T.I.P. Troubleshooting Information on Power Gear

1217 E. 7th Street
Mishawaka, IN 46544
Phone: 1-800-334-4712
1-888-339-2539
Fax:
574-256-6743
T.I.P. Troubleshooting Information on Power Gear
SERVICE KIT (PG# 800126S) ABF MANUAL TO ELECTRIC
Instructions for removal of manual actuator:
1.
2.
3.
4.
5.
Refer to Diagram A.
Remove socket head screws (1A) and washers (2A) to release spring tension (3A).
Remove hex head bolts (4A) and mounting plate (5A). Note: Save these parts for re-assembly.
Remove nuts (6A), washers (7A), and cover plate (8A).
Remove hex head bolts (9A), and manual actuator (10A) and gear shaft assembly (11A) should be free
to be removed.
Diagram A
TIP Sheet #174
82-S0352-T REV. 0
01-03
Page 1 of 3
1217 E. 7th Street
Mishawaka, IN 46544
Phone: 1-800-334-4712
1-888-339-2539
Fax:
574-256-6743
T.I.P. Troubleshooting Information on Power Gear
Instructions for re-assembly of electric actuation:
1.
2.
3.
4.
5.
6.
Refer to Diagram B.
Install gear shaft (2B) into motor with disengagement box (1A).
Install mounting plate (3B) onto disengagement box using cap screws (4B).
Install motor and gear shaft assembly into roller rack using flange bolts (6B).
Install mounting plate (5A) with bolts (4A).
Wire motor to 12V power supply using switch and relay supplied. Note: See wiring diagram.
Diagram B
TIP Sheet #174
82-S0352-T REV. 0
01-03
Page 2 of 3
1217 E. 7th Street
Mishawaka, IN 46544
Phone: 1-800-334-4712
1-888-339-2539
Fax:
574-256-6743
T.I.P. Troubleshooting Information on Power Gear
Bill of Materials:
Item #
3B
2B
4B
1B
6B
P/N
DN13736
DN13762
DN13769
DN14370
150-1468
Description
DISENGAGEMENT BOX MTG PLT
SHAFT ASSY ABF
5/16"-18 X 5/8" CAP SCREW
DISENGAGE BOX W/CAST BOX/
BOLT FLANGE 5/16-18x3/4 H
Qty
1
1
2
1
2
Not Shown:
522671
ELECT KIT ABF S/O (TRM)
1
Electric Kit Includes:
DN13819
IP10260
IP10265
RELAY PACK NON-WATER PROO
SWITCH COVER WHITE
SWITCH ROCKER WHITE S4-36
1
1
1
Wiring Diagram
TIP Sheet #174
82-S0352-T REV. 0
01-03
Page 3 of 3
Download PDF