SF 2H­A
Printed: 16.10.2015 | Doc-Nr: PUB / 5251748 / 000 / 00
English
Français
Dansk
Svenska
Norsk
Suomi
Eesti
Latviešu
Lietuvių
Русский
Українська
Қазақ
Türkçe
‫ﻋﺮﺑ ﻲ‬
en
fr
da
sv
no
fi
et
lv
lt
ru
uk
kk
tr
ar
日本語
한국어
繁體中文
中文
ja
ko
zh
cn
1
Printed: 16.10.2015 | Doc-Nr: PUB / 5251748 / 000 / 00
2
3
4
5
Printed: 16.10.2015 | Doc-Nr: PUB / 5251748 / 000 / 00
6
7
Printed: 16.10.2015 | Doc-Nr: PUB / 5251748 / 000 / 00
SF 2H­A
en
fr
da
sv
no
fi
et
lv
lt
ru
uk
kk
tr
ar
ja
ko
zh
cn
Original operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Mode d'emploi original . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Original brugsanvisning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Originalbruksanvisning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Original bruksanvisning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Alkuperäiset ohjeet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Algupärane kasutusjuhend . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Oriģinālā lietošanas instrukcija . . . . . . . . . . . . . . . . . . . . . . . . 109
Originali naudojimo instrukcija . . . . . . . . . . . . . . . . . . . . . . . . 125
Оригинальное руководство по эксплуатации . . . . . . . . . . . 141
Оригінальна інструкція з експлуатації . . . . . . . . . . . . . . . . . 160
Түпнұсқа пайдалану бойынша нұсқаулық . . . . . . . . . . . . . 179
Orijinal kullanım kılavuzu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
‫ ﺩﻟﻴﻞ ﺍﻻﺳﺘﻌﻤﺎﻝ ﺍﻷﺻﻠﻲ‬. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
オリジナル取扱説明書
오리지널 사용설명서 .
原始操作說明 . . . . . . .
原版操作说明 . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Printed: 16.10.2015 | Doc-Nr: PUB / 5251748 / 000 / 00
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
227
242
257
270
1 Information about the documentation
1.1 Conventions
1.1.1 Warning signs
The following warning signs are used:
General warning
1.1.2 Symbols
The following symbols are used:
Read the operating instructions before use.
Instructions for use and other useful information
Rated speed under no load
Revolutions per minute
Direct current (DC)
Screwdriving
Drilling without hammering
Drilling with hammering action (hammer drilling)
1.1.3 Typographical emphasis
The following typographical features are used to emphasize important
passages in the technical documentation about your drill/driver:
1
These numbers refer to the corresponding illustrations.
1.2 About this documentation
▶ Read these operating instructions before the product is used or operated
for the first time. This is a is a prerequisite for safe, trouble-free handling
and use of the product.
▶ Observe the safety instructions and warnings printed in this documentation and on the tool.
▶ Always keep the operating instructions with the tool and make sure that
the operating instructions are with the tool when it is given to other
persons.
1.3 Product information
The type designation can be found on the type identification plate at the
base of the tool and the serial number on the side of the casing.
▶ Make a note of this data in the following table and always refer to it when
making an enquiry to your Hilti representative or Hilti Service Center.
1
Printed: 16.10.2015 | Doc-Nr: PUB / 5251748 / 000 / 00
Product information
Type:
Generation:
01
Serial no.:
2 Safety
2.1 Warnings
The purpose of warnings
Warnings alert persons to hazards that occur when handling or using the
product.
Description of the key words used
DANGER
Draws attention to imminent danger that will lead to serious personal
injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that could lead to
serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that could lead to
slight personal injury or damage to the equipment or other property.
2.2 Safety instructions
The safety rules given in the following section contain all general safety rules
for electric tools which, in accordance with the applicable standards, require
to be listed in the operating instructions. Accordingly, some of the rules
listed may not be relevant to this electric tool.
2.2.1 General power tool safety warnings
WARNING
Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
Work area safety
▶ Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
▶ Do not operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
▶ Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2
Printed: 16.10.2015 | Doc-Nr: PUB / 5251748 / 000 / 00
Electrical safety
▶ Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will reduce risk of electric
shock.
▶ Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
▶ Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
▶ Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the risk
of electric shock.
▶ When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk
of electric shock.
▶ If operating a power tool in a damp location is unavoidable, use
a residual current device (RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
Personal safety
▶ Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in serious personal
injury.
▶ Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
▶ Prevent unintentional starting. Ensure the switch is in the off‐position
before connecting to power source and/or battery pack, picking up
or carrying the tool. Carrying power tools with your finger on the switch
or energising power tools that have the switch on invites accidents.
▶ Remove any adjusting key or wrench before turning the power tool
on. A wrench or a key left attached to a rotating part of the power tool
may result in personal injury.
▶ Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
▶ Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts.
3
Printed: 16.10.2015 | Doc-Nr: PUB / 5251748 / 000 / 00
▶ If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust-related hazards.
Power tool use and care
▶ Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the
rate for which it was designed.
▶ Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.
▶ Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
▶ Store idle power tools out of the reach of children and do not
allow persons unfamiliar with the power tool or these instructions
to operate the power tool. Power tools are dangerous in the hands of
untrained users.
▶ Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tool’s operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power
tools.
▶ Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
▶ Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and
the work to be performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
Battery tool use and care
▶ Recharge only with the charger specified by the manufacturer. A
charger that is suitable for one type of battery pack may create a risk of
fire when used with another battery pack.
▶ Use power tools only with specifically designated battery packs. Use
of any other battery packs may create a risk of injury and fire.
▶ When battery pack is not in use, keep it away from other metal
objects, like paper clips, coins, keys, nails, screws or other small
metal objects, that can make a connection from one terminal to
another. Shorting the battery terminals together may cause burns or a
fire.
▶ Under abusive conditions, liquid may be ejected from the battery;
avoid contact. If contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
4
Printed: 16.10.2015 | Doc-Nr: PUB / 5251748 / 000 / 00
Service
▶ Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
2.2.2 Drill safety warnings
▶ Use auxiliary handle(s), if supplied with the tool. Loss of control can
cause personal injury.
▶ Hold power tool by insulated gripping surfaces, when performing an
operation where the cutting accessory may contact hidden wiring.
Cutting accessory contacting a "live" wire may exposed metal parts of
the power tool "live" and could give the operator an electric shock.
2.2.3 Drill/driver safety warnings
▶ Hold power tool by insulated gripping surfaces, when performing an
operation where the fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.
2.2.4 Additional safety instructions
Personal safety
▶ Tampering with or modification of the tool is not permitted.
▶ Keep the grips dry, clean and free from oil and grease.
▶ Improve the blood circulation in your fingers by relaxing your hands
and exercising your fingers during breaks between working.
▶ Do not look directly into the light source (LEDs) integrated in the
drill/driver and do not direct the light at other persons’ faces. This
presents a risk of dazzling or eye damage.
▶ Avoid touching rotating parts. Switch the power tool on only after
bringing it into position at the workpiece. Touching rotating parts,
especially rotating drill bits or other accessory tools, may lead to injury.
▶ Wear protective gloves. The drill/driver may get hot during use. There is
a risk of injury (cutting or burning) if the accessory tool is touched while
changing it.
▶ Activate the safety lock (forward/reverse selector switch in the middle
position) when changing bits or batteries and before storage or transportation of the power tool.
▶ The power tool is not intended for use by debilitated persons who
have received no special training. Keep the power tool out of reach
of children.
▶ Dust from materials, such as paint containing lead, some wood species,
concrete / masonry / stone containing silica, and minerals as well as
metal, may be harmful. Contact with or inhalation of the dust may cause
allergic reactions and/or respiratory or other diseases to the operator
5
Printed: 16.10.2015 | Doc-Nr: PUB / 5251748 / 000 / 00
or bystanders. Certain kinds of dust are classified as carcinogenic
such as oak and beech dust, especially in conjunction with additives for
wood conditioning (chromate, wood preservative). Material containing
asbestos may be handled only by specialists. Use a dust removal
system whenever possible. To achieve a high level of dust collection,
use a suitable vacuum cleaner. When indicated, wear a respirator
appropriate for the type of dust generated. Ensure that the workplace
is well ventilated. Follow national requirements for the materials you
want to work with.
▶ Before beginning the work, check the hazard classification of the
dust that will be produced. Use an industrial vacuum cleaner with
an officially approved protection classification in compliance with
locally applicable dust protection regulations.
▶ Working on the material may cause it to splinter. Wear eye protection.
Flying fragments present a risk of injury to the body and eyes.
▶ Always hold the tool securely by the grip. If the accessory tool (e.g.
the drill bit) sticks and stalls, the power tool, due to its high torque, may
tend to rotate about its own axis in the direction opposite to that of the
accessory tool.
Use and care of electric tools
▶ Secure the workpiece. Use clamps or a vice to hold the workpiece
in position. The workpiece is thus held more securely than by hand and
both hands remain free to operate the power tool.
▶ Check that the accessory tools used are compatible with the chuck
system and that they are secured in the chuck correctly.
Use and care of battery-powered tools
▶ Check that the tool is switched off before inserting the battery.
Inserting a battery into an electric tool that is switched on can lead to
accidents.
▶ Do not expose batteries to high temperatures and keep them away
from fire. There is a risk of explosion.
▶ Do not disassemble, squash or incinerate batteries and do not subject
them to temperatures over 80°C. This presents a risk of fire, explosion
or injury through contact with caustic substances.
▶ Avoid ingress of moisture. Ingress of moisture may cause a short circuit,
resulting in burning injuries or fire.
▶ Observe the special guidelines applicable to the transport, storage
and use of Li-ion batteries.
▶ Avoid short circuiting the battery terminals. Check that the battery
terminals and the terminals in the power tool are free from foreign
objects before inserting the battery in the tool. Short circuiting the
battery terminals presents a risk of fire, explosion and chemical burns.
6
Printed: 16.10.2015 | Doc-Nr: PUB / 5251748 / 000 / 00
▶ Do not continue to use or attempt to charge damaged batteries (e.g.
batteries with cracks, broken parts, bent or pushed-in / pulled-out
contacts).
▶ If the battery is too hot to touch it may be defective. In this case,
place the power tool in a non-flammable location, well away from
flammable materials, where it can be kept under observation and
allowed to cool down. Contact Hilti Service after the battery has
cooled down.
Electrical safety
▶ Before beginning work, check the working area (e.g. using a metal
detector) to ensure that no concealed electric cables or gas and
water pipes are present. External metal parts of the power tool may
become live, for example, when an electric cable is damaged accidentally.
This presents a serious risk of electric shock.
3 Description
3.1 Overview of the product 1
@ Chuck (keyless chuck)
; Torque setting ring
= Function setting ring
(screwdriving/drilling/hammer
drilling)
% Gear selector switch
& Forward/reverse selector
switch with safety lock
(
)
+
§
/
:
Grip
LED light
Belt hook (optional)
Battery charge status display
Battery release button
Control switch (with electronic
speed control)
3.2 Intended use
The product described is a hand-held, cordless hammer drill/driver for driving
and removing screws, drilling in steel, wood and plastic and for hammer
drilling in masonry.
Hilti products are designed for professional use and may be operated, serviced and maintained only by trained, authorized personnel. This personnel
must be informed of any particular hazards that may be encountered. The
hammer drill/driver and its ancillary equipment may present hazards when
used incorrectly by untrained personnel or when used not as directed.
▶ Do not use the battery as a power source for other unspecified appliances.
▶ Observe the national health and safety requirements.
▶ To reduce the risk of injury, use only genuine Hilti tools and accessories.
7
Printed: 16.10.2015 | Doc-Nr: PUB / 5251748 / 000 / 00
▶ To power the hammer drill/driver, use a rechargeable battery of a type
approved by Hilti and a charger from the C4/12 series.
Note
Make sure that the outer surfaces of the battery are clean and dry
before inserting the battery in an approved battery charger.
Read the operating instructions for the charger for further information
about the charging procedure.
3.3 Charge status display
The charge status of the Li­ion battery is displayed after pressing the release
button.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks.
Meaning
• Charge status: 75 % to 100 %
• Charge status: 50 % to 75 %
• Charge status: 25 % to 50 %
• Charge status: 10 % to 25 %
• Charge status: < 10 %
Note
Battery charge status cannot be displayed while the control switch is
pressed.
3.4 Overload and overheating protection
The power tool is equipped with an electronic system to protect against
overloading and overheating. The power tool switches itself off automatically
in the event of overloading or overheating. After releasing the control switch,
the power tool may not restart immediately when the switch is pressed again
(while the power tool is cooling down).
Note
Overloading or overheating are not indicated by the charge status
display.
3.5 Items supplied
Hammer drill/driver, operating instructions.
Note
To help ensure safe and reliable operation, use only genuine Hilti spare
parts and consumables. Spare parts, consumables and accessories
approved by us for use with the product can be found at your local Hilti
Center or online at: www.hilti.com
8
Printed: 16.10.2015 | Doc-Nr: PUB / 5251748 / 000 / 00
4 Technical data
4.1 Hammer drill/driver
Rated voltage
Weight in accordance with EPTA
procedure 01/2003
Speed
1st gear
2nd gear
Torque (soft joint)
Torque range (15 settings)
Keyless chuck clamping range
Ø drill bit (softwood)
Ø drill bit (hardwood)
Ø drill bit (metal)
10.8 V
1.2 kg
0 rpm … 400 rpm
0 rpm … 1,500 rpm
≤ 12 Nm
0.5 Nm … 3.5 Nm
0.8 mm … 10 mm
0.8 mm … 14 mm
0.8 mm … 10 mm
0.8 mm … 6 mm
4.2 Noise information and vibration values determined in accordance
with EN 60745
The sound pressure and vibration values given in these instructions have
been measured in accordance with a standardized test and may be used to
compare one electric tool with another. They may be used for a preliminary
assessment of exposure.
The data given represents the main applications of the electric tool. However,
if the electric tool is used for different applications, with different accessory
tools, or is poorly maintained, the data may vary. This may significantly
increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times
when the power tool is switched off, or when it is running but not actually
being used for a job. This may significantly reduce exposure over the total
working period.
Identify additional safety measures to protect the operator from the effects
of noise and/or vibration, for example: maintaining the power tool and
accessory tools, keeping the hands warm, organization of work patterns.
Noise emission values determined in accordance with EN 60745
SF 2H­A
85 dB(A)
Emission sound pressure level (LpA)
Uncertainty for the sound pressure level (KpA) 3 dB(A)
96 dB(A)
Sound (power) level (LWA)
3 dB(A)
Uncertainty for the sound power level (KWA)
9
Printed: 16.10.2015 | Doc-Nr: PUB / 5251748 / 000 / 00
Total vibration (vector sum of three directions), measured in accordance with EN 60745
SF 2H­A
0.5 m/s²
Vibration emission value for screwdriving (ah)
1.5 m/s²
Uncertainty for screwdriving (K)
0.5 m/s²
Vibration emission value for drilling in metal (ah, D)
1.5 m/s²
Uncertainty for drilling in metal (K)
4.3 Battery
Rated voltage
Capacity
Energy capacity
Weight
B 12/2.6 Li-Ion
10.8 V
2.6 Ah
28.08 Wh
0.24 kg
5 Operation
5.1 Inserting the battery 2
CAUTION
Risk of injury. The drill/driver may start inadvertently.
▶ Before fitting the battery, check that the drill/driver is switched off
and that the switch safety lock is activated.
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶ Before inserting the battery, check to ensure that the battery terminals
and the contacts in the drill/driver are free from foreign objects.
CAUTION
Risk of injury. If the battery is not fitted correctly it may drop out and fall.
▶ Check that the battery is securely seated in the tool so that it cannot
drop out and fall, thereby presenting a hazard to other persons.
▶ Fit the battery and make sure that it is heard to engage.
5.2 Fitting the belt hook (optional) 3
WARNING
Risk of injury. A falling power tool may present a risk of injury to
yourself and others.
▶ Check that the belt hook is fitted securely before beginning work.
10
Printed: 16.10.2015 | Doc-Nr: PUB / 5251748 / 000 / 00
Note
The belt hook allows the power tool to be attached to a belt worn by
the operator. The belt hook can be fitted to allow attachment on the left
or right side of the body.
▶ Fit the belt hook.
5.3 Selecting the function 4
▶ Select the desired function.
5.4 Setting the torque 5
▶ Set the desired torque.
Note
The torque is limited only when the power tool is set to screwdriving
mode .
5.5 Selecting the gear 6
Note
The gear selector switch can be operated only when the motor is not
running.
▶ Select the gear.
5.6 Setting forward or reverse rotation 7
Note
An interlock prevents switching while the motor is running.
The control switch is locked when the forward/reverse switch is in the
middle position (safety lock).
▶ Set the forward/reverse switch to the desired direction of rotation.
5.7 Switching on
▶ Press the control switch.
◁ Speed of rotation is regulated by the distance the control switch is
pressed in.
5.8 Switching off
▶ Release the control switch.
5.9 Fitting the accessory tool
1. Set the forward/reverse switch to the middle position or remove the
battery from the power tool.
2. Open the keyless chuck.
11
Printed: 16.10.2015 | Doc-Nr: PUB / 5251748 / 000 / 00
3. Insert the accessory tool in the chuck and then turn the keyless chuck
firmly until tight.
4. Check that the accessory tool is held securely.
5.10 Removing the accessory tool
1. Set the forward/reverse switch to the middle position or remove the
battery from the power tool.
2. Open the keyless chuck.
3. Pull the accessory tool out of the chuck.
5.11 Screwdriving
1. Set the function selector ring to the “screwdriving” position .
2. Set the torque setting ring to the desired torque.
3. Set the forward/reverse switch to the desired direction of rotation.
5.12 Drilling
1. Set the function selector ring to the “drilling” position .
2. Set the forward/reverse switch to the “forward” position.
5.13 Hammer drilling
1. Set the function selector ring to the “hammer drilling” position
2. Set the forward/reverse switch to the “forward” position.
.
6 Care, maintenance, transport and storage
6.1 Care and maintenance of the tool
WARNING
Electrical hazards. Improper repairs to electrical parts may lead to
serious injuries.
▶ Electrical parts may be repaired only by trained electrical specialists.
▶ Keep the tool, especially its grip surfaces, clean and free from oil and
grease. Do not use cleaning agents containing silicone.
▶ Never operate the power tool when the ventilation slots are blocked.
Clean the air vents carefully using a dry brush. Do not permit foreign
objects to enter the interior of the tool.
▶ Clean the outer surfaces of the tool with a slightly damp cloth at regular
intervals.
6.2 Care of Li­ion batteries
▶ Keep the battery clean and free from oil and grease.
▶ Clean the outer surfaces of the tool with a slightly damp cloth at regular
intervals. Do not use cleaning agents containing silicone.
12
Printed: 16.10.2015 | Doc-Nr: PUB / 5251748 / 000 / 00
▶ To achieve maximum battery life, stop drawing power from the battery as
soon as a significant drop in the performance of the power tool is noticed.
▶ Charge the batteries using the Hilti chargers approved for use with Li-ion
batteries.
6.3 Transport and storage
WARNING
Fire hazard. Risk of short circuiting.
▶ Never store or transport Li­ion batteries in loose, bulk form.
▶ Remove the battery before transporting or storing the hammer drill/driver.
▶ Observe the nationally and internationally applicable transport regulations
when shipping batteries by road, rail, sea or air.
Note
Ideally, the battery should be stored in a fully-charged state in a dry
place that is as cool as possible. Storing the battery in places subject
to high ambient temperatures (e.g. at a window) has an adverse
effect on battery life and increases the rate of self-discharge.
If the battery no longer reaches full charge, it may have lost capacity
due to aging or overstressing. It is still possible to work with this
battery. You should, however, soon replace the battery with a new
one.
7 Troubleshooting
If the trouble you are experiencing is not listed in this table or you are unable
to remedy the problem by yourself, please contact Hilti Service.
Trouble or fault
The power tool
doesn’t run.
Possible cause
The battery is not fully
inserted.
Low battery.
The control switch
The forward/reverse
can’t be pressed, i.e. selector switch is in the
the switch is locked. middle position.
The battery runs
down more quickly
than usual.
Very low ambient temperature.
Action to be taken
▶ Push the battery in
until it engages with
an audible click.
▶ Charge the battery.
▶ Push the
forward/reverse
switch to the left or
right.
▶ Allow the battery to
warm up slowly to
room temperature.
13
Printed: 16.10.2015 | Doc-Nr: PUB / 5251748 / 000 / 00
Trouble or fault
Possible cause
Action to be taken
The battery doesn’t The retaining lugs on the ▶ Clean the retaining lug
engage with an audi- battery are dirty.
and push the battery
ble click.
in until it engages.
Contact Hilti Service if
the problem persists.
The power tool or
Electrical fault.
▶ Switch the power
the battery becomes
tool off immediately,
very warm.
remove the battery,
keep it under observation, allow it to cool
down and contact
Hilti Service.
The tool is overloaded
▶ Select a suitable
(application limits expower tool for the
ceeded).
application.
8 Disposal
WARNING
Risk of injury. Hazards presented by improper disposal.
▶ Improper disposal of the equipment may have the following consequences: The burning of plastic components generates toxic fumes
which may present a health hazard. Batteries may explode if damaged or exposed to very high temperatures, causing poisoning,
burns, acid burns or environmental pollution. Careless disposal may
permit unauthorized and improper use of the equipment. This may
result in serious personal injury, injury to third parties and pollution of
the environment.
▶ Dispose of defective batteries right away. Keep them out of reach of
children. Do not disassemble or incinerate the batteries.
▶ Batteries that have reached the end of their life must be disposed of
in accordance with national regulations or returned to Hilti.
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The materials must be correctly separated before
they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti
representative for further information.
In accordance with the European Directive on waste electrical and electronic
equipment and its implementation in conformance with national law, electric
tools or appliances that have reached the end of their life must be collected
separately and returned to an environmentally compatible recycling facility.
14
Printed: 16.10.2015 | Doc-Nr: PUB / 5251748 / 000 / 00
▶ Disposal of electric tools or appliances together with household waste
is not permissible.
9 Manufacturer’s warranty
▶ Please contact your local Hilti representative if you have questions about
the warranty conditions.
10 EC declaration of conformity
Manufacturer
Hilti Aktiengesellschaft
Feldkircherstrasse 100
9494 Schaan
Liechtenstein
We declare, on our sole responsibility, that this product complies with the
following directives and standards.
Designation
Drill/driver
Type designation
Generation
Year of design
SF 2H­A
01
2015
Applicable directives:
•
•
•
•
Applicable standards:
• EN 60745-1, EN 60745-2-1, EN 60745-2-2
• EN ISO 12100
Technical documentation
filed at:
• Electric Tools Approval Department
2014/30/EU (as of April 20, 2016)
2006/42/EC
2006/66/EC
2011/65/EU
Hilti Entwicklungsgesellschaft mbH
Hiltistraße 6
86916 Kaufering
Germany
Schaan, 09.2015
Paolo Luccini
(Head of BA Quality and Process
Management / Business Unit Electric Tools & Accessories)
Tassilo Deinzer
(Executive Vice President / Business
Unit Power Tools & Accessories)
15
Printed: 16.10.2015 | Doc-Nr: PUB / 5251748 / 000 / 00
Printed: 16.10.2015 | Doc-Nr: PUB / 5251748 / 000 / 00
2125998
*2125998*
Hilti = registered trademark of Hilti Corp., Schaan
Pos. 8 | 20150918
Download PDF

advertising