Fridge-freezer
CI..
en User manual
en
en Table of Contents
enI struction for Use
Safety and warning information ......................... 3
Information concerning disposal ....................... 4
Scope of delivery .................................................. 5
Installing the appliance ....................................... 5
Ambient temperature and ventilation ............... 5
Connecting the appliance ................................... 6
Getting to know your appliance ........................ 7
Switching the appliance on ............................. 10
Set the language ............................................... 10
Setting the temperature unit ............................ 10
Setting the temperature .................................... 10
Special functions ............................................... 11
Alarm function .................................................... 12
Usable capacity ................................................. 12
Refrigerator compartment ............................... 13
Super cooling ..................................................... 13
“Cool-fresh” container ...................................... 13
Freezer compartment ....................................... 13
Max. freezing capacity ...................................... 13
Freezing fresh food ........................................... 14
Super freezing .................................................... 14
Thawing frozen food ......................................... 14
Ice maker ............................................................ 15
Water filter ........................................................... 15
Specification and performance data sheet .. 16
Interior fittings .................................................... 17
Switching off and disconnecting
the appliance ..................................................... 18
Defrosting ........................................................... 18
Cleaning the appliance .................................... 18
Odours ................................................................. 19
Light (LED) .......................................................... 19
Tips for saving energy ...................................... 19
Operating noises ............................................... 19
Eliminating minor faults yourself ..................... 20
Customer service .............................................. 21
2
en
m Safety and warning
information
Before you switch ON the appliance
Please read the operating and installation
instructions carefully! They contain
important information on how to install, use
and maintain the appliance.
The manufacturer is not liable if you fail to
comply with the instructions and warnings.
Retain all documents for subsequent use or
for the next owner.
Technical safety
The appliance contains a small quantity of
environmentally friendly but flammable
refrigerant R600a. Ensure that the tubing of
the refrigerant circuit is not damaged during
transportation and installation. Leaking
refrigerant may cause eye injuries or ignite.
If damage has occurred
ʋ Keep naked flames and/or ignition
sources away from the appliance,
ʋ thoroughly ventilate the room for several
minutes,
ʋ switch off the appliance and pull out the
mains plug,
ʋ inform customer service.
The more refrigerant an appliance contains,
the larger the room must be in which the
appliance is situated. Leaking refrigerant
can form a flammable gas-air mixture in
rooms which are too small.
The room must be at least 1 m³ per 8 g
of refrigerant. The amount of refrigerant in
your appliance is indicated on the rating
plate inside the appliance.
If the power cord of this appliance is
damaged, it must be replaced by the
manufacturer, customer service or a
similarly qualified person. Improper
installations and repairs may put the user
at considerable risk.
Repairs may be performed by the
manufacturer, customer service or a
similarly qualified person only.
Only original parts supplied by the
manufacturer may be used. The
manufacturer guarantees that only these
parts satisfy the safety requirements.
A extension cable may be purchased from
customer service only.
The hose set must only be purchased from
and installed by customer service.
Important information when using the
appliance
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
Never use electrical appliances inside the
appliance (e.g. heater, electric ice maker,
etc.). Explosion hazard!
Never defrost or clean the appliance with
a steam cleaner! The steam may
penetrate electrical parts and cause
a short-circuit. Risk of electric shock!
Do not use pointed and sharp-edged
implements to remove frost or layers of
ice. You could damage the refrigerant
tubes. Leaking refrigerant may cause eye
injuries or ignite.
Do not store products which contain
flammable propellants (e.g. spray cans)
or explosive substances in the appliance.
Explosion hazard!
Do not stand on or lean heavily against
base of appliance, drawers or doors, etc
For cleaning pull out mains plug or switch
off fuse. Do not pull out the mains plug by
tugging on the power cord.
Store high-percentage alcohol tightly
closed and standing up.
Keep plastic parts and the door seal free
of oil and grease. Otherwise, parts and
door seal will become porous.
Never cover or block the ventilation
openings of the appliance!
Avoiding placing children and
vulnerable people at risk:
At risk are children, people who have
limited physical, mental or sensory
abilities, as well as people who have
inadequate knowledge concerning safe
operation of the appliance.
Ensure that children and vulnerable
people have understood the hazards.
A person responsible for safety must
supervise or instruct children and
vulnerable people who are using the
appliance.
Only children from 8 years and above
may use the appliance.
Supervise children who are cleaning and
maintaining the appliance.
Never allow children to play with the
appliance.
3
en
ʋ
ʋ
ʋ
Do not store bottled or canned drinks
(especially carbonated drinks) in the
freezer compartment. Bottles and cans
may burst!
Never put frozen food straight from the
freezer compartment into your mouth.
Risk of low-temperature burns!
Avoid prolonged touching of frozen food,
ice or the evaporator pipes, etc.
Risk of low-temperature burns!
Children in the household
ʋ
ʋ
ʋ
Keep children away from packaging and
its parts.
Danger of suffocation from folding
cartons and plastic film!
Do not allow children to play with the
appliance!
If the appliance features a lock:
keep the key out of the reach of children!
General regulations
The appliance is suitable
for refrigerating and freezing food,
ʋ for making ice.
This appliance is intended for use in
the home and the home environment.
The appliance is suppressed according to
EU Directive 2004/108/EC.
The refrigeration circuit has been checked
for leaks.
This product complies with the relevant
safety regulations for electrical appliances
(EN 60335-2-24).
This appliance is intended for use up to a
maximum height of 2000 metres above sea
level.
ʋ
4
Information concerning
disposal
Disposal of packaging
The packaging protects your appliance from damage
during transit. All utilised materials are environmentally
safe and recyclable. Please help us by disposing of the
packaging in an environmentally friendly manner.
Please ask your dealer or inquire at your local authority
about current means of disposal.
Disposal of your old appliance
Old appliances are not worthless rubbish! Valuable raw
materials can be reclaimed by recycling old appliances.
This appliance is labelled in
accordance with European
Directive 2012/19/EU concerning
used electrical and electronic
appliances (waste electrical and
electronic equipment - WEEE).
The guideline determines the
framework for the return and
recycling of used appliances as
applicable throughout the EU.
m Warning
Redundant appliances
1. Pull out the mains plug.
2. Cut off the power cord and discard with the mains
plug.
3. Do not take out the trays and receptacles: children
are therefore prevented from climbing in!
4. Do not allow children to play with the appliance once
it has spent its useful life. Danger of suffocation!
Refrigerators contain refrigerant and gases
in the insulation. Refrigerant and gases must be
disposed of professionally. Ensure that tubing
of the refrigerant circuit is not damaged prior to proper
disposal.
en
Scope of delivery
After unpacking all parts, check for any damage in
transit.
If you have any complaints, please contact the dealer
from whom you purchased the appliance or our
customer service.
The delivery consists of the following parts:
ʋ Built-in appliance
ʋ Interior fittings (depending on model)
ʋ Bag containing installation materials
ʋ Operating instructions
ʋ Installation manual
ʋ Customer service booklet
ʋ Warranty enclosure
ʋ Information on the energy consumption and noises
Installing the appliance
Have a technician install and connect the appliance
according to the enclosed installation instructions.
Transporting
The appliance is heavy. Secure in position during
transportation and installation.
Due to the weight/dimensions of the appliance and to
minimise the risk of injury and damage to the appliance
at least two persons are necessary to set-up the
appliance safely.
Ambient temperature
and ventilation
Ambient temperature
The climate class can be found on the rating plate.
The climate class indicates within which ambient
temperatures the appliance can be operated.
Climate class
SN
N
ST
T
Permitted ambient
temperature
+10 °C to 32 °C
+16 °C to 32 °C
+16 °C to 38 °C
+16 °C to 43 °C
Note
The appliance is fully functional within the room
temperature limits of the indicated climatic class. If
an appliance of climatic class SN is operated at colder
room temperatures, the appliance will not be damaged
up to a temperature of +5 °C.
Ventilation
Conduction of the heated air must not be obstructed.
Otherwise, the refrigeration unit must work harder. This
increases power consumption. Therefore: Never cover
or block the ventilation opening!
Installation location
A dry, well ventilated room is suitable as an installation
location. The installation location should not be
exposed to direct sunlight and not placed near a heat
source, e.g. a cooker, radiator, etc. If installation next
to a heat source is unavoidable, use a suitable
insulating plate or observe the following minimum
distances from the heat source:
3 cm to electric or gas cookers.
30 cm to an oil or coal-fired cooker.
The floor of the installation location must not give way;
if required, reinforce floor. To ensure that the ice maker
functions correctly, the appliance must be upright.
ʋ
ʋ
5
en
Connecting the appliance
Have a technician install and connect the appliance
according to the enclosed installation instructions.
Do not remove the transportation protection devices
from the shelves and storage compartments until
the appliance has been installed.
Always connect the water before the power.
Apart from statutory national regulations, you should
stick to the connection terms relating to the local
electricity and water companies.
After installing the appliance, wait at least 1 hour until
the appliance starts up. During transportation the oil
in the compressor may have flowed into
the refrigeration system.
Before switching on the appliance for the first time,
clean the interior of the appliance (see chapter
“Cleaning the appliance”).
Water connection
The water may be connected only by a competent fitter
according to the local regulations of the appropriate
water supply company.
m Caution
Risk of appliance being damaged by particles!
The water filter must always be connected to the tap –
even if an additional filter system is used.
m Caution
Use only the enclosed hose set or a hose set
purchased from customer service for connection to the
drinking water mains.
The hose set must only be installed by customer
service.
Do not use existing or already used hose sets.
Connect the appliance to a drinking water line only:
Minimum pressure: 0.2 Mpa (2 bar)
Maximum pressure: 0.8 Mpa (8 bar)
ʋ Pressure over 0.8 MPa (8 bar): install a pressure
limiter between drinking water connection and hose
set
A separate shut-off valve should be installed
in the cold-water inflow.
The shut-off valve should not be located behind
the appliance. It is recommended that you mount
the shut-off valve directly next to the appliance or at
another place which is easily accessible.
When installing the water connection, pay attention
to the permissible installation area for the water mains.
For connection to the drinking water mains use only
water pipes which are suitable for drinking water.
Observe national regulations and the connection
conditions of the local water supply companies.
ʋ
ʋ
Note
The maximum outside diameter of the water mains
(without connecting pieces) is 10 mm.
6
Electrical connection
The socket must be near the appliance and also freely
accessible following installation of the appliance.
The appliance complies with the protection class I.
Connect the appliance to 220-240 V/50 Hz alternating
current via a correctly installed socket with protective
conductor. The socket must be fused with a 10
to 16 A fuse.
For appliances operated in non-European countries,
check whether the stated voltage and current type on
the rating plate match the values of your mains supply.
These specifications can be found on the rating plate
(see chapter “Customer service”).
m Warning
Never connect the appliance to electronic energy saver
plugs.
Our appliances can be used with mains and sinecontrolled inverters. Mains-controlled inverters are used
for photovoltaic systems which are connected directly
to the national grid. Sine-controlled inverters must be
used for isolated applications (e.g. on ships or in
mountain lodges) which are not connected directly to
the national grid.
en
Getting to know your appliance
These operating instructions refer to several models. The diagrams may differ.
2 door model
A
B
Refrigerator compartment
Freezer compartment
1
2
3
4
5
6
7
8
9
10
Light switch
Controls
Glass shelf
Light (LED)
Fruit and vegetable container
“Cool-fresh” container
Ice maker
Ventilation
Water filter
Butter and cheese compartment
11
12
Door shelf
Storage compartments for large
bottles
Ice cube container
Container
Door drawer
13
14
15
7
en
3 door model
A
B
Refrigerator compartment
Freezer compartment
1
2
3
4
5
6
7
8
9
10
Light switch
Controls
Glass shelf
Light (LED)
Fruit and vegetable container
“Cool-fresh” container
Ice maker
Ventilation
Water filter
Butter and cheese compartment
11
12
Door shelf
Storage compartments for large
bottles
Ice cube container
Container
Door drawer
13
14
15
8
en
Controls
A
B
C
D
E
F
On/Off button
Serves to switch the whole
appliance on and off.
Ice maker button
Serves to switch the ice maker on
and off, see chapter Ice maker.
Alarm button
Used to switch off the warning
signal, (see chapter “Alarm
function”).
“Super” button (refrigerator
compartment)
Switches super cooling on and
off.
“Super” button (freezer
compartment)
Switches super freezing
on and off.
Display panel
The temperatures
in the refrigerator compartment
and in the freezer compartment
are shown in the display panel.
Activated special functions are
shown via “symbol”.
The menus and setting options
which are available are
represented on the display panel
in the setup mode, see chapter
“Special functions”.
G
H
I
J
Selection buttons
The temperature setting is
activated using the selection
buttons (see chapter Setting
the temperature).
For selecting a menu in the setup
mode (see chapter Special
functions).
Setting buttons
The temperature can be changed
using the setting buttons (see
chapter “Setting
the temperature”).
More settings can be selected
in the setup mode, (see chapter
“Special functions”).
“setup” button
This button starts and ends
the setup mode. If the setup
mode is ended using the setup
button, the changes which have
been made are stored.
Button Vacation
Is used to switch vacation mode
on and off, (see chapter Special
functions, section Vacation
mode).
Note
A sound can be heard every time a button is actuated if this function is activated in the sound menu during the setup
mode.
Symbols in the display field
Refrigerator compartment display
Freezer compartment display.
Ice maker is switched on, see chapter Ice
maker.
Signal to the water filter is displayed, see
chapter Water filter.
Super cooling or super freezing is active,
see chapter Super cooling and Super
freezing.
Holiday mode is activated, see chapter
Special functions.
For the setting options in the set up mode,
see chapter Special functions.
A warning message is displayed, see
chapter Alarm function.
9
en
Switching the appliance on
Setting the temperature unit
Switch on the appliance with the On/Off button.
The appliance begins to cool. Light is switched on
when the door is open.
The temperature can be displayed in degrees Celsius
(°C) or degrees Fahrenheit (°F).
The factory has recommended the following
temperatures:
ʋ Refrigerator compartment: +4 °C
ʋ Freezer compartment: –18 °C
Operating tips
The appliance features a rail which is fitted to the left
door.
The door of the refrigerator compartment can be
opened without having to first open the right door.
A heating element is integrated into the bar in order
to avoid condensation. This can be switched on and off
(see chapter “Special functions”, section “Door rail
heater”).
m Caution
To prevent damage to the appliance or the furniture
fronts, fold the rail when closing the door.
1. Press setup button.
The first menu (temperature unit) is displayed.
2. Press the # or $ setting button in order to switch
between degrees Fahrenheit (°F) and degrees
Celsius (°C).
3. Press the setup button, in order to store the settings.
The set temperature is displayed again in the fascia.
Setting the temperature
Refrigerator compartment
(can be selected from +2 °C to +8 °C)
We recommend a setting of +4 °C.
Perishable food should not be stored above +4 °C.
1. Activate the setup mode with the selection button ˜.
The symbol Ô is displayed.
2. Set the temperature with the # (warmer) or $
(cooler) selection buttons.
Freezer compartment
(can be selected from -16 °C to -24 °C)
We recommend a setting of -18 °C.
1. Activate the setup mode with the selection button Ù.
2. Set the desired temperature with the # (warmer)
or $ (cooler) setting buttons.
Set the language
The display languages can be changed according
to the table in the chapter “Special functions”, “Setup
mode”.
In order to change the display language:
1. Press setup button.
2. Press the Ù or ˜ setting button, until the set
language is displayed.
3. Press the # or $ setting button, until the desired
language is displayed.
4. Press the setup button, in order to store the settings.
The set temperature is displayed again in the fascia.
10
en
Special functions
The following special functions can be selected
or displayed:
Setup mode
Menus in the setup mode
The following settings can be made.
Menu
Possible setting
Temperature unit
°C (degrees Celsius)
°F (degrees Fahrenheit)
Language
Deutsch
English
French
Danish
Finnish
Greek
Dutch
Italian
Polish
Portuguese
Norwegian
Russian
Swedish
Spanish
Turkish
Czech
Sound
On
Off
Energy saving mode (eco
function)
On
Off
Door rail heater (DRY DOOR)
On
Off
In Setup mode you can make your personal settings.
Switching on
Press setup button.
The first menu (temperature unit) is displayed in
the fascia.
Making settings
1. Switch on setup mode.
2. Press the selection button Ù or ˜.
The next menu is displayed and its current setting
(mostly ON or OFF).
3. Press the setting button # or $.
The setting is saved, if the next menu is selected
using Ù or ˜.
Vacation mode
If leaving the appliance for a long period of time, you
can switch the appliance over to the energy-saving
vacation mode.
When Vacation mode is switched on, the following
settings are made:
ʋ
ʋ
ʋ
Switching off
Press setup button.
All of the changed settings are stored.
Note
If no button is selected within 20 seconds, the setup
mode ends automatically. All of the changed settings
are stored. The set temperature is displayed again in
the fascia.
The appliance works in energy saving mode.
The illumination is switched off.
Super cooling or super freezing is then ended
(if activated).
Switching on
Press Vacation button.
VACATION is displayed in the display panel.
Switching off
Press Vacation button.
The previous settings and temperature values are once
again activated.
11
en
Rest mode
When Rest mode is switched on, the following settings
are switched off:
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
Ice maker
Acoustic signal
Interior light
Messages on the display panel
The background illumination of the display panel is
reduced
Buttons are locked
3. Press the setting button #, in order to reset
the setting.
4. Press the setup button, in order to save the setting.
Switching off
1. Press setup button.
2. Press the selection button ˜, until DRY DOOR
and the current setting (ON) is displayed.
3. Press the setting button $, in order to reset
the setting.
4. Press the setup button, in order to save the setting.
Switching on
1. Press and hold down the “super” button refrigerator
compartment.
2. Press Vacation button.
3. Press “super” button and hold down for 3 seconds
longer.
The symbol VACATION flashes on the display panel
and RESTMODE is displayed.
Alarm function
Switching off
Press Vacation button.
The previous settings and temperature values are once
again activated.
Temperature alarm
Energy saving mode
If the energy saving function (eco function) is activated,
the appliance switches to energy saving operation. This
energy saving function is preset at the factory in order
to reduce energy consumption. The background
illumination of the fascia is likewise reduced.
Switching on
1. Press setup button.
2. Press the selection button ˜, until ECO MODE
and the current setting (OFF) is displayed.
3. Press the setting button #, in order to reset
the setting.
4. Press the setup button, in order to store the setting.
ECO is displayed in the fascia.
Switching off
1. Press setup button.
2. Press the selection button ˜, until ECO MODE
and the current setting (ON) is displayed.
3. Press the setting button $, in order to reset
the setting.
4. Press the setup button, in order to store the setting.
Door rail heater
(for 3-door models only)
To prevent condensation, the door rail heater can be
switched on and off as required.
Switching on
1. Press setup button.
2. Press the selection button ˜, until DRY DOOR
and the current setting (OFF) is displayed.
12
Door alarm
The door alarm switches on if an appliance door is left
open for longer than three minutes. Close the door
to switch off the warning signal.
The temperature alarm switches on if the freezer
compartment is too warm and the frozen food is at risk
of thawing.
The set temperature of the freezer compartment flashes
and “Alarm” is displayed on the display panel.
When the alarm button is pressed, the temperature
display for the freezer compartment indicates for five
seconds the warmest temperature reached
in the freezer compartment.
Then this value is deleted. The temperature display for
the freezer compartment indicates the set freezer
compartment temperature without flashing.
Henceforth the “warmest temperature” will be redefined
and saved.
The alarm display goes out as soon as the set
temperature has been reached again.
The alarm may switch on without any risk
to the frozen food:
ʋ when the appliance is switched on,
ʋ when large quantities of fresh food are placed
in the appliance,
ʋ if the freezer compartment door is open too long.
Switching off the alarm
Press the alarm button to switch off the warning signal.
Usable capacity
Information on the usable capacity can be found inside
your appliance on the rating plate (see diagram at
chapter “Customer service”).
en
Refrigerator compartment
The refrigerator compartment is the ideal storage
location for ready meals, cakes and pastries, preserved
food, condensed milk, hard cheese, fruit
and vegetables sensitive to cold as well as tropical fruit.
When purchasing food, please note:
The “purchase freshness” is important for the shelf-life
of your food.
In principle, the following applies: the fresher you store
the food in the appliance, the longer it will remain fresh.
Therefore, when buying food, pay attention
to the degree of freshness.
In the case of ready-made products and bottled goods,
observe the best-before date or use-by date specified
by the manufacturer.
Switching off
Press super button refrigerator compartment.
“Cool-fresh” container
The “cool-fresh” container has a temperature of almost
0 °C. Ideal for storing fish, meat, sausage, cheese
and milk.
The temperature in the “cool-fresh” container can be
reduced slightly with the slide control.
We recommend the following controller position:
ʋ
ʋ
COLD: Meat, sausage and poultry
COLDER: Fish
Arranging food in the appliance
ʋ
ʋ
ʋ
ʋ
Wrap or cover food before placing in the appliance.
This will retain the aroma, colour and freshness of
the food. In addition, flavours will not be transferred
between foods and the plastic parts will not become
discoloured.
Allow warm food and drinks to cool down before
placing in the appliance.
Do not block air outlet openings with food in
the refrigerator compartment, otherwise the air
circulation will be impaired.
Food which is stored directly in front of the air outlet
openings may be frozen by the cold air flowing out.
Avoid contact of oil and fat with the plastic parts
and door seal.
Super cooling
Super cooling sets the refrigerator temperature
to the coldest temperature setting for approx. 6 hours.
Then the appliance automatically switches
to the temperature set prior to super cooling mode.
Switch on fast cooling mode, e.g.:
ʋ
ʋ
Before placing large quantities of food
in the refrigerator compartment
For fast cooling drinks
Freezer compartment
Use the freezer compartment:
ʋ
ʋ
ʋ
Note
Ensure that the freezer compartment door is always
closed properly. If the door is open, the frozen food will
thaw. The freezer compartment will become covered
in thick ice.
Also: Energy will be lost due to high power
consumption.
Purchasing frozen food
ʋ
ʋ
ʋ
ʋ
Switching on
Press super button refrigerator compartment.
The display panel indicates the symbol SUPERÙ and
the compartment for which the function was switched
on.
To store deep-frozen food.
To freeze food.
To make ice cubes.
Packaging must not be damaged.
Use by the “use by” date.
Temperature in the supermarket freezer must be
-18 °C or lower.
If possible, transport deep-frozen food in an
insulated bag and place quickly in the freezer
compartment.
Max. freezing capacity
Information about the max. freezing capacity within
24 hours can be found on the rating plate (see diagram
at chapter “Customer service”).
13
en
Freezing fresh food
Super freezing
Freeze fresh and undamaged food only.
To retain the best possible nutritional value, flavour and
colour, vegetables should be blanched before freezing.
Aubergines, peppers, zucchini and asparagus do not
require blanching.
Literature on freezing and blanching can be found
in bookshops.
Food should be frozen solid as quickly as possible in
order to retain vitamins, nutritional value, appearance
and flavour.
To prevent an undesirable temperature rise when
placing fresh food in the freezer compartment, switch
on super freezing several hours beforehand. As a rule,
4–6 hours is adequate. 24 hours are necessary when
using the maximum freezer capacity fully.
After 2 days the temperature set before super freezing
is automatically restored.
Note
Keep food which is to be frozen away from food which
is already frozen.
ʋ
ʋ
The following foods are suitable for freezing:
Cakes and pastries, fish and seafood, meat, game,
poultry, vegetables, fruit, herbs, eggs without shells,
dairy products such as cheese, butter and quark,
ready meals and leftovers such as soups, stews,
cooked meat and fish, potato dishes, soufflés and
desserts.
The following foods are not suitable for freezing:
Types of vegetables, which are usually consumed
raw, such as lettuce or radishes, eggs in shells,
grapes, whole apples, pears and peaches, hardboiled eggs, yoghurt, soured milk, sour cream,
crème fraîche and mayonnaise.
Packing frozen food
To prevent food from losing its flavour or drying out,
place in airtight containers.
1. Place food in packaging.
2. Remove air.
3. Seal the wrapping.
4. Label packaging with contents and date of freezing.
Suitable packaging:
Plastic film, tubular film made of polyethylene,
aluminium foil, freezer containers.
These products are available from specialist outlets.
Unsuitable packaging:
Wrapping paper, greaseproof paper, cellophane, bin
liners and used shopping bags.
Items suitable for sealing packaged food:
Rubber bands, plastic clips, string, cold-resistant
adhesive tape, etc.
Bags and tubular film made of polyethylene
can be sealed with a film heat sealer.
Shelf life of frozen food
Storage duration depends on the type of food.
At a temperature of -18 °C:
ʋ Fish, sausage, ready meals and cakes and pastries:
up to 6 months
ʋ Cheese, poultry and meat:
up to 8 months
ʋ Vegetables and fruit:
up to 12 months
14
Switching on
Press super freezing button.
The display panel indicates the symbol SUPERÙ and
the compartment for which the function was switched
on.
Switching off
Press super freezing button.
Thawing frozen food
Depending on the type and application, select one
of the following options:
ʋ
ʋ
ʋ
ʋ
at room temperature
in the refrigerator
in an electric oven, with/without fan assisted hot-air
in the microwave
m Caution
Do not refreeze thawing or thawed food. Only ready
meals (boiled or fried) may be refrozen.
No longer store the frozen produce for the max.
storage period.
en
Ice maker
The ice maker makes ice cubes.
The ice maker starts to make ice cubes as soon as
the appliance has reached the set temperature. If
the ice cube container is full, the ice maker
automatically switches off.
m Caution
Do not place bottles or food in the cube container
in order to cool them quickly. The ice maker may block
and be damaged.
Switching on
Note
If the ice maker is used for the first time and/or a long
period of not being used, do not use the ice which is
produced in the first day for hygiene reasons. Throw
the ice cubes away and clean the container!
1. Make sure that ice maker container is in its place
and locked into position.
2. Press ice maker button .
The symbol ICE is lit on the display panel.
Switching off
Note
Before switching off the ice maker, it is most important
that you switch the water supply to the appliance off for
a few hours.
ʋ
ʋ
ʋ
If the appliance or the ice has not been used actively
for several weeks or months or if the ice cubes have
an unpleasant taste or odor, change the water filter.
Air trapped in the system may cause water
to escape and the filter cartridge to be ejected.
Caution when removing.
The filter must be changed at least every 6 months.
Note
After use, the water system is subject to low pressure.
Be careful when removing the filter!
Exchanging the filter cartridge
1. Turn the filter cap on the base of the appliance by
90-180° anti-clockwise.
2. Pull out the filter cartridge.
3. Take a new filter cartridge from the packet
and remove the protective cap.
4. Take the filter cap off of the used filter cartridge.
5. Place the filter cap on the fresh filter cartridge.
6. With the filter cap in a horizontal position, feed
the filter cartridge into the opening on the appliance
base as far as it will go.
7. Turn the filter cartridge 90-180° in a clockwise
direction.
Press ice maker button.
Water filter
m Warning
Do not use the appliance in places where the water
quality is risky or not sufficiently known about without
suitable disinfection, before and after filtering.
8. Pour water out of the used filter cartridge. The filter
cartridge can be disposed of in the household
rubbish.
A filter cartridge for filtering particles can be obtained
from customer service or a specialist dealer.
m Caution
ʋ
ʋ
After installing a new filter, always discard the ice
produced within the first 24 hours after switching on
the ice maker.
If the ice has not been used for a prolonged period,
pour all ice cubes out of the container and also
discard the ice produced within the next 24 hours.
15
en
The concentration of the indicated substances which
are dissolved in water and penetrate the system was
reduced to a value below or equal to the permitted limit
value in accordance with ANSI/NSF 42 and 53
for water discharged out of the appliance.
Specification and performance
data sheet
Note
Even though the tests were conducted under standard
laboratory conditions, the actual performance may
deviate from these tests.
For filter model: 9000 077 095
Using replacement cartridge: 9000 077 104
The model was tested by NSF International with
reference to ANSI/NSF Standards 42 & 53
and certified for a reduction in the substances cited
below.
The system was tested and certified on model
9000 077 095 by NSF International with reference
to ANSI/NSF Standard 53 for a reduction in cysts
and turbidity, as well as with reference to ANSI/NSF
Standard 42 for a reduction in the taste and odour
of chlorine.
Nominal particle class: I
Nominal service life: 2.800 litres
Substance
Average
in inflow
Inflow
concentration
Waste water
concentration
Average
reduction as %
Cysts *
166.500
Min. 50.000/l
1
Turbidity
10.7
11 x 1 NTU
0.3 l
Particle
5.700.000
class I
Particle
size > 0.5
to < 1.0 —m
Taste
1.9
of chlorine
and
turbidity
Max. waste Min. reduction
water
as %
NSF test
99.99
Max. permitted
concentration
in waste water
99.95
1
99.99
97.10
0.5 NTU
0.49
95.42
51107703
51107803
At least 10.000 30.583
particles/ml
99.52
> 85%
69.000
98.9
51107903
2.0 mg/l + -10% 0.05
97.3
> 50%
0.06
96.84
51108103
* Based on the use of Cryptosporium parvum ocysts.
Application guidelines / Water supply parameters:
Water pressure
Water temperature *
Flow rate
207 - 827 kPa
0.6 °C - 38 °C
2.83 l/min.
The system is to be installed and operated
according to the guidelines recommended by
the manufacturer.
ʋ The filter is to be changed every 6-9 months.
ʋ Rinse new filter thoroughly for 5 minutes.
ʋ More detailed information can be found on
the warranty card.
Without appropriate disinfection before and after
connecting it to the system, this product should NOT
be used if the water is microbiologically
contaminated or if the quality has not been
ascertained. A system certified for cyst reduction
should be used for disinfected water which possibly
contains filterable cysts.
ʋ
16
A one-year warranty is issued for the entire system
(except disposable cartridge). With reference
to disposable cartridges a warranty is issued for
material and processing faults only. As the service life
of disposable cartridges depends on the local water
conditions, no warranty is issued for them.
More detailed information on the prices of spare parts
is available from your appliance dealer or parts
salesman on site.
Manufactured by:
Cuno Engineered Products
1000 Apollo Road
Eagan, MN 55121-2240 U.S.A.
en
Interior fittings
Taking out the shelves
You can reposition the shelves inside the appliance
and the door shelves as required.
Lift the shelves and remove.
Shelves inside the compartment
Containers in the freezer compartment
The containers in the freezer compartment can be
taken out for cleaning.
The upper container must first be removed before
the door container can be taken out.
1. Screw the closures by 90° on the pullout using
a screwdriver.
Door shelves
2. Lift container slightly and take out.
Containers in the refrigerator
compartment
1. Lift container slightly and take out.
3. Lift container at front slightly and insert into the
pullouts.
4. Lower container and push back.
5. Screw the closures by 90° on the pullout using
a screwdriver.
2. Lift container at front slightly and insert into the
pullouts.
3. Lower container and push back.
17
en
Switching off and
disconnecting the appliance
Cleaning the appliance
Switching the appliance off
Never clean the appliance with a steam cleaner!
Press the On/Off button.
Pull out the mains plug.
Disconnecting the appliance
If you do not use the appliance for a prolonged period:
1. Before switching off, it is most important that you
switch the water supply to the appliance off for a few
hours.
2. Take all food out of the appliance.
3. Switch the appliance off.
4. Pull out mains plug or switch off fuse.
5. Empty and clean the ice cube container (see chapter
Cleaning the appliance).
6. Clean the appliance interior (see chapter Cleaning
the appliance).
7. Leave the appliance doors open to prevent odours
from forming.
Defrosting
Defrosting is actuated automatically.
m Warning
m Caution
ʋ
ʋ
ʋ
Do not use abrasive, chloride or acidic cleaning
agents or solvents.
Do not use scouring or abrasive sponges. The
metallic surfaces could corrode.
Never clean shelves and containers in
the dishwasher. The parts may become deformed!
Proceed as follows:
1. Before cleaning: Switch off the appliance.
2. Pull out mains plug or switch off fuse.
3. Take out the frozen food and store in a cool location.
Place the ice pack (if enclosed) on the food.
4. Wait until the layer of frost has thawed.
5. Clean the appliance with a soft cloth, lukewarm water
and a little pH neutral washing-up liquid. The rinsing
water must not run into the light.
6. Wipe the door seal with clear water only and then
wipe dry thoroughly.
7. After cleaning reconnect and switch the appliance
back on.
8. Put the frozen food back into the appliance.
Interior fittings
All variable parts of the appliance can be taken out
for cleaning (see chapter Interior fittings).
Cleaning the ice cube container
If ice cubes have not been dispensed for a prolonged
period, they will shrink, have a stale taste and stick
together. Therefore, the ice cube container should be
cleaned regularly.
m Caution
A full ice cube container is heavy.
1. Remove the ice cube container.
2. Pull out the container, empty and clean with
lukewarm water.
3. Thoroughly dry the container to prevent new ice
cubes from sticking.
4. Insert the ice cube container.
Ice cube production continues.
18
en
Odours
Light (LED)
If you experience unpleasant odours:
Your appliance features a maintenance-free LED light.
These lights may be repaired by customer service
or authorised technicians only.
1. Switch the appliance off.
2. Take all food out of the appliance.
3. Clean interior (see chapter “Cleaning
the appliance”).
4. Clean all packages.
5. Seal strong smelling food in order to avoid odours
from forming.
6. Switch the appliance on again.
7. Store food in the appliance.
8. Check whether the formation of odours is still
occuring after 24 hours.
9. Change odour filter (see chapter “Exchange
the odour filter”).
Exchange the odour filter
Tips for saving energy
ʋ
ʋ
ʋ
ʋ
Spare filters are available from your dealer.
1. Open the filter holder.
ʋ
ʋ
ʋ
Install the appliance in a dry, well ventilated room!
The appliance should not be installed in direct
sunlight or near a heat source (e.g. radiator, cooker).
If required, use an insulating plate.
Do not block the ventilation openings in
the appliance.
Allow warm food and drinks to cool down before
placing in the appliance.
Thaw frozen food in the refrigerator compartment
and use the low temperature of the frozen food
to cool refrigerated food.
Open the appliance as briefly as possible.
Ensure that the freezer compartment door is always
closed properly.
The arrangement of the fittings does not affect the
energy rating of the appliance.
Operating noises
Quite normal noises
2. Remove the used odour filter and replace with a new
odour filter.
Droning
Motors are running (e.g. refrigerating units, fan).
Bubbling, humming or gurgling noises
Refrigerant is flowing through the tubing or water is
flowing into the ice maker.
Clicking
Motor, switches or solenoid valves are switching on/off.
Rumbling
Ready ice cubes from the ice maker are falling
into the ice cube container.
Preventing noises
3. Close the filter holder.
The appliance is not level
Please align the appliance with a spirit level. Use
the height-adjustable feet or place packing underneath
them.
The appliance is not free-standing
Please move the appliance away from adjacent units
or appliances.
Containers or storage areas wobble or stick
Please check the removable parts and re-insert them
correctly if required.
Bottles or receptacles are touching each other
Move the bottles or receptacles slightly away
from each other.
19
en
Eliminating minor faults yourself
Before you call customer service:
Please check whether you can eliminate the fault yourself based on the following information.
Customer service will charge you for advice – even if the appliance is still under guarantee!
Appliance
Fault
Possible cause
Appliance has no refrigeration capacity. Appliance has been switched off.
The light does not work.
Power failure.
The display does not illuminate.
The fuse has been switched off.
Remedial action
Press the On/Off button.
Check whether the power is on.
Check the fuse.
The mains plug has not been inserted properly.
Check whether the mains plug is secure.
Appliance opened frequently.
Do not open the appliance unnecessarily.
The ventilation openings have been covered.
Remove obstacles.
Large quantities of fresh food are placed
in the freezer.
Activate “super” cooling and/or “super” freezing.
The LED lamp is defective.
Call customer service.
Light switch is jammed.
Check whether it can be moved.
Display indicates “E..”.
Electronics have detected a fault.
Call customer service.
Display indicates “LOWPOWER”.
The mains voltage falls below the permitted
limiting value.
When the mains voltage reaches the stipulated value
again, the warning message goes out. If the warning
message lasts for longer, inform the energy supply
company.
Display indicates “HIGHVOLT”.
The mains voltage exceeds the permitted
limiting value.
When the mains voltage reaches the stipulated value
again, the warning message goes out. If the warning
message lasts for longer, inform the energy supply
company.
Condensation forms on the rail on
the left door.
Condensation of warm air.
Switch on heater in the rail (see chapter “Special
functions”, section “Door rail heater”).
Fault
Possible cause
Remedial action
The ice maker doesn’t work.
Ice maker is not connected to the mains supply. Call customer service.
The refrigeration unit is switching on
more frequently and for longer.
The light (LED) does not work.
Ice maker
The ice maker does not make enough
ice or the ice is deformed.
Ice maker does not contain any fresh water.
Ensure that the water is properly connected.
The freezer compartment temperature is too
warm.
Check freezer compartment temperature and, if
required, set slightly colder.
The appliance or ice maker has only just been
switched on.
Approx. 24 hours is needed until ice production starts.
A lot of ice has been taken.
Approx. 24 hours is needed until the ice cube container
is filled again.
Low water pressure.
Connect the appliance to the stipulated water pressure
only (see chapter “Connecting the appliance”, section
“Water connection”).
The water filter is bunged up or used.
Change the water filter.
Temperature in the freezer compartment is too
warm.
Set temperature slightly colder in the freezer
compartment.
Ice cubes have accumulated on the rear panel of Distribute ice cubes in the ice cube container. If ice
the ice cube container.
cubes are stuck to each other, loosen with a blunt
implement.
20
en
The ice maker does not make any ice.
Ice forms in the inflow hose to the ice
maker.
Water runs from the appliance.
The ice maker is switched off.
Switch the ice maker on at the control panel.
The appliance is not supplied with water.
Contact the installer or the water supply company.
Water supply has kinks.
Turn off the water supply at the shut-off tap. Smoothen
out the kinks, exchange where necessary.
Low water pressure.
Connect the appliance to the stipulated water pressure
only (see chapter Connecting appliance, section Water
connection).
Temperature in the freezer space is too warm.
Set temperature slightly colder in the freezer
compartment.
Ice cube container is not properly inserted.
Check the position, re-insert where necessary.
Incorrect shut-off tap installed.
Incorrect taps can cause low water pressure
and damage to the appliance.
Low water pressure.
Connect the appliance to the stipulated water pressure
only (see chapter Connecting the appliance, section
Water connection).
Shut-off valve incorrectly opened.
Open shut-off valve fully.
The water connection hose is not properly
sealed.
Replace the hose with a manufacturer’s original part.
Incorrect shut-off tap installed.
Incorrect taps can cause low water pressure
and damage to the appliance.
Customer service
Your local customer service can be found
in the telephone directory or in the customer-service
index. Please provide customer service
with the appliance product number (E-Nr.)
and production number (FD).
These specifications can be found on the rating plate.
To prevent unnecessary call-outs, please assist
customer service by quoting the product
and production numbers. This will save you additional
costs.
Repair order and advice on faults
Contact information for all countries can be found
on the enclosed customer service list.
GB
0344 892 8999
IE
01450 2655
US
866 447 4363
Calls charged at
local or mobile
rate.
0.03 € per minute
at peak. Off peak
0.0088 € per
minute.
toll-free
21
BSH Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München, GERMANY
siemens-home.com
.BOVGBDUVSFECZ#4))BVTHFS¤UF(NC)VOEFS5SBEFNBSL-JDFOTFPG4JFNFOT"(
*9000823584*
9000823584 (9510)
en