Extractor hood
[en] Instruction manual
I90CN48W0, I92CN48W0
Ú Table of contents
e[nuoIrs]ctimanul
Important safety information.....................................................3
Environmental protection ..........................................................4
Saving energy......................................................................................4
Environmentally-friendly disposal.....................................................4
Operating mode..........................................................................4
Circulating-air mode ...........................................................................4
Operating the appliance ............................................................5
Controls ................................................................................................5
Switching the appliance on and off.................................................5
Intensive setting ..................................................................................5
Intermittent mode ................................................................................6
Run-on function ...................................................................................6
Lighting .................................................................................................6
Cleaning and maintenance ........................................................6
Saturation display ...............................................................................7
Removing and installing the filter ....................................................7
Trouble shooting ........................................................................ 8
LED lights .............................................................................................8
Malfunction table.................................................................................8
After-sales service ..................................................................... 9
Special accessories ................................................................... 9
Produktinfo
Additional information on products, accessories, replacement
parts and services can be found at
www.neff-international.com and in the online shop
www.neff-eshop.com
Important safety information
Read these instructions carefully. Only then will you be able to
operate your appliance safely and correctly. Retain the
instruction manual and installation instructions for future use or
for subsequent owners.
The appliance can only be used safely if it is correctly installed
according to the safety instructions. The installer is responsible
for ensuring that the appliance works perfectly at its installation
location.
This appliance is intended for domestic use and the household
environment only. The appliance is not intended for use
outside. Do not leave the appliance unattended during
operation. The manufacturer is not liable for damage which is
caused by improper use or incorrect operation.
This appliance is intended for use up to a maximum height of
2000 metres above sea level.
This appliance may be used by children over the age of 8 years
old and by persons with reduced physical, sensory or mental
capabilities or by persons with a lack of experience or
knowledge if they are supervised or are instructed by a person
responsible for their safety how to use the appliance safely and
have understood the associated hazards.
: Risk of fire!
■
Risk of fire!
■
Risk of fire!
■
Risk of fire!
■
Risk of fire!
■
Children must not play with, on, or around the appliance.
Children must not clean the appliance or carry out general
maintenance unless they are at least 8 years old and are being
supervised.
Keep children below the age of 8 years old at a safe distance
from the appliance and power cable.
Check the appliance for damage after unpacking it. Do not
connect the appliance if it has been damaged in transport.
Only a licensed professional may connect appliances without
plugs. Damage caused by incorrect connection is not covered
under warranty.
This appliance is not intended for operation with an external
clock timer or a remote control.
: Danger of suffocation!
Packaging material is dangerous to children. Never allow
children to play with packaging material.
Grease deposits in the grease filter may catch fire.
Replace the grease filter at least every two months.
Never operate the appliance without the grease filter.
Grease deposits in the grease filter may catch fire. Never
work with naked flames close to the appliance (e.g.
flambéing). Do not install the appliance near a heatproducing appliance for solid fuel (e.g. wood or coal) unless
a closed, non-removable cover is available. There must be no
flying sparks.
Hot oil and fat can ignite very quickly. Never leave hot fat or
oil unattended. Never use water to put out burning oil or fat.
Switch off the hotplate. Extinguish flames carefully using a lid,
fire blanket or something similar.
When gas burners are in operation without any cookware
placed on them, they can build up a lot of heat. A ventilation
appliance installed above the cooker may become damaged
or catch fire. Only operate the gas burners with cookware on
them.
Operating several gas burners at the same time gives rise to
a great deal of heat. A ventilation appliance installed above
the cooker may become damaged or catch fire. Never
operate two gas burners simultaneously on the highest flame
for longer than 15 minutes. One large burner of more than
5 kW (wok) is equivalent to the power of two gas burners.
: Risk of burns!
The accessible parts become very hot when in operation. Never
touch hot parts. Keep children at a safe distance.
: Risk of injury!
■
Components inside the appliance may have sharp edges.
Wear protective gloves.
Items placed on the appliance may fall down. Do not place
any objects on the appliance.
The light emitted by LED lights is very dazzling, and can
damage the eyes (risk group 1). Do not look directly into the
switched on LED lights for longer than 100 seconds.
Risk of injury!
■
Risk of injury!
■
3
: Risk of electric shock!
■
A defective appliance may cause electric shock. Never switch
on a defective appliance. Unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.
Incorrect repairs are dangerous. Repairs may only be carried
out and damaged power cables replaced by one of our
trained after-sales technicians. If the appliance is defective,
unplug the appliance from the mains or switch off the circuit
breaker in the fuse box. Contact the after-sales service.
Do not use any high-pressure cleaners or steam cleaners,
which can result in an electric shock.
Risk of electric shock!
■
Risk of electric shock!
■
Causes of damage
Caution!
Risk of damage due to corrosion. Always switch on the
appliance while cooking to avoid condensation. Condensate
can produce corrosion damage.
Risk of damage due to ingress of humidity into the electronic
circuitry. Never clean operator controls with a wet cloth.
Surface damage due to incorrect cleaning. Clean stainless
steel surfaces in the direction of the grain only. Do not use any
stainless steel cleaners for operator controls.
Surface damage due to strong or abrasive cleaning agents.
Never use strong and abrasive cleaning agents.
Risk of damage from returning condensate. Install the exhaust
duct in such a way that it falls away from the appliance slightly
(1° slope).
Environmental protection
Your new appliance is particularly energy-efficient. Here you
can find tips on how to save even more energy when using the
appliance, and how to dispose of your appliance properly.
Saving energy
■
■
■
■
During cooking, ensure that there is a sufficient supply of air
so that the extractor hood can work efficiently and with a low
level of operating noise.
Adjust the fan speed to the intensity of the cooking fumes.
Only use intensive mode where this is required. A lower fan
speed means that less energy is consumed.
If there are intensive cooking fumes, select a higher fan
speed in good time. If cooking fumes have already spread in
the kitchen, the extractor hood must be operated for longer.
Switch off the extractor hood if you no longer require it.
Operating mode
You can use this appliance in circulating-air mode.
Circulating-air mode
The air which is drawn in is cleaned by the
grease filters and an activated carbon filter and
conveyed back into the kitchen.
Note: To bind odours in circulating-air mode, you must install
an activated carbon filter. The different options for operating the
appliance in circulating-air mode can be found in the brochure.
Alternatively, ask your dealer. The required accessories are
available from specialist outlets, from customer service or from
the Online Shop. The accessory numbers can be found at the
end of the instructions for use.
4
■
■
Switch off the lighting if you no longer require it.
Clean and, if required, replace the filter at regular intervals in
order to increase the effectiveness of the ventilation system
and to prevent the risk of fire.
Environmentally-friendly disposal
Dispose of packaging in an environmentally-friendly manner.
This appliance is labelled in accordance with
European Directive 2012/19/EU concerning used
electrical and electronic appliances (waste
electrical and electronic equipment - WEEE). The
guideline determines the framework for the return
and recycling of used appliances as applicable
throughout the EU.
Operating the appliance
Note: Switch on the extractor hood when you start cooking and
switch it off again several minutes after you have finished
cooking. This is the most effective way of removing the kitchen
fumes.
Operating buttons
Controls
Button
Explanation
6
Switches the lighting on and off
#
Switches off the extractor hood/switches on
fan setting 1
92
Switches on fan setting 2
Note: The remote control requires AAA/LR03/1.5 V batteries.
Refer to the Changing the batteries in the remote control
section for instructions on how to insert the batteries.
83
Switches on fan setting 3
˜
Switches on intensive mode
Note: Point as accurately as you can with the remote control to
the infrared receiver on the extractor hood's control panel.
Switching the appliance on and off
Use the remote control to set and adjust the various different
functions of your appliance.
Note: Heat and penetrating moisture may damage the remote
control. Never expose the remote control to intense heat or
moisture.
Note: Always adjust the setting according to the current
conditions. To eliminate strong cooking smells, select a high
fan setting.
Switching on the appliance
Remote control
Press the ¶ button on the remote control or the # button on
the extractor hood's control panel.
The extractor hood starts at power setting 1.
The # button lights up.
Selecting the fan setting
Press the @ or A button on the remote control or the #, 9 2
or 8 3 button on the extractor hood's control panel for the fan
setting you require.
Operating buttons
The # button will light up when power setting 1 has been
selected.
Button
Explanation
The # and 9 2 buttons will light up when power setting 2 has
been selected.
K
Switches on the run-on function/intermittent
function
The #, 9 2 and 8 3 buttons will light up when power
setting 3 has been selected.
@
Increases the power setting
Switching off the appliance
¶
Switches the extractor hood on and off
<
Switches the lighting on and off
Press the ¶ button on the remote control or the # button on
the extractor hood's control panel.
A
Reduces the power setting
Intensive setting
†
Switches on intensive mode
Activate intensive mode to eliminate strong smells and odours.
In this mode, the extractor hood operates at its maximum fan
setting for a short time. After a short time, it automatically
switches back to a low setting.
Extractor hood's control panel
Switching on
Press the † button on the remote control or the ˜ button on
the extractor hood's control panel.
The #, 9 2 and 8 3 buttons will light up and the ˜ button will
flash. Intensive mode is activated.
Note: After 6 minutes, the extractor hood automatically
switches back to the fan setting that was set beforehand.
(
Infrared receiver
0
Operating buttons
8
Saturation indicator
Switching off
Press the † button on the remote control or the # button on
the extractor hood's control panel.
5
Intermittent mode
The intermittent function automatically switches on the extractor
hood for 10 minutes every hour. After 24 hours, this function
switches itself off again.
Note: If intensive mode or the run-on function has been
activated, the intermittent function will not be available.
Switching on
Press and hold the K button on the remote control or the 8 3
button on the extractor hood's control panel.
1. Select the power setting.
2. Press the K button on the remote control or press and hold
the 9 2 button on the extractor hood's control panel.
The button for the selected power setting will flash on the
extractor hood's control panel. The fan will continue to run at
this setting for 30 minutes and then switch off automatically
once this time has elapsed. If the lighting has been switched
on, this will also be switched off once the run-on time has
elapsed.
Switching off
The # button on the extractor hood's control panel flashes.
The intermittent function is now on. The extractor hood starts at
power setting 1.
Press the ¶ or 9 button on the remote control or the # button
on the extractor hood's control panel.
Switching off
Lighting
Press the ¶ button on the remote control or the # button on
the extractor hood's control panel.
This will deactivate the run-on function immediately.
The lighting will work even if the extractor hood is switched off.
This switches off the intermittent function.
Switching on
Run-on function
Press the < button on the remote control or the 6 button on
the extractor hood's control panel.
The run-on function allows the extractor hood to continue
running for a few minutes after it has been switched off. This
eliminates any remaining cooking smells. The extractor hood
will then switch itself off automatically.
Switching on
The 6 button on the extractor hood's control panel will light up.
Switching off
Press the < button on the remote control or the 6 button on
the extractor hood's control panel.
Note: If intensive mode or intermittent operation has been
activated, the run-on function will not be available.
Cleaning and maintenance
: Risk of burns!
The appliance becomes hot during operation. Allow the
appliance to cool down before cleaning.
: Risk of electric shock!
Follow all instructions and warnings included with the cleaning
agents.
Area
Cleaning agent
Stainless steel
Hot soapy water:
Clean with a dish cloth and then dry
with a soft cloth.
Penetrating moisture may result in an electric shock. Clean the
appliance using a damp cloth only. Before cleaning, pull out the
mains plug or switch off the circuit breaker in the fuse box.
Clean stainless steel surfaces in the
grind direction only.
: Risk of electric shock!
Special stainless steel cleaning products are available from our after-sales
service or from specialist retailers.
Apply a very thin layer of the cleaning
product with a soft cloth.
Do not use any high-pressure cleaners or steam cleaners,
which can result in an electric shock.
Cleaning agents
To ensure that the different surfaces are not damaged by using
the wrong cleaning agent, observe the information in the table.
Do not use any of the following:
■
Harsh or abrasive cleaning agents,
■
Cleaning agents with a high alcohol content,
■
Hard scouring pads or cleaning sponges,
■
High-pressure cleaners or steam cleaners.
Painted surfaces
Hot soapy water:
Clean using a damp dish cloth and dry
with a soft cloth/towel.
Do not use any stainless steel cleaners.
Aluminium and plas- Glass cleaner:
tic
Clean with a soft cloth.
Glass
Glass cleaner:
Clean with a soft cloth. Do not use a
glass scraper.
Controls
Hot soapy water:
Clean using a damp dish cloth and dry
with a soft cloth/towel.
Wash new sponge cloths thoroughly before use.
Risk of electric shock caused by penetrating moisture.
Risk of damage to the electronics from
penetrating moisture. Never clean
operating controls with a wet cloth.
Do not use any stainless steel cleaners.
6
Saturation display
When the metal grease filters or activated charcoal filters are
saturated, the corresponding symbol will flash:
■
■
■
Metal grease filter: The F indicator and the # button light up
Activated charcoal filter: The F indicator and the 8 3 button
light up
Metal grease filter and activated charcoal filter: The
F indicator and the # and 8 3 buttons light up
Do not wait any longer to clean the metal grease filters or
replace or regenerate the activated charcoal filters.
3. Remove the activated charcoal filter from the metal grease
filter.
4. Clean the metal grease filter and the filter cover.
Removing and installing the filter
5. After removing the filters, clean the inside of the appliance.
The filter must be serviced regularly in order to guarantee
efficient filtration of odours and grease.
Replacing or regenerating the activated charcoal filters
Metal grease filter
The metal grease filters must be cleaned every 100 operating
hours or at least every two months.
: Risk of fire!
Grease deposits in the grease filter may catch fire.
Clean the grease filter at least every 2 months.
Never operate the appliance without the grease filter.
Activated charcoal filters
Activated charcoal filters trap the odour-causing compounds in
cooking smells. They are only used for circulating-air mode.
Notes
■ The activated charcoal filters are included with the appliance.
When the activated charcoal filters need to be replaced, they
can be obtained from specialist retailers, from our after-sales
service or from our online shop.
■
Only use genuine replacement filters. This will ensure that the
appliance performs optimally.
1. Remove the holder on the rear of the metal grease filter and
take out the activated charcoal filter.
The activated charcoal filters must be replaced or regenerated
regularly. The saturation indicator on your appliance will tell you
how frequently this needs to be done.
Removing metal grease filter
The metal grease filters filter the grease out of kitchen steam.
To keep them in good working order, the filters should be
cleaned at least every two months.
1. Pull the filter cover downwards.
2. Clean the appliance.
Note: Make sure that the filter cover does not swing down
suddenly.
3. Clean the metal grease filters.
4. Secure the new activated charcoal filter using the holder on
the rear of the metal grease filter.
2. Open the locking mechanism on the metal grease filter and
remove the filter from the holder.
Regenerating the activated charcoal filter
Note: The activated charcoal filter can be regenerated up to
four times.
1. Remove the activated charcoal filter.
2. Heat the activated charcoal filter in an oven heated to 100 °C
for 60 minutes.
3. Leave the activated charcoal filter to cool down.
4. Fit the activated charcoal filter.
Notes
■
■
■
When you do this, take hold of the metal grease filter from
underneath with your other hand. Make sure that the metal
grease filter does not fall and damage the hob.
Fat may collect in the bottom of the filter holder. Hold the
filter holder at an angle to prevent fat from dripping out.
Cleaning the metal mesh grease filters
Notes
■ Do not use any aggressive, acidic or alkaline cleaning
agents.
■
Do not remove the cover plate from the inside of the
appliance.
■
When cleaning the metal mesh grease filters, also clean the
holder for the metal mesh grease filters in the appliance
using a damp cloth.
The metal mesh grease filters can be cleaned in the
dishwasher or by hand.
7
By hand:
Installing the metal mesh grease filter
Note: You can use a special grease solvent for stubborn dirt. It
can be ordered via the Online Shop.
1. Insert metal grease filter.
2. Fold the metal grease filter up and click it into place.
■
Soak the metal mesh grease filters in a hot soapy solution.
3. Fold the filter cover upwards.
■
Clean the filters with a brush and then rinse them thoroughly.
Leave the metal mesh grease filters to drain.
Note: Make sure that the filter cover closes properly.
■
In the dishwasher:
Note: If the metal mesh grease filters are cleaned in the
dishwasher, slight discolouration may occur. This has no effect
on the function of the metal mesh grease filters.
■
■
Do not clean heavily soiled metal mesh grease filters together
with utensils.
Place the metal mesh grease filters loosely in the dishwasher.
The metal mesh grease filters must not be wedged in.
Resetting the saturation displays
Once you have cleaned or replaced the relevant filters, reset
the saturation indicator to stop the symbols from flashing.
Make sure that the extractor hood and the lighting have been
switched off.
Press and hold the # button until indicator F flashes three
times.
This resets the saturation indicators.
Trouble shooting
Malfunctions often have simple explanations. Please read the
following notes before calling the after-sales service.
Replacing the batteries in the remote control
: Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out and damaged power cables replaced by one of our trained
after-sales technicians. If the appliance is defective, unplug the
appliance from the mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.
LED lights
Defective LED lights may be replaced by the manufacturer, their
after-sales service or a qualified technician (electrician) only.
1. Push in the lug.
Malfunction table
3. Remove the batteries.
Problem
Possible cause Solution
The appliance
does not work
The plug is not Connect the appliance to
plugged into the the power supply
mains
Power cut
Check whether other
kitchen appliances are
working
The fuse is
faulty
Check in the fuse box to
make sure that the fuse for
the appliance is in working
order
The lighting
does not work.
The LED lights
are defective.
Call the after-sales service.
The button illumination does
not work.
The control unit Call the after­sales service.
is faulty.
The F indicator
and the
# button light
up or the
F indicator and
the 8 3 button
light up.
The grease filter
or the activated
charcoal filter is
saturated.
--------
8
Clean the filter or regenerate or replace the activated
charcoal filter; see the
Cleaning and maintenance
section.
2. Remove the cover.
4. Correctly insert the new batteries (AAA/LR03/1.5 V).
Note: Dispose of flat or faulty batteries in accordance with local
regulations.
Note: Do not dispose of batteries along with general household
waste.
After-sales service
Our after-sales service is there for you if your appliance needs
to be repaired. We will always find the right solution in order to
avoid unnecessary visits from a service technician.
Please be aware that a visit by an after-sales engineer will be
charged if a problem turns out to be the result of operator error,
even during the warranty period.
When calling us, please give the product number (E no.) and
the production number (FD no.) so that we can provide you with
the correct advice. The rating plate with these numbers can be
found inside the appliance (remove the metal mesh grease
filter to gain access).
Please find the contact data of all countries in the enclosed
customer service list.
You can make a note of the numbers of your appliance and the
telephone number of the after-sales service in the space below
to save time should it be required.
E no.
FD no.
After-sales serviceO
To book an engineer visit and product advice
GB
0344 892 8989
Calls charged at local or mobile rate.
IE
01450 2655
0.03 € per minute at peak. Off peak 0.0088 € per
minute.
Rely on the professionalism of the manufacturer. You can
therefore be sure that the repair is carried out by trained service
technicians who carry original spare parts for your appliances.
Special accessories
Accessories
Order number
Activated charcoal filter for
I90CN48W0
Z54CP00X0
Activated charcoal filter for
I92CN48W0
Z54CP01X0
--------
9
Constructa-Neff
Vertriebs-GmbH
Carl-Wery-Straße 34
D-81739 München
GERMANY
Register your product online
www.neff-international.com
*9001158471*
9001158471
960307