commercial shower systems

COMMERCIAL SHOWER SYSTEMS
2.5 GPM SHOWER SYSTEM KIT
WITH SLIDE-GRAB BAR, HAND SHOWER, SHOWERHEAD & TUB SPOUT
MODEL NUMBER:
❏ 1662SG.224 Commercial Shower System Kit
Includes:
• Universal pressure balance Shower Valve with screwdriver stops
• Colony Soft Shower Only Trim
with showerhead
• 3-Function Hand Shower
with Pause Feature
• In-Line Vacuum Breaker
• Metal Hose
• Wall Supply
• 36" Slide-Grab Bar
• 3-Way Diverter Valve
• Heritage Diverter Handle
• Slip-On Tub Spout
GENERAL DESCRIPTION:
Complete commercial shower system includes: an R121SS
pressure balance valve and trim, a wall supply with 1/2" NPT
female inlet and 1/2" NPSM male outlet, a 59" (1500 mm)
metal shower hose, vacuum breaker, a 3-function hand shower
with pause feature, 3-way diverter valve, showerhead, slip-on
tub spout and a 36" slide-grab bar.
Valve features a cast brass body, washerless 47 mm ceramic
disc valve cartridge with volume and temperature control,
back-to-back capability, integrated check valves and hot limit
safety stop. Pressure balancing cartridge maintains constant
output temperature in response to changes in relative hot and
cold supply pressure. Universal inlets/outlets. With screwdriver
stops. Rough-in plaster guard designed for use as thin wall
mounting adapter. Durable metal handle. 3-function water
saving hand shower with pause feature and 1.5 gpm/5.7 Lmin.
flow restrictor. Slide bar features an adjustable hand shower
holder which can be set at any height or position along the bar
and angle up to 45˚.
FLOW RATE
GALLONS PER MINUTE
3
2
T675.501.002
1660.767.002
1660.400.002
8888.035.002
8888.037.002
1660.236.002
R433
T342.430
8888.056
PRODUCT FEATURES:
VALVE:
Universal Inlets / Outlets: 1/2" NOM Copper Sweat or 1/2"
NPT.
Cast Brass Valve Body: Durable. Ideal material for
prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance. Allows easy control over both
water temperature and volume.
Pressure Balancing Valve Cartridge: Maintains constant
output temperature in response to changes in relative hot
and cold supply pressure. Diaphragm system with integrated
check valves engineered to eliminate cross flow. Avoids
failure due to mineral deposits - ideal for use in hard water.
Back-to-Back Capability: Hot and cold can be reversed
quickly and easily.
Adjustable Hot Limit Safety Stop: Limits the amount of hot
water allowed to mix with cold. Reduces the risk of accidental
scalding.
Exclusive Plaster Guard: Plaster guard is designed to
protect valve during installation and serve as a mounting plate
for thin-wall installations. Two-piece design allows valve to be
tested prior to trim installation.
Wide Rough-in Range: From 1-5/8" to 3-1/4".
PERSONAL SHOWER: ADA-Compliant: Non-positive shut-off button on handle
reduces flow to a trickle.
1
0
R121SS
20
40
60
80
100
INLET PRESSURE (PSI)
SLIDE-GRAB BAR:
Stronger Than Standard Slide Bars: 1-1/2" diameter
stainless steel bar meets ANSI standard 250 lb. pull test.
Chrome-plated hand shower holder with ADA
compliant lever handle.
SUGGESTED SPECIFICATION
Shower system shall feature a wall supply with 1/2" NPT female inlets and 1/2" NPSM male outlet, 59" metal hose, vacuum
breaker, 2.5 gpm/9.5L/min. 3-function hand shower with pause feature, 3-way diverter valve, showerhead, slip-on tub spout and
a 36" slide-grab bar. Pressure Balance valve shall feature a cast brass body. Shall feature ceramic disc valve cartridge which
controls water temperature and volume. Shall also feature hot limit safety stop. Fitting shall be American Standard Model # 1662SG.224.002.
© 2016 AS America Inc.
Revised 11/16
COMMERCIAL SHOWER SYSTEMS
2.5 GPM SHOWER SYSTEM KIT
WITH SLIDE-GRAB BAR, HAND SHOWER, SHOWERHEAD & TUB SPOUT
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
ASSE 1016
CSA B 125
ANSI A117.1
Finish
Product
Number
Polished
Chrome
Description
002
Commercial Shower System Kit. Contains pressure balance valve with volume and temperature
1662SG.224 control,trim kit, 3-function hand shower with pause feature, metal hose, vacuum breaker, wall
supply, 3 -way diverter, showerhead, slip-on tub spout and 36" slide-grab bar. 2.5 gpm/9.5 L/min.
INLETS 1/2"
NOM. COPPER SWEAT
or 1/2" NPT
(R121SS)
"SEE ILLUSTRATION BELOW"
6"
(153 mm)
ALL CONNECTIONS 1/2" NPT
(R433)
66 mm MAX.
(2-5/8")
5-7/8"
(149 mm)
FINISHED
WALL
3"
(76 mm)
4-1/16"
(103 mm)
6-3/4"
(171 mm)
32 mm (1-1/4")
DIA. HOLE
MOUNTING
BRACKET
FINISHED WALL
102 mm
(4") REF.
1/2" NPT
SHOWER
ARM
13 mm (1/2")
INLET:
1/2" NPT
1829 mm (72")
to 1990 mm (78")
(OPTIONAL)
TO FINISHED
FLOOR
© 2016 AS America Inc.
41 mm MIN.
(1-5/8")
2-1/2"
(64 mm)
3"
(76 mm)
1/2" COPPER
32 mm(1-1/4")
DIA HOLE
OUTLET:
1/2" NPSM HOSE
CONNECTION
RUBBER GASKET
FINISHED WALL
FINISHED
WALL
79 mm
(3-1/8") DIA.
206 mm
(8-1/8")
FINISHED
79 mm
WALL
(3-1/8") DIA.
FINISHED
WALL
32 mm
(1-1/4")
53 mm
(2-1/16")
57 mm HOLE SIZE
(2-1/4")
2-3/4"
(70 mm)
178 mm
(7") REF.
130 mm
(5-1/8")
REF.
70 mm
(2-3/4")
71 mm
(2-3/4")
79 mm
(3-1/8") DIA.
914 mm
(36")
41.5 mm
(1-5/8")
84mm
(3-5/16")
954 mm
(37-1/2")
1/2" NPSM
FINISHED
FLOOR
OPTIONAL TO FINISHED FLOOR
USUALLY BETWEEN
915 mm TO 1525 mm
(36")
(60")
Revised 11/16