SOLDERING
SYSTEM
SERVICE STATIONS
GS series
DESOLDERING SUCKERS
TP-280AS /200AS
AUTOMATIC DESOLDERING
STATIONS
SVS-800AS/580AS/500AS
PORTABLE DESOLDERING GUNS
TP-100AS/100
DESOLDERING WICKS
CP/CPN series
TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER
LEAD-FREE
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER
SOLDERING STATIONS
DESOLDERING PRODUCTS
SOLDER POTS
SURFACE MOUNT / SMT
SURFACE-MOUNT
PRODUCTS
DESOLDERINGS
SOLDERING
ACCESSORIES
SOLDERING WORK HEATED TOOLS
MATERIALS
HAND TOOLS
6363
SOLDERING
SYSTEM
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE
SOLDERING STATIONS TEMPERATURE-CONTROLLED
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS
SOLDERING STATIONS
SOLDER POTS
SURFACE MOUNT / SMT
PRODUCTS
SERVICE STATION
SVS-800AS
400% MORE SUCTION CAPACITY
With open-valve mechanism
CERAMIC HEATER WITH INTERNAL SENSOR
A wide range for terminals, connectors and flat ICs (soldering & desoldering)
SUPERIOR TEMPERATURE-CONTROL CIRCUIT
To keep the temperature constant during desoldering
ZERO VOLT SWITCH CIRCUIT
Reduces noise during heater ON/OFF
REPLACEABLE CARTRIDGE FILTER
Makes changing the filter easy
REWORK UNIT
The temperature can be set to max 550°C.
SOLDERING UNIT
Good for a wide range of soldering work with
70W heater.
DESOLDERING UNIT
Instant desoldering with open-valve mechanism.
(Please refer to the next page.)
INDIVIDUAL POWER SWITCHES
Along with the main power switch, there
are switches for soldering, desoldering, and
reworking.
SOLDERING WORK
MATERIALS
Nozzles sold
separately.
HEATED TOOLS
HAND TOOLS
Desoldering and reworking operate simultaneously
LEAD
RoHS ANTI
STATIC FREE
ST-76 soldering iron stand
64
INDEPENDENT PUMPS
Omnifunctional machine for soldering,
desoldering and reworking.
SOLDERING
ACCESSORIES
DESOLDERINGS
DESOLDERING PRODUCTS SERVICE STATIONS
(included)
SOLDERING
SYSTEM
SUCTION CAPACITY COMPARISON
The arrow indicates solder residue.
SVS-500AS
SVS-800AS
SPECIFICATIONS
DESOLDERING UNIT
SOLDERING UNIT
MODEL
REWORK UNIT
OPEN-VALVE MECHANISM
Two-stage trigger switch (PAT.P)
Step 1
Pulling the trigger (lightly) activates the first
stage switch. The pump starts, and the air
pressure decreases in the vacuum chamber.
Trigger
Step 2
Next, pulling the trigger fully activates the
second stage. The open-valve will open, and
the solder is sucked up at once by the
negative pressure in the vacuum chamber.
SVS-800AS
220-240V AC 50/60Hz
Voltage
670-760W
Power Consumption
Power Cord Length
1.5m Inlet type
Desoldering Unit
250−450˚C
Temp.
Soldering Unit
200−480˚C
Setting
Range
150-550℃
Rework
Insulation Resistance
Over 10MΩ(500V DC)
Vacuum Pump System
Diaphragm system
Vacuum
- 0.08MPa (-600mmHg)
5-25L /min
Air Flow
Accessories
Cleaning pin TP-100CP-13 / Soldering iron stand ST-76
9.3kg
Total Weight
First stage
switch
CONTROL BOX
Output Voltage
Dimensions
Weight
Solder
Open-valve
mechanism
DESOLDERING UNIT
Vacuum
chamber
220-240V AC / 85W
Ceramaic Heater
1.2m
220 x 155mm
250g (w/o cord, hose )
TP-100N-S5
SOLDERING UNIT
TIP/NOZZLE TEMPERATURE-RECOVERY FEATURES
Nozzle temp.
400
400
Work (Set at 400°C)
300
Work (Set at 450°C)
300
200
200
100
0
Desoldering Unit
100
1
2
3
4
0
5
(min.)
2
4
6
8
(mmHg)
The open-valve allows
the device to reach vacuum pressure of -0.06MP
(approx.-450mmHg) in
only 0.1second. (about 4
times faster than our SVS500AS).
(mmHg)
-760
10
(min.)
400
300
Vacuum
pressure compared with
200
other goot
models
100
0
Input Voltage/Power Consumption
Heater
Hose length between
Handpiece and Control Unit
Length
Weight
220-240V AC / 370-430W
Nichrome Heater
1m
220mm (w/o cord)
180g (w/o nozzle, cord)
This machine does not have vacuum pickup function.
0.1
SVS-800AS
SVS-580AS
0.2
0.3
0.4
0.5
(sec.)
For replacement tips, nozzles, and optional parts, refer to p.56 & p.71
-380
SVS-500AS
0
REWORK UNIT
0.1 0.2 0.3 0.4 0.5 0.6 0.7 (sec.)
SOLDERING WORK HEATED TOOLS
MATERIALS
Vaccum Degree Chart
Solder melted consecutively on 5mm-dia600
land. Approx. 2 sec / land.
(with PX-2RT-B tip, TP-100N-10 nozzle) 500
SOLDERING
ACCESSORIES
Tip temp.
(℃)
500
DESOLDERINGS
Soldering Unit
Input Voltage/Power Consumption
220-240V AC / 70W
Ground Resistance
Less than 2Ω
Leak Voltage
Under 2mV
Heater
Ceramic heater
Cord Length
1.2m
Length
190mm (with PX-2RT-B w/o cord bushing)
Weight
70g (with PX-2RT-B w/o cord )
Standard Tip
PX-2RT-B
SURFACE MOUNT / SMT
PRODUCTS
Input Voltage/Power Consumption
Heater
Cord Length
Dimensions
Weight
Standard Nozzle
Pump
Negative
pressure
(℃)500
SOLDER POTS
Pull trigger
fully
220-240V AC
405(W) × 240(H) × 235(D)mm
8.4kg (w/o cord, hose )
TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER
LEAD-FREE
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER
SOLDERING STATIONS
PRODUCT SPECIFICATIONS / FUNCTIONS
HAND TOOLS
65
SERVICE STATION
SVS-580AS
400% MORE SUCTION CAPACITY
With open-valve mechanism
CERAMIC HEATER WITH INTERNAL SENSOR
A wide range for terminals, connectors and flat ICs
SUPERIOR TEMPERATURE-CONTROL CIRCUIT
To keep the temperature constant during desoldering
ZERO VOLT SWITCH CIRCUIT
Reduces noise during heater ON/OFF
REPLACEABLE CARTRIDGE FILTER
Makes changing the filter easy
SUCTION CAPACITY COMPARISON
The arrow indicates solder residue.
SVS-500AS
OPEN-VALVE MECHANISM
MODEL
Step 1
SVS-580AS
Voltage
Pulling the trigger (lightly) activates the first
stage switch. The pump starts, and the air
pressure decreases in the vacuum chamber.
110V,120V, 220-240V AC 50/60Hz
200W (110V,120V)
270-300W (220-240V)
Trigger
Power Consumption
First stage
switch
Power Cord Length
Temperature Desoldering Unit
Setting Range Soldering Unit
Insulation Resistance
Vacuum Pump System
Vacuum
Step 2
Next, pulling the trigger fully activates the
second stage. The open-valve will open, and
the solder is sucked up at once by the
negative pressure in the vacuum chamber.
Accessories
Solder
Total Weight
Pull trigger
fully
Open-valve
mechanism
Output Voltage
Dimensions
Weight
Pump
Input Voltage/Power Consumption
Heater
Cord Length
Dimensions
Weight
Standard Nozzle
TIP/NOZZLE TEMPERATURE-RECOVERY FEATURES
400
400
Work (Set at 400°C)
300
200
100
100
1
2
3
4
0
5
(min.)
2
4
6
8
10
(min.)
Degree Chart
Solder melted consecutively on 5mm-diaVaccum
land. Approx.
2 sec / land.
600
(with PX-2RT-B tip, TP-100N-10 nozzle)
The open-valve allows
the device to reach vacuum pressure of -0.06MP
(approx.-450mmHg) in
only 0.1second. (about 4
times faster than our SVS500AS).
(mmHg)
-760
110V,120V, 220-240V AC 85W
Ceramaic Heater
1.2m
220 x 155mm
250g (w/o cord, hose )
TP-100N-S5
SOLDERING UNIT
Work (Set at 450°C)
300
200
0
Desoldering Unit
Nozzle temp.
Tip temp.
(℃)
500
110V,120V, 220-240V AC
205(W) x 170(H) x 160(D) mm
3.6kg (w/o cord, hose )
DESOLDERING UNIT
Vacuum
chamber
Soldering Unit
1.5m
250−450˚C
200−480˚C
Over 100MΩ(500V DC)
Diaphragm system
- 0.08MPa (-600mmHg)
Cleaning pin TP-100CP-13
Soldering iron stand ST-76
4.0kg (w/o cord )
CONTROL BOX
Negative
pressure
(℃)500
SVS-580AS
SPECIFICATIONS
Two-stage trigger switch (PAT.P)
DESOLDERINGS
SOLDERING
ACCESSORIES
SOLDERING WORK
MATERIALS
HEATED TOOLS
HAND TOOLS
66
LEAD
RoHS ANTI
STATIC FREE
(mmHg)
SOLDERING
SYSTEM
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE
SOLDERING STATIONS TEMPERATURE-CONTROLLED
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS
SOLDERING STATIONS
Desoldering in an instant, with reduced solder residue! Combines
desoldering gun and temperature-controlled soldering iron in one unit.
SURFACE MOUNT / SMT
PRODUCTS
SOLDER POTS
DESOLDERING PRODUCTS SERVICE STATIONS
500
400
Vacuum
pressure compared with
300
other goot
models
200
110V,120V, 220-240V AC 70W
Input Voltage/Power Consumption
Ground Resistance
Less than 2Ω
Leak Voltage
Under 2mV
Heater
Ceramic heater
1.2m
Cord Length
Length
190mm (with PX-2RT-B w/o cord bushing )
Weight
70g (with PX-2RT-B w/o cord )
Standard Tip
PX-2RT-B
For replacement tips, nozzles, and optional parts, refer to p. 71
100
0
SVS-580AS
0.1
0.2
0.3
0.4
0.5
(sec.)
-380
SVS-500AS
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 (sec.)
ST-76 soldering iron stand
(included)
SOLDERING
SYSTEM
SERVICE STATION
SVS-500AS
RoHS ANTI
STATIC
SPECIFICATIONS
POWERFUL VACUUM
Everything from through-hole to multi-layered PCB
MODEL
CERAMIC HEATER WITH INTERNAL SENSOR
A wide range for terminals, connectors and flat ICs
Voltage
Power Consumption
ZERO VOLT SWITCH CIRCUIT
REPLACEABLE CARTRIDGE FILTER
Makes changing the filter easy
Accessories
1.5m
250−450˚C
200−480˚C
Over 100MΩ(500V DC)
Diaphragm system
- 0.08MPa (-600mmHg)
Cleaning pin TP-100CP-07
Soldering iron stand ST-76
Total Weight
SOLDER POTS
Power Cord Length
Temperature Soldering Unit
Setting Range Desoldering Unit
Insulation Resistance
Vacuum Pump System
Vacuum
Reduces noise during heater ON/OFF
SVS-500AS
110V,120-130V,220-240V AC 50/60Hz
200W (110V,120-130V)
270-300W (220-240V)
TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER
LEAD-FREE
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER
SOLDERING STATIONS
Combines desoldering gun and
temperature-controlled soldering iron in one unit.
4.0kg
SOLDERING UNIT
DESOLDERING UNIT
Soldering Unit
400
400
Work (Set at 400°C)
300
Work (Set at 450°C)
200
100
100
2
3
4
0
5
(min.)
Solder melted consecutively on
5mm-dia land. Approx. 2 sec / land.
(with PX-2RT-B tip, TP-100N-10
nozzle)
(mmHg)
1
600
2
4
Input Voltage/Power Consumption
Heater
Cord Length
Dimensions
Weight
Standard Nozzle
110-130V, 220-240V AC / 85W
Ceramic Heater
1.2m
220 x 155mm
250g (w/o cord, hose )
TP-100N-10
SOLDERING UNIT
300
200
0
Desoldering Unit
Nozzle temp.
(℃)
500
DESOLDERING UNIT
6
8
Vaccum Degree Chart
10
(min.)
500
110-130V, 220-240V AC / 70W
Input Voltage/Power Consumption
Ground Resistance
Less than 2Ω
Leak Voltage
Under 2mV
Heater
Ceramic heater
Cord Length
1.2m
Length
190mm (with PX-2RT-B w/o cord bushing)
Weight
70g (with PX-2RT-B w/o cord )
Standard Tip
PX-2RT-B
For replacement tips, nozzles, and optional parts, refer to p. 71
400
300
200
100
0
0.1
0.2
0.3
0.4
HAND TOOLS
0.5
(sec.)
SOLDERING WORK HEATED TOOLS
MATERIALS
Tip temp.
(℃)500
110V,120-130V,220-240V AC
205(W) x 170(H) x 160(D) mm
3.6kg (w/o cord, hose )
SOLDERING
ACCESSORIES
TIP/NOZZLE TEMPERATURE-RECOVERY FEATURES
Output Voltage
Dimensions
Weight
DESOLDERINGS
lBuilt-in powerful and compact twin pump. lWhen
trigger is pulled, the heater heats up forcibly, reducing
temperature decrease. lAfter trigger release, the pump
operates for approx. 0.5 seconds more, reducing solder
clogs.
CONTROL BOX
SURFACE MOUNT / SMT
PRODUCTS
lStable temperature with excellent heat speed & heat
recovery. lGood for a wide range of soldering work, for
terminals, connectors, and flat ICs.
ST-76 soldering iron stand
(included)
67
SOLDERING
SYSTEM
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE
SOLDERING STATIONS TEMPERATURE-CONTROLLED
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS
SOLDERING STATIONS
SOLDER POTS
DESOLDERING PRODUCTS AUTOMATIC DESOLDERING STATIONS
New open-valve mechanism achieves unrivalled
vacuum power and start-up speed.
TP-280AS
Reduces noise during heater ON/OFF
REPLACEABLE CARTRIDGE FILTER
Makes changing the filter easy
SUCTION CAPACITY COMPARISON
The arrow indicates solder residue.
TP-200AS
OPEN-VALVE MECHANISM
MODEL
Step 1
TP-280AS
Voltage
Pulling the trigger (lightly) activates the first
stage switch. The pump starts, and the air
pressure decreases in the vacuum chamber.
Power Consumption
Trigger
Power Cord Length
Temperature Setting Range
Insulation Resistance
Vacuum Pump System
Vacuum
Step 2
Next, pulling the trigger fully activates the
second stage. The open-valve will open, and
the solder is sucked up at once by the
negative pressure in the vacuum chamber.
First stage
switch
Accessories
Total Weight
SURFACE MOUNT / SMT
PRODUCTS
Pull trigger
fully
Output Voltage
Dimensions
Weight
DESOLDERING UNIT
Vacuum
chamber
NOZZLE TEMPERATURE-RECOVERY FEATURES
110-120V, 220–240V AC / 85W
Ceramic Heater
1.2m
220×155mm
250g (w/o hose )
TP-100N-S5
Nozzle temp.
For replacement nozzles, and optional parts, refer to p. 71
200
100
0
Work (Set at 450°C)
300
200
Input Voltage/Power Consumption
Heater
Cord Length
Dimensions
Weight
Standard Nozzle
Desoldering Unit
400
Work (Set at 400°C)
300
100
1
2
3
The open-valve allows
the device to reach vacuum pressure of -0.06MP
(approx.-450mmHg) in only
0.1second. (about 4 times
faster than our TP-200AS).
4
0
5
(min.)
(mmHg)
-760
2
4
6
8
Vaccum Degree Chart
10
(min.)
Vacuum
600 pressure compared with
other500
goot models
(mmHg)
Tip temp.
(℃)
500
110V, 120V, 220–240V AC
95(W)x205(H)x256(D)mm
2.6kg (w/o cord, hose )
Pump
Negative
pressure
SolderSoldering
meltedUnit
consecutively on
5mm-dia land. Approx. 2 sec /
400
land. (with TP-100N-10 nozzle)
110V,120V, 220–240V AC 50/60Hz
130W (110V,120V)
170-200W (220-240V)
1.5m
250−450˚C
Over 100MΩ(500V DC)
Diaphragm system
- 0.08MPa (-600mmHg)
Cleaning pin TP-100CP-13
Soldering iron stand ST-76
Approx. 2.9kg (w/o cord, hose )
CONTROL BOX
Open-valve
mechanism
(℃)500
TP-280AS
SPECIFICATIONS
Two-stage trigger switch (PAT.P)
DESOLDERINGS
SOLDERING
ACCESSORIES
SOLDERING WORK
MATERIALS
HEATED TOOLS
HAND TOOLS
CERAMIC HEATER WITH INTERNAL SENSOR
A wide range for terminals, connectors and flat ICs
SUPERIOR TEMPERATURE-CONTROL CIRCUIT
To keep the temperature constant during desoldering
ZERO VOLT SWITCH CIRCUIT
Solder
68
400% MORE SUCTION CAPACITY
With open-valve mechanism
LEAD
RoHS ANTI
STATIC FREE
400
300
TP-280AS
SVS-580AS
200
-380
100
0
0.1
0.2
TP-200AS
SVS-500AS
0
0.3
0.4
0.5
(sec.)
0.1 0.2 0.3 0.4 0.5 0.6 0.7 (sec.)
ST-76 soldering
iron stand
(included)
SOLDERING
SYSTEM
POWERFUL VACUUM
Everything from through-hole to multi-layered PCB
RoHS ANTI
STATIC
TP-200AS
CERAMIC HEATER WITH INTERNAL SENSOR
A wide range for terminals, connectors and flat ICs
ZERO VOLT SWITCH CIRCUIT
Reduces noise during heater ON/OFF
REPLACEABLE CARTRIDGE FILTER
Makes changing the filter easy
POWERFUL VACUUM
SPECIFICATIONS
l Built-in powerful and compact twin pump. lWhen trigger
is pulled, the heater heats up forcibly, reducing temperature
decrease. lAfter trigger release, the pump operates for
approx. 0.5 seconds more, reducing solder clogs.
MODEL
TP-200AS
Voltage
Power Consumption
Accessories
NOZZLE TEMPERATURE-RECOVERY FEATURES
Nozzle temp.
Work (Set at 450°C)
200
100
100
1
2
3
4
0
5
(min.)
4
6
8
Vaccum Degree Chart
10
(min.)
500
Input Voltage/Power Consumption
Heater
Cord Length
Dimensions
Weight
Standard Nozzle
110-130V, 220–240V AC / 85W
Ceramic Heater
1.2m
220×155mm
250g (w/o cord, hose )
TP-100N-10
400
300
200
0
0.1
0.2
0.3
0.4
0.5
(sec.)
SOLDERING WORK HEATED TOOLS
MATERIALS
For replacement nozzles, and optional parts, refer to p. 71
100
SOLDERING
ACCESSORIES
600
2
110V,120-130V, 220–240V AC
95(W)x205(H)x256(D)mm
2.6kg (w/o cord, hose )
DESOLDERING UNIT
300
200
0
Output Voltage
Dimensions
Weight
Desoldering Unit
400
Work (Set at 400°C)
300
(mmHg)
Tip temp.
(℃)
500
DESOLDERINGS
Soldering Unit
melted consecutively on
5mm-dia land. Approx. 2 sec / land.
400
(with TP-100N-10 nozzle)
Solder
500
(℃)
CONTROL BOX
SURFACE MOUNT / SMT
PRODUCTS
Weight
SOLDER POTS
Power Cord Length
Temperature Setting Range
Insulation Resistance
Vacuum Pump System
Vacuum
110V,120-130V, 220–240V AC 50/60Hz
130W (110V,120-130V)
170-200W (220-240V)
1.5m
250−450˚C
Over 100MΩ(500V DC)
Diaphragm system
- 0.08MPa (-600mmHg)
Cleaning pin TP-100CP-07
Soldering iron stand ST-76
Approx. 2.9kg (w/o cord, hose )
TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER
LEAD-FREE
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER
SOLDERING STATIONS
Perfect for desoldering through-hole and
multi-layered PCBs.
HAND TOOLS
ST-76 soldering
iron stand
(included)
69
SOLDERING
SYSTEM
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE
SOLDERING STATIONS TEMPERATURE-CONTROLLED
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS
SOLDERING STATIONS
SOLDER POTS
SURFACE MOUNT / SMT
PRODUCTS
DESOLDERING PRODUCTS PORTABLE DESOLDERING GUNS
Handy, portable Desoldering Gun with combined
temperature-control circuit and desoldering mechanism
PORTABLE DESOLDERING GUNS
TP-100AS/ 100
RoHS ANTI
STATIC
TP-100AS
POWERFUL VACUUM
Everything from through-hole to multi-layered PCB
CERAMIC HEATER WITH INTERNAL SENSOR
A wide range for terminals, connectors and flat ICs
ZERO VOLT SWITCH CIRCUIT
Reduces noise during heater ON/OFF
REPLACEABLE CARTRIDGE FILTER
Makes changing the filter easy
TP-100/100AS FEATURES
Easy to Use
Compact design with an internal motor, pump, and
temperature-control circuit built into the grip. Portable
and efficient.
Powerful Vacuum
Carry case included.
Can be set from 250-450°C.
Maximum vacuum of –0.08Mpa (-600mmHg). Removes
through-hole solder easily.
Variable Temperature Setting
Sensor feedback system allows temperature setting from
250-450°C.
Replaceable Cartridge Filter
DESOLDERINGS
Makes changing the filter easy.
Anti-static Model
TP-100AS
SPECIFICATIONS
HAND TOOLS
HEATED TOOLS
SOLDERING WORK
MATERIALS
SOLDERING
ACCESSORIES
MODEL
70
Voltage
Power Consumption
Power Cord Length
Temperature Setting Range
Insulation Resistance
Vacuum Pump System
Vacuum
Heater
Standard Nozzle
Accessories
Dimensions
Weight
TP-100
TP-100AS
110–130V, 220–240V AC 50/60Hz
80W (110-130V), 70–75W (220-240V)
1.5m
250–450˚C
Over 100MΩ(500V DC)
Diaphragm system
- 0.08MPa (-600mmHg)
Ceramic Heater
TP-100N-10
Cleaning pin TP-100CP-07/ Filter TP-100F
Carry case
Heat resistant pipe /Stand
225×170 mm
470g (w/o cord)
Carry case with heat resistant
pipe that allows the gun to be
stored immediately after use.
Also includes stand to rest the
gun.
For replacement nozzles, and optional parts, refer to p. 71
SOLDERING
SYSTEM
RoHS
SVS-800AS/580AS/500AS
PX-2RT-B
5
φ
5.
15
12
45° 15
12
4
*Desoldering Unit for SVS-800AS/SVS-580AS
TP-28GAS
Desoldering Unit for SVS-500AS
TP-20GAS
Heater for Desoldering Gun
TP-100H
Heater Barrel for Desoldering Gun
TP-100HP
1
4
REPLACEMENT PARTS FOR SVS-800AS/580AS/500AS
PX-2RT-BC
R0
.3
R0
.5
φ2.5
φ
5.
5
15
13
10
4
φ
5.
5
PX-2RT-SB
PX-2RT-2BC
PX-2RT-3BC
φ
5.
5
PX-2RT-4C
45° 15
12
PX-2RT-5C
*TP-28GAS Desoldering Unit is not interchangeable with TP-20GAS
(SVS-500, SVS-500AS, SVS-550AS)
45° 16
φ3
φ4
φ
5.
5
φ
5.
5
45° 15
13
10
0.5
φ2.4
1
15
5.1
2
φ
5
5
15
12
PX-2RT-8S
15
13
REPLACEMENT PARTS FOR TP-100/100AS
45˚
Heater
TP-100H
16
13.5
COMMON PARTS
37
φ7
4
φ
5
φ
8
3
45°
Cleaning Pin Vice
φ
5.
5
15
13
10
5
PX-2RT-5CR
45°
φ
5
15
12
6
φ4
Round solder-plated type
7
16
φ5
φ
5.
5
45°
REPLACEMENT NOZZLES
RoHS
SVS-800AS/580AS/500AS/TP-280AS/TP-200AS/TP-100(AS)
TP-100N-15
Felt B
20
12
Steel Wool
10
15
φ8.0
φ2.5
φ1.5
φ8.0
φ2.5
φ1.0
20
08
φ8.0
φ2.5
φ0.8
12
Filter Set TP-100F
Felt A
SOLDERING
ACCESSORIES
20
12
TP-100N-10*2
ø0.7mm (for ø0.8 & 1.0mm nozzle)
TP-100CP-07
ø1.3mm (for ø1.5 & 2.5mm nozzle)
TP-100CP-13
DESOLDERINGS
TP-100PV
Drill Bit ø0.7mm
TP-100DB-07
Drill Bit ø0.9mm
TP-100DB-09
Drill Bit ø1.4mm
TP-100DB-14
Drill Bit ø2.4mm
TP-100DB-24
Standard type
PX-2RT-4CR
Cleaning Pin
Pin vice body (The drill bit is not included.)
φ3
15
13
10
4
(3pcs)
Cartridge Set TP-100K
S5
S1
25
20
14
20
77.5
20
14
77.5
φ8.0
12
Cartridge
Steel
Wool
Felt A
Felt B
(1pcs)
Cleaning Pin
Overall View (Standard)
φ6.4
S8
φ6.4
φ1.6
φ0.8
TP-100N-S8
20
14
TP-100N-S5*
φ6.4
φ2.5
φ1.5
20
14
φ6.4
φ2.2
φ1.0
20
12
TP-100N-S1
1
Soldering Iron Unit SVS-800AS, SVS-580AS, SVS-500AS
Collar
Overall View (Slim)
Heater Barrel
Tip
Spacer
SOLDERING WORK HEATED TOOLS
MATERIALS
φ9.5
φ4.0
φ2.5
TP-100N-25
SURFACE MOUNT / SMT
PRODUCTS
φ2.1
φ
5.
5
45°
PX-2RT-3CR
Steel Wool Only (3pcs)
TP-100UL
Felt B (10pcs)
TP-100RFT
SOLDER POTS
ROUND SOLDER-PLATED TIP
PX-2RT-2CR
Filter
Filter Set (3pcs)
TP-100F
Cartridge Set
TP-100K
PX-2RT-B
TP-100N-08
Heater Barrel
TP-100HP
PX-2RT-6E
Overall View
1.2
Desoldering Unit for TP-200AS
TP-20GAS
Heater Barrel
TP-100HP
*TP-28GAS Desoldering Unit is not interchangeable with TP-20GAS
(TP-200, TP-200AS, TP-250AS)
PX-2RT-5K
φ5
5
PX-2RT-5D
φ
5.
0.5
4.2
˚
90
φ
φ4 5.5
PX-2RT-4D
*Desoldering Unit for TP-280AS
TP-28GAS
Heater
TP-100H
15
12
φ3.2
3.3
5
0.5
PX-2RT-3.2D
φ
5.
15
12
5
15
12
φ1.6
φ
5.
2.2
REPLACEMENT PARTS FOR TP-280AS/200AS
PX-2RT-2.4D
φ
5.
5
PX-2RT-1.6D
0.5
45° 15
13
10
Soldering Iron Unit (common for SVS series)
SVS-50GAS
Heater for Soldering Iron
SVS-500H-1
Heater Barrel for Soldering Iron
TQ-77HP(S)
Spacer for Soldering Iron
TQ-77SS
Collar for Soldering Iron
TQ-77NUT
φ
5
PX-2RT-3C
PX-2RT-2C
φ2.1
φ
6
45° 13
8
5
3.2
2.2
φ
6
45° 13
8
4
REPLACEMENT PARTS / OPTIONS
TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER
LEAD-FREE
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER
SOLDERING STATIONS
REPLACEMENT TIPS
Heater
HAND TOOLS
*1Model SVS-800AS, SVS-580AS, TP-280AS Standard Nozzle : TP-100N-S5
*2Model SVS-500AS, TP-200AS , TP-100(AS) Standard Nozzle : TP-100N-10
71
SOLDERING
SYSTEM
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE
SOLDERING STATIONS TEMPERATURE-CONTROLLED
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS
SOLDERING STATIONS
SOLDER POTS
SURFACE MOUNT / SMT
PRODUCTS
RMA base flux.
RoHS MSDS
DESOLDERING WICKS
CP/CPN series
FOR LEAD-FREE
DESOLDERING
FOR LARGE QUANTITY
DESOLDERING
Our thin and soft desoldering
wire’s flat braid has ef ficient
thermal transmission. Removes
solder faster with better heat
response than previous wicks.
Recommended for lead-free
solder with high heating load.
Available in widths of
1.5/2.5/3.5/4.5mm.
The wicks are woven cylindrically.
Plain knitting
Tubular knitting
CONVENTIONAL DISPENSER PACK
DISPENSER PACK WITH STAINLESS STEEL MOUTH
lHigh-quality desoldering wick with braided copper wire,
saturated with non-chlorine special flux. lCan be used for
precision PCBs safely.
lCan be used for precision PCBs safely. lErgonomic
design will keep your fingers cool.
MODEL
CP-1515
CP-2015
CP-2515
CP-3015
CP-3515
CP-4515
Type
Tubular Knitting
Plain Knitting
Tubular Knitting
Plain Knitting
Tubular Knitting
Tubular Knitting
Width
Approx. 1.5mm
Approx. 2.0mm
Approx. 2.5mm
Approx. 3.0mm
Approx. 3.5mm
Approx. 4.5mm
Length
Approx. 1.5m
MODEL
CP-15Y
CP-20Y
CP-25Y
CP-30Y
CP-35Y
Type
Tubular Knitting
Plain Knitting
Tubular Knitting
Plain Knitting
Tubular Knitting
Width
Approx. 1.5mm
Approx. 2.0mm
Approx. 2.5mm
Approx. 3.0mm
Approx. 3.5mm
Length
Approx. 2m
ECONOMICAL PACKS OF 10PCS
BULK-LENGTH SPOOL
lWith convenient zipper bag. lContains silica gel to
reduce quality degradation.
lBargain extra-long wicks with spool. lMakes it easy to
take anywhere.
HAND TOOLS
HEATED TOOLS
SOLDERING WORK
MATERIALS
SOLDERING
ACCESSORIES
DESOLDERINGS
DESOLDERING PRODUCTS DESOLDERING WICKS
72
MODEL
CP-1515-10
CP-2015-10
CP-2515-10
CP-3015-10
CP-3515-10
CP-4515-10
Type
Tubular Knitting
Plain Knitting
Tubular Knitting
Plain Knitting
Tubular Knitting
Tubular Knitting
Width
Approx. 1.5mm
Approx. 2.0mm
Approx. 2.5mm
Approx. 3.0mm
Approx. 3.5mm
Approx. 4.5mm
Length
Approx. 1.5m
MODEL
CP-15B
CP-20B
CP-25B
CP-30B
CP-35B
CP-45B
Type
Tubular Knitting
Plain Knitting
Tubular Knitting
Plain Knitting
Tubular Knitting
Tubular Knitting
Width
Approx. 1.5mm
Approx. 2.0mm
Approx. 2.5mm
Approx. 3.0mm
Approx. 3.5mm
Approx. 4.5mm
Length
Approx. 30m
Approx. 30m
Approx. 20m
Approx. 20m
Approx. 15m
Approx. 13m
SOLDERING
SYSTEM
lAvailable in packs of 10 only.
lDoes not intentionally contain halogens.
lRMA non-wash flux is used. (J-STD-004: ROLO)
lPlain-knitting wick recommended for lead-free
applications with high heat conduction.
lAnti-static case.
lContains silica gel to reduce quality degradation.
lWith convenient zipper bag.
RoHS MSDS ANTI
STATIC
Type
Width
Length
Quantity
MODEL
CPN-2015-10 Plain Knitting Approx. 2.0mm
Approx. 1.5m 10pcs/ Pack
CPN-3015-10 Plain Knitting Approx. 3.0mm
HALOGEN-FREE
Less than 1,000 ppm each of chlorine, bromine, fluorine and
iodine content (JEITA Standards)
TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER
LEAD-FREE
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER
SOLDERING STATIONS
HALOGEN-FREE DESOLDERING WICKS CPN SERIES
Rosin
1.5mm
for LEAD-FREE
2.5mm
3.0mm
for LEAD-FREE
3.5mm
4.5mm
CPN-2015-10
1.5m
10
CPN-3015-10
10
CP-1515
CP-1515-10
1
10
CP-2015
CP-2015-10
1
10
CP-2515
CP-2515-10
1
10
CP-3015
CP-3015-10
1
10
CP-3515
CP-3515-10
1
CP-15Y
1
10
1
CP-20Y
1
1
CP-30Y
1
CP-35Y
1
CP-45B
13m
15m
CP-35B
CP-25B
1
1
CP-30B
CP-15B
1
1
1
CP-20B
1
SOLDERING WORK HEATED TOOLS
MATERIALS
CP-25Y
20m
SOLDERING
ACCESSORIES
10
CP-4515
CP-4515-10
RMA flux
2.0m
DESOLDERINGS
1.5m
30m
Quantity
SURFACE MOUNT / SMT
PRODUCTS
HALOGEN-FREE
Length
SOLDER POTS
Width
2.0mm
HAND TOOLS
73
Manual pumps suck up solder.
Plunger pumps are light, strong, and economical.
SELF-CLEANING SHAFT
When the plunger is pushed, a piston extends out the nozzle. This prevents solder build-up.
ng
mi
p
se
um
cu
Va tton
u
b
ng
mi
e
rel
ea
rel
ANTI-STATIC MATERIAL
On the nozzle
er
n
mi
Pri
lu
gp
aft
Sh
GS-158
r
plu
e
ng
RoHS
SELF-CLEANING SHAFT
To prevent solder clogs
Pri
ft
ha
S
ANTI-STATIC MATERIAL
On the nozzle
GS-100 RoHS
SELF-CLEANING SHAFT
To prevent solder clogs
JUMBO SIZE
Large vacuum capacity
PLUNGER LOCK FUNCTION
Portable, compact storage
SPECIFICATIONS
GS-104
MODEL
RoHS
SELF-CLEANING SHAFT
To prevent solder clogs
Color
Length
When Stored
Weight
Diameter
Applicable Nozzle
PLUNGER LOCK FUNCTION
Portable, compact storage
MODEL
Color
Length
When Stored
Weight
Diameter
Applicable Nozzle
RoHS
GS-100
GS-104
330mm
240mm
89g
ø23mm
ivoly
275mm
205mm
65g
ø19mm
GS-108
190mm
−
25g
ø14mm
GS-108N
GS-100N
GS-150
GS-154
330mm
240mm
89g
ø23mm
Black
275mm
205mm
65g
ø19mm
GS-158
190mm
−
25g
ø14mm
GS-158N
GS-150N
SELF-CLEANING SHAFT
To prevent solder clogseasy
REPLACEMENT NOZZLES
GS-100N
GS-158N
PLUNGER LOCK FUNCTION
Portable, compact storage
JUMBO SIZE
Large vacuum capacity
ANTI-STATIC MATERIAL
On the nozzle
12.4
13.5
φ3.2
SELF-CLEANING SHAFT
To prevent solder clogs
GS-150N
12.4
φ2.6
RoHS
GS-108N
13.5
φ3.2
GS-150
φ2.6
SOLDERING
SYSTEM
SURFACE MOUNT / SMT
PRODUCTS
DESOLDERINGS
e
as
um
cu
Va tton
bu
PLUNGER LOCK FUNCTION
Portable, compact storage
ng
er
Pri
SELF-CLEANING SHAFT
To prevent solder clogs
PLUNGERngLOCK
FUNCTION
er
lu
gp
inplunger
The
can
be stored inside
m
i
Pr
the shaft by pushing it in completely, and pressing the vacuum release
button. Compact storage.
g
lun
SOLDERING
ACCESSORIES
SOLDERING WORK
MATERIALS
HEATED TOOLS
HAND TOOLS
RoHS
GS series
GS-108
74
GS-154
DESOLDERING SUCKERS
SOLDER POTS
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE
SOLDERING STATIONS TEMPERATURE-CONTROLLED
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS
SOLDERING STATIONS
DESOLDERING PRODUCTS DESOLDERING SUCKERS
Download PDF