ISE/pH Calibration Check™ pH Meters

HI 9126
Calibration Check™ pH Meters
With Large Display
A new standard in pH Portable
The HI 9126 is the next generation in professional,
accurate, easy-to-use pH meters. Designed to provide laboratory
results in a sleek, portable design. The HI 9126 features
HANNA ‘s exclusive Calibration Check™ technology.
Calibration Check™ monitors the pH bulb and reference junction
of the electrode every time the instrument is calibrated. In the
event of a dirty pH bulb, Calibration Check™ prompts the user
that additional cleaning may be needed.
The extended multi-level LCD displays pH and temperature (°C or
°F) readings simultaneously, while also displaying the electrode
status and operational guides. The HI 9126 helps users through
the calibration process with clear on-screen messages. The meter
features a series of diagnostic features to improve measurement
consistency and reliability.
Calibration is performed automatically at 1 or 2 points with 7
standard buffers and 2 custom buffers.
HI 9126 is supplied with rechargeable batteries and a inductive
docking station for easy recharging.
The meter is provided with the BEPS (Battery Error Prevention
System) which automatically turns the instrument off when the
battery level is too low to ensure reliable readings.
The HI 9126 can also be used for ORP measurements in the mV
range with 0.1 mV resolution.
• Exclusive Calibration Check™
• Electrode condition monitoring
• Backlit, multi-level LCD
• On-screen operational guide
• Extended pH and temperature ranges
• Up to 7 standard buffers for calibration
and 2 custom buffers
User-selectable calibration timeout reminder
Measures in °C or °F
Rechargeable batteries
Inductive battery recharger docking station included
BEPS (Battery Error Prevention System)
pH electrode, temperature probe and hard carrying
case included
Shown actual Size
With Great Products, Come Great Results™
HI 9126
Calibration Check™ pH Meters
With Large Display
When the batteries are low, you don’t have to worry about
carrying a spare set with you—the batteries can be recharged
with HANNA’s inductive recharger. Simply leave the meter
on the recharger for a few hours and you’re ready to go.
The recharger can be plugged into a standard 115V or
230V socket using the appropriate HANNA adapter.
Rechargeable Batteries with Inductive
Long Battery Life
HI 9126 has an extended battery life (up to 200
hours) to guarantee long operation in the field.
HI 9126
-2.00 to 16.00 pH
±699.9 mV; ±1999 mV
Accuracy (@20°C)
-20.0 to 120.0°C / -4.0°F to 248.0°F
0.01 pH
0.1 mV; 1 mV
0.1°C / 0.1 °F
±0.01 pH
±0.2 mV; ±1 mV
±0.4°C / ±0.8°F
Calibration Check
check of the electrode status during calibration
automatic, 1 or 2 point with 7 memorized buffer values
(pH 1.68, 4.01, 6.86, 7.01, 9.18, 10.01, 12.45) + 2 custom buffers
pH Calibration
Offset Calibration
±1 pH
Slope Calibration
From 80 to 108%
Temperature Compensation
automatic or manual, -20 to 120°C (-4 to 248°F) without temperature probe
HI 1230B, double junction, PEI body, gel filled,
BNC connector and 1 m (3.3’) cable (included)
pH Electrode
Temperature Probe
HI 7662 with 1 m (3.3’) cable (included)
Input Impedance
1012 Ohm
Battery Type / Life
(4) 1.2V AAA rechargeable / approx. 200 hours of continuous use (with
backlight off ); auto-off after 20 minutes of non-use (can be disabled)
0 to 50°C (32 to 122°F); RH max 100%
Dimensions / Weight
HI 7662
HI 9126-01 (115 V) and HI 9126-02 (230 V) is
supplied with HI 1230B combination doublejunction, gel-filled pH electrode, HI 7662 stainless
steel temperature probe with 1 m (3.3’’) cable, pH
4.01 & pH 7.01 buffer solutions (20 mL sachets), 100
mL plastic beaker, (4) 1.2 AAA rechargeable batteries
(inside the instrument), HI 710044 inductive
recharger* with power adapter, instruction manual
and rugged carrying case.
HI 1230B
HI 3230B
192 x 71.6 x 36 mm (7.5 x 2.8 x 1.4’’) / 525 g (15 oz.)
Temperature probe
HI 7004L
pH 4.01 buffer solution, 500 mL
HI 7007L
pH 7.01 buffer solution, 500 mL
HI 7010L
pH 10.01 buffer solution, 500 mL
HI 70004P
pH 4.01 buffer solution, 20 mL
sachets (25)
HI 70007P
pH 7.01 buffer solution, 20 mL
sachets (25)
HI 70010P
pH electrode, double junction,
PEI body, BNC connector,
1 m (3.3’) cable
pH 10.01 buffer solution, 20 mL
sachets (25)
HI 70300L
Electrode storage solution, 500 mL
ORP electrode, gel filled, PEI
body, with platinum sensor, BNC
connector, 1 m (3.3’) cable
HI 7061L
Electrode cleaning solution, 500 mL
HI 76405
Electrode holder
Download PDF