N439606 man 10Kg demo hammer D25899 UK XE.indd

D25899
D25902
D25941
English (original instructions)
6
Copyright DEWALT
B
Figure 1
D25899
e
d
a
b
f
q
c
D25902
e
d
a
b
f
q
D25941
e
d
a
b
f
q
1
Figure 2
Figure 3
D25899
D25902
Figure 4
D25899
D25902
e
2
Figure 5
D25941
Figure 6
h
D25941
19 mm
e
g
3
Figure 7
d
Figure 8
x
f
r
4
i
Figure 9
j
k
l
m
n
o
p
5
ENGLISH
DEMOLITION HAMMER
D25899, D25902, D25941
Congratulations!
You have chosen a DEWALT power tool. Years of experience, thorough product development and innovation
make DEWALT one of the most reliable partners for professional power tool users.
Technical Data
Voltage
U.K. & Ireland only
Type
Frequency
Power input
Impact rate
Impact energy (EPTA 05/2009)
Tool holder
Chisel positions
Weight
VAC
VAC
Hz
W
min-1
J
kg
D25899
230
230 or 115
1
50
1,500
2,040
17.5
SDS Max®
12
9.9
D25899
(230 V)
D25902
230
230 or 115
1
50
1,550
1,050–2,100
19
SDS Max®
12
10.5
D25902
(230 V)
D25902
(115 V)
D25941
(230 V)
D25941
(115 V)
Noise values and vibration values (triax vector sum) according to EN60745-2-6:
LPA (emission sound pressure level)
dB(A)
86
86
LWA (sound power level)
dB(A)
100
100
KWA (uncertainty for the given sound level) dB(A)
3
3
89
100
3
89
100
3
91
102
3
91
102
3
Chiselling
Vibration emission value ah,Cheq = m/s²
Uncertainty K =
m/s²
7.5
1.5
7.5
1.5
8.8
1.5
8.8
1.5
12
1.5
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
6
D25899
(115 V)
D25941
230
230 or 115
1
50
1,600
1,620
22.5
19 mm Hex
12
13.8
12
1.5
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
Fuses:
Europe
U.K. & Ireland
230 V tools
230 V tools
10 Amperes, mains
13 Amperes, in plugs
ENGLISH
Definitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
The undersigned is responsible for compilation of
the technical file and makes this declaration on
behalf of DEWALT.
Markus Rompel
Director Engineering
DEWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
02.03.2015
WARNING: To reduce the risk of injury,
read the instruction manual.
General Power Tool Safety Warnings
WARNING! Read all safety warnings
and instructions Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
Denotes risk of fire.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
OUTDOOR NOISE DIRECTIVE
DEMOLITION HAMMER
D25899, D25902, D25941
DEWALT declares that these products described
under Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009 +A11:2010,
EN60745-2-6:2010;
2000/14/EC, Electrical concrete breaker (hand-held),
m ≤ 15 kg, Annex VIII, TÜV Rheinland LGA Products
GmbH (0197), D-90431 Nürnberg, Germany,
Notified Body ID No.: 0197
Level of sound power according to 2000/14/EC
(Article 12, Annex III, No. 10; m ≤ 15 kg):
LWA (measured sound power level)
D25899, D25902
D25941
dB
dB
100
102
LWA (guaranteed sound power level)
dB
105
These products also comply with Directive
2004/108/EC (until 19.04.2016), 2014/30/EU (from
20.04.2016) and 2011/65/EU. For more information,
please contact DEWALT at the following address or
refer to the back of the manual.
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7
ENGLISH
d)
e)
f)
Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric
shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off position before
connecting to power source and/or
battery pack, picking up or carrying the
tool. Carrying power tools with your finger
on the switch or energising power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating
part of the power tool may result in personal
injury.
e) Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce
dust-related hazards.
8
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it
was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with the switch
is dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories, or
storing power tools. Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool’s operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and
tool bits etc., in accordance with these
instructions taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5) SERVICE
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Additional Safety Instructions for
Demolition Hammers
• Wear ear protectors. Exposure to noise can
cause hearing loss.
• Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
• Hold power tools by insulated gripping
surfaces when performing an operation
ENGLISH
where the cutting accessory may contact
hidden wiring or its own cord. Cutting
accessory contacting a “live” wire may make
exposed metal parts of the tool “live” and could
give the operator an electric shock.
• Be certain that the material being drilled does
not conceal electric or gas service and that
their locations have been verified with the utility
companies.
• Keep a firm grip on the tool at all times. Do not
attempt to operate this tool without holding it
with both hands. Operating this tool with one
hand will result in loss of control. Breaking
through or encountering hard materials such as
re-bar may be hazardous as well. Tighten the
side handle securely before use.
• Ensure the chisel is secured in place before
operating the tool.
• In cold-weather conditions or when the tool
has not been used for a longer period of time,
let the tool run with no load for several minutes
before use.
• When working above ground level ensure the
area below is clear.
• Do not touch the chisel or the parts close to the
chisel immediately after operation, as they may
be extremely hot and cause burns to the skin.
• Always direct the power cable to the rear, away
from the chisel.
• Do not operate this tool for long periods of
time. Vibration caused by hammer action may
be harmful to your hands and arms. Use gloves
to provide extra cushion and limit exposure by
taking frequent rest periods.
WARNING: We recommend the use of
a residual current device with a residual
current rating of 30mA or less.
Residual Risks
The following risks are inherent to the use of
demolition hammers:
– Injuries caused by touching the hot parts of the
tool.
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing.
– Health hazards caused by breathing dust
developed when working in concrete and/or
masonry.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual
before use.
Wear ear protection.
Wear eye protection.
DATE CODE POSITION (FIG. 1)
The Date Code (q), which also includes the year of
manufacture, is printed into the housing.
Example:
2015 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Demolition hammer
1 Side handle
1 Pointed chisel (D25902, D25941)
1 Kitbox
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fig. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. On/off switch
b. Main handle
c. Electronic impact energy control dial (D25902)
d. Chisel position index collar
e. Tool holder/sleeve
f. Side handle
– Risk of squeezing fingers when changing the
accessory.
9
ENGLISH
INTENDED USE
The D25899, D25902 and D25941 heavy-duty
demolition hammers are designed for heavy-duty
demolition, chipping and chasing applications.
Your DEWALT tool is double insulated in
accordance with EN60745 ; therefore no
earth wire is required.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
DEWALT service organization.
These heavy-duty demolition hammers are
professional power tools. DO NOT let children come
into contact with the tool. Supervision is required
when inexperienced operators use this tool.
Mains Plug Replacement
(U.K. & Ireland Only)
• Young children and the infirm. This appliance
is not intended for use by young children or
infirm persons without supervision.
• This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities; lack of
experience, knowledge or skills unless they are
supervised by a person responsible for their
safety. Children should never be left alone with
this product.
Soft Start Feature
D25902, D25941
The soft start feature allows the impact rate to build
up more slowly, thus preventing the chisel or point
from “bouncing” around on the masonry when
starting up.
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in
the plug.
• Connect the blue lead to the neutral terminal.
WARNING: No connection is to be
made to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs. Recommended fuse: 13 A.
For 115 V units with a power rating exceeding
1500 W, we recommend to fit a plug to BS4343
standard.
WARNING: 115 V units have to
be operated via a fail-safe isolating
transformer with an earth screen
between the primary and secondary
winding.
Active Vibration Control
Using an Extension Cable
D25902, D25941
If an extension cable is required, use an approved
3–core extension cable suitable for the power input
of this tool (see Technical Data).The minimum
conductor size is 1.5 mm2; the maximum length
is 30 m.
The active vibration control neutralises rebound
vibration from the hammer mechanism. Lowering
hand and arm vibration, it allows more comfortable
use for longer periods of time and extends the life of
the unit.
Electronic Impact Energy Control
(fig. 1)
D25902 ONLY
The electronic impact energy control (c) offers the
following advantages:
• use of smaller accessories without risk of
breakage
• minimised break-out when chiselling soft or
brittle materials
• optimal tool control for precise chiselling
Electrical Safety
The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
10
When using a cable reel, always unwind the cable
completely.
ASSEMBLY AND ADJUSTMENT
WARNING: To reduce the risk of
injury, turn unit off and disconnect
machine from power source before
installing and removing accessories,
before adjusting or changing setups or when making repairs. Be sure
the trigger switch is in the OFF position.
An accidental start-up can cause injury.
WARNING: Always wear gloves when
changing accessories. The exposed
metal parts on the tool and accessory
may become extremly hot during
operation.
ENGLISH
Inserting and Removing SDS Max®
Accessories (fig. 3, 4)
D25899, D25902
This machine uses SDS Max® chisels (refer to the
inset in Figure 4 for a cross-section of a chisel
shank).
Only DEWALT recommended accessories should be
used with this product.
1. Clean the chisel shank.
WARNING: Do not apply lubricant to
the machine.
2. Insert the chisel shank into the tool holder/
sleeve (e). Press and turn the chisel slightly until
the sleeve snaps into position.
3. Pull on the chisel to check if it is properly
locked. The hammering function requires
the chisel to be able to move axially several
centimetres when locked in the tool holder.
4. To remove a chisel, pull back the tool holder/
sleeve (e) and pull the chisel out of the tool
holder.
Inserting and Removing 19 mm Hex
Accessories (fig. 5, 6)
D25941
This machine uses chisels with a 19 mm hex. shank
(refer to the inset in Figure 6 for a cross-section of a
chisel shank).
Only DEWALT recommended accessories should be
used with this product.
1. Clean the chisel shank.
WARNING: Do not apply lubricant to
the machine.
1. Insert the chisel as described above.
2. Rotate the chisel position collar (d) in the
direction of the arrow until the chisel is in the
desired position.
Setting the Electronic Impact Power
Control Dial (fig. 1)
D25902
Turn the dial (c) to the desired level. The higher the
number, the greater the impact energy. With dial
settings from «1» (low) to «7» (full power) the tool is
extremely versatile and adaptable for many different
applications.
The required setting is a matter of experience,
for example:
• when chiselling soft, brittle materials or when
minimum break-out is required, set the dial to
«1» or «2» (low);
• when breaking harder materials, set the dial to
«7» (full power).
Fitting and Adjusting the Side Handle
(fig. 8)
The side handle (f) can be mounted on the front of
the machine to suit both RH- and LH-users.
WARNING: Always operate the
machine with the side handle properly
mounted.
1. Unscrew the side handle clamp knob (i).
2. Slide the side handle assembly onto the
machine locating the steel ring (r) in the
mounting area (x). The correct position of the
side handle is between head and middle of the
tube.
3. Adjust the side handle (f) to the desired angle.
2. Pull back the tool holder/sleeve (e), align the
groove (g) with the yellow marker (h) and insert
the chisel shank into the tool holder. Release
the locking sleeve.
3. Pull on the chisel to check if it is properly
locked. The hammering function requires
the chisel to be able to move axially several
centimetres when locked in the tool holder.
4. To remove a chisel, pull back the tool holder/
sleeve (e) and pull the chisel out of the tool
holder.
Indexing the Chisel Position (fig. 7)
The chisel can be indexed and locked into
12 different positions.
4. Slide and rotate the side handle to the desired
position.
5. Lock the side handle in place by tightening the
clamp knob (i).
OPERATION
Instructions for Use
WARNING:
• Always observe the safety instructions
and applicable regulations.
• Be aware of the location of pipework and
wiring.
11
ENGLISH
• Apply a pressure of approx. 20–30 kg
to the tool. Excessive force does not
speed up chiselling but decreases tool
performance and may shorten tool life.
WARNING: To reduce the risk of
injury, turn unit off and disconnect
machine from power source before
installing and removing accessories,
before adjusting or changing setups or when making repairs. Be sure
the trigger switch is in the OFF position.
An accidental start-up can cause injury.
Proper Hand Position (fig. 1, 2)
WARNING: To reduce the risk of
serious personal injury, ALWAYS use
proper hand position as shown.
WARNING: To reduce the risk of
serious personal injury, ALWAYS hold
securely in anticipation of a sudden
reaction.
WARNING: To reduce the risk of
injury, turn unit off and disconnect
machine from power source before
installing and removing accessories,
before adjusting or changing
set-ups or when making repairs.
Be sure the trigger switch is in the OFF
position. An accidental start-up can
cause injury.
This machine is not user-serviceable. Take the
tool to an authorised DEWALT repair agent after
approximately 100 hours of use. If problems occur
before this time contact an authorised DEWALT
repair agent.
Accessory Maintenance (fig. 9)
Accessory maintenance at the right time guarantees
optimal results in application and a long and efficient
accessory life.
Grind the chisels on grinding discs. Refer to Figure 9
for the appropriate angles of the following chisels:
Proper hand position requires one hand on the side
handle (f), with the other hand on the main handle (b).
j. spade-shaped chisel
Switching On and Off (fig. 1)
l. pointed chisel
Switching on: set the on/off switch (a) to position 1.
Switching off: set the on/off switch (a) to position 0.
Demolition, Chasing and Channelling
(fig. 1)
1. Select the appropriate chisel and clean.
2. Insert the chisel and check whether it is properly
locked.
3. Set the desired impact energy level.
4. Fit and adjust the side handle (f) and make sure
it is firmly tightened.
k. cold chisel
m. U-shaped chisel
n. hollow chisel
o. mortar chisel
p. toothed chisel
WARNING: These chisels can be
reground only a limited number of
times. If in doubt, contact your dealer for
recommendations.
WARNING: Ensure that the cutting
edge does not show discolouration
caused by too much pressure. This may
impair the hardness of the accessory.
5. Hold the tool at both handles (b, f) and switch
on. The tool now runs in continuous operation.
6. Always switch off the tool when work is finished
and before unplugging.
Various types of chisels are available as an option.
Only DEWALT recommended accessories should be
used with this product.
MAINTENANCE
Your DEWALT power tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning
12
Lubrication
Your power tool requires no additional lubrication.
Cleaning
WARNING: Blow dirt and dust out of
the main housing with dry air as often
as dirt is seen collecting in and around
the air vents. Wear eye protection when
performing this procedure.
ENGLISH
WARNING: Never use solvents or
other harsh chemicals for cleaning the
non-metallic parts of the tool. These
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
tool; never immerse any part of the tool
into a liquid.
You can check the location of your nearest
authorised repair agent by contacting your local
DEWALT office at the address indicated in this
manual. Alternatively, a list of authorised DEWALT
repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com.
Optional Accessories
WARNING: Since accessories, other
than those offered by DEWALT, have
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only DEWALT recommended
accessories should be used with this
product.
Consult your dealer for further information on the
appropriate accessories.
Protecting the Environment
Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your DEWALT product
needs replacement, or if it is of no further use to
you, do not dispose of it with household waste.
Make this product available for separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
DEWALT provides a facility for the collection and
recycling of DEWALT products once they have
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
13
Belgique et
Luxembourg België
en Luxemburg
DEWALT - Belgium BVBA
Egide Walschaertsstraat 16
2800 Mechelen
Tel: NL
Tel: FR
Fax:
Danmark
DEWALT
Roskildevej 22
2620 Albertslund
Tel: 70 20 15 10
Fax: 70 22 49 10
www.dewalt.dk
kundeservice.dk@sbdinc.com
Deutschland
DEWALT
Richard Klinger Str. 11
65510 Idstein
Tel: 06126-21-1
Fax: 06126-21-2770
www.dewalt.de
infodwge@sbdinc.com
Ελλάς
Τηλ: 00302108981616
DEWALT (Ελλάς) Α.Ε.
EΔΡΑ-ΓΡΑΦΕΙΑ : Στράβωνος 7
Φαξ: 00302108983570
& Λ. Βουλιαγμένης, Γλυφάδα 166 74, Αθήνα
SERVICE : Ημερος Τόπος 2 (Χάνι Αδάμ) –
193 00 Ασπρόπυργος
www.dewalt.gr
Greece.Service@sbdinc.com
España
DEWALT Ibérica, S.C.A.
Parc de Negocios “Mas Blau”
Edificio Muntadas, c/Bergadá, 1, Of. A6
08820 El Prat de Llobregat (Barcelona)
Tel: 934 797 400
Fax: 934 797 419
www.dewalt.es
respuesta.postventa@sbdinc.com
France
DEWALT
5, allée des Hêtres
BP 30084, 69579 Limonest Cedex
Tel: 04 72 20 39 20
Fax: 04 72 20 39 00
www.dewalt.fr
scufr@sbdinc.com
Schweiz
Suisse
Svizzera
DEWALT
In der Luberzen 42
8902 Urdorf
Tel: 044 - 755 60 70
Fax: 044 - 730 70 67
www.dewalt.ch
service@rofoag.ch
Ireland
DEWALT
Calpe House Rock Hill
Black Rock, Co. Dublin
Tel: 00353-2781800
Fax: 00353-2781811
www.dewalt.ie
Italia
DEWALT
via Energypark
20871 Vimercate (MB), IT
Tel:
800-014353
39 039 9590200
Fax: 39 039 9590313
www.dewalt.it
Nederlands
Tel: 31 164 283 063
DEWALT Netherlands BV
Holtum Noordweg 35
Fax: 31 164 283 200
6121 RE BORN, Postbus 83, 6120 AB BORN
www.dewalt.nl
Norge
DEWALT
Postboks 4613, Nydalen
0405 Oslo
Tel: 45 25 13 00
Fax: 45 25 08 00
www.dewalt.no
kundeservice.no@sbdinc.com
Österreich
DEWALT
Werkzeug Vertriebsges m.b.H
Oberlaaerstrasse 248, A-1230 Wien
Tel: 01 - 66116 - 0
Fax: 01 - 66116 - 614
www.dewalt.at
service.austria@sbdinc.com
Portugal
DEWALT Limited, SARL
Tel: 214 66 75 00
Centro de Escritórios de Sintra Avenida
Fax: 214 66 75 80
Almirante Gago Coutinho, 132/134, Edifício 14
2710-418 Sintra
www.dewalt.pt
resposta.posvenda@sbdinc.com
Suomi
DEWALT
PL 47
00521 Helsinki
Puh: 010 400 4333
Faksi: 0800 411 340
www.dewalt.fi
asiakaspalvelu.fi@sbdinc.com
Sverige
DEWALT
Box 94
431 22 Mölndal
Tel: 031 68 61 60
Fax: 031 68 60 08
www.dewalt.se
kundservice.se@sbdinc.com
Türkiye
KALE Hırdavat ve Makina A.Ş.
Defterdar Mah. Savaklar Cad. No:15
Edirnekapı / Eyüp / İSTANBUL 34050
TÜRKİYE
Tel: 0212 533 52 55
Faks: 0212 533 10 05
www.dewalt.com.tr
United
Kingdom
DEWALT, 210 Bath Road;
Slough, Berks SL1 3YD
Tel: 01753-567055
Fax: 01753-572112
www.dewalt.co.uk
emeaservice@sbdinc.com
Australia
DEWALT
82 Taryn Drive, Epping
VIC 3076 Australia
Tel: Aust 1800 338 002
Tel: NZ 0800 339 258
www.dewalt.com.au
www.dewalt.co.nz
Middle East Africa
DEWALT
P.O. Box - 17164,
Jebel Ali Free Zone (South), Dubai, UAE
Tel: 971 4 812 7400
Fax: 971 4 2822765
www.dewalt.ae
Service.MEA@sbdinc.com
N439606
32 15 47 37 63
32 15 47 37 64
32 15 47 37 99
www.dewalt.be
enduser.BE@SBDinc.com
05/15