Daily cleaning
Schaerer Coffee Art
Refer to the safety instructions and to the chapter "Cleaning" inside the user manual!
Never reach into the machine or under the beverage outlets during the automatic cleaning!
The following cleaning possibilities are available:
1. Automatic rinsing
= Self starting (programmed)
2. Hot rinsing
= Press the
button once (rinse duration: ± 10 seconds)
3. Milk tube rinsing
= Press the
button twice (rinse duration: ± 10 seconds)
4. Complete cleaning
= Press the
button for 4 seconds (procedure described as follows):
1
2
3
500 ml
50 ml
•Press the
button (± 4 seconds).
cleaning program
remove container
Wait until the display shows:
Wait until the display shows:
cleaning program
insert tablet
cleaning program
cleaning agent
Display
•Pull out the grounds container
(within 5 sec.) and clean it.
•Clean the brew area with the brush.
•Re-place the grounds container.
Display
•Insert the cleaning tablet.
•Press the button.
cleaning program
selection locked
•Fill the cleaning container with
water and cleaning agent.
Display
Cleaning program is running!
(duration: ± 5 minutes).
4
5
•Press the
cleaning program
Display
Cleaning program is running!
(duration: ± 1,5 minutes).
Dosage:
Daypure:
Water (15 °C - 25 °C):
50 ml
500 ml
•Place the tubes in the container.
6
Wait until the display shows:
button.
Display
cleaning program
rinsing water
•Press the
button.
cleaning program
Display
•Rinse the cleaning container and fill
it with 500 ml of cold water.
•Place the tubes in the container.
Display
Rinsing is running!
(duration: ± 1,5 minutes).
Prosecution: see back side
7
8
9
1
2
•������������������������������
Dismantle the foamer head and
wash it under warm, running water.
•Remove residues with a brush.
Wait until the display shows:
12:00
select product
01.08.2005
•Remove the metal cover
(see picture).
Display
•Remove the cleaning container.
•Release the ���������������������
foamer head����������
from the
holder (press the button).
•Pull off the tube from the foamer
�������
head�.
10
11
12
1
1
2
•Remove the expander [ 1 ].
•Do not remove the tubes from the
squeezer valve [ 2 ].
•Wash expander under warm,
running water.
•Clean air intake on the expander
with the supplied instrument
(see picture).
•Re-insert the foamer
��������������������
head���������
and the
expander.
•Re-place the metal cover [ 1 ].
Regard that the hooks from
the metal cover are pointing
downwards!
•Remove and wash drip grid under
warm, running water.
•Clean trip tray with a damp paper
tissue.
•Re-insert drip grid.
•Clean external surfaces with a
damp paper tissue.
Do not use any abrasives!
Follow hygiene regulations according to HACCP!
Extract from HACCP:
•Never refill milk container. Always throw leftovers away.
•Always clean the milk container before filling it with fresh milk.
•Fill up with fresh milk, chilled to
3 °C - 5 °C, just before restarting the machine.
•Use pasteurized or ultra high temperature treated (UHT) milk! Do not use raw milk! The milk must be homogonised!
•For optimum hygiene use a milk cooler (optional) to maintain milk temperature.
M. Schaerer Ltd.
Gewerbstrasse 15
3302 Moosseedorf
Switzerland
Phone: +41 31 858 51 11
Fax:
+41 31 858 51 40
E-Mail: info@schaerer.com
Internet:www.schaerer.com
Quick reference card - Version 02
QRCSCA - EN - V02
Order number: 021'611
Download PDF
Similar pages