THE INTERNATIONAL CATALOG
CN06-2uk
(all previous editions obsolete)
1
ASTM D 5
Penetration of Bitumous Material
See other applications under ASTM D 217 - D 937 - D 1321 - D 1403
SCOPE
This test method covers the determination of the penetration of semi-solid
and solid bitumous materials.
OTHER STANDARDS
IP 49 - NFT 66004 - ISO 3997 - DIN 52010
REF. 941734
This compact automated instrument uses the latest electronic technologies. It is equipped with keyboard, LCD display, user friendly software and
stepper motor for penetration depth as low as 0.01 mm, needle (or cone)
holder, magnifying lens and low voltage illuminator, centering guide, RS232C
output and accessories for automatic level detection for conductive samples.
941734 - AUTOMATIC PENETROMETER
230
V
1
A
50
Hz
23
Kg
w 260 mm
d 320 mm
h 540 mm
on request
115V 60Hz
picture not mandatory
941731 - MANUAL PENETROMETER
REF. 941731
This manual penetrometer includes a large table on levelling feet with spirit
level, a manual release mechanism and a dial indicator in 0.1 mm.
Outfit (needle, holder, sample container, ...) not included.
REF. 9417582
This compact twin-unit automated grease worker uses electronic counter
to control the strokes number and is delivered with 2 cups and 2
thermometers. Supply 400V 3ph.
5.6
Kg
w 180 mm
d 180 mm
h 560 mm
ACCESSORIES (for all standards)
27794
941732
11504
11532
11533
Water bath model RE 112 (max.100°C)
Calibration kit f or automatic penetrometer
A STM thermometer 17C
A STM thermometer 63C
A STM thermometer 64C
picture not mandatory
941810 - OUTFIT FOR BITUMEN
BITUMEN ACCESSORIES (for D5)
518063
941737
941810
941812
941815
9418140
21712
518066
9418181
9418191
9417371
outfit is
Standard needle 2.5 g (up to 350 u.)
Holder 47.5 g
Outf it f or penetration of bitumous material
A dditional w eight 100 g
A dditional w eight 50 g
Long needle 2.5 g (up to 500 u.)
Sample container one use 55x35 mm (pack of 300)
Sample container A luminium 55x35 mm
Sample container A l. 55x70 mm (>200 u.)
Sample container A l. 55x57 mm (up to 500 u.)
Bitumen automatic level detection device
picture not mandatory
941736 - OUTFIT FOR LUBRICATING GREASE
needle + holder + weight 50g + 2 containers
LUBRICATING GREASES ACCESSORIES (for D217)
941739
941736
941737
941738
941750
941751
941759
941760
9417411
9410759
27322
outfit is
Grease cutter w ith blade
Outf it f or consistency of lubricating grease
Holder 47.5 g
Standard cone 102.5 g
Hand grease w orker w ith cup and thermometer
Worker cup only
Plunger plate A STM (51 holes)
Plunger plate Fed. Spec. (270 holes)
Sample container 76x63 mm
Thermometer f or grease w orker
Spatula 30x200 mm
picture not mandatory
9417582 - GREASE WORKER
cone + holder + container
400/3ph V
3
A
50
Hz
29
Kg
w 400 mm
d 260 mm
h 500 mm
picture not mandatory
CN06-2uk
(all previous editions obsolete)
2
941735 - OUTFIT FOR PETROLATUM
ACCESSORIES (for D937)
941735
941737
941738
9417412
outfit is
Outf it f or consistency of petrolatum
Holder 47.5 g
Standard cone 102.5 g
Sample container 100x65 mm w ith cover
cone + container + holder
ACCESSORIES (for D1321)
941816
941737
941811
941815
941820
outfit is
Needle w ith shoulder 2.5 g
Holder 47.5 g
Outf it f or consistency of petroleum w axes
A dditional w eight 50 g
Sample container w ith base plate
picture not mandatory
941811 - OUTFIT FOR PETROLEUM WAXES
shouldered needle + container + weight + holder
ACCESSORIES (for D1403)
941742
941743
9417421
9417431
27322
¼ scale cone and plunger (9,38 g)
½ scale cone and plunger (37,5 g)
¼ scale grease w orker (manual operation)
½ scale grease w orker (manual operation)
Spatula 30x200 mm
SPARE PARTS FOR ALL MODELS
518063
941816
941737
941738
Standard needle 2.5 g (up to 350 u.)
Needle w ith shoulder 2.5 g
Holder 47.5 g
Standard cone 102.5 g
9417341
Light bulb for ref. 941734
9417342
9417343
Flexible light f or ref . 941734
Magnif ying glass f or ref . 941734
picture not mandatory
9417421 - GREASE WORKER FOR ¼ CONE
9417431 - GREASE WORKER FOR ½ CONE
picture
picture not
not mandatory
mandatory
ASTM D 6
Loss on Heating of Oil and Asphaltic
Compounds
SCOPE
This test method covers the determination of the loss in mass (exclusive of
water) of oil and asphaltic compounds when heated.
OTHER STANDARDS
IP 45 - NFT 66011
REF. 941875
Strictly conform to ASTM requirements because of exclusive thermocouple sensor installed on the rotating shelf with the control thermometer, this
is a double wall illuminated oven with glass window, 9 place revolving shelf,
9 aluminium containers, thermometer and instruction manual.
ACCESSORY
9418172
Sample container brass nickel plated
SPARE PARTS
21712
9418762
11500
Sample container one use 55x35 mm (pack of 300)
Bulb 230V /15W
A STM thermometer 13C
941875 - REVOLVING-SHELF OVEN
230
V
16
A
50
Hz
55
Kg
w 640 mm
d 580 mm
h 680 mm
picture not mandatory
CN06-2uk
(all previous editions obsolete)
3
ASTM D 36
Softening Point of Bitumen (Ring and Ball)
SCOPE
This test method covers the determination of the softening point of bitumen
in the range from 30 to 157°C using the ring and ball apparatus immersed
in distilled water (30 to 80°C), glycerin (80 to 157°C), or ethylene glycol (30
to 110°C).
OTHER STANDARDS
IP 58 - NFT 66008 - ISO 4625 - DIN 52011
REF. 20761
20761 - MANUAL TESTER
Ring and ball apparatus two-test unit including frame for 2 rings with centering
guide, a pack of 10 shouldered rings, a pack of 10 balls, one beaker, one
15C thermometer and one 16C thermometer.
ACCESSORY
26302
Electric stirrer w ith heater type E
SPARE PARTS
20764
20765
25666
11502
11503
11565
20766
Straight rings (pack of 10)
Shouldered rings (pack of 10)
Conical rings (pack of 10)
A STM thermometer 15C
A STM thermometer 16C
A STM thermometer 113C
Balls (pack of 10)
REF. 40100
The NBA 440 model, fully automatic tester, is equipped with ticket printer,
Pt 100 probe and all equipment to perform test with shouldered rings.
picture not mandatory
40100 - AUTOMATIC RING & BALL NBA 440
SPARE PARTS
17487
20764
20765
25666
40103
40138
40139
40154
40390
20766
Calibrated beaker
Straight rings (pack of 10)
Shouldered rings (pack of 10)
Conical rings (pack of 10)
Detection lamp
Ring and ball craddle
Pt 100 probe f or NBA 440
Heating element (1000 W)
Printer paper Seyko DPU 414 (roll)
Balls (pack of 10)
CN06-2uk
(all previous editions obsolete)
230
V
10
A
50
Hz
20
Kg
w 260 mm
d 535 mm
h 500 mm
on request
115V 60Hz
picture not mandatory
4
ASTM D 56
Flash Point by Tag Closed Tester
SCOPE
This test method covers the determination of the flash point, by tag manual
and automated closed testers, of liquids with a viscosity below 9.5 cst at
25°C and a flash point below 93°C.
40600 - TAG CLOSED TESTER NTA 440
REF. 40600
The NTA 440 model, fully automatic tester, is equipped with ticket printer,
cup and cover, cup support, Pt 100 probe, detection cable and gas tubing.
OPTIONAL ACCESSORIES
23203
23204
Cryostat TLC 30 - 5 liters (-30/+60°C ±.1)
Cryostat TLC 40 - 11 liters (-45/+20°C ±.05)
SPARE PARTS
40613
40390
40318
40611
40610
40612
Electric ignitor (NCL440/NTA 440)
Printer paper Seyko DPU 414 (roll)
Pt 100 probe
Heating element 250W (each)
TA G cup
Detection cable
ASTM D 70
230
V
2.2
A
50
Hz
18
Kg
w 260 mm
d 535 mm
h 500 mm
on request
115V 60Hz
picture not mandatory
Density of Semi-Solid Bitumous Materials
(Pycnometer Method)
SCOPE
This test method covers the determination of the specific gravity and density of semi-solid bitumous materials, asphalts cements, and soft tar pitches
by use of a pycnometer.
OTHER STANDARD
NFT 66007
PYCNOMETER
REF. 24615
Thermostatic bath (capacity 16 l) made of stainless steel with cooling coil
and lid.
NECESSARY ACCESSORY
11532
A STM thermometer 63C
OPTIONAL ACCESSORIES
20847
23229
23230
24624
Pycnometer
Pycnometer
Pycnometer
Pycnometer
CN06-2uk
A ( 24/30 ml)
C ( 24/30 ml)
D ( 24/30 ml)
B ( 24/30 ml)
(all previous editions obsolete)
picture not mandatory
5
ASTM D 86
Distillation of Petroleum Products
See other applications under ASTM D 850 - D 1078
SCOPE
This test method covers the distillation of natural gasolines, motor gasiolines,
aviation gasolines, aviation turbine fuels, special boiling point spirits, naphtas,
white spirit, kerosines, gas oils, distillate fuel oils, and similar petroleum
products, utilizing either manual or automated equipment.
OTHER STANDARDS
IP 123 - NFM 07002 - ISO 3405 - DIN 51751
941228 - FRONT VIEW DISTILLATION (right)
REF. 941227
“Front View” distillation apparatus, single unit (receiver on left), with electric
heater and temperature control by variotronic, complete with 125 ml flask,
100 ml receiver, 2 thermometers, Ceran board 50 and 100 mm.
REF. 941228
“Front View” distillation apparatus, single unit (receiver on right), with electric heater and temperature control by variotronic, complete with 125 ml
flask, 100 ml receiver, 2 thermometers, Ceran board 50 and 100 mm.
REF. 942228
230
V
6
A
50
Hz
23
Kg
w 500 mm
d 450 mm
h 470 mm
on request
115V 60Hz
picture not mandatory
Distillation apparatus model NDI 210 (receiver on right), with electric heater
controlled by “Pulsotronic” and condenser bath regulated by electronic head
providing external cryostate connections, complete with 125 ml flask,
100 ml receiver, silicone stopper, 2 thermometers, Ceran board 50
and 100 mm.
SPARE PARTS
19422
200 ml dis tillation f las k (D1078)
19425
20348
24019
40049
40050
100 ml graduated receiver (D86)
Ceran board hole 50 mm
125 ml distillation f lask (D86)
Silicone stopper f or condenser (pack of 50)
Silicone stopper thermometer (pack of 50)
40078
40079
Karanape board (38 mm)
Karanape board (32 mm)
40101
11494
11495
Heating element (1000W)
A STM thermometer 7C
A STM thermometer 8C
OPTIONAL ACCESSORY
941251
Glass cooling bath f or 941227 and 228 (2l)
942228 - DISTILLATION APPARATUS
semi-automatic
230
V
6
A
50
Hz
21
Kg
w 380 mm
d 490 mm
h 620 mm
on request
115V 60Hz
picture not mandatory
DISTILLATION FLASK 125 ml REF. 24019
1 to 9 pieces
10 to 49 pieces
50 and more
CN06-2uk
(all previous editions obsolete)
6
ASTM D 86 continued
REF.40000
Model NDI 440, automatic stand alone unit operable through PC keyboard
and standard 17” colour screen or alternatively connectable to external existing Pentium PC with Windows software. Basic unit with distillation flasks
and CERAN boards as per mentioned methods, 100 ml receiver, 5 ml residue receiver, sensor adjuster, Pt 100 sensor, automatic dry point kit, printer
and more.
MAIN CONSUMABLES
19096
19420
19422
24019
26111
40052
40065
40067
40073
40078
40079
Seepage f ingers (pack of 10)
100 ml distillation f lask (D86 - gr 0)
200 ml distillation f lask (D1078)
125 ml distillation f lask (D86)
100 ml graduated receiver glass f oot (D86)
125 ml black bottom flask (D86)
Tef lon centering stopper f or Pt 100 probe
Tef lon centering stopper f or dry point
Dry point thermocouple
Karanape board (38 mm)
Karanape board (32 mm)
40000 - AUTOMATIC DISTILLATION NDI 440
230
V
9
A
50
Hz
60
Kg
w 480 mm
d 660 mm
h 550 mm
on request
115V 60Hz
picture not mandatory
REFERENCE FLUID (see page 76)
SPARE PARTS
12609
20348
21944
24019
27581
40043
40049
40076
40078
40079
40097
40390
5 ml graduated cylinder f or residue (D86)
Ceran board hole 50 mm
Ceran board hole 100 mm (NDI 440)
125 ml distillation f lask (D86)
Ceran board hole 25 mm (benzene-toluene D850)
200 ml black bottom flask (D1078)
Silicone stopper f or condenser (pack of 50)
Pt 100 f lask temperature measuring probe
Karanape board (38 mm)
Karanape board (32 mm)
Maintenance kit f or ND I440
Printer paper Seyko DPU 414 (roll)
40101
Heating element (1000W )
DISTILLATION FLASK 125 ml REF. 24019
1 to 9 pieces
10 to 49 pieces
50 and more
CN06-2uk
(all previous editions obsolete)
7
ASTM D 88
Saybolt Viscosity
See other application under ASTM D 244
SCOPE
This test method covers the empirical procedures for determining the Saybolt
Universal or Saybolt Furol Viscosities of petroleum products at specified
temperatures between 21 and 99°C.
27238 - SAYBOLT VISCOMETER
REF. 27238
1 place Saybolt viscometer, equipped with electric heater, automatic control of temperature, stirring motor for water circulation, possibility to cool
down the bath by means of an external cooling system. Supplied without
accessories.
NECESSARY ACCESSORIES
27243
27244
11438
Universal Saybolt tube <1000 sec
Furol Saybolt tube >1000 sec
Saybolt flask 60 ml
230
V
2
A
50
Hz
8
Kg
w 260 mm
d 260 mm
h 540 mm
picture not mandatory
ASTM D 91
Precipitation Number of Lubricating Oil
See other applications under ASTM D 96 - D 893 - D 1796 - D 2273 D 2709 - D 2711 - D 4007
SCOPE
This test method covers the determination of the precipitation number of
steam cylinder stocks and black oils, and can be used for other lubricating
oils.
REF. 29038
29038 - OIL TEST CENTRIFUGE
Model ROTANTA 460 without cooling/heating control is suitable for ASTM
D 91, D 893, D 2273, D 2709 et D 2711. Equipped with brushless motor
and controlled by microprocessor.
DELIVERED WITHOUT ACCESSORY.
REF. 29039
Model ROTANTA 460 RHK with cooling/heating control is suitable for ASTM
D 96 and D4007. Equipped with brushless motor and controlled by microprocessor.
DELIVERED WITHOUT ACCESSORY.
230
V
7
A
50/60
Hz
90
Kg
w 554 mm
d 707 mm
h 453 mm
NECESSARY ACCESSORIES
picture not mandatory
29040
29041
29042
19319
Rotor 4 places f or conical or pear tube
Groove suspension
Reducing adapter
8" cone-shaped tube (100 ml)
CN06-2uk
(all previous editions obsolete)
8
ASTM D 92
Flash and Fire Points by Cleveland Open Cup
SCOPE
This test method describes the determination of the flash point of petroleum products by a manual or automated cleveland open cup apparatus.
942611 - MANUAL CLEVELAND NCL 120
OTHER STANDARDS
IP 36 - NF EN ISO 2592
MANUAL INSTRUMENT
REF. 942611
This manual model NCL 120 includes cup and thermometer.
SPARE PARTS
941613
40154
941615
941609
11498
9417444
230
V
0.3
A
50
Hz
7
Kg
w 350 mm
d 250 mm
h 430 mm
Cleveland cup w ith handle
Heating element (1000W)
Stoptherm insulating board
Gas tubing diam. 2/4 mm (1 m)
A STM thermometer 11C
Gloves (pair)
SEMI-AUTOMATIC INSTRUMENT
REF. 942610
The semi-automatic tester NCL 220 is equipped with electronic regulator,
and cup. The temperature slope is automatically controlled by Pt100 probe.
SPARE PARTS
941613
9417908
40154
941609
941615
Cleveland cup w ith handle
Pt 100 probe (70x3 mm)
Heating element (1000 W)
Gas tubing diam. 2/4 mm (1 m)
Stoptherm insulating board
9417444
Gloves (pair)
picture not mandatory
942610 - SEMI-AUTO CLEVELAND NCL 220
230
V
0.3
A
50
Hz
10
Kg
w 350 mm
d 250 mm
h 330 mm
picture not mandatory
AUTOMATIC INSTRUMENT
REF. 40400
40400 - AUTOMATIC CLEVELAND NCL 440
The fully automatic tester NCL 440 is equipped with ticket printer, Pt 100,
cup, detection cable, gas tubing and RS232C output. It is provided with
gas and electrical ignition system.
OPTIONAL ACCESSORY
40440
6 cups automatic sampler
REFERENCE FLUID (see page 76)
SPARE PARTS
40154
40613
40390
40437
40417
40439
40441
40443
40444
Heating element (1000 W)
Electric ignitor (NCL440/NTA 440)
Printer paper Seyko DPU 414 (roll)
Insulated plate - f ixed
Standard Cleveland cup
Insulated plate - mobile
Pt 100 probe
Ionization ring f lash point
Ionization ring f ire point
230
V
0.3
A
50
Hz
17
Kg
w 320 mm
d 580 mm
h 360 mm
on request
115V 60Hz
40440 - AUTO-CLEVELAND WITH SAMPLER
230
V
0.3
A
50
Hz
17
Kg
w 320 mm
d 580 mm
h 360 mm
on request
115V 60Hz
CN06-2uk
(all previous editions obsolete)
picture not mandatory
picture not mandatory
9
ASTM D 93
Flash Point by Pensky-Martens Closed Cup
SCOPE
This test method covers the determination of the flash point of petroleum
products in the temperature range from 40 to 360°C by manual or automated Pensky-Martens closed cup apparatus.
OTHER STANDARDS
IP 34 - NF EN ISO 2719 - DIN 51758
MANUAL INSTRUMENTS
REF. 942614 / 615
Models NPM 120, manual instruments, are delivered complete with cup
and cover, thermometers and stirrer. Those models are cooled by air and
equipped with a safety thermostate. Model 942614 follows method A and
model 942615 method B.
REF. 942616
942614/615 - PENSKY-MARTENS NPM 120
Manual apparatus
230
V
6
A
50
Hz
10
Kg
w 350 mm
d 250 mm
h 380 mm
Model NPM 121, manual instrument, is delivered complete with cup and
cover, thermometers and stirrer. This model is cooled by air and equipped
with a safety thermostate.This model follows method A and B.
picture not mandatory
SPARE PARTS
941609
941621
9417444
9411930
Tube gaz diam. 2/4 mm (1 m)
Heating cartridge 230V (400W)
Gloves (pair)
Cup f or NPM 120, 121, 220, 221
9411931
Cover for NPM 120, 121, 220, 221
11496
11497
A STM thermometer 9C
A STM thermometer 10C
942616 - PENSKY-MARTENS NPM 121
Manual apparatus
230
V
6
A
50
Hz
10
Kg
w 350 mm
d 250 mm
h 380 mm
picture not mandatory
SEMI-AUTOMATIC INSTRUMENTS
REF. 942617 / 618
Models NPM 220, semi-automatic instruments, are delivered complete with
cup and cover, Pt100 probe and stirrer. Those models are cooled by air and
equipped with a safety thermostate. The temperature slope is automatically controlled. Model 942617 follows method A and model 942618
method B.
REF. 942619
The model NPM 221, semi-automatic instrument, is delivered complete
with cup and cover, Pt100 probe and stirrer. Those models are cooled by
air and equipped with a safety thermostate.The temperature slope is automatically controlled. This model follows method A and B.
942617/618 - PENSKY-MARTENS NPM 220
Semi-automatic apparatus
230
V
6
A
50
Hz
10
Kg
w 350 mm
d 250 mm
h 380 mm
SPARE PARTS
941609
Tube gaz diam. 2/4 mm (1 m)
941621
Heating cartridge 230V (400W)
9411930
9411931
9417444
9417908
Cup f or NPM 120, 121, 220, 221
Cover f or NPM 120, 121, 220, 221
Gloves (pair)
Pt 100 probe (70x3 mm)
picture not mandatory
942619 - PENSKY-MARTENS NPM 221
Semi-automatic apparatus
230
V
6
A
50
Hz
10
Kg
w 350 mm
d 250 mm
h 380 mm
picture not mandatory
CN06-2uk
(all previous editions obsolete)
10
AUTOMATIC INSTRUMENT
REF. 40300
40300 - AUTO PENSKY-MARTENS NPM 440
The NPM 440 model, fully automatic tester, is delivered complete with cupand
cover, Pt 100 probe, flexible stirrer, gas or electrical ignition system, PC serial
port and ticket printer. Software allows choice of 6 methods, automatic barometric correction, full safeties, 2 stirring speeds, ...
OPTIONAL ACCESSORY
14110
Tube f or propane gas 6x12 mm (10 m)
REFERENCE FLUID (see page 76)
SPARE PARTS
40346
40347
40349
40351
40353
Cup f or NPM 440
Cover w ithout probe f or NPM 440
Stirring connection cable
Detection cable
Pt 100 f or NPM 440
40380
Electric ignitor (NPM 440)
40390
Printer paper Seyko DPU 414 (roll)
ASTM D 95
230
V
4
A
50
Hz
20
Kg
w 260 mm
d 535 mm
h 500 mm
on request
115V 60Hz
picture not mandatory
Water in Petroleum Products and Bitumous
Materials by Distillation
SCOPE
This test method covers the determination of water in petroleum products,
tars, and other bitumous materials by the distillation method.
OTHER STANDARDS
IP 74 - NFT 60113 - ISO 3733
REF. 21454
21454 - WATER BY DISTILLATION APPARATUS
Complete assembly with heating mantle, glass flask 500 ml and Liebig
condenser 400 mm and all assembly accessories.
SPARE PARTS
12852
13142
14571
16252
16324
16329
19357
21003
21455
21456
Round bottom f lask CN24/29 (500 ml)
Liebig condenser CN24/29 (400 mm)
Heating mantle 500 ml (230V /225W)
Clamp
Stand w ith rod 12 x 800 mm
Universal bosshead for assembly
Dean Stark trap (10ml in 0.1)
Pulse regulator (2200 W)
5 ml : 1/10 Dean Stark w ith round bottom
25 ml : 1/5 Dean Stark w ith conical bottom
CN06-2uk
(all previous editions obsolete)
picture not mandatory
11
ASTM D 96
Water and Sediment in Crude Oil by
Centrifuge Method
See instrument under ASTM D 91
SCOPE
This test method covers the centrifuge method for determining sediment
and water in crude oil during field custody transfers.
ASTM D 97
Pour Point of Petroleum Products
See other application under ASTM D 2500
SCOPE
This test method is intended for use on any petroleum product.
OTHER STANDARDS
IP 15 - NFT 60105 - ISO 3016
REF. 941584
941592 - CLOUD & POUR CABINET (0 to -51°C)
Single temperature bath with 5 wells, stirrer and 6 thermometers 5C.
Cooled by dry ice.
ACCESSORY
941597
Dry ice machine
REF. 941592
Cloud and pour test cabinet, mechanically refrigerated by CFC free gases,
4 compartments (0, -17, -34, -51 °C), each with 4 sleeves including test
tubes, felts, 15 thermometers 5C and 5 thermometers 6C.
REF. 941595
Cloud and pour test cabinet, mechanically refrigerated by CFC free gases,
1 compartment (-69 °C), with 4 sleeves including test tubes, felts, thermometers 5C and thermometer 6C.
230
V
16
A
50
Hz
190
Kg
w 1000mm
d 750 mm
h 1420 mm
picture not mandatory
REFERENCE FLUID (see page 76)
SPARE PARTS
19439
9415901
9415902
11492
11493
11530
Test tube
Felt disc (pack of 10)
Felt ring (pack of 10)
A STM thermometer 5C
A STM thermometer 6C
A STM thermometer 61C
AUTOMATIC MODEL ON REQUEST
CN06-2uk
(all previous editions obsolete)
12
ASTM D 113
Ductility of Bituminous Materials
SCOPE
The ductility of a bituminous material is measured by the distance to which
it will elongate before breaking when two ends of a briquet specimen of the
material are pulled apart at a specified speed and temperature.
OTHER STANDARDS
NFT 66006 - DIN 52013
REF. 9418641
Ductility machine with electronic regulation and digital display measurement,
for three simultaneous tests at variable speeds of 1 to 99 mm/min by step
of .1 mm, maximum pull length : 100 cm
REF. 9418642
Ductility machine with electronic regulation and digital display measurement,
for three simultaneous tests at variable speeds of 1 to 99 mm/min by step
of .1 mm, maximum pull length : 150 cm
ACCESSORIES
23203
Cry os tat TLC 30 - 5 liters (-30/+60°C ±.1)
941867
Transparent cover f or ductility meter
9418641 - DUCTILITY MACHINE (1 meter)
230
3
50
70
w 1700
d 330
h 310
V
A
Hz
Kg
mm
mm
mm
picture not mandatory
SPARE PARTS
941868
941869
941866
941865
11532
Mould w ithout brass plate
Brass plate
Opal glass f or ductility meter 100 cm
Opal glass f or ductility meter 150 cm
A STM thermometer 63C
ASTM D 129
Sulfur in Petroleum Products
(general Bomb Method)
See instrument under ASTM D 240
SCOPE
This test method covers the determination of sulfur in petroleum products,
including lubricating oils containing additives, additive concentrates, and lubricating greases that cannot be burned completely in a wick lamp.
OTHER STANDARDS
IP 61 - NFT 60109 - DIN 51577
CN06-2uk
(all previous editions obsolete)
13
ASTM D 130
Detection of Copper Corrosion from
Petroleum Products
SCOPE
This test method covers the detection of the corrosiveness to copper of
aviation gasoline, aviation turbine fuel, automotive gasoline, natural gasoline or other hydrocarbons having a Reid vapor pressure no greater than 18
psi.
OTHER STANDARDS
IP 154 - NFM 07015 - ISO 2160 - DIN 51811
REF. 941220
941220 - TEST BATH FOR D130
Constant temperature test bath with plain cover and drain cock, controlled
by electronic thermostat, Pt 100 sensor and led heating control
(max 100°C).
NECESSARY ACCESSORIES FOR ASTM D 130
12780
24541
15114
15115
19008
941492
12067
9413109
9413125
11499
22505
Test tube 25x150mm
Single strip polishing vise
Copper strip corrosion test standard
Copper strip (pack of 10)
Flat glass test tube
Test cylinder
Silicon carbide paper 240 grits
Support to hold 12 stainless steel vessel
Support to hold 40 test tubes
A STM thermometer 12C
Silicon carbide pow der 150 mesh (1 kg)
230
V
0.3
A
50
Hz
15
Kg
w 375 mm
d 260 mm
h 417 mm
picture not mandatory
15114 - CORROSION TEST STANDARD
SPARE PARTS
12780
19008
941492
9412209
9414920
Test tube 25x150mm
Flat glass test tube
Test cylinder
Heating element (1500 W)
"O" ring seals (pack of 10)
9417900
Pt 100 probe (30x6 mm)
22505
Silicon carbide pow der 150 mesh (1 kg)
NECESSARY ACCESSORIES FOR IP 227
24541
941224
9414851
12067
9414931
Single strip polishing vise
Cover including 3 test tubes (amber)
Silver strip assaying at 99.9%
Silicon carbide paper 240 grits
Silver strip corrosion standard
12007
Kit condenser complete (amber glass)
11499
22505
A STM thermometer 12C
Silicon carbide pow der 150 mesh (1 kg)
SPARE PARTS
9414851
9412209
12008
12376
12377
9417900
11499
Silver strip assaying at 99.9%
Heating element (1500 W)
Craddle (amber glass)
Test tube (amber glass)
Cold-f inger condenser (amber glass)
Pt 100 probe (30x6 mm)
A STM thermometer 12C
CN06-2uk
(all previous editions obsolete)
picture not mandatory
941220 - TEST BATH FOR IP 227
230
V
0.3
A
50
Hz
17
Kg
w 375 mm
d 260 mm
h 417 mm
picture not mandatory
14
ASTM D 156
Saybolt Color of Petroleum Products
SCOPE
This test method covers the determination of the color of refined oils such
as undyed motor and aviation gasoline, jet propulsion fuels, naphtas and
kerozine, and, in addition, petroleum waxes and pharmaceutical white oils.
OTHER STANDARDS
NFM 07003 - DIN 51411
941520 - SAYBOLT CHROMOMETER
REF. 941520
Complete improved model with daylight source built-in the base and a 3position turret assembly (½, 1 and 2) with certified Saybolt filters reducing
the time required to make a determination and eliminating the handling of
the standard filters and the possibility of loss and damage.
REF. 941521
Same model as above but with specific heating tube for petroleum waxes.
Maximum temperature of use 100 °C.
SPARE PARTS
941524
941525
941526
9415203
9415206
9415221
9415222
9415240
Prismatic eyepiece
Matched pair of tubes
Matched pair of tubes f or w axes
A rtif icial daylight f ilter w ith certif icate
Spare bulb
O ring f or graduated tube (pack of 10)
Seal f or glass disk (pack of 10)
Filter w heel w ith certif icate
941521 -
AUTOMATIC APPARATUS
REF. 29006
ON REQUEST
The Lovibond PFX 880/P is an easy to use, automatic instrument, which
eliminates time-consuming procedures of visual methods. It is a spectrophotometer for objective colour analysis of petroleum fuels, oils, waxes
and petrochemicals according to the Saybolt and ASTM Colour scales
CN06-2uk
(all previous editions obsolete)
230
V
0.3
A
50
Hz
8
Kg
w 180 mm
d 180 mm
h 760 mm
on request
115V 60Hz
230
V
1
A
50
Hz
8
Kg
w 180 mm
d 180 mm
h 760 mm
on request
115V 60Hz
picture not mandatory
SAYBOLT CHROMOMETER FOR
PETROLEUM WAXES
picture not mandatory
15
ASTM D 189
Conradson Carbon Residue of Petroleum
Products
See other application under ASTM D 4530
SCOPE
This test method covers the determination of the amount of carbon residue
left after evaporation and pyrolisis of an oil. It is intended to provide some
indication of relative coke-forming propensities. The method is generally
applicable to relatively non volatile petroleum products which partially decompose on distillation at atmospheric pressure.
OTHER STANDARDS
NFT 60116 - IP 13 - ISO 6615 - DIN 51551
REF. 941653
Single unit model to be manually used including: porcelain crucible, skidmore
crucible with cover, steel outer crucible with lid, support triangle, holder,
chimney stand and the gas burner.
941653 - CARBON RESIDUE APPARATUS
SPARE PARTS
10702
941661
941664
941665
941666
15150
27083
Glass balls diam. 2mm (1 kg)
Skidmore crucible w ith brass lid
Steel outer crucible
Metallic hollow ring
Chimney w ith guide
Porcelain Conradson crucible (pack of 12)
Meker gas burner (butane/propane)
8
Kg
w 250 mm
d 250 mm
h 500 mm
picture not mandatory
ASTM D 217
Cone Penetration of Lubricating Grease
See instruments under ASTM D 5
SCOPE
This test method covers four procedures for measuring the consistency of
lubricating greases by the penetration of a cone of specified dimension,
mass, and finish. The penetration is measured in 1/10 of a millimeter.
OTHER STANDARDS
IP 50 - NFT 60132 - ISO 2137 - DIN 51580
ASTM D 240
Heat of Combustion of Liquid Hydrocarbon
Fuels by Bomb Calorimeter
See other applications under ASTM D 129 - D 808
SCOPE
This test method covers the determination of the heat of combustion of
liquid hydrocarbon fuels ranging in volatillty from that of light distillates to
that of residual fuels.
QUOTATION ON REQUEST
CN06-2uk
(all previous editions obsolete)
16
ASTM D 287
API Gravity of Crude Petroleum and
Petroleum Products (Hydrometer Method)
See other applications under ASTM D 941 - D 1217 - D 1298 - D1480
SCOPE
This test method covers the determination by means of a glass hydrometer
of the API gravity of crude petroleum and petroleum products normally handled as liquids and having a Reid vapor pressure no greater than 26 psi.
OTHER STANDARD
ISO 3675
REF. 14854
14854 - 6 UNIT RAMP
6-unit ramp in stainless steel
ACCESSORIES (for all standards)
10013
10741
15287
15288
Spare glassw are w ith cock
Density cylinder 500 ml
A FNOR thermometer, -15 to +45°C
A FNOR thermometer, +35 to +85°C
ACCESSORIES (ASTM D287)
20800
20801
20802
20803
20804
20805
20806
20807
20808
20809
Hydrometer
Hydrometer
Hydrometer
Hydrometer
Hydrometer
Hydrometer
Hydrometer
Hydrometer
Hydrometer
Hydrometer
A PI 1H / -1 to 11
A PI 2H / 9 to 21
A PI 3H / 19 to 31
A PI 4H / 29 to 41
A PI 5H / 39 to 51
A PI 6H / 49 to 61
A PI 7H / 59 to 71
A PI 8H / 69 to 81
A PI 9H / 79 to 91
A PI 10H / 89 to 101
20800 - API HYDROMETER 1H
ACCESSORY (ASTM D941)
19386
picture not mandatory
Lipkin density bottle
ACCESSORY (ASTM D1217)
19393
25 ml Bingham density bottle
ACCESSORIES (ASTM D1298)
20810
20811
20812
20813
20814
20815
20816
20817
20818
20819
20820
20821
20822
20823
20824
20825
20826
20827
20828
20829
Hydrometer (L50) /
Hydrometer (L50) /
Hydrometer (L50) /
Hydrometer (L50) /
Hydrometer (L50) /
Hydrometer (L50) /
Hydrometer (L50) /
Hydrometer (L50) /
Hydrometer (L50) /
Hydrometer (L50) /
Thermohydrometer
Thermohydrometer
Thermohydrometer
Thermohydrometer
Thermohydrometer
Thermohydrometer
Thermohydrometer
Thermohydrometer
Thermohydrometer
Thermohydrometer
0,600-0,650
0,650-0,700
0,700-0,750
0,750-0,800
0,800-0,850
0,850-0,900
0,900-0,950
0,950-1,000
1,000-1,050
1,050-1,100
A PI 51H / -1 to 11
A PI 52H / 9 to 21
A PI 53H / 19 to 31
A PI 54H / 29 to 41
A PI 55H / 39 to 51
A PI 56H / 49 to 61
A PI 57H / 59 to 71
A PI 58H / 69to 81
A PI 59H / 79 to 91
A PI 60H / 89 to 101
picture not mandatory
941123 - WATER BATH
230
V
4
A
50
Hz
7.5
Kg
w 350 mm
d 260 mm
h 300 mm
picture not mandatory
OPTIONAL
941123
Water bath f or hydrometer
CN06-2uk
(all previous editions obsolete)
17
ASTM D 323
Vapor Pressure of Petroleum Products
(Reid Method)
SCOPE
This test method covers procedures for the determination of vapor pressure of gasoline, volatile crude oil, and other volatile petroleum products.
OTHER STANDARDS
IP 69 - NFM 07007 - ISO 3007 - EN 12
941432 - THERMOSTATIC BATH (3 place)
REF. 941432
Electronic constant thermostatic bath, 3 vessels capacity, with thermometer and digital display. Equipped with adjustable stirring device, low water
cut-off, cooling coil for external cryostat and drain cock.
REID VESSELS WITH SCREW COUPLING
941401
941405
RV P screw coupling test vessel (below 26 lb)
RV P screw coupling test vessel (above 26 lb)
REID VESSELS WITH QUICK COUPLING
941411
941415
RV P quick coupling test vessel (below 26 lb)
RV P quick coupling test vessel (above 26 lb)
230
V
16
A
50
Hz
30
Kg
w 470 mm
d 470 mm
h 860 mm
on request
115V 60Hz
picture not mandatory
REID VAPOUR PRESSURE GAGES (psi and KPa)
941420
941421
941422
941423
941424
9414211
Metallic
Metallic
Metallic
Metallic
Metallic
Metallic
manometer
manometer
manometer
manometer
manometer
manometer
0
0
0
0
0
0
to
to
to
to
to
to
5 psi/34 kPa
15 psi/100 kPa
45 psi/300 kPa
60 psi/400 kPa
100 psi/650 kPa
30 psi/200 kPa
941401 - VESSEL WITH SCREW COUPLING
OPTIONAL ACCESSORIES
941410
25755
9414283
Saf ety burst disk capsule (add on vessel price)
Mercury manometer
Connection f or mercury manometer
SPARE PARTS
941402
941403
941407
941413
941417
941427
941435
9414101
9417905
A ir chamber (screw )
Gasoline chamber w ith one opening (screw )
Gasoline chamber w ith tw o valves (screw )
Gasoline chamber w ith one opening (q. coupling)
Gasoline chamber w ith tw o valves (q. coupling)
Tef lon gaskets f or test vessel (2 packs of 12)
Heating element (2000 W)
Spare disc f or saf ety capsule
Pt 100 probe (250x5 mm)
picture not mandatory
941411 - VESSEL WITH QUICK COUPLING
picture not mandatory
CN06-2uk
(all previous editions obsolete)
18
ASTM D 381
Existent Gum in Fuels by Jet Evaporation
941303 - AIR AND STEAM JET GUM BATH
SCOPE
This test method covers the determination of the existent gum content of
aviation fuels, and the gum content of motor gasolines or other volatile distillates in their finished form, and at the time of test.
OTHER STANDARDS
IP 131 - NFM 07004 - ISO 6246 - DIN 51776
REF. 941302
This model, air jet only with 5 wells, includes electronic temperature control
and flowmeter, thermometer 3C, beakers, conical outlets.
230
V
16
A
50
Hz
60
Kg
w 770 mm
d 380 mm
h 570 mm
picture not mandatory
REF. 941303
This model, air and steam jet with 5 wells, includes electronic temperature
control and flowmeter, steam superheater, thermometer 3C, beakers, conical
outlets.
ACCESSORIES
12875
941301
941304
941307
941308
9413080
Filter f unnel 125 ml
A ir calibration kit f or 941302/941303
V apour calibration kit f or 941303
Overpressure pump f or steam generator
Steam generator (400V - 3 ph)
A ir compressor 2 stages 300 l (400V - 3 ph)
941302 - AIR JET GUM BATH
230
16
50
45
w 770
d 380
h 570
V
A
Hz
Kg
mm
mm
mm
SPARE PARTS
16138
Test cell
941306
9417444
9413023
9413031
9417834
9417900
9417904
11491
Conical air outlet
Gloves (pair)
Heating element f or metallic bath
Superheater f or 941303 apparatus
Pt 100 probe (60x3.15 mm) for aluminium block
Pt 100 probe (30x6 mm) for calibration kit
Pt 100 probe (160x5 mm) for superheater
A STM thermometer 3C
picture not mandatory
941308 - STEAM GENERATOR
400 V - 3ph
20
A
50
Hz
75
Kg
w 750 mm
d 530 mm
h 920 mm
picture not mandatory
9413080 - AIR COMPRESSOR
400 V - 3 ph
7
A
50
Hz
125
Kg
w 760 mm
d 600 mm
h 1670 mm
picture not mandatory
941301 and 941304 - CALIBRATION KIT
230
V
0.3
A
50
Hz
5
Kg
w 680 mm
d 340 mm
h 180 mm
picture not mandatory
CN06-2uk
(all previous editions obsolete)
19
ASTM D 445
Kinematic Viscosity of Transparent and
Opaque Liquids
SCOPE
This test method specifies a procedure for the determination of the kinematic viscosity of liquid petroleum products, both transparent and opaque,
by measuring the time for a volume of liquid to flow under gravity through a
calibrated glass capillary viscometer.
OTHER STANDARDS
IP 71 - ISO 3104 - DIN 51366
REF. 60100
Normalab Analis Fully Automatic Houillon viscometer - Model NVH 450 - Plug and play equipment : no external connexion for use above ambient
- 4 tubes in the same bath
- Measuring range from 0.2 to 5000 cSt
- Temperature range from 40 to 120°C (optional chiller can be connected)
- Automatic tube cleaning
Our New automatic Houillon viscometer NVH 450 combines the advantages of a quick and economical standard method for viscosity measurement with the latest improvements in technology to reach comfort of use
and accuracy. 4 tests can be launched simultaneously and apart from sample introduction, all the operations are driven by the internal CPU.
60100 - HOUILLON VISCOMETER NVH 450
230
V
16
A
50/60
Hz
75
Kg
w 540 mm
d 340 mm
h 760 mm
picture not mandatory
NVH 450 is delivered with cleaning system and pump included.
Silicone oil, tubes and pipettes to be ordered separately
TUBE NVH 450
ACCESSORIES
24022
24958
Glasstube for sampling and sample introduction
Sampling Micro pipet
24960
27775
Cone for pipet (pack of 1000)
Demineralized w ater below 50°C (can of 20 l)
60101
60135
60136
Silicon oil (20 l)
Modified thermometer 120C for NVH 450
Modified thermometer 121C for NVH 450
VISCOSITY STANDARDS (see page 25)
SPARE PARTS
60102
60103
60104
Vacuum pump PM 9999
Burker SV 2 w ays
Burker SV 3 w ays
60105
60107
Gasket for cleaning clamp
Waste bottle w ith cover and gasket
60108
60113
60114
Solvent bottle w ith cover and gasket
Safety w aste bottle w ith cover and gasket
Complete cleaning clamp
picture not mandatory
OPTIONAL ACCESSORIES
40390
Printer paper Seyko DPU 414 (roll)
40386
Printer DPU 414 and cable
HOUILLON VISCOMETER TUBES
60151
Houillon tube size 50 w ithout certificate
60152
Houillon tube size 75 w ithout certificate
60153
Houillon tube size 100 w ithout certificate
60154
Houillon tube size 150 w ithout certificate
60155
Houillon tube size 200 w ithout certificate
60156
Houillon tube size 300 w ithout certificate
60157
Houillon tube size 350 w ithout certificate
60158
Houillon tube size 400 w ithout certificate
60159
Houillon tube size 450 w ithout certificate
60160
Houillon tube 45 cSt w ithout certificate
HOUILLON VISCOMETER NVH 450 - screen shot
picture not mandatory
CN06-2uk
(all previous editions obsolete)
20
REF. 17915
23829 - VISCOSITY BATH (5 places)
Constant temperature viscosity bath “ROUTINE” (max. 100°C) with glass
jar of 20 liters, thermometer for temperature reading and 5 places for common viscometers (support not included).
REF. 23829
Constant temperature viscosity bath “ROUTINE” (max. 200°C) with glass
jar of 20 liters, digital temperature display and 5 places for common
viscometers (support not included).
REF. 941131
230
V
10
A
50
Hz
17
Kg
w 320 mm
d 580 mm
h 360 mm
Constant temperature viscosity bath “PRECISION” (max. 120°C) with glass
jar of 30 liters, electronic digital temperature control and 8 places turntablefor
common viscometers (support not included).
SPARE PARTS
941132
9411302
9417904
941131 - VISCOSITY BATH (8 places)
Heating element f or ref . 941131 (2000 W)
Borosilicate glass jar(300 x 450 mm)
Pt 100 probe (160x5 mm)
NECESSARY ACCESSORIES
10567
10568
10569
picture not mandatory
Suspension stainless steel f or Ubbelohde
Suspension nylon f or Cannon
Suspension nylon f or Ubbelohde
REFERENCE FLUID (see page 76)
230
V
10
A
50
Hz
35
Kg
w 520 mm
d 380 mm
h 700 mm
OPTIONAL ACCESSORIES
13539
16419
16427
21375
Support f or 6 viscometer tubes
Silicone oil up to 150°C (5 l)
Mineral oil max 100°C (5 l)
Electronic stopw atch
10025
10026
ASTM thermometer 120C
ASTM thermometer 121C
picture not mandatory
REF.18450
VISCOMETER WASHER supplied with 6 nozzle stoppers. This apparatus
is allowed for external and internal washing of all current types of viscometer
tubes. The viscometer tubes are suspended in BIOSANE T215 solvent
vapors at 80°C.
- Very fast cleaning for 6 viscometer tubes in 5 to 15 min
- Negligible solvent consumption
18450 - AUTOMATIC VISCOMETER WASHER
ALV 110
SPARE PARTS
18453
18454
18455
21694
Heating element
Injector stopper
Glass cleaning bath
Heating controller
RECOMMENDED SOLVENT
25699
Biosane T215 solvent (5 l)
230
V
16
A
50
Hz
30
Kg
w 400 mm
d 400 mm
h 1000 mm
picture not mandatory
CN06-2uk
(all previous editions obsolete)
21
ASTM D 445 continued
VISCOMETER TUBES (all with calibration certificate)
1. Ubbelohde viscometer for transparent liquids
14030
14031
14032
14034
14035
14036
14037
14038
14039
14041
14042
14043
14044
14045
13993
13994
0,3 to 1 cSt - size 0
0,6 to 3 cSt - size 0C
1 to 5 cSt - size 0B
2 to 10 cSt - size 1
6 to 30 cSt - size 1C
10 to 50 cSt - size 1B
20 to 100 cSt - size 2
60 to 300 cSt - size 2C
100 to 500 cSt - size 2B
200 to 1000 cSt - size 3
600 to 3000 cSt - size 3C
1000 to 5000 cSt - size 3B
2000 to 10000 cSt - size 4
6000 to 30000 cSt - size 4C
10000 to 50000 cSt - size 4B
20000 to100000 cSt - size 5
1. Ubbelohde
2. Cannon-fenske routine viscometer for transparent liquids
14002
14003
14004
14005
14006
14007
14008
14009
14010
14011
14012
14013
14014
14015
0,4 to 2 cSt - size 25
0,8 to 4 cSt - size 50
1,6 to 8 cSt - size 75
3 to 15 cSt - size 100
7 to 35 cSt - size 150
20 to 100 cSt - size 200
50 to 200 cSt - size 300
100 to 500 cSt - size 350
240 to 1200 cSt - size 400
500 to 2500 cSt - size 450
1600 to 8000 cSt - size 500
4000 to 20000cSt - size 600
10000 à 40000 cSt - size 650
20000 à 80000 cSt - size 700
2. Cannon-fenske
3. Cannon-fenske reverse flow viscometer for opaque liquids
14016
14017
14018
14019
14020
14021
14022
14023
14024
14025
14026
14027
14028
14029
0,4 to 2 cSt - size 25
0,8 to 4 cSt - size 50
1,6 to 8 cSt - size 75
3 to 15 cSt - size 100
7 to 35 cSt - size 150
20 to 100 cSt - size 200
50 to 200 cSt - size 300
100 to 500 cSt - size 350
240 to 1200 cSt - size 400
500 to 2500 cSt - size 450
1600 to 8000 cSt - size 500
4000 to 20000cSt - size 600
10000 à 40000 cSt - size 650
20000 à 80000 cSt - size 700
3. Cannon-fenske
4. BS / IP U RF viscometer for opaque liquids
18670
18671
18672
18673
18674
18675
18676
18677
18678
18679
18680
0.6 to 3 cSt - size 1
2 to 10 cSt - size 2
6 to 30 cSt - size 3
20 to 100 cSt - size 4
60 to 300 cSt - size 5
200 to 1000 cSt - size 6
600 to 3000 cSt - size 7
2000 to 10000 cSt - size 8
6000 to 30000 cSt - size 9
20000 to 100000 cSt - size 10
60000 to 300000 cSt - size 11
4. BS / IP U RF
ALL ABOVE VISCOMETERS CAN BE SUPPLIED
WITHOUT CERTIFICATE ON SPECIAL REQUEST
CN06-2uk
(all previous editions obsolete)
22
VISCOMETER TUBES (all with calibration certificate)
5. Houillon viscometer for transparent liquids
13932
13933
13934
13935
13936
13937
13938
13939
13940
3.2 cSt
6.4 cSt
12 cSt
28 cSt
80 cSt
200 cSt
400 cSt
960 cSt
2000 cSt
5. Houillon
6. BS / IP SL viscometer for transparent liquids
19283
19284
19285
19286
19287
19288
19289
19290
19291
10 cSt
30 cSt
100 cSt
300 cSt
1000 cSt
3000 cSt
10000 cSt
30000 cSt
100000 cSt
6. BS / IP SL
7. S.I.L. viscometer for transparent liquids
19631
19632
19497
19498
19499
19500
19501
19502
3 cSt
10 cSt
30 cSt
100 cSt
300 cSt
1000 cSt
3000 cSt
10000 cSt
7. S.I.L.
8. BAUME VIGNERON viscometer for transparent liquids
14740
14741
14742
14743
14744
14745
14746
14747
14748
14749
14750
14751
14752
14753
14754
14755
14756
14757
14758
14759
14760
0.63 cSt
1 cSt
1,6 cSt
2.5 cSt
4 cSt
6.3 cSt
10 cSt
15 cSt
25 cSt
40 cSt
63 cSt
100 cSt
160 cSt
250 cSt
400 cSt
630 cSt
1000 cSt
1600 cSt
2500 cSt
4000 cSt
6300 cSt
8. BAUME VIGNERON
9. CANNON MANNING VACUUM viscometer for bitumen
18892
18893
18894
18895
18896
18897
18898
18899
18900
18901
18902
0.8 cSt
2.4 cSt
8 cSt
24 cSt
80 cSt
240 cSt
800 cSt
2400 cSt
8000 cSt
24000 cSt
80000 cSt
9. CANNON MANNING VACUUM
ALL ABOVE VISCOMETERS CAN BE SUPPLIED
WITHOUT CERTIFICATE ON SPECIAL REQUEST
CN06-2uk
(all previous editions obsolete)
23
VISCOMETER TUBES FOR AUTOMATIC VISCOMETER
10. CANNON UBBELOHDE viscometer for transparent liquids
without connection to washer
15253
15255
15256
15257
15259
15260
15263
15264
15266
0.003 (approx. constant)
0.005 (approx. constant)
0.01 (approx. constant)
0.03 (approx. constant)
0.1 (approx. constant)
0.3 (approx. constant)
1 (approx. constant)
3 (approx. constant)
10 (approx. constant)
10. CANNON UBBELOHDE
11. CANNON UBBELOHDE viscometer for transparent liquids
with connection to washer
22882
22883
22884
22885
22886
22887
22888
22889
22890
0.005 (approx. constant)
0.003 (approx. constant)
0.01 (approx. constant)
0.03 (approx. constant)
0.1 (approx. constant)
0.3 (approx. constant)
1 (approx. constant)
3 (approx. constant)
10 (approx. constant)
11. CANNON UBBELOHDE
ALL ABOVE VISCOMETERS CAN BE SUPPLIED
WITHOUT CERTIFICATE ON SPECIAL REQUEST
CN06-2uk
(all previous editions obsolete)
24
VISCOSITY STANDARDS (1 pint)
CN06-2uk
(all previous editions obsolete)
25
ASTM D 473
Sediment in Crude Oils and Fuel Oils by the
Extraction Method
SCOPE
This test method covers the determination of sediment in crude oils and
fuels oils by extraction with toluene.
OTHER STANDARDS
IP 53 - NFM 07010 - ISO 3735 - DIN 51789
REF. 941281
941281 - EXTRACTION APPARATUS
Extraction apparatus consisting of erlenmeyer extraction flask, 1000ml capacity, block-tin coil condenser, water cup and extraction thimble suspended
by means of a corrosion resistant wire.
ACCESSORY
28754
Hot plate SB 160
SPARE PARTS
10763
941284
941282
941614
10739
19012
Extraction thimble (alundum)
Extraction basket
Condenser
Heating element (600 W)
Water cup w ith glass hook
Extraction f lask (1 litre)
CN06-2uk
(all previous editions obsolete)
picture not mandatory
26
ASTM D 482
Ash from Petroleum Products
See other applications under ASTM D 874 - D 4530
SCOPE
This test method covers the determination of ash in the range 0.001-0.180
mass %, from distillate and residual fuels, gas turbine fuels, crude oils, lubricating oils, waxes, and other petroleum products, in which any ash-forming materials present are normally considered to be undesirable impurities
or contaminants.
OTHER STANDARD
IP 4
REF. 23963
Muffle furnace model L3/11, 3 liters capacity, maximum temperature
of 1100 °C.
NECESSARY ACCESSORIES (for D482)
10532
10687
10702
10770
27203
9411300
Porcelain dish,100 ml,f lat bottom (pack of 6 )
Stainless curved crucible tong (pack of 2)
Glass balls diam. 2mm (1 kg)
Porcelain plate f or below dessicator
Soda lime glass dessicator diam. 200 mm
Platinum crucible (100 ml)
NECESSARY ACCESSORIES (for D874)
10508
10509
10510
10515
10532
10687
10702
10770
27203
15377
15386
15387
15671
Porcelain crucible, 40 ml tall f orm (pack of 6 )
Porcelain crucible, 80 ml tall f orm (pack of 6 )
Porcelain crucible,120 ml tall f orm (pack of 6 )
Porcelain crucible, 80 ml low f orm (pack of 6 )
Porcelain dish,100 ml,f lat bottom (pack of 6 )
Stainless curved crucible tong (pack of 2)
Glass balls diam. 2mm (1 kg)
Porcelain plate f or below dessicator
Soda lime glass dessicator diam. 200 mm
Silica crucible (50 ml tall f orm)
Silica crucible (75 ml low f orm)
Silica crucible (130 ml low f orm)
Platinum crucible (50 ml)
23963 - MUFFLE FURNACE
230
V
6
A
50
Hz
20
Kg
w 380 mm
d 370 mm
h 420 mm
picture not mandatory
SPARE PARTS
23964
23965
Set of heating elements
Thermoc ouple K (160mm)
ASTM D 524
Ramsbottom Carbon Residue of Petroleum
Products
SCOPE
This test method covers the determination of the amount of carbon residue
left after evaporation and pyrolysis of an oil, and is intended to provide
some indication of relative coke-forming propensity.
OTHER STANDARDS
IP 14 - NFT 60117 - ISO 4262
REF. 941671
941671 - RAMSBOTTOM CARBON TESTER
This model with 5 wells and control bulb does not include test accessories.
NECESSARY ACCESSORIES
9419675
941673
19365
10 ml syringe w ith needie
Filling device f or glass coking bulb
Glass coking bulb
SPARE PARTS
9419675
941674
941675
941679
10 ml syringe w ith needie
Control bulb w ith thermocouple
Thermocouple assembly (f urnace + saf ety)
Heating element (1700 W)
CN06-2uk
(all previous editions obsolete)
230
V
16
A
50
Hz
75
Kg
w 425 mm
d 425 mm
h 505 mm
picture not mandatory
27
ASTM D 525
Oxidation Stability of Gasoline
(InductionPeriod Method)
See other applications under ASTM D 873
SCOPE
This test method covers the determination of the stability of gasoline in
finished form only, under accelerated oxidation conditions.
40925 - METALLIC BATH NPI 442 (4 places)
OTHER STANDARDS
IP 40 - NFM 07012 - ISO 7536 - DIN 51780
AUTOMATIC EQUIPMENT MODELS NPI 440 and 442
REF. 40925 (for D525 and D873)
4-unit automatic Potential gums & Induction period tester, model NPI 442,
including metallic bath, direct pressure measurement in the test vessel,
over-pressure safety by certified bursting disk and quick coupling, tracking
of pressure, pressure drop and break-point on printer or PC, supplied with
plotter but without filling accessory, test vessels, sample container, nor PC
software.
230
V
10
A
50
Hz
40
Kg
w 570 mm
d 630 mm
h 640 mm
on request
115V 60Hz
picture not mandatory
REF. 40900 (for D525, D873)
2-unit automatic Potential gums & Induction period tester, model NPI 440,
including liquid bath, direct pressure measurement in the test vessel,overpressure safety by certified bursting disk and quick coupling, tracking of
pressure, pressure drop and break-point on printer or PC, supplied with
plotter but without filling accessory, test vessels, sample container, nor PC
software.
REF. 40930
The oxygen filling and decompression valve adapter model NPC 210 is
designed for all type of potential gums and induction period test vessels.
The kit provides the operator with a high level of safety.
NECESSARY ACCESSORIES (for D525 and D873)
409031
40909
40911
40933
21688
513514
513513
Stainless steel vessel w ith burst disk
Filling and decompression (manual)
Stand f or 2 vessels
Gaskets viton f or cylinder (pack of 10)
Glass test container w ithout cover
Cover f or container
Glass test container w ith cover
40900 - LIQUID BATH NPI 440 (2 places)
230
V
10
A
50
Hz
40
Kg
w 570 mm
d 630 mm
h 640 mm
on request
115V 60Hz
picture not mandatory
40930 - OXYGEN FILLING CHAMBER NPC 210
SPARE PARTS
40390
40913
40916
40919
40933
40934
40935
Printer paper Seyko DPU 414 (roll)
Pt 100 probe f or liquid bath
Heating element f or liquid bath (1800 W)
Solid state relay f or heating element
Gaskets viton f or cylinder (pack of 10)
Pt 100 probe f or dry bath
Heating cartridge f or dry bath (4 x 200 W)
30
Kg
w 500 mm
d 365 mm
h 800 mm
picture not mandatory
MANUAL EQUIPMENT
REF. 941372
4-place water bath with glass condenser and digital temperature control.
NECESSARY ACCESSORIES
409031
Stainless steel vessel w ith burst disk
40909
Filling and dec ompres s ion (manual)
941362
941365
21688
513514
11509
513513
Recording pressure gauge (1 f or 2 vessels)
Charts f or recording gauge (pack of 100)
Glass test container w ithout cover
Cover f or container
A STM thermometer 22C
Glass test container w ith cover
SPARE PARTS
19007
9412209
9413621
Glass condenser
Heating element (1500 W)
Red Pen f or recorder (pack of 5)
9413622
Green Pen for recorder (pack of 5)
9417902
11509
Pt 100 probe (60x5 mm)
A STM thermometer 22C
941372 - LIQUID BATH (4 place)
230
V
16
A
50
Hz
60
Kg
w 720 mm
d 400 mm
h 650 mm
picture not mandatory
CN06-2uk
(all previous editions obsolete)
28
ASTM D 566
Dropping Point of Lubricating Grease
SCOPE
This test method covers the determination of the dropping point of lubricating grease.
OTHER STANDARDS
IP 132 - NFT 60102 - ISO 2176
QUOTATION ON REQUEST
ASTM D 611
Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon solvents
SCOPE
This test method covers the determination of the aniline point of petroleum
products and hydrocarbon solvents.
OTHER STANDARDS
IP 2 - NFM 07021 - ISO 2977 - DIN 51787
REF. 41100
41100 - ANILINE POINT NPA 410
Automatic Aniline Point Tester model NPA 410. Detection of clear to dark
sample by infrared detection.
NO HANDLING OF ANILINE.
ACCESSORIES
41104
41105
41106
2 ml vials to crimp (pack of 1000)
Crimp seal (pack of 500)
Hand crimper
REFERENCE FLUID (see page 76)
SPARE PARTS
41109
41117
41121
230
V
1.5
A
50
Hz
9
Kg
w 280 mm
d 330 mm
h 260 mm
on request
115V 60Hz
picture not mandatory
Thermocouple
Set of 2 f uses (2A )
Heating cartridge 100W
REF. 40500
Auto aniline point tester model, NAE 440 equipped with 2 independant
stations, heating system by metallic bath (+10/+150 °C), printer, automatic
detection of clear, colored and dark samples.
REFERENCE FLUID (see page 74)
SPARE PARTS
40390
Printer paper Seyko DPU 414 (roll)
41121
Heating c artridge 100W
CN06-2uk
(all previous editions obsolete)
40500 - ANILINE POINT NAE 440
230
V
1.5
A
50
Hz
30
Kg
w 520 mm
d 490 mm
h 540 mm
on request
115V 60Hz
picture not mandatory
29
ASTM D 613
Reference and Check Fuel Blending for
Octane and Cetane Measurement
See other applications under ASTM D 2699 - D 2700
SCOPE
NABLEND series of automatic blending units have been designed to automate the blending procedure for reference and check fuels used for octane
and cetane number measurement.
Due to the flexibility of the software the instrument can be used for other
hydrocarbon blending purposes too where the accuracy and the speed of
the blending procedure are critical.
The units are operable locally from the embendded Windows CE based
touch screen computer or can be remote controlled from any PC having an
internet browser installed over the local area network.
The intranet technology software allows complete remote management and
service over the internet or phone line.
The blending and calibration data being stored in an internal database, can
be accessed over the local area network.
52000 - AUTOMATIC BLENDING UNIT
REF. 52000
Model NABLEND 8875 automatic stand alone unit with 2 fluid channels, for
blending cetane reference fuels according ASTM D613 composed of two
blending components: nCetane, AMN or HMN, or U and T components.
REF. 52100
Model NABLEND 8873 automatic stand alone unit with 3 fluid channels, for
blending octane reference and check fuels according ASTM D2699 and
ASTM D2700 composed of three blending components: iso-octane, normal heptane and toluene.
REF. 52200
Model NABLEND 8877 automatic stand alone unit with 5 fluid channels, for
blending octane and cetane reference and check fuels according ASTM
D613, ASTM D2699 and ASTM D2700 composed of three blending components: iso-octane, normal heptane and toluene for octane and two blending components: nCetane, AMN or HMN, or U and T components for cetane.
REF. 52300
Model NABLEND 8879 automatic stand alone unit with 6 fluid channels, for
blending octane and cetane reference and check fuels according ASTM
D613, ASTM D2699 and ASTM D2700 composed of four blending components: iso-octane, normal heptane, 80/20 blend and toluene for octane and
two blending components: nCetane, AMN or HMN, or U and T components
for cetane.
OPTIONAL ACCESSORY
53000
Explosion-proof drum pump
MAIN CONSUMABLE
52001
Bottle, solvent resistant w ith cock (1l)
90-264
0.8
47-440
270
w 610
d 820
h 1650
V
A
Hz
Kg
mm
mm
mm
picture not mandatory
SPARE PARTS
52002
52003
52004
52005
Dosing pump
Printer paper (roll)
Fuel f ilter
Solenoid valve
52006
Injec tion head O-ring
CN06-2uk
(all previous editions obsolete)
30
ASTM D 664
Acid Number of Petroleum Products by
Potentiometric Titration
SCOPE
This test method covers procedures for the determination of acidic constituents in petroleum products and lubricants soluble or nearly soluble in
mixture of toluene and propan-2-ol.
OTHER STANDARDS
IP 177 - ISO 6619
REF. 941708
941708 - ACID NUMBER TESTER
Neutralisation number apparatus by potentiometric titration, single unit, complete with pH test kit.
SPARE PARTS
941709
9417082
9417083
19027
12438
PH test kit
Glass electrode (Beck. 39321)
Calomel electrode (Beck. 39420)
Burette (10ml in 0,05 ml)
250 ml beaker
230
V
0.3
A
50
Hz
5
Kg
w 500 mm
d 340 mm
h 770 mm
picture not mandatory
ASTM D 665
Rust-Preventing Characteristics of Inhibited
Mineral Oil in Presence of Water
SCOPE
This test method is used to evaluate the ability of inhibited mineral oils,
particularly steam-turbine oils, to aid in preventing the rusting of ferrous
parts should water become mixed with the oil. This test method is also
used for testing other oils, such as hydraulic oils and circulating oils.
OTHER STANDARDS
IP 135 - NFT 60151 - ISO 7120 - DIN 51585
REF. 9416306
9416306 - RUST TESTER
This improved 6 places unit with digital tachometer includes beakers, covers, stainless steel stirrers, test rods with plastic holders and 9C thermometers. Polishing machine is not included.
ACCESSORY
941636
Polishing apparatus w ith electric motor
SPARE PARTS
941631
941632
941633
9416309
400 ml beaker
Transparent plastic cover
Stainless steel stirrer
Heating element (1000 W)
9416341
9416342
9417904
11496
Test specimen
Plastic holder
Pt 100 probe (160x5 mm)
A STM thermometer 9C
230
V
16
A
50
Hz
25
Kg
w 770 mm
d 250 mm
h 530 mm
on request
115V 60Hz
picture not mandatory
941636 - POLISHING MACHINE
230
V
2.5
A
50
Hz
5
Kg
w 320 mm
d 320 mm
h 200 mm
picture not mandatory
CN06-2uk
(all previous editions obsolete)
31
ASTM D 721
Oil Content of Petroleum Waxes
See other application under ASTM D 3235
SCOPE
This test method covers the determination of oil in petroleum waxes having
a congealing point of 30°C or higher as determined in accordance with test
method D 938, and containing not more than 15% of oil.
OTHER STANDARDS
IP 158 - NFT 60120 - ISO 2908 - DIN 51571
941795 - OIL CONTENT TESTER
REF. 941795
Complete apparatus delivered with cooling bath, 3 filter stick, air pressure
regulator, evaporation assembly, 4 weighing bottles and thermometer.
230
V
0.3
A
50
Hz
15
Kg
w 600 mm
d 300 mm
h 450 mm
SPARE PARTS
23240
517565
517564
9417902
Weighing bottle (15 ml)
Filter stick B24
Cooling sample tube
Pt 100 probe (60x5 mm)
picture not mandatory
ASTM D 808
Chlorine in New and Used Petroleum
Products (Bomb Method)
See instrument under ASTM D 240
SCOPE
This test method covers the determination of chlorine in lubricating oils and
greases containing additives, and in additive concentrates.
CN06-2uk
(all previous editions obsolete)
32
ASTM D 850
Distillation of Industrial Aromatic
Hydrocarbons
See instrument under ASTM D 86
SCOPE
This test method covers the distillation of industrial aromatic hydrocarbons
ASTM D 873
Oxidation Stability of Aviation Fuels
(Potential Residue Method)
See instruments under ASTM D 525
SCOPE
This test method covers the determination of the tendency of aviation reciprocating, turbine, and jet engine fuels to form gum and deposits under accelerated aging conditions.
OTHER STANDARDS
IP 138 - NFM 07013 - DIN 51799
ASTM D 874
Sulfated Ash from Lubricating Oils and
Additives
See instrument under ASTM D 482
SCOPE
This test method covers the determination of the sulfated ash from unused
lubricating oils containing additives and from additives concentrates used in
compounding.
OTHER STANDARDS
IP 163 - NFT 60143 - ISO 3987 - DIN 51575
ASTM D 877
Dielectric Breakdown Voltage of Insulating
Fluids
SCOPE
This test method covers a referee and a routine procedure for determining
the dielectric breakdown voltage of insulating liquids.
OTHER STANDARDS
IP 295 - NFC 27221
REF. 23797
Complete Tester, model OTS60AF/2, for Dielectric Breakdown Voltage,
delivered with oil test vessel fitted with spherical electrodes and oil test set
preparation kit comprising stirrers, mushroom and cylindrical electrodes,
electrode spacing gauge and protective cover.
27196 - PORTABLE MEGGER
12 V rechargeable
REF. 27196
Portable tester, model OTS60PB, for routine analysis, delivered with 4 oil
vessels, 1 pair of spherical, mushroom and cylindrical electrodes, spacing
gauge and protective carrying case.
SPARE PARTS
23798
23799
Test container + electrodes f or D877
Test container + electrodes f or NFC 27221
CN06-2uk
(all previous editions obsolete)
19
Kg
w 259 mm
d 247 mm
h 373 mm
picture not mandatory
33
ASTM D 892
Foaming Characteristics of Lubricating Oils
941643 - FOAMING TEST BATH
SCOPE
This test method covers the determination of the foaming characteristics of
lubricating oils at 24°C and 93.5°C.
OTHER STANDARDS
IP 146 - NFT 60129 - ISO 6247
REF. 941643
Twin test units for both 24 and 93.5 °C. Delivered complete with certified
diffuser stone,glassware, flowmeters and thermometers.
230
V
16
A
50
Hz
36
Kg
w 680 mm
d 340 mm
h 770 mm
REF. 941640
picture not mandatory
Single test unit for both 24 and 93.5 °C. Delivered complete with certified
diffuser stone,glassware, flowmeters and thermometers.
9416431 - AUTOMATIC SEQUENCER
REF. 9416431
Automatic time sequencer to monitor soaking, blowing and settling periods
for 4 samples. It helps the operator to limit his presence nearby the instrument using audible and visual alarm.
ACCESSORIES
941644
23203
9416412
9416433
Wet Test Gas Meter (type 00)
Cryostat TLC 30 - 5 liters (-30/+60°C ±.1)
Graduated cylinder (1000 ml) w ith ballast
A ir compressor
230
V
2
A
50
Hz
5
Kg
w 250 mm
d 320 mm
h 150 mm
SPARE PARTS
24795
941435
19371
Dif f user stone calibrated (w ith certif icate)
Heating element (2000 W)
Graduated cylinder (1000 ml)
24803
Stainless steel diffuser
9411302
9417904
11499
Borosilicate glass jar(300 x 450 mm)
Pt 100 probe (160x5 mm)
A STM thermometer 12C
picture not mandatory
99644 - WET TEST GAS METER
5
Kg
w 260 mm
d 260 mm
h 460 mm
picture not mandatory
ASTM D 892 and D 6082
Foaming caracteristics sequences 1, 2, 3 and 4
REF. 9416432
Twin test unit for sequence 1, 2, 3 at 24 and 93.5 °C and sequence 4at
150°C. Ready to use and delivered with two test cylinders, calibrated
flowmeters and stainless steel diffusers.
9416432 - FOAMING TESTER (150 °C)
OPTIONAL ACCESSORIES
9416431
9416434
A utomatic time sequencer
Oil polyalphaolef in f or bath (can of 25 l)
SPARE PARTS
19371
941435
24803
9417905
Graduated cylinder (1000 ml)
Heating element (2000 W)
Stainless steel dif f user
Pt 100 probe (250x5 mm)
CN06-2uk
(all previous editions obsolete)
230
V
10
A
50
Hz
32
Kg
w 350 mm
d 350 mm
h 760 mm
picture not mandatory
34
ASTM D 937
Cone Penetration of Petrolatum
See instruments under ASTM D 5
SCOPE
This test method covers measuring with a penetrometer the penetration of
petrolatum as an empirical measure of consistency.
OTHER STANDARDS
IP 179 - NFT 60119 - DIN 51579
ASTM D 941
Density and Relative Density of Liquids by
Lipkin Bicapillary Pycnometer
See instrument under ASTM D 287
SCOPE
This practice covers the laboratory determination, using a glass hydrometer, of the density, relative density, or API gravity of crude petroleum, petroleum products, or mixtures of petroleum and non petroleum products
normally handled as liquids, and having a Reid vapor pressure of 26 lb or
less.
OTHER STANDARDS
IP 160 - ISO 3675
ASTM D 942
Oxidation Stability of Lubricating Greases
(Oxygen Vessel Method)
SCOPE
This test method determines resistance of lubricating greases to oxidation
when stored statically in an oxygen atmosphere in a sealed system at an
elevated temperature under conditions of test.
OTHER STANDARD
IP 142
REF. 941769
Constant temperature oil bath, double walled,for 2 Norma-Hoffman Test
vessels
REF. 941770
Constant temperature oil bath, double walled,for 4 Norma-Hoffman Test
vessels
941770 - OIL BATH (4 places)
NECESSARY ACCESSORIES
941766
941767
941370
941761
941762
517215
941764
941765
9417611
11509
Pressure gauge (0-160 psi)
Recording pressure gauge (2-pen) w ith tubings
Flexible polyethylene tubing w ith quick coupling
Complete oxidation vessel
Holder f or 5 dishes
Glass dish (pack of 10)
Spare burst disc
A ccessory f or closing vessel
Complete oxidation vessel w ith burst disc
A STM thermometer 22C
230
V
10
A
50
Hz
45
Kg
w 600 mm
d 400 mm
h 450 mm
picture not mandatory
SPARE PARTS
941365
941762
517215
9413621
9413622
9417641
9417709
9417905
11509
Charts f or recording gauge (pack of 100)
Holder f or 5 dishes
Glass dish (pack of 10)
Red Pen f or recorder (pack of 5)
Green Pen f or recorder (pack of 5)
Lead gasket f or oxidation vessel
Heating element (1000 W)
Pt 100 probe (250x5 mm)
A STM thermometer 22C
CN06-2uk
(all previous editions obsolete)
35
ASTM D 943
Oxidation Characteristics of Inhibited
Mineral Oils
See other application under ASTM D 2274 - D 2893 - D 4310
SCOPE
This test method was developed for, and is used to evaluate the oxidation
stability of inhibited steam-turbine oils in the presence of oxygen, water, and
copper and iron metals at an elevated temperature.
OTHER STANDARDS
IP 157 - NFT 60150 - ISO 4263 - DIN 51587
REF. 9416260
Oxidation Test apparatus, 8 units, with digital temperature display, opaque
magnetic screen, one bath thermometer.
This apparatus is delivered whithout flowmeter.
STANDARD KITS AT CHOICE (REQUIRED)
KIT FOR ASTM D 943 - 8 test positions
9416251
21696
Flow meter f or 3 l/h air (D943)
Oxidation cell D943/D2893 (8 cells requested)
KIT FOR ASTM D 2274 & D 4310 - 8 test positions
9416252
Flow meter f or 3 l/h oxygen (D2274 / D4310)
21697
Oxidation cell D 2274/D 4310 (8 cells requested)
9416260 - OXIDATION TESTER
230
V
16
A
50
Hz
40
Kg
w 610 mm
d 450 mm
h 1100 mm
picture not mandatory
KIT FOR ASTM D 2893 - 8 test positions
9416253
21696
Flow meter f or 10 l/h air (D2893)
Oxidation cell D943/D2893 (8 cells requested)
OPTIONAL ACCESSORIES
21011
516596
516597
941628
9416231
9416232
9416233
Catalyst iron-copper coil (ready to use)
Reel of iron w ire catalyst (1 kg)
Reel of copper w ire catalyst (20 kg)
Winding f ixture f or w ire catalyst
Thermometer bracket
Syringe w ith sampling tube
Sampling tube holder
SPARE PARTS - GLASSWARE
19347
19348
19349
Test container
Mushroom c ondenser (D943)
Oxygen delivery tube
19351
Mushroom condenser (D2274 / D4310)
SPARE PARTS - BATH
9417905
11522
9416239
Pt 100 probe (250x5 mm)
A STM thermometer 40C
Heating element (1000 W)
Apparatus for Filterable Insolubles (ASTM D2274 & D4310)
27530
Filter 0.8 µm/diam. 47mm (D4310)
28695
30293
Vacuum pump 34 l/min. (D4310)
Filter assembly (D4310)
CN06-2uk
(all previous editions obsolete)
36
ASTM D 972
Evaporation Loss of Lubricating Greases
and Oils
SCOPE
This test method covers the determination of the loss in mass by evaporation of lubricating greases and oils for applications where evaporation loss
is a factor.
REF. 941771
Evaporation cell with grease sample cup, equipped with flowmeter and
needle control valve.
REF. 941772
Evaporation cell with oil sample cup, equipped with flowmeter and needle
control valve.
OPTIONAL
941773
Oil bath f or evaporation cell
SPARE PARTS
9417741
9417742
11509
11536
Grease sample cup
Oil sample cup
A STM thermometer 22C
A STM thermometer 67C
ASTM D 1078
Distillation of Volatile Organic Liquids
See instrument under ASTM D 86
SCOPE
This test method specifies a procedure for the laboratory distillation of organic liquids boiling between 30 and 300 °C which are chemically stable
during the distillation process.
OTHER STANDARD
IP 195
CN06-2uk
(all previous editions obsolete)
37
ASTM D 1142
Water Vapor Content of Gaseous Fuels by
Measurement of Dew-Point Temperature
SCOPE
This test method covers the determination of the water vapor content of
gaseous fuels by measurement of the dew-point temperature and the calculation therefrom of the water vapor content.
REF. 941975
941975 - WATER VAPOR TESTER
Complete Tester 3 to 15 psi with pressure gauge and thermometer.
REF. 9419751
Complete Tester 0 to 350 psi with pressure gauge and thermometer.
SPARE PARTS
941977
9419781
9419782
11515
Stainless steel mirror
Bourdon manometer 3 to 15 psi
Bourdon manometer 0 to 350 psi
A STM thermometer 33C
picture not mandatory
ASTM D 1160
Distillation of Petroleum Products at
Reduced Pressure
SCOPE
This test method covers the determination, at reduced pressures, of the
range of boiling points for petroleum products that can be partially or completely vaporized at a maximum liquid temperature of 400°C.
OTHER STANDARDS
ISO 6616
REF. 9411280
Half-automated instrument built on a dedicated frame including water circulator, vacuum pump, computerized regulation of temperature and pressure (1 to 50 mmHg), printing dump of distillation report according to standard and full glassware.
OPTIONAL ACCESSORIES
941597
23478
9411305
Dry ice machine
Quartz f lask w ith thermow ell (500 ml)
Distillation column f or quartz f lask
SPARE PARTS
21694
41604
41606
41609
41611
41612
41613
Heating controller
Set of glassw are
Heating block and mantle (1000 W)
500 ml glass f lask w ith thermow ell
200 ml cylinder f or vacuum distillation
Distillation column and c ondenser
Dual cold trap
9411304
V ac uum / Pt100 adapter (top of c olumn)
9411301
9411311
9411306
9417444
19011
9417906
Distillation column "O" ring
Seal gasket f or Pt100
Set of vacuum pipes
Gloves (pair)
Light recovery cylinder (12 ml)
Pt 100 probe GDR (170x2 mm)
11495
ASTM thermometer 8C
CN06-2uk
(all previous editions obsolete)
9411280 - VACUUM DISTILLATION UNIT
230
16
50
105
w 1000
d 600
h 800
V
A
Hz
Kg
mm
mm
mm
picture not mandatory
38
ASTM D 1177
Freezing Point of Antifreeze Products
SCOPE
This test method covers the determination of the freezing point of engine
antifreeze products.
OTHER STANDARD
NFT 78102
REF. 9411520
Freezing point apparatus of engine antifreeze solutions complete with
thermometers.
SPARE PARTS
23239
9411522
15351
15352
Dew ar f reezing tube (200 ml)
Dew ar cooling bath
A STM thermometer 75F
A STM thermometer 76F
9411520 - FREEZING POINT APPARATUS
230
V
0.3
A
50
Hz
6
Kg
w 200 mm
d 300 mm
h 600 mm
picture not mandatory
ASTM D 1217
Density and Relative Density of Liquids by
Bingham Pycnometer
See instrument under ASTM D 287
SCOPE
This test method covers the measurement of the density of pure hydrocarbons or petroleum distillates boiling between 90 and 110°C that can be
handled in a normal fashion as a liquid at the specified test temperatures of
20 and 25°C.
ASTM D 1263
Leakage Tendencies of Automotive Wheel
Bearing Greases
SCOPE
This test method covers the evaluation of the leakage tendencies of wheel
bearing greases when tested under prescribed laboratory conditions.
QUOTATION ON REQUEST
CN06-2uk
(all previous editions obsolete)
39
ASTM D 1264
Determining the Water Washout
Characteristics of Lubricating Greases
SCOPE
This test method covers the evaluation of the resistance of a lubricating
grease to washout by water from a bearing, when tested at 38 and 79°C
under the prescribed laboratory conditions.
QUOTATION ON REQUEST
ASTM D 1265
Sampling Liquefied Petroleum (LP) Gases
(Manual Method)
SCOPE
This practice covers the procedures for obtaining representative samples
of liquefied petroleum gases such as propane, butane, or mixture thereof,
in containers other than those used in laboratory testing apparatus.
OTHER STANDARDS
NFM 41101 - ISO 4257 - DIN 51610
REF. 9414541
Whitey stainless steel sampling vessel (1gallon) complete assembly.
SAMPLING OF LPG
REF. 9412251
Whitey stainless steel sampling vessel (2250cc) complete assembly.
REF. 9411001
Whitey stainless steel sampling vessel (1000cc) complete assembly.
REF. 941501
Whitey stainless steel sampling vessel (500 cc) complete assembly.
SPARE PARTS
9414546 Stainless steel sampling vessel (1gallon)
9412250
9411000
941500
941031
941034
941046
941068
941400
941440
941464
9411613
9411819
9412213
picture not mandatory
Stainless steel sampling vessel (2250 cc)
Stainless steel sampling vessel (1000 cc)
Stainless steel sampling vessel (500 cc)
V alve D w ith tube 031 f or ref . 9411001
V alve D w ith tube 034 f or ref . 941501
V alve D w ith tube 046 f or ref . 9412251
V alve D w ith tube 068 f or ref . 9414541
Quick coupling (QQ-QF4-B-400)
Flexible tubing 1m (SS-TH4TA 4PF4-40)
Inlet valve C f or vessel (SS-16DKM4-F4)
Quick coupling male (SS-QF4-S-4PM)
Connection M/F TE (SS-4-ST)
V alve (SS-1 V M4)
CN06-2uk
(all previous editions obsolete)
40
ASTM D 1266
Sulfur in Petroleum Products
(Lamp Method)
See other applications under ASTM D 2784
SCOPE
This test method covers the determination of total sulfur in liquid petroleum
products in concentrations from 0.01 to 0.4 mass %.
OTHER STANDARDS
IP 107 - NFM07031- ISO 2192 - DIN 51771
REF. 941454
Sulfur determination apparatus in liquid petroleum products, complete
6-unit assembly, by burning in a controlled atmosphere, suitable Manifold
System consisting of a vacuum manifold with regulating device and a dual
manifold supplying gas mixture of approx. 70% carbon dioxide (C02) and
30% oxygen (O2 ) at regulated pressures.
SPARE PARTS
9414560
19334
19332
19333
19330
19331
19013
19014
9414568
9414570
19336
19335
Ball of 2 oz cotton w icks, 4 strands
25 ml f lask (non aromatic products)
Burner f or non-aromatic samples
Spray trap
A bsorber
Chimney
Scrubber
Regulator tube
Pressure or vacuum trap
Level f lask
25 ml f lask (aromatic products)
Burner f or aromatic samples
CN06-2uk
(all previous editions obsolete)
941454 -
56
w 1150
d 600
h 800
SULFUR TESTER (lamp method)
Kg
mm
mm
mm
picture not mandatory
41
ASTM D 1267
Gauge Vapor Pressure of Liquefied
Petroleum Gases (LP-Gas Method)
SCOPE
This test method covers the determination of the gage vapor pressures of
liquefied petroleum gas products at temperatures of 37.8°C up to 70°C.
OTHER STANDARDS
IP 161 - NFM 41010 - ISO 4256 - DIN 51616
REF. 941432
Electronic constant thermostatic bath, 3 vessels capacity, with thermometer and digital display. Equipped with adjustable stirring device, low water
cut-off, cooling coil for external cryostat and drain cock.
LPG TEST VESSEL (for D1267)
941921
LPG test vessel
LPG TEST VESSEL (for IP 161)
9419221
9419222
9419231
9419232
Test
Test
Test
Test
vessel
vessel
vessel
vessel
up to 300 psi (20% capacity)
above 300 psi (20% capacity)
up to 300 psi (33% capacity)
above 300 psi (33% capacity)
941432 - THERMOSTATIC BATH (3 place)
230
V
16
A
50
Hz
30
Kg
w 470 mm
d 470 mm
h 860 mm
on request
115V 60Hz
picture not mandatory
OPTIONAL ACCESSORY
941920
Saf ety burst disk capsule (add on vessel price)
VAPOR PRESSURE GAUGES (psi and kPa)
941918
941424
941925
Metallic manometer 0 to 500 psi/3400 kPa
Metallic manometer 0 to 100 psi/650 kPa
Metallic manometer 0 to 250 psi/1600 kPa
941921 - LPG TEST VESSEL
SPARE PARTS
941435
9419201
9417905
9419211
9419212
9419213
9419237
11505
Heating element (2000 W)
Spare burst disc
Pt 100 probe (250x5 mm)
A ir chamber w ith valve f or 941921
Gas chamber w ith 2 valves f or 941921
Gasket f or LPG vessel D1267 (pack of 24)
Seal "O" ring f or IP161 test vessel
A STM thermometer 18C
ASTM D 1298
picture not mandatory
API Gravity of Crude Petroleum and Liquid
Petroleum Products by Hydrometer
See instrument under ASTM D 287
SCOPE
This practice covers the laboratory determination, using a glass hydrometer, of the density, relative density, or API gravity of crude petroleum, petroleum products, or mixtures of petroleum and nonpetroleum products
normally handled as liquids, and having a Reid vapor pressure of 26 lb or
less.
OTHER STANDARDS
IP 160 - NFT 60101 - ISO 3675 - DIN 51757
CN06-2uk
(all previous editions obsolete)
42
ASTM D 1319
Hydrocarbon Types in Liquid Petroleum
Products by Fluorescent Indicator Adsorption
SCOPE
This test method is for determining hydrocarbon types over the concentration ranges from 5 to 99 volume % aromatics, 0.3 to 55 volume % olefins,
and 1 to 95 volume % saturates in petroleum fractions that distill below
315°C.
OTHER STANDARDS
IP 156 - NFM 07024 - ISO 3837 - DIN 51791
REF. 941600
New designed adsorption apparatus assembly, 4 test, with pressure gauges,
needles valves, UV lighting, vibrator and basic glassware whithout column.
941600 - ADSORPTION APPARATUS
NECESSARY ACCESSORIES
19761
76239
19325
21700
19023
19585
19586
9415068
Silica gel 100 to 200 mesh (2 kg)
Certif ied silica gel w ith colored indicator (40 gr)
True Bore adsorption column
Standard adsorption column (upper part)
Standard w all tubing (low er part)
Hypodermic syringe 1ml
Hypodermic needle 102 mm (set of 5)
Hypodermic cleaning tube (2 m)
SPARE PARTS
11089
11091
9415057
19022
19582
9415059
Clamp f or low er joint
Clamp f or upper joint
Tube UV (40 W)
Spherical connector f or air input (S28/12)
Outlet f or true bore column (S12/2)
Electrical vibrator
230
1
50
35
w 700
d 160
h 1900
V
A
Hz
Kg
mm
mm
mm
picture not mandatory
ASTM D 1321
Needle Penetration of Petroleum Waxes
See instruments under ASTM D 5
SCOPE
This test method covers the empirical estimation of the consistency of waxes
derived from petroleum by measurement of the extent of penetration of a
standard needle.
OTHER STANDARDS
NFT 60123 - ISO 3992 - DIN 51579
CN06-2uk
(all previous editions obsolete)
43
ASTM D 1322
Smoke Point of Kerosine and Aviation
Turbine fuel
SCOPE
This test method covers a procedure for determination of the smoke point
of kerosine and aviation turbine fuel.
OTHER STANDARDS
IP 57 - NFM 07028 - ISO 3014 - DIN 51406
941680 - SMOKE POINT APPARATUS
REF. 941680
Smoke point apparatus, complete, delivered with one interchangeable oil
container
SPARE PARTS
9416801
9416802
4
Kg
w 200 mm
d 200 mm
h 400 mm
Candle (oil container)
Wick (pack of 12)
picture not mandatory
ASTM D 1401
Water Separability of Petroleum Oils and
Synthetic Fluids
SCOPE
This test method covers measurement of the ability of petroleum oils or
synthetic fluids to separate from water.
941550 - AUTO DEMULSIBILITY TESTER
OTHER STANDARDS
NFT 60125 - ISO 6614
REF. 941550
Automated Demulsibility Tester, CE tested and approved, controlled by
exclusive software with image processing, with a highest degree of
repeatability and reproducibility because layers detections are no longer
evaluated by the human eyes but by using a CCD-Camera which takes
pictures of every sample tube during testing
SPARE PARTS
11470
941551
9415450
9415459
Glass graduated cylinder (100 ml)
Translucent plate f or bath bottom
Stirring paddle
Heating element (1000 W)
9417904
Pt 100 probe (160x5 mm)
REF. 941545
Semi-automatic demulsibility tester microprocessored controlled , three
test unit, electronic temperature control between 20 and 95°C ± 0.1°C,
stirring speed and time control with digital parameters display, moving steel
shaft with stirring motor, paddle and inside illumination.
SPARE PARTS
11470
9415450
9417901
9415459
11489
230
V
16
A
50
Hz
50
Kg
w 560 mm
d 655 mm
h 1135 mm
on request
115V 60Hz
picture not mandatory
941545 - DEMULSIBILITY TESTER
230
V
10
A
50
Hz
43
Kg
w 530 mm
d 380 mm
h 900 mm
on request
115V 60Hz
picture not mandatory
Glass graduated cylinder (100 ml)
Stirring paddle
Pt 100 probe (150x6 mm)
Heating element (1000 W)
A STM thermometer 1C
CN06-2uk
(all previous editions obsolete)
44
ASTM D 1403
Cone Penetration of Lubricating Grease
Using 1/4 and 1/2 Scale Cone Equipment
See instrument under ASTM D 5
SCOPE
This test method covers two procedures for measuring the consistency of
small samples of lubricating greases by penetration of a ¼ or ½ scale cone.
OTHER STANDARDS
IP 310 - NFT 60140 - ISO 6298
ASTM D 1478
Low-Temperature Torque of Ball
Bearing Grease
SCOPE
This test method covers the determination of the extent to which a grease
retards the rotation of a slow-speed ball bearing by measuring starting and
running torques at low temperatures (below -20°C).
QUOTATION ON REQUEST
ASTM D 1480
Density and Relative Density of Viscous
Materials by Bingham Pycnometer
See instrument under ASTM D 287
SCOPE
This test method describes two procedures for the measurement of the
density of materials which are fluid at the desired test temperature.
CN06-2uk
(all previous editions obsolete)
45
ASTM D 1500
ASTM Color of Petroleum Products
(ASTM Color Scale)
SCOPE
This test method covers the visual determination of the color of a wide
variety of petroleum products such as lubricating oils, heating oils, diesel
fuel oils, and petroleum waxes.
OTHER STANDARDS
IP 196 - NFT 60104 - ISO 2049 - DIN 51578
REF. 24415
Manual colorimeter model AF650 with a 16 filters colorimetric scale from
0.5 to 8.0 units. It is a 3-field instrument for visually determining the ASTM
colour of samples by direct comparison with coloured glass standards. The
instrument is delivered with 3 glass sample jars and a calibration certificate
for the filters.
SPARE PARTS
19353
Glass sample tube
22279
Halogen lamp 12V / 20W
24415 - COLORIMETER AF650
115/230 V
0.3
A
50
Hz
5.5
Kg
w 255 mm
d 250 mm
h 170 mm
picture not mandatory
AUTOMATIC APPARATUS
REF. 29056
ON REQUEST
The Lovibond PFX 190 is an easy to use, automatic instrument requiring
no special skills to operate. It is supplied complete with Windows
software, accessories and spares, optical glass cells for the colour scales
included. Additional scales can be added to standard instruments on
request.
REF. 29006
ON REQUEST
The Lovibond PFX 880/P is an easy to use, automatic instrument, which
eliminates time-consuming procedures of visual methods. It is a
spectrophotometer for objective colour analysis of petroleum fuels, oils,
waxes and petrochemicals according to the Saybolt and ASTM Colour
scales
ASTM D 1552
Sulfur in Petroleum Products
(High-Temperature Method)
SCOPE
This test method covers three procedures for the determination of total
sulfur in petroleum products including lubricating oils containing additives,
and in additive concentrates.
OTHER STANDARD
NFM 07025
REF. 941450
Equipment including electric tube furnace with microprocessored digital
setting and reading, gas washing bottles, calibrated flowmeter, porcelain
combustion tube, combustion boats, boat pusher, bent tube, absorber,
burettes with support and clamps.
SPARE PARTS
941472
9414012
9414024
9414062
9414501
9414003
19330
19015
Burette (25 ml in 0.1ml)
Boat pusher
Combustion boat (alundum)
Combustion tube
Heating element f or f urnace
Oxygen drying train (3 f lask)
A bsorber
Right angle connector w ith standard joint
CN06-2uk
(all previous editions obsolete)
941450 - HIGH TEMPERATURE SULFUR TESTER
230
16
50
17
w 1200
d 450
h 800
V
A
Hz
Kg
mm
mm
mm
picture not mandatory
46
ASTM D 1657
Density or Relative Density of Light Hydrocarbons by Pressure Thermohydrometer
SCOPE
This test method covers the determination of the relative density or density
of light hydrocarbons including liquefied petroleum gases (LPG).
OTHER STANDARDS
IP 235 - NFM 41008 - ISO 3993
REF. 941911
Complete apparatus, mounted on a heavy base and suitable for immersion
in a constant temperature water bath.
REF. 9419110
Complete apparatus with burst disk, mounted on a heavy base and suitable
for immersion in a constant temperature water bath.
NECESSARY ACCESSORIES
941432
Constant temperature w ater bath (3 test)
23448
23449
9419124
Thermodensimeter (0.500 à 0.550 - 30°C)
Thermodensimeter (0.550 à 0.600 - 30°C)
Thermometer ISO 653
230
V
16
A
50
Hz
30
Kg
w 470 mm
d 470 mm
h 860 mm
on request
115V 60Hz
(3 place)
picture not mandatory
941911 - TEST VESSEL
OPTIONAL ACCESSORY
23204
941432 - THERMOSTATIC BATH
Cryostat TLC 40 - 11 liters (-45/+20°C ±.05)
SPARE PARTS
941435
9419121
9419132
Heating element (2000 W)
Thermo-hydrometer (0.500 to 0.650 in °F)
Lucite transparent cylinder
9417905
Pt 100 probe (250x5 mm)
9419133
11499
Neoprene gasket
A STM thermometer 12C
picture not mandatory
ASTM D 1665
Engler Viscometer for Bitumen
SCOPE
This test method covers the determination of the relative density or density
of light hydrocarbons including liquefied petroleum gases (LPG).
REF. 27235
1 -Place Engler viscometer without accessories
electric heating
digital display of temperature
temperature from room up to + 99,9°C
polished brass test cup with stainless steel efflux tube
waterbath motor stirrer 2800 rpm
safety thermostate
cooling coil
NECESSARY ACCESSORIES
521155
Engler f lask 50 ml
27253
Engler flask 100 + 100 ml
27254
27251
27252
Engler f lask 200 + 40 ml
Engler thermometer w ith ring +10/+55°C in 0.5°C
Engler thermometer w ith ring +10/+110°C in 1°C
CN06-2uk
(all previous editions obsolete)
27235 - ENGLER VISCOMETER
230
V
2
A
50
Hz
8
Kg
w 330 mm
d 270 mm
h 540 mm
picture not mandatory
47
ASTM D 1742
Oil Separation from Lubricating Grease
during Storage
SCOPE
This test method covers the determination of the tendency of a lubricating
grease to separate oil during storage in both normally filled and partially
filled containers.
REF. 941778
941778 - OIL SEPARATION FROM GREASE
6-test unit apparatus, complete, including air-pressure reducing valve and
regulator, constant temperature oven, bleeding cups with cover and sieve
strainers, with thermometer.
SPARE PARTS
9417781
12434
200 mesh stainless steel sieve (type A )
Beaker (20 ml)
9418779
11492
Heating element (500 W)
A STM thermometer 5C
230
V
10
A
50
Hz
50
Kg
w 700 mm
d 650 mm
h 950 mm
picture not mandatory
ASTM D 1748
Rust Protection by Metal Preservatives in the
Humidity Cabinet
SCOPE
This test method is used for evaluating the rust-preventive properties of
metal preservatives under conditions of high humidity.
QUOTATION ON REQUEST
CN06-2uk
(all previous editions obsolete)
48
ASTM D 1754
Effects of Heat and Air on Asphaltic
Materials (Thin-Film oven Test)
SCOPE
This test method covers the determination of the effects of heat and air on
a film of semisolid asphaltic materials.
OTHER STANDARD
NF EN 12607-2
REF. 941876
Strictly conform to ASTM requirements, this is a double wall illuminated
oven with glass window, 4 place revolving shelf, 4 aluminium containers
and thermometer.
941876 - THIN FILM OVEN
ACCESSORY
9418761
A luminium sample container 140x10 mm
SPARE PARTS
9418762
11500
Bulb 230V /15W
A STM thermometer 13C
230
V
16
A
50
Hz
60
Kg
w 670 mm
d 600 mm
h 700 mm
picture not mandatory
ASTM D 1796
Water and Sediment in Fuel Oils by the
Centrifuge Method (Laboratory Procedure)
See instrument under ASTM D 91
SCOPE
This test method covers the laboratory test for determination of water and
sediment in fuel oils by using the centrifuge method in the range from 0 to
30 % volume.
OTHER STANDARDS
NFM 07020 - ISO 3734 - DIN 51793
ASTM D 1831
Roll Stability of Lubricating Grease
SCOPE
This test method covers determination of the changes in the consistency,
as measured by cone penetration, of lubricating greases when worked in
the roll stability test apparatus.
REF. 941744
941744 - ROLL STABILITY TESTER
Specially designed twin-unit for long runs at high temperature up to 150 °C.
Delivered with 2 rolls/cylinders, tools and gloves.
ACCESSORIES
9417441
9417442
Lubricating grease pump f or bearing (500g)
Roller gasket
SPARE PARTS
9417443
9417444
9417445
9417834
Stopper 50/56 x 51 mm
Gloves (pair)
Bearing
Pt 100 probe (60x3.15 mm)
CN06-2uk
(all previous editions obsolete)
230
V
10
A
50
Hz
75
Kg
w 600 mm
d 570 mm
h 520 mm
on request
115V 60Hz
picture not mandatory
49
ASTM D 1837
Volatility of Liquefied Petroleum (LP) Gases
SCOPE
This test method is a measure of the relative purity of the various types of
liquefied petroleum (LP) gases and helps to ensure suitable volatility performance.
941940 - TESTER FOR LPG
OTHER STANDARDS
NFM41012 - ISO 6620
REF. 941940
Complete apparatus, with test tube, 2 Dewar flasks and armored thermometer
SPARE PARTS
19350
941942
15164
15165
Weathering cone shaped tube
Unsilvered Dew ar f lask
A STM thermometer 99C
Sleeve f or 99C thermometer
ASTM D 1838
picture not mandatory
Copper Strip Corrosion by Liquefied
Petroleum (LP) Gases
SCOPE
This test method detects the presence of components in liquefied petroleum gases which may be corrosive to copper.
OTHER STANDARDS
IP 411 - NFM 41007 - ISO 6251
REF. 941432
941432 - THERMOSTATIC BATH (3 place)
Electronic constant thermostatic bath , 3 vessels capacity, with thermometer and digital display. Equipped with adjustable stirring device, low water
cut-off, cooling coil for external cryostat and drain cock.
NECESSARY ACCESSORIES
24541
15114
941905
941906
12067
9414850
11499
22505
Single strip polishing vise
Copper strip corrosion test standard
Corrosion test vessel (150 x 38 mm)
Suspension f or test cylinder
Silicon carbide paper 240 grits
Copper strip semi-f inished w ith hole (pack of 24)
A STM thermometer 12C
Silicon carbide pow der 150 mesh (1 kg)
230
V
16
A
50
Hz
30
Kg
w 470 mm
d 470 mm
h 860 mm
on request
115V 60Hz
picture not mandatory
SPARE PARTS
941435
12067
9414850
9417905
11499
22505
941909
Heating element (2000 W)
Silicon carbide paper 240 grits
Copper strip semi-f inished w ith hole (pack of 24)
Pt 100 probe (250x5 mm)
A STM thermometer 12C
Silicon carbide pow der 150 mesh (1 kg)
Spare gasket f or test vessel (pack of 10)
ASTM D 2001
Depentanization of Gasoline and Naphthas
SCOPE
This test method covers the removal of pentanes and lighter hydrocarbons
from gasolines, naphthas and similar petroleum distillates to prepare samples suitable for the determination of hydrocarbon types in accordance with
Test Method D 1319 or Test Method D 2789.
REF. 21593
Depentanization apparatus complete
SPARE PARTS
19398
Set of glassw are f or depentanization
CN06-2uk
(all previous editions obsolete)
50
ASTM D 2002
Isolation of Representative Saturates Fraction from Low-Olefinic Petroleum Naphthas
SCOPE
This practice covers the isolation of a representative saturates fraction from
depentanized hydrocarbon mixtures that distil below 221°C and that contain less than 1 volume percent of olefinic hydrocarbons.
REF. 19399
Complete adsorption column for low olefinic concentration
ASTM D 2003
Isolation of Representative Saturates Fraction from High-Olefinic Petroleum Naphthas
SCOPE
This practice covers the isolation of a representative saturates fraction from
depentanized hydrocarbon mixtures that distil below 221°C.
REF. 19400
High efficiency column
ACCESSORY
13603
Spherical ground joint w ith nipple
ASTM D 2068
Filter Blocking Tendency of Distillate Fuel
Oils
41800 - PORTABLE MODEL NBF 241
SCOPE
This test method describes a procedure for determining the filter blocking
tendency (FBT) of distillate fuel oils where the end use demands an exceptional degree of cleanliness.
OTHER STANDARD
IP 387
REF. 41800
Automatic portable model NBF 241 with printer for determining the FBT.
The pressure/flow curve is printed at the end of the test as well as the
calculation type and results.
230
V
5
A
50
Hz
20
Kg
w 320 mm
d 580 mm
h 360 mm
on request
115V 60Hz
picture not mandatory
REF. 41801
Automatic bench top model NBF 240 with printerfor determining the FBT.
The pressure/flow curve is printed at the end of the test as well as the
calculation type and results.
41801 - BENCH TOP MODEL NBF 240
SPARE PARTS
12450
Beaker tall f orm (400 ml)
27773
Filter in f iberglas s (s et of 100)
40390
41803
41805
41810
41811
Printer paper Seyko DPU 414 (roll)
Pt100 probe
Filter holder stainless steel
Tef lon gasket and grating (kit)
Tygon tube 0.8 mm diam. (15 m roll)
CN06-2uk
(all previous editions obsolete)
230
V
5
A
50
Hz
20
Kg
w 260 mm
d 535 mm
h 500 mm
on request
115V 60Hz
picture not mandatory
51
ASTM D 2112
Oxidation Stability of Inhibited Mineral
Insulating Oil by Rotating Bomb
See other application under ASTM D 2272
SCOPE
This test method utilizes an oxygen-pressured bomb to evaluate the oxidation stability of inhibited mineral oils.
REF. 9416298
Oil thermostatic bath for 2 rotating test vessels
9416298 - OXIDATION STABILITY
NECESSARY ACCESSORIES
21339
9416292
9416291
9416293
9416295
9416296
11554
Catalyst copper coil (ready to use)
Pressure recorder (1 per vessel)
Oxidation vessel (stainless steel)
Sample container w ith tef lon cover
Tef lon cover f or glass sample container
Tef lon disc to be placed under sample container
A STM thermometer 96C
OPTIONAL ACCESSORIES
9416301
230
V
16
A
50
Hz
70
Kg
w 700 mm
d 900 mm
h 910 mm
Support rack f or 2 vessels
picture not mandatory
SPARE PARTS
21339
9416303
9416293
9416297
9416300
Catalyst copper coil (ready to use)
Charts f or pressure recorder (pack of 60)
Sample container w ith tef lon cover
Pen f or recorder
"O" ring f or vessel cover
ASTM D 2158
Residues in Liquefied Petroleum (LP) Gases
SCOPE
This test method covers the determination of the extraneous materials weathering above 38°C that are present in liquefied petroleum gases.
OTHER STANDARD
IP 317
941957 - TESTER FOR LPG
REF. 941957
Apparatus for determining the extraneous residues above 100°F
Complete with thermometer 57C.
SPARE PARTS
19350
941942
11492
11529
Weathering cone shaped tube
Unsilvered Dew ar f lask
A STM thermometer 5C
A STM thermometer 57C
picture not mandatory
CN06-2uk
(all previous editions obsolete)
52
ASTM D 2196
Rheological Properties of Non-Newtonian
Materials by Rotational Viscometer
See other application under ASTM D 2669 - D 2983 - D 4287
SCOPE
This test method covers the determination of rheological properties of nonnewtonian materials by rotational (Brookfield) viscometer.
QUOTATION ON REQUEST
ASTM D 2265
Dropping Point of Lubricating Grease Over
Wide Temperature Range
SCOPE
This test method covers the determination of the dropping point of lubricating grease.
OTHER STANDARD
ISO 6299
QUOTATION ON REQUEST
ASTM D 2272
Oxydation Stability of Steam Turbine Oils by
Rotating Bomb
See instrument under ASTM D 2112
SCOPE
This test method utilizes an oxygen-pressured bomb to evaluate the oxidation stability of new and in service turbine oils having the same composition
(base stock and additives) in the presence of water and a copper catalyst
coilm at 150°C.
OTHER STANDARD
IP 229
ASTM D 2273
Trace Sediment in Lubricating Oils
See instrument under ASTM D 91
SCOPE
This test method covers the determination of trace amounts (less than 0.05
volume %) of sediment in lubricating oils.
ASTM D 2274
Oxidation Stability of Distillate Fuel Oil
(Accelerated Method)
See instruments under ASTM D 943
SCOPE
This test method covers the measurement of inherent stability of middle
distillate petroleum fuel under accelerated oxidizing conditions.
OTHER STANDARDS
IP 388 - NFM 07047 - ISO 12205
CN06-2uk
(all previous editions obsolete)
53
ASTM D 2386
Freezing Point of Aviation Fuels
SCOPE
This test method covers the determination of the temperature below which
solid hydrocarbon crystals may form in aviation turbine fuels and aviation
gasoline.
OTHER STANDARDS
IP 16 - NFM 07048 - ISO 3013 - DIN 51421
REF.941556
Complete manual freezing point apparatus, comprising : jacketed sample
tube, brass packing gland for stirrer, brass wire stirrer, vacuum flask
unsilvered with support and thermometer.
941556 - FREEZING POINT
REFERENCE FLUID (see page 76)
SPARE PARTS
513462
9415562
9415563
9415564
11566
513463
Jacketed sample tube (double w alls)
Gland, brass packing f or stirrer
Stirrer
V acuum f lask unsilvered
A STM thermometer 114C
Cork f or sample tube
5
Kg
w 200 mm
d 200 mm
h 450 mm
picture not mandatory
NECESSARY ACCESSORY
941597
Dry ice machine
AUTOMATIC INSTRUMENT
Special standard on request for dedicated territories
CN06-2uk
(all previous editions obsolete)
54
ASTM D 2420
Hydrogen Sulfide in Liquefied Petroleum
(LP) Gases (Lead Acetate Method)
SCOPE
This test method covers the detection of hydrogen sulfide in liquified petroleum (LP) gases.
941958 - HYDROGEN SULFIDE TESTER
OTHER STANDARD
NFM 41011
REF. 941958
Apparatus for hydrogen sulfide in liquefied petroleum gases
SPARE PARTS
9419581
9412209
9417900
Set of glassw are
Heating element (1500 W)
Pt 100 probe (30x6 mm)
230
V
6
A
50
Hz
19
Kg
w 375 mm
d 260 mm
h 417 mm
picture not mandatory
ASTM D 2440
Oxidation Stability of Mineral Insulating Oil
See other application under IP 48 - IP 280 - IP 306 - IP 307 - IP 335
SCOPE
This test method indicates the tendency of a mineral insulating oil to deteriorate on oxidation under specified conditions.
REF. 941650
12-test aluminium block bath with electronic controller with digital temperature display and setting, using PT 100 sensor. Temperature can be adjusted
between 50 and 210°C +/- 0,5°C to comply with standards requests.
This instrument is delivered without flowmeter and thermometer.
(12 of each must be ordered separately).
This instrument is delivered without glassware.
(24 of each must be ordered separately).
NECESSARY ACCESSORIES
9416501
9416502
19375
25959
25960
25961
Flow meter f or 15 l/h air (IP48)
Flow meter f or 1 l/h oxygen (IP 280-306-307-335)
Glassw are f or A LL methods (each)
IP thermometer 81C
IP thermometer 15C
IP thermometer 22C
941650 - OXIDATION STABILITY TESTER
230
V
10•6
A
50
Hz
55
Kg
w 650 mm
d 620 mm
h 860 mm
on request
115V 60Hz
picture not mandatory
SPARE PARTS
19375
9416508
9417834
25959
25960
25961
Glassw are f or A LL methods (each)
Heating element (1500 W)
Pt 100 probe (60x3.15 mm)
IP thermometer 81C
IP thermometer 15C
IP thermometer 22C
CN06-2uk
(all previous editions obsolete)
55
ASTM D 2500
Cloud Point of Petroleum Products
See instruments under ASTM D 97
SCOPE
This test method covers only petroleum products which are transparent in
layers 40mm in thickness, and with a cloud point below 49°C.
OTHER STANDARDS
IP 219 - NFT 60105 - ISO 3015
ASTM D 2595
Evaporation Loss of Lubricating Greases Over
Wide-Temperature Range
SCOPE
This test method covers the determination of evaporation loss of lubricating
greases at temperatures between 93 and 316°C.
QUOTATION ON REQUEST
CN06-2uk
(all previous editions obsolete)
56
ASTM D 2602
Apparent Viscosity of Engine Oils Using the
Cold-Cranking Simulator
See other application under ASTM D 5293
SCOPE
This test method covers the laboratory determination of apparent viscosity
of engine oils at 0°F and at high shear rates.
OTHER STANDARD
DIN 51377
QUOTATION ON REQUEST
ASTM D 2619
Hydrolytic Stability of Hydraulic Fluids
(Beverage Bottle Method)
SCOPE
This test method covers the determination of the hydrolytic stability of petroleum or synthetic-base hydraulic fluids.
941995 - HYDROLYTIC STABILITY
REF. 941995
Oven complete with filtration assembly, 12 bottles, crown cork, copper strips
and protections.
SPARE PARTS
9417444
27532
941952
941953
9419954
9419955
Gloves (pair)
Membrane f ilters (pack of 100)
Caps w ith inert seals (pack of 100)
Bottle (200 ml)
Copper strips (pack of 20)
Heating elements f or oven (per set of 8)
230
V
10
A
50
Hz
80
Kg
w 800 mm
d 650 mm
h 900 mm
picture not mandatory
ASTM D 2624
Electrical Conductivity of Aviation and
Distillate Fuels
SCOPE
This test method covers the determination of the electrical conductivity of
aviation and distillate fuels with and without a static dissipator additive.
OTHER STANDARDS
IP 274 - ISO 6297
REF. 23628
Portable Conductivity meter
SPARE PART
23629
Carbon/zinc spare battery (9 V )
23628 - CONDUCTIVITY METER
Battery
V
A
Hz
5
Kg
w 400 mm
d 210 mm
h 150 mm
picture not mandatory
CN06-2uk
(all previous editions obsolete)
57
ASTM D 2669
Apparent Viscosity of Petroleum Waxes
Compounded with Additives (Hot Melts)
See instrument under under ASTM D 2196
SCOPE
This test method covers the determination of the apparent viscosity of petroleum waxes compounded with additives (hot melts).
ASTM D 2699
Knock Characteristics of Motor by the
Research Method
See other applications under ASTM D 613
SCOPE
This test method covers the determination of the knock characteristics of
motor gasolines, intended for use in spark-ignition engines, in terms of ASTMIP research octane numbers.
OTHER STANDARDS
IP 237 - NFM 07026 - ISO 5163 - DIN 51756
ASTM D 2700
Knock Characteristics of Motor and Aviation
Fuels by the Motor Method
See instruments under ASTM D 613
SCOPE
This test method covers the determination of the knock characteristics of
motor and aviation gasolines, intended for use in spark-ignition engines.
OTHER STANDARDS
IP 236 - ISO 5164
CN06-2uk
(all previous editions obsolete)
58
ASTM D 2784
Sulfur in Liquefied Petroleum Gases
(Oxy-Hydrogen Burner Method)
SCOPE
This test method covers the determination of total sulfur in liquefied petroleum gases containing more than 1µg/g.
OTHER STANDARDS
IP 243 - NFM 41009 - ISO 4260 - DIN 51408
REF. 24516
The testerwith metallic structure includes stainless steel (not quartz) oxihydrogen burner, quartz combustion chamber cooled by water, gas supply
system with flowmeters and adjustment valves, gas safeties, dry vacuum
pump and protective screen, delivered without glassware
NECESSARY ACCESSORIES
21343
21344
Set of glassw are f or Wickbold Tester
Liquef ied gas cylinder w ith valves
SPARE PARTS
20928
20983
20984
10688
Quartz combustion chamber
A bsorber w ith f ritted plate
Trap
Stainless steel burner oxygen / hydrogen
24516 - WICKBOLD TESTER
230
V
2
A
50
Hz
50
Kg
w 700 mm
d 500 mm
h 650 mm
picture
picture not
not mandatory
mandatory
21344 - LPG CYLINDER
picture not mandatory
ASTM D 2872
Effect of Heat and Air on a Moving Film of
Asphalt (RTFOT)
SCOPE
This test method is intended to measure the effect of heat and air on a
moving film of semisolid asphaltic materials.
OTHER STANDARD
NF EN 12607-1
REF. 941877
Double wall illuminated oven with glass window, 8 places revolving vertical
shelf, 8 glass containers, thermometer and instruction manual.
SPARE PARTS
9418762
23680
Bulb 230V /15W
Standardized glass container
9418779
Heating element (500 W)
11500
A STM thermometer 13C
CN06-2uk
(all previous editions obsolete)
941877 - OVEN “RTFOT”
230
V
10
A
50
Hz
50
Kg
w 750 mm
d 650 mm
h 820 mm
picture not mandatory
59
ASTM D 2893
Oxidation Characteristics of Extreme
Pressure Lubricating Oils
See instrument under ASTM D 943
SCOPE
This test method covers determination of the oxidation characteristics of
extreme-pressure fluid lubricants, gear oils, or mineral oils.
ASTM D 2983
Low-Temperature Viscosity of Automotive
Fluid Lubricants (Brookfield Viscometer)
SCOPE
This test method describes the use of the Brookfield viscometer for the
determination of the low-shear-rate viscosity of automotive fluid lubricants
in the temperature range from -5 to -40°C.
OTHER STANDARDS
IP 267 - NFT 60152 - ISO 9262 - DIN 51398
QUOTATION ON REQUEST
BROOKFIELD VISCOMETERS (See ASTM D 2196)
ASTM D 3230
Salts in Crude Oil (Electrometric Method)
SCOPE
This test method covers the determination of salts in crude oil.
OTHER STANDARD
IP 265
REF. 942287
Complete salt-in-crude analyzer with test cell, electrode assembly and test
leads, digital autoranging meter for reading the voltage and current.
SPARE PARTS
9412871
19035
942287 - CRUDE OIL ANALYZER NSB 210
230
V
2.5
A
50
Hz
8
Kg
w 360 mm
d 300 mm
h 150 mm
Electrode w ith cover
Test cell
picture not mandatory
ASTM D 3235
Solvent Extractables in Petroleum Waxes
See instrument under ASTM D 721
SCOPE
This test method covers the determination of solvent extractables in petroleum waxes.
CN06-2uk
(all previous editions obsolete)
60
ASTM D 3278
Flash Points of Liquids by Setaflash-ClosedCup Apparatus
See other applications under ASTM D 3828
SCOPE
This test method covers the determination of flash points of liquids by the
Setaflash closed cup tester .
QUOTATION ON REQUEST
ASTM D 3427
Air Release Properties of Petroleum Oils
SCOPE
This test method covers the ability of a petroleum-type steam turbine oil to
separate entrained air.
OTHER STANDARDS
IP 313 - NFT 60149 - DIN 51381
REF. 941688
941688 - IMPINGER TEST RIG
Complete equipment for determination of the ability of an oil to separate
entrained air in hydraulic, turbine and other lubricating oils.
ACCESSORIES
12628
12629
9416885
21375
5 ml plunger
10 ml plunger
Balance w ith acquisition sof tw are (62 g / 0.1 mg)
Electronic stopw atch
SPARE PARTS
9417444
9416881
12627
9417834
11499
Gloves (pair)
Heating element (250 W)
Sample glassw are complete
Pt 100 probe (60x3.15 mm)
A STM thermometer 12C
CN06-2uk
(all previous editions obsolete)
230
V
6
A
50
Hz
105
Kg
w 590 mm
d 340 mm
h 590 mm
picture not mandatory
61
ASTM D 3828
Flash Points by Small Scale Closed Tester
See instruments under ASTM D 3278
SCOPE
This test method covers procedure for the determination of the flash point
by a small scale closed tester.
OTHER STANDARDS
IP 303 - ISO 3679
ASTM D 3829
Predicting the Borderline Pumping
Temperature of Engine Oil
See other application under ASTM D 4684
SCOPE
This test method covers the prediction of the borderline pumping temperature (BPT) of engine oils through the use of a 16 h cooling cycle over the
temperature range from 0 to -40°C.
OTHER STANDARD
SAE J300
QUOTATION ON REQUEST
ASTM D 3948
Water Separation Characteristics of Aviation
Turbine Fuels by Portable Separometer
See other application under ASTM D 4860
SCOPE
This test method provides a rapid portable means for field and laboratory
use to rate the ability of aviation turbine fuels to release entrained or emulsified water when passed through fiberglass coalescing material.
QUOTATION ON REQUEST
ASTM D 4007
Water and Sediment in Crude Oil by the
Centrifuge Method (Laboratory Procedure)
See instrument under ASTM D 91
SCOPE
This test method describes the laboratory determination of water and sediment in crude oils by means of the centrifuge procedure.
CN06-2uk
(all previous editions obsolete)
62
ASTM D 4057
Manual Sampling of Petroleum and
Petroleum Products
SCOPE
This practice covers procedures for manually obtaining representative samples of petroleum products of a liquid, semi-liquid, or solid state whose vapor
pressure at ambient conditions is below 101 kPa.
OTHER STANDARDS
NFM 07001 - ISO 3170 - DIN 51750
REF. 22213
22213 - SAMPLING BOTTLE
Brass weighted bottle, neck 19mm.
REF. 22214
Brass weighted bottle, neck 38mm
REF. 519032
Sampling thief, bomb type (1 liter) diameter 80 mm.
NECESSARY ACCESSORIES
519037
519039
Chain nickel-plated brass 25 m length
Nylon cable 50 m length
picture not mandatory
ASTM D 4287
High-Shear Viscosity Using the ICI
Cone/Plate Viscometer
See instrument under ASTM D 2196
SCOPE
This test method covers the determination of high-shear viscosity using the
ICI cone/plate viscometer.
ASTM D 4310
Sludging and Corrosion Tendencies of
Inhibited Mineral Oils
See instrument under ASTM D 943
SCOPE
This test method is used to evaluate the tendency of inhibited mineral oil
based steam turbine lubricants and mineral oil based anti-wear hydraulic
oils to corrode copper catalyst metal and to form sludge during oxidation in
the presence of oxygen, water, and copper and iron metals at an elevated
temperature.
ASTM D 4377
Water in Crude Oils by Potentiometric Karl
Fischer Titration
See instrument under ASTM D 1744
SCOPE
This test method covers the determination of water in the range from 0.02
to 2% in crude oils.
OTHER STANDARD
IP 356
CN06-2uk
(all previous editions obsolete)
63
ASTM D 4530
Determination of Carbon Residue
(MCRT)
See other application under ASTM D 189 - D 482
SCOPE
This test method covers the determination of the amount of carbon residue
formed after evaporation and pyrolisis of petroleum materials under certain
conditions and is intended to provide some indication of the relative coke
forming tendency of such materials.
OTHER STANDARDS
IP 398 - ISO 10370 - DIN 51551
REF. 41023
The NMC 440 model, fully automatic tester, provides 3 preset methods
plus 17 additional ones with 4 heating segments. It performs Conradson
test up to 750°C under automatic controlled atmosphere. Test report including weights, results and temperature curve printed on the delivered printer
or send to computer throught RS232C output.
MAIN CONSUMABLES
41001
41002
41003
41004
41046
2 ml borosilicate glass sample vial (D 4530)
16 ml borosilicate glass sample vial (D 4530)
2 ml quartz sample vial ash content (re-usable)
16 ml quartz sample vial ash content (re-usable)
16 ml vials (pack of 144) f or single use
41047
2 ml vials (pack of 144) for single use
41026
4 ml borosilicate glass sample tube (ISO 10370)
41023 - MICRO CONRADSON NMC 440
230
V
16
A
50
Hz
35
Kg
w 430 mm
d 630 mm
h 480 mm
on request
115V 60Hz
picture not mandatory
SPARE PARTS
41025
41027
10508
10515
10510
40390
Gas connection kit-2 gas outputs
Holder f or 25-50-100 g. porcelain crucibles
Porcelain crucible, 40 ml tall f orm (pack of 6 )
Porcelain crucible, 80 ml low f orm (pack of 6 )
Porcelain crucible,120 ml tall f orm (pack of 6 )
Printer paper Seyko DPU 414 (roll)
REF. 941670
The NMC 210, automatic apparatus only for the standard D 4530 is
delivered ready to use equipped with accessories (2ml vial, holder for
vial, cleaning cable, holder hook). The test is performed automatically
under atmosphere controlled by programmed controller.
OPTIONAL ACCESSORIES
41006
941670 - MICRO CONRADSON NMC 210
Holder f or v ial 16 ml (6x )
41007
Mixed holder 2 and 16 ml (7x)
MAIN CONSUMABLES
41001
41002
41003
41004
41046
2 ml borosilicate glass sample vial (D 4530)
16 ml borosilicate glass sample vial (D 4530)
2 ml quartz sample vial ash content (re-usable)
16 ml quartz sample vial ash content (re-usable)
16 ml vials (pack of 144) f or single use
41047
2 ml vials (pack of 144) for single use
SPARE PARTS
41005
941667
Holder f or vial 2 ml (12x)
Solenoid valve f or nitrogen
941668
941669
Solenoid valve f or air
Regulation thermocouple
CN06-2uk
(all previous editions obsolete)
230
V
10
A
50
Hz
15
Kg
w 250 mm
d 300 mm
h 600 mm
on request
115V 60Hz
picture not mandatory
64
ASTM D 4684
Determination of Yield Stress and Apparent
Viscosity of Engine Oils at Low Temperature
See instrument under ASTM D 3829
SCOPE
This test method covers the measurement of the yield stress and viscosity
of engine oils after cooling at controlled rate over a period exceeding 45 h
to a final test temperature between -10 and -40°C.
ASTM D 4860
Free Water and Particulate Contamination in
Mid-Distillate Fuels (Clear and Bright Rating)
See instrument under ASTM D 3948
SCOPE
This test method provides a rapid, portable means for field and laboratory
use to visually inspect for particulate matter and numerically rate free water
in aviation turbine and distillate fuels.
ASTM D 5133
Temperature Dependence of Lubricating Oils
Using a Temperature-Scanning Technique
SCOPE
This test method determines the temperature at which an oil can become
unsuitable for lubrication of a mechanical device such as an engine, because of insufficient flow of the bulk oil in the sump to the oil screen.
QUOTATION ON REQUEST
ASTM D 5191
Vapor Pressure of Petroleum Products
(Mini Method)
SCOPE
This test method covers the use of automated vapor pressure instruments
to determine the total vapor pressure exerted in vacuum by air-containing,
volatile, liquid petroleum products.
QUOTATION ON REQUEST
CN06-2uk
(all previous editions obsolete)
65
ASTM D 5293
Apparent Viscosity of Engine Oils Using the
Cold-Cranking Simulator
See instrument under ASTM D 2602
SCOPE
This test method covers the laboratory determination of apparent viscosity
of engine oils at temperatures between -5 and -30°C at shear stresses of
approximately 50000 to 100000 Pa and shear rates of approximately 100000
to 10000 s-1 and viscosities of approximately 500 to 10000 mPa*s.
ASTM D 5800
Evaporation Loss of Lubricating Oils by the
Noack Method
SCOPE
This test method covers a procedure for determining the evaporation loss
of lubricating oils (engine oils) using the Noack evaporative tester.
OTHER STANDARDS
NFT 60161 - DIN 51581- CEC L40 A93
REF. 941783
Evaporative capacity tester for lubricating oils, complete with P I D temperature regulator, set of glassware, manometer and liquid, one crucible
with tools, one pair protecting gloves, thermometer with certificate.
OPTIONAL ACCESSORIES
9417837
9417838
9417831
9417832
21375
Standardization oil RL 172/5 (1 liter)
V acuum pump model ME2C
A utomated vacuum controller
Graphic data recorder and printer
Electronic stopw atch
941783 - NOACK TESTER
230
V
10
A
50
Hz
36
Kg
w 850 mm
d 370 mm
h 510 mm
SPARE PARTS
9417444
14089
2094802
9417830
9417834
9417835
9417836
9417907
23190
Gloves (pair)
silicon tubing inside diam. 4 mm (1 meter)
Wood metal (250g)
Heating element (set of 2)
Pt 100 probe (60x3.15 mm)
Stainless steel crucible
Set of glassw are
Pt 100 probe GDR (120x2 mm)
Thermometer w ith certif icate (+40/+260°C)
ASTM D 6082
picture not mandatory
High Temperature Foaming Characteristics
of Lubricating Oils
See instrument under ASTM D 892
SCOPE
This test method describes the procedure for determining the foaming characteristics of lubricating oils (specifically transmission fluid and
motor oil) at 150 °C.
CN06-2uk
(all previous editions obsolete)
66
ASTM D 6371
Cold Filter Plugging Point
See other application under IP 309 - IP 419
SCOPE
This test method covers the determination of the cold filter plugging point
(CFPP) of diesel and domestic heating fuels using either manual or automated test equipment.
REF. 20878
This model, single unit includes double wall bath with insulation, jacket, test
tube, insulating ring and spaces, jacket stand, 3-hole stopper, pipet, filtration set and thermometers. Cooling is achieved by dry ice machine.
REF. 20886
This model, single unit includes double wall bath with insulation, jacket, test
tube, insulating ring and spaces, jacket stand, 3-hole stopper, pipet, filtration set and thermometers. It is equipped with a cooling coil to be connected
on a cryostate.
NECESSARY ACCESSORIES
27502
20879
941597
23205
V acuum pump
V acuum regulator + manometer + 3w ay cock
Dry ice machine
Cryostat TLC 80 - 11 liters (-80/+20°C ±.05)
SPARE PARTS
17885
20880
20881
20882
11492
11493
CFPP test tube
Jacket
Pipet f or manual apparatus
Filtration device
A STM thermometer 5C
A STM thermometer 6C
REF. 60200
NTL 450 is delivered complete with necessary glassware, temperature probe, printer and instruction manual.
- Detection by specific optical cells
- Visualisation of the different cooling steps
- Possibility to use a programmed linear cooling slope
- Quick fixation on measuring head
- Visualisation of the sucking up time & release time sample
- Easy access to maintenance paramaters by software
- Easy access to hardware maintenance
- Electronic vacuum regulation with 15 litres per hour
NECESSARY ACCESSORY
23205
Cryostat TLC 80 - 11 liters (-80/+20°C ±.05)
60200 - CFPP MODEL NTL 450
230
V
A
50
Hz
25
Kg
w 270 mm
d 500 mm
h 600 mm
SPARE PARTS
17885
CFPP test tube
20882
Filtration device
21916
40809
40822
CFPP pipet
Basket f or tube (set of 2)
45µ Filter on ring
picture not mandatory
CFPP MODEL NTL 450 - screen shot
picture not mandatory
CN06-2uk
(all previous editions obsolete)
67
IP 48
Oxidation Characteristics of Lubricating Oil
See instrument under ASTM D2440
SCOPE
This test method indicates the tendency of a lubricating oil to deteriorate on
oxidation under specified conditions.
IP 59
Specific Gravity of Gases (Effusion Method)
SCOPE
This test method is used for the determination of the density or relative
density of petroleum products as normally handled.
941960 - SCHILLING EFFUSIOMETER
REF. 941960
Effusiometer Schilling, complete with thermometer but without stand.
OPTIONAL ACCESSORY
941961
Metallic stand
SPARE PARTS
19010
941965
9419640
21675
Outer glass cylinder
Orif ice plate
Inner glass cylinder w ith sealed outf it
IP thermometer 39C
IP 70
15
Kg
w 240 mm
d 240 mm
h 370 mm
picture not mandatory
Redwood Viscosity
SCOPE
The method is primarily intended for the determination of the viscosity of
any petroleum product which flows in a Newtonian manner, i.e. possesses
a linear relationship between shearing stress and rate of shear under the
conditions of the test.
REF. 27241
1-PLACE REDWOOD VISCOMETER
apparatus for determination of viscosity as a time of flow (30-2000s)
main features :
* electronic temperature controller with digital display
* test temperature range : from room up to 93,3°C (+/- 0,2°C)
* polished brass calibrated cup with cover and stainless steel orifice
* water bath with cover and cooling coil
Apparatus delivered whithout accessories
NECESSARY ACCESSORIES
521341
Redw ood flask 50 ml
521367
521369
IP thermometer 8C
IP thermometer 9C
CN06-2uk
(all previous editions obsolete)
27241 - REDWOOD VISCOMETER
230
V
2
A
50
Hz
8
Kg
w 350 mm
d 270 mm
h 420 mm
picture not mandatory
68
IP 72
Viscosity of Cutback Bitumen
SCOPE
This test method provides a measure of the viscosity by determining the
time of efflux of 50 ml of a cut-back bitumen, at 40°C, through a 10mm
orifice.
OTHER STANDARDS
NF T66005 - DIN 1995
REF.941826
BRTA viscometer (4 unit) with electronic controller, electric stirrer, digital
display, 4 receivers but without cup and valve.
941826 - BRTA VISCOMETER (4 places)
NECESSARY ACCESSORIES
11175
941828
941830
941831
941834
941832
941833
9417709
9417902
521367
21375
Graduated receiver
Cup w ith orif ice 2 mm
Cup w ith orif ice 4 mm
Cup w ith orif ice 10 mm
Ball valve 2 mm
Ball valve 4 mm
Ball valve 10 mm
Heating element (1000 W)
Pt 100 probe (60x5 mm)
IP thermometer 8C
Electronic stopw atch
IP 80
230
V
10
A
50
Hz
27
Kg
w 800 mm
d 250 mm
h 650 mm
picture not mandatory
Breaking Point of Bitumen (Fraas Method)
SCOPE
This test method determines the temperature below which a bitumen tends
to break rather than flow when stressed.
OTHER STANDARDS
NF T66026 - DIN 52012
REF. 29250
Breaking Point Apparatus
the apparatus consists of bending apparatus, plate made of springly stainless 41x20x0,15 mm, cooling apparatus, IP 42C thermometer, plate and
stand
ACCESSORIES
28754
Hot plate SB 160
27555
29251
Stainless steel plate (pack of 10)
Set of glass tubes
29250 - FRAAS APPARATUS
V
A
Hz
8
Kg
w 350 mm
d 270 mm
h 420 mm
picture not mandatory
CN06-2uk
(all previous editions obsolete)
69
IP 143
Asphaltenes in Crude Petroleum and
Petroleum Products (Heptane Insolubles)
SCOPE
This test method specifies a procedure for the determination of the heptane
insoluble asphaltene content of gas oil, diesel fuel, fuel oils, lubricating oil,
bitumen and crude petroleum which has been topped to an oil temperature
of 260°C.
OTHER STANDARDS
NF T60115 - DIN 51595
REF. 10479
Manual apparatus including extractor and condenser.
NECESSARY ACCESSORIES
14694
15643
23860
Evaporation cup
Filter paper - diameter 110 mm (pack of 100)
Hot plate (1500 W)
SPARE PARTS
19364
21918
21919
23883
23884
Condenser
500 ml conical f lask CN29
Ref lux extractor CN29/34
500 ml conical f lask CN24
Ref lux extractor CN24/34
24472 - ASPHALTENE EXTRACTOR
REF. 24472
ASPHAN 02 semi-automatic extractor for stand-alone precipitation, filtration, washing, recycling, redissolution and evaporation processes of
asphaltene.
SPARE PARTS
21364
500 ml low er boiler
21365
21368
21369
21372
1000 ml upper boiler w ith stopper
Condenser of the collector
500 ml solvent collecting f lask
Filter "Mitex" (box of 50)
21366
Double s urf ac e c ondens er
21367
Cooler
CN06-2uk
(all previous editions obsolete)
230
16
50
32
w 320
d 580
h 1250
V
A
Hz
Kg
mm
mm
mm
picture not mandatory
70
IP 161
Gauge Vapor Pressure of Liquefied
Petroleum Gas Products
See instrument under ASTM D1267
SCOPE
This test method describes a method for the determination of gauge vapor
pressures of liquefied petroleum gas products at temperatures within the
approximate range of 35 to 70°C.
IP 170
Flash Point by Abel Closed Cup Tester
SCOPE
This test method covers the determination of the closed cup flash point of
petroleum products and other liquids having flash point between -30 and
70°C.
OTHER STANDARDS
NFT 66009 - DIN 51755
REF. 941601
941601 - MANUAL ABEL NAB 110
Manual apparatus Abel model NAB 110, with electric heater and gas test
jet.
OPTIONAL ACCESSORY
941143
Energy regulator
SPARE PARTS
941604
9416041
21227
21228
21229
Cup
Lid shutter and stirrer w ith gas test jet
IP thermometer 74C w ith collar
IP thermometer 75C w ith collar
IP thermometer 2C
230 V
2A
50 Hz
7 Kg
w 250 mm
d 280 mm
h 420 mm
picture not mandatory
REF. 41300
Automatic Abel Tester model NAB 440 equipped with very large display
and printer, it is designed to operate from -30 to +110 °C and can be connected to a cryostat for test under 40°C. User-friendly software allows full
configuration and recording of 100 test results.
OPTIONAL ACCESSORIES
23203
23204
Cryostat TLC 30 - 5 liters (-30/+60°C ±.1)
Cryostat TLC 40 - 11 liters (-45/+20°C ±.05)
SPARE PARTS
40390
41301
41303
41306
41309
41310
Printer paper Seyko DPU 414 (roll)
A bel cup
A bel cover
Stirrer f lexible
Detection cable
Pt 100 probe
CN06-2uk
(all previous editions obsolete)
41300 - AUTOMATIC ABEL NAB 440
230
V
1
A
50
Hz
20
Kg
w 260 mm
d 535 mm
h 500 mm
on request
115V 60Hz
picture not mandatory
71
IP 227
Silver Strip Corrosion of Aviation Turbine Fuel
See instrument under ASTM D130
SCOPE
This test method specifies a method for the determination of the corrosive
tendencies towards silver, of aviation turbine fuels.
IP 280
Oxidation Stability of Unused Inhibited
Mineral Turbine Oils
See instrument under ASTM D2440
SCOPE
This test method specifies a method for the determination of the resistance
to oxidation under specified conditions of unused inhibited mineral turbine
oils.
IP 294
Shear Stability of Polymer-Containing Oils
(diesel Injector Rig Method)
SCOPE
This test method covers procedures for evaluating the shear stability of
polymer-containing oils in terms of the permanent viscosity loss resulting
when a sample is mechanically stressed under the test conditions.
QUOTATION ON REQUEST
IP 306
Oxidation Stability of Straight Mineral Oil
See instrument under ASTM D2440
SCOPE
This test method indicates the tendency of straight mineral oil to deteriorate
on oxidation under specified conditions.
IP 307
Oxidation Stability of Mineral Insulating Oil
See instrument under ASTM D2440
SCOPE
This test method indicates the tendency of insulating oil to deteriorate on
oxidation under specified conditions.
CN06-2uk
(all previous editions obsolete)
72
IP 309
Cold Filter Plugging Point
See instrument under ASTM D 6371
SCOPE
This test method covers the determination of the cold filter plugging point
(CFPP) of diesel and domestic heating fuels using either manual or automated test equipment.
IP 335
Oxidation Stability of Inhibited Mineral
Insulating Oils
See instrument underASTM D2440
SCOPE
This test method gives a measure of the tendency of new, inhibited, mineral insulating oils to oxidize by measurement of an induction period.
IP 419
Simulated Filter Plugging Point
See instruments under ASTM D 6371
SCOPE
This test method covers the automatic determination of the simulated filter
plugging point (SFPP) of middle distillate fuels.
CN06-2uk
(all previous editions obsolete)
73
ISO 3679
Closed Cup Flash Point at Set Temperature
SCOPE
This test method covers determination of the flash point at set temperature
in closed cup.
OTHER STANDARD
NFT 30051
REF.942690
GO/NO GO closed cup flash point tester. The model NPV 220 is designed
for paint, supple, japan, laque, solvent, cosmetic, perfume, distillate and
various petroleum products.
942690 - FLASH POINT TESTER NPV 220
REF.942691
Identical to the previous unit but with heating slope. The model NPV 310 is
designed for paint, supple, japan, laque, solvent, cosmetic, perfume, distillate and various petroleum products.
NECESSARY ACCESSORIES
21604
26075
Loading syringe (pack of 100)
Mercury thermometer f or calibration purposes
230
V
5
A
50/60
Hz
7
Kg
w 240 mm
d 260 mm
h 350 mm
picture not mandatory
OPTIONAL ACCESSORY
23203
Cryostat TLC 30 - 5 liters (-30/+60°C ±.1)
SPARE PARTS
41401
Detector lead NPV 220
41403
Heating c artridge 250W
9417444
Gloves (pair)
942695
Thermocouple NPV 310
942691 - FLASH POINT TESTER NPV 310
230
V
5
A
50/60
Hz
7
Kg
w 240 mm
d 260 mm
h 350 mm
CN06-2uk
(all previous editions obsolete)
picture not mandatory
74
UOP 357
Traces of Sulfur in Petroleum Distillates
by the Nickel Reduction Method
SCOPE
This test method covers determination of traces of sulfur in petroleum distillates by the nickel reduction method.
941489 - TRACE OF SULFUR TESTER
REF.941489
Complete equipment with heating mantle, glassware and energy regulator.
SPARE PARTS
9414891
9414896
19016
19017
19018
19019
19020
19021
Heating mantle 100 ml (60 W)
Nickel Reaney catalyst (100 g)
Inlet tube
Condenser
Reaction f lask
Funnel
Test tube
Outlet tube
EN 15323
230
V
10
A
50
Hz
23
Kg
w 300 mm
d 300 mm
h 700 mm
picture not mandatory
Rotating Cylinder Ageing Test for Bitumen
(RCAT method)
SCOPE
This test method is intended to measure the ageing effect of heat and air on
a moving film of semi solid asphaltic material in the environment conditions.
941878 - AGEING OVEN NRC 210
REF.941878
Double wall illuminated oven model NRC 210 with glass window delivered
complete and ready to use for RCAT test.
SPARE PARTS
941881
Solenoid valve
941882
941883
Rotating cylinder belt
Fan belt
941884
941885
941886
Thermocouple sensor
Conical stopper
Straight stopper
9418779
Heating element (500 W)
230
V
10
A
50
Hz
115
Kg
w 750 mm
d 635 mm
h 790 mm
picture not mandatory
941878 - ACCESSORIES
picture not mandatory
CN06-2uk
(all previous editions obsolete)
75
REFERENCE PRODUCTS WITH CERTIFICATE
PRODUCT
REF.
ASTM
DESCRIPTION
LEVEL
VOLUME
GASOLINE
60018
60019
60020
60021
60022
60023
60029
D 4052
D 323
D 86
D 2700
D 2699
EN 238
ISO 20846
density at 15 °C
reid vapour pressure
automatic distillation (unleaded)
motor octane index (unleaded)
research octane index (unleaded)
benzene content
sulfur content
737 kg/m³
64 kPa
33/186 °C
87.2
98
0.39 % vol
49 mg/kg
250 ml
250 ml
250 ml
1000 ml
1000 ml
250 ml
250 ml
DIESEL
60001
60010
60002
60003
60004
60011
60005
60012
60013
60006
60014
60015
60017
D 4052
D 4052
D 2500
D 97
IP 309
D 613
D 86
D 445
D 445
D 93
D 4294
D 5453
D 5463
density at 15 °C
density at 15 °C
cloud point
pour point
cold filter plugging point
cetane index (measured)
automatic distillation
kinematic viscosity at 20 °C
kinematic viscosity at 40 °C
Pensky-Martens flash point
sulfur content
sulfur content
sulfur content
836 kg/m³
832 kg/m³
-17 °C
-22 °C
-20 °C
52.2
193/320 °C
3.572 cSt
2.356 cSt
74.5 °C
296 mg/kg
48.5 mg/kg
4.7 mg/kg
250 ml
250 ml
250 ml
250 ml
250 ml
1000 ml
250 ml
250 ml
250 ml
250 ml
50 ml
50 ml
50 ml
KEROZENE
60024
60025
60026
60027
60028
D 4052
D 2386
D 445
D 1319
D 611
density at 15 °C
congeling point
kinematic viscosity at -20 °C
aromatics content
aniline point
799 kg/m³
-48.9 °C
4.18 cSt
16.4 %
60.47
250 ml
250 ml
250 ml
250 ml
250 ml
LUBRICANT
60007
60008
60009
D 4052
D 92
D 93
density at 15 °C
Cleveland flash point
Pensky-Martens flash point
880 kg/m³
243 °C
213 °C
250 ml
250 ml
250 ml
CALIBRATION INSTRUMENT WITH CERTIFICATION
REF. 41200
41200 - CALIBRATION INSTRUMENT
Calibration instrument for the WHOLE range of automated NORMALAB
ANALIS apparatus models 430 and 440.
This instrument is dedicated for temperatures and pressures measurements
and it is equipped with a 24-keys keyboard, LCD display, RS232C output.
It is delivered with official COFRAC calibration certificate.
picture not mandatory
CN06-2uk
(all previous editions obsolete)
76
ASTM E 1
Thermometers
ASTM ref.
n°
range
°C
grad
°C
depth
mm
ASTM ref.
n°
range
°C
grad
°C
depth
mm
1C
2C
3C
5C
6C
7C
8C
9C
10C
11C
12C
13C
14C
15C
16C
17C
18C
19C
20C
21C
22C
23C
24C
25C
26C
27C
33C
34C
35C
36C
37C
38C
39C
40C
41C
42C
44C
45C
46C
47C
49C
52C
54C
56C
57C
61C
62C
63C
64C
65C
66C
67C
68C
69C
70C
71C
-20/+150
-5/+300
-5/+400
-38/+50
-80/+20
-2/+300
-2/+400
-7/+110
+90/+370
-6/+400
-20/+102
+155/+170
+38/+82
-2/+80
+30/+200
+19/+27
+34/+42
+49/+57
+57/+65
+79/+87
+95/+103
+18/+28
+39/+54
+95/+105
+130/+140
+147/+182
-38/+42
+25/+105
+90/+170
-2/+68
-2/+52
+24/+78
+48/+102
+72/+126
+98/+152
+95/+255
+18.5/+21.5
+23.6/+26.1
+48.6/+51.4
+58.6/+61.5
+20/+70
-10/+5
+20/+100
+19/+35
-20/+50
+32/+127
-38/+2
-8/+32
+25/+55
+50/+80
+75/+105
+95/+155
+145/+205
+195/+305
+295/+405
-37/+21
1
1
1
1
1
1
1
0.5
2
2
0.2
0.5
0.1
0.2
0.5
0.1
0.1
0.1
0.1
0.1
0.1
0.2
0.2
0.2
0.1
0.5
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.5
0.05
0.05
0.05
0.05
0.2
0.1
0.2
0.02
0.5
0.2
0.1
0.1
0.1
0.1
0.1
0.2
0.2
0.5
0.5
0.5
76
76
76
108
76
total
total
57
57
25
total
total
79
total
total
total
total
total
total
total
total
90
90
90
total
76
50
50
51
45
100
100
100
100
100
100
total
total
total
total
65
total
total
total
57
79
total
total
total
total
total
total
total
total
total
76
82C
83C
84C
85C
86C
87C
88C
89C
90C
91C
92C
93C
94C
95C
96C
99C
100C
101C
102C
103C
104C
105C
106C
107C
110C
111C
112C
113C
114C
116C
117C
118C
119C
120C
121C
122C
123C
124C
125C
127C
-15/+105
+15/+70
+25/+80
+40/+150
+95/+175
+150/+205
+10/+200
-20/+10
0/+30
+20/+50
+40/+70
+60/+90
+80/+110
+100/+130
+130/+150
-40/+4
+145/+205
+195/+305
+123/+177
+148/+202
+173/+227
+198/+252
+223/+277
+248/+302
+133.6/+136.4
+170/+250
+4/+6
-1/+20
-80/+20
+18.9/+25.1
+23.9/+30.1
+28.6/+31.4
-38.3/-30
+38.5/+41.5
+98.5/+101.5
-45/-35
-35/-25
-25/-15
-15/-5
-21.4/-18.6
1
1
1
1
1
1
1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.2
0.2
0.5
0.2
0.2
0.2
0.2
0.2
0.2
0.05
0.2
0.02
0.5
0.5
0.01
0.01
0.05
0.1
0.05
0.05
0.1
0.1
0.1
0.1
0.05
30
40
249
181
35
40
57
76
76
76
76
76
76
76
76
35
76
76
100
100
100
100
100
100
total
100
total
total
total
total
total
total
100
total
total
total
total
total
total
total
11489
11490
11491
11492
11493
11494
11495
11496
11497
11498
11499
11500
11501
11502
11503
11504
11505
11506
11507
11508
11509
11510
11511
11512
11513
11514
11515
11516
11517
11518
11519
11520
11521
11522
11523
11524
15629
15630
15631
15632
11525
11526
20218
11528
11529
11530
11531
11532
11533
11534
11535
11536
11537
11538
11539
20219
15165
11540
11541
11542
11543
11544
11545
11546
11547
11548
11549
11550
11551
11552
11553
11554
15164
11555
11556
11557
11558
11559
11560
11561
11562
15634
11563
11564
11565
11566
20220
20221
15635
20222
10025
10026
29020
29021
29022
29023
22082
Sleeve for ASTM 99C thermometer
THERMOMETERS IN °F : ON REQUEST
See overleaf
CN06-2uk
(all previous editions obsolete)
77
IP Thermometers
IP
n°
ref.
range
°C
grad
°C
depth
mm
2C
3C
8C
9C
15C
18C
22C
30C
39C
42C
44C
71C
81C
91C
98C
21229
21049
521367
521369
25960
21826
25961
21651
21675
11337
21915
21650
25959
23184
23185
-80/+20
-1/+105
0/+45
+40/+85
-5/+110
+20/+100.6
+195/+205
+23.6/+26.4
-1/+38
-38/+30
+15/+30
-27.4/-24.6
+98/+152
0/+110
+100/+300
1
0.5
0.2
0.2
0.5
0.2
0.1
0.05
0.1
0.5
0.2
0.05
0.2
1
2
108
total
65
65
57
total
100
total
total
250
22
total
100
44
44
0.5
0.5
61
89
Special with collar
74C
9921227 -35/+70
75C
9921228 -30/+80
THERMOMETERS IN °F : ON REQUEST
Miscellaneous Thermometers
Ref.
Description
9410759
23190
9419124
15287
15288
15351
15352
26075
27251
27252
60135
60136
Thermometer for grease worker
Thermometer with certificate +40/+260°C
Thermometer ISO 653
Thermometer AFNOR -15/+45°C
Thermometer AFNOR +35/+85°C
Thermometer 75F for ASTM D1177 -35/+35°F
Thermometer 76F for ASTM D1177 -65/+5°F
Mercury thermometer for calibration
Engler with ring +10/+55°C in 0.5°C
Engler with ring +10/+110°C in 1°C
Modified thermometer 120C for NVH 450
Modified thermometer 121C for NVH 450
CN06-2uk
(all previous editions obsolete)
78
STANDARD
REF.
MODEL
DESCRIPTION
PAGE
ASTM D113
9418641
P 864
Ductility meter (100 cm)
13
ASTM D113
9418642
P 864A
Ductility meter (150 cm)
13
ASTM D1142
941975
P 975
Dew-point tester 3 to 15 psi
38
ASTM D1142
9419751
P 975A
Dew-point tester 0 to 350 psi
38
ASTM D1160
9411280
P 1280
Distillation at reduced pressure (1 to 50 mmHg)
38
ASTM D1177
9411520
P 1520
Freezing point
39
ASTM D1265
941501
Stainless steel sampling vessel (500 cc)
40
ASTM D1265
9411001
Stainless steel sampling vessel (1000 cc)
40
ASTM D1265
9412251
Stainless steel sampling vessel (2250 cc)
40
ASTM D1265
9414541
Stainless steel sampling vessel (1gallon)
40
ASTM D1266
941454
P 454
Sulphur determination in petroleum (6-unit)
41
ASTM D1267
941432
P 432
Vapour pressure of LPG
42
ASTM D1319
941600
Adsorption apparatus 4 places
43
ASTM D1322
941680
P 680
Smoke point apparatus
44
ASTM D1401
941545
P 545
Semi-auto tester for demulsibility of oils
44
ASTM D1401
941550
P 550
Automated demulsibility tester
44
ASTM D1500
24415
Colorimeter with colour disc
46
ASTM D1552
941450
P 450
Tube furnace for sulphur determination
46
ASTM D156
941520
P 520L
Saybolt chromometer
15
ASTM D156
941521
Saybolt chromometer for waxes
15
ASTM D1655
27235
Engler vicometer
47
ASTM D1657
941911
Tester for specific gravity of LPG
47
ASTM D1657
9419110
Same apparatus with burst disc
47
ASTM D1742
941778
P 778
Oil separation from grease during storage
48
ASTM D1754
941876
P 876
Effect of heat and air on asphaltic material
49
ASTM D1831
941744
P 744-2B
Roll stability Tester
49
ASTM D1837
941940
P 940
Tester for Volatility of LPG
50
ASTM D1838
941432
P 432
Copper strip corrosion by LPG
50
ASTM D189
941653
P 653
Conradson carbon residue apparatus
16
ASTM D2001
19398
Depentanization apparatus
50
51
P 911
ASTM D2002
19399
Complete absorption column (method B)
ASTM D2003
19400
High efficiency column
51
ASTM D2068
41800
Automatic FBT tester
51
ASTM D2068
41801
NBF 240
Complete bench top model with printer
51
ASTM D2112
9416298
P 629H
Oil thermostatic bath for 2 vessels
52
ASTM D2158
941957
P 957
Tester for determination of extraenous materials
52
ASTM D2386
941556
P 556
Complete freezing point apparatus
54
ASTM D2420
941958
P 958
Hydrogen sulfide in liquefied petroleum gases
55
ASTM D2440
941650
P 650
Oxidation tester for lubricating oils (12 test)
55
ASTM D2619
941995
P 995
Tester for hydrolytic stability of fluids
57
ASTM D2624
23628
P 981
Portable Conductivity meter
57
ASTM D2784
24516
Wickbold Tester for sulphur content
59
ASTM D287
14854
6-unit ramp in stainless steel
17
ASTM D2872
941877
P 877
Complete RFTOT oven
59
ASTM D323
941432
P 432
Constant temperature water bath (3 test)
18
ASTM D3230
941287
P 287
Salt in crude oil tester
60
ASTM D3427
941688
P 688
Impinger test rig
61
ASTM D36
40100
NBA 440
Automatic softening point tester (NBA 440)
4
NBF 241
ASTM D36
20761
ASTM D381
941302
P 302
ASTM D381
941303
P 303
Air/steam jet apparatus for determination of gums
19
ASTM D4057
22213
Brass weighted bottle (neck 19mm)
63
ASTM D4057
22214
Brass weighted bottle (neck 38mm)
63
ASTM D4057
519032
Sampling thief (vessel type)
63
ASTM D445
60100
Houillon Vicometer
20
CN06-2uk
NVH 450
Ring and ball apparatus (shouldered ring)
4
Air jet apparatus for determination of gums
19
(all previous editions obsolete)
79
STANDARD
REF.
ASTM D445
MODEL
DESCRIPTION UK
PAGE
18450
Automatic washer for viscometer
21
ASTM D445
17915
Kinematic viscosity bath “Routine” (20 liters)
21
ASTM D445
23829
Kinematic viscosity bath “Routine” (20 liters)
21
ASTM D445
941131
P 131
Kinematic viscosity bath “Precision” (8 visco,)
21
ASTM D4530
41023
NMC 440
Automatic micro carbon residue tester
64
ASTM D4530
941670
NMC 210
Automatic micro conradson
64
ASTM D473
941281
P 281
Extraction apparatus complete
26
ASTM D482
23963
Muffle furnace for ash determination
27
Constant temperature water bath (max 100°C)
2
ASTM D5
27794
ASTM D5
941731
P 731
Manual penetrometer
2
ASTM D5
941734
P 734
Automatic penetrometer
2
ASTM D5
9417582
P 758-2
Automatic grease working machine (twin unit)
2
ASTM D524
941671
P 671
Ramsbottom carbon residue tester (5 test)
27
ASTM D525
40900
Automatic 2-unit tester with liquid bath
28
ASTM D525
40925
Automatic 4-unit tester with metallic bath (NPI 911)
28
ASTM D525
941372
4-place water bath
28
P 372
ASTM D56
40600
NTA 440
Automatic TAG flash point tester
5
ASTM D5800
941783
P 783
Noack tester with glassware
66
ASTM D6
941875
P 875
ASTM D6082
9416432
ASTM D611
41100
ASTM D611
40500
ASTM D613
52000
Cetane blender 2 tanks
30
ASTM D613
52100
Octane blender 3 tanks
30
ASTM D613
52200
Cetane + octane blender (2 cetane + 3 octane)
30
ASTM D613
52300
Cetane + octane blender (2 cetane + 4 octane)
30
ASTM D6371
20878
Manual cold filter plugging point tester
67
ASTM D6371
51052
NTL 452
Automatic cold filter plugging point
67
ASTM D664
941708
P 708
Neutralisation number apparatus
31
ASTM D665
9416306
P 630
Rust-preventing characteristics (6 unit)
31
ASTM D70
24615
Thermostatic bath
5
ASTM D721
941795
P 795
Oil content of petroleum waxes
32
ASTM D86
40000
NDI 440
Automatic D86 distillation unit
7
ASTM D86
941227
P 227
Distillation “Front view” (receiver on left)
6
ASTM D86
941228
P 228
Distillation “Front view” (receiver on right)
6
ASTM D86
942228
NDI 210
Semi-automatic Distillation (receiver on right)
6
ASTM D877
23797
Analyseur for dielectric breakdown voltage
33
ASTM D877
27196
Portable tester for routine analysis
33
ASTM D88
27238
Saybolt Viscometer
8
ASTM D892
941640
P 640
Foaming test apparatus (1 bath)
34
ASTM D892
941643
P 643
Foaming test apparatus (2 bath)
34
Loss on heating
3
Foam test bath at 150°C
34
NPA 410
Automatic aniline point tester
29
NAE 440
Automatic aniline point tester
29
ASTM D892
9416431
Automatic time sequencer
34
ASTM D91
29038
Centrifuge with rotor (without heating)
8
ASTM D91
29039
Centrifuge with rotor (with heating 60°C)
8
ASTM D92
40400
NCL 440
Automatic cleveland flash point tester
9
ASTM D92
942611
NCL 120
Manual cleveland open cup tester
9
ASTM D92
942610
NCL 220
Semi-automatic Cleveland flash point tester
9
ASTM D93
40300
NPM 440
Automatic P-M flash point tester
11
ASTM D93
942614/15 NPM 120
Manual P-M flash point tester
10
ASTM D93
942616
Manual P-M flash point tester
10
ASTM D93
942617/18 NPM 220
Semi-automatic P-M flash point tester
10
NPM 121
ASTM D93
942619
NPM 221
Semi-automatic P-M flash point tester
10
ASTM D942
941769
P 796
2-place bath without accessory
35
ASTM D942
941770
P 770
ASTM D943
9416260
CN06-2uk
4-place bath without accessory
35
Tester for oxidation stability test (no flowmeter)
36
(all previous editions obsolete)
80
STANDARD
REF.
ASTM D95
21454
MODEL
DESCRIPTION UK
PAGE
Complete apparatus with electric heater
11
ASTM D97
941584
P 584
Manual cloud and pour point apparatus (5-unit)
12
ASTM D97
941592
P 592
Manual cloud and pour test cabinet (4 test)
12
ASTM D97
941595
P 595
Manual cloud and pour test cabinet 1 post -69°C
12
ASTM D972
941771
P 771
Evaporation cell for grease
37
ASTM D972
941772
P 772
Evaporation cell for oil
37
IP 143
10479
Complete glassware (manual version)
70
IP 143
24472
Semi-automatic Asphan 02 extractor
70
IP 170
41300
NAB 440
Automatic Abel flash point
71
IP 170
941601
NAB 110
Manual Abel Flash Point Tester
71
IP 59
941960
P 960
Schilling effusiometer
68
IP 70
27241
Redwood viscometer
68
IP 72
941826
P 826
BRTA viscometer (4-unit)
69
IP 80
29250
Fraas apparatus
69
ISO 3679
942690
NPV 220
Closed cup flash point tester
74
ISO 3679
942691
NPV 310
Closed cup flash point tester
74
UOP 357
941489
P 489
Trace of sulfur tester
75
EN 15323
941878
NRC 210
RCAT
75
CAL
41200
Calibration apparatus
76
CN06-2uk
(all previous editions obsolete)
81