Dishwasher
User’s Manual
DIN14C10
Please read this user manual first!
Dear Customer,
We hope that you get the best results from your product which has been manufactured
with high quality and state-of-the-art technology. Therefore, please read this entire
user manual and all other accompanying documents carefully before using the product
and keep it as a reference for future use. If you handover the product to someone else,
give the user manual as well. Follow all warnings and information in the user manual.
Remember that this user manual is also applicable for several other models. Differences
between models will be identified in the manual.
Explanation of symbols
Throughout this User Manual the following symbols are used:
C
A
B
Important information or useful
hints about usage.
Warning for hazardous
situations with regard to life and
property.
Warning for electric shock.
Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations.
Do not dispose of the packaging materials together with the domestic or other
wastes. Take them to the packaging material collection points designated by the local
authorities.
CONTENTS
1 INSTRUCTIONS FOR SAFETY
AND ENVIRONMENT
4
General safety........................................4
Intended use...........................................4
Children’s safety....................................5
Disposing of packaging material.........5
Transportation of the product............5
Compliance with WEEE Directive and
Disposing of the Waste Product..........6
Compliance with RoHS Directive........6
Package information.............................6
2 DISHWASHER7
Overview.................................................7
Condensing Drying System..................8
Technical specifications.......................8
3 INSTALLATION9
Appropriate installation location........9
Connecting water supply.....................9
Connection to the drain..................... 10
Adjusting the feet.............................. 10
Electrical connection.......................... 10
This appliance must be earthed........11
Fitting a different plug........................11
Initial use...............................................11
4 PREPARATION12
Tips for energy saving........................12
Water softening system.....................12
Adjusting the water softening
system...................................................12
Adding salt............................................12
Water hardness & regeneration
settings.................................................13
Detergent..............................................15
Adding detergent................................15
Tablet detergents............................... 16
Rinse aid................................................17
Cutlery basket ..................................... 20
Height setting with empty basket... 20
Collapsable lower basket tines..........21
Upper basket height adjustable
rack.........................................................21
5 OPERATING THE PRODUCT22
How to cancel the washing
programme.......................................... 23
How to change the washing
programme.......................................... 23
Half Load Function............................. 23
Tablet Detergent Function............... 23
Time Delay........................................... 23
Warning Sound and Inner Illumination
Settings (Depends on model)........... 24
6 MAINTENANCE AND
CLEANING26
Cleaning the outer surface of the
product................................................. 26
Cleaning the interior of the machine.26
Cleaning the filters............................. 26
Cleaning the hose filter......................27
Cleaning the impellers........................27
Lower impeller.....................................27
Upper impeller..................................... 28
7 TROUBLESHOOTING29
8 GUARANTEE34
1 InstructIons for safety and envIronment
This section contains safety
instructions that will help to
give protection from risk of
personal injury or property
damage. Failure to follow
these instructions shall void all
warranties.
••
••
General safety
••
••
••
••
••
••
Never place the product
on a carpet-covered floor;
otherwise, lack of airflow
beneath the product will
cause electrical parts to
overheat. This will cause
problems with your product.
Do not operate the product
if the power cable / plug is
damaged! Call the Authorised
Service Agent.
Connect the product to a
grounded outlet protected
by a fuse complying with
the values in the “Technical
specifications” table. Do
not neglect to have the
grounding installation made
by a qualified electrician.
Our company shall not be
liable for any damages that
will arise when the product
is used without grounding
in accordance with the local
regulations.
The water supply and
draining hoses must be
securely fastened and remain
undamaged.
Unplug the product when not
in use.
Never wash the product by
spreading or pouring water
onto it! There is the risk of
4 /35 EN
••
••
••
••
••
electric shock!
Never touch the plug with
wet hands! Never unplug by
pulling on the cable, always
pull out by grabbing the plug.
The product must
be unplugged during
installation, maintenance,
cleaning and repairing
procedures.
Always have the repair
procedures carried out by the
Authorised Service Agent.
Manufacturer shall not be
held liable for damages that
may arise from procedures
carried out by unauthorised
persons.
Never use chemical solvents
in the product. They bring
forth the risk of explosion.
When you pull the upper
and lower baskets out
completely, the door of the
product will bear all the
weight of the baskets. Do not
put other loads on the door;
otherwise, the product may
tilt.
Never leave the door of
the product open apart
from loading and unloading
procedures.
Do not to open the door
of the product when it is
running unless necessary.
Be careful for the rush of
hot steam when you need to
open the door.
Intended use
••
This product has been
designed for domestic use.
Dishwasher / User’s Manual
InstructIons for safety and envIronment
••
It must be used to do the
domestic type dishes only.
•• This appliance is intended
to be used in household and
similar applications such as:
- Staff kitchen areas in shops,
offices and other working
environments.
•• Only dishwasher safe
detergents, rinse aids and
additives must be used.
•• The manufacturer waives
any responsibility arisen
from incorrect usage or
transportation.
•• This appliance can be used by
children aged from 8 years
and above and persons with
reduced physical,sensory
or mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Children
shall not play with the
appliance. Cleaning and user
maintenance shall not be
made by children without
supervision.
Children’s safety
••
••
Electrical products are
dangerous for the children.
Keep children away from the
product when it is in use. Do
not let them to tamper with
the product.
Do not forget to close the
door of the product when
leaving the room where it is
located.
Dishwasher / User’s Manual
••
Store all detergents and
additives in a safe place
away from the reach of the
children.
Disposing of packaging
material
Packaging materials are
dangerous to children. Keep
packaging materials in a safe
place away from reach of the
children.
Packaging materials of the
product are manufactured from
recyclable materials. Dispose
of them properly and sort in
accordance with recycled waste
instructions. Do not dispose
of them with normal domestic
waste.
Transportation of the
product
A
If you need to move the
product, do it in upright
position and hold from
the rear side. Tilting the
product onto its front
side may cause the
electronic parts in it get
wet and damaged.
1. Unplug the product before
transporting it.
2. Remove water drainage and
water supply connections.
3. Drain the remaining water in
the product completely.
5 / 35 EN
InstructIons for safety and envIronment
Compliance with WEEE
Directive and Disposing
of the Waste Product
collection points designated by
the local authorities.
This product complies with
EU WEEE Directive
(2012/19/EU). This product
bears a classification
symbol for waste electrical and
electronic equipment (WEEE).
This product has been
manufactured with high quality
parts and materials which can be
reused and are suitable for
recycling. Do not dispose of the
waste product with normal
domestic and other wastes at the
end of its service life. Take it to
the collection center for the
recycling of electrical and
electronic equipment. Please
consult your local authorities to
learn about these collection
centers.
Compliance with RoHS
Directive
The product you have purchased
complies with EU RoHS Directive
(2011/65/EU). It does not contain
harmful and prohibited materials
specified in the Directive.
Package information
Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations. Do
not dispose of the packaging
materials together with the
domestic or other wastes. Take
them to the packaging material
6 /35 EN
Dishwasher / User’s Manual
2
Dishwasher
Overview
1. Upper impeller
2. Lower basket
3. Lower impeller
4. Rating Label
5. Control panel
6. Door
7. Detergent dispenser
8. Filters
9. Cutlery basket
10. Salt reservoir lid
11. Upper basket rail
12. Upper basket
13. Condensing Drying System
Dishwasher / User’s Manual
13
7 / 35 EN
Dishwasher
Technical specifications
Compliance to standards and test data / EC declaration of conformity
This product complies with the following EU directives;
Development, production and sales stages of this product comply with the safety
rules included in all pertaining European Community regulations.
2006/95/EC, 2004/108/EC, 93/68/EC, IEC 60436/DIN 44990, EN 50242
Power input
220-240 V, 50 Hz (see rating label)
Total power consumption
1800-2100 W (see rating label)
Heater power consumption
1800 W (see rating label)
Total current (depends on the model)
10 A (see rating label)
Drain pump power consumption
30 W (see rating label)
Water pressure
0.3 –10 bar (= 3 – 100 N/cm² = 0.01-1.0
Mpa)
C
C
C
Technical specifications may be changed without prior notice to improve the
quality of the product.
Figures in this manual are schematic and may not match the product exactly.
Values stated on the markings of the product or in the printed documents
accompanying the product are obtained in the laboratory on basis of the
relevant standards. Depending on operational and environmental conditions of
the product, these values may vary.
Condensing Drying System
Condensing drying system ensures efficient drying of your dishes.
Note for test institutions:
Data required for performance tests shall be provided upon request. Requests can be
e-mailed to the following address:
dishwasher@standardloading.com
Do not forget to provide the code, stock and serial numbers of the product to be tested in
your request e-mail along with your contact information. Code, stock and serial numbers of
the product may be found on the type label attached to the side wall of the door.
8 /35 EN
Dishwasher / User’s Manual
3 Installation
To make the product ready for use,
make sure that the electricity, tap water
supply and water drainage systems are
appropriate before calling the Authorised
Service Agent. If they are not, call a
qualified technician and plumber to have
any necessary arrangements carried out.
Preparation of the location
and electrical, tap water and
waste water installations at the
place of installation is under
customer's responsibility.
C
••
••
Do not install the product at places
where temperature may fall below
0ºC.
Place the product on a rigid floor. Do
not place it on a long pile rug or similar
surfaces.
Ensure the power cable does
not get trapped under the
product.
B
••
Make sure that you select a location
that will allow you to load and unload
the dishes in a fast and comfortable
manner.
Install the product in a place close
to the tap and the drain. Select the
installation location by considering
that it will not be changed after the
connections are made.
B
A
Manufacturer shall not be held
responsible for damages arising
from processes carried out by
unauthorised persons.
••
Connecting water supply
C
Prior to installation, visually
check if the product has any
defects on it. If so, do not have
it installed. Damaged products
cause risks for your safety.
Make sure that the water inlet
and discharge hoses are not
folded, pinched or crushed
while pushing the product into
its place after installation or
cleaning procedures.
When placing the product, pay attention
not to damage the floor, walls, piping, etc.
Do not hold the product from its door or
panel to move it.
Appropriate installation
location
••
Place the product on a solid and flat
floor that has sufficient load carrying
capacity! The product must be
installed on a flat surface in order for
the door to be closed comfortably and
securely.
Dishwasher / User’s Manual
••
••
••
Do not use old or used water inlet
hose on the new product. Use the new
water inlet hose supplied with the
product.
Connect the water inlet hose directly
to the water tap. Pressure coming
from the tap should be minimum 0.3
and maximum 10 bars. If the water
pressure exceeds 10 bars, a pressure
relief valve should be installed in
between.
Open the tap completely after making
the connections to check for water
leaks.
For your safety, close the water
inlet tap completely after the
washing programme is over.
A
9 / 35 EN
Installation
Connection to the drain
C
Before you insert the plug into the wall
socket make sure that the voltage and
the frequency shown in the rating label
corresponds to your electricity supply.
We recommend that this appliance be
connected to the mains supply via a
suitable switched and fused socket in a
readily accessible position.
min
120
If the supply cord or the mains lead is
damaged please do not replace it yourself.
The supply cord or the mains lead must be
replaced by a Authorised Service Agent or a
similarly qualified person.
min
300
min 500
max 1000
Water discharge hose can directly be
connected to the drain hole or sink’s
drainage. The length of this connection
must be min. 50 cm and max. 100 cm from
the floor. A discharge hose longer than 4
meters will cause washing performance
to be affected.Attach the water discharge
hose to the drainpipe without bending
it. Tightly fix the water discharge hose
to the drainpipe in order to prevent any
dislocation of the water discharge hose
during operation of the product.
Electrical connection
Drainpipe must be connected
to the foul water system and it
should not be connected to any
surface water drain.
Adjusting the feet
If the door of the product cannot be closed
properly or if the product wobbles when
you push it slightly, then you need to adjust
the feet of the product. Adjust the feet of
the product as illustrated in the relevant
section.
10 /35 EN
Dishwasher / User’s Manual
Installation
A
This appliance must
be earthed
If the fitted moulded plug is not
suitable for your socket, then
the plug should be cut off and
an appropriate plug fitted.
Destroy the old plug, which is
cut off as a plug with a bared
cord could cause a shock
hazard if inserted into a socket
elsewhere in the house.
The moulded plug on this
appliance incorporates a 13A
fuse. Should the fuse need to
be replaced an ASTA approved
BS1362 fuse of the same rating
must be used. Do not forget
to refit the fuse cover. In the
event of losing the fuse cover,
the plug must not be used
until a replacement fuse cover
has been fitted. Colour of the
replacement fuse cover must
be the same colour as that
visible on the pin face of the
plug. Fuse covers are available
from any good electrical store.
Fitting a different plug
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals on your plug, proceed as follows:
1.
2.
Connect the green - yellow or green
(earth) wire to the terminal in the plug
marked ‘E’ or with the symbol
or
coloured green and yellow or green.
Connect the blue (neutral) wire to
the terminal in the plug marked ‘N’ or
coloured black.
Dishwasher / User’s Manual
3.
Connect the brown (live) wire to the
terminal in the plug marked ‘L’ or
coloured red.
With the alternative plugs a 13A fuse must
be fitted either in the plug or adaptor or
in the main fuse box. If in doubt contact a
qualified electrician.
Initial use
Before starting to use the product, make
sure that all preparations are made in
accordance with the instructions in
sections “Important safety instructions”
and “Installation”.
•• Before using the product, fill the salt
reservoir with 1 litre of water, add salt
(see next page) and stir to dissolve.
Run the Dishwasher without dishes
on a short programme with a small
amount of detergent.
There might be a small amount
of water left in the product
after factory quality control
tests. This causes no harm to
the product.
A
11/35 EN
4
Preparation
Tips for energy saving
operates with the same performance
continuously. Dishwasher salt is used for
Following information will help you use the
product in an ecological and energy-efficient this purpose.
Use only special softening salts
manner.
produced particularly for the
Wipe away any coarse food remnants on
dishwashers in your machine.
the dishes before putting them in the
product. Operate the product after filling it
We recommend using granular
completely. When selecting a programme,
or powder softening salts. Do
consider the table of “Programme data and
not use salts that are insoluble
average consumption values”.
in water such as table salt or
Do not put more detergent than suggested
common salt. Performance of
on the detergent package.
water softening system may
C
C
Water softening system
C
Your dishwasher requires soft
water. If the hardness of the
water is above 6°dH, the water
must be softened and descaled.
Otherwise, ions that create
the hardness will accumulate
on the surfaces of the dishes
and may adversely affect the
washing, shining and drying
performances of the product.
C
get worse in time.
Salt reservoir will fill with water
when you start the product.
Therefore, add the softening
salt before starting the
machine.
1. First take the lower basket out to add
softening salt.
The product is equipped with a water
softening system which reduces the
hardness of incoming water. This system
softens the supply water that enters into the
product to a level that will allow washing the
dishes with the required quality.
Adjusting the water
softening system
Washing performance will increase when
water softening system is adjusted properly.
Adjust the new water hardness level
according to the Water hardness level
instruction in this booklet.
Adding salt
Water softening system needs to be
regenerated in order that the product
12 /35 EN
Dishwasher / User’s Manual
Preparation
2. Turn the salt reservoir lid counter
clockwise to open it (A, B).
Salt reservoir will fill with water
when you start the product.
Therefore, add the softening
salt before starting the
machine.
C
C
Before initial use, fill the water
softening system with 1 litre of
water (C).
4. Replace the lid and tighten it securely
when the reservoir is full.
5. If you will not start a washing programme
immediately after adding the salt, run the
machine empty in the shortest programme
to dissolve and wash away the scattered
salt in the machine.
Water hardness &
regeneration settings
The dishwasher requires lime free water.
Hard water leaves watermarks on your
dishes. Your dishwasher has a special
water softening system to remove the
hardness of the tap water. Setting this
system correctly will increase the washing
effectiveness.
To find out the hardness level of water in
your area, contact your local Water Board or
Determine water hardness level by the help
of test strip provided.
3. Fill the salt reservoir with salt by using
salt funnel (D). To speed up dissolution rate
of salt in water, stir it with a spoon.
C
If you move to a different location,
the level of water hardness will
possibly be different. It is essential to
reset the water hardness in order to
obtain optimum washing efficiency.
You can put about 2 kg of
Dishwasher salt into the salt
reservoir.
Dishwasher / User’s Manual
13/35 EN
Preparation
Test Strip
Remove the
Let the water Fill a glass with Take the test strip
test strip from flow from your tap water and out of the water and
its packing. tap for 1 minute. dip the test strip
shake it.
into water for 1
second.
Hold for
1 minute.
Level 1
No Lime
Level 2
Very low lime content
Level 3
Low lime content
Level 4
Medium lime content
Level 5
High lime content
Level 6
Very High lime content
Set the water hardness level of your dishwasher
according to the result shown by the test strip.
To Adjust the Water Hardness
1. Turn on the machine by pressing On / Off key while pressing and holding the
Programme Selection key when the machine is in off position. Press and hold the
programme key until the water hardness level stored on your machine is displayed in
the program indicator. Start / Pause indicator will start flashing once the stored water
hardness setting is displayed.
2. By using Programme Selection key, adjust water hardness level according to the
hardness of the supply water. See “Water hardness level adjustment table” for correct
setting.
3. Select the water hardness level suitable to your machine from the Water Hardness
Level Adjustment Table by pressing the Delayed Start Key.
4. Press «Start/Pause/Cancel» key for once to store the level you have selected.
5. Start / Stop icon will light continuously when the new water hardness level is stored.
6. Press the On/Off button to turn off your machine.
Water Hardness Level Adjustment Table
Hardness
Level
1st Level
2nd Level
3rd Level
4 Level
th
5th Level
6th Level
English Water
Hardness °dE
German Water
Hardness °dH
French Water
Hardness °dF*
0-5
0-4
0-8
6-9
5-7
9-13
10-15
8-12
14-22
Press the Programme Selection button to set the water hardness
level to P2 position.
16-19
13-15
23-27
Press the Programme Selection button to set the water hardness
level to P3 position.
20-24
16-19
28-34
Press the Programme Selection button to set the water hardness
level to P4 position.
25-62
20-50
35-90
Press the Programme Selection button to set the water hardness
level to P5 position.
Water Hardness Level Indicator
Press the Programme Selection button to set the water hardness
level to P1 position.
If the hardness level of the water that you use is above 90 °dF (French standard for water
hardness) or if you are using well water, than it is recommended to use filter and water
purification devices.
* If the hardness level of the water that you use is below 8°dF (French standard for water
hardness), there is no need to use salt in your dishwasher. If this is the case, “No Salt
14 /35 EN
Dishwasher / User’s Manual
Preparation
Warning Indicator” (if any) illuminates
continuously on the panel of your machine.
If the water hardness adjustment is set to
level 1, the “No salt warning indicator” will
illuminate continuously although it is not
necessary to use salt. If you use salt under
this condition, salt will not be consumed
and the lamp will not illuminate.
If you move your house, it
is very important to make
the water hardness level
adjustment of your machine
according to the new location
you move in order to preserve
the washing efficiency.
If the water hardness level
of your machine is adjusted
previously, your machine will
display the last water hardness
level adjustment. Adjust the
new water hardness level of
your machine on basis of the
water hardness level of your tap
water.
C
C
Since different salt brands
in the market have different
particle sizes and since the
water hardness may vary,
dissolution of the salt in water
may take a couple of hours.
Therefore, Salt Indicator
remains on for a while after
adding salt into the machine.
Loose salt grains can cause rust
marks in your machine if not
rinsed away. Only fill salt just
before a programme is run.
Detergent
You can use powder or tablet detergent in
the machine.
Dishwasher / User’s Manual
C
C
Only use in the machine
the detergents produced
particularly for use with
dishwashers. We recommend
you not to use detergents that
contain chlorine and phosphate
as they are harmful for the
environment.
Contact the detergent producer
if the dishes are wet and/or
if you notice limescale spots
particularly on glasses after the
washing programme is over.
Adding detergent
C
A
Refer to the “Programme
Table” to determine the correct
amount of detergent for the
selected programme.
Do not put solvents into the
detergent dispenser. There is
the risk of explosion!
Put the detergent into the detergent
dispenser just before operating the
machine as illustrated below.
1. Push the latch to right to open the
detergent dispenser lid (A).
2. Put suggested amount of powder or
tablet detergent in the dispenser.
15/35 EN
Preparation
C
Inside the detergent dispenser,
there are level markings that
help you use appropriate
amount of detergent. When
brimful, detergent dispenser
will contain
40 cm³ of
detergent. Fill detergent up to
15 cm³ or 25 cm³ level marks
in the detergent dispenser
according to fullness of the
machine and/or soiling degree
of the dishes (1).
C
C
16 /35 EN
Tablet detergents
Tablet detergents exhibit water softening
and / or rinse aid effect in addition to
detergent effect. Some types of these
detergents
contain
special-purpose
also
washing chemicals such as glass and
stainless steel protectors.
If dishes have been waiting
for a long time and have
dried residues, fill the 5 cm³
compartment too (5).
3. Close the detergent dispenser lid by
pressing on it lightly. A “click” will be
heard when the lid is closed.
C
A
Excessive usage of powder
detergents will cause the
detergent not dissolve
completely and will also cause
scratches on the glassware.
In programmes with prewash
and at high temperature,
in which you use tablet
detergents, make sure that the
detergent dispenser lid is closed
firmly.
Use powder detergent in short
programmes without prewash
since the solubility of the tablet
detergent changes depending
on the temperature and time.
C
C
Tablet detergents give
satisfying results only under
certain usage conditions. The
best washing performance
in dishwashers is obtained
by using detergent, rinse
aid and water softening salt
individually.
Information about suitable
places (detergent dispenser,
basket etc.) in the dishwasher
to place the tablet can be found
amongst the usage instructions
on the packages of the tablet
detergents.
Tablet detergent types commonly found in
the market:
Dishwasher / User’s Manual
Preparation
2in1: Contains detergent, rinse aid or water
softening salt
3in1: Contains detergent, rinse aid and
water softening salt
4in1: Contains glass protectors in addition
to detergent, rinse aid and water softening
salt
5in1: Contains glass and stainless steel
protectors in addition to detergent, rinse aid
and water softening salt
Observe the instructions of the
detergent manufacturer on
the package when using tablet
detergents.
1. Open the lid of the rinse aid reservoir
by pressing its latch (B).
When you switch to powder
detergent from tablet detergent:
1. Make sure that salt and rinse aid
reservoirs are full.
2. Set the water hardness to the highest
level and perform an empty run.
3. After the empty washing cycle, review
the user manual and readjust the water
hardness level so as to suit the water
supply.
4. Make the appropriate rinse aid settings.
2. Fill the reservoir until “MAX” level.
3. Close the lid of the reservoir by
pressing on it lightly.
C
C
Depending on the model,
salt indicator and/or rinse aid
indicator must be enabled again
if they were disabled before.
C
Wipe clean any spilled rinse aid
outside the reservoir. Rinse
aid that spilled accidentally
will cause foaming and it will
eventually decrease
washing
performance.
Rinse aid
C
The rinse aid used in
dishwashers is a special
combination used to increase
drying efficiency and prevent
water or limescale stains on the
washed items. For this reason,
care must be paid to have rinse
aid in the rinse aid reservoir
and to use rinse aids produced
specially for dishwashers only.
Dishwasher / User’s Manual
4. Turn the rinse aid amount adjuster
manually to a position between 1 and
6 (4). If there are stains on tableware
items after washing, level must be
17/35 EN
Preparation
increased and if there is a blue trace
after wiping them by hand, it must be
decreased. This is set to position 4 as
factory default.
Items not suitable for washing in the
dishwasher
•• Never wash dishes soiled by cigarette
ash, candle remnants, polish, dyestuff,
chemicals, etc. in your dishwasher.
•• Do not wash iron alloy items in the
dishwasher. It can get corroded or
leave stains on other items.
•• Do not wash silverware and cutlery
with wooden or bone stems, glued
pieces, or pieces that are not resistant
to heat, as well as copper and tinplated containers in the dishwasher.
Decorative prints of chinaware
as well as aluminum and silver
items may get discoloured
or tarnished after washing
in the dishwasher just as it
happens in handwashing as
well. Some delicate glass types
and crystals may become dull in
time. We strongly recommend
you to check if the tableware
you are going to purchase is
suitable for washing especially
in the dishwasher.
C
••
••
••
Place thin, narrow pieces in the middle
sections of baskets if possible.
There are two separate baskets in
which you can place your dishes in the
dishwasher. Place the heavily soiled
and bigger items in the lower basket
and smaller, delicate and light items in
the upper basket.
Place the hollowed dishes such as
bowls, glasses and pans upside down
in the dishwasher. Thus, accumulation
of water in deep hollows is prevented.
To prevent possible injuries,
always place the sharp and
pointed dishes such as service
fork, bread knife, etc. upside
down so as their pointed ends
will face down or they will lie
horizontally in the dish basket.
A
Unload dishes in the lower basket first and
then the dishes in the upper basket.
Placing the dishes into the
dishwasher
You can use your dishwasher in the
optimum way with respect to energy
consumption and washing and drying
performance only if you place the dishes in
an orderly way.
•• Wipe away any coarse food
remnants (bones, seeds, etc.) on the
dishes before placing them in the
dishwasher.
18 /35 EN
Dishwasher / User’s Manual
Preparation
Suggestions for loading the dishwasher
Improper Loading Of Dishware
Lower basket
Upper basket
Improper Loading Of Dishware
Dishwasher / User’s Manual
19/35 EN
Preparation
Cutlery basket
Cutlery basket is designed to wash your
dishes such as knife, fork, spoon, etc. in an
efficient manner.
Since the cutlery basket can be moved (A,
B), you can create more space while placing
your dishes in the lower basket and free up
space for your dishes of different sizes.
Push the latches back into the correct
position.
Height setting with empty
basket
In this model, the height setting of the
upper basket may be changed using the
wheels which are mounted at two different
heights.
Release the latches on both the right and
left tracks of the upper basket by pushing
them outwards
Pull out the basket out completely.
Place the basket back into the tracks at the
desired height
20 /35 EN
Dishwasher / User’s Manual
Preparation
Collapsable lower basket
tines
The six piece foldable tines (A) located
at the lower basket of the machine are
designed for an easier placement of large
pieces such as pans, bowls, etc. You can
create larger spaces by folding each tines
individually or all of them at once.
C
Bringing the tines to the
horizontal position by holding
them from the tips may cause
them to bend. Therefore, it
will be appropriate to bring the
tines in the middle to horizontal
or vertical position by holding
them from their stems and
pushing in the direction of
arrow.
Upper basket height
adjustable rack
To bring the collapsible tines into horizontal
position, grab the tines from mid position
and push them in the directions of arrows
(B). To bring the tines back to vertical
position, just lift them up. Collapsible tines
will click into the latch again (C).
Dishwasher / User’s Manual
Use the lower and upper parts of the height
adjustable racks in the upper basket of
the machine by sliding them down or up
according to the heights of the glasses,
cups or etc. (A, B, C).
21/35 EN
5 Operating the product
1
12
1. Programme Indicator Light
2. Tablet Detergent Indicator
3. Salt Level Indicator Light
4. Time Delay Indicator
5. Start / Stop Indicator Light
6. Start / Stop Button
••
••
••
••
••
••
••
••
Push in the on/off button and check
that the programme indicator lights
come on.
Check the salt and rinse aid level
indicator lights before you start the
machine. If necessary add salt and
rinse aid.
Select the required programme by
referring to the programme chart.
Select the desired programme by
using the Programme Selection
Button.
You may use Half Load/Combi Tablet
button - Delayed Start Button
features as necessary.
Press start/pause/cancel button.
Close the door then programme starts.
An audio signal with an interval of 8
seconds warns you to switch your
machine off when the selected
washing programme ends. This
audible signal will warn you 10 times
before it turns off.
22 /35 EN
11 10
2 3 4 5
9 8
7 6
7. Time Delay Button
8. Rinse Aid Indicator Light
9. Half Load Indicator Light
10. Half Load / Tablet Detergent Button
11. Programme Selection Button
12. On/Off Button
A
A
••
••
Do not open the dishwasher
door whilst the appliance is in
operation. However, in case
the door is opened while the
machine is working, then a
safety mechanism ensures the
machine immediately stops.
Water may be very hot, so be
careful.
Care must be taken when
opening the door, as steam will
escape.
Press the on/off button after the
programme is completed. The
indicator lights will go off.
Unload the baskets - we recommend
to turn off the water tap when not in
use.
Dishwasher / User’s Manual
Operating the product
How to cancel the washing
programme
To cancel a programme while the machine
is operating:
•• Open the door.
! Care must be taken when
opening the door, as steam will
escape.
A
••
••
Press and hold start/pause/cancel
button for 3 seconds. The start /
stop indicator light will start flashing.
Close the door. The machine will drain
the water inside the machine for 45
seconds.
The programme is cancelled when
start/stop indicator light goes off.
Then, you can choose and start a new
programme.
Depending on the stage of the
programme you have cancelled,
there may be detergent residue
or rinse aid inside the machine
and on the load. Make sure the
items in the dishwasher are not
used before washing properly.
C
How to change the washing
programme
To change the programme selection while
the machine is operating:
•• Open the door.
Care must be taken when
opening the door, as steam will
escape.
A
••
••
Press start/pause/cancel button. The
indicator light will go off.
Select the new programme. Press
start/pause/cancel button. The
indicator light will be on and new
programme will start.
Dishwasher / User’s Manual
C
The new programme will NOT
start right from the beginning.
It will start from the stage last
carried out by the previous
programme selection.
Half Load Function
If you want to run your machine without
loading it completely, place your dishes into
the machine as you desire. Press the On/
Off button to turn on your machine. Press
the Half Load/Combi Tablet button after
selecting the desired program until Half
Load Indicator lights up, then press start/
pause/cancel button and close the door of
your machine. With the Half Load option
you can use every part of your lower and
upper baskets and you can save by using
less water and power.
Tablet Detergent Function
Depending on the hardness level of
the tap water, the Tablet Detergent
function allows obtaining a better drying
performance from the multi-purpose
detergents such as 2in1, 3in1, 4in1,
5in1, etc., called all-in-one tablets. The
programmes in which the tablet detergent
function can be enabled are indicated in
the Programme Data and Table of Average
Consumption Values. Tablet Detergent
Indicator lights when the Tablet Detergent
function is selected. Salt and Rinse Agent
indicators turn off when this function is
activated.
Time Delay
Using the Delayed Start button, you may
delay the starting time of your programme
up to 9 hours . After delaying the start,
press Start/Cancel button and close the
door of your machine. Once the delay time
23/35 EN
Operating the product
is over, the selected programme will start
automatically.
Cancelling the delay function
Keep the Start/pause/cancel button
pressed for 3 seconds. The selected delay
period will be cancelled.
As soon as the cancelling starts, the water
remaining in your machine will be drained
for 30 seconds due to safety reasons.
Warning Sound and Inner
Illumination Settings
(Depends on model)
You can use the submenu settings to
change the “Warning Sound” and “Inner
Illumination” settings you will use in your
machine.
To change the submenu settings:
Turn on your machine by pressing the On/
Off button while pressing and holding
Programme Selection and Start/Pause/
Cancel keys. Firstly, P1 indicator will light up
on the display. Select the desired setting
(P1, P2, P3, P4) by pressing the Programme
Selection key.
P1: Warning Sound (ON) - Inner illumination
(ON)
P2: Warning Sound (OFF) - Inner
illumination (ON)
P3: Warning Sound (OFF) - Inner
illumination (OFF)
P4: Warning Sound (ON) - Inner
illumination (OFF)
Save the selected setting by pressing
Start/Pause/Cancel key again.
24 /35 EN
Dishwasher / User’s Manual
Dishwasher / User’s Manual
17,6
1,7
12
1,02
Water (I)
Energy (kWh)
1,04
10,6
96
+
+
-
A+B
Medium
0,79
11,8
30
-
+
-
A **
Few
Suitable for lightly soiled daily dishes
that are scraped or pre-cleaned.
35 ºC
Mini 30
4
* Reference programme for testing institutes. The tests in accordance with EN 50242 must be carried out with a full water softener salt dispenser and a full
rinse aid reservoir, and using the test programme. The consumption values shown in the table were determined under standard conditions. Differences may
therefore occur under practical conditions. ** Only powder detergent use.
+
124
Dry
+
+
+
Wash
190
+
Duration (min)
A+B
+
High
A+B
Medium
Detergents
A=25 cm³/15 cm³ B=5 cm³
Prewash
Degree of Soiling
65 ºC
Daily washing program for normally
soiled dishes.
70 ºC
Suitable for heavily soiled dishes,
pots and pans.
50 ºC
Most economical washing program
for the medium soiled daily dishes
that are kept waiting.
Cleaning temperature
Clean&Shine
Intensive
Eco *
Programme name
3
2
1
Programme number
Programme Table
Operating the product
25/35 EN
6
Maintenance and cleaning
Service life of the product extends and
frequently faced problems decrease if it is
cleaned at regular intervals.
Unplug the product and turn off
the tap before attempting any
cleaning procedures.
A
C
C
Do not use abrasive substances
for cleaning.
Cleaning the filters
Clean the filters at least once a week in order
for the machine operates efficiently. Check if
food residues are left on the filters. If there
are food residues on filters, take them out
and clean well under running water.
1. Turn the micro filter (1) and coarse filter
(2) assembly counterclockwise and pull it
out from its seating (A).
Clean the filter and impellers at
least once a week to ensure the
machine operates efficiently.
Cleaning the outer surface
of the product
Clean the outer surface and door gaskets
of the product gently with a mild cleaning
material and damp cloth. Wipe the control
panel only with a damp cloth.
Cleaning the interior of the
machine
••
••
Clean the interior of the machine
and the tank by running a prewash
programme without detergent or
a long washing programme with
detergent based on the degree of
dirtiness.
If water has remained in the machine,
drain the water by performing the
procedures under the topic “Canceling
a programme”. If the water cannot
be discharged, clean any leftover
deposits that have piled up in the
bottom of the machine, blocking the
water path.
26 /35 EN
2. Pull out the metal / plastic filter (3) from
the seating (C).
3. Press the two pawls on the coarse filter
inwards and separate the coarse filter
from the assembly (B).
Dishwasher / User’s Manual
Maintenance and cleaning
4. Clean all three filters under tap water
by means of a brush.
5. Replace the metal/plastic filter.
6. Place the coarse filter into the
microfilter. Make sure that it is properly
seated. Turn the coarse filter clockwise
until a “click” sound is heard.
C
C
Do not use the dishwasher
without filter.
Cleaning the impellers
Clean the impellers at least once a week in
order for the machine operates efficiently.
Lower impeller
Check if the holes on the lower impeller (1)
are clogged. If they are clogged, remove
and clean the impeller. Pull the lower
impeller up to remove it (A, B).
Incorrect placement of the filters
will reduce washing efficiency.
Cleaning the hose filter
Damages on the machine that may be
caused by impurities coming from the
urban supply water or your own water
installation (such as sand, dirt, rust, etc.)
can be prevented by means of the filter
attached to the water inlet hose. Check the
filter and the hose regularly and clean them
if necessary.
1. Turn off the tap and remove the hose.
2. After taking out the filter, clean it
under running tap water.
3. Place the cleaned filter back to its seat
in the hose.
4. Install the hose to tap.
(depends on model)
Dishwasher / User’s Manual
27/35 EN
Maintenance and cleaning
Upper impeller
Check if the holes on the upper impeller (1)
are clogged. If they are clogged, remove
and clean the impeller. Turn its nut to left
to remove the upper impeller (A, B).
Make sure that the nut is tightened well
when installing the upper impeller.
28 /35 EN
Dishwasher / User’s Manual
7 Troubleshooting
Machine does not start.
• Power cable is unplugged. >>> Check if the power cable is plugged in.
• Fuse is blown. >>> Check the fuses in your house.
• Water is cut. >>> Make sure that the water inlet tap is open.
• Door of the machine is open. >>> Make sure that you have closed the door of the
machine.
• On / Off button is not pressed. >>> Make sure that you have turned on the machine by
pressing the On / Off button.
Dishes are not washed clean
• Dishes are not placed orderly in the machine. >>> Load the dishes as described in the
user manual.
• Selected programme is unsuitable. >>> Select a programme with a higher
temperature and cycle time.
• Impellers are stuck. >>> Prior to starting the programme, turn the lower and upper
impellers by hand to make sure that they rotate freely.
• Impeller holes are clogged. >>> Lower and upper impeller holes might be clogged
with food remnants such as lemon pips. Clean the impellers regularly as illustrated in
section “Cleaning and Care”.
• Filters are clogged. >>> Check if the filter system is clean. Clean the filter system
regularly as illustrated in section “Cleaning and Care”.
• Filters are installed incorrectly. >>> Check the filter system and make sure that it is
installed correctly.
• Baskets are overloaded. >>> Do not overload the baskets in excess of their capacity.
• Detergent is stored under unsuitable conditions. >>> If you are using powder
detergent, do not store the detergent package in humid places. Keep it in a closed
container if possible. For ease-of-storing, we recommend you to use tablet
detergents.
• Detergent is not sufficient. >>> If you are using powder detergent, adjust the amount
of detergent according to the soiling degree of your dishes and/or programme
definitions. We recommend you to use tablet detergents for optimum results.
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the
machine.
• Detergent dispenser lid is left open. >>> Make sure that the detergent dispenser lid is
closed tightly after adding detergent.
Dishes are not dry at the end of cycle
• Dishes are not placed orderly in the machine. >>> Place your dishes in a way that no
water will accumulate in them.
Dishwasher / User’s Manual
29/35 EN
Troubleshooting
•
•
•
•
Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the
machine.
Machine is unloaded right after the programme is over. >>> Do not unload your
machine right after washing process is completed. Slightly open the door and wait
for evacuation of the steam inside for a while. Unload the dishes after the pieces
cool down to a touchable level. Start unloading process from the lower basket. Thus,
dropping of water remained on a piece at upper basket onto the pieces at lower basket
is prevented.
Selected programme is unsuitable. >>> Since rinsing temperature is low at
programmes with short duration, drying performance will also be low. Select
programmes with longer duration for a higher drying performance.
Surface quality of the kitchen utensils is deteriorated. >>> Desired washing
performance can not be obtained on kitchen utensils with deteriorated surfaces and it
is not suitable to use such utensils in terms of hygiene as well. Also, water can not flow
easily on deteriorated surfaces. It is not recommended to wash such kitchen utensils in
dishwasher.
It is normal that drying complaints can be experienced with Teflon kitchen
utensils. It is associated with the structure of Teflon. Since the surface
tensions of Teflon and water are different, water droplets will remain as beads
on the Teflon surface.
C
Tea, cafe or lipstick stains remain on dishes.
• Selected programme is unsuitable. >>> Select a programme with a higher
temperature and cycle time.
• Surface quality of the kitchen utensils is deteriorated. >>> Tea and cafe stains or
other dye spots may not be cleaned in dishwasher when they have penetrated in
deteriorated surfaces. Desired washing performance can not be obtained on kitchen
utensils with deteriorated surfaces and it is not suitable to use such utensils in terms
of hygiene as well. It is not recommended to wash such kitchen utensils in dishwasher.
• Detergent is stored under unsuitable conditions. >>> If you are using powder
detergent, do not store the detergent package in humid places. Keep it in a closed
container if possible. For ease-of-storing, we recommend you to use tablet
detergents.
Lime traces remain on dishes and glassware gains a misty appearance
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the
machine.
• Water hardness setting is low or salt level is insufficient >>> Measure the hardness of
the supply water appropriately and check the water hardness setting.
• Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole
while adding salt. Make sure that the salt reservoir lid is tightly closed after finishing
30 /35 EN
Dishwasher / User’s Manual
Troubleshooting
the filling process. Run the prewash programme to remove the salt that spilled inside
the machine. Since the salt granules that will remain under the lid will dissolve during
prewash, causing the lid loosen, check the lid once again at the end of the programme.
There is a different odour in the machine
•
•
C
A new machine has a peculiar odour. It will fade out after a couple of washes.
Filters are clogged. >>> Check if the filter system is clean. Clean the filter system
regularly as illustrated in section “Cleaning and Care”.
Dirty dishes are kept in dishwasher for 2-3 days. >>> If you are not going to start the
machine right after you have put the dishes into it, remove the remnants on the dishes
and run the Prewash programme without detergent every 2 days. In such cases, do not
close the door of the machine completely in order to avoid odour build up in machine.
You can also use commercially available odour removers or machine cleaners.
Rust, discoloration or surface deterioration occurs on dishes
• Salt leakage exists. >>> Salt may cause deterioration and oxidation on metal surfaces.
Pay attention not to spill salt around the salt filling hole while adding salt. Make sure
that the salt reservoir lid is tightly closed after finishing the filling process. Run the
prewash programme to remove the salt that spilled inside the machine. Since the salt
granules that will remain under the lid will dissolve during prewash, causing the lid
loosen, check the lid once again at the end of the programme.
• Salty food remnants have remained on dishes for a long time. >>> If silverware soiled
with such foods will be kept waiting in machine, dirt must be removed by prewash or
dishes must be washed without being kept waiting.
• Electric installation is not grounded. >>>Check if your machine is connected to the
actual grounding line. Otherwise, the static electric created in the product causes arcs
on the surfaces of metal items creating pores, removing the protective cover on the
surface and causing discoloration.
• Intensive cleansers such as bleaches are used. >>> Protective cover on metal surfaces
gets damaged and looses its efficiency in time when it gets in contact with cleansers
such as bleach. Do not wash your dishes with bleach.
• Metal items particularly such as knives are used for purposes other then their intended
uses. >>> Protective cover on the edges of knives may get damaged when they are
used for purposes such as opening cans. Do not use metal kitchen utensils out of their
intended uses.
• Cutlery are made of low quality stainless steel. >>> Corrosion on such items is
inevitable; they should not be washed in dishwashers.
• Kitchen utensils that are already corroded are washed in dishwasher. >>> Rust on a
corroded item can migrate to other stainless steel surfaces and cause corrosion on
those surfaces as well. Such items should not be washed in dishwashers.
Dishwasher / User’s Manual
31/35 EN
Troubleshooting
Detergent remains in detergent dispenser.
• Detergent dispenser was damp when adding detergent. >>> Make sure that the
detergent dispenser is dried well prior to filling it with detergent.
• Detergent is added long before the washing process. >>> Pay attention to add
detergent shortly before start-up of the washing.
• Opening of the detergent dispenser lid is prevented during washing. >>> Place the
dishes in a way that will not prevent the detergent dispenser lid from opening and the
water going into the machine from impellers.
• Detergent is stored under unsuitable conditions. >>> If you are using powder
detergent, do not store the detergent package in humid places. Keep it in a closed
container if possible. For ease-of-storing, we recommend you to use tablet
detergents.
• Impeller holes are clogged. >>> Lower and upper impeller holes might be clogged
with food remnants such as lemon pips. Clean the impellers regularly as illustrated in
section “Cleaning and Care”.
Decorations and ornaments on kitchen utensils are being erased.
Decorated glasses and decorated lustre porcelains are not suitable for washing
in the dishwasher. Manufacturers of some glassware and porcelain tableware
items do not recommend washing such kitchen utensils in the dishwashers
either.
C
Dishes are scratched.
•
•
•
C
Kitchen utensils that contains or are made of aluminum should not be washed
in dishwasher.
Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole
while adding salt. Spilled salt can cause scratches. Make sure that the salt reservoir
lid is tightly closed after finishing the filling process. Run the prewash programme to
remove the salt that spilled inside the machine. Since the salt granules that will remain
under the lid will dissolve during prewash, causing the lid loosen, check the lid once
again at the end of the programme.
Water hardness setting is low or salt level is insufficient >>> Measure the hardness of
the supply water appropriately and check the water hardness setting.
Dishes are not placed orderly in the machine. >>> When placing the glasses and other
glassware into the basket lean them not against other dishes but the edges or racks of
the basket or the glass support tines. Striking of the glasses to each other or to other
dishes due to the impact of water during washing can cause breaks, or scratches on
their surfaces.
32 /35 EN
Dishwasher / User’s Manual
Troubleshooting
A smear remains on glasses that resembles milk stain which can not be
removed when wiped by hand. A bluish / rainbow appearance occurs
when the glass is pointed to light.
• Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid
when adding rinse aid.
• Corrosion has occurred on glass due to soft water. >>> Measure the hardness of the
supply water appropriately and check the water hardness setting. If your supply water
is soft (<5 dH), do not use salt. Choose programmes that wash in higher temperatures
(e.g. 60-65°C). You can also use glass protective detergents that are commercially
available.
Foam forms in the machine.
• Dishes are washed with hand-wash detergent by hand but not rinsed before placing
them into the machine. >>> Hand-wash detergents do not contain antifoam. There is
no need to hand-wash the dishes before placing them into the machine. Removing the
coarse soil on the dishes under tap water, with a tissue paper or fork will be sufficient.
• Rinse aid has spilled into the machine when adding rinse aid. >>> Take care that rinse
aid is not spilled in the machine when you are filling it. Clean any spilled rinse ait with
the help of a tissue paper/towel.
• Lid of the rinse aid reservoir is left open. >>> Make sure that the lid of the rinse aid
reservoir is closed after adding rinse aid.
Kitchen utensils are broken.
• Dishes are not placed orderly in the machine. >>> Load the dishes as described in the
user manual.
• Baskets are overloaded. >>> Do not overload the baskets in excess of their capacity.
Water remains in the dishwasher at the end of the programme.
• Filters are clogged. >>> Check if the filter system is clean. Clean the filter system
regularly as illustrated in section “Cleaning and Care”.
• Discharge hose is clogged/blocked. >>> Check the discharge hose. If necessary,
remove the discharge hose, clear the blockage and insert is as illustrated in the user
manual.
C
If you cannot eliminate the problem although you follow the instructions in
this section, consult your dealer or the Authorised Service Agent. Never try to
repair a nonfunctional product yourself.
Dishwasher / User’s Manual
33/35 EN
8 Guarantee
Guarantee for Refrigeration,
Cooking Appliances, Washing
Machines & Dishwashers.
Please visit the “Support” section on
the Beko website at
www.beko.co.uk to register your
two years warranty.
Your new Beko product is guaranteed
against the cost of breakdown repairs for
two years from the date of the original
purchase.
What is covered?
•• Repairs necessary as a result of faulty
materials, defective components or
manufacturing defect.
•• The cost of functional replacement
parts, but excluding consumable
items.
•• The labour costs of a Beko approved
repairer to carry out the repair
What is not covered?
•• Transit, delivery or accidental damage
or misuse and abuse.
•• Cabinet or appearance parts, including
knobs, flaps, handles or container lids.
•• Accessories or consumable items
including but not limited to, ice trays,
scrapers, cutlery baskets, filters and
light bulbs.
•• Repairs required as a result of
unauthorised repair or inexpert
installation that fails to meet the
requirements contained in the user
instruction book.
•• Repairs to products used on
commercial or non-residential
household premises.
•• Loss of frozen food in freezers or
fridge/freezers. (Food loss insurance
34 /35 EN
is often included within your
household contents insurance policy,
or may be available separately from
your retailer).
Important notes.
•• Your Beko product is designed and
built for domestic household use only.
•• The guarantee will be void if the
product is installed or used in
commercial or non-residential
domestic household premises.
•• The product must be correctly
installed, located and operated in
accordance with the instructions
contained in the User Instructions
Booklet provided.
•• Professional installation by a qualified
Electrical Domestic Appliance Installer
is recommended for all Washing
Machines, Dishwashers and Electric
Cookers
•• Gas Cookers must only be installed by
a Gas safe (or BORD GAIS) registered
Gas Installer.
•• The guarantee is given only within the
boundaries of the United Kingdom and
the Republic of Ireland.
•• The guarantee is applicable only to
new products and is not transferable
if the product is resold.
•• Beko disclaims any liability for
incidental or consequential damages.
•• The guarantee does not in anyway
diminish your statutory or legal rights.
•• The product guarantee does not
cover damages to plates,glass ware,
cutlery, crockery and also damage to
the product itself as a result of using
these “Three-in-one”, “Two-in-one”
detergents.
Dishwasher / User’s Manual
Guarantee
Please keep your purchase receipt or other proof of purchase in a safe
place; you will need to have it should the product require attention under
guarantee.
You should also complete the details below; it will help us assist you when requesting
service. (The model number is printed on the Instruction Booklet and the serial number is
printed on the Rating Label affixed to the appliance)
Model No:
Serial No:
Retailer:
Date of purchase:
For service under guarantee simply telephone the appropriate number below
UK Mainland & Northern Ireland
Fridges & Freezers
0845 6004903
Electric Cookers 0845 6004902
Gas&Dual Fuel Cookers
0845 6004905
Washing Machines
0845 6004906
& Dishwashers
or
or
or
or
0345 6004903
0345 6004902
0345 6004905
0345 6004906
Republic of Ireland
All Refrigeration, All Cookers 01 862 3411
Washing Machines & Dishwashers
Before requesting service please check the trouble-shooting guide in the
Operating Instructions as a charge may be levied where no fault is found
even though your product may still be under guarantee.
Service once the manufacturers guarantee has expired.
If you have purchased an extended guarantee please refer to the instructions contained
within the extended guarantee agreement document. Otherwise please call the
appropriate number above where service can be obtained at a charge.
Should you experience any difficulty in obtaining service please contact the Beko
Customer Help-Line.
Tel: 0845 6004911
e-mail: service@beko.co.uk
Beko plc, Beko House, 1 Greenhill Crescent, Watford Hertfordshire,
WD18 8QU, UK
www.beko.co.uk
15 0228 0100-REV-AA-04/2015
Dishwasher / User’s Manual
35/35 EN