Power cable accessories catalogue Tools and Equipment

Power cable accessories catalogue
Tools and
Equipment
If you need us, just call your
nearest branch or engineer.
We know that out of hours problems
are the worst type for companies to
encounter and that getting help can
be difficult and frustrating.
Jointing Tech offer a 24/7 breakdown service which
may make it possible for you to complete your
installation. With an extensive stock profile and a
knowledgeable team Jointing Tech could offer the
products and solution you need.
Please note that this service may attract call out and delivery charges.
204
Tools and Equipment
Contents
Hand Hydraulic Crimp Tools
Battery Operated Hand Crimpers
Hydraulic Press Hands
Hydraulic Pumps
Battery Operated Hand Cutters
Hydraulic Cutting Tools Crimp Dies
206 207 208 209 210 211 212 Hydraulic Hole Punching Tools
Band-It Tooling
Cable Preparation Tools
Cutting/Preparation Tools
Tool Hire
Pfisterer/Spiking Tool
Safety Equipment
Gas Torch Kits & Accessories
213
214
215
218
220
221
223
224
This ‘mini-catalogue’ focusing on Tools and Equipment is part
of a larger, more comprehensive Power Cable Accessories
Catalogue produced by Jointing Tech.
Please visit our website for more information and/or a copy of
the full catalogue.
www.jointingtech.co.uk
205
Tools & Equipment
Hand Hydraulic Crimp Tools
Hydraulic Hand Crimper 10-400mm2
FEATURES
■■ Self contained, robust and sturdy while remaining lightweight
■■ Features a double speed action with rapid approach and slower more powerful
speed for crimping
■■ 180° rotation for ease of operation and comfort for operator
■■ Built in safety valve will bypass the oil supply when maximum pressure is reached
■■ Accepts ME-C hex dies and MA-C and PA-C nest and indent
■■ Complete with carry case for tool and dies
Part Number
HT131
Die Range
Conductor Size
ME-C
10-400mm2
Hydraulic crimping tools
Hydraulic Hand Crimper 10-150mm2
FEATURES
■■ Self contained, robust and sturdy while remaining lightweight
■■ Features a double speed action with rapid approach and slower more powerful
speed for crimping
■■ 180° rotation for ease of operation and comfort for operator
■■ Built in safety valve will bypass the oil supply when maximum pressure is reached
■■ Accepts ME hex dies and MA and PA nest and indent
■■ Complete with carry case for tool and dies
Part Number
HT45-E
Die Range
Conductor Size
ME
10-150mm2
Hydraulic crimping tools
Hand Hydraulic Hand Crimper 10-240mm2
FEATURES
■■ Self contained, robust and sturdy while remaining lightweight
■■ Features a double speed action with rapid approach and slower more powerful
speed for crimping
■■ 180° rotation for ease of operation and comfort for operator
■■ Built in safety valve will bypass the oil supply when maximum pressure is reached
■■ Accepts ME-50 hex dies and MA-50 and PA-50 nest and indent
■■ Complete with carry case for tool and dies
Part Number
HT51
206
www.jointingtech.co.uk
Die Range
Conductor Size
ME-50
10-240mm2
Hydraulic crimping tools
Battery Operated Hand Crimpers
Tools & Equipment
Hydraulic Battery Crimper 10-240mm2
FEATURES
■■ B500 is the first of a new generation of hand-held cordless tools heralding a
significantly advantageous evolution from current models
■■ Equipped with Li-lon 18V 4 Ah battery offering greater capacity than the previous
14.4V Ah version
■■ Suitable for crimping conductors up to and including 240mm2
■■ Complete with LED light for darker working areas
■■ Faster compression and greater crimping force result from new two-speed
hydraulic system
■■ Fitted with a maximum pressure sensor for enhanced precision and repeatability
■■ New OLED display provides essential real time data including force generated,
battery life and number of work cycles left before maintenance
■■ 180° head rotation
■■ Consists of 2 x batteries, battery charger, shoulder strap and carry case
Part Number
B500
Die Range
Conductor Size
ME-50
10-240mm2
Hydraulic Battery Crimper 10-400mm2
FEATURES
■■ Born of the renowned B135-C crimping tool, first into the market is the 132kN
B1350-CE, suitable for a wide range of connectors upton 400mm2 using the die
sets common to the Cembre 130kN tooling range
■■ Equipped with Li-lon 18V 4 Ah battery offering greater capacity than the previous
14.4V Ah version
■■ Faster compression and greater crimping force result from new two-speed
hydraulic system
■■ Fitted with a maximum pressure sensor for enhanced precision and repeatability
■■ New OLED display provides essential real time data including force generated,
battery life and number of work cycles left before maintenance
■■ Complete with LED light for darker working areas
■■ 180° head rotation
■■ Consists of 2 x batteries, battery charger, shoulder strap and carry case
Part Number
B1350-CE
Die Range
Conductor Size
ME-C
10-400mm2
www.jointingtech.co.uk
207
Tools & Equipment
Hydraulic Press Heads
Hydraulic Press Head 10-400mm2
FEATURES
■■ Hydraulic press head complete with quick release coupling to connect head to
pump with max operating pressure of 700 bar
■■ Lightweight at only 3.8kg
■■ Compatible with a range of dies that accept Cu/Ali lugs/splices and C tap
connectors at LV and HV voltages
■■ Head compatible with both PO7000/B70-P24 and EP10 electric pump
Part Number
RHC131
Die Range
Conductor Size
ME-C
10-400mm2
RHC 131 type hydraulic
press head for 10-400mm2
cables
Hydraulic Press Head 400-630mm2
FEATURES
■■ Hydraulic press head complete with quick release coupling to connect head to
pump with max operating pressure of 700 bar
■■ Lightweight at only 5.5kg
■■ Adaptor type AU230-130D is available as an optional extra enabling the head to
utilise smaller ME-C, MA-C and PA-C dies
■■ Head compatible with both PO7000/B70-P24 and EP10 electric pump
Part Number
ECW-H3D
Die Range
Conductor Size
ME-3D
400-630mm2
ECW-H3D type hydraulic
press head for
400-630mm2 cables
Hydraulic Press Head 400-1000mm2
FEATURES
■■ Hydraulic press head complete with quick release coupling to connect head to
pump with max operating pressure of 700 bar
■■ Weight is 18kg
■■ Complete with two handles on either side of the head for ease of use
■■ Adaptor type AU520-130C is available as an optional extra enabling the head to
utilise smaller ME-C, MA-C and PA-C dies
■■ Head compatible with both PO7000/B70-P24 and EP10 electric pump
■■ Male coupling is side mounted which enables head to stand on end if needed
Part Number
RHU-520
208
www.jointingtech.co.uk
Die Range
Conductor Size
ME-520
400-1000mm2
RHU-520 type hydraulic
press head for
400-1000mm2 cables
Hydraulic Pumps
Tools & Equipment
Electric Pump
FEATURES
■■ Electrically driven hydraulic pump, powered by 110V/50-60hz single phase electric
motor
■■ Piston type high pressure pump supercharged by a low pressure pump
■■ Extremely durable yet lightweight and operates under low-line voltage conditions
■■ Comes complete with a remote hand controller with 10 foot cord
■■ Operates up to 10000PSI
Part Number
Foot and electric hydraulic
pumps
EP10 ELECTRIC PUMP
Description
110 Volt
Foot Pump
FEATURES
■■ Foot operated hydraulic pump developing a maximum of 700 bar of pressure
■■ Mounted on a solid shaped stand giving the pump stability during operation
■■ Complete with a 3m high pressure hose with female quick release coupler
■■ Lightweight at only 9.8kg
■■ Complete in plastic hard wearing carry case
PO-7000 hydraulic pump
Part Number
Description
PO 7000
Foot Pump
Electro-Hydraulic Pump (battery)
FEATURES
■■ Operating at 24v dc by battery for independent use and developing 700 bar
pressure
■■ Complete with 3m hose and quick couplers, remote control, shoulder strap,
external battery charger and canvas holdall for carrying accessories
■■ Also available in an insulated version - contact our sales team for more info
Part Number
B70M-P24 lightweight
pump
B70M-P24
TRS-B70
SPARE BATTERY
Description
Hydraulic Electric Pump
Canvas Rucksack For B70m-P24
For The B70m-P24
www.jointingtech.co.uk
209
Tools & Equipment
Battery Operated Hand Cutters
Hydraulic Battery Cutter 50mm Max
FEATURES
■■ B-TC500E is the next generation of Cembre cordless hydraulic tools and features
significant advantages over current models
■■ Has a NEW Li-Ion 18V 4 Ah battery offering higher capacity than 14.4 V 3 Ah
■■ High strength steel blades are heat treated to ensure long lifespan
■■ Suitable for copper and aluminium cable having a max diameter of 50mm
■■ The head can rotate 180 degree to enable the operator to work in the most
comfortable position
■■ B-TC500E comes with a fitted LED light for a safer working area
■■ Maximum pressure sensor and pressure relief valve assures precision and
repeatability
■■ The new generation of tooling boasts a OLED display which provides real time
information including crimping force, battery life, life cycle with service intervals.
■■ Comes complete with shoulder strap, spare battery, charger and carry case
Part Number
Maximum Cutting Diameter
Weight
50mm
5.8kg
B-TC500E
Hydraulic Battery Cutter 65mm Max
FEATURES
■■ B-TC650-SCE is the next generation of Cembre cordless hydraulic tools with
significant advantages over current models
■■ Features NEW Li-Ion 18V 4 Ah battery offering higher capacity than 14.4 V 3 Ah
■■ High strength steel blades are heat treated to ensure long lifespan
■■ Suitable for copper and aluminium cable having a max diameter of 65mm
■■ The head can rotate 180 degree to enable the operator to work in the most
comfortable position
■■ B-TC650-SCE comes with a fitted LED light for a safer working area
■■ A maximum pressure sensor and pressure relief valve assures precision and
repeatability
■■ The new generation of tooling boasts an OLED display which provides real time
information including crimping force, battery life, life cycle with service intervals
■■ Comes complete with shoulder strap, spare battery, charger and carry case
Part Number
Maximum Cutting Diameter
Weight
65mm
6.4kg
B-TC650E
210
www.jointingtech.co.uk
Hydraulic Cutting Tools
Tools & Equipment
Hand Held Cutting Tools
FEATURES
■■ Hydraulic hand tools designed to cut both copper and aluminium cables
■■ Fast advance speed for rapid approach of the blades to the cable and a slower
more
powerful speed for cutting
■■ Blades are manufactured from high strength special steel, heat treated for longer
service life
■■ Heads can be easily opened to allow cutting of running cables
■■ HT-TC051 can rotate the head 90° with the HT-TC0851 being able to complete
180°
of rotation
■■ Both tools have a bypass oil safety valve for when tools are at maximum pressure
■■ HT-TC051 comes complete in a carry bag with the HT-TH0851 coming in a carry
case
Part Number
Maximum Cutting Diameter
Weight
HT-TC026
25mm
3.2kg
HT-TC051
50mm
4.4kg
Part Number
HT-TC0851
Maximum Cutting Diameter
Weight
85mm
6.6kg
Hand Held Cutting Tools
FEATURES
■■ Hydraulic cutting heads designed to cut both copper and aluminium cables
■■ Fast advance speed for rapid approach of the blades to the cable and a slower
more
powerful speed for cutting
■■ Blades are manufactured from high strength special steel, heat treated for longer
service life
■■ Heads can be easily opened to allow cutting of running cables
■■ Working pressure of all cutting heads are 700Bar Max
■■ All complete with a quick release male coupling for connection to hydraulic pump
■■ All complete with a handle which allows the most comfortable positioning of the
head onto the cable
Part Number
Maximum Cutting Diameter
Weight
TC096
95mm
7.9kg
TC085
85mm
4.9kg
Part Number
TC120
Maximum Cutting Diameter
Weight
120mm
9.5kg
www.jointingtech.co.uk
211
Tools & Equipment
Crimp Dies
Cembre Dies
ORDERING
■■ To ensure the correct dies are selected please contact our sales team
Tool Type
Part Number
Conductor size
range mm2
Conductor
Number of dies
in range
Die Type
MA-C
10-300
Copper
12
Nest
LV Dies For “G Type 131 Heads”
PA-C
10-300
Copper
4
Indentor
LV Dies For “G Type 131 Heads”
ME-C
10-400
Copper
13
Hexagonal
MA-3D
400-630
Copper
3
Nest
PA-3D
400-630
Copper
2
Indentor
ME-3D
400-630
Copper
3
Hexagonal
Adaptor Die For “G Type 131 Head”
LV Dies For “G Type 131 Heads”
LV Dies For “Ecw-3D Head”
AU230-130D
LV Dies For “Rhu-520 Head”
Copper
1
MA-520
400-1000
Copper
5
Nest
PA-520
400-1000
Copper
2
Indentor
MK-520
400-1000
Copper
5
Hexagonal
Copper
1
Adaptor Die For “G Type 131 Head”
10-400
Copper
13
Hexagonal
Hexagonal
AU520-130C
HV Dies For “G Type 131
Heads”
ME-C
HV Dies For “Ecw-3D Head”
ME-3D
400-630
Copper
3
HV Dies For “Rhu-520 Head”
MK-520
400-1000
Copper
5
Cembre LV & HV Copper Terminals
ConducTerminals
tor
Size
Cembre
LV & HV Copper Terminals
(mm2)
Stranded
Cembre LV
Cembre LV
Cembre
Lugs
Splices
HV Lugs
0.25-2.5
HT45E /
B35-45
HT50
/ B51 /
RH50
HT131 /
B135
ECW-H3D
RHU-520
A03-M-A06-M
L03-M-L06-M
4-6
A1-M
L1-M
ME1
ME1-50
10
A2-M
L2-M
ME2
ME2-50
Me2-c
AU230-130D + ME2-C
Au520-130C + Me2-C
16
A3-M
L3-M
2A3-M
ME3
ME3-50
Me3-c
AU230-130D + ME3-C
Au520-130C + Me3-C
25
A5-M
L5-M
2A5-M
ME5
ME5-50
Me5-c
AU230-130D + ME5-C
Au520-130C + Me5-C
35
A7-M
L7-M
2A7-M
ME7
ME7-50
Me7-c
AU230-130D + ME7-C
Au520-130C + Me7-C
50
A10-M
L10-M
2A10-M
ME10
ME10-50
Me10-c
AU230-130D + ME10-C
Au520-130C + Me10-C
70
A14-M
L14-M
2A14-M
ME14
ME14-50
Me14-c
AU230-130D + ME14-C
Au520-130C + Me14-C
95
A19-M
L19-M
2A19-M
ME19
ME19-50
Me19-c
AU230-130D + ME19-C
Au520-130C + Me19-C
120
A24-M
L24-M
2A24-M
ME24
ME24-50
Me24-c
AU230-130D + ME24-C
Au520-130C + Me24-C
150
A30-M
L30-M
2A30-M
ME30
ME30-50
Me30-c
AU230-130D + ME30-C
Au520-130C + Me30-C
185
A37-M
L37-M
2A37-M
ME37-50
Me37-c
AU230-130D + ME37-C
Au520-130C + Me37-C
240
A48-M
L48-M
2A48-M
ME48-50
Me48-c
AU230-130D + ME48-C
Au520-130C + Me48-C
300
A60-M
L60-M
2A60-M
Me60-c
AU230-130D + ME60-C
Au520-130C + Me60-C
400
A80-M
L80-M
2A80-M
Me80-c
ME80-3D
Me80-520
500
A100-M
L100-M
2A100-M
ME100-3D
Me100-520
630
A120-M
L120-M
2A120-M
ME120-3D
Me120-520
800
A160-M
L160-M
2A160-M
Me160-520
1000
A200-M
L200-M
2A200-M
Me200-520
ORDERING
■■ Aluminium dies also available
■■ Circumferential and Hex DIN dies also available
212
Tool
www.jointingtech.co.uk
Hydraulic Hole Punching Tools
Tools & Equipment
Cordless Hydraulic Puller-Type Hole Punching Tool B-FL750E
FEATURES
■■ Cordless hydraulic tool, for hole punching stainless steel, sort metal, fibreglass and
plastic sheet up to 3.5mm thick
■■ The balanced punching head pivots 180° through a full 360° rotation
■■ OLED display provides essential real time information including crimp force,
battery life and service schedule
■■ Tool comes complete with shoulder strap, spare battery, charger, TD-11 & TD-19
puller, spiral bit and carrying case
Part Number
B-FL750E
Hole Punch Size
Weight
15.5mm-120mm2
5.1kg
HT-FL75
FEATURES
■■ Hand operated hydraulic tool designed for hole punching stainless steel, soft
metal, fibreglass and plastic sheet upto 3.5mm thick
■■ Compact, lightweight and easy to handle
■■ Tool comes complete with plastic carry case, TD11 and TD19 pullers and an
11.5mm spiral bit
Part Number
HT-FL75
Hole Punch Size
Weight
15.5mm-120mm2
3.7kg
RH-FL75
FEATURES
■■ Hydraulic head designed for hole punching stainless steel, soft metal, fibreglass
and plastic sheet up to 3.5mm thick
■■ Compact, lightweight and easy to handle
■■ Quick release coupler for connection to hydraulic pump
■■ Tools comes complete with TD11 and TD19 pullers and an 11.4mm spiral bit
Part Number
RH-FL75
Hole Punch Size
Weight
15.5mm-120mm2
1.9kg
For more details on hole punch dies please contact your nearest branch.
www.jointingtech.co.uk
213
Tools & Equipment
Cable Preparation Tools
Cable Stripping Tools
FEATURES
■■ Tools for cable stripping low and medium voltage cables
Part Number
Description
CERAMIC KNIFE
Utility knife with non-conductive ceramic blade
EXRM-0607
Wooden Handled Cable Stripping Knife
EXRM-0947
Hook Knife For Outersheath Stripping
120-CS
Insulated Hack Knife
EXRM-1004
Paper Cable Insulation Stripping Pliers
CABLE KNIFE
Utility knife complete with Stanley blade and cover
A selection of cable
stripping tools
Universal Plastic Sheath Stripper
FEATURES
■■ Single hand operation
■■ Complete with two depth fittings
Part Number
KMS
KMS BLADE
Outer sheath removal tool
Diameter Tape
FEATURES
■■ Used to confirm the diameter for cables and cable insulations
214
Part Number
Description
IT-1000-010
Jointer’s diamater measuring tape
www.jointingtech.co.uk
Diameter tape
Cutting/Preparation Tools
Tools & Equipment
Hand Cutting Tools
FEATURES
■■ Long handles for easy cutting
■■ Used for unarmoured cables and cutting of conductors and screen wires
■■ Please refer to hydraulic section for cutting of armoured cables
Hand tools for cable core
cutting upto 500mm2
Part Number
Conductor Size
5116660250
6-250mm2
5116660500
6-500mm2
Roller Chain Tongs
FEATURES
■■ For the removal of the steel wire or aluminium wire armour of power cables
■■ Adjustable to suit armour diameters up to 76mm
Part Number
Over Armour Diameter
RCT155
Armour wire removal tool
20 - 76mm
RCT SPARE CHAIN
-
RC52 Ratchet Cutting Tool
FEATURES
■■ Designed for use on copper and aluminium conductors
■■ High quality steel ratchet mechanism for optimised mechanical advantage
■■ Moveable blades can be easily released
■■ Not for use on armoured cables
■■ See hydraulic section for cutting of armoured cables
Ratchet cutting tools for
cables
Part Number
Cutting Range
RC-52
Up to 52mm
KT-4
Up to 52mm
HP3 Ratchet Crimp Tool
FEATURES
■■ Compact, easy to use manual tool
■■ Treated steel crimp jaws with high mechanical properties
■■ Factory set ratchet for crimping control (automatic handle opening upon
completion of crimping operation)
■■ Emergency release lever which, if necessary, opens the crimp jaws before their
complete closure
HP3 Ratchet Crimp Tool
■■ Ergonomically designed non-slip moulded plastic grips
Part Number
HP3
Size
0.5 - 6mm
www.jointingtech.co.uk
215
Tools & Equipment
Cable Preparation Tools
Outer Sheath Strippers
FEATURES
■■ Can also be used for removal of primary insulation and lead alloy sheaths
■■ For circular and longitudinal cuts
■■ Fully insulated stripper available (PG3-EC)
Part Number
Sheath Diameter
Part Number
Sheath Diameter
PG2-HTA
21-35mm
PG4-HTA
47-75mm
PG3-HTA
26-51mm
PG5-HTB
65-95mm
PG3-EC
26-51mm
PG6-HTB
80-125mm
Outer sheath removal tool
Peelable Semi-Conductive Screen Stripper
FEATURES
■■ The LHM tools allow simple and easy removal of peelable semi- conductor
■■ The tool works by creating a precise spiral incision with an offset circular blade on
the semi-conductor which allows it to be neatly unwrapped
■■ The remaining length of exposed semi-con can be set depending on the tool used
Part Number
Diameter over Screen
LHM1R30/45
14-40mm
LHM2R30/60
38-60mm
For use on easy peel cable
screens
Pre-set Scoring Tool
FEATURES
■■ Two different tools for use at either 11 or 33kV
■■ Pre-set blade depth allows easy scoring and screen removal
Part Number
Diameter
Use with
TT2352/1
0.4mm
For 11kV
TT2352/2
0.6mm
For 33kV
For use on easy peel cable
conductive screens
Bonded Screen Removal Tool
FEATURES
■■ This tool enables the user to remove and chamfer the bonded semiconductor in a
clean and swift manner without the use of silicon
■■ The blade is adjustable from 0.4mm to 1.4mm with “clicking knob” (0.1mm for
each click)
■■ The angle of the chamfer is 8°
■■ Tool will accommodate insulation
Part Number
CWB18-60
216
www.jointingtech.co.uk
Diameter over Screen
18-60mm
For removal and chamfer
of bonded screen
Tools & Equipment
Cable Preparation Tools
Bonded Screen Removal Tool
FEATURES
■■ Removes bonded semi conductive screens from XLPE cables
■■ Depth adjustment from 0-1.5mm
■■ Application range over semi conductive screen is between 0-52mm O/D
■■ Stripping can be done starting at any position on the cable
■■ Advised to be used on Vulcanized, extruded and bonded semi conductive screens
Part Number
Designed to remove the
cable’s bonded screen
BSR700
BSR700 SPARE BLADE
Insulation Diameter
Depth of Cut
10-52mm
0-1.5mm
-
-
Adjustable Insulation Tapering Tool
FEATURES
■■ LHA tool tapers the end of XLPE insulation and allows a better penetration of premoulded joints
Part Number
To make a Chamfer
LHA
14 - 40mm
LHA2
38-60mm
LHA3
60-80mm
Provides a chamfered
finish at the screen
removal points
Screen and Insulation Removal Tool HVIA Stripper 35/90
FEATURES
■■ Stripping tool for extruded and bonded cable screens and primary insulation for
cable diameter from 35-90mm or 75-150mm
■■ For use on medium and high voltage cables
■■ Adjustable to cable diameter via the red twist handle
■■ Tool is supplied with blades packed separately in the case
■■ Advised to apply a thin layer of silicone lubricant to screen for easy movement
Part Number
Cable Diameter
HVIA-STRIPPER 35-90
35-90mm
HVIA-STRIPPER 75-150
75-150mm
www.jointingtech.co.uk
217
Tools & Equipment
Hire
Toolout Hire
FEATURES
■■ Jointing Technologies have the largest hire fleet of crimping and cutting tools in the country
■■ All available on a next working day delivery (on orders placed before 4pm)
■■ All tools are calibrated and checked prior to dispatch to ensure they are in full working order
Hydraulic Crimping
FEATURES
■■ Also available in hand tool version
■■ Dies available 10-1000mm2 copper/aluminium LV/HV
■■ Please state cable type and size
Battery Crimping
FEATURES
■■ Dies available 10-1000mm2 copper/aluminium LV/HV
■■ Please state cable type and size
Hydraulic Crimp & Cut
FEATURES
■■ Dies available 10-1000mm2 copper/aluminium LV/HV
■■ TC120 cutting head - max cutting diameter of 120mm
■■ Please state cable type and size
218
www.jointingtech.co.uk
Hydraulic Cutting
FEATURES
■■ Also available in hand tool version
■■ TC120 cutting head - max cutting diameter of 120mm
■■ HT-TC085 cutting hand tool - max cutting diameter of 85mm
Battery Cutting
FEATURES
■■ TC120 cutting head - max cutting diameter of 120mm
Battery Crimp & Cut
FEATURES
■■ Dies available 10-1000mm2 copper/aluminium LV/HV
■■ TC120 cutting head - max cutting diameter of 120mm
■■ Please state cable type and size
Hire
Tools & Equipment
Toolout Hire
FEATURES
■■ Long term hire deals available - Please contact our sales department for further information
■■ All hire prices include die sets - to ensure the correct sizes are supplied please advise at time of order
■■ Dies are available for copper and aluminium cables, C-taps and elbow contacts
Cable Spiking Tool
FEATURES
■■ Used for
spiking power
cables prior
to jointing,
terminating or
repair
Cable Jack & Spindle
FEATURES
■■ Both 3 or 6 ton versions available
■■ Due to size and weight additional carriage may apply
on this item. Contact your local sales office for more
information
Pfisterer Tool
FEATURES
■■ Standard size
1, 2, 3 tool
■■ Larger sizes
4-5S and 6
also available
on request
TDUX Duct Seal Inflation Tool
FEATURES
■■ Complete with pressure gauge to ensure correct
installation
■■ Please order gas separately - see page 200
Tool Repair & Calibration
FEATURES
■■ Cembre and Prysmian approved repairer
■■ Calibration certificates supplied
■■ Estimates provided prior to works
■■ Reconditioned tools available
■■ All tools must be calibrated after each hire to comply with
BS7671 (UK Wiring Regulations)
www.jointingtech.co.uk
219
Tools & Equipment
Pfisterer/Spiking Tool
Pfisterer Tool
FEATURES
■■ Tools comprises of the following
- Carry case
- Compression head size 1,2,3 including pull off head
- Impact device 1,2,3 for preassemble of connector contacts
- Hydraulic 60816 Compression tool
- Chain for suspension of assembly lever and hole bar
- T-handle screw driver SW6
- Assembly lever for pressing and releasing the bell housing
■■ For installation of Connex connectors size 1, 2 and 3. For sizes 4, 5 and 6 - please
contact our sales team
Part Number
PFISTERER TOOL
Description
For size 1, 2, 3
Connex installation tool
Spiking Tool
FEATURES
■■ The Bowthorpe Cable Spiker is intended to prove that a selected cable, previously
disconnected, is in fact dead before site work commences
■■ Silent in operation and of a robust and rigid construction
■■ The kit comprises a hand operated hydraulic pump connected by a fully insulated
hose to a hydraulic ram which carries the diamond shaped chisel cable spike
■■ All component parts are supplied in a stout wooden carrying case
■■ Ram is mounted on a shaped tubular steel body which is located and held around
the cable up to 102mm diameter
■■ An independent earth cable 6m x 50mm2 with suitable connecting lugs are also
supplied
■■ WARNING:
This spiker must not be used without an earth cable connected and properly
earthed as failure to do so could have serious consequences for the operator in
the event of a live cable being pierced
Part Number
SG1
220
www.jointingtech.co.uk
Description
Up to 102mm cable diameter
Cable spiker kit
Tools & Equipment
Safety Equipment
Rubber Switchgear Matting
FEATURES
■■ Maximum coil size is 10 metres
■■ Can be cut to specific length - price always rounded up to next complete metre
Part Number
Thickness
Tested to
Working Voltage
LVRM6
6mm
15,000 volts
450 volts
LVRM9
9mm
15,000 volts
650 volts
HVRM
4mm
50,000 volts
11,000 volts
Insulating Gloves
FEATURES
■■ Fully insulating gloves each test stamped for working voltages ranging from 500V36000V
■■ Manufactured to EN60903
■■ Available in four sizes
■■ Gloves are tested by inflation and visual inspection carried out by a pneumatic
glove tester
Part Number
Voltage Class
Size
0583
00
8, 9, 10, 11
0584
0
8, 9, 10, 11
0585
1
8, 9, 10, 11
0586
2
8, 9, 10, 11
0587
3
8, 9, 10, 11
0588
4
8, 9, 10, 11
Leather Outer Gloves
FEATURES
■■ Fully insulated gloves each test stamped for working voltages ranging from 500V
to 36000V
■■ Worn over the insulating gloves to protect against mechanical hazards and
electrical arcing
■■ Available in sizes 8-12
Part Number
058L
Size
8 - 12
www.jointingtech.co.uk
221
Tools & Equipment
Safety Equipment
Dielectric Boots
FEATURES
■■ Dielectric boots in various sizes from 6 to 13
■■ Certified protection against electric shock
■■ Oil and chemical resistant sole
■■ Conforms to EN345-1.SB and EN50321 Class 0
■■ Overall boot tested to 20kV
Part Number
Size
Part Number
Size
871906/40
6
871909/44
10
871907/41
7
871911/45
11
817908/42
8
871911/46
12
871909/43
9
871911/47
13
Dielectric Boots
Safety Hook
FEATURES
■■ Safety rescue hook used for retrieval of victims of electric shock
■■ Rated for systems up to 60kV
■■ Safeguards the life of the first aider
■■ Should be placed in a prominent and easily accessible position near to the live site
Safety Hooks
Part Number
Voltage Class
Size (Length)
509049
Up to 60kV
1950mm
509048
Up to 1kV
1000mm
Safety Rescue Hook Station
FEATURES
■■ The hook station offer a safe storage place for the rescue hook
■■ Detailed on the hook station are basic life support checks and techniques for the
first aider to administer prior to paramedics arriving
■■ Hook station and hook should be in a prominent and easily accessible position
near to the live site
■■ Hook not included
Part Number
222
Voltage Class
Size (Length)
509050
1kV
580 x 450
509051
60kV
580 x 805
www.jointingtech.co.uk
Safety Rescue Hook
Station
ols
Tools & Equipment
Gas Torch Kits & Accessories
Gas Torch Kit complete with Burner, Hose and Handle
FEATURES
■■ Kit designed specifically for jointers
■■ Two different burners for the complete range of heat shrinking applications
■■ Please note all items, including cut-to-length hose, can be bought separately
Gas torch kit
Part Number
Kit Contents
TOL/GTK
Complete safety handle, soft flame burner, 4m hose with all end fittings
attached, carry case and regulator
Handle for Gas Torches
FEATURES
■■ Piezo igniton with instant trigger on/off function
■■ Bayonet fitting for burners
■■ Valve for precise flame setting
■■ Hose connection BSP 3⁄8” LH
Part Number
Gas torch handle
Working Pressure Bar
H3366
1.5-4
Hot Air and Soft Flame Burners
FEATURES
■■ Hot-air burners with powerful windproof hot-air streams for heat shrinking
■■ 3349 ideal for shrinking in confined spaces and fibre optic closures
■■ 3359 is an extra small hot-air burner incorporating a heat reflector, ideal for signal
systems, traffic lights, alarm systems, marine applications, automobiles and other
vehicle repairs
■■ Work pressure - 2 bar
■■ Soft flame design ideal for cable work and other heat shrinking applications
■■ Soft flame burners with sweeping, powerful yellow and blue soot-free windproof
flames
Hot air burners
Part Number
Type
Burner Diameter
Type
Burner Diameter
HAB32-15 (3349)
Hot Air Burner
32x15mm
SFB38 (334191)
Soft Flame Burner
38mm
HAB 25 (3359)
Hot Air Burner
25mm
SFB50 (334891)
Soft Flame Burner
50mm
Soft Flame Burner
28mm
SFB28 (334791)
Part Number
Regulator for Gas Torches
FEATURES
■■ Suitable for use with the H3366 handle
■■ Hose connection bsp 3⁄8” lh
Gas torch regulator
Part Number
3091-21
Working Pressure Bar
2
www.jointingtech.co.uk
223
Tools & Equipment
Band-It Tooling
Light and Heavy Duty Applications
FEATURES
■■ C001 tool is for light and heavy duty band and buckle products
■■ Tensions up to 2400lbs - for use on band up to 3⁄4”
■■ C007 tool is for light duty coated or uncoated band and bandfast clamps
■■ Hand ratchet mechanism
Part Number
C001 TOOL
CO75 TOOL - BANTAM
Cable Tie Tensioning Tool
FEATURES
■■ AE200 tensions all re-useable Band-it ties
■■ AE201 hook tool tensions all re-usable and multilock ties
Part Number
AE200 TOOL
AE201 TOOL
Hand tension tool
Cable Tie Tensioner with Auto Cut Mechanism
FEATURES
■■ M503 tool - adjustable/variable tension prevents over tensioning of Multi-lok ties
■■ Can be used on both coated and uncoated Multi-lok ties
■■ K502 tool - adjustable/variable tension prevents over tensioning of Ball-lok ties
■■ Can be used on both coated and uncoated Ball-lok ties
■■ KE922 manual tool for use with multi-lok and Ball-lok ties
■■ Automatic cut off
■■ Weight 0.43kg
Part Number
M503 TOOL
K502 TOOL
For use with Band-it
coated and uncoated
Multi-lock ties
Cable Tie Tensioner and Cutter
FEATURES
■■ Variable/adjustable tension prevents over tensioning of ties
■■ Can be used on both coated and uncoated Ball-Lok ties
■■ Can be used on both coated and uncoated ties
Part Number
KE9229
224
www.jointingtech.co.uk
For use with Band-it
Multi-lok and Ball-lok ties
Power Consumables
Jointing Tech supply a wide range of
power consumable items that allow you
to complete your installation.
These include:
•Batteries
•Fixings
•General Consumables
•Lubricants
•Cleaners
•Pollution Control
•Tapes
•Electrical Ancillaries
Whether it be batteries for your test equipment,
insulation tape for cable harnessing or cleaning
lubricants for contact or switchgear, Jointing Tech
are the single solution for all your electrical ancillary
requirements.
www.jointingtech.co.uk/power-consumables
154
Jointing Tech Branches:
Woking
Bristol
Norton Canes
Unit 19
Woking Business Park
Albert Drive
Woking
GU21 5JY
The Alpha Centre
Armstrong Way
Great Western Business Park
Yate
Bristol
BS37 5NG
Unit 15-16
Bellsize Close
Norton Canes
Staffordshire
WS11 9TQ
Tel: 01483 747747
Tel: 01454 322555
Tel: 01543 450555
Quality and Industry Accreditation
Jointing Tech Group:
Langley Engineering Ltd
Jointing Tech –
Trace Heating Department
16 The Markham Centre
Theale
Reading
Berkshire
RG7 4PE
Unit 4 Eversley Way
Thorpe Industrial Estate
Egham
Surrey
TW20 8RG
Tel: 0118 930 5990
Tel: 01784 279005
Jointing Technologies is part of Toolout Limited.
© Toolout Limited. All rights reserved.
Registered in England. Company Number 2281668
www.jointingtech.co.uk