Dishwashers
2
Glasswashers
Constructional features
Double-skin construction throughout, including the door. The sides of the wash chamber are partially of doubleskin construction. The welded tank is equipped with an integral filter made from composite material.
The deep-drawn rack guides have rounded edges. The wash chamber is free of internal pipes and sharp corners.
The Fast 50 differs from other models for its single-skin construction with fitted rack guides.
Technologies
Dual-flow wash pump, energy economiser, rapid tank heating and rinse control with Thermostop are all provided as
standard equipment. Depending on the version, two different systems are used for draining and changing the water: EDT
uses a pump to drain excess water from the bottom of the tank (where it is most dirty) prior to the start of rinsing; EDS
exploits the Archimedes principle, using clean water like a piston to force the dirty water through the overflow. With EDT,
100% of the rinse water is changed, while with EDS, 83% is changed.
User interface
Comprised of four function keys and a LED display which shows the wash and rinse temperatures. The user can adjust the
tank and boiler temperatures and the dispenser dosing rates.
Wash programmes
All versions offer a choice of two standard wash programmes to suit different levels of soiling, and one self-clean
programme.
Equipment
Peristaltic rinse aid dispenser on all versions. Peristaltic detergent dispenser available on request for all versions. Standard
equipment includes two glasses racks and a cutlery insert for FAST 30 and 40 and plate rack, universal rack and cutlery
insert for FAST 50.
3
30 40
Fast 30
Glasswashers, 59.5 cm high with 35x35 cm rack and 26 cm door opening.
The washing function is performed by the lower spray arm only. The low
height of the machine combined with the wide door opening make it the
ideal solution for smaller establishments which, however, need to wash tall
glasses.
Available versions: see tables on pages 6-7.
Fitting the grille in the wash chamber is a quick and simple operation: just
rest it on the supports provided.
Available versions: see tables on pages 6-7.
Fast 40
Glasswashers, 67 cm high with 39x39 cm rack and 32 cm door opening.
With the ample door opening and the dual-flow wash pump, the machine
also functions perfectly as a plate washer, making it extremely versatile. An
optional plate insert is available. For delicate glass goblets, special racks
are available with row dividers and an inclined base that can accommodate
goblets up to 11 cm in diameter. At peak times for serving coffee, the
washing of demitasse cups and saucers can be speeded up with the use
of an optional grille that allows two racks to be washed simultaneously:
demitasse cups in the lower rack, saucers in the top.
Fast 30
Fast 40
H cm
25
30
Ø cm
-
30
50
Glasswashers/dishwashers, 71 cm high with 45x45 cm rack and 30 cm
door opening.
An effective compromise between a medium-size glass washer and a small
plate washer can be the ideal solution for restaurants with a limited number
of covers.
Available versions: see tables on pages 6-7.
Fast 50
H cm
28
Ø cm
28
4
Dishwashers
Constructional features
Undercounter and front load: double-skin construction throughout, including the door. The sides of the wash
chamber are partially of double-skin construction. The tank has deep-drawn base and is equipped with an integral
filter made from composite material. The deep-drawn rack guides have rounded edges. The wash chamber is
free of internal pipes and sharp corners. Hood: double-skin construction, with single-skin hood. The moulded
tank is equipped with an integral filter made from composite material. The hood opens smoothly, with little effort
from the operator. The wash chamber is free of internal pipes and sharp corners.
Technologies
Dual-flow wash pump, energy economiser, rapid tank heating and rinse control with Thermostop are all provided as
standard equipment. Depending on the version, two different systems are used for draining and changing the water: EDT
uses a pump to drain excess water from the bottom of the tank (where it is most dirty) prior to the start of rinsing; EDS
exploits the Archimedes principle, using clean water like a piston to force the dirty water through the overflow. With EDT,
100% of the rinse water is changed, while with EDS, 83% is changed.
User interface
Comprised of four function keys and a LED display which shows the wash and rinse temperatures. The user can adjust the
tank and boiler temperatures and the dispenser dosing rates.
Wash programmes
All versions offer a choice of four standard wash programmes: three programmes for different levels of soiling and one
specific programme for washing glasses. All versions are also equipped with the self-clean programme as standard.
Equipment
Peristaltic rinse aid dispenser on all versions. Peristaltic detergent dispenser available on request for all versions. A plate
rack, a universal basket and a cutlery insert are all supplied as standard.
5
60M 60 70
Fast 60M - 60
Undercounter dishwashers, 82 cm high with 50x50 cm rack and 36.5 cm
door opening.
Optional stainless steel plinth with rack storage compartment.
Fast 60M is the single-phase power model. Available versions: see tables on
pages 6-7.
Fast 70
Front load dishwashers, 125 cm high with 50x50 cm rack and 38.5 cm door
opening.
The worktop height of 76 cm from the floor means that the operator can load
and unload the machine without having to bend down.
Thanks to the large capacity of the wash tank, the machine can wash
Gastronorm and Euronorm trays.
Available versions: see tables on pages 6-7.
Fast 60M - 60
Fast 70
H cm
32.5
35.5
Ø cm
36.5
39
H cm
-
GN1/1 (53x32)
80
Hood dishwashers with 50x50 cm rack and door opening of 45 cm.
The hood can be installed in line or as a corner unit without the need
for additional components. Our wide range of tables and accessories of
different types and dimensions allows you to personalise the washing zone
to suit your specific requirements.
Available versions: see tables on pages 6-7.
Fast 80
H cm
42.5
Ø cm
44
H cm
GN1/1 (53x32)
6
TECHNICAL DATA
Fast 30
Fast 40
Fast 50
30 (35 with hot water)
30 (35 with hot water)
30 (35 with hot water)
Effective productivity
racks/hour
Theoretical productivity
racks/hour
40
40
40
Dimensions ( WxDxH )
cm
40,1x49x59,5
43,6x53,5x67
52,5x55,5x71,5
Door opening
cm
26
32
30
Max. height of glasses
cm
25
30
28
Max. height of plates
cm
-
30
28
Maximum tray/pan dimensions
cm
-
-
-
Rack dimension
cm
35x35
39x39
45x45
Tank capacity
litres
7
8
14
Boiler capacity
litres
2,6
2,6
2,6
Tank heating element
kW
0,6
0,6
0,6
Boiler heating element
kW
2,6
2,6
2,6
Wash pump
kW
0,15
0,2
0,2
Rinse pump*
kW
-
-
-
Drain pump*
kW
0,04
0,04
0,04
Total power consumption
kW
3,5
3,5
3,5
230 V - 50Hz - 1N
230 V - 50Hz - 1N
230 V - 50Hz - 1N
Power supply
Max. current
amp
16
16
16
Min.-max water supply pressure
bar
2→4
2→4
2→4
Water supply temperature
°C
50 → 60
50 → 60
50 → 60
yes
yes
yes
Standard
yes
yes
yes
S - built-in water softener
yes
yes
-
D - peristaltic detergent dispenser
yes
yes
yes
-
-
yes
E - partial drain with pump
yes
yes
yes
DE - peristaltic detergent dispenser and partial drain with pump (EDT)
yes
yes
yes
-
-
-
Peristaltic rinse aid dispenser
* where present
AVAILABLE VERSIONS
SD - built-in water-softener and peristaltic detergent dispenser
CDE - atmospheric boiler with rinse pump, peristaltic detergent dispenser
and partial drain with pump (EDT)
Effective productivity
The maximum productivity that can actually be obtained in real-life operating conditions when several cycles are performed in succession, taking into account
the time required between cycles for the water to reach the correct temperature and to unload and load the rack.
(Parameters used: water supply temperature 15 °C and loading/unloading time of 12 seconds).
Theoretical productivity
Value that cannot be achieved in real-life conditions, obtained through mathematical calculation considering the shortest wash cycle (usually 60 seconds).
7
Fast 60M
Fast 60
Fast 70
Fast 80
20
32
39
45
60
60
60
60
57,5x60,5x82
57,5x60,5x82
60x60x125
63,4x74,4x152,9
36,5
36,5
38,5
45
32,5
32,5
35,5
42,5
36,5
36,5
39
44
-
-
GN1/1 (53x32)
GN1/1 (53x32)
50x50
50x50
50x50
50x50
20
20
15
15
6
6
6
6
2,1
1,4
1,4
2,1
3
4,9
6
7
0,47
0,47
0,47
0,47
0,2
0,2
0,2
0,2
0,04
0,04
0,04
0,04
3,5
6,8
7,9
9,6
230 V - 50Hz - 1N
400 V - 50Hz - 3N
400 V - 50Hz - 3N
400 V - 50Hz - 3N
16
16
16
16
2→4
2→4
2→4
2→4
50 → 60
15 → 60
15 → 60
15 → 60
yes
yes
yes
yes
yes
yes
-
yes
yes
yes
-
-
-
yes
yes
yes
-
yes
-
-
-
-
-
-
yes
yes
-
yes
-
-
-
yes
Important: The consumption and performance data indicated refer to machines installed and operating in ideal conditions and may vary according to installation conditions.
The technical data furnished in this catalogue are for guidance purposes only and may be modified in accordance with the continuous technological development of our products.
During more than forty years of business, we have produced more than a million
industrial dishwashers at our two Italian plants. These numbers reflect our unrivalled
experience in the sector. Building on this experience, we have continued to develop
competitively-priced innovative products for leading players in the catering industry,
providing effective, consistent benefits for their various enterprises. This is why we
at Elettrobar claim to be more than just a dishwasher manufacturer: we are benefit
makers.
Our company is fully aware of the increasing importance of environmental
protection issues and for many years has played its part, developing and patenting
innovative technologies able to reduce water, energy and detergent consumption
without impairing performance.
We adopt extremely stringent ISO 9001:2008 certified quality control procedures
to build products that can withstand even the harshest operating conditions. Our
dishwashers are manufactured at facilities that lead the way as regards workplace
safety and environmental impact, as confirmed by ISO 14001:2004 certification.
Eurotec Service
Our commitment to quality does not end when the machine leaves the factory, but
continues throughout the entire life-cycle of the product:
EurotecService is the specialised division that oversees both our replacement
parts service and our after-sales service, with particular emphasis on training and
qualification of our extensive network of dealerships and service centres that covers
the whole of Italy.
This division is also responsible for pre-sales, logistics and customer care activities,
thereby promoting an intrinsically synergistic approach to all activities that have a
direct bearing on customer satisfaction.
Eurotec s.r.l. - ELETTROBAR division
37045 San Pietro di Legnago (VERONA) ITALIA - Tel. 0442 634311 - Fax 0442 629132
e-mail: info_elettrobar@itweurotec.it - www.elettrobar.eurotecgroup.com
03-2017
FOOD EQUIPMENT GROUP