Gas hob
[en] Instruction manual
! Pan supports
" Control knobs
# Auxiliary burner (up to 1 kW)
$ Semi-rapid burner (up to 1.75 kW)
% Rapid burner (up to 3 kW)
Table of contents
Safety precautions .....................................................................3
Causes of damage......................................................................5
Your new appliance ....................................................................6
Rotary knob for the gas burner........................................................6
Pan rest for the economy burner (option):.....................................6
Before first use ...........................................................................6
Cleaning the accessories..................................................................6
Advance cleaning of burner cup and cap .....................................6
Making settings on the hob .......................................................7
Igniting the gas burners.....................................................................7
Cookware and cooking recommendations ..............................7
Suitable pans .......................................................................................7
Precautions for use ............................................................................7
Table - Cooking...................................................................................8
Cleaning and maintenance ........................................................8
Maintenance ........................................................................................9
Trouble shooting ...................................................................... 10
After-sales service ................................................................... 10
E number and FD number ............................................................. 10
Packaging and equipment used .............................................11
Environmentally-friendly disposal.................................................. 11
Energy-saving tips............................................................................ 11
Measures to be noted during transport....................................... 11
Additional information on products, accessories, replacement
parts and services can be found at and
in the online shop
: Safety precautions
Please read this manual carefully. Please
keep the instruction and installation manual
as well as the appliance certificate in a safe
place for later use or for subsequent
The manufacturer is exempt from all
responsibility if the requirements of this
manual are not complied with.
This appliance is class 3 type, according to
the EN 30-1-1 regulation for gas
appliances: built-in appliance.
Appliance's type of approval: HIGVS6RQ00
The graphics in this instruction manual are
given as a guide only.
Do not remove the appliance from its
protective packaging until it is installed in
the unit.
Check the appliance for damage after
unpacking it. Do not connect the appliance
if it has been damaged in transport.
Caution:The use of a gas cooking
appliance results in the production of heat,
moisture and products of combustion in the
room in which it is installed. Ensure that the
kitchen is well ventilated especially when
the appliance is in use: keep natural
ventilation holes open or install a
mechanical ventilation device (mechanical
extractor hood).
Prolonged intensive use of the appliance
may call for additional ventilation, for
example opening of a window, or more
effective ventilation, for example increasing
the level of mechanical ventilation where
This appliance can only be installed in a
well-ventilated place in accordance with
existing regulations and ventilation
specifications. The appliance must not be
connected to a combustion product
removal device.
The place in which the appliance is installed
must have fully-functioning ventilation, in
accordance with the regulations.
This appliance must be installed according
to the installation instructions included.
Only allow a licensed professional to
connect the appliance and to convert the
appliance to a different type of gas. The
appliance must be installed (electric and
gas connections) in accordance with the
instruction and installation manual. An
incorrect connection or incorrect settings
may lead to serious accidents and damage
to the appliance. The appliance
manufacturer accepts no liability for
damage of this kind. The appliance's
warranty becomes void.
This appliance has been designed for home
use only, not for commercial or professional
use. This appliance cannot be installed on
yachts or in caravans. The warranty will only
be valid if the appliance is used for the
purpose for which it was designed.
This appliance is intended for domestic use
and the household environment only. This
appliance must only be used to prepare
food and drinks and must never be used as
a heater. Do not leave the appliance
unattended during operation. Only use the
appliance indoors.
This appliance is intended for use up to a
maximum height of 2000 metres above sea
This appliance is not intended for operation
with an external clock timer or a remote
Never leave the appliance unattended
during operation.
This appliance may be used by children
8 years old and older and by persons with
reduced physical, sensory or mental
capacity or a lack of experience or
knowledge if they are supervised or they
have been instructed about the safe use of
the appliance and have understood the
associated dangers.
Never let children play with the appliance.
Cleaning and user maintenance must not
be carried out by unsupervised children.
Risk of poisoning!
The kitchen will become hot and humid and
combustion products produced when this
gas appliance is used. Make sure the
kitchen is well ventilated, particularly when
the hob is in operation: either keep the
natural ventilation apertures open, or install
a ventilation system (extractor hood).
Intense prolonged use of the appliance may
require additional or more effective
ventilation: open a window or increase the
power of the ventilation system.
Risk of deflagration!
■ Accumulation of unburned gas in an
enclosed area carries a risk of
deflagration. Do not subject the appliance
to draughts. These might blow out the
burners. Carefully read the instructions
and warnings on the operation of gas
■ Hot oil and fat can ignite very quickly.
Never leave hot fat or oil unattended.
Never use water to put out burning oil or
fat. Switch off the hotplate. Extinguish
flames carefully using a lid, fire blanket or
something similar.
■ When gas hotplates are in operation
without any cookware placed on them,
they can build up a lot of heat. The
Risk of fire!
Risk of fire!
appliance and the extractor hood above it
may become damaged or be set on fire.
Grease residue in the filter of the extractor
hood may ignite. Only operate the gas
burners with cookware on them.
■ The hotplates become very hot. Never
place combustible items on the hob.
Never place objects on the hob.
■ The appliance becomes very hot, and
flammable materials can easily catch fire.
Do not store or use any flammable
objects (e.g. aerosol cans, cleaning
agents) under or in the vicinity of the oven.
Do not store any flammable objects inside
or on top of the oven.
■ The rear of the appliance becomes very
hot. This may cause damage to the power
cables. Electricity and gas lines must not
come into contact with the rear of the
Risk of burns!
■ The hotplates and surrounding area
(particularly the hob surround, if fitted)
become very hot. Never touch the hot
surfaces. Keep children at a safe distance.
■ During operation, the surfaces of the
appliance become hot. Do not touch the
surfaces when they are hot. Keep children
away from the appliance.
■ The alcoholic vapours may catch fire on
the hot cooking surface. Never prepare
food containing large quantities of drinks
with a high alcohol content. Only use low
percentage alcohol.
■ Empty cookware becomes extremely hot
when set on a gas hotplate that is in
operation. Never heat up empty cookware.
■ Metal objects on the hob quickly become
very hot. Never place metal objects (such
as knives, forks, spoons and lids) on the
■ If the liquefied gas bottle is not upright,
liquefied propane/butane can enter the
appliance. Intense darting flames may
therefore escape from the burners.
Components may become damaged and
start to leak over time so that gas escapes
uncontrollably. Both can cause burns.
Always use liquefied gas bottles in an
upright position.
■ The appliance becomes hot during
operation. Allow the appliance to cool
down before cleaning.
Risk of fire!
Risk of fire!
Risk of fire!
Risk of burns!
Risk of burns!
Risk of burns!
Risk of burns!
Risk of burns!
Risk of burns!
Risk of injury!
■ Incorrect repairs are dangerous. Repairs
may only be carried out, and damaged
power and gas lines replaced, by an aftersales engineer trained by us. If the
appliance is faulty, unplug the mains plug
or switch off the fuse in the fuse box. Shut
off the gas supply. Contact the after-sales
■ Faults or damage to the appliance are
dangerous. Never switch on a faulty
appliance. Unplug the appliance from the
mains or switch off the circuit breaker in
the fuse box. Shut off the gas supply.
Contact the after-sales service.
■ Unsuitable pan sizes, damaged or
incorrectly positioned pans can cause
serious injury. Observe the instructions
which accompany the cookware.
Risk of injury!
Risk of injury!
Risk of electric shock!
■ Incorrect repairs are dangerous. Repairs
may only be carried out by one of our
trained after-sales engineers. If the
appliance is faulty, unplug the mains plug
or switch off the fuse in the fuse box.
Contact the after-sales service.
■ The cable insulation on electrical
appliances may melt when touching hot
parts of the appliance. Never bring
electrical appliance cables into contact
with hot parts of the appliance.
■ Do not use any high-pressure cleaners or
steam cleaners, which can result in an
electric shock.
■ A defective appliance may cause electric
shock. Never switch on a defective
appliance. Unplug the appliance from the
mains or switch off the circuit breaker in
the fuse box. Contact the after-sales
Do not subject the appliance to draughts.
These might blow out the burners.
Do not tamper with the appliance's interior.
If necessary, call our Technical Assistance
If one of the control knobs will not turn, do
not force it. Call the Technical Assistance
Service immediately, so that they can repair
or replace it.
Do not use inappropriate child safety
shields or hob guards. These can cause
Risk of electric shock and serious injury!
Risk of electric shock!
Risk of electric shock!
Causes of damage
Ensure that the hob gas burners are clean and dry at all times.
The burner cup and burner cap must be positioned exactly.
Only use the burners when cookware has been placed on top.
Do not heat up empty pots or pans. The saucepan base will be
* Option: Only valid for some models.
Only use pots and pans with an even base.
Ensure that the top cover is not closed when the oven is started
Place the pot or pan centrally over the burner. This will optimise
transfer of the heat from the burner flame to the pot or ban
base. The handle does not become damaged, and greater
energy savings are guaranteed.
If you are using the appliance with a gas cylinder, the cylinder
must be stood upright. Using the gas cylinder horizontally can
damage your appliance's interior components and cause a gas
Your new appliance
Page 2 shows an overall view of your new appliance as well as
the burner power.
Rotary knob for the gas burner
There are indications to show which burner each control knob
Power levels
The progressive control knobs can be used to control the
power needed, from minimum to maximum power.
High flame
Low flame
Control knob off
Minimum capacity or aperture
Maximum capacity or aperture and electricity on
Pan rest for the economy burner (option):
Use the pan rest supplied with the appliance when you use the
economy burner to prepare dishes using small saucepans with
a diameter of less than 12 cm or Turkish coffee using a small
espresso jug.
It is essential to ensure that all the burner parts and pan
supports are correctly installed for the appliance to work
correctly. Do not swap the burner caps around.
Place the pan rest on the economy burner's steel grid.
Do not use the pan rest for saucepans with a diameter of more
than 12 cm.
The pan rest must only be used on the economy burner.
Before first use
The things you should note before first use are detailed below.
First read the Safety Precautions section .
Cleaning the accessories
Before you use the accessories for the first time, clean them
thoroughly with hot soapy water and a soft dish cloth.
Advance cleaning of burner cup and cap
Clean the burner cap (1) and burner cup (2) with water and
washing-up liquid. Dry the individual parts carefully.
Place the burner cup and cap back on the burner shell (5).
Ensure that the igniter (3) and flame safety pin (4) are not
The nozzle (6) must be dry and clean. Always position the
burner cap exactly over the burner cup.
Making settings on the hob
Your hob is equipped with four gas burners. The following
information explains how to light the gas burners and set the
size of flame.
Igniting the gas burners
Ensure that the burner lid always sits on the burner cup
correctly. The slots on the burner cup must not be blocked. All
parts must be dry.
The burner knob should not be pressed in the ignition position
for longer than 15 seconds. If the burner does not ignite within
15 seconds, wait at least one minute. Then repeat the ignition
: Caution!
If, after switching the gas hob off, you turn the burner knob
while the gas hob is still hot, gas will escape. If you do not
press the burner knob, the gas is not ignited and the gas
supply is interrupted within 90 seconds.
No ignition occurs
If there is a power cut or if the ignition plugs are damp, you can
light the gas burners with a gas lighter or a match.
It is normal to hear a soft whistling noise while the burner is
1. Press the burner knob of the selected burner in and turn it
anti-clockwise to the highest power level. When the burner
knob is pressed, the ignition process starts.
2. Press and hold the burner knob for 3-5 seconds. Gas begins
to flow out and the gas burner ignites.
The safety pilot is activated. If the gas flame goes out, the gas
supply is automatically cut off by the safety pilot.
When first used, it is normal for the burner to give off odours.
This does not pose any risk and does not indicate a
malfunction. They will disappear in time.
An orange-coloured flame is normal. This is caused by the
presence of dust in the atmosphere, spilt liquids, etc.
If the burner flames are accidentally blown out, switch off the
burner operating control knob and do not try to relight it for at
least 1 minute.
3. Set the required flame height. The flame is not stable
A few seconds after the burner is switched off, a sound (thud)
will be produced. This is not a fault - this means that the safety
device is no longer operating.
4. If the flame goes out again, repeat the process from step 1.
Keep the burner as clean as possible. If the ignition sparkers
are dirty they will not light properly. Clean them periodically
using a small non-wire brush. Bear in mind that the ignition
sparkers must not suffer any serious impacts.
between the Off position and the highest power level. For this
reason, you should always select a setting between the
highest and lowest power level.
5. To finish cooking, turn the burner knob clockwise to the Off
Cookware and cooking recommendations
Suitable pans
Minimum pan
Maximum pan
Wok burner
22 cm
- cm
Rapid burner
22 cm
26 cm
Semi-rapid burner
14 cm
20 cm
Auxiliary burner
12 cm
16 cm
Precautions for use
The following advice is intended to help you save energy and
prevent pan damage:
Use pans which are the right
size for each burner.
Do not use small pans on
large burners. The flame must
not touch the sides of the pan.
Do not use damaged pans,
which do not sit evenly on the
hob. Pans may tip over.
Do not cook without using a lid
and make sure the lid is
properly fitted. This wastes
Always centre the pan over the
burner, not to one side.
Otherwise it could tip over.
Do not place large pans on the
burners near the control
knobs. These may be
damaged by the very high
Place the pans on the pan
supports, never directly on the
Make sure that the pan
supports and burner caps are
correctly positioned before
using the appliance.
Only use pans with a thick, flat
Pans should be placed on the
hob carefully.
Do not strike the hob and do
not place excessive weight on
Table - Cooking
Select the right saucepan size for each burner. The diameter of
the saucepan or pan base should be the same as that of the
Cooking times may vary depending on the type of food, its
weight and quality. You yourself can best judge the optimal
cooking time.
Use as little water as possible when cooking, so that the food
retains its vitamins and minerals. Select short cooking times so
that the vegetables remain firm and full of nutrients.
Chocolate, butter, margarine
Cooking position
Heat setting
Economy burner
small flame
Electric hotplate**
Standard burner
small flame
Stock, tinned vegetables
Electric hotplate**
Heating and keeping
Economy burner
small flame
Electric hotplate**
Standard burner
between large and small flame
Electric hotplate**
Potatoes and miscellaneous
vegetables, meat
Standard burner
between large and small flame
Electric hotplate**
Rice, vegetables, meat dishes Standard burner
(with sauces)
Electric hotplate**
large flame
Pancakes, potatoes, schnitzel, Large burner
fish fingers
Wok burner
between large and small flame
Electric hotplate**
between large and small flame
* If you are using a saucepan with a lid, turn the flame down as soon as it reaches boiling point.
** Optional. Available for some appliances, depending on the appliance model (for frying on the wok burner, we recommend that
you use a wok).
Cleaning and maintenance
For the cooking area to have optimum power and a long
service life, thorough cleaning and maintenance are essential.
As a safety precaution, turn the gas off at the gas cylinder
controller. (If the cooker is set up to use natural gas, close the
natural gas tap).
Unplug the appliance from the mains.
If the burner is still hot, let it cool down first.
Do not use any high-pressure cleaners or steam jets.
When cleaning the cooker, do not use any flammable
substances such as acids, diluting agents, petrol or benzene.
Under no circumstance should abrasive cleaning products or
materials be used, which may cause scratches.
Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
When cleaning the hob do not use
undiluted washing-up liquid or dishwasher detergent,
cleaning agent with a high alcohol content,
scouring pads,
abrasive cleaning agents such as oven cleaner or stain
Do not use caustic or abrasive cleaning agents.
Do not clean individual parts in the dishwasher.
Wash new sponges thoroughly before first use.
Stainless steel surfaces* (depending
on the appliance
Clean it with stainless-steel cleaning agent and a soft cloth. Always wipe stainless steel surfaces parallel to
the natural grain. Otherwise, you may scratch the surface. Dry with a soft cloth. Always remove any flecks of
limescale, grease, starch and egg white immediately. Harsh cleaning products, scratchy sponges and
rough cleaning cloths are not suitable. You can use special care products to polish the stainless steel
fronts. Follow the manufacturer's instructions. Special stainless-steel cleaning agents are available from the
after-sales service or from specialist retailers.
Enamelled, painted
and silkscreen surfaces* (depending
on the appliance
Wipe with warm soapy water and a cloth. Dry with a soft cloth.
* Optional (available for some appliances, depending on the appliance model)
Gas burner and steel Do not clean in the dishwasher. Remove the steel grid and clean this using a sponge, some hot water and
washing-up liquid. Remove the burner casing and burner cap. Use a sponge with some hot water and
washing-up liquid to clean these. Ensure that the gas openings on the burner casing are clean and free
from dirt particles. Clean the igniter with a small, soft brush. The gas burners only work properly when the
igniters are clean. Use a cloth and some hot soapy water to remove the food remains from the burner casing. Only use a little water for this. Water must not get into the interior of the appliance. Ensure that the jet
opening is not blocked or damaged during the cleaning process. Dry all of the parts after they are cleaned,
and place the burner caps exactly onto the burner casings. Individual parts that are not correctly positioned
make it difficult for the burner to ignite. Place the steel grid back into its position. The cleaning agent that we
recommend for cleaning the steel grid is available from our after-sales service or specialist retailers.
Glass hob* (depend- Care: Protective/care products for glass
ing on the appliance Cleaning: Cleaning agents for glass.
Follow the cleaning instructions on the packaging.
:Glass scraper for heavy soiling:
Remove the protective cover and clean using the blade only. Caution, the blade is very sharp. Risk of injury.
Cover the blade again after cleaning. Replace damaged blades immediately.
Electric hotplate*
(depending on the
appliance model)
Clean with the hard side of a scouring sponge and some liquid scouring agent. After cleaning, switch the
hob on briefly to dry it. Wet hobs rust over time. Then apply a care product. Always remove spilt liquids and
food residue immediately.
Metal hotplate ring*
(depending on the
appliance model)
The metal ring may discolour with time. However, the original colour can be restored. Clean the ring with the
hard side of a scouring sponge and some liquid scouring agent. Do not touch the adjacent surfaces. These
may become damaged. The recommended cleaning agent for the metal ring on the electric hotplate is
available from our after-sales service or specialist retailers
Rotary knobs
Wipe with warm soapy water and a cloth. Dry with a soft cloth.
Soak in warm soapy water. Use a non-metal brush or a sponge to clean it.
Upper glass cover*
(depending on the
appliance model)
Glass cleaner:
Clean with a soft cloth.
You can remove the upper glass cover for cleaning. To find out how to do this, please refer to the section
Upper glass cover.
* Optional (available for some appliances, depending on the appliance model)
If the pan supports are fitted with rubber rests, ensure that
these are also cleaned. The rests may come loose and the pan
support may scratch the hob.
After cleaning and drying the steel grids, ensure that they are
correctly fitted.
Always clean off any liquid as soon as it is spilt. This will
prevent food remains from sticking to the hob surface and you
will save yourself any unnecessary effort.
After each use, clean the surface of the respective burner parts
once they have cooled down. If any residue is left (baked-on
food, drops of grease etc.), however little, it will become stuck
to the surface and more difficult to remove later. The holes and
grooves must be clean for the flame to ignite properly.
The movement of some pans may leave metal residue on the
pan supports.
Clean the burners and pan supports using soapy water and
scrub with a non-wire brush.
Thoroughly remove spilt cooking oil and acidic foodstuffs such
as lemon immediately.
Under no circumstance should abrasive cleaning powder be
used to clean the control panel. The inscriptions can be
scratched off as a result.
The burner caps are coated with black enamel. Due to the high
temperatures, discolouration may occur. Their burner function
is not adversely affected by this.
Never slide pans across the glass surface, as you may scratch
it. In addition, try not to drop heavy or sharp objects on the
glass. Never strike any part of the hob.
Grains of sand that may come from cleaning fruits and
vegetables will scratch the glass surface.
Melted sugar, or foods which contain a lot of sugar which may
have spilt, should be cleaned off the hotplate immediately,
using the glass scraper.
Avoid spilling salt on the surface of the electric hob.
Do not clean individual parts of the appliance in the
Always dry the burners and pan supports completely. Water
droplets or damp patches on the hob at the start of cooking
may damage the enamel.
The stainless steel cleaner must not be used in the area around
the controls. The (printed) symbols may be wiped off.
Trouble shooting
Sometimes certain faults detected can be easily resolved.
Before calling the Technical Assistance Service, bear in mind
the following advice:
Possible cause
The general electrical sys- Defective fuse.
tem is malfunctioning.
Check the fuse in the main fuse box and change it
if it is damaged.
The automatic safety switch or circuit breaker has Check the main control panel to see if the autotripped.
matic safety switch or circuit breaker has tripped.
The automatic switching
There may be food or cleaning products stuck
on function does not work. between the ignition sparkers and the burners.
The space between the ignition sparker and the
burner must be clean.
The burners are wet.
Dry the burner caps carefully.
The burner caps are not correctly positioned.
Check that the burner caps are correctly positioned.
The appliance is not earthed, is poorly connected Contact the installation technician.
or the earthing is faulty.
The burner flame is not uni- The burner components are not correctly posiform.
The grooves on the burner are dirty.
Correctly place the parts on the appropriate
Clean the grooves on the burner.
The gas flow is not normal The gas supply is blocked by gas taps.
or there is no gas.
If the gas is supplied from a gas cylinder, check
that it is not empty.
Open all gas taps.
Change the gas cylinder.
The kitchen smells of gas. A gas tap has been left on.
Turn off the taps.
Incorrect coupling of gas cylinder.
Check that the coupling is sound.
Possible gas leak.
Shut off the gas supply, ventilate the premises and
immediately notify an authorised installation technician to check and certify the installation. Do not
use the appliance until ensuring that there is no
gas leak in the installation or appliance itself.
The burner immediately
The control knob was not held down for long
switches off after releasing enough.
the control knob.
The grooves on the burner are dirty.
Once the burner is on, hold the control knob down
a few seconds longer.
Clean the grooves on the burner.
After-sales service
Our after-sales service is there for you if your appliance needs
to be repaired. We will always find the right solution in order to
avoid unnecessary visits from a service technician.
E number and FD number
To help speed up the process, please have your product
number (E no.) and production number (FD no.) ready when
you contact after-sales service. The nameplate containing these
numbers is found on the underside of your cooker. To save
time in the event of a fault, you can make a note of the numbers
for your appliance and the after-sales service telephone
number in the space below.
E no.
FD no.
After­sales service O
Note that, even within the guarantee period, you are
responsible for service and repair costs in the case of improper
use or misuse.
Please find the contact data of all countries in the enclosed
customer service list.
To book an engineer visit and product advice
0344 892 8979
Calls charged at local or mobile rate.
01450 2655
0.03 € per minute at peak. Off peak 0.0088 € per
Rely on the professionalism of the manufacturer. You can
therefore be sure that the repair is carried out by trained service
technicians who carry original spare parts for your appliances.
Warranty conditions
In the unlikely event that the appliance is damaged or does not
meet your expectations in terms of quality, please inform us as
soon as possible. For the warranty to be valid, the appliance
must not have been tampered with, or used inappropriately.
The applicable warranty conditions are those set out by the
company's representative office in the country of purchase.
Detailed information is available from retail outlets. Proof of
purchase must be presented to obtain the benefits of the
We reserve the right to introduce changes.
Packaging and equipment used
If your appliance has a crossed-out dustbin symbol ) , please
note the following.
Energy-saving tips
Environmentally-friendly disposal
Dispose of packaging in an environmentally-friendly manner.
This appliance is labelled in accordance with
European Directive 2012/19/EU concerning used
electrical and electronic appliances (waste electrical
and electronic equipment - WEEE). The guideline
determines the framework for the return and recycling
of used appliances as applicable throughout the EU.
The packaging of your appliance has been manufactured using
only the materials which are strictly necessary to guarantee
efficient protection during transport. These materials are 100%
recyclable, thus reducing the environmental impact. You can
also contribute to caring for the environment by following the
advice below:
Dispose of the packaging in the appropriate recycling bin.
Before you get rid of an old appliance, make sure you disable
it. Contact your local authority to find out the address of your
nearest recycling centre to dispose of your appliance.
Do not pour used oil down the sink. Collect it in a sealed
container and take it to an appropriate collection point or,
failing that, place it in the rubbish bin (it will end up in a
controlled dump; this is probably not the best option, but it
will avoid contaminating ground water)
Always place suitable lids on saucepans. When cooking
without a lid, considerably more energy is required. A glass
lid means that you can see inside without having to lift the lid.
Use pots and pans with even bases. Uneven bases increase
energy consumption.
The diameter of pot and pan bases should be the same size
as the hotplate. In particular, small saucepans on the hotplate
cause energy losses. Please note: cookware manufacturers
often indicate the upper diameter of the saucepan. This is
usually bigger than the diameter of the base of the pan.
Use a small saucepan for small quantities. A larger, less full
saucepan requires a lot of energy.
Cook with only a little water. This will save energy. Vitamins
and minerals in vegetables are preserved.
Always cover as large an area of the hotplate as possible
with your saucepan.
Switch to a lower heat setting in good time.
Select a suitable ongoing cooking setting. You will waste
energy by using an ongoing cooking setting which is too
Use the residual heat of the hob. For longer cooking times,
you can switch the hotplate off 5-10 minutes before the end
of the cooking time.
Measures to be noted during transport
Secure all mobile parts on the appliance using an adhesive
tape that can be removed without leaving any traces. Secure
the top cover, if available, to the appliance sides using
adhesive tape.
Keep the original appliance packaging. Only transport the
appliance in the original packaging. Observe the transport
arrows on the packaging.
If the original packaging is no longer available
pack the appliance in protective packaging to guarantee
sufficient protection against any transport damage.
The appliance must be transported upright, with the hotplate
and the burners facing upwards. Do not place any heavy
objects on the appliance.
Robert Bosch Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München
Download PDF