lancom wlc-4025+ - Geizhals Static Content

LANCOM WLC-4025+
Central Management for 25 (optional 100) LANCOM Access Points and WLAN Routers
1 "Smart Controller" architecture for application-based or user-based WLANs
1 Centralised Firmware deployment and management of Access Points
1 Automatic discovery, configuration and channel assignment of Access Points
1 Monitoring and ensuring the security and QoS policies
1 Scalability and cascadability through multiple controllers including redundancy
1 Unique system design which prevents "single point of failure"
1 Comprehensive support of VLAN, RADIUS and 802.1X/EAP functions
1 Full performance with 802.11n based Access Points
The LANCOM WLC-4025+ is ideally suited due to its scalability and extensibility for WLAN installations with 25 upto 100 Access Points as found in many companies and
public institutions and in universities and healthcare. The Controller ensures a simplified Installation und a secure setup and provides multiple use of the WLAN infrastructure
for different applications and usergroups.
More management.
LCMS, the LANCOM Management System, is a free software package for the Microsoft Windows operating system for the configuration, remote maintenance and real-time
monitoring of all LANCOM routers, central-site gateways, access points, WLAN controllers and managed switches. LANconfig is an application for remote configuration
via HTTP, HTTPS, TFTP or ISDN dial-up. It offers easy-to-use wizards that cater for everything from the basic setup to the configuration of VPN connections, but it can also
handle the fine-tuning of individual device parameters. A single LCMS installation can handle the monitoring and maintenance of any of the various LANCOM devices.
LANmonitor offers detailed, real-time monitoring of parameters, it provides access to log files and statistics, and it can carry out a detailed trace-protocol analysis. Along
with convenient functions such as the firewall GUI for object-orientated firewall programming, a range of professional functions help with the administration of projects,
including the automatic configuration backup, saving and uploading scripts, a folder-based organization, and a dynamic search filter. Service providers benefit from the
broad range of scripting methods and professional access with individual access rights for administrators via SSH, HTTPS, TFTP, telnet and ISDN dial-in. Rollouts and
operations are assisted by the automatic upload of configurations and firmware from USB data media and the option of storing project-specific boot configurations in
place of the standard factory settings—all of which offers big potential savings on expensive manual maintenance.
More virtualization.
Advanced Routing and Forwarding (ARF) from LANCOM is a unique technology for network virtualization. It enables different logical networks, each with their own settings
for DHCP, DNS, routing and firewall, to operate on a single device and share the same physical infrastructure. For example, networks in the LAN can be assigned to different
VLANs, tagged in the WAN or assigned to different RAS connections. The innovative Tunnel-in-Tunnel technology for VPN allows different networks between LANCOM
routers to be completely isolated even over a shared IPsec-VPN connection—even with overlapping IP-address ranges. ARF is suitable for the cross-site separation of
logical networks, for example where different applications or service providers work on shared infrastructure. Conflicts can be completely avoided. Incursions from one
logical network to another, either intentionally or by accident, are effectively prevented by ARF. In particular for companies located at multiple sites, ARF enables the switch
to a purely IP-based infrastructure, so offering considerable potential savings in operations.
Maximum simplicity.
Operation doesn't get much simpler than in Controller mode—simply "plug in" a new Access Point and the Controller takes over the setup, implementation and monitoring
of WLAN security policies. LANCOM WLAN Controllers are ideal for WLAN infrastructure for multiple user groups and applications such as for data, Voice-over-WLAN and
WLAN guest accounts. As "smart controllers" they forward the data depending on the application or even the user — by switching user data at the AP for maximum
performance, or by separating the LAN into a dedicated VLAN for WLAN guest accounts. The flexible switching options ensure that the WLAN Controller is "11n Ready"
avoiding expensive LAN infrastructure upgrades and the Controller does not end up being a central bottle-neck. Even remote sites are easily integrated into the centralized
management over an IP connection for greater convenience
Comprehensive security functions.
The WLAN Controller offers a new dimension in security: Each Access Point is uniquely identified via digital certificate and is continuously monitored. Background scanning
permanently monitors the entire frequency range. Based on this, the WLANmonitor software (included) offers rogue AP and Client detection for a complete overview of
all WLAN networks and clients within range. User authentication and access control can be implemented with RADIUS/EAP, either by using the integrated RADIUS server
or by any external RADIUS/EAP server acting as proxy for the WLAN Controller. User groups can be separated by the extensive VLAN functions supported by the WLAN
Controller. Static mapping of different SSIDs to VLANs, for separating guest accounts, voice users etc. In addition the Advanced Routing and Forwarding functions support
multiple IP and VLAN contexts and VLANs can be dynamically assigned to selected users or sites.
Highest performance—at all times.
Automatic channel selection combines optimal performance with simple operation. Applications such as Voice over WLAN are supported by fast roaming times and the
end-to-end communication of Quality-of-Service information. Yet another distinguishing factor with LANCOM WLAN Controllers is the wide range of redundancies. Not
only can multiple Controllers combine to form redundant clusters, even a single Controller—unlike many other centralized systems—works effectively to prevent the
occurrence of single points of failure. This is achieved in part by the "Smart Controller" system architecture, providing flexibility with data break-out either centrally or
decentrally depending on the user, and in part by the option of fully self-sufficient operation that can be set for each SSID. The result is a system for site-spanning WLAN
management with guaranteed security that cannot be compromised—even if the link to the Controller should fail.
Outstandingly future proof.
Smart Controller technology combined with the integrated hardware encryption accelerator make the WLAN Controller outstandingly future proof. All current LANCOM
2.4- and 5-GHz WLAN Access Points and WLAN routers can be integrated into the WLAN management system. The 802.11n based Access Point series can be managed
by the Controller without it ending up as a central bottleneck.The "split management" integration of the LANCOM WLAN routers and IADs enables company-wide WLAN
security policy to be extended all the way into home offices. LANCOM guarantees that the WLAN Controller firmware and the included management programs LANconfig,
LANmonitor and WLANmonitor will benefit from continuous future developments —software updates are included in the device's purchase price.
LANCOM WLC-4025+
Features as of: LCOS 9.10
WLAN profile settings*
Radio channels 2.4 GHz
Up to 13 channels, max. 3 non-overlapping (depending on country-specific restrictions)
Radio channels 5 GHz
Up to 26 non-overlapping channels (available channels and further obligations such as automatic DFS dynamic channel selection depending on
national regulations)
IEEE 802.11u
Managed LANCOM Access Points support the WLAN standard IEEE 802.11u (Hotspot 2.0) which allows mobile clients a seamless transition from
the cellular network into WLAN hotspots. Authentication methods using SIM card information, certificates or username and password, enable an
automatic, encrypted login to WLAN hotspots of roaming partners - without the need to manually enter login credentials
Roaming
Seamless handover between radio cells, IAPP support with optional restriction to an ARF context, IEEE 802.11d support
Opportunistic Key Caching
Opportunistic key caching allows fast roaming processes between access points. WLAN installations utilizing a WLAN controller and IEEE 802.1X
authentication cache the access keys of the clients and are transmitted by the WLAN controller to all mananged access points
Fast roaming
Based on IEEE 802.11r, allows fast roaming procedures between access points. This is possible by using IEEE 802.1X authentication or pre-shared
keys in controller based WLAN installations, which save the access keys temporarily and distribute them to the managed access points.
Concurrent WLAN clients
Depends on the access points in operation
VLAN
VLAN ID definable per interface, WLAN SSID, point-to-point connection and routing context (4094 IDs) IEEE 802.1q
Security
IEEE 802.11i / WPA2 with passphrase (WPA2-Personal) or IEEE 802.1X (WPA2-Enterprise) and hardware-accelerated AES, closed network, WEP64,
WEP128, WEP152, user authentication, IEEE 802.1x /EAP, LEPS, WPA1/TKIP
Quality of Service
Prioritization according to Wireless Multimedia Extensions (WME, subset of IEEE 802.11e)
Background scanning
Detection of rogue AP's and the channel information for all WLAN channels during normal AP operation. The Background Scan Time Interval defines
the time slots in which an AP or Router searches for a foreign WLAN network in its vicinity. The time interval can be specified in either milliseconds,
seconds, minutes, hours or days
Client detection
Rogue WLAN client detection based on probe requests
IEEE 802.11u
The WLAN standard IEEE 802.11u (Hotspot 2.0) allows for a seamless transition from the cellular network into WLAN hotspots. Authentication
methods using SIM card information, certificates or username and password, enable an automatic, encrypted login to WLAN hotspots - without
the need to manually enter login credentials.
Auto WDS*
Auto WDS allows wireless integration of access points in existing WLAN infrastructure, including managment via WLAN controller.
Space Time Block Coding (STBC)*
Coding method according to IEEE 802.11n. The Space Time Block Coding improves reception by coding the data stream in blocks.
Low Density Parity Check (LDPC)*
Low Density Parity Check (LDPC) is an error correcting method. IEEE 802.11n uses convolution coding (CC) as standard error correcting method,
the usage of the more effective Low Density Parity Check (LDPC) is optional.
*) Note
Depends on the access points in operation
LANCOM Active Radio Control
Client Steering*
WLAN clients are directed actively to the best available access point to provide the best overall load balancing and the highest possible bandwidth
for each client. Client Steering can be based on client number, frequency band, and signal strength.
Band Steering*
Steering of WLAN clients towards the 5 GHz frequency band by restricting the access to the 2.4 GHz band.
RF Optimization*
Automatic selection of optimal WLAN channels. Due to reduced channel overlaps, WLAN clients benefit from an improved data throughput. In
controller-based installations, an automatic selection of optimal channels is conducted for all managed access points.
*) Note
Depends on the access points in operation. Steering of WLAN clients is not available in US version
WLAN-Controller
Number of managed devices
Up to 25 LANCOM Access Points and WLAN routers can be centrally managed by the WLAN controller. The WLC expansion options extends support
upto 100 LANCOM Access Points and WLAN routers to be managed. Capacities can be expanded even further by cascading multiple Controllers.
Smart Controller technology
The WLAN controller can switch user data per AP Radio or per SSID in the following ways: – Direct switching to the LAN at the AP (for maximum
performance, e.g. for IEEE 802.11n-based access points) – Logical seperation of user data into VLAN's (e.g. for WLAN guest access accounts) –
Central tunneling to the Controller* (layer 3 tunneling between different IP Subnets) *from LCOS 8.5x
Auto Discovery
LANCOM access points and WLAN routers automatically discover the WLAN controller by means of DNS name or IP addresses. Even AP's at remote
sites or in home offices with no direct access to the Controller can be integrated into the central Controller
Authentication and Authorization
Access Points can be authenticated manually or automatically. Signaling of new access points by LED, e-mail message, SYSLOG and SNMP traps.
Manual authentication via LANmonitor or WEBconfig GUI tools. Semi-automatic authentication based on access-point lists in the Controller ('bulk
mode'). Fully automatic authentication with default configuration assignement (can be activated/deactivated separately, e.g. during the rollout
phase). Authenticated access points can be identified by means of digital certificates; certificate generation by integrated CA (Certificate Authority);
certificate distribution by SCEP (Simple Certificate Enrollment Protocol). Access points can be blocked by CRL (Certificate Revocation List).
Management communication protocol
CAPWAP (Control and Provisioning Protocol for Wireless Access Points)
LANCOM WLC-4025+
Features as of: LCOS 9.10
WLAN-Controller
Layer-3 Tunneling
Layer-3 Tunneling in conformity with the CAPWAP standard allows the bridging of WLANs per SSID to a separate IP subnet. Layer-2 packets are
encapsulated in Layer-3 tunnels and transported to a LANCOM WLAN controller. By doing this the access point is independent of the present
infrastructure of the network. Possible applications are roaming without changing the IP address and compounding SSIDs without using VLANs
Encryption
DTLS encryption of the control channel between WLAN controller and Access Point (256-bit AES encryption with digital certificates, incl. hardware
encryption accelerator; encryption can be disabled for diagnostic purposes).
Firmware deployment
Central Firmware deployment and management of the Access Points. Requires an external web server. Automatic Firmware update on the Access
Points is also possible. The Controller checks every day, depending on the defined policy, for the latest Firmware and compares it with the versions
in the devices. This can also be activated using Cron jobs. If there is a Firmware mismatch, then the Controller downloads the matching Firmware
from the server and updates the corresponding Access Points and Routers.
Script distribution
Enables the complete configuration of non-WLAN specific functions such as Redirects, Protocol Filter, ARF etc. Internal storage of up to three script
files (max. 64 kByte) for provisioning access points without a separate HTTP server
RF management and automatic RF
optimization
The channel deployment can be static or can be automated. Upon activation of the RF Optimization setting, the Access Points search for an optimal
channel in the 2.4 GHz band. The selected channels are sent to the Controller saves these channels on the corresponding Access Points. RF
Optmization can also be activated for individual Access Points. Transmit power setting static between 0 to -20 dB. Alarm notification in case of
Access Point failure by LED, e-mail, SYSLOG and SNMP traps.
Configuration management
Definition and grouping of all logical and physical WLAN parameters by means of WLAN configuration profiles. Fully automatic or manual profile
assignment to WLAN Access Points; automatic transfer and configuration verification (policy enforcement).
Inheritance of configuration profiles
Support of hierarchical WLAN profile groups. New profiles can be easily created by inheriting parameters from existing profiles.
Management operating modes
The AP can be set to 'managed' or 'unmanaged' mode for each radio interface. With LANCOM WLAN routers, the Controller manages the WLAN
part only (split management).
Stand alone operation
In 'Managed' mode, an adjustable setting defines the time-span for which the AP continues Stand-alone operation in the event the connection to
the Controller fails. After this time-span the AP configuration is deleted and the AP resumes operation only after the connection to the Controller
is reestablished. By default this value is set to zero and AP ceases operation as soon as connection to the Controller is lost. Alternatively, a special
time setting allows the AP to function in Stand-alone mode indefinetly. In Stand-alone mode only Pre-shared Key SSID's are functional.
VLAN and IP contexts
A fixed VLAN can be set for each SSID. The WLAN controller can independently provide up to 64 separate IP networks, and each of these can be
individually mapped to VLANs and, consequently, to SSIDs (Advanced Routing and Forwarding, ARF). The Controller can provide, among others,
individual DHCP, DNS, routing, firewall and VPN functions for these networks.
Dynamic VLAN assignment
Dynamic VLAN assignment for target user groups based on MAC addresses, BSSID or SSID by means of external RADIUS server.
RADIUS server
Integrated RADIUS server for MAC address list management. Support for RADSEC (Secure RADIUS) for secure communication with RADIUS servers.
EAP server
Integrated EAP server for authentication of IEEE 802.1X clients via EAP-TLS, EAP-TTLS, EAP-MD5, EAP-GTC, PEAP, MSCHAP or MSCHAPv2
RADIUS/EAP proxy per SSID
Proxy mode for external RADIUS/EAP servers (forwarding and realm handling) per SSID
Redundancy, Controller backup and load
balancing
Every managed LANCOM AP can be assigned to a group of alternative WLAN controllers. A suitable Controller is selected within this group depending
on AP load. This ensures that also in backup state the load of larger installations remains equally distributed.
LED control
The LEDs of administrated WLAN devices can be centrally deactivated via the WLAN controller
CA hierarchy
The Certificate Authority (CA) can be structured hierarchically when using multiple WLAN controllers. This allows access points to swap between
different WLAN controllers without certificate conflicts. The Certificate Revocation Lists (CRL) can be shared between the different devices
Load balancing
When using multiple WLAN controllers the access points are distributed evenly among the different WLAN controllers to offer the best load balancing.
In case one WLAN controller is unavailable the access points are edistributed among the remaining WLAN controllers automatically. Once it is
restored they are redistributed again.
Backup
A priority can be set for the WLAN Controller which allows operating in hot standby mode. Access points switch automatically to the WLAN controller
with the highest priority
Fast roaming
VoWLAN devices require seamless roaming for ensuring optimal speech quality. The Access Points support PMK caching and Pre-authentication
for such demanding applications. WPA2 and WPA2-PSK operate with sub-85 ms roaming times (requirements: adequate signal quality, sufficient
RF overlap, clients with a low roaming threshold).
QoS
IEEE 802.11e / WME: Automatic VLAN tagging (IEEE 802.1p) in the Access Points. Mapping to DiffServ attributes in the WLAN controller if this is
deployed as a layer-3 router
Background scanning, rogue-AP and
rogue-client detection
Background scanning does not interupt normal AP operation and collects information on the radio channel load (AP acts as a 'Probe' or 'Sensor'
by going off-channel). Foreign Access Points and clients is sent to the Rogue AP Detection in LANCOM WLANmonitor.
WLAN visualization
The management tool LANCOM WLANmonitor (included) acts as a central monitoring program for the WLAN controller and visualizes the performance
of all WLAN controllers, Access Points, SSIDs and clients.
WLAN guess access accounts
Static mapping of guest SSIDs in VLANs, access limitations and VLAN routing by means of ARF (Advanced Routing and Forwarding).
LANCOM WLC-4025+
Features as of: LCOS 9.10
WLAN-Controller
Public Spot function
Optional functionality (see at available options). Easy set-up of guest accounts with just a few mouse clicks using the Voucher-Wizard. The vouchers
can be printed over any standard Printer on the network. The Voucher-Wizard can be customized by uploading an individual logo. Function works
without external RADIUS and Accounting Servers. Configuration of time and/or traffic budgets as well as when accounting should start. Support
of public certificates and certificate chains from trust centers for Public Spots. This allows popular browsers to access trustworthy login pages with
secure access (HTTPS) without warnings
WLAN client limiting
To ensure that load is evenly balanced between multiple Access Points, each one can be set with a maximum number of allowable WLAN clients.
Automatic configuration alignment (Config
Sync)*
Due to the grouping of several individual devices to one device group (cluster), configuration changes conducted for one device can be automatically
synchronized with all cluster devices, without having to manage each device manually (Config Sync).
Management software
Included: - LANCOM LANconfig - LANCOM LANmonitor - LANCOM WLANmonitor
*)
Only with WLC Clustering XL Option
Supported Access Points and WLAN routers
Indoor
1 LANCOM L-151gn Wireless, LANCOM L-151E Wireless, LANCOM L-54g Wireless, LANCOM L-54ag Wireless, LANCOM L-54 dual Wireless
1 LANCOM L-305agn Wireless, LANCOM L-310agn Wireless, LANCOM L-315agn dual Wireless
1 LANCOM L-320agn Wireless, LANCOM L-320agn Wireless (white), LANCOM L-321agn Wireless, LANCOM L-322agn dual Wireless, LANCOM
L-322E Wireless, LANCOM L-330agn dual Wireless
1 LANCOM L-451agn Wireless, LANCOM L-452agn dual Wireless, LANCOM L-460agn dual Wireless
1 LANCOM L-1302acn dual Wireless, LANCOM L-1310acn dual Wireless
Outdoor
1 LANCOM OAP-54 Wireless, LANCOM OAP-54-1 Wireless
1 LANCOM OAP-310 Wireless
1 LANCOM OAP-321, LANCOM OAP-321-3G
1 LANCOM OAP-382, LANCOM OAP-322
Industrial
1 LANCOM IAP-54 Wireless
1 LANCOM XAP-40-2 Wireless
1 LANCOM IAP-321, LANCOM IAP-321-3G, LANCOM IAP-322
UMTS/HSPDA
1 LANCOM 1780EW-4G, LANCOM 1780EW-3G
1 LANCOM 3850 Wireless
WLAN-Router and IADs
1 LANCOM 1781VAW, LANCOM 1781AW, LANCOM 1781EW(+)
1 LANCOM 1811n Wireless, LANCOM 1821n Wireless, LANCOM 1823 VoIP, LANCOM 1821+ Wireless ADSL
Functions in layer-3 routing mode
Note:
Some of the below functions are only active when the device is operating as a router, firewall or VPN gateway.
Firewall
Stateful inspection firewall
Incoming/Outgoing Traffic inspection based on connection information. Trigger for firewall rules depending on backup status, e.g. simplified rule
sets for low-bandwidth backup lines. Limitation of the number of sessions per remote site (ID)
Packet filter
Check based on the header information of an IP packet (IP or MAC source/destination addresses; source/destination ports, DiffServ attribute);
remote-site dependant, direction dependant, bandwidth dependant
Extended port forwarding
Network Address Translation (NAT) based on protocol and WAN address, i.e. to make internal webservers accessible from WAN
N:N IP address mapping
N:N IP address mapping for translation of IP addresses or entire networks
Tagging
The firewall marks packets with routing tags, e.g. for policy-based routing; Source routing tags for the creation of independent firewall rules for
different ARF contexts
Actions
Forward, drop, reject, block sender address, close destination port, disconnect
Notification
Via e-mail, SYSLOG or SNMP trap
LANCOM WLC-4025+
Features as of: LCOS 9.10
Quality of Service
Traffic shaping
Dynamic bandwidth management with IP traffic shaping
Bandwidth reservation
Dynamic reservation of minimum and maximum bandwidths, totally or connection based, separate settings for send and receive directions. Setting
relative bandwidth limits for QoS in percent
DiffServ/TOS
Priority queuing of packets based on DiffServ/TOS fields
Packet-size control
Automatic packet-size control by fragmentation or Path Maximum Transmission Unit (PMTU) adjustment
Layer 2/Layer 3 tagging
Automatic or fixed translation of layer-2 priority information (IEEE 802.11p-marked Ethernet frames) to layer-3 DiffServ attributes in routing mode.
Translation from layer 3 to layer 2 with automatic recognition of IEEE 802.11p-support in the destination device
Security
Intrusion Prevention
Monitoring and blocking of login attempts and port scans
IP spoofing
Source IP address check on all interfaces: only IP addresses belonging to the defined IP networks are allowed
Access control lists
Filtering of IP or MAC addresses and preset protocols for configuration access
Denial of Service protection
Protection from fragmentation errors and SYN flooding
General
Detailed settings for handling reassembly, PING, stealth mode and AUTH port
URL blocker
Filtering of unwanted URLs based on DNS hitlists and wildcard filters. Extended functionality with Content Filter Option
Password protection
Password-protected configuration access can be set for each interface
Alerts
Alerts via e-mail, SNMP traps and SYSLOG
Authentication mechanisms
EAP-TLS, EAP-TTLS, PEAP, MS-CHAP, MS-CHAPv2 as EAP authentication mechanisms, PAP, CHAP, MS-CHAP and MS-CHAPv2 as PPP authentication
mechanisms
Adjustable reset button
Adjustable reset button for 'ignore', 'boot-only' and 'reset-or-boot'
High availability / redundancy
VRRP
VRRP (Virtual Router Redundancy Protocol) for backup in case of failure of a device or remote station. Enables passive standby groups or reciprocal
backup between multiple active devices including load balancing and user definable backup priorities
FirmSafe
For completely safe software upgrades thanks to two stored firmware versions, incl. test mode for firmware updates
Load balancing
Static and dynamic load balancing over up to 4 WAN connections (incl. client binding). Channel bundling with Multilink PPP (if supported by
network operator)
VPN redundancy
Backup of VPN connections across different hierarchy levels, e.g. in case of failure of a central VPN concentrator and re-routing to multiple distributed
remote sites. Any number of VPN remote sites can be defined (the tunnel limit applies only to active connections). Up to 32 alternative remote
stations, each with its own routing tag, can be defined per VPN connection. Automatic selection may be sequential, or dependant on the last
connection, or random (VPN load balancing)
Line monitoring
Line monitoring with LCP echo monitoring, dead-peer detection and up to 4 addresses for end-to-end monitoring with ICMP polling
VPN
IPSec over HTTPS
Enables IPsec VPN based on TCP (at port 443 like HTTPS) which can go through firewalls in networks where e. g. port 500 for IKE is blocked. Suitable
for client-to-site connections (with LANCOM Advanced VPN Client 2.22 or later) and site-to-site connections (LANCOM VPN gateways or routers
with LCOS 8.0 or later). IPSec over HTTPS is based on the NCP VPN Path Finder technology
Number of VPN tunnels
Max. number of concurrent active IPSec, PPTP (MPPE) and L2TPv2 tunnels: 5. Unlimited configurable connections.
Hardware accelerator
Integrated hardware accelerator for 3DES/AES encryption and decryption
Realtime clock
Integrated, buffered realtime clock to save the date and time during power failure. Assures timely validation of certificates in any case
Random number generator
Generates real random numbers in hardware, e. g. for improved key generation for certificates immediately after switching-on
1-Click-VPN Site-to-Site
Creation of VPN connections between LANCOM routers via drag and drop in LANconfig
IKE
IPSec key exchange with Preshared Key or certificate
Smart Certificate
Convenient generation of digital X.509 certificates via an own certifaction authority (SCEP-CA) on the webpage or via SCEP.
Certificates
X.509 digital multi-level certificate support, compatible with Microsoft Server / Enterprise Server and OpenSSL, upload of PKCS#12 files via HTTPS
interface and LANconfig. Simultaneous support of multiple certification authorities with the management of up to nine parallel certificate hierarchies
as containers (VPN-1 to VPN-9). Simplified addressing of individual certificates by the hierarchy's container name (VPN-1 to VPN-9). Wildcards for
certificate checks of parts of the identity in the subject. Secure Key Storage protects a private key (PKCS#12) from theft
Certificate rollout
Automatic creation, rollout and renewal of certificates via SCEP (Simple Certificate Enrollment Protocol) per certificate hierarchy
LANCOM WLC-4025+
Features as of: LCOS 9.10
VPN
Certificate revocation lists (CRL)
CRL retrieval via HTTP per certificate hierarchy
OCSP Client
Check X.509 certifications by using OCSP (Online Certificate Status Protocol) in real time as an alternative to CRLs
XAUTH
XAUTH client for registering LANCOM routers and access points at XAUTH servers incl. IKE-config mode. XAUTH server enables clients to register
via XAUTH at LANCOM routers. Connection of the XAUTH server to RADIUS servers provides the central authentication of VPN-access with user
name and password. Authentication of VPN-client access via XAUTH and RADIUS connection additionally by OTP token
Proadaptive VPN
Automated configuration and dynamic creation of all necessary VPN and routing entries based on a default entry for site-to-site connections.
Propagation of dynamically learned routes via RIPv2 if required
Algorithms
3DES (168 bit), AES (128, 192 or 256 bit), Blowfish (128 bit), RSA (1024-4096 bit) and CAST (128 bit). OpenSSL implementation with FIPS-140
certified algorithms. MD-5, SHA-1 or SHA-256 hashes
NAT-Traversal
NAT-Traversal (NAT-T) support for VPN over routes without VPN passthrough
IPCOMP
VPN data compression based on Deflate compression for higher IPSec throughput on low-bandwidth connections (must be supported by remote
endpoint)
Dynamic DNS
Enables the registration of IP addresses with a Dynamic DNS provider in the case that fixed IP addresses are not used for the VPN connection
Specific DNS forwarding
DNS forwarding according to DNS domain, e.g. internal names are translated by proprietary DNS servers in the VPN. External names are translated
by Internet DNS servers
IPv4 VPN over IPv6 WAN
Enables the use of IPv4 VPN over IPv6 WAN connections
VPN throughput (max., AES)
1416-byte frame size UDP
337 Mbps
256-byte frame size UDP
67 Mbps
Firewall throughput (max.)
1518-byte frame size UDP
643 Mbps
256-byte frame size UDP
112 Mbps
Content Filter (optional)
Demo version
Activate the 30-day trial version after free registration under http://www.lancom.eu/routeroptions
URL filter database/rating server*
Worldwide, redundant rating servers from IBM Security Solutions for querying URL classifications. Database with over 100 million entries covering
about 10 billion web pages. Web crawlers automatically search and classify web sites to provide nearly 150,000 updates per day: They use text
classification by optical character recognition, key word searches, classification by word frequency and combinations, web-site comparison of text,
images and page elements, object recognition of special characters, symbols, trademarks and prohibited images, recognition of pornography and
nudity by analyzing the concentration of skin tones in images, by structure and link analysis, by malware detection in binary files and installation
packages
URL check*
Database based online check of web sites (HTTP/HTTPS). HTTPS websites are checked based on DNS names of HTTPS server certificates or based
on “Reverse DNS lookup“ of IP addresses.
Categories/category profiles*
Filter rules can be defined in each profile by collecting category profiles from 58 categories, for example to restrict Internet access to business
purposes only (limiting private use) or by providing protection from content that is harmful to minors or hazardous content (e.g. malware sites).
Clearly structured selection due to the grouping of similar categories. Content for each category can be allowed, blocked, or released by override
Override**
Each category can be given an optional manual override that allows the user to access blocked content on a case-by-case basis. The override
operates for a limited time period by allowing the category or domain, or a combination of both. Optional notification of the administrator in case
of overrides
Black-/whitelist
Lists that are manually configured to explicitly allow (whitelist) or block (blacklist) web sites for each profile, independent of the rating server.
Wildcards can be used when defining groups of pages or for filtering sub pages
Profiles
Timeframes, blacklists, whitelists and categories are collected into profiles that can be activated separately for content-filter actions. A default
profile with standard settings blocks racist, pornographic, criminal, and extremist content as well as anonymous proxies, weapons/military, drugs,
SPAM and malware
Time frames
Timeframes can be flexibly defined for control over filtering depending on the time of day or weekday, e.g. to relax controls during break times for
private surfing
Flexible firewall action
Activation of the content filter by selecting the required firewall profile that contains content-filter actions. Firewall rules enable the flexible use of
your own profiles for different clients, networks or connections to certain servers
Individual display pages (for blocked, error,
override)
Response pages displayed by the content filter in case of blocked sites, errors or overrides can be custom designed. Variables enable the inclusion
of current information such as the category, URL, and rating-server categorization. Response pages can be issued in any language depending on
the language set in the user's web browser
LANCOM WLC-4025+
Features as of: LCOS 9.10
Content Filter (optional)
Redirection to external pages
As an alternative to displaying the device's own internal response pages to blockings, errors or overrides, you can redirect to external web servers
License management
Automatic notification of license expiry by e-mail, LANmonitor, SYSLOG or SNMP trap. Activation of license renewal at any time before expiry of
the current license (the new licensing period starts immediately after expiry of the current license)
Statistics
Display of the number of checked and blocked web pages by category in LANmonitor. Logging of all content-filter events in LANmonitor; log file
created daily, weekly or monthly. Hit list of the most frequently called pages and rating results. Analysis of the connection properties; minimum,
maximum and average rating-server response time
Notifications
Messaging in case of content-filter events optionally by e-mail, SNMP, SYSLOG or LANmonitor
Wizard for typical configurations
Wizard sets up the content filters for a range of typical scenarios in a few simple steps, including the creation of the necessary firewall rules with
the corresponding action
Max. users
Simultaneous checking of HTTP(S) traffic for a maximum of 400 different IP addresses in the LAN
*) Note
Categorization is maintained by IBM. Neither IBM or LANCOM can guarantee full accuracy of the categorization.
**) Note
The Override function is only available for HTTP websites.
SIP ALG
The SIP ALG (Application Layer Gateway) acts as a proxy for SIP communication. For SIP calls the ALG opens the necessary ports on the firewall for
the corresponding media packets. By using automatic address translation for devices inside the LAN, the use of STUN is no longer needed.
Routing functions
Router
IP and NetBIOS/IP multi-protocol router
Advanced Routing and Forwarding
Separate processing of 16 contexts due to virtualization of the routers. Mapping to VLANs and complete independent management and configuration
of IP networks in the device, i.e. individual settings for DHCP, DNS, Firewalling, QoS, VLAN, Routing etc. Automatic learning of routing tags for
ARF contexts from the routing table
HTTP
HTTP and HTTPS server for configuration by web interface
DNS
DNS client, DNS server, DNS relay, DNS proxy and dynamic DNS client
DHCP
DHCP client, DHCP relay and DHCP server with autodetection. Cluster of several LANCOM DHCP servers per context (ARF network) enables caching
of all DNS assignments at each router. DHCP forwarding to multiple (redundant) DHCP servers
NetBIOS
NetBIOS/IP proxy
NTP
NTP client and SNTP server, automatic adjustment for daylight-saving time
Policy-based routing
Policy-based routing based on routing tags. Based on firewall rules, certain data types are marked for specific routing, e.g. to particular remote
sites or lines
Dynamic routing
Dynamic routing with RIPv2. Learning and propagating routes; separate settings for LAN and WAN. Extended RIPv2 including HopCount, Output
Delay, Poisoned Reverse, Triggered Update for LAN (acc. to RFC 2453) and WAN (acc. to RFC 2091) as well as filter options for propagation of
routes. Definition of RIP sources with wildcards
DHCPv6
DHCPv6 client, DHCPv6 server, DHCPv6 relay, stateless- and stateful mode, IPv6 address (IA_NA), prefix delegation (IA_PD), DHCPv6 reconfigure
(server and client)
Layer 2 functions
ARP lookup
Packets sent in response to LCOS service requests (e.g. for Telnet, SSH, SNTP, SMTP, HTTP(S), SNMP, etc.) via Ethernet can be routed directly to the
requesting station (default) or to a target determined by ARP lookup
LLDP
Automatic discovery of network topology in layer 2 networks (Link Layer Discover Protocol)
DHCP option 82
DHCP relay agent information (option 82) can be insterted on devices with WLAN bridge (RFC 3046)
IPv6 layer 2 protocol filter
Router advertisement snopping blocks illegal IPv6 router advertisements in the WLAN bridge. DHCPv6 snopping blocks all illegal DHCPv6 servers.
The lightweight DHCPv6 relay agent (LDRA) can insert relay agent information on layer 2.
COM port server
COM port forwarding
COM-port server for the DIN interface. For a serial device connected to it, the server manages its own virtual COM port via Telnet (RFC 2217) for
remote maintenance (works with popular virtual COM-port drivers compliant with RFC 2217). Switchable newline conversion and alternative binary
mode. TCP keepalive according to RFC 1122 with configurable keepalive interval, retransmission timeout and retries
LAN protocols
IP
ARP, proxy ARP, BOOTP, DHCP, DNS, HTTP, HTTPS, IP, ICMP, NTP/SNTP, NetBIOS, PPPoE (server), RADIUS, RIP-1, RIP-2, RTP, SIP, SNMP, TCP, TFTP,
UDP, VRRP, VLAN
IPv6
NDP, stateless address autoconfiguration (SLAAC), stateful address autoconfiguration (with DHCPv6), router advertisements, ICMPv6, DHCPv6,
DNS, HTTP, HTTPS, PPPoE, RADIUS, TCP, UDP, SMTP
LANCOM WLC-4025+
Features as of: LCOS 9.10
IPv6
Dual Stack
IPv4/IPv6 dual stack
IPv6 compatible LCOS applications
WEBconfig, HTTP, HTTPS, SSH, Telnet, DNS, TFTP, Firewall, RAS dial-in
WAN protocols
Ethernet
PPPoE, Multi-PPPoE, ML-PPP,GRE, EoGRE,PPTP (PAC or PNS), L2TPv2 (LAC or LNS) and IPoE (with or without DHCP), RIP-1, RIP-2, VLAN, IP
IPv6
IPv6 over PPP (IPv6 and IPv4/IPv6 dual stack session), IPoE (autoconfiguration, DHCPv6 or static)
Tunneling protocols (IPv4/IPv6)
6to4, 6in4, 6rd (static and via DHCP), Dual Stack Lite (IPv4 in IPv6 tunnel)
WAN operating mode
xDSL (ext. modem)
VDSL, ADSL1, ADSL2 or ADSL2+ with external ADSL2+ modem
Interfaces
Ethernet ports
4 individual 10/100/1000 Mbps Ethernet ports. Ethernet ports can be electrically disabled within LCOS configuration
Port configuration
Each Ethernet port can be freely configured (LAN, DMZ, WAN, monitor port, off). Additionally, external DSL modems or termination routers can be
operated as a WAN port with load balancing and policy-based routing.
USB 2.0 host port
USB 2.0 hi-speed host port for connecting USB printers (USB print server), serial devices (COM port server), USB data storage (FAT file system);
bi-directional data exchange is possible
Serial interface
Serial configuration interface / COM port (8 pin Mini-DIN): 9,600 - 115,000 baud, suitable for optional connection of analog/GPRS modems. Supports
internal COM port server and allows for transparent asynchronous transmission of serial data via TCP
LCMS (LANCOM Management System)
LANconfig
Configuration program for Microsoft Windows, incl. convenient Setup Wizards. Optional group configuration, simultaneous remote configuration
and management of multiple devices over IP connection (HTTPS, HTTP, SSH, TFTP). A tree view of the setting pages like in WEBconfig provides
quick access to all settings in the configuration window. Password fields which optionally display the password in plain text and can generate
complex passwords. Configuration program properties per project or user. Automatic storage of the current configuration before firmware updates.
Exchange of configuration files between similar devices, e.g. for migrating existing configurations to new LANCOM products. Detection and display
of the LANCOM managed switches. Extensive application help for LANconfig and parameter help for device configuration. LANCOM QuickFinder
as search filter within LANconfig and device configurations that reduces the view to devices with matching properties. Central configuration of
each management port. Configuration files can also be encrypted and securly saved.
LANmonitor
Monitoring application for Microsoft Windows for (remote) surveillance and logging of the status of LANCOM devices and connections, incl. PING
diagnosis and TRACE with filters and save to file. Search function within TRACE tasks. Wizards for standard diagnostics. Export of diagnostic files
for support purposes (including bootlog, sysinfo and device configuration without passwords). Graphic display of key values (marked with an icon
in LANmonitor view) over time as well as table for minimum, maximum and average in a separate window, e. g. for Rx, Tx, CPU load, free memory.
Monitoring of the LANCOM managed switches. Flick easily through different search results by LANCOM QuickFinder
WLANmonitor
Monitoring application for Microsoft Windows for the visualization and monitoring of LANCOM WLAN installations, incl. Rogue AP and Rogue
Client visualization. LANCOM QuickFinder as search filter that reduces the view to devices with matching properties
Firewall GUI
Graphical user interface for configuring the object-oriented firewall in LANconfig: Tabular presentation with symbols for rapid understanding of
objects, choice of symbols for objects, objects for actions/Quality of Service/remote sites/services, default objects for common scenarios, individual
object definition (e.g. for user groups)
Automatic software update
Voluntary automatic updates for LCMS. Search online for LCOS updates for devices managed by LANconfig on the myLANCOM download server
(myLANCOM account mandatory). Updates can be applied directly after the download or at a later time
Management
WEBconfig
Integrated web server for the configuration of LANCOM devices via Internet browsers with HTTPS or HTTP. Similar to LANconfig with a system
overview, SYSLOG and events display, symbols in the menu tree, quick access with side tabs. WEBconfig also features Wizards for basic configuration,
security, Internet access, LAN-LAN coupling. Online help for parameters in LCOS menu tree
LANCOM Layer 2 Management (emergency
management)
The LANCOM Layer 2 Management protocol (LL2M) enables an encrypted access between the command line interfaces of two LANCOM device
directly via a Layer 2 connection
Alternative boot configuration
During rollout devices can be preset with project- or customer-specific settings. Up to two boot- and reset-persistent memory spaces can store
customized configurations for customer-specific standard settings (memory space '1') or as a rollout configuration (memory space '2'). A further
option is the storage of a persistent standard certificate for the authentication of connections during rollouts
Automatic update from USB
Automtatic upload of appropriate firmware and configuration files on insertion of USB memory (FAT filesystem) into USB interfaces of LANCOM
routers with factory settings. The function can be activated to be used during operation of configured devices. The router checks the files’ dates
and versions against the current firmware before upload
Device SYSLOG
SYSLOG buffer in the RAM (size depending on device memory) to store events for diagnosis. Default set of rules for the event protocol in SYSLOG.
The rules can be modified by the administrator. Display and saving of internal SYSLOG buffer (events) from LANCOM devices with LANmonitor,
display only with WEBconfig
LANCOM WLC-4025+
Features as of: LCOS 9.10
Management
Access rights
Individual access and function rights for up to 16 administrators. Alternative access control on a per parameter basis with TACACS+
Remote maintenance
Remote configuration with Telnet/SSL, SSH (with password or public key), browser (HTTP/HTTPS), TFTP or SNMP, firmware upload via HTTP/HTTPS
or TFTP
TACACS+
Support of TACACS+ protocol for authentication, authorization and accounting (AAA) with reliable connections and encrypted payload. Authentication
and authorization are separated completely. LANCOM access rights are converted to TACACS+ levels. With TACACS+ access can be granted per
parameter, path, command or functionality for LANconfig, WEBconfig or Telnet/SSH. Each access and all changes of configuration are logged.
Access verification and logging of SNMP Get and Set requests. WEBconfig supports the access rights of TACACS+ and choice of TACACS+ server
at login. LANconfig provides a device login with the TACACS+ request conveyed by the addressed device. Authorization to execute scripts and each
command within them by checking the TACACS+ server’s database. CRON, action-table and script processing can be diverted to avoid TACACS+
to relieve TACACS+ servers. Redundancy by setting several alternative TACACS+ servers. Configurable option to fall back to local user accounts in
case of connection drops to the TACACS+ servers. Compatibility mode to support several free TACACS+ implementations
RADIUS
Support of RADIUS protocol for authentication of configuration access. Administrative privileges can be assigned for each administrator.
Remote maintenance of 3rd party devices
A remote configuration for devices behind der LANCOM can be accomplished (after authentication) via tunneling of arbitrary TCP-based protocols,
e.g. for HTTP(S) remote maintenance of VoIP phones or printers of the LAN. Additionally, SSH and Telnet client allow to access other devices from
a LANCOM device with an interface to the target subnet if the LANCOM device can be reached at its command line interface
TFTP & HTTP(S) client
For downloading firmware and configuration files from a TFTP, HTTP or HTTPS server with variable file names (wildcards for name, MAC/IP address,
serial number), e.g. for roll-out management. Commands for live Telnet session, scripts or CRON jobs. HTTPS Client authentication possible by
username and password or by certificate
SSH & Telnet client
SSH-client function compatible to Open SSH under Linux and Unix operating systems for accessing third-party components from a LANCOM router.
Also usable when working with SSH to login to the LANCOM device. Support for certificate- and password-based authentication. Generates its own
key with sshkeygen. SSH client functions are restricted to administrators with appropriate rights. Telnet client function to login/administer third
party devices or other LANCOM devices from command line interface
Basic HTTP(S) file server
HTML pages, images and templates for Public Spot pages, vouchers, information pages of the Content Filter can be stored on a USB memory (FAT
file system) in a specific folder as an alternative for the limited internal memory
HTTPS Server
Option to choose if an uploaded certificate or the default certificate is used by the HTTPS server
Scripting
Scripting function for batch-programming of all command-line parameters and for transferring (partial) configurations, irrespective of software
versions and device types, incl. test mode for parameter changes. Utilization of timed control (CRON) or connection establishment and termination
to run scripts for automation. Scripts can send e-mails with various command line outputs as attachments
Load commands
LoadFirmware, LoadConfig and LoadScript can be executed conditionally in case certain requirements are met. For example, the command
LoadFirmware could be executed on a daily basis and check each time if the current firmware is up to date or if a new version is available. In
addition, LoadFile allows the upload of files including certificates and secured PKCS#12 containers
SNMP
SNMP management via SNMPv2, private MIB exportable by WEBconfig, MIB II
Timed control
Scheduled control of parameters and actions with CRON service
Diagnosis
Extensive LOG and TRACE options, PING and TRACEROUTE for checking connections, LANmonitor status display, internal logging buffer for SYSLOG
and firewall events, monitor mode for Ethernet ports
Statistics
Statistics
Extensive Ethernet, IP and DNS statistics; SYSLOG error counter
Accounting
Connection time, online time, transfer volumes per station. Snapshot function for regular read-out of values at the end of a billing period. Timed
(CRON) command to reset all counters at once
Export
Accounting information exportable via LANmonitor and SYSLOG
Hardware
Power supply
Internal power supply unit (110–230 V, 50-60 Hz)
Environment
Temperature range 5–40° C; humidity 0–95%; non-condensing
Housing
Robust metal housing, 19' 1 HU, 435 x 45 x 207 mm, with removable mounting brackets, network connectors on the front
Fans
1
Power consumption (max)
30 Watts
Declarations of conformity*
CE
EN 60950-1, EN 55022, EN 55024
FCC
FCC Part 15, Class B with FTP cabling
Draeger validation
Approved compatibility for use in Infinity OneNet installations with Dräger patient monitors in medical environments.
LANCOM WLC-4025+
Features as of: LCOS 9.10
Declarations of conformity*
IPv6
IPv6 Ready Gold
*) Note
You will find all declarations of conformity in the products section of our website at www.lancom-systems.de/en
Scope of delivery
CD/DVD
Data medium with management software (LANconfig, LANmonitor, WLANmonitor, LANCAPI) and documentation
Cable
Serial configuration cable, 1.5m
Cable
1 Ethernet cable, 3 m
Cable
IEC power cord
Warranty
3 years support via hotline and Internet KnowledgeBase
Software updates
Regular free updates (LCOS operating system and LANCOM Management System) via Internet
Options
LANCOM Content Filter
LANCOM Content Filter +10 user, 1 year subscription
LANCOM Content Filter
LANCOM Content Filter +25 user, 1 year subscription
LANCOM Content Filter
LANCOM Content Filter +100 user, 1 year subscription
LANCOM Content Filter
LANCOM Content Filter +10 user, 3 year subscription
LANCOM Content Filter
LANCOM Content Filter +25 user, 3 year subscription
LANCOM Content Filter
LANCOM Content Filter +100 user, 3 year subscription
Warranty Extension
LANCOM Warranty Basic Option L, item no. 10712
Warranty Extension & Advanced Replacement LANCOM Warranty Advanced Option L, item no. 10717
LANCOM Public Spot XL
Hotspot option for LANCOM WLC-4100, WLC-4025(+), LANCOM 9100(+) VPN, and LANCOM 7100(+) VPN for user authentication (recommended
up to 2,500), versatile access (via voucher, e-mail, SMS), including a comfortable setup wizard, item no. 61624
LANCOM Public Spot PMS Accounting Plus
Extension of the LANCOM Public Spot (XL) Option for the connection to hotel billing systems with FIAS interface (such as Micros Fidelio) for
authentication and billing of guest accesses for 178x routers, WLCs, and current central-site gateways, item no. 61638
LANCOM WLC AP Upgrade +10
LANCOM WLC AP Upgrade +10 Option, enables your WLC to manage 10 Access Points/WLAN router in addition, item no. 61630
LANCOM WLC AP Upgrade +25
LANCOM WLC AP Upgrade +25 Option, enables your WLC to manage 25 Access Points/WLAN router in addition, item-no. 61631
Item number(s)
LANCOM WLC High Availability Clustering XL 61636
Option
LANCOM WLC-4025+ (EU)
61378
LANCOM WLC-4025+ (UK)
61379
LANCOM WLC-4025+ (US)*
61384
www.lancom.eu
LANCOM Systems GmbH I Adenauerstr. 20/B2 I 52146 Wuerselen I Germany I E-Mail info@lancom.eu I Internet www.lancom.eu
LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change
without notice. No liability for technical errors and/or omissions. 7/2015
Support