Dear Customer,
Thank you for choosing this quality product from ASKO.
We hope it will meet your expectations and fulfil your needs for many years to come.
Scandinavian design combines clean lines, everyday functionality and high quality. These
are key characteristics of all our products and the reason they are greatly appreciated
throughout the world.
To get the most from your new dishwasher, we recommend that you read the
operating instructions before using the dishwasher. The operating instructions also
include information on how you can help protect the environment.
Operating Instructions
Dishwasher
ASKO D5532 FI
CONTENTS
FRONT PANEL
SAFETY INSTRUCTIONS
BEFORE WASHING FOR THE FIRST TIME
LOADING THE DISHWASHER
USING THE DISHWASHER
SETTINGS
CARE AND CLEANING
2
3
4
4
6
9
11
TROUBLESHOOTING
TECHNICAL INFORMATION
INSTALLATION
SERVICE
PROGRAM CHART
YOUR NOTES
FRONT PANEL
The panel is fitted with touch buttons with audible feedback (see the chapter Settings).
1
2
3
4
5 6
7
8
9
10
1
On/Left-on mode
5
Rinse aid indicator
9
Delayed start
2
Program selector
6
Child lock (button lock)
10 Start/Stop
3
Program symbol
7
High temperature
4
Display
8
Long dry
NOTE!
• Two minutes after the last button press, the panel backlight enters energy saving mode. Close and reopen the door, or press the
On/Left-on mode button, to reactivate the panel.
2
13
16
18
19
20
21
SAFETY INSTRUCTIONS
GENERAL
• Read the operating instructions and keep them in a safe place!
• Never use the dishwasher for any purpose other than that
specified in these operating instructions.
• Do not load the dishwasher door or dishwasher baskets with
anything other than dishes.
• Never leave the dishwasher door open as someone may trip
on it.
• Use only dishwasher detergent!
• Place knives and other sharp items so that they cannot harm
anyone or damage the dishwasher.
• The machine is not designed to be used by persons (even
children) that are physically or mentally handicapped or lack
experience and knowledge. Such persons must receive
instruction in how to use the machine from the person
responsible for their safety.
• Damaged mains cables must only be replaced by a qualified
electrician.
• This dishwasher is for household or similar use, such as:
WARNING!
Dishwasher detergents are strongly alkaline. They can be
extremely dangerous if swallowed. Avoid contact with skin and
eyes and keep children away from the dishwasher when the
door is open.
Check that the detergent compartment is empty after
completion of the wash cycle.
Activate child lock (Kid Safe™)
You can activate the child lock (button lock) to prevent children
from starting the dishwasher (see the section Settings).
WINTER STORAGE/TRANSPORT
• Store the dishwasher where the temperature remains above
freezing.
• Avoid long transport distances in very cold weather.
• Transport the dishwasher upright or laying on its back.
OVERFLOW GUARD FUNCTION
- staff kitchens in shops, offices and other workplaces.
- farms.
- for guests at hotels, motels and other types of
accommodation.
- bed & breakfast hotels.
• Never place dishes with solvent residues in the dishwasher due
to the risk of explosion. Nor may dishes that contain ash, wax
or lubricants be washed in the dishwasher.
• Young children should be supervised to ensure that they do
not play with the appliance.
• The appliance is not intended for use by young children or
infirm persons without supervision.
The overflow protection starts pumping out the machine and turns
off the water supply if the water level in the dishwasher exceeds
the normal level. If the overflow protection is triggered, turn off
the water supply and call the service division.
INSTALLATION
• When the dishwasher has reached the end of its service life
and is to be disposed of, it should immediately be made
unusable. Pull out the power cable and cut it as short as possible.
• The dishwasher is manufactured and labelled for recycling.
• Contact your local authority for information about where and
how your dishwasher should be correctly recycled.
See the section Installation.
CHILD SAFETY
• Use the knife stand for all long/sharp items.
• Always close the door and start the program immediately after
you have added the detergent.
• Keep children away from the dishwasher when the door is
open. Some detergent may remain inside!
• Do not allow children to use or play with the dishwasher. Be
especially vigilant when the door is open.
CLEANING
When cleaning the edge around the door, use only a slightly damp
cloth. Do not spray water around the edge! Moisture can make
its way into the lock, which contains electrical components.
PACKING MATERIAL
Sort waste materials in accordance with local guidelines.
DISPOSAL
WARNING!
Children must be supervised – dishwasher detergent is corrosive!
Store detergent and rinse aid out of the reach of children! If
anyone swallows dishwasher detergent, they should immediately
drink one or two glasses of milk or water. Do not attempt to
induce vomiting. Contact a doctor! If anyone gets dishwasher
detergent in their eyes, rinse (for at least 15 minutes) with plenty
of water.
3
BEFORE WASHING FOR THE FIRST
TIME
LOADING THE DISHWASHER
CHECKING WATER HARDNESS
ECONOMIC DISHWASHING
Contact the local water utility to check the water hardness in your
area. This is important with regard to how much detergent and
rinse aid to use.
Run programs only with a full load
Wait to run a program until the dishwasher is full. This way you
save energy. Use the Rinse & Hold program to rinse the dishes if
there are any unpleasant odours while you wait for the dishwasher
to become fully loaded.
TOP UP WITH RINSE AID
Drying is faster if you use rinse aid.
1 Open the rinse aid compartment lid.
2 Carefully top up with rinse aid. Only add rinse aid to the level
marked max.
3 Wipe up any splashes of rinse aid around the compartment.
4 Close the lid firmly.
Run programs at a lower temperature
If the dishes are only slightly dirty, you can select a lower
temperature with certain programs. See also the section Selecting
Options in the chapter Using the dishwasher.
Select a program with Short dry
To save energy, use Short dry. The drying result will be better if,
once the program is finished, you leave the door slightly open.
Do not rinse under running water
Simply scrape off large food particles before loading the
dishwasher.
Choose a green detergent
Read the environmental declaration on the packaging!
Connect to cold water...
If you use oil or electricity to heat your home.
SELECTING THE RINSE AID DOSAGE
The rinse aid dispenser can be adjusted between
(High dosage).
(Off) and
Increase the rinse aid dosage:
• If the dishes have water marks.
Reduce the rinse aid dosage:
• If the dishes have a sticky white/blue film.
• If the dishes are streaked.
• Build-up of foam. If you have very soft water, the rinse aid can
be diluted 50:50 with water.
For water with a hardness greater than 10–12 °dH, you ought to
use rinse aid with citric acid (known as acid rinse aid).
SETTING THE RINSE AID DOSAGE
The section Settings describes how to set the rinse aid dosage.
REFILL RINSE AID INDICATOR
When the rinse aid needs topping up, the above symbol lights on
the display.
NOTE!
After topping up, it may take a while before the symbol goes
out.
Connect to hot water (max. 70 °C)...
If you use district heating, solar power or geothermal power to
heat your home. Choosing a hot water connection cuts program
times and reduces the dishwasher's electricity consumption.
FRAGILE DISHES
Some cookware is not dishwasher safe. This can be for several
reasons. Some materials cannot withstand strong heat, others can
be damaged by dishwashing detergent.
Fragile decoration
Porcelain with decoration on top of the glazing (the items feel
rough) should not be washed in a dishwasher.
Crystal/Glass
Position items so that they do not touch each other during the
wash. Use the lowest possible wash temperature and the shortest
possible program. Select Short dry. Antique and very fragile items
should not be washed in a dishwasher.
Glass washed in a dishwasher at high temperatures can gradually
develop a grey film that cannot be removed. Wash fragile glasses
at a low temperature and with a small amount of detergent.
Silver
Silver and stainless steel items should not come into contact, as
the silver can become discoloured.
Cutlery with glued handles
Some types of glue are not dishwasher safe. In such cases, the
handles may loosen.
4
Wood
Wooden items should only be washed in a dishwasher if marked
dishwasher safe.
Aluminium
Aluminium can lose its shine if washed in a dishwasher. However,
good quality aluminium pans can be washed in a dishwasher, even
if some of the shine will be lost.
Plastic items
Avoid washing plastic items that cannot withstand high
temperatures.
UPPER BASKET
Place glasses, cups, bowls, side plates and saucers in the upper
basket. Wine glasses are placed on the wine glass shelf and knives
are placed in the knife stand on the right (if fitted).
NOTE!
All dirty surfaces should face inwards and downwards!
CUTLERY BASKET
Place cutlery with the handles facing down, except for knives, and
spread them out as much as possible. Ensure that spoons do not
stack inside each other.
The cutlery basket is placed in the lower basket.
NOTE!
Do not place cutlery made of different materials, such as silver
and stainless steel, in the same place (risk of discolouration).
WARNING!
Knives and other pointed items must be placed with the points
down in the cutlery basket or horizontally in other baskets.
Fold-down section for small items
The cutlery basket has a fold-down section in the middle for small
items, or small shafts, such as electric whisk attachments.
a
LOWER BASKET
Place plates, side plates, serving dishes, pots and cutlery (in the
cutlery basket) in the lower basket.
b
c
Cutlery basket with lid
a
b
c
5
USING THE DISHWASHER
Positioning of cutlery basket lid (in upper basket)
The cutlery basket lid can be removed and used, for example, as
an extra cutlery basket in the upper basket (see below).
a
ADD DETERGENT
b
1 Prewash detergent compartment
2 Main wash detergent compartment
Detergent is added according to water hardness.
Follow the instructions on the detergent packaging.
Too much detergent can result in less effective dishwashing and
also entails greater environmental impact.
Add the detergent to the detergent compartment. There is one
compartment for the prewash and one for the main wash. If tablets
are not used, add a small amount of the detergent to the prewash
compartment. Contact the detergent manufacturer if you have
any questions about the detergent.
WARNING!
Children must be supervised – dishwasher detergent is corrosive!
NOTE!
Use only dishwasher detergent! Washing up liquid must not be
used as the foam that forms prevents the dishwasher from
operating effectively.
Dishwasher tablets
Halve the tablet if it is difficult to close the dispenser lid. There is
a risk that the detergent will not be released properly if the lid is
tight and will not open correctly.
NOTE!
Dishwasher tablets are not recommended for short programs
(less than 75 minutes). Use powder or liquid dishwasher
detergent instead.
3–in–1/All-in-one detergent
Read through the directions for these products carefully. If anything
is unclear, contact the detergent manufacturer.
6
PROGRAM SELECTION
Press the Program selector one or more times until the desired
program symbol appears on the display.
Heavy
Program for very dirty dishes, such as pans, casserole dishes and
oven dishes. If these dishes do not completely fill the dishwasher,
you can add plates and the like.
Normal
Use to wash normally dirty dishes, such as plates, serving dishes,
cups, glasses and so on.
For washing normally soiled mixed loads, with the best energy and
water performance, use the Normal; low temperature, short drying
(no options).
If you want to improve the dishwashing and drying result activate
the options high temperature and long drying
slight increase in energy consumption.
Rinse & Dry
This program comprises a rinse with heating and drying. This is a
suitable program if, for example, you plan to make jam and want
to rinse and heat clean glass jars.
Rinse & Hold
Used to rinse dishes while you wait for the dishwasher to become
fully loaded.
SELECTING OPTIONS
To select an option, press one of the option buttons. The field
under the button lights when the option is activated. The available
options depend on the selected program. Once you have started
the program, the options you selected are saved for the next time
you use the same program. An exception is the Delayed start
option.
. This causes a
Daily
A program suitable for day-to-day dishwashing. This program can
also clean dried leftovers, but is not intended for burnt food, such
as on oven dishes.
High temperature
Activate this option for improved dishwashing results. The machine
then uses a higher temperature for the main wash.
If you want to use the lower temperature, press again so that the
field under the button turns off.
You can vary the temperature as shown below:
Quick
This program is used for glasses and porcelain that is slightly dirty,
such as coffee cups.
Super Quick
Short program lasting about 15 minutes with acceptable results
for very slightly dirty dishes.
Delicate
If the dishes are not very dirty, you can select Delicate. This
program is intended for glasses and porcelain that have just been
used and as such do not require such a powerful program.
This program can be used for fragile dishes. Select Short dry if you
want to be especially cautious. See also the section Fragile dishes
in the chapter Loading the dishwasher.
Eco
Use when you want to save water. For normally dirty dishes.
Heavy:
55 °C / 70 °C
Normal:
50 °C / 65 °C
Daily:
60 °C / 65 °C
Quick:
30 °C / 60 °C
Super Quick: 30 °C / 60 °C
Delicate:
40 °C / 50 °C
Eco:
55 °C / 60 °C
Long dry
A higher temperature in the final rinse and a longer drying phase
improves the drying result if you activate the Long dry option. This
causes a slight increase in energy consumption. This option can be
used with all programs exceptRinse & Dry and Rinse & Hold.
If you want a program with Short dry, press again so that the field
under the button turns off.
Delayed start
When you select Delayed start, the dishwasher will start 1–24
hours after you press the Start/Stop button.
1 Press the button once to activate Delayed start. Press the
button several times – or hold it in – to set the desired number
of hours.
7
2 Press Start/Stop and the dishwasher counts down 1 hour at a
time and starts after the selected delay.
Press and hold Start/Stop for three seconds if you want to cancel
the Delayed start option.
STOPPING OR CHANGING A PROGRAM
If you want to change program after starting the dishwasher, open
the door then press and hold Start/Stop for three seconds. Add
more detergent if the lid of the detergent dispenser has opened.
Then choose a new program, press Start/Stop and close the door.
NOTE!
DO YOU WANT TO ADD MORE DISHES?
Remember to press the Start/Stop button to start the program.
Open the door. The dishwasher stops automatically. Add the
dishes, close the door and the dishwasher continues the program.
START THE DISHWASHER
Press and hold Start/Stop until the display shows
(the door
open symbol). This indicates that the dishwasher is ready to start.
Close the door properly, otherwise the dishwasher will not start.
IF THE DISHWASHER IS TURNED OFF USING
THE ON/LEFT-ON MODE BUTTON OR DUE TO
A POWER FAILURE
If the dishwashing program was not finished, the interrupted
program continues when power is restored.
NOTE!
If the machine does not start within 2 minutes of the last button
press, the display returns to showing the last program run.
TIME REMAINING
Once you have selected a program and options, the display
indicates how long the program took the last time it was used. The
remaining time is updated after the water for the final rinse has
been heated.
This may differ somewhat from time to time depending on the
temperature of the water supply, the amount of dishes, the
ambient temperature and other factors.
NOTE!
During the first run of each program, the remaining time
displayed can be slightly misleading, as the dishwasher is estimating
the time. When you run the program a second time, the
dishwasher will calculate the remaining time based on the
previous duration of the program.
8
NOTE!
During drying, the program is interrupted if the power is cut or
the door is open for more than 2 minutes.
ONCE THE PROGRAM HAS FINISHED
Once the program has finished and the door is opened "End"
appears on the display.
A buzzer also sounds at the end of the program. See the section
Settings, which describes how to change this function.
Once the dishwasher has finished, it uses only standby power. Turn
off the water supply valve after each use.
Drying
For additional drying the door should be opened 35 mm upon
completion of the drying cycle. For more information, see page
16 in the chapter Technical information.
SETTINGS
DO AS FOLLOWS TO OPEN THE SETTINGS MENU:
+
1. First, open the door. Turn off the dishwasher using the On/Left-on mode button (press and hold). Release the
button.
2. Press and hold the On/Left-on mode button until the display lights up.
3. Within five seconds, press and hold the Program selector and the Long dry button.
4. Release the buttons when the display shows
.
TIP!
Be sure to press right on the symbols, so as not to inadvertently activate any other button. Try again if you fail to
open the settings menu the first time.
Press to save the set value and continue to the next setting.
Current setting.
Current setting value.
Press to browse between setting values.
YOU CAN NOW ADJUST THE FOLLOWING SETTINGS:
Button press Options
(Off)
(On)
Settings
Description
Child lock
(Kid Safe™)
You can activate the child lock (button lock) option
to prevent children from starting the dishwasher.
Press the High temperature and Long dry buttons simultaneously to temporarily deactivate the button
lock when you want to start the dishwasher. The
button lock is automatically reactivated after 2 minutes.
Press Start/Stop to save the setting value and continue to the next setting.
If you do not want to change any other settings, keep pressing Start/Stop to step through the entire settings menu.
(Off)
(Low)
Buzzer volume
The dishwasher uses a buzzer to indicate when a
program is finished or when a fault has occurred.
(High)
Press Start/Stop to save the setting value and continue to the next setting.
9
Button press Options
(Off)
Settings
Description
Operation volume
This sound is used to confirm each button press.
(Low)
(High)
Press Start/Stop to save the setting value and continue to the next setting.
(Low)
LCD contrast
For adjusting the contrast of the display on the panel.
(High)
Press Start/Stop to save the setting value and continue to the next setting.
(Off)
Rinse aid
(Low dosage)
(High dosage)
Press Start/Stop to exit the settings menu.
10
Rinse aid dosage setting.
CARE AND CLEANING
COARSE FILTER
The coarse filter traps larger food particles, which cannot get past
the drainage pump. Empty the coarse filter as necessary.
1 Lift the coarse filter by the handle.
2 Empty the coarse filter. Remember to replace it!
NOTE!
The dishwasher must not be used without the filter in place!
Diswashing efficiency can be affected if the course filter is
incorrectly fitted. After cleaning ensure that filter handle is fully
locked with the handle pointing out of the dishwasher.
DRAINAGE PUMP
Coarse filter
The pump can be accessed from inside the dishwasher.
1 Cut the power to the dishwasher by pulling out the plug from
the wall socket!
2 Remove the coarse filter and pipe section.
3 Remove the small yellow fitted piece at the left of the bottom
drain (see illustration below).
FINE FILTER
Debris that collects on the fine filter is automatically rinsed away
during each wash. However, the fine filter and its pipe section
should be cleaned a couple of times a year.
1 Turn the handle anticlockwise once.
Fine filter
4 By inserting your finger into the hole you can turn the pump
blade to release anything blocking it.
1x
2 Lift the pipe section straight up by the handle. Free the coarse
filter to clean the pipe section.
3 Remove and clean the fine filter.
4 Replace in reverse order. Check that the edges seal properly
when replacing the fine filter.
Pipe section
5 Reinstall the fitted piece and filters.
6 Plug the machine in again.
If the dishwasher still does not start and a whirring sound is
heard, the overflow protection has been activated.
• Shut off the water.
• Remove the plug from the wall socket.
• Call the service division.
5 Lock the filter in place by turning the handle clockwise to the
stop position. The handle should point straight out from the
dishwasher.
1x
NOTE!
Do not forget to reinstall the fitted piece.
LOWER SPRAY ARM
Holes and bearings can sometimes become blocked.
11
1 Pull the lower spray arm straight up to release it.
DOOR
2 Remove any debris using a needle or the like. The spray arms
also have holes underneath.
When cleaning the edge around the door, use only a slightly damp
cloth (with a little cleaner if necessary).
WARNING!
Do not use a spray bottle or the like around the door lock. This
is to ensure that water does not penetrate the door catch and
come into contact with the electrical components.
UPPER SPRAY ARM
The upper basket must be removed before the upper spray arm
can be released.
1 Pull out the upper basket and turn the basket catch on each
runner outwards (see illustration). The basket can now be
removed.
LIMESCALE DEPOSITS
The dishwasher tub is made of stainless steel and is kept clean
through normal use. However, if you have hard water, limescale
deposits may form in the dishwasher. If this happens, run the
Normal program with high temperature and two tablespoons of
citric acid in the detergent compartment (with no dishes in the
machine).
FRONT PANEL
2 Loosen the upper spray arm in the same manner as the lower
spray arm and clean it.
12
Keep the touch buttons clean and free from grease. Wipe them
clean with a dry or slightly damp cloth. Never use cleaners – they
can scratch the surface. Use the On/Left-on mode button to turn
off the dishwasher before cleaning the touch buttons to avoid
activating any buttons unintentionally.
TROUBLESHOOTING
Display
Type of fault
Action
Overfilling
Call the service division.
Water outlet fault
See "Water remains in the dishwasher" in the table
below.
Water inlet fault
Check that the water tap is on.
Check whether dishwasher inlet hose is connected to
a pressure limiting valve (some pressure limiting valves
may restrict the supply of water to the dishwasher).
Inlet valve leakage
Turn off the water tap and call the service division.
Turn off the machine with the On/Left-on mode button and then turn it on again to clear the error message from the display.
Problem
Possible causes
Action
The dishes are not clean.
The spray arms do not rotate.
Remove the arms and clean them.
Check that the dishes are not blocking the
spray arms.
Spots or films on the dishes.
Old detergent. Detergent is a perishable
product.
Avoid large packages.
Incorrect detergent dosage.
Dose according to water hardness. Far too
much or far too little detergent results in
poorer dishwashing results.
Dishwashing program too weak.
Select a higher temperature or a more powerful program.
Dishes loaded incorrectly.
Do not cover porcelain with large bowls or
the like. Avoid placing very tall glasses in the
corners of the baskets.
Glasses and cups have toppled over during
the program.
Place dishes to sit steady.
The filter is not correctly fitted.
Screw the filter firmly into place. See the section Care and cleaning.
Incorrect rinse aid dosage setting.
See the sections Before washing for the first
time and Settings.
Too high temperature and/or too much deter- Wash crystal at a low temperature and with
gent can cause etching on crystal. Unfortunate- a conservative amount of detergent. Contact
ly, this cannot be repaired, only prevented. the detergent manufacturer.
The dishes have a sticky white/blue film.
Rinse aid dosage setting too high.
Reduce the amount. See the sections Before
washing for the first time and Settings. If you
have very soft water, you may want to dilute
the rinse aid 50:50 with water.
Spots on stainless steel or silver.
Some foodstuffs, such as mustard, mayonnaise, Rinse off these types of foodstuffs if not
lemon, vinegar, salt and dressings, can mark starting the dishwasher immediately. Why not
stainless steel if left for too long.
use the Rinse & Hold program.
All stainless steel can cause spots on silver if Silver and stainless steel items should not
they come into contact during dishwashing. come into contact during dishwashing.
Aluminium can also cause spots on dishes.
Spots left after washing.
Lipstick and tea can be difficult to wash off.
Use a detergent with a bleaching agent.
13
Problem
Possible causes
Action
Rattling sound when dishwashing.
The dishes are not correctly placed or the
spray arms are not rotating.
Check that the dishes are placed securely. Spin
the spray arms to make sure they can rotate.
The dishwasher does not start.
The Start/Stop start button has not been
pressed for long enough.
Press and hold Start/Stop until the display
The door is not properly closed.
Check.
A fuse/circuit breaker has been tripped.
Check.
shows
(the door open symbol). This
indicates that the dishwasher is ready to start.
The plug is not plugged into the wall socket. Check.
The water tap is turned off.
Check.
Overflow/leaks
Check.
A whirring sound (the drainage pump) is
Turn off the water tap. Pull out the plug and
heard from the dishwasher and does not stop call the service division.
when the power is cut with the On/Left-on
mode button.
Check that the Delayed start option has not Press and hold Start/Stop for three seconds
been selected.
if you want to cancel the Delayed start option.
Water remains in the dishwasher.
Bad odour in dishwasher.
Blocked drainage hose.
Loosen the drainage hose where it connects
to the sink unit's water trap. Check that no
debris has fastened. Is the cone-shaped part
of the pipe cut to an inner diameter of at least
14 mm?
Kink in drainage hose.
Check that the hose is free from kinks and
sharp bends.
The filters are blocked.
Clean the coarse and fine filters.
The filter is not locked in completely.
Ensure filter is completely locked with handle
pointing towards the door.
Debris in the drainage pump.
Clean the drainage pump. See the section
Care and cleaning.
Dirt around the seals and in corners.
Clean with washing-up brush and low foaming
cleaner.
Low temperature programs have been select- Run a program with a higher temperature
ed for a prolonged period.
about once a month.
The dishes are not dry enough.
Drying power too low.
Activate the Long dry option.
The dishwasher is not fully loaded.
Fully load the dishwasher.
Rinse aid needs topping up or dosage is set
too low.
Top up with rinse aid or increase the rinse aid
dosage. See the sections Before washing for
the first time and Settings.
Open the door a little once the program has
finished.
Cannot close door.
The baskets are not correctly positioned.
Check that the baskets are correctly positioned horizontally.
Check that the dishes are not blocking the
baskets from sliding properly into place.
14
Problem
Possible causes
Action
The touch buttons do not react when pressed. You have pressed the touch buttons too soon Wait a moment then try again.
after opening the door.
Dirt on the touch buttons.
Clean with a dry or slightly damp cloth.
Open the door until the display lights up.
If this symbol appears on the display the
door is not open enough.
Child lock (button lock) activated.
See the section Settings.
15
TECHNICAL INFORMATION
INFORMATION FOR TEST INSTITUTE
Energy labelling
Australian standard:
Number of place settings:
Dishwashing programs:
AS/NZS 2007
14
Normal; Low temperature, Short dry (no options)
The door should be opened upon completion of the drying cycle a distance of 35 mm at V.
V
Program time:
2:00 hours:minutes
Connection:
Cold water 20 °C
Test method for noise measurement: IEC 60704-2-3
Dosages during testing
Detergent:
In accordance with AS/NZS 2007
Prewash:
7.5 gram
Main wash:
25 gram
Rinse aid:
In accordance with AS/NZS 2007
Rinse aid dosage: 5
Loading the dishwasher
2
2
2
2
4
4
3
4
4
3
16
2
2
5
5
4 1 1 1 1
5
1
5
1
2
5
2
3
2
2
3
1
4 1 1 1 1
5
5
5 5
3
3
3
3
3
1
5
3
2
2
5
5
3
3
4 Forks
5 Knives
4
5
3
2 Dessertspoons
3 Soupspoons
4
4
4
4
1
2
5
4
4
4
1
1 Teaspoons
2
3
TECHNICAL DATA
Height:
Width:
Depth:
Weight:
Capacity:
Water pressure:
817-872 mm
596 mm
550 mm
49 kg 1)
14 place settings 2)
300 - 1000 kPa
0.3–10 kp/cm2
3–100 N/cm2
Electrical connection: See type plate.
Rated power:
See type plate.
1)
2)
Weight can vary due to different specifications.
In accordance with standard, AS/NZS 2007.
17
1189
596
573
550
550
519
[mm]
133-183
670
700
821 -872
680-760
377
444
195
54
INSTALLATION
49
30
30-94
*Remove locking nuts for an installed height of
820-821 mm.
**Door length.
It is important that you read through and follow the instructions
and directions below. Conduct installation and connection in
accordance with the separate installation instructions.
SAFETY INSTRUCTIONS
• Connections to electricity, water and drainage must be
performed by a qualified professional.
• Always follow applicable regulations for water, drainage and
electricity.
• An incorrect or flawed installation can result in higher
consumption of energy, water and detergent, which can result
in increased costs and poor dishwashing results. In order to
minimise noise it is important that you follow the instructions.
• Take care during installation! Wear protective gloves! There
must always be two people!
• Before screwing the dishwasher into place, test the dishwasher
by running the Rinse & Hold program. Check that the
dishwasher fills with water and drains. Check also that none of
the connections leak.
WARNING!
Turn off the water supply when installing the dishwasher!
WARNING!
The plug must be disconnected or power to the socket turned
off while the work is carried out!
SETUP
• The recess and connection dimensions are included in the
separate installation instructions. Check that all dimensions are
correct before starting the installation.
• Make sure the area on which the dishwasher is to be installed
is firm. Adjust the adjustable feet so that the dishwasher is level.
Tighten the lock nuts.
• Stronger door springs are available for purchase for dishwashers
with a fitted wooden door. Springs are available for various
weights and sizes of wooden door. Door springs can be
purchased from the retailer who sold you the dishwasher.
DRAINAGE CONNECTION
See the separate installation instructions for all necessary
information.
The drainage hose may be extended by a maximum of 3 m (the
total length of the drainage hose must not exceed 4.5 m). Any
joins and connecting pipes must have an internal diameter of at
least 14 mm. However, the drainage hose should ideally be
replaced with a new hose without joins.
No part of the drainage hose may be more than 950 mm above
the bottom of the dishwasher. The hose must not be routed
directly to a floor drain or the like. In such cases, the hose can act
as a siphon and empty the dishwasher.
The hose must always discharge at least 350 mm above the bottom
of the machine.
Ensure that the drainage hose has no kinks.
18
SERVICE
NOTE!
The hose must be attached at the same height as the underside
of the sink.
Read chapter Troubleshooting before contacting the service
department. Note down the details on the rating plate positioned
on the right inside the dishwasher. Note down the item number
(1) and serial number (2).
1
CONNECTION TO WATER SUPPLY
Use only the supply hose provided with the dishwasher. Do not
re-use old hoses or other spare supply hoses.
The supply pipe must be fitted with a stopcock. The stopcock must
be easily accessible, so that the water can be shut off if the
dishwasher has to be moved.
ART. NO.
SERIAL NO.
2
Once the installation is complete, the stopcock should be opened
to allow the pressure to settle for a while and to check that all
connections are tight.
Connect to cold water...
If you use oil or electricity to heat your home.
Connect to hot water (max. 70 °C)...
If you use district heating, solar power or geothermal power to
heat your home. Choosing a hot water connection cuts program
times and reduces the dishwasher's electricity consumption.
NOTE!
Connecting a dishwasher to the water supply via certain types
of pressure limiting valves may restrict the water supply!
This may cause F:12 error code/ Water inlet fault to be displayed.
ELECTRICAL CONNECTION
Information about the electrical connection can be found on the
serial number plate This specification must match the electricity
supply.
Dishwashers fitted with a plug must be connected to an earthed
socket.
The electric wall socket must be placed outside of the installation
area to be easily accessible after installing the dishwasher. Do not
use an extension cord!
NOTE!
Repairs and maintenance must be carried out by a qualified
professional.
19
20
0
Eco
The energy label performance figures are based on this program.
0:06
Connection to hot water, approx. 60 °C.
0.01
0:40
2:05
0:15
0:20
1:25
1:30
1:50
2:40
4)
0:06
0.5
0.8
0.2
0.2
0.9
1.3
0.9
1.5
Connection to cold water, approx. 20 °C.
-
0:45
2:20
0:15
0:20
1:40
1:40
2:00
2:55
3)
1
50
50
-
-
50
65
55
65
Consumption values vary depending on the temperature of the incoming water, room temperature, load size, selected additional functions and more.
-
1
2
2
2
2
2
2
3
2)
0
Rinse & Hold -
-
55
30
30
40
60
50
55
Hot water 3)
1)
0.01
0.4
0.5
0.1
0.1
0.2
0.9
0.4
1.0
Wash time
Energy
Wash time
Energy
(approx. hours:minutes) (approx. kWh) (approx. hours:minutes) (approx. kWh)
Cold water 2)
Consumption values
1)
0
Rinse & Dry
-
0
1
Super Quick -
-
Delicate
1
0
-
Daily
1
2
-
-
Normal 4)
Quick
-
Options Prewashes Main wash (°C) Number Final
of rinses rinse temperature
(°C)
Heavy
Program
3
3
11
10
10
15
14
14
19
Water consumption
(liter)
PROGRAM CHART
YOUR NOTES
21
YOUR NOTES
22
YOUR NOTES
23
QUICK GUIDE
1.
LOAD THE BASKETS (SEE PAGE 4)
2.
CHECK THAT THE SPRAY ARMS CAN ROTATE FREELY
3.
ADD DETERGENT (SEE PAGE 6)
4.
PRESS AND HOLD THE ON/LEFT-ON MODE BUTTON
UNTIL THE DISPLAY LIGHTS UP
5.
SELECT A PROGRAM AND ANY OPTIONS (SEE PAGE 7)
6.
PRESS AND HOLD START/STOP FOR TWO SECONDS AND
CLOSE THE DOOR (SEE PAGE 8)
Do not rinse dishes under running water before loading them in the dishwasher.
Simply scrape off large food particles before loading the dishwasher.
Check also that the water tap is on.
The detergent compartment has one smaller compartment for the prewash and
one for the main wash.
en (03-14)
ASKO APPLIANCES AB • SOCKERBRUKSGATAN 3, SE-531 40 LIDKÖPING, SWEDEN • WWW.ASKO.COM
Art. No.: 701758. Rev. 02. We reserve the right to make changes.
Two minutes after the last button press, the panel backlight enters energy saving
mode. Close and reopen the door, or press the On/Left-on mode button, to
reactivate the panel.