Hawaiian Shaved Ice S900A Shaved Ice Machine User guide

Add to my manuals
17 Pages

advertisement

Hawaiian Shaved Ice S900A Shaved Ice Machine User guide | Manualzz

Home shaved ice machines, flavors and accessories.

Electric Ice Shaver

Model #S900A

Instruction Manual

1

SAVE THIS MANUAL FOR FUTURE USE

Registration

You may register this ice shaver through our website at www.HawaiianShavedIce.com/register.html

Table of contents

General Warnings------------------------------------------------------------- 3

Usage Precautions------------------------------------------------------------ 7

Warranty------------------------------------------------------------------------- 9

Assembly and Use-------------------------------------------------------------12

Cleaning--------------------------------------------------------------------------14

Shaved Ice Recipes-----------------------------------------------------------15

Mary Mack’s, Inc.

DBA Hawaiian Shaved Ice

321 Goldsboro Street

Newton Grove, NC 28366, USA

1-800-620-2869 – toll free

910-247-4152 – direct

770-234-6333 – fax

© 2015 Mary Mack’s, Inc. DBA Hawaiian Shaved Ice

2

General Warnings and Safeguards

CAUTION

To prevent property damage and personal injury, it is important that you read and follow all general warnings, safeguards and instructions.

Read the instructions provided in this booklet carefully, as they give important information with regards to the assembly, use and maintenance. Preserve this manual carefully for future reference.

This ice shaver is intended for household use only.

This ice shaver has a blade that is extremely sharp. Use extreme caution during assembly, operation, disassembly and while cleaning the unit. If the blade becomes broken or loose, do not use the appliance.

After unpacking the unit and before each use, make sure the mechanical parts of the unit and all its attachments are intact. Look for any foreign objects before operating the ice shaver. In case of doubts, do not use the appliance and refer to the manufacturer.

3

To prevent electrical shock to yourself or others, do not immerse the cord, plugs, motor unit or any other electrical parts in water or other liquids.

Use extreme caution to make sure that you never place your fingers or other items into the machine or the machine’s moving parts.

Do not operate the machine without ice.

Use this appliance for no more than 2 continuous minutes.

Failure to obey this may cause the ice shaver to overheat.

Allow the appliance motor to cool down before repeat usage.

All packing elements (plastic bags, polystyrene, etc.) should be kept out of the reach of children, as they are potentially hazardous.

Before plugging the appliance into a power source, make sure the voltage details marked on the appliance seal/plaque correspond to those of your power supply. The seal/plaque is located on the motor unit.

This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

In the event that the wall socket and the appliance plug are not compatible, have the socket changed by a qualified professional, who must also ensure that the cross section of the socket wiring corresponds to the power consumed by the appliance. Generally speaking, adapters, multiple sockets, extension cords and/or drop cords should not be used.

4

However, if necessary, only use single or multiple adapters and extension cables which comply with the existing safety standards, making sure that the current carrying capacity limits, marked on the single adapter and on the extension cables, as well as the maximum power limit marked on the multiple adapter, are not exceeded.

Do not use the machine around a hot surface or hot appliances. Keep the appliance away from stovetops, broilers, ovens or any other potentially hot appliance. Pay special attention to the electrical cord to prevent it from touching a hot surface.

This appliance must only be used for the purposes it was designed for, i.e. for crushing/shaving ice in the home. Any other use must be considered improper and therefore dangerous. The manufacturer cannot be held responsible for any damages deriving from improper, incorrect and unreasonable uses.

The use of any additional accessory attachments not recommended by Hawaiian Shaved Ice is not suggested.

Failure to obey this warning may cause fire, electric shock or injury to yourself or others.

The use of any electric appliance involves the observance of some basic rules.

In particular:

Never touch the appliance with wet or damp hands.

Never use the appliance barefoot.

5

Never pull the electrical cable or the appliance itself to remove the plug from the electrical socket.

Avoid all contact with any moving parts of the appliance.

Never leave the appliance exposed to the elements (rain, sunshine, etc.).

Never let children or those unable to operate the appliance use it unattended. Do not leave the unit unattended while plugged into a power source.

Before any cleaning, maintenance, assembly or disassembly, make sure that the ice shaver is disconnected from the main power supply by unplugging it.

Should the appliance be out of order and/or operating inefficiently, switch it off and do not attempt to tamper with it.

For any repairs, only approach the manufacturer and request the use of original spare parts. Failure to comply with the above might result in the compromised safety of the appliance.

Should you decide to stop using the appliance, it is advisable to render it unusable by cutting the electrical cable, after unplugging it from the main power supply.

Furthermore, it is also advisable to render all hazardous parts of the appliance harmless, particularly for children, who might play with the discarded appliance.

Installation must be carried out in compliance with the manufactu rer’s instructions. Incorrect installation can cause damage to people, animals or objects for whom the manufacturer may not be held responsible.

6

In order to avoid dangerous overheating, it is advisable to unwind the electrical cable completely and use the appliance as recommended in the “Usage Precautions” paragraph.

Never leave the appliance plugged in when not needed.

Unplug from the power supply plug whenever the appliance is not used.

Never obstruct the openings or slits for ventilation and heat dissipation.

Should the electrical cable of this appliance be damaged, have it replaced only by an after-sales service center authorized by the manufacturer, as special tools are required.

The manufacturer reserves the right to make any changes considered necessary for industrial, commercial or design improvements or to comply with particular standards. It is advisable to pay particular attention to those warnings highlighted with the symbol .

Usage Precautions

Before using this appliance for the first time, or after a long period of disuse, wash the ice molds and the ice crusher cup in warm water with dish soap, rinse and dry thoroughly.

Before each use of the appliance, check that it is mechanically intact. The motor unit, the container cup and the support base must not be cracked or broken in any way.

The sheath and the plug should not be cracked or broken. In the event that they should be, remove the plug immediately

7

from the socket and take the appliance to the manufacturer for the necessary checks.

Before plugging in the appliance, check that the button is in not pressed “on”.

Ensure that the ice shaver and the cable are not too close to the edge of the table or work surface, and that it is not touching heat sources; ensure also that it is not near a sink.

Never immerse the motor unit in water or other liquids.

Ice blocks that have not been made using the molds supplied should never be placed in the container cup. Most ice cubes from residential ice shavers may be used in the ice shaver.

Substances other than ice that have been made using the molds supplied with the appliance should never be place in the container cup.

Never run the appliance while empty.

Never run the appliance before it has been correctly mounted on its base.

Never plac e fingers into the container cup as the blade is very sharp and could cause injury.

Do not damage the blade by introducing metal implements.

Do not attempt to sharpen the blades; if necessary, replacement blades may be purchased.

To avoid overheating, do not run the appliance for longer than 2 consecutive minutes. If you need to crush a large quantity of ice, do so leaving pauses in between.

8

Ice Shaver Specifications

Model S900A, Electric Ice Shaver

Power: 120v, 60 Hz, 55W max

ETL approval

Made in China

Product Warranty

Ice Shaver 1 Year Limited Warranty

Mary Mack’s, Inc. DBA Hawaiian Shaved Ice warrants to the original purchaser that the Hawaiian Shaved Ice Maker (Ice

Shaver) # S900A shall be free from material defects in material and workmanship under normal household use for a period of one (1) year from the original date of purchase provided that all the ice shaver is used in accordance with all general warnings, safeguards and instructions found in this instruction manual.

If the product is determined to be materially defective during the warranty p eriod, your sole remedy and Mary Mack’s, Inc, sole and exclusive liability shall be limited to the repair or replacement of this product with a new or refurbished product at Mary

Mack’s, Inc. option. This warranty does not cover exterior or interior finish or damage caused by misuse, scratching, accident or negligence.

This warranty is extended only to the original purchaser and does not apply to commercial use, or to damage to the product (not resulting from defect or malfunction) while in the possession of the original consumer. Mary Mack’s,

9

Inc, claims no responsibility for consequential, foreseeable, incidental, or commercial losses caused by the use of this product.

If a problem with this ice shaver develops during the warranty period, please contact, Mary Mack’s, Inc for service. Send a brief letter explaining the problem along with a purchase receipt or other proof of date of original purchase will be required before warranty service is rendered. Be sure to include your name, address and phone number.

Any ice shaver submitted for repair must be sent (transportation charges prepaid) to the following authorized repair center:

Mary Mack’s, Inc

Attn: Ice Shaver Repair.

321 Goldsboro Street

Newton Grove, NC 28366

If you have any questions concerning the use and care of this product or comments regarding your experience with the product, we would like to hear from you. Feel free to give us a call at 1-800-620-2869 or email us at

[email protected]

This warranty is only valid in the United States of America and Canada.

10

11

Assembly and use:

1. Always ensure that the appliance is switched off, and that it is not plugged into an electrical outlet before you assemble and dismantle the ice shaver.

2. Fill the ice molds (Figure A. 5) with water. Place the ice molds on a level surface in the freezer until the water is completely frozen. Once frozen you will have a small round block of ice. If needed, additional ice molds may be purchased.

3. Standard household ice cubes that are produced from most residential refrigerators may be used instead of ice blocks however the shaved ice produced from ice cubes will not be as fluffy as shaved ice produced from ice blocks.

4. To assemble the ice shaver, place the support base (Figure A. 1) on your work surface.

5. Insert the ice crusher cup (Figure A. 2) into the support base

(Figure A. 1) ensuring that the ice crusher cup is completely inserted into the support base (Figure A. 1).

6. Position the non-slip mat on the support base (Figure A. 6).

7. Place a small bowl (not supplied) or ice cup (not supplied) on the support base (Figure A. 1) and under the ice crusher cup (Figure

A. 2). The small bowl or ice cup will be used to catch the shaved ice produced by the ice shaver.

8. Take the frozen ice molds out of the freezer. Remove the frozen round ice block from the plastic ice mold.

12

9. For the fluffiest ice, allow the ice blocks or ice cubes to thaw for about 5 -7 minutes before shaving. This will produce a fluffier snow.

10. Place the ice block or ice cubes into the ice crusher cup (Figure

A. 2). Make sure that the ice block is removed from the plastic ice mold before placing into the ice crusher cup (Figure A. 2).

11. During the freezing stage, the block of ice may become domeshaped. If this should happen, place the dome-shaped side of the ice block down into the machine. The flattest side of the ice block should be facing up.

12. Place the motor unit (Figure A. 3) on top of the ice. Plug the ice shaver into an electrical outlet. Gently press and hold the grey on/off button (Figure A. 4) while applying pressure to the top of the motor unit. The motor unit will begin to shave the ice block or ice cubes. To stop the motor unit from shaving, remove your hand from the on/off button (Figure A. 4).

13. Apply your favorite premium HawaiianShavedIce.com shaved ice flavoring and enjoy!

14. Unplug the ice shaver from the electrical outlet immediately after use.

15. After shaving an ice block or ice cubes, a thin block of ice will remain inside the ice crusher cup (Figure A. 2). The remaining ice must be thrown away before a new ice block is inserted into the ice crusher cup (Figure A. 2). When removing the remaining ice block, use caution and pay special attention to the blade and avoid all contact with the blade to prevent injury to yourself or others.

13

Cleaning:

Dismantle the appliance in the reverse order to the procedure described for assembling it.

During cleaning, use caution and pay special attention to the ice shaver blade and avoid all contact with the blade to prevent injury to yourself or others.

Avoid using abrasive detergents or cloths.

The motor unit may be cleaned with a slightly damp cloth but do not soak or immerse the motor unit in water or other liquid.

All the machine parts other than the motor unit (Figure A. 3) may be washed in warm water with a mild soap and rinsed with water, or washed in a top rack of a dishwasher at a temperature no higher than 150°F.

NEVER wash the motor unit (Figure A. 3) in the dishwasher.

Dry all the parts paying particular attention to the blades before putting the appliance away.

14

Have fun with Shaved Ice

There is so much more that you can do with shaved ice than just simply shaving ice in a bowl and adding flavor. Try these great recipes below for fun and easy treats.

The Classic Shaved Ice

– Shave a mountain of fluffy snow into a small bowl or ice cup. Add premium shaved ice flavor from

HawaiianShavedIce.com and enjoy. The flavor will be absorbed into the ice.

Remember that a little flavor goes a long way. You want to eat shaved ice with a spoon not drink it with a straw!

Dipped Delight

– Take a small bowl or ice cup and add a scoop of vanilla or your favorite flavor of ice cream to the bottom of the cup. Shave ice on top of the ice cream and top with your favorite syrup from

HawaiianShavedIce.com. Enjoy the combination treat! A big seller at shaved ice stands all across the country!

Rainbow Shaved Ice

– Shave a mountain of fluffy snow into a small bowl or ice cup. Take two or more flavors and pour over the shaved ice to create a rainbow effect. Try mixing colors like yellow and blue to get a green stripe down the middle. Very popular!

Slush Drinks – Dilute one part shaved ice syrup to three parts water. Add the mixture over a tall cup of shaved ice. Pour just enough syrup mixture to cover the ice to keep it slushy. A great refreshing treat!

Soda Ice

– Nothing helps make your favorite soda more refreshing than a tall cup of shaved ice. Pour your favorite soda over shaved ice and enjoy!

15

Fruit Ice

– Instead of shaved ice syrup or soda, try natural fruit juices, lemonade or even tea over shaved ice. Serve these treats at your next party and it will be a hit!

Mixed Drinks – Instead of having your alcoholic drink on the rocks, try serving it over shaved ice. This also works well with margaritas, smoothies and other frozen drinks!

Shaved Ice Toppings

Sweetened Condensed Milk/Sweet Cream – This is the most popular topping used at shaved ice stands. Purchase a can of sweetened condensed milk from your local grocery store. Then, simply pour a small dose of sweetened condensed milk over your flavored shaved ice treat and enjoy!

Evaporated Milk – If you want to give your shaved ice a creamy flavor, add a dose of evaporated milk over the top of your flavored shaved ice treat. Mix gently with your spoon and enjoy! This is especially great with Vanilla,

Peach, Banana, Pina Colada and Coconut.

Marshmallow Topping

– Add a dab to your next shaved ice treat to make it extra special.

Fresh Fruit – Try adding a fruit garnish to your shaved ice treat to make it tasty! Popular garnishes include cherries, pineapples, bananas, oranges, lemons and limes.

Other Shaved Ice Uses

Use shaved ice to make an ice bed for serving shrimp, seafood or other cold items.

16

Mary Mack’s, Inc.

DBA Hawaiian Shaved Ice

321 Goldsboro Street

Newton Grove, NC 28366, USA

1-800-620-2869

– toll free

910-247-4152 – direct

17

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement