DISHWASHER
USER INSTRUCTIONS
GNF 51030 W
ENG
www.grundig.com
DISHWASHER
USER INSTRUCTIONS
GNF 51030 W
ENG
Please read this user manual first!
Dear Customer,
Thank you for preferring a Grundig product. We hope that you get the best results
from your product which has been manufactured with high quality and state-of-the-art
technology. Therefore, please read this entire user manual and all other accompanying
documents carefully before using the product and keep it as a reference for future use.
If you handover the product to someone else, give the user manual as well. Follow all
warnings and information in the user manual.
Remember that this user manual is also applicable for several other models. Differences
between models will be identified in the manual.
Explanation of symbols
Throughout this User Manual the following symbols are used:
C
A
B
Important information or useful
hints about usage.
Warning for hazardous situations
with regard to life and property.
Warning for electric shock.
Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations.
Do not dispose of the packaging materials together with the domestic or other wastes.
Take them to the packaging material collection points designated by the local authorities.
CONTENTS
1 INSTRUCTIONS FOR SAFETY
AND ENVIRONMENT
4
General safety................................................ 4
Intended use.................................................... 4
Children’s safety............................................. 5
Disposing of packaging material.................. 5
Transportation of the product........................ 5
Compliance with WEEE Directive and
Disposing of the Waste Product.................... 6
Compliance with RoHS Directive.................. 6
Package information....................................... 6
2 DISHWASHER
7
3 INSTALLATION
9
Overview......................................................... 7
Fan drying system........................................... 8
Technical specifications.................................. 8
Appropriate installation location................... 9
Connecting water supply............................... 9
Connection to the drain................................. 9
WaterProtect+ . ............................................10
Adjusting the feet..........................................10
Electrical connection....................................10
This appliance must be earthed.................. 11
Fitting a different plug.................................. 11
Initial use........................................................ 11
4 PREPARATION
12
Tips for energy saving.................................. 12
Water softening system................................ 12
Adjusting the water softening system.......... 12
Adding salt.................................................... 14
Detergent....................................................... 15
Adding detergent.......................................... 15
Combined tablet detergents........................ 16
Rinse aid........................................................ 17
Items not suitable for washing in the
dishwasher.................................................... 18
Placing the dishes into the dishwasher....... 18
Cutlery basket ..............................................20
Adjusting the height of the upper basket....20
Collapsible upper basket tines.................... 21
Upper basket height adjustable rack.......... 21
Collapsible lower basket tines.....................22
Tray Wash Supports.....................................22
Upper cutlery basket....................................23
5 OPERATING THE
PRODUCT
24
6 MAINTENANCE AND
CLEANING
35
7 TROUBLESHOOTING
39
8 GUARANTEE
44
Keys................................................................25
Preparing the machine.................................25
Programme selection....................................25
Auxiliary functions........................................27
SelfCare.........................................................27
Programming the washing time...................28
Starting the programme...............................28
Programme follow-up...................................29
Child (Key) Lock............................................29
Canceling a programme..............................30
Changing the auxiliary function..................30
Machine settings...........................................30
Warning messages.......................................33
End of programme........................................34
Cleaning the outer surface of the product.35
Cleaning the interior of the machine..........35
Cleaning the filters........................................35
Cleaning the hose filter................................36
Cleaning the impellers.................................37
Lower impeller...............................................37
Upper impeller..............................................37
Ceiling Impeller.............................................38
Guarantee Details........................................44
1 INSTRUCTIONS FOR SAFETY AND ENVIRONMENT
This section contains safety
instructions that will help to give
protection from risk of personal
injury or property damage. Failure
to follow these instructions shall
void all warranties.
General safety
•• Never place the product
on a carpet-covered floor;
otherwise, lack of airflow
beneath the product will cause
electrical parts to overheat.
This will cause problems with
your product.
•• Do not operate the product
if the power cable / plug is
damaged! Call the Authorised
Service Agent.
•• Connect the product to a
grounded outlet protected
by a fuse complying with
the values in the “Technical
specifications” table. Do
not neglect to have the
grounding installation made
by a qualified electrician.
Our company shall not be
liable for any damages that
will arise when the product
is used without grounding in
accordance with the local
regulations.
•• The water supply and
draining hoses must be
securely fastened and remain
undamaged.
•• Unplug the product when not
in use.
•• Never wash the product by
spreading or pouring water
onto it! There is the risk of
electric shock!
4 /48 EN
•• Never touch the plug with
wet hands! Never unplug by
pulling on the cable, always
pull out by grabbing the plug.
•• The product must be
unplugged during installation,
maintenance, cleaning and
repairing procedures.
•• Always have the repair
procedures carried out by the
Authorised Service Agent.
Manufacturer shall not be held
liable for damages that may
arise from procedures carried
out by unauthorised persons.
•• Never use chemical solvents in
the product. They bring forth
the risk of explosion.
•• When you pull the upper and
lower baskets out completely,
the door of the product will
bear all the weight of the
baskets. Do not put other
loads on the door; otherwise,
the product may tilt.
•• Never leave the door of the
product open apart from
loading and unloading
procedures.
•• Do not to open the door of
the product when it is running
unless necessary. Be careful
for the rush of hot steam when
you need to open the door.
Intended use
•• This product has been
designed for domestic use.
•• It must be used to do the
domestic type dishes only.
•• This appliance is intended
to be used in household and
similar applications such as:
DISHWASHER / USER INSTRUCTIONS
Instructions for safety and envIronment
- Staff kitchen areas in shops,
offices and other working
environments.
•• Only dishwasher safe
detergents, rinse aids and
additives must be used.
•• The manufacturer waives
any responsibility arisen
from incorrect usage or
transportation.
•• This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical,sensory
or mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Children
shall not play with the
appliance. Cleaning and
user maintenance shall not
be made by children without
supervision.
Children’s safety
•• Electrical products are
dangerous for the children.
Keep children away from the
product when it is in use. Do
not let them to tamper with the
product.
•• Do not forget to close the door
of the product when leaving
the room where it is located.
•• Store all detergents and
additives in a safe place away
from the reach of the children.
DISHWASHER / USER INSTRUCTIONS
Disposing of packaging
material
Packaging materials are
dangerous to children. Keep
packaging materials in a safe
place away from reach of the
children.
Packaging materials of the product
are manufactured from recyclable
materials. Dispose of them
properly and sort in accordance
with recycled waste instructions.
Do not dispose of them with
normal domestic waste.
Transportation of the
product
A
If you need to move the
product, do it in upright
position and hold from
the rear side. Tilting the
product onto its front side
may cause the electronic
parts in it get wet and
damaged.
1. Unplug the product before
transporting it.
2. Remove water drainage and
water supply connections.
3. Drain the remaining water in
the product completely.
5 / 48 EN
Instructions for safety and envIronment
Compliance with WEEE
Directive and Disposing of
the Waste Product
This product complies with
EU WEEE Directive
(2012/19/EU). This product
bears a classification symbol
for waste electrical and electronic
equipment (WEEE).This product
has been manufactured with high
quality parts and materials which
can be reused and are suitable for
recycling. Do not dispose of the
waste product with normal
domestic and other wastes at the
end of its service life. Take it to the
collection center for the recycling
of electrical and electronic
equipment. Please consult your
local authorities to learn about
these collection centers.
Compliance with RoHS
Directive
The product you have purchased
complies with EU RoHS Directive
(2011/65/EU). It does not
contain harmful and prohibited
materials specified in the Directive.
Package information
Packaging materials of the product
are manufactured from recyclable
materials in accordance with our
National Environment Regulations.
Do not dispose of the packaging
materials together with the
domestic or other wastes. Take
them to the packaging material
collection points designated by the
local authorities.
6 /48 EN
DISHWASHER / USER INSTRUCTIONS
2
DISHWASHER
Overview
16
DISHWASHER / USER INSTRUCTIONS
1. Upper basket
2. Upper impeller
3. Lower impeller
4. Silverware basket
5. Door
6. Rating Label
7. Control panel
8. Detergent dispenser
9. Lower basket
10. Filters
11. Salt reservoir lid
12. Upper basket rail
13. Upper cutlery basket
14. Tabletop (depends on model)
15. Ceiling impeller
16. Fan drying system (depends on model)
7 / 48 EN
Dishwasher
Technical specifications
Compliance to standards and test data / EC declaration of conformity
This product complies with the following EU directives;
Development, production and sales stages of this product comply with the safety
rules included in all pertaining European Community regulations.
2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242
Power input
220-240 V, 50 Hz (see rating label)
Total power consumption
1800-2100 W (see rating label)
Heater power consumption
1800 W (see rating label)
Total current (depends on the model)
10 A (see rating label)
Drain pump power consumption
30 W (see rating label)
Water pressure
0.3 –10 bar (= 3 – 100 N/cm² = 0.01-1.0
Mpa)
C
C
C
Technical specifications may be changed without prior notice to improve the
quality of the product.
Figures in this manual are schematic and may not match the product exactly.
Values stated on the markings of the product or in the printed documents
accompanying the product are obtained in the laboratory on basis of the relevant
standards. Depending on operational and environmental conditions of the
product, these values may vary.
Fan drying system
Fan drying system ensures efficient drying of your dishes.
It is normal to hear a different sound than that of washing cycle during fan operation.
Note for test institutions:
Data required for performance tests shall be provided upon request. Requests can be
e-mailed to the following address:
dishwasher@standardloading.com
Do not forget to provide the code, stock and serial numbers of the product to be tested in your
request e-mail along with your contact information. Code, stock and serial numbers of the
product may be found on the type label attached to the side wall of the door.
8 /48 EN
DISHWASHER / USER INSTRUCTIONS
3 INSTALLATION
To make the product ready for use, make
sure that the electricity, tap water supply and
water drainage systems are appropriate
before calling the Authorised Service Agent.
If they are not, call a qualified technician
and plumber to have any necessary
arrangements carried out.
Preparation of the location and
electrical, tap water and waste
water installations at the place
of installation is under customer's
responsibility.
C
B
A
C
Manufacturer shall not be held
responsible for damages arising
from processes carried out by
unauthorised persons.
Prior to installation, visually
check if the product has any
defects on it. If so, do not have
it installed. Damaged products
cause risks for your safety.
Make sure that the water inlet
and discharge hoses are not
folded, pinched or crushed
while pushing the product into
its place after installation or
cleaning procedures.
When placing the product, pay attention not
to damage the floor, walls, piping, etc. Do
not hold the product from its door or panel
to move it.
Appropriate installation
location
••
••
Place the product on a solid and flat
floor that has sufficient load carrying
capacity! The product must be installed
on a flat surface in order for the door to
be closed comfortably and securely.
Do not install the product at places
where temperature may fall below 0ºC.
DISHWASHER / USER INSTRUCTIONS
••
Place the product on a rigid floor. Do
not place it on a long pile rug or similar
surfaces.
B
••
••
Ensure the power cable does not
get trapped under the product.
Make sure that you select a location
that will allow you to load and unload
the dishes in a fast and comfortable
manner.
Install the product in a place close
to the tap and the drain. Select the
installation location by considering
that it will not be changed after the
connections are made.
Connecting water supply
••
••
••
Do not use old or used water inlet hose
on the new product. Use the new water
inlet hose supplied with the product.
Connect the water inlet hose directly
to the cold water tap. Permitted water
temperature up to 25°C. Pressure
coming from the tap should be minimum
0.3 and maximum 10 bars. If the water
pressure exceeds 10 bars, a pressure
relief valve should be installed in
between.
Open the tap completely after making
the connections to check for water
leaks.
For your safety, close the water
inlet tap completely after the
washing programme is over.
A
Connection to the drain
Water discharge hose can directly be
connected to the drain hole or sink’s
drainage. The length of this connection
must be min. 50 cm and max. 100 cm from
the floor. A discharge hose longer than 4
meters will cause washing performance to
be affected.Attach the water discharge hose
9 / 48 EN
Installation
to the drainpipe without bending it. Tightly
fix the water discharge hose to the drainpipe
in order to prevent any dislocation of the
water discharge hose during operation of
the product.
WaterProtect+
The WaterProtect+ system protects against
water leaks that may occur at the hose inlet.
Water contact with the valve box of the
system must be avoided to prevent damage
to the electrical system. If the WaterProtect+
system is damaged, unplug the product and
call the Authorised Service Agent.
As the hose set contains
electrical connections and
assemblies, never shorten or
lengthen the hose with extension
hoses.
C
min
120
min
300
min 500
max 1000
A
Drainpipe must be connected
to the foul water system and it
should not be connected to any
surface water drain.
Adjusting the feet
Electrical connection
If the door of the product cannot be closed
properly or if the product wobbles when
you push it slightly, then you need to adjust
the feet of the product. Adjust the feet of the
product as illustrated in the relevant section.
Before you insert the plug into the wall
socket make sure that the voltage and
the frequency shown in the rating label
corresponds to your electricity supply.
We recommend that this appliance be
connected to the mains supply via a suitable
switched and fused socket in a readily
accessible position.
If the supply cord or the mains lead is
damaged please do not replace it yourself.
The supply cord or the mains lead must be
replaced by a Authorised Service Agent or a
similarly qualified person.
10 /48 EN
DISHWASHER / USER INSTRUCTIONS
Installation
A
This appliance must be
earthed
If the fitted moulded plug is not
suitable for your socket, then the
plug should be cut off and an
appropriate plug fitted.
Destroy the old plug, which is cut
off as a plug with a bared cord
could cause a shock hazard if
inserted into a socket elsewhere
in the house.
The moulded plug on this
appliance incorporates a 13A
fuse. Should the fuse need to
be replaced an ASTA approved
BS1362 fuse of the same rating
must be used. Do not forget to
refit the fuse cover. In the event
of losing the fuse cover, the
plug must not be used until a
replacement fuse cover has been
fitted. Colour of the replacement
fuse cover must be the same
colour as that visible on the pin
face of the plug. Fuse covers
are available from any good
electrical store.
Fitting a different plug
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals on your plug, proceed as follows:
1. Connect the green - yellow or green
(earth) wire to the terminal in the plug
marked ‘E’ or with the symbol
or
coloured green and yellow or green.
2. Connect the blue (neutral) wire to the
terminal in the plug marked ‘N’ or
coloured black.
3. Connect the brown (live) wire to the
DISHWASHER / USER INSTRUCTIONS
terminal in the plug marked ‘L’ or
coloured red.
With the alternative plugs a 13A fuse must
be fitted either in the plug or adaptor or
in the main fuse box. If in doubt contact a
qualified electrician.
Initial use
Before starting to use the product, make
sure that all preparations are made
in accordance with the instructions in
sections “Important safety instructions” and
“Installation”.
•• Before using the product, fill the salt
reservoir with 1 litre of water, add salt
(see next page) and stir to dissolve.
Run the Dishwasher without dishes on a
short programme with a small amount
of detergent.
There might be a small amount
of water left in the product after
factory quality control tests. This
causes no harm to the product.
A
11/48 EN
4
PREPARATION
Tips for energy saving
Following information will help you use the
product in an ecological and energy-efficient
manner.
Wipe away any coarse food remnants on
the dishes before putting them in the product.
Operate the product after filling it
completely.
When selecting a programme, consider
the table of "Programme data and average
consumption values".
Do not put more detergent than suggested
on the detergent package.
Adjusting the water softening
system
Cleaning, rinsing and drying performance
of your dishwasher will increase when water
softening system is adjusted properly.
Adjust the new water hardness level
according to the Water hardness level
instruction in this booklet.
Use the test strip supplied with the product
according to the steps given below to
determine hardness level of your supply
water.
Water softening system
C
Your dishwasher requires soft
water. If the hardness of the
water is above 6°dH, the water
must be softened and descaled.
Otherwise, ions that create the
hardness will accumulate on the
surfaces of the dishes and may
adversely affect the washing,
shining and drying performances
of the product.
The product is equipped with a water
softening system which reduces the hardness
of incoming water. This system softens the
supply water that enters into the product to a
level that will allow washing the dishes with
the required quality.
12 /48 EN
DISHWASHER / USER INSTRUCTIONS
Preparation
a
b
c
.min 1
d
e
f
Second 1
Minute 1
Remove the test
strip from the
.packet
Turn on the tap and Hold the test strip in Remove the test
let the water run for the water for about strip from the water
.about a minute
.a second
.and shake it
.Wait for 1 minute
The test strip shows
you the hardness
.level
After determining hardness level of the supply water:
1. Press On/Off key to turn on the machine.
2. Enter the Settings Menu by pressing the Function button d for 3 seconds.
3. By using function button b, adjust water hardness level according to the hardness of the
supply water.
See “Water hardness level adjustment table” for correct setting.
4. Exit the Settings Menu by pressing the function button d for 3 seconds.
Water Hardness Level Adjustment Table
Hardness
Level
English Water
Hardness °dE
German Water French Water
Hardness °dH Hardness °dF
0th Level
0-5
0-4
0-8
1st Level
6-9
5-7
9-13
2nd Level
10-15
8-12
14-22
3rd Level
16-19
13-15
23-27
4th Level
20-24
16-19
28-34
5th Level
25-62
20-50
35-90
Water Hardness Level Indicator
Press the function button b to set the
.water hardness level to position 1
Press the function button b to set the
.water hardness level to position 2
Press the function button b to set the
.water hardness level to position 3
Press the function button b to set the
.water hardness level to position 4
Press the function button b to set the
.water hardness level to position 5
Water Hardness: 1
Water Hardness: 2
Water Hardness: 3
Water Hardness: 4
Water Hardness: 5
If the hardness level of the supply water is above 90°dF or if you are using well water, then it
is recommended to use water purification devices and special filters.
Since your machine is equipped with an Automatic Water Hardness Detection System,
appropriate salt should be put in the dishwasher when “Salt indicator” illuminates.
If salt is not put in the machine, the Automatic Water Hardness Detection System will not work
properly.
DISHWASHER / USER INSTRUCTIONS
13/48 EN
Preparation
C
If your machine is equipped with
“Automatic Water Hardness
Detection System”, water
hardness adjustment will be
made by the service/user as
standard during first installation.
If you move your house, your
machine will automatically
perform water hardness level
adjustment according to the
water hardness in the new place
you have moved in.
Adding salt
Water softening system needs to be
regenerated in order for the product
operates with the same performance
continuously. Dishwasher salt is used for this
purpose.
Use only special softening salts
produced particularly for the
dishwashers in your machine.
C
C
C
We recommend using granular
or powder softening salts. Do
not use salts that are insoluble
in water such as table salt or
common salt. Performance of
water softening system may get
worse in time.
Before initial use, fill the water
softening system with 1 litre of
water (C).
Salt reservoir will fill with water
when you start the product.
Therefore, add the softening salt
before starting the machine.
1. First take the lower basket out to add
softening salt.
2. Turn the salt reservoir lid in counter
clockwise to open it (A, B).
14 /48 EN
C
C
Salt reservoir will fill with water
when you start the product.
Therefore, add the softening salt
before starting the machine.
3. Fill the salt reservoir with salt by using
salt funnel (D). To speed up dissolution
rate of salt in water, stir it with a spoon.
DISHWASHER / USER INSTRUCTIONS
Preparation
A
C
You can put about 2 kg of
softening salt into the salt
reservoir.
4. Replace the lid and tighten it securely
when the reservoir is full.
5. If you will not start a washing
programme immediately after adding
the salt, run the machine empty in the
shortest programme to dissolve and
wash away the scattered salt in the
machine.
C
Since different salt brands in the
market have different particle
sizes and since the water
hardness may vary, dissolution
of the salt in water may take
a couple of hours. Therefore,
Salt Indicator remains on for a
while after adding salt into the
machine.
Only use in the detergents
produced particularly for
use with dishwashers. Never
use washing up liquids. We
recommend you not to use
detergents that contain chlorine
and phosphate as they are
harmful for the environment.
Adding detergent
C
C
A
You can find the correct amount
of detergent for the selected
programme in the table of
"Programme data and average
consumption values".
In order to have good washing
and drying results, always follow
the instructions on the detergent
packaging. If you have further
questions, we recommend to
contact with the producer of the
detergent.
Do not put solvents into the
detergent dispenser. There is the
risk of explosion!
Put the detergent into the detergent dispenser
just before operating the machine as
illustrated below.
1. Press the latch in the direction of arrow
to open the detergent dispenser lid (A).
Detergent
You can use powder, liquid/gel and tablet
detergents in the machine.
DISHWASHER / USER INSTRUCTIONS
15/48 EN
Preparation
2. Put suggested amount of powder, liquid/
gel or tablet detergent in the dispenser.
C
A
C
16 /48 EN
Excessive usage of powder
detergents will cause the
detergent not dissolve
completely and will also cause
scratches on the glassware.
Combined tablet detergents
Inside the detergent dispenser
there are level markings that help
you use appropriate amount
of powder detergent. When
brimful, detergent dispenser will
contain 40 cm³ of detergent. Fill
detergent up to 15 cm3 or 25
cm3 level marks in the detergent
dispenser according to fullness
of the machine and/or soiling
degree of the dishes.
3. Close the detergent dispenser lid by
pressing on it lightly. A "click" will be
heard when the lid is closed.
C
Use powder detergent in short
programmes without prewash
since the solubility of the tablet
detergent changes depending on
the temperature and time.
In programmes with pre-washing
and high temperature, in which
you may use tablet detergents,
make sure that the detergent
dispenser lid is closed firmly.
Combined tablet detergents exhibit water
softening and / or rinse aid effect in addition
to detergent effect. Some types of these
detergents also contain special-purpose
washing chemicals such as glass and
stainless steel protectors.
The best washing performance in
dishwashers is obtained by using
detergent, rinse aid and water
softening salt individually.
C
Combined tablet detergents are available
as 3in1, 5in1, Allin1 etc. They function only
up to a specific degree of water hardness.
Above this limit regeneration salt and rinse
aid must be added. Refer to the instructions
on the packaging of the combined detergent
whether it is suitable for the hardness level of
the water supply.
While using combined tablet
detergents, contact with the
detergent producers if your
dishes are wet and/or if
you notice limescale spots
particularly on your glasses after
the washing programme is over.
C
DISHWASHER / USER INSTRUCTIONS
Preparation
When you switch to powder, liquid/
gel or tablet detergent from a
combined tablet detergent:
1. Make sure that salt and rinse aid
reservoirs are full.
2. Set the water hardness to the highest
level and perform an empty run.
3. After the empty washing cycle, review
the user manual and readjust the water
hardness level so as to suit the water
supply.
4. Make the appropriate rinse aid settings.
C
Depending on the model, salt
indicator and/or rinse aid
indicator should be enabled
again if they are disabled
before.
Rinse aid
C
2. Fill the reservoir until “MAX” level.
3. Turn the rinse aid amount adjuster
manually to a position between 1 and
6 (C). If there are stains on tableware
items after washing, level must be
increased and if there is a blue trace
after wiping them by hand, it must be
decreased. This is set to position 4 as
factory default.
The rinse aid used in dishwashers
is a special combination
that aims to increase drying
efficiency and prevent water
or lime stains on the washed
items. For this reason, care must
be paid to have rinse aid in the
rinse aid reservoir and to use
rinse aids produced specially for
dishwashers only.
Please check the rinse aid indicator on the
display to see whether there is adequate
amount of rinse aid in the dishwasher or
not. You need to refill the rinse aid reservoir
with rinse aid whenever rinse aid warning
indicator appears on the display of your
machine.
1. Open the lid of the rinse aid reservoir by
pulling the latch in the direction of the
arrow (B).
DISHWASHER / USER INSTRUCTIONS
4. Close the lid of the reservoir by pressing
on it lightly.
C
After making sure that the lid is
closed, wipe clean any spilled
rinse aid outside the reservoir.
Rinse aid that spilled accidentally
will cause foaming and it will
eventually decrease washing
performance.
17/48 EN
Preparation
Items not suitable for washing
in the dishwasher
••
••
••
Never wash dishes soiled by cigarette
ash, candle remnants, polish, dyestuff,
chemicals, etc. in your dishwasher.
Do not wash iron alloy items in the
dishwasher. It can get corroded or
leave stains on other items.
Do not wash silverware and cutlery
with wooden or bone stems, glued
pieces, or pieces that are not resistant
to heat, as well as copper and tinplated containers in the dishwasher.
Decorative prints of chinaware
as well as aluminum and silver
items may get discoloured or
tarnished after washing in the
dishwasher just as it happens
in handwashing as well. Some
delicate glass types and crystals
may become dull in time. We
strongly recommend you to
check if the tableware you are
going to purchase is suitable
for washing especially in the
dishwasher.
C
••
and smaller, delicate and light items in
the upper basket.
Place the hollowed dishes such as
bowls, glasses and pans upside down
in the dishwasher. Thus, accumulation
of water in deep hollows is prevented.
To prevent possible injuries,
always place the sharp and
pointed dishes such as service
fork, bread knife, etc. upside
down so as their pointed ends
will face down or they will lie
horizontally in the dish basket.
A
Unload dishes in the lower basket first and
then the dishes in the upper basket.
Placing the dishes into the
dishwasher
You can use your dishwasher in the optimum
way with respect to energy consumption and
washing and drying performance only if you
place the dishes in an orderly way.
•• Wipe away any coarse food remnants
(bones, seeds, etc.) on the dishes
before placing them in the dishwasher.
•• Place thin, narrow pieces in the middle
sections of baskets if possible.
•• There are two separate baskets in
which you can place your dishes in the
dishwasher. Place the heavily soiled
and bigger items in the lower basket
18 /48 EN
DISHWASHER / USER INSTRUCTIONS
Preparation
Suggestions for loading the dishwasher
Improper Loading Of Dishware
Lower basket
Upper basket
Improper Loading Of Dishware
DISHWASHER / USER INSTRUCTIONS
19/48 EN
Preparation
Cutlery basket
Cutlery basket is designed to wash your
dishes such as knife, fork, spoon, etc. in an
efficient manner.
Since the cutlery basket can be moved (A,
B), you can create more space while placing
your dishes in the lower basket and free up
space for your dishes of different sizes.
Grab one of the upper basket wires (right or
left) and lift it up (A).
Repeat the same process to raise the other
side of the basket.
Make sure that both sides of the loaded
basket height adjustment mechanism are at
the same level (down or up).
To lower the basket:
Press the latch on the loaded basket
adjustment mechanism (right and left) to
lower the basket (B).
Adjusting the height of the
upper basket
Basket adjustment mechanism on the loaded
upper basket of the machine is designed to
allow you create taller areas in the upper or
lower section of the machine based on your
requirements by adjusting the height of the
loaded basket in up or down directions.
To raise the basket:
20 /48 EN
Repeat the same process to lower the other
side of the basket.
Make sure that both sides of the loaded
basket height adjustment mechanism are at
the same level (down or up).
DISHWASHER / USER INSTRUCTIONS
Preparation
Collapsible upper basket tines
There are foldable tines on the upper basket
of the machine that you can lay down when
you need larger space for big dishes. On
your upper basket there are two types of
laying tines namely, fully laid system (A)
and gradually laid system (B). To bring the
foldable tines into horizontal position, push
the tines in the direction of the arrow by
holding from the middle. Place your larger
dishes into the area created. To bring the
tines back to vertical position, just lift them
up. Foldable tines will then snap in the latch
again.
C
Upper basket height
adjustable rack
Use the lower and upper parts of the height
adjustable racks in the upper basket of
the machine by sliding them down or up
according to the heights of the glasses, cups
or etc. (A, B, C).
Holding the tines from ends to
put them in lying position may
cause the tines to bend. For this
reason, it will be appropriate
to hold the tines in the middle
from their bottoms and to push in
the direction of the arrow to lay
down or bring them to vertical
position.
DISHWASHER / USER INSTRUCTIONS
21/48 EN
Preparation
Collapsible lower basket tines
There are foldable tines (A) located at the
lower basket of the machine are designed
for an easier placement of large pieces such
as pans, bowls, etc. You can create larger
spaces by folding each tines individually or
all of them at once.
C
Bringing the tines to the
horizontal position by holding
them from the tips may cause
them to bend. Therefore, it will
be appropriate to bring the tines
in the middle to horizontal or
vertical position by holding them
from their stems and pushing in
the direction of arrow.
Tray Wash Supports
Use the supports to wash trays in the bottom
basket.
See the Auxiliary functions section for
appropriate programme and function
selection.
To bring the collapsible tines into horizontal
position, grab the tines from mid position and
push them in the directions of arrows (B). To
bring the tines back to vertical position, just
lift them up. Collapsible tines will click into
the latch again (C).
22 /48 EN
DISHWASHER / USER INSTRUCTIONS
Preparation
Upper cutlery basket
The upper cutlery basket is designed for
small dishes, or long items that cannot fit into
the lower cutlery basket.
After taking out the basket by lifting it up,
remove the carrier part from the rails by
pulling it towards yourself (C).
Thanks to the easy take-out-from-the-machine
feature, it allows taking out the dishes from
the machine together with the basket after
they are washed (A). Since it can fit into all
standard size drawers, it does not require the
dishes to be removed from the basket and
placed into the kitchen drawers or shelves.
Replace the rail lids and push them back
to seat them into their places. Turn the rails
inside the machine sideways to seat them
properly in their places (D).
If you don’t want to use the upper cutlery
basket, pull it back to yourself to remove it
from the machine, rotate the rail lids towards
outside and pull them towards yourself to
take them out (B).
DISHWASHER / USER INSTRUCTIONS
In order to replace the upper cutlery basket
into its place again, repeat the same process
in reverse order.
23/48 EN
5 OPERATING THE PRODUCT
1.
2.
3.
4.
5.
6.
7.
8.
On / Off key
Programme Selection keys
Function keys
a) Tablet detergent function
b) Express Function
c) Child Lock / Steam Shine Function
d) Settings Menu / TrayMasterFunction
Time Delay key
Start / Pause / Cancel key
Display
Programme indicator
Rinse Aid ( ) / Salt ( ) / Water Cut-off (
) Warning indicators
9. Display Information line
10. Function Selected indicator
11. Function Selectable indicator
12. Child Lock indicator
13. Time Delay indicator
14. Start ( )/ Pause ( ) indicator
24 /48 EN
DISHWASHER / USER INSTRUCTIONS
Operating the product
Keys
On / Off key
It is used to turn on or off the machine.
Press the On / Off key for 1 second to turn
on. Buzzer will go off and machine will turn
on at the end of 1 second. Press the On /
Off key for 1 second to turn off. Buzzer will
go off and machine will turn off at the end of
1 second. When the On/Off key is pressed
while the programme is running, "Switching
off 3", "Switching off 2", "Switching off 1"
will be displayed on the display information
line and 3 seconds later the machine will
turn off with the end melody.
Machine will turn on with economy
programme in On mode and the number of
the economy programme will appear on the
programme indicator.
Start / Pause / Cancel key
It is used to start, pause or cancel the
selected programme or function.
Programme Selection keys
They are used to select the washing
programme you determined from the table of
"Programme data and average consumption
values". Use up arrow to switch to the next
programme, and down arrow to switch to
the previous one. It returns to beginning or to
end after the first and last programs.
Function keys
Using auxiliary functions enable you to save
time, water and energy and to perform a
more comfortable washing with conditions
specific to you.
Time Delay key
It should be pressed to make the time delay
settings.
4. Place the dishes in accordance with the
instructions in the user manual.
5. Make sure that the upper and lower
impellers rotate freely.
6. Put adequate amount of detergent into
the detergent dispenser.
7. Check if the Salt and Rinse Aid
indicators light and add salt and/or
rinse aid if needed.
8. Close the door of the dishwasher.
Programme selection
1. Press On / Off key to turn on your
machine.
2. Refer to the table of "Programme data
and average consumption values"
to determine a washing programme
suitable for your dishes.
3. Press Programme Selection keys until the
number of the programme you selected
appears on the Programme indicator.
Use up arrow to switch to the next
programme, and down arrow to switch
to the previous one.
Preparing the machine
1. Open the tap.
2. Plug in to the socket.
3. Open the door of the dishwasher.
DISHWASHER / USER INSTRUCTIONS
25/48 EN
26 /48 EN
50 ºC
-
Prewash
35 ºC
Mini 30'
4
Programme Table
3
40 ºC
GlassCare
5
+
+
238
10
0,82
-
-
75
14,4
0,70
Dry
Duration (min)
Water (I)
Energy (kWh)
0,90-1,45
10,2-14,4
110-210
+
+
+
A
Medium to high
-
4
15
-
-
+
-
-
0,80
10,4
30
-
+
-
A
Low
0,92
13
102
+
+
+
A
Low
70 ºC
Intensive
7
70 ºC
HygieneCare
8
1,30
10,2
58
+
+
-
A
Medium
1,43
16,2
156
+
+
+
A
High
1,68
17,6
135
+
+
+
A
High
It is the daily
It is suitable for
Using this
washing
heavily soiled
would be
programme to pans and trays. appropriate to
wash the
wash heavily
normally soiled
soiled dishes
left dishes in
left for a long
the fastest way.
time and when
extra hygiene is
needed
especially to
wash baby stuff.
60 ºC
QuickWash 58'
6
50 ºC
QuietWash
10
1,36
18,6
189
+
+
+
A
Medium
1,15
9,4
266
+
+
+
A
Medium
It is the daily
It is the most
washing
suitable
programme to
washing
wash the
programme for
normally soiled
daily mixed
dishes including left dishes in
the most silent
plastic items.
way.
While delicate
glass items are
washed in the
upper basket,
pans and trays
can be washed
in the lower
basket.
-
All-in-Wash
9
The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions. * Reference programme for
testing institutes. The tests in accordance with EN 50242 must be carried out with a full water softener salt dispenser and a full rinse aid reservoir, and using the test programme.
+
-
A
Medium
Wash
-
-
40 ºC-65 ºC
Auto 40-65°C
2
Special
It is suitable to It is suitable for
It is suitable for It determines
quickly washing programme for
remove the
washing the
the soiling
normally soiled degree of the rough remnants the lightly soiled gentle cleaning
of delicate
dishes that
left daily dishes dishes and sets on the dishes to
glassware.
have
in the most
the temperature be left in the
undergone
economical way. and amount of dishwasher. It
precleaning
also prevents
the washing
process.
water as well as odour formation
inside the
the washing
machine.
time
automatically. It
is suitable for all
dish types.
-
This
programme is
recommended
to be
operated on
every 1-2
months for
machine
cleaning and
necessary
hygiene.
The programme
should be
operated
while the
machine is
empty.
In order to
achieve
an efficient
Eco *
1
SelfCare
0
Prewash
Detergents
A=25 cm³/15 cm³ B=5 cm³
Degree of Soiling
Cleaning temperature
Programme name
Programme number
Operating the product
DISHWASHER / USER INSTRUCTIONS
Operating the product
Auxiliary functions
Washing programmes of your dishwasher
are designed to obtain the best cleaning
effect, considering the type of the soil, soiling
degree and properties of the dishes to be
washed.
Auxiliary functions are provided in order to
enable you to save time, water and energy
and to perform a more comfortable washing
with conditions specific to you.
Auxiliary functions are not
suitable for all washing
programs. Indicator of the
auxiliary function that is not
compatible with the programme
will not be active.
C
Tablet detergent function
Allows to obtain a better drying performance
from the multi-purpose detergents called
as all in one detergents such as 2in1, 3in1,
4in1, 5in1 and etc., depending on the
hardness level of the tap water.
If you have used the Tablet
features during the last washing
programme you used, Tablet
function will remain active in the
next washing programme you
will select. If you do not want to
use these functions in the new
program you have selected,
press the Tablet Detergent key
until the indicator of the relevant
function turns off.
C
C
Tablet Detergent function may
cause change in the programme
duration.
TrayMaster Function
Select Intensive 70°C programme and press
function key to run this function.
Steam Shine Function
It provides superior drying performance.
DISHWASHER / USER INSTRUCTIONS
Express Function
It shortens the time of the washing cycle
selected and decreases water consumption
by enabling washing under higher pressure.
Active Self Cleaning Filter
With this function, your micro filter will be
cleaned by a special system at the end
of washing cycle and it is made ready for
use for the next usage of the machine. This
cleaning process increases the cleaning
period of the micro filter from 2 weeks
to 3 months and thus boosts the washing
performance. Employing this function in
every washing cycle is recommended in
order to get the most out of it.
To change the filter cleaning settings:
1. After switching your machine on,
press Time Delay and P / P+ keys
simultaneously. Keep them pressed until
the countdown 3, 2, 1 is completed on
the display.
2. Go to the F: position on the display by
pressing the P / P+ key. Filter cleaning
function is disabled in «F:0» position. It
is enabled in «F:1» position. Select the
position you want with the Time Delay
key.
3. Turn off the machine with the On/Off
key to save the changes.
SelfCare
This programme is recommended to be
operated on each 1-2 months for machine
cleaning and necessary hygiene. The
programme should be operated while the
machine is empty.
In order to achieve an efficient result, it is
recommended to use together with special
machine cleaning agents.
Do not use this programme to
clean dishes. As it operates in
high temperatures, it is harmful
for the dishes.
C
27/48 EN
Operating the product
Programming the washing
time
Time Delay
If an economical electricity tariff is applied
in your region, you can use the Time
Delay function to wash your dishes during
appropriate hours.
You can delay the start of the selected
programme up to 24 hours. Time Delay
cannot be set after the programme starts.
1. Press the Time Delay function key after
selecting the washing programme and
other auxiliary functions.
2. Once you press the Time Delay key,
Display Information Line will show
"0:00" and Time Delay indicator will
start flashing.
3. Press Time Delay key to set the time you
wish. Time will increase with increments
of 30 minutes up to 6 hours and after
that in 1 hour increments up to 24 hours
every time you press the key.
4. Press Start / Pause / Cancel key to
start countdown for the Time Delay.
Time Delay indicator and Start / Pause
indicator will light continuously until
the end of the period. Time Delay is
displayed on the Display Information
Line. Selected programme will start as
soon as the countdown is over.
Changing the settings during Time
Delay
While the Time Delay function is activated,
you cannot make changes in the washing
programme, auxiliary functions or the
duration of delay time.
Programme and auxiliary
functions cannot be set/changed
after the programme has started.
C
When you press the key without
canceling the Time Delay
function, “Time Delay On”
warning will be displayed.
To cancel the Time Delay function
1. Press and hold Start / Pause / Cancel
key for 3 seconds.
2. When the Start / Pause / Cancel key is
pressed and hold, "3", "2", "1" appear
on the Display Information Line. Time
Delay indicator will go off at the end of
the cancellation process and delaying
process is cancelled.
C
C
You can select and start a
new programme following the
cancellation of Time Delay
function.
Time Delay function cannot be
set after the programme starts.
Starting the programme
To start your machine after selecting the
programme and auxiliary functions, press
Start / Pause / Cancel key.
When the programme is started, Start /
Pause indicator ( ) lights. Display Information
line shows "Program Started" for 3 seconds.
C
28 /48 EN
DISHWASHER / USER INSTRUCTIONS
Operating the product
C
C
Your machine performs water
softening depending on the
hardness level of the supply
water. Remaining time displayed
towards the end in some
programmes can be different
from the time indicated at the
beginning due to this process.
The total time can also change
while the programme is running
depending on the ambient
temperature where your machine
is installed, temperature of the
supply water and amount of the
dishes.
Pay attention not to open the
door of the machine when it is
running. Stop the machine by
pressing Start / Pause / Cancel
key if you have to open the
door. Then, open the door of
the machine. There may be a
rush of vapour when you open
the door of your machine; be
careful. Close the door of your
machine and press Start / Pause
/ Cancel key again. Programme
will resume running.
Programme follow-up
You can follow-up the washing step in which
the current programme is in from the Display
Information line messages as well as from
the remaining time.
Messages related to Washing, Rinsing and
Drying steps will be displayed respectively
on the Display Information line while the
selected programme is running. Programme
step is shown as left aligned and the
remaining time is shown as right aligned. This
screen and bar screen alternate in every 10
seconds.
DISHWASHER / USER INSTRUCTIONS
C
The machine will remain silent
in pause mode for some time
in order to remove the water in
the machine and on the dishes
completely and to have the
water softener cleaned, and then
it will resume running in drying
mode.
Child (Key) Lock
You may prevent other people from
interrupting and changing the programme
cycle and time delay while the machine is
running.
To activate the child lock:
1. Press and hold the Child (Key) Lock key
for three seconds.
2. A key sound comes from the buzzer
when the Child Lock key is pressed for
the first time. If the Child Lock key is
pressed and hold more, "Child Lock:
3", "Child Lock: 2", "Child Lock: 1"
and "Child Lock: On" are displayed
on the Display Information Line. If any
key other than On/Off key is pressed
while the Child Lock is active, "Child
Lock: Open" is displayed on the Display
Information line together with the
warning sound.
C
C
C
Child Lock prevents the selected
programme or functions from
being changed and disables the
Start / Pause / Cancel key.
Child Lock does not lock the
door of the machine.
If you turn your machine off by
using On/Off key at the end of
the programme, the Child Lock
will be deactivated automatically.
29/48 EN
Operating the product
C
At the end of the programme or
if no programme is started, in
order to provide energy saving
the machine is automatically
switched off after a certain
amount of time
To deactivate the Child Lock:
1. Press and hold the Child (Key) Lock key
for 3 seconds.
2. When the Child Lock key is pressed
and hold for a long time, "Child Lock:
3", "Child Lock: 2", "Child Lock: 1" and
"Child Lock: Off" appear on the Display
Information Line.
Canceling a programme
1. Press Start / Pause / Cancel key for 3
seconds to cancel the programme.
2. When the Start / Pause / Cancel key is
pressed and hold, "Cancel 3", "Cancel
2", "Cancel 1" appear on the Display
Information line.
3. When the canceling process starts,
Display Information line shows
"Canceling..." and once the process
is completed, "Cancelled" message is
given on the Display Information line.
For a couple of minutes the machine
will perform the necessary operations
required to cancel the programme.
C
C
30 /48 EN
You can select and operate a
new programme following the
cancellation of the programme.
There might be residues of
detergent or rinse aid left in the
machine and / or on the pieces
being washed depending on the
step the programme you have
cancelled was in.
Changing the auxiliary function
To change the auxiliary functions after starting
the programme, you should cancel the
programme in the first place. Then, you can
select and start new functions.
Machine settings
You can use "Settings Menu" to change the
"Water Hardness", "Active Self-cleaning
Filter", "Inner Illumination", "Doormatic",
"Volume", "Brightness" and "Language"
settings you are going to use in your machine,
or to restore the factory settings.
"Active Self-cleaning Filter",
"Inner Illumination" or
"Doormatic" features may not
be available in your machine
depending on its model.
C
To enter the Settings menu:
1. Press On / Off key to turn on your
machine.
2. Press Settings Menu key for 3 seconds to
enter the "Settings Menu".
3. "Settings 3", "Settings 2", "Settings 1"
message will be displayed on the Display
Information line and 3 seconds later you
will be in the Settings Menu.
4. After entering into the "Settings menu",
press function key (c) to switch to the next
main menu, and press function key (a) to
go back to the previous main menu.
5. Use function key (b) to make changes
in the menus. Changes made are stored
automatically.
C
You will be asked for your
approval when changes are
made in "Language" or " Factory
Settings?" menus.
DISHWASHER / USER INSTRUCTIONS
Operating the product
6. Press either one of function key (c) or
function key (a) to store the changes
made in the "Language" setting or in
the " Factory Settings?" menu. Following
message will be displayed upon
pressing the key.
7. Press function key (b) to save the
change. If you press function key (a)
without making any changes in the
menu, you will switch to the next setting
menu and the changes made will not be
saved.
8. To exit the "Settings Menu", press the
function key (d) for 3 seconds.
9. "Exit settings 3", "Exit settings 2", "Exit
settings 1" will be displayed on the
Display Information line and 3 seconds
later you will be out of the Settings
Menu.
C
Time Delay and Start / Pause
/ Cancel keys do not have any
function in the "Settings Menu".
Pressing these keys has no effect.
Adjusting the Water Hardness
You need to adjust the "Water Hardness"
level to one of the following values that suits
the properties of your supply system.
Adjust the new water hardness
level according to the Water
hardness level instruction
supplied with your machine.
C
1. Lime free
2. Very slightly limy
DISHWASHER / USER INSTRUCTIONS
3.
4.
5.
6.
A little limy
Mediocre limy
Limy
Very much limy
Automatic Detergent Detection
Feature
The product has a feature to automatically
detect the type of the detergent and adjust
the washing programme and drying
system to the best performance. If special
tablet detergent is used, the programme
duration can be extended by 20 minutes in
order to optimize the washing and drying
performance. (This feature may not be
available depending on the model you have
purchased.)
Active self-cleaning filter
When you enable this function, your micro
filter will be cleaned by a special system at
the end of washing and it is made ready
for use for the next usage of the machine.
This cleaning process increases the cleaning
period of the micro filter from 2 weeks
to 3 months and thus boosts the washing
performance. Employing this function in
every cycle is recommended in order to get
the most out of it.
There are two options, namely "On" and
"Off" for this function. It is set to "Off" at
the factory. You have to change this from
"Off" to "On" position when you want to
use the function. (This feature may not be
available depending on the model you have
purchased.)
Inner Illumination
When you enable this function, internal
illumination lamp will light every time you
open the door of your machine. There are
two options, namely "On" and "Off" for this
31/48 EN
Operating the product
function. It is set to “Off” at the factory. (This
feature may not be available depending on
the model you have purchased.)
Doormatic
When you enable this function, the door of
your machine will be opened automatically
at the end of the programme. Thus, the
drying efficiency is increased and energy
saving is provided. There are two options,
namely "On" and "Off". It is set to "On" at
factory. (This feature may not be available
depending on the model you have
purchased.)
A
C
A
If the Doormatic is enabled, the
door of your machine will be
opened automatically within
2 minutes at the end of the
programme. The lock mechanism
prevents the door from being
closed for the next 1 minute. Do
not try to close the door during
this period.
Do not unload your machine
for 30 minutes after the door
is opened automatically. Thus,
you will obtain a better drying
performance.
You should not stand in front of
the door while it is opening.
When you switch "Doormatic" feature to
Off position, you will have it disabled for all
programmes.
If you want to enable it again, switch the
"Doormatic" feature back to "On" position
32 /48 EN
again after entering in the "Settings menu".
Volume setting
Select one of the following levels for the
Volume setting:
1. High
2. Low
Brightness
You can adjust screen brightness to a level
between 1 and 3.
Language
"Language" menu contains 11 different
language options in total.
1. Türkçe
2. English
3. Deutsch
4. Francais
5. Dansk
6. Vlaams
7. Swedish
8. Polski
9. Norsk
10. Pyccкий
11. Flaami
1. Press function key (b) to set the
language you want; the next language
will be selected each time you press the
key.
2. Following message will be displayed
when either of the function key (a) or
function key (d) keys is pressed to store
the selected language.
3. Press function key (b) key to store the
changes or press function key (a) to exit
the Language menu without saving.
DISHWASHER / USER INSTRUCTIONS
Operating the product
Factory Settings?
Proceed as indicated below to cancel all
your personal settings and restore the factory
settings:
1 Press the function key (b) key. Following
message will be displayed upon
pressing the key.
2. Press funciton key (b) key to store the
changes or press function key (a) to exit
the menu without saving.
When factory settings are restored, settings
will have the following values:
Language = Deutsch
Brightness = 2
* Doormatic = On
* Active self-cleaning filter
* Inner Illumination = On
Volume = High
Water Hardness = 1
* These menus may not be available
depending on the model of your machine.
Warning messages
Your machine will give you some important
feedbacks while it is running.
Salt indicator ( )
Please check the salt indicator on the display
to see whether there is adequate amount
of softening salt in the dishwasher or not.
You need to refill the salt reservoir with salt
whenever salt warning indicator appears on
the display of your machine.
Salt indicator warning will
go off automatically once the
programme is started.
Rinse Aid indicator ( )
Please check the rinse aid indicator on the
display to see whether there is adequate
amount of rinse aid in the dishwasher or
not. You need to refill the rinse aid reservoir
with rinse aid whenever rinse aid warning
indicator appears on the display of your
machine.
Rinse aid warning will go
off automatically once the
programme is started.
C
Water Cut-off indicator ( )
Water Cut-off warning indicator will light
when the machine cannot ta ke in water and
"No water!" warning is displayed on the
Display Information line. When the water is
supplied again, warning light will be turned
off automatically.
A
Make sure that the water is
not cut-off and the tap is not
closed when the Water Cut-off
warning light is illuminated. Call
Authorised Service Agent if
water is not cut-off and the tap is
open.
Call service
Please call the service when you see this
warning on the Display Information line. It
is possible that your machine has taken in
plenty of water due to various reasons.
C
DISHWASHER / USER INSTRUCTIONS
33/48 EN
Operating the product
End of programme
Once the washing programme is over,
"Program over" will be displayed on the
Display Information line.
1. Press On / Off key to turn off your
machine.
2. Close the tap.
3. Unplug the machine from the socket.
C
C
34 /48 EN
At the end of the programme or
if no programme is started, in
order to provide energy saving
the machine is automatically
switched off after a certain
amount of time
Leave your dishes in the machine
for about 15 minutes after they
are washed in order to have
them cooled down. Your dishes
will dry in a shorter time if you
leave the door of your machine
ajar during this period. This
process will increase the drying
effectiveness of your machine.
DISHWASHER / USER INSTRUCTIONS
6
MAINTENANCE AND CLEANING
Service life of the product extends and
frequently faced problems decrease if it is
cleaned at regular intervals.
Unplug the product and turn off
the tap before attempting any
cleaning procedures.
A
C
C
Do not use abrasive substances
for cleaning.
Clean the filter and impellers at
least once a week to ensure the
machine operates efficiently.
Cleaning the outer surface of
the product
Cleaning the filters
Clean the filters at least once a week in
order for the machine operates efficiently.
Check if food residues are left on the filters.
If there are food residues on filters, take them
out and clean well under running water.
Filter cleanliness is increased
by 80% with the micro filter
cleaning system available on
your machine.
C
1. Turn the micro filter (1) and coarse filter
(2) assembly counterclockwise and pull
it out from its seating.
Clean the outer surface and door gaskets
of the product gently with a mild cleaning
material and damp cloth. Wipe the control
panel only with a damp cloth.
Cleaning the interior of the
machine
••
••
Clean the interior of the machine
and the tank by running a prewash
programme without detergent or a long
washing programme with detergent
based on the degree of dirtiness.
If water has remained in the machine,
drain the water by performing the
procedures under the topic “Cancelling
a programme”. If the water cannot be
discharged, clean any leftover deposits
that have piled up in the bottom of the
machine, blocking the water path.
2. Pull out the metal / plastic filter (3) from
the seating.
3. Press the two pawls on the coarse filter
inwards and separate the coarse filter
from the assembly.
DISHWASHER / USER INSTRUCTIONS
35/48 EN
Maintenance
and cleaning
Cleaning the hose filter
4. Clean all three filters under tap water by
means of a brush.
A
Do not remove the micro filter
cleaning mechanism (4) for
cleaning (D).
Damages on the machine that may be
caused by impurities coming from the urban
supply water or your own water installation
(such as sand, dirt, rust, etc.) can be
prevented by means of the filter attached to
the water inlet hose. Check the filter and the
hose regularly and clean them if necessary.
1. Turn off the tap and remove the hose.
2. After taking out the filter, clean it under
running tap water.
3. Place the cleaned filter back to its seat in
the hose.
4. Install the hose to tap.
(depends on model)
5. Replace the metal/plastic filter.
6. Place the coarse filter into the microfilter.
Make sure that it is properly seated. Turn
the coarse filter clockwise until a “click”
sound is heard.
C
C
36 /48 EN
Do not use the dishwasher
without filter.
Incorrect placement of the filters
will reduce washing efficiency.
DISHWASHER / USER INSTRUCTIONS
Maintenance and cleaning
Cleaning the impellers
Upper impeller
Clean the impellers at least once a week in
order for the machine operates efficiently.
Check if the holes on the upper impeller (1)
are clogged. If they are clogged, remove
and clean the impeller. Turn its nut to left to
remove the upper impeller (A, B).
Make sure that the nut is tightened well when
installing the upper impeller.
Lower impeller
Check if the holes on the lower impeller (1)
are clogged. If they are clogged, remove
and clean the impeller. Pull the lower
impeller up to remove it (A, B).
DISHWASHER / USER INSTRUCTIONS
37/48 EN
Maintenance and cleaning
Ceiling Impeller
Check if the holes on the top ceiling impeller
(1) of your machine are clogged. If they are
clogged, remove and clean.
To remove them, slightly ( ) push them
upwards and then ( ) turn left (A,B).
To install the impeller, seat it into its slot, push
slightly upwards and turn it rightwards until
it is securely tightened. When the impeller
is released, check if it rotates without any
obstruction.
38 /48 EN
DISHWASHER / USER INSTRUCTIONS
7 TROUBLESHOOTING
Machine does not start.
• Power cable is unplugged. >>> Check if the power cable is plugged in.
• Fuse is blown. >>> Check the fuses in your house.
• Water is cut. >>> Make sure that the water inlet tap is open.
• Door of the machine is open. >>> Make sure that you have closed the door of the
machine.
• On / Off button is not pressed. >>> Make sure that you have turned on the machine by
pressing the On / Off button.
Dishes are not washed clean
• Dishes are not placed orderly in the machine. >>> Load the dishes as described in the
user manual.
• Selected programme is unsuitable. >>> Select a programme with a higher temperature
and cycle time.
• Impellers are stuck. >>> Prior to starting the programme, turn the lower and upper
impellers by hand to make sure that they rotate freely.
• Impeller holes are clogged. >>> Lower and upper impeller holes might be clogged with
food remnants such as lemon pips. Clean the impellers regularly as illustrated in section
“Cleaning and Care”.
• Filters are clogged. >>> Check if the filter system is clean. Clean the filter system regularly
as illustrated in section “Cleaning and Care”.
• Filters are installed incorrectly. >>> Check the filter system and make sure that it is
installed correctly.
• Baskets are overloaded. >>> Do not overload the baskets in excess of their capacity.
• Detergent is stored under unsuitable conditions. >>> If you are using powder detergent,
do not store the detergent package in humid places. Keep it in a closed container if
possible. For ease-of-storing, we recommend you to use tablet detergents.
• Detergent is not sufficient. >>> If you are using powder detergent, adjust the amount of
detergent according to the soiling degree of your dishes and/or programme definitions.
We recommend you to use tablet detergents for optimum results.
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the
machine.
• Detergent dispenser lid is left open. >>> Make sure that the detergent dispenser lid is
closed tightly after adding detergent.
Dishes are not dry at the end of cycle
• Dishes are not placed orderly in the machine. >>> Place your dishes in a way that no
water will accumulate in them.
DISHWASHER / USER INSTRUCTIONS
39/48 EN
Troubleshooting
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the
machine.
• Machine is unloaded right after the programme is over. >>> Do not unload your machine
right after washing process is completed. Slightly open the door and wait for evacuation
of the steam inside for a while. Unload the dishes after the pieces cool down to a
touchable level. Start unloading process from the lower basket. Thus, dropping of water
remained on a piece at upper basket onto the pieces at lower basket is prevented.
• Selected programme is unsuitable. >>> Since rinsing temperature is low at programmes
with short duration, drying performance will also be low. Select programmes with longer
duration for a higher drying performance.
• Surface quality of the kitchen utensils is deteriorated. >>> Desired washing performance
can not be obtained on kitchen utensils with deteriorated surfaces and it is not suitable
to use such utensils in terms of hygiene as well. Also, water can not flow easily on
deteriorated surfaces. It is not recommended to wash such kitchen utensils in dishwasher.
It is normal that drying complaints can be experienced with Teflon kitchen
utensils. It is associated with the structure of Teflon. Since the surface tensions of
Teflon and water are different, water droplets will remain as beads on the Teflon
surface.
Tea, cafe or lipstick stains remain on dishes.
• Selected programme is unsuitable. >>> Select a programme with a higher temperature
and cycle time.
• Surface quality of the kitchen utensils is deteriorated. >>> Tea and cafe stains or other
dye spots may not be cleaned in dishwasher when they have penetrated in deteriorated
surfaces. Desired washing performance can not be obtained on kitchen utensils with
deteriorated surfaces and it is not suitable to use such utensils in terms of hygiene as well.
It is not recommended to wash such kitchen utensils in dishwasher.
• Detergent is stored under unsuitable conditions. >>> If you are using powder detergent,
do not store the detergent package in humid places. Keep it in a closed container if
possible. For ease-of-storing, we recommend you to use tablet detergents.
C
Lime traces remain on dishes and glassware gains a misty appearance
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the
machine.
• Water hardness setting is low or salt level is insufficient >>> Measure the hardness of the
supply water appropriately and check the water hardness setting.
• Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole while
adding salt. Make sure that the salt reservoir lid is tightly closed after finishing the filling
process. Run the prewash programme to remove the salt that spilled inside the machine.
Since the salt granules that will remain under the lid will dissolve during prewash, causing
the lid loosen, check the lid once again at the end of the programme.
40 /48 EN
DISHWASHER / USER INSTRUCTIONS
Troubleshooting
There is a different odour in the machine
C
A new machine has a peculiar odour. It will fade out after a couple of washes.
• Filters are clogged. >>> Check if the filter system is clean. Clean the filter system regularly
as illustrated in section “Cleaning and Care”.
• Dirty dishes are kept in dishwasher for 2-3 days. >>> If you are not going to start the
machine right after you have put the dishes into it, remove the remnants on the dishes and
run the Prewash programme without detergent every 2 days. In such cases, do not close
the door of the machine completely in order to avoid odour build up in machine. You can
also use commercially available odour removers or machine cleaners.
Rust, discoloration or surface deterioration occurs on dishes
• Salt leakage exists. >>> Salt may cause deterioration and oxidation on metal surfaces.
Pay attention not to spill salt around the salt filling hole while adding salt. Make sure that
the salt reservoir lid is tightly closed after finishing the filling process. Run the prewash
programme to remove the salt that spilled inside the machine. Since the salt granules that
will remain under the lid will dissolve during prewash, causing the lid loosen, check the
lid once again at the end of the programme.
• Salty food remnants have remained on dishes for a long time. >>> If cutlery soiled with
such foods will be kept waiting in machine, dirt must be removed by prewash or dishes
must be washed without being kept waiting.
• Electric installation is not grounded. >>>Check if your machine is connected to the actual
grounding line. Otherwise, the static electric created in the product causes arcs on the
surfaces of metal items creating pores, removing the protective cover on the surface and
causing discoloration.
• Intensive cleansers such as bleaches are used. >>> Protective cover on metal surfaces
gets damaged and looses its efficiency in time when it gets in contact with cleansers such
as bleach. Do not wash your dishes with bleach.
• Metal items particularly such as knives are used for purposes other then their intended
uses. >>> Protective cover on the edges of knives may get damaged when they are used
for purposes such as opening cans. Do not use metal kitchen utensils out of their intended
uses.
• Cutlery are made of low quality stainless steel. >>> Corrosion on such items is inevitable;
they should not be washed in dishwashers.
• Kitchen utensils that are already corroded are washed in dishwasher. >>> Rust on a
corroded item can migrate to other stainless steel surfaces and cause corrosion on those
surfaces as well. Such items should not be washed in dishwashers.
DISHWASHER / USER INSTRUCTIONS
41/48 EN
Troubleshooting
Detergent remains in detergent dispenser.
• Detergent dispenser was damp when adding detergent. >>> Make sure that the
detergent dispenser is dried well prior to filling it with detergent.
• Detergent is added long before the washing process. >>> Pay attention to add detergent
shortly before start-up of the washing.
• Opening of the detergent dispenser lid is prevented during washing. >>> Place the dishes
in a way that will not prevent the detergent dispenser lid from opening and the water
going into the machine from impellers.
• Detergent is stored under unsuitable conditions. >>> If you are using powder detergent,
do not store the detergent package in humid places. Keep it in a closed container if
possible. For ease-of-storing, we recommend you to use tablet detergents.
• Impeller holes are clogged. >>> Lower and upper impeller holes might be clogged with
food remnants such as lemon pips. Clean the impellers regularly as illustrated in section
“Cleaning and Care”.
Decorations and ornaments on kitchen utensils are being erased.
C
Decorated glasses and decorated lustre porcelains are not suitable for washing in
the dishwasher. Manufacturers of some glassware and porcelain tableware items
do not recommend washing such kitchen utensils in the dishwashers either.
C
Kitchen utensils that contains or are made of aluminum should not be washed in
dishwasher.
Dishes are scratched.
• Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole while
adding salt. Spilled salt can cause scratches. Make sure that the salt reservoir lid is tightly
closed after finishing the filling process. Run the prewash programme to remove the salt
that spilled inside the machine. Since the salt granules that will remain under the lid will
dissolve during prewash, causing the lid loosen, check the lid once again at the end of
the programme.
• Water hardness setting is low or salt level is insufficient >>> Measure the hardness of the
supply water appropriately and check the water hardness setting.
• Dishes are not placed orderly in the machine. >>> When placing the glasses and other
glassware into the basket lean them not against other dishes but the edges or racks of
the basket or the glass support tines. Striking of the glasses to each other or to other
dishes due to the impact of water during washing can cause breaks, or scratches on their
surfaces.
42 /48 EN
DISHWASHER / USER INSTRUCTIONS
Troubleshooting
A smear remains on glasses that resembles milk stain which can not be
removed when wiped by hand. A bluish / rainbow appearance occurs when
the glass is pointed to light.
• Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when
adding rinse aid.
• Corrosion has occurred on glass due to soft water. >>> Measure the hardness of the
supply water appropriately and check the water hardness setting. If your supply water is
soft (<5 dH), do not use salt. Choose programmes that wash in higher temperatures (e.g.
60-65°C). You can also use glass protective detergents that are commercially available.
Foam forms in the machine.
• Dishes are washed with hand-wash detergent by hand but not rinsed before placing them
into the machine. >>> Hand-wash detergents do not contain antifoam. There is no need to
hand-wash the dishes before placing them into the machine. Removing the coarse soil on
the dishes under tap water, with a tissue paper or fork will be sufficient.
• Rinse aid has spilled into the machine when adding rinse aid. >>> Take care that rinse
aid is not spilled in the machine when you are filling it. Clean any spilled rinse ait with the
help of a tissue paper/towel.
• Lid of the rinse aid reservoir is left open. >>> Make sure that the lid of the rinse aid
reservoir is closed after adding rinse aid.
Kitchen utensils are broken.
• Dishes are not placed orderly in the machine. >>> Load the dishes as described in the
user manual.
• Baskets are overloaded. >>> Do not overload the baskets in excess of their capacity.
Water remains in the dishwasher at the end of the programme.
• Filters are clogged. >>> Check if the filter system is clean. Clean the filter system regularly
as illustrated in section “Cleaning and Care”.
• Discharge hose is clogged/blocked. >>> Check the discharge hose. If necessary, remove
the discharge hose, clear the blockage and insert is as illustrated in the user manual.
C
If you cannot eliminate the problem although you follow the instructions in this
section, consult your dealer or the Authorised Service Agent. Never try to repair
a nonfunctional product yourself.
DISHWASHER / USER INSTRUCTIONS
43/48 EN
8 GUARANTEE
Guarantee Details
Your new Grundig product is guaranteed
against faulty materials, defective
components or manufacturing defects.
The guarantee starts from the date of
original purchase of the product for a
period of three (3) years unless Beko plc
(the “Manufacturer”) agrees to extend the
guarantee for the product in writing. If you
have any questions about the guarantee on
your product (including how long it is valid),
please contact your retailer or our Call
Centre on 0333 207 9920.
This guarantee does not in any way
diminish or affect your statutory rights in
connection with the product. This guarantee
is in addition to your statutory rights as a
consumer. If you have any question about
these rights, please contact the retailer
from which you purchased the product. In
certain circumstances, it is possible that
your statutory rights may offer additional or
higher levels of protection than those offered
under the terms of this guarantee.
What is covered by this guarantee?
• Repairs to the product required as
a result of faulty materials, defective
components or manufacturing defects.
• Functional replacement parts to repair a
product.
• The costs of a Grundig Approved
Engineer to carry out the repair.
What is not covered?
• Transit and delivery damage.
• Cabinet or appearance parts, including
but not limited to control knobs, flaps
and handles.
44 /48 EN
• Accessories and/or consumable items
including but not limited to ice trays,
scrapers, cutlery baskets, filters and light
bulbs.
• Repairs necessary as a direct or indirect
result of:
- Accidental damage, misuse or abuse of
a product.
- An attempted repair of a product by
anyone other than a Grundig Approved
Engineer (the “Engineer”).
- Installation or use of a product where
such installation or use fails to meet the
requirements contained in this guarantee
or the User Instructions Booklet.
• Repairs to a product operated at any
time on commercial or non-residential
household premises (unless we have
previously agreed to the installation
environment).
This guarantee is limited to the cost
of repairing the product. To the
extent permitted by law, Beko plc (the
“Manufacturer”) does not accept and will
not be held liable for any financial loss
incurred in connection with the failure of
any product to operate in accordance with
the expected standards. Such financial loss
includes but is not limited to loss arising from:
• Time taken off work.
• Damaged food, clothing or other items.
• Meals taken at restaurants or from
takeaways.
• General compensation for
inconvenience.
DISHWASHER / USER INSTRUCTIONS
Guarantee
Important Notes
• Your product is designed and built for
domestic household use only.
• The guarantee will automatically be void
if the product is installed or is used in
commercial or non-residential domestic
household premises, unless we have
previously agreed to the installation
environment.
• The product must be correctly installed,
located and operated in accordance
with the instructions contained in the
User Instructions Booklet provided with
your product.
• Professional installation by a qualified
Electrical Domestic Appliance Installer
is recommended for all Washing
Machines, Dishwashers and Electric
Cookers (as incorrect installation may
result in you having to pay for the cost of
repairing the product).
• Gas Cookers must be professionally
installed by a Gas Safe (or Gas
Networks Ireland for Republic of
Ireland) registered gas installer.
• This guarantee is given in respect of
products purchased and used within the
United Kingdom and the Republic of
Ireland.
• This guarantee is effective from the initial
date of purchase of a new product from
an authorised retailer and will be void if
the product is resold.
• This guarantee does not apply to
graded sales (where the product is
purchased as a “second”).
• Possession of a copy of these terms and
conditions does not necessarily mean
that a product has the benefit of this
guarantee. If you have any questions,
please call our Call Centre on the
number set out above.
DISHWASHER / USER INSTRUCTIONS
• The Manufacturer reserves the right to
terminate the guarantee if its staff or
representatives are subjected to physical
or verbal abuse in the course of carrying
out their duties.
• Optional extras, where available (i.e.
extendable feet) are supplied on a
chargeable basis only.
Does Grundig offer replacements?
This is a repair-only guarantee. On
occasion, the Manufacturer may at its
sole discretion, replace your product with
a new product instead of carrying out a
repair. Where a replacement is offered,
this would normally be an identical model,
but when this is not possible, a model of
similar specification will be provided. The
Manufacturer will cover the costs and
arrange for the delivery of the new product
and for the return of the old product. Any
costs related to disconnecting the faulty
product and installing the replacement
product will not be borne by the
Manufacturer unless previously agreed to in
writing. The original guarantee will continue
to apply to the replacement product; the new
product will not come with a new guarantee.
When will the repair take place?
Our Engineers work Monday to Friday
9.00am to 5.00pm. Appointments outside
these hours may be possible at the sole
discretion of the Manufacturer but cannot
be guaranteed. Whilst our Engineers will
endeavour to minimize inconvenience
and to meet requests for specific timed
appointments, this cannot be guaranteed.
We will not be liable for delays or if it is
unable to carry out a repair because a
convenient appointment cannot be arranged.
45/48 EN
Guarantee
Will there be any charge for the
repairs?
It is your responsibility to provide evidence to
the Engineer that your product is covered by
this guarantee with a proof of purchase. The
Manufacturer reserves the right to charge for
the reasonable cost of any service call if:
• You cannot provide evidence that your
product is covered by this guarantee.
• Where a service call has been made
and the engineer finds that there is no
fault with your product.
• That your product has not been installed
or operated in accordance with the User
Instructions Booklet.
• That the fault was caused by something
other than faulty materials, defective
components or manufacturing defects.
• For missed appointments.
Payment of these costs are due immediately
upon the Engineer providing you with an
invoice. The Manufacturer reserves the
right to terminate the guarantee if you fail to
pay the costs for the service call in a timely
manner.
If you are a resident of the United Kingdom,
this guarantee will be governed by English
law and subject to the English Courts, save
where you live in another part of the United
Kingdom, in which case the law and courts
of that location will apply.
If you are resident in the Republic of Ireland,
this guarantee will be governed by Irish law
and the Irish courts will have jurisdiction.
46 /48 EN
DISHWASHER / USER INSTRUCTIONS
Guarantee
HOW TO OBTAIN SERVICE
Please keep your purchase receipt or other proof of purchase in a safe place; you will need
to have it should the product require attention under guarantee.
It will be useful if you complete the details below, as it will help us assist you when requesting
service (the model number is printed on the Instruction Booklet and the serial number is
printed on the Rating Label affixed to the appliance). Recording of these details alone will
not count as proof of purchase. A valid proof of purchase is required for under guarantee
service.
The area around the product must be easily accessible to the Engineer without the need for
cabinets or furniture being removed.
It is your responsibility to ensure our Engineers have a clean and safe environment to carry
out any repairs.
……………………………………………………………………………………………...........................……………
Model No:
Serial No:
Retailer:
Date of purchase:
…………………………………………………………………………………….........................……………………..
For service under guarantee simply telephone the appropriate number
below
UK Mainland & Northern Ireland 0333 207 9920 or customerservice@support.
grundig.co.uk
Republic of Ireland: 01 691 0203
Register your appliance at: grundig.co.uk/support/register
Before requesting service please check the troubleshooting guide in the Operating Instructions
as a charge may be levied where no fault is found even though your product may still be
under guarantee.
Service once the manufacturers guarantee has expired
If you have purchased an extended guarantee please refer to the instructions contained within
the extended guarantee agreement document, otherwise please call the appropriate number
above where service can be obtained at a charge.
Should you experience any difficulty in obtaining service contact the Grundig Customer
Helpline on Tel: 0333 207 9920 or e-mail: customerservice@support.grundig.co.uk
…………………………………………………………......................................................................................
This guarantee is provided by Beko plc. Beko House, 1 Greenhill Crescent, Watford, Herts,
WD18 8QU. Beko plc is registered in England and Wales with company registration number
02415578.
15 0784 0100_AB_UK_GRUNDIG_YC5_EN/ 27-12-16.(13:48)
DISHWASHER / USER INSTRUCTIONS
47/48 EN
www.grundig.com