Operating Instructions Blu-ray Disc™ Recorder Model No. DMR

DMR-BST&BCT765&760EG_eng.book 1 ページ
2017年3月2日 木曜日 午後6時35分
Operating Instructions
Blu-ray Disc™ Recorder
Model No. DMR-BCT765 DMR-BST765
DMR-BCT760 DMR-BST760
Getting started
Watching broadcasts
Recording
Playing back video
Editing video
Copying video
Thank you for purchasing this product.
Please read these instructions carefully before using this
product, and save this manual for future use.
Software (Firmware) Update
To support the latest features, it’s very
important you install the latest updates
to maintain proper operation of your unit.
For details, refer to “Software
(Firmware) Update” (> 80) or
http://panasonic.jp/support/global/cs/
(This site is in English only.)
Photo and Music
Network
With Other Equipment
Other functions
Setup
Reference
EG
TQBS0024
until
2017/03/20
DMR-BST&BCT765&760EG_eng.book 2 ページ
2017年3月2日 木曜日 午後6時35分
Safety precautions
WARNING
CAUTION
Unit
• To reduce the risk of fire, electric shock or
product damage,
- Do not expose this unit to rain, moisture,
dripping or splashing.
- Do not place objects filled with liquids, such as
vases, on this unit.
- Use only the recommended accessories.
- Do not remove covers.
- Do not repair this unit by yourself. Refer
servicing to qualified service personnel.
- Do not let metal objects fall inside this unit.
- Do not place heavy items on this unit.
Unit
AC mains lead
• To reduce the risk of fire, electric shock or
product damage,
- Ensure that the power supply voltage
corresponds to the voltage printed on this unit.
- Insert the mains plug fully into the socket
outlet.
- Do not pull, bend, or place heavy items on the
lead.
- Do not handle the plug with wet hands.
- Hold onto the mains plug body when
disconnecting the plug.
- Do not use a damaged mains plug or socket
outlet.
• The mains plug is the disconnecting device.
Install this unit so that the mains plug can be
unplugged from the socket outlet immediately.
Placement
• Place this unit on an even surface.
• To reduce the risk of fire, electric shock or
product damage,
- Do not install or place this unit in a bookcase,
built-in cabinet or in another confined space.
Ensure this unit is well ventilated.
- Do not obstruct this unit’s ventilation openings
with newspapers, tablecloths, curtains, and
similar items.
- Do not expose this unit to direct sunlight, high
temperatures, high humidity, and excessive
vibration.
• This unit utilizes a laser. Use of controls or
adjustments or performance of procedures other
than those specified herein may result in
hazardous radiation exposure.
• Do not place sources of naked flames, such as
lighted candles, on this unit.
• This unit may receive radio interference caused
by mobile telephones during use. If such
interference occurs, please increase separation
between this unit and the mobile telephone.
• This unit is intended for use in moderate
climates.
(Inside of product)
2
TQBS0024
DMR-BST&BCT765&760EG_eng.book 3 ページ
2017年3月2日 木曜日 午後6時35分
Batteries
• Danger of explosion if battery is incorrectly
replaced. Replace only with the type
recommended by the manufacturer.
• Mishandling of batteries can cause electrolyte
leakage and may cause a fire.
- Do not mix old and new batteries or different
types at the same time.
- Do not heat or expose to flame.
- Do not leave the battery(ies) in a car exposed
to direct sunlight for a long period of time with
doors and windows closed.
- Do not take apart or short circuit.
- Do not recharge alkaline or manganese
batteries.
- Do not use batteries if the covering has been
peeled off.
- Remove batteries if you do not intend to use
the remote control for a long period of time.
Store in a cool, dark place.
• When disposing of the batteries, please contact
your local authorities or dealer and ask for the
correct method of disposal.
Supplied accessories
Please check and identify the supplied
accessories.
(Product numbers are correct as of March 2017.
These may be subject to change.)
Remote control (N2QAYB001113):
Batteries for remote control:
AC mains lead:
1 pc.
2 pcs.
1 pc.
[BCT765] [BCT760]
RF coaxial cable:
1 pc.
• Do not use AC mains lead with other equipment.
Insert batteries
Insert so the poles (i and j) match those in the
remote control.


R6/LR6, AA
(Alkaline or manganese batteries)
[BCT765] [BCT760]
About descriptions in these operating
instructions
[BST765] [BST760]
• These operating instructions are applicable to models
DMR-BCT765, DMR-BCT760, DMR-BST765 and
DMR-BST760. The illustrations in these Operating
Instructions show images of DMR-BCT765 unless
otherwise indicated.
• [BCT765] [BCT760] :
indicates features applicable to DMR-BCT765 and
DMR-BCT760 only.
• [BST765] [BST760] :
indicates features applicable to DMR-BST765 and
DMR-BST760 only.
• Pages to be referred to are indicated as “> ±±”.
• Images are for illustration purpose, contents may change
without notice.
TQBS0024
3
DMR-BST&BCT765&760EG_eng.book 4 ページ
2017年3月2日 木曜日 午後6時35分
Table of contents
Safety precautions . . . . . . . . . . . . . . . . . . . . 2
Supplied accessories . . . . . . . . . . . . . . . . . . 3
Getting started
Unit care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Remote Control . . . . . . . . . . . . . . . . . . . . . . . 8
CI (Common Interface) module . . . . . . . . . 9
Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
HDD and media information . . . . . . . . . . . 20
FUNCTION MENU screen . . . . . . . . . . . . 25
Watching broadcasts
Watching broadcasts . . . . . . . . . . . . . . . . . 26
Recording
Recording TV programmes . . . . . . . . . . . . 30
Timer recording . . . . . . . . . . . . . . . . . . . . . . 34
Keyword Recording . . . . . . . . . . . . . . . . . . 38
Using the external HDD (USB HDD) . . . . 41
Playing back video
Playing programmes on the HDD . . . . . . 42
Playing contents on the media . . . . . . . . . 46
Operation during play. . . . . . . . . . . . . . . . . 48
4K Networking . . . . . . . . . . . . . . . . . . . . . . . 51
Playback menu . . . . . . . . . . . . . . . . . . . . . . 52
Editing video
Deleting/Editing programmes . . . . . . . . . . 54
Copying video
Copying programmes. . . . . . . . . . . . . . . . . 59
4
TQBS0024
Photo and Music
Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Network
Network Service . . . . . . . . . . . . . . . . . . . . . 72
TV Anywhere . . . . . . . . . . . . . . . . . . . . . . . . 72
DVB-via-IP Server Function (TV>IP) . . . 73
Home Networking (DLNA) . . . . . . . . . . . . 74
With Other Equipment
Recording from external equipment . . . . 78
Copying the HD Video (AVCHD) . . . . . . . 78
Other functions
VIERA Link . . . . . . . . . . . . . . . . . . . . . . . . . 79
Software (Firmware) Update . . . . . . . . . . 80
Other operations . . . . . . . . . . . . . . . . . . . . . 81
Setup
Basic Settings . . . . . . . . . . . . . . . . . . . . . . . 84
Reference
Troubleshooting guide . . . . . . . . . . . . . . . . 97
Specifications . . . . . . . . . . . . . . . . . . . . . . 104
Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Getting started
2017年3月2日 木曜日 午後6時35分
Unit care
HDD/USB HDD handling care
• The HDD is a high precision recording
instrument and is easily susceptible to damage.
Therefore, be careful of the following points
while the unit is turned on, especially during
operation, otherwise the HDD and the recorded
content may be damaged:
- Do not subject the unit to any vibration and
shock.
- Do not remove the AC mains lead from the
household mains socket.
• The HDD is a temporary storage device
- It is recommended to save the recorded
content on a disc or to keep the original data or
CDs that they were copied from.
- If you notice a problem with the HDD such as
repetitive strange sounds, immediately save
(backup) all content and request service. If you
continue using the HDD with a problem, the
unit or the recorded content will be damaged.
• If the HDD or USB HDD is damaged, the
recorded content cannot be recovered.
Setup precautions
• Do not place on anything that generates heat
like a Set Top Box, etc.
• Place in an area where condensation does
not occur. Conditions where condensation
may occur
- When there is an extreme change in
temperature.
- When there is high humidity or a lot of steam
in the room.
In the above situation, without turning the unit
on, let the unit adjust to the room temperature
and wait 2–3 hours until condensation is gone.
When moving the unit
Before moving the unit, ensure the disc tray is
empty.
1 Switch the unit to standby mode. (Wait until
“BYE” disappears from the display.)
2 Remove the AC mains lead from the
household mains socket.
3 Move only after the unit has come to a
complete stop (approx. 3 minutes) in order to
avoid subjecting to vibration and shock. (Even
after the unit is switched to standby mode, the
HDD continues operating for a short time.)
Cleaning
• Wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to
clean this unit.
• Before using chemically treated cloth, carefully
read the instructions that came with the cloth.
• Use the lens cleaner (not supplied) to clean the
unit’s lens.
When requesting this unit for repair
The registration of the USB HDD may be
cancelled in the process of repairing this unit.
You can use the USB HDD again by
re-registering, but all recorded content already on
the USB HDD will be lost. In such cases, the
recorded content (data) cannot be recovered.
To dispose or transfer this unit
This unit may contain private information. Before
disposing of or transferring this unit, perform the
following to delete the data, including personal or
secret information:
- Format HDD (> 89)
- Perform “Shipping Condition” (> 96)
• The unit may breakdown if cigarette smoke
or bug spray/vapour, etc. gets inside the
unit.
TQBS0024
5
Getting started
DMR-BST&BCT765&760EG_eng.book 5 ページ
DMR-BST&BCT765&760EG_eng.book 6 ページ
2017年3月2日 木曜日 午後6時35分
Main unit
Front
Getting started







Pull to flip down
the front panel.
Disc tray
Display (> 7)
USB port (
DC 5 V 500 mA)
Remote control signal sensor
• Angle: Approx. 20° up and down, 30° left and
right
• Distance: Within approx. 7 m in front of the
unit
5 CI slot (> 9)
6 Open/close disc tray
7 Standby/on switch (Í/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
1
2
3
4
Inserting or removing media
∫ Disc
Disc
∫ USB device
• While writing to/reading from the media, do not switch the
unit to standby mode or remove the media. Such action
may result in loss of the media contents.
• When inserting the media, ensure that it is facing the right
way up.
• The USB port on the front side does not support
USB HDDs. Connect a USB HDD to the USB port on the
rear side. (> 41, Connecting the USB HDD)
6
TQBS0024
DMR-BST&BCT765&760EG_eng.book 7 ページ
2017年3月2日 木曜日 午後6時35分
Display



  

1
2
3
4
5
6
7
Drive (HDD or BD) indicator
Disc indicator
Digital broadcast indicator
Copying indicator
USB port indicator
Remote control signal indicator
Timer recording indicator
This indicator lights up when the timer
recording standby or Keyword Recording
standby is activated.

8 Recording indicator
• The indicator will light up while recording.
• The indicator will blink while recording is
paused and before recording starts.
9 Main display section indicator
• Messages and other information are
displayed. (> 102)
: Playback indicator
Getting started

Rear


1
2
3
4
5
6
7


AC IN terminal (
)
Cooling fan
LNB IN 1/2 terminal ([BST765] [BST760])
RF IN/OUT terminal ([BCT765] [BCT760])
HDMI terminal
LAN port
USB port (
DC 5 V 500 mA)
• Connect a USB HDD to this USB port.





8 COAXIAL terminal
9 AV IN (EXT) 21-pin Scart terminal
Class II equipment (The construction of the
product is double-insulated.)
TQBS0024
7
DMR-BST&BCT765&760EG_eng.book 8 ページ
2017年3月2日 木曜日 午後6時35分
Remote Control
Instructions for operations are generally described using the remote control.

TV

1
Getting started

CH
2abc 3def
REC
4ghi 5jkl
7
p
qrs


VOL
INPUT
AV
10s
CH
w
8tuv 9xyz
RADIO/ INPUTSELECT
TV
LAST VIEW
INTERNET





+60s
REWIND LIVE T V


PAGE
6mno
0

x1.3
SLOW
PAUSE LIVE TV


STATUS
EXIT
GUIDE

OK
OPTION
MENU
ION
CT
FUN



RETURN





8
AUDIO DRIVE SELECT TEXT
TQBS0024
ST TL


1 Transmit the remote control signal
• Point it at remote control signal sensor on
this unit. (> 6)
2 Switch the unit from on to standby mode or
vice versa
3 Select channels and programme numbers,
etc./Enter numbers or characters
4 Switch to the previously watched channel
(> 26)
5 Manual skip (> 49)
-10s: Skip approx. 10 seconds backward
+60s: Skip approx. 1 minute forward
6 Basic operations for recording and play,
REWIND LIVE TV/PAUSE LIVE TV (> 29)
7 Show Information (> 26, 44, 48)
8 Selection/OK, Frame-by-frame (> 48)
9 Show Video Menu, Top Menu, Pop-up Menu
(> 42)
: Show OPTION menu (> 52, 54, 69)
; Colour buttons (red, green, yellow, blue)
(Use in accordance with instruction on the
screen.)
< Select audio (> 27, 49)
= Select drive (HDD, Disc or USB)
> TV operation buttons (> 15)
? Start recording (> 30, 78)
@ Channel select (> 26)/Change pages in the
Video Menu screen etc.
A Switching to the radio channel list (> 26)
B Input select (> 26, 78)
C Show NETFLIX screen (> 72)
D Show the Network Service screen (> 72)
E Exit the menu screen
F Show the TV Guide screen (> 28)
G Show the FUNCTION MENU screen (> 25)
H Return to previous screen
I Show subtitles (> 27, 49)
J Show Teletext (> 27, 49)
DMR-BST&BCT765&760EG_eng.book 9 ページ
2017年3月2日 木曜日 午後6時35分
CI (Common Interface) module
Encrypted programmes and broadcasts cannot be viewed with the unit by using standard
connections and settings. An appropriate CI module is required to view or record them.
You need a CI module, CAM (Conditional Access Module) together with a certified Smart Card, and a
subscription with the corresponding broadcaster.
• If not viewing/recording an encrypted broadcast, you do not need to insert the CI module.
CI module
Insert the CI module into the CI slot of this unit.
CAM (CI module)
Getting started
Smart Card
CI slot
This unit
This unit allows you to record/view/play an encrypted programme when automatic decryption is
enabled. (Recording may not be possible, depending on the broadcaster.)
See “Notes for recording of an encrypted broadcast” (> 32)
•
•
•
•
Turn off the unit before you insert or remove the CI module.
Insert the CAM and the Smart Card with the correct direction.
Point the CI module at the front side of this unit, and insert it carefully.
For more details, see the manual of the CAM and Smart Card, or consult the dealer.
TQBS0024
9
DMR-BST&BCT765&760EG_eng.book 10 ページ 2017年3月2日 木曜日 午後6時35分
About CI Plus compatible broadcast
“CI Plus” is a technical specification that imposes
contents protection, etc.
CI Plus contents protection
When the CI Plus compatible broadcast is
recorded, the programme may be contents
protected. There are following types of the
contents protection depending on the broadcast:
Getting started
• Copying not restricted
Depending on the programme, you can
copy/move only to USB HDD, BD-RE, BD-R, or
DVD-RAM (CPRM compatible discs only).
• One generation copy is permitted
You can copy to BD-RE, BD-R or DVD-RAM
(CPRM compatible discs only) only once.
• The original programme will be deleted.
• You cannot copy from the copied BD-RE,
BD-R or DVD-RAM (CPRM compatible discs)
to HDD or another disc.
When the picture quality is changed, the original
programme will be deleted.
•
icon will appear on the Video Menu
screen. (> 43)
• Copying is prohibited
You cannot copy/move to the USB HDD or disc.
The content of these media may also have the
following playback restrictions.
- Retention limit (> right)
- Content License (> right)
Retention limit
There are some programmes for which the
playback will be disabled after a predetermined
time.
(e.g., Permitted playback period is 90 minutes
after recording.)
• When the programme does not have playback
period,
screen after decrypting. (> 43)
• When the programme has playback period,
or
TQBS0024
icon will appear on the Video Menu
screen after decrypting. (> 43)
Content License
Playing back a programme with this restriction
requires a CAM with a playback licence for it.
• The number of times the programme can be
played back may also be limited.
• When the programme does not have playback
period,
icon will appear on the Video Menu
screen after decrypting. (> 43)
• When the programme has playback period,
icon will appear on the Video Menu screen
after decrypting. (> 43)
Parental Control
Playing back a programme with this restriction
requires a CAM and enter the PIN code.
•
10
icon will appear on the Video Menu
icon will appear on the Video Menu screen.
(> 43)
DMR-BST&BCT765&760EG_eng.book 11 ページ 2017年3月2日 木曜日 午後6時35分
Connection
3D programmes or 4K images can be played back when this unit is connected to 3D or 4K
compatible terminal of a 3D or 4K compatible TV.
• Before making any connections, please disconnect all the units from AC power.
(Connect the AC mains lead after making all connections.)
• Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable.
When outputting 1080p or 24p (4K) signal, please use HDMI cables 5.0 meters or less.
• When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of
power, even when the unit is in standby mode. (> 104)
Getting started
[BCT765] [BCT760] Basic connections
To the CATV terminal or the Aerial
CATV coaxial cable or Aerial cable
This unit’s rear panel
RF coaxial cable
(supplied)
AC mains lead
(supplied)
• Connect only after all other
connections are complete.
HDMI cable
VHF/UHF
RF IN
HDMI
Household mains socket
(AC 220 to 240 V, 50 Hz)
• Keep the RF coaxial cables as far away as possible from other cables.
• Switchover from DVB-T to DVB-T2 is scheduled. (DVB-T2 is not supported by this unit.)
For details, check the relevant announcements made by broadcast stations. (Germany only)
TQBS0024
11
DMR-BST&BCT765&760EG_eng.book 12 ページ 2017年3月2日 木曜日 午後6時35分
[BST765] [BST760] Basic connections
Getting started
The following three connection methods are available. Choose a method suited to your environment.
A Using a multi switcher:
You can record two programmes simultaneously.
• Connect both LNB IN 1 and LNB IN 2 to the satellite dish.
B Using a single cable router:
You can record two programmes simultaneously.
• Connect satellite cable to LNB IN 1 terminal.
C Connecting a satellite cable directly:
You can record only one programme at a time.
• Connect LNB IN 1 terminal to the satellite dish.
Satellite dish
Multi switcher
Satellite dish
Satellite dish
Single cable
router§
This unit’s rear panel
AC mains lead
(supplied)
• Connect only after all other
connections are complete.
HDMI cable
HDMI
Household mains socket
(AC 220 to 240 V, 50 Hz)
§ Check the version of the single cable router. (> 18)
12
TQBS0024
DMR-BST&BCT765&760EG_eng.book 13 ページ 2017年3月2日 木曜日 午後6時35分
The video equipment (VCR)
connections
Amplifier/receiver connections
HDMI terminal
HDMI cable
Amplifier/
receiver
Getting started
21-pin Scart cable
HDMI cable
AV §
Video equipment (VCR)
§
A 21-pin Adaptor is required for
AUDIO/VIDEO terminal.
• You will not be able to view 3D programmes or
4K images with this connection if your
amplifier/receiver is not 3D or 4K compatible.
TQBS0024
13
DMR-BST&BCT765&760EG_eng.book 14 ページ 2017年3月2日 木曜日 午後6時35分
∫ Amplifier/receiver not compatible with 3D
or 4K
3D programmes or 4K images can be played
back when this unit is connected to a 3D or 4K
compatible TV.
• This connection only supports up to 5.1ch.
DIGITAL AUDIO OUT terminal
Amplifier/receiver
Coaxial cable
Amplifier/
receiver
Getting started
HDMI cable
• When you do not want the audio to be output from the TV,
set “Audio Output” to “Off” (> 92).
HDMI cable
• When using a TV or an amplifier/receiver that does not
display “ARC” on the HDMI terminal, it is necessary to
connect the TV and the amplifier/receiver with a digital
audio cable to enjoy the TV audio on the
amplifier/receiver.
14
TQBS0024
DMR-BST&BCT765&760EG_eng.book 15 ページ 2017年3月2日 木曜日 午後6時35分
Settings
When this unit is connected to the network, you
can enjoy network functions (DLNA function,
Network Service, TV Anywhere, etc.).
For details about connection method, refer to the
instructions supplied with the connected
equipment.
After you make the LAN cable/Wireless LAN
connection, the network setting is needed.
(> 18, Easy Network Setting)
LAN cable connection
Internet
Broadband
router, etc.
LAN (ethernet) cable
• Use category 5 or above straight LAN cables (STP) when
connecting to peripheral devices.
Wireless LAN connection
About wireless LAN connection (> 18, Easy
Network Setting)
• The unit is not compatible with public wireless LAN
services.
TV operation buttons
The TV can be operated from the TV operation
buttons of the remote control.
• Perform the setting if you cannot operate the TV
with the TV operation buttons.
While pressing [TV Í], enter the code with
the number buttons.
Manufacturer and Code No.
Manufacturer
Panasonic
AIWA
AKAI
BEKO
BENQ
BRANDT
BUSH
CENTREX
CURTIS
DAEWOO
DESMET
DUAL
ELEMIS
FERGUSON
FINLUX
FISHER
FUJITSU
FUNAI
GOLDSTAR
GOODMANS
GRADIENTE
GRUNDIG
HITACHI
IRRADIO
ITT
JVC
KDS
KOLIN
KONKA
LG
MAG
METZ
MITSUBISHI
Code
01/02/03/04
35
27/30
05/71/72/73/74
58/59
10/15
05
66
05
64/65
05
05
05
10/34
61
21
53
63/67
05/50/51
05
36
09
05/22/23/40/41
30
25
17/30/39/70
52
45
62
05/50/51
52
05/28/79
05/19/20/47
Manufacturer
NEC
NOBLEX
NOKIA
NORDMENDE
OLEVIA
ONWA
ORION
PEONY
PHILCO
PHILIPS
PHONOLA
PIONEER
PROVIEW
PYE
RADIOLA
SABA
SALORA
SAMSUNG
SANSUI
SANYO
SCHNEIDER
SEG
SELECO
SHARP
SIEMENS
SINUDYNE
SONY
TCL
TELEFUNKEN
TEVION
THOMSON
TOSHIBA
WHITE
WESTINGHOUSE
Code
36
33
25/26/27/60/61
10
45
30/39/70
05
49/69
41/48/64
05/06/46
05
37/38
52
05
05
10
26
32/42/43/65/68
05
21/54/55/56
05/29/30
05/69/75/76/77/78
05/25
18
09
05
08
31/33/66/67/69
10/11/12/13/14
52
10/15/44
16/57
05
MIVAR
24
YAMAHA
18/41
• If your TV brand has more than one code listed, select the
one that allows correct operation.
• If the brand of your TV is not listed or the code number is
invalid for your TV, this remote control is not compatible
with your TV.
TQBS0024
15
Getting started
Network connection
DMR-BST&BCT765&760EG_eng.book 16 ページ 2017年3月2日 木曜日 午後6時35分
[BCT765] [BCT760]
Easy Setting
The tuner in this unit is compatible with digital
Cable broadcast services and digital terrestrial
broadcast services.
• In these operating instructions,
[DVB-C] : indicates features applicable to digital
cable broadcasts (DVB-C).
[DVB-T] : indicates features applicable to digital
terrestrial broadcasts (DVB-T).
• This unit can receive only one of the two
services at a time.
Getting started
1
2
3
4
5
Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
Press [Í] on the remote control or [Í/I] on
this unit.
• The Easy Setting will start at the initial
power on.
Select language, then press [OK].
Select country, then press [OK].
Set “TV Signal Selection”.
• Select “Digital Cable Channels” or “Digital
Terrestrial Channels”, then press [OK].
1 [DVB-C]
Select the channel number allocation,
then press [OK].
• For Germany and Austria:
We recommend selecting “Preset
Channel Number”.
• For Switzerland:
We recommend selecting “Operator’s
Channel Number ( LCN )”.
• To change channel allocation, restart Auto Setup
in Basic Settings menu and change channel
number allocation selection. (> 85)
• If channel is not found, restart Auto Setup in Basic
Settings menu. (> 85)
• Switchover from DVB-T to DVB-T2 is scheduled.
(DVB-T2 is not supported by this unit.)
For details, check the relevant announcements
made by broadcast stations. (Germany only)
16
TQBS0024
2 [DVB-C]
Select “Start Auto Setup”, then press
[OK].
• Scan Mode
Quick
Full
• Frequency
Auto
The preset frequency will be
automatically used.
Manual
Enter the frequency specified by your
cable provider with number buttons.
• Network ID
Auto
The preset Network ID will be
automatically used.
Manual
Enter the Network ID specified by your
cable provider with number buttons.
• Frequency and Network ID settings may be
necessary depending on the cable provider. For
details, consult the cable provider.
DMR-BST&BCT765&760EG_eng.book 17 ページ 2017年3月2日 木曜日 午後6時35分
7
8
Auto Setup will start automatically.
(This operation may take some time.)
[DVB-C]
When tuning is completed, press [OK].
Clock will be set automatically.
If the clock setting screen appears, set the
time manually (> 96, Clock).
Set Quick Start to “On”, “Off” or “Timer
Setting for Quick Start”, then press [OK].
When “Easy Setting has been completed.”
appears, Easy Setting is complete.
To stop partway
Press [RETURN
].
[BST765] [BST760]
Easy Setting
1
2
3
4
5
6
To restart setup or change TV signal type
(> 85, Auto Setup)
Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
Press [Í] on the remote control or [Í/I] on
this unit.
• The Easy Setting will start at the initial
power on.
Select language, then press [OK].
Select country, then press [OK].
Select the search mode, then press [OK].
Select “DiSEqC” (Dual Tuner), “Single Cable
System” or “DiSEqC” (Single Tuner) then
press [OK].
Auto Setup starts.
These operations (Searching Satellite and
Searching Channels) may take some time.
After tuning has been completed, clock will
be set automatically.
If the clock setting screen appears, set the
time manually (> 96, Clock).
To confirm that channels have been tuned
correctly (> 28, Using Channel List)
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
7
Set Quick Start to “On”, “Off” or “Timer
Setting for Quick Start”, then press [OK].
When “Easy Setting has been completed.”
appears, Easy Setting is complete.
To stop partway
Press [RETURN
].
To restart setup (> 86, Auto Setup)
To confirm that channels have been tuned
correctly (> 28, Using Channel List)
• If tuning is cancelled partway through, it may not be
possible to receive the broadcast. Restart setup again.
TQBS0024
17
Getting started
6
DMR-BST&BCT765&760EG_eng.book 18 ページ 2017年3月2日 木曜日 午後6時35分
When selecting “Single Cable System” in
Step 6.
1 Select the “Single Cable Version”.
Single Cable Version
• Set User Band as required.
• Refer to the operating instructions for your single cable
router for information about each item.
Single Cable
Single Cable 2.0 (JESS)
Single Cable - EN50494:
Allow up to 8 user bands
Single Cable 2.0 (JESS) - EN50607:
Allow up to 32 user bands
Select
Confirm
RETURN
Getting started
• Select the setting that matches the version of
your equipment.
• Check the Single Cable Version setting in
advance.
Easy Network Setting
After completing “Easy Setting”, you can continue
with “Easy Network Setting”.
Follow the on-screen instructions to establish
your connection settings.
Select “Wired” or “Wireless”, then press [OK].
Easy Network Setting
Select a connection mode.
e.g.,
Unicable II
2 Make the settings of user band.
Wired
Wireless
OK
RETURN
User Band Settings
Start Auto Setup
Please confirm user band settings before starting Auto Setup.
Tuner 1
C1
User Band
1284 MHz
User Band Frequency
User Band PIN
Off
Tuner 2
C2
User Band
1400 MHz
User Band Frequency
User Band PIN
Off
Select
OK
RETURN
• User Band
You can set C1 to C8. (If you have selected
“Single Cable 2.0 (JESS)”, a value from C1
to C32 can be set.) Set to a User Band not
used by any other device.
• When only one User Band of the Router is
assigned, set “Tuner 2” to “OFF”. Note that
you will not be able to record two
programmes simultaneously.
• User Band Frequency
Set the User Band Frequency with number
buttons.
• User Band PIN
If the single cable router requires a PIN to
access an user band, enter the PIN.
• For details, read the manual of the single
cable router, etc.
3 Select “Start Auto Setup”, then press [OK].
18
TQBS0024
LAN cable connection (“Wired”)
Follow the on-screen instructions to apply your
connection settings.
Wireless LAN connection (“Wireless”)
Before beginning wireless connection setup
• Obtain your network name (SSID§1).
• If your wireless connection is encrypted, please
be sure that you know your encryption key.
• The default SSID§1, Password (Key) etc., may
be printed on the router.
e.g.,
SSID XXXXXXXXXXXX
KEY XXXXXXXXXXXX
PIN XXXXXXXXX
DMR-BST&BCT765&760EG_eng.book 19 ページ 2017年3月2日 木曜日 午後6時35分
Search for wireless network:
The available wireless networks will be displayed.
Select your network name and press [OK].
- If your Network name is not displayed, search
again by pressing the red button on the remote
control.
- Stealth SSID§2 will not be displayed. Enter
manually by using “Wireless Settings”. (> 92)
• If your wireless network is encrypted, Encryption
Key Input Screen will be displayed.
Input the encryption key of your network.
WPS (PUSH button):
If your Wireless router supports WPS (PUSH
button), you can easily perform the settings by
pressing WPS button on it.
WPS (Wi-Fi Protected Setup™) is a standard that
facilitates settings relating to the connection and
security of wireless LAN devices.
1 Press the green button on the remote control.
2 Press WPS button or corresponding button of
Wireless router until the lamp starts flashing.
• For details, refer to the operating instructions
of Wireless router.
3 Press [OK].
e.g.,
※3
Wireless
router
To restart Easy Network Setting
1 Press [FUNCTION MENU]. (> 25)
2 Select “Basic Settings” in “Setup”, then press
[OK].
3 Select “Easy Network Setting” in “Network”,
then press [OK].
To redo settings individually
If “Easy Network Setting” did not work properly or
when you change the settings individually,
perform the following steps:
1 Press [FUNCTION MENU]. (> 25)
2 Select “Basic Settings” in “Setup”, then press
[OK].
3 Select “Network Settings” in “Network”, then
press [OK].
4 Refer to “Network Settings”. (> 92)
Check security before using Home Network
function
If you set “Home Network function” to “On”, all
connected devices on the same network can
access this unit. Ensure that the router for your
home network has adequate security system to
prevent unauthorised access.
• Refer to the operating instructions of the hub or router.
• If you set “Home Network function” or “TV Anywhere” to
“On”, the setting for “Quick Start” is fixed to “On”.
• Do not use this unit to connect to any wireless network for
which you do not have usage rights.
During automatic searches in a wireless network
environment, wireless networks (SSID) for which you do
not have usage rights may be displayed; however, using
these networks may be regarded as illegal access.
• After performing network settings on this unit, the settings
(encryption level, etc.) of the Wireless router might change.
When you have trouble getting online on your PC, perform
the network settings on your PC in accordance with the
settings of Wireless router.
• Please be aware that connecting to a network without
encryption may result in the content of the communication
being illegitimately viewed by a third party, or the leaking of
data such as personal or secret information.
§1
§2
§3
SSID:
An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network.
Transmission is possible if the SSID matches for both
devices.
Depending on the settings of the wireless router, its SSID
may not be found. For details, refer to the operating
instructions for the wireless router.
The wireless router compatible with Wi-Fi Protected
SetupTM may have the mark.
TQBS0024
19
Getting started
Then follow the on-screen instructions and apply
the settings.
DMR-BST&BCT765&760EG_eng.book 20 ページ 2017年3月2日 木曜日 午後6時35分
HDD and media information
For more details, refer also to the specifications. (> 104)
Recordable/playable contents
(–: Impossible)
Media type
Built-in hard disk drive
(HDD)
Standard symbol
[HDD]
Recordable contents
•
•
•
•
•
Video
AVCHD/AVCHD 3D
MKV
MP4
MPEG2
Playable contents
• JPEG
• MPO
(3D photo)
•
•
•
•
•
•
•
AAC
ALAC
DSD
FLAC
MP3
WAV
WMA
Getting started
• Video§1
External hard disk drive
(USB HDD)
(> 23)
[USB_HDD]
–
BD-Video§4
[BD-RE]
BD-R
BD-R DL
[BD-R]
•
•
•
•
Video
AVCHD/AVCHD 3D
JPEG
MPO (3D photo)
•
•
•
•
Video
AVCHD/AVCHD 3D§2
JPEG
MPO (3D photo)
–
–
[DVD-V]
DVD-RAM
[RAM]
• Video
• JPEG
• MPO (3D photo)
–
• AVCHD§2
• Video
• AVCHD§2
DVD-R
DVD-R DL
[DVD-R]
–
TQBS0024
• MKV
• Video
DVD-Video§5
20
AVCHD/AVCHD 3D§2, 3
MKV
• AAC
MP4
• ALAC
MPEG2
• DSD
JPEG
• FLAC
MPO
• MP3
(3D photo)
• WAV
• WMA
• Video
–
[BD-V]
BD-RE
BD-RE DL
•
•
•
•
•
•
• MKV
• JPEG
• MPO
(3D photo)
•
•
•
•
•
•
•
AAC
ALAC
DSD
FLAC
MP3
WAV
WMA
DMR-BST&BCT765&760EG_eng.book 21 ページ 2017年3月2日 木曜日 午後6時35分
(–: Impossible)
Media type
DVD-RW
Standard symbol
Recordable contents
Playable contents
• Video
• AVCHD§2
[DVD-RW]
–
• Video
+R/+R DL
[+R]
+RW
[+RW]
–
•
•
•
•
AVCHD§2
MKV
JPEG
MPO
(3D photo)
–
• AVCHD§2
•
•
•
•
•
•
•
AAC
ALAC
DSD
FLAC
MP3
WAV
WMA
• Video
Audio CD (CD-DA)
Getting started
• Music
–
[CD]
CD
(including CD-R/RW)
USB memory
§1
§2
§3
§4
§5
–
[USB]
–
• MKV
• JPEG
• MPO
(3D photo)
•
•
•
•
•
•
• AAC
• ALAC
• FLAC
• MP3
• WAV
• WMA
AVCHD/AVCHD 3D§2, 3
MKV
• AAC
MP4
• ALAC
MPEG2
• DSD
JPEG
• FLAC
MPO
• MP3
(3D photo)
• WAV
• WMA
It cannot be recorded directly. (Only compatible with copying from the built-in HDD)
Recorded with AVCHD format compatible devices (Panasonic video camera, etc.). It may not be
able to play back, add, or edit depending on the device.
It cannot be played back directly from the USB HDD or USB memory. Playback is possible by
copying to the built-in HDD. (> 78)
Ultra HD Blu-ray discs cannot be played back.
Includes finalised DVD-R, DVD-R DL, DVD-RW, +R and +R DL.
• [+RW] This unit cannot record to 8X Speed +RW disc.
• With certain recording states and folder structures, the play order may differ or playback may not be possible.
• It may not be possible to play the above media in some cases due to the type of media, the condition of the recording, the
recording method, and how the files were created.
TQBS0024
21
DMR-BST&BCT765&760EG_eng.book 22 ページ 2017年3月2日 木曜日 午後6時35分
About extension of files
Information about contents
∫ Broadcast Recordings
Numbers of programmes that can be
recorded:
Maximum
Media
programmes
HDD
3000
BD-RE, BD-R
200
DVD-RAM, DVD-R, DVD-RW
99
+R, +RW
49
Getting started
• Maximum numbers of programmes are including
recordings of HD CAMCORDER.
∫ HD CAMCORDER Recordings
MPEG-4 AVC/H.264 (based on AVCHD)
Numbers of programmes that can be
recorded:
Maximum
programmes
3000
200
Media
HDD
BD-RE, BD-R
• Maximum numbers of programmes are including
recordings of Broadcast.
∫ Photo files
Compatible pixels:
Between 34k34 and 8192k8192 pixels
Sub sampling:
4:2:2, 4:2:0
(Motion JPEG is not supported.)
Maximum numbers of contents:
Media
HDD
BD-RE, BD-R,
DVD-RAM,
DVD-R, +R,
CD-R, CD-RW,
USB device
Folders
–
Files
20000
500
10000
∫ Video files/Audio files
Numbers of contents that can be copied to
internal HDD:
Contents
Video
Audio
Maximum numbers of
folders and files
20000
20000
USB device:
• Each folder can store up to 1000 files.
• We recommend that you limit the depth of
folder trees to about five levels.
• Bit rate up to 100 Mbps/resolution up to
3840k2160 25p/30p, 4096k2160 24p. (MP4
only)
22
TQBS0024
Contents
MKV
MKV
(Subtitle text files)
MP4
MPEG2
JPEG
MPO
AAC
ALAC
DSD
FLAC
MP3
WAV
WMA
Example of file
extension
“.mkv”
“.srt”
“.sub”
“.txt”
“.mp4”
“.mov”
“.mpg”
“.mpeg”
“.m2ts”
“.mts”
“.ts”
“.jpg”
“.mpo”
“.m4a”
“.m4a”
“.dsf”
“.dff”
“.flac”
“.mp3”
“.wav”
“.wma”
• The video file and subtitle text files are inside the same
folder, and the file names are the same except for the file
extensions.
• Some files may not be played back even if they have these
extensions.
DMR-BST&BCT765&760EG_eng.book 23 ページ 2017年3月2日 木曜日 午後6時35分
Recording mode (Picture Quality)
Picture Quality
Feature
DR
HG/HX/HE/HL/HM
Programmes can be
Recording can be done
recorded in a nearly
with reduced recording
perfect broadcasted state. volume in High definition
(HD) quality§2.
XP/SP/LP/FR§1
Recording can be done
with reduced recording
volume in Standard
definition (SD) quality.
Multiple audio
Subtitles /
Teletext
Record all multiple audio
Record only one audio
Can be recorded
Can be recorded (only one subtitle or teletext)§3
Surround audio Surround audio as the
broadcast
§1
§2
§3
Getting started
Recordable
media
Stereo audio
FR (Flexible Recording Mode):
The unit automatically selects the best possible recording rate between XP mode and LP mode.
The SD quality programme cannot be converted to HD quality.
You cannot select during play whether it appears or disappears.
Approximate recording times
Refer to “Recording modes (picture quality) and approximate recording times”. (> 105)
Notes
Notes for the USB device
You can use an external HDD (USB HDD) in the
following two ways (A single HDD cannot handle
those two ways simultaneously), and a USB
memory for data files.
• For recorded programmes
Moving programmes in the built-in HDD to a
USB HDD to save the capacity of the built-in
HDD.
• The USB HDD must first be registered on this
unit. (> 41)
• USB HDDs with a capacity smaller than
160 GB or greater than 3 TB cannot be used.
• Do not connect additional HDDs using a USB
hub.
• For details about connection method, refer to
the instructions supplied with the USB HDD.
• For data files
Playing back MP4, JPEG, MP3, etc. in a
USB device with this unit.
• The USB device must be formatted in FAT12,
FAT16, FAT32 or NTFS file system.
• The USB device over 2 TB is not usable.
• This unit supports USB 2.0 High Speed.
• This unit can use USB 3.0 devices as USB 2.0 devices
• This unit does not recognise USB HDDs other than those in
which the size of one sector is 512-bytes or 4096-bytes.
(For details, consult the dealer of your USB HDD.)
• This unit supports USB mass storage device class.
• This unit does not guarantee connection with all USB
devices.
TQBS0024
23
DMR-BST&BCT765&760EG_eng.book 24 ページ 2017年3月2日 木曜日 午後6時35分
Notes for the disc
• Region management information
The unit can play back BD-Video/DVD-Video
discs of the following regions codes, including
“ALL”:
• Operation and sound quality of CDs that do not conform to
CD-DA specifications (copy control CDs, etc.) cannot be
guaranteed.
e.g.,
• Do not touch the recorded surface of the discs.
• Wipe with a damp cloth and then wipe dry.
BD-Video
DVD-Video
Media handling
Getting started
DO
• Disc recorded on another device
• It may be necessary to finalise the disc, create
Top Menu or close the session on the
equipment used for recording to play on this
unit.
• [DVD-RW] Recorded in DVD Video Recording
(DVD-VR) format
- This unit can play back and copy to HDD.
- This unit does not support editing or
recording.
- It is possible to record and edit with
DVD-Video (DVD-V) format by formatting
discs with this unit.
• Recording may not be possible to discs which
were used for recording on other equipment.
• Play on other players
• [BD-RE] [BD-R] When these discs cannot be
played back on other Blu-ray Disc players,
etc., change the picture quality to play them
back. (e.g., programmes recorded in HE-AAC
audio format) (> 56, Picture Quality Change)
• [DVD-R] [DVD-RW] [+R] Finalisation is needed.
(> 82)
• [+RW] If the disc failed to play on other
equipment, we recommend you create a Top
Menu (> 83).
• [DVD-R] The disc created in AVCHD format can
only be played back on AVCHD compatible
equipment.
• Regarding 8 cm Disc
This unit cannot record or edit the 8 cm disc.
Only playback or copy to the HDD is possible.
• Discs that cannot be played
-
24
Ultra HD Blu-ray disc
DVD-RAM in a cartridge
2.6 and 5.2 GB DVD-RAM, 12 cm
DVD-Audio
Super Video CD, Super Audio CD, Video CD
TQBS0024
DO NOT
• Do not attach labels or stickers to discs.
• Do not use disc cleaning sprays, benzine,
thinner, static electricity prevention liquids or
any other solvent.
• Do not use the following discs:
- Discs with exposed adhesive from removed
stickers or labels (rental discs, etc.).
- Discs that are badly warped or cracked.
- Irregularly shaped discs, such as heart
shapes.
DMR-BST&BCT765&760EG_eng.book 25 ページ 2017年3月2日 木曜日 午後6時35分
FUNCTION MENU
screen
You can easily access the desired functions, such
as playback, timer recording, the unit’s settings
etc. via the FUNCTION MENU.
• Timer Recording (> 35)
• Network Service (> 72)
Press [FUNCTION MENU].
FUNCTION MENU
Keyword Recording
TV Guide
Timer Recording
Network Service
Contents on HDD
Home Network
Setup
Media
Copy Video
OK
RETURN
2
• TV Guide (> 28)
Select the item, then press [OK].
• Contents on HDD
- Recorded Programmes (> 42)
- Video ( AVCHD ) (> 42)
- Video ( MP4 / MKV ) (> 45)
- Photo (> 67)
- Music (> 71)
• Home Network
- Miracast (> 77)
- DLNA Client (> 75)
- Media Renderer (> 76)
- Wi-Fi Direct (> 76)
Getting started
1
FUNCTION MENU list
• Keyword Recording (> 38)
• Setup
- Basic Settings (> 84)
• You can change the unit’s settings of DVB
Tuning, Sound, Display, Connection,
Network etc.
- TV Anywhere (> 72)
- Wallpaper
Personalize a background of the FUNCTION
MENU.
• To select from among “Photo”, register photo
in advance. (> 67)
- BD-Video Data Management (> 47)
• Media
- Disc
- USB device
- USB HDD
• Copy Video
- Copy Menu (> 61)
- Copy Video (AVCHD) to DVD-R (> 66)
TQBS0024
25
DMR-BST&BCT765&760EG_eng.book 26 ページ 2017年3月2日 木曜日 午後6時35分
Watching
broadcasts
Watching broadcasts
Using channel information
1
While watching a programme
Press [STATUS ].
Channel information appears.
Watching broadcasts
2
Press [INPUT SELECT] and select “TV”,
then press [OK].

e.g.,
Press [CH W X] to select the channel.
• You can also select the channel by the
following operations.
- Using number buttons
- Using Channel List (> 28)
- Using TV Guide (> 28)
- Using channel information (> right)
To switch to the channel you have previously
watched
Press [LAST VIEW
].
• This function will work only for the channels you
have watched for more than 10 seconds.
10:30
NEWS
9:00 - 11:00
1
All DVB Channels
Now

Set timer
Change category
  
 Current Category
 Encrypted broadcast
3 Set timer (> 36, Timer recording from channel
information)
4 Subtitle
5 Teletext
6 Multiple audio/Sub Channel
7 Data service (Catch Up TV) (> 27)
To show detailed information
To switch to the radio channels or to the all
channels
Press [RADIO/TV].
• Selection of channel is made easy by creating a Favourite
of the channels. (> 84, 86, Favourites Edit)
To update the channel list
Refer to “Update Channel List”. (> 86, 87)
Press [STATUS
] again.
To hide the information screen
Press [EXIT
].
To change Category
Press the blue button.
To add your favourite channels
1 Press [OPTION].
2 Select “Digital TV Menu”, then press [OK].
3 Select “Favourites Edit”, then press [OK].
4 Refer to “Favourites Edit”. (> 84, 86)
To switch between the current programme
and the next programme
Press [2, 1].
To switch to another channel
Press [3, 4], then press [OK].
26
TQBS0024
DMR-BST&BCT765&760EG_eng.book 27 ページ 2017年3月2日 木曜日 午後6時35分
To show subtitle
If this unit requests a PIN
When “
Enter the PIN with the number buttons by
following the on-screen instructions.
• If you decide on a PIN, make a note it in case
you forgot it.
• PIN (except CAM’s) can be changed via “PIN
Entry”. (> 96)
• For CAM’s PIN, refer to your CAM’s operating
instructions.
Press [STTL
].
• Press again to hide subtitle.
To change subtitle language
1 Press [OPTION].
2 Select “Subtitle Language” in “Digital TV
Menu”, then press [OK].
3 Select the desired language.
• Press [EXIT
] to exit the screen.
• Some subtitle contents can be displayed using Teletext.
(> below)
If encrypted channels do not appear
To watch an encrypted broadcast, insert the CI
module into the CI slot. (> 9)
• Set “Common Interface”. (> 92)
To show the Teletext
To use data service (Catch Up TV)
When “
To use the data service function (Catch Up
Service), network connection and settings are
necessary. (> 15, 18)
• Set “HbbTV Setting” to “On”. (> 86)
” appears in channel information
1 Press [TEXT
].
• When the Teletext of data service is
displayed, press [TEXT
] again.
2 Use [3, 4, 2, 1], number buttons or colour
buttons, etc. according to on-screen
instructions.
• You can change the display mode. (> 91, Teletext)
Watching broadcasts
” appears in channel information
To select the data service, follow the on-screen
instructions. (e.g., “Press colour button.” etc.)
• Operations may vary depending on the broadcaster.
• For information about other disclaimers.
(> 107, About Network Service in “Disclaimer”)
Switching audio
Press [AUDIO].
• Audio will switch according to the contents of
the programme every time it is pressed.
To select the contents in the broadcast
When a programme includes audio signals etc.,
you can select signals.
1 Press [OPTION].
2 Select “Digital TV Menu”, then press [OK].
3 Select “Multi Audio” or “Sub Channel”, then
press [OK].
4 Select the item.
TQBS0024
27
DMR-BST&BCT765&760EG_eng.book 28 ページ 2017年3月2日 木曜日 午後6時35分
Using Channel List
Using TV Guide
You can select from the list of channel names.
1
Press [OK].
1
Press [GUIDE].
e.g. Landscape view
All DVB Channels
TV Guide
Sorting 123...
1
2
3
4
5
6
7
TUE 03.01
OPTION
Page up
8:30
9:00
9:30
Category: All DVB Channels
10:00
10:30
Hide
Channel names
RETURN
GUIDE
Portrait/Landscape
Timer Rec.
Page Up
Information
+24 hours
Page Down
Keyword Recording
Page down
RETURN
123/ABC
Watching broadcasts
8:00
OK
Select
View
2
Landscape
TUE 03.01.2017 8:05
8:00 - 9:45
Category
Encrypted channel
2
3
Select the programme, then press [OK].
Select “View”, then press [OK].
• Red: Sort the channel
• Blue: Change the category
• Green: Skip unwanted channels (> below)
To change TV Guide view
Press [GUIDE] to switch between “Landscape”
view and “Portrait” view.
Select the channel, then press [OK].
Page up/down
Press [CH W X].
To skip unwanted channels
The channel is skipped next time you select the
channel.
1 While the channel list screen is displayed,
select the unwanted channel.
2 Press the green button.
3 Press [OK].
To view a programme list for another day
Press the green button (Previous) or the yellow
button (Next).
To see programme information
Press [STATUS
].
[BCT765] [BCT760]
To retrieve the programme data for the area
where data have not been acquired
• [DVB-T] You cannot skip channels.
Select the area, then press [STATUS
• You can select the channel you have skipped with the
number button that corresponds to the channel.
• When you want to restore the skipped channel, edit the
channel list. (> 85, 86)
To edit the channel list
Refer to “Channel List”. (> 85, 86)
28
TQBS0024
].
To set a timer recording using the TV Guide
System (> 34)
To search the programmes (> 35)
DMR-BST&BCT765&760EG_eng.book 29 ページ 2017年3月2日 木曜日 午後6時35分
This unit temporarily saves a live TV programme
you are watching with this unit’s tuner on HDD.
REWIND LIVE TV
You can rewind live TV programme to the point
where temporary save has started (up to
1.5 hours).
• REWIND LIVE TV does not work when watching
a programme via external input.
While watching TV
Press [6] to rewind.
PAUSE LIVE TV
You can pause live TV programme and restart
watching from the paused position.
While watching TV
Press [;] to pause.
• The maximum amount of the temporary save is
1.5 hours.
• Temporary save stops in the following cases:
- When switching to other channels or other screen
- When the unit has started recording using all tuners
- When performing PAUSE LIVE TV or REWIND LIVE TV
for more than 8 hours (This may vary depending on the
HDD free space.)
• These functions do not work in the following cases:
- When the clock is not set
- When setting clock manually (Contents protected
programme (Retention limit) only) (> 10)
- When all tuners are being used to record programmes
- While copying
- While watching a programme being recorded
- When a radio programme is selected
- While watching an encrypted programme
- PAUSE LIVE TV:
When a timer recording via external input is started while
watching a programme via external input.
Display information
While pausing or rewinding a broadcast:
Press [STATUS
Pause
8:05
To stop REWIND LIVE TV or PAUSE LIVE TV
1 Press [∫].
2 Select “Yes”, then press [OK].
To hide the display information
Press [EXIT
9:35
8:50

To resume watching TV
Press [1 a1.3].
• You can perform search or Quick View, etc.
• If temporary save stops (> right), playback will
be performed by that point.
].


• Press [STATUS
] again.
8:50:55 03.01.2017
Play 8:50.50

While pausing a programme via external input:
Press [STATUS

] twice.
8:50:55 03.01.2017
Play 8:50.50
].

 The time that you can rewind the live
programme.
 The amount of time temporarily saved on
HDD.
3 The time of the current playback position.
TQBS0024
29
Watching broadcasts
REWIND LIVE TV/PAUSE LIVE TV
DMR-BST&BCT765&760EG_eng.book 30 ページ 2017年3月2日 木曜日 午後6時35分
Recording
Recording TV
programmes
• This unit can record two programmes being
broadcasted at the same time.§
• About CI Plus restriction (> 10)
• Notes for recording of an encrypted broadcast
(> 32)
Preparation
You can change the recording mode (picture
quality) (> 31)
1
2
Recording
3
Select the channel to record.
To set the recording time
Press [REC ¥].
Recording will start.
Select “Automatic Stop”, then press
[OK].
• One touch recording (OTR)
Recording stops automatically when the
programme ends.
REC1/OTR
8:00 - 8:45
Automatic Stop at 8:45
Recording Time
30 min
Continuous recording
§
30
• If a timer recording reaches its start time when all tuners
are being used for recording, the recording (OTR) of one of
the programmes terminates.
• Data service will not be recorded.
• Following contents or media cannot be played back while
recording.
- video file
- photo
- USB HDD (For data files, > 23) and USB memory
• Copying cannot be performed while recording.
• When “Automatic Standby after OTR” is set to “On” (> 95),
this unit is turned to standby mode if this unit is not
operated for approximately 5 minutes after completing
“Automatic Stop” or “Recording Time”.
• The picture quality of encrypted programmes is not
changed until they are decrypted. (> 32)
[BST765] [BST760]
The number of programmes that can be
simultaneously recorded varies depending on
the setup environment. (> 12)
TQBS0024
1 Select “Recording Time” or “Continuous
recording” in step 3 (> left).
Recording Time:
You can set the length of recording time from
30 minutes to 4 hours.
• You can select the recording time with
[2, 1].
2 Press [OK].
DMR-BST&BCT765&760EG_eng.book 31 ページ 2017年3月2日 木曜日 午後6時35分
To change the recording mode (picture
quality)
This unit can record programmes in DR mode and
then automatically change their recording mode
(picture quality) to another setting while in
standby mode.
1 Press [OPTION].
2 Select “Recording Mode”.
3 Select the recording mode (picture quality),
then press [OK].
• Recording mode (Picture Quality) (> 23)
Recording Mode ( Picture Quality )
HDD Remain
h
To check the recording programme
Press [STATUS
].
e.g., While recording two programmes simultaneously
HDD
REC1/OTR AUTO
5
Recording programme
displayed on the TV
REC2
Recording programme not displayed on the TV
m (DR)
DR(Original)
HG
High
Definition
Operation during Recording
To stop recording
Press [∫].
HX
HE
When recording one programme:
If the following screen appears
HL
HM
XP
SP
Stop Recording
LP
OK
RETURN
• The recording mode (picture quality) set
here is used as the default value for the
next recording.
To change the recording mode (picture
quality) after recording in DR mode (> 56,
“Picture Quality Change”)
To check to see if the recording mode (picture
quality) change is finished (> 57)
To cancel the recording mode (picture quality)
change (> 56)
Recording
Standard
Definition
1
Recording of this programme is in progress.
Stop this recording ?
Yes
No
OK
RETURN
Select “Yes”, then press [OK].
When recording two programmes:
Following screen appears
Stop Recording
2 recordings are in progress.
Which recording would you like to stop ?
1
• Programmes in the original picture quality (DR mode) will
be deleted after their recording mode (picture quality) is
changed.
• It takes about the same amount of time as recording to
change the recording mode (picture quality).
• When the HDD does not have enough remaining space, the
recording mode (picture quality) change function does not
operate.
• A recording mode (picture quality) change stops when this
unit is turned on. The process will start from the beginning
again after the unit is switched to standby mode.
• Even if you change the recording mode (picture quality) of a
programme, its audio and subtitle settings will remain the
same as those at the start of recording.
• When the recording mode (picture quality) of a programme
recorded in DR mode is changed, teletext recorded with the
programme will be lost.
2
OK
RETURN
1 Select the programme, then press [OK].
2 Select “Yes”, then press [OK].
TQBS0024
31
DMR-BST&BCT765&760EG_eng.book 32 ページ 2017年3月2日 木曜日 午後6時35分
To pause recording
After displaying the recording programme, press
[;].
• Press again to restart recording.
(A programme is not split into separate
programmes.)
• Timer recording programme cannot be paused.
Notes for recording of an encrypted
broadcast
This unit allows you to record/view/play an
encrypted programme by decryption using a
supporting CI module.
Recording of encrypted broadcast
The recording of encrypted broadcasts differs
according to the “Recording for Encrypted
Channel” (> 88) settings as follows.
To record two programmes simultaneously
While recording, perform steps 1–3 on page 30.
Simultaneous rec and play
Automatic
You can play the recording programme from the
beginning or the programmes previously recorded
to the HDD.
Decrypt
Recording
1 Press [VIDEO MENU].
Recording
Channel
Date
04.10
04.10
29.10
Title Name Name
Programme
29.10 9:00
Movie
Duration 0:10(D
“[ (red)” is displayed on the recording
programme.
2 Select the programme, then press [OK].
32
TQBS0024
§1
Supporting CI
module is
inserted
Record
(Decrypted)§1
Record
(Decrypted)
Supporting CI
module is not
inserted
Record
(Encrypted)
Recording
impossible
Depending on the specifications of the CI
module, the broadcast may be recorded in the
encrypted form.
DMR-BST&BCT765&760EG_eng.book 33 ページ 2017年3月2日 木曜日 午後6時35分
Two programmes (e.g., “A” and “B”) which need
the same CI module for decryption will be
recorded/viewed/played as follows:
When “Automatic” is selected
Programme
“A”
“B”
While recording
programme “A”, start
Record
Record
recording programme (Decrypted) (Encrypted)
“B”.
While viewing/playing
Viewing/
Record
programme “A”, start
playing
(Encrypted)
timer recording
possible
programme “B”.
While recording
Viewing/
Record
programme “A”,
playing
view/play programme (Encrypted§2)
possible
“B”.
When you start viewing/playing programme
“B”, the decrypted recording of programme “A”
switches to encrypted recording. You need to
decrypt programme “A” to play it.
When “Decrypt Recording” is selected
§2
Programme
“A”
“B”
While recording
programme “A”, start
Record
Recording
recording programme (Decrypted) impossible
“B”.
While viewing/playing
Viewing/
Record
programme “A”, start
playing
timer recording
(Decrypted)
impossible
programme “B”.
Viewing/
While recording
Record
playing
programme “A”, view/play
(Decrypted)
impossible
programme “B”.
Encrypted programmes
Programmes recorded in encrypted form (
)
have the following restrictions:
- The encrypted programme can be played back,
but it does not mean that it is decrypted and
saved in the decrypted form.
- Depending on the programme, it may not be
possible to play back/decrypt after recording.
- There are restrictions on the playback and
editing of encrypted programmes.
- To copy an encrypted programme, decryption
must be performed.
Decryption
Decryption is performed when the unit is turned
off. It will take about the same time as the
recorded duration.
“COPY” on the front panel display remains lighted
during decryption.
It is also possible to decrypt manually
Refer to “Programme Decryption”. (> 57)
• To decrypt, insert the CI module into the CI slot (> 9). During
decryption, do not remove the CI module from this unit.
• The programme before decryption will be deleted once
decryption is completed.
• When the HDD does not have enough remaining space,
decryption will not start.
• This function is stopped when this unit is turned on.
Decryption will start from the beginning again once the unit
is turned off.
• When a decryption fails,
- decrypt the programme manually. (> 57)
- if the screen icon changes from “
” to “
”, the
programme is copy protected by the CI Plus CAM. Editing
of the programme is not possible except for deletion.
When you encounter this problem, delete the
programme.
TQBS0024
33
Recording
2 encrypted programmes simultaneous
recording/viewing/playing
DMR-BST&BCT765&760EG_eng.book 34 ページ 2017年3月2日 木曜日 午後6時35分
Timer recording
• You can enter up to 32 programmes within a
month in advance. (Each daily or weekly
programme is counted as one programme.)
• This unit can record two programmes being
broadcasted at the same time.§
• About CI Plus restriction (> 10)
• Notes for recording of an encrypted broadcast
(> 32)
Preparation
You can change the recording mode (picture
quality) (> 31)
1
Recording
2
§
Press [GUIDE].
TV Guide screen appears.
Select the programme, then press the
red button.
The timer icon “F” (red) is displayed.
• If on-screen instructions are displayed,
follow them.
To edit the timer recording on the TV Guide
screen
1 Select the programme to edit, then press the
red button.
2 Select “Timer Rec Edit”, then press [OK].
3 Go to step 3 on page 35, “Manually
programming timer recording”.
To cancel a timer recording on the TV Guide
screen
1 Select the programme to cancel, then press
the red button.
2 Select “Timer Rec Cancel”, then press [OK].
(“F” disappears)
If “Overlapped Timer Recording” screen
appears
Overlapped Timer Recording
Timer programme overlaps with others.
Some part or all of programmes may not be recorded completely.
Keep
[BST765] [BST760]
The number of programmes that can be
simultaneously recorded varies depending on
the setup environment. (> 12)
Change
To resolve an Overlapped Timer Recording
1 Select “Change”, then press [OK].
2 Follow the on-screen instructions.
Overlapped Timer Recording
Please delete unnecessary programme to resolve.
• Some broadcasters may not send programme information.
When programme information is not displayed correctly,
use manual timer recording. (> 35)
• The receipt of the TV Guide data via Set Top Box is not
possible.
• When timer recording from the external equipment, use
manual timer recording. (> 35)
• You can set the start and finish time to make the timer
recording work successfully. (> 88, Timer Record Start
Buffer, Timer Record Stop Buffer)
To use TV Guide system (> 28)
Operation during Recording (> 31)
34
TQBS0024
New Programme
WED 11.10
9:00 - 9:45
TWO Wales
WED 11.10
9:20 - 9:55
Holiday
WED 11.10
9:00 - 9:30
Animals
Existing Programmes
OK
RETURN
Delete
Red:
Yellow:
Confirm
Delete programme
Exit (Overlapping is not resolved)
DMR-BST&BCT765&760EG_eng.book 35 ページ 2017年3月2日 木曜日 午後6時35分
To use Signal Supported Recording
The recording’s start and stop times can be
controlled by the broadcaster, e.g. delayed start.
• To use this function, set “Signal Supported” to
“ON”. (> 36)
• The Signal Supported Recording function may
not work if you manually change the start time or
the stop time over 10 minutes.
Manually programming timer
recording
1
Display the Timer recording list.
1 Press [FUNCTION MENU].
2 Select “Timer Recording”, then press
[OK].
Timer Recording
HDD
30:30 DR
Channel Name
Schedule
New Timer Programme
TUE 03.01.2017 8:05
Mode
Space
• If the signal is not sent correctly, the recording may lack the
beginning or the ending part of the programmes.
2
3
4
Select “New Timer Programme”, then press
[OK].
Select the items and change the items.
(> 36, Timer recording options)
Press [OK].
The timer programme is stored.
Timer Recording
Channel Name
Programme Name
HDD 30:30 DR
Schedule
WED 04.01
8:00 - 9:00
TUE 03.01.2017 8:05
Mode
Space
DR
OK
New Timer Programme
To confirm and edit the timer programme
(> 37)
Operation during Recording (> 31)
• When recording from the external equipment, “Mode”
[recording mode (picture quality)] is XP, SP, LP or FR.
• Signal Supported Recording is disabled when a manually
programmed timer recording is set.
• Category may not be assigned correctly depending on the
programme information.
• “Keyword Search”, “Programme Type Search” and
“Category Selection” search the First 250 channels on “All
DVB Channels”.
TQBS0024
35
Recording
To search the programmes
1 On the TV Guide screen:
Press [OPTION].
2 Select the item below, then press [OK].
Keyword Search
Displays programmes including the input
keyword.
• Refer to “Entering text”. (> 83)
Programme Type Search
Displays programmes of the selected type.
If, for example, you select “Art/Culture”, only
the programmes related to arts and culture are
displayed. Use this search function to find the
programme you want to watch quicker.
• Select the programme type, then press [OK].
Category Selection
Displays channels in the selected category.
(Radio etc.) You can find the programme you
want to watch quicker by narrowing down the
channels to be displayed.
• To return to the previous TV Guide list
Select “All DVB Channels”.
3 Select the programme, then press the red
button for timer recording.
DMR-BST&BCT765&760EG_eng.book 36 ページ 2017年3月2日 木曜日 午後6時35分
Timer recording options
Select the items and change the settings.
Timer recording from channel
information
You can make timer recording of the current or
next programme.
e.g.,
Timer Recording
HDD 30:24 DR
TUE 03.01.2017 8:05
Signal Supported : OFF
Channel Day/Date
1
WED 07.01
Start
8:00
Stop
9:00
Mode
DR
XP
Subtitles
OFF
1
While watching a programme
Press [STATUS ].
e.g.,
Programme Name
1
Channel
You can select Category/AV with the red button.
Recording
Day/Date
You can select “Date” or “Weekly” by pressing the
green button.
Auto Renewal Recording
(Only daily/weekly timer recording)
The unit will record the new programme over the
old one.
Press the yellow button.
“Renew : ON” is displayed.
Start/Stop
Press and hold [3, 4] to alter in 15-minute
increments.
Mode
Refer to “To change the recording mode (picture
quality)” (> 31).
Subtitles
You can choose whether or not to record subtitles
when the picture quality is changed.
(Only when item other than “DR” is selected in
“Mode”)
Programme Name
1 Select “Programme Name”, then press [OK].
2 Refer to “Entering text”. (> 83)
To use Signal Supported Recording
You can choose whether or not to use the Signal
Supported Recording function by pressing the
blue button.
36
TQBS0024
Now
2
3
4
10:30
NEWS
9:00 - 11:00
All DVB Channels
Set timer
Change category
Display the channel information of a
programme to record.
• Switch the programme with [2, 1].
• Switch the channel with [3, 4].
Press the yellow button.
Go to step 3 on page 35, “Manually
programming timer recording”.
DMR-BST&BCT765&760EG_eng.book 37 ページ 2017年3月2日 木曜日 午後6時35分
• When the recording mode (picture quality) of a
programme recorded in DR mode is changed,
teletext recorded with the programme will be
lost.
• Data service will not be recorded.
• (Only when recording broadcast in other than
DR mode)
This unit can record programmes in DR mode
and then automatically change their recording
mode (picture quality) to another setting while in
standby mode. The recording mode (picture
quality) of encrypted programmes will be
changed after they are decrypted.
• When you programme successive timer
recordings to start, about last 1 minute of earlier
programme will not be recorded.
• Timer recording will not start while:
- copying a programme by using Copy (Keep
Picture Quality) [to a finalised disc or a disc
with a Top Menu ([+RW])]
- copying a programme in Copy (Change
Picture Quality) mode
- changing the recording mode (picture quality)
of a programme in “Picture Quality Change”
(only when “Now” is selected)
- copying HD Video (AVCHD) from USB device
- copying video/photos/music files
- formatting
- finalising/creating Top Menu
• When “Pure Sound mode” is activated, timer
recording does not start during playback of
BD-Video, DVD-Video or music CD. (> 88)
• When the recording mode (picture quality) of a
programme recorded in DR mode is changed,
its new audio and subtitle language settings will
be determined by the following settings:
- “Multi Audio” and “Subtitles” in “Preferred
Language” (> 86, 87)
To confirm and edit a timer
programme
1
Display the Timer recording list.
1 Press [FUNCTION MENU].
2 Select “Timer Recording”, then press
[OK].
e.g.,
Timer Recording
HDD 30:30 DR
Channel Name
TUE 03.01.2017 8:05
Schedule
Guide
Guide
Mode
MON 13.01
11:00 - 11:45
MON 13.01
10:00 - 11:50
MON 13.01
11:30 - 1:00
TUE 07.01
8:00 - 10:45
Space
DR
OK
HG
OK
DR
DR
New Timer Programme
OK
RETURN
Delete
2
Info
Total 3/32
Resolve overlap
Turn
Timer Off
Keyword List
Page Up
Page Down
Select the programme, then perform the
operations.
• Red: To delete a timer programme
• Green:
To resolve an overlap timer programme
- The overlapped timer recording list will
appear. (> 34)
• Yellow:
To deactivate a timer programme
- The timer icon “F” will change from red to
grey.
- Press the yellow button again to activate
timer recording standby. (The timer icon
“F” will change to red.)
• [STATUS ]: Show programme
information
To edit a timer programme
1 Press [OK].
2 Change the timer recording options.
• Refer to “Timer recording options”.
(> 36)
3 Press [OK].
To exit the timer recording list
Press [EXIT
].
TQBS0024
37
Recording
Notes on timer recording
DMR-BST&BCT765&760EG_eng.book 38 ページ 2017年3月2日 木曜日 午後6時35分
Screen icons
Red: Timer recording standby is
activated.
Grey: Timer recording standby is
deactivated.
[
(Red)
Currently recording programme
A part or all of the programme will not
be recorded since the programme is
overlapping.
The HDD is full.
Copy-protected programme
It was not recorded.
The recording of the programme was
not completed because of some
reason.
Recording
Auto Renewal Recording is set
(> 36).
Keyword Recording
The unit can find programmes that include
specified keywords from programme names and
programme information on TV Guide, and record
the programmes automatically.
• This unit can record two programmes being
broadcasted at the same time.§
• Restrictions on CI Plus and encrypted programmes
that apply when recording programmes also apply to
this function. (> 10, 32)
• Notes on timer recording (> 37)
1
2
Signal Supported Recording (> 36)
Displayed if timer recording of two
encrypted programmes is
overlapping.
(When “Recording for Encrypted
Channel” is set to “Decrypt
Recording” only) (> 88)
A part or all of the programme will not
be recorded since the encrypted
programme is overlapping.
On the TV Guide screen:
Select the programme for keyword
recording and press the blue button.
Select the items and change the items if
necessary.
• Refer to “Keyword Recording conditions”.
(> 39)
e.g.,
Keyword Recording
FRI 06.01.2017 20:01
Please specify Search Conditions and Recording Settings. To activate, select “Set”.
Search Conditions
Olympic
Keyword 1
Search Target
Extra Word Settings
Search Channel
Programme Name only
First 250 Channels
Detail Search Condition
Recording Settings
OK
Set
Cancel
RETURN
Search
Displayed if the recording can fit in the
remaining space
OK
(Date)
Daily or weekly timer programme is
set.
• The timer remains active until the
date indicated below
.
It may not be possible to record
because:
- there is not enough space left.
- the number of possible programmes
has reached its maximum. (> 22)
- programmes are deactivated, etc.
• Programmes to be recorded with Keyword recording
(> right) are not displayed.
38
TQBS0024
3
4
§
Select “Set”, then press [OK].
Press [OK].
The Keyword Recording icon “F” (blue) is
displayed on the TV Guide screen.
[BST765] [BST760]
The number of programmes that can be
simultaneously recorded varies depending on
the setup environment. (> 12)
• Programmes that are set to be recorded automatically with
Keyword Recording are not displayed on the Timer
Recording confirmation screen. (> 37) (> 39, “To display
the list of programmes found with the set keyword”)
• When a search brings up too many programmes, we
recommend revising the search settings.
• On the TV Guide screen, up to 128 programmes are
displayed with the Keyword Recording icon “F” (blue).
DMR-BST&BCT765&760EG_eng.book 39 ページ 2017年3月2日 木曜日 午後6時35分
Search Conditions:
Keyword 1-16
Input the keyword to be registered.
• Refer to “Entering text”. (> 83)
• Default keyword is the programme title
selected on the TV Guide screen.
If the programme title includes its episode
number, etc., delete the number before
registering the title.
Search Target
Select the search target.
Extra Word Settings
1 Add up to two keywords and two excluded
words to refine search conditions.
2 Select “Set”, then press [OK].
Search Channel
The Keyword Recording function can search
the First 250 channels listed on “All DVB
Channels” or the First 50 channels registered
for “Favourites1”.
• When setting “First 50 Favourites1” as a
search target, register the channels you want
to search with Keyword Recording to the First
50 channels of “Favourites1” in advance.
(> 84, 86)
Detail Search Condition
Set the detailed search condition. Narrow down
programmes with specified criteria to search for
only the programme you want to record.
Programme Type
Select the programme type. If, for example,
you select “Art/Culture”, only the programmes
related to arts and culture are searched.
Free Services Only Record
Select whether to limit the search to free
programmes or to include pay-per-view
programmes in the search.
Video Format
Select whether to include HD and/or SD
programmes in the search.
Remove Duplicates
When there are multiple programmes with the
same title, start time and length, only the
programme closest to the top of the channel
list will be recorded.
Recording Settings:
Recording Mode (Picture Quality)
Refer to step on page 30, “Recording TV
programmes”.
Subtitle
You can choose whether or not to record the
subtitle at conversion.
[Only when item other than “DR(Original)” is
selected in “Recording Mode (Picture Quality)”]
Signal Supported Recording
You can choose whether or not to use the
Signal Supported Recording function. (> 35)
To display the list of programmes found with
the set keyword
Press the yellow button in “Keyword Recording”
screen.
SAT 18.10
Schedule
Programme Name
2
ABC1
7:00-7:30
Olympic opening ceremony
23
ABC2
7:00-8:00
Olympic opening ceremony
22
ABC1
9:00-11:30
ABC2/4
7:00-7:30
Olympic Judo
ABC1
9:00-10:30
Olympic Boxing
2
22
Olympic Soccer
F Blue: Recording has already been set with a
different Keyword.
F Red:
Timer recording standby is activated.
Priority order of Keyword Recording
Recording takes place in the following order of
priority:
1 A programme that is already being recorded
2 Timer Recording
3 Keyword Recording (programmes will be
recorded in ascending order from keyword
number 1 to 16)
4 A programme that starts first
Keyword Recording may not work in some cases.
To avoid recording failure, we recommend using
Timer Recording instead of Keyword Recording.
Changing the recording method
Select the programme marked “F” (Blue), then
press the red button on the Keyword Recording
status screen or TV Guide screen. (> left)
• Programmes set for timer recordings are not treated as
Keyword Recording programmes.
TQBS0024
39
Recording
Keyword Recording conditions
DMR-BST&BCT765&760EG_eng.book 40 ページ 2017年3月2日 木曜日 午後6時35分
Automatic deletion of Keyword Recording
By default, when the HDD capacity is low, the unit
automatically deletes programmes recorded with
Keyword Recording, starting from the one with the
oldest recording date.
Perform the following not to delete them as
necessary. (> 45)
- Protect programmes.
- Change automatic delete settings.
- Remove programmes from “Keyword Record”.
- Copy programmes before deleting them.
To search programmes matched with any of
the registered keywords
Press the yellow button.
To play programmes recorded with Keyword
Recording
Press the green button.
• Refer to “Playing Keyword Recording
programmes” (> 45)
To delete the registered Keyword
Keyword List operations
1 Select the Keyword, then press the red button.
2 Select “Yes”, then press [OK].
Display the Keyword List
You can also set keywords from FUNCTION
MENU.
Recording
1 Press [FUNCTION MENU].
2 Select “Keyword Recording”, then press [OK].
Keyword Recording
FRI 06.01.2017 20:01
The programme including keyword is searched every day and timer registration is carried out automatically.
Keyword 1
Keyword 2
Keyword 3
Keyword 4
Keyword 5
Keyword 6
Keyword 7
Keyword 8
World cup
Soccer
Premier League
Olympic
--- (No Keyword)
--- (No Keyword)
--- (No Keyword)
--- (No Keyword)
OK
OPTION
RETURN
Delete
Video Menu
All Keywords Search
Timer Recording
To add/edit the Keyword
Select the Keyword and press [OK], then make
required settings.
• Refer to “Keyword Recording conditions” (> 39)
To deactivate the Keyword Recording
1 Select the Keyword, then press [OPTION]
button.
2 Select “Turn Keyword Off”, then press [OK].
• Select “Turn Keyword On” in step 2 to return to
Keyword Recording standby mode.
40
TQBS0024
To change the recording priority of keywords
• Refer to “Priority order of Keyword Recording”
(> 39)
1 Press [OPTION].
2 Select “Change Priority”, then press [OK].
3 Press [3, 4] to shift the position, then press
[OK].
DMR-BST&BCT765&760EG_eng.book 41 ページ 2017年3月2日 木曜日 午後6時35分
§
§
“For recorded programmes (> 23)” only
If you intend to move recorded programmes to a
USB HDD, the USB HDD must be registered to
this unit first.
Limitation information
• Registering of a USB HDD will format the
USB HDD and all the content already recorded
will be deleted.
• Up to eight USB HDDs can be registered on this
unit. If you have already registered eight
USB HDDs, it will be necessary to delete one or
more of them before registering a new
USB HDD.
• Registered USB HDDs cannot be used with
devices other than this unit.
Regarding the external HDD (USB HDD)
• Certain non-confirmed USB HDDs cannot be
used with this unit.
• If a problem occurs with the USB HDD, please
contact the manufacturer of the device.
Registering the USB HDD
• If the registering screen appears when
connecting the USB HDD, go to step 5.
1
2
3
4
5
6
7
Press [FUNCTION MENU].
Select “Basic Settings” in “Setup”, then press
[OK].
Select “Settings for USB HDD” in “HDD /
Disc / USB HDD”, then press [OK].
Select “USB HDD Registration”, then press
[OK].
Select “Yes”, then press [OK].
When the registering is complete, message
screen appears.
Press [OK].
The confirmation screen appears.
Press [OK].
Recording
Using the external
HDD (USB HDD)
To cancel all USB HDD registrations (> 89)
• It is not possible to play back the content on the USB HDD
whose registration has been cancelled.
• You can check the registration number of the USB HDD on
the Video Menu. (> 42)
Connecting the USB HDD
Connect this unit with optional USB HDD.
e.g.,
This unit’s rear panel
Disconnecting the USB HDD
Disconnecting without following this procedure
may result in the loss of recorded content from
the USB HDD or the internal HDD.
1
2
3
4
USB HDD
• Only one USB HDD (For recorded programmes, > 23) can
be connected.
• The USB HDD can be connected to the USB port on the
rear of this unit.
5
6
Press [FUNCTION MENU].
Select “Basic Settings” in “Setup”, then press
[OK].
Select “Settings for USB HDD” in “HDD /
Disc / USB HDD”, then press [OK].
Select “USB HDD Disconnection”, then
press [OK].
Select “Yes”, then press [OK].
Disconnect the USB HDD from this unit.
TQBS0024
41
DMR-BST&BCT765&760EG_eng.book 42 ページ 2017年3月2日 木曜日 午後6時35分
Playing
back video
Playing programmes
on the HDD
Video Menu screen
e.g.,

§
Keyword Record
§
1
2
“For recorded programmes (> 23)” only
Not Viewed
Movie
Date
Social/Economic
AVCHD
Programme Name
29.10
Movie
Duration 0:01(DR)
RETURN
To play recorded programmes:
Select “Recorded Programmes”, then
press [OK].
The Video Menu screen appears (> right).
To play HD Video (AVCHD):
Select “Video ( AVCHD )”, then press
[OK].
The AVCHD tab appears on the Video Menu
screen (> right).
To play video files:
Select “Video ( MP4 / MKV )”, then press
[OK].
The video list screen appears (> 45).
Select the programme, then press [OK].
Page Up
Page
Page Down
Select
Delete
OK
TQBS0024
9:00
Play
RETURN
Recorded Programmes
Video ( AVCHD )
Video ( MP4 / MKV )
Photo
Music
Playing back video
Time Remaining 45:54 (DR)
All
Select “Contents on HDD”, then press
[OK].
Recorded programmes can be played.
42

Press [FUNCTION MENU].
Contents on HDD
4

Grouped Programmes
Channel
e.g.,
3

Video Menu
HDD
Copy
 Tab (> 44)
 Programme type
3 Keyword Recording
Refer to “Playing Keyword Recording
programmes” (> 45)
4 AVCHD tab
• [USB_HDD] When connecting registered
USB HDD, “USB HDD” tab and registration
number appears.
Select “USB HDD” tab.
e.g.,
Video Menu
USB-HDD
USB HDD
Grouped Programmes
Time Remaining 45:54 (DR)
Keyword Record
All
Not Viewed
Registration number 1
Movie
Social/Economic
AVCHD
DMR-BST&BCT765&760EG_eng.book 43 ページ 2017年3月2日 木曜日 午後6時35分
• Encrypted programme
• Programme has failed to be
decrypted.
Screen icons
Currently recording programme
Protected programme
t
§
§
• Programme was not recorded due
to recording protection
• Recording did not complete as the
timer recording has started.
Programme cannot be played.
(When data is damaged etc.)
Programme is copy protected. (One
generation copy is permitted)
Programme requires a CAM with a
playback licence to play back.
• The number of times the
programme can be played back
may also be limited.
Programme cannot be played back
when a certain time has elapsed after
the recording.
The icon turns grey after the
playback period has passed.
• Playback period limit can be
checked in the information of that
programme. (> 44, Showing
Information)
§
Programme is copy restricted.
§
Programme requires a CAM with a
playback licence to play back. If a
certain time has elapsed after the
recording, the programme cannot be
played back.
• The number of times the
programme can be played back
may also be limited.
(Grey)
- Press [STATUS ] to show the
reason of the failure.
Programme cannot be played back,
edited (except deleting) or copied.
Delete the programme. (> 54)
Grouped programmes
[
(Blue)
Programme has not yet been played.
Programme is recorded using a
different system from that of the unit.
Change the “TV System” (> 91).
Radio programme
3D contents
Recorded in 1080/50p contents
Recorded in 1080/60p contents
• Programme has a rating level set
by the CAM.
• [BCT765] [BCT760] Programme is
restricted by Child Lock List or
Parental Rating (> 86).
Keyword recording programme
which has not yet been played
Grouped Keyword recording
programmes
Keyword recording programme
which has already been played
Notification icon for a new Keyword
Recording
§
Programme cannot be edited (except deleting)
or copied.
TQBS0024
43
Playing back video
[
(Red)
DMR-BST&BCT765&760EG_eng.book 44 ページ 2017年3月2日 木曜日 午後6時35分
Tab
Editing the grouped programmes
You can quickly find the recorded programmes by
selecting the tab.
1 Select the programme or the group, then press
the yellow button.
• A check mark is displayed. Repeat this step.
• Press the yellow button again to cancel.
2 Press [OPTION].
3 Select the item below, then press [OK].
Create Group:
Selected programmes are bundled to form a
group.
Release Grouping:
All the programmes in the group are released.
Remove:
Selected programmes are removed from the
group.
To select the tab
Press [2, 1].
To change the displayed programme type tab
1 Select the programme type, then press the
green button.
2 Select the item, then press [OK].
Showing Information
Playing back video
Select the programme, then press [STATUS
].
Showing grouped programmes
Playback from Chapter View
1 Press [OPTION].
2 Select “Grouped Programmes” or “All
Programmes”, then press [OK].
Grouped Programmes:
• Two or more programmes recorded in the
daily/weekly timer recording mode are
bundled and displayed as one item.
• Two or more Keyword recording
programmes recorded from the same
Keyword.
1 Select the programme, then press [OPTION].
2 Select “Chapter View”, then press [OK].
All Programmes
1 On the Grouped Programmes screen:
or
.
2 When playing all programmes:
Press [1 a1.3].
• This function cannot be used if the group includes any
encrypted programme (
).
When playing the individual programme:
Press [OK] and select the programme, then
press [OK].
44
TQBS0024
Play
Press OK to start playing from
the selected chapter.
Selected chapter can be edited
via OPTION.
Press RETURN to go back to
previous menu.
0:12.29
001
0:00.00
Play
RETURN
Delete
Page 001/001
Edit Chapter Mark
Select
3 Select the chapter, then press [OK].
Playing back grouped programmes
Select the item marked with
e.g., [HDD]
To edit the chapter in Chapter View
Refer to “Editing chapters”. (> 58)
• If the programme is recorded in the encrypted form, the
chapter will be created only after the programme is
decrypted.
DMR-BST&BCT765&760EG_eng.book 45 ページ 2017年3月2日 木曜日 午後6時35分
Video list screen
Playing Keyword Recording
programmes
Select “Keyword Record” tab.
Video Menu
Video Menu
HDD
Keyword Record
Time Remaining 45:54 (DR)
All
Not Viewed
Movie
Social/Economic
Folder 01
AVCHD
Folder 02
Programme will be deleted if not enough space on HDD. Press OPTION to change.
1: World Cup
2: Soccer
3: Premier League
4: Olympic
Rec Mode (DR HX)
5: --- (No Keyword)
6: --- (No Keyword)
0
0
Recording mode (picture quality) to
change (> 31)
2
3
\ Video \
HDD
Parent Folder
Select the Keyword, then Press [OK].
Select the programme, then press [OK].
video01.mpeg
00.00.0000 00:00
video02.mpeg
00.00.0000 00:00
video03.mpeg
00.00.0000 00:00
00.00.0000 00:00
video04.mpeg
Play
RETURN
Play
Delete
Page 0001/0003
Page Up
Page Down
Select
Screen icons
Folder
To protect Keyword Recording programmes
Video files
1 Select the programme, then press the green
button in step 3. (> above)
2 Select “Set up Protection”, then press [OK].
Video files (4K)
Move to the parent folder
To delete Keyword Recording programmes
You can delete keywords and all programmes
found with the keywords.
1 Press the red button in step 2. (> above)
2 Select “Delete”, then press [OK].
To remove Keyword Recording programmes
from “Keyword Record”
Keyword Recording programmes removed from
“Keyword Record” will be treated as normal
programmes.
1 Select the programme, then press [OPTION]
in step 3. (> above)
2 Select “Remove from Keyword Record”, then
press [OK].
3 Select “Remove”, then press [OK].
• When video playback has ended, the next video will be
played back continuously if there is another video in the
same folder.
• When the following conditions are met, videos are played
back in 4K regardless of the image quality:
- When this unit is connected to a TV that is 4K and
24p/25p compatible
- When “Video Format” is set to “Automatic” (> 91)
- When “24p / 25p Conversion” is set to “Auto” (> 53)
This unit can not output 4K image when playing back in 3D.
To copy Keyword Recording programmes
If you select keywords before copying, you can
copy all the programmes containing the
keywords.
• For information on copy operations, refer to
“Copying programmes”. (> 59)
TQBS0024
45
Playing back video
1
e.g.,
DMR-BST&BCT765&760EG_eng.book 46 ページ 2017年3月2日 木曜日 午後6時35分
Playing contents on
the media
§
Menu screen
Selecting screen for each operation is displayed
when the media is inserted, and you can access
the operation screen easily.
e.g., [USB]
USB Device
Play / Copy Video
§
1
Insert the media.
Playing back video
When the Video Menu screen or menu
screen etc., appears:
Select the item or content, then press
[OK].
• Repeat this step if necessary.
To play back the playlist created on other
equipment
1
2
3
4
Play / Copy Music
Copy Video ( AVCHD )
• AVCHD: If the menu screen is not
displayed
Press [1 a1.3].
2
View Photos
“For data files (> 23)” only
Press [FUNCTION MENU].
Select “Disc” in “Media”, then press [OK].
Select “Playlists”, then press [OK].
Select the playlist, then press [OK].
Copy New Photos
USB device is inserted.
OK
RETURN
• Display items differ depending on what is
recorded in each media.
If the menu screen is not displayed, display it
by performing the following operation.
1 While stopped
Press [FUNCTION MENU].
2 Select “Media”, then press [OK].
3 Select the media, then press [OK].
Video list screen
e.g., [USB]
Video Menu
\ Video \
USB
Parent Folder
Folder 01
Folder 02
• [BD-V] You cannot play back while recording from external
equipment. Also, playback stops when the timer recording
starts from external equipment.
• When the following conditions are met, videos are played
back in 4K regardless of the image quality:
- When this unit is connected to a TV that is 4K and
24p/25p compatible
- When “Video Format” is set to “Automatic” (> 91)
- When “24p / 25p Conversion” is set to “Auto” (> 53)
This unit can not output 4K image when playing back in 3D.
• To enjoy BD-Video that supports Dolby AtmosR or DTS:XTM
(> 91)
46
TQBS0024
video01.mpeg
00.00.0000 00:00
video02.mpeg
00.00.0000 00:00
video03.mpeg
00.00.0000 00:00
00.00.0000 00:00
video04.mpeg
Play
RETURN
Play
Page 0001/0003
Select
About screen icons (> 45)
Page Up
Page Down
Copy
DMR-BST&BCT765&760EG_eng.book 47 ページ 2017年3月2日 木曜日 午後6時35分
Video Menu screen
Delete BD-Video data
e.g., [BD-RE]
If you no longer need BD-Live data recorded on
the built-in HDD, you can delete data with the
following operation.
1 Press [FUNCTION MENU].
2 Select “BD-Video Data Management” in
“Setup”, then press [OK].
3 Select “Delete BD-Video data”, then press
[OK].
4 Select “Yes”, then press [OK].
5 Select “Start”, then press [OK].
6 Press [OK].
Video Menu
BD-RE
All
All Programmes
Time Remaining 10:30 (DR)
Channel
Date
Programme Name
Dogs and Cats
29.10 22:46
Duration 0:10(HM)
04.10
04.10
29.10
Birds
World news
Football
Delete
Page Up
Page 003/003
Play
RETURN
Page Down
Select
Copy
Showing Information
Select the programme, then press [STATUS
].
Playback from Chapter View (> 44)
Notes for BD-Live discs
• You can restrict Internet access when BD-Live functions are
used (> 88, BD-Live).
• When “Pure Sound mode” is set to “On”, this unit cannot
use BD-Live functions. (> 88)
Playing back video
[BD-V]
BD-Live allows you to enjoy more functions such
as subtitles, exclusive images and online games.
Preparation
1 Perform network connection and settings.
(> 15, 18)
2 Insert a disc.
For the playback method, refer to the
instructions for the disc.
TQBS0024
47
DMR-BST&BCT765&760EG_eng.book 48 ページ 2017年3月2日 木曜日 午後6時35分
Operation during play
Search
Press [6] or [5].
• Press [1 a1.3] to restart play.
• Discs continue to rotate while menus are displayed. Press
[∫] when you have finished playback to protect the unit’s
motor, your TV screen, etc.
• The speed increases up to 5 steps.
([+R] [+RW]: Up to 3 steps)
• MKV, MP4 and MPEG2: Audio is not heard during all
levels search.
Pause
General operations
Press [;].
• Press [1 a1.3] to restart play.
Status messages
Press [STATUS
] twice.
Slow-motion
e.g.,
While paused, press [6] or [5].
• Press [1 a1.3] to restart play.
8:05:50 06.01.2017
Remain HDD
0:05.14 DR
Playing back video
0:30.00
Stop
Press [∫].
Resume play function
Press [1 a1.3] to restart from the stopped
position.
• Discs: Only previous stopped position is memorised. The
position may be cleared if the tray is opened or the unit is
switched to standby mode.
Quick View
Press and hold [1 a1.3].
• Press again to return to normal speed.
• MKV, MP4 and MPEG2: Quick View is not effective.
• Quick View is not effective when playing back the DVD-RW
disc.
• Quick View may not work when recording in XP or FR
mode.
• Quick View cannot be used on encrypted programmes
(
48
).
TQBS0024
•
•
•
•
The speed increases up to 5 steps.
MKV, MP4 and MPEG2: Slow-motion is not effective.
[BD-V], AVCHD ([DVD-R]): Forward direction [5] only.
Slow-motion cannot be used on encrypted programmes
(
).
Frame-by-frame
While paused, press [2] (2;) or [1] (;1).
• Each press shows the next frame.
• Press and hold to change in succession forward
or backward.
• Press [1 a1.3] to restart play.
• MKV, MP4 and MPEG2: Frame-by-frame is not effective.
• [BD-V], AVCHD ([DVD-R]): Forward direction [1] (;1) only.
• Frame-by-frame cannot be used on encrypted programmes
(
).
DMR-BST&BCT765&760EG_eng.book 49 ページ 2017年3月2日 木曜日 午後6時35分
Manual Skip
Switching subtitles
Skip forward 1 minute:
Press [+60s].
[HDD] [USB_HDD] (For recorded
programmes, > 23) [BD-RE] [BD-R]
Skip backward 10 seconds:
Press [-10s].
1 Press [STTL
].
2 Press [OK].
3 Select “On” or “Off”, then press [OK].
• If you want to switch the subtitle language,
select it in the Basic Operation menu (> 52).
• Depending on the content that you play back, this function
is not available.
[BD-V] [DVD-V], MKV:
Display with “Subtitle Settings” or “Subtitles” in the
Basic Operation menu (> 52).
To display menu
[BD-V] [DVD-V]
1 Press [OPTION].
2 Select “Playback Menu”, then press [OK].
3 Select “Top Menu”, “Pop-up Menu” or “Menu”,
then press [OK].
• MKV: If the subtitles text are not displayed correctly, try
changing the language settings (> 88, Subtitle Text).
Displaying the Teletext
Skipping the content or chapter
Press [:] or [9].
Press [TEXT
• [HDD] [USB_HDD] (For recorded programmes, > 23): It will
not skip the programme. But the programme in the grouped
programmes will be skipped. (> 44)
• [9] is not effective for encrypted programmes (
).
].
• Teletext display mode is TOP (FLOF) only.
• Some functions may not work.
• Teletext cannot be displayed when the subtitles are set to
ON.
Changing audio
Press [AUDIO].
• It will switch depending on the contents
recorded every time it is pressed.
TQBS0024
49
Playing back video
[HDD] [USB_HDD] (For recorded
programmes, > 23) [BD-RE] [BD-R]
DMR-BST&BCT765&760EG_eng.book 50 ページ 2017年3月2日 木曜日 午後6時35分
3D video playback
3D settings during playback
Preparation
Connect 3D compatible TV to this unit. (> 11, 12)
• Perform the necessary preparations for the TV.
Change this setting when the screen is not
correctly displayed for 3D compatible
programmes.
Play back following the instructions displayed
on the screen.
1 Press [OPTION].
2 Select “Playback Settings” in “Playback
Menu”, then press [OK].
3 Select “3D Settings”, then press [OK].
4 Select the item below, then press [OK].
Preparatory 3D settings
3D BD-Video Playback
It is also possible to play back 3D discs in 2D
(conventional video). (> 88)
3D AVCHD Output
If 2D AVCHD video is recognised as 3D video and
cannot be played back correctly, you may be able
to play it by changing the setting. (> 91)
Playing back video
3D Playback Message
Hide the 3D viewing warning screen. (> 91)
Signal Format
- Original:
Keep original picture format.
- Side by side:
3D picture format comprising of left and right
screens.
Graphic Display Level
Adjust the 3D position for the playback menu or
message screen etc.
• Please refrain from viewing 3D images if you do not feel
well or are experiencing visual fatigue.
In the event that you experience dizziness, nausea, or other
discomfort while viewing 3D images, discontinue use and
rest your eyes.
• Depending on the connected TV, the video being played
back might switch to 2D video due to changes in resolution
etc. Check the 3D setting on the TV.
• 3D video might not output the way it is set in “Video Format”
(> 91) and “24p Output” (> 92).
• It may display as Side-by-Side (2 screen structure) when
playback of the 3D video is started. Select “Side by side” in
“Signal Format”. (> above)
• This unit only guarantees the playback of the Frame
Sequential and the Side-by-Side (Half) programme types.
50
TQBS0024
DMR-BST&BCT765&760EG_eng.book 51 ページ 2017年3月2日 木曜日 午後6時35分
You can save 4K videos/photos recorded with
digital cameras and other 4K-compatible devices
to the HDD of this unit and play them back.
Compatible 4K content
• MP4/MOV (4K/24p, 25p and 30p)
- bit rate up to 100 Mbps
- resolution up to 3840k2160 25p/30p,
4096k2160 24p
• JPEG, MPO
- resolution 3840k2160
Photos with a resolution greater than
3840k2160 are played back in 3840k2160.
Preparation
• Connect a 4K-compatible TV to this unit. (> 11)
Playing back 4K content
∫ 4K videos
[HDD]
Refer to “Playing programmes on the HDD”.
(> 42)
[USB]
Refer to “Playing contents on the media”. (> 46)
∫ Photos
Refer to “Playing photos”. (> 67)
• Video may not be played back smoothly depending on the
USB device.
• You can also watch the 4K contents stored in the DLNA
Certified media server. (> 74, Home Networking (DLNA))
Copying 4K content
∫ 4K videos
[USB]
>
[HDD]
Refer to “Copying video files”. (> 66)
∫ Photos
Refer to “Selecting and copying the photos”. (> 69)
TQBS0024
51
Playing back video
4K Networking
DMR-BST&BCT765&760EG_eng.book 52 ページ 2017年3月2日 木曜日 午後6時35分
Playback menu
A variety of playback operations and settings can
be performed from this menu.
Available options differ depending on the playing
contents and the condition of the unit.
1
Display the Playback menu.
1 Press [OPTION].
2 Select “Playback Settings” in “Playback
Menu” or select “Playback Settings”, then
press [OK].
e.g.,
Playing back video
Basic Operation
Multi Audio
Audio1 (Dolby D)
Audio Channel
LR
Subtitles
On
Subtitle Language
eng (MPEG)
Repeat Play
Off
Menu
2
3
4
Item
Setting
Select the menu, then press [OK].
Select the item, then press [OK].
Change the setting.
To clear the Playback menu
Press [RETURN
disappears.
] until the Playback menu
Basic Operation
Soundtrack§
Show or change the soundtrack.
Multi Audio
Switch in the case of multiple audio.
Audio Channel
Change audio (LR/L/R) during playback.
Subtitles§
Subtitle Settings§
Turn the subtitle on/off, and change the
language depending on the media.
Subtitles
Subtitle Style
Subtitle Position
Subtitle Luminance
Subtitle Language
Select the subtitle language in the case of
multiple languages.
Angle§
Change the number to select an angle.
Repeat Play
Select the item which you want to repeat.
Shuffle
Select whether to play shuffle or not.
Video
The original video recording method
(MPEG-4 AVC etc.) appears.
Primary Video
The original video recording method appears.
Secondary Video
Video
Select on/off of images.
The original video recording method
appears.
Soundtrack
Select on/off of audio and the language.
Reception
The radio wave status during the playback of
Home Networking (DLNA) is displayed. (Only
when a wireless connection is used)
§
52
TQBS0024
With some discs, you may only be able to
make changes using the menus on the disc.
DMR-BST&BCT765&760EG_eng.book 53 ページ 2017年3月2日 木曜日 午後6時35分
Sound Effect Settings
DSD Decode Sampling Frequency
Select the settings that suit your sound quality
preferences.
Picture Type
Select the picture quality mode during play.
Sharpness Adjustment
DSD LPF Setting
Select the settings that suit your sound quality
preferences.
Noise Reduction
Luminance/Colour Adjustment
Bandwidth Limitation
Adjusts the bandwidth limitations.
24p / 25p Conversion
Plays back videos with film-like motion.
• This function is available on the following
conditions:
- “Video Format” set to “Automatic”, “1080i”§
or “1080p”§ (> 91)
§
Only for 24p Conversion
Sound Settings
Sound Effects
• This function is effective when “Digital Audio
Output” is set to “PCM”. (> 90)
Night Surround
Enjoy a movie with powerful sound even
when the volume is kept low at night.
Remaster 1/Remaster 2
Sound becomes more natural by adding
higher frequency signals not recorded on
the track.
- Connect 24p/25p compatible TV.
• Noise may appear on the image when you
switch the setting.
Progressive
Select the method of conversion for
progressive output to suit the type of content
being played.
• Auto
Automatically detects the film and video
content, and appropriately converts it.
• Video
Select this setting when the content is
distorted if “Auto” is selected.
• Film
Select this if the edges of the film content
appear jagged or rough when “Auto” is
selected. However, if the video content is
distorted, then select “Auto”.
Reset to Default Picture Settings
Restores the default settings of the Picture
Settings menu.
Dialogue Enhancer
The volume of the centre channel is raised to
make dialogue easier to hear.
Sound Effects
3D Settings (> 50)
Signal Format
Graphic Display Level
• The menu is not displayed when playing photos.
Display language list
ENG
English JPN
Japanese ARA
FRA
French CHI
Chinese HIN
DEU
German KOR
ITA
ESP
NLD
Italian MAL
Spanish VIE
Dutch THA
Arabic
Hindi
Korean PER
Malay IND
Persian
Indonesian
Vietnamese MRI
Maori
Thai BUL
Bulgarian
Romanian
SVE
Swedish POL
Polish RUM
NOR
Norwegian CES
Czech GRE
Greek
DAN
Danish SLK
Slovak TUR
Turkish
POR
Portuguese HUN
RUS
Russian FIN
Hungarian ¢
Others
Finnish
TQBS0024
53
Playing back video
Picture Settings
DMR-BST&BCT765&760EG_eng.book 54 ページ 2017年3月2日 木曜日 午後6時35分
Editing video
Deleting/Editing
programmes
Once deleted, divided or partially deleted,
content cannot be restored to its original
state. Make certain before proceeding.
§
“For recorded programmes (> 23)” only
§
• If the disc is protected, release the protection. (> 81, Disc
Protection)
[BCT765] [BCT760]
• PIN is required to edit the programmes with
in some
functions. (> 43)
On the Video Menu screen:
Select the programme.
Video Menu
HDD
Keyword Record
2
3
Grouped Programmes
Time Remaining 45:54 (DR)
All
Not Viewed
Channel
Date
Movie
Editing recorded programmes
• If the programme is contents protected, you may
not perform editing other than deleting. (> 10)
1
Deleting recorded programmes
1
• Available disc space after deleting:
- [HDD] [USB_HDD] [BD-RE] [RAM]
The space deleted becomes available for recording.
- [BD-R] [DVD-R] [+R]
Available space does not increase even after the contents
are deleted.
- [DVD-RW] [+RW]
Available recording space increases only when the last
recorded programme is deleted.
Social/Economic
On the Video Menu screen:
Select the programme.
• Multiple selection (> left)
Press [OPTION].
Select the item, then press [OK].
e.g.,
AVCHD
Programme Name
Playback
29.10 9:00
Movie
Duration
0:01(DR)
Delete Programme
Editing video
Information
Page
Play
RETURN
Select
Delete
2
3
Page Up
Page Down
Copy
Press the red button.
Select “Delete”, then press [OK].
Multiple selection
Select the programme, then press the yellow
button.
A check mark
is displayed. Repeat this step.
• Press the yellow button again to cancel.
54
TQBS0024
Enter Programme Name
Set up Protection
Cancel Protection
Partial Delete
Edit
Divide Programme
Chapter View
Picture Quality Change
Create Group
Programme Decryption
Release Grouping
All Programmes
Entering programme name
1 Select “Enter Programme Name” in “Edit”,
then press [OK].
2 Refer to “Entering text”. (> 83)
DMR-BST&BCT765&760EG_eng.book 55 ページ 2017年3月2日 木曜日 午後6時35分
Setting protection
Dividing programme
[HDD] [USB_HDD] [BD-RE] [BD-R] [RAM] [+R] [+RW]
Protection setting prevents the programme from
accidental deletion.
[HDD] [USB_HDD] [BD-RE] [BD-R] [RAM]
1 Select “Set up Protection” or “Cancel
Protection” in “Edit”, then press [OK].
2 Select “Yes”, then press [OK].
appears when setting the protection.
1 Select “Divide Programme” in “Edit”, then
press [OK].
2 Press [OK] at the point to divide the
programme.
• You can find the desired point by using play,
search, etc. (> 48)
3 Select “Continue”, then press [OK].
4 Select “Divide”, then press [OK].
• This function cannot be used on encrypted programmes
).
Partial deleting
[HDD] [USB_HDD] [BD-RE] [BD-R] [RAM]
1 Select “Partial Delete” in “Edit”, then press
[OK].
2 Press [OK] at the start point and end point to
delete.
• You can find the desired point by using play,
search, etc. (> 48)
3 Select “Continue”, then press [OK].
• Select “Next”, then press [OK] to delete other
sections. Up to 20 sections can be set.
(> go to step 2)
4 Select “Delete”, then press [OK].
5 Press [RETURN
To confirm the division point
After performing step 2.
Select “Preview”, then press [OK].
• The unit plays 10 seconds before and after the
division point.
To change the division point
After performing step 2.
Restart play and select “Divide”, then press [OK]
at the division point.
• [HDD] [USB_HDD] Divided programmes will become a group
of programmes.
• This function cannot be used on encrypted programmes
(
).
Editing video
(
].
• This function cannot be used on encrypted programmes
(
).
• Chapter Mark is generated in the scene that was partially
deleted.
TQBS0024
55
DMR-BST&BCT765&760EG_eng.book 56 ページ 2017年3月2日 木曜日 午後6時35分
Picture Quality Change
[HDD] [USB_HDD]
The Picture Quality Change function changes the
recording mode of programmes in DR mode or
AVCHD format. Programmes will be smaller in
size after their recording mode is changed. It
takes about the same amount of time as
recording to change the mode.
1 On the Video Menu screen (> 54):
Select the programme in DR mode or the
AVCHD content.
• Multiple selection (> 54)
2 Press [OPTION].
3 Select “Picture Quality Change” in “Edit”, then
press [OK].
e.g.,
Picture Quality Change
Change picture quality of the selected programme.
Please select picture quality and other options, then press OK.
Picture Quality
HL -- Longer Play
Subtitles
Timing
Off
During standby
5 Select the item below, then press [OK].
Delete:
The original programme will be deleted to save
the storage capacity of the HDD after the
picture quality is changed.
Keep:
The original programme is retained even after
the picture quality is changed.
• The original programme will be deleted after
Picture Quality Change, if the selected
programme is indicated with
. (> 10)
6 If you have selected “Now”:
Select “Start”, then press [OK].
If you have selected “During standby”:
Press [OK].
• Picture quality change will be performed after
the unit is switched to standby mode.
“COPY” or “CONV” on the front panel display
stay lit while a picture quality change is in
progress.
• The picture quality of encrypted
OK
Editing video
RETURN
4 Set the picture quality change options, then
press [OK].
Picture Quality (> 23):
• [USB_HDD] You cannot select XP, SP and LP
mode.
Subtitles:
• Automatic
Subtitles will be recorded if they are included
in the programme.
• Off
Subtitle will not be recorded.
Timing:
• Now
A picture quality change starts immediately
after step 6.
• Time recordings cannot be made while a
picture quality change is in progress.
• If an encrypted programme (
) is
included, “Now” cannot be selected.
• During standby
A picture quality change starts after the unit
is switched to standby mode.
56
TQBS0024
programmes (
) will be changed after
they are decrypted.
To cancel a picture quality change if you
selected “Now”
Press and hold [RETURN
3 seconds.
] for more than
To cancel a picture quality change if you
selected “During standby”
After performing steps 1–2 (> 54, Editing
recorded programmes)
1 Select “Picture Quality Change” in “Edit”, then
press [OK].
2 Select “Yes”, then press [OK].
DMR-BST&BCT765&760EG_eng.book 57 ページ 2017年3月2日 木曜日 午後6時35分
Encrypted programmes (
manually.
e.g.,
Channel
Date
04.10
04.10
29.10
Prigramme Name
29.10 9:00
Movie
Duration
Programme Decryption
[HDD]
0:01(DR HL)
When “±± > ±±” (Picture quality change
display) is displayed, the process has not finished
yet.
• To use “Picture Quality Change”, the HDD needs enough
storage capacity.
• Teletext will not be recorded.
• If “During standby” is set for the Picture Quality Change
function, the change being applied stops when this unit is
turned on. The process will start from the beginning again
once the unit is switched to standby mode.
• When the picture quality is changed, 3D information may be
lost.
• When the picture quality of a programme is changed, its
new audio and subtitle language settings will be determined
by the following settings:
- “Multi Audio” and “Subtitles” in “Preferred Language”
(> 86, 87)
) can be decrypted
1 Select “Programme Decryption” in “Edit”, then
press [OK].
2 Select whether to delete the original
programme or not, then press [OK].
• Yes
The original programme will be deleted to
save HDD capacity after decryption.
• No
The original programme remains after
decryption.
3 Select “Start”, then press [OK].
Decryption starts.
“Decrypting” appears during decryption.
• When a programme that is copy protected
(One generation copy is permitted) is
selected, the original programme will be
deleted after decryption. (> 10)
To cancel the decryption
Press and hold [RETURN ] for more than
3 seconds.
• For decryption, the CI module that supports the programme
is necessary.
• During decryption, do not remove the CI module from this
unit.(> 9)
• Depending on the programme, playback/decryption may
not be possible.
TQBS0024
57
Editing video
To check to see if a picture quality change is
finished
Press [VIDEO MENU].
DMR-BST&BCT765&760EG_eng.book 58 ページ 2017年3月2日 木曜日 午後6時35分
Deleting video files on the HDD
Editing chapters
[HDD] [USB_HDD] [BD-RE] [BD-R] [RAM]
1
1 Select “Chapter View”, then press [OK].
2 Perform the editing operations.
e.g.,
Edit Chapter Mark:
Select the point where you want to start a new
chapter while viewing the programme.
1 Press the green button.
2 Press [OK] at the point you want to divide.
• Repeat this step.
3 Press [RETURN
screen.
Editing video
To combine chapters (Delete chapter
mark):
1 Select the chapter, then press [OPTION].
2 Select “Combine Chapters”, then press
[OK].
3 Select “Combine”, then press [OK].
The selected chapter is combined to the
next chapter.
Playback from Chapter View
Refer to “Playback from Chapter View”. (> 44)
• The maximum number of chapters:
(Depends on the state of recording.)
[HDD] [USB_HDD]: Approx. 1000 per programme
[BD-RE] [BD-R] [RAM]: Approx. 1000 per disc
• [HDD] [USB_HDD] When the programme has the maximum
number of chapters, you cannot perform the Resume play
function (> 48) with the programme.
• This function cannot be used on encrypted programmes
(
58
).
TQBS0024
Video Menu
\ Video \
HDD
Parent Folder
Folder 01
Folder 02
video01.mpeg
00.00.0000 00:00
video02.mpeg
00.00.0000 00:00
video03.mpeg
00.00.0000 00:00
00.00.0000 00:00
video04.mpeg
Play
RETURN
] to go to Chapter View
To delete the chapter:
1 Select the chapter, then press the red
button.
• Multiple selection (> 54)
2 Select “Delete”, then press [OK].
On the video list screen:
Select the file or folder.
Delete
2
3
Page 0001/0003
Play
• Multiple selection (> 54)
Press the red button.
Select “Yes”, then press [OK].
• All files in the folder will be deleted.
Page Up
Page Down
Select
DMR-BST&BCT765&760EG_eng.book 59 ページ 2017年3月2日 木曜日 午後6時35分
Copying programmes
• Encrypted programmes (
§1, 2, 3
§1, 3
§1
§2
§3
“For recorded programmes (> 23)” only
The programme in the source media will be
deleted.
The recording mode (picture quality) cannot
be changed.
1
Insert or connect the media.
2
Press [FUNCTION MENU].
3
4
) cannot be copied. (> 32)
• Simultaneous operation is not possible while copying with
finalising or creating Top Menu.
• You cannot copy the following programmes.
- [USB_HDD] Protected programmes
- [USB_HDD] HD Video (AVCHD)
• If you wish to choose the audio language, select the
language from “Multi Audio” of “Preferred Language” before
copying (> 86, 87).
To register the external HDD (USB HDD)
(> 41)
To copy HD Video (AVCHD) to the DVD-R in
High Definition (> 66)
To copy video files (> 66)
To release the disc protection (> 81)
Select “Recorded Programmes” or
“Video ( AVCHD )” in “Contents on
HDD”, then press [OK].
Select the programme.
• Multiple selection
Select the programme, then press the
yellow button.
A check mark
is displayed. Repeat this
step.
• Press the yellow button again to cancel.
5
6
7
8
Copying video
Copying video
Press the blue button.
The copy direction selection screen is
displayed.
Select the copying direction, then press
[OK].
Select “Yes”, then press [OK].
• If you select “No”, you can change the
selection. (> 60, To change the selection)
Set other settings, then press [OK].
(> 60, Setting the copying options)
Select “Yes”, then press [OK].
TQBS0024
59
DMR-BST&BCT765&760EG_eng.book 60 ページ 2017年3月2日 木曜日 午後6時35分
To change the selection
Setting the copying options
1 Select “No”, then press [OK] in step 6 (> 59).
1 Select the item in step 7 (> 59).
e.g.,
e.g., [HDD] > [BD-RE]
The order of copying
Automatic Standby after Copy
Off
Remaining space
Copy
HDD
Keyword Record
Grouped Programmes
BD-RE Remain
90%
All
Channel
Not Viewed
Date
Movie
Social/Economic
AVCHD
Programme Name
1
Standby status can be changed if required.
Please press OK to start copying.
OK
29.10 9:00
Movie
2
Duration
0:01(DR)
RETURN
2 Press [2, 1] to change the settings.
Page Up
Page
Copy
RETURN
Page Down
Select
Copy
2 To change the selected programmes:
Select the programme, then press the yellow
button.
Repeat this step to select programmes.
Copying video
To change the picture quality:
[HDD] > [BD-RE] [BD-R] [RAM] [DVD-R] [DVD-RW]
[+R] [+RW]
1 Select the programme, then press
[OPTION].
2 Select “Picture Quality Change”, then press
[OK].
3 Select the picture quality, then press [OK].
Repeat steps if necessary.
3 Press the blue button.
4 Go to step 6. (> 59)
About screen icons on the Video Menu
Refer to “Screen icons”. (> 63)
• Automatic Standby after Copy
On:
This unit is turned to standby mode when it is
not operated for approximately 5 minutes
after completing copy.
• Subtitles
Automatic:
Subtitles will be recorded if they are included
in the programme.
• If you wish to choose the subtitle, select the language
from “Subtitles” of “Preferred Language” before
copying (> 86, 87).
• Finalise
On:
[DVD-R] [DVD-RW] [+R] The discs become
play-only and you can also play them on
other DVD equipment.
• Create Top Menu
On:
[+RW] You can play the disc on other DVD
equipment.
• You can perform “Finalise” or “Create Top Menu” later.
(> 82, 83)
60
TQBS0024
DMR-BST&BCT765&760EG_eng.book 61 ページ 2017年3月2日 木曜日 午後6時35分
[BD-RE] [BD-R] [RAM] [+RW] > [HDD]
1
2
3
4
Insert a disc.
The menu screen appears. (> 46)
Select “Play Video”, then press [OK].
Select the programme.
• Multiple selection (> 59)
Press the blue button.
Copying programmes with copying list
[HDD]
,. [USB_HDD]
[HDD]
>
[USB_HDD]
> [BD-RE] [BD-R]
[BD-RE] [BD-R]
[RAM] [+RW]
> [HDD]
1
Copy
Cancel All
Direction
1 CopyDisc
HDD
2
Picture Quality
3
Create List
Keep
Press OK to start copying.
2
Start Copying
OK
2
RETURN
• To change the detailed settings for copy,
refer to “Copying programmes with copying
list”. (> right)
5
6
Select “Start Copying”, then press [OK].
[BD-RE] [BD-R] [RAM] [DVD-R]
[DVD-RW] [+R] [+RW]
[HDD] ,. [USB_HDD]:
1 Press [FUNCTION MENU].
2 Select “Copy Menu” in “Copy Video”, then
press [OK].
Except “[HDD] ,. [USB_HDD]”:
1 Insert a disc.
The menu screen appears. (> 46)
2 Select “Copy”, then press [OK].
Set the copy direction.
1 Select “Copy Direction”, then press
[1] (right).
2 Set “Source” and “Destination”.
3 Press [2].
Copy
Select “Yes”, then press [OK].
Cancel All
Source
HDD
Destination
Disc
Direction
1 Copy
HDD
Disc
2
Picture Quality
3
Create List
Keep
0
Copying video
Copying from media other than HDD
with Video Menu
Information of the copy destination
- BD-RE
- Copy restricted programmes can be
copied on to disc
Start Copying
Select the copy direction.
RETURN
3
Set the picture quality (> 23).
1 Select “Picture Quality”, then press
[1] (right).
2 Set “Picture Quality”.
3 Press [2].
TQBS0024
61
DMR-BST&BCT765&760EG_eng.book 62 ページ 2017年3月2日 木曜日 午後6時35分
4
Register programmes for copy.
1 Select “Create List”, then press
[1] (right).
2 Select “New item”, then press [OK].
3 Select the programme, then press the
yellow button.
Repeat this step to select programmes.
5
e.g.,
Copy
Cancel All
Direction
1 Copy
HDD
Disc
e.g., [HDD]
Create List
2
Grouped Programmes
HDD
Date
Time 9:00
Duration
0:30 (DR)
Size
1360 MB
OK
01.01
01.01
02.01
03.01
03.01
04.01
05.01
05.01
06.01
06.01
Channel
Time
9:00
15:00
9:30
10:00
18:30
2:00
11:00
15:00
3:45
9:00
Page 001/003
1
1
1
1
1
1
1
1
1
1
Copying video
4 Press [OK].
5 Press [2].
Data size of each registered programme
62
TQBS0024
3
Create List
4
Other Settings
1
Start Copying
Data size recorded to
the copy destination
Press OK to change the setting.
• This screen does not appear depending
on the copying mode. (> go to step 6)
Page Up
• The programmes will be copied in the order of the
copying list. If you want to specify the order, edit
the copying list after the programmes are
selected. (> 63, Editing the copying list)
Page 01/01
Off
RETURN
2 Select the copying option, then press
[OK].
(> 60, Setting the copying options)
Page Down
• To change the appearance of the list
or show information of the
programme
1 Press [OPTION].
2 Select the item, then press [OK].
Programme
Size
New item (Total=0)
Off
Finalise
HG
OK
Select
Destination Capacity: 3200 MB
Size:
0 MB ( 0% )
Subtitles
Picture Quality
Programme Name
RETURN
No.
Make other settings.
1 Select “Other Settings”, then press
[1] (right).
3 Select the item, then press [OK].
4 Press [2].
6
7
Select “Start Copying”, then press [OK].
Select “Yes”, then press [OK].
To cancel all registered copying settings and
lists
After performing step 1
1 Select “Cancel All”, then press [OK].
2 Select “Yes”, then press [OK].
• Encrypted programmes (
) cannot be copied. (> 32)
• Programmes in the grouped programmes and other
programmes cannot be registered simultaneously.
• [RAM] Radio programme cannot copy.
DMR-BST&BCT765&760EG_eng.book 63 ページ 2017年3月2日 木曜日 午後6時35分
Editing the copying list
Screen icons
1 Select the programme after step 4-4 (> 62).
Programmes that can be copied to
discs using Copy (Change Picture
Quality)§.
Copy
Cancel All
Direction
1 CopyHDD
Disc
2
Picture Quality
3
Create List
Destination Capacity:
Size:
No.
Size
2:00
1:00 ( 50% )
Programmes that can be copied to
the HDD using Copy (Change
Picture Quality)§.
Programme
01 0:30 DR (25%)
02 0:30 DR (25%)
HG
New item (Total=2)
2
Programmes that cannot be copied
to disc
4 Other Settings
Start Copying
OK
Page 01/01
Programmes that cannot be copied
to HDD
Create copy list.
RETURN
2 Press [OPTION].
3 Select the item below, then press [OK].
Delete All:
All programmes that you registered to copy
are deleted.
Add:
Add new items to the copying list.
1 Select the programmes with the yellow
button.
2 Press [OK].
(NTSC)
(PAL)
§
Programme recorded using a
different encoding system from that
of the unit.
• Programmes displaying these
marks cannot be selected.
The amount of time needed for a picture
quality change is the same as the length of the
programme to be copied.
About other screen icons (> 43)
Copying video
Delete:
Selected programmes are deleted.
• Select the programme, then press the yellow
button before step 2.
Repeat this step to select programmes.
Move:
Change the order of items on the copying list.
• Select the programme to move before
step 2.
Select the destination, then press [OK].
TQBS0024
63
DMR-BST&BCT765&760EG_eng.book 64 ページ 2017年3月2日 木曜日 午後6時35分
Notes for copying
Copy (Change Picture Quality)
Copy (Keep Picture Quality)
The unit copies a programme while maintaining
its original picture quality and recording time. This
method can perform copying faster than Copy
(Change Picture Quality) can.
• Copy (Keep Picture Quality) is available for the
picture quality and media combinations below.
Original
programme’s
picture quality
Media
• Copying will continue up to the point cancelled.
- [DVD-R] [DVD-RW] [+R] [+RW] If copy is cancelled
during the step while temporarily copying to
the HDD, then nothing will be copied.
- [BD-R] [DVD-R] [DVD-RW] [+R] [+RW] Even if the
programme was not copied to the disc, the
amount of remaining writable disc space
becomes less.
XP
SP
LP
FR
• When copying programme recorded in
1080/50p or 1080/60p, it cannot copy in
progressive.
§
Copying video
DVD-RAM only
• Copy (Keep Picture Quality) can be used only
when there is enough recording capacity on the
destination media.
• Copy (Keep Picture Quality) is not available in the following
cases:
- [HDD] > [BD-RE] [BD-R] :
• Copying original radio programmes
- [HDD] > [DVD-R] [DVD-RW] [+R] [+RW] :
• Programmes that contain many deleted segments
- [HDD] > [+R] [+RW] :
• Programmes recorded in “FR” mode (with a recording
time of 5 hours or longer) or “EP” mode§
• Programmes recorded in 16:9 aspect
- [HDD] > [DVD-R] [DVD-RW] :
• Programmes recorded through the AV input in the 16:9
aspect ratio in “FR” mode (with a recording time of
5 hours or longer) or “EP” mode§
64
• [DVD-R] [DVD-RW] [+R] [+RW] You cannot copy to
the disc in the following cases.
- When there is not enough free space on the
HDD.
- When the number of programmes recorded on
the disc will exceed its maximum limit if
copying is performed. (> 22)
DR
HG
HX
HE
HL
HM
§
§
The unit changes the picture quality of a
programme while copying it. Copying will take
about the same amount of time as the actual
recording time.
Programmes recorded with another device in “EP” mode
and imported from an external media to the HDD of this
unit
TQBS0024
Copying 3D programmes
• It may not display correctly in 3D when a copied
3D programme is played back. In such a case,
change the “Signal Format” during the playback
of the programme. (> 50)
• 3D information may not be copied.
• If you want to copy 3D AVCHD video to the disc
in 3D, use BD-R or BD-RE and must use Copy
(Keep Picture Quality).
About maintaining the chapter mark
• The position of the chapter might shift slightly.
• Maximum number of chapters on the disc is
limited.
- [BD-RE] [BD-R] [RAM] [DVD-R] [DVD-RW] :
Approx. 1000
- [+R] [+RW] : Approx. 254
(Depends on the state of recording.)
DMR-BST&BCT765&760EG_eng.book 65 ページ 2017年3月2日 木曜日 午後6時35分
Copying Programme Playing
[DVD-V] > [HDD]
While playing a disc, the content being played is
copied to the HDD according to the set time.
1
2
3
4
5
6
[HDD] > [BD-RE] [BD-R] [RAM] [DVD-R] [DVD-RW] [+R]
[+RW]
1
Press [FUNCTION MENU].
Select “Copy Menu” in “Copy Video”, then
press [OK].
Set “Picture Quality”.
1 Select “Picture Quality”, then press
[1] (right).
2 Press [OK], then select the picture quality
(XP/SP/LP).
3 Press [2].
Set “Copy Time”.
1 Select “Copy Time”, then press
[1] (right).
2 Select “Time Setting”, then press [OK].
3 Select “On” or “Off”.
On:
Set the copying time.
• Set a few minutes longer than the
source title, in order to include the
operation time before play begins.
Off:
Copying all the content on the disc.
2
3
4
Play back the programme to copy.
• Multiple audio, subtitle and Teletext
displayed during playback will be copied.
- Select the multiple audio with “Multi
Audio” in the Basic Operation menu
(> 52)
- Select the subtitles with “Subtitle
Language” in the Basic Operation menu.
(> 52)
Press [OPTION].
Select “Copy Programme Playing”, then
press [OK].
Select “Start”, then press [OK].
Copying will start from the beginning of the
programme regardless of the playing
position.
To stop copying
Press and hold [RETURN
• Encrypted programmes (
] for 3 seconds.
) cannot be copied.
4 Press [2].
• You can record to or play the HDD while Copy (Keep
Picture Quality) is in progress.
Press [OK] to exit the screen display.
Select “Start Copying”, then press [OK].
• Press [STATUS
Select “Yes”, then press [OK].
• When the Top Menu is displayed:
Select the title you want to start copying,
then press [OK].
] to confirm the current progress.
• About picture quality and copying
Copy (Keep Picture Quality) is available if
certain conditions are met. Refer to “Notes for
copying”. (> 64)
01/02
01
Mouse
02
Cattle
03
04
After the last title on the disc has finished
playing the Top Menu is recorded until the
set time is reached.
To stop copying
Press [∫].
• If stopped partway, copying will be up to that
point.
• [BD-RE] [BD-R] When copying the programmes in DR, HG,
HX, HE, HL or HM modes and the copy destination does
not have enough space, one from HG, HX, HE, HL or HM
modes will be selected to match the available space.
• [RAM] [DVD-R] [DVD-RW] [+R] [+RW] When copying a
programme in DR, HG, HX, HE, HL or HM mode, Copy
(Change Picture Quality) will be performed in FR mode.
• When copying a programme in XP, SP, LP or FR mode to
a destination with not enough space, Copy (Change
Picture Quality) will be performed in FR mode.
• Operations and on-screen displays during copy are also
recorded.
TQBS0024
65
Copying video
Copying a finalised disc
DMR-BST&BCT765&760EG_eng.book 66 ページ 2017年3月2日 木曜日 午後6時35分
Copying HD Video (AVCHD) to the
DVD-R in High Definition
You can copy HD Video (AVCHD) recorded on
HDD to a DVD-R in High Definition quality.
[HDD] > [DVD-R]
1
2
3
Copying video files
[USB]
1
Insert an unformatted DVD-R or DVD-R DL.
The menu screen appears. (> 46)
>
[HDD]
On the video list screen:
Select the file or folder.
e.g.,
Video Menu
Select “Copy Video ( AVCHD ) to Disc”, then
press [OK].
\ Video \
USB
Parent Folder
Folder 01
Folder 02
Go to step 4 on page 62, “Copying
programmes with copying list”.
video01.mpeg
00.00.0000 00:00
video02.mpeg
00.00.0000 00:00
00.00.0000 00:00
video03.mpeg
00.00.0000 00:00
video04.mpeg
Copying video
To copy HD Video (AVCHD) from other
equipment
Refer to “Copying the HD Video (AVCHD)”.
(> 78)
• When a disc is named, formatting will be automatically
performed. Therefore, do not name a disc before this
operation. (> 81, Disc Name)
• Discs will be automatically finalised after copy.
• The following HD Videos (AVCHD) cannot be copied to the
disc in high definition.
- Exceeding 18 Mbps
- 1080/50p or 1080/60p
- Without the AVCHD information (video recorded with
certain non-Panasonic equipment, video copied to the
HDD after copying it to BD-R or BD-RE once, etc.)
• 3D video may not be copied correctly.
66
TQBS0024
Play
RETURN
Page 0001/0003
Play
2
3
Page Up
Page Down
Select
Copy
• Multiple selection (> 59)
Press the blue button.
Select “Yes”, then press [OK].
To stop copying
Press and hold [RETURN
] for 3 seconds.
About screen icons
Refer to “Screen icons”. (> 45)
• All files in the folder will be copied.
• The names of folders/files cannot be changed after they are
copied to the HDD. We recommend that you create a folder
with an easily identifiable name on a PC or other device first
and use the folder to perform copying.
• Up to 1000 files can be copied at once.
• While copying, no other operations can be performed.
Timer recordings will not proceed.
DMR-BST&BCT765&760EG_eng.book 67 ページ 2017年3月2日 木曜日 午後6時35分
Photo
Photo play option
§1
§2
1
2
§1
§2
“For data files (> 23)” only (JPEG, MPO)
[RAM] [DVD-R] [+R] only
Playing photos
1
[HDD]:
1 Press [FUNCTION MENU].
2 Select “Photo” in “Contents on HDD”,
then press [OK].
Except [HDD]:
1 Insert or connect the media.
The menu screen appears. (> 46)
2 Select “View Photos”, then press [OK].
2
3
Select the folder, then press [OK].
• Photo menu screen appears. (> 68)
Select the photo, then press [OK].
• Press [2, 1] to display the previous or
next photo.
While displaying a photo:
Press [OPTION].
Select the item below, then press [OK].
Graphic Display Level
You can change the 3D position of the
screen display, etc., during the 3D photo
playback.
Photo Menu
• Start Slideshow
You can start a slideshow.
• Rotate RIGHT/Rotate LEFT
• The information of the rotated photos will
not be stored depending on the media.
• This function is not available during the
3D photo playback.
• Information
Information (shooting date etc.) is shown.
• Wallpaper
A photo being played back is registered as
wallpaper on the FUNCTION MENU
screen. (> 25)
• When the following conditions are met, photos are played
back in 4K regardless of the image quality:
- When this unit is connected to a TV that is 4K and 30p
compatible
- When “Video Format” is set to “Automatic” (> 91)
This unit can not output 4K image when playing back in 3D.
Photo and Music
Photo and Music
TQBS0024
67
DMR-BST&BCT765&760EG_eng.book 68 ページ 2017年3月2日 木曜日 午後6時35分
Photo Menu screen
Slideshow settings
1
e.g., [HDD]
Tab
Photo Menu
On the Photo Menu screen:
Press the green button.
HDD
All
Slideshow
3D
03.01.2012
8
29.10.2012
12
25.02.2013
18
Start Slideshow
15.03.2013
4
OK
RETURN
Calendar
Delete
Slideshow
Page Up
Page Down
Page 0002/0002
Select
Interval
Normal
Transition Effect
Fade
Repeat Play
On
Music Selection
No background music
Background Music
No List
Shuffle BGM
Off
CH
Copy
OK
Photos imported to the HDD (> 69) are managed
using folders.
Folders and photos can be edited by pressing
[OPTION]. (> 69)
To select the tab
Press [2, 1].
To start Slideshow
Refer to “Slideshow settings”. (> right)
[HDD]
To display or exit the Calendar screen
Press [;].
Photo and Music
Screen icons
3D
(Tab)
3D photos (MPO)
• Select from this tab to play back in
3D.
RETURN
2
Select the item below, then press [OK].
Start Slideshow
Interval
Set up the time until the next photo is to
display.
Transition Effect§
Effect for the next photo to display can be
set.
Repeat Play
Music Selection§
Select background music on (either from
HDD or USB) or off.
Background Music§
Select background music from HDD or USB
(Folder).
Photo protected
New photo which is not viewed
Shuffle BGM§
Play back the BGM (Background Music) in
shuffle order.
§
This function is not available during the
3D photo playback.
To pause the Slideshow
Press [;].
• Press [;] again to restart.
To stop the Slideshow
Press [RETURN
68
TQBS0024
].
DMR-BST&BCT765&760EG_eng.book 69 ページ 2017年3月2日 木曜日 午後6時35分
[HDD] [BD-RE] [BD-R] [RAM]
1
On the Photo Menu screen:
To edit the folder:
Select the folder.
To edit the photo:
1 Select the folder, then press [OK].
2 Select the photo to edit.
Selecting and copying the photos
[HDD]
> [BD-RE] [BD-R] [RAM]
[BD-RE] [BD-R] [RAM]
[DVD-R] [+R] [CD]
> [HDD]
[USB_HDD] [USB]
>
1
• To select multiple folders or photos
Press the yellow button when selecting the
folder or photo.
3
• To select multiple folders or photos
Press the yellow button when selecting the
folder or photo.
Press [OPTION].
• Selectable items will change depending on
the media and the type of file.
A check mark
is displayed. Repeat this
step.
• Press the yellow button again to cancel.
Select the item below, then press [OK].
Enter Folder Name
Refer to “Entering text”. (> 83)
2
Combine Folders
[HDD]
Delete Folder
Move Photos
[HDD]
Select “Move to new folder” or “Move to
another folder”, then press [OK].
• If “Move to another folder” is selected, set a
destination folder.
Delete Photos
On the Photo Menu screen:
To copy the folder:
Select the folder, then press the blue button.
To copy the photo:
1 Select the folder, then press [OK].
2 Select the photos to copy, then press the
blue button.
A check mark
is displayed. Repeat this
step.
• Press the yellow button again to cancel.
2
[HDD] [BD-RE] [BD-R]
[RAM]
3
If the copying destination selection screen is
appeared:
Select the copying destination, then press
[OK].
Select “Yes”, then press [OK].
Copying will start.
Photo and Music
Editing photos
To stop copying
Press and hold [RETURN
] for 3 seconds.
• The name of the copied photos will be changed.
Set up Protection
[BD-RE] [BD-R] [RAM]
appears.
• Even if the protection is set, the photo may
be deleted by another unit.
Cancel Protection
[BD-RE] [BD-R] [RAM]
TQBS0024
69
DMR-BST&BCT765&760EG_eng.book 70 ページ 2017年3月2日 木曜日 午後6時35分
Music
Copying automatically
> [HDD]
§1
Newly added photos will automatically be copied
to the HDD.
1
2
§2
§1
[USB_HDD] [BD-RE] [BD-R]
[RAM] [DVD-R] [+R] [CD]
[USB]
Insert the media.
The menu screen appears. (> 46)
Select “Copy New Photos”, then press [OK].
e.g., [USB]
§2
“For data files (> 23)” only
[DVD-R] [+R] only
Playing music CD (CD-DA)
[CD] (CD-DA)
Insert the disc.
Playback will automatically start.
e.g.,
Copy New Photos
HDD
USB
Music Menu
CD
Track List
Track Name
No.
Start copying ?
Yes
3.43
0.02
Track 1
Play Time
01
02
03
04
05
No
OK
RETURN
3
4
Select “Yes”, then press [OK].
Copying will start.
Once the copy is completed, select “Yes” or
“No”, then press [OK].
To stop copying
Photo and Music
Press and hold [RETURN
] for 3 seconds.
To play other music (track)
Select the item, then press [OK].
Playing music file on the media
[USB_HDD] [DVD-R] [+R] [CD] [USB]
1
2
Insert or connect the media.
The menu screen appears. (> 46)
Select “Play / Copy Music”, then press [OK].
The music list screen appears.
e.g.,
• Photos without shooting date will be categorised using the
creation date.
• The name of the copied photos will be changed.
USB
Music Menu
\ Music \
Parent Folder
Folder 01
Folder 02
music01.mp3
music02.mp3
music03.mp3
music04.mp3
Play
RETURN
Play
3
Page Up
Page 0001/0003
Page Down
Select
Copy
Select the item, then press [OK].
• Repeat this step if necessary.
Playback will start.
• The track/artist/album name will be displayed if the
information is contained in music file.
70
TQBS0024
DMR-BST&BCT765&760EG_eng.book 71 ページ 2017年3月2日 木曜日 午後6時35分
Copying music
Screen icons
Folder
Music
Move to the parent folder
[USB_HDD] [DVD-R] [+R] [CD]§ [USB] > [HDD]
Except [CD] (CD-DA)
§
1
e.g.,
Playing music file on the HDD
1
2
3
On the music list screen:
Select the file or folder.
USB
Music Menu
Press [FUNCTION MENU].
Folder 01
Select “Music” in “Contents on HDD”, then
press [OK].
The music list screen appears.
Folder 02
music01.mp3
music02.mp3
music03.mp3
music04.mp3
Go to step 3 (> 70, “Playing music file on the
media”).
Operations during music play
Stop
\ Music \
Parent Folder
Play
RETURN
Page Down
Select
2
3
Page Up
Page 0001/0003
Play
Copy
Press the blue button.
Select “Yes”, then press [OK].
Press [∫].
To stop copying
Press [;].
• Press [1 a1.3] to restart play.
Search
Press [6] or [5].
• Press [1 a1.3] to restart play.
Skip
Press [:] or [9].
Repeat Play/Shuffle
Refer to “Repeat Play” or “Shuffle” in Basic
Operation menu (> 52).
Sound Effects
Refer to “Sound Effects” in Sound Settings menu
(> 53).
To play music continuously even if the Power
off link works
Refer to “Playing music continuously even after
turning off power to the TV”. (> 79)
Press and hold [RETURN
] for 3 seconds.
Multiple selection
Select the file or folder, then press the yellow
button.
A check mark
is displayed. Repeat this step.
• Press the yellow button again to cancel.
Photo and Music
Pause
• While copying, no other operations can be performed.
Timer recordings will not proceed.
• All files in the folder will be copied.
• Up to 1000 files can be copied at once.
Deleting music
[HDD]
1
2
3
On the music list screen:
Select the file or folder.
• Multiple selection (> above)
Press the red button.
Select “Yes”, then press [OK].
• All files in the folder will be deleted.
TQBS0024
71
DMR-BST&BCT765&760EG_eng.book 72 ページ 2017年3月2日 木曜日 午後6時35分
Network
Network Service
TV Anywhere
Network Service allows you to access some
specific websites supported by Panasonic, and
enjoy Internet contents such as photos, videos,
etc. from Network Service home screen.
Operations such as the ones below can be
performed from anywhere with a smartphone or
tablet installed with Media Center App.
- Setting a recording
- Watching TV with this unit’s tuner
- Playing back programmes recorded on this unit
e.g.,
XXXXXX
Smartphone, tablet
or PC
MORE
BACK
Watching TV
Playback programmes
Preparation
• Perform network connection and settings.
(> 15, 18)
1
2
Press [INTERNET].
• When a message is displayed, read it
carefully and then press [OK].
• NETFLIX can be accessed directly by
pressing [NETFLIX] button.
Select the item, then press [OK].
• Operable buttons:
[3, 4, 2, 1], [OK], [RETURN
buttons and number buttons.
], colour
To exit
Network
Press [EXIT
].
• This unit does not support 4K streaming.
• In the following cases, settings are possible using “Network
Service Settings”. (> 93)
- When restricting the use of Network Service.
- When the audio is distorted.
• If you start recording from external equipment, Network
Service may shut down.
• For information about other disclaimers. (> 107, “Disclaimer”)
72
TQBS0024
Internet
Timer recording
This unit
Use the Media Center App to complete user
registration to use these functions.
For details, please check the following website.
http://panasonic.jp/support/global/cs/av/mediacenter/
(This site is in English only.)
Preparation
• Perform network connection and settings.
(> 15, 18)
• TV Anywhere Settings (> 93)
• This unit will always be connected to the Internet when this
function is activated.
• For information about other disclaimers. (> 107, “Disclaimer”)
DMR-BST&BCT765&760EG_eng.book 73 ページ 2017年3月2日 木曜日 午後6時35分
The DVB-via-IP Server Function allows you to
stream TV broadcasts to a compatible device in
the same network. You can watch broadcasts on
a device provided with the DVB-via-IP Client
function.
• It is not possible to use the DVB-via-IP Server
function and another network function (Network
Service / Home Network) simultaneously.
e.g.,
This unit
(DVB-via-IP Server)
DVB-via-IP Client
compatible equipment§
§
SAT>IP Client device or
device installed with a SAT>IP Client app
Preparation
• Perform network connection and settings.
(> 15, 18)
• Set “DVB-via-IP Server” to “On”. (> 94)
To watch TV broadcasts on a DVB-via-IP
Client device:
Operate the DVB-via-IP Client device. (For details
on how to operate it, refer to its operating
instructions.)
• The DVB-via-IP Server function can stream only one
broadcast at a time.
• This unit will always be connected to the Internet when this
function is activated.
• When the DVB-via-IP Server function is in use, the
following operations cannot be performed:
- Playing back a programme while copying another
programme by using Copy (Keep Picture Quality).
- Copying video/photos/music files
• [BCT765] [BCT760] It is not possible to use the DVB-via-IP
Server function if you change the “TV Signal Selection”
setting (> Step 5 on page 16, “Easy Setting”). Change the
setting of the DVB-via-IP Client device again.
• [BST765] [BST760] It is not possible to use the DVB-via-IP
Server Function when “DiSEqC (Single Tuner)” is selected.
Select a setting that allows you to use two or more tuners.
(> Step 6 on page 17, “Easy Setting”)
Changing the Network Function Priority
setting
In “Network Function Priority”, priority can be
given to either “DVB-via-IP Server” or “Network
Service / Home Network”.
Network Function Priority (> 94):
• DVB-via-IP Server
Priority is given to the DVB-via-IP Server
function.
Network
DVB-via-IP Server
Function (TV>IP)
• Network Service / Home Network
Priority is given to other network functions.
TQBS0024
73
DMR-BST&BCT765&760EG_eng.book 74 ページ 2017年3月2日 木曜日 午後6時35分
Home Networking
(DLNA)
Home Networking (DLNA) allows you to watch the
contents and broadcasts on Server equipment
connected on the same network from Client
equipment.
Using this unit as Server
You can watch broadcasts received by this unit
(Multiroom TV Streaming), videos and photos
saved on HDD of this unit on DLNA (Client)
compatible equipment.
This unit can be used both as Server and Client.
Additionally, if used as Client, this unit can also be
used as Media Renderer, which can be controlled
by a Smartphone, etc.
Preparation
• Perform network connection and settings.
(> 15, 18)
• Perform Home Network settings of the DLNA
compatible equipment.
§
DLNA compatible
equipment (Client)
For details regarding the connection and
operation of equipment connected via a network,
refer to their respective operating instructions.
§
• Ensure that the router for your home network has adequate
security system to prevent unauthorised access.
• If using slow network connection, the video may not be
displayed correctly. A high-speed home network with a
speed of at least 20 Mbps is recommended.
• Some video or broadcasts cannot be enjoyed depending on
the DLNA (Client) compatible equipment, the condition of
this unit, or the file type.
This unit (Server)
DLNA function compatible software should be
installed.
Preparation
• Perform Home Network settings. (> 93)
1
2
Operate the playback equipment (Client) to
display the list of contents on this unit.
Select the item, then press [OK].
Network
• The programmes with access restriction (e.g., copy
restriction) signals sent from broadcasters are not available
for this function.
• If video frames are dropped, change the following settings.
- Conversion Setting for DLNA (> 93)
- Resolution Setting for DLNA (> 94)
• Files not on the HDD cannot be played back.
• Playing back 3D video recorded on this unit may not work
properly.
• 3D photos copied to this unit cannot be played back in 3D.
74
TQBS0024
DMR-BST&BCT765&760EG_eng.book 75 ページ 2017年3月2日 木曜日 午後6時35分
Using this unit as Client
Playable contents
You can share videos, photos and music stored in
the DLNA Certified media server.
When this unit works as a DLNA client, following
contents are playable.
Video
Video
codec
Container
1
2
3
4
DLNA compatible
equipment (Server)
Press [FUNCTION MENU].
Select “DLNA Client” in “Home Network”,
then press [OK].
A list of equipment connected via the
network is displayed.
• This list can be updated by pressing the
green button.
MPEG2
Dolby® Digital .mpg
.mpeg
Linear PCM
MPEG2
H.264
.m2ts
MPEG
.ts
HE-AAC
Dolby® Digital
FR)§1
Recorded
programmes
(DR/HG/HX/
HE/HL/HM)§1
AVCHD§1
H.264
Dolby® Digital .mts
MP4
H.264
AAC
MPEG2
MPEG2
Dolby® Digital .mpg
.mpeg
Linear PCM
MKV
H.264
.mkv
AAC-LC
MP3
®
Dolby Digital
PCM
Vorbis
FLAC
Select the equipment, then press [OK].
Select the item, then press [OK].
• Menu structure will be different depending
on the equipment. Select the contents by
repeating the operation.
• Convenient functions can be used by
pressing [OPTION] depending on the
contents.
• Control Panel
Control Panel is displayed once the
playback starts.
• Press [OK] if the Control Panel is not
displayed. (It may not be displayed
depending on the conditions of use.)
• (While playing video or photo) Press
[RETURN ] to hide the Control Panel.
.mp4
Photo
Format
Example of file extension
JPEG
.jpg
MPO§1, 2
.mpo
§1
§2
Only when the server is another Panasonic
Blu-ray Disc Recorder, etc.
2D playback only.
Audio
Audio codec
Example of file extension
MP3
.mp3
WAV
.wav
AAC
.m4a, .adts
WMA
.wma
FLAC
.flac
DSD
.dsf, .dff
ALAC
.m4a
Linear PCM
• Playlist of Windows Media® Player can play back only the
contents that are stored in the libraries.
• While playing back the 3D programme, you cannot set “3D
Settings”. (> 50)
Example of
file
extension
Network
This unit (Client)
Recorded
programmes
(XP/SP/LP/
Audio codec
–
• Depending on the server, the contents other
than stated above can be played back.
TQBS0024
75
DMR-BST&BCT765&760EG_eng.book 76 ページ 2017年3月2日 木曜日 午後6時35分
Using this unit as Media Renderer
This unit works as Media Renderer, which allows
you to play back the contents on DLNA Server by
operating a Digital Media Controller (a
smartphone, etc.).
Using Smart Home Networking
(DLNA) with Wi-Fi Direct®
Wi-Fi Direct is a standard that enables wireless
LAN devices to communicate each other directly
without a wireless broadband router.
This unit can be connected wirelessly and directly
to other DLNA compatible equipment on a
temporary basis, regardless of the network
connection and settings of this unit.
Connecting temporarily
Server
This unit
(Media Renderer)
Controller§
This unit
Wi-Fi Direct compatible equipment
Server
+
Controller
This unit
(Media Renderer)
§
§
Digital Media Controller compatible software
should be installed.
Following steps are necessary to use this unit as
Media Renderer.
1
2
Network
3
1
2
3
4
Operate the Digital Media Controller
compatible equipment.
To exit from Home Network ( Media Renderer )
screen
Press [RETURN
].
Select “Wi-Fi Direct” in “Home Network”,
then press [OK].
Select the item, then press [OK].
• Set up the device to be connected so that a
Wi-Fi Direct connection can be made. For
details, refer to the operating instructions
for the device to be connected.
Press [FUNCTION MENU].
Select “Media Renderer” in “Home Network”,
then press [OK].
Press [FUNCTION MENU].
5
Select the device to be connected, then
press [OK].
• If the device you want to connect to is not
displayed, switch the connection method
by pressing the yellow button.
When selected “DLNA Client”:
Go to step 4 on page 75.
When selected “DLNA Server”:
Operate the playback equipment (Client).
When selected “Media Renderer”:
Operate the Digital Media Controller.
76
TQBS0024
DMR-BST&BCT765&760EG_eng.book 77 ページ 2017年3月2日 木曜日 午後6時35分
When no devices are found
Wi-Fi Direct Connection
Device not found.
To connect with a Wi-Fi Direct compatible device,
please check connection mode of pairing device and
select “Search again”.
To connect with a Wi-Fi Direct incompatible device,
please select “Next”.
Search again
Next
OK
If the corresponding device is not found even after
the search is run again, select “Next” and change
the connection method.
Using Miracast®
You can enjoy the content you are viewing on a
Miracast-compatible smartphone, etc. on the big
screen of your TV.
• Compatible with AndroidTM device, ver. 4.2 and
above and Miracast certified.
For information on whether the smartphone, etc.
supports Miracast, contact the manufacturer of
the device.
Miracast compatible
equipment
Wi-Fi Direct Connection
Please select connection method. Press RED button to
change the wireless type of connection with
the pairing device.
Press RETURN to finish.
802.11n/g/b (2.4GHz)
WPS (PUSH button)
WPS (PIN code)
Manual setting
Wireless type
OK
RETURN
Select the connection method according to the
device to be connected.
This unit
1
2
3
Press [FUNCTION MENU].
Select “Miracast” in “Home Network”, then
press [OK].
Operate the Miracast compatible equipment.
To exit from Miracast
Press [EXIT
].
Network
Current Wireless type :
TQBS0024
77
DMR-BST&BCT765&760EG_eng.book 78 ページ 2017年3月2日 木曜日 午後6時35分
With Other
Equipment
Recording from
external equipment
Copying the HD Video
(AVCHD)
Picture quality: XP, SP, LP
§
Preparation
• The video equipment (VCR) connections (> 13)
• If you want to change the picture quality
(> 31, To change the recording mode (picture
quality))
1
2
3
4
video camera, etc.
§
e.g.,
Press [INPUT SELECT] and select “AV”,
then press [OK].
Start play on the video equipment.
Press [REC ¥].
USB connection cable
(optional)
Set the time to record. (> 30)
1
REC1/OTR
Input AV
Automatic Stop
Recording Time
30 min
Continuous recording
To stop recording
Press [∫].
Manually programming timer recording from
external equipment (> 35)
With Other Equipment
“For data files (> 23)” only
• Following contents or media cannot be played back while
recording from external equipment.
- BD-Video
- MKV and AVCHD file
- photo
- music files other than CD-DA
- USB HDD (For data files, > 23) and USB memory
2
3
4
Connect a video camera that has been
turned on or insert a media.
• Make the video camera ready for data
transfer.
The menu screen of this unit appears. (> 46)
Select “Copy Video ( AVCHD )”, then press
[OK].
If the copying destination selection screen is
appeared:
Select “Copy to HDD” or “Copy to Blu-ray
Disc”, then press [OK].
Select a programme stored on the video
camera, then press the yellow button.
A check mark
is displayed. Repeat this step.
• Press the yellow button again to cancel.
5
6
Press [OK].
Select “Start”, then press [OK].
It will automatically format the unformatted
disc, such as a new disc.
• It may take time for the copying to start.
To stop copying
Press and hold [RETURN
] for 3 seconds.
Screen icons
About other screen icons
Refer to “Screen icons”. (> 43)
78
TQBS0024
DMR-BST&BCT765&760EG_eng.book 79 ページ 2017年3月2日 木曜日 午後6時35分
VIERA Link
What is VIERA Link?
VIERA Link is a convenient function which will link
the operations of this unit and a Panasonic TV
(VIERA) or an amplifier/receiver. You can use this
function by connecting the equipment with the
HDMI cable. See the operating instructions for
connected equipment.
Automatic input switching/
Power on link
When the following operations are performed, the
input channel of the TV will be automatically
switched and the screen of this unit will be
displayed. Additionally when the TV is off, the TV
will automatically turn on.
- When play starts on this unit
- When the Video Menu is displayed
Easy control only with Panasonic TV’s
remote control
You can operate this unit using the TV remote
control.
Refer to the operating instructions of the TV about
the buttons that you can use.
• VIERA Link, based on the control functions provided by
HDMI which is an industry standard known as HDMI CEC
(Consumer Electronics Control), is a unique function that
we have developed and added. As such, its operation with
other manufacturers’ equipment that supports HDMI CEC
cannot be guaranteed.
• These functions may not work normally depending on the
equipment condition.
• Use the remote control supplied with this unit if you cannot
operate this unit using buttons on the TV remote control.
• The information provided on this page is correct as of
March 2017 and is subject to change.
Power off link
When you set the TV to standby mode, this unit is
also automatically set to standby mode.
• Power off link function does not work when
recording, copying etc.
Playing music continuously even after
turning off power to the TV
The following operations make it possible to keep
the power of the unit on and to play music
continuously.
When the unit is directly connected to an
amplifier/receiver.
1 While playing music
Press [OPTION].
2 Select “TV Power Off”, then press [OK].
Other functions
Other
functions
• Sound may be discontinued for several seconds
when the power to the TV is turned off.
TQBS0024
79
DMR-BST&BCT765&760EG_eng.book 80 ページ 2017年3月2日 木曜日 午後6時35分
Software (Firmware)
Update
You cannot operate the unit until the update
is complete. Don’t remove the AC mains lead
during the update. Removing the AC mains
lead while the update is in progress may
damage the unit.
Update software (firmware) of this unit
Software of this unit can be updated automatically
by the following methods at the specified time.
• From broadcasts
(Default setting is 3 a.m. > 96, Software
Update in Standby)
• [BCT765] [BCT760]
[DVB-C] The CATV terminal connection is not
applicable to this function.
• It may take up to a few hours until the update is completed
depending on the network environment.
• The timer recording always takes preference over the
software (firmware) download; if the timer recording is
scheduled to start, the downloading will be performed at the
next opportunity.
• You can also download the latest software (firmware) from
the following website.
http://panasonic.jp/support/global/cs/
CI Plus compatible CAM software
(firmware) update
Software (firmware) of CAM (compatible CI Plus)
can be updated automatically from broadcasts.
Availability of software (firmware) update is
detected while viewing the programmes that are
compatible with CI Plus.
1
When notification is displayed on the screen,
select “Yes” and press [OK].
• If for some reason the notification is not
displayed, or if cancelled, the notification is
instead displayed on the channel
information (> 26).
• From Internet
Network connection and setting are required.
(> 15, 18)
If a software (firmware) update is available, a
notification is displayed.
e.g.,
10:30
NEWS
9:00 - 11:00
New software version has been found.
The software will be updated automatically
after this unit is switched to standby.
Do not disconnect the AC mains lead.
Update of the software (firmware) will start when
the unit is turned to standby mode.
To update the software (firmware)
immediately
Other functions
Use the “Software Update Now ( Broadcast )”
function or “Software Update Now ( Internet )”
function. (> 96)
• [BCT765] [BCT760]
[DVB-C] Some cable providers do not support
this function.
80
TQBS0024
Now
All DVB Channels
CAM Upgrade Info
Change category
To execute CAM software upgrade, press
the red button.
2
Follow the instructions on the screen.
• Operations such as view, playback, or record cannot be
performed while upgrading the CAM.
Any buttons on the remote control or the unit cannot be
used while upgrading the CAM.
• If the timer recording is started, CAM software upgrade is
cancelled to start recording.
• For details, refer to your CAM’s operating instructions or
consult your dealer.
DMR-BST&BCT765&760EG_eng.book 81 ページ 2017年3月2日 木曜日 午後6時35分
Other operations
Media management
[BD-RE] [BD-R] [RAM] [DVD-R] [DVD-RW] [+R] [+RW]
1
Press [FUNCTION MENU].
2
Select “Media”, then press [OK].
3
Select the media, then press [OK].
4
Select the item, then press [OK].
• Selectable items will change depending on
the selected item and inserted media.
Disc Name
[BD-RE] [BD-R] [RAM] [DVD-R] [DVD-RW] [+R] [+RW]
This function is to name a disc.
Refer to “Entering text”. (> 83)
• The disc name is displayed in the Blu-ray Disc
Management/DVD Management window.
• [DVD-R] [DVD-RW] [+R] With a finalised disc, the
name is displayed on the Top Menu.
• [+RW] The disc name is displayed only if you
play the disc on other equipment after creating
Top Menu.
• Do not perform this operation before copying HD Video
(AVCHD) to DVD-R or DVD-R DL. (> 66)
Disc Protection
[BD-RE] [BD-R] [RAM]
Select “Yes”, then press [OK].
e.g.,
Disc Name
Disc Protection
Delete all programmes
[BD-RE] [BD-R] [RAM]
1 Select “Yes”, then press [OK].
2 Select “Start”, then press [OK].
• Photo data (JPEG/MPO) or computer data cannot be
deleted.
Format Disc
[BD-RE] [RAM] [DVD-RW] [+RW]
[BD-R] [+R] (New disc only)
Formatting deletes all contents (including
computer data), and they cannot be restored.
Check carefully before proceeding.
1 Select “Yes”, then press [OK].
2 Select “Start”, then press [OK].
3 Press [OK].
[RAM] To stop formatting
Press [RETURN ].
• You can cancel formatting if it takes more than
2 minutes. The disc must be reformatted if you
do this.
• Do not disconnect the AC mains lead while formatting.
This can cause the disc unusable.
• The contents are deleted when you format a disc even if
you have set protection.
• When a disc has been formatted using this unit, it may not
be possible to use it on any other equipment.
• It will become DVD Video format when a DVD-RW recorded
in DVD Video Recording format is formatted with this unit.
• [RAM] Formatting normally takes a few minutes; however, it
may take up to a maximum of 70 minutes.
On
Other functions
Delete all programmes
• To release the protection
Repeat the same steps.
• The screen icon will be switched to “Off”.
TQBS0024
81
DMR-BST&BCT765&760EG_eng.book 82 ページ 2017年3月2日 木曜日 午後6時35分
Top Menu
Finalise
[DVD-R] [DVD-RW] [+R] [+RW]
You can select the background for DVD-Video
Top Menu.
[DVD-R] [DVD-RW] [+R] (You can play the disc on
compatible DVD players by finalising it on the
unit.)
Select the background, then press [OK].
[BD-R] (Finalising BD-R prevents accidental
recording or editing.)
Auto-Play Select
[DVD-R] [DVD-RW] [+R] [+RW]
You can select whether to show the Top Menu
after finalising or creating Top Menu.
Select “Top Menu” or “Title 1”, then press [OK].
Top Menu:
The Top Menu appears first.
Title 1:
The disc content is played without displaying the
Top Menu.
1 Select “Yes”, then press [OK].
2 Select “Start”, then press [OK].
3 Press [OK].
After finalising
• [BD-R] [DVD-R] [+R] The disc becomes play-only
and you can no longer record or edit.
• [DVD-RW] You can record and edit the disc after
formatting.
Other functions
• Do not disconnect the AC mains lead while finalising.
This can cause the disc unusable.
• You cannot cancel finalising.
• Finalising takes up to 15 minutes (Up to 60 minutes in case
of DVD-R DL and +R DL).
• Depending on the disc, it may take longer than displayed on
the confirmation screen (approximately four times longer).
• You cannot finalise discs recorded on other manufacturer’s
equipment.
• [DVD-R] [DVD-RW] [+R] If you finalise discs recorded on
Panasonic equipment other than this unit, the background
selected as “Top Menu” may not be displayed.
• Discs finalised on this unit may not be playable on other
players due to the condition of the recording.
82
TQBS0024
DMR-BST&BCT765&760EG_eng.book 83 ページ 2017年3月2日 木曜日 午後6時35分
Create Top Menu
[+RW]
You can create Top Menu for displaying on other
equipment.
Make selections from “Top Menu” and “Auto-Play
Select” before creating Top Menu.
Entering text
Preparation
• Show the “Enter Programme Name” screen, etc.
1
Select a character, then press [OK].
Repeat this step to enter other characters.
e.g.,
1 Select “Yes”, then press [OK].
2 Select “Start”, then press [OK].
3 Press [OK].
Name field:
shows the text you have
entered
Enter Programme Name
• You cannot use the Top Menu for playing on this unit.
• The created menu is deleted when you record or edit the
disc.

HOLD function
1
2
3
4
5
6
7
8
9
0

Delete
q
w
e
r
t
y
u
i
o
p

Finish
a
s
d
f
g
h
j
k
l
.
z
x
c
v
b
n
m
@
*
#
/
:
~
_
-
,
;
‘
“
Symbols
Alphanumeric
Other Characters
OK
The HOLD function deactivates all buttons on the
unit and remote control.
RETURN
• Red: Enter Symbols
• Green: Enter Alphanumeric characters
• Yellow: Enter Other Characters, such as
umlaut mark or accent grave
• [;]: Delete a character
Press and hold [OK] and [RETURN ]
simultaneously until “X HOLD” appears on the
front panel display.
To cancel the HOLD function
• [1 a1.3]: Shift the alphabetic characters
on the screen to upper case/lower case
2
Press [∫] (Finish).
“Writing...” appears then the screen returns
to the previous screen and so on.
To end partway
Press [RETURN
]. (Text is not added.)
• The maximum number of characters depends on the
media.
Other functions
Press and hold [OK] and [RETURN ]
simultaneously until “X HOLD” disappears.
Shift
TQBS0024
83
DMR-BST&BCT765&760EG_eng.book 84 ページ 2017年3月2日 木曜日 午後6時35分
Basic Settings
Setup
[BCT765] [BCT760] DVB Tuning
You can change the unit’s settings of DVB Tuning,
Sound, Display, Connection, Network etc. in the
menu.
Favourites Edit
1
2
After editing as follows, save the Favourites.
Press [FUNCTION MENU].
Select “Basic Settings” in “Setup”, then press
[OK].
Basic Settings
DVB Tuning
HDD / Disc / USB HDD
Picture
Sound
Display
Connection
Network
Others
OK
RETURN
3
4
Select the menu, then press [OK].
Select the item, then make the setting.
To return to the previous screen
Press [RETURN
].
You can create four favourites of channels for
making viewing and recording easier.
Press [RETURN
], then press [OK].
• To select the other Favourites list:
Press the green button.
• To add channels to the Favourites list:
Select the channel in the “All DVB Channels”
column, then press [OK]. Repeat this step.
• Red: Change the sorting mode.
• Yellow: Add continuous block of channels to
the list at once.
• Press [3, 4] to make the block, then press
[OK].
• Blue: Select the Category.
• To change the order of the channels list:
1 Select the channel in the “Favourites”
column to move, then press the green
button.
2 Select the new position, then press the
green button.
• To delete channels:
Select the channel in the “Favourites” column,
then press [OK].
• Yellow: Delete all channels.
• To change the name of the Favourites list:
1 Press the red button in the “Favourites”
column.
2 Press [3, 4, 2, 1] to select a character,
then press [OK].
Repeat this step to enter other characters.
• Red: Delete a character.
• Blue: Delete all characters.
Setup
3 Press [RETURN
84
TQBS0024
].
DMR-BST&BCT765&760EG_eng.book 85 ページ 2017年3月2日 木曜日 午後6時35分
Auto Setup
[DVB-C] Settings for DVB-C Channels
You can restart the Auto Setup. (> 16)
1 Select “Yes”, then press [OK].
• If the country selection screen appears:
Select the country, then press [OK].
2 Follow the on-screen instructions and make
the following settings.
[DVB-C]
1 Select “Digital Cable Channels”, then
press [OK].
2 Select “Preset Channel Number” or
“Operator’s Channel Number ( LCN )”,
then press [OK].
3 Select the items and change the items.
(For details, consult the cable provider.)
Search Mode
• All Channels
• Free Channels
Scan Mode
• Quick:
Scans the suitable frequency for the
selected country.
• Full:
Scans the whole frequency range.
Frequency/Symbol Rate/Network ID
Normally set to “Auto”.
If “Auto” is not displayed or if necessary,
enter the value specified by your cable
provider with number buttons.
4 Select “Start scan”, then press [OK].
Auto Setup starts.
[DVB-T] Settings for DVB-T Channels
[DVB-T]
Select “Digital Terrestrial Channels”, then
press [OK].
Auto Setup starts.
Channel List
You can edit the channel list.
• To hide/reveal channels
1 Select the channel.
2 Press [OK].
The check mark is removed/displayed.
• Red: Change the sorting mode.
• Yellow: Reveal all channels.
• Blue: Change the Category.
• To move the channel number assignment
1 Select the channel to move, then press
the green button.
2 Enter the channel number to reassign
with the number buttons.
3 Press [OK].
Manual Tuning
You can add new channels manually.
[DVB-C]
1 Adjust the frequency, symbol rate and
service ID. (For details, consult the cable
provider.)
• Adjust the frequency by checking the
signal strength and signal quality
displays.
2 Select “Start scan”, then press [OK].
• The set channel is displayed in the table.
[DVB-T]
1 Press [3, 4] to select the frequency.
• Adjust the frequency by checking the
signal strength and signal quality
displays.
2 Press [OK] to start scan.
• The set channel is displayed in the table.
Setup
• The timer recording programmes are cancelled.
• If the channel you are looking for is not found, select “Full”
for “Scan Mode”. (> above)
TQBS0024
85
DMR-BST&BCT765&760EG_eng.book 86 ページ 2017年3月2日 木曜日 午後6時35分
Update Channel List
Preferred Language
You can update the channel list to the latest
one.
Select the language for multi broadcast.
If the selected language is not available, the
original language will be selected.
Signal Condition
You can check the quality and strength of
signals.
Press [CH W X] to select the channel.
[DVB-C]
• When the signal is too strong (red bar), reduce the
CATV signal. (For details, consult your dealer or the
cable provider.)
• When the signal is weak, check that the current
broadcast channel is correctly broadcasting.
[DVB-T]
• The channels you can receive are affected by weather
conditions, seasons, time (day/night), region, length of
the cable that is connected to the aerial, etc.
• When the signal is too strong (red bar), reduce the
signal amplification at your aerial. (For details, consult
your dealer.)
New Channel Message
Set whether to obtain the information
automatically when a new DVB channel is
added.
HbbTV Setting
Turn on/off the HbbTV service.
• When “On” is selected, HbbTV service are
available.
[BST765] [BST760] DVB Tuning
Favourites Edit (> 84)
Auto Setup
You can restart the Auto Setup. (> 17)
1 Select the Auto Setup method, then press
[OK].
• Search by selected satellite
Transponders for the already found satellite
are searched for channels.
• Search all satellites
All satellites and transponders are searched
for channels.
2 Select “Yes”, then press [OK].
Child Lock
You can restrict the viewing/playback/recording
of channels unsuitable to children.
• PIN is required to change. (> 27)
Child Lock List
1 Select the channel or AV input to lock.
2 Press [OK].
is displayed.
• Press [OK] again to cancel.
• Green: Lock all channels.
• Yellow: Unlock all channels.
Parental Rating
Setup
Set a ratings level to limit broadcast viewing
and playback.
• Follow the on-screen instructions.
86
TQBS0024
• The timer recording programmes are cancelled.
Settings for DVB-S Channels
Channel List (> 85)
Manual Tuning
You can add new channels manually.
1 Select the items and change the items.
• Change the items by checking the signal
strength and signal quality displays.
2 Select “Start scan”, press [OK] to start
scan.
• The set channel is displayed in the table.
DMR-BST&BCT765&760EG_eng.book 87 ページ 2017年3月2日 木曜日 午後6時35分
Update Channel List
Signal Condition
You can update the channel list to the latest
one.
1 Select the method and settings.
Search Mode
• Free Channels
• All Channels
You can check the quality and strength of
signals.
• Press [2, 1] to select the tuner.
• Press [CH W X] to select the channel.
• If the channel you are looking for is not found, select
“Full” for “Scan Mode”. (> above)
Exchange Channel List
Exports/Imports DVB-S Channel List settings
using the USB device to share the same
settings with another DIGA which has the
same function.
• Export Channel List
You can export the channel list of this unit to
the USB device.
• Import Channel List
You can import the channel list of another
DIGA from USB device.
• The channels you can receive are affected by weather
conditions, seasons, time (day/night), region, length of
the cable that is connected to the aerial, etc.
• When the signal is too strong (red bar), reduce the
signal amplification at your aerial.
• When the signal is weak:
- adjust the position and direction of the dish.
- check that the current digital broadcast channel is
correctly broadcasting.
Antenna System
You can receive several satellites if you have
DiSEqC control antenna system or single
cable router.
1 Select “Antenna System”.
2 Press [2, 1] to select antenna system.
• One LNB
Compatible with Single LNB.
• MiniDiSEqC
Up to 2 LNBs can be controlled.
• DiSEqC1.0
Up to 4 LNBs can be controlled.
• Single Cable
Compatible with single cable router.
LNB Configuration
You can set LNB setting and User Band when
necessary.
• If you do not know the connected satellite,
select “No Satellite” in “Satellite”. (Available
satellite will be searched in Auto Setup.)
• If you select “User defined” in “Satellite”, set
“Test Transponder Frequency” manually.
Preferred Language (> 86)
HbbTV Setting (> 86)
Setup
Scan Mode
• Quick
Scans the suitable frequency for the
selected satellite.
• Full
Scans the whole frequency range.
2 Press [OK].
The unit starts searching for newly
available satellite digital channels.
TQBS0024
87
DMR-BST&BCT765&760EG_eng.book 88 ページ 2017年3月2日 木曜日 午後6時35分
HDD / Disc / USB HDD
Settings for Playback
3D BD-Video Playback
Select the playback method of 3D compatible
video software.
Soundtrack
Select the audio language.
• Enter a code with the number buttons when
you select “Other ¢¢¢¢”.
(> 106, Language code list)
Subtitles
Select the language for subtitle.
• Enter a code with the number buttons when
you select “Other ¢¢¢¢”.
(> 106, Language code list)
Menu
Select the language for disc menus.
• Enter a code with the number buttons when
you select “Other ¢¢¢¢”.
(> 106, Language code list)
BD-Live
You can restrict Internet access when
BD-Live functions are used.
• If “On ( Limit )” is selected, Internet access
is permitted only for BD-Live contents which
have content owner certificates.
BD-Video Parental Control
Set an age limit of BD-Video play.
• PIN is required to change. (> 27)
Pure Sound mode
You can enjoy movies or music in an
environment more suitable for viewing by
stopping the rotation of the HDD when playing
back commercial BD-Videos, DVD-Videos or
music CDs.
• If “On” is selected, timer recording does not
start while playing back BD-Video,
DVD-Video or music CD.
Settings for Recording
Timer Record Start Buffer
This function sets the timer recording to start
earlier than the TV Guide time.
Timer Record Stop Buffer
This function sets the timer recording to stop
later than the TV Guide time.
REWIND LIVE TV
Turn on/off the REWIND LIVE TV function.
Recording for Encrypted Channel
The function allows you to change the
recording limitation on the encrypted
programme. (> 32)
[BST765] [BST760]
• “Automatic” cannot be selected in the
following cases.
- “DiSEqC (Single Tuner)” has been
selected in “Easy Setting” or “Auto Setup”.
(> 17, 86)
- When “DVB-via-IP Server” is set to “On”.
(> 94)
PIN Entry for Decrypt Recording
DVD-Video Parental Control
Set a rating level to limit DVD-Video play.
• PIN is required to change. (> 27)
Subtitle Text
Setup
Select the language for MKV subtitles text.
• This item is displayed only after playing
back a MKV file with subtitle text.
88
TQBS0024
If your CAM requires a PIN for timer
recording, it can be entered here in advance.
DMR-BST&BCT765&760EG_eng.book 89 ページ 2017年3月2日 木曜日 午後6時35分
Aspect for Recording
Delete all photos
Sets the aspect ratio when recording or
copying except in DR mode.
• “HG”, “HX”, “HE”, “HL” or “HM” mode:
If “Automatic” is selected, the programme
will be recorded with the original aspect
ratio.
• “XP”, “SP”, “LP” or “FR” mode:
If “Automatic” is selected, the programme
will be recorded with the original aspect
ratio at the time when recording started
(including when recording started at a
commercial, etc.).
Delete all photos on the built-in HDD.
• In the following cases, aspect is fixed to 4:3.
- When copying to a +R, +R DL and +RW.
Delete all music
Delete all Music on the built-in HDD.
Format HDD
Formatting deletes all contents on the
built-in HDD, and they cannot be restored.
Check carefully before proceeding.
Settings for USB HDD
USB HDD Registration
Register the USB HDD. (> 41)
USB HDD Disconnection
Set the Chapter Creation method.
• Even if “Automatic” is selected, depending
on the programme to be recorded, the
chapter may not be created correctly.
Disc Speed for Copy
Select the speed for Copy (Keep Picture
Quality).
HDD Management
Press and hold [OK] for 3 seconds to show the
following settings.
Delete all programmes
Delete all recorded programmes and AVCHD
on the built-in HDD.
• Delete does not work if one or more
programmes are protected.
Delete all videos ( MP4 / MKV )
Delete all videos (MP4/MKV) on the built-in
HDD.
This function puts the USB HDD in a state in
which it can be safely disconnected. (> 41)
USB HDD Management
Press and hold [OK] for 3 seconds to show
the following settings.
Delete all programmes
Delete all programmes on the USB HDD.
• Delete does not work if one or more
programmes are protected.
Format USB HDD
Formatting deletes all contents, and
they cannot be restored. Check
carefully before proceeding.
Cancellation of all USB HDD Registrations
This function cancels the registrations of all
the USB HDDs registered on this unit.
Only do this if you are going to dispose of this
unit.
• Before operation, perform “USB HDD Disconnection”
(> above) and remove the USB HDD.
Setup
Chapter Creation
TQBS0024
89
DMR-BST&BCT765&760EG_eng.book 90 ページ 2017年3月2日 木曜日 午後6時35分
Picture
Digital Audio Output
Still Mode
PCM Down Conversion
Select the type of picture shown when you pause
play.
• Field:
Select if jittering occurs when “Automatic” is
selected. (The picture is coarser.)
• Frame:
Select if small text or fine patterns cannot be
seen clearly when “Automatic” is selected.
(The picture is clearer and finer.)
Select how to output audio with a sampling
frequency of 96 kHz.
• On:
Signals are converted to 48 kHz.
(Choose when the connected equipment
cannot process signals with a sampling
frequency of 96 kHz.)
• Off:
Signals are output as 96 kHz.
- When the signals have a sampling
frequency of over 96 kHz.
• The signals will be converted to 48 kHz
regardless of the setting in the following
cases.
- When the disc has copy protection.
- When “BD-Video Secondary Audio” is
set to “On”. ([BD-V]) (> 91)
Sound
Dynamic Range Compression
To lower the dynamic range for playback (e.g., at
night).
• This does not work depending on broadcasts
and recorded programmes.
Downmix
Select the downmix system of multi-channel to
2-channels sound.
• Select “Surround encoded”, when the
connected equipment supports the virtual
surround function.
• There is no effect on “Bitstream” via HDMI AV
OUT and DIGITAL AUDIO OUT terminal.
• The audio will be output in “Stereo” in the
following cases.
- AVCHD playback
- [BD-V] : Playback of clicking sound on the
menu and audio with secondary video in
picture-in-picture mode.
Bilingual Audio Selection
Select whether to record the audio type (“M1” or
“M2”) when:
- Picture Quality Change (> 56)
Setup
- Copying to a DVD-R, DVD-RW, +R and +RW.
90
TQBS0024
Dolby D / Dolby D + / Dolby TrueHD
DTS / DTS-HD
MPEG
Select the audio signal to output.
• Select “PCM” when the connected
equipment cannot decode the respective
audio format.
• Not making the proper settings may result in
noise.
System Volume Adjustment
If the volume of a programme being watched
through this unit is different than the volume
of a programme being watched directly on the
TV, the gap may be reduced by switching this
setting to Mode 1 or Mode 2. (This function
works only while you are watching a
programme or playing back a programme
recorded in DR mode with this unit.)
DMR-BST&BCT765&760EG_eng.book 91 ページ 2017年3月2日 木曜日 午後6時35分
BD-Video Secondary Audio
Turn on/off the clicking sound on the menu
and audio with secondary video.
Connection
3D Settings
3D AVCHD Output
following settings:
- Dolby D / Dolby D + / Dolby TrueHD: “Bitstream”
- DTS / DTS-HD: “Bitstream”
- BD-Video Secondary Audio: “Off”
Dolby Atmos is a trademark of Dolby Laboratories.
If 2D AVCHD video is recognised as 3D video
and cannot be played back correctly, you may
be able to play it by changing the setting.
3D Playback Message
Set to display or hide the 3D viewing warning
screen.
Audio Delay
VIERA Link
Mis-sync between the video and audio is
corrected by delaying the audio output.
Select “Off” when you do not want to use VIERA
Link.
Display
Language
Select the language for on-screen menus.
On-Screen Information
Select the time until the channel information
screen (> 26) disappears automatically.
Front Panel Display
Changes the brightness of the front panel
display.
• If “Automatic” is selected, the display turns dark
during play and disappears when the unit is in
standby mode. While using this mode, the
standby power consumption can be reduced.
• When “Quick Start” is set to “Off” or “Timer
Setting for Quick Start” (> 95), this function is
fixed to “Automatic”.
Screen Saver
This is to prevent image retention on the screen.
Teletext
Select the Teletext (> 27) display mode.
Aspect for 4:3 Video
To play a 4:3 content, set how to show pictures
on a 16:9 TV.
• 4:3:
Picture output expands left or right.
• 16:9:
Picture is output as original aspect with side
panels.
TV System
Set in accordance with the TV System for the
connected TV.
HDMI Connection Settings
Video Format
You can only select items compatible with the
connected equipment.
• If “Automatic” is selected, the output
resolution best suited to the connected TV
(4K, 1080p, 1080i, 720p or 576p/480p) is
automatically selected.
• To enjoy High Quality Video up-converted to
1080p, you need to connect the unit to
1080p compatible HDTV. If this unit is
connected to an HDTV through other
equipment, it must also be 1080p
compatible.
TQBS0024
91
Setup
• To enjoy BD-Video that supports Dolby AtmosR or
DTS:XTM
Connect this unit to an AV amplifier or similar device
that supports it with an HDMI cable, and select the
DMR-BST&BCT765&760EG_eng.book 92 ページ 2017年3月2日 木曜日 午後6時35分
24p Output
When playing BD-Video recorded in
24 frames, this unit displays each frame at
1/24 second intervals–the same interval
originally shot with the film movie.
• When this unit is connected to TV
compatible with 4K/24p and “Video Format”
is set to “Automatic”, images will be output
in 4K/24p.
• When this unit is connected to a TV
compatible with 1080/24p and “Video
Format” is set to “Automatic”, “1080i” or
“1080p”, images will be output in 1080/24p.
• When BD-Video images other than 24p are played,
images are output at 60p.
• This unit cannot output 4K image when playing back in
3D.
Deep Colour Output
Set the output method to be used when this
unit is connected to a TV that supports Deep
Colour.
Audio Output
Select “Off” when connected to an
amplifier/receiver with a DIGITAL AUDIO
OUT terminal.
Contents Type Flag
If “Automatic” is selected, the optimal method
of playback depending on the TV (e.g.
cinema) will automatically be selected (only
when the TV supports Contents Type Flag).
Common Interface
Access to software contained on CI module.
(> 9)
• Select “Slot 1:” or “Slot 2:” and press [OK].
Follow the on-screen instructions.
Network
Easy Network Setting
Press [OK] to start Easy Network Setting. (> 18)
Network Settings
LAN Connection Mode
Select the LAN connection method.
• When not using wireless LAN (when turning
it off), select “Wired”.
Wireless Settings
This allows to set and check the connection
settings of the Wireless router.
Search for wireless network
WPS (PUSH button)
WPS (PIN code)
Manual setting
Select a connection method to wireless
access point.
IP Address / DNS Settings
Check the connection of the network or set
the IP address and DNS.
• To set the IP address and DNS
1 Set “IP Address Auto-Assignment” and
“DNS-IP Auto-Assignment” to “Off”.
2 Select the item, then press [OK] to show
the respective setting.
• When the router’s DHCP server function is
not activated, check the numbers of other
connected devices such as personal
computers, then assign a number different
from those of other devices for the “IP
Address” and assign the same number for
“Subnet Mask” and “Gateway Address”.
Setup
Proxy Server Settings
• On-screen instructions may not correspond to the remote
control buttons.
• For more information about TV service, please contact
your service provider.
• Depending on the card, in some cases its use together
with this unit may be limited or not possible.
92
TQBS0024
Check and set the connection to the Proxy
server.
• Press [OK] to show the respective setting.
DMR-BST&BCT765&760EG_eng.book 93 ページ 2017年3月2日 木曜日 午後6時35分
Network Service Settings
Second Screen Browsing
When this function is set to “On”, you can
enjoy the content you are viewing on a
Network Service application of
smartphone, etc. with the home network
on the big screen of your TV.
Lock
You can restrict using Network Service.
• PIN is required to change. (> 27)
Automatic Volume Control
Volume is adjusted automatically to the
standard volume while using Network
Service.
• Depending on contents, this function will
not work.
• Select “Off” when the audio is warped.
Home Network Settings
You can set the DLNA (Server) function.
(> 74)
Home Network function
You can switch between enable/disable of
the DLNA (Server) and DMR (Media
Renderer) function.
• If “On” is selected, the setting for “Quick
Start” is fixed to “On”. (> 95)
• If “Off” is selected, the setting for “TV
Anywhere” and “Networked Standby” is
fixed to “Off”. (> left, 95)
• When you set “Networked Standby” to
“On”, the setting for this function will also
be changed to “On”, but “Quick Start” will
remain set to “Off”.
• This cannot be set to “On” if the
connection with the wireless broadband
router is not encrypted in the wireless
connection.
Notice
Displays the terms of service for the cloud
services.
• You must agree to the terms of use for
the Internet function and the privacy
policy.
TV Anywhere Settings
You must register to a service to use this
function.
TV Anywhere
When you control this unit from a
smartphone or a tablet away from home,
set this function to “On”. (> 72)
Device ID
This is the device ID and device password
required for registering to and using a
service. (> 72)
Setting device name
It is also possible to change the name of
this unit on the network.
• Select from a preset list
Select the preset name, then press [OK].
• Create name
Enter the name.
Refer to “Entering text”. (> 83)
Conversion Setting for DLNA
• On:
When playing back on DLNA (Client)
compatible equipment, this setting
reduces the chance of break-ups and
freezing of an image by lowering the
image quality.
• When this is set to “On”, switching the channel or
starting playback will take longer.
Initialize Device Password
Setup
The device password for this unit is
initialized. (> 72)
• When you initialize the device password,
you will not be able to use TV Anywhere.
To use the TV Anywhere again, you must
re-register to the service.
TQBS0024
93
DMR-BST&BCT765&760EG_eng.book 94 ページ 2017年3月2日 木曜日 午後6時35分
Resolution Setting for DLNA
When “Conversion Setting for DLNA” is set
to “On”, select the image quality.
Registration type for remote devices
• Automatic:
All connected devices on the same
network can access this unit.
• Manual:
Only registered devices can access this
unit.
Remote device list
• To register equipment manually
1 Select the device name or the MAC
Address for the device you want to
register, then press [OK].
2 Select “Yes”, then press [OK].
• To deregister equipment
1 Select the registered equipment,
then press [OK].
2 Select “Yes”, then press [OK].
Setup
• This function cannot be enabled when
“Automatic” is selected in “Registration type for
remote devices”. (> above)
• The maximum number of equipment that can be
registered is 16.
94
TQBS0024
DVB-via-IP Server Function
DVB-via-IP Server
Turn on/off the DVB-via-IP Server
function.
• If “On” is selected, the setting for “Quick
Start” is fixed to “On”. (> 95)
Network Function Priority
It is not possible to use the DVB-via-IP
Server function and another network
function (Network Service / Home
Network) simultaneously.
Priority can be given to either of these
functions. (> 73)
• DVB-via-IP Server:
Priority is given to the DVB-via-IP Server
function. When using the DVB-via-IP
Server function, it is not possible to use
another network function on this unit.
Conversely, when using the network
function on this unit, it is not possible to
use DVB-via-IP Server function.
• Network Service / Home Network:
Priority is given to other network
functions. When using the DVB-via-IP
Server function, if you use another
network function on this unit, the former
stops. Conversely, when using another
network function on this unit, it is not
possible to use the DVB-via-IP Server
function.
DMR-BST&BCT765&760EG_eng.book 95 ページ 2017年3月2日 木曜日 午後6時35分
Others
[BCT765] [BCT760]
[DVB-C] RF OUT ( CATV Signal )
Standby Settings
Quick Start
• On:
It is possible to start quickly from standby
mode.
• Off:
Power consumption in standby mode is
minimised. (> 104)
However, startup time from standby mode
will be longer.
• Timer Setting for Quick Start:
“Quick Start” is activated when the set time
comes.
• When “Home Network function” (> 93), “TV
Anywhere” (> 93) or “DVB-via-IP Server” (> 94) is set
to “On”, the setting for this function is fixed to “On”.
• If “Off” or “Timer Setting for Quick Start” is selected, the
setting for “Front Panel Display” in “Display” is fixed to
“Automatic”. (> 91)
Automatic Standby
Set the time to turn the unit to standby mode
automatically.
When the unit is not operating, the unit will be
turned to standby mode once the set time has
passed.
Automatic Standby after OTR
• On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing “Automatic Stop” or
“Recording Time” (> 30).
Automatic Standby after Copy
[DVB-T] RF OUT ( Aerial Signal )
Set whether to output the broadcasting signal
from RF OUT or not while in standby mode
(When “Quick Start” is not activated).
• If “On” is selected, the broadcasting signal
is output from this unit.
Networked Standby
This unit can be turn on using a wake-up
message sent from the network device in the
home network. (Available only when “Quick
Start” is set to “Off”.)
• On:
- Power consumption increases when this
unit is in standby mode. (> 104)
- This unit can be used as a DLNA Server
when this unit is in standby mode. (This is
possible if you have ever connected your
client Panasonic recorder to the network
using this unit as a server.)
• Off:
- Power consumed when this unit is in
standby mode becomes smaller than that
consumed when “On” is selected. (> 104)
- When this unit is in standby mode, it
cannot be used as a DLNA Server.
• When you change the “On”/“Off” setting of
this function, the “On”/“Off” setting of “Home
Network function” also changes.
• If “Quick Start” and “Home Network function”
are set to “On”, even when this unit is turned
off, it can be used as a DLNA Server.
• This function may not work correctly depending on
network environment.
Setup
• On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing copy (> 61, Copying from
media other than HDD with Video Menu,
Copying programmes with copying list).
TQBS0024
95
DMR-BST&BCT765&760EG_eng.book 96 ページ 2017年3月2日 木曜日 午後6時35分
Remote Control
System Update
Change the remote control code on the main unit
and the remote control if you place other
Panasonic products close together.
• Use “BD 1”, the factory set code, under normal
circumstances.
1 Select the code, then press [OK].
2 While pressing [OK], press and hold the number
button ([1] to [6]) for more than 5 seconds.
3 Press and hold [OK] for more than 5 seconds.
4 Press [OK].
Software Update in Standby
When you set this unit to standby mode,
software (firmware) updates (> 80) are
downloaded automatically at the time you
have specified.
Software Update Now ( Broadcast )
Refer to “Software (Firmware) Update”.
(> 80)
Software Update Now ( Internet )
Clock
Refer to “Software (Firmware) Update”.
(> 80)
If the time is not set correctly, use the settings
listed in the method below.
Software Licence
• Automatic
This unit usually obtains time and date
information from digital broadcasts.
• Time Zone
When the time is not correct, set “Time Zone”.
(GMT ` 6 to r 6)
• Manual Setting
1 Select “Off” of “Automatic”, then press [OK].
2 Select the item you want to change.
3 Change the setting.
4 Press [OK] when you have finished the
settings.
• When the clock is set manually, you cannot perform
playing/recording/PAUSE LIVE TV/REWIND LIVE TV of the
programmes that are copy protected (Retention limit). (> 10)
Information about the software licence is
displayed.
System Information
Display Software (firmware) version and
Wireless Module version (When using wireless
connection only) of this unit.
Initialize
Shipping Condition
All the settings except for some settings
return to the factory preset.
• The timer recording programmes are also cancelled.
• The device password is also initialized.
(> 93)
Default Settings
PIN Entry
You can set/change the PIN for parental control.
1 Enter your 4-digit PIN with the number buttons.
2 Enter the new 4-digit PIN with the number buttons.
• Make a note of PIN in case you forget it.
e.g.,
PIN Entry
Setup
Remember the PIN.
0
0
0
OK
3 Press [OK].
96
TQBS0024
0
All the settings other than the tuning settings,
clock settings, language settings, rating PIN,
remote control code, device password, etc.
return to the factory presets.
DMR-BST&BCT765&760EG_eng.book 97 ページ 2017年3月2日 木曜日 午後6時35分
Troubleshooting guide
Before requesting service, make the following
checks. If the problem still persists, consult
your dealer for instructions.
Updating to the latest software (firmware) may
solve the problem. (> 80)
The followings do not indicate a problem
with this unit:
• Regular disc rotating sounds or HDD rotating
sounds.
• Poor reception due to atmospheric conditions.
• When you switch the unit on or to standby
mode, there may be an unexpected sound.
General operation
The unit does not work.
• Check the connections. (> 11, 12)
• One of the unit’s safety devices may have been
activated.
Reset the unit as follows:
1 Press [Í/I] on the main unit to switch the unit
to standby.
• If the unit does not switch to standby, press
[Í/I] on the main unit for about 3 seconds.
The unit is forcibly switched to standby.
Alternatively, disconnect the AC mains
lead, wait one minute, then reconnect it.
2 Press [Í/I] on the main unit to switch it on. If
the unit still cannot be operated, consult the
dealer.
The remote control does not work.
• The remote control and main unit are using
different codes. Change the code on the remote
control.
“Remote Control ” appears on the right side of
the screen.
(“∑” stands for a number.)
Front panel display
Press and hold [OK] and
the indicated number
button at the same time
for more than 5 seconds.
(> 96, Remote Control)
Startup is slow.
• Startup takes time in the following situations:
- A disc is inserted.
- The clock is not set.
- Immediately after a power failure or the AC
mains lead is connected.
- When a BD-J application is executing.
- When the “Quick Start” is not activated. (> 95)
Displays
“0:00” is flashing on the front panel display.
• Set the clock. (> 96)
The clock does not display on the unit when
switched to standby.
• The clock does not display when “Front Panel
Display” is set to “Automatic”. (> 91)
Cannot eject a disc.
1 Press and hold [Í/I] on the main unit for at
least 3 seconds when it is turned off.
2 Press and hold [OK], the yellow button and the
blue button at the same time for more than
5 seconds.
• “00 RET” is displayed on the front panel
display.
3 Repeatedly press [1] (right) until “06 FTO” is
displayed on the front panel display.
4 Press [OK].
Reference
Reference
TQBS0024
97
DMR-BST&BCT765&760EG_eng.book 98 ページ 2017年3月2日 木曜日 午後6時35分
TV screen and video
Screen size is wrong.
• Adjust the aspect ratio setting on TV.
• Check “Aspect for Recording” before recording
or picture quality change. (> 89)
[BCT765] [BCT760]
TV reception is not displayed.
• Broadcast signals are not output from this unit’s
RF OUT terminal. Select “On” in “RF OUT
( CATV Signal )” or “RF OUT ( Aerial Signal )”.
(> 95)
The black screen appears on the TV.
• This phenomenon may occur, depending on the
TV setting, when “Quick Start” is activated.
Depending on the TV, this phenomenon may be
prevented by reconnecting to a different HDMI
input terminal.
The screen changes automatically.
• If “Screen Saver” is set to “On”, the screen saver
function will be activated when there is no
operation for 5 minutes or more. (> 91)
There is a lot of image lag when playing video.
• Set to “0” all items in the “Noise Reduction”.
(> 53)
• Set “Audio Delay”. (> 91)
The images do not appear on the TV.
The picture is distorted during play, or video
is not played correctly.
• Check the connections. (> 11, 12)
• Check the settings of the connected TV, etc.
• An incorrect resolution is selected in “Video
Format”. (> 91) Reset the setting as follows:
1 While the unit is on, press and hold [OK], the
yellow button and the blue button at the
same time for more than 5 seconds.
• “00 RET” is displayed on the front panel
display.
2 Repeatedly press [1] (right) until “04 PRG”
is displayed on the front panel display.
3 Press and hold [OK] for at least 3 seconds.
Set the item again.
• When Dolby Digital Plus, Dolby TrueHD,
and DTS-HD® audio are not output
properly, select “Yes” in “Default Settings”
and make proper settings. (> 96)
• The unit’s TV System is different from that of the
disc. Change the TV System. (> 91, TV
System)
• The picture may be distorted or a black screen
may appear between scenes recorded with
different aspect ratios.
• Set “Deep Colour Output” (> 92) or “Contents
Type Flag” (> 92) to “Off”.
[BCT765] [BCT760]
• [DVB-T] (Germany only) Check the broadcast
system. This unit does not support DVB-T2.
Reference
3D video is not output correctly.
• 3D video may be output correctly by changing
the following settings:
- “Signal Format” (> 50, 3D settings during
playback)
• Check the settings of the connected TV.
• When a non-3D compatible amplifier/receiver is
connected between this unit and a TV, 3D video
is not output. (> 13)
• When “Audio Output” is set to “Off”, 3D video
may not be output correctly. (> 92)
98
TQBS0024
DMR-BST&BCT765&760EG_eng.book 99 ページ 2017年3月2日 木曜日 午後6時35分
No sound.
Distorted sound.
• Check the connections. (> 11, 12)
• Check the settings of the connected TV, etc.
• Press [AUDIO] to select the audio. (> 27, 49)
• To output audio from a device connected with an
HDMI cable, set “Audio Output” to “On”.
(> 92)
Cannot change audio channel.
• You cannot change the audio channel if “Digital
Audio Output” is set to “Bitstream” (> 90)
Recording, timer recording and
copying
Cannot record.
Cannot copy.
• Some broadcasts are copyright protected.
• You cannot record to the disc by pressing the
[REC ¥] or timer recording.
• The disc is protected. (> 81)
• [DVD-R] [DVD-RW] [+R] [+RW] Since it will copy to
HDD temporarily, copying is not possible if there
is insufficient available capacity on the HDD.
• This unit cannot record/copy NTSC signals to
discs that already have PAL signal recordings.
A part or whole of a recorded programme has
been lost.
If there is a power failure or the AC mains lead is
disconnected from the household mains socket
while recording or editing, the programme may be
lost or the HDD may become unusable. We
cannot offer any guarantee regarding lost
programmes.
Timer recording does not work properly.
• When
is displayed on the screen. (> 38)
• If your CAM requires a PIN for timer recording,
you need to enter PIN in advance. (> 88, PIN
Entry for Decrypt Recording)
Auto Renewal Recording does not work
properly.
• The programme will not be overwritten in the
following cases:
- the programme is protected
- any programme is being played back or copied
- a screen such as Video Menu is displayed
Instead, the programme will be saved as a
separate programme and that will be
overwritten.
An unusually loud sound is coming from the
rotating disc.
• If you want copy to perform more quietly, select
“Normal ( Silent )” in “Disc Speed for Copy”.
(> 89)
The time recorded on the disc and the
available time shown do not add up.
• [DVD-R] [+R] If you record or edit many times, the
remaining capacity is reduced and then
recording or editing may be disabled.
• Available disc space display may be different
from actual.
Encrypted programmes cannot be decrypted.
• Depending on the encrypted service, it may not
be possible to decrypt certain content.
Keyword Recording does not work properly.
• The Keyword Recording function can search the
First 250 channels listed on “All DVB Channels”
or the First 50 channels registered for
“Favourites1”. (> 84, 86)
• The unit may not record a Keyword Recording
programme when part of its broadcast time
overlaps with that of another timer-recording
programme. When this occurs, the Keyword
Recording does not start even after the
timer-recording has finished.
• When “Search Channel” is set to “First 50
Favourites1”, the unit does not search for
programmes unless you register channels to
“Favourites1”.
Reference
Sound
TQBS0024
99
DMR-BST&BCT765&760EG_eng.book 100 ページ 2017年3月2日 木曜日 午後6時35分
Cannot record two programmes
simultaneously.
• When “DVB-via-IP Server” is set to “On”, this
unit uses one tuner. As a result, the maximum
number of programmes that can be
simultaneously recorded with this unit is
reduced by one. Set “DVB-via-IP Server” to
“Off”. (> 73)
Play
Cannot play back.
• The disc is dirty. (> 24)
• The disc is scratched or marked.
• The disc may not be able to play back if it was
not finalised or a Top Menu was not created on
the equipment used for recording.
• Refer to “Screen icons”. (> 43)
• Depending on the encrypted service, it may not
be possible to play back certain programmes if
they have been recorded without being
decrypted.
Audio and video momentarily pause.
• DVD-R DL and +R DL discs have two writable
layers on one side. Video and audio may
momentarily cut out when the unit is switching
layers.
Reference
You have forgotten your rating PIN.
• The rating level returns to the factory preset.
1 While the unit is on, press and hold [OK], the
yellow button and the blue button at the
same time for more than 5 seconds.
• “00 RET” is displayed on the front panel
display.
2 Repeatedly press [1] (right) until “03 VL” is
displayed on the front panel display.
3 Press [OK].
• “INIT” is displayed on the front panel
display.
Image for the Quick View is not smooth.
• Image may not be played back smoothly in case
of high definition contents.
Cannot play the disc on other players.
• Refer to “Play on other players”. (> 24)
100
TQBS0024
Edit
Cannot edit.
• You may not be able to edit on the HDD if there
is no available space. Delete any unwanted
programmes to create empty space. (> 54)
Photo
Photos do not play back normally.
• The images that were edited on the PC, such as
Progressive JPEG, etc., may not play back.
(> 22)
USB
This unit does not recognize the USB device
correctly.
• If inserted during playback the USB device may
not be recognized by this unit.
Disconnect and reconnect the USB device. If it
still does not recognize the connection, switch
the unit to standby mode and turn it on again.
• USB devices connected using a USB extension
cable other than a dedicated one or a USB hub
may not be recognized by this unit.
• Two USB devices cannot be used
simultaneously. If you insert a USB device while
watching TV, the USB device detection screen
is displayed. Use this screen to select the
device you want to use.
TV Guide
The TV Guide information is not displayed
properly.
• Set the clock correctly. (> 96, Clock)
• There was a programme change, or TV Guide
information from a broadcast station was
possibly not correctly transmitted.
• If signal quality is bad, the TV Guide system
may not be able to receive any data.
• It may take time until the TV Guide screen is
displayed correctly. Wait for about a day.
DMR-BST&BCT765&760EG_eng.book 101 ページ 2017年3月2日 木曜日 午後6時35分
Picture regularly breaks up on some
channels.
• Adjust the reception with “Manual Tuning”.
(> 85, 86)
The channel which was once selectable
cannot be selected.
• Reveal the channel on the channel list.
(> 85, 86)
Digital broadcasts cannot be received.
• To receive an encrypted broadcast, a CI module
valid for the broadcast is required.
[BST765] [BST760]
• The dish may not be pointing in the direction of
the satellite. If problem persists consult your
local TV aerial installer.
• When you use only one terminal, you may not
view correctly if you connect the satellite cable
to the LNB IN 2 terminal.
• A wrong single cable version is set. Perform
Easy Setting again. (> 18)
[BCT765] [BCT760]
Major channels and favourite channels are not
displayed on the top part of the channel list.
• [DVB-C] To change channel allocation, restart
Auto Setup in Basic Settings menu and change
channel number allocation selection. (> 85)
• You can change channel number assignment.
(> 85)
[BCT765] [BCT760] [DVB-T]
[BST765] [BST760]
Picture very infrequently breaks up on some
or all channels.
• Electrical atmospheric interference caused by
bad weather may cause pictures to break up
and audio to mute or distort momentarily.
Network
You cannot access this unit from DLNA
compatible equipment on the network.
• Check the network connection and the network
settings. (> 15, 18)
• It may not be possible to connect depending on
the types of the equipment or the status of the
equipment.
When using this unit as a server, video frames
are dropped.
• Change the following settings:
- Conversion Setting for DLNA (> 93)
- Resolution Setting for DLNA (> 94)
You cannot play contents properly from DLNA
compatible equipment on the network.
• There may be some video that cannot be played
back on DLNA compatible equipment
depending on the equipment.
• Following programmes may not be played back:
- A programme with access restriction
- A programme with contents protection (> 10)
- A programme with incompatible format
- An encrypted programme (
)
• Playback via DLNA compatible equipment may
not be performed when this unit is in the
following conditions:
- While playing back a BD-Video
- While simultaneously performing Copy (Keep
Picture Quality) and recording
- While displaying the Basic Settings menu
- While executing functions using a network,
such as Network Service
• If the DLNA compatible equipment is not
capable of outputting HE-AAC audio format,
etc., sound may not be played back.
Reference
Broadcast
TQBS0024
101
DMR-BST&BCT765&760EG_eng.book 102 ページ 2017年3月2日 木曜日 午後6時35分
When using Wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
• Use 802.11n (2.4 GHz or 5 GHz) Wireless
router.
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
connection interruptions or other problems.
• On the “Wireless Settings” screen (> 92), the
continuous lighting of at least four “Reception”
indicators is the target for a stable connection. If
three or fewer indicators are lit or the connection
is being interrupted, change the position or
angle of your Wireless router. If there is no
improvement, connect to a wired network and
perform the “Easy Network Setting” (> 18, 92)
again.
When using this unit’s DVB-via-IP Server
function, the broadcast being watched on the
DVB-via-IP Client device or being recorded
with it is interrupted.
• If you use a network function other than the
DVB-via-IP Server function when “Network
Function Priority” for this unit is set to “Network
Service / Home Network”, the broadcast you are
watching on the DVB-via-IP Client device or
recording with it will be interrupted. Change the
“Network Function Priority” setting for this unit to
“DVB-via-IP Server”. (> 94)
Reset
To return all the settings to the factory preset
Perform “Shipping Condition” or “Default
Settings”. (> 96)
Messages on the front panel display
The following messages or service numbers
appear on the front panel display when something
unusual is detected.
BD 
(“∑” stands for a number.)
The remote control and main unit are using
different codes. Change the code on the remote
control. (> 97)
CAM-UP
CAM is being updated. (> 80)
CONV
The picture quality of the selected programme
stored in the USB HDD is being changed.
Do not disconnect the USB HDD from this unit.
GUIDE
TV Guide data is being downloaded.
NoERAS
You cannot delete items on this disc.
The disc may be damaged.
NoREAD
• The disc is dirty. (> 24) The unit cannot record,
play, or edit.
• The lens cleaner has finished cleaning.
Press [< OPEN/CLOSE] on the main unit to
eject the disc.
NoWRIT
Reference
You cannot write to this disc.
The disc may be damaged. Use a new disc.
102
TQBS0024
DMR-BST&BCT765&760EG_eng.book 103 ページ 2017年3月2日 木曜日 午後6時35分
PLEASE WAIT
U59
• Displayed when the unit is started and is
switched to standby mode.
• There was a power failure or the AC plug was
disconnected while the unit was on. The unit is
carrying out its recovery process. Wait until the
message disappears.
The unit is hot.
The unit switches to standby for safety reasons.
Wait for about 30 minutes until the message
disappears.
Install or place this unit with good ventilation.
PROG FULL
• There are already 32 timer programmes. Delete
unnecessary timer programmes. (> 38)
• You are trying to divide a programme when the
maximum possible number of programmes is
already stored on the media.
REMOVE
The USB device is drawing too much power.
Remove the USB device.
U61
(When a disc is not inserted) A malfunction has
occurred. The unit is trying to restore to the
normal operation. Once the message disappears
you can use the unit again.
If it remains displayed, consult the dealer.
U76
HDMI cannot be output because it is connected to
a model that does not support copyright
protection.
START
U77
Update of the software (firmware) is started.
You cannot operate the unit until the update is
complete. (> 80)
Due to the current disc not having authorised
copyright information, video output is not
performed.
SW-DL
U88
Software (firmware) is downloading.
Download will stop when the unit is turned on, or
the timer recording starts. (> 80)
The media is not supported.
(When a disc is inserted) There was something
unusual detected with the disc or the unit. The
unit is trying to restore to the normal operation.
Once the message disappears you can use the
unit again.
If it remains displayed, consult the dealer.
UPD /
U99
(“∑” stands for a number.)
The unit fails to operate properly. Press [Í/I] on
the main unit to switch the unit to standby mode.
Now press [Í/I] on the main unit again to turn the
unit on.
UNSUPPORT
The software (firmware) is being updated.
You cannot operate the unit until the update is
complete. (> 80)
X HOLD
An error has occurred in the antenna’s power
supply. Check to see if the antenna’s cable core
and braided wire shield are in contact with each
other.
The HOLD function is activated. (> 83)
Reference
U50
TQBS0024
103
DMR-BST&BCT765&760EG_eng.book 104 ページ 2017年3月2日 木曜日 午後6時35分
Specifications
Specifications are subject to change without
notice.
∫ General
Dimensions:
Country:
DVB-C/DVB-T
Germany, Austria, Switzerland
Channel coverage:
430 mm (W)
59 mm (H)
(including the projecting parts)
210 mm (D)
Mass:
Power supply:
∫ TV system
[BCT765] [BCT760]
Tuner System:
Approx. 2.2 kg
AC 220 V to 240 V, 50 Hz
Power consumption:
[BCT765] [BCT760] Approx. 32 W
[BST765] [BST760] Approx. 50 W
Power consumption in networked standby
mode:
“Quick Start” is not activated and “Networked
Standby” is set to “On”
Approx. 1 W
Power consumption in standby mode:
[BCT765] [BCT760]
“Quick Start” is not activated,
“Networked Standby” is set to “Off” and
“RF OUT ( CATV Signal )” or “RF OUT
( Aerial Signal )” is set to “Off”
Approx. 0.2 W
[BST765] [BST760]
“Quick Start” is not activated and “Networked
Standby” is set to “Off”
Approx. 0.2 W
Operating temperature:
Operating humidity range:
5 oC to 40 oC
10 % to 80 % RH
(no condensation)
∫ Internal HDD capacity
500 GB
VHF: 5 - 12
UHF: 21 - 69
CATV:S1 - S20 (M1 - U10) 7 MHz Band
D051 - D073
D113 - D858
[BST765] [BST760]
Tuner System:
DVB-S/DVB-S2
Antenna receive frequency:
950 MHz to 2150 MHz
Input impedance:
Nominal 75 ≠
Demodulation:
QPSK, 8PSK
LNB input:
F shape terminal female,
power supply 13 V/18 V max. 400 mA
DiSEqC:
Version 1.0 or Tone burst A/B,
22 kHz 0.65 Vp-p
∫ Input terminal
AV in (21 pin):
1 pc.
Analogue Video input (PAL/SECAM/NTSC):
1 Vp-p (75 ≠)
Analogue Audio input (L/R):
Full scale: 2.0 Vrms at 1 kHz (> 10 k≠)
∫ Output terminal
Digital Audio out (coaxial):
HDMI out (19 pin type A):
∫ Other terminals
USB Port (Type A):
Reference
104
TQBS0024
1 pc.
USB2.0
2 pcs.
Common Interface slot:
LAN (Ethernet) Port:
1 pc.
2 pcs.
1 pc.
10BASE-T/100BASE-TX
DMR-BST&BCT765&760EG_eng.book 105 ページ 2017年3月2日 木曜日 午後6時35分
Frequency range:
∫ HG, HX, HE, HL, HM modes
IEEE802.11a/b/g/n
2.4 GHz/5 GHz band
Security§:
WPA™/WPA2™
HDD
BD-RE, BD-R
(500 GB)
Single
Dual
Layer
Layer
(25 GB) (50 GB)
HG
78 hours
4 hours 8 hours
HX
117 hours
6 hours 12 hours
HE
176 hours
9 hours 18 hours
HL
235 hours
12 hours 24 hours
HM
341 hours
17 hours 35 hours
30 min.
(Encryption type: TKIP/AES,
Authentication type: PSK)
(64 bit/128 bit)
WEP
§
Recording
Mode
(picture
quality)
This unit supports WPA™ and WPA2™
encryption.
∫ LASER specification
Class 1 LASER Product
Wave length:
405 nm (BDs)
661 nm (DVDs)
783 nm (CDs)
Laser power:
No hazardous radiation is emitted with
the safety protection
∫ XP, SP, LP modes
Recording
Mode
(picture
quality)
Recording modes (picture quality) and
approximate recording times
Depending on the content being recorded, the
recording time may become shorter than
indicated.
∫ DR mode
HDD
BD-RE, BD-R
(500 GB)
Single
Dual
Layer
Layer
(25 GB) (50 GB)
DR (HD
quality)
75 hour
3 hours 7 hours
30 min. 30 min.
DR (SD
quality)
211 hours
10 hours 21 hours
15 min.
Recording
Mode
(picture
quality)
• Recording time of DR mode may vary
depending on the bit rate of broadcasting:
• High Definition (HD) quality: estimated bit rate
is 14 Mbps
• Standard Definition (SD) quality: estimated bit
rate is 5 Mbps
§
HDD
BD-RE, BD-R
(500 GB)
Dual
Single
Layer
Layer
(25 GB) (50 GB)
XP
107 hours
§
§
SP
215 hours
§
§
LP
430 hours
§
§
It is not possible to copy programmes
recorded in XP/SP/LP mode to Blu-ray discs
while maintaining their original picture quality.
DVD-RAM
DVD-R, DVD-R
Recording
DL,
Mode
DVD-RW,
Single- Double+R DL
(picture sided
+R,
sided
quality)
(4.7 GB) (9.4 GB) +RW (8.5 GB)
(4.7 GB)
XP
1 hour
2 hours
1 hour
1 hour
45 min.
SP
2 hours 4 hours 2 hours 3 hours
35 min.
LP
4 hours 8 hours 4 hours 7 hours
10 min.
• Regarding recording time remaining:
This unit records using a VBR (Variable bit rate)
data compression system to vary recorded data
segments to match video data segments which
may cause differences in the displayed amount
of time and space remaining for recording.
TQBS0024
105
Reference
∫ Wireless LAN
Standard compliance:
DMR-BST&BCT765&760EG_eng.book 106 ページ 2017年3月2日 木曜日 午後6時35分
Audio information
The audio output differs depending on which
terminals are connected to the amplifier/receiver,
and the setting on this unit. (> 90, Digital Audio
Output)
• The number of channels listed is the maximum
possible number of output channels when
connected to amplifier/receiver compatible with
the respective audio format.
Terminal
HDMI AV
OUT
DIGITAL
AUDIO
OUT
§1
§2
The maximum possible number of Dolby
sound is 2ch PCM.
When “BD-Video Secondary Audio” is set to
“On”, the audio will be output as Dolby Digital,
DTS Digital SurroundTM or 5.1ch PCM.
The audio output is amplified from 5.1ch or
6.1ch to 7.1ch depending on the DTS, Inc.
specifications.
Reference
§3
Digital Audio Output
Bitstream
PCM§1
BD-Video:
7.1ch PCM§2, 3
Output using
§2
original audio
DVD-Video:
5.1ch PCM
Dolby Digital/
Down-mixed 2ch
DTS Digital
PCM
SurroundTM
106
TQBS0024
Language code list
Abkhazian:
Afar:
Afrikaans:
Albanian:
Amharic:
Arabic:
Armenian:
Assamese:
Aymara:
Azerbaijani:
Bashkir:
Basque:
Bengali; Bangla:
Bhutani:
Bihari:
Breton:
Bulgarian:
Burmese:
Byelorussian:
Cambodian:
Catalan:
Chinese:
Corsican:
Croatian:
Czech:
Danish:
Dutch:
English:
Esperanto:
Estonian:
Faroese:
Fiji:
Finnish:
French:
Frisian:
Galician:
Georgian:
German:
Greek:
Greenlandic:
Guarani:
Gujarati:
Hausa:
Hebrew:
Hindi:
Hungarian:
Icelandic:
Indonesian:
Interlingua:
Irish:
Italian:
Japanese:
Javanese:
Kannada:
Kashmiri:
Kazakh:
Kirghiz:
Korean:
Kurdish:
Laotian:
Latin:
Latvian, Lettish:
6566
6565
6570
8381
6577
6582
7289
6583
6589
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Lingala:
Lithuanian:
Macedonian:
Malagasy:
Malay:
Malayalam:
Maltese:
Maori:
Marathi:
Moldavian:
Mongolian:
Nauru:
Nepali:
Norwegian:
Oriya:
Pashto, Pushto:
Persian:
Polish:
Portuguese:
Punjabi:
Quechua:
Rhaeto-Romance:
Romanian:
Russian:
Samoan:
Sanskrit:
Scots Gaelic:
Serbian:
Serbo-Croatian:
Shona:
Sindhi:
Singhalese:
Slovak:
Slovenian:
Somali:
Spanish:
Sundanese:
Swahili:
Swedish:
Tagalog:
Tajik:
Tamil:
Tatar:
Telugu:
Thai:
Tibetan:
Tigrinya:
Tonga:
Turkish:
Turkmen:
Twi:
Ukrainian:
Urdu:
Uzbek:
Vietnamese:
Volapük:
Welsh:
Wolof:
Xhosa:
Yiddish:
Yoruba:
Zulu:
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8083
7065
8076
8084
8065
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
DMR-BST&BCT765&760EG_eng.book 107 ページ 2017年3月2日 木曜日 午後6時35分
Disclaimer
Personal information handling
To provide functions and services of this unit,
a device ID, device password and usage
history information are stored and managed
securely in an appropriate security
environment of Panasonic.
Please note that usage history and other
information may be collected for purposes
such as improving products and services in
such a way that individuals cannot be
identified.
Indemnity concerning recorded content
Panasonic does not accept any responsibility
for damages directly or indirectly due to any
type of problems that result in loss of
recording or edited content (data), and does
not guarantee any content if recording or
editing does not work properly. Likewise, the
above also applies in a case where any type
of repair is made to the unit (including any
other non-HDD related component).
About data service (Catch Up TV)
• On-screen instructions may not correspond to
the remote control buttons.
• It may take some time to show the data service.
• Some functions of the data service may be
deactivated during recording.
About Network Service
• Some features of websites or content of the
service may not be available.
• If using slow Internet connection, the video may
not be displayed correctly. A high-speed Internet
service with a speed of at least 6 Mbps is
recommended.
• The services through Network Service are
operated by their respective service providers,
and service may be discontinued either
temporarily or permanently without notice.
Therefore, Panasonic will make no warranty for
the content or the continuity of the services.
• A separate subscription is required to watch
Netflix.
About TV Anywhere
• Please note that a regular maintenance or
unexpected trouble may interrupt the service,
and that the service content may be changed or
revoked and operation menu screens may be
changed with or without a prior notice.
• We recommend that you use a high-speed
connection, such as LTE or Wi-Fi.
• TV Anywhere services may be discontinued
temporarily or permanently without notice.
Reference
The recording and playback of content on this
or any other device may require permission
from the owner of the copyright or other such
rights in that content. Panasonic has no
authority to and does not grant you that
permission and explicitly disclaims any right,
ability or intention to obtain such permission
on your behalf. It is your responsibility to
ensure that your use of this or any other
device complies with applicable copyright
legislation in your country. Please refer to that
legislation for more information on the
relevant laws and regulations involved or
contact the owner of the rights in the content
you wish to record or playback.
TQBS0024
107
DMR-BST&BCT765&760EG_eng.book 108 ページ 2017年3月2日 木曜日 午後6時35分
Licenses
“AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/Progressive” are trademarks of Panasonic Corporation and
Sony Corporation.
Copyright 2004-2014 Verance Corporation. CinaviaTM is a Verance Corporation trademark. Protected by U.S. Patent 7,369,677
and worldwide patents issued and pending under license from Verance Corporation. All rights reserved.
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living
Network Alliance.
DVB and the DVB logos are trademarks of the DVB Project.
DiSEqCTM is a trademark of EUTELSAT.
The “CI Plus” Logo is a trademark of CI Plus LLP.
Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing Limited.
DTS, DTS-HD, the Symbol, & DTS and the Symbol together are registered trademarks,
and DTS-HD Master Audio | Essential is a trademark of DTS, Inc.
© DTS, Inc. All Rights Reserved.
“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
This product is licensed under the AVC patent portfolio license for the personal use of a consumer or other uses in which it
does not receive remuneration to (i) encode video in compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC
Video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to
provide AVC Video.
No license is granted or shall be implied for any other use.
Additional information may be obtained from MPEG LA, L.L.C.
See http://www.mpegla.com
This product is licensed under the VC-1 patent portfolio license for the personal and non-commercial use of a consumer to (i)
encode video in compliance with the VC-1 Standard (“VC-1 Video”) and/or (ii) decode VC-1 Video that was encoded by a
consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide
VC-1 video.
No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, L.L.C.
See http://www.mpegla.com
The Wi-Fi CERTIFIEDTM Logo is a certification mark of Wi-Fi Alliance®.
The Wi-Fi Protected SetupTM Logo is a certification mark of Wi-Fi Alliance®.
“Wi-Fi®”, “Miracast®”, and “Wi-Fi Direct®” are registered trademarks of Wi-Fi Alliance®.
“Wi-Fi Protected SetupTM”, “WPATM”, and “WPA2TM” are trademarks of Wi-Fi Alliance®.
Reference
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks
of HDMI Licensing, LLC in the United States and other countries.
108
TQBS0024
DMR-BST&BCT765&760EG_eng.book 109 ページ 2017年3月2日 木曜日 午後6時35分
Java is a registered trademark of Oracle and/or its affiliates.
Windows is a trademark or a registered trademark of Microsoft Corporation in the United States and other countries.
Android is a trademark of Google Inc.
This product incorporates the following software:
(1) the software developed independently by or for Panasonic Corporation,
(2) the software owned by third party and licensed to Panasonic Corporation,
(3) the software licensed under the GNU General Public License, Version 2.0 (GPL V2.0),
(4) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL V2.1), and/or
(5) open source software other than the software licensed under the GPL V2.0 and/or LGPL V2.1.
The software categorized as (3) - (5) are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without
even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Please refer to the detailed
terms and conditions thereof shown in the Basic Settings menu.
At least three (3) years from delivery of this product, Panasonic will give to any third party who contacts us at the contact
information provided below, for a charge no more than our cost of physically performing source code distribution, a complete
machine-readable copy of the corresponding source code covered under GPL V2.0, LGPL V2.1 or the other licenses with the
obligation to do so, as well as the respective copyright notice thereof.
Contact Information: oss-cd-request@gg.jp.panasonic.com
The source code and the copyright notice are also available for free in our website below.
http://panasonic.net/avc/oss/
MS/PlayReady/Final Product Labeling
This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this
technology outside of this product is prohibited without the appropriate license(s) from Microsoft.
MS/PlayReady/End User Notices
Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including
copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or
WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require
Microsoft to revoke the device’s ability to consume PlayReady-protected content.
Revocation should not affect unprotected content or content protected by other content access technologies. Content owners
may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access
content that requires the upgrade.
Vorbis, FLAC, WPA Supplicant
The software licenses are displayed when “Software Licence” in the Basic Settings menu is selected. (> 96)
Restriction on use of unauthorized copied content
This unit adopts the following technology for copyright protection.
Reference
Cinavia Notice
This product uses Cinavia technology to limit the use of unauthorized copies of some
commercially-produced film and videos and their soundtracks. When a prohibited use of an
unauthorized copy is detected, a message will be displayed and playback or copying will be
interrupted. More information about Cinavia technology is provided at the Cinavia Online
Consumer Information Center at http://www.cinavia.com. To request additional information about
Cinavia by mail, send a postcard with your mailing address to:
Cinavia Consumer Information Center, P.O.
Box 86851, San Diego, CA, 92138, USA.
TQBS0024
109
DMR-BST&BCT765&760EG_eng.book 110 ページ 2017年3月2日 木曜日 午後6時35分
Index
E
A
Easy setting . . . . . . . . . . . . . . . . . . . . . . . 16, 17
Entering text . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Audio . . . . . . . . . . . . . . . . . . . . . . . . . 27, 49, 106
Auto Setup . . . . . . . . . . . . . . . . . . 16, 17, 85, 86
AVCHD . . . . . . . . . . . . . . . . . . . . . 42, 46, 66, 78
B
Basic Settings . . . . . . . . . . . . . . . . . . . . . . . . 84
BD-Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
C
CAM (Conditional Access Module) . . . . . 9, 80
Channel information . . . . . . . . . . . . . . . . . . . 26
Channel List . . . . . . . . . . . . . . . . . . . . 28, 85, 86
Chapter . . . . . . . . . . . . . . . . . . . . . . . . 44, 58, 89
Child Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Parental Control . . . . . . . . . . . . . . . . . . . . . . 88
HOLD function . . . . . . . . . . . . . . . . . . . . . . . . 83
CI Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 80
Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Common Interface . . . . . . . . . . . . . . . . . . . 9, 92
Connection
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Connection . . . . . . . . . . . . . . . . . . . . . . . . 11, 12
Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
AVCHD . . . . . . . . . . . . . . . . . . . . . . . . . . 66, 78
D
Reference
Delete
Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71, 89
Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69, 89
Video . . . . . . . . . . . . . . . . . . . . . . . . . 54, 81, 89
Delete BD-Video data . . . . . . . . . . . . . . . . . . 47
Disc
Finalise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Media information . . . . . . . . . . . . . . . . . . . . . 20
Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
DVB-via-IP Server . . . . . . . . . . . . . . . . . . . . . . 94
DVD-Video . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
110
TQBS0024
F
Favourites . . . . . . . . . . . . . . . . . . . . . . . . 84, 86
Finalise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Format
Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
HDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
USB HDD . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
FUNCTION MENU . . . . . . . . . . . . . . . . . . . . . 25
H
HDD
Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Media information . . . . . . . . . . . . . . . . . . . . . 20
Home Networking (DLNA) . . . . . . . . . . . . 74, 93
Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Media Renderer . . . . . . . . . . . . . . . . . . . . . . 76
Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
K
Keyword Recording . . . . . . . . . . . . . . . . . 38, 45
L
Language code list . . . . . . . . . . . . . . . . . . . 106
Lens cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
M
Manual Tuning . . . . . . . . . . . . . . . . . . . . . 85, 86
Media Renderer . . . . . . . . . . . . . . . . . . . . . . . 76
Miracast® . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MKV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
MP4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
N
Network
Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Easy Network Setting . . . . . . . . . . . . . . . 18, 92
Home Networking (DLNA) . . . . . . . . . . . 74, 93
Miracast® . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Network Service . . . . . . . . . . . . . . . . . . . . . . 72
Wi-Fi Direct® . . . . . . . . . . . . . . . . . . . . . . . . . 76
DMR-BST&BCT765&760EG_eng.book 111 ページ 2017年3月2日 木曜日 午後6時35分
P
T
PAUSE LIVE TV . . . . . . . . . . . . . . . . . . . . . . . 29
Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Picture Quality . . . . . . . . . . . . . . . . . 23, 56, 105
PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27, 96
Playback menu . . . . . . . . . . . . . . . . . . . . . . . . 52
Protection
Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Pure Sound Mode . . . . . . . . . . . . . . . . . . . . . 88
Timer recording . . . . . . . . . . . . . . . . . . . . . . . 34
Top Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Create Top Menu . . . . . . . . . . . . . . . . . . . . . 83
Troubleshooting guide . . . . . . . . . . . . . . . . . 97
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Quick Start . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
R
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
From external equipment . . . . . . . . . . . . . . . 78
Timer recording . . . . . . . . . . . . . . . . . . . . . . . 34
Recording mode
(picture quality) . . . . . . . . . . . . . . . . 23, 56, 105
Recording time . . . . . . . . . . . . . . . . . . . . . . . 105
Remote control . . . . . . . . . . . . . . . . . . . . . . . . 8
HOLD function . . . . . . . . . . . . . . . . . . . . . . . . 83
Remote control code . . . . . . . . . . . . . . . . . . . 96
TV operation . . . . . . . . . . . . . . . . . . . . . . . . . 15
Reset . . . . . . . . . . . . . . . . . . . . . . . . 96, 100, 102
REWIND LIVE TV . . . . . . . . . . . . . . . . . . . 29, 88
S
Setting
Auto Setup . . . . . . . . . . . . . . . . . 16, 17, 85, 86
Easy setting . . . . . . . . . . . . . . . . . . . . . . . 16, 17
Slideshow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Software (Firmware) Update . . . . . . . . . . . . . 80
U
USB HDD (External HDD)
Cancellation of all USB HDD Registrations . . . . 89
Disconnection . . . . . . . . . . . . . . . . . . . . . 41, 89
Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Media information . . . . . . . . . . . . . . . . . . 20, 23
Registration . . . . . . . . . . . . . . . . . . . . . . . 41, 89
USB memories
Media information . . . . . . . . . . . . . . . . . . 20, 23
V
Video
AVCHD . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 46
BD-Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
DVD-Video . . . . . . . . . . . . . . . . . . . . . . . . . . 46
MKV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Playback . . . . . . . . . . . . . . . . . . . . . . . . . 42, 46
Playlist created on other equipment . . . . . . . . . 46
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Video Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 42
W
Wi-Fi Direct® . . . . . . . . . . . . . . . . . . . . . . . . . . 76
4K Networking . . . . . . . . . . . . . . . . . . . . . . . . 51
Reference
Q
Tuning
Channel List . . . . . . . . . . . . . . . . . . . . . . 85, 86
Child Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Manual Tuning . . . . . . . . . . . . . . . . . . . . 85, 86
Signal condition . . . . . . . . . . . . . . . . . . . . 86, 87
TV Anywhere . . . . . . . . . . . . . . . . . . . . . . . . . 72
TV Guide
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Timer recording . . . . . . . . . . . . . . . . . . . . . . . 34
TV System . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
TV>IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
TQBS0024
111
DMR-BST&BCT765&760EG_eng.book 112 ページ 2017年3月2日 木曜日 午後6時35分
Disposal of Old Equipment and Batteries
Only for European Union and countries with recycling systems
These symbols on the products, packaging, and/or accompanying documents mean that used electrical and
electronic products and batteries must not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to
applicable collection points in accordance with your national legislation.
By disposing of them correctly, you will help to save valuable resources and prevent any potential negative
effects on human health and the environment.
For more information about collection and recycling, please contact your local municipality.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
Note for the battery symbol (bottom symbol):
This symbol might be used in combination with a chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical involved.
[After 13 June, 2017]
Declaration of Conformity (DoC)
Hereby, “Panasonic Corporation” declares that this product is in
compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
Customers can download a copy of the original DoC to our
R&TTE products from our DoC server:
http://www.doc.panasonic.de
Contact to Authorised Representative: Panasonic Marketing
Europe GmbH,
Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg,
Germany
This product is in compliance with the radio standards of the
following countries.
Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark,
Finland, France, Germany, Greece, Hungary, Ireland, Italy,
Iceland, Liechtenstein, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
United Kingdom, Switzerland
Declaration of Conformity (DoC)
Hereby, “Panasonic Corporation” declares that this product is in
compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU.
Customers can download a copy of the original DoC to our RE
products from our DoC server:
http://www.doc.panasonic.de
Contact to Authorised Representative:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, Germany
5.15 - 5.35 GHz band is restricted to indoor operations only in the
following countries.
Type of wireless
Frequency band
Maximum power
(dBm e.i.r.p.)
WLAN
2412-2472 MHz
5180-5320 MHz
5500-5700 MHz
20 dBm
23 dBm
23 dBm
The WLAN feature of this product shall exclusively be used inside
buildings.
This product on purpose to connect to access point of 2.4 GHz or
5 GHz WLAN.
Manufactured by:
Panasonic Corporation
Kadoma, Osaka, Japan
Importer for Europe: Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany
Panasonic Corporation
Web Site: http://www.panasonic.com
© Panasonic Corporation 2017
EU
p
TQBS0024
F0317MH0