Bow LX - Visionaire Lighting

09.15.17
BOW LX - LED Luminaire
The BOW LX LED Luminaire from Visionaire combines unique contemporary design with the latest LED technology
and provides optimum lighting and energy savings over traditional lighting systems. 3, 4, 6 or 8 independent die-cast
light engines allow use of up to 1000 mA drivers for maximum lumen output of over 110,000+ lumens. The dedicated
heat sink for each LED array maximizes it’s thermal management characteristics; allowing for long life of the LEDs and
maximum light output.
An adjustable knuckle mounting system allows for up to 90 degrees of vertical adjustment, for maximum flexibility or
aiming of the LEDs, to put the light in just the right place as needed; or choose a rounded extruded aluminum Bolt-On
Arm. Choose from nine distribution patterns for maximum utilization of the high output of the LED light engines.
The BOW LX LED series leads the way with its innovative design and adjustable mounting style. This is an LED outdoor lighting series that will provide value for many years to come; serving a multitude of markets that have not been
addressed during the recent introduction of LED lighting.
Construction
• All aluminum construction throughout provides lasting durability for the BOW LX LED series
• 3, 4, 6 or 8 die-cast light engines with external fins, for maximum heat dissipation for long life of the LEDs.
• A separate extruded aluminum vented driver compartment allows for cooler operation and longer life of the driver(s).
LED Technology
• 96,128,192 or 256 LEDs available in 530, 700, or 1000 mA ratings.
• 3000, 4000 or 5000 Kelvin for natural or white light.
• Full cutoff optics available in nine distribution patterns.
• Minimum of 75,000 hours of life for the LEDs
Applications
The BOW LX LED series can be used for a variety of lighting projects such as general area lighting, shopping centers
and automobile dealerships. Choose the BOW LX LED series for your next lighting project.
Project Name:
BOW LX LED
Catalog Number:
Type
Dimensional Drawings
BLX-4 Shown with Decorative Shroud
A
C
B
The new BOW LX LED Series continues the unique contemporary
design inspired by the sleek styling of the BOW family. Separating
the extruded aluminum driver housing and the individual die-cast
aluminum linear LED engines: optimize the life of the LEDs and
the Driver(s); and maximizes the lumen output of the fixture. The
adjustable knuckle allows for up to 90° degrees of vertical adjustment
for putting the light exactly where you need it.
Each of the individual LED light engines come with 32 LEDs; for a
max total of 256 LEDs. Nine optical distribution patterns are available.
Model
BLX-3
Optics
Type I
(T1)
Type II
(T2)
BLX-4
BLX-6
BLX-8
Type III
(T3)
Type IV
(T4)
Type IV-A
(T4A)
Type V
(T5)
Type V-W
(T5W)
Type FN
(FN)
Type FM
(FM)
Source Current
# Of LEDs mA
96
350
(96LC)
(3)
128
(128LC)
192
(192LC)
256
(256LC)
530
(5)
700
(7)
1000
(10)
Kelvin
3000K
*Warm white
(3K)
4000K
*Neutral white
(4K)
5000K
*Cool white
(5K)
Fixture
A
B
C
Max. Watts
Lbs
BLX-3
37”
5”
12”
331
38
BLX-4
37”
5”
17”
434
50
BLX-6
37”
5”
25”
666
75
BLX-8
37”
5”
33”
884
100
A unique Type 4-A automotive distribution pattern is available for
the front rows of Auto Dealerships. Available in 3000, 4000 or 5000
Kelvin temperature.
A durable polyester powder coat finish is guaranteed for five years;
and is available in standard or custom colors.
The BOW LX LED series is an exceptional choice for auto
dealerships, shopping centers, commercial parking lots and
general area lighting.
Voltage
Mounting
120-277 Knuckle Mount
*Universal
Voltage
(UNV)
480
(5)
347
(8)
*Slips over 2 3/8” Tenon
with adjustable Increments
of 10˚
(KM)
Bolt-On Arm 6”
(BOA6)
Wall Mount
(WM)
*BLX-3 & BLX-4 only
*PCR & PER
not available
Adjustable
Wall Mount
(AWM)
*BLX-3 & BLX-4 only
Bolt-On Arm
Wall Plate
(BAWP)
*BLX-3 & BLX-4 only
Finish
Bronze
Button Type Photocell
Black
Photocell & Receptacle
(BZ)
(BK)
Smooth Black
(SBK)
White
*Specify voltage.
(PC120) (PC208)
(PC240) (PC277)
*Specify voltage
(PCR120)
(PCR240)
(PCR208)
(PCR277)
Photo Receptacle
(PER)
*With shorting cap
Round Pole Plate Adaptor
fits 3”OD – 5” OD
(RPP)
(WH)
Motion Sensor
Smooth White
9-20’ Mounting Height
(SWH)
*Works with FSP-211
(WSC-8)
8’ Mounting Height
(WSC-20)
(WSC-40)
21-40’ Mounting Height
*For BOA Mounting Option Only
Graphite
This option will require(1) FSIR 100
remote for programing
Grey
(SBOR OEX)
(SBOR ODP)
(GP)
(GY)
Bolt-On Arm
Wall Plate-XL
Silver Metallic
*BLX-6 and BLX-8 only
Custom Color
(BAWP-XL)
Options
(SL)
(CC)
Pole Mounted
Motion Sensor
*w/ photocell
Universal Pole
Mount Adaptor
(UPMA)
*Only available for
BLX-3, BLX-4 & BLX-6
Decorative Shroud
(DS)
Back Side Cutoff Louver Shield
(CLS)
Right Side Cutoff Louver Shield
(RCLS)
Left Side Cutoff Louver Shield
(LCLS)
For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LLC.
Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice.
BOW LX
LED
Housing
Electrical Assembly
• The LED light engines are constructed of heavy-duty, die-cast aluminum, with external heat radiating fins.
• The BOW LX Series is supplied with a choice of 350, 530, 700, or 1000 mA high-performance LED drivers,
that accept 120v thru 480v, 50 Hz to 60 Hz, input. Power factor of 95%. Rated for -40 °C to +55 º C
operations.
Driver Compartment
• The separate driver housing is constructed of extruded aluminum, with vented cast aluminum end covers
and stainless steel fasteners; for easy access to the LED driver(s); allowing for cooler operation and longer
driver life. One-piece gasketing is utilized throughout the fixture for weather tight operation.
Thermal Management
• The BOW LX Series provides excellent overall thermal management by maximizing the fixture’s heat sink
capabilities. This enables the BOW LX Series to withstand higher ambient temperatures and drive currents
without degrading LED life.
• 10 kV surge protector supplied as standard.
• 0-10v Dimming Driver supplied as standard.
Warranty
• Five (5) year Limited Warranty on entire system, including finish. For full warranty information, please visit
VisionaireLighting.com.
• The L70 test determines the point in an LEDs life when it reaches 70 percent of its initial output. The BOW
LX Series LEDs have been determined to last a minimum of 75,000 hours in 25°C environments when
driven at 530 mA.
Options
Optical System
• Button Type Photocell
• The highest lumen output, LEDs are utilized in the BOW LX Series. IES distribution Types I, II, III, IV, IV-A, V,
V-W, FM and FN are available. LED light engines come in multiples of 32 LEDs.
• Photocell & Receptacle
• CRI values are 70.
• Round pole plate adaptor
Quali-Guard® Finish
• Motion Sensor
• The finish is a Quali-Guard® textured, chemically pretreated through a multiple-stage washer,
electrostatically applied, thermoset polyester powder coat finish, with a minimum of 3-5 millimeter thickness.
Finish is oven-baked at 400 ºF to promote maximum adherence and finish hardness. All finishes are
available in standard and custom colors.
• Pole Mounted Motion Sensor
Finish is guaranteed for five (5) years.
• Photo Receptacle
• Universal Pole Mount Adaptor (BLX-3, BLX-4 & BLX-6 Only)
• Decorative Shroud
• Cut-Off Louver Sheild
Mounting
• An adjustable knuckle slip fits over a 2 3/8” Tenon, and allows for up to 90° degrees of vertical adjustment
in 10° degree increments from horizontal, as well as full side to side adjustment with the knuckle mount.
Listings
• A round extruded aluminum, Bolt -On Arm (BOA) with an in-pole nut plate. A Round Pole Plate Adaptor
(RPP) is required for mounting to round poles.
• BOW LX Series is UL listed, suitable for wet locations
• Wall Mount
• RoHS compliant
• Adjustable Wall Mount
• Meets ANSI C136.31-2010 3G Vibration Standards when ordered with
• Bolt-On Arm Wall Plate
Knuckle Mount
• Bolt-On Arm Wall Plate - XL
• LM79 and LM80
• Powder Coated Tough™
• IP-65 Rated
BLX EPA Data
Tilt Deg.
BLX-3
BLX-4
BLX-6
BLX-8
0
.7
.7
.8
1.1
1.6
10
.71
.9
1.2
20
1.02
1.3
1.8
2
30
1.32
1.7
2.4
3.1
40
1.62
2.1
3
3.9
50
1.86
2.4
3.4
4.5
60
2.07
2.6
3.8
5
• DLC Listed
IP65
RATED
70
2.21
2.8
4.1
5.4
80
2.29
2.9
4.3
5.7
90
2.30
3
4.5
6.1
DesignLights Consortium (DLC) qualified Product. Some configurations of this product family may not be DesignLights Consortium (DLC)
listed, please refer to the DLC qualified products list to confirm listed configurations. http://www.designlights.org/
5K Lumen Data *Chart updated 7.21.17
#LEDs
mA
T1
lm/w
T2
lm/w
T3
lm/w
T4
lm/w
T4A
lm/w
T5
lm/w
T5W
lm/w
FN
lm/w
FM
lm/w
Watts
96
350
16255
159
14683
144
15108
148
14734
144
16687
164
15821
155
15187
149
16540
162
16721
164
102
530
22083
139
19948
125
20525
129
20017
126
22670
143
21493
135
20632
130
22470
141
22716
143
159
700
31226
147
28206
132
29023
136
28304
133
32056
150
30391
143
29173
137
31773
149
32120
151
213
1000
46064
139
41609
126
42814
129
41754
126
47288
143
44833
135
43037
130
46871
142
47384
143
331
350
24802
173
22404
157
23053
161
22482
157
25462
178
24140
169
23172
162
25237
176
25513
178
143
530
35571
169
32131
152
33061
157
32243
153
36516
173
34620
164
33233
158
36194
172
36590
173
211
700
45206
160
40834
145
42016
149
40976
145
46407
165
43998
156
42235
150
45997
163
46501
165
282
1000
60953
140
55059
127
56653
131
55251
127
62574
144
59325
137
56947
131
62021
143
62700
144
434
350
34626
166
31278
150
32183
154
31387
150
35547
170
33701
161
32351
155
35233
169
35618
170
209
530
44167
139
39895
125
41051
129
40035
126
45341
143
42987
135
41264
130
44940
141
45432
143
318
700
62451
147
56412
132
58045
136
56609
133
64111
150
60783
143
58347
137
63545
149
64241
151
426
128
192
256
1000
79980
122
72245
110
74337
113
72497
111
82106
125
77843
119
74723
114
81380
124
82271
125
656
350
45117
162
40754
147
41934
151
40896
147
46316
167
43912
158
42152
152
45907
165
46410
167
278
530
64902
151
58626
136
60323
140
58831
137
66628
155
63169
147
60637
141
66039
154
66762
155
430
700
80490
141
72706
128
74811
131
72960
128
82630
145
78340
137
75200
132
81900
144
82796
145
570
1000
109721
124
99110
112
101980
115
99456
113
112638
127
106790
121
102510
116
111643
126
112865
128
884
Visit www.Visionairelighting.com for up-to-the-minute chart information. 4K Multiply by .98 3K .925
19645 Rancho Way Rancho Dominguez, CA 90220
Tel: (310) 512-6480 Fax: (310) 512-6486
www.visionairelighting.com
BOW SX - LED Luminaire
The new BOW SX LED Series offers clean, functional styling that is defined by its sleek low profile design and rugged construction. It combines the latest LED performance and advanced LED thermal management technology, and provides lighting that is
both energy efficient and aesthetically pleasing. Choose from 32 to 64 LEDs, that looks perfect with any of the LED configurations; thereby enabling the lighting designer to tailor the lighting to the application needs; while maintaining a uniform appearance
throughout the entire project. Choose from a 3,500 to 21,000+ lumen package with life expectancy of well over 20 years.
For general wall mount and pedestrian areas, the BOW SX LED series brings contemporary LED lighting design into the 21st century.
Fixture Construction
• Die Cast Aluminum light engines and extruded aluminum driver housing with integrated thermal heat sink for maximum thermal
management of the LEDs for extreme long life of the LEDs.
• A Knuckle, Bolt-On Arm or Wall mounting design that simplifies the installation of the fixture.
• Engineered optical assemblies with nine distribution patterns.
LED Technology
• 32 to 64 LEDs
• 350,530,700 or 1000 mA ratings.
• 3,500 to 21,000+ lumen package available.
• 3000, 4000 or 5000 Kelvin for natural or white light.
• Full cutoff optics available in six distribution patterns.
• 69,000 to 126,000 hours or more of life for the LEDs
Applications
• The BOW SX LED Series is destined to become the standard for which LED area lights are measured. Simple flowing lines that
house scalable LEDs that replace traditional HID fixtures; for a wide range of lighting applications. From shopping centers, auto
dealerships to general parking lots; the BOW SX LED series is the transition of LED lighting into tomorrow.
Project Name:
BOW SX LED
Catalog Number:
Type
Dimensional Drawings
BSX-3 Shown with Decorative Shroud
A
A
BSX-4 Wall Mount Shown
The new BOW SX LED Series continues the unique
contemporary design inspired by the sleek styling of the
BOW family. Separating the extruded aluminum driver
housing and the individual die-cast aluminum linear LED
engines: optimize the life of the LEDs and the Driver(s);
and maximizes the lumen output of the fixture.
C
C
B
B
Fixture
A
B
BSX-2
20” or 28.5”
C
Max. Watts
Lbs
5”
BSX-3
20” or 28.5”
5”
8.75”
111
16
12.75”
166
21
BSX-4
20” or 28.5”
5”
16.75”
222
26
Available in 3000, 4000 or 5000 Kelvin temperature.
A durable polyester powder coat finish is guaranteed for
five years; and is available in standard or custom colors.
The BOW SX LED series is an exceptional choice for
shopping centers, schools, office buildings, and general
Each of the individual LED light engines come with 16 area lighting.
LEDs; for a max total of 64 LEDs. Nine optical distribution
patterns are available.
Model
Optics
Type I
(T1)
BSX-2
Type II
(T2)
BSX-3
Type III
(T3)
BSX-4
Type IV
(T4)
Type IVA
(T4A)
Source Current
# Of LEDs mA
32
350
(32LC)
(3)
48
(48LC)
64
(64LC)
530
(5)
700
(7)
1000
(10)
Kelvin
3000K
*Warm white
(3K)
4000K
Voltage
120-277
*Universal
Voltage
(UNV)
*Neutral white
480
(4K)
(5)
5000K
347
*Cool white
(5K)
(8)
Mounting
Knuckle Mount
*Slips over 2 3/8” Tenon
with adjustable Increments
of 10˚
(KM)
Bolt-On Arm 6“
(BOA6)
Wall Mount
(WM)
*PCR & PER
not available
Adjustable
Wall Mount
(AWM)
Finish
Bronze
(BZ)
Black
(BK)
Smooth Black
(SBK)
White
(WH)
Smooth White
(SWH)
Options
Button Type Photocell
*Specify voltage.
(PC120) (PC208)
(PC240) (PC277)
Photocell & Receptacle
*Specify voltage
(PCR120)
(PCR240)
(PCR347)
(PCR208)
(PCR277)
(PCR480)
Photo Receptacle
(PER)
*With shorting cap
Round Pole Plate Adaptor
For 4ӯ Pole (RPP4)
For 5ӯ Pole (RPP5)
Motion Sensor
*Works with FSP-211
(WSC-8)
8’ Mounting Height
(WSC-20)
9-20’ Mounting Height
(WSC-40)
Type V
Graphite
(GP)
This option will require(1) FSIR 100
remote for programing
Type V-W
Grey
Pole Mounted
Motion Sensor
(SBOR OEX)
(SBOR ODP)
(T5)
(GY)
(T5W)
Silver Metallic
Type Flood
Narrow
(SL)
(FN)
Custom Color
Type Flood
Medium
(FM)
NOTE: UNIT IS
ADJUSTABLE FROM
HORIZONTAL TO
90° UPWARD MAX
WITH THE KNUCKLE
MOUNT.
(CC)
21-40’ Mounting Height
*For BOA Mounting Option Only
*w/ photocell
Universal Pole
Mount Adaptor
*Specify if pole is
round or square
(UPMA)
Decorative Shroud
(DS)
Back Side Cutoff Louver Shield
(CLS)
Right Side Cutoff Louver Shield
(RCLS)
Left Side Cutoff Louver Shield
(LCLS)
For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LLC.
Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice.
BOW SX
LED
Housing
Electrical Assembly
• The LED light engines are constructed of heavy-duty, die-cast aluminum, with external heat
radiating fins.
• The BOW SX Series is supplied with a choice of 350, 530, 700, or 1000 mA high-performance
LED drivers, that accept 120v thru 480v, 50 Hz to 60 Hz, input. Power factor of 95%. Rated for
-40 °C to +55 º C operations.
Driver Compartment
• The separate driver housing is constructed of extruded aluminum, with vented cast aluminum
end covers and stainless steel fasteners; for easy access to the LED driver(s); allowing for
cooler operation and longer driver life. One-piece gasketing is utilized throughout the fixture for
weather tight operation.
Thermal Management
• 10 kV surge protector supplied as standard.
• 0-10v Dimming Driver supplied as standard
Warranty
• Five (5) year Limited Warranty on entire system, including finish. For full warranty information,
please visit VisionaireLighting.com.
• The BOW SX Series provides excellent overall thermal management by maximizing the
fixture’s heat sink capabilities. This enables the BOW SX Series to withstand higher ambient
temperatures and drive currents without degrading LED life.
Options
• The L70 test determines the point in an LEDs life when it reaches 70 percent of its initial
output. The BOW SX Series LEDs have been determined to last a minimum of 100,000 hours in
25°C environments when driven at 350 mA.
Optical System
• The highest lumen output, LEDs are utilized in the BOW SX Series. IES distribution Types I, II,
III, IV, IV-A, V, V-W, FN & FM are available. LED light engines come in multiples of 16 LEDs.
• Button Type Photocell
• Photocell & Receptacle
• Photo Receptacle
• Round Pole Plate Adaptor
• Motion Sensor
• CRI values are 70.
• Pole Mounted Motion Sensor
Quali-Guard® Finish
• Universal Pole Mount Adaptor
• The finish is a Quali-Guard® textured, chemically pretreated through a multiple-stage washer,
electrostatically applied, thermoset polyester powder coat finish, with a minimum of 3-5
millimeter thickness. Finish is oven-baked at 400 ºF to promote maximum adherence and finish
hardness. All finishes are available in standard and custom colors.
• Decorative Shroud
Finish is guaranteed for five (5) years.
• IP-65
Mounting
• Powder Coated Tough™
• An adjustable knuckle slip fits over a 2 3/8” Tenon, and allows for up to 90° degrees of vertical
adjustment in 10° degree increments from horizontal, as well as full side to side adjustment with
the knuckle mount.
• DLC Listed
Listings
• BOW SX Series is UL Listed, suitable for wet locations.
• A round extruded 6” aluminum, Bolt -On Arm (BOA) with an in-pole nut plate. A Round Pole
Plate Adapter (RPP) is required for mounting to round poles.
• A cast wall mount plate is available for wall mount applications.
DesignLights Consortium (DLC) qualified Product. Some configurations of this product family may not be DesignLights Consortium (DLC)
listed, please refer to the DLC qualified products list to confirm listed configurations. http://www.designlights.org/
BSX EPA Data
Tilt Deg.
BSX-2
BSX-3
BSX-4
0
.58
.58
.59
10
.58
.62
.77
20
.62
.82
1.02
30
.76
1.02
1.28
40
.9
1.2
1.53
50
1.01
1.36
1.75
60
1.11
1.5
1.93
70
1.14
1.6
2.06
80
1.19
1.66
2.13
90
1.21
1.68
2.14
Bolt-On Arm Detail
BSX Knuckle Mount Shown
BOW SX 5K Lumen Data
# LEDs
32
48
64
Lumen Data Chart Updated 07.26.17
mA
Type 1
Type 2
Type 3
Type 4
Type 4A
Type 5
Type 5W
Type FN
Type FM
Watts
350
5677
5200
5210
5228
5904
5277
4994
6005
6152
36
530
7989
7318
7332
7358
8309
7426
7028
8451
8659
53
700
10458
9580
9598
9632
10878
9722
9200
11064
11335
72
1050
13810
12651
12674
12719
14364
12838
12148
14609
14968
109
350
8237
7546
7559
7586
8567
7657
7246
8714
8927
57
530
11862
10866
10886
10925
12338
11027
10435
12549
12856
81
700
15017
13756
13782
13830
15619
13960
13210
15886
16276
106
1050
20839
19089
19124
19192
21674
19372
18331
22045
22585
162
350
11357
10404
10423
10460
11813
10558
9991
12015
12309
73
530
16608
15214
15242
15296
17274
15439
14610
17570
18000
107
700
20901
19146
19182
19249
21739
19429
18386
22111
22653
139
27620
25301
25348
25437
28727
25675
24296
29219
29935
213
1050
Visit www.VisionaireLighting.com for up-to-the-minute chart information, including types not listed here.
* For 4000K multiply values by 0.98 * For 3000K multiply values by 0.925
19645 Rancho Way Rancho Dominguez, CA 90220
Tel: (310) 512-6480 Fax: (310) 512-6486
www.visionairelighting.com
Cross Bow Architectural LED Luminaire / Bollard
The Cross Bow LED Luminaire from Visionaire combines unique contemporary design with new LED
technology and provides optimum lighting and energy savings over traditional lighting systems. Choose the Architectural LED Luminaire / Bollard for pedestrian scale or the bollard for low level applications.
LED Technology
• 16 to 64 LED’s available in 350, 530, 700 or 1000 mA ratings.
• 3000, 4000 or 5000 Kelvin for natural or white light.
• Full cutoff optics available in six distribution patterns.
• 50,000 to 140,000 hours of life for the LED’s
Construction
• Die Cast aluminum construction throughout provides lasting durability for the Cross Bow - LED series.
• A cast aluminum driver compartment allows for cooler operation and longer life of the driver.
• The LED’s are mounted to an die cast aluminum heat sink built to draw heat away from the
LED junction points for extended LED life; and are housed totally independent from the driver.
Applications
• The Cross Bow - LED series can be used for a variety of lighting projects.
• Low level lighting for pathways and landscape lighting
• Higher level lighting for pedestrian and walkway lighting
• 17 to 118 watts of energy efficient lighting.
Project Name:
Cross Bow LED
Catalog Number:
Type
Dimensional Drawings
A
B
C
Single
C
A
A
B
D
4”
Double
The new Cross Bow LED Series continues the unique
contemporary design inspired by the sleek styling of the BOW™
family. Separating the Driver(s) from the individual die-cast
aluminum linear LED engines: optimize the life of the LEDs and
the Driver(s); and maximizes the lumen output of the fixture.
The LED light assemblies come in multiples of 16 LEDs; and are
offered in up to 32 LED’s.
Model
Model
C-BOW-1
36”
(3)
42”
(3.5)
Optics
Type I
(T1)
Type II
(T2)
Type III
(T3)
Type IV
(T4)
Fixture
A
B
C
D
Max. Watts
C-Bow-1
Single
14”
2.5”
4”
3.25”
48
C-Bow-1
Double
24”
2.5”
4”
3.25”
118
Six optical distribution patterns are available. Choose between
4000 or 5000 Kelvin temperature of the LED’s.
A durable polyester powdercoat finish is guaranteed for five
years; and is available in standard or custom colors.
The Cross Bow LED series is an exceptional choice for low
level lighting applications.
Source Current Kelvin Voltage Mounting
4000K 120-277 Anchor Base
# of LEDs mA
*Neutral white
*Universal
C-BOW-1 350
voltage
(4K)
(AB)
(3)
(UNV)
16
(ANCHOR BOLT
KIT SUPPLIED)
(16LC)
*Single
32
(32LC)
*Double
530
(5)
700
(7)
1000
(10)
5000K
*Cool white
(5K)
Finish
Bronze
(BZ)
Black
(BK)
Smooth Black
(SBK)
White
(WH)
Options
Button Type Photocell
*Specify voltage
(PC120)
(PC240)
(PC208)
(PC277)
0-10v Dimming Driver
No Controls
(DIM)
Dual Circuit
*Doubles Only
(DC)
Smooth White
(SWH)
Graphite
Type V
(GP)
(T5)
Grey
Type V-W
Silver Metallic
(T5W)
(GY)
(SL)
Custom Color
(CC)
For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LLC.
Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice.
Cross Bow
Housing
• The LED light engines are constructed of heavy-duty, die-cast aluminum, with
external heat radiating fins. The 4” extruded pole contains the driver(s), allowing for
cooler operation and longer life. Silicone gasketing is utilized throughout the fixture for
weather tight operation.
Thermal Management
• The Cross Bow Series provides excellent overall thermal management by maximizing
the fixture’s heat sink capabilities. This enables the Cross Bow Series to withstand
higher ambient temperatures and drive currents without degrading LED life. The Cross
BOW Series has a very low thermal resistance rating.
• The L70 test determines the point in an LEDs life when it reaches 70 percent of its
initial output. The Cross Bow Series LEDs have been determined to last a minimum of
140,000 hours in 25° C environments when driven at 350 mA.
Optical System
• The highest lumen output, Evo/C LEDs are utilized in the Cross Bow Series. IES
distribution Types I, II, III, IV, V and V-W are available. LED light assemblies come in
multiples of 16 LEDs. The optical system qualifies as IES full cutoff to restrict light trespass,
glare and light pollution. CRI values are 70 for 4000K and 75 for 5000K.
®
Quali-Guard Finish
• The finish is a Quali-Guard® textured, chemically pretreated through a multiplestage washer, electrostatically applied, thermoset polyester powder coat finish, with
a minimum of 3-5 mil thickness. Finish is oven-baked at 400º F to promote maximum
adherence and finish hardness. All finishes are available in standard and custom
colors. Finish is guaranteed for five (5) years.
Electrical Assembly
• The Cross Bow Series is supplied with a choice of 350 to 1000 mA high-performance
LED drivers that accept 120v 50 Hz to 60 Hz, input.
• 10 kV surge protector supplied as standard.
Warranty
• Five (5) year Limited Warranty on entire system, including finish. For full warranty
information, please visit VisionaireLighting.com.
Options
• Button Type Photocell
• 0-10v Dimming Driver
• Dual Circuit
Listings
• Cross Bow Series is ETL listed, suitable for wet locations.
• LM79 and LM80
• RoHS compliant
• IP66 rated
• DLC Listed
• Powder Coated Tough™
Mounting
The Cross Bow Luminaire is easily attached to the pole by 2 tamper-proof countersunk
screws.
BASE DETAIL
IP66
ALTERNATE VIEW
ø0.390
ø3.125
R0.187
LED
1.125
Base Template:
0.625
ø6.500 Max.
Bolt Circle
ø6.000 Cen.
Bolt Circle
Aluminum Shaft 4" Square
for 3/8 Anchor Bolts
Typical Cross Section:
7.375
Recommended Footing, however job may require larger footings & rebar.
4.243
PLATE MUST BE
FULLY LEVELED
ø5.500 Min.
Bolt Circle
1.4375 Min
1.7500 Max
TOP OF THE PLATE
IS IDENTEFIED BY
LARGEST SURFACE
Scale:
1:1
4.243
Cross Bow 5K Lumen Data
# Of Sides
# Of LEDs
1
16
2
32
mA
Type 1
Type 2
Type 3
Type 4
Type 5
Type 5W
Wattage
350
1044
1085
1013
1173
1256
1296
17
530
1656
1721
1606
1860
1993
2056
25
700
2626
2730
2548
2950
3160
3261
34
1000
3532
3671
3426
3967
4250
4385
48
350
2088
2170
2025
2345
2512
2592
34
530
3311
3442
3212
3719
3985
4112
51
700
5252
5460
5095
5900
6320
6521
74
1000
7063
7342
6851
7933
8499
8770
118
Visit www.VisionaireLighting.com for up-to-the-minute chart information, including types not listed here.
* For 4000K multiply values by 0.90
19645 Rancho Way Rancho Dominguez, CA 90220
Tel: (310) 512-6480 Fax: (310) 512-6486
www.visionairelighting.com
Project Name:
Cross Bow LED
Catalog Number:
Type
Dimensional Drawings
A
B
4.00
C
A
A
B
D
4”
The Cross Bow LED Series continues the unique contemporary
design inspired by the sleek styling of the Bow™ family. Separating
the Driver(s) from the individual die-cast aluminum linear LED
engines: optimize the life of the LEDs and the Driver(s); and
maximizes the lumen output of the fixture.
The LED light assemblies come in multiples of 32 LEDs; and are
offered in up to 64 LED’s.
Model
Model
C-BOW-2
9 FT.
(9)
10 FT.
(10)
11 FT.
(11)
Optics
Type I
(T1)
Type II
(T2)
Type III
(T3)
Type IV
(T4)
Fixture
A
B
C
D
Max. Watts
C-Bow-2
Single
22”
2.5”
4”
3.25”
119
C-Bow-2
Double
40”
2.5”
4”
3.25”
232
Six optical distribution patterns are available. Choose between
3000, 4000 or 5000 Kelvin temperature of the LED’s.
A durable polyester powdercoat finish is guaranteed for five
years; and is available in standard or custom colors.
The Cross Bow LED series is an exceptional choice for
pedestrian scale lighting applications.
Source Current Kelvin Voltage Mounting
3000K 120-277 Anchor Base
# of LEDs mA
*Warm white
*Universal
C-BOW-2 350
voltage
(3K)
(AB)
(3)
(UNV)
32
(ANCHOR BOLT
KIT SUPPLIED)
(32LC)
*Single
64
(64LC)
*Double
530
(5)
700
(7)
1000
(10)
4000K
5000K
*Cool white
(5K)
(BZ)
Black
(BK)
*Neutral white
(4K)
Finish
Bronze
C-BOW-2 Comes standard
with a 12” x 12” base cover.
Smooth Black
(SBK)
White
(WH)
Smooth White
(SWH)
Graphite
Type V
(GP)
(T5)
Grey
Type V-W
Silver Metallic
(T5W)
Options
Button Type Photocell
*Specify voltage
(PC120)
(PC240)
(PC208)
(PC277)
Wireless Control
Consult Factory
(WC)
Dimming Control
Consult Factory
0-10v Dimming Driver
No Controls
(DIM)
Dual Circuit
*Doubles Only
(DC)
(GY)
(SL)
Custom Color
(CC)
For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LLC.
Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice.
Cross Bow
LED
Housing
• The LED light engines are constructed of heavy-duty, die-cast aluminum, with
external heat radiating fins. The 4” extruded pole contains the driver(s), allowing for
cooler operation and longer life. Silicone gasketing is utilized throughout the fixture for
weather tight operation.
Electrical Assembly
• The Cross BOW Series is supplied with a choice of 350, 530, 700 to 1000 mA highperformance LED drivers that accept 120v, 50 Hz to 60 Hz, input.
Thermal Management
• The Cross Bow Series provides excellent overall thermal management by maximizing
the fixture’s heat sink capabilities. This enables the Cross Bow Series to withstand
higher ambient temperatures and drive currents without degrading LED life. The Cross
BOW Series has a very low thermal resistance rating.
• The L70 test determines the point in an LEDs life when it reaches 70 percent of its
initial output. The Cross Bow Series LEDs have been determined to last a minimum of
140,000 hours in 25° C environments when driven at 350 mA.
Warranty
• Five (5) year Limited Warranty on entire system, including finish. For full warranty
information, please visit www.visionairelighting.com.
Optical System
• The highest lumen output LEDs are utilized in the Cross Bow Series. IES distribution
Types I, II, III, IV, V and V-W are available. LED light assemblies come with 32 LEDs.
The optical system qualifies as IES full cutoff to restrict light trespass, glare and light
pollution. CRI values are 70.
®
Quali-Guard Finish
• The finish is a Quali-Guard® textured, chemically pretreated through a multiplestage washer, electrostatically applied, thermoset polyester powder coat finish, with
a minimum of 3-5 mil thickness. Finish is oven-baked at 400º F to promote maximum
adherence and finish hardness. All finishes are available in standard and custom
colors. Finish is guaranteed for five (5) years
• 10 kV surge protector supplied as standard.
Options
• Button Type Photocell
• Wireless Control
• Dimming Control
• 0-10v Dimming Driver
• Dual Circuit
Listings
• Cross Bow Series is ETL listed, suitable for wet locations.
• LM79 and LM80
• RoHS compliant
• IP66 Rated
• DLC Listed
• Powder Coated Tough™
Mounting
The Cross Bow Luminaire is easily attached to the pole by 2 tamper-proof countersunk
screws. It also comes standard with a 12” x 12” base cover.
IP66
BASE DETAIL
Base Template:
Aluminum Shaft 4" Square
for 3/4 Anchor Bolts
Represents Typical Cross Section:
Footing shown is recommended, however job
specifications may require larger footings or rebar.
2.750 MIN
3.000 MAX
Scale:
1:1
WITH LEVELING NUTS
Represents Typical Cross Section:
Footing shown is recommended, however job
specifications may require larger footings or rebar.
2.000 MIN
2.250 MAX
WITHOUT LEVELING NUTS
Cross Bow 5K Lumen Data
# Of Sides
# Of LEDs
1
32
2
64
mA
Type 1
Type 2
Type 3
Type 4
Type 5
Type 5W
Wattage
350
2904
3019
2817
3262
3495
3606
34
530
3906
4060
3789
4387
4700
4849
51
700
5252
5460
5095
5900
6320
6521
74
1000
7063
7342
6851
7933
8499
8770
119
350
3720
3867
3609
4197
4476
4619
68
530
5900
6133
5724
6628
7100
7326
102
700
9359
9728
9079
10512
11261
11620
142
1000
14843
15430
14399
16673
17861
18430
232
Visit www.VisionaireLighting.com for up-to-the-minute chart information, including types not listed here.
* For 4000K multiply values by 0.90
19645 Rancho Way Rancho Dominguez, CA 90220
Tel: (310) 512-6480 Fax: (310) 512-6486
www.visionairelighting.com
visionairelighting.com
LED Garage Luminaire - Bow
Simple • Linear • Efficient... Bow LED
The Bow LED luminaire from Visionaire simplifies the task of selecting the best solution for LED parking garage lighting.
Simple
• Two key components, the driver housing and the linear LED arrays are used to complete the Bow.
• Separating the driver housing and the linear LED arrays optimizes the operational life of the LEDs and the Driver(s).
• Bow LED fixtures can be mounted without opening the driver housing. Simple right? See the Speed Mount
Bracket™ on page 7.
Linear
• Why is the Bow linear in shape? The linear separation of the LEDs in the Bow minimizes the heat transfer
between individual LEDs that is prevalent in a “clustered LED” fixture design. “Clustering” too many LEDs in a small enclosure creates heat.
• Pre-cast concrete parking structures have linear coffers. The Bow LED compliments this linear structure creating an
integrated lighting effect and high performance output.
• With two LED arrays in each fixture, the perceived light coverage is maximized for the parking structure pedestrian and driver.
Efficient
• Six different lumen packages combined with optics perfected for parking garage applications make the Bow LED an
efficiency machine.
• Minimizing the part count as mentioned above keeps the initial fixture costs efficiently low.
• Foot-candle levels are uniform at 30’x30’ spacing and greater in many cases.
• Cast aluminum construction with an IP66 rating ensures years of maintenance free illumination.
• Lighting control options enhance the energy savings already in place with the Bow LED luminaire.
All of the information needed to specify the Bow LED parking garage luminaire can be found on the following pages.
SIZE 1
SIZE 2
1.
Bow
Project Name:
LED
Catalog Number:
Type
Dimensional Drawings
Fixture
Patent No. USD688403S
The new Bow LED luminaire from Visionaire, simplifies the task of selecting
the best solution for LED parking garage lighting. The linear design of the
luminaire, compliments the linear design of the pre-cast concrete coffers;
creating an integrated lighting effect; and maximizes the perceived lighting
coverage. It is an ideal replacement for the high-maintenance fluorescent
fixtures of yesterday.
The LED light engines are die-cast aluminum with external heat radiating fins
for maximum heat dissipation; and is available in two sizes with either 32 or
64 LEDs. The separate cast aluminum driver compartment allows the driver
to operate cooler for long life. Available for pendant mounting, wall mounting
or choose the shallow speed mount bracket.
Model
BOW-1
Optics
Type I
(T1)
Type II
BOW-2
(T2)
64
(64LC)
Type III
(T3)
(3)
530
(5)
700
(7)
347
5000K
*Cool white
(5K)
Type IV
480
(5)
BOW-1
29½”
4”
5½”
32
18
46½”
4”
5½”
64
22
Mounting
Speed Mount
Bracket™
Ceiling Mount
(SMB)
This does not include
provision for conduit access.
Pendant Mount
12” (PM12)
24” (PM24)
36” (PM36)
Wall Mount
(T4)
(WM)
Type V
Up Light
Mount
(T5)
Type V-W
(T5W)
Lbs
The Bow LED series is an exceptional choice for parking garage lighting and
other ceiling mount applications.
4000K
(4K)
Max. LEDs
A durable polyester powder coat finish is guaranteed for five years; and is
available in standard or custom colors.
(UNV)
(8)
C
Six optical distribution patterns are available. Choose between 3000, 4000 or
5000 Kelvin temperature of the LED’s.
(3K)
*Neutral white
B
BOW-2
Source Milliamps Kelvin Voltage
mA
# of LEDs
3000K 120-277
*Universal
*Warm white
32
350
voltage
(32LC)
A
12” (UPL12)
24” (UPL24)
36” (UPL36)
*For indoor applications only.
*Pendant Mount only.
Finish
Fixture Finish
Smooth Black
(SBK)
Options
0-10v Dimming Driver
No Controls
(DIM)
Smooth White Motion Sensor/Control
(SWH)
Watt Stopper FSP-211
Silver Metallic
(SL)
Graphite
(GP)
8’ Mounting Height
Must specify Dimming Driver.
*120V-277V Only
(WSC-8)
8’ Mounting Height
(WSC-20)
9-20’ Mounting Height
(WSC-40)
21-40’ Mounting Height
This option will require(1) FSIR 100
remote for programing
Motion Sensor
On/Off
(MS)
Wireless Control
(WC)
Consult Factory
Bird Deterrent
*Works with Pedant Mount only
(BD)
Lightly Diffused Lens
(LDL)
For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LLC.
Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice.
Bow
Housing
The separate driver housing is constructed of cast aluminum with a cast aluminum
cover with captive fasteners; for easy access to the LED driver; allowing for cooler
operation and longer life.
Silicone gasketing is utilized throughout the fixture for weather tight operation.
Thermal Management
The BOW Series provides excellent overall thermal management by maximizing
the fixture’s dual heat sink capabilities. This enables the Bow Series to withstand
higher ambient temperatures and drive currents without degrading LED life. The
BOW Series has a low thermal resistance rating. The heat radiating fins create
superior thermal dissipation.
The L70 test determines the point in an LEDs life when it reaches 70 percent of its
initial output. The BOW Series LEDs have been determined to last a minimum of
100,000 hours in 25 °C environments when driven at 350 mA.
Optical System
The highest lumen output LEDs are utilized in the BOW Series. IES distribution
Types I, II, III, IV, V and V-W are available. LED light assemblies come in multiples
of 16 or 32 LEDs.
CRI values are 70.
Quali-Guard® Finish
A Quali-Guard® thermoset polyester powder coat painted finish is available in
standard and custom colors.
Mounting
A galvanized steel ceiling mount bracket can be secured directly to a recessed
junction box, or to the ceiling for surface mounting of the fixture. Mounting studs
extend from the bracket for easy mounting of the housing to the ceiling mount
bracket.
A cast aluminum mounting hub is supplied with a 3/8” NPT for pendant mount
applications.
Bird Deterrent
Electrical Assembly
The BOW Series is supplied with a choice of 350, 530 or 700 mA high-performance
LED drivers that accept 120v thru 480v, 50 Hz to 60 Hz, input. Power factor of
90%. Rated for -40°C to +55°C operations.
10 kV surge protector supplied as standard.
Warranty
Five (5) year Limited Warranty on entire system, including finish. For full warranty
information, please visit visionairelighting.com.
Options
• 0-10v Dimming Driver
• Watt Stopper FSP-211
• Motion Sensor
• Wireless Control
• Bird Deterrent
• Lightly Diffused Lens
Listings
• ETL Listed
• LM79 and LM80
• RoHS compliant
• IP-66 listed
• DLC listed
• Powder Coated ToughTM
Patent No. USD688403S
IP66
DesignLights Consortium (DLC) qualified Product. Some configurations of this product family may not be DesignLights Consortium (DLC)
listed, please refer to the DLC qualified products list to confirm listed configurations. http://www.designlights.org/
Up Light Mount
LED Data Chart for 5000K*
# LEDs
LED
Lumen Chart updated 08.21.17
mA
Type 1
B
U
G
LPW
Type 2
B
U
G
LPW
Type 3
B
U
G
LPW
Type 4
B
U
G
LPW
Type 5
B
U
G
LPW
Type 5W
B
U
G
LPW
Watts
350
4985
2
0
2
142
4710
1
0
2
135
4719
1
0
1
135
4512
1
0
1
129
4956
2
0
1
142
4809
3
0
1
137
35
530
7048
3
0
3
123
6660
2
0
2
117
6672
1
0
1
117
6380
1
0
2
112
7007
3
0
1
123
6799
3
0
1
119
57
700
8969
3
0
3
121
8475
2
0
2
114
8490
1
0
2
114
8118
2
0
2
109
8917
3
0
1
120
8653
3
0
2
116
74
1000
12310
3
0
3
113
11632
3
0
3
107
11653
2
0
2
107
11143
2
0
2
102
12240
3
0
2
112
11876
4
0
2
109
109
350
9785
3
0
3
133
9246
2
0
3
126
9263
1
0
2
126
8857
2
0
2
120
9729
3
0
1
132
9440
3
0
2
128
74
530
14157
3
0
3
131
13378
3
0
3
124
13402
2
0
2
124
12815
2
0
2
118
14077
3
0
2
130
13659
4
0
2
126
108
700
17690
4
0
4
125
16717
3
0
3
118
16746
2
0
2
118
16570
3
0
3
117
17589
4
0
2
124
17067
4
0
2
120
142
32
64
Visit www.VisionaireLighting.com for up-to-the-minute chart information, including types not listed here.
* For 4000K multiply values by 0.98 * For 3000K multiply values by 0.925
19645 Rancho Way Rancho Dominguez, CA 90220
Tel: (310) 512-6480 Fax: (310) 512-6486
www.visionairelighting.com
BOW Industrial - LED Luminaire Series
The New Industrial High and Low Bay LED Luminaires from Visionaire use innovative heat-sinking and cutting edge LED
technology to deliver a wide range of light output that replaces 250W to 1000W HID and four to eight lamp T5/T8 high
intensity fluorescent fixtures for High Bay applications depending on configuration. Choose from 2, 4, 6, or 8 independent
die-cast light engines with up to 1000 mA drivers, for maximum lumen output of over 110,000+ lumens in the BOW High
Bay, and 2 or 4 light engines in the BOW Low Bay for up to 58,000+ lumens.
Choose from Aisle Wide or Diffused, or Symmetrical Narrow 40°, Symmetrical Narrow Diffused 40°, Symmetrical Medium
90°, Symmetrical Medium Diffused 90°, Symmetrical Wide 120° or Symmetrical Wide Diffused 120° optics for all your High
or Low Bay apllications.
Construction
• All aluminum construction throughout provides lasting durability for the BOW Industrial Series.
• 2, 4, 6, or 8 die-cast light engines with external cooling fins for the Bow High Bay LED Luminaire
• 2 or 4 die-cast light engines for the Bow Low Bay
• The drivers are open to the air for cooler operation and longer life and are temperature rated for
-40° C to +65° C operations.
LED Technology
• 64, 128, 192, or 256 LEDs available in 350, 530, 700 or 1000 mA ratings.
• 3000, 4000 or 5000 Kelvin temperature are available.
• Eight distribution patterns offered ranging from aisle to symmetric distributions.
• Minimum of 100,000+ hours of life for the LEDs.
Applications
• The Bow Industrial LED Series can be used for a variety of High Bay applications such as warehouses, factories, retail
stores, and sports arenas.
BOW High Bay
LED
Project Name:
Catalog Number:
Type
A
B
Fixture
BHB-6
The NEW Visionaire BOW High Bay LED Luminaire is designed to efficiently light any large interior space such
as Factories, Aircraft Hangars, Warehouses, Distribution Centers, and many other large indoor spaces with
mounting heights of up to 70’. It combines the innovative design of individual heat sinks with cutting edge
LED technology; and makes an ideal replacement for conventional HID and fluorescent high bay systems.
This series offers higher efficacy than others in the past and can be combined with options such as wireless
controls and motion sensors for even increased energy savings and virtually no maintenance costs.
The 32 LED Light engines are die-cast aluminum with external heat radiating fins for maximum heat
dissipation. This innovative design uses 2,4,6, or 8 light engines (64 to 256 LEDs); operating with 350, 530,
700, or 1000 mA drivers; for a lumen output range of 13,000 to 114,000+ Lumens. The externally mounted
IP-67 Drivers operate cooler for long life and increased output. Improved thermal management of the Light
Bars, allows for up to 65°C ambient temperature ratings and -40°C minimum operating temperature; and
over 100,000 hours of life at L70.
Model
BHB-2
Optics
Aisle Wide
(AW)
Aisle
Diffused
(AD)
BHB-4
Symmetrical
Narrow 40°
(SN)
Symmetrical
Narrow
Diffused 40°
Source
# of LEDs
64
(64LC)
128
(128LC)
(SND)
BHB-6
Symmetrical
Medium 90°
(SM)
BHB-8
Symmetrical
Medium
Diffused 90°
(SMD)
Symmetrical
Wide 120°
(SW)
Symmetrical
Wide
Diffused 120°
(SWD)
192
(192LC)
256
(256LC)
Milliamps
mA
350
(3)
530
(5)
700
(7)
Kelvin
Voltage
3000K 120-277
*Warm white
(3K)
4000K
*Neutral white
(4K)
5000K
*Cool white
(5K)
*Universal
voltage
(UNV)
347
(8)
480
(5)
A
C
B
C
Max. LEDs
Lbs
BHB-2
19”
40”
6”
64
16
BHB-4
19”
40”
11”
128
30
BHB-6
19”
40”
15.5”
192
46
BHB-8
19”
40”
20”
256
59
Our sealed LED optics offer very uniform light distribution and are available in eight distribution patterns
of Aisle Wide, Aisle Diffused, Symmetrical Narrow, Symmetrical Narrow Diffused, Symmetrical Medium,
Symmetrical Medium Diffused, Symmetrical Wide and Symmetrical Wide Diffused. Choose from 3000, 4000,
or 5000 Kelvin temperature of the LEDs.
Mounting options include chain or cable ready as standard; ½1/2” threaded rod, and ¾3/4” conduit. Other
options include Motion Sensors, Emergency battery pack and 10’ & 15’ cords.
A full five year limited warranty is included on the entire system, including the polyester powder coat finish .
The NEW Bow High Bay Series makes an excellent choice for many different market applications.
Mounting
Cable Mount
(CBM)
*Cable Ordered Separately
*Hardware Not Included
1/2” Mount
(CPM)
*Threaded Rod And Nuts
Not Included
3/4” Conduit Mount
(CDM)
*Conduit Not Included
Finish
White
(WH)
Grey
(GY)
Options
Motion Sensor/FSP 211
Control Watt Stopper
must specify dimming driver
*Works with FSP-211
(WSC-8)
8’ Mounting Height
(WSC-20)
Mounting Accesories
Y-Cable With Hook
(YH5)
5’ Height
(YH10)
10’ Height
(YH15)
15’ Height
9-20’ Mounting Height
*To be ordered with CBM Mounting
21-40’ Mounting Height
Hook
(WSC-40)
This option will require(1) FSIR 100
remote for programing
Motion Sensor
(MS-8)
(HK)
*To be ordered with 3/4”
CDM Mount
8’ Mounting Height
(MS-20)
9-20’ Mounting Height
1000
(10)
(MS-40)
21-40’ Mounting Height
Wireless Control
(WC)
Consult Factory
Emergency
Battery Pack
*Universal Voltage only
(EBPL)
Wire Guard
(WG)
Cord
*5‘ Cord comes as standard
(10CD)
10’ Cord
(15CD)
15’ Cord
Dimming Leads
No Controls
(DIM)
For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LLC.
Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice.
24
BOW High Bay
Housing
• The LED light engines are constructed of heavy-duty, die-cast aluminum, with external heat
radiating fins.
• The exposed driver(s) allow for easy access and allow for cooler operation and longer life.
Thermal Management
• The BOW High Bay Series provides excellent overall thermal management by maximizing
the fixture’s heat sink capabilities. This enables the BOW High Bay Series to withstand higher
ambient temperatures and drive currents without degrading LED life. The BOW High Bay
Series has a low thermal resistance rating. The heat radiating fins create superior thermal
management results.
• The L70 test determines the point in an LEDs life when it reaches 70 percent of its initial
output. The BOW High Bay Series LEDs have been determined to last a minimum of 100,000
hours in 25 °C environments when driven at 350 mA. See LED Data Chart for additional test
results.
LED
Electrical Assembly
• The BOW High Bay Series is supplied with a choice of 350, 530, 700 or 1000 mA highperformance LED drivers that accept 120v thru 480v, 50 Hz to 60 Hz, input. Power factor
of 90%.
• Rated for -40 °C to +65 °C temperature operations.
• 10 kV surge protector supplied as standard.
• 5’ Cord as standard.
• 0-10v Dimming Driver is standard.
Warranty
• Five (5) year Limited Warranty on entire system, including finish. For full warranty information,
please visit visionairelighting.com.
Optical System
• The highest lumen output LEDs are utilized in the BHB Series. Distribution Types include
Aisle Wide, Aisle Diffused, Symmetrical Narrow 40°, Symmetrical Narrow Diffused 40°,
Symmetrical Medium 90°, Symmetrical Medium Diffused 90°, Symmetrical Wide 120° and
Symmetrical Wide Diffused 120°. LED light assemblies come in multiples of 32 LEDs.
• CRI values are 70.
Options
• Motion Sensor/Control Watt Stopper FSP-211
• Motion Sensor (On/Off)
• Wireless Control
• Emergency Battery Pack
• Wire Guard
• Cord
Quali-Guard® Finish
• The finish is a Quali-Guard® textured, chemically pretreated through a multiple-stage washer,
electrostatically applied, thermoset polyester powder coat finish, with a minimum of 3-5
millimeter thickness. Finish is oven-baked at 400º F to promote maximum adherence and
finish hardness. All finishes are available in standard and custom colors.
Listings
• UL/cUL listed UL 1598 Suitable for damp locations
• UL 8750 LED equiptment in Lighting Products
• Powder Coated Tough™
• DLC Listed
• Finish is guaranteed for five (5) years.
Mounting
Available standard for:
• Cable Mount
• 1/2” Mount
• 3/4” Conduit
DesignLights Consortium (DLC) qualified Product. Some configurations of this product family may not be DesignLights Consortium (DLC)
listed, please refer to the DLC qualified products list to confirm listed configurations. http://www.designlights.org/
BHB-2 W/EBPL
BHB-4 W/Motion Sensor
BHB-6
BHB-8
19645 Rancho Way Rancho Dominguez, CA 90220
Tel: (310) 512-6480 Fax: (310) 512-6486
www.visionairelighting.com
25
BOW Low Bay
LED
Project Name:
Catalog Number:
Type
BLB-2 Cable Mount
B
A
C
Fixture
The new BOW Low Bay LED Luminaire from Visionaire uses innovative heat-sinking with
all aluminum construction and cutting edge LED technology to deliver a wide range of
light output that replaces 250W to 1000W HID and four to eight lamp T5/T8 high intensity
fluorescent fixtures for Low Bay applications. Choose from 2 or 4 independent die-cast light
engines with up to 1000 mA drivers, for maximum lumen output of over 58,000+ lumens.
Our sealed LED optics offer very uniform light distribution and are available in five distribution
patterns of: Aisle Wide, Aisle Diffused, Symmetrical Narrow, Symmetrical Narrow Diffused,
Symmetrical Medium, Symmetrical Medium Diffused, Symmetrical Wide and Symmetrical
Wide Diffused. Choose from 3000, 4000, or 5000 Kelvin temperature of the LEDs.
Mounting options include chain or cable ready as standard, ½1/2” threaded rod, and ¾3/4”
conduit. Other options include Motion Sensors, Emergency battery pack and 10’ & 15’ cords.
Model
BLB-2
Optics
Aisle Wide
(AW)
Aisle
Diffused
(AD)
BLB-4
Symmetrical
Narrow 40°
(SN)
Symmetrical
Narrow
Diffused 40°
(SND)
Symmetrical
Medium 90°
(SM)
Symmetrical
Medium
Diffused 90°
(SMD)
Symmetrical
Wide 120°
(SW)
Symmetrical
Wide
Diffused 120°
(SWD)
Source
# of LEDs
64
(64LC)
128
(128LC)
Milliamps
mA
350
(3)
530
(5)
700
(7)
1000
(10)
Kelvin
Voltage
3000K 120-277
*Warm white
(3K)
4000K
*Neutral white
(4K)
5000K
*Cool white
(5K)
*Universal
voltage
(UNV)
347
(8)
480
(5)
A
B
C
Max. LEDs
Lbs
BLB-2
5”
40”
6”
64
16
BLB-4
5”
40”
11”
128
30
2 or 4 die-cast light engines with external cooling fins, for maximum heat dissipation for long
life of the LEDs. The drivers are open to the air for cooler operation. Temperature rated for
-40° C to +65° C operations. Improved thermal management of the Light Bars, allows for up
to 65°C ambient temperature ratings and -40°C minimum operating temperature; and over
100,000 hours of life at L70.
LED Technology
64 or 128 LEDs available in 350, 530, 700 or 1000 mA ratings.
3000, 4000 or 5000 Kelvin temperature are available.
Mounting
Cable Mount
(CBM)
*Cable Ordered Separately
*Hardware Not Included
1/2” Mount
(CPM)
*Threaded Rod and Nuts
Not Included
3/4” Conduit Mount
(CDM)
*Conduit Not Included
Trunnion Mount
(TM)
Finish
White
(WH)
Grey
(GY)
Options
Motion Sensor/FSP 211
Control Watt Stopper
must specify dimming driver
(Programmable)
Mounting Accesories
Y-Cable With Hook
(YH5)
5’ Height
(YH10)
10’ Height
(WSC-8)
(YH15)
(WSC-20)
*To be ordered with CBM Mounting
*Works with FSP-211
8’ Mounting Height
9-20’ Mounting Height
(WSC-40)
21-40’ Mounting Height
This option will require(1) FSIR 100
remote for programing
Motion Sensor
(On-Off)
(MS-8)
15’ Height
Hook
(HK)
*To be ordered with 3/4”
CDM Mount
8’ Mounting Height
(MS-20)
9-20’ Mounting Height
(MS-40)
21-40’ Mounting Height
Wireless Control
(WC)
Consult Factory
Emergency
Battery Pack
*Universal Voltage only
(EBPL)
Wire Guard
(WG)
Cord
*5‘ 3 Wire Cord
comes as standard
(10CD)
10’ Cord
(15CD)
15’ Cord
Dimming Leads
No Controls
(DIM)
For more detailed information on mounting, wiring or installation instructions, please consult factory. If poles are not ordered with fixtures, please specify mounting requirements. This document contains proprietary information of Visionaire Lighting LLC.
Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice.
26
BOW Low Bay
Housing
• The LED light engines are constructed of heavy-duty, die-cast aluminum, with external heat
radiating fins.
• The driver compartment allows for easy access, cooler operation and longer life.
Thermal Management
• The BOW Low Bay Series provides excellent overall thermal management by maximizing
the fixture’s heat sink capabilities. This enables the BOW Low Bay Series to withstand higher
ambient temperatures and drive currents without degrading LED life. The BOW Low Bay
Series has a low thermal resistance rating. The heat radiating fins create superior thermal
management results.
• The L70 test determines the point in an LEDs life when it reaches 70 percent of its initial
output. The BOW Low Bay Series LEDs have been determined to last a minimum of 100,000
hours in 25°C environments when driven at 350 mA. See LED Data Chart for additional test
results.
Optical System
• The highest lumen output LEDs are utilized in the BLB Series. Distribution Types include
Aisle Wide, Aisle Diffused, Symmetrical Narrow 40°, Symmetrical Narrow Diffused 40°,
Symmetrical Medium 90°, Symmetrical Medium Diffused 90°, Symmetrical Wide 120° and
Symmetrical Wide Diffused 120°. LED light assemblies come in multiples of 32 LEDs.
• CRI values are 70.
Quali-Guard® Finish
• The finish is a Quali-Guard® textured, chemically pretreated through a multiple-stage washer,
electrostatically applied, thermoset polyester powder coat finish, with a minimum of 3-5
millimeter thickness. Finish is oven-baked at 400º F to promote maximum adherence and
finish hardness. All finishes are available in standard and custom colors.
• Finish is guaranteed for five (5) years.
Mounting
Available standard for:
• Cable Mount
• 1/2” Threaded Rod
• 3/4” Conduit
LED
• Trunnion Mount
Electrical Assembly
• The BOW Low Bay Series is supplied with a choice of 350, 530, 700 or 1000 mA highperformance LED drivers that accept 120v thru 480v, 50 Hz to 60 Hz, input. Power factor
of 90%.
• Rated for -40 °C to +65 °C temperature operations.
• 10 kV surge protector supplied as standard.
• 5’ Cord as standard.
• 0-10v Dimming Driver is standard.
Warranty
• Five (5) year Limited Warranty on entire system, including finish. For full warranty information,
please visit visionairelighting.com.
Options
• Motion Sensor/Control Watt Stopper FSP-211
• Motion Sensor (On/Off)
• Wireless Control
• Emergency Battery Pack
• Wire Guard
• Cord
• Dimming Leads
Listings
• UL/cUL listed UL 1598 Suitable for damp locations
• UL 8750 LED equiptment in Lighting Products
• Powder Coated Tough™
• DLC Listed
DesignLights Consortium (DLC) qualified Product. Some configurations of this product family may not be DesignLights Consortium (DLC)
listed, please refer to the DLC qualified products list to confirm listed configurations. http://www.designlights.org/
BLB-2 3/4” Conduit Mount
BLB-4 Trunnion Mount
BLB-2 1/2” Mount
BLB-4 Cable Mount
19645 Rancho Way Rancho Dominguez, CA 90220
Tel: (310) 512-6480 Fax: (310) 512-6486
www.visionairelighting.com
27