Digital Radio Digitalradio

00054820
(DR1600)
Digital Radio
Digitalradio
Operating Instructions
GB
Technical Data
Radio Receiver
DAB
ü
DAB+
ü
FM
ü
Internet
-
Spotify
-
Connectivity
Bluetooth v. 3.0 (A2DP, AVRCP)
Display
2.8“ 2x16 Icon LCD
Speaker
10 W RMS (2 x 5W)
Impedance
4 ohm 2.75“ Speaker
Power input
12 V
Frequency range
DAB/DAB+:
174-240 MHz
FM:
87.5-108 MHz
Sensitivity
DAB/DAB+:
-97 ~ 99 dBm
FM:
-105 ~ 109 dBm
Power Consumption
Operation
Input & Output
DC Socket, Line Out, Aux in, 3.5mm Earphone Jack, B type USB Jack for firmware upgrade
Presets
DAB/DAB+:
30
Codec
DAB:
MP2, AAC
UI Languages
English, French, German, Italian, Finnish, Dutch, Danish, Norwegian, Polish, Swedish,
Slovak, Czech
Package Content
Manual, AC-DC Adapter
Dimension (WxHxD)
163 x 122 x 150 mm
Weight
1250 g
1000 mA
max. 12 W
Standby
<1W
FM:
30
Bluetooth
AAC, SBC
A
9
10
1
3
2
7
4
5
6
8
B
11
Designed by
Germany
Assembled in China
+
12
13
14
15
16
G Operating Instructions
Controls and Displays
1
A: Front
[volume -/+] / Rotate: Volume control
Press: On/off switch
[ ]
2
[info]
3
[menu]
Direct access to the menu /
Back one menu level
4
[mode]
Changing operating mode
(Bluetooth, DAB, FM, Aux in)
5
[pair]
Direct access to pairing mode
6
[alarm]
7
[memory]
List/save favourites
8
[enter/
navigate]
Rotate: Select
Press: Confirm
9
[SNOOZE]
Activating Snooze
10
Display additional information
Direct access to alarm clock
settings
2.8” LCD
B: Back
11
Antenna
12
Mains power supply
13
Headphone socket
14
AUX IN socket
15
LINE OUT socket
16
UPDATE PORT SOCKET
1
Content
1. Explanation of Warning Symbols and Notes . . . . . . . . . . . 5
12. System settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
12.1 Equaliser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
12.2 Time/ Date. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
12.3 Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
12.4 Factory Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
12.5 Software update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
12.6 Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
12.7 Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
12.8 AUX: Auto-Standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2. Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Safety Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4. Informations and notes before getting started . . . . . . . . . 6
5. Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5.1 Radio – Connecting and starting up. . . . . . . . . . . . . . . . . . . . . 6
5.2. General notes on use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5.3 Initial setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
13. Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6. DAB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6.1 Search/ Automatic search . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6.2 Manual station search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6.3 Station list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6.4 Edit station list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6.5 Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6.5.1 Save favourites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6.5.2 Access favourites. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6.6 DRC (Dynamic Range Control) . . . . . . . . . . . . . . . . . . . . . . . . . 9
14. Warranty Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
15. Service and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
16. Recycling Information
Note on environmental protection: . . . . . . . . . . . . . . . . . . . 16
17. Declaration of Conformity. . . . . . . . . . . . . . . . . . . . . . . . 16
7. FM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7.1 Scan setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7.2 Automatic station search . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7.3 Manual station search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7.4 Favoriten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7.4.1 Save favourites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7.4.2 Access favourites. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7.5 Audio setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
8. Auxiliary Input. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
9. Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
9.1 BIuetooth pairing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
9.2 Automatic Bluetooth connection (after successful pairing) . . . 12
10. Sleep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
11. Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
11.1 Alarm settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
11.2 Activating/ deactivating the alarm . . . . . . . . . . . . . . . . . . . . 13
11.3 Activate/ deactivate alarm in standby mode . . . . . . . . . . . . . 13
11.4 Stopping the alarm/ Snooze function . . . . . . . . . . . . . . . . . . 13
2
Menu structure
DAB
FM
Station list
Full scan
Manual tune
DRC
Clear
System
Scan setting
All stations
Bluetooth
Auxiliary Input
System
System
DRC off
DRC high
DRC low
Strong stations only
All stations
Stereo allowed
Forced mono
System
System
Sleep
Equaliser
Time
Off
15 minutes
30 minutes
45 minutes
60 minutes
90 minutes
My EQ...
Normal
Classic
Jazz
Pop
Rock
Speech
Set Time/Date
Auto update
Set 12/24 hour
Set date format
3
Treble
Bass
Update from Any
Update from DAB
Update from FM
No update
Set 12 hour
Set 24 hour
DD-MM-YYYY
MM-DD-YYYY
Backlight
Power on
Standby
Language
Factory Reset
Software Upgrade
SW version
4
Low
High
Low
Medium
High
Thank you for choosing a Hama product. Take your time
and read the following instructions and information
completely. Please keep these instructions in a safe place
for future reference. If you sell the device, please pass
these operating instructions on to the new owner.
3. Safety Notes
• The product is intended for private, non-commercial use
only.
• Protect the product from dirt, moisture and overheating
and use it in dry rooms only.
• As with all electrical devices, this device should be kept
out of the reach of children.
• Do not drop the product and do not expose it to any
major shocks.
• Do not operate the product outside the power limits
given in the specifications.
• Keep the packaging material out of the reach of children
due to the risk of suffocation.
• Dispose of packaging material immediately according to
locally applicable regulations.
• Do not modify the device in any way. Doing so voids the
warranty.
1. Explanation of Warning Symbols and Notes
Risk of electric shock
This symbol indicates product parts energized with a
dangerous voltage of suffi cientmagnitude to constitute
a risk of electric shock.
Warning
This symbol is used to indicate safety instructions or to
draw your attention to specific hazards and risks.
Risk of electric shock
Note
• Do not open the device or continue to operate it if it
becomes damaged.
• Do not use the product if the AC adapter, adapter
cable or power cable is damaged.
• Do not attempt to service or repair the device yourself.
Leave any service work to qualified experts.
This symbol is used to indicate additional information or
important notes.
2. Package Contents
• Digital radio DR1600
• AC/DC adapter
• Quick guide/ Operating instructions
5
4. Informations and notes before getting started
5.2. General notes on use
Note – Optimal reception
Notes on use
• Please note:
• Always pull the antenna out completely.
• We recommend you adjust the antenna vertically to
ensure optimal reception.
• Try various different positions if necessary to get the
best reception.
• When a selection among menu items is to be made
(such as Yes or No), the one currently selected is
marked with < >.
• In menus offering a variety of different options (such
as DRC, Language and so on), the currently selected
option is marked with *.
Navigation and controls
• Select among menu items by turning [enter/navigate].
• Confirm the selection by pressing [enter/navigate].
5. Getting started
5.1 Radio – Connecting and starting up
Connect the network cable to a properly installed and
easily accessible network socket. The power supply unit is
suitable for mains voltages between 100 and 240 V, and
is thus operable on almost any AC power grid. Please note
that a country-specific adapter may be necessary.
You can find an appropriate selection of Hama products at
www.hama.com.
This procedure is indicated in these operating instructions
by the following symbols:
Selection (navigate)
Confirmation (enter)
Note
• Only connect the product to a socket that has been
approved for the device.
• When using a mult-socket power strip, make sure
that the sum power draw of all the connected devices
does not exceed its maximum throughput rating.
• The electrical socket must always be easily accessible.
• If you will not be using the product for a long period
of time, disconnect it from mains power.
Some features can be
accessed by means
of shortcut buttons.
Pressing shortcut buttons
is indicated here by this
symbol.
After pressing a shortcut button, navigate amongst the
menu items using [enter/navigate].
Once the product has been connected to mains power,
initialisation takes place.
Volume adjustment / mute
• You can turn the volume up (right) or down (left) by
turning [volume -/+] / [ ] accordingly.
6
Additional information
Press [info] to display context-dependent additional
information. The information shown depends on the
operating mode as well as the current selection of radio
station.
5.3 Initial setup
A station search in DAB operating mode is automatically
started when you switch the radio on for the first time.
English is the default language for the radio’s menu
structure. Set up your desired language as described in
12.3. Language.
[info]
6. DAB
The radio receives all established digital radio frequencies
in the range of 174 MHz to 240 MHz (band III, channel
5A to 13F).
• After pressing [mode] repeatedly, activate operating
mode DAB:
• Description
Indicates the radio station, the current program,
contents, subjects, etc.
• Program genre/country
Indicates the genre (music style) and the country or
region of the station.
[mode]
• Bit-Rate
The currently received digital bit rate of the received
station is displayed.
6.1 Search/ Automatic search
The automatic DAB channel search scans the DAB band
III for available stations. After the station search, all
interference-free stations are saved in alphabetical order.
In Stations list a ? is displayed in front of the station names
of stations found during a previous scan but which cannot
currently be received.
The automatic DAB station search starts automatically
when DAB mode is started for the first time; it is indicated
by Scanning… and a status bar on the display.
• Codec
Specifies the encoding scheme used to digitise the data
or signal (such as MP3 or WMA).
• Sampling rate
Specifies the sampling rate, or the frequency with which
the audio signal is polled (Sampling-/ Samplerate), in a
certain period of time.
If you would like to start the search again, proceed as
follows:
• Signal strength
The signal strength of the received station is displayed
via a bar and its length.
[menu]
• Today’s date
• Time
• Signal error
Scan
• Service not available
Is displayed if there is currently no DAB reception.
Switching on /off / Standby
• Press [volume -/+] / [ ], to switch the radio on or off
(Standby).
• To completely switch off the device, disconnect it from
the power supply.
6.2 Manual station search
With the manual station search function you can search
through individual frequencies and channels. If you know
the frequency of the desired station and the automatic
station search failed to fi nd it, use this feature to set the
reception frequency directly.
7
Proceed as follows, choosing a frequency range between
5A and 13F:
6.3 Station list
You can access the station list in DAB mode at any time via
two methods:
a) If a station is already playing, simply turn [enter/
navigate]. The radio will then display the station list.
[menu]
b)
[menu]
Manual tune
The bar indicates the current signal strength. The marking
along the bar indicates the value required for interferencefree reception. If this value is not reached (the bar is
empty), then the signal strength is not sufficient on this
channel.
Station list
Note
6.4 Edit station list
To remove stations that are not currently in the reception
area, from your station list, proceed as follows:
• DAB/ DAB+ permits the transmission of several
stations within a single frequency block. When sorting
by ensemble the stations are displayed according to
how they are distributed across the frequency blocks.
[menu]
Edit
If you answer Yes, then all currently unavailable stations
will be removed from the station list.
8
6.5 Presets
You can save up to 10 of your favourite stations for quick
and direct access.
6.6 DRC (Dynamic Range Control)
Some radio stations in the DAB network support an audio
level control that is activated at varying volumes during
playback. If the audio level suddenly rises during playback,
DRC automatically reduces the volume. The same happens
if playback suddenly becomes quieter, with the radio
then increasing the volume. This radio has three different
settings for DRC.
6.5.1 Save favourites
• Set the station that you would like to save as a favourite
station preset.
• If the station is received, press and hold [memory] on
front of the radio.
DRC high: total equalisation of different volumes. Strong
compression can audibly reduce the dynamics of a music
title.
[memory]
DRC low: partial equalisation of different volumes. More
subtle compression, without too much loss of dynamics.
An overview window with the station presets should open
after approx. 2 seconds.
• You can switch between the station presets (1 to 30) by
turning [enter/navigate].
• Press [enter/navigate] to save the station on the
desired station preset.
DRC off: no equalisation.
Proceed as follows to do the settings:
[menu]
6.5.2 Access favourites
Press [memory] to open the overview window with the list
of saved stations.
DRC
[memory]
Use [enter/navigate] to select one of your favourites.
Note
Favourites cannot be deleted.
If all 10 station memory slots are fi lled and you wish to
save a new station, choose one of the occupied slots.
The station in this slot will be overwritten with the new
station.
9
7. FM
After pressing [mode] repeatedly, activate operating mode
FM:
7.2 Automatic station search
• Press and hold [enter/navigate] until the automatic
station search starts.
• The radio stops the search and starts playback when it
finds a station.
• Press [enter/navigate] to continue the search until the
next station is found.
[mode]
7.3 Manual station search
Bei manuellen Sendereinstellungen haben Sie die
Möglichkeit, die gewünschte Frequenz selbst festzulegen
und auch Sender zu empfangen, deren Sendesignal bei der
automatischen Sendersuche zu schwach war und deshalb
nicht berücksichtigt wurde.
• Drehen Sie [enter/navigate] (links: - 0.05 MHz/
rechts: + 0.05 MHz) bis die gewünschte Frequenz
angezeigt wird. Warten Sie einen kurzen Augenblick und
die Wiedergabe des empfangenen Sendesignals beginnt.
7.1 Scan setting
The search run setting allows you to determine whether
stations with low signal strength are ignored during the
automatic search run.
Proceed as follows:
[menu]
7.4 Favoriten
You can save up to 10 of your favourite stations for quick
and direct access.
Scan setting
7.4.1 Save favourites
• Set the station that you would like to save as a favourite
station preset.
• If the station is received, press and hold [memory] on
front of the radio.
• To have the search run stop only at stations with high
signal strength, select Strong stations only. Otherwise,
the search run will stop at every station for which a
signal is received.
[memory]
An overview window with the station presets should open
after approx. 2 seconds.
• You can switch between the station presets (1 to 30) by
turning [enter/navigate].
• Press [enter/navigate] to save the station on the
desired station preset.
10
7.4.2 Access favourites
Press [memory] to open the overview window with the list
of saved stations.
8. Auxiliary Input
Via the analogue audio input (AUX IN socket) you can
connect mobile devices (for example smartphone, tablet
PC, M3 player etc.) to the radio and play the audio files
using the radio´s speakers.
[memory]
• After pressing [mode] repeatedly, activate operating
mode AUX:
Use [enter/navigate] to select one of your favourites.
[mode]
Note
Favourites cannot be deleted.
If all 10 station memory slots are fi lled and you wish to
save a new station, choose one of the occupied slots.
The station in this slot will be overwritten with the new
station.
• Connect your mobile terminal device to the audio in (the
AUX IN socket) of the radio using a 3.5-mm TRS stereo
cable.
• Start and control audio playback using the controls of the
connected terminal device.
7.5 Audio setting
For some stations with a weak signal, quality can be
slightly improved by playing them in mono quality. You can
enable this function (Forced mono) in the menu, and the
radio will automatically switch to mono reception when
signal quality is poor.
To change the audio setting, proceed as follows:
9. Bluetooth
You can pair your terminal device with the radio using
Bluetooth and use it as a playback device. You can control
playback directly on the terminal device. You can adjust the
volume on the radio, as well.
Note – Bluetooth
• Check whether your mobile device (smartphone,
tablet PC. etc.) is Bluetooth capable.
• Note that the maximum range for Bluetooth is 10
metres without obstacles such as walls, people, etc.
• The Bluetooth connection may be disrupted by other
Bluetooth devices/ connections in the vicinity.
• It is only possible to connect the radio to one terminal
device.
• Note that compatibility depends on the supported
Bluetooth profiles as well as the Bluetooth versions
being used. (see Technical Data, operating
instructions of the terminal device in use)
[menu]
Audio setting
After pressing [mode] repeatedly, activate operating mode
Bluetooth:
[mode]
11
9.1 BIuetooth pairing
• Make sure that your Bluetooth capable terminal device is
on and Bluetooth is activated.
• Press and hold [pair] to make the radio visible for other
devices. Bluetooth discoverable will appear on the
dipslay.
Note – Connection impaired
After the radio and terminal device have been paired, a
connection is established automatically. If the Bluetooth
connection is not established automatically, check the
following:
• Check the Bluetooth settings of your terminal device
to see whether DR1600 is connected. If not, repeat
the steps listed under Bluetooth pairing.
• Check whether your terminal device and the radio are
less than 10 metres apart. If not, move them closer
togehter.
• Check whether obstacles are impairing the range. If
so, move the devices closer together.
[pair]
Press and hold
• Open the Bluetooth settings on your terminal device
and wait until DR1600 appears in the list of Bluetooth
devices found.
• If necessary, start searching for Bluetooth devices on your
terminal device.
• Select DR1600 and wait until the radio is listed as
connected in the Bluetooth settings on your terminal
device.
• Your terminal device is also shown as connected on the
radio display.
• Start and control audio playback using the controls of the
terminal device.
10. Sleep
The radio has a sleep function, after a defi ned time the
radio switches to standby mode.
• Repeatedly press [SNOOZE] to set the desired time
interval (Sleep off/15/30/45/60/90/120 minutes).
Note – Bluetooth password
[SNOOZE]
Some terminal devices require a password in order to
connect to another Bluetooth device.
• If your terminal device requests a password for
connection to the radio, enter 0000.
• After the defined time the radio switches to standby
mode.
• Press [volume -/+] / [ ] to turn the radio back on.
• If a time interval is already activated, you can change or
disable it at any time by again pressing [SNOOZE].
9.2 Automatic Bluetooth connection
(after successful pairing)
• Terminal devices already paired with the radio are
automatically saved on the radio.
• If you are pairing the terminal device with the radio for
the first time, proceed as described in 9.1. BIuetooth
pairing.
• Make sure that your Bluetooth capable terminal device is
on and Bluetooth is activated.
• Press [pair] repeatedly until the terminal device you
would like to pair with the radio is shown on the display.
• The devices will be automatically connected.
• If necessary, open the Bluetooth setting on your terminal
device and select DR1600.
• Start and control audio playback using the controls of the
terminal device.
12
11. Alarms
The Radio has two individually adjustable alarm times.
Date:
If you selected Once, enter the date for the one-off alarm.
11.1 Alarm settings
Alarm 1 and alarm 2 are configured identically. Select
Alarm 1 or 2 by repeatedly pressing [alarm] and pressing
[enter/navigate] to confirm, and then make the following
settings by means of [enter/navigate].
Volume:
You can set the volume at which the alarm sound should
be played. This setting makes it irrelevant how loud you
last listened to the radio.
Note
• It is recommended to allow the radio to update the
time automatically. This ensures that the time is
always correct even if there is a separation of power
supply – for example a power cut.
[alarm]
Alarm:
• Select On to configure the alarm settings. The alarm
automaticallly activates once configuration is complete.
• Select Off to deactivate the selected alarm and its
settings.
11.2 Activating/ deactivating the alarm
• Select Alarm 1 or 2 by repeatedly pressing [alarm], and
the option Alarm On/ Alarm Off by pressing [enter/
navigate] to activate/ deactivate the selected alarm
(1/2).
• If an alarm is activated, the corresponding symbol 1 / 2
will be displayed.
On time:
First choose the hour, then the minute at which the alarm
is to activate.
Duration:
Choose a time interval (15/30/45/60/90 minutes). The
alarm remains active for the selected time interval.
11.3 Activate/ deactivate alarm in standby mode
• Press [alarm] in standby mode to display the current
alarm setting.
• Press [alarm] again or rotate [enter/navigate] to
activate/deactivate alarm 1 and/or alarm 2.
• Press [enter/navigate] to confirm your settings.
Source:
Set whether you wish to be woken by an alarm tone
(Buzzer), by DAB or by FM.
11.4 Stopping the alarm/ Snooze function
Preset:
If you selected DAB/ FM, choose which station you wish
to be woken with. You can choose any of the 10 favourite
station slots or the Last listened.
• When the alarm activates, press [volume -/+] / [ ]
to stop the alarm.
• Repeatedly press [SNOOZE] to activate snooze mode.
• The alarm turns off for the selected time interval (5/10
minutes) before activating once again.
• If the alarm is not stopped, the radio automatically
switches to standby mode after the preset time interval
(duration).
Enable:
Choose when the alarm is to activate:
→ Daily – Once – Weekdays – Weekends
13
12. System settings
You can modify all settings and access important
information about the radio in the System settings.
12.2 Time/ Date
To access the time settings, proceed as follows:
[menu]
12.1 Equaliser
The equaliser allows you to adjust the sound of the radio
to suit your preferences by amplifying or reducing the
amount of bass or treble in the audio .
You can choose from preconfigured profiles, adjusted to
suit a variety of music genres, or create your own custom
profile.
System

Time
• To set the Equaliser, proceed as follows:
Auto update
Update from Any/ from DAB/ from FM
If automatic time and date adjustment is activated, the
device receives time and date information from the station
over the FM/DAB/DAB+ radio network. This is the best way
to ensure that the clock will run accurately and the alarm
will trigger at the correct time, even after power outages.
[menu]
System

Equaliser
No update
The time and date (DD-MM-YYYY/MM-DD-YYYY) must
be set manually; no automatic calibration takes place.
• Use [enter/navigate] to choose one of the
preconfigured profiles.
• To create your own equaliser profile, choose the option
My EQ....
• This takes you to the settings for Bass and Treble.
• To adjust a particular value, press [enter/navigate]
at the corresponding menu item and then change the
value by turning [enter/navigate]. If playback is already
started when you modify these settings, you can hear the
changes in the audio immediately.
• Confirm your settings by pressing [enter/navigate] once
more.
• After configuring all the settings, press [menu] on the
radio and confirm the settings.
Set Time/ Date
Set the date (DD-MM-YYYY/MM-DD-YYYY) and time
(hh:mm) manually using [enter/navigate].
Set 12/24 hour
Choose between 12 and 24 hours format.
Set date format
Choose between DD-MM-YYYY and MM-DD-YYYY date
format.
14
12.3 Language
To change the menu language from that selected at firsttime startup, proceed as follows:
12.5 Software update
We are constantly developing new software features
and improvements for our radios to fix problems, add
functionality, etc.
We recommend that you keep your radio’s software up to
date.
[menu]
You can find information on performing an update
separately on the enclosed sheet and/ or you can
download it as a PDF at www.hama.com.
System

Language

Wished Language
z.B. English
12.6 Info
• To have the radio display information about ist software,
proceed as follows:
12.4 Factory Reset
To reset the radio to the factory default settings, proceed
as follows:
[menu]
[menu]
System

SW version
System

Factory reset
12.7 Backlight
The backlight can be confi gured for each operating
mode (Operation Mode, Standby Mode, Slumber Mode)
separately.
• Proceed as follows:
• Confirm the following prompt with Yes to reset the radio
to the factory default settings.
• All settings made previously are deleted.
[menu]
Note
• Resetting to the factory default settings can solve
some problems and malfunctions.
• However, all settings made previously, such as custom
favorites, and station lists are permanently deleted.
System

Backlight
15
• For the operation modes Operation Mode (Power on)
and Slumber mode (Sleep mode), select between various
brightness levels.
• For Standby Mode (Standby), you may also choose a
brightness level for the backlight when the radio is in
standby.
• Choose a time interval for Timeout. When the radio is in
standby, press any button other than [volume -/+] /
[ ] to illuminate the display at the brightness level set
for that operating mode for the selected interval of time.
• Press [alarm], the display will light up, and you can
also display and configure the current alarm setting,
as described in 11.3. Activate/ deactivate alarm in
standby mode.
15. Service and Support
Please contact Hama Product Consulting if you have any
questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
16. Recycling Information
Note on environmental protection:
After the implementation of the European Directive
2002/96/EU and 2006/66/EU in the national legal
system, the following applies: Electric and
electronic devices as well as batteries must not be
disposed of with household waste. Consumers are obliged
by law to return electrical and electronic devices as well as
batteries at the end of their service lives to the public
collecting points set up for this purpose or point of sale.
Details to this are defi ned by the national law of the
respective country. This symbol on the product, the
instruction manual or the package indicates that a product
is subject to these regulations. By recycling, reusing the
matierals or orther forms of utilizing old devices/ batteries,
you are making an important contribution to protecting our
environment.
12.8 AUX: Auto-Standby
In Aux in (Auxiliary Input) operating mode, the radio
switches to standby mode after 15 minutes, by default.
13. Care and Maintenance
• Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents.
• If you do not use the product for a long time, turn off the
device and disconnect it from the power supply. Store it
in a clean, dry place out of direct sunlight.
17. Declaration of Conformity
Hama GmbH & Co. KG hereby declares that the
device complies with the essential requirements
and other relevant provisions of Directive
2014/53/EU. See www.hama.com for the declaration of
conformity with the relevant directive.
14. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no
warranty for damage resulting from improper installation/
mounting, improper use of the product or from failure to
observe the operating instructions and/ or safety notes.
16
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by Hama GmbH & Co KG is under license. Other trademarks and trade names
are those of their respective owners.
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted,
and subject to technical changes. Our general terms of delivery and payment are applied.
00054820/07.16
Hama GmbH & Co KG
86652 Monheim / Germany
www.hama.com
Download PDF

advertising