Jura GIGA X8
Operating & cleaning instructions
My Coffee Shop Pty Ltd
ACN 102 850 037
clientservices@mycoffeeshop.com.au
1473-1475 Malvern Road
Glen Iris VIC 3146
ph: 03 9946 4160
fax: 02 9629 8046
1300 365 487
93/1-5 Harwood Street
Pyrmont NSW 2009
ph: 02 9034 6580
fax: 02 9629 8046
www.mycoffeeshop.com.au
Control elements
Control elements
9
1
2
10
3
11
4
12
13
5
14
15
6
7
8
1
2
3
4
5
6
7
8
4
Bean container with aroma preservation
cover
Bean container status indicator
Water tank cover
Water tank
Power switch and plug-in mains cable (back of the machine)
Coffee grounds container
Drip tray
Cup grille
9
10
11
12
13
14
15
Filler funnel for ground coffee
Ventilation slats (Venti Ports)
Storage compartment cover
Measuring spoon for ground coffee
Height- and width-adjustable dual spout
Splash guard
Height-adjustable hot-water spout
Control elements
1
2
3
4
5
Top of the machine
1
Q On/Off button
2 g Rotary Switch
3 O P button (programming)
Front
4 Display
5 Multi-function buttons (button function
depends on what is shown in the display)
Back of the machine
1
Service cover (open by pressing with your
finger)
2 Locking device
3
4
Sliding catch
Service socket (underneath cover)
5
Cleaning Products – GIGA (Tank water)
Daily
See procedure – Daily milk system clean
Must be performed at the end of each day just before the machine is turned off
Purpose: To ensure the milk system is clean overnight so milk does not go off blocking the pathways
Use Cafetto daily milk cleaner – 1 litre bottle (Prod no. 71144)
Weekly
See procedure – Weekly milk system clean
Performed once per week
Purpose: To remove any build up of milk fats to ensure the milk frother works correctly
Use Cafetto weekly milk cleaner – 1 litre bottle (Prod no. 71145)
When prompted
Clean machine – See procedure (Coffee system clean)
Performed only when prompted (Every 220 coffees)
Purpose: Removes coffee oil from the brewing unit and coffee path to maintain the quality of the coffee
Use Jura cleaning tablets
- 6 pk (Prod no. 71111)
- 25 pk (Prod no. 71112)
See procedures – Changing the filter or Descaling the machine
Perform a filter change or descale only when prompted.
Purpose: Protects against lime scale build up inside the machine maintaining water & steam paths
9 pk – Prod no. 71121
Prod no. 71134
36 pk – Prod no. 71122
My Coffee Shop Pty Ltd
ACN 102 850 037
clientservices@mycoffeeshop.com.au
1473-1475 Malvern Road
Glen Iris Vic 3146
ph: 03 9946 4160
fax: 02 9629 8046
1300 365 487
93/1-5 Harwood Street
Pyrmont NSW 2009
ph: 02 9034 6580
fax: 02 9629 8046
www.mycoffeeshop.com.au
Weekly milk system clean
Complete this procedure once a week after the daily milk system clean
1. Remove the splash guard. (Fig 1)
2. Remove spout cover. Press the black releasing buttons and lift. (Fig 2 – 3)
3. Pull the milk outlet down (Fig 4) and the milk hose out. (Fig 5)
4. Remove the auto frother by pulling it towards you. (Fig 6)
5. Separate the auto frother into 6 parts. (Fig 7)
6. Soak all 6 parts in 250ml of warm water & 15ml of Cafetto red weekly solution (71145) for 20 min.
7. Remove the parts from solution and rinse under cold tap water.
8. Check that water flows through the milk outlet freely. (Fig 8)
9. Re-assemble the auto frother ensuring the arrow tips line up. (Fig 9)
10. Refit the auto frother, spout cover and splash guard.
Important:
The splash guard protects the coffee spout slide ribbon behind it from milk splatters and must be fitted. Be
careful not to press on the coffee spout slide ribbon as it can be damaged.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 6
Figure 7
Figure 8
Figure 9
My Coffee Shop Pty Ltd
ACN 102 850 037
clientservices@mycoffeeshop.com.au
1473-1475 Malvern Road
Glen Iris VIC 3146
ph: 03 9946 4160
fax: 02 9629 8046
1300 365 487
Figure 5
93/1-5 Harwood Street
Pyrmont NSW 2009
ph: 02 9034 6580
fax: 02 9629 8046
www.mycoffeeshop.com.au
GIGA X8 Professional
Daily milk system clean
Precondition: »Please select
product:«
5
1x 15 ml
9
1
6
10
»Maintenance status (1/5)«
2
Equipment required:
Next
JURA Cappuccino Cleaner
1000 ml (Art. 62536)
»Milk system is being rinsed.«
»Milk system cleaning complete.«
7
Clean the
milk system
»Please select product:«
3
Next
Start
»Milk system is being rinsed.«
»Water for cleaning milk system.«
2x
8
»Cleaning agent for milk
system.«
c
4
J
These short instructions do not replace
the ‘GIGA X8 Professional Instructions for
Use’. Make sure you read and observe the
safety information and warnings first in
order to avoid hazards.
250 ml
250 ml
JURA Elektroapparate AG, Kaffeeweltstraße 10, CH-4626 Niederbuchsiten, www.jura.com
GIGA X8 Professional
Coffee system clean
Approximate duration 20 min.
Precondition: »Clean machine.«
(or: »Please select product:«)
5
9
13
1
»Machine is being cleaned.«
»Add cleaning tablet.«
6
»Machine is being cleaned.«
»Empty coffee grounds
container.«
10
»Maintenance status (1/5)«
14
2
Equipment required:
Clean
2-phase cleaning tablets
Tub of 25 (Art. 62535)
7
Pack of 6(Art. 62715)
11
15
3
»Press the Rotary Switch.«
Start
2x
8
12
16
»Empty coffee grounds
container.«
4
J
These short instructions do not replace
the ‘GIGA X8 Professional Instructions for
Use’. Make sure you read and observe the
safety information and warnings first in
order to avoid hazards.
»Press the Rotary Switch.«
»Clean« / »Cleaning complete.«
»Please select product:«
JURA Elektroapparate AG, Kaffeeweltstraße 10, CH-4626 Niederbuchsiten, www.jura.com
GIGA X8 Professional
Changing the filter
Precondition: »Change the filter«
5
9
13
6
10
14
1
»Maintenance status (1/5)«
2
Equipment required:
CLARIS Pro Blue filter cartridge
Change the filter
Pack of 4 (Art. 69670)
»Filter is being rinsed.«
»Empty drip tray.«
7
»Please select product:«
11
3
Start
2x
»Change filter.« / »Press the
Rotary Switch.«
»Change the filter.« / »Filter
rinsing complete.«
8
12
4
J
These short instructions do not replace
the ‘GIGA X8 Professional Instructions for
Use’. Make sure you read and observe the
safety information and warnings first in
order to avoid hazards.
JURA Elektroapparate AG, Kaffeeweltstraße 10, CH-4626 Niederbuchsiten, www.jura.com
GIGA X8 Professional
Descaling the machine
Precondition: »Decalcify machine.«
(or »Please select product:«)
Approximate duration 50 min.
1
5
9
13
6x
1000 ml
6
10
14
»Maintenance status (1/5)«
2
Equipment required:
Descaling tablets
Tub of 36 (Art. 70751)
»Press the Rotary Switch.«
7
Pack of 3 (Art. 61848)
11
Descale
15
3
Start
»Pour descaling agent into water
tank.«
2x
»Fill water tank.«
12
16
8
»Empty drip tray.«
4
J
These short instructions do not replace
the ‘GIGA X8 Professional Instructions for
Use’. Make sure you read and observe the
safety information and warnings first in
order to avoid hazards.
c
»Machine is being descaled.«
»Empty drip tray.«
JURA Elektroapparate AG, Kaffeeweltstraße 10, CH-4626 Niederbuchsiten, www.jura.com
17
21
»Press the Rotary Switch.«
22
18
»Descale« / »Descaling complete.«
19
»Please select product:«
»Machine is being descaled.«
»Empty drip tray.«
20
Troubleshooting:
Milk flow
No milk
Solution:
Spluttering milk
Not filling cups
Froth milk is flat
1. Remove the splash guard. (Fig 1)
2. Press the black releasing buttons on the sides of the spout cover and lift the cover off. (Fig 2 – 3)
3. If the flat milk is flowing normally and the problem is with the froth milk only, replace the air suction (Fig 4), refit the
cover and test the milk again. If the problem has been solved, purchase spare air suction (Part no. 70008). If the
problem has not been solved go to step 4.
4. Remove the auto frother by pulling the milk outlet down (Fig 5) and pulling the milk hose connector out (Fig 6). Now you
will be able to remove the auto frother by pulling it towards you (Fig 7).
5. Separate the auto frother into 6 parts (Fig 8).
6. Soak 6 parts (Fig 8) in 250ml of warm water and 15 ml of Cafetto red weekly cleaning solution (71145) for 30 min.
7. Remove the parts from the solution and rinse under tap water.
8. Clean the milk, air and steam paths using the cleaning brushes. See 2 x milk path holes in Fig 11.(Fig 9 – 13)
9. Pour tap water into the top of the milk outlet (Fig 14). If water does not pour from the two outlets as shown, soak it for
another 30 min and retest. If you are not able to clean the outlet, order in another outlet. (Part no. 70007)
10. Re-assemble the auto frother ensuring that the arrow tips line up. (Fig 15)
11. Refit the auto frother, cover, splash guard and test. If the problem has not been solved ph 1300 365 487.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9 (Milk path)
Figure 10 (Milk path)
Figure 11 (Milk path)
Figure 12 (Air path)
Figure 13 (Steam path)
Figure 14 (Test outlet)
Figure 15
Welcome to My Coffee Shop!
Our hours of operation are Monday – Friday 9am to 5pm. Or you can visit us at your
convenience on the web at www.mycoffeeshop.com.au. Orders and service requests can
be placed by:
Phone:
1300 365 487
Fax:
02 9692 8046
E-mail:
clientservices@mycoffeeshop.com.au
Online:
www.mycoffeeshop.com.au/shop-online
Remittances:
accountsreceiveable@mycoffeeshop.com.au
Service enquiries:
servicecentre@mycoffeeshop.com.au
Next business day delivery via Toll Priority to:
Adelaide Canberra Melbourne Sydney
for orders placed by 1.30pm
Please note you will be advised when
ordering if delivery charges apply to your
order
Once again, welcome to My Coffee Shop and remember we are here to help. If you have
any questions please don’t hesitate to contact us.
We look forward to exceeding your expectations and making your day easier and more
enjoyable.
Kind regards,
My Coffee Shop
Client Services
My Coffee Shop Pty Ltd
My Coffee Shop Pty Ltd
ACN 102 850 037
1473 - 1475 Malvern Rd
Glen Iris VIC 3146
ph: 03 9946 4160
fax: 02 9692 8046
93 / 1-5 Harwood Street
Pyrmont NSW 2009
ph: 02 9034 6580
fax: 02 9692 8046