de Wichtige Information zur Bedienungsanleitung Ihres

J
de
Wichtige Information zur Bedienungsanleitung Ihres neuen KaffeespezialitätenVollautomaten
Die beiliegende Bedienungsanleitung für die IMPRESSA J9.3 gilt auch für Ihre J80.
Geänderter Lieferumfang: Die separate Heißwasserdüse ist nicht im Lieferumfang enthalten.
Kapitel »Heißwasser«: Sie können Heißwasser problemlos mit der Cappucino-Düse zubereiten. Die Zubereitung von Heißwasser funktioniert unabhängig von der verwendeten Düse.
en
Important information about the instructions for use for your new automatic speciality
coffee machine
The enclosed instructions for use for the IMPRESSA J9.3 also apply to the J80.
Change to equipment supplied as standard: The separate hot water nozzle is not supplied
as standard. ‘Hot water’ chapter: You can easily prepare hot water with the cappuccino frother.
Hot water is prepared in the same way no matter whether you use the nozzle or the frother.
fr
Information importante concernant le mode d’emploi de votre nouvelle machine
automatique à spécialités de café
Le mode d’emploi ci-joint pour l’IMPRESSA J9.3 est également valable pour votre J80.
Modification du matériel fourni: La buse à eau chaude séparée n’est pas fournie avec la
machine. Chapitre « Eau chaude » : vous pouvez sans problème préparer de l’eau chaude avec
la buse Cappuccino. La préparation d’eau chaude fonctionne indépendamment de la buse
utilisée.
it
Informazioni importanti relative alle istruzioni per l’uso della Sua nuova macchina
automatica per specialità di caffè
Le allegate istruzioni per l’uso per l’IMPRESSA J9.3 sono valide anche per la Sua J80.
Dotazione modificata: L’ugello acqua calda separato non è in dotazione. Capitolo «Acqua
calda»: l’acqua calda può essere preparata senza problemi con l’ugello per cappuccino. La preparazione dell’acqua calda funziona indipendentemente dall’ugello utilizzato.
nl
Belangrijke informatie over de gebruiksaanwijzing van uw nieuwe volautomaat voor
koffiespecialiteiten
De meegeleverde gebruiksaanwijzing voor de IMPRESSA J9.3 geldt ook voor uw J80.
Gewijzigde leveringsomvang: Het afzonderlijke heetwaterpijpje behoort niet tot de leveringsomvang. Hoofdstuk „Heet water“: u kunt met de cappuccinatore probleemloos heet water
bereiden. De bereiding van heet water werkt onafhankelijk van het gebruikte pijpje.
es
Información importante para el modo de empleo de su nueva máquina automática para
especialidades de café
Las instrucciones de servicio adjuntas para la IMPRESSA J9.3 también son válidas para la J80.
Volumen de suministro modificado: El vaporizador de agua caliente separado no va incluido
en el volumen de suministro. Capítulo «Agua caliente»: usted podrá preparar fácilmente agua
caliente mediante el vaporizador Cappuccino. La preparación de agua caliente funciona de
forma independiente del vaporizador utilizado.
pt
Informações importantes sobre o manual de instruções da sua nova máquina de café
O manual de instruções fornecido para a IMPRESSA J9.3 é válido também para a sua J80.
Alteração do material fornecido: O bocal da água quente separado não faz parte do material
fornecido. Capítulo “Água quente”: com o bocal para cappuccino pode-se preparar água
quente sem problemas. A preparação de água quente funciona independentemente do bocal
utilizado.
sv
Viktig information om bruksanvisningen till din nya helautomatiska kaffespecialitetsmaskin
Den medföljande bruksanvisningen för IMPRESSA J9.3 gäller även för din J80.
Ändrad leverans: Det separata varmvattenmunstycket ingår inte i leveransen. Kapitlet ”Varmvatten”: Varmvatten kan enkelt göras i ordning med cappuccino-skummare. Varmvatten kan
göras i ordning oberoende av vilket munstycke som används.
ru
Важная информация о руководстве по эксплуатации Вашей новой автоматической кофе-машины
J71751/J80/de-ru/201602
Приложенное руководство по эксплуатации для IMPRESSA J9.3 действительно также
для Вашей J80.
Измененный комплект поставки: Отдельная насадка для подачи горячей воды не
входит в комплект поставки. Глава «Горячая вода»: Горячую воду можно легко приготовить при помощи насадки для приготовления капучино. Приготовление горячей воды
осуществляется независимо от используемой насадки.
IMPRESSA J9.3 One Touch TFT Instructions for Use
The Instructions for Use has been awarded the seal of
approval by the independent German Technical Inspection
Agency, TÜV SÜD, due to its easy-to-understand style, its
thoroughness and coverage of safety aspects.
Table of contents
Your IMPRESSA J9.3 One Touch TFT
Control elements
4
Important information
6
Proper use....................................................................................................................................................... 6
For your safety................................................................................................................................................ 6
1 Preparing and using for the first time
10
JURA on the Internet.....................................................................................................................................10
Setting up the machine...............................................................................................................................10
Filling the water tank....................................................................................................................................10
Filling the bean container............................................................................................................................10
First-time use..................................................................................................................................................11
Inserting and activating the filter...............................................................................................................12
Determining and adjusting the water hardness......................................................................................13
Adjusting the grinder...................................................................................................................................15
2 Preparation
16
Ways of preparing a beverage....................................................................................................................16
Espresso and coffee......................................................................................................................................17
Preparing two speciality coffees.................................................................................................................17
Latte macchiato, cappuccino......................................................................................................................18
Warm milk and milk foam...........................................................................................................................19
Ground coffee................................................................................................................................................19
Permanently setting the amount of water for the cup size.................................................................20
Hot water........................................................................................................................................................21
3 Daily operation
22
Switching on................................................................................................................................................. 22
Daily maintenance....................................................................................................................................... 22
Switching off................................................................................................................................................. 23
4 Permanent settings in programming mode
24
Product settings...........................................................................................................................................25
Maintenance settings..................................................................................................................................26
Energy-saving mode................................................................................................................................... 27
Automatic switch-off...................................................................................................................................28
Unit for amount of water............................................................................................................................29
Restore factory settings..............................................................................................................................29
Language.......................................................................................................................................................30
Colour scheme...............................................................................................................................................31
Viewing information.....................................................................................................................................31
2
Table of contents
5 Maintenance
32
Rinsing the machine.................................................................................................................................... 32
Rinsing the cappuccino frother................................................................................................................. 33
Cleaning the cappuccino frother............................................................................................................... 33
Dismantling and rinsing the cappuccino frother...................................................................................34
Changing the filter.......................................................................................................................................34
Cleaning the machine.................................................................................................................................36
Descaling the machine ............................................................................................................................... 37
Cleaning the bean container......................................................................................................................39
Descaling the water tank............................................................................................................................39
6 Display messages
40
7 Troubleshooting
41
8 Transport and environmentally friendly disposal
43
Transport / Emptying the system..............................................................................................................43
Disposal..........................................................................................................................................................43
9 Technical data
44
10 Index
45
11 JURA contact details / Legal information
48
Symbol description
Warnings
J CAUTION Always take note of any information marked with the words CAUTION or
J WARNING WARNING and a warning sign. The signal word WARNING draws your attention
to potential serious injury, and the signal word CAUTION to potential minor
injury.
CAUTION
CAUTION draws your attention to potential damage to the machine.
Symbols used
T
Prompt to take action. This symbol means that you are being prompted to
perform some action.
E
Information and tips to make it even easier to use your IMPRESSA.
‘Espresso’
Display
3
Control elements
Control elements
9
10
11
1
2
12
3
13
4
14
5
15
6
7
8
1
2
3
4
5
6
7
8
4
Bean container cover
Water tank cover
Bean container with aroma preservation
cover
Water tank
Height-adjustable cappuccino frother
Coffee grounds container
Drip tray
Cup platform
9
10
11
12
13
14
15
Filler funnel for ground coffee
Storage compartment cover
Grinder adjustment switch
Hot-water nozzle
Measuring spoon for ground coffee
Height- and width-adjustable coffee spout
Power switch and mains cable
(side of machine)
Control elements
1
2
3
4
5
Top of the machine
1 Q On/Off button
2 g Rotary Switch
3 O P button (programming)
Front
4Display
5 Buttons (button function depends on
what is shown in the display)
5
Important information
Important information
Proper use
The machine is designed and intended for private
domestic use. It should only be used for coffee
preparation and to heat milk and water. Use for any
other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility
for the consequences of improper use.
Before using the machine read these instructions
for use thoroughly and completely and comply
with the instructions they contain. A warranty service is not applicable for damage or defects caused
by non-compliance with the instructions for use.
Keep these instructions for use close to the machine
and pass them on to the next user.
For your safety
J
6
Please carefully read and observe the important
safety information set out below.
To avoid danger of potentially fatal electric shock:
UU Never use a machine which is damaged or has
a defective mains cable.
UU In the event of signs of damage, for example if
there is a smell of burning, unplug the machine
immediately from the mains supply and contact JURA service.
UU If the mains cable of this machine is damaged,
it must be repaired either directly by JURA or
by an authorised JURA service centre.
UU Make sure that the IMPRESSA and the mains
cable are not located close to hot surfaces.
UU Be careful to ensure that the mains cable is not
trapped and does not rub against sharp edges.
Important information
UU Never open and repair the machine yourself.
UU
Do not modify the machine in any way that is
not described in these instructions for use. The
machine contains live parts. If opened, there is
a danger of potentially fatal injury. Repairs
may only be carried out by authorised JURA
service centres, using original spare parts and
accessories.
To completely and safely disconnect the
machine from the power supply, first switch
off the IMPRESSA using the On/Off button and
then at the power switch. Only then should
you remove the mains plug from the power
socket.
There is a risk of scalds or burns on the spouts and
the cappuccino frother.
UU Place the machine out of the reach of children.
UU Do not touch any hot parts. Use the handles
provided.
UU Ensure that the cappuccino frother is correctly
fitted and clean. If incorrectly fitted or if they
become blocked, the cappuccino frother or its
parts might come off.
A defective machine is not safe and could cause
injury or fire. To avoid damage and any associated
risk of injury or fire:
UU Never allow the mains cable to loosely hang
down. The mains cable could pose a tripping
hazard or become damaged.
UU Protect the IMPRESSA from environmental
influences such as rain, frost and direct sunlight.
7
Important information
UU Do not immerse the IMPRESSA, mains cable or
UU
UU
UU
UU
UU
UU
UU
UU
UU
8
connections in water.
Do not put the IMPRESSA or any individual
parts in the dishwasher.
Switch your IMPRESSA off at the power switch
before any cleaning operation. Always wipe
the IMPRESSA with a damp cloth rather than a
wet one, and protect it from prolonged exposure to water splash.
Only connect the machine to the mains voltage in accordance with the information on the
rating plate. The rating plate is located on the
underside of your IMPRESSA. Further technical
data is provided in these instructions for use
(see Chapter 9 ‘Technical data’).
Please only use original JURA maintenance
products. Use of products that are not explicitly recommended by JURA could damage the
IMPRESSA.
Do not use any coffee beans treated with additives or caramelised coffee beans.
Only fill the water tank with fresh, cold water.
Switch the machine off at the power switch if
you are going to be absent for a longer period
of time.
Children may not clean or service the machine
unless supervised by a responsible person.
Do not allow children to play with the machine.
Important information
UU Keep children under the age of 8 away from
UU
the machine, or supervise them constantly.
Children aged 8 and over may only operate
the machine without supervision if they have
been instructed in how to use it safely. Children must be able to recognise and understand the potential dangers arising from incorrect use.
People, including children, who
UU do not have the physical, sensory or mental
capabilities to use the machine safely or
UU are inexperienced or lack knowledge in how to
use the machine safely
must be supervised by a responsible person when
using it, or must be instructed in how to use it correctly.
Safety when handling the CLARIS Blue filter cartridge:
UU Filter cartridges should be kept out of the
reach of children.
UU Store filter cartridges in a dry place in the
sealed packaging.
UU Protect cartridges from heat and direct sunlight.
UU Do not use damaged filter cartridges.
UU Do not open filter cartridges.
9
1 Preparing and using for the first time
1 Preparing and using for the first time
JURA on the Internet
Visit us on the Internet. You can download short operating instructions for your machine from the JURA website (www.jura.com). You
will also find interesting and up-to-date information on your
IMPRESSA and on every aspect of coffee.
Setting up the machine
When setting up your IMPRESSA, please note the following:
Place the IMPRESSA on a horizontal surface that is not sensitive to water.
Choose a spot for your IMPRESSA which protects the machine
against overheating. Ensure that the ventilation slots are not
covered.
UU
UU
Filling the water tank
CAUTION
To enjoy the perfect cup of coffee we recommend changing the
water every day.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
T Open the water tank cover.
T Remove the water tank and rinse it with cold water.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Close the water tank cover.
Filling the bean container
The bean container has an aroma preservation cover. This will ensure
that your coffee beans retain their aroma for longer.
CAUTION
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use untreated coffee beans to fill the bean container.
T Open the bean container cover and remove the aroma preservation cover.
10
1 Preparing and using for the first time
T Remove any dirt or foreign objects from inside the bean
container.
T Fill the bean container with coffee beans, then close the
aroma preservation cover and the bean container cover.
First-time use
J WARNING
If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged or has a defective
mains cable.
Precondition: The water tank and bean container have been filled.
T Insert the mains plug into a power socket.
3 T Switch on the IMPRESSA using the power switch on the
right-hand side of the machine.
Q T Press the On/Off button to switch the IMPRESSA on.
The JURA logo appears. The display then shows the languages you can choose from.
EE To display more languages, press the ‘Next’ button (bottom
right).
T Press the button that corresponds to the language you want,
e.g. ‘English’.
‘Saved’ appears briefly on the display to confirm the setting.
‘Please press the Rotary Switch.’, the Rotary Switch lights up.
T Place a receptacle under the cappuccino frother.
k T Press the Rotary Switch.
‘System is filling.’, the system fills up with water. The operation stops automatically.
‘Please press the Rotary Switch.’
11
1 Preparing and using for the first time
T Place a receptacle under the coffee spout.
k T Press the Rotary Switch.
‘Machine is rinsing.’, the machine rinses. The operation
stops automatically. ‘Please select product:’ appears on the
display. The IMPRESSA is now ready for use.
EE The display shows the products you can prepare.
Inserting and activating
the filter
Your IMPRESSA no longer has to be descaled if you are using the
CLARIS Blue filter cartridge. If the water hardness is 10 °dH or more,
we recommend using the filter cartridge.
EE If you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
EE Perform the ‘inserting the filter’ operation without any interruptions. This will ensure that your IMPRESSA always produces
its best.
Precondition: ‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
g T Turn the Rotary Switch until the programme item
‘Maintenance settings (3/6)’ is displayed.
T Press the ‘Filter’ button.
‘Filter’
T Press the ‘Active’ button.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Insert filter’
T Remove the filter cartridge extension from the Welcome
Pack.
T Fit the filter extension on top of a CLARIS Blue filter cartridge.
T Remove and empty the water tank.
12
1 Preparing and using for the first time
T Open the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
T Close the filter holder. It will click into place audibly.
EE After two months, the filter will cease to work. You can check
the elapsed time by referring to the date plate on the filter
holder in the water tank.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Place a receptacle (at least 500 ml) under the cappuccino
frother.
T Press the ‘Next’ button.
‘Filter is being rinsed.’, water flows out of the cappuccino
frother.
EE You can interrupt rinsing of the filter at any time by pressing
any button. Press the Rotary Switch k to continue rinsing of
the filter.
EE The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
500 ml. The machine heats up. ‘Please select product:’
appears on the display. The filter is now activated.
Determining and
adjusting the water
hardness
EE If you are using the CLARIS Blue filter cartridge and have activated it in programming mode, you will not be able to adjust
the water hardness.
The harder the water is, the more frequently the IMPRESSA needs to
be descaled. It is therefore important to adjust the water hardness.
The water hardness can be adjusted on a continuous scale between
1 °dH and 30 °dH.
13
1 Preparing and using for the first time
14
Determining the water
hardness
You can find out what the water hardness is by using the Aquadur®
test strip supplied as standard.
T Hold the test strip briefly (for 1 second) under flowing water.
Shake off the water.
T Wait for about one minute.
T You will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the
description on the packaging.
You can now adjust the water hardness.
Adjusting the water
hardness
Precondition: ‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
g T Turn the Rotary Switch until the programme item
‘Maintenance settings (3/6)’ is displayed.
T Press the ‘Water hardness’ button.
‘Water hardness’
T Press the ‘ < ’ or ‘ > ’ button to set the water hardness.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display to confirm the setting.
‘Maintenance settings (3/6)’
O T Press the P button to exit programming mode.
‘Please select product:’
1 Preparing and using for the first time
Adjusting the grinder
CAUTION
You can adjust the grinder on a continuous scale to suit the degree
of roast of your coffee.
If you adjust the consistency of grind when the grinder is not operating, the grinder adjustment switch could be damaged.
T Only adjust the consistency of grind when the grinder is running.
The consistency of grind setting is correct if the coffee flows regularly from the coffee spout. In addition a fine, thick crema forms.
Example: Proceed as follows to change the consistency of grind
during the preparation of an espresso.
T Open the storage compartment cover.
T Place a cup under the coffee spout.
T Press the ‘Espresso’ button.
The grinder starts up. ‘Espresso’ is displayed.
T Turn the grinder adjustment switch to the desired position
while the grinder is running.
The espresso is prepared and the consistency of grind is
adjusted.
T Close the storage compartment cover.
15
2 Preparation
2 Preparation
EE You can stop preparation of a speciality coffee, speciality coffee with milk or hot water at any time. Just press any button.
EE During the grinding operation you can select the coffee
strength of individual products by turning the Rotary
Switch g: ; (extra-mild), ;; (mild), ;;; (normal), ;;;; (strong)
or ;;;;; (extra-strong).
EE During preparation, you can change the preset amount
of water by turning the Rotary Switch g or pressing the ‘ < ’
and ‘ > ’ buttons.
EE You can follow the current status of preparation on the display.
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Product settings’).
Ways of preparing a
beverage
Only some of the speciality coffees you can prepare are shown on
the display at any one time. As soon as you turn the Rotary Switch,
more speciality coffees are displayed in the product selector. The
product selector disappears automatically after 5 seconds if no
preparation is started.
The following speciality coffees are displayed as standard:
‘Espresso’
‘Coffee’
‘Cappuccino’
‘Latte macchiato’
‘Hot water’
‘1 portion milk’
UU
UU
UU
UU
UU
UU
Additional speciality coffees in the product selector:
‘Ristretto’
‘2 espressi’
‘2 coffees’
‘2 ristretti’
UU
UU
UU
UU
16
2 Preparation
Espresso and coffee
‘Espresso’ and ‘Coffee’ are prepared following this model.
Example: Proceed as follows to prepare one coffee.
T Place a cup under the coffee spout.
T Press the ‘Coffee’ button.
Preparation will now begin. The preset amount of water for
coffee flows into the cup.
Preparation stops automatically and ‘Please select product:’
appears on the display.
Preparing two speciality
coffees
To prepare two speciality coffees, either use the product selector or
press the appropriate preparation button twice.
Example: Proceed as follows to prepare two coffees (using product
selector).
T Place two cups under the coffee spout.
g T Turn the Rotary Switch to view the product selector.
g T Turn the Rotary Switch until ‘2 coffees’ is displayed.
k T Press the Rotary Switch.
Preparation starts and the preset amount of water for coffee
flows into the cups.
Preparation stops automatically and ‘Please select product:’
appears on the display.
EE Proceed as follows to prepare two cups of coffee at the touch
of a button: Place two cups under the coffee spout. Press the
‘Coffee’ button twice (within two seconds) to start coffee
preparation.
17
2 Preparation
Latte macchiato,
cappuccino
Your IMPRESSA can prepare a latte macchiato or cappuccino at the
touch of a button. There is no need to move the glass or cup.
Example: Proceed as follows to prepare one latte macchiato.
T Remove the protective cover from the cappuccino frother.
T Attach the milk pipe to the cappuccino frother. Use the long
pipe for a milk carton and the short pipe for a milk container.
T Insert the other end of the milk pipe into a milk carton or
connect it to a milk container.
T Place a glass under the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the Milk
Foam position ü.
T Press the ‘Latte macchiato’ button.
‘Latte macchiato’, the milk foam is prepared.
Preparation stops automatically when the preset amount of
milk is reached.
EE There is a short interval while the hot milk separates from the
milk foam. This allows the typical layers of a latte macchiato
to form. You can choose the length of this interval in programming mode (see Chapter 4 ‘Permanent settings in programming mode – Product settings’).
Coffee preparation starts. The preset amount of water flows
into the glass. Preparation stops automatically and ‘Please
select product:’ appears on the display.
To make sure the cappuccino frother always works properly, rinse
and clean it regularly (see Chapter 5 ‘Maintenance – Rinsing the cappuccino frother’).
18
2 Preparation
Warm milk and milk
foam
Example: Proceed as follows to prepare milk foam.
T Remove the protective cover from the cappuccino frother.
T Attach the milk pipe to the cappuccino frother. Use the long
pipe for a milk carton and the short pipe for a milk container.
T Insert the other end of the milk pipe into a milk carton or
connect it to a milk container.
T Place a cup under the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the Milk
Foam position ü.
EE If you want to heat the milk turn the setting wheel of the cappuccino frother to the Milk position z.
T Press the ‘1 portion milk’ button.
‘1 portion milk’
As soon as the machine has heated up, ‘Please select product:’ appears.
T Press the ‘1 portion milk’ button again.
‘1 portion milk’, the milk foam is prepared. Preparation stops
automatically when the preset amount of milk is reached.
‘Please select product:’ appears on the display.
To make sure the cappuccino frother always works properly, rinse
and clean it regularly (see Chapter 5 ‘Maintenance – Rinsing the cappuccino frother’).
Ground coffee
You can choose to use a second coffee variety, for example decaffeinated coffee, with the filler funnel for ground coffee.
EE Never add more than two level measuring spoons of ground
coffee.
EE Use ground coffee which is not ground too finely. Very fine
coffee can block up the system so that the coffee only comes
out in drips.
EE If you did not fill the machine with a sufficient amount of
ground coffee, ‘Not enough ground coffee’ is displayed and
the IMPRESSA stops the operation.
19
2 Preparation
EE The desired speciality coffee must be prepared within approximately one minute after filling with the ground coffee. Otherwise the IMPRESSA stops the operation and is once more
ready for use.
All speciality coffees with ground coffee are prepared following this
model.
Example: Proceed as follows to prepare one espresso using ground
coffee.
T Place an espresso cup under the coffee spout.
T Open the cover of the filler funnel for ground coffee.
‘Please add ground coffee.’
T Place one level measuring spoon of ground coffee into the
filler funnel.
T Close the cover of the filler funnel.
‘Please select product:’
T Press the ‘Espresso’ button.
Preparation will now begin. The preset amount of water for
espresso flows into the cup. Preparation stops automatically
and ‘Please select product:’ appears on the display.
Permanently setting the
amount of water for the
cup size
It is easy to make permanent settings for the amount of water for all
speciality coffees and hot water according to the cup size. Adjust the
amount once as shown in the following example. Every time you
prepare a drink in the future, this amount of water will be dispensed.
The permanent settings for adapting the amount of water to the cup
size for all speciality coffees and hot water follow this model.
Example: Proceed as follows to permanently set the amount of
water for one coffee.
Precondition: ‘Please select product:’ is displayed.
T Place a cup under the coffee spout.
T Press and hold the ‘Coffee’ button.
‘Coffee’ and the fill volume are displayed.
T Hold the ‘Coffee’ button down until ‘Enough water? Press
button’ appears.
T Release the ‘Coffee’ button.
Preparation starts and the coffee flows into the cup.
20
2 Preparation
T Press any button as soon as there is sufficient coffee in the
cup.
Preparation stops. ‘Saved’ appears briefly on the display. The
set amount of water for one coffee is permanently stored.
‘Please select product:’ appears on the display.
EE You can alter this setting at any time by repeating the above
procedure.
EE You can also permanently set the amount for all speciality coffees and hot water in programming mode (see Chapter 4 ‘Permanent settings in programming mode – Product settings’).
Hot water
To obtain a perfect water flow, use the hot-water nozzle. You can find
the hot-water nozzle under the cover of the storage compartment.
The following temperatures can be selected for preparing hot water:
‘Low’, ‘Normal’, ‘X high’.
J CAUTION
There is a danger of scalding from hot water splashes.
T Avoid direct contact with the skin.
T Carefully pull the cappuccino frother down and off.
T Open the storage compartment cover, take out the hotwater nozzle and close the cover again.
T Attach the hot-water nozzle to the connector.
T Place a cup under the hot-water nozzle.
T Press the ‘Hot water’ button.
‘Hot water’ and the temperature are displayed.
EE By pressing the ‘ < ’ or ‘ > ’ button several times (within approximately 2 seconds) you can set the temperature to your individual preference. This setting is not saved.
‘Hot water’, hot water flows into the cup. Preparation stops
automatically and ‘Please select product:’ appears on the
display.
21
3 Daily operation
3 Daily operation
Switching on
When the IMPRESSA is switched on, it automatically prompts you
to perform the rinse operation. Start the rinse operation by pressing
the Rotary Switch k. In programming mode you can change this
setting so that the machine starts the switch-on rinse automatically.
Precondition: Your IMPRESSA is switched on at the power switch.
T Place a receptacle under the coffee spout.
Q T Press the On/Off button to switch the IMPRESSA on.
‘Welcome to JURA’ appears on the display. The machine
heats up.
‘Please press the Rotary Switch.’
k T Press the Rotary Switch.
The machine rinses. The operation stops automatically and
‘Please select product:’ appears on the display.
Daily maintenance
22
To ensure that you get many years of reliable service out of your
IMPRESSA and to guarantee the optimum coffee quality, the
machine requires daily maintenance.
T Pull out the drip tray.
T Empty the coffee grounds container and the drip tray. Rinse
them both with warm water.
T Dry the metal contacts on the back of the drip tray.
T Refit the coffee grounds container and the drip tray.
T Rinse the water tank with clean water.
T Dismantle and rinse the cappuccino frother (see Chapter 5
‘Maintenance – Rinsing the cappuccino frother’).
T Wipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfibre cloth).
3 Daily operation
Switching off
When you switch your IMPRESSA off, the spouts used to prepare a
speciality coffee or milk are rinsed.
T Place one receptacle under the coffee spout and another
under the cappuccino frother.
Q T Press the On/Off button.
‘Machine is rinsing.’, ‘Milk system is being rinsed.’. The
spouts used to prepare a speciality coffee or milk are rinsed.
The operation stops automatically and your IMPRESSA is
switched off.
EE When the IMPRESSA is switched off with the On/Off button,
the machine consumes less than 0.1 W of standby energy. The
machine can be completely disconnected from the power
supply using the power switch.
23
4 Permanent settings in programming mode
4 Permanent settings in programming mode
Press the P button to enter programming mode. You can navigate
through the programme items and permanently save the required
settings simply by turning the Rotary Switch and using the variable
buttons. The following settings can be made:
Programme item
Sub-item
Explanation
‘Maintenance status
(1/6)’
‘Clean’,
‘Descale’ (only if filter is
not activated),
‘Change the filter’ (only if
filter is activated),
‘Rinse the coffee system’,
‘Clean the milk system’
T Start the required maintenance
programme here.
‘Product settings (2/6)’
‘Expert mode’
T Select your settings for speciality coffees
and hot water.
‘Maintenance settings
(3/6)’
‘Filter’,
‘Water hardness’ (only if
filter is not activated),
‘Rinse the coffee system’,
‘Rinse the milk system’
T Indicate whether you are operating your
IMPRESSA with or without a CLARIS Blue
filter cartridge.
T Adjust the water hardness.
T Change the settings for the switch-on
rinse and milk system rinse.
‘Machine settings 1 (4/6)’
‘Save energy’,
‘Switch off after’,
‘Units’,
‘Factory setting’
T Select an energy-saving mode.
T Set the time after which the IMPRESSA
should switch off automatically.
T Select the unit for the amount of water.
T Reset the permanently set values of all
products to the factory settings.
‘Machine settings 2 (5/6)’
‘Choose language’,
‘Display’,
‘Colour scheme’
T Select your language and the background colour for the display.
‘Information (6/6)’
‘Product counter’,
‘Maintenance counter’,
‘Version’
T Keep track of all speciality coffees
prepared and view the number of
maintenance programmes performed.
24
4 Permanent settings in programming mode
Product settings
Product
In the programme item ‘Product settings (2/6)’ you can make individual settings for all speciality coffees and hot water. The following
settings can be made:
Temperature
Coffee strength
Amount
Ristretto,
espresso,
coffee
‘Normal’, ‘High’
‘extra-mild ;’, ‘mild ;;’,
‘normal ;;;’, ‘strong ;;;;’,
‘extra-strong ;;;;;’
Volume: ‘25 ml’ – ‘240 ml’
Two ristretti,
two espressi,
two coffees
‘Normal’, ‘High’
–
Volume: ‘25 ml’ – ‘240 ml’
(per cup)
‘extra-mild ;’, ‘mild ;;’,
‘normal ;;;’, ‘strong ;;;;’,
‘extra-strong ;;;;;’
Amount of milk:
‘3 sec.’ – ‘120 sec.’
Interval: ‘0 sec.’ – ‘60 sec.’
Volume: ‘25 ml’ – ‘240 ml’
Latte macchiato, ‘Normal’, ‘High’
cappuccino
Milk portion
Hot water
–
‘Low’, ‘Normal’,
‘X high’
–
‘3 sec.’ – ‘120 sec.’
–
‘25 ml’ – ‘450 ml’
Example: Proceed as follows to change the amount of milk for a
latte macchiato from ‘16 sec.’ to ‘20 sec.’, the interval from ‘30 sec.’
to ‘40 sec.’ and the amount of water from ‘45 ml’ to ‘40 ml’.
Precondition: ‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
g T Turn the Rotary Switch until the programme item ‘Product
settings (2/6)’ is displayed.
T Press the ‘Expert mode’ button.
‘Expert mode’
EE Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
T Press the ‘Latte macchiato’ button.
‘Latte macchiato’
T Press the ‘Amount of milk’ button.
T Press the ‘ < ’ or ‘ > ’ button to change setting for the amount
of milk to ‘20 sec.’.
25
4 Permanent settings in programming mode
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
T Press the ‘Volume’ button.
T Press the ‘ < ’ or ‘ > ’ button to change setting for the fill volume to ‘40 ml’.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
T Press the ‘Next’ button.
T Press the ‘Interval’ button.
T Press the ‘ < ’ or ‘ > ’ button to change setting for the interval
to ‘40 sec.’.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Latte macchiato’
O T Press the P button to exit programming mode.
‘Please select product:’
Maintenance settings
In the programme item ‘Maintenance settings (3/6)’ you can make
the following settings:
‘Filter’
UUActivate the CLARIS Blue filter cartridge (see Chapter 1 ‘Preparing and using for the first time – Inserting and activating
the filter’).
‘Water hardness’
UUIf you do not have a filter cartridge, you will need to set the
water hardness (see Chapter 1 ‘Preparing and using for the
first time – Adjusting the water hardness’).
‘Rinse the coffee system’ / ‘Manual’
UUThe switch-on rinse must be started manually.
‘Rinse the coffee system’ / ‘Automatic’
UUThe switch-on rinse is started automatically.
‘Rinse the milk system’ / ‘After 10 min.’
UUYou are prompted to rinse the milk system 10 minutes after
preparation of a speciality coffee with milk.
‘Rinse the milk system’ / ‘Immediate’
UUYou are prompted to rinse the milk system immediately
after preparation of a speciality coffee with milk.
UU
UU
UU
UU
UU
UU
26
4 Permanent settings in programming mode
Example: Proceed as follows to make the machine prompt you to
rinse the milk system immediately after preparing a speciality coffee with milk.
Precondition: ‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
g T Turn the Rotary Switch until the programme item ‘Maintenance settings (3/6)’ is displayed.
T Press the ‘Rinse the milk system’ button.
‘Rinse the milk system’
T Press the ‘Immediate’ button.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Maintenance settings (3/6)’
O T Press the P button to exit programming mode.
‘Please select product:’
Energy-saving mode
In the programme item ‘Machine settings 1 (4/6)’ / ‘Save energy’ you
can permanently set an energy-saving mode (Energy Save Mode,
E.S.M.©):
‘Inactive’
UUAll speciality coffees, speciality coffees with milk and hot
water can be prepared without having to wait.
UUBefore milk preparation, the machine heats up.
‘Active’ (Energy saving of up to 40%)
UUSoon after the last preparation, the IMPRESSA stops heating
up. As soon as the energy-saving temperature is reached,
this is indicated in the display by the message ‘Save
energy’ – this may take several minutes.
UUThe machine heats up before coffee, hot water or milk preparation.
UU
UU
Example: Proceed as follows to change the energy-saving mode
from ‘Inactive’ to ‘Active’.
Precondition: ‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
27
4 Permanent settings in programming mode
g T Turn the Rotary Switch until the programme item ‘Machine
settings 1 (4/6)’ is displayed.
T Press the ‘Save energy’ button.
‘Save energy’
T Press the ‘Active’ button.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings 1 (4/6)’
O T Press the P button to exit programming mode.
‘Please select product:’
Automatic switch-off
By instructing your IMPRESSA to automatically switch itself off, you
can cut down your energy consumption. If this function is activated,
your IMPRESSA switches off automatically after the preset time following the last action on the machine.
You can set the automatic switch-off time to 15 minutes or
0.5 – 15 hours.
Precondition: ‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
g T Turn the Rotary Switch until the programme item ‘Machine
settings 1 (4/6)’ is displayed.
T Press the ‘Switch off after’ button.
‘Switch off after’
T Press the ‘ < ’ or ‘ > ’ button to change the setting.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings 1 (4/6)’
O T Press the P button to exit programming mode.
‘Please select product:’
28
4 Permanent settings in programming mode
Unit for amount of water
You can change the unit for the amount of water from ‘ml’ to ‘oz’.
Example: Proceed as follows to change the unit for the amount of
water from ‘ml’ to ‘oz’.
Precondition: ‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
g T Turn the Rotary Switch until the programme item ‘Machine
settings 1 (4/6)’ is displayed.
T Press the ‘Units’ button.
‘Units’
T Press the ‘oz’ button.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings 1 (4/6)’
O T Press the P button to exit programming mode.
‘Please select product:’
Restore factory settings
In the programme item ‘Machine settings 1 (4/6)’ / ‘Factory setting’
you can reset various settings to their factory settings:
‘Machine’
UUAll customer settings (apart from the ‘filter’) are reset to
factory settings. Your IMPRESSA then switches off.
‘Products’
UUThe settings (amount of water, aroma, temperature etc.) for
any product can be reset individually to the factory settings.
The corresponding double product is also reset to the factory settings at the same time.
‘All products’
UUThe settings (amount of water, aroma, temperature etc.) for
all products are reset to the factory settings.
‘Display’
UUAll display settings are reset to the factory settings.
UU
UU
UU
UU
Example: Proceed as follows to reset the values for ‘Espresso’ to the
factory settings.
Precondition: ‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
29
4 Permanent settings in programming mode
g T Turn the Rotary Switch until the programme item ‘Machine
settings 1 (4/6)’ is displayed.
T Press the ‘Factory setting’ button.
‘Factory setting’
T Press the ‘Products’ button.
T Press the ‘Espresso’ button.
‘Espresso’ / ‘Reset this product to the factory setting?’
T Press the ‘Next’ button.
‘Saved’ appears briefly on the display.
‘Factory setting’
O T Press the P button to exit programming mode.
‘Please select product:’
Language
In this programme item you can set the language used by your
IMPRESSA.
EE If you choose the wrong language by mistake, you can easily
reset the machine to ‘English’: Press the P button to enter programming mode. Use the Rotary Switch g to select programme item ‘5/6’ and then press the top left-hand button.
Example: Proceed as follows to change the language from ‘English’
to ‘Deutsch’.
Precondition: ‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
g T Turn the Rotary Switch until the programme item ‘Machine
settings 2 (5/6)’ is displayed.
T Press the ‘Choose language’ button.
‘Choose language’
T Press the ‘Deutsch’ button.
‘Gespeichert’ appears briefly on the display.
‘Geräteeinstellungen 2 (5/6)’
O T Press the P button to exit programming mode.
‘Bitte wählen Sie Ihr Produkt:’
30
4 Permanent settings in programming mode
Colour scheme
In this programme item you can set the background colour for the
display of your IMPRESSA.
Precondition: ‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
g T Turn the Rotary Switch until the programme item ‘Machine
settings 2 (5/6)’ is displayed.
T Press the ‘Colour scheme’ button.
‘Colour scheme’
T Press the ‘ < ’ or ‘ > ’ button to change the setting.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings 2 (5/6)’
O T Press the P button to exit programming mode.
‘Please select product:’
EE The selected background colour only applies on the selection
page of the display showing the speciality coffees.
Viewing information
In the programme item ‘Information (6/6)’ you can view the following information:
‘Product counter’: Number of prepared speciality coffees,
­speciality coffees with milk and hot water
‘Maintenance counter’: Maintenance status and number of
maintenance programmes performed (cleaning, descaling,
changing the filter)
‘Version’: Software version
UU
UU
UU
Precondition: ‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
g T Turn the Rotary Switch until the programme item ‘Information (6/6)’ is displayed.
T Press the ‘Product counter’ button.
The number of speciality coffees prepared is displayed.
T Press the ‘’ button.
‘Information (6/6)’
O T Press the P button to exit programming mode.
‘Please select product:’
31
5 Maintenance
5 Maintenance
Your IMPRESSA has the following integrated maintenance programmes:
Rinsing the machine (‘Rinse the coffee system’)
Rinsing the cappuccino frother (‘Rinse the milk system’)
Cleaning the cappuccino frother (‘Clean the milk system’)
Changing the filter (‘Change the filter’)
Cleaning the machine (‘Clean’)
Descaling the machine (‘Descale’)
UU
UU
UU
UU
UU
UU
EE Clean or descale the machine, rinse the milk system or change
the filter when you are prompted to do so.
EE Press the P button to view a list of the maintenance programmes (‘Maintenance status (1/6)’). By referring to the bar
you can see how soon each maintenance programme is due.
When the bar is completely filled with red, the IMPRESSA will
prompt you to perform the maintenance programme.
EE The IMPRESSA will not prompt you to clean the milk system.
In the interests of hygiene, you should clean the milk system
daily when you have been preparing milk.
Rinsing the machine
You can initiate the rinse operation manually at any time.
Precondition: ‘Please select product:’ is displayed.
T Place a receptacle under the coffee spout.
O T Press the P button.
‘Maintenance status (1/6)’
T Press the ‘Rinse the coffee system’ button.
‘Machine is rinsing.’, water flows out of the coffee spout.
The rinse stops automatically and ‘Please select product:’
appears on the display.
32
5 Maintenance
Rinsing the cappuccino
frother
After each milk preparation, the IMPRESSA prompts you to rinse the
milk system.
Precondition: ‘Rinse the milk system’ is displayed.
T Place a receptacle under the cappuccino frother.
k T Press the Rotary Switch.
‘Milk system is being rinsed.’, water flows out of the cappuccino frother.
The rinse stops automatically and ‘Please select product:’
appears on the display.
Cleaning the cappuccino
frother
CAUTION
To ensure that the cappuccino frother always works properly, you
should clean it daily when you have been preparing milk. Your
IMPRESSA will not prompt you to clean the cappuccino frother.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
EE JURA Cappuccino Cleaner is available from stockists.
Precondition: ‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
T Press the ‘Clean the milk system’ button.
‘Cleaning agent for milk system’
T Pour 250 ml of fresh water into a receptacle and add one
capful (max. 15 ml) of Cappuccino Cleaner.
T Immerse the milk pipe in the receptacle.
T Turn the setting wheel of the cappuccino frother to the Milk
Foam ü or Milk z position.
T Place another receptacle under the cappuccino frother.
T Press the ‘Next’ button.
‘Milk system is being cleaned.’, water flows out of the cappuccino frother.
‘Water for cleaning milk system’
T Rinse the receptacle thoroughly, fill it with 250 ml of fresh
water and immerse the milk pipe in the water.
33
5 Maintenance
T Empty the other receptacle and place it under the cappuccino frother again.
T Press the ‘Next’ button.
‘Milk system is being cleaned.’, the cappuccino frother and
the pipe are rinsed with fresh water.
‘Please select product:’ appears on the display.
Dismantling and rinsing
the cappuccino frother
T Carefully pull the cappuccino frother down and off.
T Dismantle the cappuccino frother into its individual parts.
T Rinse all parts of the cappuccino frother thoroughly under
running water.
T Reassemble the cappuccino frother.
EE Ensure that all individual parts are correctly and firmly connected to ensure correct operation of the cappuccino frother.
T Firmly attach it to the connector.
Changing the filter
EE After 50 litres of water have flowed through, the filter will
cease to work. Your IMPRESSA will automatically prompt you
to change the filter.
EE After two months, the filter will cease to work. You can check
the elapsed time by referring to the date plate on the filter
holder in the water tank.
EE If the CLARIS Blue filter cartridge is not activated in programming mode, you will not be prompted to change the filter.
Precondition: ‘Change filter’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
T Press the ‘Change the filter’ button.
‘Change the filter’
EE If you do not want to start changing the filter just yet, press
the ‘’ button. The prompt ‘Change filter’ remains active.
34
5 Maintenance
T Press the ‘Next’ button.
‘Change filter’
T Remove and empty the water tank.
T Open the filter holder and remove the old CLARIS Blue filter
cartridge and filter extension.
T Fit the filter extension on top of a new filter cartridge.
T Insert the filter cartridge into the water tank, exerting slight
pressure.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Place a receptacle (at least 500 ml) under the cappuccino
frother.
T Turn the setting wheel of the cappuccino frother to the
Steam position n.
T Press the ‘Next’ button.
‘Filter is being rinsed.’, water flows out of the cappuccino
frother.
EE You can interrupt rinsing of the filter at any time by pressing
any button. Press the Rotary Switch k to continue rinsing of
the filter.
EE The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
500 ml. The machine heats up. ‘Please select product:’
appears on the display.
35
5 Maintenance
Cleaning the machine
CAUTION
After 200 preparations or 80 switch-on rinses, the IMPRESSA will
prompt you to clean it.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
EE The cleaning programme lasts approximately 20 minutes.
EE Do not interrupt the cleaning programme. The quality of
cleaning will be impaired if you do so.
EE JURA cleaning tablets are available from stockists.
Precondition: ‘Clean machine’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
T Press the ‘Clean’ button.
‘Clean’
EE If you do not want to start cleaning just yet, press the ‘’ button. The prompt ‘Clean machine’ remains active.
T Press the ‘Next’ button.
‘Empty coffee grounds container’
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Please press the Rotary Switch.’
T Place one receptacle under the coffee spout and another
under the cappuccino frother.
k T Press the Rotary Switch.
‘Machine is being cleaned.’, water flows out of the coffee
spout.
The operation is interrupted, ‘Add cleaning tablet’.
T Open the cover of the filler funnel for ground coffee.
T Insert a JURA cleaning tablet into the filler funnel.
T Close the cover of the filler funnel.
‘Please press the Rotary Switch.’
36
5 Maintenance
k T Press the Rotary Switch.
‘Machine is being cleaned.’, water flows repeatedly out of
the coffee spout and the cappuccino frother.
The operation is interrupted, ‘Empty coffee grounds con­
tainer’.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
Cleaning is now complete. The IMPRESSA is once more
ready for use.
Descaling the machine
The IMPRESSA builds up deposits of limescale over time and automatically prompts you to descale it when necessary. The degree of
calcification depends on the hardness of your water.
J CAUTION
If the descaling agent comes into contact with the skin or eyes, this
can cause irritation.
T Avoid contact with the skin or eyes.
T Rinse off descaling agent with clean water. Should you get any
descaling agent in your eye, see a doctor.
CAUTION
If the wrong descaling agent is used, the machine could be damaged and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
CAUTION
If the descaling operation is interrupted, there may be damage to
the machine.
T Allow the descaling programme to run to the end.
CAUTION
If the descaling agent comes into contact with sensitive surfaces
(e.g. marble), damage cannot be ruled out.
T Clean up any splashes immediately.
EE The descaling programme lasts approximately 45 minutes.
EE JURA descaling tablets are available from stockists.
EE If you use a CLARIS Blue filter cartridge and this is activated,
you will not be prompted to descale.
37
5 Maintenance
Precondition: ‘Decalcify machine’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
T Press the ‘Descale’ button.
‘Descale’
EE If you do not want to start descaling just yet, press the ‘’ button. The prompt ‘Decalcify machine’ remains active.
T Press the ‘Next’ button.
‘Empty drip tray’
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Pour descaling agent into water tank.’
T Remove and empty the water tank.
T Completely dissolve the contents of one blister (three JURA
descaling tablets) in a receptacle holding 500 ml of water.
This may take several minutes.
T Pour the solution into the empty water tank and insert it into
the machine.
‘Please press the Rotary Switch.’
T Remove the cappuccino frother.
T Place a receptacle (at least 500 ml) under the connector of
the cappuccino frother.
k T Press the Rotary Switch.
‘Machine is being descaled.’, water flows repeatedly out of
the connector of the cappuccino frother.
The operation stops automatically, ‘Empty drip tray’.
T Empty the receptacle under the connector of the cappuccino frother.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Fill water tank’
T Remove the water tank and rinse it thoroughly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
‘Please press the Rotary Switch.’
T Refit the cappuccino frother.
38
5 Maintenance
T Place a receptacle under the cappuccino frother and another
under the coffee spout.
k T Press the Rotary Switch.
‘Machine is being descaled.’, water flows out of the cappuccino frother and the coffee spout.
‘Machine is heating.’, ‘Machine is rinsing.’, water flows out of
the coffee spout.
The operation stops automatically, ‘Empty drip tray’.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
Descaling is now complete. The IMPRESSA is once more
ready for use.
EE If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
Cleaning the bean
container
Coffee beans may be covered with a slight oil film which remains on
the walls of the bean container. These traces may negatively affect
the coffee result. For this reason clean the bean container from time
to time.
Precondition: ‘Fill bean container’ is displayed.
Q T Switch the machine off with the On/Off button.
3 T Switch the machine off at the power switch.
T Open the bean container cover and remove the aroma preservation cover.
T Clean the bean container with a soft, dry cloth.
T Fill the bean container with coffee beans, then close the
aroma preservation cover and the bean container cover.
Descaling the water tank
Limescale deposits may form in the water tank. To ensure correct
function of the machine, descale the water tank from time to time.
T Remove the water tank.
T If you use a CLARIS Blue filter cartridge, remove this.
T Descale the tank with a mild conventional descaling agent
in accordance with the manufacturer's instructions.
T Rinse out the water tank thoroughly.
T If you use a CLARIS Blue filter cartridge, insert this again.
T Fill the water tank with fresh, cold water and reinsert the tank.
39
6 Display messages
6 Display messages
Message
Cause/Result
Action
‘Fill water tank’
The water tank is empty. You
cannot prepare any products.
T Fill the water tank (see Chapter 1
‘Preparing and using for the first time –
Filling the water tank’).
‘Empty coffee
grounds container’
The coffee grounds container is
full. You cannot prepare any
products.
T Empty the coffee grounds container
and the drip tray (see Chapter 3 ‘Daily
operation – Daily maintenance’).
‘Empty drip tray’
The drip tray is full. You cannot
prepare any products.
T Empty the drip tray.
T Clean and dry the metal contacts on
the back of the drip tray.
‘Drip tray not
fitted’
The drip tray is not inserted
correctly or is not inserted at all.
You cannot prepare any products.
T Fit the drip tray.
‘Please press the
Rotary Switch.’
The IMPRESSA is prompting you
to perform a rinse or continue a
maintenance programme that
was already started.
T Press the Rotary Switch to start the
rinse or to continue the maintenance
programme.
‘Fill bean
container’
The bean container is empty. You
cannot prepare any products.
T Fill the bean container (see Chapter 1
‘Preparing and using for the first time –
Filling the bean container’).
‘Rinse the milk
system’
The IMPRESSA is prompting you
to rinse the milk system.
T Press the Rotary Switch to start
rinsing the milk system.
‘Change filter’
The filter cartridge no longer
works.
T Replace the CLARIS Blue filter
cartridge (see Chapter 5 ‘Maintenance –
Changing the filter’).
‘Clean machine’
The IMPRESSA is prompting you
to clean it.
T Perform cleaning (see Chapter 5
‘Maintenance – Cleaning the machine’).
‘Decalcify
machine’
The IMPRESSA is prompting you
to descale it.
T Perform descaling (see Chapter 5
‘Maintenance – Descaling the
machine’).
‘Not enough
ground coffee’
There is insufficient ground coffee
in the machine; the IMPRESSA
stops the operation.
T The next time you prepare a beverage, add more ground coffee (see
Chapter 2 ‘Preparation – Ground
coffee’).
40
7 Troubleshooting
7 Troubleshooting
Problem
When preparing a latte
macchiato, the typical
three layers do not
form.
Cause/Result
–
Action
T Turn the setting wheel of the cappuccino to the far right and the Milk Foam
position ü.
T Change the length of the interval to at
least 30 seconds in programming mode
(see Chapter 4 ‘Permanent settings in
programming mode – Product settings’).
The cappuccino frother is
Insufficient foam is
produced when the milk dirty.
is frothed or milk sprays
from the cappuccino
frother.
T Rinse and clean the cappuccino frother
(see Chapter 5 ‘Maintenance – Rinsing
the cappuccino frother’).
T Check that the air intake pipe is fitted
on the cappuccino frother.
T Rinse or replace the air intake pipe. You
will find a replacement in the Welcome
Pack.
Coffee only comes out
in drips when it is being
prepared.
Coffee or ground coffee
has been ground too
finely and is blocking the
system. The same filter
cartridge may have been
used several times or the
water hardness set
incorrectly in the programming mode.
T Put the grinder on a coarser setting or
use coarser ground coffee (see Chapter 1
‘Preparing and using for the first time –
Adjusting the grinder’).
T Perform descaling (see Chapter 5
‘Maintenance – Descaling the machine ’).
Water hardness cannot
be adjusted.
The CLARIS Blue filter
cartridge is activated.
T Deactivate the filter cartridge in
programming mode.
‘Fill bean container’
is not displayed
although the bean
container is empty.
The bean monitor is dirty.
T Clean the bean container (see Chapter 5
‘Maintenance – Cleaning the bean
container’).
‘Empty drip tray’
is always displayed.
The metal contacts of the
drip tray are dirty or wet.
T Clean and dry the metal contacts on
the back of the drip tray.
41
7 Troubleshooting
Problem
Cause/Result
Action
‘Fill water tank’
is displayed although
the water tank is full.
The water tank float is
trapped.
T Descale the water tank (see Chapter 5
‘Maintenance – Descaling the water
tank’).
Little or no water or
steam comes out of the
cappuccino frother. The
pump is very quiet.
The connector of the
cappuccino frother may
be blocked by milk
residues or limescale
fragments loosened
during descaling.
T Remove the cappuccino frother.
T Unscrew the black connector with the
aid of the hexagonal hole on the
measuring spoon for ground coffee.
T Clean the connector thoroughly.
T Screw the connector back on by hand.
T Carefully tighten it using the hexagonal
hole on the measuring spoon, turning by
no more than a quarter of a rotation.
Grinder is making a
very loud noise.
There are foreign objects
in the grinder.
T Contact customer support in your
country (see Chapter 11 ‘JURA contact
details / Legal information’).
‘ERROR 2’ is displayed.
If the machine was
exposed to the cold for a
long period of time,
heating is disabled for
safety reasons.
T Warm the machine at room
temperature.
Other ‘ERROR’
messages are displayed.
–
T Switch the IMPRESSA off at the power
switch. Contact customer support in your
country (see Chapter 11 ‘JURA contact
details / Legal information’).
EE If you were unable to solve the problem, contact customer
support in your country (see Chapter 11 ‘JURA contact details /
Legal information’).
42
8 Transport and environmentally friendly disposal
8 Transport and environmentally friendly disposal
Transport / Emptying the
system
In order to protect the IMPRESSA from frost during transport, the
system must be emptied.
Precondition: ‘Please select product:’ is displayed.
T Carefully pull the cappuccino frother down and off.
T Place a receptacle under the connector of the cappuccino
frother.
T Press the ‘1 portion milk’ button.
‘Machine is heating.’
As soon as the machine has heated up, ‘Please select product:’ appears.
T Press the ‘1 portion milk’ button again.
‘1 portion milk’, hot steam is discharged from the connector.
T Remove and empty the water tank.
g T Turn the Rotary Switch until ‘60 sec.’ is displayed.
Steam will continue to be discharged from the connector
until the system is empty.
‘Fill water tank’
Q T Press the On/Off button.
The IMPRESSA is switched off.
Disposal
Please dispose of old machines in an environmentally neutral way.
H
Old machines contain valuable, recyclable materials which should
be recycled. Please therefore dispose of old machines via suitable
collection systems.
43
9 Technical data
9 Technical data
44
Voltage
220–240 V ~, 50 Hz
Power
1450 W
Safety test
S
Energy consumption
‘Save energy’ / ‘Active’
Approx. 5 Wh
Energy consumption
‘Save energy’ / ‘Inactive’
Approx. 12 Wh
Pump pressure
Static, max. 15 bar
Holding capacity of water tank
2.1 l
Holding capacity of bean container
250 g
Holding capacity of coffee grounds
container
Max. 16 portions
Cable length
Approx. 1.1 m
Weight
10.9 kg
Dimensions (W × H × D)
28.5 × 34.2 × 43.3 cm
10 Index
10 Index
A
B
C
Addresses 48
Automatic switch-off 28
Bean container
Bean container with aroma preservation
cover 4
Cleaning 39
Filling 10
Bus bar
Technical data 44
Button
On/Off button 5
P button (programming) 5
Cappuccino 18
Cappuccino frother
Cleaning 33
Rinsing 33
CLARIS Blue filter cartridge
Changing 34
Inserting and activating the filter 12
Cleaning
Bean container 39
Cappuccino frother 33
Machine 36
Coffee 17
Coffee grounds container 4
Coffee spout
Height- and width-adjustable coffee
spout 4
Consistency of grind
Adjusting the grinder 15
Grinder adjustment switch 4
Contact details 48
Cover
Bean container 4
Cup platform 4
Customer support 48
D
E
F
G
H
Degree of water hardness 13
Descaling
Machine 37
Water tank 39
Determining and adjusting the water
hardness 13
Display 5
Display messages 40
Drip tray 4
Emptying the system 43
Energy-saving mode 27
Errors
Troubleshooting 41
Espresso 17
Factory settings
Restore factory settings 29
Filler funnel
Filler funnel for ground coffee 4
Filling
Bean container 10
Water tank 10
Filter
Changing 34
Inserting and activating the filter 12
First-time use 11
Frother
Cappuccino frother 4
Ground coffee 19
Hotline 48
Hot water 21
Hot-water nozzle 4
45
10 Index
I
J
L
M
Instant coffee
Ground coffee 19
Internet 10
P
JURA
Contact details 48
Internet 10
Language 30
Latte macchiato 18
Machine
Cleaning 36
Descaling 37
Rinsing 32
Setting up 10
Switching off 23
Switching on 22
Mains cable 4
Maintenance
Daily maintenance 22
Maintenance 32
Messages, display 40
Milk foam 19
Milk system cleaning
Cappuccino frother cleaning 33
Milk system rinse
Rinsing the cappuccino frother 33
Milk, warm 19
46
R
Permanently setting the water for the cup
size 20
Permanent settings in programming mode
24
Power switch 4
Preparation 16, 18
Cappuccino 18
Coffee 17
Espresso 17
Ground coffee 19
Latte macchiato 18
Milk 19
Problems
Troubleshooting 41
Programming mode 24
Automatic switch-off 28
Energy-saving mode 27
Language 30
Maintenance settings 26
Product settings 25
Restore factory settings 29
Unit for amount of water 29
Proper use 6
Rinsing
Cappuccino frother 33
Machine 32
Rotary Switch 5
10 Index
S
T
U
V
Safety 6
Safety information 6
Settings
Permanent settings in programming
mode 24
Setting up
Setting up the machine 10
Short operating instructions 10
Switching off 23
Switching on 22
Switch-off
Automatic switch-off 28
Symbol description 3
Technical data 44
Telephone 48
Troubleshooting 41
Unit for amount of water 29
Use, First-time 11
Viewing information 31
W
Warm milk 19
Water tank 4
Descaling 39
Filling 10
Website 10
47
Art. 69430/J9.3/en/201401
11 JURA contact details / Legal information
11 JURA contact details / Legal information
JURA Elektroapparate AG
Kaffeeweltstrasse 10
CH-4626 Niederbuchsiten
Tel. +41 (0)62 38 98 233
@@ You will find additional contact details for your country at
www.jura.com.
Directives
Technical changes
48
The machine complies with the following directives:
2006/95/EC – Low Voltage Directive
2004/108/EC – Electromagnetic Compatibility
2009/125/EC – Ecodesign
2011/65/EU – RoHS Directive
UU
UU
UU
UU
We reserve the right to make technical changes. The diagrams used
in these instructions for use are for illustration purposes only and do
not represent the original colours of the machine. Some details of
your IMPRESSA may vary.
Feedback
Your opinion is important to us! Use the contact link at
www.jura.com.
Copyright
The instructions for use contain information which is protected by
copyright. It is not permitted to photocopy these instructions for use
or translate them into another language without the prior written
consent of JURA Elektroapparate AG.