K 28202 D edt_cs_ws DE-gb

Operating and installation instructions
Refrigerator
To avoid the risk of accidents or damage to the appliance it is essential
to read these instructions before it is installed and used for the first time.
en-GB
M.-Nr. 10 538 950
Contents
Warning and Safety instructions.......................................................................... 4
Caring for the environment ................................................................................ 12
How to save energy............................................................................................. 13
Guide to the appliance ........................................................................................ 15
Accessories ......................................................................................................... 17
Accessories supplied ............................................................................................ 17
Optional accessories............................................................................................. 17
Side-by-side fitting kit ...................................................................................... 17
Switching on and off ........................................................................................... 19
Before using for the first time ................................................................................ 19
Connecting the appliance ..................................................................................... 19
Operating the appliance ........................................................................................ 19
Switching on..................................................................................................... 19
Switching off..................................................................................................... 20
Switching off for longer periods of time ................................................................ 20
The correct temperature..................................................................................... 21
. . . in the refrigerator section ................................................................................ 21
Temperature display .............................................................................................. 21
Setting the temperature......................................................................................... 22
Using Super cool and DynaCool ........................................................................ 23
SuperCool function ............................................................................................... 23
DynaCool function................................................................................................. 24
Door alarm ........................................................................................................... 25
Selecting further settings ................................................................................... 26
Temperature display brightness ........................................................................... 26
To change the brightness of the temperature display ...................................... 26
Safety lock  ....................................................................................................... 27
To activate the lock .......................................................................................... 27
To deactivate the lock ...................................................................................... 27
Storing food in the refrigerator section............................................................. 28
Different storage zones ......................................................................................... 28
Food which is not suitable for storage in the refrigerator section ......................... 29
When shopping for food........................................................................................ 29
Storing food correctly............................................................................................ 30
2
Contents
Adjusting the interior fittings.............................................................................. 31
Moving the shelves................................................................................................ 31
Moving split shelves .............................................................................................. 31
Adjusting the door shelf / bottle shelf ................................................................... 32
Adjusting or removing the bottle holder ................................................................ 32
Adjusting the bottle rack ....................................................................................... 32
Removing and replacing the fruit and vegetable drawer....................................... 33
Replacing the drawer ....................................................................................... 33
Defrosting............................................................................................................. 34
Cleaning and care ............................................................................................... 35
Cleaning agents..................................................................................................... 35
Preparing the appliance for cleaning..................................................................... 36
Cleaning the interior and accessories ................................................................... 37
Cleaning the front of the appliance and the side panels....................................... 38
Stainless steel appliances ................................................................................ 38
Cleaning the ventilation gaps ................................................................................ 38
Cleaning the compressor and metal grille at the back of the appliance ............... 39
Cleaning the door seals......................................................................................... 39
What to do if ... .................................................................................................... 41
Noises................................................................................................................... 46
After Sales / Guarantee....................................................................................... 47
Electrical connection .......................................................................................... 48
Connecting the appliance ..................................................................................... 49
Installation............................................................................................................ 50
Location................................................................................................................. 50
Climate range ........................................................................................................ 51
Ventilation .............................................................................................................. 51
Fitting wall spacers supplied................................................................................. 51
Installation ............................................................................................................. 52
Building the appliance into a kitchen run .............................................................. 53
Installation dimensions.......................................................................................... 55
Changing the door hinging ................................................................................. 56
Aligning the appliance door ............................................................................... 60
3
Warning and Safety instructions
This appliance complies with all statutory safety requirements.
Please note that inappropriate use can lead to personal injury and
damage to property.
To avoid the risk of accidents and damage to the appliance,
please read these instructions carefully before using it for the first
time. They contain important notes on installation, safety, use and
maintenance.
Miele cannot be held liable for non-compliance with these instructions.
Keep these instructions in a safe place and ensure that new users
are familiar with the contents. Pass them on to any future owner.
Correct application
 This appliance is intended for use in domestic households and
similar working and residential environments.
It is not intended for outdoor use.
 This appliance is intended for domestic use only for cooling and
storing food and drink.
It must not be used for any other purpose.
 This appliance is not suitable for storing and keeping cool medicines, blood plasma, laboratory preparations or other such materials
or products. Incorrect use of the appliance for such purposes can
cause deterioration of the items stored. The appliance is not suitable
for use in areas where there is a risk of explosion.
Miele cannot be held liable for damage resulting from improper or incorrect use of the appliance.
4
Warning and Safety instructions
 The appliance can only be used by people with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge,
if they are supervised whilst using it, or have been shown how to use
it in a safe way and recognise and understand the consequences of
incorrect operation.
Safety with children
 Children under 8 years of age must be kept away from the appliance unless they are constantly supervised.
 Children 8 years and older may only use the appliance unsupervised if they have been shown how to use it in a safe way and recognise and understand the consequences of incorrect operation.
 Children must not be allowed to clean or maintain the appliance
unsupervised.
 Please supervise children in the vicinity of the appliance and do
not let them play with it.
 Danger of suffocation. Packaging, e.g. plastic wrappings, must be
kept out of the reach of babies and children. Whilst playing, children
could become entangled in packaging or pull it over their head and
suffocate.
Technical safety
 The coolant system is tested for leaks. This appliance complies
with statutory safety requirements and the appropriate EU
guidelines.
5
Warning and Safety instructions
 This appliance contains the coolant Isobutane (R600a), a natural
gas which is environmentally friendly. Although it is flammable, it
does not damage the ozone layer and does not increase the greenhouse effect.
The use of this coolant has, however, led to a slight increase in the
noise level of the appliance. In addition to the noise of the compressor, you might be able to hear the coolant flowing around the
system. This is unavoidable, and does not have any adverse effect
on the performance of the appliance.
Care must be taken during the transportation and setting up of the
appliance that no parts of the cooling system are damaged. Leaking
coolant can damage the eyes.
In the event of any damage:
– avoid naked flames or anything which creates a spark,
– disconnect the appliance from the mains electricity supply,
– ventilate the room where the appliance is located for several
minutes, and
– contact the Miele Service Department.
 The more coolant there is in an appliance, the larger the room it
should be installed in. In the event of a leakage, if the appliance is in
a small room, there is the danger of combustible gases building up.
For every 8 g of coolant at least 1 m3 of room space is required. The
amount of coolant in the appliance is stated on the data plate inside
the appliance.
6
Warning and Safety instructions
 To avoid the risk of damage to the appliance, make sure that the
connection data (fuse rating, frequency and voltage) on the data
plate corresponds to the household supply.
Check that this is the case before connecting the appliance. Consult
a qualified electrician if in any doubt.
 The electrical safety of this appliance can only be guaranteed
when correctly earthed. It is essential that this standard safety requirement is met. If in any doubt please have the electrical installation tested by a qualified electrician.
 Reliable and safe operation of this appliance can only be assured
if it has been connected to the mains electricity supply.
 If the electrical connection cable is faulty it must only be replaced
by a Miele authorised service technician to protect the user from
danger.
 Do not connect the appliance to the mains electrical supply by a
multi-socket adapter or extension lead. These are a fire hazard and
do not guarantee the required safety of the appliance.
 Do not use in a damp or wet environment (e.g. garage or utility
room). Moisture could reach live components or the electrical connection and cause a short circuit.
 This appliance must not be used in a non-stationary location (e.g.
on a ship).
 Do not use a damaged appliance. It could be dangerous. Check
the appliance for visible signs of damage.
 The appliance must be isolated from the electricity supply during
installation, maintenance and repair work.
 Unauthorised installation, maintenance and repairs can cause
considerable danger for the user.
Installation, maintenance and repairs must only be carried out by a
Miele authorised technician.
7
Warning and Safety instructions
 While the appliance is under guarantee, repairs should only be undertaken by a Miele authorised service technician. Otherwise the
guarantee is invalidated.
 Miele can only guarantee the safety of the appliance when genuine original Miele replacement parts are used. Faulty components
must only be replaced by Miele spare parts.
Correct use
 The appliance is designed for use within a certain climate range
(ambient temperatures), and should not be used outside this range.
The climate range for your appliance is stated on the data plate inside the appliance. Installing it in a room with too low an ambient
temperature, e.g. a garage, will lead to the appliance switching off
for longer periods so that it cannot maintain the required temperature.
 Do not cover or block the air vents as this could impair the efficiency of the appliance, increase the electricity consumption and
could cause damage to the components.
 If storing food which contains a lot of fat or oil in the appliance or
the door, make sure that it does not come into contact with plastic
components as this could cause stress cracks or break the plastic.
 Do not store explosive materials in the appliance or any products
containing propellants (e.g. spray cans). Electrical components could
cause flammable vapours to ignite. Danger of fire and explosion.
 Do not operate any electrical equipment (e.g. an electric ice cream
maker) inside the appliance. Danger of sparking and explosion.
 Observe the manufacturer's "use-by" dates and storage instructions given on food to avoid the risk of food poisoning. Storage times
will depend on several factors, including the freshness and quality of
the food, as well as the temperature at which it is stored.
8
Warning and Safety instructions
 Only use genuine original Miele accessories and spare parts with
this appliance. Using accessories or spare parts from other manufacturers will invalidate the guarantee, and Miele cannot accept liability.
Stainless steel appliances
 Adhesives will damage the stainless steel surface and cause it to
lose its dirt-repellent protective coating. Do not use sticky notes,
transparent adhesive tape, masking tape or other types of adhesive
on the stainless steel surface.
 The surface is susceptible to scratching. Even magnets can cause
scratching.
Cleaning and care
 Do not use any oils or grease on the door seals, as these will
cause the seals to deteriorate and become porous with time.
 Do not use a steam cleaning appliance to clean or defrost this appliance.
Steam could reach electrical components and cause a short circuit.
 Sharp edged or pointed objects will damage the evaporator, causing irreversible damage to the appliance. Do not use sharp edged or
pointed objects to
– remove frost and ice,
– separate frozen foods or remove ice trays.
 Do not place electric heaters or candles in the appliance to defrost it. These can damage the plastic parts.
 Do not use defrosting sprays or de-icers, as they could contain
substances which could damage the plastic parts or which might
cause the build-up of gases and pose a danger to health.
9
Warning and Safety instructions
Transporting the appliance
 Always transport the appliance in an upright position and in its original transport packaging to avoid damage in transit.
 Danger of injury and damage. The appliance is very heavy and
must be transported by two people.
10
Warning and Safety instructions
Disposal of your old appliance
 Before disposing of an old appliance, first make the door latch or
lock unusable.
This way you will prevent children from accidentally locking themselves in and endangering their lives.
 Splashes of coolant can damage the eyes. Be careful not to damage any part of the pipework whilst awaiting disposal, e.g. by
– puncturing the coolant channels in the condenser,
– bending any pipework, or
– scratching the surface coating.
Symbol on the compressor (depending on model)
This information is only relevant for recycling. In normal operation there is no risk.
 The oil in the compressor can be fatal if swallowed or if it penetrates the airways.
11
Caring for the environment
Disposal of the packing material
The packaging is designed to protect
the appliance from damage during
transportation. The packaging materials
used are selected from materials which
are environmentally friendly for disposal
and should be recycled.
Recycling the packaging reduces the
use of raw materials in the manufacturing process and also reduces the
amount of waste in landfill sites.
Disposal of your old appliance
Electrical and electronic appliances often contain valuable materials. They
also contain specific materials, compounds and components, which were
essential for their correct function and
safety. These could be hazardous to human health and to the environment if
disposed of with your domestic waste
or if handled incorrectly. Please do not,
therefore, dispose of your old appliance
with your household waste.
Please dispose of it at your local community waste collection / recycling
centre for electrical and electronic appliances, or contact your dealer or
Miele for advice. You are also responsible (by law, depending on country) for
deleting any personal data that may be
stored on the appliance being disposed
of.
12
Take care not to damage the pipework
at the back of it before or during transportation to an authorised collection depot.
In this way, refrigerant in the pipework
and oil in the compressor will be contained, and will not leak into the environment.
Please ensure that your old appliance
presents no danger to children while
being stored awaiting disposal. See
"Warning and Safety instructions" for
more information.
How to save energy
Installation site /
Maintenance
Temperature
setting
Normal energy consumption
Increased energy consumption
In a ventilated room.
In an enclosed, unventilated
room.
Protected from direct sunlight.
In direct sunlight.
Not near to a heat source
(radiator, oven).
Near to a heat source (radiator, oven).
Where the ideal ambient
room temperature is approx.
20 °C.
Where there is a high ambient room temperature.
Ventilation gaps uncovered
and dusted regularly.
Ventilation gaps covered or
dusty.
Compressor and metal grille
(heat exchanger) at the back
of the appliance dusted at
least once a year.
Dust build-up on the compressor and metal grille (heat
exchanger).
Refrigerator section 4 to
5 °C
The lower the temperature,
the higher the energy consumption.
13
How to save energy
Normal energy consumption
Use
Increased energy consumption
Drawers and shelves arranged as they were when
the appliance was delivered.
Only open the door when
necessary and for as short a
time as possible. Store food
in an organised way.
Frequent opening of the
door for long periods will
cause a loss of coldness.
The appliance will cool down
and the compressor will run
for longer periods.
Take an insulated cool bag
when shopping and load
food in the appliance as
soon as possible.
Replace any food removed
as quickly as possible, before it begins to thaw.
Allow hot food and drinks to
cool down before placing
them in the appliance.
Hot food or food at room
temperature raises the temperature inside the appliance. The appliance will cool
down and the compressor
will run for longer periods.
Store food covered or packaged.
The evaporation or condensation of liquids will cause a
loss of coldness.
Place frozen food in the refrigerator to defrost.
Do not over-fill the appliance Poor air circulation will
to allow air to circulate.
cause a loss of coldness.
14
Guide to the appliance
Control panel
a On/Off sensor the DynaCool function e On/Off sensor for the Super cool
function
b For setting the temperature
f For switching off the door alarm
( for warmer)
c For setting the temperature
( for colder)
d For switching the appliance on and
off
g Display with temperature and symbols
(symbols only visible during use; see
table for explanation of symbols)
Symbols in the display
Symbol
Function

Alarm
Flashes if the door has been left open

SuperCool
Lights up when SuperCool is switched on

Safety lock
Lights up when the lock is activated

DynaCool
Lights up when DynaCool is switched on
DEMO
Demo mode
Demo mode has been activated.
Call Service.
MENU
Settings menu
Lights up when settings are being made
15
Guide to the appliance
a Fan
b Butter and cheese compartment
c Egg tray
d Adjustable shelf
e Bottle rack
f Bottle shelf with bottle holder
g Condensate channel and
drain hole
h Fruit and vegetable drawers
For easier installation there are transport handles on the back at the top and
transport wheels underneath the appliance.
This drawing is for illustration purposes only.
16
Accessories
Accessories supplied
Optional accessories
Bottle rack
A range of useful Miele accessories and
care products are available for your appliance.
Bottle rack
The appliance is supplied with a bottle
rack for the refrigerator section. Additional bottle racks can be fitted if required.
Bottles can be stored horizontally using
the bottle rack to save space.
The bottle rack can be placed at different positions in the appliance.
KKF-FF Active AirClean charcoal filters with holder
Charcoal filters neutralise unpleasant
odours in the refrigerator section for improved air quality.
Egg tray
The charcoal filter holder clips onto the
protective strip at the back of the shelf
and can be moved as necessary.
KKF-RF
Active AirClean replacement filters
Replacement filters to fit the Active
AirClean holder are available. We recommend replacing the charcoal filters
every 6 months.
Side-by-side fitting kit
For installing two appliances next to
each other.
17
Accessories
Multi-purpose microfibre cloth
The microfibre cloth is suitable for removing fingerprints and light soiling
from surfaces such as stainless steel,
glass, plastic and chrome without the
use of chemicals.
Accessories are available to order via
the Miele Webshop, from Miele directly (see back cover for contact details) or from your Miele dealer.
18
Switching on and off
Before using for the first time
Operating the appliance
Packaging material
A light touch of the finger on the
sensors is all that is required to operate
this appliance.
 Remove all packaging material from
the inside of the appliance.
Protective foil
The stainless steel trim on the interior
shelves and the door shelves has a
layer of protective foil to prevent damage during transportation. The appliance door and the side panels may also
have protective foil on them.
 Do not remove the foil until the appliance has been positioned in its final
location.
Cleaning and care
Please refer to the relevant instructions in "Cleaning and care".
 Clean the inside of the appliance and
the accessories.
Switching on
 Touch the On/Off sensor.
The temperature display will light up
and show the current temperature in the
appliance.
If the word DEMO appears in the display, demo mode is active. Please call
Miele Service.
The appliance will start to cool and the
interior lighting will come on when the
appliance door is opened.
Connecting the appliance
 Connect the appliance to the electricity supply as described in "Electrical
connection".
19
Switching on and off
Switching off
Switching off for longer periods of time
 If, during a long absence, the ap-
 Touch the On/Off sensor.
The temperature display will go out.
If this is does not happen, the safety
lock  is still activated (see "Selecting
further settings - To activate/deactivate
the lock").
The cooling system will be switched off.
pliance is switched off but not
cleaned and the door(s) left shut,
there is a danger of mould building
up inside the appliance.
It is essential to clean the appliance.
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday:
 switch the appliance off,
 disconnect it from the mains,
 clean the appliance and
 leave the door(s) ajar to air the appliance and avoid odours building up inside the appliance.
20
The correct temperature
It is very important to set the correct
temperature for storing food in the appliance. Micro-organisms will cause
food which is not stored at the correct
temperature to deteriorate rapidly. Temperature influences the growth rate of
these micro-organisms. Reducing the
temperature reduces their growth rate.
The temperature in the appliance will
rise:
– the more often the door is opened
and the longer it is kept open,
– the more food that is stored in it,
– the warmer the food is which is being
put into it,
. . . in the refrigerator section
We recommend a temperature of 4 °C
in the refrigerator section.
Temperature display
In normal operation the temperature
display shows the average, current
temperature in the refrigerator.
Depending on the ambient temperature
and the temperature setting, it can take
the appliance a few hours to reach the
temperature required and for this temperature to then be shown as a constant temperature in the display.
– the higher the ambient temperature
surrounding the appliance. The appliance is designed for use within specific ambient temperatures (climate
range). Do not use in ambient temperatures for which it is not designed.
21
The correct temperature
Setting the temperature
The two sensors next to the display are
used for setting the temperature.
 Touch this sensor to lower the temperature.
Tip: If you have adjusted the temperature, wait for approx. 6 hours if the appliance is not very full and for approx.
24 hours if the appliance is full before
checking the temperature display, as it
will take this long for the appliance to
give an accurate reading. If, after this
time, the temperature is still too high or
too low you will need to reset it.
Temperature range
The temperature can be adjusted from
2 °C to 9 °C.
 Touch this sensor to increase the
temperature.
The temperature being set will flash in
the display.
The following information can be
viewed in the display when the sensors
are touched:
– Touching a sensor once: the last
temperature selected flashes.
– Each subsequent touch of the
sensor: adjusts the temperature
shown in 1 °C steps.
– Leaving a finger on the sensor
changes the temperature continuously.
Approximately 5 seconds after the last
time a sensor has been touched, the
current temperature inside the appliance is automatically shown.
22
Using Super cool and DynaCool
SuperCool function
Switching off SuperCool
The SuperCool function can be used to
rapidly reduce the temperature in the
refrigerator section to its lowest setting
(depending on the room temperature).
The SuperCool function switches off
automatically after approx. 6–12 hours.
The SuperCool symbol  will go out
and the appliance will then continue to
work at normal power.
SuperCool is particularly recommended
for the rapid chilling of large amounts of
fresh food or drink.
To save energy, the SuperCool function
can be switched off once food and
drinks are sufficiently chilled.
Switching on SuperCool
 Touch the SuperCool sensor.
The SuperCool symbol  will light up in
the display.
The appliance will work at full power to
lower the temperature in the appliance.
 Touch the SuperCool sensor.
The SuperCool symbol  in the display
will go out.
The appliance will continue running at
normal power.
23
Using Super cool and DynaCool
DynaCool function
When the DynaCool function is not
switched on, the natural circulation of
air in the appliance will cause different
temperature zones in the refrigerator as
the cold, heavy air will sink to the lowest section of the appliance. You should
bear this in mind when placing food in
the appliance (see "Storing food in the
refrigerator section").
However, if you are placing a large
amount of food in the refrigerator at any
one time, it is a good idea to switch on
DynaCool. This way you can distribute
the temperature inside the appliance to
all areas more evenly so that all the
food will be chilled to about the same
degree.
The temperature is set as normal with
the temperature control.
Switching on DynaCool
 Touch the DynaCool sensor.
The  symbol will appear in the display.
The fan is running. With some appliances it only switches on when the
compressor is running.
Switching off DynaCool
Because DynaCool requires more energy, you should switch it off under normal conditions.
DynaCool should also be selected
when:
 Touch the DynaCool sensor.
– the ambient temperature in the room
is high (above approx. 30 °C), and
The  symbol in the display will go out
and the fan switches off.
– the room humidity level is high.
24
To save energy, the fan switches off
automatically whilst the appliance
door is open.
Door alarm
An alarm will sound if the appliance
door has been left open for longer than
60 seconds.
It will stop as soon as the door is
closed.
Switching the door alarm off
early
If the noise disturbs you, you can
switch the alarm off if you wish.
 Touch the sensor for switching off the
door alarm.
The alarm will stop.
25
Selecting further settings
Temperature display brightness
The temperature display brightness can
be adjusted to suit lighting conditions in
the room.
The temperature display brightness can
be adjusted in stages from  0 (lighting
off) to  5 (maximum brightness).
 You can now adjust the brightness of
the temperature display using the
sensors for altering the temperature.
You have a choice between settings 
 to  .
To change the brightness of the temperature display
 Touch the SuperCool sensor to save
the setting.
 Touch the SuperCool sensor for approx. 5 seconds.
The brightness is now set to this new
value.
The MENU symbol will light up and 
will start flashing.
 Keep touching one of the temperature
setting sensors until you see  in the
display.
 Touch the SuperCool button again.
26
 To come out of settings mode touch
the On/Off sensor, or wait for approx.
5 minutes and the electronics will
automatically revert to normal operation.
Selecting further settings
Safety lock 
To deactivate the lock
The safety lock prevents the appliance
being switched off without your knowledge, by children, for example.
To activate the lock
 Touch the SuperCool sensor for approx. 5 seconds.
The MENU symbol will appear in the
display and a  will start flashing.
 Touch the SuperCool sensor for approx. 5 seconds.
The MENU symbol will appear in the
display and a  will start flashing.
 Touch the SuperCool button again.
  will appear in the display.
 Touch the SuperCool button again.
  will appear in the display.
– To activate the lock confirm the  
option by touching the SuperCool
sensor again.
– If you want to cancel the process
touch the On/Off sensor twice.
– To deactivate the lock confirm the  
option by touching the SuperCool
sensor again.
– If you want to cancel the process
touch the On/Off sensor twice.
The lock symbol  in the display will
go out when the lock has been deactivated.
The lock symbol  will appear in the
display if you have activated the lock.
 To come out of settings mode touch
the On/Off sensor, or wait for approx.
5 minutes and the electronics will
automatically revert to normal operation.
 To come out of settings mode touch
the On/Off sensor, or wait for approx.
5 minutes and the electronics will
automatically revert to normal operation.
27
Storing food in the refrigerator section
 Danger of explosion.
Warmest area
Do not store explosive materials in
the appliance or any products containing propellants (e.g. spray cans).
The warmest area in the refrigerator
section is at the top in the front area
and in the door. Use this for storing butter and cheese.
 If storing food which contains a
Coldest area
lot of fat or oil in the appliance or the
appliance door, make sure that it
does not come into contact with
plastic components as this could
cause stress cracks or break the
plastic.
Different storage zones
Due to natural air circulation there are
different temperature zones in the refrigerator section.
Cold, heavy air sinks to the lowest section of the appliance. Make use of the
different temperature zones when placing food in the appliance.
To allow air to circulate efficiently, do
not pack food too closely together in
the refrigerator.
Do not cover the fan in the rear wall of
the refrigerator, as this is essential for
keeping the appliance cool.
Food must not touch the back of the
refrigerator section as it may freeze to
the back wall.
28
The coldest area is directly above the
fruit and vegetable drawer(s) and at the
back of the appliance.
Use this for all delicate and highly perishable food, e.g.
– fish, meat, poultry,
– sausage products, ready meals,
– dishes or baked goods containing
eggs or cream,
– fresh dough, cake mixtures, pizza or
quiche dough,
– soft cheese and other dairy products,
– pre-packed vegetables and other
fresh food with a label stating it
should be kept at a temperature of
approx. 4 °C.
Storing food in the refrigerator section
Food which is not suitable for
storage in the refrigerator section
Not all food is suitable for refrigeration
at temperatures below 5°C as some
food is sensitive to cold. The appearance, consistency, taste and / or the vitamin content of certain types of food
can be adversely affected by being
stored in too cold a place.
Food which does not tolerate cold temperatures includes:
– Pineapples, avocados, bananas,
pomegranates, mangoes, melons,
papayas, passion fruit, citrus fruits
(such as lemons, oranges, mandarins, grapefruit),
When shopping for food
The freshness of food when first placed
in the appliance is the most important
factor in determining how long it stays
fresh, and how long it can be kept in the
appliance.
Always observe the use-by date and
the recommended storage temperature.
Time out of the refrigerator should be
kept to a minimum, for example, when
transporting food in a hot car.
Tip: Take a cool bag with you when
shopping and on return place food into
the appliance immediately.
– Fruit which is not yet ripe
– Aubergines/eggplant, cucumbers,
potatoes, peppers/capsicum, tomatoes, courgettes/zucchini,
– Some hard cheeses, e.g. Parmesan.
29
Storing food in the refrigerator section
Storing food correctly
Food should generally be stored
covered or packaged in the refrigerator section. This will prevent food
smells from affecting other food, food
from drying out, and also any crosscontamination of bacteria. This is especially important for storing proteinbased food such as meat or fish.
The growth of bacteria, such as salmonella, can be avoided by setting the
correct temperature and maintaining
good standards of hygiene.
Fruit and vegetables
Fruit and vegetables can be stored
loose in the fruit and vegetable
drawer(s).
Protein rich food
Please note that food rich in protein deteriorates faster than other types of
food. Shellfish, for example, deteriorates faster than fish, and fish deteriorates faster than meat.
30
Adjusting the interior fittings
Moving the shelves
Moving split shelves
The shelves can be adjusted according
to the height of the food.
In order to accommodate tall items in
the appliance such as bottles or large
containers, one of the shelves is divided. The front section can be pushed
carefully under the rear section:
 Push the rear half of the glass shelf
slightly upwards.
 Raise the shelf, and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
The raised edge on the protective strip
at the back must face upwards to prevent food from touching the back of the
appliance and freezing to it.
 With the rear half pushed up, lift the
front half of the glass shelf up slightly
at the front, then slide it carefully underneath the rear half.
 To move the split shelf to another
level take both sections out of the appliance.
Stoppers prevent the shelves from being dislodged by mistake.
 Then place the two support rails on
the left and right support ribs at the
desired height and
 slide the two sections in one after the
other.
The section with the raised edge must
be fitted at the back.
31
Adjusting the interior fittings
Adjusting the door shelf /
bottle shelf
Adjusting the bottle rack
 Push the door/bottle shelf upwards,
then remove it by pulling it forwards
 Replace the door/bottle shelf at the
required position. Ensure that it is securely pushed back into position.
Adjusting or removing the
bottle holder
The bottle rack can be placed at different positions in the appliance.
 Raise the bottle rack slightly at the
front, and pull it forwards a little until
the notch at the side is in line with the
shelf support. It can then be raised or
lowered to the required level.
The bottle holder can be moved left or
right to create more room for drink cartons.
The bottle holder can be removed completely (e.g. for cleaning):
 Pull the bottle holder upwards to remove it from the rear edge of the
bottle shelf.
The bottle holder can be replaced after
cleaning.
32
The rear rail must face upwards to prevent bottles from touching the back of
the appliance.
Stoppers prevent the bottle rack from
being dislodged by mistake.
Adjusting the interior fittings
Removing and replacing the
fruit and vegetable drawer
The fruit and vegetable drawer is on
telescopic runners and can be removed
for filling, emptying or cleaning purposes.
 Pull out the drawer as far as it will go,
and then lift it up and out.
 Push the runners back in again
to avoid damaging them.
Replacing the drawer
 Push the runners in completely and
then place the drawer on them.
 Push the drawer into the appliance
until it clicks into position.
33
Defrosting
Refrigerator section
The refrigerator section defrosts automatically.
Condensate and frost can build up on
the back wall of the refrigerator section
whilst the compressor is running. You
do not need to remove this, as it will defrost and evaporate automatically with
the warmth generated by the compressor.
The condensate is drained away
through a channel and drain hole, then
fed into an evaporation system at the
back of the appliance.
 Condensate must be able to
drain away unhindered at all times.
Keep the condensate channel and
drain hole clean to enable this.
34
Cleaning and care
 Do not let water get into the
electronic unit or the lighting.
 Steam from a steam cleaning appliance could reach the electrical
components and cause a short circuit.
Do not use a steam cleaning appliance to clean the appliance.
Cleaning water must not get into the
drain hole.
The data plate located inside the appliance must not be removed. It contains information which is required in
the event of a service call.
Cleaning agents
Cleaning and conditioning agents
used inside the appliance must be
food safe.
To avoid damaging all the surfaces of
your appliance, do not use:
– cleaning agents containing soda, ammonia, acids or chlorides
– cleaning agents containing descaling
agents
– abrasive cleaning agents, e.g.
powder cleaners and cream cleaners
– solvent-based cleaning agents
– stainless steel cleaning agents
– dishwasher cleaner
– oven sprays
– glass cleaning agents
– hard, abrasive sponges and brushes,
e.g. pot scourers
– melamine eraser blocks
– sharp metal scrapers
We recommend using a clean sponge,
lukewarm water with a little washing-up
liquid to clean surfaces of the appliance.
The following pages contain important
information on cleaning.
35
Cleaning and care
Preparing the appliance for
cleaning
 Switch the appliance off.
The temperature shown in the display
will go out and the cooling system
switches off.
 Disconnect the appliance from the
mains. Switch off at the wall and
withdraw the plug from the socket, or
switch off at the mains fuse board.
Dismantling an adjustable shelf
Before cleaning the shelf remove the
stainless steel trim at the front and the
protective strip at the back of the shelf.
To do this:
 Place the shelf on a worktop covered
with a soft material (e.g. on a tea
towel).
 Take any food out of the appliance
and store it in a cool place.
 Remove the shelves/bottle shelf from
the appliance door.
 Take out all other removable parts for
cleaning.
 Pull the stainless steel trim off the
shelf beginning at one side.
 Pull the protective strip off the shelf.
 After cleaning the shelf reattach the
stainless steel trim and the protective
strip.
36
Cleaning and care
Cleaning the interior and accessories
Clean the appliance at least once a
month.
Remove soiling immediately to prevent
it from drying on.
 Clean the interior with a clean
sponge, lukewarm water and a little
washing-up liquid.
The following parts cannot be cleaned
in a dishwasher:
– the protective strips at the back of
the adjustable shelves
– all drawers and the compartment lid
(depending on model)
– the bottle rack
 These accessories should all be hand
washed.
 After cleaning, wipe with clean water
and dry with a soft cloth.
 Leave the door open to air the appliance for a short while and to prevent
odours building up.
37
Cleaning and care
The following parts are suitable for
cleaning in a dishwasher:
 The maximum temperature of the
dishwashing programme selected
must not exceed 55 °C.
Contact with natural dyes e.g. from
carrots, tomatoes and ketchup may
discolour the plastic parts in the
dishwasher. This discolouration does
not affect the stability of the parts.
– the adjustable shelves (with the trim
and strips removed)
– bottle holder, butter dish, egg tray
(depending on model)
– the shelves and bottle shelf in the
door
the butter and cheese compartment
Cleaning the front of the appliance and the side panels
If soiling is left on for any length of
time, it may become impossible to
remove.
Surfaces may suffer discolouration or
damage.
Therefore it is best to remove soiling
from the appliance door and side
panels immediately.
All surfaces are susceptible to
scratching. Contact with unsuitable
cleaning agents can alter or discolour the surfaces.
See "Cleaning agents" at the beginning of this section.
38
 The surfaces should be cleaned using
a solution of hot water and a little
washing-up liquid applied with a soft
sponge. They can also be cleaned
with a damp microfibre cloth (without
using any cleaning agent).
 After cleaning, wipe with clean water
and dry with a soft cloth.
Stainless steel appliances
The appliance front has a high quality,
special finish (CleanSteel) which is resistant to soiling and is very easy to
clean.
 Do not use stainless steel
cleaning agent on CleanSteel surfaces. It will damage them.
Do not use Miele stainless steel
conditioning agent on these surfaces. This will cause noticeable
smearing.
Cleaning the ventilation gaps
A build-up of dust will increase the energy consumption of the appliance.
 The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (e.g. use the
dusting brush for Miele vacuum
cleaners)
Cleaning and care
Cleaning the compressor and
metal grille at the back of the
appliance
 When cleaning the compressor
and the grille, make sure that the
pipework and other components do
not get broken or damaged in any
way.
The compressor and metal grille at the
back of the appliance (heat exchanger)
should be dusted at least once a year. A
build-up of dust will increase the energy
consumption of the appliance.
Cleaning the door seals
 If a door seal is damaged or if it
has come out of the groove, the door
will not close properly and cooling
performance will be reduced.
Condensate will build up in the interior and this can cause a build-up
of ice.
Do not damage door seals and ensure that they do not come out of
their groove.
Do not use any grease or oil on door
seals as these will cause them to deteriorate and become porous over
time.
 Door seals should be cleaned regularly with clean water, and then wiped
dry with a soft cloth.
39
Cleaning and care
After cleaning
 Replace all shelves and accessories
in the appliance.
 Reconnect to the mains and switch
the appliance back on.
 Switch on the Super cool function for
a while so that the appliance can cool
down quickly.
 Place food back in the appliance and
close the door.
40
What to do if ...
Some minor problems can be corrected without contacting Miele.
If, having followed the suggestions below, you still cannot resolve the problem,
please contact Miele.
To prevent unnecessary loss of temperature it is advisable not to open the door
while waiting for the appliance to be serviced.
 Unauthorised installation, maintenance and repairs can cause considerable
danger for the user.
Installation, maintenance and repairs must only be carried out by a Miele authorised technician.
Problem
Cause and remedy
The appliance is not
getting cold and the interior lighting does not
come on when the door
is opened.
The appliance has not been switched on.
 Switch the appliance on.
The mains plug is not inserted in the socket correctly
or the plug connector is not inserted into the socket
at the back of the appliance correctly.
 Insert the mains plug into the mains socket and
the plug connector into the appliance socket correctly and switch on.
Check whether the mains fuse has tripped. There
could be a fault with the appliance, the household
electrical wiring or another electrical appliance.
 Contact a qualified electrician or Miele.
The compressor runs
continuously.
This is not a fault. To save energy, the compressor
runs at a lower speed, but for longer, when less cooling is required.
41
What to do if ...
Problem
Cause and remedy
The compressor is
switching on more frequently and for longer
periods of time, so the
temperature in the appliance is dropping.
The ventilation gaps have been covered or become
too dusty.
 Do not block the ventilation gaps.
 Dust the ventilation gaps regularly.
The door has been opened too frequently, or a large
amount of food has just been put in at once.
 Only open the door when necessary and for as
short a time as possible.
The required temperature will re-establish itself after a
while.
The appliance door is not properly closed.
 Close the appliance door.
The required temperature will re-establish itself after a
while.
The ambient temperature is too high. The higher the
room temperature, the longer the compressor will run
for.
 See "Installation - Location".
The appliance was not properly installed in the niche.
 See "Installing the appliance".
The compressor is
switching on more frequently and for longer
periods of time, so the
temperature in the appliance is dropping.
The temperature setting is too low.
 Adjust the temperature.
The Super cool function is still switched on.
 You can switch off the Super cool function earlier
to save energy.
The compressor comes This is not a fault. The temperature is too high.
on less and less often
 Adjust the temperature.
and for shorter periods  Check the temperature again after 24 hours.
of time. The temperature in the appliance
rises.
42
What to do if ...
Display warnings
Message
Cause and remedy
DEMO lights up in the
display, the appliance
does not get cold, although the appliance
controls are working.
Demo mode is switched on. This allows the appliance
to be presented in the showroom without the cooling
system being switched on. Do not activate this setting
for domestic use.
 Call Service.
 is lit up in the display The safety lock has been activated.
and the appliance can-  Deactivate the lock (see "Selecting further settings
not be used.
- Activating or deactivating the lock").
"F0 to F9" appears in
the display.
There is a fault.
 Call the Miele Service Department.
43
What to do if ...
The interior lighting is not working.
Problem
Cause and remedy
The interior lighting is
not working.
The appliance has not been switched on.
 Switch the appliance on.
To avoid overheating, the lighting switches itself off
automatically after approx. 15 minutes if the door is
left open. If this is not the case, then there is a fault.
 Danger of electric shock.
There are live electrical components under the
lighting cover.
The LED lighting may only be repaired or replaced
by a Miele authorised service technician.
 Danger of injury from LED lighting. Light intensity corresponds to laser beam class 1/1M.
The lighting covers must not be removed or damaged, or be removed due to damage. This could
cause injury to your eyes.
Do not look into the LED lighting (laser beam class
1/1M) with optical instruments (e.g. magnifying
glass or similar).
 Call the Miele Service Department.
44
What to do if ...
Other problems
Problem
Cause and remedy
A buzzer is sounding.
The door alarm has been activated.
 Close the appliance door. The buzzer will stop.
An LED indicator light is
flashing at the back of
the appliance at the
bottom near the compressor (depending on
model).
This is not a fault. The electronic unit for the compressor is equipped with an operation and fault diagnosis LED indicator light which flashes every 15
seconds (depending on model).
The external walls of
the appliance feel
warm.
This is not a fault. The warmth created by the evaporator is used to prevent condensation.
The door seal is damaged and needs to be
replaced.
No tools are required to change the door seal.
 Change the door seal. These are available from
Miele.
The floor of the refriger- The condensate drain hole is blocked.
ator section is wet.
 Clean the condensate channel and drain hole.
45
Noises
Normal noises
What causes them
Brrrrr ...
A humming noise is made by the motor (compressor). This
noise can get louder for brief periods when the motor switches
on.
Blubb, blubb ...
A gurgling noise can be heard when coolant is circulating
through the pipes.
Click ...
Clicking sounds are made when the thermostat switches the
motor on and off.
Sssrrrrr ...
On multi-zone or frost-free appliances you can sometimes just
hear the sound of the fan inside the appliance.
Crack ...
A cracking sound can be heard when materials expand inside
the appliance.
Remember that the noise of the compressor and the coolant circulating in the
system is unavoidable.
Noises that
you can easily
rectify
Cause and remedy
Rattling, vibrat- The appliance is uneven.
ing
Realign the appliance using a spirit level, by raising or lowering
the screw feet underneath the appliance.
The appliance is touching another appliance or piece of furniture.
Move it away.
Drawers, baskets or shelves are unstable or sticking.
Check all removable items and refit them correctly.
Bottles or containers are touching each other.
Separate them.
46
After Sales / Guarantee
After sales service
Guarantee: U.K.
In the event of any faults which you
cannot easily remedy, please contact
In the U.K. the appliance is guaranteed
for 2 years from the date of purchase.
However, you must activate your cover
by calling 0330 160 6640 or registering
online at www.miele.co.uk.
– your Miele Dealer, or
– the Miele Service Department.
See end of this booklet for contact details. Please note that telephone calls
may be monitored and recorded for
training purposes and that a call-out
charge will be applied to service visits
where the problem could have been
resolved as described in this booklet.
Guarantee: Other countries
For information on the appliance guarantee specific to your country please
contact Miele.
See end of this booklet for contact details.
When contacting your Dealer or Miele,
please quote the model and serial number of your appliance.
This information is given on the data
plate inside your appliance.
47
Electrical connection
The appliance must only be connected
using the connection cable supplied
(AC 220-240 V 50 Hz supply). A longer
connection cable is available from
Miele.
The fuse rating must be at least 10 A
(13 A in the UK).
This appliance must be connected to a
suitable switched socket which is easily
accessible. The electrical connection
must comply with current local and national safety regulations (BS 7671 in the
UK).
The accessibility of the plug must always be ensured in order to be able to
quickly separate the appliance from the
mains.
If the mains socket is not accessible
after the appliance has been installed, a
separator for each terminal must be
present. There must be an all-pole contact gap of at least 3 mm in the switch
(including switch, fuses and relays according to EN 60335).
48
The plug and mains connection cable
must not come into contact with the
back of the appliance as vibrations can
cause damage to these components.
This, in turn, could result in a short circuit.
Do not plug in other appliances behind
this appliance.
Do not connect the appliance to the
mains electricity supply by an extension
lead. Extension leads do not guarantee
the required safety of the appliance
(e.g. danger of overheating).
Do not connect the appliance to an inverter such as those used with an
autonomous energy source e.g. solar
power. When switched on, peak loads
in the system can cause the safety
switch-off mechanism to be triggered.
This can damage the electronic unit.
The appliance must not be used with
so-called energy-saving devices
either. These reduce the amount of energy supplied to the appliance, causing
it to overheat.
Electrical connection
Connecting the appliance
 Insert the plug connector into the
socket at the back of the appliance.
Make sure that the plug connector has
clicked into position correctly.
 Insert the mains plug into the mains
socket and switch on.
The appliance is now connected to the
mains electricity supply.
49
Installation
 Do not place any appliance
Location
which gives off heat, such as a
toaster, mini-oven or double burner
hob, on top of this appliance. There
is the danger of these catching fire.
This appliance should not be installed
where it is exposed to direct sunlight or
directly adjacent to a heat-producing
appliance such as an oven or a radiator.
The higher the ambient temperature of
the room, the longer the compressor
will run for and the higher the energy
consumption. The appliance should be
installed in a dry, well ventilated room.
This appliance has side-wall heating
and can be installed side-by-side with
another refrigeration appliance. Please
ask your dealer for details of suitable
combination appliances.
When installing the appliance, please
be aware:
– The socket must be easily accessible
in an emergency, not concealed behind the appliance.
– The plug and cable must not touch
the back of the appliance as they
could get damaged by vibrations
from the appliance.
– Do not plug in other appliances behind this appliance.
 In environments with high humidity condensation can build up on
the external appliance panels.
This can lead to corrosion of the
panels.
For prevention, it is advisable to install the appliance with sufficient
ventilation in a dry and/or air conditioned room.
After installation make sure that the
appliance door closes properly, the
specified ventilation gaps have been
adhered to and that the appliance
has been installed in accordance
with these installation instructions.
50
Installation
Climate range
Fitting wall spacers supplied
The appliance is designed for use within
a certain climate range (ambient temperatures) and should not be used outside this range. The climate range of the
appliance is stated on the data plate inside the appliance.
Climate range
Ambient room
temperature
SN
+10 to +32 °C
N
+16 to +32 °C
ST
+16 to +38 °C
T
+16 to +43 °C
The wall spacers supplied must be
used in order to achieve declared energy consumption values and to prevent the build-up of condensation at
high ambient temperatures. Appliance
depth is increased by approx. 35 mm
with the wall spacers fitted. If the wall
spacers are not used the functionality
of the appliance is not affected. Energy consumption is only slightly increased with less distance between
the appliance and the wall.
Operating in a room which is too cold
will cause the compressor to switch off
for too long, causing the internal temperature in the appliance to rise with the
risk of food deteriorating and going off.
Ventilation
Air at the back of the appliance gets
warm.
 To ensure efficient ventilation the
 Fit the wall spacers onto the back of
the appliance on the top left and
right.
ventilation gaps must not be covered
or blocked in any way. They should
be dusted on a regular basis.
51
Installation
Installation
Levelling the appliance door
 Two people are required for installing the appliance.
 The appliance must be empty
when it is installed.
 Move the appliance carefully on
floors that are sensitive to scratching
to prevent damage.
For easier installation there are transport handles on the back at the top
and transport wheels underneath the
appliance.
 Prepare the appliance for installation
as close as possible to its intended
installation location.
 Connect the appliance to the electricity supply as described in "Electrical
connection".
 Move the appliance carefully to its intended installation location.
 Position the appliance with the wall
spacers (if used) or the back close to
the wall.
Aligning the appliance
 To align the appliance, adjust the
front feet using the spanner supplied
52
 Ensure that you unscrew adjustable
foot  from the hinge plate until it
sits on the floor. Then unscrew the
foot by a further ¼ turn.
Installation
Building the appliance into a
kitchen run
 If the ventilation gaps given are
not observed, the compressor will
run more frequently and for longer
periods.
This will result in increased energy
consumption and a higher operating
temperature for the compressor. This
may, in turn, cause damage to the
compressor.
It is essential to observe the ventilation gaps given.
a Top box
b Appliance
c Housing unit
d Wall
x: the appliance depth is increased by
approx. 35 mm for appliances with
wall spacers fitted.
The appliance can be installed in a run
of kitchen units (standard cabinets,
max. depth 580 mm) or next to a kitchen cabinet. The appliance front will
stand proud of the adjacent furniture by
65 mm (or approx. 100 mm if wall
spacers have been fitted).
53
Installation
This is to ensure that the door can open
and close without hindrance. To align
the refrigeration appliance with adjoining furniture a suitable top box  can
be installed above it.
When installed next to a wall  a distance of approx. 45 mm must be maintained on the hinge side between the
wall  and the appliance .
The larger the ventilation gaps, the
more economically the compressor
will work.
– A ventilation gap of at least 50 mm
depth must be provided at the back
of the appliance behind the whole
width of the top box for air to circulate.
– The cross-section of the air inlet and
outlet under the ceiling must be at
2
least 300 cm to ensure that air can
circulate without obstruction.
54
Installation
Installation dimensions
x: dimensions without wall spacers. Appliance depth is increased by 35 mm with the wall
spacers supplied fitted.
55
Changing the door hinging
The appliance is supplied left-hand
hinged. If right-hand hinging is required,
the hinges must be changed.
Removing the top covers
 Close the appliance door.
Do not change the hinging if this appliance is going to be installed side-byside with another refrigeration appliance.
 Two people are needed for changing the door hinging.
 If a door seal is damaged or if it
has come out of the groove, the door
will not close properly and cooling
performance will be reduced.
Condensate will build up in the interior and this can cause a build-up
of ice.
Do not damage the door seals and
ensure that they do not come out of
their groove.
Preparation
To change the door hinging, you will
need the following tools:
 Place a suitable cover on the floor in
front of the appliance to protect the
appliance door and your floor from
damage.
56
 Remove cover  by sliding it forwards from the back and then lifting it
off.
 Remove cover  by pulling it upwards.
 Danger of injury when removing
the appliance door.
The appliance door is not secure
once the hinge plate has been removed.
The door must be held by a second
person.
Changing the door hinging
Removing the door
Changing the handle over
 Loosen screws  in hinge plate 
and pull it upwards and off.
 Carefully lift appliance door off and
place carefully to one side.
 Take stoppers  out of the door
bearings in the appliance door.
 Remove stopper  from the top of
the door and refit it on the opposite
side of the door.
 Remove covers  from handle ,
then unscrew the handle and refit all
these parts on the opposite side of
the door.
 Take care when refitting covers 
that they click into position correctly.
 Refit stoppers  on the opposite side
of the door.
57
Changing the door hinging
 To change over the spring clamp 
press down on the catch and pull the
spring clamp forwards:
 Remove cover .
 Take screw  out and screw it into
the outside hole on the opposite side.
 Turn cover  through 180° and refit it
on the opposite side.
Changing the lower hinge plate
over
 Screw hinge plate  securely into
position on the new hinge side.
 Refit the entire hinge pin , including
the washer  and adjustable foot .
Important! The tab on the hinge pin
must still face downwards.
 Place door  onto the hinge pin from
above.
 Close the appliance door.
 Pull hinge pin  complete with
washer  and adjusting foot  upwards to remove.
 Remove stopper .
 Undo the screws  and remove the
hinge plate .
 Loosen the screw for the door closing
aid  in hinge plate . Refit the door
closing aid  in the hole on the other
side of the hinge plate and then
tighten the screw up again.
 Insert stopper  into the other hole.
58
Changing the door hinging
Inserting the upper hinge plate
 Fit hinge plate  on the opposite
side and secure it with screws . If
necessary drill pilot holes for the
screws or use a battery operated
screwdriver.
 Replace covers  and  on the opposite side.
 Align the door with the appliance
housing using the long slots in the
lower hinge plate. Then tighten the
screws.
59
Aligning the appliance door
The appliance door can be aligned with
the appliance housing after it has been
fitted.
In the following illustration the door is
not shown in the closed position to
make it easier to see what you have to
do.
To align the appliance door use the long
outer slots in the lower hinge plate:
 Remove centre screw  from the
hinge plate.
 Slightly loosen both outer screws .
 Align the door by sliding the hinge
plate to the left or right.
 Then tighten screws  again.
Screw  does not need to be refitted.
60
United Kingdom
Miele Co. Ltd.
Fairacres, Marcham Road
Abingdon, Oxon, OX14 1TW
Customer Contact Centre Tel: 0330 160 6600
E-mail: mielecare@miele.co.uk
Internet: www.miele.co.uk
Australia
Miele Australia Pty. Ltd.
ACN 005 635 398
ABN 96 005 635 398
1 Gilbert Park Drive, Knoxfield, VIC 3180
Tel: 1300 464 353
Internet: www.miele.com.au
China
Miele (Shanghai) Trading Ltd.
1-3 Floor, No. 82 Shi Men Yi Road
Jing' an District
200040 Shanghai, PRC
Tel: +86 21 6157 3500, Fax: +86 21 6157 3511
E-mail: info@miele.cn, Internet: www.miele.cn
Miele (Hong Kong) Limited
41/F - 4101, Manhattan Place
23 Wang Tai Road
Kowloon Bay, Hong Kong
Tel: (852) 2610 1025, Fax: (852) 3579 1404
Email: customerservices@miele.com.hk
Website: www.miele.hk
India
Miele India Pvt. Ltd.
Ground Floor, Copia Corporate Suites
Plot No. 9, Jasola, New Delhi - 110025
Tel: 011-46 900 000, Fax: 011-46 900 001
E-mail: customercare@miele.in, Internet: www.miele.in
Ireland
Miele Ireland Ltd.
2024 Bianconi Avenue
Citywest Business Campus, Dublin 24
Tel: (01) 461 07 10, Fax: (01) 461 07 97
E-Mail: info@miele.ie, Internet: www.miele.ie
Manufacturer: Miele & Cie. KG
Carl-Miele-Straße 29, 33332 Gütersloh, Germany
Malaysia
Miele Sdn Bhd
Suite 12-2, Level 12
Menara Sapura Kencana Petroleum
Solaris Dutamas No. 1, Jalan Dutamas 1
50480 Kuala Lumpur, Malaysia
Phone: +603-6209-0288
Fax: +603-6205-3768
New Zealand
Miele New Zealand Limited
IRD 98 463 631
Level 2, 10 College Hill
Freemans Bay, Auckland 1011, NZ
Tel: 0800 464 353
Internet: www.miele.co.nz
Singapore
Miele Pte. Ltd.
163 Penang Road
# 04 - 03 Winsland House II
Singapore 238463
Tel: +65 6735 1191, Fax: +65 6735 1161
E-Mail: info@miele.com.sg
Internet: www.miele.sg
South Africa
Miele (Pty) Ltd
63 Peter Place, Bryanston 2194
P.O. Box 69434, Bryanston 2021
Tel: (011) 875 9000, Fax: (011) 875 9035
E-mail: info@miele.co.za
Internet: www.miele.co.za
United Arab Emirates
Miele Appliances Ltd.
Gold & Diamond Park
Office No. 217-6, Sheikh Zayed Road
P.O. Box 11 47 82 - Dubai
Tel: +971 4 3044 999
Fax: +971 4 3418 852
800-MIELE (64353)
E-Mail: info@miele.ae
Internet: www.miele.ae
K 28202 D ws, K 28202 D edt/cs

en-GB
M.-Nr. 10 538 950 / 00
Download PDF

advertising