Franke Kitchen Systems: Hospital &

HOSPITAL &
MORTUARY PRODUCTS
Product Guide
INDEX
HOSPITAL PRODUCTS
1 - 18
EC Combination Bedpan & Wash-up Sink
3
EL Bedpan Sluice Sink
4
Fixing Options For EC & EL Units
5
BBR Bedpan & Bottle Rack
5
CH Slop Hopper
6
CHBC Slop Hopper Basin Combination
7
DSBC Drip Sink Basin Combination
8
LDS Drip Sink / Cleaner Sink
9
DSG Drip Sink / Cleaner Sink
10
SSW Hospital Surgeon Scrub Up Unit
11
SSF Hospital Surgeon Scrub Up Unit
12
Combi Ward Basin
12
SMS Surgeon Mini Scrub Up Unit
13
PP Plaster Of Paris Preparation
14
Fixing Options For Plaster Of Paris Sinks
14
MSS Medical Single Bowl Sink
15
MSD Medical Double Bowl Sink
15
CBDT Baby Bath (Inset Type)
16
CB Baby Bath
17
Fixing Options For Baby Baths
17
Stainless Steel Bath
18
INDEX
MORTUARY PRODUCTS
21 - 29
Model KZ Autopsy Table
21
Ventilated Disection Table with Docking Trolley
22
MTS Post Mortem Table
23
MT Post Mortem Table
23
Modular Body Racks
24
Body Trays
25
Autopsy Transport Trolleys
26 - 27
Instrument Cabinet
28
Writing Desk
28
Supplied Mortuary Projects
29
DEKO INSTRUMENT DISINFECTORS
30
DEKO 260 Washer Disinfector
30
DEKO 25 Washer Disinfector
30
GENERAL PRODUCTS
31 - 32
Z-Series Shelving
31
Fastrack Modular Shelving
32
Please Note: All dimensions are in mm.
FRANKE HOSPITAL PRODUCTS
SLOP HOPPERS, DRIP SINKS, BOTTLE RACKS, BED
PAN WASH-UPs, SURGEON SCRUB UP UNITS,
PLASTER OF PARIS SINKS, BATHS
Franke is a leading supplier of sanitaryware products to hospitals,
clinics and mortuaries, environments where hygiene is of the highest
priority.
Franke is certified to ISO9001: 2008 quality management standards.
Our designs and construction ensure that our products meet the
demands of safety, hygiene and quality.
Uncompromising when it comes to quality, innovation and design.
Hospital Products
IMAGE
TYPE / MODEL
PRODUCT CODE
EC Combination Bedpan & Wash-Up Sink
SPECIFICATION MODEL EC:
WITH FLUSH VALVE OPTION
Franke Model EC Combination Bedpan and Wash-Up Sink manufactured from
grade 304 (18/10 stainless steel 1.6mm (draining board) and 1,2mm thick
(bowls). Unit with a 150mm high integral splash back to the rear and 15mm
deep hospital bead 100mm apron to front and sides. The unit is fitted with
two pressed seamless bowls with the sluice bowl having an integral flushing
rim and a 38mm diameter inlet pipe for the flush valve. The waste outlet on
sluice bowl is a 110mm and the rinse bowl size 610x460x230mm deep with a
40mm waste discharging into sluice bowl. The underside sprayed with vermin
proof bitumastic sound deadening and has a galvanised mild steel backing
sheet. Unit supplied complete with factory fitted Cobra FM 1.00 flush valve,
35mm water supply through 50mm sleeve on unit, CP171/041 pillar mixer
with over-arm swivel spout, CP297 pillar mixer with retractable hand spray,
15mm bedpan spray nozzle, 15mm bottle spray nozzle (both nozzles activated
by two 15mm quarter turn elbow action valves).
Please refer to fixing table for fixing options (Pg5).
LEFT HAND BOWL
FITTINGS AND FIXING OPTIONAL
380
1050
150
250
1830
FRONT VIEW
LEFT HAND BOWL
685
20
WITH HIGH LEVEL CISTERN OPTION
Franke Model EC Combination Bedpan and Wash-Up Sink manufactured from
grade 304 (18/10 stainless steel 1.6mm (draining board) and 1,2mm thick
(bowls). Unit with a 150mm high integral splash back to the rear and 15mm
deep hospital bead 100mm apron to front and sides. The unit is fitted with two
pressed seamless bowls with the sluice bowl having an integral flushing rim
and a 38mm diameter inlet pipe for the flush valve. The waste outlet on sluice
bowl is a 110mm and the rinse bowl size 610x460x230mm deep with a 40mm
waste discharging into sluice bowl. The underside sprayed with vermin proof
bitumastic sound deadening and has a galvanised mild steel backing sheet.
Unit supplied complete with 11 litres stainless steel high level cistern fitted
with Supa Flush Valve and pull chain, 41mm diameter stainless steel flush pipe
and 41 chrome plated coupling which is reduced on one end to fit the 38mm
connection on the unit.
Please refer to fixing table for fixing options (Pg5).
–– Grade 304 (18/10) Stainless Steel 1.6mm gauge on drainer and 1,2mm
gauge on bowls
–– Hygienic and durable
–– Pressed seamless bowls designed for the highest level of hygiene and
durability
–– Unit is pre-plumbed at factory and can be supplied complete with fittings
–– 57 Litres pressed rinse bowl
–– Sluice bowl with built in Flush rim mechanism with 110mm outlet
–– Alternative fixing methods (Please refer to fixing table)
380
SIDE VIEW
MODEL Dimensions
b
c
d
e
f
a
a) 15mm Cold Water
b) 38mm Cold Water
c) 15mm Cold Water
d) 15mm Hot/Cold Water
e) 15mm Cold Water
f) 15mm Hot/Cold Water
TOP VIEW
LEFT HAND BOWL
3
BOWL POSITION FLUSH SYSTEM
PRODUCT CODE
EC6
1830x685 mm Left Hand
Flush Valve
2630001
EC6
1830x685 mm Right Hand
Flush Valve
2630002
EC6
1830x685 mm Right Hand
High Level Cistern
2630003
EC6
1830x685 mm Left Hand
High Level Cistern
2630004
EC7
2135x685 mm Left Hand
Flush Valve
2630005
EC7
2135x685 mm Right Hand
Flush Valve
2630005-002
EC7
2135x685 mm Right Hand
High Level Cistern 2630006-001
EC7
2135x685 mm Left Hand
High Level Cistern
2630006
EC8
2440x685 mm Left Hand
Flush Valve
2630007
EC8
2440x685 mm Right Hand
Flush Valve
2630008
EC8
2440x685 mm Right Hand
High Level Cistern
2630116
EC8
2440x685 mm Left Hand
High Level Cistern
2630117
ACCESSORIES
Optional Installation Accessories:
STAINLESS STEEL “P”TRAP
REMOVABLE GRID (image shown on following page)
on request only
2120130
Hospital Products
IMAGE
TYPE / MODEL
PRODUCT CODE
EL Bedpan Sluice Sink
SPECIFICATION MODEL EL:
WITH FLUSH VALVE OPTION
Franke Model EL Sluice Sink manufactured from grade 304 (18/10 stainless
steel 1.6mm (draining board) and 1,2mm thick (bowls). Unit with a 150mm
high integral splash back to the rear and 15mm deep hospital bead 100mm
apron to front and sides. The unit is fitted with a pressed seamless bowls
sluice bowl having an inTTTh factory fitted Cobra FMI.00 flush valve, 35mm
water supply through 50mm sleeve on unit, 15mm bedpan spray nozzle,
15mm bottle spray nozzle (both nozzles activated by two 15mm quarter turn
elbow action valves).
Please refer to fixing table for fixing options (Pg5).
LEFT HAND BOWL
FITTINGS & FIXTURES OPTIONAL
WITH HIGH LEVEL CISTERN OPTION
Franke Model EL Sluice Sink manufactured from grade 304 (18/10 stainless
steel 1.6mm (draining board) and 1,2mm thick (bowls). Unit with a 150mm
high integral splash back to the rear and 15mm deep hospital bead 100mm
apron to front and sides. The unit is fitted with a pressed seamless bowls
sluice bowl having an integral flushing rim and a 38mm diameter inlet pipe for
the flush valve and the waste outlet is 110mm. The underside sprayed with
vermin proof bitumastic sound deadening and has a galvanised mild steel
backing sheet. Unit supplied complete with 11 litres stainless steel high level
cistern fitted with Supa Flush Valve and pull chain, 41mm diameter stainless
steel flush pipe and 41mm chrome plated coupling which is reduced on one
end to fit the 38mm connection on the unit.
Please refer to fixing table for fixing options (Pg5).
–– Grade 304 (18/10) Stainless Steel 1.6mm gauge on drainer and 1,2mm
gauge on bowl
–– Hygienic and durable
–– Pressed seamless bowl designed for the highest level of hygiene and
durability
–– Unit is pre-plumbed at factory and can be supplied complete with fittings
–– Sluice bowl with built in Flush rim mechanism with 110mm outlet
–– Alternative fixing methods (Please refer to fixing table)
FRONT VIEW
LEFT HAND BOWL
MODEL Dimensions
BOWL POSITION FLUSH SYSTEM
PRODUCT CODE
EL
1130x685 mm
Left Hand
Flush Valve
2630011
EL
1130x685 mm
Right Hand
Flush Valve
2630012
EL
1130x685 mm
Right Hand
High Level Cistern
2630013
EL
1130x685 mm
Left Hand
High Level Cistern
2630014
ACCESSORIES
Optional Installation Accessories:
SIDE VIEW
STAINLESS STEEL “P”TRAP
REMOVABLE GRID
b
c
on request only
2120130
a)15 mm Cold Water
b)35mm Cold Water
c)15mm Cold Water
a
TOP VIEW
LEFT HAND BOWL
4
Hospital Products
IMAGE
TYPE / MODEL
PRODUCT CODE
BBR Bedpan & Bottle Rack
HYGIENIC AND DURABLE IN VARIOUS DIMENSIONS
SPECIFICATION MODEL BBR:
Franke model BBR Bedpan and Bottle Rack designed to hold plastic and
stainless steel bedpans and bottles, manufactured from grade 304 (18/10)
stainless steel 8mm diameter round bars and stainless steel flat bar mounting
brackets. Bottle holders to be on the front of the unit to ensure ergonomic
function. Unit complete with stainless steel drip tray which can be removed for
cleaning and the ends of the bottle rods are fitted with rubber grommets. Unit
fixed to wall with 4 off anchor bolts (bolts specified elsewhere).
BR 6
908
150
150
150
150
150
150
90.5 62,5
212,5
111
748
REMOVEABLE DRIP TRAY
FRONT VIEW
MODEL Dimensions
(Lxhxd)
no. of
bedpans
NO. OF URINAL
BOTTLES
PRODUCT CODE
BBR2 360x505x250mm
2
3
2630138
BBR4 660x350x505mm
4
5
2630139
BBR6 960x350x505mm
6
7
2630017
257
25
175
350
50 86,2
6
–– Manufactured from Grade 304 (18/10) Stainless Steel
–– Hygienic & durable
–– New ergonomic design
–– Available in three standard sizes
–– Rubber grommets fitted to ends of bottle rods to prevent scratching of
bottles
–– Removable drip tray
SIDE VIEW
Fixing Options For EC & EL Units
STAINLESS STEEL GALLOWS BRACKETS WITH FRONT LEG
Gallows Brackets with Front Legs manufactured from grade 304(18/10)
stainless steel 40x40mm x 1,2mm thick square tubing. The front leg is
detachable and is fitted with chrome plated adjustable flanged foot pieces.
*These brackets are used in areas where the floors have coved skirting.
GALLOWS BRACKET WITH REMOVABLE FRONT LEG
WALL
RECOMMENDED FIXING OPTION
METHODS
QTY REQUIRED
40 X 40MM
SQUARE
GALLOWS
BRACKET
1 pair
CANTILEVER
COVED SKIRT
FLOOR
5
STAINLESS STEEL CANTILEVER BRACKETS
Cantilever Brackets manufactured from grade 304(18/10) stainless steel
40x40mm x 1,2mm thick square tubing.
*These brackets are used in areas where the floors have coved skirting and
the design makes cleaning under the unit very easy.
CANTILEVER BRACKET
COMMENTS
PRODUCT CODE
2120035
2120036
Hospital Products
IMAGE
TYPE / MODEL
DIMENSIONS (L X D X W)
PRODUCT CODE
CH Slop Hopper
SPECIFICATION MODEL CH:
Franke model CH Slop Hopper 540x540 manufactured from grade 304
(18/10) stainless steel 1,2mm thick with a 100mm high integral splash back
to the rear and both sides. The cone must be seamless with no welding and
have an integral flushing rim with a 107mm waste outlet for pan connector,
the inlet is fitted with a 38x250mm long vertical flush pipe for a standard
flush valve. Unit fitted with a hinged bucket grid manufactured from 10mm
diameter grade 304 (18/10) stainless steel round bar complete with two
40x40mm square stainless steel wall mounting gallows brackets. Unit fixed to
wall 600mm from the top of the front apron to the finish floor level with 4 off
anchor bolts (bolts specified elsewhere).
STANDARD FLUSHING METHOD USING FLUSH VALVE METHODS:
Cobra model FM 1.000 - 35mm water supply flush valve or,
Cobra FJ 2.000 - 20mm water supply flush valve and a . . . Cobra FJT 1.2
straight flush pipe connected to CP on brass adaptor (Flush valves specified
elsewhere)
FLUSH VALVE NOT INCLUDED
476
38
ALTERNATIVE FLUSHING METHOD USING HIGH LEVEL CISTERN:
Slop Hopper can be adapted to flush using 11 litres stainless steel high level
cistern fitted with Supa Flush Valve and pull chain, 41mm diameter stainless
steel flush pipe and 41mm chrome plated coupling which is reduced on one
end to fit the 38mm connection on the unit.
90
250
150
195
340
415
9
107
CH SLOP HOPPER
540
500
540x540x415mm
CH SLOP HOPPER WITH
540x540mm
STAINLESS STEEL “P” TRAP
FRONT VIEW
38
–– Grade 304 (18/10) Stainless Steel 1.2mm gauge
–– Hygienic and durable
–– Hinged bucket grid
–– Outlet to suit standard 101mm PVC or cast iron “P” Trap
ACCESSORIES
Optional Installation Accessories:
TAP BRACKET WITH BUCKET HOOK
63
2630035
2630037
2120128
348
296
Support Bracket to fit under tap
to avoid bucket load to tap.
540
REMOVABLE GRID
2630038
TOP VIEW
SLOP HOPPER WITH STAINLESS STEEL “P” TRAP
6
Hospital Products
IMAGE
TYPE / MODEL
DIMENSIONS (L X D X W)
PRODUCT CODE
CHBC Slop Hopper Basin Combination
SPECIFICATION MODEL CHBC:
Franke model CHBC Slop Hopper Wash hand basin combo unit 962x550mm
manufacture from grade 304 (18/10) stainless steel 1,2mm thick with a
100mm high integral splash back to the rear and both sides. The cone must
be seamless with no welding and have an integral flushing rim with a 107mm
waste outlet for pan connector, the inlet is fitted with a 38x250mm long
vertical flush pipe for a standard flush valve. Unit fitted with a hinged bucket
grid manufactured from 10mm diameter grade 304 (18/10) stainless steel
round bar. Wash hand basin size 360x280x140mm deep with a 40mm waste
outlet is included on the left or right hand side (please specify). Unit complete
with two 40x40mm square stainless steel wall mounting gallows brackets.
Unit fixed to wall 850mm from the top of the front apron to the finish floor
level with 4 off anchor bolts (bolts specified elsewhere).
LEFT HAND UNIT
TAP & WASTE FITTING NOT INCLUDED
STANDARD FLUSHING METHOD USING FLUSH VALVE METHODS:
a) Cobra model FM 1.000 - 35mm water supply flush valve or,
b) Cobra FJ 2.000 - 20mm water supply flush valve and a Cobra FJT 1.2 straight flush pipe connected to CP on brass adaptor (Flush valves else
where measured)
960
705
85
50 185
280
ALTERNATIVE FLUSHING METHOD USING HIGH LEVEL CISTERN:
Slop Hopper can be adapted to flush using an 11 litres high level cistern
(Supplied as an optional extra).
107
–– Grade 304 (18/10) Stainless Steel 1.2mm gauge
–– Hygienic and durable
–– Hinged bucket grid
–– Outlet to suit standard 101mm PC or cast iron “P”-Trap
–– Pressed wash hand basin integrated into a stepped work top for maximum
hygiene.
–– 150mm splash back
–– 40mm Square tube brackets to allow for wall mounting
FRONT VIEW
LEFT HAND UNIT
255
100
960
STD Ø40mm WASTE
OUTLET
38
62
32
202
550
345
TOP VIEW
LEFT HAND UNIT
SPECIFICATION FOR 11 LITRES STAINLESS STEEL CISTERN:
Grade 304 (18/10) Stainless Steel high level cistern fitted with PVC Beta
valve and pull chain connected to slop hopper with 41mm stainless steel flush
pipe and CP on brass adaptor
CHBC SLOP HOPPER
LEFT HAND UNIT
962x550x742mm
2630039-001
CHBC SLOP HOPPER
RIGHT HAND UNIT
962x550x742mm
2630057-001
NB.: Position of Basin determines whether LHU or RHU
ACCESSORIES
Optional Installation Accessories:
STAINLESS STEEL “P”TRAP
TAP BRACKET
on request
2120128
Support Bracket to fit under tap
to avoid bucket load to tap.
REMOVABLE GRID
7
2630038
Hospital Products
IMAGE
TYPE / MODEL
DIMENSIONS (L X D X W)
PRODUCT CODE
DSBC Drip Sink & Basin Combination
SPECIFICATION MODEL DSBC:
Franke Model DSBC Drip sink wash hand basin combo unit manufactured from
1,2mm thick grade 304 stainless steel with grid, 960x550mm with a 100mm
high integral splash back to the rear with a pressed bowl. A hinged bucket
grid shall be fitted over the drip sink manufactured from 10mm Grade 304
(18/10) Stainless Steel round bar. Unit complete with two 40x40mm square
stainless steel wall mounting gallows brackets. Unit fixed to wall 850mm from
the top of the front apron to the finish floor level with 4 off anchor bolts (bolts
specified elsewhere).
LEFT HAND UNIT
TAP & WASTE FITTING NOT INCLUDED
–– Grade 304 (18/10) Stainless steel.
–– Pressed drip sink bowl.
–– Pressed wash hand basin.
–– Hinged bucket grid
–– Model - DSBC
–– 40x40mm Stainless Steel Square Tube Brackets.
377.5
185
235
85
961
DSBC DRIP SINK
LEFT HAND UNIT
960x550x741mm
2630025
DSBC DRIP SINK
RIGHT HAND UNIT
960x550x741mm
2630025-001
NB.: Position of Basin determines whether LHU or RHU
ACCESSORIES
Optional Installation Accessories:
FRONT VIEW
LEFT HAND UNIT
TAP BRACKET
961
2120128
Support Bracket to fit under tap
to avoid bucket load to tap.
706
481
550
270
170
120
219
255.5
100
TOP VIEW
LEFT HAND UNIT
8
Hospital Products
IMAGE
TYPE / MODEL
DIMENSIONS (L X D X W)
PRODUCT CODE
LDS Drip Sink/ Cleaner Sink
SPECIFICATION MODEL LDS:
Franke model LDS drip sink 600x500x258mm deep manufactured from
Grade 304 (18/10) stainless steel 0,9mm thick and with a 40mm waste
outlet. Unit fitted with stainless steel hinged bucket grid manufactured from
10mm stainless steel round bar and a pair of stainless steel Eagle brackets.
Unit fixed to wall 600mm high from the top of the front apron to the finish floor
level with 4 off anchor bolts (bolts specified elsewhere).
–– Grade 304 (18/10) 0.9mm Stainless Steel
–– Large bowl 43 litres capacity
–– One piece pressed construction
–– Hinged bucket grid
–– Stainless Steel Eagle Brackets.
LDS DRIP SINK
600x500x258mm
ACCESSORIES
Optional Installation Accessories:
TAP BRACKET
TAP & WASTE FITTING NOT INCLUDED
258
283±5
Support Bracket to fit under tap
to avoid bucket load to tap.
FRONT VIEW
600
425
TOP VIEW
9
500
525
2630026
2120128
Hospital Products
IMAGE
TYPE / MODEL
DIMENSIONS (L X D X W)
PRODUCT CODE
DSG Drip Sink/ Cleaner Sink
SPECIFICATION MODEL DGS:
Franke model DSG drip sink 535x454 manufactured from grade 304 (18/10)
stainless steel 1,2mm thick with 100 integrated splash back. Unit is fitted with
hinged bucket grid manufactured from 10mm stainless steel round bar. Unit
complete with two 40x20mm stainless steel wall mounting brackets. Unit fixed
to wall 600mm high from the top of the front apron to the finish floor level with
4 off anchor bolts (bolts specified elsewhere).
–– Grade 304 (18/10) 1.2mm Stainless Steel
–– Pressed bowl 0.7mm Stainless Steel
–– Hinged bucket grid
–– Stainless steel brackets
DSG DRIP SINK
535x454x255mm
2630023
ACCESSORIES
Optional Installation Accessories:
TAP, BOTTLE TRAP & WASTE FITTING NOT INCLUDED
TAP BRACKET
2120128
Support Bracket to fit under tap
to avoid bucket load to tap.
490
25
FRONT VIEW
535
140
490
TOP VIEW
10
Hospital Products
IMAGE
TYPE / MODEL
DIMENSIONS (L X D X W)
PRODUCT CODE
SSW Hospital Surgeon Scrup-Up Units
Wall Mounted Installation
SPECIFICATION MODEL SSW:
Franke model SSW wall mounted Surgeon’s Scrub unit, Length…mm (Please
Specify), manufactured from grade 304 (18/10) stainless steel 1,6mm thick
with 150mm high integral splashback to back, radiused internal corners and
40mm waste outlet/s (please refer to table below). The front and sides of the
unit to be of double walled construction with inner wall sprayed with vermin
proof bitumastic sound deadening approximately 2mm thick.
Unit fitted with removable galvanised mild steel 2mm thick fixing plate. Unit
fixed to wall 900mm high from the top of the front apron to the finish floor
level with anchor bolts (bolts specified elsewhere).
TAP & WASTE FITTING NOT INCLUDED
–– Grade 304 (18/10) Stainless Steel 1.6mm gauge
–– Four standard lengths
–– Hygienic
–– Double walled construction
–– 150mm high splash back
410
460
115
1200
1100
TOP VIEW
1200
1150
FRONT VIEW
460
555
200
150
20
225
SIDE VIEW
WALL MOUNTING PLATE
SUPPLIED WITH UNIT
11
Wall mounting supplied with galvanised fixing plate - SSW
MODEL
length
no. of outlets
PRODUCT CODE
SSW 12
1200mm
1
2630044
SSW 15
1500mm
1
2630045
SSW 18
1800mm
2
2630046
SSW 21
2100mm
2
2630047
Hospital Products
IMAGE
TYPE / MODEL
DIMENSIONS (L X D X W)
PRODUCT CODE
SSF Hospital Surgeon Scrub-Up Unit
Wall & Floor Mounted Installation
SPECIFICATION MODEL SSF:
Franke model SSF floor mounted Surgeon’s Scrub-up unit, Length…mm
(Please Specify), manufactured from grade 304 (18/10) Stainless Steel
1,6mm thick with 150mm high integral splashback to back with radiused
internal corners and provision for 40mm waste outlet/s (Please refer to table
below). The front and sides of unit to be double walled construction with
inner wall sprayed with vermin proof bitumastic sound deadening. Unit with
300x300mm removable inspection panels in the front skirting for access to fit
the waste outlets in the trough. Unit fixed to wall and floor with anchor bolts
(bolts specified elsewhere).
20
1070
610
150
–– Grade 304 (18/10) Stainless Steel 1.6mm gauge
–– Four standard lengths
–– Hygienic
–– Double walled construction
–– 150mm high splash back
MODEL
216.5
SIDE VIEW
1200
no. of outlets
PRODUCT CODE
SSF 12
1200mm
1
2630040
SSF 15
1500mm
1
2630041
SSF 18
1800mm
2
2630042
SSF 21
2100mm
2
2630043
600
530
600
length
TOP VIEW
RECESSED WASTE TO SUIT
40mm WASTE FITTING
Combi Ward Basin
SPECIFICATION:
Franke Combi Ward Basin, 550x550x940mm high, manufactured from grade
304 (18/10 Stainless Steel), with a 700mm splashback. Heavy duty basin
with polished bowl, 360mm diameter with a 40mm waste outlet. Basin fits
over 25mm square Stainless Steel tubular frame bolted to wall with anchor
bolts (anchor bolts specified elsewhere) splashback to accommodate sanitary
accessories, such as soap dispenser and hand dryer or paper towel dispenser.
Tap and accessories sold separately.
TAP AND ACCESSORIES
NOT INCLUDED
–– Grade 304 (18/10) Stainless Steel
–– Pressed seamless bowls designed for the highest level of hygiene and
durability.
–– Basin fits over a 25mm square Stainless Steel framework (supplied with
basin) Basket strainer 90mm waste
–– Designed to facilitate fitting of a hands free tap, soap dispenser, paper
towel dispenser or hand dryer (accessories and tap not included)
–– Hygienic and vandal resistant
940
698,8
550
940x550x940mm
2520010
241,2
550
COMBI WARD BASIN
FRONT VIEW
TOP VIEW
12
Hospital Products
IMAGE
TYPE / MODEL
DIMENSIONS (L X D X W)
PRODUCT CODE
SMS Surgeon Mini Scrub-Up Unit
SPECIFICATION MODEL SMS:
Franke model SMS surgeon scrub-up unit, size 665x554x258mm deep
manufactured from grade 304 (18/10) stainless steel 1,6mm thick complete
an integral splash back 300mm high with tap holes for a medical elbow action
mixer. Unit with a pressed bowl 525x425x258mm deep manufactured from
grade 304 (18/10) stainless steel 0.9mm thick with a 90mm waste outlet
for a basket strainer fitting (included with unit). Unit fitted with removable
galvanised mild steel 1,6mm thick fixing plate. Unit fixed to wall 900mm high
from the top of the front apron to the finish floor level with anchor bolts (bolts
specified elsewhere).
–– Grade 304 (18/10) Stainless Steel 1.6mm gauge
–– Pressed bowl 525x425x258mm deep with 42 litres capacity 0.9mm
Gauge
–– 300mm high splashback
–– Basket strainer 90mm waste
–– Wall mounted
–– Ideal for clinics, wards and veterinary applications
665
RECOMMENDED MIXER:
–– Cobra Model 508 - 15mm elbow action medical mixer.
525
TOP VIEW
554
425
SMS SURGEON MINI
SCRUB-UP UNIT
RECESSED WASTE TO
SUIT Ø40mm WASTE
665
560
300
Ø22
350
40
180
FRONT VIEW
GALVANISED WALL FIXING PLATE
13
665x554x258mm
2630049
Hospital Products
IMAGE
TYPE / MODEL
DIMENSIONS (L X D X W)
PRODUCT CODE
PP Plaster Of Paris Preparation Sink
SPECIFICATION MODEL PP:
Franke model PPGL size (please specify) Plaster of paris preparation sink
manufactured from grade 304 (18/10) stainless steel 1,2mm thick with a
150mm high integral splashback to the rear. The unit shall be fitted with a
pressed preparation bowl measuring 525x425x258mm deep with a 40mm
waste outlet discharging into a waste cylinder measuring 250mm and 535mm
deep. Waste cylinder fitted with stainless steel lid and removable strainer with
provision for 40mm waste outlet. The underside sprayed with vermin proof
bitumastic sound deadening and has a galvanised mild steel backing sheet.
Unit fixed 900mm high from the top of the front apron to the finish floor level
with anchor bolts (bolts specified elsewhere).
Please refer to options for fixing below.
RIGHT HAND BOWL
Grade 304 (18/10) Stainless Steel, 1.2mm gauge
–– Plaster bowl with removable stainless steel strainer and lid
–– Rinse bowl discharging into plaster bowl
–– Hospital bead to prevent spillage
–– Pressed seamless bowls designed for the highest level of hygiene and
durability.
1500
885
130
550
60
425
280
65
525
length
BOWL POSITION
PP
1500x550x1064mm
Plaster of Paris
Preparation Sink
Left Hand Side
2630032
PP
1500x550x1064mm
Plaster of Paris
Preparation Sink
Right Hand Side
2630033
PRODUCT CODE
Non-standard sizes available on request
1050
105
810
400
150
200
TOP VIEW
MODEL
Ø48
Ø254
SIDE VIEW
Fixing Options For Plaster Of Paris Sink
STAINLESS STEEL GALLOWS BRACKETS WITH FRONT LEG
Gallows Brackets with Front Legs manufactured from grade 304(18/10)
stainless steel 40x40mm x 1,2mm thick square tubing. The front leg is
detachable and is fitted with chrome plated adjustable flanged foot pieces.
*These brackets are used in areas where the floors have coved
skirting.
GALLOWS BRACKET WITH REMOVABLE FRONT LEG
STAINLESS STEEL CANTILEVER BRACKETS
Cantilever Brackets manufactured from grade 304(18/10) stainless steel
40x40mm x 1,2mm thick square tubing.
*These brackets are used in areas where the floors have coved
skirting and the design makes cleaning under the unit very easy.
40 X 40MM SQUARE
GALLOWS BRACKET
N/A
1 pair
2120025
40 X 40MM SQUARE
GALLOWS BRACKET
WITH DETACHABLE
FRONT LEG
1 pair
units 2400 mm
and longer require
additional bracket
and leg
2120035
14
Hospital Products
IMAGE
TYPE / MODEL
DIMENSIONS (L X D X W)
PRODUCT CODE
MSS Medical Sink Single Bowl
SPECIFICATION MODEL MSS:
Franke Model MSS Single Bowl Sink 650x650x258mm manufactured from
Grade 304 (18/10) Stainless Steel, 1,2mm gauge with 50x 10 mm apron
all round. Sink with a pressed bowl 525x425x258mm deep (43 litres) with
a 40 mm waste outlet. Unit is fitted with stainless steel gusset brackets for
securing the sink to the wall. (Front legs are optional).
–– Pressed bowls 650x650x258mm deep
–– Grade 304 (18/10) Stainless Steel 1.2mm gauge
–– 43 Litre Bowl Capacity
650
525
175
94
2x Ø22
MSS Single Bowl Sink
2620259
650
Waste fitting not included
425
TOP VIEW
650x650x258mm
STD Ø40mm WASTE
650
SIDE VIEW
MSD Medical Sink Double Bowl
SPECIFICATION MODEL MSD:
Franke Model MSD Double Bowl Sink 1200x650x258mm manufactured from
Grade 304 (18/10) Stainless Steel, 1,2mm gauge with 50x 10 mm apron
all round. Sink with a pressed bowls 525x425x258mm deep (43 litres) with
a 40 mm waste outlet. Unit is fitted with stainless steel gusset brackets for
securing the sink to the wall. (Front legs are optional).
–– Pressed bowls 1200x650x258mm deep
–– Grade 304 (18/10) Stainless Steel 1.2mm gauge
–– 43 Litre Bowl Capacity
MSD Double Bowl Sink
1200
50
525
50
175
Waste fittings not included
50
2 x Ø22 (TYP)
TOP VIEW
650
15
SIDE VIEW
650
425
94
175
525
1200x650x258mm
2 x STD Ø40mm WASTE
2620290
Hospital Products
IMAGE
TYPE / MODEL
DIMENSIONS (L X D X W)
PRODUCT CODE
CBDT Baby Bath - Inset Type
SPECIFICATION MODEL CBDT:
Franke model CBDT inset baby Bath, size 915x550x150mm deep,
manufactured from Grade 304 (18/10) stainless steel 1,2mm thick. Unit
with a one piece pressed semi circular bowl measuring 695x385x150mm
deep with provision for 40mm waste outlet. Unit to be fixed into worktop and
secured with fixing clips supplied. Cut out size 855x490mm.
–– Grade 304 (18/10) 1.2mm Stainless Steel
–– Hygienic and durable
–– Pressed semi-circular bowl 0.9 gauge with a 40mm waste outlet
CBDT BABY BATH
915
102
695
915x550x150mm
2630031
118
385 55
0
RECESSED WASTE TO
SUIT - 40mm WASTE
235
TOP VIEW
150
140
SIDE VIEW
16
Hospital Products
IMAGE
MODEL
DIMENSIONS
BOWL POSITION
PRODUCT CODE
CB Baby Bath
Wall & Floor Mounted Installation
SPECIFICATION MODEL CB:
Franke model CB Baby Bath 1500x555mm manufactured from grade 304
(18/10) stainless steel 1,2mm thick with a 150mm integral splash back to
the rear. Unit to be fitted with one piece pressed semi circular bowl measuring
695x385x150mm deep with a 40mm waste outlet. The underside of the
drainer shall have a vermin proof bitumastic sound deadening supported with
a galvanized backing sheet. Unit fixed 900mm high from the top of the front
apron to the finish floor level with anchor bolts (bolts specified elsewhere).
Please refer to options for fixing below.
–– Grade 304 (18/10) 1.2mm Stainless Steel
–– Hygienic and durable
–– Pressed semi-circular bowl 0.9 Gauge
TAP NOT INCLUDED
CB FLOOR MOUNTED INSTALLATION
CB
1500x555mm
Left Hand Side
2630029
CB
1500x555mm
Right Hand Side
2630030
CB
1320x555mm
Left Hand Side
2630028
CB
1320x555mm
Right Hand Side
2630028-001
RECESSED WASTE TO
SUIT - 40mm WASTE
CB WALL & FLOOR MOUNTED
INSTALLATION
RIGHT HAND BOWL
Fixing Options For Baby Baths
STAINLESS STEEL ROUND LEGS
Round Legs manufactured from grade 304(18/10) stainless steel 41mm
diameter x 1,2mm thick round tubing. Legs to be detachable and fitted with
chrome plated adjustable flanged foot pieces.
40mm DIAMETER ROUND LEG (PAIR)
17
40 x 40mm SQUARE LEG (PAIR)
STAINLESS STEEL SQUARE LEGS
Square Legs manufactured from grade 304(18/10) stainless steel 40x40mm
x 1,2mm thick square tubing. Legs to be detachable and fitted with chrome
plated adjustable flanged foot pieces.
40MM DIAMETER
ROUND LEGS
units 2400 mm
and longer require
additional legs
2 pairs
2120028
40 X 40MM SQUARE
LEGS
units 2400 mm
and longer require
additional legs
2 pairs
2120029
Hospital Products
Hospital Products
IMAGE
METHOD
dimensions (LXW) fixing method
PRODUCT CODE
Stainless Steel Bath
For Burn & Wound Treatments
SPECIFICATION:
Franke model Stainless Steel Bath, size 1800x760x403mm deep, manufactured
from Grade 304 (18/10) stainless steel 1.6mm thick. The unit shall be fitted
with a fabricated semi circular bowl measuring 1580x608x400mm deep
with provision for 40mm waste outlet. Please specify Tap Hole/s diameter
if required.
–– Grade 304 (18/10) 1.6mm Stainless Steel
–– Hygienic and durable
–– Fabricated semi-circular bowl
WASTE FITTINGS NOT INCLUDED
1800
120
1580
100
50
400
1240
SIDE VIEW
760
76
76
OPTIONAL:
–– Stainless Steel frame and legs for bath size 1775x735x550mm high
manufactured from 40x40x1,2mm thick square stainless steel tubing with
40x6mm floor fixing flanges to secure the frame to the floor. (bolts specified
elsewhere).
STAINLESS
STEEL BATH
1800x760mm
To Brick and Mortar or
2630054
OPTIONAL
BATH FRAME
WITH LEGS
1775x760mm
Bath Frame with legs
available
2630055
400
FRONT VIEW
1800
• 22
760 188
RECESSED WASTE TO
SUIT - 40mm WASTE
TOP VIEW
OPTIONAL BATH FRAME WITH LEGS
18
FRANKE MORTUARY PRODUCTS
autopsy tables, trolleys, body racks,
trays, instrument cabinets, writing deskS,
shelving & ventilated mortuary equipment.
Franke is a leading supplier of high grade stainless steel equipment to
mortuaries and post mortem rooms.
Franke is certified to ISO9001: 2008 quality management standards.
Our designs and construction ensure that our products meet the
demands of safety, hygiene and quality.
Uncompromising when it comes to quality, innovation and design.
Mortuary Products
IMAGE
TYPE / MODEL
Dimensions (L X d x h)
PRODUCT CODE
Model KZ Autopsy Table
SPECIFICATION MODEL KZ:
2500
100
100
191
341
ELECTRIC
POINT COVER
Ø26
Ø6
939
939
FRONT VIEW
770
305
850
750
FEATURES:
- Manufactured in grade 316 L laboratory stainless steel
- Heavy duty construction with 2 mm gauge top and 1.6mm panels
- Heavy duty pedestal for fixing to plinth
- Removable panels for inspection and maintenance
- Ergonomic design to facilitate free operator movement
- Removable grid overflow
- Integral rinsing system with cold water control and flexible 3m flexible hose and spray nozzle
- Integrated 110mm Ø stainless steel waste outlet for connection to
PVC S-trap
- Provision for electrical plug point connection
- Sloped corners and edges to facilitate easier cleaning
- Removable catch grid fitted to specially designed fixing lugs to
edge of bowl
MODEL KZ
AUTOPSY TABLE
550
SIDE VIEW
21
951
Franke Model KZ Autopsy Table 2500x770x850 mm to be manufactured from
grade 316 L, gauge 2.0 mm stainless steel sloping towards bowl and fitted
with 2 x diamond spreaders plumbed to cold water supply. Both spreaders
to be plumbed to 15mm copper tube connected to stop cock. The entire
worktop and area below bowl is to be equipped with removable inspection
panels to conceal plumbing and all joints shall feature a return bend to
prevent water creep. Bowl 350x500x200 mm deep to be manufactured
from grade 316 L, gauge 1.6 mm integrated stainless steel flush pipe of 110
mm Ø for connection to PVC S-trap. Bowl to be equipped with removable
catch grid fitted to the edge of bowl using two fixing lugs fuse welded to
bowl. The bowl shall be equipped with a removable perforated stainless steel
overflow with handle and diamond spreade, stop cock and 1 x 3 Meter flexible
hose connected to hand controlled demand trigger spray. Pedestal to be
manufactured with a reinforced base for securing to plinth using 4 off 10mm
Ø stainless steel anchor bolts.
2500x770x850mm
2630065
OPTIONAL
Electrical Plug Point: The units shall be fitted with a 3-point electrical water
proof plug adjacent to plumbing fittings.
Mortuary Products
IMAGE
TYPE / MODEL
Dimensions (L X d x h)
PRODUCT CODE
Ventilated Disection Table with Docking Trolley
SPECIFICATION:
Franke Back Draft Ventilated Dissection Table with Docking Trolley
2250 mm x 950mm wide x 1350 mm high manufactured from grade 316
stainless steel. The unit is fitted with a bowl size 860 x 550 x 200 mm deep
with a 110 mm outlet pipe and a sump 1256 x 550 with a 110 mm outlet
pipe, sparge pipes, ventilation duct and a removable body tray.
Plumbing fittings: The table shall be equipped with 3 x stop cocks and 1 x 3
Meter flexible hose connected to hand controlled demand trigger spray.
FEATURES:
- Manufactured in grade 316 L laboratory stainless steel
- Heavy duty construction with internal support frame
- Sloped corners on sump to facilitate easier cleaning
- Removable inspection panels for maintenance
- Integral rinsing system with cold water control and 2x flexible hoses with
spray nozzles
- Integrated Ø 110mm stainless steel waste outlet for connection to PVC
Gulley Trap
- 2x Removable grid waste traps
- Provision for electrical plug point connection points (optional)
VENTILATED DISECTION TABLE:
950
2250
VENTILATED DISECTION
TABLE
2250x950x1350mm
2630134
DOCKING TROLLEY
1722x832x900mm
2630136
OPTIONAL
Electrical Plug Point: The units shall be fitted with a 3-point electrical water
proof plug adjacent to plumbing fittings.
FRONT VIEW
1350
400
950
SIDE VIEW
DOCKING TROLLEY:
1772
1722
1611
5
505
446
605
200
100
A
A
FRONT VIEW
745
787
832
672
394
SIDE VIEW
22
Mortuary Products
IMAGE
TYPE / MODEL
Dimensions (L X d x h)
PRODUCT CODE
MTS Post Mortem Table
SPECIFICATION MODEL MTS:
Franke Model MTS Post Mortem Table and sink 2565x765x865mm high,
manufactured from Grade 304 (18/10) stainless steel 1,6mm thick. Rinse
bowl 500x500x230mm deep pressed bowl with a 40mm waste outlet.
The underside sprayed with vermin proof bitumastic sound deadening and
supported with a 30x30x3mm framework and galvanised mild steel backing
sheet. Unit is fitted on to six 40mm stainless steel legs and cross braces, each
leg fitted with adjustable flanged foot piece. Unit fixed 900mm high from the
top of the front apron to the finish floor level with anchor bolts (bolts specified
elsewhere).
Tap & waste fitting not included
-
-
-
-
2565
2520
620
565
65
Grade 304 (18/10) 1.6mm Stainless Steel
Recessed slab with 30mm deep ledge
One Piece pressed rinse bowl
Sound deadened with galvanised backing sheet
765
685
500
OPTIONAL FITTINGS:
–– Cobra Model 515-21 15mm elbow action medical mixer with swan-neck
swivel outlet.
–– Cobra Model 519-21 15mm elbow control hand spray set.
MTS POST MORTEM TABLE
Recessed Waste To
Suit - 40mm waste
2565x765 x900mm
2630021
900
75
230
TOP VIEW
FRONT VIEW
MT Post Mortem Table
SPECIFICATION MODEL MT:
Franke Model MT Post Mortem Table 1980x765x900mm high manufactured
from grade 304 (18/10) stainless steel 1,6mm thick. Slab constructed with
30mm deep recess all round with a built in fall towards the 40mm waste
outlet. The underside sprayed with vermin proof bitumastic sound deadening
and supported with a 30x30x3mm framework and galvanised mild steel
backing sheet. Unit is fitted on to four 40mm stainless steel legs and cross
braces, each leg fitted with adjustable flanged foot piece. Unit fixed 900mm
high from the top of the front apron to the finish floor level with anchor bolts
(bolts specified elsewhere).
- Grade 304 (18/10) 1.6mm Stainless Steel
- Recessed slab with 30mm deep ledge
- Sound deadened with galvanised backing sheet
1980
1900
685
765
OPTIONAL FITTINGS:
–– Cobra Model 519-21 15mm elbow control hand spray set.
152
MT POST MORTEM TABLE
Recessed Waste To
Suit - 40mm waste
23
FRONT VIEW
900
690 .
75
TOP VIEW
1980x765x900 mm
2630105
Mortuary Products
IMAGE
TYPE / MODEL
2120
2080
2040
Dimensions (L X d x h)
PRODUCT CODE
2075
FEATURES OF THE FRANKE MODULAR BODY RACKS
- Manufactured in grade 304 stainless steel
- Modular design for multiple combinations with
variable shaft and roller assemblies to suite various cold room dimensions.
- Solid 16 mm Ø roller shafts
- Nylon rollers to suite body tray handles
- Durable design with 40 x 40 x 1.5mm gauge square tubing Posts
and 3 mm gauge stainless steel “U” shaped Bearers
- Adjustable stainless steel foot piece
FRONT VIEW
Franke Single Body Rack
926
826
SPECIFICATION:
Franke Model Single Body Racks connected in series to form “x No.” of banks
(Please specify). All racks manufactured from grade 304 stainless steel with
40 x 40 x 1.5 mm gauge square tubing Post and 3 mm gauge stainless steel
“U” shaped Bearers. All shafts to be from solid 16 mm Ø stainless steel
and fitted with nylon rollers and stainless steel circlips. All joints to be fuse
welded. All racks to be joined together at the top of each fixing post with a 40
x 40 x 6 mm gauge stainless steel angle stay to stabilize the banks body trays.
All bearers and stays shall be bolted with 8 mm stainless steel bolts and each
post shall be fitted with an adjustable stainless steel foot piece.
2075
2075
726
626
T4 SINGLE BODY RACK FOUR TIER
SIDE VIEW
SIDE VIEW
826
626
826
2075
SIDE VIEW
SIDE VIEW
870
843
820
250
675
2075
675
450
250 450
450
2075
SIDE VIEW
T3 OBESE SINGLE
2120x926x2075mm
BODY RACK - THREE TIER
2630069
SPECIFICATION:
Franke Model Double Body Racks connected in series to form “x No.” of
banks (Please specify). All racks manufactured from grade 304 stainless steel
with 40 x 40 x 1.5 mm gauge square tubing Post and 3 mm gauge stainless
steel “U” shaped Bearers. All shafts to be from solid 16 mm Ø stainless steel
and fitted with nylon rollers and stainless steel circlips. All joints to be fuse
welded. All racks to be joined together at the top of each fixing post with a 40
x 40 x 6 mm gauge stainless steel angle stay to stabilize the banks body trays.
All bearers and stays shall be bolted with 8 mm stainless steel bolts and each
post shall be fitted with an adjustable stainless steel foot piece.
T4 DOUBLE BODY RACK - 2120x1352x2075 mm
FOUR TIER
2630067
T3 OBESE DOUBLE
2120x1725x2075mm
BODY RACK - THREE TIER
2630070
Franke Addtional Obese Multi-bank Extention
- Three Tier
SPECIFICATION:
Franke Multi-Bank Extention manufactured from grade 304 stainless steel to
form required 3 banks or more.
475
475
665
654
615
2630066
Franke Double Body Rack
1752
1652
2075
626
1352
1252
2120x726x2075mm
SIDE VIEW
MULTI-BANK EXTENTION 2120x665x2075mm
2630068
OBESE MULTI-BANK
EXTENTION
2630071
2120x870x2075mm
24
Mortuary Products
IMAGE
TYPE / MODEL
Dimensions (L X d x h)
PRODUCT CODE
Fabricated BTS Body Tray
SPECIFICATION MODEL BTS:
Franke Fabricated Body Tray manufactured in grade 304 stainless steel,
complete with 25 mm Ø round stainless steel frames to bottom and handles.
- Grade 304 stainless steel
- Designed to suit Franke model T4 body racks
- 50 mm depth forensic body tray
530
555
2160
1960
BTS STANDARD
BODY TRAY
2160x555mm
2630078
BTS OBESE
BODY TRAY
2160x756mm
2630072
A
STANDARD BTS BODY TRAY - TOP VIEW
530
756
2160
1960
A
OBESE BTS BODY TRAY - TOP VIEW
Pressed Body Tray
SPECIFICATION:
Franke Pressed stainless steel body tray manufactured from grade 304
(18/10) stainless steel 1,2mm thick, with a 20mm square tubing frame all
round, two 25mm diameter support fitted longitudinally to the underside for
the Rapid Transfer System and two 20mm diameter stainless steel handles.
- Choice of Grade 304 or 316 (18/10) 1.2mm Stainless Steel
- Hygienic and durable
2090
1930
565
Ø40
AA
125
STANDARD PRESSED BODY TRAY - TOP VIEW
1930
665
Ø40.5
AA
125
OBESE PRESSED BODY TRAY - TOP VIEW
25
STANDARD
BODY TRAY 304
2095x567mm
2630062
STANDARD
BODY TRAY 316
2095x567mm
2630076
OBESE
BODY TRAY 304
2095x667mm
2630061
OBESE
BODY TRAY 316
2095x667mm
2630077
Mortuary Products
IMAGE
TYPE / MODEL
Dimensions (L X d x h)
PRODUCT CODE
Franke Model TT Transport Trolley
SPECIFICATION MODEL TT:
Franke Model TT Transport trolley 2000 x 672 x 850 mm high manufacture
from grade 304 stainless steel tubular frame. Trolley fitted with 125 mm
diameter bolt type castors and rubber bumpers.
- Grade 304 stainless
- Castors 125 mm diameter non marking grey rubber
- Designed to suit Franke models BTS and BTO sliding body trays
TT TRANSPORT TROLLEY 2000x672x850mm
2630073
672
2000
1420
40 250
850
915
250 40
311 50 311
SIDE VIEW
FRONT VIEW
Franke Model TLT Tilting Trolley
SPECIFICATION MODEL TLT:
Franke Model TT standard Tilting trolley 2000 x 672 x 858 mm high
manufacture from grade 304 stainless steel tubular frame. Trolley fitted with
125 mm diameter bolt type castors and rubber bumpers.
- Grade 304 stainless
- Castors 125 mm diameter non marking grey rubber
- Designed to suit Franke models BTS and BTO sliding body trays
TLT TILTING TROLLEY
2000x672x858mm
2630075
2000
785
150
520
350
847
150
1500
FRONT VIEW
SIDE VIEW
26
Mortuary Products
IMAGE
TYPE / MODEL
Dimensions (L X d x h)
PRODUCT CODE
Franke Model ET Transport Trolley
SPECIFICATION MODEL ET:
Franke Model ET Standard Hydraulic Lifting trolley 2005 x 816 x 360 mm
minimum height and 1850 mm maximum height specially designed for sliding
body trays manufacture from grade 304 stainless steel tubular frame. Trolley
fitted with 125 mm diameter bolt type castors and shafts and rollers to suit
sliding body trays. To be fitted with a hand operated pump connected to
hydraulic cylinder with a maximum lifting load of 250 kg.
LIFTING TROLLEY
Able to raise up to
1.85 Meters High
-
-
-
-
-
-
Grade 304 stainless
Castors 125 mm diameter non marking grey rubber
Suitable for receiving Franke models BTS and BTO sliding body trays
Designed to suit Franke models T3 and T4 body racks
Foot Operated Pump
Hydraulic Cylinder (Max lifting load: 250 kg)
ET ELEVATION TROLLEY
728
2220
300±5
TOP VIEW
±1.65m
SIDE VIEW
SIDE VIEW - ELEVATED
27
2220 (L) x 728 (D) mm
min height: 360mm
max height: 1850mm
2630074
Mortuary Products
IMAGE
TYPE / MODEL
Dimensions (L X d x h)
PRODUCT CODE
Instrument Cabinet
900
300
300
445
600
A
A
SPECIFICATION:
Franke Model Wall Mounted Instrument Cabinet manufactured from grade
316 stainless Steel 1,6 mm thick with two hinged doors with shatterproof
glass panel. Doors are lockable and are supplied with two keys. Unit has two
stainless steel shelves and is provided with two key hole slots for mounting
the unit to the wall.
FRONT VIEW
200
300
275
200
600
200
- Wall mounted
- Complete with two doors fitted with shatter proof glass panels
and a Cam lock
- Manufactured from 1.6 mm Thick Grade 316L Stainless Steel
INSTRUMENT CABINET
900x300x600mm
2630063
SECTION A -SIDE VIEW
Writing Desk
241
120
A
130
300
570
350
550
SECTION SIDE VIEW
900
300
A
A
SPECIFICATION:
Franke Model Wall Mounted Writing Desk manufactured from grade 316 L
stainless steel with a single front drawer on smooth running telescopic slides.
The unit has supa-wood backing to provide a firm no flex stainless steel writing
surface. Base is removable for easy mounting.
-
-
- -
Wall mounted
Single Drawer to front mounted on telescopic drawer slides
Supa–wood backing to prevent denting of top
Manufactured from 1.6 mm thick grade 316L Stainless Steel
WRITING DESK
900x570x300mm
2630064
FRONT VIEW
28
Supplied Mortuary Projects
29
AVT 2 - Rapid Transfer Table
AVT 2 - Rapid Transfer Table with pressed body tray
DVT - WALL BENCH AND WRITING DESK
PRESSED BODY TRAYS
INSTRUMENT CABINETS
AUTOPSY TABLES
z-series shelving and pot sink
ch slop hopper
Deko Instrument Disinfectors
IMAGE
TYPE / MODEL
PRODUCT CODE
DEKO 260 Washer Disinfector
SPECIFICATION:
DEKO Model 260 instrument washer disinfector, 650 x 625 x 1850 mm,
manufactured from Grade 304 stainless steel with an internal washing
chamber no less than 507 x 507 x 485 mm. The unit must be fitted with
adjustable feet and be freestanding. The Instrument washer must comply
with the ISO 15883-1, 15883-2 specification. The unit must have a built in
circulation pump of no less than 700l per minute to compensate for any drop
in incoming water pressure. Interlocking front–opening door with safety lock.
DEKO 260 Base Model
2800003
DEKO 2200 Instrument Dryer
SPECIFICATION:
DEKO Model 2200 Dryer cabinet, 785 x 810 x 1970mm, manufactured
from Grade 304 stainless steel with an internal drying chamber not
less than 700 x 700 x 1255 mm. Dryer must be manufactured with a
minimum of 8 tiers to accommodate instrument trays and An-tubes.
The Dryer is to be manufactured with an integrated air filter. The unit
to be manufactured with adjustable cycle time of 1- 99 minutes and
a continuous cycle. The unit must have a minimum of five programs
and a variable temperature setting of up to 90 degrees Celsius with a
cycle time indicator.
DEKO 2200 Base Model
2800002
30
General Products
IMAGE
TYPE / MODEL
Dimensions (L X d x h)
PRODUCT CODE
Z-Series Shelving
SOLID SHELF
30 mm
Up-Stand with
Safe Edge at
back of shelf
Ends are
closed off
SPECIFICATION:
Franke Model Z-Series Adjustable Shelving manufactured from grade 18/10
Stainless Steel 1,2mm thick. One piece shelf and integrated bracket with a
25mm apron to front and sides with 30mm turn up at back and safety edge
on corners.
25 x 10 mm
Apron to front
SPECIFICATION - WALL BANDS:
Franke Model Z-Series Wall Bands manufactured from grade 18/10 Stainless
Steel 1,2 mm thick. Available in 1000 mm; 1500 mm and 1800 mm Lengths
and are double slotted to allow for two shelves to be lined up next to each
other on a single wall band with very little space between shelves.
PERFORATED SHELF
- Modular – easy to assemble, expand and adjust
- Durable – constructed and designed to the highest standards of
strength and hygiene
25 mm
Up-Stand with
Safe Edge at
back of shelf
Ends are
closed off
OPTIONAL EXTRAS:
–– Grade 316 Stainless Steel, Solid or Perforated Shelves, 300 or 400 mm
Wide Shelves
STANDARD SHELVING SIZES
25 x 10 mm
Apron to front
Preforated Shelf with Ø10
mm holes and a staggered
pitch of 25 mm
Z-SERIES DOUBLE SLOTTED WALL BANDS
1000mm OR 1500mm OR 1800 Lengths
SOLID
900x300 mm
2620036
PERFORATED
900x300 mm
2620035
SOLID
900x400 mm
2620037
PERFORATED
900x400 mm
2620038
SOLID
1200x300 mm
2620040
PERFORATED
1200x300 mm
2620039
SOLID
1200x400 mm
2620042
PERFORATED
1200x400 mm
2620041
NON-STANDARD SIZES AVAILABLE ON REQUEST
319mm OR 419mm
wide
300mm OR 400mm
wide
30mm Up-Stand
25mm Apron
(Shelf bracket included)
SIDE VIEW
31
2620125
1000 mm
2620124
1500 mm
2620126
1800 mm
General Products
IMAGE
TYPE / MODEL
Dimensions (L X d x h)
PRODUCT CODE
Fastrack Modular Shelving
SPECIFICATION:
Franke Model Fastrack Modular Shelving Solid/Louvred (please specify)
Shelves manufactured from 1.2mm thick grade 304 (18/10) stainless steel
with die cast aluminium corner brackets for fixing to Ø 25mm vertical posts.
Posts are made from 1.2mm thick Ø 25mm diameter stainless steel and fitted
with end caps at one end and adjustable foot piece.
–– Modular – easy to assemble, expand and adjust
–– Mobile – suitable for many applications
–– Durable – constructed and designed to the highest standards of strength
and hygiene
OPTIONAL EXTRAS:
–– Set of four castors 125mm ø/two lockable
type of shelf
dimensions (lxw)
PRODUCT CODE
Standard Shelving Sizes
FRONT VIEW
Solid
750x400mm
2620051
Solid
750x500mm
2620055
Louvred
750x400mm
2620059
Louvred
750x500mm
2620063
Solid
1000x400mm
2620052
Solid
1000x500mm
2620056
Louvred
1000x400mm
2620060
Louvred
1000x500mm
2620064
Solid
1250x400mm
2620053
Solid
1250x500mm
2620057
Louvred
1250x400mm
2620061
Louvred
1250x500mm
2620065
Solid
1500x400mm
2620054
Solid
1500x500mm
2620058
Louvred
1500x400mm
2620062
Louvred
1500x500mm
2620066
Non-standard sizes available on request
Stainless steel posts with 1,2mm wall thickness 25mm ø:
1000mm
2620027
1500mm
2620028
1800mm
2620029
2000mm
2620030
Non-standard sizes available on request
Posts with castors:
1000mm
2620031
1500mm
2620032
1800mm
2620032-001
2000mm
2620033
SIDE VIEW
32
FRANKE SOUTH AFRICA
CALL CENTRE
Tel 0861 372 653
Fax 0866 592 073
enquiry.fsa@franke.com
www.franke.co.za
DURBAN
1194 South Coast Road,
Mobeni, Durban, 4092.
South Africa
Tel +27 31 450 6300
Fax +27 31 450 6304
GAUTENG
77 Roan Crescent,
Sage Corporate Park North,
Old Johannesburg Road,
Midrand, 1682
South Africa
CAPE TOWN
Unit 1, 10 Gold Street,
Northgate Business Park, Northgate Estate,
Cape Town, 7405
South Africa
DISCLAIMER
The information and dates supplied in this brochure are based on
the information believed to be reliable, however are not binding
and inaccuracies may occur. Franke reserves the right to change
Specification and design at any time without notice.
© 2017 by Franke South Africa. All rights reserved under the
Copyright Act of 1987 with the amendments. Reproduction of any of
the content, full or partial, is allowed only with prior written approval
of Franke South Africa. No reasonable requests will be refused
provided the conditions as laid out are met.
makeitwonderful.co.za
FSA1702