C8000 cover back sp FA.ai

ITECPRESS
ITEC
PRESS
C8000
The high-level digital press
for high-value solutions.
80
80
Black and White
*Printing speed may vary
according to the paper weight.
Not just added value, an added edge
for digital printing professionals.
ITECPRESS
ITEC
PRESS
C8000
The next-generation flagship model that holds unlimited
digital printing potentials to meet the high-level
needs of professionals.
High image quality and definition nearly equal to offset printers,
achieved with the further advanced S.E.A.D. II image processing technology
Outstanding image retention and stability through the pursuit
of consistently beautiful quality from the first print to the last
More business opportunities with enhanced media handling
High productivity to meet short runs with ease
High reliability and durability for professional confidence
High performance, productivity and added value with various in-line post-processing
finishing options
Digital printing workflow
Create
Submit & Accept
Job Scheduling
Create Auto Quotation
Pre-Press
Pre-flight
Make Ready
Press
Post-Press
Colour/BW Split
Universal Print Management
Customer
Web Service
Online Job Tracking
2 ITEC PRESS C8000
Make Ready
Inline Finishing
Deliver
Billing
Print Management
Workflow/Job Management
Per-job Cost Analysis
ITECPRESS
ITEC
PRESS
ITEC PRESS creates new values for
printing businesses by providing
innovations through high-level
technologies and a new workflow in
digital printing based on high quality
products and services that offer high
value-added total solutions.
ITEC PRESS C8000 3
High image quality nearly equal to offset printers.
For Digital Print Professionals
With the further advanced S.E.A.D. II image
processing technology, 1,200 dpi 8-bit high
Image quality and definition advance to
a higher dimension.
definition outputs, the pursuit for
S.E.A.D. II – a condensation of the latest
image-processing technologies
outstanding image retention and stability,
S.E.A.D. (Screen-Enhancing Active Digital Processing) II is an
accumulation of various advanced digital image-processing
technologies condensed in a single system ă including
multi-layer expressions at 8 bits per pixel, and dot position
control technology which segments each pixel at 1/256 size ă
achieving high image quality, and image retention and stability
that are nearly equal to offset printing.
and natural lustre with Simitri HD+ (plus)
toner, and more, ITEC PRESS C8000 brings
new possibilities to digital printing with high
image quality nearly equal to
offset printing.
S.E.A.D. II's 3 advanced technologies – high image quality,
high stability and high productivity at a higher dimension.
1
<NEW> HI-PER ASIC
An exclusive ASIC that offers a range of digital
imaging processes.
<NEW>
CRS2 Technology
An image stabilising
system that
maintains high image
quality through
feedback about
changes in the main
unit’s characteristics.
<NEW> IT bit Technology
A high level image processing technology including
dot position control, multi-bit screening, 1,200 dpi
8-bit data processing, and outline processing.
1 ASIC: Application-Specific Integrated Circuit
2 CRS: Colour Retention and Stability
1,200 dpi 8-bit resolution data processing and
1,200 dpi x 1,200 dpi resolution high precision printouts
In addition to high precision printouts at real 1,200 dpi
resolution for outstanding reproductions of fine characters
and thin lines, C8000 realises full-colour 8-bit multi-layer data
processing, providing more accurate reproductions of fine
details. And with the combination of Simitri HD+ (plus) toner,
C8000 pursues reproduction quality that is nearly equal to
offset printers.
1,200dpi 8-bit
1,200dpi 8-bit
Access
Access
Address: 2010 South Avenue, KM City
TEL:02-86X9-5XX8 OPEN/11:00~20 :00 CLOSE/MONDAY
Address: 2010 South Avenue, KM City
TEL:02
Bank
-86X9-5XX8 OPEN/11:00~20
Bank
Hospital
School
Hospital
School
RIP data
Controller
4 ITEC PRESS C8000
Data
compressed
Data
restored
Engine
Simitri HD+ toner – a combination of high quality
images and high productivity
The Simitri HD+ (plus) toner is newly developed for C8000Ês
high productivity as well as pursuing higher image quality. In
addition to providing high speed colour outputs of up to 80
ppm*, as well as low temperature fusing for better productivity
for a variety of paper types including thick paper, C8000
achieves natural lustrous results similar to offset printing.
New aluminium die-cast laser unit
In order to enhance the writing accuracy of the 1-chip/8-beam
laser used as the light source, C8000 employs an aluminium
die-cast laser unit housing and polygon housing which is less
affected by the installation environment. To further improve
writing accuracy, the main body side adjustment mechanism
turns and adjusts the entire print head to keep it constantly
parallel with the drum.
*: 64~135 g/m2 A4 paper.
Structure of Simitri HD+
Pigment
Ultra thin-film
core shell
Wax
The pursuit for consistently beautiful quality from the first print to the last
with outstanding image retention and stability
IDC sensors for real-time
colour density adjustments
The IDC (Image Density Control) sensors read patches of
CMYK, which are created between the images, providing
real-time feedback control during continuous printing. The
maximum densities and half-tone densities are adjusted
automatically to achieve image stability without affecting
performance. Furthermore, automatic correction offers
efficiency to maintain stable image quality.
A4 or 5.5 x 8.5 inch
image area
New gradation correction with colour density
control that reflects the 2nd transfer/fusing
changes and varied characteristics of papers
through an output paper density sensor
The newly developed gradation correction function meets the
varied characteristics of output papers. It offers detailed
gradation corrections according to the type of paper used by
printing charts which are read by a colour density sensor built
into the RU-508 Relay
Unit.
The
correction
Sensor
values can be set for up
to 15 paper categories,
including, coated, plain,
and high quality papers,
for gradation corrections.
New density balance adjustment function for
consistently stable densities for printouts
Density patches
Intermediate transfer belt
Drum
C8000 is equipped with a density balance adjustment function
that adjusts the image for consistent density. It prints a
specified colour patch chart where the data is read by a
spectrophotometer* and transferred to the C8000 via PC and
USB memory, realising printouts that are adjusted for
consistent densities.
* Optional x-rite i1 iSis XL or i1
Uneven density
print out
C8000
Yellow
Black
2nd transfer belt
Magenta
Cyan
IDC sensors
Density balance
adjustment chart sizes.
Limited to 4 sizes: A3,
SRA3, 11"x17", 12"x18"
The following sizes can be read
by x-rite's spectrophotometer.
i1i Sis XL scanning paper width:
6 to 33 cm (2-1/2" to 13".)
Scanned data via USB
memory for uneven
density adjustments
ITEC PRESS C8000 5
New potentials for the printing business.
For Digital Print Professionals
With a maximum 350 g/m2 thick paper
compatibility, a hybrid decurling mechanism
that reduces curls for various paper types,
flexible media handling for 500 types of
paper profiles, and more, ITEC PRESS C8000
More business opportunities with
enhanced media handling
Maximum of 350 g/m2 thick paper compatibility
C8000 offers printing on paper of up to 350 g/m2* thick so its
use can be expanded into new business fields that require
thick papers such as packages and cards.
*40 ppm in colour (A4) when using the optional PF-704/PF-705 Paper Feeder Units.
provides high productivity to meet short
runs, creating new business opportunities to
digital printing.
Up to 500 types of paper profiles
C8000Ês paper profile can register up to 500 types of paper
allowing the appropriate setting for each paper type. It can
also be synchronised with an image controller equipped with a
paper catalogue (such as IC-306) for modifications to the
information of paper that is already registered in the paper
profile.
Air suction belt feeding mechanism for the
pursuit of sure paper feeding for a wider variety
of media
C8000Ês PF-704* and PF-705* Paper Feeder Units adopt an air
suction belt feeding mechanism which delivers air to both the
front and sides so each paper can be delivered by the belt
separately, achieving a high level of feeding accuracy for a
wide variety of paper types and weights including coated
paper and art paper.
* Optional
Suction Belt
Side Air
Separation Air
Side Air
Maximum paper size and printing area for
printing full crop marks on A3 paper
6 ITEC PRESS C8000
321mm
*When paper feeding with the
optional PF-704 and/or PF-705
Paper Feeder Units using a small
size paper guide for 100 mm to
139 mm size paper.
330mm
C8000 is compatible with paper sizes up to 330 mm x 487
mm allowing the printing of crop marks on paper as small as
100 mm x 139 mm* to A3 size sheets. And with a maximum
printing area of 321 mm x 480 mm, it can combine bleed printing
487mm
with saddle stitching and
perfect binding of covers for
480mm
A4 size paper.
A hybrid decurling mechanism that significantly
reduces paper curls
The RU-508 Relay Unit is equipped with a mechanical
decurler with a zigzag paper passage that reduces paper
curls. The decurling strength can be adjusted in 5 stages in
both directions. Furthermore, the newly developed HM-101 ICE
(Inter-cooler Curl Eliminator)* prevents curling by maintaining
the proper paper moisture through humidification after
printing. The standard mechanical decurler is effective for
coated paper, while both it and the optional ICE are
effective for uncoated paper. Such high degree of decurling
prevents waviness of pages and upward warping of
booklets for a finer quality finish.
High productivity to meet short runs
with ease.
Maximum 80 ppm high-speed colour printing (A4)
C8000 achieves high-speed colour outputs at 80 pages per
minute (ppm) (A4) for the most frequently used 64 to 135
g/m2 paper weights, boasting high productivity for creating
simple leaflets to multi-page booklets.
* Optional
ICE (Inter-cooler Curl Eliminator)* for effective
neutralisation of static electricity and heat
removal for a surer post-processing workflow
Another benefit of the ICE is that it offers effective
neutralisation of static electricity and heat removal. Static
electricity neutralisation solves problems such as clinging
among the papers and electrostatic shock to the users.
Heat removal cools the output paper, preventing heat
storage which may cause tacking among the images during
large volume loading.
* Optional
Decurling mechanism
Mechanical decurler – exit section
Strength-adjustable zigzag passage will
resolve various paper curls.
70 ppm (A4) and automatic duplex printing for
thick paper up to 300 g/m2
C8000 also offers high speed printing of 70 ppm (A4) for
thicker paper between 136
to 300 g/m2. And C8000
maintains high productivity
with automatic duplex
printing for paper weights
from 64 to 300 g/m2.
Mechanical decurler – input section
The input section of the mechanical decurler is for thin
paper. (This path will be bypassed for thick paper.)
Humidifier type decurler
(ICE (Inter-cooler Curl Eliminator))
(HM-101)
Fan
Fan
Water supply
roller
Maximum 10,760-sheet paper capacity
C8000Ês main unit provides three levels of 500-sheet paper
trays, for a storage total of 1,500 sheets. Furthermore, by
connecting the 4,630-sheet capacity PF-704* and PF-705*
Paper Feeder Units, or even two PF-704s*, C8000 offers a
maximum paper capacity of 10,760 sheets. As paper feeding
is even available during operation, C8000 eliminates the
downtime needed for paper replacements so it can handle
large-volume printing orders with ease.
* Optional
Note: All paper capacities mentioned are for 80 g/m2 paper.
500 sheets
500 sheets
Water
1,390 sheets
Humidifying roller
Water
1,390 sheets
1,390 sheets
500 sheets
1,850 sheets
1,390 sheets
1,850 sheets
ITEC PRESS C8000 7
Solid and flexible.
For Digital Print Professionals
With a highly rigid frame and chassis for the
body, high precision duplex registration
skew correction, a dual fusing system, and
High reliability and durability that meet
your professional needs
Highly rigid frame, chassis and parts, and
long-life units and consumables
more, ITEC PRESS C8000 boasts numerous
highly reliable designs along with controllers
and finishing systems to complement your
business. Strength and flexibility are
combined for professional confidence.
C8000 adopts a highly rigid frame, chassis and parts to
prevent torsional damage to its body as well as pursuing
strength and durability. In addition, it realises a longer life
for the units and consumables with about 1.5 times more
for the developerÊs and drumÊs life cycles and about 2.5
times more for the
tonersÊ life cycles over
previous models.
High precision duplex registration skew
correction that meets a wide variety of paper
types
A high precision duplex registration skew correction is used
to enhance image-positioning accuracy for duplex printing.
As the skew detecting sensors sense the skew amount
after the leading edge of the paper passes the loop rollers,
the front and rear loop rollers are driven independently to
correct the paper skew during paper feeding, providing high
precision registrations for a wide variety of paper types.
Registration unit
Registration roller
Rear loop roller
Skew detecting
sensor
Registration
sensor
Front loop roller
C8000
Alignment of the front
and back pages will not
shift during duplex
printing (front and back
page crop marks are
more accurately
aligned)
Back page
Front page
Without registration skew correction
Front and back page
crop marks are
improperly aligned.
8 ITEC PRESS C8000
New dual fusing system for a variety of
paper types
A choice of three image controllers to meet
your business
A single pass duplex fusing system to enhance productivity
for coated and thick papers, as well as provide a more
lustrous finish has been developed. For certain paper types,
such as thin paper, which do not require second fusing, this
process will be bypassed, therefore providing the right fusing
needs according paper
type.
2nd Fuser Unit
Single pass duplex
fusing (belt)
Lower heat roller
Upper heat roller
Bypass for
thin paper
IC-306
1st Fuser Unit
New IC-306 image controller for a wide variety of
digital on-demand printing
Significantly reduced downtime with O.R.U.M.
(Operator Replaceable Unit Management)
C8000 allows you to manage the units, replace parts, make
adjustments and clean up when you
need, to maximise its operating time.
This helps to maintain image quality
and contributes to reduced downtime
for maintenances according to its use.
Layout-free large 15-inch colour LCD display
To meet the varied usage environments, C8000 offers a
remote-type touch-panel display that can be placed
anywhere on the top of the
machine. The controller monitor
can also be placed parallel to
the display monitor. For added
safety, four locations for fixing
are provided to prevent the
display from accidentally falling.
The new IC-306 is a C8000-exclusive Fiery image controller
from the market-renowned EFI Inc. It adopts the new Core
software System 9 to provide stable outputs. In addition to
providing 1,200 dpi resolution and 80 ppm (A4)*, IC-306
allows you to check the quality of the print-in-progress by
printing sample pages from a different paper tray without
interrupting the printing process. It even incorporates a
function that automatically forces out unused tabbed papers
that are left behind in a paper tray from a previous job.
IC-306 also includes a built-in paper catalogue that allows it
to set the paper trays for the C8000.
New software includes:
Fiery Driver 4.0 (Windows and Mac)
Command WorkStation 5 (except Windows 2000 and Mac
OS 10.3.9)
SeeQuence v1 ( Impose + Compose + Preview )
Color Management
VDP (Variable Data Printing) Resource Manager v5
Hot Folders v3 (except Windows 2000 and Mac OS 10.3.9)
Clone Tool v1
* Printing speed will vary according to paper weight.
IC-307 image controller – advanced digital printing
for commercial printers
IC-307 image controllerÊs powerful functions include the
Creo Colour Server ă highly evaluated for its high-speed
processing and stable colour management ă with JDF
connectivity, easy VDP (Variable Data Printing) file creator,
and improved perfect binder support.
IC-601 image controller – compact with
high connectivity to the main unit
Notifications through voice guidance
C8000 provides notifications such as toner replacement or
improper settings of specified papers with an easy-to-hear
voice guidance as well as alarms. As the details of the
C8000Ês conditions are conveyed more directly than an
alarm, the voice guidance helps to enhance work efficiency.
IC-601 is the standard original image controller with
complete colour management functionality and strong
connectivity to C8000. It offers various highly functional
features including high-speed RIP processing, enhanced
colour image reproduction, high speed image transfers, and
compatibility with the main unit for job control and editing
functions with the C8000Ês operation panel.
ITEC PRESS C8000 9
Various in-line post-processing system options.
For Digital Print Professionals
High performance, high productivity and high added value finishers
Hole punching, folding, stapling, saddle stitching
and perfect binding can be chosen in a single system
Up to six types of finishers ă each with the necessary
functions including hole punching, various folding, saddle
FS-612 Saddle Stitching Finisher
FD-503 Folding Unit
Centre-fold
Centre-fold
Two holes1
Saddle-stitch
Four holes1
Stapling
Paper
insertion2
stitching and perfect binding ă can be chosen in a single
system, allowing you to configure the ITEC PRESS C8000
according to their purposes.
Letter fold-in
1
With the
PK- 512 attached
2
With the PI-502
attached
FS-612 has a maximum stapling capability of 50
sheets of paper*, and can saddle-stitch 20 sheets*
or 80 pages. Centre folding and letter folding are
also standard. It can also be expanded with the
optional PK-512 punch kit and/or PI-502 post inserter.
FS-521 Stapling Finisher
Letter
fold-in
Letter
fold-out
PB-503 Perfect Binder
Z-fold
Gate-fold
Perfect binder
Doubleparallel
Two holes
Four holes
Paper
insertion
In addition to six different folding functions
(centre-fold, letter fold-in, letter fold-out, double
parallel, Z-fold, and gate-fold), FD-503 offers a hole
puncher and post inserter as standard. It can
manually process already-printed documents as well.
PB-503 handles a maximum of 300 sheets or a
thickness of less than 30mm to provide perfect
binding of books. Even gluing can be done in-line.
And paper alignment technology offers fine
binding of books without having to rely on
three-way trimming.
GP-501 Multi Punch Unit
SD-506 Saddle Stitcher Unit
(Optional die set is required)
A4 size punch patterns [10 different styles]
2-point
2-point
stapling
stapling
(vertical side) (horizontal)
Corner
stapling
(vertical)
Corner
stapling
(horizontal)
FS-521 provides corner stapling and two-point
stapling for a maximum of 100 sheets of paper*. In
addition, an in-line clinch cuts the long staples for
documents with fewer pages to provide a clean finish.
* When using 80 g/m2 paper
10 ITEC PRESS C8000
Multi-centre-fold
Multi-letter-fold
Saddle-stitch
Trimming
SD-506 can handle a maximum of 50 sheets of paper*
to produce booklets of up to 200 pages. In addition
to highly accurate saddle-stitching with fewer page
shifts, edge trimming is also standard. Furthermore,
multi-centre-folding and multi-letter-folding can be
processed for a maximum of 5 sheets*.
With an exchangeable
die set (punch marks), a
variety of hole-punching
styles are available for
A4 paper. (Not available
for all areas)
Punch Kit PK-512
O.R.U. (Operator
Replaceable Unit)
Kit OR-101
Humidifier HM-101
Main body
configuration 1
Post Inserter PI-502
Image Controller IC-306 5
Dehumidifier HT-506
Image Controller IC-307 6
For z/705
Available soon
Image Controller IC-601 7
Available soon
Hard Disk Kit HD-514
For IC-601/PF-705
Preview Kit PH-101
Finisher
FS-612
Relay
Unit
RU-506
Multi
Punch
GP-501 2
Relay
Unit
RU-508
ITEC PRESS
C8000 3, 4
2nd Fuser
Unit
EF-101
Paper Feeder
Unit PF-704
Paper Feeder
Unit PF-705 7
1
Main body = ITEC PRESS C8000 + 2nd
Fuser Unit EF-101 + Relay Unit RU-508
available in all areas.
3 Either Image Controller IC-306 or IC-307
or IC-601 must be selected
4 One of the following must be selected:
PF-704 or 2 x PF-704 or PF-705 or
PF-705 + PF-704
5 Upgrade kit UK-102 (dongle) is necessary.
6 Upgrade kit UK-103 (dongle) is necessary.
7 Hard Disk Kit HD-514 and Preview Kit
PH-101 are needed together.
2 Not
Finisher
FS-521
Perfect Binder
PB-503
Saddle Stitch
SD-506
Large Capacity
Stacker LS-505
Folding Unit
FD-503
1,653
C8000
IC-306
FS-521
5444
PB-503
1,360
SD-506
1,170
FD-503 RU-508
HM-101
4004
410
EF-101
497
9001
PF-704
PF-704
HT-506
HT-506
996
996
1,038
1,3193
1,020
1,231 (FD-503)
C8000 System Configuration Example Main body (including EF-101+RU-508) +HM-101+FD-503+SD-506+PB-503+FS-521+PF-704+HT-506+PF-704+HT-506+IC-306+UK-102
212
800
9502
7,485
* Dimensions and configurations may be subject to change. The actual installation space required may also vary slightly due to the connection parts for each option.
Dimensions (mm)
and weight (kg)
C8000 main body
EF-101
RU-508
PF-704
PF-705
FS-521
FD-503
SD-506
PB-503
LS-505
FS-612
GP-501
RU-506
PI-502
IC-306
Width
9001
497
410
996
996
5444
4004
1,170
1,360
785
4244
300
350
511
212
Depth
9502
774
735
772
772
723
723
775
775
723
656
775
775
220
488
Height
1,3193
1,020
1,020
1,038
1,208
1,020
1,231
1,020
1,223
1,020
990
1,020
1,020
620
482
Weight
450
95.5
80
212
242
80
130
280
270
110
65
80
47
10.5
20
1
Excluding operation panel and working table
Maximum depth 950mm (including rear side duct)
Excluding operation panel
4 Excluding main tray
2
3
ITEC PRESS C8000 11
ITEC PRESS C8000 General Specifications
Model Name
ITEC PRESS C8000
Image Loss
4mm or less for top/bottom edges,
3mm or less for right/left edges
Type
Console
Warm-up Time
420 sec. or less
Colour Support
Full colour
Resolution
Scan: 600 x 600dpi (option)
Print: 1,200 (equivalent to 3,600) x 1,200dpi
Memory
DIMM: 512MB x 6
HDD: 160GB x 6 SATA (option)
Print Speed2 (A4/Letter)
Full Colour: 80ppm
B/W: 80ppm
Paper Capacity
Tray 1, 2, 3: 500 sheets each
Paper Weight
64 to 300 g/m2,
PF-704/705: 64 to 350g/m2
Gradation
256
Power Consumption
Less than 6kW
Dimensions
1,807mm3 x 950mm4 x 1,319mm5
(71-1/4" x 37-1/2" x 52")
Weight
C8000: 450kg (992lb),
EF-101: 91kg (200-1/2lb),
RU-508 : 80kg (176-1/4lb)
Space Requirements [W] x [D]
5,1966, 8 x 1,5847, 8mm (204-3/4" x 62-1/2")
(C8000 + EF-101 + PF-704 + RU-508 +
LS-505 + PB-503 + IC-306)
1
Paper Size
SRA3, A3, B4, SRA4, A4, SRA4S1,
A4S1, B5, B5S1, A5S1,
12" x 18", 11" x 17", 8.5" x 11",
irregular sizes (330 x 487 to 140 x182mm)
Multiple Print
1 to 9,999 sheets
S : Short edge feed
Printing speed may vary according to the paper weight.
Including RU-508 and EF-101.
4 Including back side duct.
5 Excluding operational panel.
6 Supposing Image Controller IC-306 is positioned 5 mm to
the side of Paper Feeder Unit
7 With the fixing conveyance unit pulled out
8 Keep 500 mm (19-3/4") or more space free on the back, and
100 mm (4") or more on both sides of the machine.
2
3
Auto Duplex (Type)
Stackless ADU Standard
Power Requirement
220 to 240V 24A (50 to 60Hz)
Optional Controller function
Model
Type
CPU
Memory
IC-3062 (EFI)
Server
Core 2 Quad Q9400 2.66 GHz
2GB
HDD
Print Speed1 (A4 /Letter)
Print Resolution
PDL
160GB SATA
80ppm
1,200 x 1,200dpi, 600 x 600dpi
PostScript3 CPSI3017 PDF1.7
TIFF PPML VPS
Protocol
TCP/IP, SNMP, IPP, FTP, SMB,
AppleTalk (EtherTalk), Bonjour
Windows 2000
Windows XP
Windows Server2003
Windows Vista
Windows 7
Windows Server2008
MacOSX 10.3.9
MacOSX 10.4 or later
PS: 136 fonts
TCP/IP, SMB, LPR,
Bonjour
Windows XP
Windows Server2003
Windows Vista
Windows 7
Windows Server2008
MacOSX 10.3.9
MacOSX 10.4 or later
10/100/1000Base-T
212mm x 488mm x 482mm
(8-1/2" x 19-1/4" x 19")
10/100/1000Base-T
180mm x 555mm x 445mm
(7-1/4" x 21" x 17-1/2")
Operating System
Fonts
Interface
Dimensions
1
4
IC-3073 (Kodak)
Server
I7-860 Quad Core, 2.80GHz
5GB (System Memory: 2GB
Image Memory: 3GB)
500GB x 4 SATA2
80ppm
1,200 x 1,200dpi, 600 x 600dpi
PostScript3 CPSI3017 PDF1.7
TIFF PPML PPML/VDX VPS
PS: 207 fonts
IC-6014 (Embedded Controller)
Embedded
Core2 Duo 2.8GHz
4GB
250GB x 2 SATA
80ppm
1,200 x 1,200dpi, 600 x 600dpi
PostScript3 CPSI3019 PDF1.7
TIFF (2nd) PPML PCL5c/6 (2nd)
XPS (2nd)
TCP/IP, IPX/SPX, Net BEUI,
AppleTalk (EtherTalk), IPP, WSD
Windows 2000
Windows XP
Windows Server2003
Windows Vista
Windows 7
Windows Server2008
MacOSX 10.4 or later
PS: 136 fonts
PCL: 81 fonts
10/100/1000Base-T
412mm x 114mm x 402mm5
(16-1/4" x 4-1/2" x 16")
Printing speed may vary according to the paper weight. 2 Upgrade kit UK-102 (dongle) is necessary. 3 Upgrade kit UK-103 (dongle) is necessary.
Hard Disk Kit HD-514 and Preview Kit PH-101 are needed together. 5 Includes main body support bar and protrusion parts (screws).
For more information please visit
www.itecgroup.com
Product appearance, configuration and/or specifications are subject to change without notice.
PageScope, Simitri and S.E.A.D. are registered trademarks or trademarks of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Adobe and PostScript are registered trademarks or trademarks of Adobe Systems Incorporated.
All other brand and product names are registered trademarks or trademarks of their respective owners.
Ecology & Environment
KONICA MINOLTA products are designed with the
environment in mind.
• RoHS Compliance
• WEEE Compliance
Requirements for safe use
Ć Please read and follow the instruction manual to ensure safe operation.
Ć Only operate using appropriate power supply and voltage.
Ć Connecting the earth wire to an inappropriate place may cause explosion or electric shock.
http://www.itecgroup.com
• Eco-friendly Toners
• Production at ISO Certified Factories