Spin-On Protection At The Pump 315OR, 325OR

FUEL DISPENSING
Spin-On Protection At The Pump
Start protecting your engine investment right
at the pump. Racor’s Fuel Dispensing Filters
are essential for stationary and overhead
tanks and mobile service vehicles. With their
easy-to-install heads, they remove virtually
100% of the contaminants from diesel fuel.
Racor FDW elements feature a superabsorbent, chemically-treated media that
absorbs 25 times its weight in water, “locking
it in” as a barrier against free and emulsified
water. There is no bypass valve which ensures
that fuel is completely protected. As the media
swells, it significantly reduces the fuel flow
rate, signaling a need to replace the element.
Racor offers filter protection down to 25
microns. Flow rates range from 15 to 100 gpm.
Element service is clean and easy – there’s no
cartridge to replace – just spin-on a new
Racor filter element.
Fuel dispensing
filters can be
used with diesel
fuel or gasoline.
Filter Heads
Part No.
HH07500
FDH12500
FDW125DD
Port Size
Element
Element Thread
Flow Rate
3/4" NPT
FDW 3525 / 3825
1" – 12 UNF
15 gpm / 57 lpm
1 1/4" NPT
FDW 51125
1 1/2" – 16 UNF
50 gpm / 176 lpm
1 1/2" NPT
FDW 51125(2)
1 1/2" – 16 UNF
100 gpm (Dual unit) / 375 lpm
Water Removing Filter Elements
Part No.
FDW 3525
FDW 3825
FDW 51125
Nominal Micron
Rating
Element Size
Element Thread
Application
25
25
25
3.7 D x 5.5 L
1" – 12 UNF
Marinas
3.7 D x 8.0 L
1" – 12 UNF
Marinas
5.0 D x 11.0 L
1 1/2" – 16 UNF
Marinas
Maximum operating pressure of Fuel Dispensing Filter Heads and Water Removing Filters is 100 PSI (690kPa).
10-micron elements available through special order.
FBO-10 and FBO-14
Racor’s new FBO-10 and FBO-14
filter assemblies are designed to
meet the toughest hydrocarbon
refueling conditions and provide
for ease of filter change-outs.
The FBO assemblies can handle
flow rates from 18-50 depending on element specified, the
elements installed and fuel being filtered. White painted
versions are available, consult factory.
Fuel Dispensing Filters utilize water-repelling
30-micron Aquabloc II media and a see-thru
bowl. The assembly can be hard plumbed
directly to the fuel dispenser. Flow rates
from 150-250 gallons per hour.
Drain.
Element Applications
Specifications
Micron Rating Micron FBO-10
FBO-14
Flow Rate GPM
6 x 10 Element 6 x 14 Element Diesel Gas
12
315OR, 325OR, 8250D
Easy-to-service
without tools.
Filter Separator
1
FBO-60327
FBO-60336
18
45
Filter Separator
5
FBO-60328
FBO-60337
18
45
Filter Separator
10
FBO-60353
FBO-60356
18
45
Filter Separator
25
FBO-60329
FBO-60338
18
45
Prefilter
1
FBO-60330
FBO-60339
20
50
Prefilter
5
FBO-603331
FBO-60340
20
50
Prefilter
10
FBO-60356
FBO-60357
20
50
Prefilter
25
FBO-60332
FBO-60341
20
50
Absorptive Filter
1
FBO-60333
FBO-60342
18
45
Absorptive Filter
5
FBO-60334
FBO-60343
18
45
Absorptive Filter
10
FBO-60355
FBO-60358
18
45
Absorptive Filter
25
FBO-60335
FBO-60344
18
45
Part No.
315OR
325OR
Maximum
Flow Rate
150 gph / 568 lph
250 gph / 946 lph 250 gph / 946l ph
Maximum
Working Pressure
8250D
15 PSI / 103 kPa
Filter Element
N/A
N/A
S3207
Port Sizes
Height
Width
Depth
Weight
7/8"-14 SAE
7/8"-14 SAE
1 1/4" NPT
13.63" / 346 mm
5.00" / 127 mm
5.5" / 140 mm
3.6 lbs / 1.63 kg
17.25" / 438 mm
5.00" / 127 mm
5.5" / 140 mm
4.6 lbs / 2.08 kg
16" / 411mm
5.3" / 135 mm
5.3" / 135 mm
Clean Pressure Drop
.68 PSI / 4.7 kPa
1.0 PSI / 6.9 kPa
1.0 PSI / 6.9 kPa
Bowl/Sump
Water Capacity
82 ml
82 ml
82 ml
Operating Temp.
-23˚ to 82˚ C
-10˚ to 180˚ F
-10˚ to 180˚ F
-10˚ to 180˚ F
3.1 lbs / 1.4 kg