Instructions for use for ENA Micro 5

de
en
fr
it
nl
es
pt
Instructions for use for ENA Micro 5
ru
Table of contents
Your ENA Micro 5
Control elements
30
Important information
32
Proper use................................................................................................................................................................32
For your safety........................................................................................................................................................32
1 Preparing and using for the first time
34
Setting up the machine.........................................................................................................................................34
Filling the bean container.....................................................................................................................................34
First-time use...........................................................................................................................................................35
First-time use with filter cartridge activation....................................................................................................35
First-time use without filter cartridge activation..............................................................................................36
Filling the water tank.............................................................................................................................................36
Determining the water hardness.........................................................................................................................36
2 Preparation
37
Rotating coffee spout............................................................................................................................................37
Ristretto, espresso and coffee..............................................................................................................................37
Permanently setting the amount of water for the cup size............................................................................38
Adjusting the grinder.............................................................................................................................................38
Ground coffee..........................................................................................................................................................39
3 Daily operation
39
Switching on the machine....................................................................................................................................39
Daily maintenance................................................................................................................................................. 40
Switching off the machine................................................................................................................................... 40
4 Permanent settings in programming mode
40
Inserting and activating the filter....................................................................................................................... 40
Setting the water hardness................................................................................................................................... 41
5 Maintenance
41
Cleaning the machine............................................................................................................................................ 41
Descaling the machine .........................................................................................................................................42
Changing the filter.................................................................................................................................................43
Descaling the water tank...................................................................................................................................... 44
Cleaning the bean container............................................................................................................................... 44
6 Messages on symbol display
45
7 Troubleshooting
46
8 Transport and environmentally friendly disposal
47
Transport / Emptying the system........................................................................................................................47
Disposal....................................................................................................................................................................47
9 Technical data
47
10 Index
48
11 JURA contact details / Legal information
50
28
de
Table of contents
en
fr
it
nl
es
Symbol description
Warnings
J WARNING
J CAUTION
CAUTION
Always take note of any information marked with the words CAUTION or WARNING
and a warning sign. The signal word WARNING draws your attention to potential
serious injury, and the signal word CAUTION to potential minor injury.
pt
CAUTION draws your attention to potential damage to the machine.
Symbols used
T
Prompt to take action. This symbol means that you are being prompted to perform
some action.
E
Information and tips to make it even easier to use your ENA.
ru
29
Control elements
Control elements
1
5
6
7
2
8
3
4
9
1
2
3
4
30
Water tank
Mains cable (back of the machine)
Coffee grounds container
Drip tray
5
6
7
8
9
Bean container with aroma preservation cover
Ventilation slots
On/Off button
Rotating coffee spout (height-adjustable)
Cup grille
de
Control elements
en
3
1
4
2
fr
1 Cover for powder chute for ground coffee
2 Powder chute for ground coffee
3 Cover cap for grinder adjustment switch
4 Grinder adjustment switch
it
nl
1
es
1 Symbol display
& Descaling symbol
! Filter symbol
L Cleaning symbol
M Water Tank symbol
v Ground Coffee symbol
? Coffee Grounds Container symbol
;
_
Y
<
>
Coffee strength ‘normal’
Coffee strength ‘strong’
Ristretto symbol
Espresso symbol
Coffee symbol
pt
ru
31
Important information
Important information
Proper use
The machine is designed and
intended for private domestic use. It
is designed solely for the preparation of coffee. Use for any other
purpose will be deemed improper.
JURA Elektroapparate AG cannot
accept any responsibility for the
consequences of improper use.
Before using the machine read
these instructions for use thoroughly and completely and comply
with the instructions they contain.
A warranty service is not applicable
for damage or defects caused by
non-compliance with the instructions for use. Keep these instructions for use close to the machine
and pass them on to the next user.
For your safety
Please carefully read and observe
the important safety information
set out below.
To avoid danger of potentially fatal
electric shock:
UU Never use a machine which is
damaged or has a defective
mains cable.
UU In the event of signs of damage,
for example if there is a smell of
32
UU
UU
UU
UU
burning, unplug the machine
immediately from the mains
supply and contact JURA service.
If the mains cable of this
machine is damaged, it must be
repaired either directly by JURA
or by an authorised JURA service
centre.
Make sure that the ENA and the
mains cable are not located close
to hot surfaces.
Be careful to ensure that the
mains cable is not trapped and
does not rub against sharp
edges.
Never open and repair the
machine yourself. Do not modify
the machine in any way that is
not described in these instructions for use. The machine
contains live parts. If opened,
there is a danger of potentially
fatal injury. Repairs may only be
carried out by authorised JURA
service centres, using original
spare parts and accessories.
A defective machine is not safe and
could cause injury or fire. To avoid
damage and any associated risk of
injury or fire:
UU Never allow the mains cable to
loosely hang down. The mains
cable could pose a tripping
hazard or become damaged.
de
Important information
UU Protect the ENA from environUU
UU
UU
UU
UU
UU
UU
mental influences such as rain,
frost and direct sunlight.
Do not immerse the ENA, mains
cable or connections in water.
Do not put the ENA or any
individual parts in the dishwasher.
Switch your ENA off before cleaning work with the On/Off button.
Always wipe the ENA with a
damp cloth rather than a wet
one, and protect it from prolonged exposure to water splash.
Only connect the machine to the
mains voltage in accordance
with the information on the
rating plate. The rating plate is
located on the underside of your
ENA. Further technical data is
provided in these instructions for
use (see Chapter 9 ‘Technical
data’).
Please only use original JURA
maintenance products. Use of
products that are not explicitly
recommended by JURA could
damage the ENA.
Do not use any coffee beans
treated with additives or caramelised coffee beans.
Only fill the water tank with
fresh, cold water.
UU Do not fill the bean container
UU
UU
UU
UU
UU
with water.
Switch the machine off with the
On/Off button if you are going to
be absent for a longer period of
time and remove the mains plug
from the power socket.
Children may not clean or service the machine unless supervised by a responsible person.
Do not allow children to play
with the machine.
Keep children under the age of 8
away from the machine, or
supervise them constantly.
Children aged 8 and over may
only operate the machine without supervision if they have been
instructed in how to use it safely.
Children must be able to recognise and understand the potential dangers arising from incorrect use.
People, including children, who
UU do not have the physical, sensory or mental capabilities to use
the machine safely or
UU are inexperienced or lack knowledge in how to use the machine
safely
must be supervised by a responsible person when using it, or must
be instructed in how to use it
correctly.
33
en
fr
it
nl
es
pt
ru
1 Preparing and using for the first time
Safety when handling the CLARIS
Blue filter cartridge:
UU Filter cartridges should be kept
out of the reach of children.
UU Store filter cartridges in a dry
place in the sealed packaging.
UU Protect cartridges from heat and
direct sunlight.
UU Do not use damaged filter
cartridges.
UU Do not open filter cartridges.
1 Preparing and using for the
first time
This chapter provides you with the information
you need to use your ENA without any problems.
You will prepare your ENA step-by-step to enjoy
your first perfect cup of coffee.
EE Visit us on the internet. On the JURA
website (www.jura.com) you will find
interesting and up-to-date information on
your ENA and every aspect of coffee.
Setting up the machine
When setting up your ENA, please note the
following:
Place the machine on a horizontal surface that
is not sensitive to water.
Choose a spot for your ENA which protects the
machine against overheating. Ensure that the
ventilation slots are not covered.
UU
UU
Filling the bean container
CAUTION
Coffee beans which have been treated with
additives (e.g. sugar), ground coffee or freeze-dried
coffee will damage the grinder.
T Only use roasted, untreated coffee beans to
fill the bean container.
T Remove the aroma preservation cover of the
bean container.
T Remove any dirt or foreign objects from
inside the bean container.
T Fill the bean container with coffee beans.
T Close the bean container.
34
de
1 Preparing and using for the first time
First-time use
When using the machine for the first time, you can
choose whether you want to operate ENA with or
without the CLARIS Blue filter cartridge. If the
water hardness is 10 °dH or more, we recommend
using the filter cartridge. If you do not know the
hardness of your water, you can find this out first
(see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
First-time use with filter cartridge
activation
! T Touch the Filter symbol.
The Water Tank symbol M lights up.
T Remove the water tank.
T Open the filter holder.
T Insert the filter cartridge into the water tank,
exerting slight pressure.
en
fr
EE The On/Off button also acts as a power
switch. When the ENA is switched off, the
machine does not consume standby energy.
J WARNING
If the machine is operated with a defective mains
cable, there is a danger of potentially fatal electric
shock.
T Never use a machine which is damaged or
has a defective mains cable.
Precondition: Bean container is filled.
T Insert the mains plug into a power socket.
Q T Press the On/Off button to switch the
machine on.
The Descaling symbol & and the Filter
symbol ! are lit up.
EE Now decide whether you want to operate
your ENA with or without a CLARIS Blue
filter cartridge.
it
T Close the filter holder. It will click into place
audibly.
EE After two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
T Fill the water tank with fresh, cold water and
reinsert it.
The Filter symbol ! lights up.
! T Touch the Filter symbol.
The Y, <, > and ! symbols flash. The filter
is rinsed and the water flows directly into the
drip tray.
Rinsing of the filter stops automatically. The
machine heats up.
The Y, < and > symbols flash. The
machine is rinsed, water flows out of the
coffee spout. The rinse stops automatically.
The Coffee Grounds Container symbol ?
lights up.
T Empty the coffee grounds container and
drip tray and rinse with warm water.
T Reinsert the coffee grounds container and
the drip tray.
The Ristretto Y, Espresso < and Coffee >
symbols and the symbol for ‘strong’ coffee
strength _ light up. Your ENA is ready for
use.
35
nl
es
pt
ru
1 Preparing and using for the first time
First-time use without filter cartridge
activation
If you do not want to use the CLARIS Blue filter
cartridge, you will need to set the water hardness.
The following water hardness settings are available:
Water hardness
Symbol(s) shown in display
Level 1:
1–15 °dH
1 symbol illuminated
Y
Level 2:
16-23 °dH
2 symbols illuminated
Y<
Level 3:
24-30 °dH
3 symbols illuminated
Y<>
& T Touch the Descaling symbol.
The Y, < and & symbols light up.
T Touch the Y, < or > symbol to set the
water hardness, e.g. symbol Y for ‘level 1’.
The Y and & symbols light up.
& T Touch the Descaling symbol.
The Water Tank symbol M lights up.
T Place a receptacle under the coffee spout.
T Remove the water tank.
T Fill the water tank with fresh, cold water and
reinsert it.
Filling the water tank
Daily maintenance of the machine and hygiene
when handling coffee and water are key to a
perfect coffee result in the cup every time. You
should therefore change the water daily.
CAUTION
Milk, sparkling mineral water or other liquids can
damage the water tank or the machine.
T Only fill the water tank with fresh, cold water.
T Remove the water tank and rinse with cold
water.
T Fill the water tank with fresh, cold water and
reinsert it.
Determining the water hardness
The Y, < and > symbols flash. The system
fills with water and the water flows directly
into the drip tray.
The operation stops automatically. The
machine heats up.
The Y, < and > symbols flash. The
machine is rinsed, water flows out of the
coffee spout. The rinse stops automatically.
The Ristretto Y, Espresso <, Coffee > and
Coffee strength ‘strong’ _ symbols light up.
Your ENA is ready for use.
You can find out what the water hardness is by
using the Aquadur® test strip supplied as standard.
T Hold the test strip briefly (for one second)
under running water.
T Shake off the water.
T Wait for about one minute.
T You will then be able to read the degree of
water hardness from the discolouration of
the Aquadur® test strip and the description
on the packaging.
The water hardness can now be set.
36
de
2 Preparation
2 Preparation
EE While a speciality coffee is being prepared,
you can stop preparation at any time. Simply
touch the symbol for the product in
question.
EE If preparing two speciality coffees, you have
to stop each brewing operation separately.
EE Before and during the grinding operation
you can select the coffee strength of the
ristretto Y, espresso < and coffee >
speciality coffees: ‘normal’ (;), ‘strong’ (_).
The machine always uses the preset amount of
water for the type of coffee in question. You can
change this setting (see Chapter 2 ‘Preparation –
Permanently setting the amount of water for the
cup size’).
Your ENA has an Energy Save Mode: Soon after
the last preparation, the ENA stops heating up.
To indicate that the machine is in energy-saving
mode, after about 5 minutes the brightness of all
the symbols is reduced. The ENA must heat back
up before the next preparation.
UU
‘2 cups’ position
en
EE The two coffee spout positions clearly
engage.
EE If the coffee spout is in the ‘2 cups’ position,
the desired speciality coffee is prepared
twice in succession. The coffee strength can
only be set before the first product is
prepared.
fr
it
Ristretto, espresso and coffee
Ristretto Y, espresso < and coffee > are
prepared following this model.
Example: Proceed as follows to prepare one coffee.
Precondition: Your ENA is ready for use.
nl
T Turn the coffee spout to the ‘1 cup’ position.
Coffee tastes best served hot. A cold porcelain cup
cools the beverage – and impairs the taste. We
therefore recommend prewarming the cups. The
full coffee aroma can develop only in prewarmed
cups. You can purchase a JURA cup warmer from
your specialised dealer.
es
Rotating coffee spout
Your ENA has a rotating coffee spout for preparing
one or two cups of your desired speciality coffee:
‘1 cup’ position
UU
T Place a cup under the coffee spout.
> T Touch the Coffee symbol to start preparation.
The Coffee > and Coffee strength (; or _)
symbols flash, the preset amount of water
flows into the cup.
Preparation stops automatically. Your ENA is
once more ready for use.
EE To prepare two coffees, turn the coffee
spout to the ‘2 cups’ position. Press the
Coffee symbol > to start preparation of
two cups.
37
pt
ru
2 Preparation
Permanently setting the amount of water
for the cup size
It is easy to make permanent settings for the
amount of water for all speciality coffees according
to the cup size. Adjust the amount once as shown
in the following example. Every time you prepare a
drink in the future, this amount of water will be
dispensed.
EE The process for adapting the amount of
water to the cup size only works when
preparing one cup. When two cups are
prepared, the set amount is doubled.
Example: Permanently adjust the amount of
espresso to the cup size.
Precondition: Your ENA is ready for use.
T Turn the coffee spout to the ‘1 cup’ position.
Adjusting the grinder
You can adjust the grinder on a continuous scale to
suit the degree of roast of your coffee.
CAUTION
If you adjust the consistency of grind when the
grinder is not operating, the grinder adjustment
switch could be damaged.
T Only adjust the consistency of grind when
the grinder is running.
EE For a coarser consistency of grind, turn the
switch to the left, for a finer grind, turn it to
the right.
The consistency of grind is correct if the coffee
flows regularly from the coffee spout. In addition a
fine, thick crema forms.
Example: Change the consistency of grind during
the preparation of a ‘strong’ espresso.
T Turn the coffee spout to the ‘1 cup’ position.
T Place a cup under the dual spout.
< T Touch the Espresso symbol for about
3 seconds until the Ristretto Y and
Coffee > symbols appear again.
< T Release the Espresso symbol.
The espresso is prepared. The Espresso <
and Coffee strength symbols (; or _) flash.
< T Touch the Espresso symbol as soon as there
is enough espresso in the cup.
Preparation stops. The amount of water for
one espresso is permanently stored.
The Espresso < and Coffee strength
symbols (; or _) flash until the machine is
ready for use again.
EE You can alter this setting at any time by
repeating the above procedure.
38
T Place a cup under the coffee spout.
T Open the cover of the grinder adjustment
switch.
_ T Touch the Coffee strength ‘strong’ symbol.
The Coffee strength ‘strong’ _ symbol lights
up.
de
3 Daily operation
< T Touch the Espresso symbol to start
preparation.
T Turn the grinder adjustment switch to the
desired position while the grinder is
running.
The preset amount of water flows into the
cup. Preparation stops automatically.
T Place the filler funnel for ground coffee on
the powder chute.
en
EE Please note that changing the consistency of
grind only takes effect for the second coffee
preparation.
Ground coffee
You can choose to use a second coffee variety, for
example decaffeinated coffee, with the powder
chute for ground coffee.
EE Use ground coffee which is not ground too
finely. Very fine coffee can block up the
system so that the coffee only comes out in
drips.
EE It is not possible to prepare two cups with
ground coffee. If the coffee spout is in the
‘2 cups’ position, just one cup is prepared.
EE Never add more than one level measuring
spoon of ground coffee.
EE The desired speciality coffee must be
prepared within approximately one minute
after filling with the ground coffee.
Otherwise the ENA stops the operation and
is once more ready for use.
EE If you did not add a sufficient amount of
ground coffee, the Y, <, > and v symbols
flash and the ENA stops the operation.
All speciality coffees with ground coffee are
prepared following this model.
Example: Prepare a cup of coffee using ground
coffee.
Precondition: Your ENA is ready for use.
T Place a cup under the coffee spout.
T Open the powder chute for ground coffee.
The Ground Coffee symbol v lights up.
fr
T Place one level measuring spoon of ground
coffee into the filler funnel.
T Close the powder chute for ground coffee.
The Y, <, > and v symbols flash.
The Y, < and > symbols light up.
> T Touch the Coffee symbol to start preparation.
The Coffee symbol > flashes, the preset
amount of water flows into the cup.
Preparation stops automatically. Your ENA is
once more ready for use.
it
nl
3 Daily operation
Switching on the machine
es
Daily maintenance of the machine and hygiene
when handling coffee and water are key to a
perfect coffee result in the cup every time. You
should therefore change the water daily.
When the machine is switched on, it is automatically rinsed.
T Place a receptacle under the coffee spout.
Q T Press the On/Off button to switch the
machine on.
The Y, < and > symbols flash, the
machine heats up.
The machine is rinsed, water flows out of the
coffee spout. The rinse stops automatically.
Your ENA is ready for use.
39
pt
ru
4 Permanent settings in programming mode
Daily maintenance
To ensure that you get many years of reliable
service out of your ENA and to guarantee the
optimum coffee quality, the machine requires daily
maintenance.
T Remove the drip tray.
T Empty the coffee grounds container and
drip tray and rinse with warm water.
EE Always empty the coffee grounds container
when the machine is switched on. This is
the only way of resetting the coffee grounds
counter.
T Reinsert the coffee grounds container and
the drip tray.
T Rinse the water tank with clean water.
T Wipe the surface of the machine with a
clean, soft, damp cloth (e.g. microfibre
cloth).
Switching off the machine
When the ENA is switched off, the system is
automatically rinsed if a speciality coffee has been
prepared.
T Place a receptacle under the coffee spout.
Q T Press the On/Off button.
The Y, < and > symbols flash. The
machine is rinsed, water flows out of the
coffee spout.
The rinse stops automatically. Your ENA is
switched off.
EE When the ENA is switched off with the On/
Off button, the machine does not consume
standby energy.
EE If no action is performed on the machine for
2 hours, the ENA will automatically switch
off to save energy.
4 Permanent settings in programming mode
Inserting and activating the filter
Your ENA no longer has to be descaled if you are
using the CLARIS Blue filter cartridge. If you did not
activate the filter cartridge the first time you used
the machine, you can do this now as follows.
EE Perform the ‘inserting the filter’ operation
without any interruptions. This will ensure
that your ENA always produces its best.
Precondition: Your ENA is ready for use.
T Touch the ; and _ symbols for approximately 2 seconds.
The ;, _, & and L symbols light up brightly.
! T Touch the Filter symbol for approximately
2 seconds.
The Water Tank symbol M lights up.
T Remove the water tank.
T Open the filter holder.
T Insert the filter cartridge into the water tank,
exerting slight pressure.
T Close the filter holder. It will click into place
audibly.
EE After two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
T Fill the water tank with fresh, cold water and
reinsert it.
The Coffee Grounds Container symbol ?
lights up.
40
de
5 Maintenance
T Empty the drip tray and coffee grounds
container and reinsert them.
The Filter symbol ! lights up.
! T Touch the Filter symbol to start rinsing of
the filter
The Y, <, > and ! symbols flash. The filter
is rinsed.
Rinsing of the filter stops automatically. The
Coffee Grounds Container symbol ? lights
up.
T Empty the drip tray and coffee grounds
container and reinsert them.
The Y, < and > symbols flash, the
machine heats up. Your ENA is once more
ready for use.
Setting the water hardness
EE If you are using the CLARIS Blue filter
cartridge and have activated it, there is no
need to set the water hardness.
The harder the water is, the more frequently the
ENA needs to be descaled. It is therefore important
to set the water hardness accurately.
& T Touch the Descaling symbol to confirm that
you want to set the water hardness to
‘level 3’.
Your ENA is once more ready for use.
en
5 Maintenance
Your ENA has the following integrated maintenance programmes:
Cleaning the machine
Descaling the machine
Changing the filter
fr
UU
UU
UU
Cleaning the machine
After 180 preparations or 80 switch-on rinses, the
ENA will prompt you to clean it.
CAUTION
If the wrong cleaning agent is used, the machine
could be damaged and/or traces could be left
behind in the water.
T Use only original JURA maintenance
products.
it
nl
The following water hardness settings are available:
Water hardness
Symbol(s) shown in
display
Level 1:
1–15 °dH
1 symbol illuminated
Y
Level 2:
16–23 °dH
2 symbols illuminated
Y<
Level 3:
24–30 °dH
3 symbols illuminated
Y<>
Example: Change the water hardness setting from
‘level 2’ (Y <) to ‘level 3’ (Y < >).
Precondition: Your ENA is ready for use.
T Touch the ; and _ symbols for approximately 2 seconds.
The ;, _, & and L symbols light up brightly.
& T Briefly touch the Descaling symbol.
The &, Y and < symbols light up.
> T Touch the Coffee symbol.
The &, Y, < and > symbols light up.
EE The cleaning programme lasts approximately 15 minutes.
EE Do not interrupt the cleaning programme.
The quality of cleaning will be impaired if
you do so.
EE JURA cleaning tablets are available from
specialised dealers.
es
Precondition: Your ENA is ready for use. The
Cleaning symbol L lights up.
T Turn the coffee spout to the ‘2 cups’
position.
pt
ru
41
5 Maintenance
L T Touch the Cleaning symbol for approximately 2 seconds.
The Coffee Grounds Container symbol ?
lights up.
T Empty the drip tray and coffee grounds
container and reinsert them.
The Cleaning symbol L lights up.
T Place a receptacle under the coffee spout.
L T Touch the Cleaning symbol.
The Y, <, > and L symbols flash, water
flows out of the coffee spout.
The operation is interrupted, the Ground
Coffee symbol v lights up.
T Open the powder chute for ground coffee
and drop in a JURA cleaning tablet.
T Close the powder chute for ground coffee.
The Cleaning symbol L lights up.
L T Touch the Cleaning symbol.
The Y, <, > and L symbols flash, water
flows out of the coffee spout several times.
The operation is interrupted, the Coffee
Grounds Container symbol ? lights up.
T Empty the drip tray and coffee grounds
container and reinsert them.
The Y, < and > symbols flash. The
machine heats up.
Your ENA is once more ready for use.
Cleaning the machine without a prompt: You can
initiate the 'Cleaning the machine' operation
manually at any time as long as the machine is
ready for use. Touch the ; and _ symbols
simultaneously for approx. 2 seconds. The ;, _,
L and & or ! symbols light up brightly. Continue
with the first prompt (indicated by T) as described
in this section.
42
Descaling the machine
The ENA builds up deposits of limescale over time
and automatically prompts you to descale it when
necessary. The degree of calcification depends on
the hardness of your water.
J CAUTION
If the descaling agent comes into contact with the
skin or eyes, this can cause irritation.
T Avoid contact with the skin or eyes.
T Rinse off the descaling agent with clean
water. Should you get any descaling agent in
your eye, see a doctor.
CAUTION
If the wrong descaling agent is used, the machine
could be damaged and/or traces could be left
behind in the water.
T Use only original JURA maintenance
products.
CAUTION
If the descaling operation is interrupted, there may
be damage to the machine.
T Allow the descaling programme to run to
the end.
CAUTION
If the descaling agent comes into contact with
sensitive surfaces (e.g. marble), damage cannot be
ruled out.
T Clean up any splashes immediately.
EE The descaling programme lasts approximately 40 minutes.
EE JURA descaling tablets are available from
specialised dealers.
EE If you use a CLARIS Blue filter cartridge and
this is activated, you will not be prompted to
descale.
Precondition: Your ENA is ready for use. The
Descaling symbol & lights up.
& T Touch the Descaling symbol for approximately 2 seconds.
The Coffee Grounds Container symbol ?
lights up.
de
5 Maintenance
T Empty the drip tray and coffee grounds
container and reinsert them.
The Water Tank symbol M flashes.
T Remove and empty the water tank.
T Completely dissolve the contents of one blister (three JURA descaling tablets) in a
receptacle holding 500 ml of water. This may
take several minutes.
Descaling the machine without a prompt: You
can initiate the 'Descaling the machine' operation
manually at any time as long as the machine is
ready for use. Touch the ; and _ symbols
simultaneously for approx. 2 seconds. The ;, _,
L and & symbols light up brightly. Continue with
the first prompt (indicated by T) as described in
this section.
Changing the filter
T Pour the solution into the empty water tank
and reinsert the tank.
The Descaling symbol & lights up.
& T Touch the Descaling symbol.
The Y, <, > and & symbols flash, water
flows directly into the drip tray.
The operation is interrupted, the Coffee
Grounds Container symbol ? flashes.
T Empty the drip tray and coffee grounds
container and reinsert them.
The Water Tank symbol M lights up.
T Remove the water tank and rinse thoroughly.
T Fill the water tank with fresh, cold water and
reinsert it.
The Descaling symbol & lights up.
& T Touch the Descaling symbol.
The Y, <, > and & symbols flash, water
flows directly into the drip tray.
The Y, < and > symbols flash, water flows
out of the drip tray.
The operation is interrupted, the Coffee
Grounds Container symbol ? lights up.
T Empty the drip tray and coffee grounds
container and reinsert them.
Your ENA is once more ready for use.
EE If the descaling operation stops unexpectedly, rinse the water tank thoroughly.
en
fr
EE After 50 litres of water have flowed through,
the filter will cease to work. Your ENA will
automatically prompt you to change the
filter.
EE After two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
EE If the CLARIS Blue filter cartridge is not
activated in programming mode, you will
not be prompted to change the filter.
Precondition: Your ENA is ready for use. The Filter
symbol ! lights up.
! T Touch the Filter symbol for approximately
2 seconds.
The Water Tank symbol M lights up.
T Remove the water tank.
T Open the filter holder and remove the old filter cartridge.
T Insert a new filter cartridge into the water
tank, exerting slight pressure.
it
nl
es
pt
T Close the filter holder. It will click into place
audibly.
EE After two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
43
ru
5 Maintenance
T Fill the water tank with fresh, cold water and
reinsert it.
The Coffee Grounds Container symbol ?
lights up.
T Empty the drip tray and coffee grounds
container and reinsert them.
The Filter symbol ! lights up.
! T Touch the Filter symbol to start rinsing of
the filter.
The Y, <, > and ! symbols flash. The filter
is rinsed. Water flows directly into the drip
tray.
Rinsing of the filter stops automatically. The
Coffee Grounds Container symbol ? lights
up.
T Empty the drip tray and coffee grounds
container and reinsert them.
The machine heats up. Your ENA is once
more ready for use.
Changing the filter without a prompt: If the filter
is activated, you can initiate the 'Changing the
filter' operation manually at any time as long as
the machine is ready for use. Touch the ; and _
symbols simultaneously for approx. 2 seconds.
The ;, _, L and ! symbols light up brightly.
Continue with the first prompt (indicated by T) as
described in this section.
Descaling the water tank
Limescale deposits may form in the water tank. To
ensure correct function of the machine, descale
the water tank from time to time.
T Remove the water tank.
T If you use a CLARIS Blue filter cartridge,
remove it.
T Descale the tank with a mild conventional
descaling agent in accordance with the
manufacturer's instructions.
T Rinse the water tank thoroughly.
T If you use a CLARIS Blue filter cartridge,
reinsert it.
T Fill the water tank with fresh, cold water and
reinsert it.
44
Cleaning the bean container
Coffee beans may be covered with a slight oil film
which remains on the walls of the bean container.
These traces may negatively affect the coffee
result. For this reason clean the bean container
from time to time.
Q T Press the On/Off button to switch the
machine off.
T Disconnect the mains plug.
T Remove the bean container cover.
T Remove the coffee beans with a vacuum
cleaner.
T Clean the bean container with a soft, dry
cloth.
T Fill the bean container with fresh coffee
beans, then close the bean container cover.
de
6 Messages on symbol display
6 Messages on symbol display
Message (Symbol(s) shown
in display)
Cause/Result
Action
The Water Tank symbol M
lights up.
The water tank is empty or not
correctly inserted. You cannot
prepare any products.
T Fill the water tank (see Chapter 1
‘Preparing and using for the first
time – Filling the water tank’).
T Insert the water tank.
The Coffee Grounds
Container symbol ? lights
up.
The coffee grounds container is
full. No speciality coffees can
be prepared.
T Empty the coffee grounds
container and the drip tray (see
Chapter 3 ‘Daily operation – Daily
maintenance’).
The Coffee Grounds
Container symbol ? flashes.
The drip tray is not inserted
correctly or is not inserted at
all. You cannot prepare any
products.
T Insert the drip tray.
The Y, <, >, ; and _
symbols flash.
The aroma preservation cover
for the bean container is not
fitted or not fitted correctly.
T Fit the aroma preservation cover
correctly.
The ;, _, L and & or !
symbols light up brightly.
You are in programming mode.
T Touch the ; or _ symbol to exit
programming mode. Your ENA is
once more ready for use.
The ENA is ready for use and
the Cleaning symbol L lights
up.
The ENA is prompting you to
clean it.
T Perform cleaning (see Chapter 5
‘Maintenance – Cleaning the
machine’).
The ENA is ready for use and
the Descaling symbol & lights
up.
The ENA is prompting you to
descale it.
T Perform descaling (see Chapter 5
‘Maintenance – Descaling the
machine ’).
The ENA is ready for use and
the Filter symbol ! lights up.
After 50 litres of water have
flowed through the CLARIS
Blue filter cartridge, it will cease
to work.
T Replace the CLARIS Blue filter
cartridge (see Chapter 5 ‘Maintenance – Changing the filter’).
Preparing ground coffee:
after ground coffee is added
to the machine, the Y, <, >
and v symbols flash briefly.
There is insufficient ground
coffee in the machine; the ENA
stops the operation.
T The next time you prepare a
beverage, add more ground coffee
(see Chapter 2 ‘Preparation –
Ground coffee’).
en
fr
it
nl
es
pt
ru
45
7 Troubleshooting
7 Troubleshooting
Problem
Cause/Result
Action
Coffee only comes out in drips
when it is being prepared.
Coffee or ground coffee
has been ground too finely
and is blocking the
system.
T Set the grinder to a coarser setting
or use coarser ground coffee (see
Chapter 2 ‘Preparation – Adjusting
the grinder’).
The Water Tank symbol M lights
up even though the tank is full.
The water tank float is
trapped.
T Descale the water tank (see
Chapter 5 ‘Maintenance –
Descaling the water tank’).
The ; and _ symbols flash
alternately.
The system must be filled
with water.
T Fill the water tank (see Chapter 1
‘Preparing and using for the first
time – Filling the water tank’).
T Touch the ; or _ symbol.
The system fills up with water.
Grinder is making a very loud
noise.
There are foreign objects
in the grinder.
T Contact customer support in your
country (see Chapter 11 ‘JURA contact
details / Legal information’).
When the ENA is switched on,
the Cleaning symbol L flashes
for 5 seconds. The machine then
switches off.
If the machine was
exposed to the cold for a
long period of time,
heating is disabled for
safety reasons.
T Warm the machine at room
temperature.
When the ENA is switched on,
one of the symbols (other than
L) flashes for 5 seconds. The
machine then switches off.
EE If you were unable to solve the problem,
contact customer support in your country
(see Chapter 11 ‘JURA contact details / Legal
information’).
46
–
T Contact customer support in your
country (see Chapter 11 ‘JURA contact
details / Legal information’).
de
8 Transport and environmentally friendly disposal
8 Transport and environmentally 9 Technical data
friendly disposal
Transport / Emptying the system
Keep the packaging for your ENA. It should be used
to protect the machine during transport.
In order to protect the ENA from frost during
transport, the system must be emptied.
Precondition: Your ENA is ready for use.
T Place a receptacle under the coffee spout.
T Touch the ; and _ symbols for approximately 2 seconds.
The ;, _, L and & or ! symbols light up
brightly.
T Remove and empty the water tank.
The <, > and M symbols light up.
< T Touch the Espresso symbol.
Hot water will continue to flow until the
system is empty.
The Water Tank symbol M lights up.
Q T Press the On/Off button to switch the
machine off.
Disposal
Please dispose of old machines in an environmentally neutral way.
H
Old machines contain valuable, recyclable
materials which should be recycled. Please
therefore dispose of old machines via suitable
collection systems.
Voltage
220–240 V ~,
50 Hz
Power
1450 W
Conformity mark
AS
Energy consumption
Energy Save Mode ‘on’
(display symbols slightly
less bright)
approx. 4.0 Wh
Pump pressure
Static, max. 15 bar
Holding capacity of water
tank (without filter)
1.1 l
Holding capacity of bean
container
125 g
Holding capacity of coffee
grounds container
approx. 9 servings
Cable length
approx. 1.1 m
Weight
approx. 8.9 kg
Dimensions (W × H × D)
23 × 32.3 × 44.5 cm
en
fr
Information for testers (repeat test in accordance
with DIN VDE 0701-0702): The central grounding
point (CGP) is located on the underside of the
machine, right next to the mains cable's connection point.
it
nl
es
pt
ru
47
10 Index
10 Index
A
B
C
D
Addresses 50
Aroma preservation cover
Bean container with aroma preservation cover
30
E
Bean container
Bean container with aroma preservation cover
30
Cleaning 44
Filling 34
Bus bar
Technical data 47
Button
On/Off button 30
F
Central grounding point 47
CLARIS Blue filter cartridge
Changing 43
Inserting and activating the filter 40
Cleaning
Bean container 44
Machine 41
Coffee 37
Coffee grounds container 30
Coffee spout
Rotating coffee spout 30, 37
Consistency of grind
Adjusting the grinder 38
Grinder adjustment switch 31
Contact details 50
Cup grille 30
Customer support 50
G
Descaling
Machine 42
Water tank 44
Display
Symbol display 31
Display, messages 45
Disposal 47
Drip tray 30
48
H
I
J
Emptying the system 47
Energy Save Mode 37
Errors
Troubleshooting 46
Espresso 37
Filling
Bean container 34
Water tank 36
Filter
Changing 43
Inserting and activating the filter 40
First-time use 35
With filter cartridge activation 35
Without filter cartridge activation 36
Grinder adjustment switch 31
Ground coffee 39
Powder chute for ground coffee 31
Grounding point 47
Hotline 50
Instant coffee
Ground coffee 39
Internet 34
JURA
Contact details 50
Internet 34
Website 34
M
Machine
Cleaning 41
Descaling 42
Setting up 34
Switching off 40
Switching on 39
Mains cable 30
Maintenance 41
Daily maintenance 40
Messages on display 45
de
10 Index
P
R
S
Permanently setting the water for the cup size
38
Permanent settings in programming mode 40
Powder chute
Powder chute for ground coffee 31
Preparation 37
Coffee 37
Espresso 37
Ground coffee 39
Ristretto 37
Problems
Troubleshooting 46
Programming mode 40
Setting the water hardness 41
Proper use 32
Ristretto 37
T
U
V
en
Technical data 47
Tel 50
Transport 47
Troubleshooting 46
Use, First-time 35
fr
Ventilation slots 30
W
Water hardness
Determining the water hardness 36
Setting the water hardness 41
Water tank 30
Descaling 44
Filling 36
Website 34
it
Safety 32
Safety information 32
Settings
Permanent settings in programming mode
40
Setting up
Setting up the machine 34
Switching off 40
Switching on 39
Symbol
Cleaning 31
Coffee 31
Coffee Grounds Container 31
Coffee strength 31
Descaling 31
Espresso 31
Filter 31
Ground Coffee 31
Ristretto 31
Water Tank 31
Symbol description 29
Symbol display 31
Messages 45
nl
es
pt
ru
49
J71143/ENA Micro 5/de-ru/201601
11 JURA contact details / Legal information
11 JURA contact details / Legal
information
JURA Elektroapparate AG
Kaffeeweltstrasse 10
CH-4626 Niederbuchsiten
Tel. +41 (0)62 38 98 233
@@ You will find additional contact details for
your country at www.jura.com.
Directives
The machine complies with the following
directives:
2014/35/EU – Low Voltage Directive
2014/30/EU – Electromagnetic Compatibility
2009/125/EC – Ecodesign Directive
2011/65/EU – RoHs Directive
UU
UU
UU
UU
Technical changes
We reserve the right to make technical changes.
The diagrams used in these instructions for use are
for illustration purposes only and do not represent
the original colours of the machine. Some details
of your ENA may vary.
Feedback
Your opinion is important to us! Use the contact
details at www.jura.com.
Copyright
The instructions for use contain information which
is protected by copyright. It is not permitted to
photocopy these instructions for use or translate
them into another language without the prior
written consent of JURA Elektroapparate AG.
50