D
oa
nl
ow
d
de
m
fro
e
.b
re
190-01510-00_0D
or
October 2013
nb
de
Owner’s Manual
an
.v
w
w
w
Edge 810
®
Printed in Taiwan
D
nl
ow
oa
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the
right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such
changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
Garmin®, the Garmin logo, Auto Lap®, Auto Pause®, City Navigator®, Edge®, and Virtual Partner® are trademarks of Garmin Ltd.‍ or its subsidiaries,
registered in the USA and other countries.‍ ANT‍+™, BaseCamp™,Garmin Connect™, and GSC™ are trademarks of Garmin Ltd.‍ or its subsidiaries.‍ These
trademarks may not be used without the express permission of Garmin.‍
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc.‍ and any use of such marks by Garmin is under license.‍ Mac® is a registered
trademark of Apple Computer, Inc.‍ microSD™ is a trademark of SD-3C, LLC.‍ New Leaf® is a registered trademark of the Angeion Corporation.‍ Training Stress
Score™ (TSS), Intensity Factor™ (IF), and Normalized Power™ (NP) are trademarks of Peaksware, LLC.‍ Windows® is a registered trademark of Microsoft
Corporation in the United States and other countries.‍ Other trademarks and trade names are those of their respective owners.‍
d
de
m
fro
e
.b
re
or
nb
de
an
.v
w
w
w
This product is ANT‍+™ certified.‍ Visit www.thisisant.com/‍directory for a list of compatible products and apps.‍
D
nl
ow
Deleting Files ........................................................................ 9
Disconnecting the USB Cable ............................................... 9
oa
d
de
Table of Contents
Navigation.......................................................................9
Getting Started ........................................................................... 1
Charging the Device .................................................................. 1
About the Battery .................................................................. 1
Installing the Standard Mount .................................................... 1
Installing the Out-Front Mount ................................................... 1
Releasing the Edge ............................................................... 2
Turning On the Device ............................................................... 2
Keys ...................................................................................... 2
Acquiring Satellite Signals ......................................................... 2
Locations .................................................................................... 9
Saving Your Location ............................................................ 9
Saving Locations from the Map ............................................. 9
Navigating to a Location ........................................................ 9
Navigating to Known Coordinates ......................................... 9
Navigating Back to Start ........................................................ 9
Stopping Navigation .............................................................. 9
Projecting a Location ............................................................. 9
Editing Locations ................................................................. 10
Deleting Locations ............................................................... 10
Route Settings ......................................................................... 10
Selecting an Activity for Route Calculation ......................... 10
Purchasing Additional Maps .................................................... 10
Finding an Address ............................................................. 10
Finding a Point of Interest ................................................... 10
Finding Nearby Locations ................................................... 10
Topographical Maps ............................................................ 10
Map Settings ............................................................................ 10
Advanced Map Settings ...................................................... 10
Changing the Map Orientation ............................................ 10
e
.b
re
or
nb
de
Table of Contents
an
.v
History .............................................................................7
Viewing Your Ride ..................................................................... 7
Viewing Data Totals .............................................................. 7
Sending Your Ride to Garmin Connect ...................................... 7
Garmin Connect .................................................................... 8
Connected Features .............................................................. 8
Deleting History .......................................................................... 8
Data Recording .......................................................................... 8
Changing the Data Storage Location .................................... 8
Installing a Memory Card ...................................................... 8
Data Management ..................................................................... 8
Connecting the Device to Your Computer ............................. 8
Transferring Files to Your Device .......................................... 9
w
w
ANT‍+ Sensors................................................................ 5
Putting On the Heart Rate Monitor ............................................. 5
Setting Your Heart Rate Zones ............................................. 5
About Heart Rate Zones ....................................................... 6
Fitness Goals ........................................................................ 6
Installing the GSC 10 ................................................................. 6
About the GSC 10 ................................................................. 6
Data Averaging for Cadence or Power ................................. 6
Training with Power Meters ....................................................... 7
Setting Your Power Zones .................................................... 7
Calibrating Your Power Meter ............................................... 7
Pairing Your ANT‍+ Sensors ....................................................... 7
Pairing a Heart Rate Monitor ..................................................... 7
Using the Weight Scale .............................................................. 7
w
Going for a Ride ......................................................................... 3
Alerts .......................................................................................... 3
Setting Range Alerts ............................................................. 3
Setting a Recurring Alert ....................................................... 3
Workouts .................................................................................... 3
Following a Workout From the Web ...................................... 3
Creating a Workout ............................................................... 3
Repeating Workout Steps ..................................................... 4
Starting a Workout ................................................................ 4
Stopping a Workout ............................................................... 4
Editing a Workout .................................................................. 4
Deleting a Workout ................................................................ 4
Using Virtual Partner® ............................................................... 4
Courses ...................................................................................... 4
Creating a Course on Your Device ....................................... 4
Following a Course From the Web ........................................ 4
Tips for Training with Courses .............................................. 4
Displaying a Course on the Map ........................................... 4
Changing the Course Speed ................................................. 5
Stopping a Course ................................................................ 5
Deleting a Course ................................................................. 5
Personal Records ...................................................................... 5
Restoring Your Personal Records ......................................... 5
Training Zones ........................................................................... 5
Setting Your Speed Zones .................................................... 5
m
Training ........................................................................... 3
fro
Introduction.................................................................... 1
Customizing Your Device............................................ 11
Profiles ..................................................................................... 11
Updating Your Bike Profile .................................................. 11
Updating Your Activity Profile .............................................. 11
Setting Up Your User Profile ............................................... 11
About Lifetime Athletes ....................................................... 11
Bluetooth Settings .................................................................... 11
About Training Settings ............................................................ 11
Customizing the Data Pages ............................................... 11
Using Auto Pause ............................................................... 11
Marking Laps by Position .................................................... 12
Marking Laps by Distance ................................................... 12
Using Auto Scroll ................................................................. 12
Changing the Start Notice ................................................... 12
System Settings ....................................................................... 12
GPS Settings ....................................................................... 12
Display Settings .................................................................. 12
Data Recording Settings ..................................................... 12
Changing the Units of Measure ........................................... 12
Changing the Configuration Settings .................................. 13
Changing the Device Language .......................................... 13
Setting the Device Tones .................................................... 13
Time Zones ......................................................................... 13
Device Information....................................................... 13
Specifications ........................................................................... 13
Edge Specifications ............................................................. 13
Heart Rate Monitor Specifications ....................................... 13
GSC 10 Specifications ........................................................ 13
Device Care ............................................................................. 13
Cleaning the Device ............................................................ 13
Caring for the Heart Rate Monitor ....................................... 13
Heart Rate Monitor Battery ...................................................... 13
Replacing the Heart Rate Monitor Battery .......................... 13
Replacing the GSC 10 Battery ................................................. 14
Troubleshooting........................................................... 14
Resetting the Device ................................................................ 14
Clearing User Data .................................................................. 14
Maximizing Battery Life ............................................................ 14
Decreasing the Backlight .................................................... 14
Adjusting the Backlight Timeout .......................................... 14
Using the Auto Power Down Feature .................................. 14
Calibrating the Touchscreen .................................................... 14
i
D
m
e
.b
re
or
nb
de
an
.v
w
w
w
ii
fro
Index..............................................................................18
d
de
Registering Your Device .......................................................... 14
Data Fields ............................................................................... 15
Heart Rate Zone Calculations .................................................. 16
Wheel Size and Circumference ............................................... 16
Software License Agreement ................................................... 16
oa
Appendix.......................................................................14
nl
ow
Locking the Touchscreen ......................................................... 14
Unlocking the Touchscreen ................................................. 14
Getting More Information ......................................................... 14
Temperature Readings ............................................................ 14
Viewing Device Information ..................................................... 14
Updating the Software ............................................................. 14
Table of Contents
D
For the best GPS reception, position the bike mount so the front
of the Edge is oriented toward the sky.‍ You can install the bike
mount on the stem or the handlebars.‍
1 Select a secure location to mount the Edge where it does not
interfere with the safe operation of your bike.‍
2 Place the rubber disk À on the back of the bike mount.‍
The rubber tabs align with the back of the bike mount so it
stays in place.‍
d
de
m
fro
nb
de
an
.v
w
w
w
Getting Started
Installing the Standard Mount
oa
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.‍
Always consult your physician before you begin or modify any
exercise program.‍
nl
ow
Introduction
e
NOTICE
To prevent corrosion, thoroughly dry the mini-USB port, the
weather cap, and the surrounding area before charging or
connecting to a computer.‍
.b
re
Charging the Device
or
When using your device the first time, you should complete
these tasks to set up the device and learn about the basic
features.‍
1 Charge the device (page 1).‍
2 Install your device using the standard mount (page 1) or
the out-front mount (page 1).‍
3 Turn on the device (page 2).‍
4 Locate satellites (page 2).‍
5 Go for a ride (page 3).‍
6 Register the device (page 14).‍
7 Upload your ride to Garmin Connect™ (page 7).‍
3 Place the bike mount on the bike stem.‍
4 Attach the bike mount securely using the two bands Á.‍
5 Align the tabs on the back of the Edge with the bike mount
notches Â.‍
6 Press down slightly and turn the Edge clockwise until it locks
into place.‍
The device is powered by a built-in lithium-ion battery that you
can charge using a standard wall outlet or a USB port on your
computer.‍
NOTE: The device will not charge when outside the
temperature range of 32° to 113°F (0° to 45°C).‍
1 Pull up the weather cap À from the mini-USB port Á.‍
Installing the Out-Front Mount
1 Select a secure location to mount the Edge where it does not
interfere with the safe operation of your bike.‍
2 Use the hex key to remove the screw À from the handlebar
connector Á.‍
2 Plug the small end of the USB cable into the mini-USB port.‍
3 Plug the USB end of the cable into the AC adapter or a
computer USB port.‍
4 Plug the AC adapter into a standard wall outlet.‍
When you connect the device to a power source, the device
turns on.‍
5 Charge the device completely.‍
A fully charged battery can run for up to 15 hours before it must
be recharged.‍
About the Battery
WARNING
This device contains a lithium-ion battery.‍ See the Important
Safety and Product Information guide in the product box for
product warnings and other important information.‍
Introduction
3 If you want to change the orientation of the mount, remove
the two screws on the back side of the mount Â, rotate the
connector Ã, and replace the screws.‍
4 If the handlebar diameter is 26 mm, place the rubber pad
around the handlebar.‍
5 Place the handlebar connector around the rubber pad or
handlebar (31.‍8 mm diameter).‍
6 Replace the screw.‍
NOTE: Garmin® recommends a torque specification of 7 lbfin.‍ (0.‍8 N-m).‍ Check the tightness of the screw periodically.‍
1
D
nl
ow
Using the Touchscreen
• When the timer is running, tap the screen to view the timer
overlay.‍
The timer overlay allows you to use the settings and search
features during a ride.‍
• Select
to save your changes and close the page.‍
• Select to close the page and return to the previous page.‍
• Select
to return to the previous page.‍
• Select
to return to the home screen.‍
• Select and to scroll.‍
• Select
to view the connections page.‍
• Select to search for a location.‍
• Select to search near a location.‍
• Select
to search by name.‍
• Select to delete an item.‍
oa
d
de
7 Align the tabs on the back of the Edge with the bike mount
notches Ä.‍
m
fro
into place.‍
Releasing the Edge
1 Turn the Edge clockwise to unlock the device.‍
2 Lift the Edge off the mount.‍
Turning On the Device
The first time you turn on the device, you are prompted to
configure system settings and profiles (page 11).‍
1 Hold .‍
2 Follow the on-screen instructions.‍
3 If your device included a heart rate monitor and a GSC™ 10,
activate the ANT‍+™ sensors during configuration.‍
For more information about ANT‍+ sensors, see page 5.‍
e
.b
re
or
nb
de
an
.v
w
w
w
8 Press down slightly and turn the Edge clockwise until it locks
Viewing the Connections Page
The connections page displays the status of the satellite
signals, ANT‍+ sensors, and your smartphone.‍
From the home screen, select the status bar at the top of the
page.‍
Keys
The connections page appears.‍ A flashing icon means the
device is searching.‍ You can select any icon to change the
settings.‍
Using the Backlight
• At any time, select anywhere on the screen to turn on the
backlight.‍
• Select to adjust the backlight brightness and timeout.‍
À
Select to turn the backlight on and off.‍
Hold to turn the device on and off.‍
Á
Select to mark a new lap.‍
Â
Select to start and stop the timer.‍
Home Screen Overview
The home screen gives you quick access to all the features of
the Edge.‍
Bike 1
Select to change your bike profile.‍
RIDE
Select to go for a ride.‍
Road
Select to change your activity profile.‍
Acquiring Satellite Signals
Select to manage your history, courses, workouts, and
personal records.‍
Before you can use the GPS tracking and navigation features,
you must acquire satellite signals.‍
The device may need a clear view of the sky to acquire satellite
signals.‍ The time and date are set automatically based on the
GPS position.‍
Select to view the map.‍
Select to view the setup menu.‍
2
Introduction
D
nl
ow
Setting a Recurring Alert
The front of the device should be oriented toward the sky.‍
2 From the home screen, select RIDE.‍
3 Wait while the device locates satellites.‍
It may take 30–60 seconds to locate satellite signals.‍
TIP: Do not begin moving until the timer page appears
(page 3).‍
A recurring alert notifies you every time the device records a
specified value or interval.‍ For example, you can set the device
to alert you every 30 minutes.‍
1 From the home screen, select > Activity Profiles.‍
2 Select an activity profile.‍
3 Select Alerts.‍
4 Select Time, Distance, or Calorie.‍
5 Turn on the alert.‍
6 Enter a value.‍
7 Select .‍
Each time you reach the alert value, a message appears.‍ The
device also beeps if audible tones are turned on (page 13).‍
m
e
.b
re
or
nb
de
an
.v
w
w
w
Before you can record speed and distance, you must locate
satellite signals (page 2) or pair your device with an optional
ANT‍+ sensor.‍
NOTE: History is recorded only while the timer is running.‍
1 From the home screen, select RIDE.‍
2 Wait while the device locates satellites.‍
3 Select to start the timer.‍
fro
Going for a Ride
d
de
Training
oa
1 Go outdoors to an open area.‍
Workouts
You can create custom workouts that include goals for each
workout step and for varied distances, times, and calories.‍ You
can create workouts using Garmin Connect, and transfer them
to your device.‍ You can also create and save a workout directly
on your device.‍
You can schedule workouts using Garmin Connect.‍ You can
plan workouts in advance and store them on your device.‍
Following a Workout From the Web
4
5
6
7
Swipe the screen for additional data pages.‍
If necessary, tap the screen to view the timer overlay.‍
Select
to stop the timer.‍
Select Save.‍
Alerts
You can use alerts to train toward specific time, distance,
calorie, heart rate, cadence, and power goals.‍ Alert settings are
saved with your activity profile.‍
Setting Range Alerts
If you have an optional heart rate monitor, GSC 10, or power
meter, you can set up range alerts.‍ A range alert notifies you
any time the device is above or below a specified range of
values.‍ For example, you can set the device to alert you when
your heart rate is below 60 beats per minute (bpm) and over
210 bpm.‍ You can also use a training zone (page 5) for the
range alert.‍
1 From the home screen, select > Activity Profiles.‍
2 Select a profile.‍
3 Select Alerts.‍
4 Select Heart Rate, Cadence, or Power.‍
5 Turn on the alert.‍
6 Enter the minimum and maximum values or select a zone.‍
7 Select .‍
Each time you exceed or drop below the specified range, a
message appears.‍ The device also beeps if audible tones are
turned on (page 13).‍
Training
Before you can download a workout from Garmin Connect, you
must have a Garmin Connect account (page 8).‍
1 Connect the device to your computer.‍
2 Go to www.garminconnect.com/‍workouts.‍
3 Create a new workout.‍
4 Select Send to Device.‍
5 Disconnect the device, and turn it on.‍
6 Select > Workouts.‍
7 Select the workout.‍
8 Select Do Workout.‍
Creating a Workout
1 From the home screen, select
> Workouts > .‍
A new workout appears.‍ The first step is open by default,
and it can be used as a warmup step.‍
2 Select Name, and enter a workout name.‍
3 Select Add New Step.‍
4 Select a step, and select Edit Step.‍
5 Select Duration to specify how the step is measured.‍
For example, select Distance to end the step after a specific
distance.‍
If you select Open, you can select
at anytime to end the
step.‍
6 If necessary, enter a value in the field below Duration.‍
7 Select Target to choose your goal during the step.‍
For example, select Heart Rate to maintain a consistent
heart rate during the step.‍
8 If necessary, select a target zone or enter a custom range.‍
For example, you can select a heart rate zone.‍ Each time
you exceed or drop below the specified heart rate, the device
beeps and displays a message.‍
9 If necessary, select in the Rest Lap field.‍
During a rest lap, the timer continues to run and data is
recorded.‍
10 Select to save the step.‍
11 Select to save the workout.‍
3
D
m
e
.b
re
or
nb
de
an
.v
w
w
w
Stopping a Workout
to end a workout step.‍
to stop the timer.‍
>
> Workouts > Stop Workout to
Editing a Workout
1 From the home screen, select > Workouts.‍
2 Select a workout.‍
3 Select .‍
4 Select a step, and select Edit Step.‍
5 Change the step attributes, and select .‍
6 Select to save the workout.‍
Deleting a Workout
1 From the home screen, select
2 Select a workout.‍
3 Select > > .‍
Following a previously recorded activity: You can follow a
saved course simply because it is a good route.‍ For
example, you can save and follow a bike friendly commute to
work.‍
Racing against a previously recorded activity: You can also
follow a saved course, trying to match or exceed previously
set performance goals.‍ For example, if the original course
was completed in 30 minutes, you can race against a Virtual
Partner trying to complete the course in under 30 minutes.‍
Following an existing ride from Garmin Connect: You can
send a course from Garmin Connect to your device.‍ Once it
is saved to your device, you can follow the course or race
against the course.‍
Creating a Course on Your Device
After you begin a workout, the device displays each step of the
workout, the target (if any), and current workout data.‍ An
audible alarm sounds when you are about to finish a workout
step.‍ A message appears, counting down the time or distance
until a new step begins.‍
• At any time, select
• At any time, select
• At any time, select
end the workout.‍
fro
> Workouts.‍
Courses
to adjust the speed of the Virtual
d
de
Starting a Workout
1 From the home screen, select
2 Select a workout.‍
3 Select Do Workout.‍
and
Partner during your ride.‍
oa
Before you can repeat a workout step, you must create a
workout with at least one step.‍
1 Select Add New Step.‍
2 Select Duration.‍
3 Select an option:
• Select Repeat to repeat a step one or more times.‍ For
example, you can repeat a 5-mile step ten times.‍
• Select Repeat Until to repeat a step for a specific
duration.‍ For example, you can repeat a 5-mile step for 60
minutes or until your heart rate reaches 160 bpm.‍
4 Select Back to Step, and select a step to repeat.‍
5 Select to save the step.‍
nl
ow
3 If necessary, use
Repeating Workout Steps
> Workouts.‍
Using Virtual Partner®
Your Virtual Partner is a training tool designed to help you meet
your goals.‍
1 Go for a ride.‍
2 Scroll to the Virtual Partner page to see who is leading.‍
Before you can create a course, you must have history with
GPS track data saved to your device.‍
1 From the home screen, select > Courses > .‍
2 Select an activity on which to base your course.‍
3 Enter a name for the course.‍
4 Select .‍
The course appears in the list.‍
5 Select the course, and review the course data.‍
6 If necessary, select Settings to edit the course features.‍
For example, you can change the name of the course or turn
on Virtual Partner.‍
7 Select > RIDE.‍
Following a Course From the Web
Before you can download a course from Garmin Connect, you
must have a Garmin Connect account (page 8).‍
1 Connect the device to your computer.‍
2 Go to www.garminconnect.com.‍
3 Create a new course or select an existing course.‍
4 Select Send to Device.‍
5 Disconnect the device, and turn it on.‍
6 Select > Courses.‍
7 Select the course.‍
8 Select RIDE.‍
Tips for Training with Courses
• Use turn-by-turn navigation prompts by turning on Guide
Text (page 10).‍
• If you include a warmup, select
to begin the course, and
warm up as normal.‍
• Stay away from your course path as you warm up.‍ When you
are ready to begin, head toward your course.‍ When you are
on any part of the course path, a message appears.‍
NOTE: As soon as you select , your Virtual Partner starts
the course and does not wait for you to warm up.‍
• Scroll to the map to view the course map.‍
If you stray from the course, the device displays a message.‍
Displaying a Course on the Map
For each course saved to your device, you can customize how it
appears on the map.‍ For example, you can set your commute
course to always display on the map in yellow.‍ You can have an
alternate course display in green.‍ This allows you to see the
courses while you are riding, but not follow or navigate a
particular course.‍
4
Training
D
d
de
Your device can be used with wireless ANT‍+ sensors.‍ For more
information about compatibility and purchasing optional
sensors, go to http:​/‍​/‍buy​.garmin​.com.‍
m
fro
w
Putting On the Heart Rate Monitor
w
w
NOTE: If you do not have a heart rate monitor, you can skip this
task.‍
You should wear the heart rate monitor directly on your skin,
just below your breastplate.‍ It should be snug enough to stay in
place during your activity.‍
1 Snap the heart rate monitor module À onto the strap.‍
e
.b
re
or
nb
de
an
.v
Changing the Course Speed
1 From the home screen, select > Courses.‍
2 Select a course.‍
3 Select RIDE.‍
4 Scroll to the Virtual Partner page.‍
5 Use or to adjust the percentage of time to complete the
ANT‍+ Sensors
oa
From the home screen, select
> Courses.‍
Select the course.‍
Select Settings > Map Display.‍
Select Always Display > On to have the course appear on
the map.‍
5 Select Color, and select a color.‍
The next time you ride near the course, it appears on the map.‍
nl
ow
1
2
3
4
course.‍
For example, to improve your course time by 20%, enter a
course speed of 120%.‍ You will race against the Virtual
Partner to finish a 30-minute course in 24 minutes.‍
Stopping a Course
1 Tap the screen to view the timer overlay.‍
2 Select > Courses > Stop Course.‍
Deleting a Course
1 From the home screen, select
2 Select a course.‍
3 Select > .‍
> Courses.‍
Personal Records
When you complete a ride, the device displays any new
personal records you achieved during that ride.‍ Personal
records include your fastest time over a standard distance,
longest ride, and most ascent gained during a ride.‍
The Garmin logos (on the module and the strap) should be
right-side up.‍
2 Wet the electrodes Á on the back of the strap to create a
strong connection between your chest and the transmitter.‍
3 If the heart rate monitor has a contact patch Â, wet the
contact patch.‍
Wrap
the strap around your chest, and connect the strap
4
hook à to the loop Ä.‍
Restoring Your Personal Records
You can revert a personal record back to the previous saved
record.‍
1 From the home screen, select > Personal Records.‍
2 Select .‍
3 Select a record, and select .‍
NOTE: This does not delete any saved activities.‍
Training Zones
• Heart rate zones (page 5)
• Power zones (page 7)
• Speed zones (page 5)
Setting Your Speed Zones
Your device contains several different speed zones, ranging
from very slow to your maximum speed.‍ The values for the
zones are default values and may not match your personal
abilities.‍ You can customize your zones on the device or using
Garmin Connect.‍
1 From the home screen, > Training Zones > Speed.‍
2 Select a zone.‍
You can enter a custom name for the zone.‍
3 Enter the minimum and maximum speed values.‍
4 Repeat steps 2–3 for each zone.‍
ANT+ Sensors
The Garmin logos should be right-side up.‍
5 Bring the device within 10 ft.‍ (3 m) of the heart rate monitor.‍
After you put on the heart rate monitor, it is active and sending
data.‍
Setting Your Heart Rate Zones
The device uses your user profile information from the initial
setup to determine your heart rate zones.‍ You can manually
adjust the heart rate zones according to your fitness goals
(page 6).‍ For the most accurate calorie data during your
activity, set your maximum heart rate, minimum heart rate,
resting heart rate, and heart rate zones.‍
1 From the home screen, select > Training Zones > Heart
Rate.‍
2 Enter your maximum, minimum, and resting heart rate
values.‍
The zone values update automatically, but you can also edit
each value manually.‍
3 Select Based On:.‍
5
D
nl
ow
oa
4 Select an option:
d
de
• Select BPM to view and edit the zones in beats per
minute.‍
• Select % Max.‍ to view and edit the zones as a percentage
of your maximum heart rate.‍
• Select % HRR to view and edit the zones as a percentage
of your resting heart rate.‍
m
fro
an
.v
w
w
w
About Heart Rate Zones
nb
de
The pedal magnet must be within 5 mm of the GSC 10.‍ The
indication line Ä on the pedal magnet must line up with the
indication line Å on the GSC 10.‍
5 Unscrew the spoke magnet Æ from the plastic piece.‍
e
.b
re
or
Many athletes use heart rate zones to measure and increase
their cardiovascular strength and improve their level of fitness.‍ A
heart rate zone is a set range of heartbeats per minute.‍ The five
commonly accepted heart rate zones are numbered from 1 to 5
according to increasing intensity.‍ Generally, heart rate zones
are calculated based on percentages of your maximum heart
rate.‍
Fitness Goals
Knowing your heart rate zones can help you measure and
improve your fitness by understanding and applying these
principles.‍
• Your heart rate is a good measure of exercise intensity.‍
• Training in certain heart rate zones can help you improve
cardiovascular capacity and strength.‍
• Knowing your heart rate zones can prevent you from
overtraining and can decrease your risk of injury.‍
If you know your maximum heart rate, you can use the table
(page 16) to determine the best heart rate zone for your
fitness objectives.‍
If you do not know your maximum heart rate, use one of the
calculators available on the Internet.‍ Some gyms and health
centers can provide a test that measures maximum heart rate.‍
Installing the GSC 10
NOTE: If you do not have a GSC 10, you can skip this task.‍
Both magnets must be aligned with their respective indication
lines for the Edge to receive data.‍
1 Place the GSC 10 on the rear chain stay (on the side
opposite the drive train).‍
2 If necessary, place the flat rubber pad À or the triangleshaped rubber pad between the GSC 10 and the chain stay
for stability.‍
6 Place the spoke in the groove of the plastic piece, and
tighten it slightly.‍
The spoke magnet can face away from the GSC 10 if there is
not enough room between the sensor arm and the spoke.‍
The spoke magnet must line up with the indication line Ç on
the sensor arm.‍
7 Loosen the screw È on the sensor arm.‍
8 Move the sensor arm to within 5 mm of the spoke magnet.‍
You can also tilt the GSC 10 closer to either magnet to
improve alignment.‍
9 Select Reset É on the GSC 10.‍
The LED turns red, then green.‍
10 Pedal to test the sensor alignment.‍
The red LED blinks each time the pedal magnet passes the
sensor.‍ The green LED blinks each time the spoke magnet
passes the sensor arm.‍
NOTE: The LED blinks for the first 60 passes after a reset.‍
Select Reset again if you require additional passes.‍
11 When everything is aligned and working correctly, tighten the
cable ties, the sensor arm, and the spoke magnet.‍
Garmin recommends that the torque is 1.‍9 to 2.‍4 lbf-in.‍ (0.‍21
to 0.‍27 N-m) to ensure a water tight seal on the GSC 10
sensor arm.‍
About the GSC 10
3 Loosely attach the GSC 10 using two cable ties Á.‍
4 Attach the pedal magnet  to the crank arm using the
adhesive mount and a cable tie Ã.‍
Cadence data from the GSC 10 is always recorded.‍ If there is
no GSC 10 paired, GPS data is used to calculate the speed and
distance.‍
Cadence is your rate of pedaling or “spinning” measured by the
number of revolutions of the crank arm per minute (rpm).‍ There
are two sensors on the GSC 10: one for cadence and one for
speed.‍
Data Averaging for Cadence or Power
The non-zero data-averaging setting is available if you are
training with an optional cadence sensor or power meter.‍ The
default setting is to exclude zero values that occur when you are
not pedaling.‍
To change this setting, see page 12.‍
6
ANT+ Sensors
D
e
.b
re
or
History
nb
de
Before you can pair, you must put on the heart rate monitor.‍
1 Bring the device within range (3 m) of the heart rate monitor.‍
NOTE: Stay 10 m away from other ANT‍+ sensors while
pairing.‍
an
.v
Pairing a Heart Rate Monitor
If you have an ANT‍+ compatible weight scale, the device can
read the data from the weight scale.‍
1 From the home screen, select > Weight Scale.‍
A message appears when the weight scale is found.‍
2 Stand on the scale when indicated.‍
NOTE: If using a body composition scale, remove shoes and
socks to ensure that all body composition parameters are
read and recorded.‍
Step off the scale when indicated.‍
3
TIP: If an error occurs, step off the scale.‍ Step on when
indicated.‍
w
w
Before you can pair, you must put on the heart rate monitor or
install the sensor.‍
Pairing is the connecting of ANT‍+ wireless sensors, for
example, connecting a heart rate monitor with your Garmin
device.‍
1 Bring the device within range (3 m) of the sensor.‍
NOTE: Stay 10 m away from other ANT‍+ sensors while
pairing.‍
2 From the home screen, select > Bike Profiles
3 Select a profile.‍
4 Select a sensor.‍
5 Enable the sensor, and select Search.‍
When the sensor is paired with your device, the sensor
status is Connected.‍ You can customize a data field to
display sensor data.‍
w
Pairing Your ANT‍+ Sensors
m
Calibrating Your Power Meter
Before you can calibrate your power meter, it must be properly
installed, paired with your GPS device, and actively recording
data.‍
For calibration instructions specific to your power meter, refer to
the manufacturer's instructions.‍
1 From the home screen, select .‍
2 Select Bike Profiles.‍
3 Select a profile.‍
4 Select > Calibrate.‍
5 Keep your power meter active by pedaling until the message
appears.‍
6 Follow the on-screen instructions.‍
Using the Weight Scale
fro
The values for the zones are default values and may not match
your personal abilities.‍ You can manually adjust your zones on
the device or using Garmin Connect.‍ If you know your functional
threshold power (FTP) value, you can enter it and allow the
software to calculate your power zones automatically.‍
1 From the home screen, select > Training Zones >
Power.‍
2 Enter your FTP value.‍
3 Select Based On:.‍
4 Select an option:
• Select Watts to view and edit the zones in watts.‍
• Select % FTP to view and edit the zones as a percentage
of your functional threshold power.‍
> Heart Rate > Enable > Search.‍
When the heart rate monitor is paired with your device, the
sensor status is Connected.‍
d
de
Setting Your Power Zones
2 Select
oa
• Go to www.garmin.com/‍intosports for a list of third-party
ANT‍+ sensors that are compatible with your device.‍
• For more information, see the owner's manual for your power
meter.‍
• Adjust your power zones to match your goals and abilities
(page 7).‍
• Use range alerts to be notified when you reach a specified
power zone (page 3).‍
• Customize the power data fields (page 11).‍
nl
ow
Training with Power Meters
History
History includes time, distance, calories, speed, lap data,
elevation, and optional ANT‍+ sensor information.‍
NOTE: History is not recorded while the timer is stopped or
paused.‍
When the device memory is full, a message appears.‍ The
device does not automatically delete or overwrite your history.‍
Upload your history to Garmin Connect periodically to keep
track of all your ride data.‍
Viewing Your Ride
1 From the home screen, select
2 Select Last Ride or All Rides.‍
3 Select an option.‍
> Rides.‍
Viewing Data Totals
You can view the accumulated data you have saved to the
Edge, including the number of rides, time, distance, and
calories.‍
From the home screen, select
> Totals.‍
Sending Your Ride to Garmin Connect
NOTICE
To prevent corrosion, thoroughly dry the mini-USB port, the
weather cap, and the surrounding area before charging or
connecting to a computer.‍
1 Pull up the weather cap À from the mini-USB port Á.‍
2 Plug the small end of the USB cable into the mini-USB port.‍
3 Plug the large end of the USB cable into a computer USB
port.‍
4 Go to www.garminconnect.com.‍
7
D
d
de
m
fro
Data Recording
nb
de
an
.v
w
w
w
The device uses smart recording.‍ It records key points where
you change direction, speed, or heart rate.‍
When a power meter is paired, the device records points every
second.‍ Recording points every second provides an extremely
detailed track, and uses more of the available memory.‍
For information about data averaging for cadence and power,
see page 6.‍
e
.b
re
or
Connect with your friends on Garmin Connect.‍ Garmin Connect
gives you the tools to track, analyze, share, and encourage
each other.‍ Record the events of your active lifestyle including
runs, walks, rides, swims, hikes, triathlons, and more.‍ To sign
up for a free account, go to www.garminconnect.com/‍start.‍
Store your activities: After you complete and save an activity
with your device, you can upload that activity to Garmin
Connect and keep it as long as you want.‍
Analyze your data: You can view more detailed information
about your activity, including time, distance, elevation, heart
rate, calories burned, an overhead map view, pace and
speed charts, and customizable reports.‍
• Select All Courses to delete all courses you have saved
or transferred to the device.‍
• Select All Workouts to delete all workouts you have
saved or transferred to the device.‍
• Select All Personal Records to delete all personal
records saved to the device.‍
NOTE: This does not delete any saved activities.‍
3 Select .‍
oa
Garmin Connect
nl
ow
5 Select Getting Started.‍
6 Follow the on-screen instructions.‍
Changing the Data Storage Location
1 From the home screen, select > System > Data
Plan your training: You can choose a fitness goal and load
one of the day-by-day training plans.‍
Share your activities: You can connect with friends to follow
each other's activities or post links to your activities on your
favorite social networking sites.‍
Connected Features
The Edge has several connected features for your compatible
Bluetooth® enabled smartphone.‍ For more information about
how to use your Edge, go to www.garmin.com/‍intosports​/‍apps.‍
NOTE: Your Edge must be connected to your Bluetooth
enabled smartphone to take advantage of these features.‍
LiveTrack: Allows friends and family to follow your races and
training activities in real time.‍ You can invite followers using
email or social media, allowing them to view your live data on
a Garmin Connect tracking page.‍
Activity upload to Garmin Connect: Automatically sends your
activity to Garmin Connect as soon as you finish recording
the activity.‍
Course and workout downloads from Garmin Connect:
Allows you to search for activities on Garmin Connect using
your smartphone and send them to your device so you can
repeat them as a course or workout.‍
Social media interactions: Allows you to post an update to
your favorite social media website when you upload an
activity to Garmin Connect.‍
Weather updates: Sends real-time weather conditions and
alerts to your device.‍
Deleting History
1 From the home screen, select
2 Select an option:
> Delete.‍
• Select All Rides to delete all saved activities from the
history.‍
• Select Old Rides to delete activities recorded more than
one month ago.‍
• Select All Totals to reset all distance and time totals.‍
NOTE: This does not delete any saved activities.‍
8
Recording > Record To.‍
2 Select an option:
• Select Internal Storage to save your data to the device
memory.‍
• Select Memory Card to save your data to an optional
memory card.‍
Installing a Memory Card
You can install a microSD™ memory card for additional storage
or pre-loaded maps.‍
1 Pull up the weather cap À from the microSD card slot Á.‍
2 Press in the card until it clicks.‍
Data Management
NOTE: The device is not compatible with Windows® 95, 98,
Me, Windows NT®, and Mac® OS 10.‍3 and earlier.‍
Connecting the Device to Your Computer
NOTICE
To prevent corrosion, thoroughly dry the mini-USB port, the
weather cap, and the surrounding area before charging or
connecting to a computer.‍
1 Pull up the weather cap from the mini-USB port.‍
2 Plug the small end of the USB cable into the mini-USB port.‍
3 Plug the large end of the USB cable into a computer USB
port.‍
Your device and memory card (optional) appear as
removable drives in My Computer on Windows computers
and as mounted volumes on Mac computers.‍
History
D
d
de
.‍
m
• Select Locations to navigate to a saved location.‍
• Select Recent Finds to navigate to one of the last 50
locations you have found.‍
• Select Coordinates to navigate to known coordinates.‍
• Select All POIs (requires routable maps) to navigate to a
point of interest.‍
• Select Addresses (requires routable maps) to navigate to
a specific address.‍
• Select Intersections to navigate to the intersection of two
streets.‍
• Select Cities to navigate to a city.‍
• Select to narrow your search.‍
If necessary, select
to enter specific search information
(optional for locations, POIs, and cities only).‍
Select a location.‍
Select RIDE.‍
Follow the on-screen instructions to your destination.‍
e
.b
re
or
nb
de
an
.v
w
w
w
Open the Garmin drive or volume.‍
If necessary, open a folder or volume.‍
Select a file.‍
Press the Delete key on your keyboard.‍
>
fro
1
2
3
4
to save the location.‍
Navigating to a Location
1 From the home screen, select
2 Select an option:
Deleting Files
NOTICE
If you do not know the purpose of a file, do not delete it.‍ Your
device memory contains important system files that should not
be deleted.‍
>
oa
2
3
4
5
6
Your device and memory card (optional) appear as
removable drives in My Computer on Windows computers
and as mounted volumes on Mac computers.‍
NOTE: Some computers with multiple network drives cannot
display device drives.‍ See your operating system help file to
learn how to map the drive.‍
On your computer, open the file browser.‍
Select a file.‍
Select Edit > Copy.‍
Open the Garmin or memory card drive or volume.‍
Select Edit > Paste.‍
The file appears in the list of files in the device memory or on
the memory card.‍
5 Select
nl
ow
Transferring Files to Your Device
1 Connect the device to your computer (page 8).‍
3
4
5
6
Disconnecting the USB Cable
If your device is connected to your computer as a removable
drive or volume, you must safely disconnect your device from
your computer to avoid data loss.‍ If your device is connected to
your Windows computer as a portable device, it is not
necessary to safely disconnect.‍
1 Complete an action:
• For Windows computers, select the Safely Remove
Hardware icon in the system tray, and select your device.‍
• For Mac computers, drag the volume icon to the trash.‍
2 Disconnect the cable from your computer.‍
Navigation
This section describes navigation features and settings.‍
Navigation settings also apply to navigating courses (page 4).‍
• Locations and finding places (page 9)
• Route settings (page 10)
• Optional maps (page 10)
• Map settings (page 10)
Locations
You can record and store locations in the device.‍
Saving Your Location
You can save your present location, such as your home or
parking spot.‍
From the home screen, select > System > GPS > Mark
Location > .‍
Saving Locations from the Map
1 From the home screen, select >
2 Browse the map for the location.‍
3 Select the location on the map.‍
.‍
Location information appears at the top of the map.‍
4 Select the information bar at the top of the screen.‍
Navigation
Navigating to Known Coordinates
1 From the home screen, select > > Coordinates.‍
2 Enter the coordinates, and select .‍
3 Follow the on-screen directions to your destination.‍
Navigating Back to Start
At any point during your ride, you can return to the starting
point.‍
1 Go for a ride (page 3).‍
2 During your ride, tap the screen to view the timer overlay.‍
3 Select > Back to Start > RIDE.‍
The device navigates you back to the starting point of your
ride.‍
Stopping Navigation
1 Tap the screen to view the timer overlay.‍
2 Select > Where To > Stop Navigation.‍
Projecting a Location
You can create a new location by projecting the distance and
bearing from a marked location to a new location.‍
1 From the home screen, select > > Locations.‍
2 Select a location.‍
3 Select the information bar at the top of the screen.‍
4 Select > Project Waypoint.‍
5 Enter the bearing and distance to the projected location.‍
9
D
>
d
de
.‍
fro
TIP: If you know the name of the business, select All POIs >
to enter the name.‍
3 If necessary, select a subcategory.‍
4 Select the location, and select RIDE.‍
m
an
.v
w
w
w
Editing Locations
1 From the home screen, select > > Locations.‍
2 Select a location.‍
3 Select the information bar at the top of the screen.‍
4 Select .‍
5 Select an attribute.‍
Finding a Point of Interest
1 From the home screen, select
2 Select a category.‍
oa
.‍
nl
ow
6 Select
Finding Nearby Locations
1 From the home screen, select
2 Select an option.‍
Deleting Locations
1 From the home screen, select > > Locations.‍
2 Select a location.‍
3 Select the information bar at the top of the screen.‍
4 Select > Delete Waypoint > .‍
For example, select A Recent Find to search for a
restaurant near the address you recently searched for.‍
If necessary, select a category and subcategory.‍
3
4 Select the location, and select RIDE.‍
You can set the device to calculate the route based on activity
type.‍
1 Select > Activity Profiles.‍
2 Select a profile.‍
3 Select Navigation > Routing > Activity.‍
4 Select an option to calculate your route.‍
For example, Tour Cycling or Mountain Biking.‍
Purchasing Additional Maps
Before purchasing additional maps, you should determine the
version of the maps that are loaded on your device.‍
1 From the home screen, select > Activity Profiles.‍
2 Select a profile.‍
3 Select Navigation > Map > Map Information.‍
4 Select a map.‍
5 Select .‍
6 Go to http:​/‍​/‍buy​.garmin​.com, or contact your Garmin dealer.‍
Finding an Address
You can use optional City Navigator® maps to search for
addresses, cities, and other locations.‍ The detailed and routable
maps contain millions of points of interest, such as restaurants,
hotels, and auto services.‍
1 From the home screen, select > > Addresses.‍
2 Follow the on-screen instructions.‍
TIP: If you are unsure of the city, select Search All.‍
3 Select the address, and select RIDE.‍
10
e
Selecting an Activity for Route Calculation
.‍
.b
re
Select > Activity Profiles, select a profile, and select
Navigation > Routing.‍
Activity: Allows you to select an activity for the device to
calculate your route (page 10).‍
Calculation Method: Allows you to select the calculation
method to optimize your route.‍
Lock On Road (requires routable maps): Locks the position
icon, which represents your position on the map, onto the
nearest road.‍
Avoidance Setup (requires routable maps): Allows you to
select the road type you want to avoid.‍
Recalculation (requires routable maps): Allows you to select
the recalculation method when you deviate from the route.‍
>
or
Route Settings
>
nb
de
For example, select Change Elevation to enter a known
altitude for the location.‍
6 Enter the new information, and select .‍
Topographical Maps
Your device may include topographical maps or you can
purchase them from http:​/‍​/‍buy​.garmin​.com.‍ Garmin
recommends that you download BaseCamp™ to plan your
routes and activities using topographical maps.‍
Map Settings
Select > Activity Profiles, select a profile, and select
Navigation > Map.‍
Orientation: Adjusts how the map is shown on the page
(page 10).‍
Auto Zoom: Automatically selects the appropriate zoom level
for optimal use on your map.‍ When Off is selected, you must
zoom in or out manually.‍
Guide Text: Sets when the turn-by-turn navigation prompts are
shown.‍
Map Visibility: Allows you to set advanced map features
(page 10).‍
Map Information: Enables or disables the maps currently
loaded on the device.‍
Advanced Map Settings
Select > Activity Profiles, select a profile, and select
Navigation > Map > Map Visibility.‍
Map Visibility Mode: Auto and High Contrast have preset
values.‍ You can choose Custom to set each value.‍
Zoom Levels: Sets map items to draw or appear at or below
the selected zoom level.‍
Text Size: Sets the text size for map items.‍
Detail: Sets the amount of detail shown on the map.‍ Showing
more detail may cause the map to redraw more slowly.‍
Shaded Relief: Shows detail relief on the map (if available) or
turns off shading.‍
Changing the Map Orientation
1 Select > Activity Profiles.‍
2 Select a profile.‍
3 Select Navigation > Map > Orientation.‍
4 Select an option:
• Select North Up to show north at the top of the page.‍
• Select Track Up to show your current direction of travel at
the top of the page.‍
• Select Automobile Driving to show an automotive
perspective with the direction of travel at the top.‍
Navigation
D
Setting Up Your User Profile
an
.v
w
w
w
You can update your gender, age, weight, height, and lifetime
athlete settings.‍ The device uses this information to calculate
accurate ride data.‍
1 From the home screen, select > User Profile.‍
2 Select an option.‍
e
.b
re
or
nb
de
Customizing Your Device
m
Updating Your Activity Profile
You can customize five activity profiles.‍ You can customize your
settings and data fields for a particular activity or trip.‍
1 From the home screen, select > Activity Profiles.‍
2 Select an option:
• Select a profile.‍
• Select to add a new profile.‍
3 If necessary, edit the name and background image for the
profile.‍
4 Select an option:
• Select Training Pages to customize the data pages and
data fields (page 11).‍
• Select Alerts to customize your training alerts (page 3).‍
• Select Auto Pause to change when the timer
automatically pauses (page 11).‍
fro
You can customize 10 bike profiles.‍ The device uses the bike
weight, odometer value, wheel size, and crank length to
calculate accurate ride data.‍
1 From the home screen, select > Bike Profiles.‍
2 Select an option:
• Select a profile.‍
• Select to add a new profile.‍
3 Select the name of the bike.‍
4 If necessary, edit the name, color, and image for the profile.‍
5 If you are using a speed and cadence sensor or power
sensor, select an option:
• Select Wheel Size > Automatic to calculate your wheel
size using GPS distance.‍
• Select Wheel Size > Custom to enter your wheel size.‍
For a table of wheel sizes and circumferences, see
page 16.‍
• Select Crank Length > Automatic to calculate your
crank length using GPS distance.‍
• Select Crank Length > Custom to enter your crank
length.‍
Any changes you make are saved to the active profile.‍
d
de
Updating Your Bike Profile
• Select Auto Lap to set how laps are triggered
(page 12).‍
• Select Auto Scroll to customize the display of the training
data pages when the timer is running (page 12).‍
• Select Navigation to customize your map (page 10) and
route (page 10) settings.‍
Any changes you make are saved to the active profile.‍
oa
Profiles
The Edge has several ways for you to customize the device
including profiles.‍ Profiles are a collection of settings that
optimize your device based on how you are using it.‍ For
example, you can create different settings and views for training
and mountain biking.‍
When you are using a profile and you change settings such as
data fields or units of measurement, the changes are saved
automatically as part of the profile.‍
Bike Profiles: You can create bike profiles for each bike you
own.‍ The bike profile includes optional ANT‍+ sensors, bike
weight, wheel size, odometer value, and crank length.‍
Activity Profiles: You can create activity profiles for each type
of biking.‍ For example, you can have a profile for training,
racing, and mountain biking.‍ The activity profile includes
customized data pages, alerts, training zones (such as heart
rate and speed), training settings (such as Auto Pause and
Auto Lap), and navigation settings.‍
User Profile: You can update your gender, age, weight, height,
and lifetime athlete settings.‍ The device uses this information
to calculate accurate ride data.‍
nl
ow
Customizing Your Device
About Lifetime Athletes
A lifetime athlete is an individual who has trained intensely for
many years (with the exception of minor injuries) and has a
resting heart rate of 60 beats per minute (bpm) or less.‍
Bluetooth Settings
Select > Bluetooth.‍
Enable: Enables Bluetooth wireless technology.‍
NOTE: Other Bluetooth settings appear only when Bluetooth
is enabled.‍
Friendly Name: Allows you to enter a friendly name that
identifies your devices with Bluetooth wireless technology.‍
Pair Smartphone: Connects your device with a compatible
Bluetooth-enabled smartphone.‍
About Training Settings
The following options and settings allow you to customize your
device based on your training needs.‍ These settings are saved
to an activity profile.‍ For example, you can set time alerts for
your racing profile and you can set an Auto Lap® position
trigger for your mountain biking profile.‍
Customizing the Data Pages
You can customize data pages for each activity profile
(page 11).‍
1 From the home screen, select > Activity Profiles.‍
2 Select a profile.‍
3 Select Training Pages.‍
4 Select a data page.‍
5 If necessary, enable the data page.‍
6 Select the number of data fields you want to see on the
page.‍
7 Select .‍
8 Select a data field to change it.‍
9 Select .‍
Using Auto Pause
You can use Auto Pause® to pause the timer automatically
when you stop moving or when your speed drops below a
specified value.‍ This feature is helpful if your ride includes stop
lights or other places where you need to slow down or stop.‍
NOTE: History is not recorded while the timer is stopped or
paused.‍
1 From the home screen, select > Activity Profiles.‍
2 Select a profile.‍
3 Select Auto Pause > Auto Pause Mode.‍
4 Select an option:
• Select When Stopped to pause the timer automatically
when you stop moving.‍
11
D
e
.b
re
12
or
System Settings
Select > System.‍
• GPS Settings (page 12)
Training Indoors
You can turn GPS off when you are training indoors or to save
battery life.‍
From the home screen, select > System > GPS > GPS
Mode > Off.‍
When GPS is off, speed and distance are not available unless
you have an optional sensor that sends speed and distance
data to the device (such as the GSC 10).‍ The next time you turn
on the device, it will search for satellite signals again.‍
nb
de
This feature automatically detects when your device has
acquired satellites and is moving.‍ It is a reminder to start the
timer so you can record your ride data.‍
1 From the home screen, select > Activity Profiles.‍
2 Select a profile.‍
3 Select Start Notice > Start Notice Mode.‍
4 Select an option:
• Select Once.‍
• Select Repeat > Repeat Delay to change the amount of
time to delay the reminder.‍
an
.v
Changing the Start Notice
w
w
You can use the auto scroll feature to automatically cycle
through all of the training data pages while the timer is running.‍
1 From the home screen, select > Activity Profiles.‍
2 Select a profile.‍
3 Select Auto Scroll > Auto Scroll Speed.‍
4 Select a display speed.‍
w
Using Auto Scroll
GPS Settings
m
You can use Auto Lap to automatically mark the lap at a specific
distance.‍ This feature is helpful for comparing your performance
over different parts of a ride (for example, every 10 miles or 40
kilometers).‍
1 From the home screen, select > Activity Profiles.‍
2 Select a profile.‍
3 Select Auto Lap > Auto Lap Trigger > By Distance > Lap
At.‍
4 Enter a value.‍
5 If necessary, customize the lap data fields (page 11).‍
fro
Marking Laps by Distance
d
de
You can use Auto Lap to automatically mark the lap at a specific
position.‍ This feature is helpful for comparing your performance
over different parts of a ride (for example, a long climb or
training sprints).‍ During courses, use the By Position option to
trigger laps at all of the lap positions saved in the course.‍
1 From the home screen, select > Activity Profiles.‍
2 Select a profile.‍
3 Select Auto Lap > Auto Lap Trigger > By Position > Lap
At.‍
4 Select an option:
• Select Lap Press Only to trigger the lap counter each
time you select
and each time you pass any of those
locations again.‍
• Select Start and Lap to trigger the lap counter at the GPS
location where you select
and at any location during
the ride where you select
.‍
• Select Mark and Lap to trigger the lap counter at a
specific GPS location marked before the ride and at any
location during the ride where you select
.‍
5 If necessary, customize the lap data fields (page 11).‍
Display Settings (page 12)
Data Recording Settings (page 12)
Unit Settings (page 12)
Configuration Settings (page 13)
Language Settings (page 13)
Tone Settings (page 13)
oa
Marking Laps by Position
•
•
•
•
•
•
nl
ow
• Select Custom Speed to pause the timer automatically
when your speed drops below a specified value.‍
5 If necessary, customize optional time data fields (page 11).‍
The Time - Elapsed data field displays the entire time
including paused time.‍
Setting Your Elevation
If you have accurate elevation data for your present location,
you can manually calibrate the altimeter on your device.‍
1 From the home screen, select > System > GPS > Set
Elevation.‍
2 Enter the elevation, and select .‍
Viewing Satellites
The satellite page shows your current GPS satellite information.‍
For more information about GPS, go to www.garmin.com
/‍aboutGPS.‍
From the home screen, select > System > GPS > View
Satellites.‍
GPS accuracy appears at the bottom of the page.‍ The green
bars represent the strength of each satellite signal received (the
number of the satellite appears below each bar).‍
Display Settings
Select > System > Display.‍
Backlight Timeout: Adjusts the length of time before the
backlight turns off (page 2).‍
Color Mode: Sets the device to display day or night colors.‍ You
can select Auto to allow the device to automatically set day
or night colors based on the time of day.‍
Screen Capture: Allows you to save the image on the device
screen.‍
Calibrate Screen: Aligns the screen to properly respond to
touches (page 14).‍
Data Recording Settings
Select > System > Data Recording.‍
Record To: Sets the data storage location (page 8).‍
Recording Interval: Controls how the device records activity
data.‍ Smart records key points where you change direction,
speed, or heart rate.‍ 1 Sec.‍ records points every second.‍ It
creates a very detailed record of your activity and increases
the size of the activity.‍
Data Averaging: Controls whether the device includes zero
values for cadence and power data that occur when you are
not pedaling (page 6).‍
Changing the Units of Measure
You can customize units of measure for distance and speed,
elevation, temperature, weight, position format, and time format.‍
1 Select > System > Units.‍
2 Select a measurement type.‍
3 Select a unit of measure for the setting.‍
Customizing Your Device
D
NOTICE
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.‍
Never use a hard or sharp object to operate the touch screen,
or damage may result.‍
Avoid chemical cleaners and solvents that can damage plastic
components.‍
Secure the weather cap tightly to prevent damage to the miniUSB port.‍
Time Zones
Device Information
Specifications
Cleaning the Device
1 Wipe the device with a cloth dampened with a mild detergent
Edge Specifications
2 Wipe it dry.‍
Battery type
1100 mAh rechargable, built-in lithium-ion
battery
Caring for the Heart Rate Monitor
Battery life
15 hours, typical usage
Optional external
battery (accessory)
20 hours, typical usage
Water resistance
IPX7
NOTICE
You must unsnap the module before cleaning the strap.‍
A build up of sweat and salt on the strap can decrease the
ability of the heart rate monitor to report accurate data.‍
solution.‍
Operating temperature From -4º to 140ºF (from -20º to 60ºC)
range
Charging temperature
range
From 32º to 113ºF (from 0º to 45ºC )
Bands (O-rings) for the Two sizes:
standard mount
• 1.‍3 × 1.‍5 × 0.‍9 in.‍ AS568-125
• 1.‍7 × 1.‍9 × 0.‍9 in.‍ AS568-131
NOTE: Use Ethylene Propylene Diene
Monomer (EPDM) replacement bands only.‍
Go to http:​/‍​/‍buy​.garmin​.com, or contact your
Garmin dealer.‍
About IPX7
NOTICE
The device is water resistant to IEC Standard 60529 IPX7.‍ It
can withstand immersion in 1 meter of water for 30 minutes.‍
Prolonged submersion can cause damage to the device.‍ After
submersion, be certain to wipe dry and air dry the device before
using or charging.‍
Heart Rate Monitor Specifications
Battery type
User-replaceable CR2032, 3 volts
Battery life
Up to 4.‍5 years (1 hour per day).‍ When the
battery is low, a message appears on your
compatible Garmin device.‍
Water resistance
Water resistant to 98.‍4 ft.‍ (30 m)
NOTE: This product does not transmit heart rate
data while swimming.‍
Operating
temperature range
From 23° to 122°F (from -5° to 50°C)
Radio frequency/
protocol
2.‍4 GHz ANT‍+ wireless communications protocol
GSC 10 Specifications
Battery type
User-replaceable CR2032, 3 volts
Battery life
Approximately 1.‍4 years (1 hour per day)
Water resistance
IPX7
Device Information
e
Each time you turn on the device and acquire satellites, the
device automatically detects your time zone and the current
time of day.‍
.b
re
or
nb
de
an
.v
> System > Tones.‍
w
w
From the home screen, select
w
Setting the Device Tones
Device Care
m
> System > Language.‍
Radio frequency/protocol 2.‍4 GHz ANT‍+ wireless communications
protocol
fro
From the home screen, select
From 5º to 158ºF (from -15º to 70ºC)
d
de
Changing the Device Language
Operating temperature
range
oa
You can modify all of the settings you configured in the initial
setup.‍
1 Select > System > Device Reset > Initial Setup.‍
2 Follow the on-screen instructions.‍
nl
ow
Changing the Configuration Settings
• Go to www.garmin.com/‍HRMcare for detailed washing
instructions.‍
• Rinse the strap after every use.‍
• Machine wash the strap after every seven uses.‍
• Do not put the strap in a dryer.‍
• To prolong the life of your heart rate monitor, unsnap the
module when not in use.‍
Heart Rate Monitor Battery
WARNING
Do not use a sharp object to remove user-replaceable batteries.‍
Contact your local waste disposal department to properly
recycle the batteries.‍ Perchlorate Material – special handling
may apply.‍ Go to www.dtsc.ca.gov/‍hazardouswaste
/‍perchlorate.‍
Replacing the Heart Rate Monitor Battery
1 Use a small Phillips screwdriver to remove the four screws
on the back of the module.‍
2 Remove the cover and battery.‍
3 Wait 30 seconds.‍
4 Insert the new battery with the positive side facing up.‍
NOTE: Do not damage or lose the O-ring gasket.‍
5 Replace the back cover and the four screws.‍
13
D
m
fro
Using the Auto Power Down Feature
w
w
w
10.‍
You can decrease the backlight timeout to maximize the battery
life.‍
1 Select > Backlight Timeout.‍
2 Select an option.‍
d
de
1 Locate the circular battery cover À on the side of the GSC
Adjusting the Backlight Timeout
oa
Replacing the GSC 10 Battery
nl
ow
After you replace the heart rate monitor battery, you must pair it
with the device again.‍
Calibrating the Touchscreen
1 From the home screen, select
> System > Display >
Calibrate Screen.‍
2 Follow the on-screen instructions.‍
e
.b
re
or
nb
de
an
.v
This feature automatically turns off the device after 15 minutes
of inactivity.‍
1 Select > System > Auto Power Down.‍
2 Select On.‍
Locking the Touchscreen
2 Use a coin to twist the cover counter-clockwise until it is
loose enough to remove (the arrow points to unlocked).‍
3 Remove the cover and the battery Á.‍
4 Wait 30 seconds.‍
5 Insert the new battery with the positive side facing up.‍
NOTE: Do not damage or lose the O-ring gasket.‍
6 Use a coin to twist the cover clockwise back into place (the
arrow points to locked).‍
After you replace the GSC 10 battery, you must pair the GSC
10 with the device again.‍
Troubleshooting
You can lock the screen to prevent inadvertent screen touches.‍
1 Select .‍
2 Select .‍
Unlocking the Touchscreen
1 Select .‍
2 Select .‍
Getting More Information
You can find more information about this product on the Garmin
website.‍
• Go to www.garmin.com/‍intosports.‍
• Go to www.garmin.com/‍learningcenter.‍
• Go to http:​/‍​/‍buy​.garmin​.com, or contact your Garmin dealer
for information about optional accessories and replacement
parts.‍
Resetting the Device
Temperature Readings
If the device stops responding, you may need to reset it.‍ This
does not erase any of your data or settings.‍
1 Hold for 10 seconds.‍
2 Hold for one second to turn on the device.‍
The device may display temperature readings that are higher
than the actual air temperature if the device is placed in direct
sunlight, held in your hand, or is charging with an external
battery pack.‍ Also, the device will take some time to adjust to
significant changes in temperature.‍
Clearing User Data
You can restore all of the device settings to the factory default
values.‍
NOTE: This deletes all user-entered information, but it does not
delete your history.‍
1 Turn off the device.‍
2 Place your finger on the top left corner of the touchscreen.‍
3 While holding your finger on the touchscreen, turn on the
device.‍
4 Select .‍
Maximizing Battery Life
•
•
•
•
Decrease the backlight (page 14).‍
Shorten the backlight timeout (page 14).‍
Select the Smart recording interval (page 12).‍
Turn on the Auto Power Down feature (page 14).‍
• Turn off the Bluetooth wireless feature (page 11).‍
Decreasing the Backlight
1 Select to open the status page.‍
2 Use and to adjust the brightness.‍
14
Viewing Device Information
You can view the unit ID, software version, and license
agreement.‍
From the home screen, select > System > About.‍
Updating the Software
NOTE: Updating the software does not erase any of your data
or settings.‍
1 Connect your device to a computer using the USB cable.‍
2 Go to www.garmin.com/‍products​/‍webupdater.‍
3 Follow the on-screen instructions.‍
Appendix
Registering Your Device
Help us better support you by completing our online registration
today.‍
• Go to http:​/‍​/‍my​.garmin​.com.‍
• Keep the original sales receipt, or a photocopy, in a safe
place.‍
Troubleshooting
D
d
de
m
fro
e
.b
re
or
nb
de
an
.v
w
w
w
Appendix
HR - Avg.‍ %Max.‍: The average percentage of maximum heart
rate for the current activity.‍
HR - Lap: The average heart rate for the current lap.‍
HR - Lap %HRR: The average percentage of heart rate reserve
(maximum heart rate minus resting heart rate) for the current
lap.‍
HR - Lap %Max.‍: The average percentage of maximum heart
rate for the current lap.‍
HR - Last Lap: The average heart rate for the last completed
lap.‍
HR to Go: During a workout, the amount you are above or
below the heart rate target.‍
HR Zone: The current range of heart rate (1 to 5).‍ The default
zones are based on your user profile, maximum heart rate,
and resting heart rate.‍
Laps: The number of laps completed for the current activity.‍
Location at Dest.‍: The last point on the route or course.‍
Location at Next: The next point on the route or course.‍
Odometer: A running tally of distance traveled for all trips.‍ This
total does not clear when resetting the trip data.‍
Power: The current power output in watts.‍
Power - %FTP: The current power output as a percentage of
functional threshold power.‍
Power - 10s Avg.‍: The 10-second moving average of power
output.‍
Power - 30s Avg.‍: The 30-second moving average of power
output.‍
Power - 3s Avg.‍: The three-second moving average of power
output.‍
Power - Avg.‍: The average power output for the current activity.‍
Power - IF: The Intensity Factor™ for the current activity.‍
Power - kj: The accumulated work performed (power output) in
kilojoules.‍
Power - Lap: The average power output for the current lap.‍
Power - Last Lap: The average power output for the last
completed lap.‍
Power - Max.‍: The top power output for the current activity.‍
Power - NP: The Normalized Power™ for the current activity.‍
Power - NP Lap: The average Normalized Power for the
current lap.‍
Power - NP Last Lap: The average Normalized Power for the
last completed lap.‍
Power - TSS: The Training Stress Score™ for the current
activity.‍
Power - Watts/kg: The amount of power output in watts per
kilogram.‍
Power Zone: The current range of power output (1 to 7) based
on your FTP or custom settings.‍
Reps to Go: During a workout, the remaining repetitions.‍
Speed: The current rate of travel.‍
Speed - Avg.‍: The average speed for the current activity.‍
Speed - Lap: The average speed for the current lap.‍
Speed - Last Lap: The average speed for the last completed
lap.‍
Speed - Max.‍: The top speed for the current activity.‍
Speed Zone: The current range of speed (1 to 10).‍ Zones can
be set in Garmin Connect.‍
Sunrise: The time of sunrise based on your GPS position.‍
Sunset: The time of sunset based on your GPS position.‍
oa
Some data fields require ANT‍+ accessories to display data.‍
Balance: The current left/right power balance.‍
Balance - 10s Avg.‍: The 10-second moving average of the left/
right power balance.‍
Balance - 30s Avg.‍: The 30-second moving average of the left/
right power balance.‍
Balance - 3s Avg.‍: The three-second moving average of the
left/right power balance.‍
Balance - Avg.‍: The average left/right power balance for the
current activity.‍
Balance - Lap: The average left/right power balance for the
current lap.‍
Battery Level: The remaining battery power.‍
Cadence: The revolutions of the crank arm or strides per
minute.‍ Your device must be connected to a cadence
accessory.‍
Cadence - Avg.‍: The average cadence for the current activity.‍
Cadence - Lap: The average cadence for the current lap.‍
Calories: The amount of total calories burned.‍
Calories - Fat: The amount of fat calories burned.‍ Requires a
New Leaf® assessment.‍
Calories to Go: During a workout, the remaining calories when
you are using a calorie target.‍
Course Pt.‍ Dist.‍: The remaining distance to the next point on
the course.‍
Dist.‍ - Lap: The distance traveled for the current lap.‍
Dist.‍ - Last Lap: The distance traveled for the last completed
lap.‍
Dist.‍ to Dest.‍: The remaining distance to the final destination.‍
You must be navigating for this data to appear.‍
Dist.‍ to Go: During a workout or course, the remaining distance
when you are using a distance target.‍
Dist.‍ to Next: The remaining distance to the next waypoint on
the route.‍ You must be navigating for this data to appear.‍
Distance: The distance traveled for the current track or activity.‍
Elevation: The altitude of your current location above or below
sea level.‍
ETA at Destination: The estimated time of day you will reach
the final destination (adjusted to the local time of the
destination).‍ You must be navigating for this data to appear.‍
ETA at Next: The estimated time of day you will reach the next
waypoint on the route (adjusted to the local time of the
waypoint).‍ You must be navigating for this data to appear.‍
GPS Accuracy: The margin of error for your exact location.‍ For
example, your GPS location is accurate to within +/- 12 feet
(3.‍65 m).‍
GPS Signal Strength: The strength of the GPS satellite signal.‍
Grade: The calculation of rise (elevation) over run (distance).‍
For example, if for every 10 feet (3 m) you climb you travel
200 feet (60 m), the grade is 5%.‍
Heading: The direction you are moving.‍
Heart Rate: Your heart rate in beats per minute (bpm).‍ Your
device must be connected to a compatible heart rate
monitor.‍
HR - %HRR: The percentage of heart rate reserve (maximum
heart rate minus resting heart rate).‍
HR - %Max.‍: The percentage of maximum heart rate.‍
HR - Avg.‍: The average heart rate for the current activity.‍
HR - Avg.‍ %HRR: The average percentage of heart rate
reserve (maximum heart rate minus resting heart rate) for the
current activity.‍
nl
ow
Data Fields
15
D
90–100%
Moderate pace, more
difficult to hold
conversation
Improved aerobic
capacity, optimal
cardiovascular training
Fast pace and a bit
uncomfortable,
breathing forceful
Improved anaerobic
capacity and
threshold, improved
speed
Sprinting pace,
unsustainable for long
period of time, labored
breathing
Anaerobic and
muscular endurance,
increased power
Wheel Size and Circumference
The wheel size is marked on both sides of the tire.‍ This is not a
comprehensive list.‍ You can also use one of the calculators
available on the Internet.‍
To modify your bike profile, see page 11.‍
Wheel Size
L (mm)
12 × 1.‍75
935
14 × 1.‍5
1020
14 × 1.‍75
1055
16
1753
24 × 3/4 Tubular
1785
24 × 1-1/8
1795
24 × 1-1/4
1905
24 × 1.‍75
1890
24 × 2.‍00
1925
24 × 2.‍125
1965
26 × 7/8
1920
26 × 1(59)
1913
26 × 1(65)
1952
26 × 1.‍25
1953
26 × 1-1/8
1970
26 × 1-3/8
2068
26 × 1-1/2
2100
26 × 1.‍40
2005
26 × 1.‍50
2010
26 × 1.‍75
2023
26 × 1.‍95
2050
26 × 2.‍00
2055
26 × 2.‍10
2068
26 × 2.‍125
2070
26 × 2.‍35
2083
26 × 3.‍00
2170
27 × 1
2145
27 × 1-1/8
2155
27 × 1-1/4
2161
27 × 1-3/8
2169
650 × 35A
2090
650 × 38A
2125
650 × 38B
2105
700 × 18C
2070
700 × 19C
2080
700 × 20C
2086
700 × 23C
2096
700 × 25C
2105
700 × 28C
2136
700 × 30C
2170
700 × 32C
2155
700C Tubular
2130
700 × 35C
2168
700 × 38C
2180
700 × 40C
2200
e
5
80–90%
Basic cardiovascular
training, good
recovery pace
1785
24 × 1
.b
re
4
70–80%
Comfortable pace,
slightly deeper
breathing, conversation
possible
1770
22 × 1-1/2
or
3
60–70%
1615
22 × 1-3/8
nb
de
2
1515
20 × 1-3/8
an
.v
Beginning-level
aerobic training,
reduces stress
1350
w
w
Relaxed, easy pace,
rhythmic breathing
50–60%
20 × 1.‍75
1340
w
1
18 × 1.‍75
1195
m
Benefits
18 × 1.‍5
1185
fro
Perceived Exertion
16 × 1.‍75
d
de
Zone % of
Maximum
Heart Rate
16 × 1.‍5
L (mm)
oa
Heart Rate Zone Calculations
Wheel Size
nl
ow
Temperature: The temperature of the air.‍ Your body
temperature affects the temperature sensor.‍
Time: The stopwatch time for the current activity.‍
Time - Avg.‍ Lap: The average lap time for the current activity.‍
Time - Elapsed: The total time recorded.‍ For example, if you
start the timer and run for 10 minutes, then stop the timer for
5 minutes, then start the timer and run for 20 minutes, your
elapsed time is 35 minutes.‍
Time - Lap: The stopwatch time for the current lap.‍
Time - Last Lap: The stopwatch time for the last completed lap.‍
Time of Day: The current time of day based on your current
location and time settings (format, time zone, daylight saving
time).‍
Time to Dest.‍: The estimated time remaining before you reach
the destination.‍ You must be navigating for this data to
appear.‍
Time to Go: During a workout, the remaining time when you are
using a time target.‍
Time to Next: The estimated time remaining before you reach
the next waypoint in the route.‍ You must be navigating for
this data to appear.‍
Time to Sunrise: The estimated time remaining before sunrise.‍
Time to Sunset: The estimated time remaining before sunset.‍
Total Ascent: The total elevation distance ascended since the
last reset.‍
Total Descent: The total elevation distance descended since
the last reset.‍
Vertical Speed: The rate of ascent or descent over time.‍
VS - 30S Avg.‍: The 30-second moving average of vertical
speed.‍
Software License Agreement
BY USING THE DEVICE, YOU AGREE TO BE BOUND BY
THE TERMS AND CONDITIONS OF THE FOLLOWING
SOFTWARE LICENSE AGREEMENT.‍ PLEASE READ THIS
AGREEMENT CAREFULLY.‍
Garmin Ltd.‍ and its subsidiaries (“Garmin”) grant you a limited
license to use the software embedded in this device (the
Appendix
D
oa
d
de
m
fro
e
.b
re
or
nb
de
an
.v
w
w
w
Appendix
nl
ow
“Software”) in binary executable form in the normal operation of
the product.‍ Title, ownership rights, and intellectual property
rights in and to the Software remain in Garmin and/or its thirdparty providers.‍
You acknowledge that the Software is the property of Garmin
and/or its third-party providers and is protected under the United
States of America copyright laws and international copyright
treaties.‍ You further acknowledge that the structure,
organization, and code of the Software, for which source code is
not provided, are valuable trade secrets of Garmin and/or its
third-party providers and that the Software in source code form
remains a valuable trade secret of Garmin and/or its third-party
providers.‍ You agree not to decompile, disassemble, modify,
reverse assemble, reverse engineer, or reduce to human
readable form the Software or any part thereof or create any
derivative works based on the Software.‍ You agree not to
export or re-export the Software to any country in violation of
the export control laws of the United States of America or the
export control laws of any other applicable country.‍
17
D
R
Garmin Connect 3, 7
storing data 8
GPS
satellite page 12
signal 2
stopping 12
GSC 10 6, 13, 14
S
18
V
Virtual Partner 4, 5
W
Z
G
F
unit ID 14
units of measure 12
updating software 14
USB, disconnecting 9
user data, deleting 9
user profile 2, 11
P
O
files, transferring 9
finding locations 10
addresses 10
near your location 10
E
U
O-rings (bands) 13
on-screen buttons 2
navigation 9
back to start 9
stopping 9
pairing 2
heart rate monitor 7
pairing ANT‍+ sensors 7
personal records 5, 8
restoring 5
points of interest (POI) 10
finding 9
power
alerts 3
zones 7
power meter 6, 7
power meters 7
power save 14
product registration 14
profiles 11
bike 11
user 11
elevation 12
T
temperature 14
time, alerts 3
time settings 13
time zones 13
timer 2, 3, 7
tones 13
topographical maps 10
touchscreen, calibrating 14
training pages, viewing 3
troubleshooting 14
water resistance 13
waypoints, projecting 9
weight scale 7
wheel sizes 16
workouts 3, 4
creating 3, 4
deleting 4
editing 4
loading 3
N
e
maps 4
finding locations 9
orientation 10
purchasing 10
settings 10
topographical 10
zoom 10
memory card 8
microSD card. See memory card
mounting the device 1
.b
re
M
or
data
storing 8
transferring 7, 8
data averaging 6
data fields 11, 15
data recording 8, 12
deleting
all user data 9, 14
history 8
device
care 13
registration 14
resetting 14
display settings 12
distance, alerts 3
language 13
laps 2
lifetime athlete 11
locations 9
deleting 10
editing 10
finding with the map 9
searching for 10
locking, screen 14
nb
de
D
L
an
.v
C
cadence 6
alerts 3
calibrating
power meter 7
touchscreen 14
calorie, alerts 3
charging the device 1
cleaning the device 13
computer, connecting 8
coordinates 9
courses 4, 5
deleting 5
editing 4, 5
loading 4
customizing the device 11
keys 2
w
w
K
w
B
back to start 9
backlight 2, 12, 14
battery
charging 1
maximizing 14
replacing 13
type 1
Bluetooth technology 8, 11
brightness 14
I
m
icons 2
initial setup 13
installing 1, 6
fro
accessories 5, 7, 14
addresses, finding 9
alerts 3
altimeter, calibrating 12
ANT‍+ sensors 2
pairing 7
ANT+ sensors 5
applications 8
Auto Lap 12
Auto Pause 11
auto scroll 12
screen. 12 See also backlight
brightness 14
locking 14
settings 2, 10–13
device 13
smart recording 8
smartphone 2, 8, 11
software
updating 14
version 14
software license agreement 14, 16
specifications 13
speed, zones 5
start notice message 12
storing data 7, 8
system settings 12
d
de
heart rate
alerts 3
monitor 5
zones 5, 6, 16
heart rate monitor 13
pairing 7
history 3, 7
deleting 8
sending to computer 7, 8
oa
A
H
nl
ow
Index
zones
power 7
speed 5
time 13
registering the device 14
replacing battery 13
resetting the device 14
restoring, settings 14
routes, settings 10
satellite page 12
satellite signals 2
saving activities 3
Index
D
oa
nl
ow
d
de
m
fro
e
.b
re
or
nb
de
an
.v
w
w
w
D
ow
oa
nl
www.garmin.com/support
d
de
m
fro
an
.v
w
w
w
0808 238 0000
+44 870 850 1242
1-866-429-9296
+43 (0) 820 220 230
+32 2 672 52 54
+45 4810 5050
+358 9 6937 9758
+ 331 55 69 33 99
+49 (0)180 6 427646
+ 39 02 36 699699
0800 - 023 3937
035 - 539 3727
+ 47 815 69 555
00800 4412 454
+44 2380 662 915
+ 35 1214 447 460
+ 34 93 275 44 97
+ 46 7744 52020
© 2012–2013 Garmin Ltd. or its subsidiaries
e
Garmin Corporation
No. 68, Zhangshu 2nd Road, Xizhi Dist.
New Taipei City, 221, Taiwan (R.O.C.)
.b
re
Garmin (Europe) Ltd.
Liberty House, Hounsdown Business Park
Southampton, Hampshire, SO40 9LR UK
or
Garmin International, Inc.
1200 East 151st Street
Olathe, Kansas 66062, USA
nb
de
913-397-8200
1-800-800-1020
Download PDF