8” C/C Backsplash Faucet Product Installation Guide Replacement

Replacement Parts for Backsplash Faucets
fisher manufacturing company
8” C/C Backsplash Faucet
Product Installation Guide
3967
16” SWING SPOUT
13153
CONTROL VALVE
3964
14” SWING SPOUT
2000-7500
SCREW
3963
12” SWING SPOUT
2000-8000
RED BUTTON
AND
2000-8001
BLUE BUTTON
3962
10” SWING SPOUT
3961
8” SWING SPOUT
2000-2301
LEVER HANDLE
2000-3002
BIBB CAP
10464
DUCK GASKET
2000-5000
WASHER
3960
6” SWING SPOUT
3000-0000
RH SWIVEL STEM
REPAIR KIT
OR
3000-0001
LH SWIVEL STEM
REPAIR KIT
3000-0010
LH SWIVEL STEM
OR
3000-0011
RH SWIVEL STEM
Limited One Year Warranty
15621
SPOUT NUT
Fisher Manufacturing Company warrants its products
and parts thereof (except as noted below) against
defects in materials or workmanship for a period of
one year after the date of original purchase. During
this period Fisher Manufacturing Company will
replace a defective product or part without charge to
you, provided that the entire product is delivered to
Fisher Manufacturing Company. All transportation and
insurance charges for shipping the product to and from
Fisher Manufacturing Company must be borne by you.
Charges for transportation and insurance may, at the
option of Fisher Manufacturing Company, be refunded
depending upon our investigation of the warranty claim.
This warranty does not cover external finish (except at
date of original purchase) or labor costs not specifically
authorized by Fisher Manufacturing Company.
2002
SNAP RING
12564
2.2 GPM
AERATOR
2000-5003
SEAT WASHER
1600-5000
SPOUT
O-RINGS
10456
LUBE
1000-7502
SCREW
10456
LUBE
Since 1936, Fisher Manufacturing Company has
manufactured heavy-duty, high quality plumbing
products and hardware specialties for the food service
industry. For three generations, the Fisher family has
adhered to a strict dedication of and overall value.
When you install Fisher products… you install the best.
Our hardware is manufactured with the standardization
of internal mechanisms. All chrome plating is triple
plated copper, nickel and chrome for durability.
Every piece of equipment we make is rigorously
tested in both our modern in-house testing center and
in actual field situations under extreme conditions.
Every detail is thoroughly checked. Before we make
our products available to you, they pass each and
every test. You get proven performance. Guaranteed.
10014 (24”)
10022 (36”)
SUPPLY LINE
1/2” F X 1/2” F
19119
SWIVEL SPOUT
RETRO-FIT KIT
10049 (24”)
10006 (36”)
SUPPLY LINE
1/2” M X 1/2” F
1792
ANGLE STOP
WITH KEY
3000-0003
DOUBLE JOINT
SPOUT 7 1/4”
OR
4000-0002
DOUBLE JOINT
SPOUT 13”
1790-1
ANGLE STOP
W/ CROSS
HANDLES
#64734 - 8” c/c Backsplash Faucet, 6” Swing Spout with
EZ Install Adapters
#64742 - 8” c/c Backsplash Faucet, 8” Swing Spout with
EZ Install Adapters
#64750 - 8” c/c Backsplash Faucet, 10” Swing Spout with
EZ Install Adapters
#64769 - 8” c/c Backsplash Faucet, 12” Swing Spout with
EZ Install Adapters
#64777 - 8” c/c Backsplash Faucet, 14” Swing Spout with
EZ Install Adapters
#64785 - 8” c/c Backsplash Faucet, 16” Swing Spout with
A full and complete copy of our One Year limited EZ Install Adapters
warranty is available upon request.
2400-2103
ELBOWS
WARNING:
Proposition 65 requires that we provide you with the
following notice: “This product Contains A Chemical
Known To The State Of California To Cause Birth
Defects Or Other Reproductive Harm.”
3200-2306
CONCENTRIC
FLANGES
18694
1/2” CONCENTRICS
2200-5000
CONCENTRIC
GASKETS
KEEP THIS MANUAL FOR FUTURE REFERENCE
1000-8002
SLIP JOINT KIT
ANSI/A112.18.1M, ANSI/NSF 61.9
PART NO. 73711
MANFACTURING COMPANY
PO BOX 60, TULARE, CA 93275
(800)421-6162, FAX: (800)832-8238
www.fisher-mfg.com
fisher manufacturing company - toll free: 800-421-6162 fax: 800-832-8238
www.fisher-mfg.com
REV. A
Installation Instructions for Backsplash Faucets
Installation Instructions Continued
BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION
REGARDING BACKFLOW PREVENTION
Installation Notes:
Step 2
• Be sure to shut off water supply before beginning.
• Use pipe thread sealant such as PST on all threaded joints.
• Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your supplier.
Slip Joints
Tools Required for Installation
• Medium Sized Crescent Wrench
• Pipe Thread Sealant
PST
Package Contents
The box should contain the following:
7 3/4” - 8 1/4”
[196.9 - 209.6mm]
Ø7/8”
Supply lines
(not included)
Elbows
(not included)
Control Valve
Qty: 1
Swing Spout
Length determined by model
64807
Qty: 1
EZ Install Adapters
Each spout includes one 2002 snap ring
Qty: 6
and two 1600-5000 o-rings
3200-2306
18694
Concentric Flanges 1/2” Concentrics
Qty: 2
Qty: 4
2200-5000
10456
Concentric Gaskets
Lube
Qty: 4
Step 3
Double Joint
Spout
Installation Instructions
1. After unpacking items and checking for missing components, insert the gasket into the groove
on the concentric. Making sure gasket is in place, loosely mount the concentric and flange onto
the control valve body. For EZ Install adapters, see Install sheet 41548
2. Mount control valve body to the backsplash by inserting the concentrics through the backsplash
and attaching slip joints. Tighten concentrics and attach elbows and supply lines (not included)
as required. Be sure to use pipe thread sealant on all threads.
Apply O-Ring
Lube Here
3. Optional DJ swivel spout, apply lube to the o-ring on the spout. Mount the DJ swivel spout and
tighten the nut onto the faucet spout outlet.
4. Apply lube to the o-rings on the swing spout. Make sure the white snap ring is in place before
mounting the swing spout. Mount the swing spout and tighten the swing spout nut onto the
faucet spout outlet.
4. Turn on water supply and check for leaks.
Step 5
Step 1
Gasket
Concentric
Flange
Step 4
Swing Spout
Apply O-Ring
Lube Here