OPERATION AND PARTS MANUAL
SERIES
MODEL MVC88VTH
MODEL MVC88VTHW
ONE-WAY PLATE COMPACTOR
(HONDA GX160UT2QMX2/GX160UT2QMXC/
GX160UT2QCM GASOLINE ENGINES)
Revision #9 (09/14/17)
To find the latest revision of this
publication, visit our website at:
www.multiquip.com
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
PROPOSITION 65 WARNING
PAGE 2 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
NOTES
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 3
TABLE OF CONTENTS
MVC88VTH/MVC88VTHW
Forward Plate Compactor
Proposition 65 Warning............................................ 2
Table Of Contents..................................................... 4
Parts Ordering Procedures....................................... 5
Safety Information............................................... 6-10
Specifications......................................................... 11
Noise And Vibration Emissions............................... 12
Dimensions............................................................. 13
General Information................................................ 14
Compactor Components.................................... 15-16
Inspection.......................................................... 17-18
Startup............................................................... 19-20
Operation........................................................... 21-22
Maintenance...................................................... 23-28
Explanation Of Code In Remarks Column............. 30
Suggested Spare Parts.......................................... 31
Compactor Component Drawings
Body Assembly.................................................. 32-37
Vibrator Plate/Case Assembly........................... 38-39
Transport Wheel Assembly (Option).................. 40-41
Sprinkler Assembly............................................ 42-43
Urethane Plate Assembly (Option).................... 44-45
Nameplate And Decals Assembly..................... 46-47
Honda GX160UT2QMX2,
GX160UT2QMXC AND
GX160UT2QCM ENGINES
EngineComponent Drawings
Cylinder Head Assembly................................... 48-49
Cylinder Barrel Assembly.................................. 50-51
Crankcase Cover Assembly.............................. 52-53
Crankshaft Assembly......................................... 54-55
Piston Assembly................................................ 56-57
Camshaft Assembly........................................... 58-59
Recoil Starter Assembly.......................................60-61
Fan Cover Assembly......................................... 62-63
Carburetor Assembly......................................... 64-65
Air Cleaner Assembly (QMX2).......................... 66-67
Air Cleaner Assembly (QMXC).......................... 68-69
Air Cleaner Assembly (QCM)............................ 70-71
Muffler Assembly............................................... 72-73
Fuel Tank Assembly........................................... 74-75
Flywheel Assembly............................................ 76-77
Ignition Coil Assembly (QMXT/QMXC).............. 78-79
Ignition Coil Assembly (QCM)........................... 80-81
Control Assembly..................................................82-83
Decals Assembly..................................................84-85
Terms and Conditions of Sale — Parts.................. 86
NOTICE
Part numbers are subject to change without notice.
PAGE 4 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
www.multiquip.com
PARTS ORDERING PROCEDURES
Ordering parts has never been easier!
Choose from three easy options:
Order via Internet (Dealers Only):
Best Deal!
Effective:
January 1st, 2006
If you have an MQ Account, to obtain a Username
and Password, E-mail us at: parts@multiquip.
com.
Order parts on-line using Multiquip’s SmartEquip website!
■ View Parts Diagrams
■ Order Parts
■ Print Specification Information
To obtain an MQ Account, contact your
District Sales Manager for more information.
Use the internet and qualify for a 5% Discount
on Standard orders for all orders which include
complete part numbers.*
Goto www.multiquip.com and click on
Order Parts to log in and save!
Note: Discounts Are Subject To Change
Order via Fax (Dealers Only):
All customers are welcome to order parts via Fax.
Domestic (US) Customers dial:
1-800-6-PARTS-7 (800-672-7877)
Fax your order in and qualify for a 2% Discount
on Standard orders for all orders which include
complete part numbers.*
Note: Discounts Are Subject To Change
Order via Phone: Domestic (US) Dealers Call:
1-800-427-1244
Non-Dealer Customers:
Contact your local Multiquip Dealer for
parts or call 800-427-1244 for help in
locating a dealer near you.
International Customers should contact
their local Multiquip Representatives for
Parts Ordering information.
When ordering parts, please supply:
❒
❒
❒
❒
❒
❒
Dealer Account Number
Dealer Name and Address
Shipping Address (if different than billing address)
Return Fax Number
Applicable Model Number
Quantity, Part Number and Description of Each Part
❒
Specify Preferred Method of Shipment:
✓ UPS/Fed Ex
✓ DHL
■ Priority One
✓ Truck ■ Ground
■ Next Day
■ Second/Third Day
NOTICE
All orders are treated as Standard Orders and will
ship the same day if received prior to 3PM PST.
WE ACCEPT ALL MAJOR CREDIT CARDS!
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 5
SAFETY INFORMATION
Do not operate or service the equipment before reading
the entire manual. Safety precautions should be followed
at all times when operating this equipment.
Failure to read and understand the safety
messages and operating instructions could
result in injury to yourself and others.
Potential hazards associated with the operation of this
equipment will be referenced with hazard symbols which
may appear throughout this manual in conjunction with
safety messages.
SAFETY MESSAGES
The four safety messages shown below will inform you
about potential hazards that could injure you or others. The
safety messages specifically address the level of exposure
to the operator and are preceded by one of four words:
DANGER, WARNING, CAUTION or NOTICE.
SAFETY SYMBOLS
DANGER
Indicates a hazardous situation which, if not avoided,
WILL result in DEATH or SERIOUS INJURY.
WARNING
Indicates a hazardous situation which, if not avoided,
COULD result in DEATH or SERIOUS INJURY.
CAUTION
Indicates a hazardous situation which, if not avoided,
COULD result in MINOR or MODERATE INJURY.
NOTICE
Addresses practices not related to personal injury.
PAGE 6 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
SAFETY INFORMATION
GENERAL SAFETY
CAUTION
„ NEVER operate this equipment without proper protective
clothing, shatterproof glasses, respiratory protection,
hearing protection, steel-toed boots and other protective
devices required by the job or city and state regulations.
„ NEVER operate this equipment when not
feeling well due to fatigue, illness or when
under medication.
„ NEVER operate this equipment under the influence of
drugs or alcohol.
„ ALWAYS check the equipment for loosened threads or
bolts before starting.
„ DO NOT use the equipment for any purpose other than
its intended purposes or applications.
NOTICE
„ This equipment should only be operated by trained and
qualified personnel 18 years of age and older.
„ Whenever necessary, replace nameplate, operation and
safety decals when they become difficult read.
„ Manufacturer does not assume responsibility for any
accident due to equipment modifications. Unauthorized
equipment modification will void all warranties.
„ NEVER use accessories or attachments that are not
recommended by Multiquip for this equipment. Damage
to the equipment and/or injury to user may result.
„ ALWAYS know the location of the nearest
fire extinguisher.
„ ALWAYS know the location of the nearest
first aid kit.
„ ALWAYS know the location of the nearest phone or keep
a phone on the job site. Also, know the phone numbers
of the nearest ambulance, doctor and fire department.
This information will be invaluable in the case of an
emergency.
„ ALWAYS clear the work area of any debris, tools, etc.
that would constitute a hazard while the equipment is
in operation.
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 7
SAFETY INFORMATION
COMPACTOR SAFETY
DANGER
„ NEVER operate the equipment in an explosive
atmosphere or near combustible materials. An
explosion or fire could result causing severe
bodily harm or even death.
WARNING
„ NEVER disconnect any emergency or safety devices.
These devices are intended for operator safety.
Disconnection of these devices can cause severe injury,
bodily harm or even death. Disconnection of any of these
devices will void all warranties.
CAUTION
„ NEVER lubricate components or attempt service on a
running machine.
NOTICE
„ ALWAYS keep the machine in proper running condition.
„ Fix damage to machine and replace any broken parts
immediately.
„ ALWAYS store equipment properly when it is not being
used. Equipment should be stored in a clean, dry location
out of the reach of children and unauthorized personnel.
WARNING
„ DO NOT place hands or fingers inside engine
compartment when engine is running.
„ NEVER operate the engine with heat shields or
guards removed.
„ Keep fingers, hands hair and clothing away
from all moving parts to prevent injury.
CAUTION
„ NEVER touch the hot exhaust manifold,
muffler or cylinder. Allow these parts to
cool before servicing equipment.
NOTICE
„ NEVER run engine without an air filter or with a dirty air
filter. Severe engine damage may occur. Service air filter
frequently to prevent engine malfunction.
„ NEVER tamper with the factory settings
of the engine or engine governor. Damage
to the engine or equipment can result
if operating in speed ranges above the
maximum allowable.
„ NEVER tip the engine to extreme angles during lifting as
it may cause oil to gravitate into the cylinder head, making
the engine start difficult.
ENGINE SAFETY
DANGER
„ The engine fuel exhaust gases contain poisonous carbon
monoxide. This gas is colorless and odorless, and can
cause death if inhaled.
„ The engine of this equipment requires an adequate
free flow of cooling air. NEVER operate this equipment
in any enclosed or narrow
area where free flow of the
air is restricted. If the air
flow is restricted it will cause
injury to people and property
and serious damage to the
equipment or engine.
PAGE 8 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
SAFETY INFORMATION
FUEL SAFETY
BATTERY SAFETY (ELECTRIC START ONLY)
DANGER
DANGER
„ DO NOT add fuel to equipment if it is placed inside truck
bed with plastic liner. Possibility exists of explosion or
fire due to static electricity.
FUEL
„ DO NOT drop the battery. There is a possibility that the
battery will explode.
„ DO NOT expose the battery to open flames,
sparks, cigarettes, etc. The battery contains
combustible gases and liquids. If these
gases and liquids come into contact with a
flame or spark, an explosion could occur.
WARNING
FUEL
„ ALWAYS wear safety glasses when
handling the battery to avoid eye irritation.
The battery contains acids that can cause
injury to the eyes and skin.
„ Use well-insulated gloves when picking up
the battery.
„ DO NOT start the engine near spilled fuel or combustible
fluids. Diesel fuel is extremely flammable and its vapors
can cause an explosion if ignited.
„ ALWAYS refuel in a well-ventilated area, away from
sparks and open flames.
„ ALWAYS use extreme caution when working with
flammable liquids.
„ DO NOT fill the fuel tank while the engine is running
or hot.
„ DO NOT overfill tank, since spilled fuel could ignite if it
comes into contact with hot engine parts or sparks from
the ignition system.
„ Store fuel in appropriate containers, in well-ventilated
areas and away from sparks and flames.
„ NEVER use fuel as a cleaning agent.
„ DO NOT smoke around or near the
equipment. Fire or explosion could result
from fuel vapors or if fuel is spilled on a
hot engine.
„ ALWAYS keep the battery charged. If the battery is not
charged, combustible gas will build up.
„ DO NOT charge battery if frozen. Battery can explode.
When frozen, warm the battery to at least 61°F (16°C).
„ ALWAYS recharge the battery in a well-ventilated
environment to avoid the risk of a dangerous concentration
of combustible gases.
„ If the battery liquid (dilute sulfuric acid)
comes into contact with clothing or skin,
rinse skin or clothing immediately with
plenty of water.
„ If the battery liquid (dilute sulfuric acid) comes into
contact with eyes, rinse eyes immediately with plenty
of water and contact the nearest doctor or hospital to
seek medical attention.
CAUTION
„ ALWAYS disconnect the NEGATIVE battery terminal
before performing service on the equipment.
„ ALWAYS keep battery cables in good working condition.
Repair or replace all worn cables.
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 9
SAFETY INFORMATION
TRANSPORTING SAFETY
CAUTION
„ NEVER allow any person or animal to stand underneath
the equipment while lifting.
NOTICE
„ When the life cycle of this equipment is over, remove
battery and bring to appropriate facility for lead
reclamation. Use safety precautions when handling
batteries that contain sulfuric acid.
„ When the life cycle of this equipment is over, it is
recommended that the trowel frame and all other metal
parts be sent to a recycling center.
„ Before lifting, make sure that the equipment parts (hook
and vibration insulator) are not damaged and screws are
not loose or missing.
Metal recycling involves the collection of metal from
discarded products and its transformation into raw
materials to use in manufacturing a new product.
„ Always make sure crane or lifitng device has been
properly secured to the lifting bail (hook) of the
equipment.
Recyclers and manufacturers alike promote the process
of recycling metal. Using a metal recycling center
promotes energy cost savings.
„ ALWAYS shutdown engine before transporting.
„ NEVER lift the equipment while the engine is running.
„ Tighten fuel tank cap securely and close fuel cock to
prevent fuel from spilling.
„ Use adequate lifting cable (wire or rope) of sufficient
strength.
„ Use one point suspension hook and lift straight
upwards.
„ DO NOT lift machine to unnecessary heights.
„ ALWAYS tie down equipment during transport by
securing the equipment with rope.
ENVIRONMENTAL SAFETY/DECOMMISSIONING
NOTICE
Decommissioning is a controlled process used to safely
retire a piece of equipment that is no longer serviceable.
If the equipment poses an unacceptable and unrepairable
safety risk due to wear or damage or is no longer cost
effective to maintain (beyond life-cycle reliability) and is to
be decommissioned (demolition and dismantlement),be
sure to follow rules below.
EMISSIONS INFORMATION
NOTICE
The gasoline engine used in this equipment has been
designed to reduce harmful levels of carbon monoxide
(CO), hydrocarbons (HC) and nitrogen oxides (NOx)
contained in gasoline exhaust emissions.
This engine has been certified to meet US EPA Evaporative
emissions requirements in the installed configuration.
Attempting to modify or make adjustments to the engine
emmission system by unauthorized personnel without
proper training could damage the equipment or create an
unsafe condition.
Additionally, modifying the fuel system may adversely affect
evaporative emissions, resulting in fines or other penalties.
Emission Control Label
The emission control label is an integral part of the emission
system and is strictly controlled by regulation(s).
The label must remain with the engine for its entire life.
If a replacement emission label is needed, please contact
your authorized engine distributor.
„ DO NOT pour waste or oil directly onto the ground, down
a drain or into any water source.
„ Contact your country's Department of
Public Works or recycling agency in your
area and arrange for proper disposal of
any electrical components, waste or oil
associated with this equipment.
PAGE 10 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
SPECIFICATIONS
Table 1. MVC88VTH/VTHW
Plate Compactor Specifications
Centrifugal Force
3,372 lbs. (1,530 kg)
Vibration Frequency
6,000 vpm (60 Hz)
Traveling Speed
82 ft/min (25 m/min)
Plate Size (L x W)
19.7 x 20.7 in (.500 x .525 mm)
Max. Area of Compaction (no extensions)
8,100 sq. ft./hr (752 sq. m/hr)
Operating Weight MVC88VTH
207 lbs. (95 kg.)
Operating Weight MVC88VTHW
229 lbs. (104 kg.)
Water Tank Capacity
13.7 qt (13.0 liters)
Anti-Vibration Handle
Yes
Lubricating Oil in Vibration Case
6.7 fl. oz. (200 cc)
Table 2. Engine Specifications
Engine Make
Engine Model
Engine Type
Cylinder Bore X Stroke
Displacement
Maximum Ouput
Fuel Tank Capacity
Fuel Type
Oil Capacity
Air Cleaner
Starting Method
Dry Net Weight Recoil/Electric
Dimensions (L x W x H)
HONDA
GX160UT2QMX2
GX160UT2QMXC
GX160UT2QCM
Air-cooled 4 stroke, Single Cylinder, OHV, Horizontal Shaft
Gasoline Engine
2.7 in. x 1.8 in. (68 mm x 45 mm)
163 cc (9.9 cu-in)
4.8 HP (3.6 kW) @ 3600 RPM
Approx. .825 U.S. gallons (3.1 liters)
Unleaded 86 Octane or Higher
.61 qts (0.58 liters)
Dual Filter Element
Cyclone Dual Filter Element
Recoil Start
33 lbs (15 Kg.)
12.2 x 14.3 x 13.6 in (312 x 362 x 346 mm)
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 11
NOISE AND VIBRATION EMISSIONS
Table 3. Noise and Vibration Emissions
Measured Sound Power Level in dB(A)
104
Guaranteed Sound Power Level in dB(A)
105
Guaranteed Sound Pressure Level at Operator Station in dB(A)
94
Hand-Arm Vibration in m/s2
2.1
NOTES:
1. Products are tested for sound pressure level in accordance with European Directives 2000/14/EC and 2005/88/EC, relating to Noise Emission
in the Environment by equipment for use outdoors.
2. Products are tested for hand/arm vibration (HAV) level in accordance with European Directives 2002/44/EC and EN500-4 and ISO 5349-1:2001,
ISO 5349-2:2001.
PAGE 12 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
DIMENSIONS
E
A
B
F
C
D
Figure 1. Dimensions
Table 4. Dimensions
REF. DES
IN. (MM)
A
21.9 (557)
B
20.6 (525)
C
32.6 (830)
D
37.4(950)
E
41.3 (1050)
F
19.7 (500)
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 13
GENERAL INFORMATION
DEFINITION OF PLATE COMPACTOR
FREQUENCY/SPEED
The Mikasa MVC88VTH/VTHW is a walk behind, plate
compactor designed for the compaction of sand, mixed soils
and asphalt. This plate compactor is a powerful compacting
tool capable of applying a tremendous force in consecutive
high frequency vibrations to a soil surface. Its applications
include compacting for road, embankments and reservoirs
as well as backfilling for gas pipelines, water pipelines and
cable installation work.
The compactor's vibrating plate produces a vibration
frequency of 6,000 VPM (vibrations per minute). The
travel speed of the compactor is approximately 82 ft/
minute (25 meters/minute).
VIBRATORY PLATES
The vibratory plates of the compactor produce low
amplitude high frequency vibrations, designed to compact
granular soils and asphalt.
The resulting vibrations cause forward motion. The engine
and handle are vibration isolated from the vibrating plate.
ENGINE
These plate compactors are equipped with Honda GX160
series air cooled, 4-cycle gasoline engines. Reference
Table 2 for complete specifications. The engine drives an
eccentric weight at a high speed to develop a compaction
force.
In addition this engine is equipped with an oil alert system
that will automatically stop the engine before the engine
falls below safe engine oil operating limits. Always be sure
to check the engine oil level prior to starting the engine.
CONTROLS
Before starting the plate compactor identify and understand
the function of all the controls and components.
PAGE 14 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
COMPACTOR COMPONENTS
1
MVC88VTHW
MVC88VTH
2
9
3
4
8
10
5
OFF
6
ON
7
11
Figure 2. Plate Compactor Components
Figure 2 shows the location of the basic controls and
components of the MVC88VTH/VTHW Plate Compactor.
The function of each control is described below:
1. Handle Bar – When operating the compactor use this
handle bar to manuever the compactor.
2. Lifting Bale – When lifting of the compactor is required
either by forklift, crane etc., tie rope or chain around
this lifting point.
3. Fuel Tank Cap – Remove this cap to add fuel. Use
only unleaded fuel with an octane rating of 86 or higher
4. Water Tank Cap (VTHW Only) – Remove this cap to
add water to the water tank.
5. Water Tank (VTHW only) – Holds 13.7 quarts of water
(removable, no tools required).
6. Vibrating Plate – A flat, open plate made of durable
cast iron construction used in the compacting of soil.
7. Water Tube-Sprinkler (VTHW Only) – Supplies water
to the soil via a splash plate.
8. Water Shut-Off Valve (VTHW Only) – Turn this valve
downward to let water flow from the water tank to the
water tube.
9. Engine – These plate compactors use a Honda
GX160, 4.8 HP, air-cooled 4 stroke gasoline engine.
Refer to the Honda owner's manual for more detailed
engine information and related topics.
10. Belt Cover – Remove this cover to gain acess to the
V-belts. NEVER run the compactor without the V-belt
cover. If the V-belt cover is not installed, the possibility
exists that your hand may get caught between the V-belt
and clutch, causing serious injury and bodily harm.
11. Eccentric Housing – Encloses the eccentric, gears
and counter weights.
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 15
COMPACTOR COMPONENTS
10
2
1
11
9
8
3
7
6
5
4
Figure 3. Engine Controls and Components
INITIAL SERVICING
The engine (Figure 3) must be checked for proper
lubrication and filled with fuel prior to operation. Refer to the
manufacturer's engine manual for instructions and details
of operation and servicing.
5. Fuel Valve Lever – OPEN to let fuel flow, CLOSE to
stop the flow of fuel.
6. Oil Drain Plug – Remove this plug to remove oil from
the engine's crankcase.
1. Throttle Lever – Used to adjust engine RPM speed.
For normal operation this lever should always be placed
in the RUN position.
7. Dipstick/Oil Filler Cap – Remove this cap to determine
if the engine oil is low. Add oil through this filler port as
recommended in (Table 5).
2. Fuel Filler Cap/Fuel Tank – Remove this cap to add
unleaded gasoline to the fuel tank. Fill with unleaded
gasoline. Refer to Table 2 for fuel tank capacity. Make
sure cap is tightened securely. DO NOT over fill. For
additional information refer to Honda engine owner's
manual.
8. Choke Lever – Used in the starting of a cold engine,
or in cold weather conditions. The choke enriches the
fuel mixture.
DANGER
Add fuel to the tank only when the engine
is stopped and has had an opportunity to
cool down. In the event of a fuel spill, DO
NOT attempt to start the engine until the
fuel residue has been completely wiped up
and the area surrounding the engine is dry.
3. Engine ON/OFF Switch – ON position permits engine
starting, OFF position stops engine operation.
9. Spark Plug – Provides spark to the ignition system.
Set spark plug gap according to engine manufacturer's
instructions. Clean spark plug once a week.
10. Muffler – Used to reduce noise and emissions. NEVER
touch when hot!
11. Air Cleaner – Prevents dirt and other debris from
entering the fuel system. Remove wing-nut on top
of air filter cover to gain access to filter element. In
addition your unit may be equipped with a cyclone type
air cleaner. Reference the maintenance section in this
manual for servicing.
4. Recoil Starter (Pull Rope) – Manual-starting method.
Pull the starter grip until resistance is felt, then pull
briskly and smoothly.
PAGE 16 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
INSPECTION
Before Starting
DANGER
1. Read all safety instructions at the beginning of manual.
EXPLOSIVE FUEL!
2. Clean the compactor, removing dirt and dust,
particularly the engine cooling air inlet, carburetor and
air cleaner.
Motor fuels are highly flammable and can
be dangerous if mishandled. DO NOT
smoke while refueling. DO NOT attempt
to refuel the compactor if the engine is
hot! or running.
3. Check the air filter for dirt and dust. If air filter is dirty,
replace air filter with a new one as required.
4. Check carburetor for external dirt and dust. Clean with
dry compressed air.
5. Check fastening nuts and bolts for tightness.
Fuel Check
1. Visually inspect (Figure 6) to see if fuel level is low. If
fuel is low, replenish with unleaded fuel.
Engine Oil Check
FUEL
CAP
1. To check the engine oil level, place the compactor on
secure level ground with the engine stopped.
2. Remove the dipstick from the engine oil filler hole
(Figure 4) and wipe clean.
DIPSTICK
Figure 6. Fuel Check
Figure 4. Engine Oil Dipstick Removal
3. Insert and remove the dipstick without screwing it into
the filler neck. Check the oil level shown on the dipstick.
4. If the oil level is low (Figure 5), fill to the edge of the
oil filler hole with the recommended oil type as listed
in Table 5. Reference Table 2 for maximum engine oil
capacity.
2. When refueling, be sure to use a strainer for filtration.
DO NOT top-off fuel. Wipe up any spilled fuel
immediately.
Water Tank (Option)
If your unit is equipped with a water tank (Figure 7) and
your applications requires water, fill water tank.
UPPER LIMIT
LOWER LIMIT
WATER
TANK
WATER
SOURCE
Figure 5. Engine Oil Dipstick (Oil Level)
Table 5. Oil Type
Season
Temperature
Oil Type
Summer
25°C or Higher
SAE 10W-30
Spring/Fall
25°C~10°C
SAE 10W-30/20
Winter
0°C or Lower
SAE 10W-10
Figure 7. Water Tank Filling
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 17
INSPECTION
V-BELT
V-Belt Tension
V-Belt Cover Removal
The V-belt tension is proper if the V-belt bends 10 to 15 mm
(Figure 10) when depressed with finger at midway between
the clutch and vibrator pulleys.
To inspect the V-belt, remove the three bolts that secure
the belt cover to the frame as shown in Figure 8.
REMOVE
VIBRATOR
CORRECT V-BELT
TENSION 10-15 MM
WHEN DEPRESSED
AS SHOWN.
CLUTCH
PULLEY
REMOVE
V-BELT
V-BELT
asa
ik
M
VIBRATOR
PULLEY
V-BELT COVER
Figure 8. V-Belt Cover Removal
V-Belt Inspection
Visually examine the V-belt (Figure 9) and determine if it
is full of tiny cracks, frayed, has pieces of rubber missing,
is peeling or otherwise damaged.
Also, examine the belt and determine if it is oil soaked or
"glazed " (hard shiny appearance on the sides of the belt).
Either of these two conditions can cause the belt to run hot,
which can weaken it and increase the danger of it breaking.
If the V-belt exhibits any of the referenced wear conditions
replace the V-belt immediately.
Figure 10. V-Belt Tension
Vibrator Oil Check
1. Place the plate compactor horizontally on a flat surface.
Make sure the compactor is level when checking the
oil in the vibrator assembly.
2. Check vibrator oil level by removing the oil plug (vibrator
oil gauge) as shown in Figure 11. The oil level should
be up to the oil plug.
3. The vibrator holds approximately 6.7 oz. (200 cc).
IMPORTANT, if oil is required, replace using only SAE
10W-30 motor oil.
VIBRATOR
OIL SOAKED
OIL PLUG
PACKING
GLAZED
CORD FAILURE
WORN BACK
COVER
BROKEN
MISSING RUBBER
Figure 11. Vibrator Oil Check
CRACKS
SIDEWALL
WEAR
Figure 9. Drive Belt Inspection
PAGE 18 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
STARTUP
CAUTION
DO NOT attempt to operate the compactor
until the Safety, General Information and
Inspection sections of this manual have
been read and thoroughly understood.
3. Place the choke lever in the OPEN position (Figure 14)
if starting a warm engine, or if the ambient temperature
is warm.
This section is intended to assist the operator with the
initial start-up of the compactor. It is extremely important
that this section be read carefully before attempting to use
the compactor in the field.
CHOKE LEVER
STARTING THE ENGINE
1. Place the engine fuel valve lever (Figure 12) to the
“ON” position.
CLOSE
OPEN
Figure 14. Engine Choke Lever (Open)
4. Place the choke lever (Figure 15) in the “CLOSED”
position if starting a cold engine.
FUEL VALVE
LEVER
OFF
ON
CHOKE LEVER
Figure 12. Engine Fuel Valve Lever
(ON Position)
2. Move the throttle lever (Figure 13) away from the SLOW
position, about 1/3 of the way toward the FAST position.
CLOSE
OPEN
Figure 15. Choke Lever (Closed)
NOTICE
THROTTLE
LEVER
The CLOSED position of the choke lever enriches the
fuel mixture for starting a COLD engine. The OPEN
position provides the correct fuel mixture for normal
operation after starting, and for restarting a warm
engine.
FAST SLOW
Figure 13. Throttle Lever (1/3 Start Position)
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 19
STARTUP
5. Place the engine ON/OFF switch (Figure 16) in the
"ON" position.
CHOKE LEVER
OFF
ON
ENGINE SWITCH
Figure 16. Engine ON/OFF Switch (ON Position)
6. Grasp the starter grip (Figure 17) and slowly pull it
out. The resistance becomes the hardest at a certain
position, corresponding the compression point. Rewind
the rope a little from that point and pull out sharply.
OPEN
CLOSE
Figure 18. Choke Lever (Open)
9. Before the compactor is placed in to operation, run the
engine for several minutes. Check for fuel leaks, and
noises that would associate with a lose component.
10. If the sprinkling of water is required, place water valve
(Figure 19) in the ON position.
OFF
ON
STARTER GRIP
Figure 17. Starter Grip
Figure 19. Water Valve (ON)
11. To begin compacting, place the throttle lever (Figure 20)
in the “FAST” (RUN) position.
NOTICE
DO NOT pull the starter rope all the way to the end
DO NOT release the starter rope after pulling. Allow it
to rewind as soon as possible.
THROTTLE
LEVER
7. When engine starts, release the starter grip and allow
the rope to recoil.
8. If the choke lever was moved to the "CLOSED" position
to start the engine, gradually move it to the "OPEN"
position (Figure 18) as the engine warms up. If the
engine has not started repeat steps 1 through 6.
FAST SLOW
Figure 20. Throttle Lever (Fast/Run Position)
PAGE 20 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
OPERATION
OPERATION
CAUTION
ALWAYS follow all safety rules referenced
in the safety section of this manual before
operating compactor. Keep work area
clear of debris and other objects that
could cause damage to the compactor or
bodily injury.
1. Once the engine has started, move the engine throttle
lever quickly to the run position.
2. With the throttle lever in the run position, the engine
speed should be around 2,300 RPM, therefore
engaging the centrifugal clutch.
NOTICE
ALWAYS move the throttle lever quickly without
hesitation, because increasing the engine speed slowly
causes the clutch to slip.
STOPPING THE ENGINE
Normal Shutdown
1. Move the throttle lever to the "SLOW" (IDLE) position
(Figure 21) and run the engine for three minutes at
low speed.
THROTTLE
LEVER
RUN SLOW
Figure 21. Throttle Lever (Slow/Idle Position)
2. Place the engine ON/OFF switch (Figure 22) in the
"OFF" position.
3. Firmly gasp the compactor's handle bar with both
hands, the compactor will begin moving forward.
4. Slowly walk behind the compactor and be on the
lookout for any large objects or foreign matter that
might cause damage to the compactor or bodily injury.
OFF
NOTICE
ON
NEVER stop the engine suddenly while working at
high speeds.
5. Compactor traveling speed may drop on soils which
contain clay, however there may be cases where
traveling speed drops because the compaction plate
does not leave the ground surface easily due to the
composition of the soil. To rectify this problem do the
following:
ENGINE SWITCH
Figure 22. Engine ON/OFF Switch (OFF Position)
„„Check the bottom plate to see if clay or equivalent
material has been lodge in the plate mechanism. If so,
wash with water and remove.
„„Remember the compactor does not work as efficiently
on clay or soils that have a high moisture content level.
„„If the soil has a high moisture level, dry soil to appropriate
moisture content level or carry out compaction twice.
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 21
OPERATION
3. Place the fuel shut-off lever (Figure 23) in the "OFF"
position.
Compactor Storage
For storage of the plate compactor for over 30 days, the
following is required:
„„Drain the fuel tank completely, or add STA-BIL to the fuel.
FUEL VALVE
LEVER
OFF
ON
„„Run the engine until the gasoline in the carburetor is
completely consumed.
„„Completely drain the oil from the crankcase and refill
with fresh oil.
„„Remove the spark plug, pour 2 or 3 cc of SAE 30 oil into
the cylinder and crank slowly to distribute the oil.
Figure 23. Fuel Valve Lever (OFF)
„„Slowly rotate the engine a few times with the starter rope
and install a new plug.
4. If applicable place water valve (Figure 19) in the OFF
position.
„„Pull out the starter rope slowly and stop at the
compression point.
Emergency Shutdown
„„Clean all external parts of the plate compactor with a
cloth.
1. Move the throttle lever quickly to the "SLOW" (IDLE)
position, and place the engine ON/OFF switch in the
OFF position.
„„Cover the plate compactor and store in a clean, dry place.
PAGE 22 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
MAINTENANCE
MAINTENANCE
General Cleanliness
General maintenance practices are crucial to the
performance and longevity of your compactor. This
equipment requires routine cleaning, inspection and
lubrication. Reference Table 6 and Table 7 for scheduled
engine and compactor maintenance.
Clean the compactor daily. Remove all dust and debris
buildup (mud, clay etc.). If the compactor is steam-cleaned,
ensure that lubrication is accomplished AFTER steam
cleaning.
The following procedures, devoted to maintenance, can
prevent serious compactor damage or malfunctioning.
NOTICE
Reference HONDA engine manual supplied with your
compactor for more detailed engine maintenance and
troubleshooting.
CAUTION
NOTICE
Inspection and other services should always be carried
out on hard and level ground with the engine shutdown.
NOTICE
The inspection intervals listed in the maintenance tables
are for operation under normal conditions. Adjust your
inspection intervals based on the number hours plate
compactor is in use, and particular working conditions.
ALWAYS allow the engine to cool before
servicing. NEVER attempt any maintenance
work on a hot engine.
CAUTION
ALWAYS disconnect the spark plug wire from the spark
plug and secure away from the engine before performing
maintenance or adjustments on the machine.
WARNING
Some maintenance operations may
require the engine to be run. Ensure
that the maintenance area is well
ventilated. Gasoline engine exhaust
contains poisonous carbon monoxide
gas that can cause unconsciousness
and may result in DEATH
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 23
MAINTENANCE
Inspection and Maintenance Service Tables
To make sure your plate compactor is always in good
working condition before using, carry out the maintenance
inspection in accordance with Table 6 and Table 7.
Engine Maintenance
Perform engine maintance as listed in Table 6.
Description (3)
Engine Oil
Air Cleaner
All Nuts and
Bolts
Spark Plug
Cooling Fins
Spark Arrester
Fuel Tank
Fuel Filter
Idle Speed
Valve Clearance
Fuel lines
Operation
Table 6. Engine Maintenance Schedule
Every 6
Every 3
First
Before
Month or Months or Months or
50 hrs
25 hrs
10 hrs
X
X
X
X (1)
CHECK
CHANGE
CHECK
CHANGE
Re-tighten If
Necessary
CHECK-CLEAN
REPLACE
CHECK
CLEAN
CLEAN
CHECK
CHECK-ADJUST
CHECK-ADJUST
CHECK
Every
Year or
100 hrs
Every 2
Years or
200 hrs
X
X
X
X
X
X
X
X (2)
X (2)
Every 2 years (replace if necessary) (2)
1. Service more frequently when used in DUSTY areas.
2. These items should be serviced by your service dealer, unless you have the proper tools and are mechanically proficient.
Refer to the HONDA Shop Manual for service procedures.
3. For commercial use, log hours of operation to determine proper maintenance intervals.
PAGE 24 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
MAINTENANCE
Machine Inspection
Engine Air Cleaner
DANGER
Perfom machine inspection as listed in Table 7.
Table 7. Machine Inspection
Interval
Check
Solution
Machine
Clean if necessary.
Fuel Tank For Leaks
Repair fuel leaks.
Fuel System for Leaks
Repair fuel leaks.
Engine Oil
Add oil if necessary.
Vibrator Oil
Add oil if necessary.
Air Cleaner Element
Clean/Replace
Daily Before Starting
Cyclone Pre-Cleaner
Clean
Guard Frame
Inspect/deformations
Shock Absorber
Replace if damaged.
Engine Oil
Replace only after
first 20 hrs.
Engine Oil
Change
Every 20 Hours
Every 100
Air Cleaner Element
Clean/Replace
Vibrator Oil
Check oil level. Check
for leaks.
V-Belt
Inspect, replace if
damaged or worn.
Clutch
Inspect, replace if not
working properly.
Engine Bolts
Replace bolts
if deformed or
elongated.
Vibrator Oil
Change
Fuel Filter
Change
Fuel Lines
Replace
Every 200 hours
Every 300 hours
Every 2 years
DO NOT use gasoline or low flash point
solvents for cleaning the air cleaner. The
possibility exists of fire or explosion which
can cause damage to the equipment and
severe bodily harm or even DEATH!
CAUTION
Wear protective equipment such as
approved safety glasses or face shields
and dust masks or respirators when
cleaning air filters with compressed air.
Dual Filter Element Type
The Honda GX160UT2QMX2 engine is equipped with a
replaceable, high-density paper air cleaner element. See
(Figure 24) for air cleaner components.
1. Remove the air cleaner cover and foam filter element.
2. Tap the paper filter element several times on a hard
surface to remove dirt, or blow compressed air not
exceeding 30 psi (207 kPa, 2.1 kgf/cm2) through the
filter element from the inside out. NEVER brush off
dirt. Brushing will force dirt into the fibers. Replace the
paper filter element if it is excessively dirty.
BLOW COMPRESSED
AIR FROM THE
INSIDE OUT
Tightening Torque
Reference Table 8 below (Tightening Torque ), for retightening Table
of nuts
bolts. Torque (in. kg/cm Diameter)
8. and
Tightening
Material
6mm
8mm
10mm
12mm
14mm
16mm
18mm
20mm
4T
70
150
300
500
750
1,100
1,400
2,000
6-8T
100
250
500
800
1,300
2,000
2,700
3,800
11T
150
400
800
1,200
2,000
2,900
4,200
5,600
*
100 (6mm) 300 ~ 350 (8mm) 650 ~ 700 (10mm)
**
In case counter-part is of aluminum
Bolt threads used with this machine are all right handed
WING NUT
AIR CLEANER
COVER
PAPER FILTER
ELEMENT
FOAM FILTER
ELEMENT
GASKET
Material and quality of material is marked on each bolt, and screw.
Figure 24. Engine Air Filter (Dual)
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 25
MAINTENANCE
3. Clean foam element in warm, soapy water or
nonflammable solvent. Rinse and dry thoroughly. Dip
the element in clean engine oil and completely squeeze
out the excess oil from the element before installing.
Cyclone Dual Filter Element Type 1
Cyclone Dual Filter Element Type 2
The Honda GX160UT2QCM engine is equipped with a
replaceable, high-density paper air cleaner element. See
(Figure 26) for air cleaner components.
1. Follow steps 1 through 3 as outlined in the "Dual Filter
Element" section.
NOTICE
When reinstalling cyclone housing, be sure that the air
intake tab fits properly into the groove in the pre-cleaner
cap. Also make sure air guide is properly aligned before
inserting into pre-cleaner cap.
The Honda GX160UT2QMXC engine is equipped with a
replaceable, high-density paper air cleaner element. See
(Figure 25) for air cleaner components.
1. Follow steps 1 through 3 as outlined in the "Dual
Element" section.
WING NUT
AIR CLEANER
COVER
PAPER FILTER
ELEMENT
FOAM FILTER
ELEMENT
BLOW COMPRESSED
AIR FROM THE
INSIDE OUT
2. Next, remove the pan head screws (3) that secure the
cyclone housing to the pre-cleaner cap.
3. Remove the cyclone housing and wash the components
with water.
4. Thoroughly dry housing and associated components
and reassemble.
PRE-CLEANER
CAP
GROOVE
PAN-HEAD
SCREW (3)
AIR GUIDE
TAB
CYCLONE
HOUSING
WING NUT
GASKET
Figure 26. Engine Air Filter (Cyclone Type 2)
2. Blow compressed air through the air cleaner cover as
shown in. Clean inside of air filter cover with warm,
soapy water or nonflammable solvent. Rinse and dry
thoroughly.
AIR CLEANER
COVER
WING NUT
PAPER FILTER
ELEMENT
FOAM FILTER
ELEMENT
BLOW COMPRESSED
GASKET
Figure 27. Engine Air Filter Cover
NOTICE
Figure 25. Engine Air Filter (Cyclone Type1)
Operating the engine with loose or damaged air cleaner
components could allow unfiltered air into the engine
causing premature wear and failure.
PAGE 26 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
MAINTENANCE
Engine Oil
1. Drain the engine oil when the oil is warm as shown in
(Figure 28).
OIL FILLER
DIPSTICK
GAP: 0.024 - 0.028 in.
(0.6 - 0.7 mm.)
Figure 29. Spark Plug Gap
V-BELT
DRAIN
BOLT
SEALING
WASHER
Figure 28. Draining Engine Oil
2. Remove the oil drain bolt and sealing washer and allow
the oil to drain into a suitable container.
3. Replace engine oil with recommended type oil as listed
in Table 5. For engine oil capacity, see Table 2 (Engine
Specifications). DO NOT overfill.
Visually examine the V-belt (Figure 30) and determine if it
is full of tiny cracks, frayed, has pieces of rubber missing,
is peeling or otherwise damaged.
Also, examine the belt and determine if it is oil soaked or
"glazed " (hard shiny appearance on the sides of the belt).
Either of these two conditions can cause the belt to run hot,
which can weaken it and increase the danger of it breaking.
If the V-belt exhibits any of the above wear conditions
replace the V-belt immediately.
OIL SOAKED
4. Reinstall drain bolt with sealing washer and tighten
securely.
SPARK PLUG
NOTICE
NEVER use a spark plug of incorrect heat range.
GLAZED
1. Remove and clean spark plug (Figure 29) with a wire
brush if it is to be reused. Discard spark plug if the
insulator is cracked or chipped.
2. Using a feeler gauge adjust spark plug gap to 0.028
~0.031 inch (0.7~0.8 mm).
3. Thread spark plug into cylinder hole by hand to prevent
cross-threading, then tighten securely.
CORD FAILURE
WORN BACK
COVER
BROKEN
MISSING RUBBER
CRACKS
SIDEWALL
WEAR
Figure 30. V-Belt Inspection
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 27
MAINTENANCE
SPARK ARRESTER CLEANING
Clean the spark arrester every 6 months or 100 hours.
1. Remove the 4 mm screw (3) from the exhaust deflector,
then remove the deflector. See (Figure 31).
4. Carefully remove carbon deposits from the spark
arrester screen (Figure 32) with a wire brush.
WIRE BRUSH
2. Remove the 5 mm screw (4) from the muffler protector,
then remove the muffler protector.
3. Remove the 4 mm screw from the spark arrestor, then
remove the spark arrester.
SPARK ARRESTOR
SCREEN
4 MM
SCREW
PROTECTOR
4 MM
SCREW
Figure 32. Cleaning The Spark Arrester
5 MM
SCREW
5. If the spark arrester is damaged and has breaks or
holes, replace with a new one.
6. Reinstall the spark arrester and muffler protector in
reverse order of disassembly.
MUFFLER
5 MM
SCREW
SPARK
ARRESTOR
Figure 31. Spark Arrester Removal
PAGE 28 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
NOTES
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 29
EXPLANATION OF CODE IN REMARKS COLUMN
The following section explains the different symbols and
remarks used in the Parts section of this manual. Use the
help numbers found on the back page of the manual if there
are any questions.
NOTICE
The contents and part numbers listed in the parts
section are subject to change without notice. Multiquip
does not guarantee the availability of the parts listed.
SAMPLE PARTS LIST
NO.
1
2%
2%
3
4
PART NO. PART NAME
QTY. REMARKS
12345
BOLT .....................1 .....INCLUDES ITEMS W/%
WASHER, 1/4 IN. ..........NOT SOLD SEPARATELY
12347
WASHER, 3/8 IN. ..1 .....MQ-45T ONLY
12348
HOSE ..................A/R ...MAKE LOCALLY
12349
BEARING ..............1 .....S/N 2345B AND ABOVE
NO. Column
Unique Symbols — All items with same unique symbol
(@, #, +, %, or >) in the number column belong to the
same assembly or kit, which is indicated by a note in the
“Remarks” column.
Duplicate Item Numbers — Duplicate numbers indicate
multiple part numbers, which are in effect for the same
general item, such as different size saw blade guards in
use or a part that has been updated on newer versions
of the same machine.
NOTICE
When ordering a part that has more than one item
number listed, check the remarks column for help in
determining the proper part to order.
PART NO. Column
Numbers Used — Part numbers can be indicated by a
number, a blank entry, or TBD.
TBD (To Be Determined) is generally used to show a
part that has not been assigned a formal part number
at the time of publication.
A blank entry generally indicates that the item is not sold
separately or is not sold by Multiquip. Other entries will
be clarified in the “Remarks” Column.
QTY. Column
Numbers Used — Item quantity can be indicated by a
number, a blank entry, or A/R.
A/R (As Required) is generally used for hoses or other
parts that are sold in bulk and cut to length.
A blank entry generally indicates that the item is not sold
separately. Other entries will be clarified in the “Remarks”
Column.
REMARKS Column
Some of the most common notes found in the “Remarks”
Column are listed below. Other additional notes needed
to describe the item can also be shown.
Assembly/Kit — All items on the parts list with the
same unique symbol will be included when this item is
purchased.
Indicated by:
“INCLUDES ITEMS W/(unique symbol)”
Serial Number Break — Used to list an effective serial
number range where a particular part is used.
Indicated by:
“S/N XXXXX AND BELOW”
“S/N XXXX AND ABOVE”
“S/N XXXX TO S/N XXX”
Specific Model Number Use — Indicates that the part
is used only with the specific model number or model
number variant listed. It can also be used to show a
part is NOT used on a specific model or model number
variant.
Indicated by:
“XXXXX ONLY”
“NOT USED ON XXXX”
“Make/Obtain Locally” — Indicates that the part can
be purchased at any hardware shop or made out of
available items. Examples include battery cables, shims,
and certain washers and nuts.
“Not Sold Separately” — Indicates that an item cannot
be purchased as a separate item and is either part of an
assembly/kit that can be purchased, or is not available
for sale through Multiquip.
PAGE 30 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
SUGGESTED SPARE PARTS
MVC88VTH/MVC88VTWH PLATE COMPACTOR WITH
HONDA GX160UT2QMX2/GX160UT2QMXC/GX160UT2QCM GASOLINE ENGINES
1 to 5 units
Qty.P/N
Description
3............070100332.............V-BELT, RPF3330
5♦◊........0650140480...........SPARK PLUG, EY45V
5◗...........9807956846...........SPARK PLUG, BPR6ES
1............28462ZH8003........ROPE, RECOIL STARTER
5♦◊........17210ZE1517........ELEMENT, AIR CLEANER
5◗...........17210Z0V781........ELEMENT, AIR CLEANER
1♦..........17620Z4H030........CAP COMPLETE, FUEL TANK
1◊◗........17620Z4H900........CAP COMPLETE, FUEL TANK
1............17672Z4H000........FUEL FILTER, FUEL TANK
4............939010230.............SHOCK ABSORBER
NOTICE
♦ GX160UT2QMX2
◊ GX160UT2QMXC
◗ GX160UT2QCM
NOTICE
Part numbers on this Suggested Spare Parts list may
supersede/replace the part numbers shown in the
following parts lists.
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 31
BODY ASSY.
S/N B1001 ~ B6084, S/N C6085 ~ C9999,
S/N C1001 ~ C1152, S/N C1253 ~ C1471
53 51
S/N C1153 ~ C1252,
S/N C1472 AND ABOVE
53
52
54
57
45
52
57
66
43
A
51
54
63
62
45
43
1
60
42
44
59
61
41
37
38
39
35
38
39
36
34
32
31
33
56
55
31 32
(EG)
57
9
34
58
35
10
11
12
19
7
6
18-4
15 16
29
26
6 27
28
5
8
13
4
18-5 18-1
18-2
24
18-3
23
20
7
2
64
65
36
18
21
22
26
27
28
17
14
26
27
28
3
25
NOTE:
3
4
2
ITEMS 59 THROUGH 63 NOT REQUIRED
1 WHEN HONDA GX160UT2QMXC
ENGINE INSTALLED (S/N A9198 ~ A9999,
S/N A1001 ~ A3342, S/N B1001 ~ B6084,
S/N C6085 ~ C9999, S/N C1001 ~ C1152,
S/N C1253 ~ C1471).
PAGE 32 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
BODY ASSY.
NO. PART NO.
PART NAME
QTY.
REMARKS
A
416910120
HANDLE ASSY...................................................1................INCLUDES ITEMS W/%
2
939010230
SHOCK ABSORBER
4
3
020310080
NUT M10
4
4
030210250
WASHER, LOCK M10
4
5416120390 BASE
1
6
001221025
BOLT 10X25
4
7
030210250
WASHER, LOCK M10
4
8
416454360
RUBBER PLATE 25X25X8
1
9
912216015
ENGINE ASSY.,GX160UT2QMX2......................1................S/N A9197 AND BELOW
9
912216021
ENGINE ASSY.,GX160UT2QMXC.....................1................S/N A9198 ~ A9999
S/N A1001 ~ A3342
S/N B1001 ~ B6084
S/N C6085 ~ C9999
S/N C1001 ~ C1152
S/N C1253 ~ C1471
9
912216025
ENGINE ASSY.,GX160UT2QCM..........................................S/N C1153 ~ C1252
S/N C1472 AND ABOVE
10
001220850
BOLT 8X50
4
11
030208200
WASHER, LOCK M8
4
12
031108160
WASHER, FLAT M8
4
13
416466520
ENGINE NUT
1
14
416466540
ENGINE NUT
1
15
031108160
WASHER, FLAT M8
1
16
022710809
NYLON NUT M8
1
17
959404350
EARTH WIRE, 1"
1
18
416910100
CLUTCH ASSY
1
18-1 416464490
CLUTCH DRUM, 1"
1
18-2 416351320
CLUTCH SHOE AND BOSS ASSY.
1
18-3 080200300
STOP RING, S30
1
18-4 080600550
STOP RING, AR55
1
18-5 042006006
BEARING 6006 1
19
90745ZE1600
KEY 4.78X4.78X38
1
20416452809 COLLAR
1
21
952400130
WASHER 1
22
009110004
SOCKET HEAD BOLT 5/16"
1
23
070100332
V-BELT RPF3330 1
24
416120950
BELT COVER, INNER
1
25
416010040
BELT COVER, OUTER
1
26
001220825
BOLT 8X25
4
27
030208200
WASHER, LOCK M8
5
28
031108160
WASHER, FLAT M8
5
29
001220820
BOLT 8X20
1
31
952408710
COLLAR 13X20X44
2
32
404433430
RUBBER 20X32X28
2
33
416452360
HANDLE STOPPER
2
34
952405600
WASHER 12.5X35X4.5
2
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 33
BODY ASSY. (CONTINUED)
S/N B1001 ~ B6084, S/N C6085 ~ C9999,
S/N C1001 ~ C1152, S/N C1253 ~ C1471
53 51
S/N C1153 ~ C1252,
S/N C1472 AND ABOVE
53
52
54
57
45
52
57
66
43
A
51
54
63
62
45
43
1
60
42
44
59
61
41
37
38
39
35
38
39
36
34
32
31
33
56
55
31 32
(EG)
57
9
34
58
35
10
11
12
19
7
6
18-4
15 16
29
26
6 27
28
5
8
2
4
18-5 18-1
18-2
24
18-3
23
20
7
13
64
65
36
18
21
22
26
27
28
17
14
26
27
28
3
25
NOTE:
3
4
2
ITEMS 59 THROUGH 63 NOT REQUIRED
1 WHEN HONDA GX160UT2QMXC
ENGINE INSTALLED (S/N A9198 ~ A9999,
S/N A1001 ~ A3342, S/N B1001 ~ B6084,
S/N C6085 ~ C9999, S/N C1001 ~ C1152,
S/N C1253 ~ C1471).
PAGE 34 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
BODY ASSY. (CONTINUED)
NO. PART NO.
PART NAME
QTY.
REMARKS
35
001221253
BOLT 12X65
2
36
030212300
WASHER, LOCK M12 2
37
416121050
GUARD HOOK...................................................1................S/N A9197 AND BELOW
37
416121740
GUARD HOOK...................................................1................S/N A9198 ~ A9999
S/N A1001 ~ A3342
S/N B1001 ~ B6084
S/N C6085 ~ C9999
S/N C1001 ~ C1152
S/N C1253 ~ C1471
37
416121051
GUARD HOOK...................................................1................S/N C1153 ~ C1252
S/N C1472 AND ABOVE
38
0105091025
BOLT 10X25
4
39
030210250
WASHER, LOCK M10
4
41% 416121010
VAS HANDLE BODY
1
42% 416218770
GRIP, VAS HANDLE
1
43% 416459320
HANDLE NUT, VAS HANDLE
2
44% 416459340
RUBBER, VAS HANDLE
2
45% 009120407
SUNK HEAD BOLT 10X20
2
51
955010311
TACH/HOUR METER
1
52
001220510
BOLT 5X10.........................................................2................S/N B1001 ~ B6084
S/N C6085 ~ C9999
S/N C1001 ~ C1152
S/N C1253 ~ C1471
52
009110101
PAN HEAD SCREW 5X25..................................2................S/N C1153 ~ C1252
S/N C1472 AND ABOVE
53
030205130
WASHER, LOCK M5
2
54
58151
WASHER, FLAT M5............................................2................S/N B1001 ~ B6084
S/N C6085 ~ C9999
S/N C1001 ~ C1152
S/N C1253 ~ C1471
54
020305040
NUT, M5..............................................................2................S/N C1153 ~ C1252
S/N C1472 AND ABOVE
55
959026822
RUBBER TUBE
1
56
955010310
CURL CORD
1
57507010110 CLAMP................................................................3................S/N B1001 ~ B6084
S/N C6085 ~ C9999
S/N C1001 ~ C1152
S/N C1253 ~ C1471
57507010110 CLAMP................................................................2................S/N C1153 ~ C1252
S/N C1472 AND ABOVE
58
955010307
CLIP BELT
1
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 35
BODY ASSY. (CONTINUED)
S/N B1001 ~ B6084, S/N C6085 ~ C9999,
S/N C1001 ~ C1152, S/N C1253 ~ C1471
53 51
S/N C1153 ~ C1252,
S/N C1472 AND ABOVE
53
52
54
57
45
52
57
66
43
A
51
54
63
62
45
43
1
60
42
44
59
61
41
37
38
39
35
38
39
36
34
32
31
33
56
31 32
(EG)
57
55
9
34
58
35
10
11
12
19
7
6
18-4
15 16
29
26
6 27
28
5
8
2
4
18-5 18-1
18-2
24
18-3
23
20
7
13
64
65
36
18
21
22
26
27
28
17
14
26
27
28
3
25
NOTE:
3
4
2
ITEMS 59 THROUGH 63 NOT REQUIRED
1 WHEN HONDA GX160UT2QMXC
ENGINE INSTALLED (S/N A9198 ~ A9999,
S/N A1001 ~ A3342, S/N B1001 ~ B6084,
S/N C6085 ~ C9999, S/N C1001 ~ C1152,
S/N C1253 ~ C1471).
PAGE 36 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
BODY ASSY. (CONTINUED)
NO. PART NO.
PART NAME
QTY.
REMARKS
59
952404470
WASHER, FLAT M6............................................1................S/N A9197 AND BELOW
60
0105050616
BOLT 6X15.........................................................1................S/N A9197 AND BELOW
61
030206150
WASHER, LOCK M6..........................................1................S/N A9197 AND BELOW
62
020106050
NUT M6...............................................................1................S/N A9197 AND BELOW
63
2067550101
CLAMP COMPLETE...........................................1................S/N A9197 AND BELOW
64
001221215
BOLT 12X15
2
65
031112230
WASHER, FLAT M12
2
66
952409910
COLLAR 6.5X10.5X12.7.....................................2................S/N C1153 ~ C1252
S/N C1472 AND ABOVE
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 37
VIBRATOR PLATE/CASE ASSY.
23
PAGE 38 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
VIBRATOR PLATE/CASE ASSY.
NO. PART NO.
1-A 416910150
2#
953405270
3#
953405260
8#
416218390
9#
040406211
10# 416338909
11# 416338919
12# 416349930
13# 060403060
14#050101000
15# 014208020
16# 030208200
18# 416464470
19# 951405240
20# 952404250
21# 0105091025
22# 030210250
23# 416120141
PART NAME
QTY.
REMARKS
VIBRATING PLATE/CASE ASSY........................1................INCLUDES ITEMS W/#
PLUG 1/4X14 X13L
1
PACKING 1/4"
1
ECCENTRIC ROTATOR
1
BEARING 6211C4
2
CASE COVER (R)
1
CASE COVER (L)
1
BELT COVER GUARD
1
OIL SEAL, TC35488
1
O-RING
2
BOLT 8X20 8
WASHER, LOCK M8
8
PULLEY, VIBRATOR ASSY.
1
KEY 7X7X19 1
WASHER 11X40X4 1
BOLT 10X25
1
WASHER, LOCK M10
1
VIBRATING PLATE
1
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 39
TRANSPORT WHEEL ASSY. (OPTION)
59
58
61
62
61
70
55
20
63
57
72
71
56
22
31
21
51
31
50
32
32
41
33
42
48
47
45
52
53
39
34
43
44
37
38
36
36
36
35
PAGE 40 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
TRANSPORT WHEEL ASSY. (OPTION)
NO. PART NO.
20
0105050616
21
030206150
22
020106050
31
012010030
32
030210250
33
416466680
34
416352490
35
012210035
36
031110160
37
032110180
38
020310080
39
020310080
41
416218830
41
416219520
41
416218830
42959301000
43952400130
44
020108060
45
030208200
47
939010270
48
020108060
50
416467230
51
011206020
52
030206150
53
020106050
55
416351700
56
416466690
57458450880
58
416467240
59
025403016
61
952408960
62
952408980
63
419466670
70
011606025
71
030206150
72
020106050
PART NAME
QTY.
REMARKS
BOLT 6X15
1
WASHER, LOCK M6
1
NUT M6
1
BOLT 10X30
4
WASHER, LOCK M10
4
SPACER, WHEEL
1
BRACKET, WHEEL
1
BOLT 10X35
2
WASHER, FLAT M10
6
CONICAL LOCK WASHER
4
NUT M10
2
NUT M10
2
AXLE, TRANSPORT WHEEL, WHL88T.............1................S/N A9197 ~ BELOW
AXLE, TRANSPORT WHEEL, WHL88TC..........1................S/N AND A9198 ~ C1471
AXLE, TRANSPORT WHEEL, WHL88T.............1................S/N C1472 AND ABOVE
WHEEL
2
SPACER
2
NUT M8
2
WASHER, LOCK M8
2
STOPPER RUBBER
1
NUT M8
1
STOPPER, LOCK PIN
1
BOLT 6X20
2
WASHER, LOCK M6
2
NUT M6
2
LOCK BRACKET, WHEEL
1
LOCK PIN, WHEEL
1
SPRING
1
LOCK KNOB, WHEEL
1
SPRING PIN 3X16
1
WASHER, FLAT 6.5X16X1
2
COLLAR 6.2X9X4
1
LOCK WIRE, HANDLE
1
BOLT 6X25
1
WASHER, LOCK M6
1
NUT M6
1
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 41
SPRINKLER ASSY.
11
12
10
A
12
13
1
2
3
8
5
7
9
4
6
7
PAGE 42 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
SPRINKLER ASSY.
NO.
A
1
2
3
4
5
6
7
8
9
10%
11%
12%
13%
PART NO.
416910110
033910050
953406390
954403241
416338930
416338940
416452750
001220825
0401450080
416452790
954300342
001241030
033910160
022910270
PART NAME
QTY.
REMARKS
WATER TANK W/CAP.........................................1................INCLUDES ITEMS W/%
WASHER 14.5X30X1.6
1
PACKING 13X28X2
1
COCK PT 1/4"
1
SPRINKLING PIPE
1
PIPE HOLDER (L)
1
PIPE HOLDER (R)
1
BOLT 8X25
2
WASHER, FLAT M8
1
STAY, PIPE HOLDER
1
CAP, WATER TANK
1
BOLT 10X30
1
WASHER, FLAT M10
2
NUT M10
1
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 43
URETHANE PLATE ASSY. (OPTION)
1
2
3
6
4
7
5
PAGE 44 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
URETHANE PLATE ASSY. (OPTION)
NO.
1
2
3
4
5
6
7
PART NO.
416352080 001221230 012012030
416352090 011208035
022710809 PADUPA88
PART NAME
QTY.
REMARKS
HANGER, URETHANE PLATE
1
BOLT 12X30
2
WASHER, LOCK M12
2
PLATE, URETHANE PLATE
1
BOLT 8X35 4
NYLON NUT M8 4
PAD, URETHANE...............................................1................REPLACES P/N 416342390
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 45
NAMEPLATE AND DECALS ASSY.
B
1
19
18
3
14
4
16
11
20
A
21
15
C
2
17
A
C
B
PAGE 46 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
NAMEPLATE AND DECALS ASSY.
NO.
1
2
3
4
11
11
14
15
16
17
18
19
20
21
PART NO.
920218170
920900090
920101410
920105070
920217430
920217440
920210330
920208350
920203290
920203060
920206290
920201580
920214100
920212320
PART NAME
QTY.
REMARKS
DECAL, POSITION
1
DECAL, SET.......................................................1................ SET ONLY
DECAL, MIKASA MARK 120X60
1
DECAL, MIKASA MARK 125MM
1
PLATE, SERIAL NO./88VTH
1
PLATE, SERIAL NO./88VTHW
1
DECAL, EC NOISE REQ.LWA105
1
DECAL, V-BELT RPF3330
1
DECAL, CAUTION
1
DECAL, CAUTION
1
DECAL, CAUTION (MANUAL/EXP)
1
DECAL, MQ MARK 71X55
1
DECAL, E/G FIRE WARNING
1
DECAL, FUEL CAUTION
1
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 47
HONDA GX160UT2 SERIES ENG. — CYLINDER HEAD ASSY.
15
12
12
5
14
10
6
3
2
7
13
13
14
14
10
1
4
14
11
16
10
8
11
16
PAGE 48 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
HONDA GX160UT2 SERIES ENG. — CYLINDER HEAD ASSY.
NO.
1%
2%
3
4$%
5
6♦
6◊◗
7
8♦
8◊
8◗
10
11
12
13
14
15♦◊
15◗
16◊
PART NO.
12204ZE1306
12205ZE1315
12210Z4M405
12216ZE5300
12251ZL0003
12310Z4M000
12310Z4M840
12391ZE1000
15721ZH8000
15721ZH1840
15721ZE1840
90013883000
90043ZE1020
90047ZE1000
9430110160
957010806000
0650140480
9807956846
9500280000
PART NAME
QTY.
REMARKS
GUIDE, INLET VALVE (O.S.)
1
GUIDE, EXHAUST VALVE (O. S.).......................1................INCLUDES ITEM W/$
HEAD COMPLETE, CYLINDER.........................1................INCLUDES ITEMS W/%
CLIP, VALVE GUIDE
1
GASKET, CYLINDER HEAD
1
COVER COMPLETE, HEAD
1
COVER COMPLETE, HEAD
1
PACKING, HEAD COVER
1
TUBE, BREATHER
1
TUBE, BREATHER
1
TUBE, BREATHER
1
FLANGE BOLT 6X12
4
STUD BOLT 6X112
2
STUD BOLT 8X32
2
KNOCK PIN 10X16
2
BOLT, FLANGE 8X60
4
SPARK PLUG, EY45V
1
SPARK PLUG, BPR6ES.....................................1................REPLACES P/N 9807956876
CLIP, TUBE
2
NOTICE
♦ GX160UT2QMX2
◊ GX160UT2QMXC
◗ GX160UT2QCM
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 49
HONDA GX160UT2 SERIES ENG. — CYL. BARREL ASSY.
4
7
6
12
17
4
5
15
3
6
19
19
16
21
17
18
13
11
9
8
14
11
9
1
PAGE 50 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
HONDA GX160UT2 SERIES ENG. — CYL. BARREL ASSY.
NO.
1♦
1◊◗
3
4%
5%
6%
7
8
9
11
12
13$
14$
15
16
17
18
19
21
PART NO.
12000Z4M406
12000Z4M416
16510Z4M000
16511Z4M000
16512Z4M000
16513ZE1000
16531Z4M000
16541Z4M000
90131ZE1000
90601ZE1000
90602ZE1000
91001ZF1003
91201Z0T801
91353671003
9405010000
9410106800
9425108000
957010601200
35480Z0T003
PART NAME
QTY.
REMARKS
BARREL, ASSY CYLINDER (OIL ALERT).........1................INCLUDES ITEMS W/$
BARREL, ASSY CYLINDER (OIL ALERT).........1................INCLUDES ITEMS W/$
GOVERNOR ASSY.............................................1................INCLUDES ITEMS W/%
WEIGHT, GOVERNOR
2
HOLDER, GOVERNOR WEIGHT
1
PIN, GOVERNOR WEIGHT
2
SLIDER, GOVERNOR
1
SHAFT, GOVERNOR ARM
1
BOLT, DRAIN PLUG
2
WASHER, DRAIN PLUG
2
CLIP, GOVERNOR HOLDER
1
BALL BEARING 6205
1
OIL SEAL 25X41X6
1
O-RING 14MM....................................................1................REPLACES P/N 91353671004
FLANGE NUT M10
1
WASHER, FLAT 6MM
2
LOCK PIN 8MM
1
FLANGE BOLT 6X12
2
SWITCH ASSY., OIL LEVEL
1
NOTICE
♦ GX160UT2QMX2
◊ GX160UT2QMXC
◗ GX160UT2QCM
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 51
HONDA GX160UT2 SERIES ENG. — CRANKCASE COVER ASSY.
9
9
9
9
4
6
9
8
8
7
10
11
5
3
2
PAGE 52 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
HONDA GX160UT2 SERIES ENG. — CRANKCASE COVER ASSY.
NO.
2
3
4
5
6$
7#
8
9
10#
11%
PART NO.
11300Z4M640
11381ZH8801
15600Z0T810
15600Z0T820
15625Z0T800
91201Z0T801
9430108140
957010803200
961006205010
15625Z0T800
PART NAME
QTY.
REMARKS
COVER, ASSY., CRANKCASE...........................1................INCLUDES ITEMS W/#
GASKET, CRANKCASE
1
CAP ASSY., OIL FILLER....................................1................INCLUDES ITEMS W/$
CAP ASSY., OIL FILLER....................................1................INCLUDES ITEMS W/%
PACKING, OIL FILLER CAP
1
OIL SEAL 25X41X6
1
KNOCK PIN 8X14
2
FLANGE BOLT 8X32
6
BALL BEARING 6205.........................................1................REPLACES P/N 961006205000
PACKING, OIL FILLER CAP
1
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 53
HONDA GX160UT2 SERIES ENG. — CRANKSHAFT ASSY.
8
1
PAGE 54 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
HONDA GX160UT2 SERIES ENG. — CRANKSHAFT ASSY.
NO.
1
8
PART NO.
13310Z4M800
90745ZE1600
PART NAME
CRANK SHAFT COMPLETE
KEY 4.78X4.78X38
QTY.
1
1
REMARKS
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 55
HONDA GX160UT2 SERIES ENGINE — PISTON ASSY.
4
5
1
6
2
5
3
6
PAGE 56 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
HONDA GX160UT2 SERIES ENGINE — PISTON ASSY.
NO.
1
1◊◗
1◊◗
2
2◊◗
2◊◗
3
4♦
4◊◗
5$
6
PART NO.
13010Z4M801
13011Z4M003
13012Z4M003
13101Z4M800
13102Z4M800
13103Z4M800
13111Z4M000
13200Z4M000
13200Z0T900
90001Z4M000
90551ZE1000
PART NAME
QTY.
REMARKS
RING SET, PISTON (STD)
1
RING SET, PISTON 0.25
1
RING SET, PISTON 0.50
1
PISTON (STD)
1
PISTON 0.25
1
PISTON 0.50
1
PIN, PISTON
1
ROD ASSY., CONNECTING...............................1................INCLUDES ITEM W$
ROD ASSY., CONNECTING...............................1................INCLUDES ITEM W$
BOLT, CONNECTING ROD 6X34.5
2
CLIP, PISTON PIN 18MM
2
NOTICE
♦ GX160UT2QMX2
◊ GX160UT2QMXC
◗ GX160UT2QCM
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 57
HONDA GX160UT2 SERIES ENG. — CAMSHAFT ASSY.
12
2
9
10
7
11
4
4
16
15
10
8
1
5
3
6
3
15
16
6
5
14
PAGE 58 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
HONDA GX160UT2 SERIES ENG. — CAMSHAFT ASSY.
NO.
1
2
3♦◊
3◗
4
5
6♦
6◊◗
7$
8
9
10
11♦
11◊◗
12♦
12◊◗
14
15
16
PART NO.
12209Z4M801
14100Z4M000
14110Z4M000
14410Z4M000
14431ZE1000
14441ZE1010
14451ZE1013
14451Z4M000
14568ZE1000
14711Z4M000
14721Z4M000
14751ZF1000
14771ZE1000
14771Z0T900
14773ZE1000
14771Z0T900
14791Z4M000
90012ZE0010
90206ZE1000
PART NAME
QTY.
REMARKS
SEAL, VALVE STEM
1
CAMSHAFT ASSY..............................................1................INCLUDES ITEM W/$
ROD, COMPLETE, PUSH
2
ROD COMPLETE, PUSH
2
ARM, VALVE ROCKER
2
VALVE LIFTER
2
PIVOT, ROCKER ARM
2
PIVOT, ROCKER ARM
2
SPRING, WEIGHT RETURN
1
VALVE, INTAKE
1
VALVE, EXHAUST
1
SPRING, VALVE
2
RETAINER, INTAKE VALVE
1
RETAINER, INTAKE VALVE
1
RETAINER, EXHAUST VALVE
1
RETAINER, EXHAUST VALVE
1
PLATE, PUSH ROD GUIDE
1
BOLT, PIVOT, 8MM
2
NUT, PIVOT ADJUSTING
2
NOTICE
♦ GX160UT2QMX2
◊ GX160UT2QMXC
◗ GX160UT2QCM
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 59
HONDA GX160UT2 SERIES ENG. — RECOIL STARTER ASSY.
1
12
5
9
7
4
3
8
6
2
16
15
9
4
11
13
PAGE 60 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
HONDA GX160UT2 SERIES ENG. — RECOIL STARTER ASSY.
NO.
1♦◊
1◗
2$
3$♦◊
3$◗
4$♦◊
4$◗
5$
6$♦◊
6$◗
7$
8$
9$♦◊
9$◗
11$
12$
13♦
13◊◗
15$
16$
PART NO.
28400Z4M305ZD
28400Z4M306ZC
28410Z4M003ZD
28421Z0T003
28421Z1T702
28422ZH8801
28422Z1T701
28431ZH8801
28433ZH8801
28433Z1T702
28441ZH8801
28442ZH8003
28443ZH8801
28443Z1T701
28462ZH8003
90003ZH8801
90008ZE2003
957010600800
28461Z4M305
28463Z4M003
PART NAME
QTY.
REMARKS
STARTER ASSY., RECOIL.................................1................INCLUDES ITEMS W/$
STARTER ASSY., RECOIL.................................1................INCLUDES ITEMS W/$
CASE COMPLETE, RECOIL STARTER
1
REEL, RECOIL STARTER
1
REEL, RECOIL STARTER
1
RATCHET, STARTER
2
RATCHET, STARTER
2
PLATE, FRICTION
1
RATCHET GUIDE
1
RATCHET GUIDE
1
FRICTION SPRING
1
SPRING, RECOIL STARTER
1
SPRING, RETURN
2
SPRING, RETURN
2
ROPE, RECOIL STARTER
1
SET SCREW
1
BOLT, FLANGE 6X10
3
BOLT, FLANGE 6X8
3
KNOB, RECOIL STARTER
1
KNOB, REINFORCEMENT
1
NOTICE
♦ GX160UT2QMX2
◊ GX160UT2QMXC
◗ GX160UT2QCM
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 61
HONDA GX160UT2 SERIES ENG. — FAN COVER ASSY.
10
18
17
4
12
16
8
15
15
15
15
1
PAGE 62 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
HONDA GX160UT2 SERIES ENG. — FAN COVER ASSY.
NO.
1
4
8♦◊
8◗
10♦
10◊◗
12♦◊
12◗
15
16
17
18
PART NO.
19610Z4M000ZB
19611Z4M810
19630Z4M000
19630Z4M010
34150ZH7013
34150ZH7023
35120Z0T851
35120Z0T831
90013883000
90022888010
90601ZH7013
957010600800
PART NAME
QTY.
COVER COMPLETE, FAN
1
PLATE COMPLETE, SIDE (OIL ALERT) 1
SHROUD COMPLETE
1
SHROUD COMPLETE
1
ALERT UNIT, OIL
1
ALERT UNIT, OIL
1
SWITCH ASSY., E/G STOP
1
SWITCH ASSY., E/G STOP
1
FLANGE BOLT 6X12
6
FLANGE BOLT 6X20
1
CLIP, HARNESS
1
FLANGE BOLT 6X8
1
REMARKS
NOTICE
♦ GX160UT2QMX2
◊ GX160UT2QMXC
◗ GX160UT2QCM
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 63
HONDA GX160UT2 SERIES ENG. — CARBURETOR ASSY.
15
18
25
30
1
21
22
20
14
26
1
23
11
43
17
6
10
1
13
24
12
29
1
9
2
16
3
1
GASKET SET
4
8
1
1
7
NOTICE
Gasket set, item 1 included with items 4, 7, 8, 13, 23
and 30.
PAGE 64 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
HONDA GX160UT2 SERIES ENG. — CARBURETOR ASSY.
NO.
PART NO.
PART NAME
QTY.
REMARKS
1#♣❉% 16010ZE1812
GASKET SET
1
2#♣❉
16011ZE0005
FLOAT VALVE SET
1
3#♣❉
16013Z0SB01
FLOAT SET
1
4#♣❉
16015Z4M911
CHAMBER SET, FLOAT.................................1............INCLUDES ITEM W/%, &
6#♣❉
16016ZH7W01
SCREW SET, PILOT
1
7#♣❉& 16024Z5T901
SCREW SET, DRAIN.....................................1............INCLUDES ITEM W/%
8#♣❉
16028Z5T901
SCREW SET..................................................1............INCLUDES ITEM W/%
9#♣❉
16044Z4M911
CHOKE SET
1
10♦
16100Z4M911
CARBURETOR ASSY., (QMX2).....................1............INCLUDES ITEMS W/#
10◊
16100Z4MV22
CARBURETOR ASSY., (QMXC)....................1............INCLUDES ITEMS W/♣
10◗
16100Z4M781
CARBURETOR ASSY., (QCM).......................1............INCLUDES ITEMS W/❉
11#♣❉ 16124ZE0005
SCREW, THROTTLE STOP
1
12#♦
16166Z4M911
NOZZLE, MAIN
1
12♣◊
16166Z4MV21
NOZZLE, MAIN
1
12❉◗
16166Z4M781
NOZZLE, MAIN
1
13#♣❉ 16955283000
PACKING, CUP..............................................1............INCLUDES ITEM W/%
REPLACES P/N 16173001004
14
16211Z4M000
INSULATOR, CARBURETOR
1
15
16212ZH8800
PACKING, INSULATOR
1
16
16220ZE1020
SPACER COMPLETE, CARBURETOR
1
17
16221ZH8801
PACKING, CARBURETOR
1
18
16610ZE1000
CHOKE LEVER COMPLETE.........................1............INCLUDES ITEM W/$
20#♣❉ 16953ZE1812
LEVER, COCK
1
21#♣❉ 16954ZE1812
PLATE, LEVER SETTING
1
22#♣❉ 16956ZE1811
SPRING, COCK LEVER
1
23#♣❉ 16957ZE1812
PACKING, FUEL COCK.................................1............INCLUDES ITEM W/%
24#♣❉ 16967ZE0811
CUP, FUEL STRAINER
1
25#♣❉ 93500030060H
SCREW 3X6 2
26$
9430520122
SPRING PIN 2X12
1
29#♣♦◊ 99101ZH80700
MAIN JET #70
1
29❉◗
99101ZH80720
MAIN JET #72
1
30#♦
99204ZE00350
PILOT, JET SET #35......................................1............INCLUDES ITEM W/%
30♣◊
99204ZE00380
PILOT, JET SET #38......................................1............INCLUDES ITEM W/%
30❉◗
99204ZE20400
PILOT, JET SET #40......................................1............INCLUDES ITEM W/%
43#♣❉ 16959Z5T901
FILTER, CUP
1
NOTICE
♦ GX160UT2QMX2
◊ GX160UT2QMXC
◗ GX160UT2QCM
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 65
HONDA GX160UT2QMX2 — AIR CLEANER ASSY.
13
4
2
1
12
10
5
3
8
9
6
7
7
11
11
PAGE 66 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
HONDA GX160UT2QMX2 — AIR CLEANER ASSY.
NO.
1
2
3#
4
5#
6
7%
8%
9
10
11
12
13
PART NO.
16271ZE1000
17210ZE1517
17218ZE1507
17231Z4M010
17232891000
17235Z4M830
17238ZE7010
17239ZE1000
17410Z4M000
90325044000
9405006000
957010602000
90300Z1V000
PART NAME
QTY.
REMARKS
PACKING, ELBOW
1
ELEMENT, AIR CLEANER.................................1................INCLUDES ITEMS W/#
OUTER ELEMENT
1
COVER, AIR CLEANER 1
GROMMET, AIR CLEANER
1
NOSE, SILENCER
1
COLLAR, AIR CLEANER 2
COLLAR (B), AIR CLEANER
1
ELBOW COMPLETE, AIR CLEANER................1................INCLUDES ITEMS W/%
NUT, TOOL BOX SETTING
1
FLANGE NUT 6MM
2
FLANGE BOLT 6X20
1
NUT, AIR CLEANER
1
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 67
HONDA GX160UT2QMXC ENGINE — AIR CLEANER ASSY.
PAGE 68 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
HONDA GX160UT2QMXC ENGINE — AIR CLEANER ASSY.
NO.
1
2
3$
4%
5
6$
7%
8%
9
10
11
12
13
14
15
16
17
PART NO.
16271ZE1000
17210ZE1517
17218ZE1507
17219733010
17230ZE1841
17232891000
17238ZE7010
17239733000
17410ZE1840
17470ZE1842
17475ZE1841
17476ZE1841
17478ZE1841
90300GB0900
90325044000
9405006000
957010602000
PART NAME
QTY.
REMARKS
PACKING, ELBOW 1
ELEMENT, AIR CLEANER.................................1................INCLUDES ITEMS W/$
FILTER, OUTER ELEMENT
1
PACKING, AIR CLEANER COVER
1
COVER, AIR CLEANER
1
GROMMET, AIR CLEANER
1
COLLAR, AIR CLEANER
2
COLLAR B, AIR CLEANER
1
ELBOW COMPLETE, AIR CLEANER................1................INCLUDES ITEMS W/%
CASE, PRE AIR CLEANER
1
CAP, PRE AIR CLEANER
1
GUIDE, PRE AIR CLEANER
1
PLATE, PRE AIR CLEANER
1
BOLT, MUD GUARD
5
NUT, TOOL BOX SETTING
2
NUT, FLANGE, 6MM
2
BOLT, FLANGE, 6X20
1
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 69
HONDA GX160UT2QCM ENGINE — AIR CLEANER ASSY.
1
13
10
5
4
11
8
6
9
2
3
7
7
12 12
PAGE 70 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
HONDA GX160UT2QCM ENGINE — AIR CLEANER ASSY.
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
PART NO.
16271ZE1000
17210Z0V781
17218Z0V780
17230Z0V780
17232891000
17233Z0V780
17238ZE7010
17239ZE3840
17410Z0V780
90300Z4M800
90325044000
9405006000
957010602000
PART NAME
PACKING, ELBOW ELEMENT, AIR CLEANER
FILTER, OUTER
COVER ASSY., AIR CLEANER
GROMMET, AIR CLEANER
SEAL, AIR CLEANER COVER
COLLAR, AIR CLEANER
COLLAR B, AIR CLEANER
ELBOW COMPLETE, AIR CLEANER
NUT, AIR CLEANER
NUT, TOOL BOX SETTING
FLANGE NUT 6MM
FLANGE BOLT 6X20
QTY.
1
1
1
1
1
1
2
1
1
1
1
2
1
REMARKS
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 71
HONDA GX160UT2 SERIES ENGINE — MUFFLER ASSY.
14
14
3
6
12
11
14
12
14
15
21
7
13
19
9
PAGE 72 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
HONDA GX160UT2 SERIES ENGINE — MUFFLER ASSY.
NO.
3
6
7
9
11
12
13
14
15
19
21
PART NO.
18320Z4M000
18340ZE1010
18355ZE1000
18381Z0T801
18522ZE1000
90002Z0T800
90016ZE1000
90050ZE1000
90055ZE1000
94001080000S
18310Z4MV51
PART NAME
PROTECTOR COMPL., MUFFLER (STD)
DEFLECTOR COMPLETE
ARRESTER, SPARK
GASKET, MUFFLER
GUIDE, MUFFLER
SCREW, TAPPING, 4X8
FLANGE BOLT 6X13
SCREW, TAPPING, 5X8
SCREW, TAPPING, 4X6
NUT 8MM
MUFFLER COMPLETE
QTY.
1
1
1
1
1
2
1
4
1
2
1
REMARKS
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 73
HONDA GX160UT2 SERIES ENGINE — FUEL TANK ASSY.
15
16
17
16
17
13
5
14
7
12
8
2
10
9
12
1
PAGE 74 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
HONDA GX160UT2 SERIES ENGINE — FUEL TANK ASSY.
NO. PART NO.
PART NAME
QTY.
REMARKS
1
16854ZH8000
RUBBER, SUPPORT (107MM) 1
2
16955ZE1010
JOINT, FUEL TANK 1
5%
17631Z0T801
PACKING, FUEL FILLER CAP
1
7
90004ZH7003
FLANGE BOLT, 6X29 1
8
91353671003
O-RING, 14MM...................................................1................REPLACES P/N 91353671004
9
9405006000
FLANGE NUT, 6MM 2
10
91424Z4M003
TUBE, FUEL 4.5X145 1
12
950024080008 CLAMP, TUBE (D8) 2
13♦ 17620Z4H030
CAP COMPLETE, FUEL TANK...........................1................INCLUDES ITEM W/%
REPLACES P/N 17620Z4H020
13◊◗ 17620Z4H900
CAP COMPLETE, FUEL TANK...........................1................INCLUDES ITEM W/%
14
17672Z4H000
FUEL FILTER, FUEL TANK
1
15
17510Z4M000ZB FUEL TANK COMPLETE, NH1, BLK
1
16
90503898000
WASHER, TANK CUSHION 2
17
91302Z4M003
O-RING 5.5X1.5
2
NOTICE
♦ GX160UT2QMX2
◊ GX160UT2QMXC
◗ GX160UT2QCM
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 75
HONDA GX160UT2 SERIES ENGINE — FLYWHEEL ASSY.
5
2
1
9
4
PAGE 76 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
HONDA GX160UT2 SERIES ENGINE — FLYWHEEL ASSY.
NO.
1
2
4♦◊
4◗
5
9
PART NO.
13331357000
19511ZE1000
28451ZH8801
28451Z4M003
31110Z4M000
90201Z0T800
PART NAME
WOODRUFF KEY 25X18
COOLING FAN
STARTER, PULLEY
STARTER, PULLEY
FLYWHEEL COMPLETE
NUT, SPECIAL 14MM
QTY.
1
1
1
1
1
1
REMARKS
NOTICE
♦ GX160UT2QMX2
◊ GX160UT2QMXC
◗ GX160UT2QCM
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 77
HONDA GX160UT2QMX2/QMXC ENGINE — IGN. COIL ASSY.
2
9
1
12
12
PAGE 78 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
HONDA GX160UT2QMX2/QMXC ENGINE — IGN. COIL ASSY.
NO.
1♦◊
2♦
2◊
9
12
PART NO.
30500Z0T802
30700Z0T811
30700Z0T812
36101ZE1010
957010602500
PART NAME
QTY.
REMARKS
COIL ASSY., IGNITION
1
CAP ASSY., NOISE SUPPRESSOR
1
CAP ASSY., NOISE SUPPRESSOR
1
CORD, STOP SWITCH 370MM
1
FLANGE BOLT 6X25..........................................2................REPLACES P/N 90121952000
NOTICE
♦ GX160UT2QMX2
◊ GX160UT2QMXC
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 79
HONDA GX160UT2QCM ENGINE — IGN. COIL ASSY.
15
16
14
12
12
PAGE 80 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
HONDA GX160UT2QCM ENGINE — IGN. COIL ASSY.
NO.
12
14
15
16
PART NO.
957010602500
30500Z0T003
30700Z0T821
32195Z0T003
PART NAME
QTY.
REMARKS
FLANGE BOLT 6X25..........................................2................REPLACES P/N 90121952000
COIL ASSY., IGNITION
1
CAP ASSY., NOISE SUPPRESSOR
1
CORD, STOP SWITCH 370MM
1
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 81
HONDA GX160UT2 SERIES ENGINE — CONTROL ASSY.
30
22
3
5
8
9
24
18
13
26
12
19
25
11
21
15
27
21
7
14
28
17
16
PAGE 82 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
HONDA GX160UT2 SERIES ENGINE — CONTROL ASSY.
NO.
3♦◊
3◗
5
7
8
9
11#
12#
13#
14#
15#
16#♦
16#◊
16#◗
17#
18#
19#
21
22#♦
22#◊◗
24#
25#
26#
27#
28#
30
PART NO.
16500Z4M306
16500Z0V306
16551Z4M000
16555Z4M000
16561Z4M010
16562Z4M000
16571Z4M000
16574ZE1000
16575ZH8000
16576891000
16578ZE1000
16580Z4M810
16580Z4M850
16580Z0V780
16584883300
16592ZE1810
16594883010
90013883000
90015ZE5010
90015Z5T000
90114SA0000
90605230000
0043504060
0202005T125
93500050250H
9405006000
PART NAME
QTY.
REMARKS
CONTROL ASSY................................................1................INCLUDES ITEMS W/#
CONTROL ASSY................................................1................INCLUDES ITEMS W/#
ARM, GOVERNOR
1
ROD, GOVERNOR
1
SPRING, GOVERNOR
1
SPRING, THROTTLE RETURN
1
LEVER, CONTROL
1
LEVER, SPRING
1
WASHER, CONTROL LEVER
1
HOLDER, CABLE
1
SPACER, CONTROL LEVER
1
BASE COMPLETE, CONTROL
1
BASE COMPLETE, CONTROL
1
BASE COMPLETE, CONTROL
1
ADJUSTING SPRING
1
SPRING, CABLE, RETURN
1
HOLDER, WIRE
1
FLANGE BOLT 6X12
2
BOLT, GOVERNOR ARM
1
BOLT, GOVERNOR ARM
1
LOCK NUT 6MM
1
CIR CLIP
1
SCREW 4X6.......................................................1................REPLACES P/N 93500040060H
SCREW 5X16.....................................................1................REPLACES P/N 93500050160A
SCREW 5X25
1
FLANGE NUT 6MM
1
NOTICE
♦ GX160UT2QMX2
◊ GX160UT2QMXC
◗ GX160UT2QCM
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 83
HONDA GX160UT2 SERIES ENGINE — DECALS ASSY.
13
10
12
4
5
3
PAGE 84 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
HONDA GX160UT2 SERIES ENGINE — DECALS ASSY.
NO.
3
4
5
10◊
10◗
12
13
PART NO.
87521Z4M000
87528Z4M000
87532ZH7000
87535ZE1841
87602Z0V780
87516Z4H010
87539Z4M000
PART NAME
EMBLEM (GX160)
MARK, CHOKE
MARK, THROTTLE INDICATION
MARK, AIR CLEANER
MARK, SALES POINT
MARK, OP CAUTION
MARK, EX. CAUTION
QTY.
1
1
1
1
1
1
1
REMARKS
NOTICE
♦ GX160UT2QMX2
◊ GX160UT2QMXC
◗ GX160UT2QCM
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 85
TERMS AND CONDITIONS OF SALE — PARTS
PAYMENT TERMS
5.
Parts must be in new and resalable
condition, in the original Multiquip
package (if any), and with Multiquip part
numbers clearly marked.
6.
The following items are not returnable:
Multiquip reserves the right to quote and
sell direct to Government agencies, and to
Original Equipment Manufacturer accounts
who use our products as integral parts of their
own products.
a.
SPECIAL EXPEDITING SERVICE
Terms of payment for parts are net 30 days.
FREIGHT POLICY
All parts orders will be shipped collect or
prepaid with the charges added to the invoice.
All shipments are F.O.B. point of origin.
Multiquip’s responsibility ceases when a
signed manifest has been obtained from the
carrier, and any claim for shortage or damage
must be settled between the consignee and
the carrier.
b.
MINIMUM ORDER
The minimum charge for orders from Multiquip
is $15.00 net. Customers will be asked for
instructions regarding handling of orders not
meeting this requirement.
RETURNED GOODS POLICY
Return shipments will be accepted and
credit will be allowed, subject to the following
provisions:
1.
A Returned Material Authorization
must be approved by Multiquip prior to
shipment.
2.
Obsolete parts. (If an item is in the
price book and shows as being
replaced by another item, it is
obsolete.)
Any parts with a limited shelf life
(such as gaskets, seals, “O” rings,
and other rubber parts) that were
purchased more than six months
prior to the return date.
c.
Any line item with an extended
dealer net price of less than
$5.00.
d.
Special order items.
e.
Electrical components.
f.
Paint, chemicals, and lubricants.
g.
Decals and paper products.
h.
Items purchased in kits.
7.
The sender will be notified of any material
received that is not acceptable.
To obtain a Return Material Authorization,
a list must be provided to Multiquip
Parts Sales that defines item numbers,
quantities, and descriptions of the items
to be returned.
8.
Such material will be held for five
working days from notification, pending
instructions. If a reply is not received
within five days, the material will be
returned to the sender at his expense.
a.
The parts numbers and descriptions
must match the current parts price
list.
9.
b.
The list must be typed or computer
generated.
Credit on returned parts will be issued
at dealer net price at time of the original
purchase, less a 15% restocking
charge.
c.
The list must state the reason(s)
for the return.
d.
The list must reference the sales
order(s) or invoice (s) under
which the items were originally
purchased.
e.
The list must include the name
and phone number of the person
requesting the RMA.
3.
A copy of the Return Material Authorization
must accompany the return shipment.
4.
Freight is at the sender’s expense. All
parts must be returned freight prepaid to
Multiquip’s designated receiving point.
10. In cases where an item is accepted, for
which the original purchase document
can not be determined, the price will be
based on the list price that was effective
twelve months prior to the RMA date.
A $35.00 surcharge will be added to the
invoice for special handling including bus
shipments, insured parcel post or in cases
where Multiquip must personally deliver the
parts to the carrier.
LIMITATIONS OF SELLER’S LIABILITY
Multiquip shall not be liable hereunder for
damages in excess of the purchase price of
the item with respect to which damages are
claimed, and in no event shall Multiquip be
liable for loss of profit or good will or for any
other special, consequential or incidental
damages.
LIMITATION OF WARRANTIES
No warranties, express or implied, are
made in connection with the sale of parts or
trade accessories nor as to any engine not
manufactured by Multiquip. Such warranties
made in connection with the sale of new,
complete units are made exclusively by a
statement of warranty packaged with such
units, and Multiquip neither assumes nor
authorizes any person to assume for it
any other obligation or liability whatever in
connection with the sale of its products. Apart
from such written statement of warranty,
there are no warranties, express, implied or
statutory, which extend beyond the description
of the products on the face hereof.
Effective: February 22, 2006
11. Credit issued will be applied to future
purchases only.
PRICING AND REBATES
Prices are subject to change without prior
notice. Price changes are effective on a
specific date and all orders received on or
after that date will be billed at the revised price.
Rebates for price declines and added charges
for price increases will not be made for stock
on hand at the time of any price change.
PAGE 86 — MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17)
NOTES
MVC88VTH/VTHW PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #9 (09/14/17) — PAGE 87
OPERATION AND PARTS MANUAL
HERE’S HOW TO GET HELP
PLEASE HAVE THE MODEL AND SERIAL
NUMBER ON-HAND WHEN CALLING
UNITED STATES
Multiquip Corporate Office
18910 Wilmington Ave.
Carson, CA 90746
Contact: mq@multiquip.com
MQ Parts Department
Tel. (800) 421-1244
Fax (310) 537-3927
800-427-1244
310-537-3700
Service Department
Warranty Department
800-421-1244
310-537-3700
800-421-1244
310-537-3700
Fax: 800-672-7877
Fax: 310-943-2249
Technical Assistance
800-478-1244
Fax: 310-943-2238
CANADA
UNITED KINGDOM
Multiquip
Multiquip (UK) Limited Head Office
4110 Industriel Boul.
Laval, Quebec, Canada H7L 6V3
Contact: infocanda@multiquip.com
Tel: (450) 625-2244
Tel: (877) 963-4411
Fax: (450) 625-8664
Unit 2, Northpoint Industrial Estate,
Globe Lane,
Dukinfield, Cheshire SK16 4UJ
Contact: sales@multiquip.co.uk
Tel: 0161 339 2223
Fax: 0161 339 3226
© COPYRIGHT 2017, MULTIQUIP INC.
Multiquip Inc, the MQ logo and the Mikasa logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks
are the property of their respective owners and used with permission.
This manual MUST accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold.
The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical data contained in
this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifications, design or the information published
in this publication at any time without notice and without incurring any obligations.
Your Local Dealer is:
Download PDF

advertising