Cold Water Dispenser Features Codes / Standards

TAFT
ASTO
Features
Features
• Quarter-turn washerless ceramic disc valve cartridge
Cold
Water Dispenser
Widespread
Lavatory Fauc
• Solid brass construction
2940-5623920
• Solid
brass construction
• ADA compliant
traditional
cold lever handle
• Spout assembly with integral supply hoses
• Brass valve bodies
• 6-3/4” (17.1 cm) spout height at outlet
Quarter-turn
washerless
ceramic disc valve cartridges
• 4-3/4” (12.1 •cm)
spout reach
(c-c)
• For single hole configurations
• ADA compliant traditional cross handles
• 1 gallon (3.6 liters) per minute maximum flow rate*
• Spout assembly with integral supply hoses
*A Water Dispenser flow rate of approximately 1 gpm or less is
typical but will vary
depending
on installation
specifi c factors
• Pop-up
drain
with tailpiece
including in-line water pressure and water fi ltration system.
• 1-7/16" (3.7 cm) spout height at outlet
Codes /
Standards
• 5-5/8"
(14.3 cm) spout Compliance
reach (c-c)
Meets or exceeds the following at date of manufacture:
• For 8" (20.3 cm) centers - Maximum 20" (50.8 cm)
• ASME A112.18.1/CSA B125.1
• 1.5 gallons (5.7 liters) per minute maximum flow rate
• IAPMO/cUPC
• NSF 61
• ADA (Handle Only)
• Energy Policy
Act of
Meets
or1992
exceeds the following at date of manufacture:
• All applicable US Federal and State material regulations
• ASME A112.18.1/CSA B125.1
Codes / Standards Compliance
• IAPMO/cUPC
Colors / Finishes
•
•
•
•
10B:
15:
15S:
26:
• IPC Bronze
Oil Rubbed
Polished Nickel
• NSF 61
Satin Nickel - PVD
Polished
Chrome
• ADA
Colors / Finishes
•O
ther: Refer•to
the Newport
Brass
ICC/ANSI
A117.1
catalog for additional color/finish options.
•
•
•
•
• Energy Policy Act of 1992
• All applicable US Federal and State material regulations
Specified Model
Model
2940-5623
6-290
• EPA WaterSense®
Description
Cold Water Dispenser
Specified
Integrated Air Model
Gap Base**
Model
Description
10B: Oil Rubbed Bronze
15: Polished Nickel
15S: Satin Nickel
26: Polished Chrome
• Other: Refer to the Newport Brass catalog f
additional color/finish options.
Colors | Finishes
10B
15
15S
26
Other
N/A
Colors / Finishes
** The use of an air gap is required for dispenser faucets drawing from a reverse osmosis filtration system. The Integrated Air
Gap Base (6-028)
of a
separate
air gap within the design of the product as depicted. Failure to specify
920 affords the functionality
Widespread
Lavatory
Faucet
10B
15air gap).
15S
26
the Integrated Air Gap Base (6-028) will result in a product constructed using the standard base (no
internal
Other
Product Specification Add “Color / Finish” suffix to Model number, below.
The Cold Water Dispenser Faucet shall be made of solid brass construction. Faucet shall incorporate a spout assembly with integral
supply hoses and feature a quarter-turn washerless ceramic disc valve cartridge. Faucet shall incorporate an ADA compliant traditional
cold lever handle design. Cold Water Dispenser Faucet shall have a 1 gallon (3.6 liters) per minute maximum flow rate and accommodate
Add
"Color
/ Finish"
Model
below.
single hole configurations. Product shall incorporate a 6-3/4” (17.1 cm) spout
height
at outlet
and asuffix
4-3/4”to
(12.1
cm) number,
spout reach
(c-c).
Cold Water Dispenser
Faucet shall
be Newport
BrassFaucet
Model shall
2940-5623/____
. [Integrated
Air Gap Base
shall shall
be Newport
BrassaModel
The two-handle
Widespread
Lavatory
be made of solid
brass construction.
Faucet
incorporate
spout assembly w
6-028/____].
integral supply hoses and feature brass valve bodies with quarter-turn washerless ceramic disc valve cartridges. Faucet shall hav
1.5 gallon (5.7 liter) per minute maximum flow rate. Product shall be for 8" (20.3 cm) centers - Maximum 20" (50.8 cm). Product s
incorporate a 1-7/16" (3.7 cm) spout height at outlet and a 5-5/8" (14.3 cm) spout reach (c-c). Faucet shall include a pop-up drain w
tailpiece and incorporate ADA compliant traditional cross handles. Widespread Lavatory
Faucet shall
be Newport Brass Model 920/___
t: 949.417.5207
l www.newportbrass.com
©2017 Brasstech, Inc.
Page
1 of 2 Spec_2940-5623
Product Specification:
page 1 of 2
spec_ 920_rev-a
t: 949.417.5207 | www.newportbrass
2940-5623
PRODUCT DIMENSIONS (Units are in inches)
Taft Cold Water Dispenser
2940-5623
Page 2 of 2 Spec_2940-5623
t: 949.417.5207 l www.newportbrass.com
©2017 Brasstech, Inc.
Download PDF