hot & cold plate
synthesis system
easy reaction
heating and cooling
Atlas simply does it all
What is the Atlas Hot and Cold Plate?
The Atlas Hot and Cold Plate is an easy and accurate way of heating and
cooling reactions in flasks or vials. Designed to fit on the Atlas Base, the
Hot and Cold Plate connects to a recirculating heater/cooler to provide
temperature control from -40°C to +160°C. When a controllable circulator
is connected to the Atlas Base, the Hot and Cold Plate or reaction can be
accurately controlled to the temperature set on the Atlas Base.
The Hot and Cold Plate is connected to the
Atlas Base using a bayonet fitting and is interchangeable
with the standard Atlas Hot Plate.
: The Hot and Cold
plate has a standard diameter of 13.5 cm (5 5/16”). This is
compatible with the Atlas Stacking Dry Bath, Triple Dry Bath,
Vial Baths, Orbit Parallel Reaction Station and virtually all
other products designed to fit on hotplates.
The Atlas Magnetic Stirrer module screws
directly into the Hot and Cold Plate to provide high quality
magnetic stirring.
The Hot and Cold Plate has
an embedded RTD allowing feedback of plate temperature.
Alternatively a PTFE coated RTD can be inserted in the
reaction and that temperature controlled.
The Hot and Cold Plate can be used with
either standard M16 fittings or Atlas Quick Circulator
Connecters which require no tools for a leak free rapid
An integrated drip tray collects
condensation and melting ice. Covers is also available to
minimise ice build-up.
: The anodised aluminium plate provides
a “wipe clean” surface.
Fully tested between -40°C and
The temperature of the Hot and Cold
Plate is fully logged (as with all data on an Atlas System) and
can be downloaded to a USB stick for offline analysis.
Hot and Cold Plate
Large Vial Bath Cold Cover 6 x 28mm dia
Medium Vial Bath Cold Cover 8 x 20mm dia
Small Vial Bath Cold Cover 12 x 17mm dia
The Atlas Base Unit can be used to directly control the following
circulators (note that other types of circulator can be controlled
using the Atlas Software or used without feedback control).
(All modern Julabo circulators can be controlled
from the Atlas front panel).
Bronze Circulator (Julabo CF40)
Silver Circulator (Julabo FP50-MC) 2200002/2200012
Gold Circulator (Julabo FP51-SL)
The Atlas Hot and Cold
plate offers temperature
control from -40°C to +160°C
The Hot and Cold
Plate shown with the quick
circulator connectors
A stacking Dry Bath on
the Hot and Cold plate
Syrris Ltd. (Europe and Rest of World)
T: +44 (0)1763 242555
Syrris Inc. (North America)
T: 617 848 2997
Syrris Japan, Inc.
T: 045 263 8211
Syrris Brasil
T: +55 11 5083 4963
Syrris India
T: +91 22 2686 4410