Color Variants VG415211CA Stainless steel Width 15

VG415211CA
Vario gas wok 400 series
Stainless steel
Width 15"
Natural gas
Wok burner with up to 18,800 BTU
Color Variants
VG415211CA
Stainless steel
Width 15"
Included accessories
1 x WOK attachment ring.
Optional accessories
WP400001
Wok pan made of multiple-layer
material
Required installation accessories
VA420000
Connection strip for combination with
other Vario appliances of the 400 series
for flush installation
VA420001
Connection strip for combination with
other Vario appliances of the 400 series
for flush installation with appliance
cover/filler strip
VA420011
Connection strip for combination with
other Vario appliances of the 400 series
for surface-mount installation with
appliance cover/filler strip
VA440010
Stainless steel cover with mounting
strip
VA450400
Stainless steel adjustment strip 15"
Three-ring burner with 18,800 BTU
Full electronic power regulation on
12 levels
Full electronic gas valves for precise
and reproducible power regulation
Automatic fast ignition, electronic
flame monitoring with automatic reignition
Simmer function for cooking on a
very low output level
Solid stainless steel control knob
Precision crafting of 1/8-inch
stainless steel
For surface mount installation with a
visible edge or for flush installation
Can be perfectly combined with other
Vario 400 series products
Cooking zones
1 three-ring wok burner (1,000 – 18,800
BTU), suitable for pots up to max. ø 12
5/8".
Operation
Control knobs with illuminated
ring, cooking zone and output level
markings.
One-handed operation.
Full electronic control in 12 output
levels for exact power level regulation
plus simmer function
Automatic quick ignition.
Features
Simmer function
Cast pan support with flat, continuous
pot surface.
Brass burner rings.
Safety
Electronic flame monitoring with
automatic re-ignition.
Residual heat indication.
Safety shut-off.
Planning notes
Depending on the type of installation
- surface or flush-mounted, with or
without cover - the specific location of
the control knob positions may vary.
The drawing "Installation of the control
knob" must be observed if the panel
is more than 1" thick (there must be a
recess at the rear).
When using the appliance cover VA 440
or adjustment strip VA 450 additional
space for cut-out depth needs to be
considered.
In a combination of Vario cooktops
with at least one appliance cover, the
adjustment strip VA 450 is required.
In a combination of several Vario 400
series cooktops a connection strip
must be used. Depending on the type
of installation - surface-/ or flushmounted, with or without cover - the
respective VA 420 connecting strip
must be used.
For flush installation the edge height
in the cut-out needs to be at least 1/2"
and for surface-mount 3/8". Ensure a
continuous cut surface of 90°.
The weight capacity and stability,
especially in case of thin countertops,
must be supported using suitable
substructures. Take the appliance
weight and additional loads into
account.
Flush installation is possible in
countertops made of stone, synthetics
or solid wood. Heat resistance and
watertight sealing of the edges must
be observed. For other materials,
please consult with your countertop
manufacturer.
Product Features
Product name / series name
Vario/Domino gas hob
Construction type
CONSTR_TYPE.Built-in
Energy source
Gas
Total number of cooktop burners
1
Required cutout size (HxWxD) (mm)
131 x 360 x 492
Width of the product (mm)
380
Overall appliance dimensions (HxWxD)
(mm)
131 x 380 x 520
Product packaging dimensions
(HxWxD) (mm)
290 x 500 x 600
Net weight (kg)
15.0
Gross weight (kg)
17.0
Residual heat indicator
Separate
Location of control panel
External control
Basic surface material
brushed stainless steel
Color of surface
Stainless steel, Stainless steel
Color of frame
Stainless steel, Stainless steel
Approval certificates
ETL
Power cord length (cm)
140
Consumption and connection features
Watts (W)
15
Gas connection rating (W)
5500
Current (A)
2
Volts (V)
120
Frequency (Hz)
60
2018-01-11
Page 1
The groove must be continuos and
even, so that uniform placing of the
appliance on the gasket is ensured. Do
not use discontinuos lining.
The joint width may vary due to size
tolerances of the combinations and of
the countertop cut-out.
If installing several Vario products in
individual cut-outs allow for a minimum
distance of 2" inbetween the cooktops.
Special nozzles can be ordered as
spare parts.
Plan for an electrical connection (the
appliance is not operable without
power supply).
Air intake from above.
No intermediate shelf required.
The rear panel must consist of a nonflammable material.Wall trims must be
resistant to heat.
A minimum clearance of at least 6"
from adjacent heat-sensitive furniture
or contact surfaces must be observed
or thermal insulation fitted.
When used with VL 414 downdraft
ventilation, the air deflector AA 414 is
recommended to ensure maximum
performance of the cooktop.
Appliance clicks into place when
inserted into the countertop from
above.
Rating
Total rating: 18,800 BTU (5.5 kW).
Total Amps: .2 A.
120 V / 60 Hz
Connecting cable 55" with plug.
VG415211CA
Vario gas wok 400 series
Stainless steel
Width 15"
Natural gas
Wok burner with up to 18,800 BTU
2018-01-11
Page 2
Download PDF