
OC-SS20
OC-SS40
392
DESCRIPTION
TIP-SPRAY TEEJET OFF CENTER FLAT BRASS
TIP-SPRAY TEEJET OFF CENTER FLAT BRASS
TIP-SPRAY TEEJET OFF CENTER FLAT BRASS
TIP-SPRAY TEEJET OFF CENTER FLAT BRASS
TIP-SPRAY TEEJET OFF CENTER FLAT BRASS
TIP-SPRAY TEEJET OFF CENTER FLAT BRASS
TIP-SPRAY TEEJET OFF CENTER FLAT BRASS
TIP-SPRAY TEEJET OFF CENTER FLAT SS
TIP-SPRAY TEEJET OFF CENTER FLAT SS
TIP-SPRAY TEEJET OFF CENTER FLAT SS
TIP-SPRAY TEEJET OFF CENTER FLAT SS
TIP-SPRAY TEEJET OFF CENTER FLAT SS
TIP-SPRAY TEEJET OFF CENTER FLAT SS
TIP-SPRAY TEEJET OFF CENTER FLAT SS
TIP-SPRAY TEEJET OFF CENTER FLAT SS
TIP-SPRAY TEEJET OFF CENTER FLAT SS
TIP-SPRAY TEEJET OFF CENTER FLAT SS
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
StreamJet SJ3 Fertilizer
Typical Applications:
• Excellent for application of liquid fertilizer on bare ground or in standing crop.
• Three stream pattern is ideal for directed application.
Features:
• VisiFlo color coding system.
• All acetal construction for excellent chemical
resistance.
• Three solid streams of equal velocity and capacity.
• Recommended operating pressure 20-60 psi (1.5-4
• Removable metering orifice for easy cleaning.
bar).
• Ten sizes for a wide range of application rates.
• Solid stream pattern minimizes leaf burn and virtually
• Equally spaced distribution at 20" (50 cm) height.
eliminates drift.
PART NUMBER
SJ3-015-VP
SJ3-02-VP
SJ3-03-VP
SJ3-04-VP
SJ3-05-VP
SJ3-06-VP
SJ3-08-VP
SJ3-10-VP
SJ3-15-VP
SJ3-20-VP
SJ3-VR
DESCRIPTION
NOZZLE-STREAMJET 3 STREAM GREEN
NOZZLE-STREAMJET 3 STREAM YELLOW
NOZZLE-STREAMJET 3 STREAM BLUE
NOZZLE-STREAMJET 3 STREAM RED
NOZZLE-STREAMJET 3 STREAM BROWN
NOZZLE-STREAMJET 3 STREAM GRAY
NOZZLE-STREAMJET 3 STREAM WHITE
NOZZLE-STREAMJET 3 STREAM LIGHT BLUE
NOZZLE-STREAMJET 3 STREAM LIGHT GREEN
NOZZLE-STREAMJET 3 STREAM BLACK
TIP-SPRAY VARIABLE RATE
www.feiinc.com
393
Fertilizer - Liquid
The TeeJet SJ3-VR features a variable diameter orifice that produces a wide range of flow rates, so you get more uses from
on tip. Improve productivity with a wider range of ground speeds and application rates. The SJ3-VR produces three identical
fluid streams, perfect for directed applications. Solid stream pattern minimizes leaf burn and virtually eliminates drift.
Intended for use with flow meter based control systems only.
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Fertilizer - Liquid
StreamJet SJ7 Fertilizer
•
•
Typical Applications:
• Excellent for application of liquid fertilizer on bare ground or in standing crop.
• Seven stream pattern is ideal for directed application.
Features:
• VisiFlo color coding for easy capacity identification.
• Creates seven identical fluid
streams of equal velocity and
• All acetal construction for excellent chemical
capacity.
resistance.
• Excellent spray distribution
• Recommended operating pressure 20-60 psi (1.5-4
quality.
bar).
Removable metering orifice for easy cleaning.
• Solid stream pattern minimizes leaf burn and virtually
eliminates drift.
Offered in a variety of sizes for a wide range of
application rates.
PART NUMBER
SJ7-015-VP
SJ7-02-VP
SJ7-03-VP
SJ7-04-VP
SJ7-05-VP
SJ7-06-VP
SJ7-08-VP
SJ7-10-VP
SJ7-15-VP
394
DESCRIPTION
NOZZLE-STREAMJET 7 STREAM GREEN
NOZZLE-STREAMJET 7 STREAM YELLOW
NOZZLE-STREAMJET 7 STREAM BLUE
NOZZLE-STREAMJET 7 STREAM RED
NOZZLE-STREAMJET 7 STREAM BROWN
NOZZLE-STREAMJET 7 STREAM GRAY
NOZZLE-STREAMJET 7 STREAM WHITE
NOZZLE-STREAMJET 7 STREAM LIGHT BLUE
NOZZLE-STREAMJET 7 STREAM LIGHT GREEN
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
StreamJet Solid Stream
Stainless Steel for Banding Fertilizers
• Permits banding fluids at high speeds.
• Large orifice with no internal obstructions, permit non-clogging suspension applications.
• Lower drift potential.
DESCRIPTION
NOZZLE-SPRAY STREAMJET SOLID STREAM SS
NOZZLE-SPRAY STREAMJET SOLID STREAM SS
NOZZLE-SPRAY STREAMJET SOLID STREAM SS
NOZZLE-SPRAY STREAMJET SOLID STREAM SS
NOZZLE-SPRAY STREAMJET SOLID STREAM SS
NOZZLE-SPRAY STREAMJET SOLID STREAM SS
NOZZLE-SPRAY STREAMJET SOLID STREAM SS
NOZZLE-SPRAY STREAMJET SOLID STREAM SS
NOZZLE-SPRAY STREAMJET SOLID STREAM SS
NOZZLE-SPRAY STREAMJET SOLID STREAM SS
TIP-SPRAY STREAMJET SOLID STREAM SS
TIP-SPRAY STREAMJET SOLID STREAM SS
TIP-SPRAY STREAMJET SOLID STREAM SS
TIP-SPRAY STREAMJET SOLID STREAM SS
TIP-SPRAY STREAMJET SOLID STREAM SS
TIP-SPRAY STREAMJET SOLID STREAM SS
TIP-SPRAY STREAMJET SOLID STREAM SS
TIP-SPRAY STREAMJET SOLID STREAM SS
TIP-SPRAY STREAMJET SOLID STREAM SS
TIP-SPRAY STREAMJET SOLID STREAM SS
TIP-SPRAY STREAMJET SOLID STREAM SS
TIP-SPRAY STREAMJET SOLID STREAM SS
TIP-SPRAY STREAMJET SOLID STREAM SS
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
H1/4U-SS0002
H1/4U-SS0003
H1/4U-SS0004
H1/4U-SS0005
H1/4U-SS0006
H1/4U-SS0008
H1/4U-SS0010
H1/4U-SS0015
H1/4U-SS0020
H1/4U-SS0050
TP0001-SS
TP00015-SS
TP0002-SS
TP0003-SS
TP0004-SS
TP0005-SS
TP0006-SS
TP0008-SS
TP0010-SS
TP0015-SS
TP0020-SS
TP0030-SS
TP0040-SS
395
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Fertilizer - Liquid
Turbo TeeJet Induction Flat
Features:
• 110º wide angle, air induction, tapered flat spray tip pattern based on the patented
outlet orifice design of the original Turbo TeeJet nozzle.
• Patented orifice design provides large, round passages to minimize plugging.
• Depending on the chemical, produces large air filled drops through a venture air
aspirator resulting in less drift.
• All polymer construction for excellent chemical and wear resistance.
• Compact size to prevent tip damage.
• Removable pre-orifice.
• Ideal for use with automatic sprayer controllers.
• Wide operating pressure range of 15-100 psi (1-7 bar).
NOTE: Due to the pre-orifice design, this tip is not compatible with the 4193A check valve.
PART NUMBER
TTI110015-VP
TTI11002-VP
TTI110025-VP
TTI11003-VP
TTI11004-VP
TTI11005-VP
TTI11006-VP
396
DESCRIPTION
TIP-SPRAY TURBO TEEJET IND FLAT 110DEG POLY GREEN
TIP-SPRAY TURBO TEEJET IND FLAT 110DEG POLY YELLOW
TIP-SPRAY TURBO TEEJET IND FLAT 110DEG POLY PURPLE
TIP-SPRAY TURBO TEEJET IND FLAT 110DEG POLY BLUE
TIP-SPRAY TURBO TEEJET IND FLAT 110DEG POLY RED
TIP-SPRAY TURBO TEEJET IND FLAT 110 DEG POLY BROWN
TIP-SPRAY TURBO TEEJET IND FLAT 110DEG POLY GRAY
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Turbo Wide Angle
Features:
• Tapered edge wide angle flat spray pattern for uniform coverage in broadcast spraying.
• Large, rounded internal passage to minimize clogging.
• Excellent resistance to corrosive solutions.
• Superior wear characteristics.
• Larger droplets for less drift 15-90 psi (1-6 bar).
• Unique internal configuration means substantially longer wear life.
DESCRIPTION
TIP-SPRAY TURBO TEEJET WIDE ANGLE FLAT 110DEG POLY ORANGE
TIP-SPRAY TURBO TEEJET WIDE ANGLE FLAT 110DEG POLY GREEN
TIP-SPRAY TURBO TEEJET WIDE ANGLE FLAT 110DEG POLY YELLOW
TIP-SPRAY TURBO TEEJET WIDE ANGLE FLAT 110DEG POLY PURPLE
TIP-SPRAY TURBO TEEJET WIDE ANGLE FLAT 110DEG POLY BLUE
TIP-SPRAY TURBO TEEJET WIDE ANGLE FLAT 110DEG POLY RED
TIP-SPRAY TURBO TEEJET WIDE ANGLE FLAT 110DEG POLY BROWN
TIP-SPRAY TURBO TEEJET WIDE ANGLE FLAT 110DEG POLY GRAY
TIP-SPRAY TURBO TEEJET WIDE ANGLE FLAT 110DEG POLY WHITE
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
TT11001-VP
TT110015-VP
TT11002-VP
TT110025-VP
TT11003-VP
TT11004-VP
TT11005-VP
TT11006-VP
TT11008-VP
397
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
TwinJet Even Flat
40º and 80º E Series
TwinJet even tips combine the advantages of twin flat spray patterns with even distribution across the pattern. The twin flat sprays
provide improved coverage of crop or weed without sacrificing uniformity. The smaller droplet size makes this tip ideal for providing a
thorough, penetrating coverage with post-emergence contact herbicides. These tips also provide good pre-emergence coverage on cloddy
fields and fields covered with crop residue.
Fertilizer - Liquid
Features:
• Ideal for banding over or between crop rows.
• Provides uniform distribution throughout the spray
pattern.
PART NUMBER
TJ60-4002EVS
TJ60-4003EVS
TJ60-4004EVS
TJ60-8003EVS
398
•
•
Available in 80º and 40º twin flat spray patterns.
Made of stainless steel with VisiFlo coding.
DESCRIPTION
TIP-SPRAY TWINJET EVEN FLAT 40DEG SS YELLOW
TIP-SPRAY TWINJET EVEN FLAT 40DEG SS BLUE
TIP-SPRAY TWINJET EVEN FLAT 40DEG SS RED
TIP-SPRAY TWINJET EVEN FLAT 80DEG SS BLUE
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Turbo TwinJet Flat
Features:
• Dual outlet design produces two 110º flat fan spray patterns using the patented technology from the
Turbo TeeJet nozzle.
• Best suited for broadcast spraying where superior leaf coverage and canopy penetration is important.
• Droplet size range is slightly larger than for the same capacity Turbo TeeJet nozzle providing drift
reducing properties with increased canopy coverage and penetration.
• Molded polymer for excellent chemical and wear resistance.
• Newly expanded series, now available in eight VisiFlo color coded capacities with pressure ranges
from 20-90 psi (1.5-6 bar).
• Ideal for use with automatic sprayer controllers.
DESCRIPTION
TIP-SPRAY TURBO TWINJET TWIN FLAT 110DEG POLY YELLOW
TIP-SPRAY TURBO TWINJET TWIN FLAT 110DEG POLY PURPLE
TIP-SPRAY TURBO TWINJET TWIN FLAT 110DEG POLY BLUE
TIP-SPRAY TURBO TWINJET TWIN FLAT 110DEG POLY RED
TIP-SPRAY TURBO TWINJET TWIN FLAT 110DEG POLY BROWN
TIP-SPRAY TURBO TWINJET TWIN FLAT 110DEG POLY BROWN W/CAP
TIP-SPRAY TURBO TWINJET TWIN FLAT 110DEG POLY GRAY
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
TTJ60-11002VP
TTJ60-110025-VP
TTJ60-11003-VP
TTJ60-11004-VP
TTJ60-11005-VP
TTJ60-11005VP-C
TTJ60-11006-VP
399
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
VisiFlo Flat
Fertilizer - Liquid
Features:
• Tapered edge flat spray pattern for uniform coverage in broadcast spraying.
• VisiFlo color coded version available in stainless steel, ceramic and polymer in 80º or 110º spray angles in selected sizes.
• Available in ceramic 80º capacities 01-02 and 110º capacities 01-015.
• Standard version (not color coded) available in 15º, 25º, 40º, 50º and 65º spray angles in brass, stainless steel or hardened
stainless steel.
PART NUMBER
TP8001VS
TP8020
TP8002VS
TP8003VS
TP8004VS
TP8006VS
TP8008VS
TP1002-VP
TP11002VS
TP11003VS
TP11004VS
TP11005VS
TP11006VS
TP80015VS
TP800050-SS
TP800067-SS
TP8004-SS
TP8006-SS
TP8010-SS
TP8020-SS
400
DESCRIPTION
TIP-SPRAY TEEJET VISIFLO FLAT 80DEG SS ORANGE
TIP-SPRAY TEEJET VISIFLO FLAT 80DEG BRASS
TIP-SPRAY TEEJET VISIFLO FLAT 80DEG SS YELLOW
TIP-SPRAY TEEJET VISIFLO FLAT 80DEG SS BLUE
TIP-SPRAY TEEJET VISIFLO FLAT 80DEG SS RED
TIP-SPRAY TEEJET VISIFLO FLAT 80DEG SS GRAY
TIP-SPRAY TEEJET VISIFLO FLAT 80DEG SS WHITE
TIP-SPRAY TEEJET VISIFLO FLAT 110 DEG POLY YELLOW
TIP-SPRAY TEEJET VISIFLO FLAT 110DEG SS YELLOW
TIP-SPRAY TEEJET VISIFLO FLAT 110DEG SS BLUE
TIP-SPRAY TEEJET VISIFLO FLAT 110DEG SS RED
TIP-SPRAY TEEJET VISIFLO FLAT 110DEG SS BROWN
TIP-SPRAY TEEJET VISIFLO FLAT 110DEG SS GRAY
TIP-SPRAY TEEJET VISIFLO FLAT 80DEG SS GREEN
TIP-SPRAY TEEJET VISIFLO FLAT 80DEG SS
TIP-SPRAY TEEJET VISIFLO FLAT 80DEG SS
TIP-SPRAY TEEJET VISIFLO FLAT 80DEG SS
TIP-SPRAY TEEJET VISIFLO FLAT 80DEG SS
TIP-SPRAY TEEJET VISIFLO FLAT 80DEG SS
TIP-SPRAY TEEJET VISIFLO FLAT 80DEG SS
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
TwinJet Twin Flat
Features:
• Penetrates crop residue or dense foliage.
• Smaller droplets for thorough coverage.
• Better spray distribution along boom than with hollow
cone nozzles.
•
Available in stainless steel with VisiFlo color coding in
65º, 80º and 110º spray angles.
Recommended pressure rating of 30-60 psi (2-4 bar).
DESCRIPTION
TIP-SPRAY TWINJET TWIN FLAT 65DEG SS PURPLE
TIP-SPRAY TWINJET TWIN FLAT 80DEG SS YELLOW
TIP-SPRAY TWINJET TWIN FLAT 80DEG SS BLUE
TIP-SPRAY TWINJET TWIN FLAT 80DEG SS RED
TIP-SPRAY TWINJET TWIN FLAT 80DEG SS BROWN
TIP-SPRAY TWINJET TWIN FLAT 80DEG SS GRAY
TIP-SPRAY TWINJET TWIN FLAT 110DEG SS BLUE
TIP-SPRAY TWINJET TWIN FLAT 110DEG SS RED
TIP-SPRAY TWINJET TWIN FLAT 110DEG SS BROWN
TIP-SPRAY TWINJET TWIN FLAT 110DEG SS GRAY
TIP-SPRAY TWINJET TWIN FLAT 110DEG SS WHITE
TIP-SPRAY TWINJET TWIN FLAT 110DEG SS LIGHT BLUE
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
TJ60-6501VS
TJ60-8002VS
TJ60-8003VS
TJ60-8004VS
TJ60-8005VS
TJ60-8006VS
TJ60-11003VS
TJ60-11004VS
TJ60-11005VS
TJ60-11006VS
TJ60-11008VS
TJ60-11010VS
•
401
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Fertilizer - Liquid
Quick Caps
PART NUMBER
CP25611-1-NY
CP25611-2-NY
402
DESCRIPTION
CAP-QUICK NYLON BLACK
CAP-QUICK NYLON WHITE
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Quick Caps
DESCRIPTION
CAP-QUICK NYLON RED
CAP-QUICK NYLON BLUE
CAP-QUICK NYLON GREEN
CAP-QUICK NYLON YELLOW
CAP-QUICK NYLON BROWN
CAP-QUICK NYLON ORANGE
CAP-QUICK POLY GRAY
CAP-QUICK NYLON VIOLET
CAP-QUICK NYLON BLACK
CAP-QUICK NYLON WHITE
CAP-QUICK NYLON RED
CAP-QUICK NYLON BLUE
CAP-QUICK NYLON GREEN
CAP-QUICK NYLON YELLOW
CAP-QUICK NYLON BROWN
CAP-QUICK NYLON ORANGE
CAP-QUICK POLY GRAY
CAP-QUICK NYLON BLACK HIGH CAPACITY
CAP-QUICK NYLON WHITE HIGH CAPACITY
CAP-QUICK NYLON BLUE HIGH CAPACITY
CAP-QUICK NYLON GREEN HIGH CAPACITY
CAP-QUICK NYLON BLACK
CAP-QUICK NYLON WHITE
CAP-QUICK NYLON RED
CAP-QUICK NYLON BLUE
CAP-QUICK NYLON GREEN
CAP-QUICK NYLON YELLOW
CAP-QUICK NYLON BROWN
CAP-QUICK NYLON ORANGE
CAP-QUICK NYLON VIOLET
CAP-QUICK NYLON BLACK
CAP-RETROFIT BLACK HARDI BODIES
CAP-BLACK HARDI BODIES
CAP-WHITE HARDI BODIES
CAP-RED HARDI BODIES
CAP-BLUE HARDI BODIES
CAP-YELLOW HARDI BODIES
CAP-GASKET HARDI BODIES FOR TIP STRAINER
CAP-QUICK TEEJET 1/8"
CAP-QUICK TEEJET 1/4"
CAP-QUICK TEEJET 45 DEG 1/4" FNPT
CAP-QUICK TEEJET 90 DEG 1/4" FNPT
CAP-SHUTOFF SUB ASSY
GASKET-CAP SEAT EPDM
GASKET-CAP SEAT VITON
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
CP25611-3-NY
CP25611-4-NY
CP25611-5-NY
CP25611-6-NY
CP25611-7-NY
CP25611-8-NY
CP25611-9-PP
CP25611-10-NY
CP25607-1-NY
CP25607-2-NY
CP25607-3-NY
CP25607-4-NY
CP25607-5-NY
CP25607-6-NY
CP25607-7-NY
CP25607-8-NY
CP25607-9-PP
CP25609-1-NY
CP25609-2-NY
CP25609-4-NY
CP25609-5-NY
CP25597-1-NY
CP25597-2-NY
CP25597-3-NY
CP25597-4-NY
CP25597-5-NY
CP25597-6-NY
CP25597-7-NY
CP25597-8-NY
CP25597-10-NY
CP98578-1-NY
CP23307-1-CE
CP21399-1-CE
CP21399-2-CE
CP21399-3-CE
CP21399-4-CE
CP21399-6-CE
CP26227-EPR
QJ4676-1/8-NYR
QJ4676-1/4-NYR
QJ4676-45-1/4-NYR
QJ4676-90-1/4-NYR
19843-NYR
CP19438-EPR
CP19438-VI
403
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Nozzle Bodies and Accessories
Nozzle Bodies - Wet Boom
24216 Series
Fertilizer - Liquid
24216 Triple Nozzle Bodies for Wet Booms
• Can be mounted to 20 mm, 1/2", 3/4" or 1" pipe or equivalent size tubing.
• Provides three spray positions for easy change of spray tips.
• Shutoff position provided between each spray position.
• Features ChemSaver® drip free shutoff. Requires 10 psi (0.7 bar) at the nozzle to open check
valve.
• Standard diaphragm of EPDM with optional Viton® available.
• Maximum operating pressure of 150 psi (10 bar).
• 1/2" and 3/4" sizes include mounting hole in upper clamp subassembly for attachment to flat
surfaces.
• Mounts to a 3/8" (9.5 mm) or 9/32" (7.0 mm) hole drilled in pipe or tubing.
• Flow rate: 1.6 gpm (6.1 l/min) at 5 psi (0.34 bar) pressure drop, 2.26 gpm (8.6 l/min) at 10 psi (0.69
bar) pressure drop.
PART NUMBER
24216-1/2-NYB
24216-3/4-NYB
24216-1-NYB
DESCRIPTION
NOZZLE BODY-TRIPLE 1/2" WET BOOM
NOZZLE BODY-TRIPLE 3/4" WET BOOM
NOZZLE BODY-TRIPLE 1" WET BOOM
QJ17560 Series
QJ17560 Single Nozzle Bodies for Wet Booms
• Can be mounted to 20 mm, 25 mm, 1/2", 3/4" or 1" pipe or equivalent size tubing.
• Features ChemSaver drip free shutoff. Requires 10 psi (0.7 bar) at the nozzle to open check valve.
• Standard diaphragm of EPDM with optional Viton available.
• Mounts to a 3/8" (9.5 mm) or 9/32" (7.0 mm) hole drilled in pipe or tubing.
• All sizes include a mounting hole in upper clamp subassembly for mounting to flat surfaces.
• Maximum operating pressure of 300 psi (20 bar).
• Flow rate: 2.25 gpm (8.5 l/min) at 5 psi (0.34 bar) pressure drop, 3.18 gpm (12.0 l/min) at 10 psi
(0.69 bar) pressure drop.
PART NUMBER
QJ17560-1/2NYB
QJ17560-3/4-NYB
QJ17560-1-NYB
404
DESCRIPTION
NOZZLE BODY-SINGLE 1/2" WET BOOM STRAIGHT W/CHEMSAVER
NOZZLE BODY-SINGLE 3/4" WET BOOM STRAIGHT W/CHEMSAVER
NOZZLE BODY-SINGLE 1" WET BOOM STRAIGHT W/CHEMSAVER
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Nozzle Bodies and Accessories
Nozzle Bodies - Wet Boom
QJ22187 Series
QJ22187 Single Nozzle Bodies for Wet Booms
• Can be mounted to 1/2", 3/4" or 1" pipe or equivalent size tubing.
• 1/2" and 3/4" sizes include a mounting hole in clamp subassembly for mounting to flat surfaces.
• Allows side mounting to flat surface for protection of nozzle body.
• Features ChemSaver drip free shutoff. Requires 10 psi (0.7 bar) at the nozzle to open check valve.
• Standard diaphragm of EPDM with optional Viton available.
• Mounts to a 3/8" (9.5 mm) hole drilled in pipe or tubing.
• Maximum operating pressure of 300 psi (20 bar).
• Flow rate: 2.5 gpm (9.5 l/min) at 5 psi (0.34 bar) pressure drop, 3.54 gpm (13.4 l/min) at 10 psi
(0.69 bar) pressure drop.
PART NUMBER
QJ22187-1/2-NYB
QJ22187-3/4-NYB
QJ22187-1-NYB
DESCRIPTION
NOZZLE BODY-SINGLE 1" WET BOOM 90DEG W/CHEMSAVER
NOZZLE BODY-SINGLE 3/4" WET BOOM 90DEG W/CHEMSAVER
NOZZLE BODY-SINGLE 1" WET BOOM 90DEG W/CHEMSAVER
Fertilizer - Liquid
QJ7421 Series
QJ7421 Single Nozzle Bodies for Wet Booms
• Can be mounted to 1/2", 3/4" or 1" pipe or equivalent size tubing.
• 1/2" and 3/4" sizes include a mounting hole in upper clamp subassembly for mounting to flat surfaces.
• Mounts to a 3/8" (9.5 mm) hole drilled in pipe or tubing.
• Maximum operating pressure of 300 psi (20 bar).
PART NUMBER
QJ7421-1/2-NYB
QJ7421-3/4-NYB
QJ7421-1-NYB
QJ7421-1T-SS
DESCRIPTION
NOZZLE BODY-SINGLE 1/2" WET BOOM STRAIGHT
NOZZLE BODY-SINGLE 3/4" WET BOOM STRAIGHT
NOZZLE BODY-SINGLE 1" WET BOOM STRAIGHT
NOZZLE BODY-SPLIT EYELET 1" WET BOOM STRAIGHT SS
www.feiinc.com
405
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Nozzle Bodies and Accessories
Nozzle Bodies - Wet Boom
QJ363 Series
Fertilizer - Liquid
QJ363 Nozzle Bodies for Wet Booms
• Available with either 3 spray positions for easy change of spray tips or quick boom flushing.
• Positive shutoff between each position.
• Automatic spray alignment using flat fan spray tips.
• Maximum operating pressure of 300 psi (20 bar).
• Available in 25 mm, 1/2", 3/4" or 1" pipe connections.
• Includes ChemSaver® diaphragm check valve for drip free shutoff. Standard diaphragm opens at
10 psi (0.7 bar).
• Standard EPDM diaphragm with Viton® available as an option.
• Also available with optional Air ChemSaver or e-ChemSaver® shutoff valves.
• Flow Rate: 2.25 gpm (8.5 l/min) at 5 psi (0.34 bar) pressure drop, 3.18 gpm (12.0 l/min) with 10 psi
(0.69 bar) pressure drop.
• Mounts to a 3/8" (9.5 mm) hole drilled in pipe or tubing.
• Molded hex socket in upper clamp for attaching to flat surfaces. Accepts 5/16" or M8 bolt.
• Hinged upper clamp reduces assembly time and fits inside common boom channels.
QJ363F Multiple Nozzle Bodies with Fertilizer Outlets for Wet Booms
• Same features as QJ363 but is a single fertilizer nozzle outlet with shutoff cap and 3 spray positions
for easy change of spray tips or quick boom flushing.
PART NUMBER
QJ363-3/4-NYB
QJ363-1-NYB
QJ363F-1-NYB
DESCRIPTION
NOZZLE BODY-360 3/4" WET BOOM 3 OUTLET
NOZZLE BODY-360 1" WET BOOM 3 OUTLET
NOZZLE BODY-WET BOOM 3+1 FERT SPRAY OUTLETS
QJ364 Series
QJ364 Nozzle Bodies for Wet Booms
• Available with either 4 spray positions for easy change of spray tips or quick boom flushing.
• Positive shutoff between each position.
• Automatic spray alignment using flat fan spray tips.
• Maximum operating pressure of 300 psi (20 bar).
• Available in 25 mm, 1/2", 3/4" or 1" pipe connections.
• Includes ChemSaver® diaphragm check valve for drip free shutoff. Standard diaphragm opens at
10 psi (0.7 bar).
• Standard EPDM diaphragm with Viton® available as an option.
• Also available with optional Air ChemSaver or e-ChemSaver® shutoff valves.
• Flow Rate: 2.25 gpm (8.5 l/min) at 5 psi (0.34 bar) pressure drop, 3.18 gpm (12.0 l/min) with 10 psi
(0.69 bar) pressure drop.
• Mounts to a 3/8" (9.5 mm) hole drilled in pipe or tubing.
• Molded hex socket in upper clamp for attaching to flat surfaces. Accepts 5/16" or M8 bolt.
• Hinged upper clamp reduces assembly time and fits inside common boom channels.
PART NUMBER
QJ364C-3/4-NYB
QJ364-1-NYB
406
DESCRIPTION
NOZZLE-BODY-360 3/4" WET BOOM 4 OUTLET
NOZZLE BODY-360 1" WET BOOM 4 OUTLET
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Nozzle Bodies and Accessories
Nozzle Bodies - Wet Boom
QJ365 Series
QJ365 Nozzle Bodies for Wet Booms
• Available with either 5 spray positions for easy change of spray tips or quick boom flushing.
• Positive shutoff between each position.
• Automatic spray alignment using flat fan spray tips.
• Maximum operating pressure of 300 psi (20 bar).
• Available in 25 mm, 1/2", 3/4" or 1" pipe connections.
• Includes ChemSaver® diaphragm check valve for drip free shutoff. Standard diaphragm opens at
10 psi (0.7 bar).
• Standard EPDM diaphragm with Viton® available as an option.
• Also available with optional Air ChemSaver or e-ChemSaver® shutoff valves.
• Flow Rate: 2.25 gpm (8.5 l/min) at 5 psi (0.34 bar) pressure drop, 3.18 gpm (12.0 l/min) with 10 psi
(0.69 bar) pressure drop.
• Mounts to a 3/8" (9.5 mm) hole drilled in pipe or tubing.
• Molded hex socket in upper clamp for attaching to flat surfaces. Accepts 5/16" or M8 bolt.
• Hinged upper clamp reduces assembly time and fits inside common boom channels.
DESCRIPTION
NOZZLE BODY-360 3/4" WET BOOM 5 OUTLET
NOZZLE BODY-360 1" WET BOOM 5 OUTLET
Fertilizer - Liquid
PART NUMBER
QJ365-3/4-NYB
QJ365-1-NYB
Nozzle Bodies - Dry Boom
24230 Series
24230 Triple Nozzle Body Assemblies
• Designed to greatly simplify changing spray tips in the field.
• Provides three spray positions for easy change of spray tips or quick boom flushing.
• Positive shutoff between each spray position.
• Includes ChemSaver® diaphragm check valve for drip-free shutoff. Opens at 10 PSI (0.7 bar).
• Standard EPDM diaphragm with Viton® available as an option.
• Can be used with all Quick TeeJet caps.
• Nylon body.
• Maximum operating pressure of 125 psi (9 bar).
• Available in 1/2" and 3/4" single, double or triple hose shanks.
• Flow Rate: 1.6 gpm (6.0 l/min) at 5 psi (0.34 bar) pressure drop, 2.26 gpm (8.6 l/min) at 10 psi
(0.69 bar) pressure drop.
PART NUMBER
24230-1-540-NYB
24230-1-785-NYB
24230-2-540-NYB
24230-2-785-NYB
DESCRIPTION
NOZZLE BODY-TRIPLE 1/2" DRY BOOM SINGLE
NOZZLE BODY-TRIPLE 3/4" DRY BOOM SINGLE
NOZZLE BODY-TRIPLE 1/2" DRY BOOM DOUBLE
NOZZLE BODY-TRIPLE 3/4" DRY BOOM DOUBLE
www.feiinc.com
407
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Nozzle Bodies and Accessories
Nozzle Bodies - Dry Boom
QJ100 Series
PART NUMBER
18635-111-406-NYB
18638-111-540-NYB
18719-111-785-NYB
18636-112-406-NYB
18639-112-540-NYB
18720-112-785-NYB
18637-113-406-NYB
18640-113-540-NYB
DESCRIPTION
NOZZLE BODY-3/8" SINGLE HOSE QUICK NOZZLE
NOZZLE BODY-1/2" SINGLE HOSE QUICK NOZZLE
NOZZLE BODY-3/4" SINGLE HOSE QUICK NOZZLE
NOZZLE BODY-3/8" DOUBLE HOSE QUICK NOZZLE
NOZZLE BODY-1/2" DOUBLE HOSE QUICK NOZZLE
NOZZLE BODY-3/4" DOUBLE HOSE QUICK NOZZLE
NOZZLE BODY-3/8" TRIPLE HOSE QUICK NOZZLE
NOZZLE BODY-1/2" TRIPLE HOSE QUICK NOZZLE
QJ200 Series
•
•
Fertilizer - Liquid
•
•
PART NUMBER
19349-211-406-NYB
19349-211-540-NYB
19349-211-785-NYB
19350-212-406-NYB
19350-212-540-NYB
19350-212-785-NYB
19351-213-406-NYB
19351-213-540-NYB
19351-213-785-NYB
Available with single, double or triple hose shanks for 3/8", 1/2" and 3/4" I.D. hose.
Drip free shutoff with TeeJet ChemSaver®. Opens at 10 PSI (0.7 bar). Standard diaphragm is EPDM with
Viton® optional.
Maximum operating pressure of 125 psi (9 bar).
Flow rate: 2.25 gpm (8.5 l/min) at 5 psi (0.34 bar) pressure drop, 3.18 gpm (12.0 l/min) at 10 PSI (0.69 bar)
pressure drop.
DESCRIPTION
NOZZLE BODY-3/8" DRY BOOM SINGLE HOSE SINGLE NOZZ 125PSI
NOZZLE BODY-1/2" DRY BOOM SINGLE HOSE SINGLE NOZZ 125PSI
NOZZLE BODY-3/4" DRY BOOM SINGLE HOSE SINGLE NOZZ 125PSI
NOZZLE BODY-3/8" DRY BOOM DOUBLE HOSE SINGLE NOZZ 125PSI
NOZZLE BODY-1/2" DRY BOOM DOUBLE HOSE SINGLE NOZZ 125PSI
NOZZLE BODY-3/4" DRY BOOM DOUBLE HOSE SINGLE NOZZ 125PSI
NOZZLE BODY-3/8" DRY BOOM TRIPLE HOSE SINGLE NOZZ 125PSI
NOZZLE BODY-1/2" DRY BOOM TRIPLE HOSE SINGLE NOZZ 125PSI
NOZZLE BODY-3/4" DRY BOOM TRIPLE HOSE SINGLE NOZZ 125PSI
QJ300 Series
•
•
•
•
•
PART NUMBER
22251-311-375-NYB
22251-311-500-NYB
22251-311-750-NYB
22252-312-375-NYB
22252-312-500-NYB
22252-312-750-NYB
408
Available with single and double hose shanks for 3/8", 1/2" and 3/4" I.D. hose.
Drip free shutoff with TeeJet ChemSaver. Opens at 10 psi (0.7 bar). Standard diaphragm is EPDM with Viton
optional.
Maximum operating pressure of 300 psi (20 bar).
Flow rate: 3.5 gpm (13.2 l/min) at 5 psi (0.34 bar) pressure drop, 4.9 gpm (18.5 l/min) at 10 psi (0.69 bar)
pressure drop.
Also available in polypropylene with a maximum operating pressure of 150 psi (10 bar).
DESCRIPTION
NOZZLE BODY-3/8" DRY BOOM SINGLE HOSE SINGLE NOZZ 300PSI
NOZZLE BODY-1/2" DRY BOOM SINGLE HOSE SINGLE NOZZ 300PSI
NOZZLE BODY-3/4" DRY BOOM SINGLE HOSE SINGLE NOZZ 300PSI
NOZZLE BODY-3/8" DRY BOOM DOUBLE HOSE SINGLE NOZZ 300PSI
NOZZLE BODY-1/2" DRY BOOM DOUBLE HOSE SINGLE NOZZ 300PSI
NOZZLE BODY-3/4" DRY BOOM DOUBLE HOSE SINGLE NOZZ 300PSI
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Nozzle Bodies and Accessories
Nozzle Bodies - Dry Boom
QJ360 Series
PART NUMBER
QJ363-500-1-NYB
QJ363-750-1-NYB
QJ363-1000-1-NYB
QJ364-750-1-NYB
QJ365-750-1-NYB
QJ363-500-2-NYB
QJ363-750-2-NYB
QJ364-750-2-NYB
QJ365-750-2-NYB
QJ365C-1000-2-NYB
DESCRIPTION
NOZZLE BODY-360 1/2" DRY BOOM 3 OUTLET SINGLE
NOZZLE BODY-360 3/4" DRY BOOM 3 OUTLET SINGLE
NOZZLE BODY-360 1" DRY BOOM 3 OUTLET SINGLE
NOZZLE BODY-360 3/4" DRY BOOM 4 OUTLET SINGLE
NOZZLE BODY-360 3/4" DRY BOOM 5 OUTLET SINGLE
NOZZLE BODY-360 1/2" DRY BOOM 3 OUTLET DOUBLE
NOZZLE BODY-360 3/4" DRY BOOM 3 OUTLET DOUBLE
NOZZLE BODY-360 3/4" DRY BOOM 4 OUTLET DOUBLE
NOZZLE BODY-360 3/4" DRY BOOM 5 OUTLET DOUBLE
NOZZLE BODY-365C 1" DRY BOOM 5 OUTLET DOUBLE
www.feiinc.com
409
Fertilizer - Liquid
QJ360 Multiple Nozzle Body for Dry Booms
• Available with either 3, 4 or 5 spray positions for easy change of spray tips or quick boom flushing.
• Positive shutoff between each spray position.
• Automatic spray alignment using flat fan spray tips.
• Maximum operating pressure of 300 psi (20 bar).
• Available in 1/2", 3/4" or 1" single or double hose shanks.
• Includes ChemSaver® diaphragm check valve for drip free shutoff. Standard diaphragm opens at 10 psi (0.7 bar).
• Standard EPDM diaphragm with Viton® available as an option.
• Also available with optional Air ChemSaver or e-ChemSaver® shutoff valves.
• Durable design mounts body high on boom structure for maximum protection.
• Flow Rate: 2.25 gpm (8.5 l/min) with 5 psi (0.34 bar) pressure drop, 3.18 gpm (12.0 l/min) with 10 psi (0.69 bar) pressure drop.
• Molded hex socket in upper clamp for attaching to flat surfaces. Accepts 5/169 or M8 bolt.
• Hinged upper clamp reduces assembly time and fits inside common boom channels.
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Nozzle Bodies and Accessories
Check Valves
Fertilizer - Liquid
QJ8355-NYB
• Allows use of Quick TeeJet system with 1/89 and 1/49 NPT female connections.
• Side mounting with ChemSaver no drip shutoff. Requires 10 psi (0.7 bar) at nozzle to open check valve.
• Standard diaphragm of EPDM with optional Viton available upon request.
• Maximum operating pressure of 300 psi (20 bar).
• Flow rate: 2.25 gpm (8.5 l/min) at 5 psi (0.34 bar) pressure drop, 3.18 gpm (12.0 l/min) at 10 psi (0.69 bar) pressure drop.
QJT8360-NYB
• Retrofits to a Quick TeeJet system with ChemSaver® no drip shutoff. Requires 10 psi (0.7 bar) at nozzle to open check valve.
• Standard diaphragm of EPDM with optional Viton® available upon request.
• Maximum operating pressure of 300 psi (20 bar).
• Flow rate: 2.25 gpm (8.5 l/min) at 5 PSI (0.34 bar) pressure drop, 3.18 gpm (12.0 l/min) at 10 psi (0.69 bar) pressure drop.
PART NUMBER
QJ8355-1/8-NYB
QJ8355-1/4-NYB
QJ8360-NYB
QJT8360-NYB
DESCRIPTION
VALVE-1/8" DIAPHRAGM CHECK QUICK NOZZLE BODY
VALVE-1/4" DIAPHRAGM CHECK QUICK NOZZLE BODY
VALVE-DIAPHRAGM CHECK QUICK NOZZLE BODY
ADAPTER-DIAPHRAGM QUICK TEEJET CP1325 CAP
Swivel Nozzle Bodies
Quick TeeJet swivel nozzle body assemblies provide the same spray tip adjustability of a standard TeeJet threaded swivel plus the quick
change and self-aligning features of the Quick TeeJet System. TeeJet swivel nozzle bodies are primarily for use with tips employed in row
crop spraying. A locknut holds swivel bodies firmly in position at selected spray projection angle so they are not affected by jarring and
vibration. For use at pressures up to 125 psi (9 bar).
PART NUMBER
QJ8600-1/4-NYB
QJ8600-2-1/4-NYB
8600-1/4T-NYB
8600-2-1/4T-NYB
410
DESCRIPTION
ADAPTER-SINGLE SWIVEL QUICK TEEJET
ADAPTER-DOUBLE SWIVEL QUICK TEEJET
NOZZLE BODY-NYLON SINGLE SWIVEL
NOZZLE BODY-TEEJET SWIVEL
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Nozzle Bodies and Accessories
Adapters
QJ90-1-NYR fits standard Quick TeeJet bodies. One piece, 90° elbow is ideal for installation of TK-VS FloodJet® and TF-VS or TF-VP
Turbo FloodJet nozzles on single or multiple outlet nozzle bodies. Proper orientation of spray tip enhances spray distribution quality.
• Nylon body construction for strength and durability, with EPDM gasket (Viton® optional).
• Outlet can be fitted with Quick TeeJet caps and TeeJet spray tips.
• Adapter outlet accepts standard tip strainers.
• Maximum operating pressure of 300 psi (20 bar).
QJ1/4T-NYB and QJT-NYB
• QJ1/4T-NYB allows use of Quick TeeJet system with 1/4" NPT and BSPT male connections.
• QJT-NYB permits use of Quick TeeJet system with standard 11/16"–16 TeeJet thread.
• Maximum operating pressure of 300 PSI (20 bar).
QJ1/4TT-NYB allows use of Quick TeeJet system with 1/4" NPT and BSPT female connections with a maximum operating pressure of 300
psi (20 bar).
55240-CELR converts Hardi® snap-fit nozzle body connection to Quick TeeJet connection for easy installation of TeeJet tips. Especially
useful for AIC, XRC and SJ7 tips. Acetal construction with EPDM gasket for durability and chemical resistance. Accepts standard tip
strainers. Maximum operating pressure of 150 psi (10 bar).
22674-1/4-NYB allows use of Quick TeeJet system with 1/4" NPT or BSPT female connections.
PART NUMBER
QJ90-1-NYR
QJ90-2-NYR
QJT-NYB
QJ1/4T-NYB
QJ1/4TT-NYB
50854-NYB
55240-CELR
22674-1/4-NYB
DESCRIPTION
ADAPTER-DUO NOZZLE QUICK TEEJET W/EPR GASKET
ADAPTER-DUO NOZZLE QUICK TEEJET
ADAPTER-NOZZLE BODY QUICK TEEJET
BODY-QUICK JET
ADAPTER-1/4" NOZZLE BODY QUICK TEEJET
ADAPTER-1" QUICK JET EXTENSION
ADAPTER-HARDI QJ
ADAPTER-45DEG NOZZLE BODY QUICK TEEJET
www.feiinc.com
411
Fertilizer - Liquid
QJ90-2-NYR fits standard Quick TeeJet bodies. When used with standard flat fan tips produces a twin type spray pattern for improved
coverage and canopy penetration.
• Made of nylon with CP19438-EPR gasket (included).
• Use with Quick TeeJet cap and gasket for automatic alignment when using flat fan spray tips.
• 90° included angle between outlets.
• Maximum operating pressure of 300 psi (20 bar).
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Nozzle Bodies and Accessories
Hose Drops
Hose drops connect to standard and Quick TeeJet nozzle bodies and can also be used with swivels. Nylon with cap and EPDM gasket, 1/4"
NPT outlet. Available in 15" (380 mm) and 24" (610 mm) lengths with a maximum operating pressure of 125 psi (9 bar).
Note: QJ1/4T-NYB can be attached to hose drops for use with Quick TeeJet caps.
PART NUMBER
21353-6-15NYB
21353-6-24NYB
DESCRIPTION
DROP-HOSE 15" NYLON
DROP-HOSE 24" NYLON
Fertilizer - Liquid
Quick Caps
QJ4676-1/8-NYR and QJ4676-1/4-NYR permits use of standard 1/8" and 1/4" nozzles. Can be used for mounting pressure gauge at the
nozzle. QJ4676-45-1/4-NYR 45° Quick TeeJet cap with 1/4" NPT female threaded outlet. QJ4676-90-1/4-NYR 90° Quick TeeJet cap with
1/4" NPT female threaded outlet. 19843-NYR provides shutoff at nozzle for quick spacing change or change in spray swath. NOTE: These
Quick TeeJet caps available only in black.
PART NUMBER
QJ4676-1/8-NYR
QJ4676-1/4-NYR
QJ4676-45-1/4-NYR
QJ4676-90-1/4-NYR
19843-NYR
412
DESCRIPTION
CAP-QUICK TEEJET 1/8"
CAP-QUICK TEEJET 1/4"
CAP-QUICK TEEJET 45 DEG 1/4" FNPT
CAP-QUICK TEEJET 90 DEG 1/4" FNPT
CAP-SHUTOFF SUB ASSY
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Nozzle Bodies and Accessories
Push-To-Connect Caps and Nozzle Bodies
Fittings feature push to connect couplers for fast, easy, leak free assembly. Offered in body, straight cap, 90º fixed cap and 90º swivel
cap. Accepts plastic and soft metal tubing. Commonly used for liquid fertilizer application systems on planters and toolbars. Maximum
operating pressure of 100 psi (7 bar).
DESCRIPTION
CAP-QJ PUSH TO CONNECT 3/8" W/GASKET
CAP-QJ PUSH TO CONNECT 1/4" W/GASKET
BODY-QJ PUSH TO CONNECT 3/8" 2 PSI W/CHECK VALVE
BODY-QJ PUSH TO CONNECT 1/4"
BODY-QJ PUSH TO CONNECT 1/4" 2 PSI W/CHECK VALVE
Fertilizer - Liquid
PART NUMBER
QJ98586-3/8
QJ98588-1/4
QJ98590-3/8-2
QJ98592-1/4-10
QJ98592-1/4-2
Boom Clamps
PART NUMBER
BC34R
BC100
BC100R
BC114
QJ111-1/2
QJ111-3/4
QJ111-1
QJ111-11/4
QJ111SQ-3/4
QJ111SQ-1
QJ111SQ-1 1/4
QJ111SQ-11/2
DESCRIPTION
CLAMP-3/4" ROUND STEEL BOOM
CLAMP-1" SQ STEEL BOOM
CLAMP-1" ROUND BOOM STEEL
CLAMP-1-1/4" SQ BOOM STEEL
CLAMP-VARI QUICK 1/2
CLAMP-VARI QUIK 3/4"ROUND
CLAMP-VARI QUICK 1"ROUND
CLAMP-VARI QUICK 1-1/4"ROUND
CLAMP-VARI QUICK 3/4" SQ
CLAMP-ASSY 1" SQ
CLAMP-1-1/4" SQ BOOM
CLAMP-VARI QUICK 1-1/2" SQ
www.feiinc.com
413
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Nozzle Bodies and Accessories
Tip Screens, Strainers and Check Valves
Fertilizer - Liquid
TeeJet slotted strainers 4514-32 are one piece and used for liquids containing suspended solids.
The TeeJet tip strainers protect spray tip orifices from clogging and damage. Stainless steel screens are available in 24, 59, 80, 100 and
200 mesh. 19845 tip strainers are available in 25 and 50 mesh only.
The polypropylene check valve 11750-PP-5 functions in order to operate with higher capacity TeeJet strainers that do not utilize strainers.
4193A strainer and check valve minimizes nozzle dripping; fits all TeeJet nozzles. Gall check opens at 5 psi (0.34 bar). Recommended for
flow rates up to 0.8 gpm (3 l/min.), 24, 50, 100 and 200 mesh screens, not for use with AI or DG tips. NOTE: Use of these ball check
valves results in a pressure drop of 5 psi (3.34 bar) to 10 psi (0.7 bar) depending on spring rating.
PART NUMBER
4514-32
4514-NY-20
4514-NY-32
5053-50-SS
5053-100-SS
19845-25PP
19845-50PP
8079PP
8079PP-80
8079PP-100
8079PP-200
6051-SS-50
6051-SS-80
6051-SS-100
11750-PP-5
4193A-PP-5-50
4193A-PP-5-100
4193A-PP-10-50
414
DESCRIPTION
STRAINER-SLOTTED BRASS
STRAINER-SLOTTED NYLON
STRAINER-SLOTTED NYLON
SCREEN-BRASS 50 MSH SS
SCREEN-BRASS 100 MSH SS
STRAINER-TIP POLY 25MSH
STRAINER-TIP POLY 50MSH
STRAINER-POLY 50MSH SS SCREEN
STRAINER-POLY 80MSH SS SCREEN
STRAINER-POLY 100MSH SS SCREEN
STRAINER-POLY 200MSH SS SCREEN
SCREEN-ALL STAINLESS 50 MSH
SCREEN-ALL STAINLESS 80 MSH
SCREEN-ALL STAINLESS 100 MSH
VALVE-CHECK 5 PSI POLY
STRAINER-CHECK VALVE POLY 50 MSH 5PSI SS VITON BALL
STRAINER-CHECK VALVE POLY 100 MSH 5PSI SS VITON BALL
STRAINER-CHECK VALVE POLY 50 MSH 10PSI SS VITON BALL
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
NOTES
Fertilizer - Liquid
www.feiinc.com
415
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Tank Rinse Nozzles
Fertilizer - Liquid
The SB-1 is a rotating rinse ball that rotates 360º when in use and is available in black only.
VSM is used for inside rinsing of chemical containers.
• All nylon construction.
• 40 orifices combine to produce a 240° spray angle.
• Available with 1/2" or 3/4" NPT or BSPT (F)
connection.
•
Recommended operating pressure 30–60 psi (2–4
bar).
Y33180 and Y9270 Features:
• Allows small pumps to circulate large volumes of liquid.
• Manufactured of glass filled polypropylene for excellent corrosion and chemical resistance.
• Large flow opening minimizes plugging.
• Available in 1/4", 3/8", 3/4" or 1-1/2" (M) pipe thread inlet connection.
Hypro high volume jet agitator 3371-0028 assures thorough mixing in large spraying equipment tanks. This jet agitator can inexpensively
increase output flow for agitation up to 5-1/2 times. It is constructed of glass filled polypropylene for excellent corrosion and wear
resistance. Includes three snap in orifices 1/4", 9/32" and 5/16" that help optimize inlet flows, with 3/4" NPT fittings, the agitator can
easily be retrofitted to replace smaller Hypro agitators.
416
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Tank Rinse Nozzles
The JET RINSE with multi-directional spray rinses chemical containers with hand grip handle.
D41892 rotary tank rinsing nozzle is used for rinsing the insides of chemical containers and spry tanks up to 6.5' in diameter. It has a
significant lower rotating speed at approximately 15% of typical speed, resulting in faster and more thorough cleaning of tank surface.
• Nozzle fits 1-1/2" opening.
• Available with 1/2" NPT or BSFP (F) connections.
• Recommended operating pressure 30-60 psi (2-4 bar)
• Self-cleaning sliding bearing.
with a maximum pressure 115 psi (8 bar).
• Body and inserts are made of Acetal.
DESCRIPTION
BALL-TANK RINSE SPRAY W/1" ML NIPPLE
NOZZLE-WASHING 1/2" 28 CAPACITY
NOZZLE-WASHING 1/2" 44 CAPACITY
NOZZLE-WASHING 1/2" 90 CAPACITY
NOZZLE-WASHING 3/4" 90 CAPACITY
NOZZLE-WASHING 3/4" 190 CAPACITY
NOZZLE-EDUCTOR TANK MIX
NOZZLE-EDUCTOR 3/4" MPT X 6-3/8" LONG 3/8" ORIFICE
AGITATOR-HYPRO JET
AGITATOR-ASSY JET 3/4" MPT HIGH VOLUME
RINSE-JET NOZZLE STAB & RINSE
NOZZLE-TANK RINSE 1/2"
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
SB-1
VSM-1/2-28
VSM-1/2-44
VSM-1/2-90
VSM-3/4-90
VSM-3/4-190
Y33180-PP-38
Y9270-PP
3371
3371-0028
JET RINSE
D41892-1/2-POM-6
417
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Tips and Nozzle Bodies
Fertilizer - Liquid
Orifice Disc
PART NUMBER
CP18999-EPR
418
DESCRIPTION
SEAL-EPDM RUBBER FOR 4916 ORIFICE PLATE
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Sprayers and Accessories
ATV/UTV Sprayers
Images are for illustration purposes only, actual sprayer may vary by model. Several optional accessories are shown in
photos. Call FEI Customer Service for complete options, pricing and availability.
DESCRIPTION
SPRAYER-ATV 25 GAL W/WAND BOOMLESS 1.8 GPM
SPRAYER-ATV 15 GAL BOOMLESS 2.0 GPM
SPRAYER-ATV 22 GAL BOOMLESS 2.0 GPM
SPRAYER-ATV 25 GAL BOOMLESS 2.0 GPM
SPRAYER-ATV 25 GAL PRO
BOOM-POLY 13'
BOOM-STEEL 20'
KIT-BOOMLESS NOZZLE 30'
SPRAYER-UTV FIELD BOSS 365 60 GAL 22.5 GPM HONDA
Fertilizer - Liquid
PART NUMBER
ATVFEI
ATV15BN24
ATV22BN24
ATV25BN24
ATVPRO25BN
PB13P
ASBS20SS
ASBB30
SFB060FG225GH
Weed Rollers
36" WR36 with 3 Gallon Tank
48" WR48 with 12 Gallon Tank
72" WR72 with 25 Gallon Tank
The no drift roller applicator presses the chemical directly on the plants. These units are gravity fed and have no electronics. The Tru-Kleen
supply tank features a 6" vented lid allows free flow of chemical. The push type WR36 has a grip handle. The pull type WR 48 has an
adjustable hitch to pull behind a lawn mower or ATV.
PART NUMBER
WR36
WR48
WR72
DESCRIPTION
ROLLER-WEED 36" HAND PUSH GREEN
ROLLER-WEED 48" PULL TYPE 12 GAL
ROLLER-WEED 72"
www.feiinc.com
419
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Sprayers and Accessories
Foam Markers
Fertilizer - Liquid
14 and 25 Gallon Dual Stage Foam Marker Features:
• 12V DC operated.
• Electric controls enclosed in weatherproof cover.
• Three position switch with wiring harness.
• Two stage foam generation.
FM1010 Compressor Features:
• Oil-less operation.
• Permanently lubricated bearings.
• Closed housing and motor vents.
• Stainless valves.
• Long life diaphragm.
• Field service capability.
•
•
•
•
Boom end mounted foam chambers.
100' delivery hose.
4" drop boots.
Fluorescent drop boots for visibility.
•
Die cast aluminum head, valve plate and diaphragm
hold down plate with dichromate conversion
treatment.
Balanced for smooth, low vibration operation.
Inlet filter.
•
•
NOTE: Thomas compressor is shown, manufacturer may vary.
PART NUMBER
FM1400
FM2500
FM1010
420
DESCRIPTION
MARKER-FOAM 14 GAL TANK DUAL STAGE FOAM PRODUCTION
MARKER-FOAM 25 GAL TANK DUAL STAGE FOAM PRODUCTION
COMPRESSOR-FOAM MARKER
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Sprayers and Accessories
Wind Meters
Kestrel 1000 Pocket Wind Meter gives you the reliable, accurate wind measurements.
Features:
Measurements:
Waterproof and floats
Current wind speed
Average wind speed
Hold function
Maximum wind gust
User replaceable impeller
Includes:
Slip on protective cover
Neck lanyard
Battery - CR2032 coin cell
Kestrel 3000 Pocket Weather Meter provides accurate relative humidity and dew point measurements, heat stress index and wet bulb
readings, you will have environmental information to let you know when conditions become unhealthy for strenuous exercise.
Measurements:
Includes:
Features:
Relative humidity/dew point
Slip on protective cover
Backlight
Heat stress index
Neck lanyard
Waterproof and floats
Wind chill
Battery - CR2032 coin cell
Hold function
User replacement impeller
Air temperature
External temperature sensor
Water/snow temperature
Patented quick response RH sensor
Current/average wind speed
Maximum wind gust
Kestrel 3500 Pocket Weather Tracker measures a complete range of weather measurements including; temperature, wind speeds,
barometric phenomena, pressure trends of up to 3 hours, and more.
Features:
Includes:
Waterproof and floats
Clock
Protective cover
Backlit display
Data hold function
Neck lanyard
High precision pressure sensor
User replaceable impeller
Batteries - CR2032
PART NUMBER
0800
0803
0808
0835
0801
DESCRIPTION
METER-WIND KESTREL 1000 POCKET
METER-WEATHER KESTREL 2000 POCKET
METER-WEATHER KESTREL 3000 POCKET
METER-WEATHER 3500 POCKET
IMPELLER-KESTREL WIND METER
www.feiinc.com
421
Fertilizer - Liquid
Kestrel 2000 Pocket Weather Meter features an external temperature sensor, accurate water and snow temperature, fully waterproof
and floats.
Includes:
Features:
Measurements:
Slip on protective cover
Backlight
Wind chill
Neck lanyard
Waterproof and floats
Air temperature
Battery - CR2032 coin cell
Hold function
Water temperature
User replaceable impeller
Snow temperature
External temperature sensor
Current/average wind speed
Maximum wind gust
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Sprayers and Accessories
Marking Flags
Fertilizer - Liquid
These multi-purpose plain unprinted marking flags are highly visible, brightly colored 4 mil plastic. They are weather and fade resistant for
long outdoor life. Your choice of two staff materials, wire or PVC. The wire staff consists of sturdy 15.5 gauge steel wire. PVC plastic is
solid, tangle free 1/8" for increased safety around machinery and underground utilities. Flags are available in fifteen colors. Note: List
price is per 100 flags with wire staff. Plastic flags are 50 per pack.
Ink Colors: Custom imprinting is available in a choice of ink colors listed below:
Red
Brown
Green
Black
Orange
White
Blue
Silver
Clear
Purple
Yellow
Fluorescent Lime
Fluorescent Green
Fluorescent Pink
Fluorescent Orange
Fluorescent Rocket Red
Screen Charges: There is a one-time $20 screen set-up charge for all custom printed flag orders. There is also a $20 charge for screen
artwork changes. After the initial screen charge, there is no additional charge for straight reorders as long as there is no change in the
artwork or copy. *Minimum 1,000 flag orders.
PART NUMBER
BBP-18
BBP-24Y
BBP-27
BBP-27-P
BBW-30
BBW-30-5
BBW-36
BBW-36-5
BBW-36-5P
422
DESCRIPTION
FLAG-4" X 5" - 18" PLASTIC STAFF PLAIN 50/BUNDLE
FLAG-4" X 5" - 24" PLASTIC STAFF YELLOW 50/BUNDLE
FLAG-5" X 6" - 27" PLASTIC STAFF ORANGE 50/BUNDLE
FLAG-5" X 6" - 27" PLASTIC STAFF PURPLE 50/BUNDLE
FLAG-4" X 5" - 30" WIRE STAFF ORANGE 100/BUNDLE
FLAG-5" X 8" - 30" WIRE STAFF FLUORESCENT PINK 100/BUNDLE
FLAG-4" X 5" - 36" WIRE STAFF WHITE 100/BUNDLE
FLAG-5" X 8" - 36" WIRE STAFF ORANGE 100/BUNDLE
FLAG-5" X 8" - 36" WIRE STAFF FLOURESCENT PINK 100/BUNDLE
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Sprayers and Accessories
Accessories
The TeeJet calibration container CP24034-PP features a 68 oz. (2.0 Liter) capacity and a raised dual scale in both US and metric
graduations. The container is molded of polypropylene for excellent chemical resistance and durability.
116000-1 calibration container has a 5 gallon measurement to calibrate fluid meters. It has molded one-piece design for lightweight
durability. Each container is individually calibrated at the factory for maximum accuracy.
PART NUMBER
CP20016-NY
CP24034-PP
116000-1
GHN075
FNB150S
FN-200
DESCRIPTION
BRUSH-TIP CLEANING TEE-JET SPRAYER
CONTAINER-CALIBRATION TEE-JET SPRAYER
CONTAINER-CALIBRATION 5 GAL
NOZZLE-3/4" SPRAY GARDEN HOSE
NOZZLE-FIRE HOSE 1-1/2" BRASS
NOZZLE-FIRE HOSE 2" FPT
www.feiinc.com
423
Fertilizer - Liquid
Garden hose nozzle GHN075 features heavy duty machined aluminum construction stands up to hard use and resists dents, mars and
scratches. It has a soft rubber comfort grip that provides a comfortable gripping texture. The aluminum hose connection provides a tight
fit and will not rust. The multiple spray patterns adjust from a powerful jet stream to a gentle fan spray and it has a stainless steel spray
cap for precise spray patterns. It is ideal for all your spraying needs.
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Spray Guns - TeeJet
Fertilizer - Liquid
50800-21 TriggerJet spray gun is a lightweight spray gun designed for use with backpack, canister or other low pressure sprayers. The
TriggerJet is made of molded polypropylene for excellent chemical resistance and durability.
•
•
•
•
•
•
•
Available with 15" (381 mm) polypropylene or 21" (533 mm) aluminum extension wand.
Available with 38720-PPB-X18 or X26 adjustable ConeJet® tips with a 30° offset.
Trigger lock permits locking gun in an open position for continuous flow.
Maximum operating pressure of 100 psi (7 bar).
1/4" or 3/8" hose shank connection.
Approximate maximum hose OD 1/2" (13 mm).
Polypropylene strainer located inside handle to prevent tip clogging.
50800-PP TriggerJet spray gun less extension and tip, can be fitted with any standard TeeJet tip.
The 22670 TriggerJet spray gun kit combines the 22650 TriggerJet spray gun with an extension wand. Maximum pressure is 150 PSI (10
bar).
•
•
•
•
•
•
22650 TriggerJet spray gun with choice of 1/4" or 3/8" hose shank and a 1/4" NPT or BSPT (F) thread inlet connection.
Trigger lock permits locking gun in an open position for continuous flow (optional).
22665 extension wand with choice of 15" (381 mm) or 24" (610 mm) lengths.
38720-PPB-X8 adjustable ConeJet® spray tip with Viton® O-ring.
CP22673-PP 45° and CP22664-PP straight adapters (other capacities available).
Accepts all standard TeeJet spray tips and tip strainers.
The 22650 TriggerJet spray gun is a lightweight spray gun designed for use with backpack, canister or other low pressure sprayers. The
TriggerJet is made of molded polypropylene for excellent chemical resistance and durability.
•
•
•
•
•
Choice of 1/4" or 3/8" hose shank and 1/4" NPT or BSPT (F) thread inlet connection.
Replaceable diaphragm made of Viton.
Trigger lock permits locking gun in an open position for continuous flow (optional).
Maximum operating pressure of 150 psi (10 bar).
Accepts all standard TeeJet spray tips and tip strainers.
The GunJet series spray guns are for spot spraying, tree spraying, livestock spraying and power washing at pressures from 300 to 800 psi.
To operate the spray gun, the handle is rotated 360º from shutoff to maximum flow position. As the handle is turned, spray changes from
initial cone spry through intermediate cone spray to straight stream. Spray tips are interchangeable orifice discs made of corrosion and
erosion resistant stainless steel.
424
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Sprayers and Accessories
Spray Guns - TeeJet
GunJet AA2 has an overall length 24", weight 3-1/2 pounds, brass. 3/4" garden hose thread (F) inlet connection. Also available in
aluminum as GunJet AA2-AL, weight 1-1/4 pounds.
The AA43 GunJet is designed and built for heavy duty service. Stem extends through extension to valve seat located directly behind orifice
disc for drip free shutoff and instant operating response. Convenient trigger lock for continuous spraying.
•
•
•
•
•
AA43L is 22" long and is for operating pressures up to 200 psi.
AA43H is 22" long and is for operating pressures 200 to 800 psi.
AA43LA is 13" long and is for operating pressures up to 200 psi.
Trigger handle control with 1/2" NPT or BSPT (F) inlet connections.
Exposed packing nut for easy adjustment of packing.
DESCRIPTION
GUN-SPRAY 21" ALUM EXT 1/4" HB INLET 100 PSI 1.4 GPM
GUN-SPRAY 21" ALUM EXT 3/8" HB INLET 100 PSI 1.4 GPM
GUN-SPRAY TRIGGERJET NO EXT 1/4" HB INLET
GUN-SPRAY TRIGGERJET NO EXT 3/8" HB INLET
GUN-SPRAY 15" X 3/8" HB INLET 150 PSI 0.74 GPM
GUN-SPRAY 24" X 3/8" HB INLET 150 PSI 0.74 GPM
GUN-SPRAY TRIGGERJET 1/4" FPT INLET WITHOUT WAND
GUN-SPRAY TRIGGERJET 3/8" HB INLET NO WAND
GUN-SPRAY 24" BRASS 800 PSI 6.5 GPM 3/4" FGH
GUN-SPRAY 24" BRASS 800 PSI 10 GPM 3/4" FGH
GUN-SPRAY 24" ALUM 800 PSI 6.5 GPM 3/4" FGH
GUN-SPRAY 22" ALUM 800 PSI 5.8 GPM 1/2" FPT
GUN-SPRAY 22" ALUM 200 PSI 2.9 GPM 1/2" FPT
GUN-SPRAY 22" ALUM 200 PSI 4.8 GPM 1/2" FPT
GUN-SPRAY 13" ALUM 200 PSI 2.9 GPM 1/2" FPT
GUN-SPRAY 13" ALUM 200 PSI 7.1 GPM 1/2" FPT
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
50800-21-AL-300
50800-21-AL-406
50800-PP-300
50800-PP-406
22670-PP-15-406
22670-PP-24-406
22650-PP-1/4
22650-PP-406
AA2-45
AA2-60
AA2-AL45
AA43H-AL6
AA43L-AL6
AA43L-AL8
AA43LA-AL-6
AA43LA-AL-10
425
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Sprayers and Accessories
Spray Guns - Hypro
Fertilizer - Liquid
Hypro 3381 adjustable pattern spray guns are offered in a variety of lengths and pressure ranges.
3381-010 and 3381-0011
17" or 21" barrel.
3 mm or 4 mm nozzle.
1/2" MNPT inlet.
Maximum 1200 psi.
Maximum capacity of 11 gpm.
3381-0013
7" barrel.
3 mm nozzle.
1/2" MNPT inlet.
Maximum 700 psi.
Maximum capacity of 19 gpm.
3381-0016
15" barrel.
3 mm nozzle.
3/8" MNPT inlet.
Sized for spot spraying.
Maximum 120 psi.
Maximum capacity of 1 gpm.
3381-0021
21" barrel.
3 mm nozzle.
3/8" and 1/2" hose barb.
Sized for spot spraying.
Maximum 60 psi.
Maximum capacity of 78 oz.
3381-0036
19" barrel.
3 mm nozzle.
3/8" hose barb.
Maximum 120 psi.
Maximum capacity of 1.75 gpm.
3381-0043 and 3381-0043L
7-1/4" or 18" barrel.
2.3 mm nozzle.
3/8" and 1/2" hose barb.
Maximum 600 psi.
Maximum capacity of 11 gpm.
No drip nozzle shut off and trigger lock.
PART NUMBER
3381-0010
3381-0011
3381-0013
3381-0016
3381-0021
3381-0036
3381-0043
3381-0043L
426
DESCRIPTION
GUN-SPRAY 17" X 1/2" INLET 1200 PSI 25 GPM
GUN-SPRAY 21" X 1/2" INLET 1200 PSI 30 GPM
GUN-SPRAY 7" X 1/2" INLET 700 PSI 19 GPM
GUN-SPRAY 15" X 3/8" INLET 120 PSI 1 GPM
GUN-SPRAY 21" X 3/8" INLET 60 PSI 1 GPM
GUN-SPRAY 19" X 3/8" INLET 120 PSI 2.5 GPM
GUN-SPRAY 7" X 3/8" INLET 600 PSI 11 GPM
GUN-SPRAY 18" X 3/8" INLET 600 PSI 11 GPM
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
NOTES
Fertilizer - Liquid
www.feiinc.com
427
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Tanks and Tank Accessories
Tank Fittings
TF series polyethylene and stainless steel bulkhead tank fitting have double sided female NPT threads and are available with EPDM or FKM
(viton type) gaskets.
Fertilizer - Liquid
The TF_AV (shown in tank bottom), anti-vortex tank flanges prevent swirl in the bottom of the tank and come standard FKM.
Glass reinforced polypropylene bolted bottom drain tank flanges and fittings have stainless steel bolts and bolt head plugs are sealed
ultrasonically. EPDM gaskets are standard.
NOTE: Manifold bottom drain and bulkhead tank fittings do not come with gaskets or clamps.
PART NUMBER
TF-050
TF-075
TF-100
TF-125
TF-150
TF-150V
TF-200
TF-220
TF-300
TF-400
TF038SS
TF075SS
TF-100/SS
TF-200/SS
TF-300SS
TF-100AV
TF-150AV
TF-200AV
BF100BD
BF150BD
BF200BD
BF300BD
MBF100
MBF100BD
428
DESCRIPTION
FITTING-BULKHEAD 1/2" POLY EPDM
FITTING-BULKHEAD 3/4" POLY EPDM
FITTING-BULKHEAD 1" POLY EPDM
FITTING-BULKHEAD 1-1/4" POLY EPDM
FITTING-BULKHEAD 1-1/2" POLY EPDM
FLANGE-1-1/2" POLY TANK FKM
FITTING-BULKHEAD 2" POLY EPDM
FITTING-BULKHEAD 2" POLY EPDM
FITTING-BULKHEAD 3" POLY EPDM
FITTING-BULKHEAD 4" POLY EPDM
FITTING-BULKHEAD 3/8" SS
FITTING-BULKHEAD 3/4" SS
BULKHEAD-1" SS
FITTING-BULKHEAD 2" SS
FITTING-BULKHEAD 3" SS
FITTING-BULKHEAD 1" ANTIVORTEX
FITTING-BULKHEAD 1-1/2" ANTIVORTEX
FITTING-TANK ANTI VORTEX 2"
FLANGE-TANK BTM DRAIN BOLTED 1" X 1" THREADED EPDM POLY
FLANGE-TANK BTM DRAIN BOLTED 1-1/2" X 2" THREADED EPDM POLY
FLANGE-TANK BTM DRAIN BOLTED 2" X 2" THREADED EPDM POLY
FLANGE-TANK BTM DRAIN BOLTED 3" X 3" THREADED EPDM POLY
FLANGE-MFLD 1" FLG X 1" EPDM FPT BOLTED TANK
FLANGE-MFLD 1" FP FLG X 1" EPDM FPT BOLTED TANK BTM
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Tanks and Tank Accessories
Tank Fittings
PART NUMBER
MBF200BDV
MBF220
MBF220BD
MBF300
MBF300BD
MTF220
MTF220BD
MTF300
MTF300BD
DESCRIPTION
FLANGE-MFLD 2" FLG X 2" FKM VITON FPT BOLTED TANK BTM DRN
FLANGE-MFLD 2" FP FLG X 2" EPDM FPT BOLTED TANK
FLANGE-MFLD 2" FP FLG X 2" EPDM FPT BOLTED TANK BTM DRN
FLANGE-MFLD 3" FLG X 3" EPDM FPT BOLTED TANK
FLANGE-MFLD 3" FLG X 3" EPDM FPT BOLTED TANK BTM DRAIN
FITTING-TANK 2" MFLD X 2" FPT
FITTING-TANK 2" MFLD X 2" FNPT BOTTOM DRAIN
FITTING-TANK 3" MFLD X 3" FNPT
FITTING-TANK 3" MFLD X 3" FNPT BOTTOM DRAIN
Tank Lids
Fertilizer - Liquid
PART NUMBER
H4-60002
H4-60011
H4-60019
H4-60032
H4-60038
H4-60322
H4-60365
H4-63485
LID-12-IND
TL12-0006
TL16
TL16-PRO
TL600
TL600C
TL650E
TL652E
TLV10R
TLVA10
DESCRIPTION
LID-8" W/AIR VENT
LID-16" W/4" CENTER AIR VENT
LID-6" W/AIR VENT
LID-8" W/RING & AIR VENT
LID-TANK 16" W/RING & CENTER VENT CAP
LID-5" W/BALL CHECK VENT
LID-16" VENTLESS
LID-TANK 16"W/RING BLUE SNAP IN VENT
LID-INDUCTOR 12"
LID-12" HINGED TWSTLK
LID-HINGED 16" 180DEG W/DURALOCK
LID-16" HINGED VENTED
LID-TANK 5-1/2" NON-VENTED
LID-TANK 5-1/2" VENTED
LID-TANK 6" SOLID W/GASKET EPDM
LID-TANK 6" W/VENTED 2" PLUG W/GASKET EPDM
LID-TANK 10" VENTED W/O RING POLY
LID-TANK 10" VENTED W/RING ASSY POLY
www.feiinc.com
429
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Tank Accessories
Fertilizer - Liquid
Hypro high volume jet agitator 3371-0028 assures thorough mixing in large spraying equipment tanks. This jet agitator can inexpensively
increase output flow for agitation up to 5-1/2 times. It is constructed of glass filled polypropylene for excellent corrosion and wear
resistance. Includes three snap in orifices 1/4", 9/32" and 5/16" that help optimize inlet flows, with 3/4" NPT fittings, the agitator can
easily be retrofitted to replace smaller Hypro agitators.
Y9270 Features:
• Allows small pumps to circulate large volumes of liquid.
• Manufactured of glass filled polypropylene for excellent corrosion and chemical resistance.
• Large flow opening minimizes plugging.
• Available in 1/4", 3/8", 3/4" or 1-1/2" (M) pipe thread inlet connection.
2" pressure vacuum vent 148-ALT has an aluminum body, caps and poppets. Poppets are Teflon coated. It has stainless steel screens,
2
2
pressure rating of 8 oz./in. and a vacuum rating of 1 oz./in.
SmartStraps 332776-9101 Ratchet Straps are designed to withstand the toughest outdoor conditions. Ergonomic, flared handle for
maximum leverage. Sewn in soft tie loop secures cargo without scratching or damaging paint or chrome. Includes easy grip, overmolded
release pawl and large head hex bolts.
Poly siphon tubes ST-200 and ST300 are full flow size, long length with male NPT threads.
The VC200 cap is glass reinforced polypropylene Male NPT.
430
www.feiinc.com
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
Tanks and Tank Accessories
Tank Accessories
The unique patented design of the Hudson valve FS-100 uses fluid pressure, as opposed to a lever arm and ball, as the force to close the
valve. This compact, self-contained design greatly enhances the valve’s reliability. The valve body is made of durable glass filled nylon.
Internal parts are of ABS plastic, silicone and stainless steel. When properly installed, the valve will meet anti-siphon requirements.
DESCRIPTION
PIN-TIE DOWN 100-150 GAL TANK
PIN-TIE DOWN 400 GAL TANK
PIN-TIE DOWN 500-1000 GAL TANKS
PIN-TIE DOWN 1200-4500 GAL TANKS
AGITATOR-ASSY JET 3/4" MPT HIGH VOLUME
NOZZLE-EDUCTOR 3/4" MPT X 6-3/8" LONG 3/8" ORIFICE
WRENCH-BUNG
VALVE-DRUM 3/4" PLASTIC FAUCET
VENT-PRESSURE VACUUM 2" 8 OZ
STRAP-RACHET 2" X 30'
TUBE-2" SIPHON POLY
TUBE-3" SIPHON POLY
CAP-2" AV VENT NO SC
VALVE-HUDSON 1" WATER
www.feiinc.com
Fertilizer - Liquid
PART NUMBER
STA01
STA02
STA03
STA04
3371-0028
Y9270-PP
W169
F6775
148-ALT
332776-9101
ST-200
ST300
VC200
FS-100
431
FEI, Inc.
Phone: 800-437-9702 Fax: 800-313-3299
NOTES
Fertilizer - Liquid
www.feiinc.com
432